nova Chuck Accessory Jaws
Transcription
nova Chuck Accessory Jaws
nova Chuck Accessory Jaws TM Precision Midi SuperNova2 Nova G3 Ideal for those with lathes up to 12”/300mm swing. Takes all the accessory jaws, although only those designed for smaller work are recommended for use on the Precision Midi. Available in insert/adaptor versions and Ideal for those lathes with swing between 14” and 16”. Great gearded chuck for smaller lathes. Takes all the accessory jaws, although only those designed for smaller work are recommended for use on the G3. Available in insert versions and dedicated threaded versions. dedicated threaded versions. Nova Titan Ideal for those with lathes up to 20”/508mm swing. Brilliant all-round geared chuck for a majority of users. Takes all the accessory jaws. Available in insert/adaptor versions and dedicated threaded versions. Ideal for those with lathes with 24”/609mm swing and larger. Takes all accessory jaws. The super aggressive holding power of this geared chuck is amazing! Chuck Accessory Jaw Travel Table (Inch) Jaw Set Mini 20mm Jaws Mini Spigot Jaws 25mm JAW Mini Step JAW PIN JAW 35mm Bowl JAW 50mm JAW STEP JAW 35mm SPIGOT JAW 45mm SPIGOT JAW 70mm Jaws 75mm BOWL JAW Long Nose JAW 100mm JAW 130mm JAW POWERGRIP JAW TITAN POWERGRIP JAW Suitable Chuck Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi Step 1 Precision Midi Step 2 Nova G3 Step1 Nova G3 Step2 SN2 Step 1 SN2 Step 2 Titan Step1 Titan Step2 Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 Step 1 Nova G3 Step 2 Nova G3 Step 3 SN2 Step1 SN2 Step2 SN2 Step3 Titan Step1 Titan Step2 Titan Step3 Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3** SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Expanding Action Specifications Min Max 0.79 1.63 0.79 1.63 0.79 1.63 0.79 2 1 1.77 1 1.77 1 1.77 1 2.16 1.024 1.417 1.024 1.811 1.024 1.811 1.024 2.205 1.06 1.93 1.45 2.28 1.06 1.93 1.45 2.28 1.06 1.93 1.45 2.28 1.06 2.32 1.45 2.72 1.024 1.378 1.024 1.811 1.024 1.811 1.024 2.244 1.496 1.850 1.496 2.323 1.496 2.323 1.496 2.717 2.008 2.402 2.008 2.835 2.008 2.835 2.008 3.228 Not Recommended Not Applicable Not Applicable 3.051 3.839 Not Applicable Not Applicable 3.051 3.839 Not Applicable Not Applicable 3.051 4.272 2.047 2.402 2.047 2.835 2.047 2.835 2.047 3.268 2.047 2.402 2.047 2.835 2.047 2.835 2.047 3.228 2.76 3.54 2.76 3.54 2.76 3.54 2.76 3.94 Not Recommended 3.189 4.016 3.189 4.016 3.189 4.409 Not Recommended 2.126 2.874 2.126 2.874 2.126 3.346 Not Recommended 3.819 4.646 3.819 4.646 3.819 5.039 Not Recommended Not Recommended 5.000 5.787 5.000 6.181 Not Recommended Not Recommended 3.740 4.567 3.740 4.961 Not Recommended Not Recommended Not Recommended 4.961 6.181 Contracting Action Specifications Jaw Set & Chuck Suitability Square Stock Spigot Mode Jaw Set Min Min Max 0.39 0.79 0.39 0.79 0.39 0.79 0.39 1.18 0.39 1.22 0.39 1.22 0.39 1.22 0.39 1.61 0.354 0.709 0.354 1.102 0.354 1.102 0.354 1.496 Not Applicable 0.36 1.1 Not Applicable 0.36 1.1 Not Applicable 0.36 1.1 Not Applicable 0.36 1.5 0.276 0.669 0.276 1.102 0.276 1.102 0.276 1.496 0.315 0.709 0.315 1.142 0.315 1.142 0.315 1.535 1.220 1.614 1.220 2.047 1.220 2.047 1.220 2.441 Not Recommended 1.181 2.008 1.417 2.244 1.772 2.598 1.181 2.008 1.417 2.244 1.772 2.598 1.181 2.402 1.417 2.638 1.772 2.992 0.984 1.378 0.984 1.772 0.984 1.772 0.984 2.165 1.220 1.575 1.220 2.008 1.220 2.008 1.220 2.402 1.46 2.56 1.46 2.56 1.46 2.56 1.46 2.95 Not Recommended 1.339 2.165 1.339 2.165 1.339 2.480 Not Recommended 1.142 1.969 1.142 1.969 1.142 2.402 Not Recommended 2.205 