ZC-DW8000 SERIES

INDOOR COLOR CAMERA
Lens Specification
Focal Length
D/N
Digital
Models (Standard DC12/AC24V Dual-Voltage)
Aperture
View Angle
1:1.2~2.1
3~9mm
90~31.8
True
1:1.4~2.4
1:1.4~2.9
Digital
2.5~6mm
True
Digital
9-22mm
True
Digital
5-50mm
Type
Standard
IR
Input Power
DC12V
AC24V
DC12V
AC24V
Voltage
DC 12V±10%
AC 24V±10%
DC 12V±10%
AC 24V±10%
Current
300mA±10%
300mA±10%
550mA±10%
500mA±10%
⑨
(IR Model)
(Standard Model)
1. Top Cover
2. Bottom Cover
3. Video Output Connector
4. Power Input Jack
5. LED Cover (For IR Model)
6. Focus and View Angle Adjust Lever
7. Service Monitor Jack
8. Multi Tact Switch for OSD
9. Slide Switch for Sync. system
True
111.6~47.3
1:1.4~1.6
23.1~13.1
1:1.8~1.8
51.5~6.5
ZC-DW8039PXA-IR
ZC-DWN8039PXA
ZC-DWN8039PXA-IR
ZC-DW8312NXA
ZC-DW8312PXA
ZC-DW8312NXA-IR
ZC-DW8312PXA-IR
ZC-DWN8312NXA
ZC-DWN8312PXA
ZC-DWN8039NXA-IR
ZC-DWN8312PXA-IR
ZC-DW8256NXA
ZC-DW8256PXA
ZC-DWN8256NXA
ZC-DWN8256PXA
ZC-DW8922NXA
ZC-DW8922PXA
ZC-DWN8922NXA
ZC-DWN8922PXA
ZC-DW8550NXA
ZC-DW8550PXA
ZC-DWN8550NXA
ZC-DWN8550PXA
-. 1/3 SONY Super HAD-II CCD
-. Photocell Activate IR Lights at Night (For IR Model)
-. True or Digital Day & Night
-. Auto-sensing DC12V/AC24V Dual-Voltage Operation
-. True WDR(Wide Dynamic Range)
-. Back Light Compensation
-. High Light Compensation
-. Motion Detection
-. Privacy Masking
-. 3D Digital Noise Reduction (3DDNR)
-. Lens Shading Compensation
-. Low Power Consumption
-. Multi Tact Switch for OSD Control
-. IR Optimizer (For IR Model)
-. Sens Up(Slow shutter)
-. Compatible for UTC Communication
TV System
Image Sensor
PAL
2:1 Interlace
1/3" Type Interline Transfer CCD (Sony HAD II CCD)
Effective Elements
976(H) x 494(V)
976(H) x 582(V)
Scanning Frequency
15.734kHz(H) x 59.94Hz(V)
15.625kHz(H) x 50.00Hz(V)
Video Output
1.0Vp-p/75Ω
Horizontal Resolution
More than 700 TVL
Minimum Illumination(F1.4)
Standard Type : D-DN:0.4lx T-DN:0.04lx, IR Type : 0 lx (B/W Model/LED ON)
Day / Night
Digital or True Day / Night
S/N Ratio
More than 50dB (at minimum AGC gain)
Gamma Characteristic
0.45
Sync. System
Internal / Line Lock (Selectable)
White Balance
Back Light
Power
Consumption
1/60 sec, FLK, 1/60-1/100,000 (Selectable)
1/50 sec, FLK, 1/50-1/100,000 (Selectable)
ATW, PUSH, USER1, USER2, MANUAL, PUSH LOCK (Selectable)
BLC, HLC, ATR-EX, WDR, OFF (Selectable)
AC
Power Supply
AC24V±10% 60HZ±1Hz
AC24V±10% 50HZ±1Hz
DC
DC 12V±10%
Standard
3.0 Watt(AC24V), 2.7 Watt(DC12V)
IR Model
Ambient Temperature
ZC-DW8000
Edit : ZC-D8000IR-700_20141219_R1
NTSC
Scanning System
Electronic Shutter
1. UTP Board (ZCA-UP8)
2. Service Monitor Cable (ZCA-SM8)
3. Flush Mount Kit (ZC-FM3)
4. NPT Pendant Mount (ZC7-PM1)
5. NPS Compact Pendant MOunt (ZCA-PA8)
6. Lens Variations
1:1.2~1.6
ZC-DW8039NXA-IR
ZC-DWN8039NXA-IR
89.8~23.9
True
PAL
ZC-DW8039PXA
ZC-DWN8039NXA
Digital
3.3~12mm
NTSC
ZC-DW8039NXA
6.1 Watt(AC24V), 5.9 Watt(DC12V)
Operation : -10℃ to +50℃ / Storage : -20℃ to +60℃
Ambient Humidity
Operation : Max 85%RH / Storage : Max 95%RH
External Dimensions
Standard Type : 122mm(W) x 108.3mm(H), IR Type : 126.4mm(W) x 108.8(H)
Weight
Standard Type : Approx. 280g, IR Type : Approx. 310g
Switches
Multi Tact Switch for OSD Control, Slide Switch for Sync. System
Accessories
Self-tapping Screw : 3ea, Template : 1ea
Instruction Manual : 1ea, Additional Power Connector : 1ea
SERIES
1) MAIN MENU
STANDARD MODEL
1) Slide Switch for Sync. System
Turn the Switch toward Left or Right side, Select Each mode.
