Third-Party Adapter

Transcription

Third-Party Adapter

Third-Party Adapter
I n s t a l l a t i o n
G u i d e
Notice to Users
©2003 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.
2WIRE PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS
MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION, IN NO EVENT SHALL 2WIRE, INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR
SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE,
OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.
2Wire, Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by
the terms of a separate user license agreement.
Updates and additions to software may require an additional charge. Subscriptions to online service providers may require a fee and credit card information. Financial services may
require prior arrangements with participating financial institutions.
2Wire, the 2Wire logo, OfficePortal, and HomePortal are trademarks of 2Wire, Inc. All other trademarks are trademarks of their respective owners.
___________________________________________________________________________________________________________________________
Contents
Preface
Finding Information in this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Hardware Installation Instructions
Installing PCI cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installing PCMCIA cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing USB Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing the PC Port Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the PC Port adapter on a Windows PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the PC Port adapter on a Macintosh Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the 5-Port Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before You Install the 5-Port Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Identifying the Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the 5-Port Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Identifying the LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the 4-Port USB Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the 4-Port USB Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing Drivers for Windows 98SE
Installing the Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing Drivers for Windows ME
Installing the Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing Drivers for Windows 2000
Installing the Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Installing Drivers for Windows XP
Activating Drivers for Adapters with Built-in Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installing Drivers for the Ethernet PC, Ethernet USB, and PC Port Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installing Drivers for the Wireless PC Card and USB Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installing Drivers for the Mac OS
Installing the Drivers for the PC Port Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Installing the Drivers for MacOS 8.6 to 9.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Installing the Drivers for MacOS 10.1.3 or higher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installing the Drivers for the Ethernet PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Troubleshooting Tips
PCI Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Internal Phoneline Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Internal Wireless Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Windows PCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Verifying IP Address for Windows 95, 98, and ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Verifying IP Address for Windows NT, 2000, and XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Preface
This Adapter Installation Guide contains information on how to install and configure your networking
solution. As part of your networking solution, you may have received one or more of the following pieces
of hardware:
•
Ethernet Internal Card — The Ethernet Internal Card is a standard PCI adapter that connects your
computer to an Ethernet or Fast Ethernet network.
•
Ethernet PC Card — The Ethernet PC Card is a credit card-sized Ethernet/Fast Ethernet adapter
that you can use to connect a laptop PC to an Ethernet network.
•
Ethernet USB Adapter — The Ethernet USB Adapter provides plug-and-play local area network
(LAN) connections for devices that use a USB port, such as USB-enabled PCs, laptops, and hubs.
•
Internal Phoneline Adapter — The Internal Phoneline Adapter allows you to build a network using
standard home telephone lines.
•
Phoneline PC Card — The Phoneline PC Card allows you to build a network using standard home
telephone lines.
•
PC Port — The PC Port is an adapter that you can use to connect a telephone line to your computer
using one of the USB ports located on your machine.
•
Internal Wireless Adapter — The Internal Wireless Adapter is a standard PC Card-to-PCI bus
