300-HW series - Alto

ITEM NO.
_______________________
300-HW
series
HOT FOOD HOLDING DROP-IN WELL
• The gentle heating capability of Halo Heat
significantly extends hot food holding life without
continuing the cooking process.
300-HWI/D6
• Provides a more appealing product with better
appearance and fresher taste.
• Front-of-the-house use with an existing counter, overhead
heating, and sneeze guard system or drop into a prep
table for hot food plating convenience.
• Easy drop-in installation without the need of water or
drainage connections and the related installation and
water usage costs.
300-HW/D443
• Maintenance savings with the elimination of lime and
scale buildup associated with steam table holding.
• Increase employee safety with the elimination of burning
steam when changing pans.
300-HWLF
IP X3
• Adjustable thermostat with remote control suitable
for mounting provides holding temperature flexibility
without high steam table temperatures to scorch or burn.
• Stainless steel interior walls are easy to clean with coved
corners on two sides of the well.
• HWI series with individual wells and independent
controls expands your menu options.
Short Form Spec
The Alto-Shaam 300-HW is a hot food holding well with a stainless steel exterior. The hot well includes stainless steel interior walls with coved corners
on two sides. HW and HWLF models are controlled by a single adjustable thermostat with a range of 1 through 10 and includes an indicator light.
HWI and HWILF models are controlled by three (3) adjustable thermostats with a range of 1 through 10, each with an indicator light. The thermostat
control is attached to the hot well base by a 72" (1892mm) flexible and water tight conduit.
The hot well base is available in two depths. The 4‑3/8" (111mm) deep hot well holds 4" (100mm) deep pans and the 6‑3/8" (162mm) deep hot well
holds 150mm deep pans. Both hot wells will hold a combination of standard (gastronorm) pan sizes. The HW and HWLF D4 and D6 hot wells include
six (6) half/third-size pan divider bars and two (2) full-size pan divider bars. The HW/D443 and HW/D643 hot wells include nine (9) half/third-size
divider bars and two (2) large divider bars. The HWI and HWILF hot wells include six (6) half/third-size divider bars. The HWI/D443 and HWI/
D643 hot wells include nine (9) half/third-size divider bars.
MODEL 300-HW/D4: 111mm depth, accepts three (3) Full-size (gastronorm) pans
MODEL 300-HW/D6: 162 mm depth, accepts three (3) Full-size (gastronorm) pans
MODEL 300-HWLF/D4: 111mm depth, accepts three (3) Full-size (gastronorm) pans
MODEL 300-HWLF/D6: 162 mm depth, accepts three (3) Full-size (gastronorm) pans
MODEL 300-HW/D443: 111mm depth, accepts three (3) Full-size (gastronorm) pans and three (3) third-size (gastronorm) pans
MODEL 300-HW/D643: 162 mm depth, accepts three (3) Full-size (gastronorm) pans and three (3) third-size (gastronorm) pans
MODEL 300-HWI/D4: 111mm depth, accepts three (3) Full-size (gastronorm) pans
MODEL 300-HWI/D6: 162 mm depth, accepts three (3) Full-size (gastronorm) pans
MODEL 300-HWILF/D4: 111mm depth, accepts three (3) Full-size (gastronorm) pans
MODEL 300-HWILF/D6: 162 mm depth, accepts three (3) Full-size (gastronorm) pans
MODEL 300-HWI/D443: 111mm depth, accepts three (3) Full-size (gastronorm) pans and three (3) third-size (gastronorm) pans
MODEL 300-HWI/D643: 162 mm depth, accepts three (3) Full-size (gastronorm) pans and three (3) third-size (gastronorm) pans
Factory-installed Options
• Voltage Choices:
120V
208-240V
230V
• Control Box Cord Location:
Back, Standard
Bottom, Option
W164 n9221 Water street • p.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.s.a.
PHONE :
262.251.3800 800.558.8744 U . S . A ./ CANADA
FAX :
262.251.7067 800.329.8744 U . S . A .
ONLY
www.alto-shaam.com
PRINTED IN U.S.A.
