Digimatic Scale Unit

Transcription

Digital Scale and DRO Systems
ABSOLUTE DIGIMATIC
SCALE UNITS
Catalog No. E316-572R
ABSOLUTE Digimatic Scale Units
Strengthened lineup includes new coolant-proof models
and incorporates absolute scale technology throughout
Horizontal single function type
572-202-20
Horizontal multi-function type
Vertical single function type
572-461
Absolute functions
• Absolute scale technology prevents overspeed errors.
• T he coordinate origin (ABS point) can be set to desired position and stored. A previously
set ABS point is retained even when the power is off, so the current true position is
displayed immediately after power-on.
Note: The ABS point reverts to the default value when the battery is removed or replaced.
Long battery life
Vertical multi-function type
• Single function types feature very long battery life (about 20,000 hours), thus providing
lower-cost operation and environmental benefit. (Coolant-proof type: about 15,000
hours)
Small and light
• Smaller display unit allows use as a positioning sensor for jigs and tools as well as on
small machine tools.
ABSOLUTE Coolant-proof Digimatic Scale Units
572-602
572-601
IP66 protection code compliant (ABSOLUTE Coolant-proof Digimatic Scale Units only)
• Featuring absolute scale technology with a new detection method (electromagnetic
induction*1*2) that makes the unit usable in hostile environments where it is exposed to
water or coolant spray.
*1: For details of the electromagnetic induction detection method, see page 5.
*2: Patents registered in Japan, the USA and Europe (Germany, the UK, France and
Switzerland). Patents pending in India and China.
• P osition data can be output to external devices using the waterproof connecting cable
dedicated to ABSOLUTE Coolant-proof Digimatic Scale Units.
2
572-303-10
572-561
Typical applications
Machine table positioning
Drilling machine stroke position
Tool presetting
Focus setting on optical instruments
Special applications
Multi-head
applications
XY coordinate
measurement
Non-standard units can be made to special order. Contact your local sales office for more information.
3
System diagram
Scale units
Display units and peripheral devices
ABSOLUTE Coolant-proof Digimatic Scale Units
EC counter
*2
Tolerance judgment output
For details, see page 10.
DP-1VR
No.264-504-5A
*3
Palmtop printer for providing a
hardcopy of the results of a
statistical analysis of scale unit output
MIG-4A
No.982-548-10A
*3
RS-232C output
Converter for scale output via
RS-232C interface
IT-012U
No.264-012-10
Horizontal multi-function type
*3
Data entry via USB
Converter for scale output via USB
keyboard interface
*The EC counter can also be connected to input tools through RS-232C
converter (264-007) or PS/2 keyboard signal converter (264-005) cables.
*2
Waterproof connecting cables with output switch
Connecting cables with output switch
1m: 05CZA624
2m: 05CZA625
1m: 959149
2m: 959150
Connecting cables (See the following)
Horizontal multi-function type with diameter display function
Vertical multi-function type with diameter display function
1m: 905338
2m: 905409
1m: 905691
2m: 905692
1m: 905689
2m: 905690
1m: 905693
2m: 905694
Connecting cables 1m: 936937
2m: 965014
*1: Tolerance judgment or Digimatic is selected as an output when setting parameters.
*2: Waterproof connecting cable with output switch can be used only for ABSOLUTE Coolant Proof Digimatic Scale Units.
*3: All scale units can also be used by connecting them directly to the DP-1VR, MIG-4A or 264-012-10, not through the EC counter.
In such cases, use a cable that connects the scale unit with the EC Counter. USB input direct cables are also available.
4
Scale unit functions
ABSOLUTE Coolant-proof
Digimatic Scale Units
Type
Horizontal multi-function type with
Function
Function
Symbol
diameter display function
Horizontal single function type Horizontal multi-function type
Vertical multi-function type with
diameter display function
ORIGIN
3
3
3
3
ZERO
3
3
3
3
Direction changeover
DIR
–
–
3
–
Presetting
PRE
–
–
3
3
Display holding
HOLD
–
33
3
3
Data output
M-SPC
3
3
3
3
Dia.
