CELAL STOP .indd

BARRIER PRODUCT GROUP
BARRIER PRODUCT GROUPS
ROAD BLOCKER
PRACTICAL PARKING LOT BARRIERS, PARKING LOT
and ROAD REGULATION ELEMENTS
• www.stopbariyer.com • www.stopgrup.com
■ HYDRAULIC RISING BOLLARD
(HYDRAULIC UNIT IN ITSELF)
This is technical constructional component with a protective chamber that can be
placed below ground, that can enter inside this chamber and, if required, can be
raised to the surface with a desired height; with stainless steel or electrostatic
painted body; incorporating all the system within its chamber (without external unit);
working with 220V mains voltage and hydraulic oil pressure; with electromechanical
parts and that can be controlled with a remote control.
RISING BOLLARD USAGE AREAS
They are used in sensitive areas requiring security,
entrances of public and private institutions and
organizations, building complexes, hotel and parking lot
entrances, and in residential areas for the purpose of
regulating vehicle and pedestrian traffic.
Technical Specs
Supply Voltage
Engine Voltage
Motor Engine Power
Per operation, min./max.
Drive System
Lifting Piston
It is contained in the
hydraulic unit and operated
with only electrical
connection. Moving part is in
274 mm diameter coated
with 2 mm CR304 stainless
steel and the main body is in
324 mm diameter. Moving
parts stroke in standard
productions is 500 mm.
Hydraulic Hose
20/180
Hydraulic
50x600x20
R2 (Double helix) 400 Bar
46
Operation Durableness
100%
Operation Ambient
Temperature
Protection Class
-20+55
Impact Resistance
K4 Medium Security
Pace
Package Dimensions
Hydraulic Unit Cabinet
They are produced in genuine
220 V 50 Hz
0.75/1.5/2.2/3 /4 /5.5
Hydraulic Oil Number
Safety System
STOP HMB+KP
220 V 50 Hz
Body
Moving Barrier Part
Coating
55
3/8
For single barrier, 820 x 400 x 400 mm
Loop sensor, safety photocell, LED light
600 x 900 x 1000 (Diameter x width x height)
273 mm diameter ST37 mm steel
220 mm dia. ST4414 mm steel top 2 mm CR304 sta. steel
All products galvanized, moving barrier galvanized coated with 2
Assembly
mm CR304 stainless steel
Gravel on the base, and surrounding concrete montage
Controls
Micro-processor card, remote control and receiver
Warranty Duration
2 years
■ HYDRAULIC RISING BOLLARDS
(EXTERNAL HYDRAULIC UNIT)
This is technical constructional component with a protective chamber that can be
placed below ground, that can enter inside this chamber and, if required, can be
raised to the surface with a desired height; with stainless steel or electrostatic
painted body; working with 220V mains voltage and hydraulic oil pressure; with
electromechanical parts and that can be controlled with a remote control.
Technical Specs
Supply Voltage
Engine Voltage
Motor Engine Power
Per operation, min./max.
Red LED light is waterproof with 30 mmwidth. Over it, there are 3 mm thick
plexiglass and 1 mm thick stainless steel
circle and any writing can be written on
it.
Its unit is a barrier system located within
a separate cabinet. Moving part is in 220
mm diameter, 14 mm thickness and with
500 mm stroke lenght.
Drive System
Lifting Piston
Hydraulic Hose
20/180
Hydraulic
50x600x20
R2 (Double helix) 400 Bar
46
Operation Durableness
100%
Operation Ambient
Temperature
Protection Class
-20+55
Impact Resistance
K4 Medium Security
55
3/8
Package Dimensions
For single barrier, 820 x 450 x 450 mm
Safety System
Loop sensor, safety photocell, LED light
Hydraulic Unit Cabinet
Body
They are produced in genuine designs
220 V 50 Hz
0.75 (within each barrier unit)
Hydraulic Oil Number
Pace
STOP HMB-KP
220 V 50 Hz
Moving Barrier Part
Coating
None (Hydraulic unit is within the unit)
324 mm diameter ST37 mm steel
273 mm dia. ST4414 mm steel top 2 mm CR304 sta. steel
All products galvanized, moving barrier galvanized coated with 2
Assembly
mm CR304 stainless steel
Gravel on the base, and surrounding concrete montage
Controls
Micro-processor card, remote control and receiver
Warranty Duration
2 years
■ PNEUMATIC RISING BOLLARD
This is technical constructional component with a protective chamber that can be
placed below ground, that can enter inside this chamber and, if required, can be
raised to the surface with a desired height; with stainless steel or electrostatic
painted body; working with 220V mains voltage and air pressure; with
electromechanical parts and that can be controlled with a remote control.