3.031 2.205 3.031 2.205 3.425 Not Recommended Not Recommended 3.031 3.819 3.031 4.213 Not Recommended Not Recommended 2.165 2.992 2.165 3.386 Not Recommended Not Recommended Not Recommended 3.031 4.252 Max 0.32 1.18 0.32 1.18 0.32 1.18 0.32 1.57 0.32 1.18 0.32 1.18 0.32 1.18 0.32 1.57 0.394 0.787 0.394 1.220 0.394 1.220 0.394 1.614 Not Applicable 0.41 1.24 Not Applicable 0.41 1.24 Not Applicable 0.41 1.24 Not Applicable 0.41 1.63 0.394 0.748 0.394 1.220 0.394 1.220 0.394 1.614 0.394 0.748 0.394 1.220 0.394 1.220 0.394 1.614 1.654 2.047 1.654 2.520 1.654 2.520 1.654 2.874 Not Recommended 1.634 2.461 1.988 2.815 2.500 3.287 1.634 2.461 1.988 2.815 2.500 3.287 1.634 2.894 1.988 3.209 2.500 3.681 1.220 1.575 1.220 1.969 1.220 1.969 1.220 2.362 1.614 1.969 1.614 2.402 1.614 2.402 1.614 2.795 2.2 3 2.2 3 2.2 3 2.2 3.43 Not Recommended 1.831 2.657 1.831 2.657 1.831 3.051 Not Recommended 1.575 2.362 1.575 2.362 1.575 2.835 Not Recommended 3.071 3.898 3.071 3.898 3.071 4.291 Not Recommended Not Recommended 4.213 5.039 4.213 5.433 Not Recommended Not Recommended 3.031 3.858 3.031 4.252 Not Recommended Not Recommended Not Recommended 4.213 5.472 Cole Jaw Mini Cole Jaw Suitable Chuck Precision Midi* Nova G3 SuperNova2 Titan Precision Midi* Nova G3 SuperNova2 Titan Expanding Action Specifications Max 8.661 9.291 9.291 9.449 6.181 6.693 6.693 7.087 Please note, Tolerance of +/-1mm on all measurements NOVA Universal Spa Spanner * Measurements with stop-screw • Features atures over 4 diff different NOVA specific functions ctions iin one handy tool ** Recommended with Caution Full Cross Function Only NOVA Chucks give you the same jaw fixing system and same insert/ adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range, including older chuck models*, giving you the ultimate flexibility. In buying a NOVA chuck, you can be confident that whether you want to move up or down the range, any accessories you have invested in will fit. 6021 10051 NOVA Soft Jaw Set 10 in 1 Chuck Gauge • Able to be cut and custom moulded by the user to their specific holding requirements • Markless holding – the nylon material holds most woods without marking • Handy gauge enables you to work out your NOVA dovetails easily with many of the useful measuring and gauging functions used in the Woodworking workshop JS25N 6008 25mm (1”) Jaw Set NOVA Dovetail Chisel • Ensures a dovetail with a sharp, clean edge to match up exactly to the dovetail contour of the NOVA Accessory Jaws JS20N Mini 20mm Jaws • For work that is below the 25mm jaws • One of our most popular and convenient jaws for small bowl and small unsupported spigot turning work. Ideal for mini/midi lathe work. JSPIN Pin Jaw Set (1”) • These extended jaws are designed to act like a pin chuck – expanding into a pre-bored hole 6019 JS5ON 35mm (1.35”) Bowl Jaws 50mm (2”) Jaw Set • The 35mm bowl jaws fit perfectly into the current jaw range, picking up a small gap left between the 25mm and the 50mm • These jaws are standard with all Teknatool chuck standard versions (excluding Nova Titan, which has the Powergrip Jaw as standard) Special Dovetail Profile NOVA chucks have been especially designed so the jaws will cut into the wood, grip firmly in the contraction mode and provide high tear out strength. Some chucks use an engineering jaw profile (designed to hold a hard material like steel) or rounded profiles, which just crush the wood fibres without digging in and holding securely. JS-SP35 6017 6014 75mm (3”) Long Nosed Jaws 75mm (3”) Bowl Jaws • The dovetail walls are 3 x the thickness of