adapter that you can use to install PC cards into computers that do not have a factory-installed PC
Card slot.
•
Wireless PC Card — The Wireless PC Card is a wireless network card that fits into any standard
PC Card Type II slot.
•
Wireless USB Adapter — The Wireless USB Adapter is a wireless networking device that is
connected to a USB port on your computer using a USB cable.
•
5-Port Ethernet Switch —The 5-Port Ethernet Switch is a networking device that allows you to
connect up to five PCs or laptops using Ethernet or Fast Ethernet to form a local area network
(LAN).
•
4-Port USB Hub — The 4-Port USB Hub is a simple, external plug and play device that allows
you to connect a variety of products that have a USB interface to your computer.
Finding Information in this Guide
This installation guide is divided into the following chapters:
•
“Hardware Installation Instructions,” which contains all the information you need to install your
networking hardware.
•
“Installing Drivers for Windows 98SE,” which contains instructions for installing the software
drivers if you are running the Windows 98SE operating system.
iii
•
“Installing Drivers for Windows ME,” which contains instructions for installing the software
drivers if you are running the Windows ME operating system.
•
“Installing Drivers for Windows 2000,” which contains instructions for installing the software
drivers if you are running the Windows 2000 operating system.
•
“Installing Drivers for Windows XP,” which contains instructions for installing the software
drivers if you are running the Windows XP operating system.
•
“Installing Drivers for the Mac OS,” which contains instructions for installing the software drivers
if you are running the Macintosh operating system.
•
“Troubleshooting Tips,” which contains troubleshooting information for your installation.
To quickly locate the information you need to install the software for your adapter card, you can use the
following table. Find the device you have in the left column, and the operating system that you are running
in the top row, and you will see the page number for your device driver installation information in the
appropriate box.
Driver Installation Locater
Device
Windows 98SE
Windows ME
Windows 2000
Windows XP
Mac OS
Ethernet Internal Card
page 8
page 11
page 13
page 16
Not supported
Ethernet PC Card
page 8
page 11
page 13
page 17
page 24
Ethernet USB Adapter
page 8
page 11
page 13
page 17
Not supported
Internal Phoneline Adapter
page 8
page 11
page 13
page 16
Not supported
Phoneline PC Card
page 8
page 11
page 13
page 16
Not supported
PC Port adapter
page 8
page 11
page 13
page 17
page 20
Internal Wireless Adapter
page 8
page 11
page 13
page 16
Not supported
Wireless PC Card
page 8
page 11
page 13
page 18
Not supported
Wireless USB Adapter
page 8
page 11
page 13
page 18
Not supported
5-Port Ethernet Switch
NA
NA
NA
NA
NA
4 Port USB Hub
NA
NA
NA
NA
NA
iv
Hardware Installation Instructions
This chapter describes how to install your adapter card and other networking devices. It contains the
installation details for the following devices:
•
•
•
•
Ethernet PC Card
•
Phoneline PC Card
•
Wireless PC Card
•
•
•
PC Port Adapter
•
•
4-Port USB Hub
Installing PCI cards
This section describes how to install the following PCI adapters:
•
Ethernet Internal Card: Fast Ethernet is a network technology that extends traditional 10 Mbps
Ethernet technology to achieve 100 Mbps transmission and reception. Your Wireless USB Adapter
gives you the ability to share information and resources, such as files and printers, and take full
advantage of a connected environment for work and play.
•
Internal Phoneline Adapter: This adapter allows you to build a network using standard home
telephone lines. Using the Internal Phoneline Adapter, you do not need to install separate hardware
or special cables.
•
Internal Wireless Adapter: This adapter is a standard PC Card-to-PCI bus adapter that you can
use to install PC cards into computers that do not have a factory-installed PC Card slot. After you
install the Internal Wireless Adapter in your computer, you can then insert a standard PC Card into
the adapter and configure the PC Card for use.
Note: To avoid static electric charges, touch an unpainted screw to the outside of the power supply before
installing or working with the adapter.
1
To install your PCI adapter, follow these steps:
1. Power off the computer and unplug the power cord.
2. Remove the outer cover of your computer and locate an available PCI slot.
3. Remove the backplate (the small piece of metal that covers the opening for the PCI card on the back
cover that you just removed).
4. Insert the PCI adapter into the PCI slot.
5. Secure the adapter with the screw from the
backplate and replace the cover of your
computer.
6. If necessary, use the supplied network cable
to connect the adapter to your network
hardware.
Installing PCMCIA cards
This section describes how to install the following PCMCIA cards:
•