–
–
–
3
Alarm for faulty counting
E
3
3
3
3
Low battery-voltage alarm
B
3
3
3
3
ABS point setting
Zero-setting
Diameter display
3 Standard feature 33 A hold switch (option: No. 959143) must be used.
*In all scale units, switching between ABSOLUTE Mode and Incremental Mode is possible.
The ZERO/ABS key allows the display to be zero-set at any slider position along the beam for incremental comparison measurements.
This key also allows return to ABSOLUTE Mode with a display of the true position from the origin point.
Highly robust design. The Digimatic scale is safely embedded in a hardened, stainless steel bar.
The following is a brief description of each function.
ORIGIN
ABS point (0.00) can be set to the desired point and stored.
Can be used only when the unit is in ABSOLUTE Mode
ZERO
Displayed value can be cleared (zero-set) at the desired position.
Can be used only when the unit is in Incremental Mode.
DIR
Reverses the direction of measurement.
PRE
HOLD
M-SPC
Desired value can be preset as a displayed value. A ± sign
can also be set.
Holds the displayed value. When this function is released,
the display reverts to displaying the current true position.
The main unit features an output connector, which allows
connection with the DP-1VR digimatic mini processor or
other devices. When the DP-1VR is connected, various
statistical analysis processing, creation of histograms, and
printing can be performed.
Dia.
E
B
The doubled scale displacement can be displayed. This
comvenient feature can be used to display the diameter of
workpieces being machined on a lathe.
If a position reading cannot be displayed due to noise or
other reasons, an error is displayed.
B is displayed when battery voltage becomes low, indicating
that the battery needs to be replaced soon.
5
ABSOLUTE Coolant-proof
Digimatic Scale Units
Horizontal single
function type
Inch type, Inch/Metric switching type, or Metric type can be selected.
572-612
0-8"
.001"
572-615
0-8"
0.03mm/.001"
572-602
0-200mm
0.03mm
311mm/287mm
430g
DIMENSIONS Unit:mm
L1
*1 Only connecting cables with an output switch dedicated for ABSOLUTE Coolant-proof Digimatic Scale Units
(No.05CZA624/1m, No.05CZA625/2m) can be used.
L2
32.6
6: Water resistant
31
24
13.5
3.5
6
ON,OFF/ORIGIN switch
1.6
3.5
35
What is electromagnetic induction?
• C urrent I1, which changes with
time, flows through coil L1,
generating a magnetic field around
coil L1 and adjacent coil L2.
•A
voltage V2 is induced in L2 which
causes a current l2 to flow in the
direction that opposes change in
the magnetic field.
L1
This principle is applied to ABSOLUTE Coolant Proof Digimatic
I1
Scales. The induction between coils offers excellent water
I2
V2
resistance and oil resistance. Absolute detection is achieved
V
by synthesizing position data with arrangements of two-row
L2
graduations on the main scale.
6
12
8
40.9
16
Description
Complete protection against
ingress of dust
A powerful water jet directed
at the enclosure from any
direction has no harmful
effect
6: Dustproof
10
2.3
Protection against the
ingress of water
Level
ZERO/ABS switch
Tapped insert for
mounting (rear side)*6
2-M3×0.5
13.5
Protection
Protection against the
ingress of foreign bodies
6.6
*2 Not including quantizing error ±1 count
*3 High slider speed does not cause data errors. Position feedback and output data may not be used while the slider
is moving.
*4 Patents registered in Japan, the USA, and Europe (Germany, the UK, France, and Switzerland), patents pending in
India and China.
*5 Protection code: IP66. This product is not waterproof. (Anti-corrosion treatment is required after use.)
