royce router bit

SATISFACTION GUARANTEED
Limited Warranty
Custom Items
All items in the Royce//Ayr catalogue, unless otherwise
noted, are warranted for 90 days against defects in
workmanship and materials. Normal wear and tear or
use of a tool for other than the intended purpose is not
covered by this warranty. Merchandise may be returned
to Royce//Ayr Cutting Tools for repair or replacement at
our option. Royce//Ayr liability is limited to repair or
replacement of the merchandise. In no event shall
Royce//Ayr be liable for any incidental or consequential
damages.
Custom items are those that are made to our customer’s specifications and are not normally carried by
Royce//Ayr or the manufacturer. The customer is
responsible to make sure his specifications meet his
needs. These items cannot be returned unless there is
a defect in workmanship or materials.
Special Items
No Sale is Final
If you have a problem with an order you placed with
Royce//Ayr, please call. We want you to be satisfied
with our products and service.
Special items are those not in the Royce//Ayr catalogue
and are special ordered for the customer. These items
are covered by our limited warranty. If a special item is
defective, it is covered like any other catalogue item.
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Table of Contents
Page #
Beading Bits
...............................................................15,
Ball Bearings & Spare Parts
23, 28, 29
.................41,
42, 43
Page #
Mortising Bits
..........................................................................................6,
Moulding Bits
.................................................................................33,
Multi-Profile Bits
Bevel Trim Bits
Ogee Bits (Roman, Filet)
Bevel Trim Bits (Solid Carbide)
Bottom Cleaning Bits
9
..............................10
...................................................................17
Bull Nose Bits
Rabbeting Bits
Canoe Bits
20, 33
..........................................................................................................19
Chamfer Bits
....................................................................................................9
Classical Bits
.......................................................................20,
Convex Beading Bits
21, 24
.........................................................15,
Core Box (Round Nose) Bits
Corner Rounding Bits
...................................14,
28
15
................................................................19
Cove Bits ........................................................................................................15, 19
Crown Moulding Bits
..................................................................34
Door Lip Bits
................................................................................................22
Dovetail Bits
..................................................................................................13
Edge Forming Bits
.....................................................30,
Engraving Bits (Solid Carbide)
Fancy Moulding Bits
Finger Grip Bits
31, 32
.................................14
...................................................................30
.....................................................................................23
Finger Joint Bit .........................................................................................12
Flush Trim Bits (Straight & Upshear)
Flush Trim Bits (Solid Carbide)
..........8
.............................10
Rabbeting Bits (Sets)
......................................................................16
Rail & Stile Bits ...........................................................................26, 27
...........................................24,
25, 26, 27
Rip & Slotter Bit (Solid Carbide)
..........................10
Raised Panel Bits
Rounding Over Bits
Slot Mortising Bits
Slotting Cutters
.............................................................18,
........................................................................................12
Slotting Cutter Set (Multipurpose)
....................12
Straight Bits
4, 5, 6, 7
......................................................................3,
Straight Bits (Shear Bits)
................................................5,
Straight Bits (Staggered Tooth)
Straight Bits (Compression)
Tee/Bumper Moulding Bits
Thumb Nail Bits
...............................................6
.............................7
...............................................10
.....................................................................................17
Tongue & Groove Bits
Traditional Bits
.................................................................28
....................................................................................23
Trim Cutter Assemblies
............................................................9
...............................................................................................................11
...........................................10
Handrail Bits ...................................................................................34, 35
V-Grooving Bits
Helix Laminate Trim Bits
V-Groove & Scorer (Solid Carbide)
.....................................................................................................11
Laminate Overhang Trim Bits
Leaf Edge Bits
..............................................................................13,
14
.....................10
Wavy Edge Bits...........................................................................................21
..................................10
...........................................................................................29
Locking Joint Bits
Mitre Lock Bits
6
..................................6
Straight Bits (with Boring Point)
Veining Bits (Solid Carbide)
Keyhole Bits
22
................................................................................7
T-Slot Bits
.....................................................8
22
...........................................................................................16
Glue Joint Bits (Bevel & Spline)
17
..............................23
..................................................................................21,
Flush Trim Bits (V-Groove) ..................................................13
...................16,
21,22, 23, 24
...........................................................................................11
Panel Pilot Bits
Panelling Bits
......................................................................19,
............20,
Outer Edge Door Trimmer Bits
Box Joint Bit Set ......................................................................................12
34
.................................................................................32
Ball Grooving Bits .................................................................................15
...................................................................................8,
7
...............................................................................17
Solid Surface Bits ...........................................36, 37, 38, 39
...........................................................................................17
Turnover Knife Router Bits ............................................40
Router Bit Illustrations (page #)
8
8
14
14
15
11
16
8
9
15
15
3
28
28
23
24
28
22
3
29
22
5
5
9
24
29
4
18
20
23
21
22
13
10
5
6
7
3
29
3
6
21
19
6
34
6
8
22
25
4
10
22
24
32
13
19
18
17
11
16
16
13
8
9
17
18
24
24
1
8
12
12
12
16
13
9
33
19
23
14
14
14
12
19
20
20
18
29
20
22
22
21
25
21
20
29
24
22
20
20
21
9
26
27
27
26
3
26
28
16
17
19
33
31
33
34
43
34
33
35
23
33
31
34
34
32
29
35
43
31
34
15
28
23
11
33
321
29
33
15
34
15
27
44
11
32
31
35
23
23
31
30
31
30
35
35
17
30
31
17
17
30
30
30
32
30
30
17
27
45
45
2
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
T wo Flutes Continued
Part
Number
Straight Bits, 1/4" Shank, 1 Flute
Part
Number
LR88000A*
LR88000*
LR88001*
LR88002*
LR88006*
LR88008
LR88012*
LR88016*
LR88020*
LR88024
LR88026
LR88028
LR88030
LR88032
LR88034
LR88036
LR88038
Cutting
Dia
Cutting
Length
Shank
Dia
1/16"
1/8"
5/32"
3/16"
7/32"
1/4"
1/4"
1/4"
1/4"
9/32"
5/16"
3/8"
3/8"
1/2"
1/2"
5/8"
3/4"
3/16"
7/16"
7/16"
7/16"
3/4"
1/2"
3/4"
1"
1"
3/4"
1"
3/4"
1"
3/4"
1"
3/4"
3/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
Overall
Length
1-7/8"
2"
2"
2"
2"
2"
2"
2-1/4"
2-7/8"
2"
2-1/4"
1-15/16"
2-3/8"
1-3/4"
2-1/8"
1-15/16"
1-3/4"
LR88138*
LR88140
LR88142
LR88144
LR88146
LR88148
LR88150
LR88152
LR88154
LR88155
LR88156
LR88157
LR88158
LR88159
LR88160
LR88162
LR88164
LR88166
Cutting
Dia
Cutting
Length
Shank
Dia
3/8"
7/16"
7/16"
1/2"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
11/16"
11/16"
3/4"
3/4"
13/16"
7/8"
15/16"
1"
1-1/4"
3/4"
1"
3/4"
1"
1-1/4"
3/4"
1"
3/4"
1"
3/4"
1"
3/4"
1"
3/4"
3/4"
3/4"
3/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
Overall
Length
2-1/2"
2"
2-1/8"
2"
2-1/8"
2-1/2"
2-1/8"
2-1/2"
2"
2-1/4"
2"
2-1/4"
2"
2-1/4"
2"
2"
2"
2"
Straight Bits “Metric”, 1/4" Shank, 2 Flutes
Part
Number
Straight Bits, 1/4" Shank, 2 Flutes
Part
Number
LR88096
LR88098
LR88100L*
LR88100*
LR88102*
LR88104*
LR88105*
LR88106
LR88108
LR88110*
LR88112*
LR88116*
LR88120
LR88122*
LR88124
LR88128*
LR88134
LR88136
3
Cutting
Dia
Cutting
Length
Shank
Dia
1/16"
3/32"
1/8"
1/8"
5/32"
3/16"
3/16"
7/32"
1/4"
1/4"
1/4"
1/4"
9/32"
9/32"
5/16"
5/16"
3/8"
3/8"
3/16"
1/4"
7/16"
5/16"
7/16"
7/16"
5/8"
3/4"
1/2"
3/4"
1"
1"
3/4"
1"
3/4"
1"
3/4"
1"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
Overall
Length
1-7/8"
1-7/8"
2"
2-3/16"
2"
2"
2-1/8"
1-7/8"
2"
2"
2-1/4"
2-7/8"
2"
2-1/4"
2"
2-1/4"
