Stauff Hydraulic Accessories—Return Line Bushings, SRF Series

Stauff Hydraulic Accessories—Return Line Bushings, SRF Series

Return Line Bushings, SRF Series
Dimensions
Specifications
• Material: Santoprene
d2
• Diameter: 1/4" to 1-1/2"
d1
• Compatible with Most Hydraulic Fluids
• Packaged in Bags of Ten
Ordering Information
SRF
XX
A
Return Line Bushing
1/4" T
-
C
Material
Santoprene
SA
Dia O
/ d1
Tube Dia.
SA
3/8"T 1/8"P 1/2" T1/4" P
-
5/8" T
-
B
d3
Mounting bore
3/4" T
7/8" T
1" T
-
-
-
1 1/2" T 1 1/4" P
Ød1 6 8 10121415161820222528 30353842
mm in mm in mm inmm
in mm in mm in mm in mm in mm inmminmmin mm in mmin mm in mm in mm in
d2
18 0.71 20 0.78 22 0.86 24 0.94261.02281.10 281.10 301.18 321.25341.33381.49411.61 43
1.69 481.88 51 2 .00 55 2.16
d3 10 0.39 120.47 140.55 16 0.63180.71 200.78 200.78220.86240.94 261.02 331.29 331.29351.37 401.57 43 1.69 47 1.84
A
0.16" - 0.5"
/4 - 12mm
B 0.9"
/
C
0.16"
/
23mm
4mm
SAE Half Coupling Weld Adaptors - SWF Series
Specifications
Dimensions
• Female SAE Thread to Weld Boss
45˚
• Manufactured from C1018 Cold Rolled Steel
THD
• Oil Coated for Corrosion Resistance
• Labor and Time Saving
• A
dditional Sizes and Materials Available upon Request
1/8"
D
L
Ordering Information
PART NO.
FEMALE SAE
THREAD mm
D
L
in
mm
in
SWF-069/16"-1822.0
0.87517.70.700
SWF-083/4"-1628.5
1.12521.60.850
SWF-107/8"-1434.9
1.37524.10.950
SWF-1211/16"-1234.9
1.37524.10.950
SWF-1615/16"-1241.2
1.62527.91.100
SWF-2015/8"-1253.9
2.12527.91.100
SWF-2417/8"-1263.5
2.50027.91.100
SWF-3221/2"-1276.2
3.00030.41.200
­A43
ACCESSORIES
Options
Suction Flanges SF Series
Specifications
• Designed to seal suction lines passing through the top
plate of reservoir
• Allows access for easy removal of suction elements for
inspection and cleaning
• Includes top plate, bottom plate, gasket, rubber bushing
and 4 x 5/16-18 thread forming screws
• Steel Plate
• Buna-N Seals
Part No.SF-050SF-075 SF-100 SF-125 SF-150SF-200SF-250 SF-300
Nominal
Pipe Size
1/ "
2
3/ "1"11/ "11/ "2"21/ "3"
4
4
2
2
Dimensions
Dimensions in inch (mm)
7.50 (190.5) Square
5.25 (133.4) Square
4.25 (108.0) Square
A
6.25 (158.8) Square
A
Stiffening
Ribs
Stiffening
Ribs
5.50 (139.7)
1.00 (25.4) x 0.40 (10.2) Slot
Type 4 PL.
SF 50 - 200 Top Plate Detail
B
ACCESSORIES
Bottom Plate
(without ribs)
Gasket
Part
No.
4 x 5/16" - 18 UNC. Screw
x 0.75 (19.0) LG.
Self Tapping Bolts
.87 (22.2) x 0.44 (11.1) Slot
Type 4 PL.
Top Plate
(with ribs)
SF 250 - 300 Top Plate Detail
Top Plate
(with ribs)
B
Bottom Plate
(without ribs)
Gasket
Rubber Gromet
Rubber Gromet
3.38 (85.7)
Min. Hole Diameter
5.25 (133.4)
Min. Hole Diameter
SF 50 - 200 Assembly
SF 250 - 300 Assembly
A
B
DimensionDimension
Part
No.
mmin mmin
4 x 5/16" - 18 UNC. Screw
x 0.75 (19.0) LG.
