instruction manual
Transcription
instruction manual
ICC Required Tools INSTRUCTION MANUAL Power Tool with Phillips head 1/2” Wrench H1 SERIES ALUMINUM Fullsize Van & Sprinter Low top 02- 06 PART# DESCRIPTION 1 BAR 2 BAR 3 BAR 4 Bar SS-B016 5/16” X 1 1/4” CARRIAGE BOLT 4 8 12 16 SS-B018 5/16” X 1 3/4” Carriage bolt 1 2 4 5 SS-B201 1/2” PHILLIP TAP SCREWS` 4 8 12 16 SS-W008 5/16” X 3/4” WASHER 4 8 12 16 SS-N005 5/16” NYLON NUTS 4 8 12 16 SS-N016plastic knob 0245 A02Ladder Guide 0122 A06Ladder Stopper 0123 a69EZ velcro strap 0123 BG548/49/54/55Rubber bar guard 48”,49”,54”,55” 1 2 3 4 h11DRIP RAIL CLAMP 2” X 8” 2 4 6 8 ITEMs (not drawn to scale) Upright Mounting base (Refer to chart below) 2468 Cross Bar (Refer to chart below) 1234 Rubber Seat 2468 VEHICLE 1ST BAR (FRONT) 2ND BAR 3RD BAR 4TH BAR (REAR) CHEVY VAN UP TILL 96 9”, 63” 9”, 63” 9”, 63” 9”, 63” CHEVY EXPRESS 96-ON 9”, 57” 8 3/8”, 57” 8 3/8”, 57” 9”, 56” DODGE RAM VAN ALL YEARS 9”, 63” 9”, 63” 9”, 63” 9”, 62” FORD ECONOLINEUP TILL 1991 9”, 63” 9”, 63” 9”, 63” 9”, 63” FORD ECONOLINE 92-ON 9”, 63” 8 3/8”, 63” 8 3/8”, 63” 9”, 62” GMC VANUP TILL 96 9”, 63” 9”, 63” 9”, 63” 9”, 63” GMC SAVANA 96-ON 9”, 57” 8 3/8”, 57” 8 3/8”, 57” 9”, 56” SPRINTER 02-06 LOW TOP 9”, 65” 9”, 65” 9”, 65” 9”, 65” 1 Packaged by Date [ ] Ford Econoline 1992 & On [ ] Dodge Ram Van (All Years) Upright Mounting Base Heights Upright Mounting Base Heights 9” 8 3/8” 8 3/8” 9” 9” Crossbar Lengths 62” 63” 9” 9” 9” Crossbar Lengths 63” 63” 62” 63” 63” 63” [ ] Chevy Van (till 96) [ ] GMC Savana 1996 & On [ ] GMC Van (till 96) [ ] GMC Express 1996 & On [ ] Ford Econoline (till 1991) Upright Mounting Base Heights Upright Mounting Base Heights 9” 9” 9” 9” 9” Crossbar Lengths 63” 63” 63” 8 3/8” 8 3/8” 9” Crossbar Lengths 63” 56” 2 57” 57” 57” [ ] Sprinter Low Top (2002-06) [ ] Sprinter High Top (2002-06) Upright Mounting Base Heights 9” 9” 9” Upright Mounting Base Heights 16” 9” 16” Crossbar Lengths 65” 65” 65” 16” 16” Crossbar Lengths 65” 65” 65” 65” 65” EZ-Velcro Strap (Not Included) How it works (Ladder) (Rear cross-bar) Insert rear cross-bar into opening of EZ-velcro straps. Slide strap around equipment the through steel ring. Rubber Bar Guards - Press the Rubber Bar Guard into the channels of cross bars. - Use a solid object to press down if necessary ie. book, block or pipe. Rubber Seats for Pull EZ-velcro to secure via velcro. Upright Mounts - Slide the Rubber Seats onto th bottom of the Upright Mounts. - These prevent metal on metal contact for vehicles without a protective layer on their drip rail. 3 -Height of upright and length of crossbars are vehicle specific. Please refer to page 3 for correct measurements. -Front bar should be positioned 6” behind front doors to prevent wind noise/rattle. -Refer to chart on page 3 for correct upright and bar positioning. Chevy Express 96-Present GMC Savana 96-Present Secure the mounting plate to the “top” holes of the upright mounts. Chevy Van GMC Up & Till 96 Dodge All Years Dodge Sprinter 2002-2006 Ford All Years Secure the mounting plate to the “bottom” holes of the upright mounts. -For Ford Econoline 92-present turn the mounting plate so the hole are slightly higher. -Except for the Passenger side barn door. Flip the mounting plate 180° so doors can open freely. 