DUE TO ONGOING PRODUCT IMPROVEMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
#08c - 06/16
INSTALLATION REQUIREMENTS
- Appliance must be installed level and must not be installed in any area
where it may be directly affected by steam, grease, dripping water, high
temperatures, or any other severely adverse conditions.
- To maintain proper food temperature, overhead heating is required.
- Countertop material must withstand temperatures up to 200°F (93°C).
- A stainless steel heat shield is recommended if the area under the
appliance is used for storage.
300-HW PRODUCT\PAN CAPACITY*
D4: 72 lb (33 kg) / D443: 96 lbs (43.5 kg) MAX.
D4: 43.5 qt (42 L) / D443: 56.6 qt (53.3 L)
FULL-SIZE PANS:
Three (3) 12" x 20" x 4"
GN 1/1 (325mm x 530mm x 100mm)
HALF-SIZE PANS:
Six (6) 12" x 10" x 4"
GN 1/2 (325mm x 265mm x 100mm)
THIRD-SIZE PANS:
D4: Nine (9) / D443: Twelve (12) 12" x 6" x 4"
GN 1/3 (325mm x 176mm x 100mm)
MAX. VOLUME:
CLEARANCE REQUIREMENTS
1" (25mm) from combustible surfaces
OPTIONS & ACCESSORIES
Pan Divider Bar — HALF-SIZE/THIRD-SIZE . . . . . . . . . . . . . . . . . . . . . . 11318
Pan Divider Bar — FULL-SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16019
Pan Divider Bar — D443/D643 SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . 1012405
Locking Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5020849
*Based on 4" (100mm) deep pans. Will also accept 2-1/2" (65mm) deep pans;
D6 hot wells will accept 6" (150mm) deep pans.
300-HW
series
9/16" (14mm)
FLANGE
9/16" (14mm)
11" (278mm)
FLANGE
39-5/8" (1007mm)
300-HWLF
5-9/16" (140 mm)
37-7/8" (962 mm)
4-3/8" (111mm)
1-7/8" (46mm)
44-1/4" (1123mm)
39-11/16" (1007mm)
6" (152mm)
1/4" (6mm)
6-7/16 " (163 mm)
4-15/16" (125mm)
5" (127 mm)
6-15/16 " (175 mm)
4" (102mm)
5"
(126mm)
Conduit when
exiting back
6-15/16" (175 mm)
4-15/16" (125mm)
Ø 3/16" (5mm)
6"
(152mm)
6" (152mm)
5"
(126mm)
2-1/2" (63mm)
Optional stainless steel heat shield
(not factory supplied)
11" (278mm)
300-HWLF/D4
FLANGE
WELL
22-1/16" (559mm)
FLANGE
FLANGE
2-1/2" (63mm)
WELL
20-3/16" (512mm)
3-7/16" (87mm)
2-5/16" (59mm)
2-5/16" (59mm)
20-3/16" (512mm)
WELL
WELL
series
HOT FOOD HOLDING DROP-IN WELL
7-5/16" (185mm)
3-3/16" (81 mm)
Conduit when
exiting bottom
Optional stainless steel heat shield
(not factory supplied)
4-1/8" (104mm)
2-1/2" (63mm)
6-7/16"
(163mm)
6-15/16"
(175mm)
4-15/16" (125mm)
6" (152mm)
Ø 3/16" (5mm)
4-15/16" (125mm)
6-15/16" (175mm)
6-15/16" (175mm)
27-1/16" (686mm)
Conduit when
exiting back
5" (127mm)
5" (127mm)
1/4" (6mm)
6"
(152mm)
6" (152mm)
FLANGE
5"
(126mm)
11/16" (17mm)
11/16" (17mm)
5"
(126mm)
4" (102mm)
FLANGE
5"
(126mm)
WELL
22-1/16" (559mm)
WELL
300-HW/D4
300-HW/D443
1-7/8" (46mm)
4-3/8" (111mm)
20-3/16" (512mm)
1-1/2" (38mm)
23-1/8" (586mm)
WELL
27-1/4" (691mm)
29-1/16" (738mm)
1-1/2" (38mm)
WELL
27-1/4" (691mm)
30-3/16" (765mm)
5-9/16" (140mm)
37-7/8" (962mm)
1-9/16" (39mm)
WELL
WELL
WELL
7-5/16" (185mm)
40-15/16" (1039mm)
20-3/16" (512mm)
4-3/8" (111mm)
37-7/8" (962mm)
1-9/16" (39mm)
1-7/8" (46mm)
5-9/16" (140mm)
4-1/8" (104mm)
7-5/16" (185mm)
40-15/16" (1039mm)
Conduit when
exiting bottom
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE :
262.251.3800 800.558.8744 U . S . A ./ CANADA
FAX :
262.251.7067 800.329.8744 U . S . A .