conventional jaw types for rugged work holding for larger/heavier bowl work JS70N 70mm Jaws • Bowl and spigot projects • A 50mm 2” rise above their mounting base means very long reach deep inside of bowls Spigot Jaw 35mm (1.375”) JS75DT 6025 Mini Step Jaws • Gripping bowls in expansion mode • 3 step sizes provide optimum gripping • Minimal crush damage to wood Step Jaw Set 6026 • Great for gripping the base (foot) of footed bowls in the contracting mode. • Optimum Step sizes: 42mm (1.65”) 50mm (2”) 64mm (2.5”) • Powerful and rigid grip for small spigot turning • Small bowl work Mini Spigot Jaws • Specially designed to provide a strong contracting grip to unsupported spigot turning applications, e.g vases, goblets. Can handle spigots up to 50mm (2”) and minimum down to 30mm (13/36”) JS-SP45 Spigot Jaw 45mm (1.8”) • Same style as 35 spigot, these jaws provide a strong contracting grip to unsupported spigot turning applications Special Jaw Slides • All NOVA Chucks use the same fixing method, meaning appropriate* accessory jaws can be fitted across the range to any NOVA Chuck. • The jaw slides have automatic jaw stop safety feature - automatically prevents the jaw slides coming out from the chuck body. • Precision fit, designed for a long, tough life. • Large section guideways and large surface area for long term surface and wear resistance. • Teeth have radiused edge profiles to reduce wear and frictional resistance on scroll ring. • Made from iron composite impregnated with copper – copper has outstanding qualities as an anti-seize and low friction agent. The copper is fused into the matrix for finest mechanical properties. *Not all accessory jaws are recommended for use on every chuck in the range, for example large accessory jaws designed for big work are not recommended for use on the small Precision Midi Chuck. Check comprehensive accessory jaw manual or pamphlet if in doubt, or ask your reseller. Copyright © 2011 Teknatool® International. All rights reserved. Teknatool® USA, Inc. Due to NOVAs continual product development and improvement policy, product features and specifications may change without notice. 10539_Jaw Poster A2_FA2.indd 1 23079 3079 All measurements in mm Smart Tools, Powerful Solutions Jaw Set & Chuck Suitability 6000 6001 6002 JSCOLE Cole Jaw Set JS100N JS130N 100mm (4”) Jaw Set 130mm (5”) Jumbo Jaw Set PJSN • The big brother to the 100mm jaw set • Designed to handle large work up to 750mm in diameter • The most powerful jaw available for large spigot/hollow form turning on the SuperNova2 • Designed for expanded dovetail, reverse dovetail for gripping footed bowls • One of our most popular jaws to mount 12”-14” bowls Powergrip Jaw Set • A versatile set designed for re-chucking of bowls to remove chuck marks • Standard Cole Jaws are suitable for lathes with minimum 12”/300mm swing diameter 6006 Faceplate Rings Mini Cole Jaw Set • Three Sizes: - 50mm (2”)(fits standard 50mm jaws), Faceplate diameter (3”) - 100mm (4”)(fits 100mm jaws), Faceplate diameter (5”) - 130mm (5”)(fits 130mm jaws), Faceplate diameter 6.25” • A versatile set designed for rechucking of bowls to remove chuck marks • Suitable for mini and midi lathes with a minimum 8” diameter swing NOVA: Smart Tools, Powerful Solutions NCSC Chuck Spur Centre • Never take the chuck off your lathe • Allows you to quick mount a spur center on your chuck. For the bowl turner who also does some spindle work 10006 Woodworm Screw • Standard with most chucks (check with your reseller or on our website) www.teknatool.com 30/04/12 3:59 PM