Ethernet PC Card: A credit card-sized Ethernet/Fast Ethernet adapter that you can use to connect
a laptop PC to an Ethernet network.
•
Phoneline PC Card: Allows you to build a network using standard home telephone lines. Using
the Phoneline PC Card, you do not need to install separate hardware or special cables.
•
Wireless PC Card: A wireless network card that fits into any standard PC Card Type II slot. A
standard Ethernet card requires a cable connection to a hub or a patch panel. Using the Wireless
PC Card, you have the same connectivity without the wires. Expanding or redesigning your
network is easy, and unlike cabled Ethernet, the Wireless PC Card allows you to roam throughout
the network while remaining connected to the LAN.
To install your PCMCIA adapter card, follow these steps:
1. Power off the computer.
2. Gently insert the front end of the PC card into the
Cardbus PC slot on your laptop, until it is firmly
seated. (If you have a desktop computer, you must
use an internal wireless adapter in order to insert
the Wireless PC Card.)
Installing USB Adapters
This section describes how to install the following USB Adapters:
•
Ethernet USB Adapter: Provides plug-and-play local area network (LAN) connections for
devices that use a USB port, such as USB-enabled PCs, laptops, and hubs.The Ethernet USB
Adapter connects to a USB host and comes with an RJ-45 port that is used to connect to an
2
Ethernet or Fast Ethernet LAN. Using the Ethernet USB Adapter, you can share files and printers
with other network users.
•
Wireless USB Adapter: A wireless networking device that is connected to a USB port on your
computer using a USB cable. Using the Wireless USB Adapter, you can communicate with one or
more computers that are equipped with wireless adapters. Where a standard Ethernet card requires
a cable connection to a hub or a patch panel, wireless networking provides the same connectivity
without the wires. Expanding or redesigning your network is easy, and unlike cabled Ethernet, the
Wireless USB Adapter allows users to roam throughout the network while remaining connected to
the LAN.
The supplied USB cable has a different type of USB connector on each end.
Series A connector. The Series A USB connector plugs into the USB port on your computer.
Series B connector. The Series B USB connector plugs into the back of your USB device, such
as the port located on the back of your USB hub.
To install the Wireless USB Adapter, simply connect the adapter to an available USB port on your
computer using the supplied USB cable.
Installing the PC Port Adapter
The PC Port is an adapter that enables you to connect a telephone line to your computer using a USB port
on your system.
Box Contents
Verify that your PC Port adapter box contains these items:
•
Y-adapter
•
Telephone cable (6 ft.)
•
2Wire PC Port
Installing the PC Port adapter on a Windows PC
1. Power off your computer.
2. Insert the PC Port adapter into an available
USB port on your computer.
3. Connect one end of the supplied telephone
cable to the PC Port adapter and the other end
of the telephone cable to an available wall
jack.
Note: You may have more than one phone line in
your home. Your networked computers and
devices must be connected to the same phone line
in order to be on the same network.
3
Installing the PC Port adapter on a Macintosh Computer
1. Power off your computer..
2. Insert the PC Port adapter into an available
USB port on your computer. You can use any
USB port except the keyboard port on the
iMac
3. Connect one end of the supplied telephone
cable to the PC Port adapter and the other end
of the telephone cable to an available wall
jack.
Installing the 5-Port Ethernet Switch
The 5-Port Ethernet Switch is a networking device that allows you to connect up to five PCs or laptops
using Ethernet or Fast Ethernet to form a local area network (LAN). The 5-Port Ethernet Switch acts as a
high-speed selective bridge between your LAN devices.
Before You Install the 5-Port Ethernet Switch
Before you install the switch, make sure you provide proper ventilation around the switch so that heat can
dissipate easily. Do not place heavy objects on the switch.
Identifying the Ports
The ports are located on the rear panel of the switch, as shown in the following figure:
The following table describes the ports on the switch.
Port
Description
DC Power Jack
Use this port to plug in the switch using the supplied external AC power adapter.
Auto-MDI Jacks
Use these ports to connect Ethernet devices (such as PCs equipped with an Ethernet
adapter) to your network.
4
Installing the 5-Port Ethernet Switch
Follow these steps to install the 5-Port Ethernet Switch:
1. Insert the supplied power adapter into the DC power jack of the switch and plug the cable into an
electrical outlet.
2. To connect a PC to the switch, use a two-pair Category 3, 4, or 5 unshielded or shielded twisted pair
cable. Connect one end of the cable to your PC. Connect the other end of the cable to one of the five