*6 Tapped insert: No.5-40 UNC (Inch type, Inch/Metric switching type) / 2-M3x0.5 (Metric type) Screwed depth on the
rear side of display unit: under 2mm
4.6
57.5
1.6
572-611
0-6"
.001"
572-614
0-6"
0.03mm/.001"
572-601
0-150mm
0.03mm
259mm/235mm
410g
Resolution: 0.01mm or 0.0005"/0.01mm
Repeatability: 0.01mm
Response speed*3: Unlimited
Length standard: ABSOLUTE electromagnetic induction encoder*4
Dust/Water protection level*5: IP66
Battery: SR44 (1pc. , 938882)
Battery life: Approx. 1.5 years under normal use
12
572-610
0-4"
.001"
572-613
0-4"
0.03mm/.001"
572-600
0-100mm
0.03mm
209mm/185mm
390g
B
7
E
7
M-SPC
15
Order No.
Range
Accuracy *2
Order No.
Inch / Metric Range
Accuracy *2
Order No.
Metric
Range
Accuracy *2
L1 / L2
Dimensions
Mass
Inch
COMMON SPECIFICATIONS
*1
ZERO
2.3
FUNCTION ORIGIN
SPECIFICATIONS
15
Horizontal single
function type
Either Inch/Metric switching type or Metric type can be selected.
FUNCTION ORIGIN
SPECIFICATIONS
Order No.
Inch / Metric Range
Accuracy *3
Order No.
Metric
Range
Accuracy *3
L1 / L2
Dimensions
Mass
*1
ZERO
HOLD
572-210-20
0-4"
0.03mm/.001"
572-200-20
0-100mm
0.03mm
209mm/185mm
235g
*2
M-SPC
572-211-20
0-6"
0.03mm/.001"
572-201-20
0-150mm
0.03mm
259mm/235mm
255g
E
DIMENSIONS Unit:mm
B
572-212-20
0-8"
0.03mm/.001"
572-202-20
0-200mm
0.03mm
311mm/287mm
275g
572-213-10
0-12"
0.04mm/.002"
572-203-10
0-300mm
10
0.04mm
444mm/420mm
370g
572-200-20~572-202-20
572-210-20~572-212-20
L1
in/mm conversion swich
(in/mm method)
L2
6
ORIGIN switch
Tapped insert for mounting (rear side)*5
2-M3×0.5
35
4.
8
L1
L2
13.5
40
ZERO/ABS
switch
22
6
(in/mm method)
ORIGIN switch
4.6
20
40.7
4-M3×0.5
6.6
24
12.4
ZERO/ABS switch
1.6
2.5
15.1
3.8
7
70.8
3.5
14.3
Power ON/OFF switch
2.3
13.5
7
36
59.2
9
Power ON/OFF switch
572-203-10, 572-213-10
16
29
Repeatability: 0.01mm or 0.0005"/0.01mm
Response speed: Unlimited*4
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Battery: SR44 (1pc. 938882)
38.9
Vertical single
function type
DIMENSIONS Unit:mm
*2
M-SPC
E
B
L1
L2
572-312-10
0-8"
0.03mm/.001"
572-302-10
0-200mm
0.03mm
344mm/320mm
275g
572-313-10
0-12"
0.04mm/.002"
572-303-10
0-300mm
0.04mm
444mm/420mm
370g
(in/mm method)
6
ZERO/ABS switch
Power ON/OFF switch
72.1
24
2.5
14.6
3.8
7
4.6
6.6
572-311-10
0-6"
0.03mm/.001"
572-301-10
0-150mm
0.03mm
294mm/270mm
255g
36
572-310-10
0-4"
0.03mm/.001"
572-300-10
0-100mm
0.03mm
244mm/220mm
235g
4-M3×0.5
16.3
40
ORIGIN switch
12.4
HOLD
20
35.4
Order No.
Inch / Metric Range
Accuracy *3
Order No.
Metric
Range
Accuracy *3
L1 / L2
Dimensions
Mass
*1
ZERO
9
FUNCTION ORIGIN
SPECIFICATIONS
Repeatability: 0.01mm or 0.0005"/0.01mm
Response speed: Unlimited*4
1.6
OPTIONAL ACCESSORIES
Hold switch
Connecting cable with output switch
*1 A hold switch (No. 959143), an optional accessory, is required. The output function cannot be used at the same time.
*2 Connecting cables on page 3 and connecting cables with output switch (No. 959149/1m and No. 959150/2m) can be used.