ONLY
www.alto-shaam.com
#08c - 06/16
4-1/8" (104mm)
HOT FOOD HOLDING DROP-IN WELL
DUE TO ONGOING PRODUCT IMPROVEMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRINTED IN U.S.A.
300-HWI
series
HOT FOOD HOLDING DROP-IN WELL
5-9/16" (141mm)
FLANGE
4-1/8" (104mm)
WELL
20-3/16" (512mm)
22-1/16" (559mm)
5/8" (16mm)
39-11/16" (1007mm)
6" (152mm)
FLANGE
5/8" (15mm)
WELL
1-1/2" (38mm)
WELL
WELL
20-3/16" (512mm)
23-3/16" (588mm)
4-3/8" (111mm)
12" (304mm)
1-7/16" (36mm)
1-7/8" (46mm)
7-5/16" (185mm)
40-7/8" (1038mm)
Optional stainless steel heat shield
(not factory supplied)
Ø 3/16" (5mm)
1/4" (6mm)
13-7/16" (340mm)
13-15/16" (353mm)
12" (305mm)
WELL
Conduit when
exiting back
4-15/16" (125mm)
4-1/8" (104mm)
WELL
27-1/4" (691mm)
6"
(152mm)
Conduit when
exiting bottom
FLANGE
5/8" (15mm)
WELL
27-1/4" (691mm)
29-1/16" (738mm)
1-1/2" (38mm)
30-1/4" (767mm)
11" (278mm)
5"
(126mm)
6" (152mm)
4-3/8" (111mm)
WELL
4" (102mm)
5-9/16" (141mm)
12" (304mm)
1-7/16" (36mm)
7-5/16" (185mm)
1-7/8" (46mm)
13-15/16" (353mm)
40-7/8" (1038mm)
2-1/2" (63mm)
5"
(126mm)
4-15/16" (125mm)
300-HWI/D4
300-HWI/D443
300-HWILF
12" (305mm)
13-15/16" (353mm)
series
5-9/16" (141mm)
4-3/8" (111mm)
WELL
12" (305mm)
WELL
2-5/16" (59mm)
FLANGE
39-11/16" (1007mm)
4-1/8" (104mm)
WELL
20-3/16" (512mm)
22-1/16" (559mm)
WELL
20-3/16" (512mm)
6" (152mm)
6"
(152mm)
4" (102mm)
11" (278mm)
5"
(126mm)
Conduit when
exiting back
Ø 3/16" (5mm)
1/4" (6mm)
6" (152mm)
5"
(126mm)
300-HWILF/D4
4-15/16" (125mm)
12" (305mm)
13-15/16" (353mm)
13-7/16" (340mm)
13-15/16" (353mm)
2-1/2" (63mm)
Optional stainless steel heat shield
(not factory supplied)
4-15/16" (125mm)
27-1/16" (686mm)
FLANGE
3-1/8" (79mm)
1-7/8" (46mm)
7-5/16" (185mm)
44-1/4" (1124mm)
2-1/2" (63mm)
3-7/16" (87mm)
HOT FOOD HOLDING DROP-IN WELL
Conduit when
exiting bottom
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE :
262.251.3800 800.558.8744 U . S . A ./ CANADA
FAX :
262.251.7067 800.329.8744 U . S . A .
ONLY
www.alto-shaam.com
PRINTED IN U.S.A.