① To close, align the
marks and turn
the Top cover toward direction ①
②
Top Cover
①
② To open, align the
・SCENE SELECT
SETUP MENU
marks again.
⇦
1/2
SCENE SELECT
PIC ADJUST
EZOOM
DIS
PRIVACY MASK
MOTION DET
SYS SETTING
EXIT ↲
IR MODEL
⇨
NORMAL ↲
↲
OFF
OFF
↲
OFF
↲
① To close, align the marks and snap
the Top Cover into the Bottom cover
Bottom Cover
① To Close
2) ADVANCED MENU
・EZOOM
・DIS
・PRIVACY MASK
・MOTION DET
・SYS SETTING
☞ Attention
Be careful when the ceiling or wall is not sturdy
enough to hold the snapping pressure.
② To Open
② To open, hold the Bottom Cover and turn the
top cover toward direction ②
・PICT ADJUST
2) Multitact Switch for OSD
NORMAL
INDOOR
OUTDOOR
BACKLIGHT
ITS
CUSTOM
ADVANCED MENU
⇦
1/2
SHUTTER/AGC
WHITE BAL
HLC/BLC
WDR/ATR-EX
DNR
DAY/NIGHT
IR OPTMIZER
RETURN
BRIGHTNESS
CONTRASY
SHARPNESS
HUE
COLOR GAIN
・SUTTER /AGC
ADVANCED MENU
⇨
AUTO ↲
ATW↲
OFF
WDR↲
↲
AUTO
↲
↲
: Digital Image Stabilizer
SYNC MODE
LENS
FLIP
LCD / CRT
COMMUNICATION
CAMERA ID
AUTO
MANUAL
・WHITE BAL
ATW
(PUSH)
(USER1)
(USER2)
(MANUAL)
(PUSH LOCK)
・HLC / BLC
OFF
HLC
(BLC)
・WDR / ATR-EX
CONTRAST
CLEAR FACE
・DAY / NIGHT
AUTO
AUTO
MANUAL
DAY
NIGHT
AE LEVEL
AGC MAX
SENS UP
BURST
DELAY CNT
DAY -> NIGHT
NIGHT -> DAY
・IR OPTMIZER
☞ATTENTION
・Simply make the adjustment in the following
order to help make the focusing easier.
- Select MANUAL
- Adjust lens focus well
- Then return to AUTO
OSD MENU FUNCTION
1. Direction and Lens
☞ For IR model, remove LED cover first, then follow the below instruction.
The camera body is set in a tri-axial mounting allowing movement in the pan, tilt and rotational planes.
1) Adjust the direction of the lens so it faces the subject.
2) Move the lever to adjust focus and angle
3) When you finished adjusting the direction of the lens, tighten the locking screw with a screwdriver.
1)
2)
The positions of focus and zoom
adjustment levers are reversed on
9-22mm and 5-50mm models
3)
SCENE SELECT
Normal, Indoor, Outdoor, Backlight, ITS, Custom
PICT ADJUST
Brightness, Contrast, Sharpness, Hue, Color Gain
EZOOM
MAG, PAN, TILT
DIS
ON / OFF
PRIVACY MASK
PRIVACY MASK SETUP
MOTION DET
MOTION DETECTION
SYSTEM SETTING
SYNC Mode, Lens, Flip, LCD/CRT, Communication, CAMERA ID
LANGUAGE
ENG, ESPANOL, PYCCKNN, PORTUGUES, DEUTSCH, FRANCAIS, 中文, 日本語
MAINTENANCE
W.PIX MASK, CAMERA Reset
EXIT
SAVE, NOT SAVE, CANCEL
1/2
⇨
NORMAL ↲
↲
OFF
OFF
↲
OFF
↲
⇦
2/2
LANGUAGE
ENGLISH
VERSION
1.0
MAINTENANCE
↲
⇨
・LANGUAGE
・VERSION
・MAINTENANCE
EXIT ↲
ADVANCED MENU
W.PIX MASK
MANUAL
AUTO
DATA CLEAR
CAMERA RESET
・EXIT
SETUP MENU
⇦
SCENE SELECT
PIC ADJUST
EZOOM
DIS
PRIVACY MASK
MOTION DET
SYS SETTING
EXIT ↲
SETUP MENU
SAVE
NOT SAVE
CANCEL
BACK
☞ATTENTION
・You may exit from OSD either by SAVE, NOT SAVE to keep, delete, or temporarily
hold the changes that you made.
⇦
2/2
LENS SHD COMP
DEFOG
FLK LESS
ANTI CR
RETURN↲
⇨
OFF
ON↲
OFF↲
OFF
・LENS SHD COMP
・DEFOG
・FLK LESS
・ANTI CR
OFF
ON
AUTO
OFF
ON
AUTO
: Anti Color Rolling