*4 High slider speed does not cause data errors. Position feedback and output data may not be used while the slider is moving.
*5 Tapped insert: No.5-40 UNC ( Inch/Metric switching type) / 4-M3x0.5 (Metric type) Screwed depth on the rear side of display unit: under 2mm
959143
7
1m:959149
2m:959150
Horizontal multifunction type
FUNCTION ORIGIN
SPECIFICATIONS
Order No.
Inch / Metric Range
Accuracy *1
Order No.
Metric
Range
Accuracy *1
L1 / L2
Dimensions t / G / H
Mass
ZERO
PRE
DIR
HOLD
572-470
0-4"
0.03mm/.001"
572-460
0-100mm
0.03mm
244mm/220mm
572-471
0-6"
0.03mm/.001"
572-461
0-150mm
0.03mm
294mm/270mm
250g
280g
M-SPC
E
572-472
0-8"
0.03mm/.001"
572-462
0-200mm
0.03mm
344mm/320mm
572-473
0-12"
0.04mm/.002"
572-463
0-300mm
0.04mm
444mm/420mm
310g
370g
–
B
572-474
572-475
0-18"
0-24"
0.04mm/.002"
0.05mm/.002"
572-464
572-465
0-450mm
0-600mm
0.04mm
0.05mm
594mm/570mm 774mm/750mm
6mm/23.2mm/14.6mm
760g
900g
572-476
572-477
0-32"
0-40"
0.06mm/.0025" 0.07mm/.0025"
572-466
572-467
0-800mm
0-1000mm
0.06mm
0.07mm
974mm/950mm 1174mm/1150mm
10mm/27.2mm/18.6mm
1710g
2040g
Repeatability: 0.01mm or 0.0005"/0.01mm Response speed*2: Unlimited
Battery life: Approx. 5000 hours in continuous use
Tapped insert for mounting*4
(rear side)
Preset switch
572-464~572-467
572-474~572-477
4.6
24
ZERO/ABS switch
ON/OFF,ORIGIN switch
24
ZERO/ABS switch
6
Preset switch
1.6
H
t
4
G
1.6
12.4
3.8
2.5
18.5
7
7
HOLD/DATA,+/- switch
36
20
6.6
4-M3×0.5
4-M3×0.5
(in/mm method)
84
40
6.6
4.6
22
36
6
20
42
71.1
40
9
(rear side) 13.5
L1
L2
L1
L2
9
572-460~572-463
572-470~572-473
(in/mm method)
41.3
DIMENSIONS Unit:mm
Vertical multifunction type
FUNCTION ORIGIN
SPECIFICATIONS
Order No.
Inch / Metric Range
Accuracy *1
Order No.
Metric
Range
Accuracy *1
L1 / L2
Mass
ZERO
PRE
DIR
HOLD
572-570
0-4"
0.03mm/.001"
572-560
0-100mm
0.03mm
244mm/220mm
572-571
0-6"
0.03mm/.001"
572-561
0-150mm
0.03mm
294mm/270mm
250g
280g
M-SPC
E
572-572
0-8"
0.03mm/.001"
572-562
0-200mm
0.03mm
344mm/320mm
572-573
0-12"
0.04mm/.002"
572-563
0-300mm
0.04mm
444mm/420mm
310g
370g
–
B
572-574
572-575
0-18"
0-24"
0.04mm/.002"
0.05mm/.002"
572-564
572-565
0-450mm
0-600mm
0.04mm
0.05mm
594mm/570mm 774mm/750mm
6mm/23.2mm/14.6mm
760g
900g
572-576
572-577
0-32"
0-40"
0.06mm/.0025" 0.07mm/.0025"
572-566
572-567
0-800mm
0-1000mm
0.06mm
0.07mm
974mm/950mm 1174mm/1150mm
10mm/27.2mm/18.6mm
1710g
2040g
Repeatability: 0.01mm or 0.0005"/0.01mm Response speed*2: Unlimited
(rear side)
6
Preset switch
4.6
6.6
36
20
36
24
ZERO/ABS switch
24
1.6
H
4
G
t
1.6
12.4
7
7
ZERO/ABS switch
3.8
572-564~572-567
572-574~572-577
22
4-M3×0.5
36
4.6
L1
L2
84
40
20
42
6
6.6
4-M3×0.5
Preset switch
(in/mm method)
9
72.7
40
2.5
18.1
572-560~572-563
572-570~572-573
(in/mm method)
L1
L2
(rear side) 16.6
9
DIMENSIONS Unit:mm
8
Horizontal multi-function
type with diameter
display function
Either
Inch/Metric switching type or Metric type can be selected.