Technical Specs
Supply Voltage
Red LED light is waterproof with 30 mmwidth. Over it, there are 3 mm thick
plexiglass and 1 mm thick stainless steel
circle and any writing can be written on it.
Its unit is a barrier system located within a
separate cabinet. Moving part is in 220
mm diameter, 14 mm thickness and with
500 mm stroke lenght.
STOP PMB
Various sizes can be produced.
220 V 50 Hz
Compressor Voltage
220 V 50 Hz
Compressor Air Tank
50 /100 /100 /200 /200 /200
Per operation, min./max.
20/180
Drive System
Pneumatics
Lifting Piston
63 x 500
Pneumatic Hose
8x10Polyamid
Working Durableness
100%
Working Ambient Temperature
-20+55
Protection Class
55
Impact Resistance
K4 Medium Security
Pace
3/8
Package Dimensions
For single barrier, 820 x 400 x 400 mm
Manual System
Available in the unit
Safety System
Loop sensor, safety photocell, LED light
Hydraulic Unit Cabinet
600 x 1300 x 1000 (Diameter x width x height)
Body
273 mm diameter ST37 mm steel
Moving Barrier Part
220 mm dia. ST4414 mm steel top 2 mm CR304 sta. steel
Coating
Whole product is galvanized, moving barrier over galvanized body
Assembly
2 mm CR304 stainless steel, Gravel on the base,
Controls
concrete assembly around
Micro-processor card, remote control and receiver
Warranty Duration
2 years
■ MANUAL KEYED RISING BOLLARD
This is technical constructional component with a protective chamber that can be
placed below ground, that can enter inside this chamber and, if required, can be
raised to the surface with a desired height; with stainless steel or electrostatic
painted body; and that can be controlled with a key placed on it.
Flange and bollard
covers are made of Etial
160 aluminum.
hen activated with a key, the
barrier rises by gaseous piston
included within the system.
When barrier is prompted to
close, it is locked by pushing
back by foot.
Bollard part consists of 170 mm
diameter and 5 mm thickness CR304
stainless steel.
The body part is 273 mm in
diameter and its surface is hot-dip
galvanized
eflective band or red LED light can be
mounted as for safety on the bollard.
STOP MMB
They are produced in genuine
designs and dimensions.
www.stopbarier.com .com
Technical Specs
Drive System
Gas spring
Lifting Piston
27 x 600 x10(500N)
Working Durableness
Working Ambient
Temperature
Protection Class!
-20+55
Impact Resistance
K4 Medium Security
96100
55
Pace
2/4
Package Dimensions
820 * 400 * 400 mm
Manual System
Safety System
When the lock is opened, moving part is raised with gas pressure. By
applying pressure by foot, the system is locked back.
Honeycombed reflective band over stainless satinette
Flange and Barrier Cover
Etial 160 Aluminum
Body
273 mm diameter, with surface hot-dip galvanized
Moving Barrier Part
750x170x5 mm CR304 stainless
Coating
Body hot-dip galvanized, moving part from CR304 sta. steel
Assembly
Gravel on the base, and surrounding concrete montage
Controls
Square lock keyed
Warranty Duration
2 years
FIXED BARRIERS FOR HIGH SECURITY
Fixed barriers used for high security; these are special products developed for
sensitive areas in public areas with high security needs. For these products to
ensure expected efficiency, their stainless steel bodies of 14 mm thickness are
filled with concrete and the product is made more strong and powerful.
These are special materials that provide security without preventing pedestrian
traffic and that add value to any place they are located.
These are preferred in prestigious buildings and they have a quality to serve for
aesthetic needs of these structures.