2"
2-1/4"
LR88168*
LR88170*
LR88172*
LR88174*
LR88176
LR88178
LR88180*
LR88182
LR88184
LR88186
LR88188
LR88190
LR88192
LR88194
LR88196
LR88198
LR88200
LR88202
LR88204
LR88206
LR88208
LR88210
LR88212
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
3mm
4mm
5mm
6mm
7mm
8mm
8mm
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
16mm
17mm
18mm
19mm
20mm
21mm
22mm
25mm
7/16"
7/16"
7/16"
3/4"
3/4"
3/4"
1"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1-1/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1-9/16"
2"
2"
2"
2"
2"
2-1/4"
2"
2"
2"
2"
2"
2"
2"
2"
2-1/4"
2"
2"
2"
2"
2"
2"
2"
* NOT GUARANTEED DUE TO EXTREME LENGTH AND/OR FRAGILITY
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
One Flute Continued
Part
Number
Straight Bits, 3/8" Shank, 1 Flute
Part
Number
LR88300*
LR88310
LR88312*
Cutting
Dia
Cutting
Length
Shank
Dia
1/4"
3/8"
3/8"
3/4"
1"
1-1/4"
3/8"
3/8"
3/8"
Overall
Length
LR88416*
LR88420
LR88422
LR88424
LR88426
LR88428*
LR88432
LR88421
LR88423
Cutting
Dia
Cutting
Length
Shank
Dia
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
9/16"
5/8"
1-1/4"
1"
1-1/4"
1-1/4"
1-1/2"
2"
2-1/4"
1-1/4"
1-1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
Overall
Length
2-3/4"
2-1/2"
2-7/8"
3-3/8"
3-1/8"
4-1/4"
4-1/4"
2-7/8"
2-7/8"
2-1/4"
2-11/16"
2-5/8"
Straight Bits, 1/2" Shank, 2 Flutes
Straight Bits, 3/8" Shank, 2 Flutes
Part
Number
LR88314*
LR88316*
LR88317*
LR88320*
LR88324*
LR88326
LR88328
LR88330*
LR88332*
LR88336
LR88340
LR88342
LR88346
LR88350
LR88352
LR88354
Cutting
Dia
Cutting
Length
Shank
Dia
1/8"
5/32"
3/16"
1/4"
5/16"
3/8"
3/8"
3/8"
3/8"
7/16"
1/2"
1/2"
5/8"
13/16"
7/8"
1"
7/16"
7/16"
7/16"
3/4"
1"
3/4"
1"
1-1/4"
1-1/4"
1"
1"
1-1/4"
3/4"
3/4"
3/4"
3/4"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
Overall
Length
2"
2"
2"
2-1/4"
2-1/2"
2-1/4"
2-1/2"
2-3/4"
3-3/8"
2-1/2"
2-1/2"
2-1/2"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
Straight Bits, 1/2" Shank, 1 Flute
Part
Number
LR88400*
LR88404*
LR88408*
LR88414
Cutting
Dia
Cutting
Length
Shank
Dia
1/4"
1/4"
5/16"
3/8"
3/4"
1"
1"
1"
1/2"
1/2"
1/2"
1/2"
Overall
Length
2-1/2"
2-1/2"
2-3/4"
2-1/2"
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR88497
LR88498
LR88500*
LR88500L*
LR88504
LR88506*
LR88516
LR88518
LR88520*
LR88524
LR88528
LR88530
LR88532
LR88534
LR88536
LR88542
LR88544
LR88548*
LR88550*
LR88558
LR88560
LR88562
LR88564
LR88568
LR88570
LR88572
LR88578
LR88582
LR88584
LR88588
LR88590
LR88592
LR88594
LR88600
LR88602
LR88604
LR88606
15/64"
1/4"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
3/8"
13/32"
7/16"
7/16"
31/64"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
17/32"
9/16"
9/16"
5/8"
5/8"
5/8"
5/8"
21/32"
11/16"
23/32"
3/4"
3/4"
3/4"
3/4"
25/32"
13/16"
13/16"
7/8"
3/4"
1/2"
3/4"
1"
3/4"
1"
3/4"
1"
1-1/4"
1"
1"
1-1/4"
1"
1"
1-1/4"
1-1/2"
1-1/2"
2"
2-1/2"
1-1/4"
1"
1-1/4"
1"
1-1/4"
1-1/2"
2"
1-1/4"
1-1/4"
1-1/4"
1"
1-1/4"
1-1/2"
2"
1-1/4"
1"
1-1/4"
1"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
2-1/2"
2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
3"
2-3/4"
2-5/8"
3"
2-5/8"
2-5/8"
2-7/8"
3"
4-1/4"
4-1/4"
4-1/2"
2-7/8"
2-5/8"
2-7/8"
2-5/8"
2-7/8"
3"
3-5/8"
2-7/8"
2-7/8"
2-7/8"
2-5/8"
2-7/8"
3"
3-5/8"
2-7/8"
2-5/8"
2-7/8"
2-5/8"
* NOT GUARANTEED DUE TO EXTREME LENGTH AND/OR FRAGILITY
4
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
T wo Flutes Continued
T wo Flutes Continued
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR88610
LR88612
LR88614
LR88616
LR88618
LR88620
LR88622
LR88628
LR88624
LR88632
LR88636
LR88638
LR88640
LR88642
LR88644
LR88646
7/8"
15/16"
1"
1"
1"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
1-3/4"
1-7/8"
2"
1-1/4"
1-1/4"
1"
1-1/4"
1-1/2"
2"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
Overall
Length
2-7/8"
2-7/8"
2-5/8"
2-7/8"
3"
3-5/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
Part
Number
LR88654*
LR88656
LR88658
LR88660
LR88662*
LR88664
LR88668
LR88670
LR88672
LR88674
LR88676
LR88678
LR88680
LR88682
LR88684
LR88686
LR88688
LR88690
LR88692
LR88694
LR88696
LR88698
LR88700
Cutting
Dia
Cutting
Length
Shank
Dia
10mm
12mm
12mm
12mm
12mm
14mm
16mm
16mm
16mm
18mm
19mm
19mm
19mm
20mm
20mm
22mm
25mm
25mm
27mm
30mm
35mm
40mm
51mm
1-1/4"
1"
1-1/4"
1-1/2"
2"
1"
1"
1-1/4"
1-1/2"
1-1/4"
1"
1-1/4"
1-1/2"
1"
1-1/4"
1"
1-1/4"
1-1/2"
1-1/4"
1"
1"
1-1/4"
1-1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
Overall
Length
3"
2-5/8"
2-7/8"
3"
4-1/4"
2-5/8"
2-5/8"
2-7/8"
3-1/8"
2-7/8"
2-5/8"
2-7/8"
3-1/8"
2-5/8"
2-7/8"
2-5/8"
2-7/8"
3-1/8"
2-7/8"
2-5/8"
2-5/8"
2-7/8"
2-7/8"
Straight Bits, 1/2" Shank, “LH” 2 Flutes
Part
Number
LR88433
LR88434*
LR88435
LR88436
LR88437
LR88437A
LR88438*
LR88439
LR88440
LR88441
LR88442
LR88443
LR88444
LR88445
Cutting
Dia
Cutting
Length
Shank
Dia
5/16"
5/16"
3/8"
7/16"
1/2"
1/2"
1/2"
9/16"
5/8"
3/4"
3/4"
13/16"
7/8"
1"
3/4"
1"
1"
1-1/4"
1-1/4"
1-1/2"
2"
1-1/4"
1-1/4"
1-1/4"
2"
1-1/4"
1-1/4"
1-1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
Overall
Length
2-1/2"
2-3/4"
2-3/4"
3"
2-7/8"
3"
4-1/4"
2-7/8"
2-7/8"
2-7/8"
3-5/8"
2-7/8"
2-7/8"
2-7/8"
Down-Cut Shear Cut Straight Bits, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR88922
LR88926
LR88928
LR88930
3/8"
1/2"
1/2"
1/2"
1"
1-1/4"
1-1/2"
2"
1/2"
1/2"
1/2"
1/2"
Overall
Length
2-3/4"
2-7/8"
3-1/8"
4-1/4"
Up-Cut Shear Cut Straight Bits, 2 Flutes
Straight Bits “Metric”, 1/2" Shank, 2 Flutes
Part
Number
LR88648*
LR88650*
LR88652
5
Cutting
Dia
Cutting
Length
Shank
Dia
6mm
8mm
10mm
3/4"
1"
1"
1/2"
1/2"
1/2"
Overall
Length
2-1/2"
2-5/8"
2-1/2"
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR88932
LR88934
LR88936
LR88938
LR88940
LR88942
LR88944
3/8"
1/2"
1/2"
1/2"
1/2"
3/4"
1"
1"
1"
1-1/4"
1-1/2"
2"
1-1/4"
1-1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
Overall
Length
* NOT GUARANTEED DUE TO EXTREME LENGTH AND/OR FRAGILITY
2-3/4"
2-5/8"
2-7/8"
3-1/8"
4-1/4"
2-7/8"
2-7/8"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Straight Bits, 3/4" Shank, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR88708
LR88774
LR88779
3/4"
3/4"
1"
2"
2-1/2"
3"
3/4"
3/4"
3/4"
Overall
Length
4"
5"
5-1/8"
Stagger Tooth Straight Bits
Straight Bits, with Centre Bearing, 2 Flutes
Part
Cutting Cutting
Number
Dia
Length
1/2"
LR93067
LR93068
1/2"
LR93068B 1/2"
LR93068A 1/2"
5/8"
LR93069
LR93070
3/4"
LR93072
3/4"
LR93072B 3/4"
LR93072C 3/4"
LR93073A* 1"
1"
LR93073
LR93074 1-1/8"
LR93075 1-1/4"
LR93071 1-1/2"
1/4"
1"
1/2"
1-1/4"
1"
1"
1-1/4"
1"
2"
1"
1-3/4"
1-1/2"
1-3/4"
1-3/4"
Shank
Dia
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/2"
1/2"
3/8"
1/2"
1/2"
1/2"
1/2"
Overall
Length
2"
2-1/2"
2-1/4"
2-3/4"
2-1/2"
2-1/2"
2-3/4"
3"
3-5/8"
2-3/4"
3-3/4"
3-5/8"
4"
3-1/4"
Bearing
LR95004A
LR95004A
LR95004A
LR95004A
LR95005
LR95006
LR95006
LR95006C
LR95006C
LR95008E
LR95009
LR95009A
LR95008B
* BEARING NOT REPLACED
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR88801
LR88800
LR88802
LR88806
LR88808
LR88809
1/4"
3/8"
3/8"
1/2"
1/2"
1/2"
1"
1-3/8"
1-1/2"
1-3/4"
2-1/4"
2-1/4"
1/4"
3/8"
1/2"
1/2"
1/2"
1/2"
Overall
Length
2-1/4"
3"
3-1/8"
3-1/4"
4"
4-1/4"
Down Shear Straight Bits,
with Centre Bearing, 2 Flutes
Part
Cutting Cutting
Number
Dia
Length
LR93091
LR93092
LR93093
Compression Bits
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR88814
LR88815
3/4"
3/4"
2"
2"
1/2"
3/4"
3/4"
3/4"
3/4"
1-1/4"
1-1/2"
2"
Shank
Dia
Overall
Length
Bearing
1/2"
1/2"
1/2"
3-5/16"
3-1/2"
4"
LR95006
LR95006
LR95006
Overall
Length
4-1/4"
4-3/8"
Mortising Bits, 2 Flutes
rotated
180
Part
Number
Stagger Shear Tooth Bits
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR88811
LR88812
1/2"
1/2"
1-1/4"
2"
1/2"
1/2"
Overall
Length
3-1/8"
4-1/4"
LR89000
LR89002
LR89004
LR89005
LR89006
LR89006A
Cutting
Dia
Cutting
Length
Shank
Dia
1/2"
5/8"
3/4"
1"
1-1/4"
1-1/4"
3/4"
3/4"
3/4"
3/4"
1-1/4"
9/16"
1/4"
1/4"
1/4"
1/4"
1/2"
1/4"
Overall
Length
2"
2"
2"
2"
2-7/8"
2"
6
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
CHIP BREAKER BITS
Mortising Bits, 2 Flutes, Screw Type
Part
Number
Cutting
Dia
Cutting
Length
LR89007
LR89008
LR89009
LR89010
5/8"
3/4"
1"
1-1/4"
1/2"
1/2"
1/2"
5/8"
Thread
Hole
1/4
1/4
1/4
1/4
-
28
28
28
28
Thread
Thread
Thread
Thread
This type of router bit is ideal for cutting hardboard and
chipboard at high feed rates. Each flute is ground so
that chip breakers offset each other, giving a straight cut.
Any double flute router bit in this catalog can be ordered
as a Chip Breaker bit by writting the letters ”CB” after
the catalog number of that bit.
Replacement Shanks:
LR95106 = 1/4" Shank x 1/4 - 28 Thread
LR95108 = 1/2" Shank x 1/4 - 28 Thread
Reciprocating Slot Mortise Bits, 4 Flutes
Shank Diam = 13mm x 50mm
For Balestrini Machines
Bottom Carbide Straight Bits,
for Plunging, 1/4" Shank, 2 Flutes
Part
Number
Cutting
Dia
LR88124BP 5/16"
LR88134BP 3/8"
LR88136BP 3/8"
LR88144BP 1/2"
LR88146BP 1/2"
LR88154BP 5/8"
LR88162BP 7/8"
1"
LR88166BP
Cutting
Length
Shank
Dia
3/4"
3/4"
1"
3/4"
1"
3/4"
3/4"
3/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
Overall
Length
2"
2"
2-1/4"
2"
2-1/8"
2"
2"
2"
Bottom Carbide Straight Bits,
for Plunging, 1/2" Shank, 2 Flutes
Part
Number
LR88504BP
LR88520BP
LR88528BP
LR88534BP
LR88536BP
LR88544BP
LR88548BP
LR88568BP
LR88572BP
LR88588BP
LR88610BP
LR88614BP
LR88639BP
LR88642BP
LR88644BP
7
Cutting
Dia
Cutting
Length
Shank
Dia
5/16"
3/8"
7/16"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
7/8"
1"
1-5/8"
1-3/4"
1-7/8"
3/4"
1-1/4"
1"
1"
1-1/4"
1-1/2"
2"
1-1/4"
2"
1"
1-1/4"
1"
1"
1-1/4"
1-1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
Overall
Length
2-1/2"
3"
2-3/4"
2-5/8"
2-7/8"
3-1/8"
4-1/4"
2-7/8"
3-3/4"
2-5/8"
2-7/8"
2-5/8"
2-5/8"
2-7/8"
2-7/8"
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR89050
LR89052
LR89054
LR89056
LR89058
LR89060