DUE TO ONGOING PRODUCT IMPROVEMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
#08c - 06/16
ELECTRICAL:
300-HW/D4 & /D6,
300-HWLF/D4 & /D6,
300-HWI/D4 & /D6,
300-HWILF/D4 & /D6
300-HW/D443 & /D643,
300-HWI/D443 & /D643
Cord Length:
VOLTAGE
PHASE
CYCLE/HZ
AMPS
kW
120
1
50/60
15.0
1.8
208 – 240
1
50/60
6.5 – 7.5
1.4 – 1.8
230
1
50/60
7.8
1.8
120
1
50/60
20.3
2.4
208 – 240
1
50/60
8.8 – 10.1
1.8 – 2.4
230
1
50/60
10.6
2.4
120V - 6 ft. (1.8m)
208-240V - 9 ft. (2.7m)
230V (CEE) - 9 ft. (2.7m)
PLUG CONFIGURATION
CEE
NEMA 5-20P
20A - 125V PLUG
NEMA 6-15P
15A - 250V PLUG
CH2-16P
PLUG RATED 250V
NEMA L5-30P
30A - 125V PLUG
NEMA 6-15P
15A - 250V PLUG
CH2-16P
PLUG RATED 250V
7/7
250V
PLUG RATED
CEE
7/7
250V
PLUG RATED
BS1363
PLUG RATED
250V
BS1363
PLUG RATED
250V
230V (CH, BS) - 8 ft. (2.5m)
DIMENSIONS:
OVERALL EXTERIOR
WELL INTERIOR
COUNTER CUTOUT
CONTROL BOX CUTOUT*
height
width
depth
height
width
depth
width
depth
height
width
depth
300-HW/D4
7-5/16"
(185mm)
40-15/16"
(1039mm)
23-1/8"
(586mm)
4-3/8"
(111mm)
37-7/8"
(962mm)
20-3/16"
(512mm)
40"
(1016mm)
22-1/2"
(572mm)
4-1/4"
(108mm)
5-1/4"
(133mm)
10-13/16"
(274mm)
300-HW/D6
9-1/4"
(234mm)
40-15/16"
(1039mm)
23-1/8"
(586mm)
6-3/8"
(162mm)
37-7/8"
(962mm)
20-3/16"
(512mm)
40"
(1016mm)
22-1/2"
(572mm)
4-1/4"
(108mm)
5-1/4"
(133mm)
10-13/16"
(274mm)
300-HW/D443
7-5/16"
(185mm)
40-15/16"
(1039mm)
30-3/16"
(765mm)
4-3/8"
(111mm)
37-7/8"
(962mm)
27-1/4"
(691mm)
40"
(1016mm)
29-1/2"
(749mm)
4-1/4"
(108mm)
5-1/4"
(133mm)
10-13/16"
(274mm)
300-HW/D643
9-3/16"
(233mm)
40-15/16"
(1039mm)
30-3/16"
(765mm)
6-3/8"
(162mm)
37-7/8"
(962mm)
27-1/4"
(691mm)
40"
(1016mm)
29-1/2"
(749mm)
4-1/4"
(108mm)
5-1/4"
(133mm)
10-13/16"
(274mm)
300-HWLF/D4
7-5/16"
(185mm)
44-1/4"
(1123mm)
27-1/16"
(686mm)
4-3/8"
(111mm)
37-7/8"
(962mm)
20-3/16"
(512mm)
40"
(1016mm)
22-1/2"
(572mm)
4-1/4"
(108mm)
5-1/4"
(133mm)
10-13/16"
(274mm)
300-HWLF/D6
9-1/8"
(232mm)
44-1/4"
(1123mm)
27-1/16"
(686mm)
6-3/8"
(162mm)
37-7/8"
(962mm)
20-3/16"
(512mm)
40"
(1016mm)
22-1/2"
(572mm)
4-1/4"
(108mm)
5-1/4"
(133mm)
10-13/16"
(274mm)
300-HWI/D4
7-5/16"
(185mm)
40-7/8"
(1038mm)
23-3/16"
(588mm)
4-3/8"
(111mm)
12"
(304mm)
20-3/16"
(512mm)
40"
(1016mm)
22-1/2"
(572mm)
4-1/4"
(108mm)
12-1/4"
(311mm)
10-13/16"
(274mm)
300-HWI/D6
9-1/4"
(234mm)
40-7/8"
(1038mm)
