FADMA Country Report

FADMA COUNTRY
REPORTS
Venue : Bangalore International Exhibition Centre (BIEC)
Bangalore, Karnataka, India
Date : 6th to 9th April, 2016
INDIA-2016
FADMA Report _____________________________________________________________________
Federation of Asian Die and Mould Associations
(FADMA) is a regional grouping of die and mould
manufacturers and precision engineering associations
and TAGMA India is one of the 10 members of
FADMA. The other members are from Japan, China,
Taiwan, Korea, Thailand, Singapore, Malaysia,
Philippines and Indonesia.
This time FADMA convention was held on June 24th
2015 at Bangkok hosted by Thailand Die and Mould
association. Mr. D. Ravi, EC Member represented
from TAGMAIndia for FADMAconvention.
The country repot presented by TAGMA India is being
reproduced in this issue. We will print reports of all
countries in the subsequent issues of the newsletter for
the benefit of our members.
Tool and Gauge
Manufacturers
Association-India
• Started in 1990 | 525 Members
• Registered office in Bangalore, Secretariat in
Mumbai, Chapter offices at Pune and Coimbatore
• Organizes DIEMOULD INDIA International
Exhibition, the most popular mould and die show in
India, conducted biannually since 1998.
• Liaison with Govt. of India on Industry issues like
Common Facility Centres covering Skills, Testing,
Technology gaps to enhance competitivesness
• Online library and CBT modules to Enhance
Knowledge and Technology in Toolmaking.
TAGMA TIMES NEWS LETTER • JULY-2015
• Promote and encourage improvements for
competitive growth through Exhibitions, delegations,
workshops, seminars conference.
• Periodically conducts survey/ study of the Indian
Toolrooms Industry and document the research
findings to keep track of the developments which is
widely shared in enhancing the contribution of this
sector to the growth of the Indian economy.
New Initiative
To establish a series of “TAGMA Centre for Growth and
Excellence” for tooling development/ trials and skills
training for the benefit of the tooling and
manufacturing industry in general – to start with Pilot
Project at Chakan, Pune an Automobile hub in
Maharashtra.
The Project will be developed on a cluster model and a
37
Venue : Bangalore International Exhibition Centre (BIEC)
Bangalore, Karnataka, India
Date : 6th to 9th April, 2016
INDIA-2016
separate Special Purpose Vehicle (SPV) - TAGMA
Centre of Excellence and Training (TCET) is
incorporated for implementation and management of
the Centre
The Project is funded by Department of Heavy
Industry (DHI) under “Scheme for Enhancement of
Competitiveness of Capital Goods Sector” upto 80%
of the cost of equipment.
Indian Economy
• Growth picked up in 2014, inflation markedly
declined, and the external position was comfortable,
helped by positive policies and lower global oil prices.
• The outlook for India is for economic strengthening
through higher infrastructure spending, increased
fiscal devolution to states, and continued reform to
financial and monetary policy.
FADMA COUNTRY
REPORTS
sectors' share in GDP to 25 per cent within a decade by
facilitating the growth of the manufacturing sector in
India Under the policy GoI to set up National
Investment and Manufacturing Zones (NIMZ) 5000
hectares in size and single window clearance system,
leveraging incentive schemes and Technology
acquisitions and development fund.
Indian Tooling Industry Overview 2013-14
Demand Trend in Indian Tool Room Industry
• The estimated turnover of the Indian Tool Room
industry in FY 2013-14 was INR 141,750 Million. The
sector has witnessed a marginal growth of 4% against
the turnover of INR 136,000 Million during FY 2012-13.
• The demand for Tooling during FY 2013-14 is mainly
supported by positive growth in user sectors like two
wheeler, tractors, packaging, Plastic and increased
investment in developing new products across all user
• After growing by 4.5% in FY 2013, industry
accelerated to 5.9% in FY 2014, helped by a 6.8%
growth in manufacturing.
• The government's initial estimates for Fiscal Year
2014 (ending March 2015) show that economic
growth accelerated to 7.4%. Agriculture growth
slipped to 1.1% in FY2014 largely because the
monsoon was erratic, particularly affecting the
summer crop. The production of food grains
contracted by 3.2% from FY 2013
• Monthly industrial production estimates indicate a
modest upturn. The production of capital goods
expanded after 3 years in the red.
segment.
• With the increasing usage of plastics in automobiles,
• Consumer durables continued to decline
• Improved coal production helped double the growth
of electricity generation over the previous year's rate.
• National Manufacturing Policy has been launched
by the government with an aim of enhancing the
38
TAGMA TIMES NEWS LETTER • JULY-2015
FADMA COUNTRY
REPORTS
Venue : Bangalore International Exhibition Centre (BIEC)
Bangalore, Karnataka, India
Date : 6th to 9th April, 2016
consumer durables and electrical & electronics the
demand for plastic has increased manifold. The
industry grew by 13 per cent annually in last five years
and expect to continue double-digit growth beyond
2016-17
Trade Promotion Event In The Country
10th Diemould India 2016 International Exhibition
• The 10th biennial Die & Mould India International
Exhibition will be held from April 6-9, 2016 at
Bangalore International Exhibition Centre (BIEC),
Bangalore, Karnataka, India
• Complimentary booth for FADMA and Member
Countries at DMI 2016
• Special price to all FADMA Member Countries for
TAGMA TIMES NEWS LETTER • JULY-2015
INDIA-2016
organising Country Pavilion on signing of MOU.
• Also invites special delegation from member
countries
Exhibit Range:
• Additive Manufacturing/ 3D Printing
• CAD/CAM system related to Dies & Moulds
• CNC Milling/ Machining Centre, EDM, etc.
• Coating ? Cutting Tools ? Digitizing
• Die/mould polishing/ Die spotting machines
• Dies & Moulds, Press Tools, Jigs, Fixtures, Gauges
• Heat Treatment Hot Runner System
• Machine Tools & Accessories for Dies & Moulds
• Measuring Machines, Quality Assurance
• Mould base & standard parts of Dies & Moulds,
Toolings
• Moulding Machines/ Die Casting Machines, Sheet
Metal Presses & Ancillaries
• Rapid Prototyping & Tooling
• Surface Treatment • Texturizing • Tool Steel
• All Ancillary materials, equipments, accessories,
consumables, services & automation covering Die &
Mould industry
Space Rental:
Promotion:
39