Technical Specs
Working Durableness
100%
Impact Resistance
K12 high security
Package Dimensions
1000 x 600 x 600 mm
Average Package Weight
250 kg
Safety System
Reflective Band
Barrier Cover
Modular to allow concrete filling
Body
ST44 steel, 1000x220x12 mm (can be manufactured as modular)
Coating
In the case of a possible damage,
bollard section can be produced in
modular shape to turn barrier into
old shape and applying this in
short time and easily. If desired,
CR304 stainless steel over hot dip
galvanized can be produced
optionally covered by electrostatic
paint.
CR304 stainless steel over hot dip galvanized can be produced
Assembly
optionally covered by electrostatic paint.
Concrete Mounted on Ground
Warranty Duration
2 years
Top section of the
barrier is produced
with modular
covered to fill with
concrete when
required.
STOP YGSB K
STOP YGSB D
Square and round shaped flange
production can be made. Quantity
and shape changes can be applied
on wings to be buried in concrete.
■ FIXED BARRIERS
These are barriers used for the purpose of controlling vehicle traffic without preventing
pedestrian traffic where there are no high security needs.
Productions in various size, diameter, scale, body and paint options are available based
on customers demands.
STOP BSB KF
Technical Specs
Working Durableness
100%
Impact Resistance
K4 medium security
Package Dimensions
500x150x150 mm
Average Package Weight
25 kg
Safety System
Reflective tape
Flange and Barrier Cover
250 mm dia. /250 x 250 mm square flange, domed barrier cover
Coating
500x114x4 mm ST44 steel
Body
Hot-dip galvanized electrostatic paint
Assembly
Floor-mounted steel dowels
Warranty Duration
2 years
STOP BSB
Technical Specs
Working Durableness
100%
Impact Resistance
K4 medium security
Package Dimensions
500x120x120 mm
Average Package Weight
15 kg
Safety System
Reflective tape
Flange and Barrier Cover
Body
Assembly
Warranty Duration
STOP PSB YAF
CR304 stainless
500x120x2 mm CR304 steel
Mounted on concrete floor with concrete insert,
Or embedded assembly by producing without flange
2 years
Technical Specs
Working Durableness
100%
Impact Resistance
K4 medium security
Package Dimensions
500x250x250 mm
Average Package Weight
25 kg
Safety System
Led light or reflective tape
Flange and Barrier Cover
CR304 stainless
Body
500x170x5 mm CR304 stainless
Assembly
Lower flanged and anchored by steel dowel
Warranty Duration
2 years
STOP PSB YF
Technical Specs
Working Durableness
100%
Impact Resistance
K4 medium security
Package Dimensions
500x250x250 mm
Average Package Weight
35 kg
Safety System
Reflective tape
Flange and Barrier Cover
CR304 stainless
Body
500x170x5 mm CR304 stainless
Assembly
Lower flanged and mounted by anchorage
Warranty Duration
2 years
/\
■ COMPOSITE BORDER ELEMENTS
These are type of barriers used to prevent or regulate vehicle traffic without blocking pedestrian traffic. These barriers are structure elements
with important functions from the point of decoration of the city along with their technical specs. Composite fixed barriers can be produced in
various types and dimensions to ensure decorative integrity with intended use, natural state of application area and characteristics of other
structures in the application site.
STOP KB LED
STOPKBNOl ST0PKBNQ2
STQPKBN03
STQPKBN04
STQPKBN05
STQPKBN06
STOP KB N
Composite Border Elements are economic structural
elements that are produced from materials with no
scrap value, resistant to external weather conditions,
thermal dynamics and impacts with electrical
resistivity. These products are also available in
models with solar led lamps flashing 70 times per
minute to acquire night visibility and warning feature.
PLASTIC BORDER ELEMENTS
STOP D 32 THERMOPLASTIC
FLEXIBLE BARRIER 32 CM
STOP DS 30
FLEXIBLE DELINEATOR 30
STOP D55 THERMOPLASTIC
FLEXIBLE BARRIER 45 CM
STOP DS 45
CMFLEXIBLE DELINEATOR 45
STOP L50 Y
ROUND PLATE
STOP RB 50 FLEXIBLE REFUGE
HEAD SIGN (WITH REFLECTIVE)
STOP D 75 THERMOPLASTIC
FLEXIBLE BARRIER 75 CM
STOP DS 75
CMFLEXIBLE DELINEATOR 75CM
STOP L50 U / STOP L50 D
TRIANGLE / RECTANGULAR PLATE
STOP KZ 50 SLIPPERY GROUND
WARNING SIGN
■
ROAD BLOCKER
These are technical structure elements that can be used in main and secondary entrances of places requiring high security, that contribute to
security in real sense with its deterrent effect, work by hydraulic oil pressure, with steel body and electro mechanic sections and that can be
controlled by remote control and if required manually.
