Ubas System, Multifunctional Subsea ROV Baskets
Transcription
Ubas System, Multifunctional Subsea ROV Baskets
Underwater Design & Equipment Company UDECO AS HFL and Jumper Installation Ubas Multifunctional Subsea ROV Basket System Doc. No.: IN-UDE-180-DS-010, Rev. 01 The Multifunctional Ubas ROV Basket System includes a number of different types of ROV baskets. These baskets are available in their standard configuration, or they can be re-configured for Hydraulic Flying Lead, HFL, and Jumper deployment and installation. o Suited for shorter HFL’s / Jumpers. Typically 45-50m long. Ubas B ROV Basket with hinged down sides will accommodate an approx. 60-65m long jumper. o The basket includes a single cylinder Ubag placed opposite the MQC panel for balancing purposes. Ubas G - HFL Basket General o Low cost deployment and installation alternative. o All required equipment available on short notice, one or several basket units. o For basket selection and configuration, see Flying Lead Installation - Basket configuration and selection guide. o MQC parking panels and stands will be mounted onto the basket prior to delivery. See ROV Basket Panel & Stands Datasheet. o Supplier specific and generic MQC parking receptacles are available. o Low cost, fast installable Ufists (Monkey Fists) for basket and seabed handling of the HFL / jumper are available. These includes anti-slip attachment straps and temporary shortening rings. See Ufist – Engineered ‘Monkey Fist’ System Datasheet. o Alternative 1: The baskets are provided with a vertical o o o o If requested Udeco perform loading including pull-out test of HFL & Jumpers. o In case of rock-dumping or concrete mattress placement after HFL / jumper installation, the jumper can be provided with the Uzip protection / separation sleeve that is wrapped around hoses and similar prior to the installation of the outermost spiral guard. o ‘Soft’ Ubag mattresses (multi-cylinder bags) is also available for jumper stabilisation / protection application. See Ubag B, Two and Multi Cylinder Bag Datasheet. o mounted bolt-on MQC panel that includes the MQC parking receptacles, ROV grabbers and marking (1 or 2 panels – Panel as on Ubas A & B). Alternative 2: The baskets are provided with a vertical mounted bolt-on MQC parking stands that include the MQC parking receptacles, ROV grabbers and marking (1 to 4). The stands can be laid down for transport and/ or basket stacking. Panel and stands can be positioned on the basket to suit the subsea operation / basket landing position and orientation. Suited for longer HFL’s / Jumpers, typically up to 110m long (i.e. dependent on jumper diameter). Alternatively, it can contain two shorter jumpers. Can also be provided with compartments for combined HFL and EFL/OFL installation. Ubas F - HFL Basket Ubas A & B HFL - Baskets o Purchase basket for HFL installation, stackable. o Includes 2 off MQC parking stands o Suited for longer HFL’s / Jumpers, typically up to 220m long. Contacts o The baskets are provided with a vertical mounted bolton MQC panel that includes the MQC parking receptacles, ROV grabbers and marking. Udeco AS Mekjarvik 2 N-4073 Randaberg, Norway Switchboard: + 47 51 41 61 00 E-Mail: [email protected]
Similar documents
Ubas System, Multifunctional Subsea ROV Baskets
Bolt-on conversion equipment available Configured to client requirements General Purpose Work Baskets Test Manifold Basket with valve panel and instrumentation Hydraulic Package Basket with valve p...
More information