Power-Wedge® Cog-Belt
Transcription
Power-Wedge® Cog-Belt
Power-Wedge® Cog-Belt® Heavy Duty V-Belts Performance Driven. Performance Proven. ™ The EPDM Power-Wedge® Cog-Belt® by Timken is specially designed for optimum performance: Durable Oil and heat resistant ■■ Static conductive ■■ Resists hardening and glazing ■■ 60% broader operating temperature range ■■ Made in the USA ■■ Energy efficient ■■ Built to Chek Mate® belt tolerances for a matched set ■■ Backed by “Ironclad Guarantee” ■■ ■■ www.carlislebelts.com Power-Wedge® Cog-Belt® Performance Driven. Performance Proven. Our Power-Wedge Cog-Belt is designed for optimum performance. High horsepower ratings translate into greater design flexibility – reducing drive cost, space and weight. The narrow profile permits reduced drive widths and a smaller drive envelope. ® 1 High-Modulus Cords Carries high horsepower loads with minimum stretch. Better belt stability. Fewer take-up adjustments. ® 1 Raw edge construction contributes to outstanding operating efficiency. More torque with little or no slippage. The result is savings – in time, in belt life and in energy costs. 2 Precision Molded Cogs Improves belt flex, reduces bending stress. Helps dissipate heat and requires less power. Improves flexibility for increased performance on small diameter pulleys. 2 3EPDM EPDM offers superior flex and load carrying capacity. It resists belt cracking and won’t stretch. EPDM has excellent flexibility at high and low temperatures. The Power-Wedge Cog-Belt meets ARPM standards for static conductivity as well as oil and heat resistance. 3 The Power-Wedge Cog-Belt is available in 3VX, 5VX, and 8VX cross sections as well as metric sizes SPZX, SPAX, SPBX, and SPCX. Where applicable, belts are dual branded with imperial and metric part numbers. Horsepower Ratings Comparison Horsepower Rating Comparison 4 Power-Wedge Cog-Belt HP 3/8” 3VX 40 4 Raw Edge Sidewalls Produces a higher coefficient of friction. Keeps a tighter grip on the pulley to reduce slippage. Improves performance and efficiency. Reduces vibration for extended component life. 5/8” 5/16” 5VX 17/32” Metric Power-Wedge Cog-Belt 9.7mm 1” SPZX 8VX 7/8” 8.0mm 12.7mm 16.3mm SPAX 10.0mm SPBX 13.0mm 22.0mm SPCX 18.0mm 30 20 10 0 Power-Wedge Cog-Belt Conventional V-Belt 5V Section Drive, 750 RPM, 1.5.1 Belt Drive Ratio Recommended Pulleys: Hi-Cap Wedge – QD, Taper Bushed, or MST (3V, 5V, 8V) The Timken team applies their know-how to improve the reliability and performance of machinery in diverse markets worldwide. The company designs, makes and markets high-performance mechanical components, including bearings, gears, chain, belts and related mechanical power transmission products and services. www.carlislebelts.com 5M 05-16: 29 Order No. 10901 | TIMKEN is a trademark of The Timken Company. CARLISLE is a trademark used under license. | © 2016 The Timken Company | Printed in U.S.A. The Power-Wedge® Cog-Belt® combines the advantages of narrow belt wedge design with raw edge performance for maximum operating efficiency in a compact drive package. The Power-Wedge Cog-Belt by Timken is now made of EPDM (Ethylene Propylene Diene Monomer), a synthetic rubber with outstanding properties.