Self Tapping Bolts
A
B
DimensionDimension
mmin mmin
SF-05038
11/220
0.8
SF-25076
370
23/4
SF-07538
11/225
1.0
SF-30095
33/489
31/2
SF-10038
11/230
1.2
SF-12551
241
1.6
SF-15051
246
1.8
SF-20064
21/258
2.3
­A44
Reservoir End Covers EC Series
Specifications
•7 Gauge Steel Pickled and Oiled
•No Leak, Molded, One Piece Buna-N Double Lip Gasket
•Supplied with Nylon Crush Washer and Gasket
•EC-6 Supplied with Back Mounting Bracket
Options
•Available with 3/4” Drain (Excludes EC-6)
•End Cover Mounting Brackets Available for EC-10 to EC-18 inclusive
•Baffle Adaptor Available
•Stainless Steel Available upon Request
Seal Kit
Standard End Covers
H
Hole Size
D
(Contains double lip buna seal and nylon crush washer)
Part Number
Description
EC-10-SK
Seal and washer for EC-10/EC-10D
EC-12-SK
Seal and washer for EC-12/EC-12D
EC-14-SK
Seal and washer for EC-14/EC-14D
EC-16-SK
Seal and washer for EC-16
EC-18-SK
Seal and washer for EC-18/EC-18D
7 GA.
Standard End Covers
Plain End
Cover Kit
Part Number
End Cover
w/Drain Hole
Part Number
Diameter
Hole Size
Weight
D
H
mminmmin mmin kglb
EC-6—146
5.75331.31211.1.4381.2
2.5 lbs.
EC-10EC-10D254
1044.51.7517.4.6872.1
4.5 lbs.
EC-12
EC-12D308
12.12544.5 1.7517.4.6873.0
6.5 lbs.
EC-14
EC-14D359
14.12544.5 1.7517.4.6873.9
8.5 lbs.
EC-16
—410
16.12544.5 1.7517.4.6874.8
10.5 lbs.
EC-18EC-18D460
18.12551 2.0017.4.6876.2
13.5 lbs.
­A45
ACCESSORIES
Reservoir End Covers (cont.)
Mounting Arrangements
Baffle Adaptor
End Cover Bracket
EC-6
Reserve Baffle
Baffle Adaptor (SBA-10)
3/8" - 16UNC x 38.1 (1.50) Bolt
Bolt
114.3 (4.50)
Max. opening in tank should be 2"
less than cover O.D.
Nylon Crush Washer
(SBA-CW)
Nylon Crush Washer
Baffle Pin (SBA-P)
Gasket
Back Mounting Bracket
Part Number
Description
SBAB-10
Mounting Bolt for EC-10 & EC-12
5
SBAB-14
Mounting Bolt for EC-14 5
SBAB-18
Mounting Bolt for EC-18 5
SBA-10
/8" - 11 x 2"
/8" - 11 x 2 1/2"
Baffle Adaptor
SBA-P
/8" - 11 x 1 1/2"
Baffle Pin
SBA-CW
Nylon Crush Washer
Dimensions in mm (inch)
End Cover Brackets (EC-10 to EC-18 inc)
Baffle Adaptor
79.4 (3.13)
44.5 (1.75)
A
28.6 (1.13)
B
3.0 (0.12)
57.2 (2.25)
ACCESSORIES
2 x 9.5 (0.37) x 19.0 (0.75)
Slot Thru
5/8" - UNC11 Thru
22.2 (0.88)
28.6 (1.13)
9.5 (0.37)
5/8" – 11 UNC x 39.7 (1.56)
50 x 9.5
(2 x 0.37) THRU
End Cover Brackets (Required when baffle adaptor is not used; includes bracket and 2 weld on clips)
Part Number
End Cover
Access Hole
A
B
Bolt Size Required
DiameterDiameter
mminmmin
Weight
kglb
SBR - 1010"8"305
12254 105/8"-11 x 21/2"1.2
2.5 lbs.
SBR - 1212"10"356
14305 125/8"-11 x 21/2"1.4
3 lbs.
SBR - 1414"12"413
16.25362 14.255/8"-11 x 21/2"1.4
3 lbs.
SBR - 1616"14"464
18.25413 16.255/8"-11 x 21/2"1.8
4 lbs.
SBR - 1818"16"514
20.25464 18.255/8"-11 x 23/4"1.8
4 lbs.
­A46