FUNCTION ORIGIN
SPECIFICATIONS
ZERO
Order No.
Inch / Metric Range
Accuracy *1
Order No.
Metric
Range
Accuracy *1
L1 / L2
Mass
PRE
HOLD
572-490-10
0-4"
0.03mm/.001"
572-480-10
0-100mm
0.03mm
244mm/220mm
572-491-10
0-6"
0.03mm/.001"
572-481-10
0-150mm
0.03mm
294mm/270mm
250g
280g
M-SPC
Dia.
E
572-492-10
0-8"
0.03mm/.001"
572-482-10
0-200mm
0.03mm
344mm/320mm
572-493-10
0-12"
0.04mm/.002"
572-483-10
0-300mm
0.04mm
444mm/420mm
310g
370g
–
B
572-494-10
572-495-10
0-18"
0-24"
0.04mm/.002"
0.05mm/.002"
572-484-10
572-485-10
0-450mm
0-600mm
0.04mm
0.05mm
594mm/570mm 774mm/750mm
6mm/23.2mm/14.6mm
760g
900g
572-496-10
572-497-10
0-32"
0-40"
0.06mm/.0025" 0.07mm/.0025"
572-486-10
572-487-10
0-800mm
0-1000mm
0.06mm
0.07mm
974mm/950mm 1174mm/1150mm
10mm/27.2mm/18.6mm
1710g
2040g
Repeatability: 0.01mm or 0.0005"/0.01mm (Radius indication, not diameter)
6
4.6
4-M3×0.5
36
20
9
HOLD/DATA,øswitch
Preset switch
41.3
6.6
572-483-10~572-487-10
572-494-10~572-497-10
24
(in/mm method)
Preset switch
6
4.6
24
ZERO/ABS switch
1.6
H
t
4
G
1.6
12.4
3.8
2.5
18.5
7
7
ZERO/ABS switch
22
84
40
6.6
4-M3×0.5
572-480-10~572-483-10
572-490-10~572-493-10
(rear side)
36
71.1
40
(rear side) 13.5
L1
L2
HOLD/DATA,øswitch
20
42
Unit:mm
L1
L2
9
(in/mm method)
DIMENSIONS
Vertical multi-function
type with diameter
display function
FUNCTION ORIGIN
SPECIFICATIONS
ZERO
Order No.
Inch / Metric Range
Accuracy *1
Order No.
Metric
Range
Accuracy *1
L1 / L2
Mass
PRE
HOLD
572-590-10
0-4"
0.03mm/.001"
572-580-10
0-100mm
0.03mm
244mm/220mm
572-591-10
0-6"
0.03mm/.001"
572-581-10
0-150mm
0.03mm
294mm/270mm
250g
280g
M-SPC
Dia.