LR89062
LR89064
LR89066
LR89068
LR89070
6mm
7mm
8mm
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
45mm
45mm
45mm
45mm
55mm
55mm
55mm
55mm
55mm
55mm
55mm
13mm
13mm
13mm
13mm
13mm
13mm
13mm
13mm
13mm
13mm
13mm
Overall
Length
100mm
100mm
100mm
100mm
110mm
110mm
110mm
110mm
110mm
110mm
110mm
Slot Mortise Bits, 3 Flutes
Shank Diam = 16mm x 50mm
For Bacci Machines (Right & Left Hand Rotations)
Part
Number
Cutting
Dia
Cutting
Length
LR89072
LR89076
LR89080
LR89084
LR89088
LR89092
LR89094
LR89096
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
55mm
55mm
55mm
55mm
60mm
60mm
60mm
60mm
Shank
Dia
Overall
Length
16mm
16mm
16mm
16mm
16mm
16mm
16mm
16mm
Add “L” to end of part number for LEFT HAND
110mm
110mm
110mm
110mm
115mm
115mm
115mm
115mm
rotation
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Helix Laminate Flush T rim Bits,
with Bearing, 2 Flutes
Part
Cutting Cutting Shank
Number
Dia
Length
Dia
Flush T rim Bits, with Bearing
Part
Cutting Cutting Shank
Number
Dia
Length
Dia
Overall
Length
Bearing
Double Flute
LR92998
LR92999
LR93000
LR93002
LR93004
LR93006
LR93008
LR93010
LR93012
LR93008L
LR93008X
LR93009
LR93007
LR93013
1/4"
1/4"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
3/4"
1"
1/2"
1"
1/2"
1"
1/2"
1"
1/2"
1-1/2"
1-1/2"
2"
1"
5/8"
1"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/2"
1/2"
1/4"
1/2"
1/2"
3/8"
1/4"
1/2"
2-1/2"
2"
2-5/8"
2-1/4"
2-5/8"
2-1/4"
3-1/4"
2-3/4"
3-3/8"
3-7/8"
4-1/4"
2-3/4"
2-1/4"
3"
LR95001
LR95001
LR95000
LR95000
LR95004
LR95004
LR95004
LR95004
LR95004
LR95004
LR95004
LR95004
LR95005B
LR95006
1"
1/2"
1"
1/2"
1-1/2"
1/2"
1/4"
1/4"
1/2"
1/2"
1/2"
1/4"
2-5/8"
2-1/4"
3-1/4"
2-3/4"
3-7/8"
2-1/4"
LR95004
LR95004
LR95004
LR95004
LR95004
LR95008F
Triple Flute
LR93050
LR93052
LR93054
LR93056
LR93058
LR93053
1/2"
1/2"
1/2"
1/2"
1/2"
7/8"
LR93202
LR93203
LR93199
LR93200
LR93201
LR93204
LR93205
1/2"
1/2"
5/8"
3/4"
3/4"
3/4"
3/4"
1"
1"
5/8"
5/8"
1"
1-1/2"
2"
1/4"
1/2"
1/4"
1/4"
1/4"
1/2"
1/2"
Overall
Length
Bearing
2-5/8"
3"
2-3/16"
2-3/8"
2-7/8"
4"
4-1/2"
LR95004
LR95004
LR95005
LR95006
LR95006
LR95006
LR95006
Bevel Bits, No Plunge, 2 Flutes
Part
Number
LR93082
LR93084
LR93088
LR93098
LR93099
Cutting
Dia
9/16"
1/2"
7/8"
1"
1-3/8"
Cutting
Length
Shank
Dia
5/8"
1/2"
3/8"
3/8"
3/8"
1/4"
1/4"
1/4"
1/4"
1/4"
Bevel
Overall
Length
1-3/4"
2"
1-5/8"
1-5/8"
1-5/8"
10
15
23
30
45
Deg
Deg
Deg
Deg
Deg
Combination: Bevel & Flush T rim Bits
Up-Shear Flush T rim Bits, with Bearing
Part
Cutting Cutting Shank
Number
Dia
Dia
Length
Overall
Length
Bearing
2-5/8"
4"
4-5/8"
LR95004
LR95006
LR95006
Double Flute
LR93020
LR93021
LR93022
1/2"
3/4"
3/4"
1"
1/2"
2"
1/4"
1/2"
1/2"
Part
Cutting Cutting Shank Overall
Number
Dia
Length
Dia
Length
Bevel
LR93408
LR93401
LR93404
LR93403
LR93400
23
23
23
30
45
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
# of
Wings
Deg
Deg
Deg
Deg
Deg
2
1
2
2
2
Flush T rim Bits, with Double Bearing
Part
Cutting
Number
Dia
Cutting Shank
Dia
Length
Overall
Length
Bearing
1-1/2"
2"
1/2"
1/2"
4-1/16"
4-1/2"
LR95004
LR95004
1-1/2"
1/2"
4-1/16"
LR95004
Bevel T rim Bit with Down Shear, 2 Flutes
Double Flute
LR93076
LR93078
1/2"
1/2"
Triple Flute
LR93080
1/2"
Part
Number
Cutting
Dia
LR93101
19/32"
Cutting Shank
Length
Dia
1/2"
1/4"
Overall
Length
2-5/16"
Bevel
8 Deg
Replacement Bearings: LR95004
8
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Chamfer Bits, with Bearing, 2 Flutes
A
A
B
B
Part
Cutting Cutting Shank Overall
Number
Dia
Length
Dia
Length
Bevel
LR91500 1-1/4"
LR91504 1-1/4"
LR91508
2"
LR91512 2-1/2"
45
45
45
45
1/2"
1/2"
3/4"
1"
1/4"
1/2"
1/2"
1/2"
2"
2-3/8"
2-5/8"
2-13/16"
Deg
Deg
Deg
Deg
Replacement Bearings: (A) LR95002 (B) LR95004
Bevel Bits with Bearing, 2 Flutes
Part
Cutting
Number
Dia
LR93102
LR93103
LR93104
LR93105
LR93106
2-3/32"
1-41/64"
1-1/2"
1-15/64"
1"
Cutting Shank Overall
Length
Dia
Length
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1/2"
1/2"
1/2"
1/2"
1/2"
Axis
3-5/16" 60 Deg
3-5/16" 67.5 Deg
3-5/16" 70 Deg
3-5/16" 75 Deg
3-5/16" 80 Deg
Replacement Bearings: LR95004
Chamfer Bits, with Bearing, 3 Flutes
Part
Number
Cutting Cutting
Dia
Length
LR93040
LR93042
LR93044
LR93046
3/4"
13/16"
15/16"
1-7/16"
3/8"
3/8"
3/8"
3/8"
Shank
Dia
Overall
Length
Bevel
1/4"
1/4"
1/4"
1/4"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
10
15
25
45
Deg
Deg
Deg
Deg
Replacement Bearing: LR95005B
T rim Cutter Assembly
Chamfer Bits, with Bearing, 2 Flutes
A
A
C
A
B
B
Part
Cutting Cutting Shank Overall
Number
Dia
Length
Dia
Length
Bevel
LR93060
LR93062
LR93062A
LR93064
LR93066
LR93066A
0 Deg
15 Deg
15 Deg
25 Deg
45 Deg
15 Deg
1/2"
5/8"
5/8"
3/4"
1"
1"
1/4"
1/4"
1/2"
1/4"
1/4"
3/8"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
2-1/8"
2-1/8"
2"
2-1/8"
2-1/8"
2"
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Bevel
LR93100
LR93108
LR93110
LR93118
LR93120
LR93128
7/8"
7/8"
1"
1"
1-1/16"
1-1/16"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
0 Degree
0 Degree
15 Degree
15 Degree
25 Degree
25 Degree
Replacement Parts:
Ball Bearing:
Shank 1/4":
Shank 1/2":
LR95008
LR95100
LR95104
Assembly comes with
1 cutter only
( not as illustrated)
Replacement Bearings: (A) LR95004 (B) LR95006
(C) LR95002
4 Wing Cutters Only
Bevel Bit, 2 Flutes
9
Part
Cutting Cutting Shank Overall
Number
Dia
Height
Dia
Length
Bevel
LR93107
45 Deg
1-3/8"
11/16"
1/4"
2-1/4"
Part
Number
Cutting
Dia
Cutting
Height
Inside
Dia
Bevel
LR93140
LR93150
LR93160
7/8"
1"
1-1/16"
1/4"
1/4"
1/4"
5/16"
5/16"
5/16"
0 Degree
15 Degree
25 Degree
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
A
C
V-Groove and Scorer, 90 Degree, Solid Carbide
Tee/Bumper Moulding Bits, 2 Flutes
Part
Number
Cutting Cutting Shank Overall
Dia
Length
Dia
Length
LR89400A 13/64"
LR89400C 19/64"
5/32"
15/32"
1/4"
1/4"
2-3/8"
2-9/16"
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR89298
LR89299
LR89300
1/8"
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
Overall
Length
1-1/2"
1-1/2"
1-1/2"
Bevel
25 Deg
38 Deg
Rip & Slotter Bit, Solid Carbide
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR94300
1/4"
1/4"
1/4"
Overall
Length
1-1/2"
Laminate Overhang T rim Bit, Carbide T ipped
Part
Cutting
Number Dia
LR93500
3/8"
Cutting Shank
Length
Dia
1/2"
1/4"
Overhang Overall
Length
3/16"
2-13/16"
Flush T rimmer Bits, with Boring Point,
Solid Carbide
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR94010
LR94012
1/4"
1/4"
1/4"
3/8"
1/4"
1/4"
Overall
Length
1-1/2"
1-1/2"
Flush T rimming Bits, Solid Carbide
Part
Cutting
Number Dia
LR94000
LR94002
1/4"
1/4"
Cutting Shank
Length
Dia
1/4"
3/8"
1/4"
1/4"
Bevel
Overall
Length
0 Degree
0 Degree
1-1/2"
1-1/2"
Flush & Bevel T rimming Bit, Solid Carbide
Part
Cutting
Number Dia
LR94008 1/4"
LR94004 3/16"
LR94005 3/16"
Cutting Shank
Length
Dia
1/4"
1/4"
1/4"
1/4"
Bevel
7 Degree
7 Degree
3/8"
1/4"
Bevel
0+7 Degree
Overall
Length
1-1/2"
Round Bottom Veining Bits, Solid Carbide
Bevel T rimming Bits, Solid Carbide
Part
Cutting
Number Dia
Cutting Shank
Length
Dia
Overall
Length
1-1/2"
2-1/2"
Part
Cutting
Number Dia
LR89200 1/8"
LR89202 3/16"
LR89204 1/4"
Cutting Shank
Length
Dia
1/4"
1/4"
11/32"
1/4"
1/4"
1/4"
Radius
1/16"
3/32"
1/8"
Overall
Length
1-1/2"
1-1/2"
1-1/2"
10
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Key Hole Bits
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Neck
Dia
1/4"
1/4"
3/16"
5/16"
1/4"
3/16"
Carbide Tipped, 1 Flute
HSS Straight Edge Panel Bits
Part
Number
Cutting
Dia
LR83450
LR83452
Cutting
Length
Shank
Dia
Overall
Length
3/4"
3/4"
3/4"
7/8"
1"
1/4"
1/4"
3/8"
3/8"
1/2"
2-5/8"
2-5/8"
2-5/8"
3"
3-1/2"
3/4"
7/8"
1/4"
3/8"
2-5/8"
2-3/4"
3/8"
1/2"
3/8"
3/8"
Solid Carbide, 2 Flutes
LR89452
25/64"
3/8"
Single Flute
LR82000
LR82006
LR82010
LR82012
LR82016
1/4"
5/16"
3/8"
3/8"
1/2"
Double Flute
LR82100
LR82106
1/4"
3/8"
T-Slot Bits, 2 Flutes (Straight)
Part
Number
Large
Dia
Small
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR89455
LR89457
LR89456
1-3/32"
1-3/32"
1-3/8"
3/8"
3/8"
1/2"
5/16"
5/16"
3/8"
1/2"
3/8"
1/2"
2-5/8"
2-3/8"
2-9/16"
HSS Single Edge Downcut Panel Pilots
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR82300
LR82304
LR82306
1/4"
3/8"
1/2"
3/4"
7/8"
1-3/4"
1/4"
3/8"
1/2"
2-5/8"
3-1/2"
4-1/2"
Carbide T ipped Straight Edge Panel Bits
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
3/4"
1"
1-3/16"
2"
1/4"
3/8"
1/2"
1/2"
2-5/8"
2-7/8"
3-1/2"
4-3/4"
1"
1"
1-3/16"
2"
1/4"
3/8"
1/2"
1/2"
2-7/8"
2-7/8"
3-1/2"
4-3/4"
T-Slot Bits, 2 Flutes (Radius)
Part
Number
Large
Dia
Small Cutting Shank Overall Radius
Dia Length
Dia
Length
LR89458A 1-1/8" 7/16" 5/32"
LR89458 1-1/8" 7/16" 5/32"
LR89459 1-39/64" 3/8" 5/32"
1/2"
3/8"
1/2"
LR89453
1/2"
1-3/16" 13/32" 21/32"
2-1/16" 5/32"
2-5/32" 5/32"
2-1/16" 5/32"
2-3/8"
Single Flute
LR90000
LR90004
LR90008
LR90012
1/4"
3/8"
1/2"
1/2"
Double Flute
LR90030
LR90034
LR90038
LR90042
11
3/8"
3/8"
1/2"
1/2"
T-Slot Bits, 2 Flutes (Bevelled)
Part
Number
Large
Dia
Small
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR89454
1-3/8"
11/32"
17/32"
1/2"
2"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Slotting Cutters, 3 Wings
Part
Number
Cutting
Dia
Spindle
Dia
Kerf
Depth
of Cut
LR92321
LR92331
LR92341
LR92361
LR92351
LR92371
LR92391
LR92401
LR92411
LR92421
LR92431
LR92441
LR92461
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
1-7/8"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
1/16"
.065"
.070"
.075"
5/64"
.085"
3/32"
.110"
1/8"
.140"
5/32"
3/16"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
2 & 4 wing cutters available upon request
Parts for Cutter Assemblies:
1/4" Shank:
3/8" Shank:
1/2" Shank:
1/2" CNC Shank:
Ball Bearing:
LR95100
LR95102
LR95104
LR95110
LR95008
Multipurpose Slotting Cutters Set, 2 Wings
Part
Number
Cutting
Dia
Spindle
Dia
Shank
Dia
Depth
of Cut
LR92500
