Industrial Brochure - justSay

Call us today for details!
Distributed by:
T42
the TRUSTED WIRELESS™
replacement for old
fixed-frequency or
pendant control systems.
www.omnexcontrols.com
Since 1986, OMNEX Control Systems ULC has been designing and manufacturing the most secure, reliable and robust
radio remote control and fixed industrial wireless solutions in
the industry.
• 20 years of experience
• 20 years of wireless industrial ON/OFF machine control
• 17 years of industrial proportional machine control
• 16 years of TRUSTED WIRELESS™ FHSS radio technology
• 15 years of TRUSTED WIRELESS™ industrial I/O
• 12 years of Tier 1 industrial mobile machine OEM's
• 7 years of Tier 1 industrial TRUSTED WIRELESS™
technology partnerships
Delivering Armored Technology
It’s easy to design a radio that works. It’s difficult to design a radio
that doesn’t fail. OMNEX industrial strength radios are designed
to not fail. That’s why hundreds of thousands of users rely on OMNEX
industrially hardened, TRUSTED WIRELESS™ and standardsbased technologies for safety, system-critical control, innovative
functionality, cost-effective operation, and day-to-day machine
and instrument reliability. Regardless of the job and location, you
want your radios to work—all the time!
The OMNEX TRUSTED WIRELESS™ T42/R42 system uses
Frequency Hopping Spread Spectrum (FHSS) technology.
Truck mounted receiver.
FHSS devices concentrate their full power into a very narrow
signal that randomly hops from frequency to frequency
within a license-free band. This transmission pattern, along
with CRC-16 error checking techniques, enables our
industrially hardened FHSS signals to overcome interference that commonly affects licensed radios.
Use our radios in downtown locations, near airports and
other high interference places and you will find that our
radios work smoothly, precisely and ensure interference
free fail-safe operation.
The OMNEX TRUSTED WIRELESS™ T42/R42 is a long range, programmable radio mobile control system. Compact and easy-to
-use, this member of the TRUSTED WIRELESS™ family puts complete
control of your Concrete Boom Truck where it’s needed most, with
the operator. It’s robust, easy to install and is plug’n play. Remove your old fixed-frequency remote control system, plug in
the OMNEX R42 receiver and you are ready to go. Transmitter
spares can be swapped in the field without the need to ship the
system back to the manufacturer. The receiver stores all of the
calibration/teach parameters. All you need to do is link the receiver
to the new transmitter and you are ready to go!
KEY BENEFITS
• Interference Free Radio
• Extended range
• Extended battery life
• Standard Makita 9.6V battery– non proprietary
• Plug'n play
• Calibrate/Teach on the fly capability with
minimum/maximum indication
• Joystick control selection for World Standard,
The T42 transmitter comes with 38 standard functions plus E-Stop
and is customizable to provide more functions. The T42 is designed
and programmed with the major joystick control configurations.
A program Selector switch allows the operator to select World
Standard, Old ACPA, or Old PM joystick configurations without the need to ship the system back to the factory. Using the transmitter’s Teach mode, the operator has the ability to calibrate the
boom’s proportional valves during operation. So if a joystick is not
giving you the performance you require, calibrate on the job; as
you’re working. A unique ID code is used by each T42 to ensure
that no two systems will conflict on a job site.
Old ACPA, and Old PM configurations
• 3 – 5 section controls
• Wireless and Pendant in one
• Impact resistant
• Full diagnostics, both transmitter and receiver
• Low maintenance
SAFE
ACCURATE The R42 receiver can be powered from a 12VDC or 24VDC system.
This TRUSTED WIRELESS™ system features 19 solid state, high-side
driver input/output controls, 2-way capability and a reliable E-Stop
control. Up to fourteen current-control, PWM, or voltage outputs, or
a combination of these can be added.
Tether/Pendant
RF Connection
Plug'n Play
Isolated Ground Protection
Operator Keys Standard 38 functions + E-Stop, customizable
to provide more functions
E-Stop Switch conforms to EN 609 47-5-1, monitored
for integrity
Indicators & Diagnostics Battery/Pendant, Active LED & E-Stop LED status indicators
Security Factory programmed-unique ID code. CRC-16 error detection
Input Power Makita 9.6V DC Rechargeable NiCad Battery
Battery Life 60 hours (continuous use)
Operating Temp. Range -40° F to 158° F (-40° C to 70° C)
Size 11.0" x 9.0" x 6.75" (279mm x 229mm x 171mm)
Weight 6.0 lbs (including battery) (2.7 kg)
Construction High impact, low temperature plastic, weatherproof
UL 94, 746A, C, D, IEC 60695-2-20
Frequency 2.4 - 2.483GHz — ISM band
Antenna Transmitter – Internal, Receiver - External
Accessories 4-point harness, pendant cable, waist belt,
DC Charger
Approvals/Certificates USA — FCC Part 15.247
Canada — ISC RSS 210
European Union — CE (#3059)
Australia — C-Tick
RF Approval EN 300 - 440
HV Proximity Tested to 350kV
Works with the following R2160 19 I/O, 2-way communication
Receivers R170 CANbus (J1939)
Expansion Modules D180 14 proportional outputs
Specifications subject to change without notice
RELIABLE
CUSTOMIZABLE
GLOBAL & LICENSE Free
INTERFERENCE Free (FHSS)
MAINTENANCE Free