180° 4 N005 W008 90° +90° B201 B016 -Tightly secure hardware. -Upright mounting base will crimp the drip rail andangle outwards as hardware is tightened. Push the upright so it’s 90 degrees then secure with tap screws. Ladder Stopper A02 B018 N016 ) (FRONT BAR - Ladder Stopper can be installed in the front bar with tip facing the rear, allowing the ladder steps to fit in between. The bend of the Ladder Stopper prevent the ladder from rattling. Ladder Guide A06 B018 N016 (REAR or MID DLE BAR) - Ladder Guide can be installed in the rear bar or middle bar to guide ladders down the system. 5 Accessories ST E E L & | H1 A L U M I N U M A02 Steel Cross Bar A06 Plastic Bar Guards Part # Description Size Bar Type MSRP Part # Description Height Bar Type Color MSRP A02 Ladder Guide 5.5” 1” X 2” 14.95 A63 Push to Secure 6”-8” 1” X 2” Black or white $59.00 A06 Ladder Stopper 5” 1” X 2” 15.95 Ì Ladder Stopper and Guides prevent items from sliding forward and allows easy bungee and tie-down. Ì Galvanized and dipped in rubber for durability. Ì Secure your ladder with the Vantech push 2 secure system. Part # Description Length MSRP A42 A50 Plastic Bar Guards 42” 5.00 Plastic Bar Guards 56” 6.00 A88 Plastic Bar Guards 63” 7.00 A89 Plastic Bar Guards 72” 8.00 A41 Plastic Bar Guards 84” 9.00 A60 Plastic Bar Guards 96” 10.00 Ì Clamps onto cross bar with 2” X 1” with “C” clamps. Ì For Steel Systems Ì Holds ladders 6”-8” in height. Ì Prevents scratch and damage to crossbars Ì Easy turn knob allows quick adjustment and removal. Aluminum Cross Bar Rubber Bar Guards Vantech 6” conduit carrier. Spring assist rear door for a water tight seal. Padlock tab for rear hatch door. A35 requires drilling into cross bars. A34 is a direct bolt-on if you have aluminum cross bars with built-in channels on top. Part # Description Length Capacity MSRP A69 EZ Velcro Strap 10” 75 lbs 13.95 A81 Adjustable Extension Arm with 8” Convex Mirror 25”-32 Black or White 79.00 Ì Made from aluminum material. Bolts onto the eyehooks on the H series mounting base. Ì No drilling is required. Extension arm can adjust in length and angle. Ì Convex mirror is 8” wide stainless steel. Rubber Bar Guards 65" 16.00 A52 Rubber Bar Guards 72" 18.00 A36 Rubber Bar Guards 84" 20.00 A85 Rubber Bar Guards 96" 22.00 Bar Type Color MSRP Ì For aluminum systems with channels A35 6” Universal Silver 89.00 Ì Prevents scratch and damage to crossbars A34 6” Conduit Carrier (Slider bolt-on) 6” Aluminum Channels Silver 89.00 Ì 6” PVC pipe not included. MSRP 12.00 A86 Width Ì Includes: Front cap, rear door, 2 “U” brackets and hardware. Color MSRP 48" Description Ì Loops into cross bar up to 2” X 1”. Length Length Rubber Bar Guards 6” Conduit Carrier (drilling required) Ì Holds up to a maximum of 75 lbs in combination with the ladder stopper or guide. Description Description A51 Part # Ì Strap a ladder with the EZ velcro straps. Part # Part # Part # Description Width Bar Type Material Color MSRP A38 Wind Foil 24" 1” X 2” Aluminum Black / White 35.00 A39 Wind Foil 36" 1” X 2” Aluminum Black / White 36.00 A53 Wind Foil 48" 1” X 2” Aluminum Black / White 37.00 A54 Wind Foil 60" 1” X 2” Aluminum Black / White 40.00 A55 Wind Foil 63" 1” X 2” Aluminum Black / White 42.00 Ì Reduces windnoise if present Part # Description Length Capacity MSRP A62 VR 500 Ratchet Tie-Down 10’ 150 lbs 35.00 Ì Attach the Vantech Ratchet tie-down to the eyehooks on the mounting uprights with 1/2” bolts. Ì Installed onto eyehooks Reduces wind noise and vibration & still allows optional accessories for cross bar. 6 Ì Sold as individuals