1-7/8"
5/16"
1/2"
1/2"
Complete Set consitsts of:
Four 2 wing slotting cutters marked:
Cutter "A" (3.2mm) LR92501A
Cutter "B" (4.0mm) LR92501B
Cutter "C" (4.8mm) LR92501C
Cutter "D" (6.3mm) LR92501D
Arbor & Nut 1/2": LR95105
Ball Bearing: LR95008
Spacers: LR95309 (6.0mm)
Washers: LR95306 (1.0mm)
Shims: LR95304 (0.5mm)
LR95302 (0.1mm)
3pcs
5pcs
4pcs
10pcs
Finger Joint Bit, 3 Wings
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR85733
1-9/16"
1-3/16"
1/2"
3-3/4"
Replacement Parts:
Finger Slot Cutter:
Abutting Edge Cutter:
Arbor & Nut 1/2":
Ball Bearing:
Spacers:
Washers:
Shims:
LR85734 - 5pcs
LR85735 - 1pc
LR95105A
LR95010
LR95308 (3.4mm)
LR95306 (1.0mm)
LR95304 (0.5mm)
LR95302 (0.1mm)
Box Joint Set, 3 Wings
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR92737
1-7/8"
1-3/8"
1/2"
3-3/4"
Replacement Parts:
6pcs
2pcs
1pc
10pcs
Slotting Cutter:
Arbor & Nut 1/2":
Ball Bearings:
Spacers:
Washers:
Shims:
LR92431 - 5pcs
LR95105A
LR95023, LR95025, LR95026
LR95311 (5.5mm) 4pcs
LR95306 (1.0mm) 1pc
LR95304 (0.5mm) 1pc
12
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Dovetail Bits, 2 Flutes
Part
Number
LR89400A
LR89400B
LR89400
LR89409
LR89402
LR89410
LR89406
LR89404
LR89412
LR89413
LR89414
LR89415
LR89416
LR89417
LR89418
LR89419
LR89420
LR89421
LR89422
Cutting Cutting
Dia
Length
13/64"
1/4"
5/16"
5/16"
3/8"
3/8"
3/8"
1/2"
1/2"
17/32"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1-1/8"
1-1/4"
5/32"
5/16"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
5/8"
7/8"
7/8"
3/4"
7/8"
7/8"
1"
3/4"
1"
Shank Overall
Dia
Length
1/4"
1/4"
1/4"
1/2"
1/4"
1/2"
3/8"
1/4"
1/2"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
2-3/8"
2-1/2"
2-1/2"
2-1/2"
1-5/8"
1-5/8"
2"
1-3/4"
2-3/16"
1-3/4"
2-3/8"
2-1/16"
2-1/2"
2-1/2"
2-5/8"
2-5/8"
2-5/8"
2-3/8"
2-5/16"
Degree
Ea Side
25
7
9
9
9
9
9
14
14
14
7
7
7
14
7
14
14
7
14
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Carbide T ipped Auto Dovetail Bits
Threaded shank for: Wyson-Miles, Dodds
or Bell machines
LR89500 (Series)
NOTE: Available Upon Request Only
Add “L” to end of part number for LEFT HAND rotation
Carbide T ipped Auto Dovetail Bits
Part
Number
Large
Dia
Tail
Length
Shank
Dia
1/2"
3/8"
3/8-20 Thread
1/2"
3/8"
3/8-20 thread
High Speed Steel
LR89541
Carbide Tipped
LR89641
Dovetail Bit, with Bearing, 2 Flutes
Part
Cutting
Number
Dia
LR94272
1/2"
Cutting
Length
1/2"
Shank Overall
Dia
Length
1/4"
2-1/4"
Degree
Ea Side
14 Degree
Replacement Bearing: LR95004A
Flush T rim “V” Groove Bits,
with Bearing, 2 Flutes
Dovetail Bit, with Spurs, 2 Flutes
Part
Cutting
Number
Dia
LR89423
13
9/16"
Cutting
Length
17/32"
Shank Overall
Dia
Length
1/4"
2-3/16"
Degree
Ea Side
14 Degree
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR93034
LR93038
1/2"
1/2"
1"
1"
1/4"
1/2"
2-5/8"
3-1/4"
Replacement Bearing: LR95004
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
“V” Grooving Bits, 2 Flutes
Part
Number
Cutting Cutting
Dia
Length
LR89302
3/8"
LR89302A 3/8"
LR89303
1/2"
LR89303A 1/2"
5/8"
LR89304
LR89304A 5/8"
LR89305
3/4"
LR89306
3/4"
LR89309
7/8"
LR89309A 7/8"
LR89307
1"
LR89308
1"
LR89310 1-1/4"
LR89312 1-1/2"
LR89314 1-3/4"
2"
LR89316
LR89318
1/2"
LR89320
1/2"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
3/4"
1"
1-1/4"
1-1/2"
1-3/4"
1/2"
1/2"
Shank Overall
Dia
Length
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/4"
1/4"
1-3/4"
1-3/4"
1-3/4"
2-1/8"
1-3/4"
2-1/8"
1-3/4"
2-1/4"
2"
2-1/4"
1-3/4"
2-3/8"
2-1/2"
2-7/8"
3"
3"
1-3/4"
1-3/4"
Degree
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
60
70
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Degree
Core Box Bits (Round Nose), 2 Flutes
Part
Number
Cutting Radius Cutting
Dia
Length
Shank Overall
Dia
Length
Shallow Profile
LR89200A
LR89202A
LR89205
LR89206
LR89206A
LR89207
LR89207A
LR89208
LR89208A
LR89210
LR89210A
LR89212
LR89212A
LR89211
LR89211A
LR89213
LR89213A
LR89215
1/8"
3/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1-1/4"
1/16"
3/32"
5/32"
3/16"
3/16"
7/32"
7/32"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
5/8"
3/8"
1/2"
3/8"
1/4"
1/4"
5/8"
5/8"
5/16"
5/16"
3/8"
3/8"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
3/4"
1/4"
1/4"
1/4"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/2"
1-3/4"
1-3/4"
1-1/2"
1-1/2"
1-7/8"
1-3/4"
2-3/8"
1-1/2"
2"
1-1/2"
2"
1-1/2"
2"
1-3/4"
2"
1-3/4"
2-3/16"
2-3/16"
“V” Grooving Bits, with Bearing, 2 Flutes
Part
Cutting
Number
Dia
LR94268
1/2"
Cutting
Length
1/2"
Shank Overall
Dia
Length
1/4"
2"
Degree
90 Degree
Replacement Bearing: LR95004A
Part
Number
Cutting
Dia
Radius Cutting
Length
Shank Overall
Dia
Length
Deep Profile
Solid Carbide Engraving Bit
Part
Cutting
Number
Dia
LR89340
9/16"
Cutting
Length
7/8"
Shank Overall
Dia
Length
1/4"
2-1/4"
Degree
LR89204A
LR89214
LR89216
LR89218
LR89220
LR89222
LR89224
LR89226
LR89226A
LR89226B
LR89227
1/4"
3/8"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
1-1/4"
1-1/2"
2"
1/8"
3/16"
1/4"
9/32"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"
1/2"
1"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
60 Degree
14
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Ball Grooving Bits, 2 Flutes
Core Box Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
LR94270
1/2"
Radius Cutting
Length
1/8"
1/2"
Shank Overall
Dia
Length
1/4"
2"
Replacement Bearing: LR95004A
Part
Number
Large
Dia
Radius
Small
Dia
LR89271
LR89272
LR89273
LR89274
LR89275
LR89276
LR89277
1/2"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
1/4"
9/32"
5/16"
5/16"
11/32"
13/32"
7/16"
Shank Overall
Dia
Length
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
2-1/4"
2-7/16"
2-1/2"
2-5/8"
2-3/4"
2-7/8"
3"
Cove Plunge Type Bits,
with Centre Bearing, 2 Flutes
Cutting Radius Cutting
Part
Number
Dia
Length
A
B
C
D
LR89280
LR89281
LR89282
LR89283
1/2"
3/4"
3/4"
1-1/8"
1/8"
1/4"
1/4"
1/4"
1/2"
5/8"
5/8"
5/8"
Shank Overall
Dia
Length
1/4"
1/4"
1/2"
1/2"
2-1/8"
2-5/16"
2-5/16"
2-5/8"
Replacement Bearing: (A) LR95004A (B) LR95006
(C) LR95006C (D) LR95009
Convex Beading Bits, 2 Flutes
Part
Number
Cutting
Dia
LR89264
LR89265
LR89266
LR89268
13/16"
7/8"
31/32"
1-1/4"
Radius Cutting
Length
5/32"
3/16"
15/64"
25/64"
5/16"
3/8"
15/32"
25/32"
Shank Overall
Dia
Length
1/4"
1/4"
1/4"
1/2"
1-7/8"
2"
2"
3"
Replacement Bearing: LR95004
Convex Beading Bits, 2 Flutes
Part
Number
LR89260
LR89260A
LR89261
LR89261A
LR89262
Cutting
Dia
3/4"
3/4"
7/8"
7/8"
1"
Radius Cutting
Length
3/16"
5/16"
15/32"
3/4"
1-1/4"
3/8"
1/2"
3/4"
1"
1-1/2"
Replacement Bearing: LR95004
15
Shank Overall
Dia
Length
1/2"
1/2"
1/2"
1/2"
1/2"
2-5/8"
2-3/4"
3-1/16"
3-3/8"
3-7/8"
Convex Beading Bits,
with Centre Bearing, 2 Flutes
Part
Number
Cutting
Dia
LR89269
LR89270
3/4"
7/8"
Radius Cutting
Length
1/8"
13/64"
1/4"
25/64"
Shank Overall
Dia
Length
1/4"
1/4"
Replacement Bearings: Center LR95004A
Top LR95004
2-1/4"
2-3/8"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Rabbeting Bits,
with 1/2" & 3/8" Bearing, 2 Flutes
Part
Number
Cutting Rabbet Cutting Shank Overall
Dia
Depth(E) Length
Dia
Length
Depth of Rabbet 3/8" & 7/16" (1/2" Bearing)
LR91100
LR91104
LR91101
LR91102
1-1/4"
1-1/4"
1-3/8"
1-3/8"
3/8"
3/8"
7/16"
7/16"
1/2"
1/2"
1/2"
1/2"
1/4"
1/2"
1/4"
1/2"
2"
2-3/8"
2"
2-3/8"
Replacement Bearing: LR95004
Depth of Rabbet 7/16" & 1/2" (3/8" Bearing)
LR91103
LR91105
LR91107
LR91109
1-1/4"
1-1/4"
1-3/8"
1-3/8"
7/16"
7/16"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/4"
1/2"
1/4"
1/2"
2"
2-3/8"
2"
2-3/8"
Rabbeting Cutter Sets,
with 7 Different Rabbets, 2 Flutes
Part
Number
LR91108
LR91108A
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
1-3/8"
1-3/8"
1/2"
1/2"
1/4"
1/2"
2"
2-3/8"
Replacement Parts:
Bearing:
1/2" Rabbet: LR95000
7/16" Rabbet: LR95004
3/8" Rabbet: LR95005A
5/16" Rabbet: LR95006A
1/4" Rabbet: LR95008D
1/8" Rabbet: LR95009B
Flush: LR95010B
Allen Key: 582-KEY-3/32
Spring
Washer:
LR95252
LR95252
LR95252
LR95252
LR95252
LR95252
LR95252
Washer:
LR95206
LR95202
LR95204
LR95204
LR95204
LR95204
LR95204
Screw:
580.HC#07
580.HC#07
580.HC#07
580.HC#07
580.HC#07
580.HC#07
580.HC#07
Replacement Bearing: LR95000
Stepped Rabbeting Bits, 2 Flutes
Part
Number
Large
Dia
Small
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR91111
LR91112
LR91113
3/4"
3/4"
7/8"
3/8"
1/2"
9/16"
3/4"
5/8"
11/16"
1/4"
1/4"
1/2"
1-7/8"
2"
2-1/4"
A
Rabbeting Cutter Sets,
with 4 Different Rabbets, 2 Flutes
Part
Number
LR91106
LR91106A
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
1-3/8"
1-3/8"
1/2"
1/2"
1/4"
1/2"
2"
2-3/8"
B
Replacement Parts:
Bearing:
1/2" Rabbet: LR95000
7/16" Rabbet: LR95004
3/8" Rabbet: LR95005A
5/16" Rabbet: LR95006A
Allen Key: 582-KEY-3/32
Washer:
LR95206
LR95202
LR95204
LR95204
Spring
Washer:
LR95252
LR95252
LR95252
LR95252
Screw:
580.HC#07
580.HC#07
580.HC#07
580.HC#07
Bevel Glue Joint Bits, 2 Flutes
Part
Number
Large Small Cutting Degree Shank Overall
Dia
Dia Length
Dia Length
LR85719A 1-1/4" 9/16"
LR85719B 1-1/4" 9/16"
1-1/4"
1-1/4"
15
15
1/2"
1/2"
2-3/4"
2-3/4"
16
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Bottom Cleaning Straight Bits, 2 Flutes
Part
Number
A LR89285
B LR89286
C LR89287
Cutting
Dia
Cutting
Length
Shank
Dia
3/4"
1"
1-1/2"
7/16"
7/16"
5/8"
1/4"
1/2"
1/2"
Overall
Length
2-3/16"
2-1/2"
2-3/4"
Glue Joint Bit, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR85725
1-29/64"
1-1/8"
1/2"
Overall
Length
2-5/8"
Replacement Bearing: (A) LR95006 (B) LR95008E
(C) LR95008B
LR85717
LR89419
Mitre Lock Bits, 2 Flutes
Spline Glue Joint Bits, 2 Flutes
Part
Cutting
Number
Dia
Cutting
Length
Degree
LR85717 1-7/64" 1-13/16" 14 Degree
LR89419
7/8"
7/8"
14 Degree
Shank Overall
Dia
Length
1/2"
1/2"
3-5/16"
2-5/8"
Part
Number
Cutting
Dia
Cutting Max Wood Degree Shank Overall
Dia
Length
Depth
Length
LR85736A 1-1/2"
1/2"
13/32"
LR85736B 1-3/4"
3/4"