• Uses:
Military bases, police departments, judiciary facilities, facilities with strategic importance, private organizations requiring high security etc.
SBRB3
3 Meter long
hydraulic road blocker
SB R B 4 M
4 Meter long
hydraulic road blocker
SBRB5M
5 Meter long
hydraulic road blocker
Body Structure
ST 912 Steel
Moving Part
St44Sac (12mm)
Opening and Closing Order
3-8 sec.
Operating Voltage
380 V 50-60 Hz
Operational Temperature
25. +60°C
Operating Voltage
4kW
Working Frequency
Daily 500 rounds
Protection Class
IP55
Impact Resistance
Ki 2-high security
Surface Coating
Electrostatic paint, on hot dip galvanization.
Body Structure
ST 912 Steel
Moving Part
St44Sac (12mm)
Opening and Closing Order
3-8 sec.
Operating Voltage
380 V 50-60 Hz
Operational Temperature
25. +60°C
Operating Voltage
4 kW
Working Frequency
Daily 500 rounds
Protection Class
IP55
Impact Resistance
Ki 2-high security
Surface Coating
Electrostatic paint, on hot dip galvanization.
Body Structure
ST 912 Steel
Moving Part
St44Sac (12mm)
Opening and Closing Order
3-8 sec.
Operating Voltage
380 V 50-60 Hz
Operational Temperature
25. +60°C
Operating Voltage
4 kW
Working Frequency
Daily 500 rounds
Protection Class
IP55
Impact Resistance
Ki 2-high security
Surface Coating
Electrostatic paint, on hot dip galvanization.
These are technical structural elements used in places where it is required to regulate vehicle entry and exits, that are controlled by photocells
and that have electromechanic component and that can be controlled either by hand
or by remote control.
WIL4/A
WIL4/A
-4 m arm length, -1 pc WIL4/A barrier,
- 24 Vdc engine,
- 3.5 seconds start-up time,
-Suitable for intensive use.
4 meters
□
WIL4KIT1
-1 pc 4 meter handle,
-1 pc bipod,
-1 pc flasher lamp.
(99
WIL5/A
5 meters
I
WIL6/A
6 meters
WIL5/A
-5 m arm length, -1 pc WIL5/A barrier,
- 24 Vdc engine,
- 3.5 seconds start-up time,
-Suitable for intensive use.
WIL5KIT1
-1 pc 5 meter handle,
-1 pc bipod,
-1 pc flasher lamp.
0199
WIL46A
WIL6KIT1
-6 m arm length, -1 pc WIL6/A barrier,
- 24 Vdc engine,
-1 pc 6 meter handle,
- 5 seconds start-up time,
-1 pc bipod,
-Suitable for intensive use. -1 pc flasher lamp.
WIL4KIT2
-1 meter WIL4/A Barrier, -1
Pc 4 meter handle,
-1 pc fork leg,
-1 pc flasher lamp,
-1 pc photocell,
-1 pc control receiver,
- 2 pcs of remote control.
WIL5KIT2
-1 meter WIL5/A Barrier, -1
Pc 5 meter handle,
-1 pc fork leg,
-1 pc flasher lamp,
-1 pc photocell,
-1 pc remote control
receiver, -2 pcs remote
control
WIL6KIT2
-1 meter WIL6A Barrier, -1
Pc 6 meter handle,
-1 pc fork leg,
-1 pc flasher lamp,
-1 pc photocell,
-1 pc control receiver,
- 2 pcs of remote control.
Arm barriers are systems in various sizes and materials consisting of control panel and main engine,
that control vehicle entry. Handle lengths vary in a way to meet needs.
SIGNO 3
SIGNO 3
- 6 m arm length, -1 pc SIGN03 barrier,
- 24 Vdc engine,
-1,8 seconds opening time, -1 pc bipod,
-Suitable for intensive use.