Auto-MDI jacks located on the back of the switch.
Note: If you are using Fast Ethernet, you must use a Category 5 cable.
Identifying the LED Indicators
The LED indicators are located on the front panel of the switch, as shown in the following figure:
The following table describes the LED indicators.
LED
Description
Power
Steady green indicates the switch is powered on.
Link/Act
Steady green indicates the port is connected to a LAN device.
Blinking green indicates the port is sending or receiving data on the LAN.
100M
Steady green indicates the port is connected to a Fast Ethernet device.
Off indicates the port is connected to an Ethernet device.
FDX/COL
Steady green indicates the port is in full-duplex (FDX) mode.
Blinking green indicates the port is experiencing collisions.
Installing the 4-Port USB Hub
The 4-Port USB Hub is an external plug-and-play device that allows you to connect a variety of products
that have a USB interface to your computer. These products include computer monitors, printers, digital
speakers, modems, digital cameras, joysticks, and multimedia equipment.
Box Contents
Verify that your 4-Port USB Hub box contains the following items:
•
1 4-Port USB Hub
•
1 USB cable
•
1 power adapter
5
Installation
The supplied USB cable has a different type of USB connector on each end.
Series A connector. The Series A USB connector plugs into the USB port on your computer.
Series B connector. The Series B USB connector plugs into the back of your USB device, such
as the port located on the back of your USB hub.
Installing the 4-Port USB Hub
Follow these steps to install the 4-Port USB Hub:
1. Insert the supplied power adapter into the power jack of the hub and plug the cable into an electrical
outlet.
2. Connect the Series A connector of the supplied USB cable to the USB port located on your computer.
3. Connect the Series B connector of the supplied USB cable to the open port on the back of the 4-Port
USB Hub.
4. Connect Series A connectors of your USB devices (such as a mouse or a keyboard) into any of the
available ports on the front of the hub.
6
The following illustration shows the 4-Port USB Hub connected to four USB devices.
7
Installing Drivers for Windows 98SE
This chapter describes how to install the Windows 98SE software drivers for the following devices:
•
•
Ethernet PC Card
•
•
PC Port Adapter
•
•
Phoneline PC Card
•
•
Wireless PC Card
•
For information on how to install the adapter hardware, see the appropriate section in the “Hardware
Installation Instructions” chapter of this guide.
Installing the Drivers
1. Power on your computer. The Add New
Hardware Wizard opens. Click Next to
continue.
8
2. When the next window opens, select Search
for a better driver for your device
(Recommended), and click Next.
3. Insert the 2Wire Setup Wizard CD into your
CD-ROM drive, deselect the Floppy disk
drives checkbox, select the CD-ROM drive
checkbox, and click Next.
4. Windows locates the best driver for your
device. Click Next to continue.
9
5. After the drivers are copied, the Add New
Hardware Wizard displays the adapter card
appropriate to your installation. Click Finish.
6. When the System Setting Change window
opens, click Yes to reboot your computer and
complete the installation.
10
Installing Drivers for Windows ME
This chapter describes how to install the Windows ME software drivers for the following devices:
•
•
Ethernet PC Card
•
•
Phoneline PC Card
•
PC Port Adapter
•
•
Wireless PC Card
•
Note: For the Internal Phoneline Adapter, once you install the hardware and power on your computer,
the drivers are automatically installed. You need only reboot your computer to complete the installation.
1. Power on your computer and insert the 2Wire
Setup Wizard CD into your CD-ROM drive.
2. When the Add New Hardware Wizard
window opens, select Automatic search for a
better driver (Recommended).
3. Click Next.
11
4. After the driver files are copied, the Add New
Hardware Wizard displays the adapter card
appropriate to your installation. Click Finish.
5. When the System Settings Change window
opens, click Yes to reboot your computer and
complete the installation.
12
Installing Drivers for Windows 2000
This chapter describes how to install the Windows 2000 software drivers for the following devices:
•
•
Ethernet PC Card
•
•
PC Port Adapter
•
•
Phoneline PC Card
•
Wireless PC Card
•
Note: For the Internal Wireless Adapter, once you install the hardware and power on your computer, the
drivers are automatically installed.
1. Power on your computer and insert the 2Wire
Setup Wizard CD into your CD-ROM drive.
2. When the Found New Hardware Wizard
window opens, click Next to continue.
13
1. The next window prompts you to install
device drivers.
2. Select Search for a suitable driver for my
device (recommended), and click Next.
3. When the Locate Driver Files window opens,
deselect the Floppy disk drives checkbox,
select the CD-ROM checkbox.
4. Click Next.
5. The Driver Files Search Results window