21/32"
LR85736 2-23/32" 1-3/16" 1-1/16"
45
45
45
1/4" 1-5/8"
1/2" 2-1/4"
1/2" 2-11/16"
Beading
Thumb Nail Bits, with Bearing, 2 Flutes
Locking Joint Bits, 2 Flutes
Part
Number
LR85721
LR85722
LR85722B
17
Cutting
Dia
Cutting
Length
Shank
Dia
3/4"
1"
1"
1/2"
1/2"
1/2"
1/4"
1/4"
1/2"
Overall
Length
1-7/8"
1-7/8"
1-7/8"
Part
Number
Cutting
Dia
Cutting
Length
LR91228
LR91230
LR91232
1-3/16"
1-3/16"
2-1/2"
3/8"
3/8"
11/16"
Radius Shank
Dia
Overall
Length
15/32"
15/32"
1-7/8"
2-1/16"
2-1/16"
2-1/2"
1/4"
1/2"
1/2"
Replacement Bearings: LR95004
To achieve beading cuts add B to end of Part Number
Replacement Bearings: LR95000 (beading cut)
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Beading
Plunge Type Rounding Over Bits, 2 Flutes
Rounding Over Bits, with Bearing, 2 Flutes
Part
Cutting Cutting
Number
Dia
Length
LR91198
LR91209
LR91199
LR91211
LR91201
LR91203
LR91200
LR91210
LR91202
LR91212
LR91204
LR91214
LR91206
LR91216
LR91208
LR91218
LR91219
LR91220
LR91221
LR91222
LR91223
LR91224
LR91225
LR91226
5/8"
5/16"
5/8"
5/16"
3/4"
3/8"
3/4"
3/8"
3/8"
3/4"
3/4"
3/8"
7/8"
1/2"
7/8"
1/2"
1"
1/2"
1"
1/2"
1/2"
1-1/8"
1-1/8"
1/2"
1-1/4"
5/8"
1-1/4"
5/8"
1-1/2"
3/4"
1-1/2"
3/4"
1-3/4"
7/8"
2"
1"
2-1/4" 1-1/8"
2-1/2" 1-1/4"
2-3/4" 1-3/8"
3"
1-1/2"
3-1/4" 1-9/16"
3-1/2" 1-3/4"
Radius Shank Overall
Dia
Length
1/16"
1/16"
1/8"
1/8"
5/32"
5/32"
3/16"
3/16"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
1/2"
1/2"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1-3/4"
2-3/16"
1-15/16"
2-5/16"
1-15/16"
2-5/16"
1-15/16"
2-5/16"
1-15/16"
2-5/16"
1-15/16"
2-5/16"
2-1/16"
2-7/16"
2-3/16"
2-9/16"
2-5/8"
2-3/4"
2-7/8"
3"
3-1/4"
3-1/4"
3-1/2"
3-3/4"
Replacement Bearings: LR95004
To achieve beading cuts add B to end of Part Number
Replacement Bearings: LR95000 (beading cut)
Part
Cutting
Number
Dia
Cutting
Length
3/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1-3/8"
1-3/4"
2"
5/16"
5/16"
1/2"
1/2"
9/16"
9/16"
5/8"
5/8"
1"
1-1/4"
1-7/16"
LR89098
LR89099
LR89100
LR89101
LR89102
LR89103
LR89104
LR89105
LR89106
LR89110
LR89112
Part
Number
Cutting
Dia
Cutting
Length
LR89111
1-7/16"
1-3/8"
Radius Shank
Dia
10mm
1/2"
Overall
Length
3-1/4"
1/8"
3/16"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
1/2"
5/8"
3/4"
1/4"
1/2"
1/4"
1/2"
1/2"
1/4"
1/2"
1/4"
1/2"
1/2"
1/2"
2"
1-1/2"
1-5/8"
1-5/8"
2-1/16"
1-11/16"
2-1/8"
1-3/4"
2-3/4"
2-3/4"
2-15/16"
Plunge Type Rounding Over Bits, 2 Flutes
with Boring Point (Corner Round)
Part
Cutting
Number
Dia
Cutting
Length
LR89107
7/8"
1-3/16"
LR89108 1-3/16" 1-3/8"
LR89109 1-11/32" 1-1/2"
Rounding Over Bit with Bearing, 2 Flutes
Radius Shank Overall
Dia
Length
Radius Shank Overall
Dia
Length
1/8"
1/4"
3/16"
1/2"
1/2"
1/2"
2-23/32"
2-7/8"
3"
Plunge Type Corner Rounding Bit, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR89097
1-3/16" 1-7/16"
Radius Shank
Dia
5mm
1/2"
Overall
Length
2-7/8"
18
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Corner Rounding Plunge Type,
with Centre Bearing, 2 Flutes
Bull Nose Bits (Half Round), 2 Flutes
Cutting Cutting Radius Shank Overall Bearing
Length
Dia
Length
Dia
Part
Number
LR89115 1/2"
LR89116 3/4"
LR89117 7/8"
LR89118 1-1/8"
3/8"
3/8"
1/2"
9/16"
1/8"
1/8"
3/16"
5/16"
1/4"
1/4"
1/4"
1/2"
1-7/8"
2"
2-1/8"
2-1/8"
LR95004A
LR95006
LR95008
LR95009
Beading
Matching Corner Round/Cove Bits, 2 Flutes
Part
Number
LR89120
LR89121
LR89122
Cutting
Dia
Cutting
Length
Radius
Shank
Dia
Overall
Length
1-1/8"
1-1/4"
1-3/8"
35/65"
43/64"
51/64"
1/4"
5/16"
3/8"
1/4"
1/4"
1/4"
2-19/32"
2-23/32"
2-27/32"
Part
Number
Cutting
Dia
Cutting Radius Shank
Length
Dia
LR89230A 17/32"
1/2"
LR89230 17/32"
1/2"
LR89232A 19/32"
1/2"
LR89232 19/32"
1/2"
LR89234A 21/32"
3/4"
LR89234 21/32"
3/4"
LR89236A 7/8"
3/4"
LR89236
7/8"
3/4"
LR89238A 1-1/32"
1"
LR89238 1-1/32"
1"
LR89239 1-1/16"
1"
LR89240 1-5/16" 1-3/8"
LR89242 1-11/16" 1-9/16"
LR89243
2"
2"
LR89244* 2-3/8"
2"
5/64"
5/64"
7/64"
7/64"
9/64"
9/64"
13/64"
13/64"
17/64"
17/64"
5/16"
3/8"
1/2"
5/8"
3/4"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
O.A.L. Size of
Opening
1-5/8"
2-3/16"
1-5/8"
2"
1-7/8"
2-1/4"
1-7/8"
2-1/4"
2-1/8"
2-1/2"
2-1/2"
2-7/8"
3-1/16"
3-1/2"
3-1/2"
5/32"
5/32"
7/32"
7/32"
9/32"
9/32"
13/32"
13/32"
35/64"
35/64"
5/8"
3/4"
1"
1-1/4"
1-1/2"
* This bit has 3 flutes and is suitable for Corian and woods
Replacement Bearings: LR95005D
To achieve beading cuts change bottom bearing
to LR95005E
Cove Bits, with Bearing, 2 Flutes
Part
Number
Canoe Bits, with Bearing, 2 Flutes
A
A
A
A
B
Part
Cutting
Number Dia
Cutting
Length
LR89125
1"
LR89126
1"
LR89127 1-1/4"
LR89128 1-1/4"
LR89129
2"
5/8"
5/8"
1"
1"
1-1/4"
Radius Shank
Dia
1/8"
1/8"
3/16"
3/16"
1/4"
1/4"
1/2"
1/4"
1/2"
1/2"
Overall
Length
2-1/4"
2-5/8"
2-5/8"
2-7/8"
3-1/8"
Replacement Bearing: (A) LR95004 (B) LR95005B
19
LR90992
LR91005
LR90994
LR91005A
LR91000A
LR91006A
LR91000
LR91006
LR91001
LR91007
LR91002
LR91008
LR91004
LR91010
LR91011
LR91012
LR91014
LR91016
LR91018
Cutting
Dia
Cutting
Length
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
7/8"
1"
1"
1-1/8"
1-1/8"
1-3/8"
1-3/8"
1-5/8"
1-7/8"
2-3/8"
2-3/8"
3"
1/2"
1/2"
1/2"
1/2"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
3/4"
3/4"
3/4"
1"
1-1/4"
1-1/4"
1-1/2"
Radius Shank
Dia
1/16"
1/16"
1/8"
1/8"
3/16"
3/16"
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
1/2"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
Replacement Bearing: LR95002
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
Overall
Length
2"
2-3/8"
2"
2-3/8"
2-1/16"
2-7/16"
2-1/16"
2-7/16"
2-1/16"
2-7/16"
2-1/16"
2-7/16"
2-1/4"
2-7/16"
2-5/8"
3"
3-3/8"
3-3/8"
3-3/8"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Bull Nose Bits (Half Round),
with Bearing, 2 Flutes
Part
Number
LR89225
LR89225A
LR89228
LR89228A
LR89229
LR89229A
Cut
Dia
Cut
Length
Rad
25/32"
3/4"
9/64"
29/32"
3/4" 13/64"
1-1/32"
1"
17/64"
1-3/8" 1-1/4" 3/8"
1-3/4" 1-9/16" 1/2"
2"
2"
5/8"
Shk
Dia
Flat Ogee Bits, with Bearing, 2 Flutes
O.A.L. Size of
Opening
1/2" 2-5/8"
1/2" 2-5/8"
1/2"
3"
1/2" 3-5/16"
1/2" 3-5/8"
1/2"
4"
17/64"
25/64"
35/64"
3/4"
1"
1-1/4"
Cutting
Part
Dia
Number
LR85780
LR85782
LR85784
LR85786
1-1/8"
1-1/8"
1-3/8"
1-3/8"
Cutting
Length
1/2"
1/2"
5/8"
5/8"
Radius Shank
Dia
3/16"
3/16"
5/16"
5/16"
1/4"
1/2"
1/4"
1/2"
Overall
Length
2"
2-3/8"
2-1/8"
2-1/2"
Replacement Bearing: LR95004
Replacement Bearing: LR95004
Roman Ogee Bits, with Bearing, 2 Flutes
T rue Bull Nose Bits, 2 Flutes
Part
Number
Cut
Dia
LR89245 13/16"
LR89246 13/16"
Cut
Length
1-1/4"
1-1/4"
Rad
Shk
Dia
23/32"
23/32"
1/4"
1/2"
Cutting
Part
Dia
Number
O.A.L. Size of
Opening
2-1/2"
2-3/4"
7/8"
7/8"
LR91400
LR91404
LR91402
LR91406
1"
1"
1-3/8"
1-3/8"
Cutting
Length
5/8"
5/8"
3/4"
3/4"
Radius Shank
Dia
5/32"
5/32"
1/4"
1/4"
1/4"
1/2"
1/4"
1/2"
Overall
Length
2-1/16"
2-7/16"
2-1/4"
2-5/8"
Replacement Bearing: LR95002
Classic Panel Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR85770
LR85772
LR85774
LR85776
1-1/8"
1-1/8"
1-3/8"
1-3/8"
1/2"
1/2"
5/8"
5/8"
Radius Shank
Dia
3/16"
3/16"
5/16"
5/16"
Replacement Bearing: LR95004
1/4"
1/2"
1/4"
1/2"
Roman Ogee Bits, with Bearing, 2 Flutes
Overall
Length
Cutting
Part
Dia
Number
2"
2-3/8"
2-1/8"
2-1/2"
LR85790
LR85792
LR85794
LR85796
1"
1"
1-3/8"
1-3/8"
Cutting
Length
5/8"
5/8"
3/4"
3/4"
Radius Shank
Dia
5/32"
5/32"
1/4"
1/4"
1/4"
1/2"
1/4"
1/2"
Overall
Length
2-1/16"
2-7/16"
2-1/4"
2-5/8"
Replacement Bearing: LR95002
20
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Beading
1
Classic Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR85760
LR85762
LR85764
LR85766
1-1/8"
1-1/8"
1-3/8"
1-3/8"
1/2"
1/2"
11/16"
11/16"
Radius Shank
Dia
5/32"
5/32"
7/32"
7/32"
1/4"
1/2"
1/4"
1/2"
Overall
Length
2"
2-3/8"
2-3/16"
2-9/16"
2
Panelling Bits, with Bearing, 2 Flutes
Part
Number
LR85750
LR85752
LR85754
LR85756
Cutting
Dia
Cutting
Length
Rad
1
Rad
2
Shank
Dia
Overall
Length
1-1/8"
1-1/8"
1-3/8"
1-3/8"
1/2"
1/2"
5/8"
5/8"
5/32"
5/32"
1/4"
1/4"
5/32"
5/32"
3/16"
3/16"
1/4"
1/2"
1/4"
1/2"
2-1/16"
2-3/8"
2-3/16"
2-9/16"
Replacement Bearing: LR95004
To achieve beading cuts change bearing to LR95000
Replacement Bearing: LR95004
To achieve beading cuts change bearing to LR95000
Classic Bits, with Bearing, 2 Flutes
Ogee Fillet Bits, with Bearing, 2 Flutes
Part
Cutting Cutting Radius Radius Shank Overall
Dia Length
Number
Dia
Length
1
2
Part
Number
Cutting
Dia
Cutting
Length
LR85579
LR85580
LR85581
LR85582
LR85740
LR85742
LR85744
LR85746
1-1/8"
1-1/8"
1-3/8"
1-3/8"
1/2"
1/2"
11/16"
11/16"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
1/2"
1/2"
5/8"
5/8"
3/16"
3/16"
15/64"
15/64"
1/16"
1/16"
9/64"
9/64"
1/4"
1/2"
1/4"
1/2"
2-1/16"
2-3/8"
2-3/32"
2-1/2"
Replacement Bearing: LR95004
Radius Shank
Dia
5/32"
5/32"
1/4"
1/4"
1/4"
1/2"
1/4"
1/2"
Overall
Length
2-1/16"
2-3/8"
2-3/16"
2-9/16"
Replacement Bearing: LR95004
To achieve beading cuts change bearing to LR95000
Beading
Ogee Fillet Bits, with Bearing, 2 Flutes
Part
Cutting
Number
Dia
LR85584
LR85585
LR85586
1-3/8"
1-3/8"
1-5/8"
Cutting
Length
9/16"
9/16"
3/4"
Radius Shank
Dia
5/32"
5/32"
1/4"
1/4"
1/2"
1/2"
Overall
Length
2-1/16"
2-1/2"
2-5/8"
Replacement Bearing: LR95004
To achieve beading cuts change bearing to LR95000
21
Wavy Edge Bits, with Bearing, 2 Flutes
Part
Cutting
Number
Dia
LR85487
LR85488
1-1/4"
1-1/4"
Cutting
Length
11/16"
11/16"
Radius Shank
Dia
5/32"
5/32"
Replacement Bearing: LR95004
1/4"
1/2"
Overall
Length
2-3/16"
2-9/16"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Rounding Over Plunge Type Bits, 2 Flutes
Door Lip Assembly, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR85720
1-5/8"
1"
1/2"
3"
Part
Cutting
Number
Dia
LR85805
LR85806
Cutting
Length
1-3/4"
1-5/8"
23/32"
23/32"
Radius Shank
Dia
Overall
Length
23/32"
1"
2-7/32"
2-7/32"
1/2"
1/2"
Replacement Parts:
Radius Cutter: LR85720A 3/8" Radius
Rabetting Cutter: LR85720B 10 Degree Bevel
1
2
Round and Ogee Plunge Type Bit, 2 Flutes
2
1
Round and Ogee Plunge Type Bits, 2 Flutes
Part
Number
Cut
Dia
LR85800 1-5/8
LR85801 1-31/32
Cut
Rad
1
Length
23/32
23/32
3/8
5/8
Rad
2
Shk
Dia
Overall
Length
3/4
1-3/16
1/2
1/2
2-13/64
2-13/64
Part
Cutting
Number Dia
Cutting
Length
Rad
1
Rad
2
Shank
Dia
Overall
Length
LR85807 1-9/16"
25/32"
5/32"
7/8"
1/2"
2-9/32"
2
1
Panelling Groover, with Centre Bearing,
Round Bottom, 2 Flutes
Step Flat Ogee Plunge Type Bits, 2 Flutes
Cutting
Part
Dia
Number
Cutting
Length
LR85802
1"
LR85803 1-3/16"
19/32"
19/32"
Radius Shank
Dia
3/16"
15/64"
1/2"
1/2"
Overall
Length
Cutting
Length
Rad
1
Rad
2
Shank
Dia
Overall
Length
LR85483 7/8"
LR85484 1-3/8"
1/2"
9/16"
7/32"
13/32"
5/32"
1/4"
1/4"
1/2"
2"
2-5/8"
Replacement Bearings: (A) LR95008 (B) LR95011
2-3/32"
2-3/32"
Panelling Groover, with Centre Bearing,
Flat Bottom, 2 Flutes
2
1
Rounding Over Plunge Type Bit, 2 Flutes
Part
Cutting Cutting
Number
Dia
Length
Rad
1
LR85804 1-5/8"
1/4"
23/32"
Part
Cutting
Number Dia
Rad
2
Shank
Dia
19/32" 1/2"
Overall
Length
2-7/32"
Part
Number
LR85485
LR85486
Cutting Cutting
Dia
Length
7/8"
1-3/8"
3/8"
9/16"
Radius
9/64"
13/64"
Shank Overall
Dia
Length
1/4"
1/2"
2"
2-5/8"
Replacement Bearings: (A) LR95008 (B) LR95011
22
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Flat Ogee Bits Plunge Type, 2 Flutes
Cutting
Part
Dia
Number
LR85465
LR85466
1"
1-3/8"
Cutting
Length
3/8"
3/8"
Radius Shank
Dia
1/8"
1/8"
1/4"
1/2"
Overall
Length
Part
Cutting
Number
Dia
LR85716
Cutting
Length
Radius Shank
Dia
1-3/4"
13/16"
3/16"
Part
Cutting
Number
Dia
Cutting
Length
1/2"
Overall
Length
2-5/16"
2"
2-1/4"
LR85715
1-1/2"
13/16"
Radius Shank
Dia
Overall
Length
15/64"
2-5/16"
1/2"
Ogee Bits Plunge Type, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR85481
LR85482
1-1/16"
1-1/16"
7/16"
7/16"
Radius Shank
Dia
15/64"
15/64"
1/4"
1/2"
Overall
Length
2"
2-1/4"
1
2
Outer Edge Door T rimmer Bits, 2 Flutes
Part
Cutting
Number Dia
Cutting
Length
Rad
1
Rad
2
Shank
Dia
Overall
Length
LR91434
1-1/4"
3/16"
1/4"
1/2"
2-3/4"
2"
Finger Grip Bits, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR85710
LR85712
3/4"
1"
1/4"
3/8"
Radius Shank
Dia
1/4"
3/8"
1/4"
1/4"
Overall
Length
1-3/4"
1-3/4"
Beading Bit Plunge Type, 2 Flutes
Finger Grip Router Bits, 2 Flutes
Part
Cutting
Number
Dia
LR85478
Part
Cutting
Number
Dia
LR85714
3/4"
Cutting
Length
3/4"
Radius Shank
Dia
3/16"
1/2"
3/8"
Cutting
Length
5/16"
Radius Shank
Dia
1/8"
1/4"
Overall
Length
2"
Overall
Length
2-3/16"
T raditional Bits Plunge Type, 2 Flutes
Part
Cutting
Number
Dia
Part
Cutting
Number
Dia
LR85713
23
7/8"
Cutting
Length
13/16"
Radius Shank
Dia
1/16"
1/2"
Overall
Length
2-5/16"
LR85474
LR85475
LR85476
1/2"
3/4"
3/4"
Cutting
Length
3/8"
7/16"
7/16"
Radius Shank
Dia
3/64"
1/16"
1/16"
1/4"
1/4"
1/2"
Overall
Length
2"
2-1/16"
2-5/8"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Ogee Bits Plunge Type, 2 Flutes
Part
Cutting
Number
Dia
LR85461
LR85462
LR85463
LR85464
3/8"
1/2"
3/4"
3/4"
Cutting
Length
5/16"
3/8"
7/16"
7/16"
Radius Shank
Dia
1/16"
5/64"
1/8"
1/8"
1/4"
1/4"
1/4"
1/2"
Ogee Fillet Raised Panel, with Bearing, 2 Flutes
Overall
Length
Part
Cutting
Number
Dia
1-7/8"
2"
2-1/8"
2-3/4"
LR85588
LR85592
2-5/8"
3-3/8"
Cutting
Height
11/16"
5/8"
Radius Shank
Dia
3/4"
7/8"
1/2"
1/2"
Overall
Length
2-9/16"
2-1/2"
Replacement Bearing: LR95004
2
1
Classical Bits Plunge Type, 2 Flutes
Part
Cutting
Number Dia
LR85467
LR85468
LR85469
LR85470
Provincial Raised Panel, with Bearing, 2 Flutes
Cutting
Length
Rad
1
Rad
2
Shank
Dia
Overall
Length
Part
Cutting
Number
Dia
3/8"
1/2"
1/2"
5/8"
1/8"
3/16"
3/16"
1/4"
5/32"
1/4"
1/4"
5/16"
1/4"
1/4"
1/2"
1/2"
2"
2-1/16"
2-3/4"
2-7/8"
LR85590
1/2"
3/4"
3/4"
1"
Corner Ogee Bit Plunge Type, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR85460
15/16"
19/32"
Radius Shank
Dia
3/32"
1/2"
Overall
Length
2-1/4"
LR85591
2-1/2"
Cutting
Height
1/2"
Radius Shank
Dia
1/8"
Replacement Bearing: LR95004
1/2"
Overall
Length
2-3/8"
1/2"
Bevel
Shank
Dia
15 Degree 1/2"
Overall
Length
2-3/8"
Replacement Bearing: LR95004
Cove Raised Panel, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Height
LR85589
3-3/8"
1/2"
Radius Shank
Dia
Overall
Length
1-9/16"
2-3/8"
1/2"
Replacement Bearing: LR95004
Classical Raised Panel, with Bearing, 2 Flutes
Part
Cutting
Number
Dia
3-3/8"
Cutting
Height
Raised Panel, French Provincial,
Plunge Type, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Height
LR85489
2-3/4"
3/4"
Bevel
Shank
Dia
25 Degree 1/2"
Overall
Length
2-1/4"
24
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Raised Panel Router Bits with Back Cutter
Raised Panel Bit Plunge Type, 2 Flutes
Part
Number
LR85480
LR85477
Cutting Cutting
Dia
Length
1-1/8"
2"
1/2"
5/8"
Bevel
Shank
Dia
Overall
Length
30 Deg
10 Deg
1/2"
1/2"
2-3/4"
2-1/2"
Large
Part
Number Dia
Small Cutting Radius Radius Shank Overall
Dia
2
Dia
Length
Height
1
LR85550 3-3/8
2-1/8 1-3/16
7/8
5/16
1/2
3-1/16
Complete Set consists of:
Raised Panel Bits, with Bearing, 2 Flutes
Part
Cutting
Number
Dia
LR85583
1-5/8"
Cutting
Length
Bevel
Shank
Dia
Overall
Length
1/2"
25 Deg
1/2"
2-1/2"
Replacement Bearing: LR95004
Raised Panel Cutter:
Back Cutter:
Ball Bearings:
Washers:
Shims:
Shims:
Shims:
Nut:
LR85550R
LR85550B
LR95005D & LR95017A
LR95207 (12x8x1.0mm)
LR95301 (12x8x0.1mm) 2 pcs
LR95303 (12x8x0.2mm) 2 pcs
LR95305 (12x8x0.5mm) 2 pcs
LR95400 (NF5/16) 1 pc
Vertical Raised Panel Bits, 2 Flutes
LR85595
LR85596
LR85593
LR85594
Large
Part
Number Dia
Small
Dia
LR85551 3-3/8
2-1/8 1-1/16 15 Deg 5/16
Cutting
Height
Bevel Radius Shank Overall
Dia
Length
1/2
Complete Set consists of:
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
LR85595
LR85596
LR85593
LR85594
1"
1-1/8"
1-1/8"
1-3/16"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1/2"
1/2"
1/2"
1/2"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
25
Raised Panel Cutter:
Back Cutter:
Ball Bearings:
Washers:
Shims:
Shims:
Shims:
Nut:
LR85551R
LR85550B
LR95005D & LR95017A
LR95207 (12x8x1.0mm)
LR95301 (12x8x0.1mm) 2 pcs
LR95303 (12x8x0.2mm) 2 pcs
LR95305 (12x8x0.5mm) 2 pcs
LR95400 (NF5/16) 1 pc
2-15/16
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
BB-32A
Part
Large
Number Dia
Small
Dia
Cutting
Height
LR85552 3-3/8
2-1/8
1-1/16 1-9/16 5/16
Rad
1
Rad
2
Shank Overall
Dia
Length
1/2
2-15/16
Complete Set consists of:
Raised Panel Cutter:
Back Cutter:
Ball Bearings:
Washers:
Shims:
Shims:
Shims:
Nut:
LR85552R
LR85550B
LR95005D & LR95017A
LR95207 (12x8x1.0mm)
LR95301 (12x8x0.1mm) 2 pcs
LR95303 (12x8x0.2mm) 2 pcs
LR95305 (12x8x0.5mm) 2 pcs
LR95400 (NF5/16) 1 pc
Part
Number
Cutting Groove Groove
Dia
Width Depth
for 3/4" to 7/8" material
LR85727
1-5/8"
1/4"
3/8"
Shank
Dia
Shank
Length
1/2"
3"
Replacement Parts:
Profile Cutter:
Groove Cutter:
Arbor & Nut:
Ball Bearings:
Washers:
Spacer:
Spacer:
LR85727C
LR85729
LR95105
LR95008
LR95306
LR95302 (0.1mm)
LR95300 (0.05mm)
Rail & Stile Bits, Reversible, 1 Piece, 2 Wings
Part
Number
Cutting Groove Groove
Dia
Width Depth
for 3/4" to 7/8" material
LR85726
1-5/8"
1/4"
3/8"
Shank
Dia
Shank
Length
1/2"
3"
Replacement Parts:
Profile Cutter:
Groove Cutter:
Arbor & Nut:
Ball Bearings:
Washers:
Spacer:
Spacer:
LR85726C
LR85729
LR95105
LR95008
LR95306
LR95302 (0.1mm)
LR95300 (0.05mm)
Part
Number
Cutting Groove Groove
Dia
Width Depth
for 3/4" to 7/8" material
LR85728
1-5/8"
1/4"
3/8"
Shank
Dia
Shank
Length
1/2"
3"
Replacement Parts:
Profile Cutter:
Groove Cutter:
Arbor & Nut:
Ball Bearings:
Washers:
Spacer:
Spacer:
LR85728C
LR85729
LR95105
LR95008
LR95306
LR95302 (0.1mm)
LR95300 (0.05mm)
26
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
“V” Panel Bit Set, 1 Piece, 2 Wings
Part
Number
Cutting Groove Groove
Dia
Width Depth
for 3/4" to 7/8" material
LR85730 1-13/16" 5/32"
1/2"
Shank Overall
Dia
Length
1/2"
3"
Replacement Parts:
Profile Cutter:
Groove Cutter:
Arbor & Nut:
Ball Bearings:
Washers:
Spacer:
Spacer:
LR85730C
LR85732
LR95105
LR95008
LR95306
LR95302 (0.1mm)
LR95300 (0.05mm)
Part
Number
Cutting
Dia
LR85724
1-13/16"
Cutting
Length
1-3/16"
Shank
Dia
Overall
Length
1/2"
3"
Replacement Parts:
Profile Cutter:
Rabetting Cutter:
Groove Cutter:
Arbor & Nut:
Ball Bearings:
LR85724P
LR85700
LR85732
LR95105B
LR95008 &
LR95010C
Spacer:
Spacer:
Shims:
Shims:
Shims:
Shims:
LR95307 (3 pcs)
LR95306 (2 pcs)
LR95304
LR95305
LR95302 (3 pcs)
LR95300
“C” Panel Bit Set, 1 Piece, 2 Wings
Part
Number
Cutting Groove Groove
Dia
Width Depth
for 3/4" to 7/8" material
LR85731 1-13/16" 5/32"
1/2"
Shank Overall
Dia
Length
1/2"
Replacement Parts:
Profile Cutter:
Groove Cutter:
Arbor & Nut:
Ball Bearings:
Washers:
Spacer:
Spacer:
27
LR85731C
LR85732
LR95105
LR95008
LR95306
LR95302 (0.1mm)
LR95300 (0.05mm)
3"
Part
Number
Cutting
Dia
LR85723
1-13/16"
Cutting
Length
1-3/16"
Shank
Dia
Overall
Length
1/2"
3"
Replacement Parts:
Profile Cutter:
Rabetting Cutter:
Groove Cutter:
Arbor & Nut:
Ball Bearings:
LR85723P
LR85700
LR85732
LR95105B
LR95008 &
LR95010C
Spacer:
Spacer:
Shims:
Shims:
Shims:
Shims:
LR95307 (3 pcs)
LR95306 (2 pcs)
LR95304
LR95305
LR95302 (3 pcs)
LR95300
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Tongue & Groove Cutter,
1 Piece, Reversible, 2 Wings
T riple Beading Bits, with Bearing, 2 Flutes
Part
Number
LR89247B
LR89248B
Cutting
Dia
Cutting
Length
7/8"
7/8"
1"
1"
Radius Shank Overall
Dia
Length
1/8"
1/8"
1/4"
1/2"
2-1/2"
2-7/8"
Replacement Bearing: LR95005B
Part
Number
Cutting
Dia
Cutting
Length
for 5/8" to 3/4" material
LR92734
1-5/8"
3/4"
Shank
Dia
Overall
Length
1/2"
3"
1 2 1
Replacement Parts:
Groove Cutter:
Arbor & Nut:
Ball Bearings:
Washers:
Spacer:
Spacer:
Spacer:
LR85729
LR95105
LR95008
LR95306
LR95302
LR95304
LR95309
(2 pcs)
(0.1mm)
(0.5mm)