E
572-592-10
0-8"
0.03mm/.001"
572-582-10
0-200mm
0.03mm
344mm/320mm
572-593-10
0-12"
0.04mm/.002"
572-583-10
0-300mm
0.04mm
444mm/420mm
310g
370g
–
B
572-594-10
572-595-10
0-18"
0-24"
0.04mm/.002"
0.05mm/.002"
572-584-10
572-585-10
0-450mm
0-600mm
0.04mm
0.05mm
594mm/570mm 774mm/750mm
6mm/23.2mm/14.6mm
760g
900g
572-596-10
572-597-10
0-32"
0-40"
0.06mm/.0025" 0.07mm/.0025"
572-586-10
572-587-10
0-800mm
0-1000mm
0.06mm
0.07mm
974mm/950mm 1174mm/1150mm
10mm/27.2mm/18.6mm
1710g
2040g
Repeatability: 0.01mm or 0.0005"/0.01mm (Radius indication, not diameter)
(rear side)
4.6
36
HOLD/DATA,øswitch
22
84
40
HOLD/DATA,øswitch
6
Preset switch
4.6
24
ZERO/ABS switch
24
9
1.6
H
7
4
G
t
1.6
12.4
3.8
2.5
18.1
7
ZERO/ABS switch
572-584-10~572-587-10
572-594-10~572-597-10
4-M3×0.5
6.6
(in/mm method)
(in/mm method)
36
6
6.6
4-M3×0.5
L1
L2
Preset switch
20
42
72.7
40
20
36
572-480-10~572-583-10
572-490-10~572-593-10
L1
L2
(rear side) 16.6
9
Unit:mm
9
DIMENSIONS
Display Unit
EC counter
FEATURES
This Digimatic Display Unit with GO/NG judgement function offers a large, easily read display for a Digimatic Scale Unit.
The bright LED readout is ideal for low-light situations or when the scale unit must be located where its own display cannot be viewed directly.
Power ON/OFF switch
Preset/Tolerance switch
Front panel
Rear panel
Input connector
Preset switch
ZERO switch
Display
Tolerance judgment result indicator
tolerance judgment
Output
results output
(switching control)
data output
Input
Power Supply
Operating temperature
Storage temperature
Mass
DIMENSIONS Unit:mm
48
542-007A
0.01mm(±9999.99mm)
.0005"(±99.9995") / .001"(±999.99")
0.001mm(±999.999mm)
.00005"(±9.99995") / .0001"(±99.999")
Display of + and - signs and
6-digit measurement data
LED (Orange, Green, Red)
96
-NG / GO / +NG (open-collector output)
Code No.
Model
Serial No.
Digimatic
Preset, HOLD
AC adapter*1
0°C to 40°C
-10°C to 50°C
220g
6.6
542-007
EC-101D
000001
44.4
Resolution
AC adapter jack
Ground terminal
SPECIFICATIONS
Order No.
Output connector
44.4
Tolerance judgment result indicator
(Orange: -NG / Green: GO / Red: +NG)
91.4
*1 Standard accessory
The dedicated AC adapter AD908 is supplied with one of the following, according to the order number.
542-007A:AD908AN(No.526688A)(for USA)
Optional accessories
Connecting cables: 936937(1m),965014(2m)
DC plug PJ-2: 214938
Connecting cable: C162-155(2m)
10
67
(8)
OUT
OUT
Output connector specifications
The output can be switched to either the tolerance judgment I/O or Digimatic output.
The following shows the detailed specifications when the tolerance judgment I/O is selected.
(3) I/O circuit
a. Output circuit ( -NG / GO / +NG )
The transistor is on during open-collector output at low level.
(1) Connecting cable: C162-155(2m)
Maximum applied voltage = 24VDC
(2)
Output
pin assignment
Maximum
sinkconnector
current = 10mA
Surge absorber diode
Maximum saturation voltage = 0.7VDC
OUTEC counter
TD62583 or its
equivalent
Maximum sink current = 10mA
Maximum saturation voltage = 0.7VDC
Output
0.01µF
Surge absorber diode
EC counter
TD62583 or its
equivalent
COM
Color of the
Signal
Pin No. I/O
Function
lead wire in the
name
optional I/O cable
1
COM
Connection to internal GND
Brown,Black
Brown,Red
2
O Maximum
+NGsink current
= 10mA
Tolerance
output: Relevant pin output
is low level.
Surge absorber
diode
voltage
= 0.7VDC
3
O Maximum
GO saturation
Yellow,Black
When
an error
is displayed: +NG and -NG pins are
EC counter
low level.
4
O
-NG
Yellow,Red
Maximum source current = 1mA
5
I
HOLD
HOLD
input
Green,Black
TD62583
or
its
Input voltage: High level = 4-24VDC
Output
equivalent Preset input
6
ILow levelP.SET
Green,Red
= 1VDC maximum
0.01µF
10
F.G.