opens. Click Next.
14
6. The next window prompts you to complete the
installation. Click Finish to complete the
installation.
15
Installing Drivers for Windows XP
This chapter contains instructions for installing the software drivers for the following adapter cards using
Windows XP:
•
•
Ethernet PC Card
•
•
•
Phoneline PC Card
•
PC Port Adapter
•
•
Wireless PC Card
•
Activating Drivers for Adapters with Built-in Drivers
This section contains instructions for activating the drivers for the following adapters:
•
•
•
Phoneline PC Card
•
Windows XP ships with drivers for the adapters listed above. To activate the drivers for one of these
adapters, follow these steps:
1. Install the adapter hardware, as described in the appropriate section of this guide.
2. Power on your computer.
3. The built-in drivers for the adapter are automatically located and the adapter is installed.
16
Installing Drivers for the Ethernet PC, Ethernet USB, and PC Port
Adapters
This section describes how to install the software drivers for the following adapters:
•
Ethernet PC Card
•
•
PC Port Adapter
1. Install the adapter hardware, as described in
the appropriate section of this guide. Power
on your computer and insert the 2Wire Setup
Wizard CD into your CD-ROM drive.
window opens, make sure that Install the
software automatically (Recommended)
is selected and click Next to continue.
3. Click Finish to complete the installation.
17
Installing Drivers for the Wireless PC Card and USB Adapter
This section describes how to install the software drivers for the following adapters:
•
Wireless PC Card
•
1. Power on your computer and insert the 2Wire Setup Wizard CD into your CD-ROM drive.
window opens, select Install the software
automatically (Recommended) and click
Next to continue.
3. The driver installs.
18
4.
Click Finish to complete the installation.
19
Installing Drivers for the Mac OS
This chapter describes how to install the Mac OS software drivers for the PC Port adapter and the Ethernet
PC Card.
Installing the Drivers for the PC Port Adapter
The following instructions describe the driver installation for Macintosh OS 8.6 to 9.x and Macintosh OS
10.1.3.
Installing the Drivers for MacOS 8.6 to 9.x
2. Mac OS recognizes the PC Port and asks if
you would like to load the driver over the
Internet. Click Cancel to continue.
3. Insert the 2Wire PC Port CD.
Select 2Wire USB 1.2.23 from the CD and
click Continue.
20
4. Accept or decline the License Agreement.
Click Accept to continue your PC Port
installation. Selecting Decline will end your
installation.
5. Select Easy Install.
Verify that Easy Install is selected in the
2Wire USB 1.2.23 window. If it is not, select
it from the pull-down menu.
6. Restart your computer.
Your PC Port installation is complete. Click
Restart to load the PC Port settings.
7. Establish your PC Port connection.
From the Apple menu, select Control Panel,
then TCP/IP. Set the Connect via field to
2Wire PC Port and close the window. In the
Configure field, ensure that Using DHCP
Server is selected. If it is not, select it from the
pull-down menu and close the window. If the
Save changes window displays, click Save to
complete your installation.
21
Installing the Drivers for MacOS 10.1.3 or higher
2. If you have set up an administrator name and
password, the Authenticate screen opens.
Enter your administrator name and password
and click OK.
3. Insert the 2Wire PC Port CD.
Select 2Wire USB 1.2.23 from the CD and
click Continue.
4. Accept or decline the License Agreement.
Click Accept to continue your PC Port
installation. Selecting Decline will end your
installation.
5. Select Easy Install.
Verify that Easy Install is selected in the
2Wire USB 1.2.23 window. If it is not, select
it from the pull-down menu.
22
Your PC Port installation is complete. Click
Restart to load the PC Port settings.
7. Establish your PC Port connection.
From the Apple menu, select System
Preferences, then click Network. Verify that
Ethernet Adaptor (en1) is selected in the Show
field. If it is not, select it from the pull-down
menu. When the New Port Detected message
displays, click OK.
8. Click Save to complete your installation.
23
Installing the Drivers for the Ethernet PC Card
2. Locate the DFE-690TXD folder, and double-
click the Installer icon.
3. Click Install.
4. When the driver is successfully installed, the
following message displays. Click Ok to
restart your computer.
5. From the Apple menu, select Control Panel,
then TCP/IP.
6. From the Connect via pull-down, select
Ethernet slot D-Link.
7. Run the 2Wire Setup Wizard software.
24
Troubleshooting Tips
This section provides troubleshooting tips for adapters.
PCI Adapters
PCI adapters include these models:
•
•
•
Due to a fault in some Plug-n-Play BIOS programs, occasionally a newly installed adapter is assigned an
interrupt number that is already assigned to another device. In such a case, the conflict of interrupt number
causes faults in the behavior of both devices. To correct this problem, run the CMOS Setup utility and
manually assign a non-conflicting interrupt number.
Windows ME installs default drivers for the device during the Plug-n-Play installation. These drivers are
old and may cause some networking problems (specifically with performance). You may or may not notice
any problems. If you experience problems with the Internal Phoneline Adapter running under Windows
ME, try updating the default Windows ME drivers for the adapter with the one supplied on the 2Wire
Setup Wizard CD-ROM. To update the drivers, go to Device Manager>Network Adapters, highlight the
Internal Phoneline Adapter, and select Properties to update the driver from the root of the 2Wire Setup
Wizard CD-ROM.
You might see problems using the Internal Wireless Adapter under Windows 2000. The device and drivers
install properly. However, after you install the Wireless PC Card, the adapter fails to obtain a DHCP IP
address. To correct this problem, you must first install the Windows 2000 Service Pack 1 or later (the
Windows 2000 Service Pack 2 is included on the 2WireSetup Wizard CD-ROM). Next, run the
lucentwk2.reg file, also located on the 2Wire Setup Wizard CD-ROM in the \Orinoco Wireless
\Utils directory. Finally, reboot your computer.
25
Windows PCs
If the adapter indicator lights are not lit, the adapter
or adapter driver may not be properly installed. To
verify that the adapter or adapter driver is properly
installed, check the Windows Device Manager. The
following screen capture shows a 2Wire PC Port in
the Network adapters list.
If the adapter or adapter driver is not installed
properly, the device will display with a red X or a
question mark, as shown in the following screen
capture.
Follow these steps:
1. Unplug the adapter.
2. Uninstall the adapter drivers.
4. Reinstall the adapter and adapter driver.
5. Verify that the adapter is receiving a valid IP address.
Verifying IP Address for Windows 95, 98, and ME
To verify that the adapter is receiving a valid IP address:
1. Click the Start button.
2. Select Run.
3. Enter “winipcfg.”
A dialog box opens.
4. Select the adapter, and verify that the IP address is 172.16.1.x, 10.0.1.x, or 192.168.1.x. If one of these
addresses does not display, click Release and then Renew.
Verifying IP Address for Windows NT, 2000, and XP
To verify that the adapter is receiving a valid IP address:
1. Click the Start button.
2. Select Run.
3. Enter “ipconfig.”
4. Select the adapter, and verify that the IP address is 172.16.1.x, 10.0.1.x, or 192.168.1.x. If one of these
addresses does not display, enter “ipconfig/release” and then “ipconfig/renew.”
26
Index
Numerics
4-Port USB Hub
box contents, 5
installing, 5, 6
with devices connected, 7
identifying ports, 4
identifying the LED indicators, 5
installing, 4
B
box contents
4-Port USB Hub, 5
PC Port Adapter, 3
E
Ethernet Internal Card, installing, 1
Ethernet PC Card, installing, 2
Ethernet USB Adapter, installing, 2
H
hardware installation, 1
I
installation
4-Port USB Hub, 5, 6
5-Port Ethernet Switch, 4
Ethernet Internal Card, 1
Ethernet PC Card, 2
Ethernet USB Adapter, 2
hardware, 1
Internal Phoneline Adapter, 1
Internal Wireless Adapter, 1
Mac OS drivers, 20
PC Port Adapter, 3
PC Port Adapter on a Macintosh, 4
PC Port Adapter on a Windows PC, 3
PCI cards, 1
PCMCIA cards, 2
Phoneline PC Card, 2
USB adapters, 2
Windows 2000 drivers, 13
Windows ME drivers, 11
Windows SE drivers, 8
Windows XP drivers, 16
Windows XP Ethernet PC drivers, 17
Windows XP Ethernet USB drivers, 17
Windows XP PC Port Adapter drivers, 17
Windows XP Wireless PC Card drivers, 18
Windows XP Wireless USB drivers, 18
Wireless PC Card, 2
Wireless USB Adapter, 3
installing, 1
troubleshooting, 23
installing, 1
troubleshooting, 23
M
Mac OS drivers, installation, 20
P
PC Port Adapter
box contents, 3
installing, 3
installing on a Macintosh, 4
installing on a Windows PC, 3
PCI adapters, troubleshooting, 23
PCI cards, installing, 1
PCMCIA cards, installing, 2
Phoneline PC Card, installing, 2
Index-27
T
troubleshooting
Internal Phoneline Adapter, 23
Internal Wireless Adapter, 23
PCI adapters, 23
tips, 23
U
USB adapters, installing, 2
W
Windows 2000 driver installation, 13
Windows ME driver installation, 11
Windows SE driver installation, 8
Windows XP drivers
activating built-in, 16
Ethernet PC, 17
Ethernet USB, 17
installation, 16
PC Port Adapter, 17
Wireless PC Card, 18
Wireless USB Adapter, 18
Wireless PC Card, installing, 2
Wireless USB Adapter, installing, 3
Index-28
5100-000036-002 Rev B

Third-Party Adapter

Transcription

Similar documents

Kensington® VM4000 4K Video Adapter Mini DP

wireless 150n usb adapter quick install guide

- HomeSpot

WIRELESS 150N USB MINI ADAPTER QUICK INSTALL

Installation Guide

GV650 V7.05 Installing Guide

3.5" SATA to USB 3.0 External Hard Drive Enclosure

Heathkit DX-100 “Official” Modifications and Other Info

TURN YOUR PANASONIC AG-AF101 or AG-AF100 INTO

KE8220 Quick Start Guide