SIGNO 4
4 meters
SIGNO 6
6 meters
SIGN03 KIT
-1 pc 3 meter handle,
-1 pc flasher lamp.
SIGN03 KIT2
-1 meter SIGN03 Barrier, -1 Pc
3 meter handle,
-1 pc fork leg,
-1 pc flasher lamp,
-1 pc photocell,
-1 pc control receiver,
- 2 pcs of remote control.
SIGNO 4
SIGN04 KIT
- 4 m arm length, -1 pc SIGN04 barrier,
- 24 Vdc engine,
-1 pc 4 meter handle,
- 3.5 seconds start-up time,
-1 pc bipod,
-Suitable for intensive use. -1 pc flasher lamp.
SIGN04 KIT2
-1 meter SIGN04 Barrier, -1
Pc 4 meter handle,
-1 pc fork leg,
-1 pc flasher lamp,
-1 pc photocell,
-1 pc remote control
receiver, -2 pcs remote
control
SIGNO 3
-6 m arm length, -24 Vdc engine,
-6 seconds opening time,
-Suitable for intensive use.
SIGN06 KIT2
-1 meter SIGN06 Barrier,-1
pc 6 meter arm,
-1 pc fork leg,
-1 pc flasher lamp,
-1 pc photocell,
-1 pc control receiver,
- 2 pcs of remote control.
SIGN06 KIT
-1 meter SIGN06
Barrier, -1 pc 6 meter
handle,
-1 pc fork leg,
1 fl h l
■ PARKING AND ROAD REGULATION ELEMENTS
• Vehicle Traps
These are remote controlled and/or
manual controlled barriers used to
prevent entry of unwanted vehicles or to
arrange unidirectional traffic with teeth
that can be sticked into vehicle's wheels.
Body
Structure
ST44 over
hot dip galvanized
Opening
Closing
Manual Lock
Protection
Class
IP55
Body
Structure
K4
Medium Security
Body
Structure
ST44 over
hot dip galvanized
Protection
Class
IP55
Body
Structure
K4
Medium Security
Body
Structure
EPDM Rubber, Plastic, PVC
Protection
Class
IP55
Body
Structure
K4
Medium Security
• Distance Protective Car Sinks
These are barriers used by mounting on
the ground that protects distance from
walls to prevent parking vehicles from
hitting the wall or other vehicles.
• Speed Terminators
These are barriers mounted on the
ground and used with a view to prevent
traffic accidents and prevent fast
passages.
STOP OD HK KB 500
STOP OD HK KB 600
STOP OS HKK 500
STOP OS HKK 600
lockedLocked with
padlock
Produced from 42 mm
pipe. It has reflective band
for safety measures. It can be produced
with LED light and with different sized
pipes.
Reverse hinged to
prevent getting off
Manual (by hand)
Drive System
100%
Working Cont.
K4 middle safety
Impact Resistance
50 x 25 x 50 mm
Package Dimension
20 kg
Average Package W.
Reverse hinge
Maual System
Reflective band (with LED on demand)
Safety System
ST37 5 mm sheet
Body
42x2 mm pipe ST 37
Moving Block Part
Electrostatic paint
Coating
Mounted with steel plug on concrete
Assembly
2 years
Warranty Duration
Drive System
Working Cont.
Impact Resistance
Package Dimension
Average Package W.
Maual System
Safety System
Body
Moving Block Part
Coating
Assembly
Warranty Duration
Manual (by hand)
100%
K4 middle safety
75 x 15 x 15 mm
15 kg
Raising by hand
Reflective band
ST37 5 mm sheet
80x40x2 mm profile ST37
Electrostatic paint
Mounted with steel plug on concrete
2 years
Movement provided by M10
screw. Can be produced in
system locked version.
40x60x2 profile with
electrostatic yellow paint
150x150 flange
and steel plug
mounted
Stop Çit İnşaat ve
Yapı Malzemeleri San. Tic. Ltd. Şti.
Güzelce Mah. İskenderun Cad. No.6 E-5 Üzeri
(Güzelce Kavşağı Yanı) Büyükçekmece - İstanbul
Tel : +90(212)868 08 90 - 91
Fax: +90(212)868 08 87
E-mail: [email protected]
Web : www.stopbariyer.com