Shield (internally connected to the case)
White,Red
EC counter
Leave
the other pins unconnected.
+5V
COM
5Kare different for the Digimatic output mode. The I/O cable should be
Note that the output functions of the connector
pins
5K
connected after the output mode is set.
The free end of the I/O cable terminates in seven wires which have to be connected according to purpose.
Connect the F.G. line (with solderless terminals)
to the ground terminal of the equipment to be connected.
0.01µF
COM
b. Input circuit (Preset, HOLD)
Input is valid at "low" level.
Low level = 1VDC maximum
EC counter
+5V
5K
5K
0.01µF
Reference circuit for external devices.
Use open-collector output, relay
output, or the like.
Timing chart
Output
0.01µF
Low level = 1VDC maximum
EC counter
+5V
Tolerance output
5K
5K
Upper limit
Lower limit
0.01µF
*100ms
Data
-NG
Upper limit
*100ms
Lower limit
+NG
Preset and HOLD inputs
*100ms
Data
-NG
*100ms
+NG
PSET
MIN10ms
MIN10ms
Upper limit
*Preset and HOLD input signals are active low.
Lower limit
PSET
MIN10ms
*100ms
Data
-NG
*100ms
+NG
PSET
MIN10ms
MIN10ms
MIN10ms
11
Coordinate Measuring Machines
Vision Measuring Systems
Form Measurement
Optical Measuring
Sensor Systems
Test Equipment and
Seismometers
Digital Scale and DRO Systems
One Number to Serve You Better
Small
Tool Instruments
and
1-888-MITUTOYO
(1-888-648-8869)
Data Management
Aurora, Illinois
(Corporate Headquarters)
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average
values. We therefore reserve the right to make changes to the corresponding designs. The stated standards, similar
technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the
latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be
regarded as definitive.
Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of Mitutoyo products may require prior approval by an appropriate governing authority.
Trademarks and Registrations
Note: All information
our products,
and in particular
the illustrations,
dimensional
and performance
data contained
this pamphlet,where
as well as other
Designations
used byregarding
companies
to distinguish
their
productsdrawings,
are often
claimed
as trademarks.
In allin instances
technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs, dimensions and weights.
Mitutoyo
America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The
The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. Only quotations submitted by ourselves
appropriate
companies
should be contacted for more complete trademark and registration information.
may be regarded
as definitive.
Our products
are classified
as regulated
items under
Foreign Exchange
We reserve
the right
to change
specifications
andJapanese
prices without
notice. and Foreign Trade Law. Please consult us in advance if you wish
Westford, Massachusetts
Mitutoyo
Huntersville,
NorthCorporation
Carolina
20-1,
Sakado
Mason,
Ohio
1-Chome,
Takatsu-ku,
Kawasaki-shi,
Plymouth, Michigan
213-8533, Japan
CityKanagawa
of Industry, California
T
+81
(0)
44
813-8230
Birmingham, Alabama
F +81 (0) 44 813-8231
http://www.mitutoyo.co.jp
to export our products to any other country. If the purchased product is exported, even though it is not a regulated item (Catch-All controls
item), the customer service available for that product may be affected. If you have any questions, please consult your local Mitutoyo sales office.
© 2013 Mitutoyo America Corporation, Aurora IL
0213-02 • Not Printed • Feb. 2013
Precision is our Profession
37 0705 1 D (NE) NE, Printed in Japan
Our products are classified as regulated items under
Japanese Foreign Exchange and Foreign Trade Law.
Please consult us in advance if you wish to export our
products to any other country. If the purchased
product is exported, even though it is not a regulated
item (Catch-All controls item), the customer service
available for that product may be affected. If you have
any questions, please consult your local Mitutoyo sales
office.

Digimatic Scale Unit

Transcription

Similar documents

Digimatic Scale Units

MITUTOYO Digimatic Scale

H-1 Digital Scale and DRO Systems INDEX 2D Image

D-1 Small Tool Instruments Calipers Height Gages Depth