(6.0mm)
Part
Cutting Cutting
Number Dia
Length
Rad
1
Rad
2
LR89251
LR89252
1/8"
1/8"
3/16"
3/16"
1"
1"
1"
1"
Shank Overall
Dia Length
1/4"
1/2"
2-1/4"
2-1/4"
Replacement Bearing: LR95006
Tongue & Groove - Joint Set, 1 Piece, 3 Wings
Double Beading Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR89254
7/8"
3/4"
Radius Shank Overall
Dia
Length
1/8"
1/2"
2-5/8"
Replacement Bearing: LR95005B
Part
Number
Cutting
Dia
Cutting
Length
for 5/8" to 3/4" material
LR92735
1-7/8"
3/8"
Shank
Dia
Overall
Length
1/2"
3"
Convex Beading Bits, with Bearing, 2 Flutes
Replacement Parts:
Groove Cutter:
Groove Cutter:
Arbor & Nut:
Ball Bearings:
LR92431 (2 pcs)
LR92351 (1 pc)
LR95105
LR95027 &
LR95016
Shims:
Shims:
Shims:
Shims:
Shims:
LR95309
LR95305
LR95306 (2 pcs)
LR95302
LR95300
Part
Number
Cutting
Dia
Cutting
Length
LR89255
LR89256
7/8"
7/8"
1"
1"
Radius Shank Overall
Dia
Length
1/8"
1/8"
1/4"
1/2"
2-1/2"
2-7/8"
Replacement Bearing: LR95005B
28
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
1 2 3
Variable Beading Bits, 2 Flutes
Part
Number
Cut
Dia
Cut
Length
Rad
1
Rad
2
Rad
3
LR89249 7/8
LR89250 7/8
1-1/8
1-1/8
5/32 1/8 5/64
5/32 1/8 5/64
Shank
Dia
Overall
Length
1/4
1/2
2-1/4
2-5/8
Corner Beading Bits, with Bearing, 2 Flutes
Part
Cutting
Dia
Number
Cutting
Length
LR91234
7/8"
LR91236
7/8"
LR91238 1-1/16"
LR91240 1-1/16"
LR91241 1-1/4"
LR91244 1-1/4"
LR91246 1-1/2"
9/16"
9/16"
5/8"
5/8"
3/4"
3/4"
1"
Radius Shank Overall
Length
Dia
1/8"
1/8"
3/16"
3/16"
1/4"
1/4"
3/8"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
1/2"
2-1/8"
2-1/2"
2-1/4"
2-5/8"
2-3/8"
2-5/8"
3"
Bearing
LR95004
LR95004
LR95005B
LR95005B
LR95005B
LR95005B
LR95005B
1 2
T riple Beading Bits, 2 Flutes
Part
Cutting
Number
Dia
LR89253
Cutting
Length
Rad
1
Rad
2
Shank
Dia
Overall
Length
1"
5/64"
1/4"
1/4"
2-1/8"
3/4"
Beading Bits, Leaf Edge Style,
with Double Bearing, 2 Flutes
Part
Number
LR94233
LR94233A
Edge Beading Bits, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Cutting
Dia
Cutting
Length
7/8"
7/8"
1-1/32"
1-1/32"
LR91275
LR91276
LR91277
1"
1-1/8"
1-3/8"
1/2"
5/8"
7/8"
2
Radius Shank Overall
Dia
Length
5/32"
5/32"
1/4"
1/2"
2-5/16"
2-1/2"
Radius Shank Overall
Dia
Length
3/16"
1/4"
3/8"
1/4"
1/4"
1/4"
2-1/2"
2-5/8"
2-7/8"
Replacement Bearing: LR95005
1
Edge Beading Bits, with Bearing, 2 Flutes
Part
Cutting
Number Dia
LR94234
LR94235
LR94236
LR94237
1"
1"
1"
1"
Cutting
Length
7/8"
7/8"
7/8"
7/8"
Rad
1
Rad
2
1"
3/32"
3/4"
1/8"
9/16" 5/32"
3/8" 3/16"
Replacement Bearing: LR95005B
29
Shank
Dia
Overall
Length
1/2"
1/2"
1/2"
1/2"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
Beading Bits, Double Leaf Edge,
with Double Bearing, 2 Flutes
Part
Number
LR91275A
Cutting
Dia
Cutting
Length
1"
7/8"
Radius Shank Overall
Dia
Length
3/16"
Replacement Bearing: LR95005
1/4"
3"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Fancy Moulding Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR94106
7/8"
1-1/2"
Shank Overall
Dia
Length
1/2"
3-3/8"
R e p l ac e m e n t B ea r i n g : L R 9 5 0 0 4
Part
Number
Cutting
Dia
Cutting
Length
LR94104
1"
1-1/2"
3-1/2"
R e p lace m e n t B eari n g: L R 9 5 0 0 4
Part
Number
Cutting
Dia
Cutting
Length
LR94102
1"
1-1/2"
3-3/8"
R e p la ce m e n t B ea ri n g: L R 9 5 0 0 4
Part
Number
Cutting
Dia
Cutting
Length
LR94100
1-1/16"
1-3/4"
1/2"
LR94103
1"
Cutting
Length
1-3/4"
Shank Overall
Dia
Length
1/2"
3-3/4"
Part
Number
Cutting
Dia
Cutting
Length
LR94101
1"
1"
Shank Overall
Dia
Length
1/2"
2-7/8"
Part
Number
Cutting
Dia
LR94099
1-3/8"
Cutting
Length
1-5/8"
Shank Overall
Dia
Length
1/2"
3-1/2"
R e p la ce m e n t B ea ri n g: L R 9 5 0 0 4
Shank Overall
Dia
Length
R e p la ce m e n t B ea ri n g: L R 9 5 0 0 4
Cutting
Dia
R e p la ce m e n t B ea ri n g: L R 9 5 0 0 4
Shank Overall
Dia
Length
1/2"
Part
Number
R e p la ce m e n t B ea ri n g: L R 9 5 0 0 4
Shank Overall
Dia
Length
1/2"
Edge Forming Bits, with Bearing, 2 Flutes
3-1/2"
Part
Number
LR94098
Cutting
Dia
1-3/8"
Cutting
Length
1-5/8"
Shank Overall
Dia
Length
1/2"
3-1/2"
R e p la ce m e n t B ea ri n g: L R 9 5 0 0 4
30
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Edge Forming Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR94095
1-3/8"
1-1/2"
Shank Overall
Dia
Length
1/2"
3-3/8"
Replacement Bearing: LR95005B
Part
Number
Cutting
Dia
Cutting
Length
LR94090
1-3/8"
1-3/4"
Shank Overall
Dia
Length
1/2"
3-5/8"
Replacement Bearing: LR95004
Part
Number
Cutting
Dia
Cutting
Length
LR94092
1-3/4"
1"
Shank Overall
Dia
Length
1/2"
3"
Replacement Bearing: LR95005A
Part
Number
Cutting
Dia
Cutting
Length
LR94091
1-3/8"
1-3/4"
Shank Overall
Dia
Length
1/2"
3-5/8"
Replacement Bearing: LR95004
Part
Number
Cutting
Dia
Cutting
Length
LR94097
1-3/4"
1"
Shank Overall
Dia
Length
1/2"
3"
Replacement Bearing: LR95004
Part
Number
Cutting
Dia
Cutting
Length
LR94096
1-3/16"
1-3/8"
Shank Overall
Dia
Length
1/2"
Replacement Bearing: LR95005B
3-1/4"
Part
Number
Cutting
Dia
Cutting Radius Shank
Length
Dia
LR94083
1-9/16"
1-1/16"
5/32"
Replacement Bearing: LR95005B
31
1/2"
Overall
Length
3"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Moulding Bits, with Bearing, 2 Flutes
Cutting
Part
Dia
Number
Cutting Radius Shank Overall
Length
1&2
Dia
Length
LR94084 13/16"
LR94085 1-1/4"
LR94086 1-9/16"
19/32"
7/8"
1-3/16"
5/64"
5/32"
7/32"
1/2"
1/2"
1/2"
2-1/2"
2-3/4"
3-1/16"
Replacement Bearing: LR95005B
Part
Number
Cutting
Dia
Cutting
Length
LR94094
1-3/4"
1-1/2"
Shank Overall
Dia
Length
1/2"
3-7/16"
Replacement Bearing: LR95005B
Cutting
Part
Dia
Number
Cutting Radius Shank Overall
Length
Dia
Length
5/8"
LR94080 1-5/16"
3/16"
1/2"
2-15/16"
Replacement Bearing: LR95004
Cutting
Part
Dia
Number
Cutting Radius Shank Overall
Length
Dia
Length
5/8"
LR94081 15/16"
1-21/32" 1/4"
2-7/16"
Replacement Bearing: LR95004
Part
Cutting
Number
Dia
Cutting Radius Shank Overall
Length
Dia
Length
LR94087
LR94088
LR94089
1"
15/64"
1-3/16" 5/16"
1-9/16" 33/64"
1-1/8"
1-1/4"
1-3/8"
1/2"
1/2"
1/2"
2-7/8"
3-1/8"
3-1/2"
Replacement Bearing: LR95005B
Multi Profile Bit, with Bearing, 2 Flutes
4
3
1
2
Part
Number
Cutting
Dia
Cutting
Length
LR94050
2-1/8"
1-7/8"
Shank Overall
Dia
Length
1/2"
3-3/4"
Rad 1 = 23/64 " Rad 2 = 21/64 " Rad 3 = 21/64 "
Rad 4 = 1/4 " Replacement Bearing: LR95004
Part
Cutting
Number
Dia
LR94093
2"
Cutting Radius Shank Overall
Length
Dia
Length
1"
1/4"
1/2"
2-7/8"
Replacement Bearing: LR95004
32
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Part
Number
Bull Nose Bit Plunge Type,
with Centre Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Cutting Cutting Radius Shank Overall
Dia
Length
Dia
Length
LR94060
1-1/2"
1-3/16"
Replacement Bearing: LR95005B
LR94052
1-1/8"
1-9/16"
1/2"
1/2"
Shank Overall
Dia
Length
1/2"
3-1/8"
3-5/8"
Replacement Bearings: LR95009
Part
Number
Cutting Cutting Radius Shank Overall
Dia
Length
Dia
Length
LR94054
1-1/8"
1-9/16"
1/2"
1/2"
3-5/8"
** NO BEARING **
Moulding Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR94062
1-3/4"
1-3/16"
Shank Overall
Dia
Length
1/2"
3-3/8"
Replacement Bearing: LR95005B
3
Part
Number
Cutting
Dia
Cutting
Length
LR94056
1-1/2"
1-3/16"
2
Shank Overall
Dia
Length
1/2"
3-1/4"
Replacement Bearing: LR95006
1
Part
Cutting
Number
Dia
LR94064
Cutting
Length
Rad
1
Rad
2
1-1/8"
1/4"
3/8" 1/8"
1-5/8"
Rad
3
Shnk
Dia
O.A.L.
1/2"
3"
Replacement Bearing: LR95004
Part
Number
Cutting
Dia
Cutting
Length
LR94058
1-5/8"
1-9/16"
Shank Overall
Dia
Length
1/2"
Replacement Bearing: LR95005B
33
3-1/2"
Part
Cutting Cutting Radius Shank Overall
Number
Dia
Length
Dia
Length
LR94066
2"
1-7/32"
21/64"
Replacement Bearing: LR95004
1/2"
3-1/8"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Crown Moulding Bits, 2 Flutes
E
C
A
D
Part
Cutting Cutting Radius Shank Overall
Number
Dia
Length
Dia Length
LR94068
1-7/8"
15/16"
15/64"
1/2"
2-7/8"
Replacement Bearing: LR95004
A
C
A
B
C
D
E
Part
Number
Cutting
Dia
Cutting
Length
B
D
Part
Number
Cutting
Dia
Cutting
Length
LR94070
LR94073
LR94074
LR94072
LR94071
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
E
Shank Overall
Dia
Length
1/2"
1/2"
1/2"
1/2"
1/2"
3-3/4"
3-3/4"
3-3/4"
3-3/4"
3-3/4"
Shank Overall
Dia
Length
Multi-Radii
LR94076
2-5/16"
7/8"
1/2"
2-3/4"
Replacement Bearing: LR95004
Handrail Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
LR94077
2-1/4"
1"
Shank Overall
Dia
Length
1/2"
Replacement Bearing: LR95004
2-7/8"
Part
Number
Cutting
Dia
Cutting
Height
LR85811
2-5/8"
3/4"
Shank Overall
Dia
Length
1/2"
2-5/8"
Replacement Bearing: LR95004
34
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Handrail Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Height
LR85814
2-1/2"
25/32"
Shank Overall
Dia
Length
1/2"
2-3/4"
Replacement Bearing: LR95004
Part
Number
Cutting
Dia
Cutting
Height
LR85812
1-1/4"
1-1/2"
Shank Overall
Dia
Length
1/2"
3-3/8"
Replacement Bearing: LR95005B
Part
Number
Cutting
Dia
Cutting
Height
LR85816
2-1/2"
25/32"
Shank Overall
Dia
Length
1/2"
2-3/4"
Replacement Bearing: LR95004
Part
Number
Cutting
Dia
Cutting
Height
LR85813
1-1/4"
1-1/2"
Shank Overall
Dia
Length
1/2"
3-3/8"
Replacement Bearing: LR95005B
Part
Number
Cutting
Dia
LR85815
1-3/8"
Cutting Radius Shank Overall
Height
Dia
Length
1-1/2"
1/8"
Replacement Bearing: LR95004
35
1/2"
3-3/8"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Solid Sur face Bits
Corian
Avonite
Fountainhead
2000X
These tools have been specifically engineered for the fabrication of solid surface
materials. The soft bearing design and micrograin carbide structure of the
cutting edges provide effortless machining with exceptional tool life.
Corian is a registered trademark of DuPont.
Avonite is a registered trademark of Avonite Corporation.
Fountainhead is a registered trademark of Nevemar Corporation.
2000X is a registered trademark of For mica Corporation.