23-3/16"
(588mm)
6-3/8"
(162mm)
12"
(304mm)
20-3/16"
(512mm)
40"
(1016mm)
22-1/2"
(572mm)
4-1/4"
(108mm)
12-1/4"
(311mm)
10-13/16"
(274mm)
300-HWI/D443
7-5/16"
(185mm)
40-7/8"
(1038mm)
30-1/4"
(767mm)
4-3/8"
(111mm)
12"
(304mm)
27-1/4"
(691mm)
40"
(1016mm)
29-1/2"
(749mm)
4-1/4"
(108mm)
12-1/4"
(311mm)
10-13/16"
(274mm)
300-HWI/D643
9-1/4"
(234mm)
40-7/8"
(1038mm)
30-1/4"
(767mm)
6-3/8"
(162mm)
12"
(304mm)
27-1/4"
(691mm)
40"
(1016mm)
29-1/2"
(749mm)
4-1/4"
(108mm)
12-1/4"
(311mm)
10-13/16"
(274mm)
300-HWILF/D4
7-5/16"
(185mm)
44-1/4"
(1124mm)
27-1/16"
(686mm)
4-3/8"
(111mm)
12"
(304mm)
20-3/16"
(512mm)
40"
(1016mm)
22-1/2"
(572mm)
4-1/4"
(108mm)
12-1/4"
(311mm)
10-13/16"
(274mm)
300-HWILF/D6
9-1/4"
(234mm)
44-1/4"
(1124mm)
27-1/16"
(686mm)
6-3/8"
(162mm)
12"
(304mm)
20-3/16"
(512mm)
40"
(1016mm)
22-1/2"
(572mm)
4-1/4"
(108mm)
12-1/4"
(311mm)
10-13/16"
(274mm)
*Allow 6" (152mm) clearance from control box to conduit bend
WEIGHT:
est.
net weight
ship weight*
crate dimensions* l x w x h
300-HW/D4
54.5 lb (25 kg)
128 lb (58 kg)
49" x 34" x 15" (1245mm x 864mm x 381mm)
300-HW/D6
61 lb (28 kg)
160 lb (73 kg)
49" x 34" x 15" (1245mm x 864mm x 381mm)
300-HW/D443
68 lb (31 kg)
128 lb (58 kg)
49" x 34" x 15" (1245mm x 864mm x 381mm)
300-HW/D643
75 lb (34 kg)
160 lb (73 kg)
49" x 34" x 15" (1245mm x 864mm x 381mm)
300-HWLF/D4
58 lb (26 kg)
contact factory
contact factory
300-HWLF/D6
64.5 lb (29 kg)
110 lb (50 kg)
49" x 34" x 15" (1245mm x 864mm x 381mm)
300-HWI/D4
69 lb (31 kg)
117 lb (53 kg)
49" x 34" x 15" (1245mm x 864mm x 381mm)
300-HWI/D6
77.5 lb (35 kg)
125 lb (57 kg)
49" x 34" x 15" (1245mm x 864mm x 381mm)
300-HWI/D443
85 lb (39 kg)
contact factory
contact factory
300-HWI/D643
99 lb (45 kg)
contact factory
contact factory
300-HWILF/D4
74 lb (34 kg)
135 lb (61 kg)
49" x 34" x 15" (1245mm x 864mm x 381mm)
300-HWILF/D6
83 lb (38 kg)
125 lb (57 kg)
49" x 34" x 15" (1245mm x 864mm x 381mm)
*Domestic ground shipping information. Contact factory for export weight and dimensions.
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE :
262.251.3800 800.558.8744 U . S . A ./ CANADA
FAX :
262.251.7067 800.329.8744 U . S . A .
ONLY
www.alto-shaam.com
#08c - 06/16
DUE TO ONGOING PRODUCT IMPROVEMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRINTED IN U.S.A.