Undermount Profile Bowl Bit,
with Bearing, 2 Flutes
Part
Cutting
Number Dia
Cutting
Length
Radius Bevel
LR91440 1-3/8"
1-5/16"
15/64" 10 Deg
Bevel Hob Bit, with Bearing, 2 Flutes
Shank Overall
Dia
Length
1/2"
3-5/16"
Replacement Bearing: LR95014
Part
Number
Cutting
Dia
Cutting
Length
Radius
Shank
Dia
Overall
Length
LR91446
1-3/8"
1-27/64"
1/8"
1/2"
2-7/8"
Replacement Bearing: LR95005
Corner Rounding Bits,
with Bearing, 2 Flutes
Corner Cove Bits, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Rad
1
LR91442 1-17/32" 1-37/64" 15/64"
LR91444 1-17/32" 2-5/32" 15/64"
Rad
2
1/8"
1/8"
Shank Overall
Dia
Length
1/2"
1/2"
3-1/16"
3-11/16"
Part
Cutting
Number
Dia
LR91457
LR91458
LR91459
Cutting
Length
Rad
1-5/8" 47/64"
1/2"
2-1/8" 63/64"
3/4"
2-5/8" 1-15/64"
1"
Shank Overall
Dia
Length
1/2"
1/2"
1/2"
Bearing
2-1/16" LR95018
2-29/32" LR95019
2-1/16" LR95020
36
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
2
Rounding Over Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Radius
Shank
Dia
LR91453
LR91454
LR91455
LR91456
1-1/8"
1-1/4"
1-1/2"
2"
1/2"
5/8"
3/4"
1"
5/16"
3/8"
1/2"
3/4"
1/2"
1/2"
1/2"
1/2"
1
Undermount Bowl Bit, with Bearing, 2 Flutes
Overall
Length
Part
Cutting
Number
Dia
Cutting
Length
Radius Radius Shank Overall
1
2
Dia
Length
2-5/16"
2-7/16"
2-9/16"
2-3/4"
LR91464 2-1/4"
15/16"
13/64" 5/32"
1/2"
2-51/64"
Replacement Bearing: LR95021
Replacement Bearing: LR95012
Cove Bit, with Centre Bearing, 2 Flutes
Inverted Rounding Over Bits,
with Centre Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Radius
LR94220
LR94222
2-1/8"
2-5/8"
3/4"
1"
1/2"
3/4"
Shank
Dia
1/2"
1/2"
Overall
Length
Part
Number
Cutting
Dia
Cutting
Length
Radius
Shank
Dia
LR91448
1-1/8"
1/2"
25/64"
1/2"
Overall
Length
2-7/8"
Replacement Bearing: LR95009A
2-7/8"
3"
Replacement Bearing: LR9509A
1
2
Rounding Over Undermount Bowl Bits,
with Bearing, 2 Flutes
Part
Number
LR91460
LR91462
Cutting
Dia
2-1/8"
2-1/4"
Cutting
Length
1"
1-1/4"
Radius
1/2"
9/16"
Replacement Bearing: LR95014
37
Shank
Dia
1/2"
1/2"
Overall
Length
3-1/16"
3-5/16"
Roman Ogee Bit, with Bearing, 2 Flutes
Part
Cutting Cutting Radius Radius Shank Overall
Number
Dia
Length
1
2
Dia
Length
LR91436 1-1/8"
5/8"
1/8"
5/32"
Replacement Bearing: LR95012
1/2"
2-9/16"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Roman Ogee Undermount Bowl Bits,
with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Radius
Shank
Dia
LR91450
LR91452
2-1/8"
2-3/8"
1"
1-1/4"
1/2"
9/16"
1/2"
1/2"
Overall
Length
3"
3-3/8"
Topmounted Bowl & Countertop Bits,
with Centre Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR94224
1-1/8"
1/2"
1/2"
Overall
Length
3-1/8"
Replacement Bearing: LR95009
Replacement Bearing: LR95014
Countertop Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Radius
LR91482
LR91484
1"
1"
7/8"
1-1/8"
5/16"
5/16"
Shank
Dia
1/2"
1/2"
Overall
Length
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR94206
1-1/8"
1/2"
1/2"
Overall
Length
3-1/8"
Replacement Bearing: LR95009
2-7/8"
3-1/16"
Replacement Bearing: LR95013
Bevel Undermount Bowl Bit,
with Bearing, 2 Flutes
Corner Top Bit No Drip, 2 Flutes
Part
Number
LR91438
Cutting
Dia
1"
Cutting
Length
1/2"
Shank
Dia
1/2"
Overall
Length
2-1/8"
Part
Number
Cutting
Dia
Cutting
Length
Bevel
Shank
Dia
LR91470
1-1/4"
1"
12 Degree
1/2"
Overall
Length
3-3/16"
Replacement Bearing: LR95014
38
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Edge Cove Bit, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Radius
Shank
Dia
LR91432
1"
5/8"
5/16"
1/2"
Overall
Length
2-5/8"
Replacement Bearing: LR95013
Inlay T rimming Bits, with Bearing, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Face Inlay Bits, with Bearing, 2 Flutes
Part
Cutting Cutting
Number Dia
Length
Depth Shank Overall Bearing
Length
of Cut
Dia
LR91250
LR91252
LR91254
LR91256
LR91258
LR91260
LR91262
LR91264
LR91266
1/16"
1/8"
3/16"
1/16"
1/8"
3/16"
1/16"
1/8"
3/16"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
1/4"
1/4"
1/4"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
1/2" 3-1/16" LR95006
1/2"
3"
LR95005
3"
1/2"
LR95004A
1/2" 3-1/4" LR95006
1/2" 3-1/4" LR95005
1/2" 3-1/4" LR95004A
1/2" 3-7/16" LR95006
1/2" 3-1/2" LR95005
1/2" 3-1/2" LR95004A
Shank Overall
Dia
Length
Flush Trim, 0 Degrees
LR91477B
3/4"
1"
1/2"
3"
Replacement Bearing: LR95013
Bowl & Countertop T rim Bit, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Shank Overall
Dia
Length
Over -Hang 1/16", 5 Degree rough-out
LR91476A
3/4"
1"
1/2"
Replacement Bearing: LR95014A
39
3"
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
LR94214
2-1/16"
1/4"
1/2"
Overall
Length
3-5/16"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
T ur nover Knife Router Bits
Straight T rim Bits, No Plunge, 2 Flutes
Staggered T rim Bits, with Plunge, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
Part
Number
Cutting
Dia
Cutting
Length
Shank
Dia
Overall
Length
TK96120
TK96121
TK96122
TK96123
TK96124
18mm
20mm
22mm
3/4"
7/8"
12mm
12mm
12mm
12mm
12mm
1/4"
1/4"
1/4"
1/4"
1/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
TK96130
TK96131
TK96132
TK96133
TK96134
TK96135
TK96136
TK96137
TK96138
18mm
18mm
20mm
22mm
22mm
3/4"
3/4"
7/8"
7/8"
20mm
20mm
20mm
20mm
20mm
3/4"
3/4"
3/4"
3/4"
1/4"
1/2"
1/4"
1/4"
1/2"
1/4"
1/2"
1/4"
1/2"
2"
2-3/8"
2"
2"
2-3/8"
2"
2-3/8"
2"
2-3/8"
Replacement Parts:
Knife:
Screw:
Key:
591-1212 (12x12x1.5)
580.RH-M4067.7
582-T15F
Replacement Parts:
Knife:
Screw:
Key:
591-1212 (12x12x1.5)
580.RH-M4067.7
582-T15F
Bevel T rim Bits, with Plunge, 2 Flutes
Part
Number
Cutting
Dia
Cutting
Length
TK96105
TK96108
TK96110
TK96115
20mm
24mm
26mm
27mm
12mm
12mm
12mm
12mm
Bevel
15
25
30
45
Degree
Degree
Degree
Degree
Replacement Parts:
Knife:
Bearing
Bearing
Screw:
Key:
591-1212 (12x12x1.5)
LR95005
LR95004A (for TK96115 only)
580.RH-M4067.7
582-T15F
Shank
Dia
Overall
Length
1/4"
1/4"
1/4"
1/4"
2-1/8"
2-1/8"
2-1/8"
2-1/4"
Bevel T rim Bits, with Plunge, 2 Flutes
Part
Number
Cutting
Dia
TK96100
TK96101
TK96102
19mm (3/4")
19mm (3/4")
19mm (3/4")
Cutting Shank Overall
Length
Dia
Length
12mm
30mm
30mm
1/4"
1/4"
1/2"
Spare
Knives
2"
591-1212
2-3/4" 590-0300
3"
590-0300
Replacement Parts:
Bearing
Screw:
Key:
LR95006B
580.RH-M4067.7
582-T15F
40
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Accessories & Replacement Parts
Ball Bearings
Part
Number
Outside
Dia
LR95001
1/4"
LR95002
3/8"
LR95000
3/8"
LR95004
1/2"
LR95004A
1/2"
LR95004B
.488"
LR95003
1/2"
LR95005E
14mm
LR95005C
14mm
LR95005
5/8"
LR95005A
5/8"
LR95005D
16mm
LR95005B
16mm
LR95006
3/4"
LR95006A
3/4"
LR95006C
3/4"
LR95006B
19mm
LR95008
7/8" (22mm)
LR95008D
7/8"
LR95008F
22mm
LR95008A
26mm
LR95008E
1"
LR95009
1-1/8"
LR95009B
1-1/8"
LR95010
28mm
LR95010A
1-7/32"
LR95017
1-1/4"
LR95017A
1-1/4"
LR95010C 1-5/16" (33.5mm)
LR95010B
1-3/8"
LR95011
35mm
LR95008B
1-1/2"
LR95008C
2"
41
Ball Bearings Guide Assemblies
Inside
Dia
Thickness
1/8"
1/8"
3/16"
3/16"
1/4"
3/16"
1/8"
8mm
7mm
1/4"
3/16"
8mm
5mm
1/4"
3/16"
1/2"
6mm
5/16" (8mm)
3/16"
7mm
10mm
15mm
1/2"
3/16"
5/16" (8mm)
5/16" (8mm)
15mm
8mm
5/16" (8mm)
3/16"
15mm
15mm
15mm
7/64"
5/32"
1/8"
5mm
3/16"
5mm
11/64"
4mm
5mm
5mm
5mm
5mm
5mm
9/32"
3/16"
5/32"
6mm
7mm
6.6mm
7mm
8mm
5.5mm
5/16"
6.6mm
9mm
8.6mm
8.5mm
5mm
8.6mm
6.6mm
11mm
8.5mm
12.5mm
Ball Bearings with Teflon sleeves for routing
solid surface materials such as Corian.
Part
Number
Outside
Dia
Inside
Dia
Taper
LR95012
LR95013
LR95014
LR95014A
LR95018
LR95019
LR95020
LR95021
LR95022
LR95023
LR95009A
LR95025
LR95026
LR95027
LR95016
1/2"
3/4"
7/8"
7/8"
21.4mm
19.4mm
18.5mm
25mm
27mm
28mm
1-1/8"
29mm
34mm
40.8mm
43mm
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
5/16" (8mm)
15mm
5/16" (8mm)
5/16" (8mm)
5/16" (8mm)
5/16" (8mm)
0
0
10 Degrees
5 Degrees
1/2" Radius
3/4" Radius
1" Radius
5 Degrees
0
0
0
0
0
0
0
Arbors (Includes Nut & 2 Spacers)
Part
Number
Spindle
Dia
Spindle
Length
Shank
Dia
Overall
Length
LR95100
5/16"
LR95102
5/16"
LR95104
5/16"
LR95103
5/16"
LR95105
5/16"
LR95105A
5/16"
LR95105B
5/16"
LR95105C
5/16"
LR95105D
5/16"
LR95110*
*for CNC Routers
7/8"
1-7/16"
1"
1-5/16"
1-3/8"
2-1/8"
1-1/2"
2-5/8"
1-3/4"
1/4"
3/8"
1/2"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
2-3/8"
3"
2-3/8"
2-5/8"
3"
3-3/4"
3-1/8"
4-1/4"
3-5/16"
2"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Raised
Arbors (for Mortise Bits)
Part
Number
LR95106
LR95107
LR95108
LR95109
Thread
Size
1/4-28
5/16-24
1/4-28
5/16-24
Shank
Dia
Overall
Length
1/4"
1/4"
1/2"
1/2"
2"
2"
2"
2"
Thread
Thread
Thread
Thread
Flat
Spring
Lock
Washers
Part
Number
Outside
Dia
Inside
Dia
Thickness
3/8"
1/2"
16mm
1/8"
3/16"
5mm
1.3mm
1.3mm
0.8mm
5/16"
12mm
3/8"
3/16"
8mm
1/4"
1.2mm
1.0mm
1.4mm
3/16"
1/4"
3/8"
7/64"
1/8"
3/16"
1/64"
1/64"
1.0mm
3/8"
1/2"
0.8mm
1.0mm
Raised
LR95200
LR95202
LR95204
Flat
LR95206
LR95207
LR95208
Spring
LR95250
LR95252
LR95255
Shank Adapters
Lock
Part
Number
Outside
Dia
Inside
Dia
Overall
Length
1/8"
3/16"
1/4"
5/16"
3/8"
1"
1"
1"
1-1/4"
1-1/2"
1/4"
3/8"
1/4"
1"
1"
1-1/4"
LR95256
LR95257
Fibre Adapters
ON3301
ON3302
ON3303
ON3304
ON3305
1/4"
1/4"
1/2"
1/2"
1/2"
Steel Adapters
ON3400
ON3405A
ON3403
3/8"
1/2"
1/2"
Lock Rings
Part
Number
Outside
Dia
Inside
Dia
LR95275
LR95276
LR95277
LR95278
11mm
16mm
21mm
18mm
1/4"
3/8"
1/2"
1/2"
Spacers
Part
Number
Outside
Dia
Inside
Dia
Thickness
LR95300
LR95301
LR95302
LR95303
LR95304
LR95305
LR95306
LR95307
LR95308
LR95310
LR95311
LR95309
5/8"
12mm
5/8"
12mm
5/8"
12mm
5/8"
5/8"
16mm
1/2"
5/8"
5/8"
5/16"
8mm
5/16"
8mm
5/16"
8mm
5/16"
5/16"
5/16"
1/4"
5/16"
5/16"
.05mm
0.1mm
0.1mm
0.2mm
0.5mm
0.5mm
1.0mm
3.0mm
3.4mm
5.0mm
5.5mm
6.0mm
Nuts
Part
Number
Size
LR95400
NF5/16
42
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Allen Keys
Part
Number
Size
582-KEY-M1.3
582-KEY-M1.5
582-KEY-M2.0
582-KEY-M2.5
582-KEY-M3.0
582-KEY-M4.0
582-KEY-M5.0
582-KEY-1/8"
582-KEY-3/16"
582-KEY-3/32"
1.3mm
1.5mm
2.0mm
2.5mm
3.0mm
4.0mm
5.0mm
1/8"
3/16"
3/32"
Screws
43
Part
Number
Type
Size
580.HC-#01
580.HC-#02
580.HC-#03
580.HC-#04
580.HC-#05
580.HC-#06
580.HC-#07
580.HC-#08
580.HC-#09
580.HC-#10
2/56
3/48
3/48
3/48
5/40
5/40
5/40
10/32
10/32
6/40
.082"
.099"
.099"
.099"
.125"(1/8")
.125"(1/8")
.125"(1/8")
.187"(3/16")
.187"(3/16")
.135"
Thread
Length
1/4"
1/4"
3/8"
1/2"
1/4"
3/8"
1/2"
1/4"
1/2"
1/4"
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
PCD
Polycrystalline Diamond
Polycrystalline diamonds produced through technologically advanced
techniques of high-pressure and high-temperature, are the hardest
man-made material known. When used in place of tungsten carbide
tips in routers and other wood cutters, polycrystalline diamonds
allow higher material removal rates while retaining sharp cutting
edges for extended time and use periods. Royce diamond tools last
up to 300 times longer than conventional carbide bits thus providing
an economical solution to the problems of producing high-volume
output on woods as well as on very abrasive materials and laminates.
Diamond tools for the woodworking
industry -higher efficiency, greater
economy, faster and cleaner cutting!
Shank type router bits and form cutters
... for routing of all woods - hard and soft - as well as
highly abrasive plastics, laminates, fiberglass, plywood,
chipboard, MDF and HDF.
44
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Notes:
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Notes:
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
Notes:
All tools offered from stock are subject to availability. The buyer agrees to partial
deliveries which will be considered separate transactions. Cancellation or alteration of
orders are subject to our written consent. Returns will only be accepted upon written
prior approval and the assignment of an authorized return number. Custom tools made
to special order are not returnable.
Delivery lead time is based on production scheduling and material availability, and
starts from date of order confirmation. Every effort will be made to fulfill delivery
commitments. Any delay, for any reason, will not be liability for any loss or damage.
GUARANTEE
All our tools are manufactured according to specifications described in this catalogue.
Tools suspected to be defective and returned for inspection are to be shipped prepaid.
We will only replace tools which prove, upon our examination, to have material and/or
manufacturing defects. Tools that have been misused or carelessly handled are not
guaranteed. We do not accept any responsibility or liability for mistakes caused by
improper application, handling, or inappropriate sharpening. We reserve the right to
change specifications from those published in this catalogue as part of our continual
product improvement process.
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND