our Equipment Solutions Brochure

Transcription

Test & Measurement
Rental Solutions Guide
Volume 41 • Issue 21
techrentals
Office Locations
From the CEO
TR as a business really focusses in on providing you with the right rental solutions
for electronic equipment. Working with our customers, we’ve tackled a diverse
range of complex applications and scenarios; solving your technical issues utilising TR’s experienced sales
and engineering expertise. Collectively the sales team has more than 120 years of expertise available
to assist you with your testing or measurement issues. This available expertise is just part of the value
that we provide in the overall service that we have built over more than 40 years. We have also embraced
social media over the last 12 months. Building valuable tools and resources for you such as a new YouTube
channel where you can easily access videos on how to use a range of rental assets.
We’re continually looking at better ways to cater for your requirements and ensure that TR is offering you
a range of complementary services to support your business. Our TR Calibration business has invested in
a range of new capabilities to support your test and measurement activities. This involved increasing its
NATA capability around a range of areas including torque transducers, high voltage/low frequency, and
vibration. Our TR Hirecom business is also available to work with you to satisfy your two way radio and
satellite phone requirements.
We are continually adding value and new solutions into our business. So, whether
you need something for your short or long term requirements, please don’t
hesitate in contacting us to facilitate your needs.
Dave Gallagher, CEO.
TechRentals Australia
Darwin
Perth
1800 632 652
www.techrentals.com.au
[email protected]
Unit 6, 143 Coonawarra Road
Winnellie (Driveway access via Mataram St)
Northern Territory 0820
Ph: 1800 632 652| Fax: 08 8947 2901
122 Kewdale Road
Kewdale
Western Australia 6105
Ph: 1800 632 652 | Fax: 08 9441 3999
Adelaide
Melbourne
Sydney
169 South Road
Ridleyton
South Australia 5008
Ph: 1800 632 652 | Fax: 08 8302 8899
18 Joseph Street
Blackburn North
Victoria 3130
Ph: 1800 632 652 | Fax: 03 9896 3099
41 Enterprise Circuit
Prestons
New South Wales 2170
Ph: 1800 632 652 | Fax: 02 8777 0877
Brisbane
Newcastle
Townsville
72 Donaldson Road
Rocklea
Queensland 4106
Ph: 1800 632 652 | Fax: 07 3077 8872
Unit 2, 1 Hartley Drive
Thornton
Ph: 1800 632 652 | Fax: 02 4966 3586
Unit 2, 14 Blackhawk Boulevard
Thuringowa Central
Queensland 4817
Ph: 1800 632 652 | Fax: 07 4723 5397
TechRentals Malaysia
TR Calibration
TechRentals New Zealand*
603 5614 1135
www.techrentals.com.my
1300 790 480
www.trcalibration.com.au
0800 832 475
www.techrentals.co.nz
Selangor D.E
Brisbane
Auckland
29 Jalan Serendah 26/39,
iParc 2, Seksyen 26,
40400 Shah Alam Selangor
Malaysia
Ph: +60 3 5614 1135
Fax: +60 3 5614 4139
72 Donaldson Road
Rocklea
Queensland 4106
Ph: 1300 790 480
Fax: 07 3717 9148
101A Station Road
Penrose Auckland
New Zealand
Ph: +64 9 589 2030
Fax: +64 9 589 2031
Penang
Sydney
2-1-40, Tingkat Mahsuri 4 (1264),
Terrace-Plus,
11950 Bayan Lepas,
Penang, Malaysia
Ph: +60 4 619 2641
Fax: +60 4 619 2643
41 Enterprise Circuit
Prestons
Ph: 1300 790 480
Fax: 02 8783 5171
*Distributor of TechRentals Australia
Your trusted partner in technology.
Offering innovative solutions
through our leading brands:
techrentals
hirecom
telecom
Contents
10 Reasons
1
2
3
4
5
6
7
8
9
10
General Index
2
Manufacturers Index
5
Why You Should Rent
Stretch your budget
Test equipment is often used just some of the time. Rental
allows you to pay for it only when you use it, as well as stretching
your budget by accessing more equipment than you could if you
purchased it outright.
Utilise operating expense
Test equipment is expensive often sitting on a shelf collecting
dust – not an effective use of your valuable business capital.
Rental allows you to free up cash for other parts of the business
where it can be used to generate additional profits.
Conduct product research before purchasing
It is not always clear immediately which make and model will
fulfil your requirements best. Trialling it on casual rental gives
you hands-on experience to guide purchase decisions.
Electronics8
Radio Frequency
12
Data & Telecommunications
18
Electrical Power
24
General Industrial
38
Physical Measurement
52
Recover costs more quickly
Generally rental payments are fully tax deductable and the
expense can be recovered far more quickly than the tax
allowances for ongoing asset depreciation.†
Eliminate running costs
The expense of maintaining, calibrating and warehousing your
test and measurement equipment can be high. With rental you
avoid these costs, as well as freeing up storage space within
your premises.
Cost allocation is simplified
Rental payments are easy to track and account for in your
business, making it easy to allocate appropriate costs to
departments, clients or specific projects.
Construction58
Environmental & OHS
64
Managed Solutions 43
Respond to sudden demands
At peak periods, for unexpected projects, or when essential
equipment breaks down, rental can put the necessary
equipment in your hands ensuring seamless operations.
Apply new technologies and avoid obsolescence
Rental allows you to update your equipment in line with other
businesses and take advantage of new technologies. It also
avoids the potential cost of owning equipment that can be 
quickly superseded.
Preserve credit
Renting avoids the potential cost of utilising credit facilities
such as an overdraft or credit cards, which are often used for
equipment purchases.
Case Studies
28-29, 51, 57 & 61
Save time and reduce your real costs.
Find out all about our Configuration and
Download solutions on page 23
Technical support
When you rent from TechRentals you’ll have the support of an
experienced team of product experts, who’ll help you get the
most from your equipment. And in the unlikely event of equipment
failure we will do our utmost to rectify the issues as soon as possible.
†
This resource centre provides manuals,
technical information, and how-to videos.
Visit www.techrentals.com.au and
select Technical Tips and Videos.
Please ensure you obtain independent professional taxation advice.
1
General Index
A
AC
See Electrical Power
Accelerometer54
Adhesion Tester
52
Air
Flow
58, 59, 65, 67
Quality
58, 59, 65, 67
Air Balancing Hood
58, 59
59
Air Conditioner Valve Balancing
Air Conditioning
Coolant Flow
69
Electronic Manifold
59
Measurement
58
Valve Balancing
59
Air Conditioning & Air Flow
58
Air Quality
Monitoring
58, 64, 65, 67
Particles
65
Pressure & Humidity
58, 65
Air Quality & Heat Stress
65
Airborne Dust & Particle Meter
65
Aircraft Maintenance
Pitot Static Tester
49
Wireless Air Data Test Set
49
Alcohol (BAC) Breath Tester
64
Alignment
41, 42, 54
Anemometer
58, 59
14, 16
Antenna & Cable Test Antennas17
25
Appliance Tester
Area Heat Stress
65, 67
B
Balancing Machinery
59
Balometer
58, 59
Barometric Logger
69
Bath
Constant Temperature
42
37
Battery Management Systems
Blast Logger
56
Body Vibration Measurement
54, 56
68, 69
Bore Hole Water Quality
Borescopes40
Breath Analyser
64
64
Breath Tester
Bridge LCR
9
C
Cable
Fault Locators
24
LAN Test
18, 19
Locators
18, 19, 24, 60, 61
Testers
18, 19
Cable & Fault Locators
60
Cable & Pipe Tracers & Fault Locators
24
Cable Analysers
18
Cable Identification Kit
24
Cable Locators
60
Calibrator
Current
10, 42, 47
Current Loop
10, 42, 45, 46, 47
Dry Block Temperature
42, 47
Electronic
10
Fitting Set
45
Hydraulic
42, 44, 47
Industrial
42, 47
Intrinsically Safe Loop
45
Laboratory
46
Loop
42, 47
Pneumatic Instruments
42, 47
Pressure
42, 44, 45, 46, 47
Process
42, 45, 46, 47
Resistance
10, 42, 45, 46, 47
Temperature
42, 46, 47
Voltage
10, 42, 45, 46, 47
Camera
Endoscopes
40
High Speed
41
Pipe Inspection
40, 62
Thermal Imaging
39, 40
Video
41
Carbon Dioxide (CO2)
51, 64, 65, 67
Carbon Monoxide & Nitrogen Dioxide
2
Monitors64
51, 64, 65, 67
Carbon Monoxide (CO)
18, 19
Cat 5, 5E, 6
54
Charge Amplifier
Chart Recorders
47, 49
Chlorine Meters
68
Circuit Breaker Analyser System
35
34, 35
Circuit Breaker Testers
24
Circuit Tracer
31
Clamp-on Sensors
Clean Room Monitors
65
Cleaver - Fibre Optic
22
Coating Thickness
52
51
Combustion Gas Analysis
Combustion, Flue & Industrial Gas Analysers 51
Communication Test Sets
16
Compressor Output
Flow
67
Quality
67
Concrete Cover Meters
60
Concrete Hardness Testers
60
Concrete Testing
Adhesion
52
Corrosion
60
Cover Meter
60
Reo Depth
60
Test Hammer
60
Concrete Testing Equipment
60
60
Concrete Thickness Gauges
Confined Space Entry
64, 65
Construction58
59
58
60
Distance Measurement & Surveying
62
Pipeline & Cavity Inspection
62
Underground Services Location
60
Utility Leak Detection
61
Current
Clamp
30, 31, 32
DC Source
9
Injection
35, 36
Input Logger
48
Loop
42, 46, 47
Meter
30, 31, 50, 69
Primary Injection
35, 36
Probe
9, 31, 32
Secondary Injection
35
Transformer (CT)
31
Current Clamps Probes & Accessories 31, 32
Current Injectors
35, 36
Current Supply Unit
35
Current Transformer Testing
34
D
18
LAN Cable Test
18, 19
DSL/POTS Test Set
20
Fibre Optic Launch Cables & Patch Leads 23
Fusion Splicers
22
LAN Cable Testers
18
LAN/WAN Analysers
19
Light Sources & Power Meters
20
OTDR & Fibre Inspection
22
PDH/SDH Analysers
19
48, 49
Data Loggers
DC High Voltage
9, 31, 32, 33
DC Power Supplies
9, 10
DC Power Supplies & Loads
9, 10
DC Source
10
10, 46
Decade Resistance Box
27
Demand Analysers
65, 67
Dewpoint
Digital Multimeters
8
Digital Storage Oscilloscopes
8, 9
Distance Measurement
62
62
Dry Block Calibrators
47
DSL/POTS20
DSn/PDH Ethernet Analysers
20
Duct Leakage Testers
58
Ductors
25, 27
Dust Measurement
65
E
E & H Field Strength Meter Gauss
10, 11
E & H Field Strength Meters
10, 11
E1/E3 Tester
19, 20
Earth Leakage
25, 32, 33, 34
Earth Testers
25
Electrical Cable Test
25, 32, 33, 34
Surge Generator
24
TDR
24
Thumper
24
Electrical Installation & Test
Appliance Tester
25
Earth Leakage (RCD)
25, 32, 33, 34
High Voltage Test (Hipot)
32, 33
Insulation Oil Testers
33
Insulation Test
24, 25, 32, 33, 34
Resistance Test
25, 27, 32
Soil/Ground Resistance
25
VLF Testers
33
Electrical Power
24
37
24
35
Current Clamps Probes & Accessories
31
Current Injectors
35
Electrical Testers
24
Insulation Testers & Meggers to 20kV
32
Micro-Ohm Meters & Earth Testers
25
Oil, Hipot & VLF Testers above 20kV
33
PAT Testers & RCD Testers
25
Power Analysers & Recorders
27
Power Transformers & Variacs
37
Protection Relay Testing Systems
36
Transformer Testers
34
Electrical Power Generation & Transmission
Current Injection
35
High Voltage Test (Hipot)
33
Power Quality
24, 27, 30, 31
Protection Relay Test
35, 36
Electrical Power Quality
Harmonics
24, 27, 30, 31
Power Factor
24, 27, 30, 31
Power Loggers
27, 30
Power Quality Analysers
27, 30
Electrical Power Sources Battery
Management Systems
37
Current Injectors
35
24
Electrical Testers
Electrical Transducers
24
Electrochemistry68
Electrometers8
Electronic Calibrators
10
Electronic Load
9, 10
Electronics8
9
8
11
EMC & Power Disturbance Simulators
11
10
Function Generators
9
Gauss/Tesla Meters
10
Laboratory Calibrators
10
LCR Meters
9
Multimeters& Electrometers
8
Probes & Accessories
9
TV Test Equipment
10
8
Electrostatic Charge Measurement
Electrostatic Meters
8
11
EMC Test Equipment
11
EMC/EMI Test Equipment
11
Endoscopes
40, 41
Endoscopes Borescopes Visual Inspection
40
Environmental & OHS
65
Airborne Dust & Particle Meters
65
Environmental Gas & Vapour Meters
64
Environment Flow Meters
69
Light Meters, UVA/B/C Measurement
69
Moisture & Humidity Meters
67
Noise & Sound Analysers
67
Personal Gas & Vapour Monitors
64
Radiation Monitoring & Protection
68
1800 632 652
General Index
Water Quality, pH Meters &
Weather Stations
69
Electrochem68
Environmental Flow Meters
69
64
Environmental Noise
67
Environmental Noise Loggers
67
19
Ethernet Analysers
Ethernet Loopback
19
Ethernet Testers
19
Ethernet Test Sets
19
Etherscope19
Excavator Cable Locators
60
F
Fault Locators
24, 60
Fault Loop Impedance Testers
25
Fibre Inspection & Analysis Probes
23
22, 23
Fibre Inspection & Test Kit
Fibre Inspection-Capture Probes
22, 23
Fibre Optic Launch Cables & Patch Leads 18, 23
Fibre Optics
18, 23
Cleaver
22
Field Strength Meters
10, 11
Gauss
10, 11
RF
11
Flaw Detectors
52
Flow Hoods
58, 59
Flow Meters
50, 69
Compressed Air
50
Doppler
50
Gas
50
Liquid
50, 69
Non-Intrusive
50
Open Channel
50, 69
Transit Time
50, 69
Ultrasonic
50, 69
Flow Meters for Liquids & Gases
50
Flue Inspection
40, 62
54
Force Gauges
Formaldehyde Meter
64
Four Pole Soil Resistivity Testing Kit
25
Frequency Counters
12
Frequency Response Analysers
34, 35
Function Generators
9
22
Fusion Splicers
G
Gamma Radiation
68
Gas64
Carbon Dioxide (CO2)
51
Carbon Monoxide (CO)
51
Flammable (LEL)
64, 65
Formaldehyde
64
Hydrogen Sulphide (H2S)
64, 65
Methane (CH4)
64
Nitric Oxide (NO)
51
Nitrogen Dioxide (NO2)
51
Oxygen (O2)
51, 64
Ozone (O3)
64
Petroleum Hydrocarbons
64
Refrigerant
64
SF6
64
VOC
64
Gas & Vapour Meters
64
Gas Analysis & Monitoring
51, 64, 65
Gauss/Tesla Meter
10, 11
General Industrial
38
Combustion, Flue & Industrial Gas Analysers
51
Data Loggers
48
Endoscopes Borescopes Visual Inspection 40
50
High Speed Video Inspection Cameras
41
High Speed Waveform Recorders
47
Industrial Process Calibrators
42
Infrared Thermal Imaging Cameras
39
Laser Rotational Shaft Alignment
41
Pressure Vacuum Gauges/Recorders
49
Strip Chart Recorders
47
Tachometers/Stroboscopes
41
Temperature Meters/IR Thermometers
38
Wet & Dry Block Calibrators
47
H
M
I
69
Illuminance Meter
Inclinometers54
Indoor Air Quality
65, 67
42, 47
39, 40
Infrared Cameras
39
Infrared Thermometers
38
Injection Test Set
36
47
Instrumentation Amplifier
Insulation Diagnostic Analysers
34
Insulation Testers
25, 32
32, 33
Insulation Testers & Meggers to 20kV Intrinsically Safe
Current Loop Calibrator
42
Gas Monitor
64, 65
Moisture Analyser
67
Photo-Ionisation Detector (PID)
64
38
IR Thermometers
N
Hardness Testers
52
Harmonics (Power)
27, 31
Hart Communicators
45
65, 67
Heat Stress
High Frequency Spectrum Analysers 12, 14
41
47
High Voltage Insulation Dielectrics Test Set 33, 34
32, 33
Hipot Testers
Holiday Detector
52, 54
Hot Wire Anemometer
58, 59
Humidity
Concrete
60
Indoor Air
65, 67
Logging
48, 49
Natural Gas
67
Thermohygrograph
65
Weather
69
HVAC & IAQ
58, 59, 65, 67
Hydraulic Pressure
42, 44, 52
L
Laboratory Calibrator
LAN
Analysers
Cable Certification
Cable Testers
LAN Analysers/Management
LAN Cable Testers
LAN/WAN Analysers
Landfill Gas Monitor
Laser Distance & Speed
LCR Meters
Leak Detectors
Electrical
Fluid
Gas Pipe
Mechanical
Microwave Oven
Refrigerant
Water
Light Measurement
Light Source
Linear Position Transducers
Liquid Flow Meters
Load Cells
Loggers
(also see Recorders)
Accessories
Autoclave
Data
Explosion
Flow
Humidity
Multifunction Switch/Measure Unit
Temperature
Luminance Meter
Lux Meter
46
19
18, 19
18, 19
19
18
19
64
56, 62
41
9
61
61
61, 64
61
68
64
61
62, 69
69
20
20
54
50
54
48
48
48
48, 49
56
50
48, 49
49
48, 49
69
69
Machinery
Balancing
54
Vibration
54, 56
10, 11
Magnetic Field Meters
Manometers
58, 59
Material Hardness Testers
52
Memory Recorders
47, 48
64
Methane Monitors
25, 27
Micro-Ohm Meters
25
Microwave Leakage Detectors
68
Microwave Oven Survey Meters
68
Modified Atmosphere Packaging Test 51, 64
Modular Power System Mainframe
10
Moisture
Wood
60
67
Moisture Analysers
67
Multimeters8
Multimeters & Electrometers
8
Natural Gas
67
Network Analysers
Antenna & Cable Test
14, 16
Cable Test
14
Power
27, 30
RF
14
Network Analysers
14, 16
14
Network Analysers/Antenna & Cable Test
67
Noise & Sound
67
67
Noise Loggers
Non-Destructive Testing (NDT)
52
O
Occupational Health & Safety
64
Air Quality
58, 59, 65, 67
Appliance Testing
25
Confined Space Entry
65
Formaldehyde
64
Heat Stress
65, 67
Lighting
69
Noise & Sound
67
Ozone
64
Radiation
11, 68
UV Exposure
69
Vibration
54
Volatile Organic Compound (VOC)
64
33, 34
Oil Insulation Testers
Oil, Hipot & VLF Testers Above 20kV
33
Optical Power Meters
20
Oscilloscopes
Digital Storage
8, 9
Portable
8
OTDR
22, 23
22
OTDR, FC & Fibre Accessories
22, 23
Oxygen & CO2 Analyser
51, 64
Oxygen (O2)
51, 64
Ozone (O3)
64
P
Pancake Load Cell
54
Particle Counters
65
PAT25
25
PDH Analysers
19, 20
PDH/SDH Analysers
19
64
Petrochemical Contamination
64
pH Measurement
68
pH Meters
68
pH reading for Meat Standards
68
pH, mV & Temperature Measurement
68
Photo-Ionisation Detector (PID)
64
52
52
Non-Destructive Testing
52
Position Transducers
54
Inclinometers
54
Force Gauges
54
3
General Index
Load Cells
54
Vibration Analysis
54
Speed Measurement
56
Pinhole Detectors
52
Pipe Locators
60
62
Pipeline Camera Inspection System
62
40
Pipeline Inspection
Pitot Static Testers
49
Pitot Tube
58
9
Portable Appliance Testers
25
Portable Residue Chlorine Meters
68
54
POTS20
Power (Also see Electrical Power)
Power Analysers
27
Power Analysers & Recorders
27
Power Demand Analysers
27
24, 27, 30, 31
Power Disturbance
27, 30, 31
Power Loggers
16, 17
Power Meter - RF
Power Meters
16
Power Meters & Sensors
16, 17
Power Supplies - DC
9, 10
Power Transformer Testers
34
Power Transformers
37
Pressure
Calibrators
42, 44, 45, 46, 47
Circular Chart Recorder
49
Indicator/Gauge
49
Logging Gauge
49
49
Pressure Calibrators
45
47
Pressure Recorders
Pressure Transducers
45
49
Pressure Vacuum Gauge/Recorders
Primary & Secondary Test Systems
35
Primary Current Injection Test System
35
Probes
Current
9, 31, 32
High Voltage
9
45, 46, 47
Process Calibrators
Profibus
45
Protection Relay Test
35, 36
36
Pulse Porosity Detectors
54
42, 44, 46
Pump
R
Radar Speed Gun
56
Radiation Monitor
11, 68
68
Radiation Monitors
68
Radio Frequency
12
Antennas
17
16
Frequency Counters
12
Network Analysers/Antenna & Cable Test 14
Power Meters - RF
16
RF Accessories
17
RF Amplifiers
17
RF Attenuators
17
RF Signal & Sweep Generators
12
Spectrum Analysers - High Frequency
12
Radiometer69
RCD Test
25, 32
Recorders48
Chart
47,49
Memory
47, 48
Pressure
47, 49
Refrigerant Leak Detection
64
Relay Test
35, 36
Resistance
Calibration
10, 42, 46, 47
Decade
10, 46
Ground/Soil
25
Micro-Ohm
25, 27
Static
32
Tester
25, 32, 33, 34
RF12
Amplifiers
17
Antenna/SWR
14, 16, 17
4
Antennas
Attenuator
EMC/EMI Test
Field Strength Meters
Frequency Counters
Network Analyser
Power Meters
Radiation Monitor
RF & Microwave Accessories
Sensor
RF Accessories
Signal Generators
Spectrum Analyser
Sweep Generators
Rotating Balancing
RTD Calibrator
14, 16, 17
17
16
10, 11
11
10, 11
12
14
16
11, 68
17
16, 17
17
12
12
12
54, 56
42
S
Safety Bolt Inspection System
54
Scopemeter
8, 9
SDH Analysers
19
Sensors - RF
16, 17
Shaft Alignment
41, 42, 54
Shaker Table
54
Signal Analysis Software
17
Signal Generators
12
RF
12
58
Smoke Generating Machine
Soil Resistivity
25
Sound
Dose Meter
67
Measurement
67
Signal Analysis
67
Sound Level Meter
54, 56, 67, 68
Vibration
54, 56
Spectrum Analyser
High Frequency
12, 14
RF
12, 14
Speed Measurement
56
22
Splicer - Fibre Optic
30, 32
Startup Current
Static Discharge Generator
11
STM1 ... STM64
19, 20
47
Stroboscope41
Surge Generator
24
Surge Transient Generator EMC/EMI Test
11
Sweep Generators
12
T
Tachometers41
Tachometers/Stroboscopes41
Tan Delta Measurement
33, 35
TDR24
Telecommunications
18, 19
Access Tester
19, 20
CDMA
17
Data Tester
19
PDH
19
POTS
20
SDH
19
Temperature
Humidity Logging
48, 49
IR Thermometers
38
Probe
38
Thermometers
38, 39
Temperature Bath
47
38
Temperature Meters
38
Tesla/Gauss Meters
10
25
Test & Tagging
Thermal Imaging Camera
39, 40
Thermohygrograph65
Thickness Gauge
52
Time Domain Reflector TDR
24
TPH Monitor
64
Tracking Generator
12
Transducers
Electrical
24
Position
54
Pressure49
Transformer Insulation Moisture Analyser
35
34, 35
Transformer Testers
Transient Burst
11
Transport
Inclinometers
54
Turbidity
68, 69
TV Test Equipment
10
U
Ultrafine Particle Counters
Ultrasonic Probes
Ultraviolet Test Lamp
UV Exposure
UV Radiation
65
52
52
60
61
69
52
V
Valve Balancing (Air Conditioning)
59
Variacs37
Vehicle Volume & Speed Counter
56
Ventilation Meters
59
Vibration
Accelerometer
54
Analyser
54, 56
Blast Logging
56
Table
54
Whole Body
54
Vibration Analysis
54
56
Vibration Calibrators
Vibration Loggers
56
Video
Endoscopes
41
High Speed
41
Pipeline Inspection
40, 41, 62
Visual Inspection
40, 41, 62
Volatile Organic Compounds (VOC)
64
Voltage Calibrator
42, 47
W
WAN Analysers
19
Water
Depth
50, 68, 69
Flow
50, 69
pH
68
Quality
68
Sampling
68
68
Water Quality, pH Meters & Electrochem
Water/Oil Bath Temperature Calibrators
42
Water/Oil Temperature Bath
47
WBGT65
Weather69
Weather Stations
69
47
Wind Speed & Direction
69
Wind Turbine Lightning Protection
27
Test Lead Set
34
Winding Transformer Meter
49
Wood & Masonry Testing
Moisture Meter
60
Workplace Safety
(Also See Environmental & OHS)
X
X-Ray Measurement
Can’t see what
you’re looking for?
New items are being added to the
inventory constantly, so please
call us on 1800 632 652
to discuss your requirements
68
Manufacturers Index
1800 632 652
AARONIA
AAR,HF-6010512
ABACUS
ABB,CB200024
ACTERNA
ACT,MTS800020
ADVANTEST
ADV,U377112
AEROQUAL
AER,500L64
AH SYSTEMS
AH,SAS-200/57117
AH,SAS-57117
AIRFLOW
AIR,PITOT-3658
ALCOLIZER
ALC,WM364
ALNOR
ALN,EBT-721-A358
ALN,EBT-73158
ANRITSU
ANR,ANTENNA17
ANR,MS2711A12
ANR,MS2712E14
ANR,MS2721A14
ANR,MT9083A SM-MM 22
ANR,MT9083B22
ANR,MW82119B-2100 14
ANR,MW82119B-850 14
ANR,S331D14
ANR,S331E14
ANR,S331E-2114
ANR,S331L16
ANR,S332D16
ANR,S332E16
ANR,S332E-CMAP-MOD 16
ANR,S820D16
ANR,WAVEGUIDE-ADAP 16
ANT
ANT,DIRECTIONAL YAGI ANT,OMNIDIRECTIONAL 17
17
AQUA
AQU,SNAKEEYE362
ARL
ARL,NGARA67
BEAMEX
BEA,MC5 42
BEA,MC5-IS42
BEA,MC6
42
BEL
BEL,419010
BEL,518010
BIRD
BIR,4316
BIR,ELEMENT-HF17
BIR,ELEMENT-LF17
BRUEL & KJAER
BK,4448-IS-3KIT67
BW HONEYWELL
BW,BUMP65
BW,GA-NH3-KIT65
BW,GA-SPAK65
BW,MICROCLIP65
COM-POWER CORPORATION
COM,AH-11817
CRYSTAL ENGINEERING
CRY,NVISION-30-NATA 42
CRY,XP21-100-NATA 49
CRY,XP21-300-NATA 49
CRY,XP2I CAL KIT 1 42
CRY,XP2I-10K49
CRY,XP2I-10K-NATA 49
CRY,XP2I-1K-NATA49
CRY,XP2I-3K49
CRY,XP2I-3K-NATA49
CSCOPE INTERNATIONAL
CSC,DXL2-SGV224
CSC,DXL2-SGV260
CONCEPT SMOKE SYSTEMS
CSS,COLT458
DATATAKER
DE,CANGATE48
DE,DT8048
DE,DT80M48
DE,DT8548
DEFELSKO CORPORATION
DEF,POS-200ADV52
DEF,POS-600052
DEF,POSITEST52
DRU,DPI611-2-NATA 44
DRU,DPI620-100045
DRU,DPI620-35044
DRU,DPI70558
DRU,DPI705-7BARA 58
DRU,DPI705-IS58
DRU,GENII45
DRU,PV411A45
DRU,UPS III-IS
45
EASY-LASER
EAS,D52541
EA TECHNOLOGY
EAT,ULTRATEVPLUS32
ELCOMETER
ELC,331-B60
ELC,331-SH60
EMERSON
EME,37545
EME,47545
ENI
ENI,604L17
ETM
ETM,990048
EXFO
EXF,FTB-860G19
EXF,PPM352_FIP400 20
EXFO,ETS-1000L19
EXFO,PPM350B20
FIBREOPTIC
FIB,LAUNCH MM 50UM
23
FIB,LAUNCH MM 62.5UM 23
FIB,LAUNCH SM 9UM
23
FIB,MTFS15-100040
DETEC
DET,W806652
FIT
FIT,HP45
FIT,LP45
DIMMER DOT
DIM,D201P37
VAR,D-283-OB37
FITEL
FIT,S123M1222
FIT,S178_S32522
DKK-TOA CORPORATION
DKK,RC-31P-DP68
FIXTURELASER
FIX,DIRIGO41
FIX,PAT41
DRANETZ-BMI
DRA-BMI,TR251031
DRUCK
DRU,DPI104-35044
DRU,DPI603-2044
DRU,DPI610-244
DRU,DPI610-2044
DRU,DPI610-40044
DRU,DPI611-244
DRU,DPI611-2044
FLEXIM
FLE,G60850
FLIR SYSTEMS
FLI,E6039
FLI,E60-II39
FLI,E839
FLI,T39039
FLUKE
FLU,1523-NATA39
FLU,158732
FLU,1625-KIT25
FLU,1630-EARTH CLAMP 25
FLU,165332
FLU,173530
FLU,199C-SCOPEMETER9
FLU,199C-SCOPEMETER-2049
FLU,204224
FLU,289 FLUKEVIEW
8
FLU,28II-EX8
FLU,34527
FLU,37631
FLU,43530
FLU,48168
FLU,52-238
FLU,54-2B-FVF38
FLU,5500A10
FLU,5500A-NATA10
FLU,572-238
FLU,700P08-70BAR45
FLU,700P31-690BAR45
FLU,700PD3-345 MBAR 45
FLU,700PD6-7BAR45
FLU,719-100G45
FLU,719-30G45
FLU,72546
FLU,725-NATA46
FLU,72646
FLU,75346
FLU,75446
FLU,77346
FLU,789 PROCESSMETER 46
FLU,80K-409
FLU,81054
FLU,87-58
FLU,90I-610S31
FLU,9144-NATA47
FLU,9150-NATA47
FLU,9170-NATA47
FLU,9170-R47
FLU,9170-R-NATA47
FLU,97565
FLU,DSX-500018
FLU,DSX-MM18
FLU,DSX-MM EF LEADS
18
FLU,DSX-MMSM18
FLU,DSX-SM18
FLU,DTX180019
FLU,DTX-SFM219
FLU,EI-162BN25
FLU,FI-1000-KIT22
FLU,FI-700022
FLU,FTK100020
FLU,I5SPQ331
FLU,I-PROBE9
FLU,OPTIFIBER-PRO Q
22
FLU,OPTIFIBER-PRO-MM22
FLU,Ti12540
FLU,Ti2540
FLU,Ti3240
FLU,Ti32_WIDE-ANGLE40
FLU,TIS5540
FLU,VR171030
FUJIKURA
FUJ,FSM60R-CT3022
FUJ,FSM60S-CT3022
FUJ,FSM70S22
FUTEK
FUT,IHH500-20T54
FUT,IHH500-2T54
5
Manufacturers Index
GCDATACONCEPTS
GCD,X500-254
GENERAL DYNAMICS
GD,R8000B16
GE MEASUREMENT & CONTROL
GE,ADTS542F49
GE,DYNAMIC52
GE,EVEREST CA-ZOOM
62
GE,EVEREST PTZ-140
62
GE,EVEREST PTZ-70
62
GE PANAMETRICS
PAN,C-LP-40NM50
PAN,GC-RL30250
PAN,GC-RL31950
PAN,OKS50
PAN,PM88067
PAN,PT87850
PAN,PT878E50
PAN,PT878GC-0150
PAN,PT878T50
GEOTECH
GEO,GEM500064
GLOBAL
GLO,FP11169
GLOi AB
GLO,ALISENSOR54
GENRAD
GR,1433-2010
GR,1433B-NATA10
GR,1433F-NATA10
GRA,GR150-S5-NATA47
GRIDSENSE
CHK,CR10031
CHK,PM2027
CHK,PM30PLUS27
CHK,PM3527
CHK,PM40PQA27
HIO,342369
HIO,3455HVIT-5KV32
HIO,355437
HIO,3641-20-KIT48
HIO,8421-5148
HIO,884147
HIO,884247
HIO,886048
HIO,893848
HIO,9322-KIT48
HIO,933548
HIO,9660CT100A32
HIO,9661 CCT-500A
32
HIO,9661-01 CCT-500A 32
HIO,9694CT5A32
HIO,LCR 3532-50
9
HIO,LR8431-2048
HIO,PW3360-2130
HIPOTRONICS
HIP,880PL33
HIGH VOLTAGE INC
HIV,PFT100333
HIV,PFT301CM33
HIV,PFT50333
HOLADAY
HOL,HI-360411
HOL,HI-362711
HPI CYPHER
HPI,CYPHER500068
HV DIAGNOSTICS
HVD,HVA TD60
33
HVD,HVA30-DC/VLF33
HVD,HVA60-DC/VLF34
HVD,HVA90_DC-VLF34
HYDROLAB
HYD,MS568
HYDROLOGICAL SERVICES
HYS,OSSB169
JDSU,MTS-2000-FCOMP22
JDSU,MTS-4000-FCOMP23
JDSU,OLP-5520
JDSU,OLP-87 PRO
20
JDSU,OLS-5520
JDSU,P5000i23
JDSU,SMARTCLASS-E1-D20
JDSU,SMARTCLASS-ETH19
JOFFRA
JOF,CTC-1200A47
JOF,CTC-650A47
JOF,DPC-1000-NATA46
KEYSIGHT
KEY,33612A9
KEY,34461A8
KEY,34980A49
KEY,53181A12
KEY,5350B12
KEY,66332A10
KEY,6675A9
KEY,6702A10
KEY,8449B17
KEY,8494/5B17
KEY,8495D17
KEY,8648D12
KEY,8648D-1E512
KEY,89601B17
KEY,DSOX3024A8
KEY,E4416A16
KEY,E4418B-00116
KEY,E4438C12
KEY,E5071C14
KEY,E9300A16
KEY,E9300B16
KEY,MSO6104A8
KEY,N5181B12
KEY,N9030A12
KEY,N9913A14
KEY,N9344C12
KEY,N9344C-TG12
KEY,U1253B8
KEY,U1620A8
MEG,DET2/225
MEG,DET4TC225
MEG,DET4TCR225
MEG,DLRO-100LEAD27
MEG,DLRO10X25
MEG,DLRO20027
MEG,DLRO60027
MEG,DLRO-LEADSET27
MEG,EZ-THUMP1224
MEG,IDAX30034
MEG,INGVAR35
MEG,MIT1020-10KV DIT 32
MEG,MIT102533
MEG,MIT152533
MEG,MIT52532
MEG,MOM227
MEG,MTO33034
MEG,OTS80PB34
MEG,PAT42025
MEG,RCDT33025
MEG,S1-1052 10KV-DIT 33
MEG,S1-552 5KVDIT
33
MEG,SVERKER78036
MEG,SVERKER9--E36
MEG,TDR2000/2RM24
MEG,TM176035
MEG,TTR320-4734
MEGGER (PROGRAMMA)
PRO,SVERKER76036
PRO,TORKEL-84037
PRO,TORKEL-86037
PRO,TXL87037
MEGGER (MULTIAMP)
MUL,MS-235
MEL
MEL,M5-20054
METREL
MET,IT3017INSTALTEST25
MONARCH
MON,PLT200-KIT41
GTI SPINDLE
GTI,IPAD3VAB56
IFR AUSTRALIA
IFR,2945B16
KIKUSUI
KIK,PLZ1003W10
KIK,TOS-510132
HAGNER
HAG,EC1-X69
IKEGPS
IKE,300PRO62
KINGFISHER
KIN,KI28010_260020
NARDA
NAR,821768
NAR,NBM-52011
NAR,NBM-55011
NAR,RADMAN68
HILTI
HIL,HAT28M54
HIL,PS100060
HIL,PS200 FERROSCAN 60
HIL,PS25060
HIL,TESTER454
ILI
ILI,1400ABC69
KRAUTKRAMER
KRA,DYNAPOCKET52
NOVATECH
NOV,1637-551
ION SCIENCE
ION,GASCHECKG364
MARCONI
MAR,691017
MAR,691317
MAR,697017
NTI AUDIO
NTI,NT-DAS67
NTI,XL2+M221067
HIOKI
HIO,3169-21 CT500AMP 30
HIO,3169-21CLAMPONPT30
HIO,3169-21CT1000AMP30
HIO,3196-PQA30
HIO,3196PQA-CT1000A30
HIO,319830
HIO,328531
HIO,329032
HIO,3360-2130
HIO,340441
6
ISA
ISA,CBA100035
ISCO
ISCO,671268
JDSU/VIAVI
JDSU,ANT5-STM1619
JDSU,ANT5-STM419
JDSU,EDT-13519
JDSU,FIBER_INSPECT22
JDSU,HST-3000 DSL
20
MARTINDALE
MAR,PSCI424-58524
MECMESIN
MEC,AFG-1000NALC54
MEGGER
MEG,CAL30034
MEG,CI-KIT24
MEG,CSU600AT35
OLYMPUS
OLY,27MG52
OLY,38DL52
OLY,D790-SM52
OLY,EPOCH60052
OLY,IPLEX-LT 3.5
41
OLY,IPLEX-LT 7.5
41
OLY,IPLEX-MXII41
OLY,IPLEX-RT 7.5
41
OLY,IPLEX-UL41
OLY,ISPEEDLT41
Manufacturers Index
1800 632 652
OLY,SERIES-C41
PAN,26MG52
RH SYSTEMS
RH,973-SF664
OMICRON
OMI,CMC256-636
OMI,CMC256PLUS36
OMI,CMC35636
OMI,CMC356_6185036
OMI,CMGPS36
OMI,CPC100PTS35
OMI,CPCB235
OMI,CPCU135
OMI,CPSB135
OMI,CPSTEP35
OMI,CP-TD135
OMI,CTANALYZER34
OMI,DIRANA35
OMI,FRA34
RISER BOND
RB,1205T-OSP24
ORIFLOW
ORI,COBRA58
PCWI
PCW,DC3052
PCW,P40-PULSE54
PETROSENSE
PET,PHA-10064
PHANTOM
PHA,5355056
PHENIX TECHNOLOGIES
PHE,BK13034
POLYSONICS
POL,HYDRA-SX30-250
PONOVO
PON,CT200I35
PON,L336I36
PPM TECHNOLOGIES
PPM,HTV-M64
PROCEQ
PRO,2000-ND60
PRO,PROFOSCOPE60
PRO,RESIPOD60
PRO,SIL-UN60
PRO,PL-200E60
PROTIMER
PRO,MMS-PLUS60
PROFOUND
PRO,VIBRA56
PRO,VIBRA-PLUS56
PRUFTECHNIK
PRU,AL12.11642
PRU,ROT-ULTRA42
RAE SYSTEMS
RAE,MR300064
RAE,PPB300064
RF SYSTEMS LAB
RFS,VJ-ADV41
RION
RIO,NL52EX-NX42RT68
RIO,VA-1156
RIO,VA-1256
TES,SAV2-H2-10KIT49
WOH,VIS350-PT62
TMS
TMS,9110D-WOB56
YOKOGAWA
YEW,51001-NATA69
TOUR & ANDERSON
TA,CBI59
TA,SCOPE59
RKI INSTRUMENTS
RKI,EAGLE265
TPS
TPS,90FL-T68
TPS,WP-80M68
TPS,WP-8869
ROHDE & SCHWARZ
RS,FSH3-TG14
RS,NRT17
TR
TR,RF-CONN17
TR,VIBLOG56
ROTOTHERM
ROT,C10547
ROT,C105-6K47
TSI
TSI,756567
TSI,832458
TSI,837559
TSI,838059
TSI,8386A59
TSI,852565
TSI,853065
TSI,8530-ENC65
TSI,8530-ENC-S65
TSI,853365
TSI,855467
TSI,871059
TSI,953559
TSI,955559
TSI,9565A59
TSI,AM51065
TSI,TA465A59
ROVER
ROV,HD COMPACT
10
SEWARD
SEW,XE3760PKIT+25
SCHAFFNER
SFN,43811
SFN,MODULA 6100
11
SI PRESSURE INSTRUMENTS
SI,PC6-20-NATA46
SI,PC6-35-NATA46
SOFTING
SOF,PROFIBUS-445
SORENSEN
SOR,DCS150-20E10
SOR,DCS60-5010
SOR,XFR600-410
SVANTEK
SVA,SV10056
T&R TEST EQUIPMENT
T&R,CIT36
T&R,DVS3-HP36
TEKTRONIX
TEK,MDO31049
TEK,P60159
TEK,TDS30549
TEK,THS730A9
TEK,TPS20149
TESTO
TES,175-H149
TES,184G1-KIT1049
TES,33551
TES,350XL51
TES,41758
TES,42058
TES,44558
TES,635-267
TES,635-2-HPD67
TES,645-167
TES,84539
Can’t see what
you’re looking for?
New items are being added to
the inventory constantly, so
please call us on 1800 632 652
to discuss your requirements
UE SYSTEMS
UES,UP300061
VAISALA
VAI,WXT520-KIT69
VAN ESSEN
VAN,DI50269
VEEX
VEE,TX-130+20
VEE,TX-130E+20
VEEX,MX100E+19
VEEX,TX-130M+20
VEHICLE COUNTS
VEH,PC250056
VERMASON
VER,222ES8
VIVAX
VIV,VCAM5-60M62
VIV,VLOCPRO61
VIV,VLOCPRO61
WIKA
WIK,GA-1564
WOHLER
WOH,VIS2000PRO62
WOH,VIS34062
WOH,VIS340-PT62
7
Electronics
Multimeters & Electrometers Digital Storage Oscilloscopes
Function Generators
LCR Meters
TV Test Equipment
Gauss/Tesla Meters
Multimeters & Electrometers
See also Electrical Testers on page 24
Fluke 28II EX Intrinsically Safe True-RMS Multimeter
FLU,28II-EX (1239) AU
Intrinsically Safe Multimeter is a completely
sealed IP67 rated case. For use inside and
outside of hazardous zones. Measures up
to 1000V, 10A AC and DC with true-RMS for
accurate measurement on nonlinear signals.
Frequency measurements to 200kHz, resistance,
conductance, diode test, capacitance, and temperature. Results
are displayed on the bright, 4-1/2 digit LCD (20,000 counts).
Fluke 87-5 Industrial True-RMS Multimeter with Thermometer
FLU,87-5 MY
Unique function for accurate voltage and frequency
measurements on adjusatable speed motor drives
and other electrically noisy equipment.True-RMS AC
voltage and current for accurate measurements on
non linear signals. Built in thermometer. Measure up
to 1,000VAC and DC. Measure up to 10A (20A for 30
seconds). 10,000µF capacitance range. Frequency
to 200kHz and % duty cycle. Peak capture to record
transients as fast as 250μs. 4½ digit mode.
Multimeters & Electrometers cont’d.
Keysight 34461A Digital Multimeter 6½ Digit Truevolt
KEY,34461A (1230) AU
Precision 6.5 digit multimeter.
100% drop-in 34401A compatibility,
graphical views of your measurement
results, long-term trends and
measurement histograms for a
statistical view. Control, capture and view your DMM’s data on
your PC. Measures noise and injected current, input bias current,
AC RMS (3Hz to 300kHZ), DC and AC V (100mV to 1000V),
resistance (100Ω to 100MΩ), frequency, period, continuity,
diode (5V), current and temperature. Using TrueVolt technology
the analogue to digital convertor displays results on a clear
11cm hi-res display.
Vermason 222541 Electrostatic Meter
VER,222ES (1245) AU
Electrostatic meter for periodic audits of facilities,
monitoring packaging, materials, machines
and other electrostatic generative equipment
or processes. This precision field meter is
designed to measure electrostatic voltage
potentials over selected distances from 1 to
20cm. Range at the standard distance of 2cm
is 20kV. Two range 3 digit display in V or kV.
Keysight DSOX3024A Oscilloscope 200MHz 4 Channels
KEY,DSOX3024A (1350) AU
4 channel 200MHz digital storage
oscilloscope. Sampling rate 2G/s (4G/s
half-channel interleaved mode). 2Mpts
memory depth, waveform update rate
1 million waveforms/s, sensitivity 1mV/
div to 5V/div. Built-in 20MHz function/arbitrary waveform
generator. Pass/fail masks can be automatically created based
on an input reference waveform or on a PC then imported
via USB, also store and remove waveforms via USB.
Fluke 289 True-RMS Logging Multimeter with FlukeView Software
FLU,289 FLUKEVIEW (1236) AU
Complete with a built-in data logger to record
measurements unattended. Internal memory allows
stand-alone logging for up to 180 hours. True rms
50,000-count ¼ VGA dot matrix display. 0.025%
Basic DC accuracy. CAT III 1000V/CAT IV 600V
safety rated. Supplied with FlukeView software
and download cable.
See also Data Loggers on page 48-49
Keysight MSO6104A 1GHz Digital Oscilloscope with Logic
KEY,MSO6104A (1320) AU
1GHz 4 + 16 channel mixed signal
oscilloscope (MSO). 4Gsa/s. XGA Colour
display updates 100,000 waveforms/s with
256 levels intensity. 4 analogue channels
& 16 logic channels. Deep memory. 8 digit
frequency counter function. Triggering includes video, HDTV,
I2C, SPI, LIN, CAN, & USB. FFT analysis included. LAN, USB,
GPIB, & XGA interfaces standard. NATA Certified.
Keysight U1253B OLED Digital Multimeter
KEY,U1253B (1225) AU
True RMS 4.5 digit handheld digital multimeter
(DMM). Up to 0.025% basic DCV accuracy. Organic
LED (OLED) display that provides razor-sharp
readings even in dark, off-angle situations. Internal
logging and virtual unlimited data recordings
to PC with the data-logging software included.
Integrated 20MHz frequency counter, and a built-in
programmable square-wave generator with selectable frequency
and duty cycle. Safety rating CAT III 1000V and CAT IV 600V.
Smoothing function. Internal logging memory 1000 Points.
8
Keysight U1620A 200MHz Handheld Digital Oscilloscope
KEY,U1620A MY
With up to 2GSa/s sampling rate and 2 Mpts
memory depth, this 200MHz two channels
handheld scope captures more waveforms from
signals such as pulse width modulated circuit, in
rush, transient, and motor start up sequences.
Channel to channel isolation with CATIII 600 V
safety ratings, 10,000-count resolution on DMM
display and data logging capability to PC.
1800 632 652
Electronics
Digital Storage Oscilloscopes cont’d.
Fluke 199C 200MHz 2 Channel Scopemeter with DMM
FLU,199C-SCOPEMETER (1360) AU
200MHz bandwidth 2 channel colour digital
oscilloscope with DMM feature. 14.4cm colour
display with persistence feature. 2.5GS/s real
time sampling. Input sensitivity 5mV/div to
100V/div. Glitch capture 3ns using pulse width
triggering. Timebase range in scope mode 5ns/
div to 2min/div. Trigger types Auto, Free Run,
Single Shot, Edge, Delay, Video, Video line,
Selectable pulse width and External. Automatic
capture and replay of last 100 screens. Measures electrical
power properties such as VA VAR, etc. Isolated inputs.
Probes and Accessories
Fluke 80i-110s AC/DC Current Probe
FLU,I-PROBE (1460) AU
Current clamp for oscilloscopes which uses a Hall
effect cell for the measurement of DC or AC current.
Measures currents from 0.05 to 100A peak.
A thumbwheel can be used to reset zero for adaption
to the measurement environment. The clamp can be
used with any measurement instrument which has
a BNC input and an impedance of 1MΩ, <100pF.
Maximum conductor diameter, 11.8mm.
Fluke 80K-40 High Voltage Probe
FLU,80K-40 (1480) AU
Fluke 200MHz 4 Channel ScopeMeter 190-204/S
FLU,SCOPEMETER 204 (1361) AU
200MHz 2.5GS/s (1.25GS/s 4ch), 4 channel
digital oscilloscope. Features Persistence mode,
Connect-and-View triggering for intelligent,
automatic triggering on fast slow and complex
signals. 10,000 points per trace waveform
capture (scope mode), USB host port for direct
data storage, automatic capture and replay
of 100 screens. Roll mode gives 30,000 points per channel
for low frequency signal analysis, TrendPlot paperless recorder.
Isolated inputs and safety rating CAT III 1000V/CAT IV 600V.
1 to 40kVDC or peak AC, 28kVAC rms. Input
resistance 1GΩ, division ratio 1,000:1. Note:
input impedance of DVM must be 10MΩ or reading will be wrong.
Tektronix P6015 40kV High Voltage Probe
TEK,P6015 (1490) AU
Bandwidth 75MHz. Input rating: 40kV pulse, 20kVDC plus peak
AC. Derating with frequency applies. Input impedance 100MΩ.
Attenuation x 1000.
Function Generators
Tektronix MDO3104 1GHz Mixed Domain Oscilloscope
TEK,MDO3104 MY
1Ghz, 4 channel oscilloscope with 50MHz
arbitrary function generator, 16 logic
channels and a 3GHz spectrum analyzer.
Sampling rate 5GS/s, 10M record length.
FasAcq feature allows for intensity grading
of rarely occurring events, such as runt pulses, glitches,
timing issues, and more. USB support for transferring or saving
results and settings and PC control using OpenChoice software.
See also RF Signal & Sweep Generators on page 12
Keysight 33612A 80MHZ 2 Channel Waveform Generator
KEY,33612A (1612) AU
80MHz, 2 channel waveform generator, sine,
square, pulse, ramp, triangle, Gaussian noise,
PRBS and arbitrary waveforms. Capable of
modulation, sweep, burst, waveform summing and combining.
Maximum output into 50Ω, 1mVpp to 10Vpp. Up to 120MHz sine
and Gaussian noise at <= 4 Vpp. Memory is 4M Samples deep.
Tektronix TDS3054B 500MHz 4 Channel DSO
TEK,TDS3054 MY
Sampling rate 5GS/s. Memory length 10k. Sensitivity 1mV
to 10v/div. Time base 1ns to 10s/div. Trigger functions
include video. Extensive automatic waveform measurements.
Including FFT, TV trigger, advanced analysis (TDS3AAM),
and limit testing (TDS3LIM). Battery operation.
Tektronix THS730A 200MHz Battery DSO
TEK,THS730A MY
Dual channel battery portable 200MHz digital
storage oscilloscope with digital multimeter
facilities. Maximum sampling rate 1GS/s.
Maximum input 640V rms, maximum float
600V rms. Waveform processing including watts
calculations. Video trigger. RS232 interface.
Tektronix TPS2014 100MHz Channel Powerscope
TEK,TPS2014 (1370) AU
Sampling rate 1GS/s. All 4 channels isolated
for floating measurements. Sensitivity 2mV to
5V/div. Measurements for current and voltage
distortion and their spectral content, harmonics,
instantaneous power, power factor and switching
loss. Automatic waveform measurements. FFT, power analysis,
low & high voltage power probes (P5120). Battery operation.
LCR Meters
Hioki 3532-50 5MHz LCR Meter
HIO,LCR 3532-50 (1290) AU
Frequency range 42Hz to 5MHz. 5ms high
speed measurements. Basic accuracy
of ±0.08%. Memory for 30 sets of
measurement conditions, including comparator values. Includes
correlation correction function, interactive touch panel operation
and enlarged display function. Applications include laboratory use
for evaluation of operating characteristics, production line use or
R&D. Measurement data captured by a personal computer can
be displayed graphically by using standard spreadsheet software.
Keysight 6675A DC Power Supply
KEY,6675A MY
102VDC, 18A, 2000W, auto-parallel up to five units, output can be
connected in series, programmable over-voltage and over-current
protection, over-temperature protection, Discrete Fault Indicator/
Remote Inhibit (DFI/RI), self-test occurs at power-on from an GPIB
command, user definable power-on state and VXI plug & play drives.
9
Electronics
DC Power Supplies & Loads cont’d.
Kikusui PLZ1003W Electronic Load
KIK,PLZ1003W (8110) AU
1000 watt electronic load. Voltage
range 1.5 to 120V. Current range 0
to 200A. Provides constant current,
resistance, voltage, and power modes
(CC/CV/CR/CP). A multiple number of setting conditions can be
stored in memory. Sequence function allows setting conditions to
be changed automatically. Applications include characteristic or
lifetime tests of a variety of DC voltage sources such as switching
power supplies, primary and secondary batteries or as burn in loads.
Keysight 66332A Dynamic Measurement DC Source
KEY,66332A MY
Programmable DC Source. 0 to 20V, 0
to 5A. Built-in advanced measurement
system to accurately measure battery
current drains. Battery emulation function.
See also Industrial Process Calibrators on page XX
Fluke 5500A Multi Product Calibrator with NATA Calibration
FLU,5500A-NATA (1660) AU
FLU,5500A MY
Calibrator sources direct voltage
& current, alternating voltage and
current, with multiple waveforms and
harmonics, 2 simultaneous voltage outputs or voltage & current.
Simulates power with phase control, resistance, capacitance,
thermocouples and RTDs. Selectable ranges include the following
outputs Vdc from 0 to 1.02kV, Vac from 1mV to 1.02kV with
output from 10Hz to 500kHz. AC current from 0.01µA to 11A
with output from 10Hz to 10kHz. DC current from 0 to 11A.
Resistance values from short circuit to 330MΩ. Capacitance
values from 330pF to 1,100µF. Temperature t/c B, C, E, J, K, L, N,
R, S, T, U, RTD Pt385 100Ω, Pt3926 100Ω, Pt3916 100Ω, Pt385
200Ω, Pt385 500Ω, Pt385 1kΩ, Ni120 120Ω & Cu427 10Ω.
Genrad 1433B 1.1MΩ 6 Decade Resistance
Keysight N6702A Low Profile Modular Power System Mainframe
KEY,N6702A MY
Modular power system mainframe
comes with 2 x N6762A precision
DC power modules(100 watts),
1U high. Each modules capable of 0 to 50V, 0 to 3A.
GPIB, LAN, and USB, interfaces standard, and LXI compliance.
Sorensen DCS 150V, 20A DC Power Supply
SOR,DCS150-20E (8130) AU
0-150V, 20A, 3KW. Applications range
from manufacturing test and burn-in of
automotive components, avionics electronics, telecommunications
and consumer products to beam steering, process control,
laboratory R&D use. Remote control via LAN or RS232.
Sorensen DCS60-50 60V 50A DC Power Supply
SOR,DCS60-50 (8140) AU
0 to 60V, 0 to 50A. Maximum power on a 240V three phase
supply is 3kW. Maximum power on a one
phase 240V supply is 2.5kW. On One
phase 50V@50A or 60V@42A.
Remote programming.
GR,1433B-NATA (1670) AU
Six decades by 1Ω to 1.1MΩ. Accuracy 0.01%. NATA calibrated.
Genrad 1433F 111kΩ 7 Decade Resistance Box
GR,1433F-NATA (1680) AU
Seven decades by 0.01Ω to 111kΩ. Accuracy 0.01% +0.002Ω.
Useful for platinum resistance thermometer calibration.
NATA calibrated.
Genrad 1433-20 11.1111kΩ 6 Decade Resistor
GR,1433-20 MY
Six decades by 0.01Ω per step to
11.1111kΩ. High accuracy 0.01% up to
10MΩ steps. Low temperature coefficient,
5ppm/˚C. Good frequency characteristics, excellent stability
(10ppm/yr, 25ppm/3yrs), low zero resistance (1MΩ per decade).
May be used for RTD stimulation. Rack mount option.
Gauss/Tesla Meters
FW Bell Gauss/Tesla Meter
BEL,4190 (1969) AU
Sorensen XFR 600-4 600V 4A Power Supply
SOR,XFR600-4 (8120) AU
2.4kW programmable DC power supply 0~600V, 0~4A
with remote analog programming.
TV Test Equipment
See Network Analysers/Antenna and Cable Test on page 14, 16
Rover HD Compact Combined TV Analyser
ROV,HD COMPACT (1748) AU
For the installation, maintenance and
commissioning of terrestrial, satellite and
cable TV systems DVB T/C/S/S2. The HD
Rover can perform measurements that include
power level, MER, BER, noise margin, SNR,
EVM, network and streams ID’s as well as MPEG4 HD programs
for DVB-T & C. The meter has a USB port for, software upgrades,
channel plan modifications and data logging. Foxtel approved.
10
Handheld digital ELF gauss meter. Maintains
accuracy regardless of orientation. Applications
include detecting magnetic field emissions from
overhead AC power lines, video display terminals,
office equipment and household appliances.
Analogue o/p, data logging, auto range 0.1 to
1999 mG, minimum resolution 0.1mG/.01 uT.
FW Bell 5180 Gauss/Tesla Meter
BEL,5180 (1960) AU/MY
Magnetic measuring equipment, portable
gaussmeter. Built-in software eliminates the
need for complex calibration procedures. Key
features include Auto Zero, Min/Max/Peak Hold,
Auto Range and Relative Mode. Allows the user
to select Gauss, Tesla or Ampere/Meter readings.
With Hall effect transverse probe STD18-0404.
Frequency bandwidth DC - 30kHz, range from
0 up to 30 kG with a basic accuracy of 1.1% (FS). Analogue
output (+/-3V FS) and USB interface. Battery operated.
1800 632 652
Electronics
E & H Field Strength Meters cont’d.
See also Radiation Montioring & Protection on page 68
Holaday HI-3604 E & H Survey Meter ELF
HOL,HI-3604 (1945) AU
Low frequency field meter. Designed to evaluate electric and
magnetic fields associated with 50Hz power lines. Frequency
range 30 to 2,000Hz. Measures magnetic fields from 0.1
milligauss to 20 gauss. Measures electric fields from 1 volt/meter
to 200 kilovolts/meter. LCD display. 127 reading data memory.
Narda NBM-550 ‘E’ Field Strength Meter and Probe EF1891
NAR,NBM-550 (1930) AU
Field strength meter with EF1891 ‘E’ field probe.
Detects electric fields from 3 MHz to 18GHz,
covering fields generated by broadcasting,
telecoms, radar and any other transmission sources
within this range. Dynamic range from 0.6V/m
to 1,000V/m. Includes GPS, data logging, voice
recording annotation and fibre optic cable with
optical to electrical converts for remote monitoring.
Holaday HI-3627 Magnetic Field Meter
Three orthogonal field sensors. Dynamic range
0.2mG~20G. True RMS detection. Frequency
range 5Hz to 2kHz with an in-built 30Hz high
pass filter. Meets requirements of the Swedish
protocol and the IEEE P-1140 protocol.
Schaffner 438 30kV Static Discharge Generator
HOL,HI-3627 (1980) AU
Narda NBM-520 ‘E’ Field Strength Meter and Probe EF1891
NAR,NBM-520 (1925) AU
Field strength meter with EF1891 ‘E’ field probe.
Detects electric fields from 3 MHz to 18 GHz, covering
fields generated by broadcasting, telecoms, radar
and any other transmission sources within this
range. Dynamic range from 0.6V/m to 1,000V/m.
Applications include measuring field strengths to
comply with general safety regulations and actual
radiated power. Includes fibre optic cable with
optical to electrical converts for remote monitoring.
SFN,438 (8375) AU
Generates an electrostatic charge in a range
from 2 to 30kV. This instrument is in a ‘gun’
form. Has a removable discharge network
which can be interchanged with other (optional)
impedance networks. Performs test to
IEC61000-4-2 (AKA, IEC 1000-4-2) standards.
Schaffner Modula-6100 Immunity Test System
SFN,MODULA 6100 (8380) AU
Multifunction generator to simulate electromagnetic field interference effects for immunity
testing in conformity with international,
national and in house standards including
the new IEC/EN standards. Generates Interference pulses
such as burst and surge and power quality simulations.
Training with TechRentals
TechRentals works in conjunction with industry leaders like Fluke, Megger, Omicron, Keysight, GE and Anritsu
to provide training opportunities across a wide range of sectors including:
• Electrical Power
• General Industrial Testing
• Physical Measurement
• Data and Telecommunications
• Construction
• Radio Frequency
• Electronics
• Environmental and OH&S
These partnerships allow TechRentals to offer training seminars, instrument specific tutorials, and other content in various
formats to enhance the technical experience and skills of our customers. Of particular value are our training short courses,
the latest of which have included transformer testing, power quality analysis, and Australian fibre and copper standards (with
an introduction to encircled flux). These valuable seminars provide insights into the latest equipment and protocols, with
hands on demonstrations on how they benefit industries in the field. Please email [email protected] to be kept
informed of upcoming courses.
Visit our wiki for product manuals, how-to
videos, and application notes at https://sites.
google.com/a/techrentals.com.au/wiki/
Check out our YouTube site for over 100 training,
practical demonstration and technical information
videos at http://www.youtube.com/techrentals
11
Radio Frequency
Frequency Counters
Power Meters - RF
RF Amplifiers
RF Attenuators
Antennas
RF Accessories
See also Function Generators on page 9
Keysight 8648D-1E5 4GHz Signal Generator
KEY,8648D (2330) AU
KEY,8648D-1E5 MY
Aaronia Spectran HF-60105 9.4GHz Handheld Spectrum Analyser
AAR,HF-60105 MY
Portable. 9KHz to 9.4GHz comes attached
with directional antenna. DANL -155dBm
(1Hz) with preamp DANL -170dBm (1Hz).
RBW 200Hz to 50MHz. Demodulator for
AM/FM/PM/GSM. 1MB memory with USB
interface for trace download. Maximum power
+20dBm. Suitable for cellular walk or drive coverage testing.
Advantest 31.8GHz Portable Spectrum Analyser
ADV,U3771 MY
Portable 9kHz to 31.8GHz spectrum
analyser. 3 way power. Battery,
240V & DC. RBW 100Hz to 3MHz,
sensitivity -117dBm@34GHz (typ).
High-stability reference. Includes a
wide variety of data analysis functions
& zoom function. With signals applied to both Input 1 and
Input 2, two signals such as an IF signal and a carrier can be
measured. Support for USB for printer and memory. Storage
image formats: PNG, BMP, configuration file BIN, XML.
Signal generator, 9kHz to 4GHz with AM/FM/
Phase modulation output range from +10 to
-136dBm with +/-1dB accuracy up to 2.5GHz. 0.001Hz resolution.
Complete with option 1E5 high stability timebase (<±0.1ppm/yr).
Keysight N9344C 20GHz Spectrum Analyser with Tracking Generator
Keysight E4438C ESG Vector Signal Generator
9kHz to 20GHz with 5MHz to 7GHz
tracking generator. -144dBm displayed
average noise level (DANL), <0.95s
sweep time for 20GHz full span. Average
continuous power, +30dBm for 3 minutes
maximum. Flexible remote control via USB/LAN. User memory
64MB, able to store approximately 14,000 traces.
KEY,E4438C MY
Vector signal generator, 250kHz to 3GHz.
Built-in function generator. Wideband AM
and FM. Internal baseband generator
(8 Msa), internal bit error rate analyser,
GPS personality, waveform playback and 6GB internal storage.
KEY,N9344C-TG (2537) AU/MY
Keysight N9344C 20GHz Spectrum Analyser with GPS
KEY,N9344C (2538) AU
Keysight N5181B MXG X-Series 6GHz RF Analog Signal Generator
KEY,N5181B (2328 AU
MXG-X RF Analog Signal Generator, 9k to
6 GHz, -144 to +19dBm. Features fast
switching, low phase noise, pulse, and
narrow pulse, AM, FM, phase modulation
and sweep. Applications include R&D, receiver and component
testing. 1000BaseT LAN, LXI, USB 2.0, and GPIB interfaces.
Frequency Counters
See also Electronics on page 8
9kHz to 20GHz with GPS. -144dBm
displayed average noise level (DANL),
<0.95s sweep time for 20GHz full span.
Average continuous power, +30dBm for 3
minutes maximum. Flexible remote control via USB/LAN. User
memory 64MB, able to store approximately 14,000 traces.
Keysight N9030A PXA Signal Analyser
KEY,N9030A MY
Real-time spectrum analyser, 3Hz to
26.5G with built-in Pre-Amp (+20dB) and
electronic attenuator(24dB) both up to
3.6GHz. 8 inch XGA display. Run on Windows 7. USB storage port.
Included software: N9051A-Pulse Measurement, N9036A-Analog
Demodulation Measurement and N9064A-VXA Signal Analysis.
Keysight 53181A 3GHz Frequency Counter
KEY,53181A AU/MY
3 GHz frequency. Option 010 high stability
timebase included. HPIB interface. PC based
Benchlink meter software available.
Keysight 5350B 20GHz Frequency Counter
KEY,5350B MY
Microwave frequency counter. 10Hz to 20GHz. HPIB interface.
12
Anritsu MS2711A 3GHz Portable Spectrum Analyser
ANR,MS2711A MY
Portable. 9kHz to 3GHz. Light weight
battery powered spectrum analyser with
LCD. Resolution bandwidth down to 10kHz.
Suitable for cellular telephone walk or
drive tests to determine coverage and base
station positioning. Can also be used for
VHF/UHF signal surveying. N type connector.
Managed Service Radio Solution
Ensure your radio communications are operating to their full potential
with state-of-the-art Motorola two way radios.
Channel Partner
hirecom
www.trhirecom.com.au
A Managed Service with TR Hirecom includes the following:
3 Ongoing Service and Maintenance
3 Radio Support Program
• All equipment is tested and programmed by trained,
professional personnel before it is sent out
• Trained and experienced staff are available to assist
you with any queries, training requirements and/or troubleshooting you may have
3 Battery Maintenance and Replacement Program
• A battery maintenance program is provided throughout
the managed service period
• Periodic and/or as required testing and reconditioning,
with immediate replacement of faulty batteries
3 Immediate replacement of faulty radios
• We aim to have any faulty equipment replaced in a
time critical manner so on-site disruptions are minimised
3 Account Processing Minimisation
• No Capex account process required
3 Product Training and Support
• TR Hirecom will develop and present a training package
to ensure all of your staff are confident and familiar with their new assets
• This training package will be delivered by experienced
TR Hirecom staff in a ‘train the trainer’ style so key personnel can pass this on to their relevant staff
Equipment Upgrade Pathway
As your two way radio needs change, TR Hirecom will work closely with you in evaluating your radio communications. With
the ability to upgrade your fleet and avoid obsolescence at
the end of your rental period, you can be assured that your
communications systems will always be operational, with the very latest in two way radio technology.
Read about Adelaide Brighton Cement’s upgrade to
digital two way radios, and how a Managed Service
transformed their onsite communications!
For more information, contact us today:
1800 222 327
[email protected]
Radio Frequency
Spectrum Analysers - High Frequency cont’d.
Anritsu MS2712E 4GHz Spectrum Analyser with Tracking Generator
ANR,MS2712E (2560) AU
Portable hand held spectrum analyser 9kHz
to 4GHz, DANL -146 dBm in 1Hz RBW, RBW
1Hz to 3MHz. Tracking generator -50dBm to
0dBm in 0.1dB steps and GPS. Applications
include, spectrum monitoring, broadcast
proofing, RF and microwave measurements,
Wi-Fi and wireless network measurements.
Store up 2,000 traces and setups on board or on USB flash drive.
One-button envelope creation, Trace Save-on-Event feature.
Network Analysers/Antenna & Cable Test cont’d.
Anritsu MW82119B 2,100MHz PIM Master
with Site Master Option
ANR,MW82119B-2100 (2198) AU
Passive Intermodulation (PIM) analyser with
measurement frequency 2,100 MHz and
Site Master (cable and antenna analysis)
options. Portable battery-operated, high power
for the major wireless standards. Verify PIM
performance at difficult to access sites such
as Remote Radio Head (RRH) installations or
indoor Distributed Antenna Systems (DAS).
PIM measurements include PIM vs time, sweep PIM, distance to
PIM (DTF), 1-port phase and smith chart.
Anritsu MS2721A 7.1 GHz Spectrum Analyser
ANR,MS2721A (2550) AU
100kHz to 7.1GHz. For deploying,
maintaining and troubleshooting
wireless base stations and Wi-Fi
(802.11a, b and g) systems, and
general spectrum analysis. Smart
measurements include channel power,
adjacent channel power ratio, carrier to interference ratio
and field strength. AM/FM/SSB demodulator included and
internal speaker for monitoring. DANL -153 dBm at 1GHz.
Phase noise -100dBc/Hz at 10KHz. Store unlimited traces
and setups. Remote programming via Ethernet port.
Rohde & Schwarz FSH3 3GHz Spectrum Analyser/Tracking
Generator/Vector Measurement
RS,FSH3-TG MY
Handheld portable battery operated spectrum
analyser 100kHz to 3GHz. Resolution
bandwidth 1kHz to 1MHz. Less than -105dBm
noise level (-114dBm typical). Suitable for
RF surveying applications. Includes vector
transmission and tracking generator options.
Anritsu MW82119B 850MHz PIM Master
with Site Master Option
ANR,MW82119B-850 (2199) AU
Passive Intermodulation (PIM) analyser with
frequency, Cellular 850MHz band and Site
Master (cable and antenna analysis) options.
Portable battery-operated, high power for
the major wireless standards. Verify PIM
performance at difficult to access sites such
as Remote Radio Head (RRH) installations or
indoor Distributed Antenna Systems (DAS).
PIM measurements include PIM vs time, sweep PIM, distance to
PIM (DTF), 1-port phase and smith chart.
Anritsu S331D 4GHz Colour Sitemaster Antenna
ANR,S331D MY
Antenna and cable test set. Frequency
range 25MHz to 4GHz. Measures return
loss, SWR, cable loss, and distance to
fault. Return loss range 0 to 60dB. SWR
range 1 to 65. Distance to fault range
1,197m. Insertion loss range -120 to
+100dB. Cable loss range (one port) 0 to 30dB. N(f) Type port.
Analysis software discs included containing distance to fault and
Smith chart tools. Complete with calibration standard,
AC/DC adaptor, and 12VDC car cigarette lighter adaptor.
Keysight E5071C-260 ENA Series Network Analyser
KEY,E5071C (2744) AU/MY
2 port 9 kHz to 6.5 GHz network analyser
with integral S-parameter test set.
Dynamic range >123dB. High stability
timebase. Applications for manufacturing
and R&D engineers evaluating RF
components and circuits for frequencies up to 6.5GHz.
Calibration kit 85032F included. LAN/USB/GPIB connectivity.
Anritsu S331E 4GHz Sitemaster Cable & Antenna Tester
ANR,S331E (2180) AU/MY
Cable and antenna analyser, frequency
range 2Mhz to 4GHz. Measures return
loss, VSWR, cable loss, and Distance
To Fault. Suitable for legacy networks in
addition to the new 3G and 4G networks
being installed. Applications include cable & antenna installation
and maintenance for wireless service providers.
Keysight N9913A FieldFox 4GHz Cable & Antenna Analyser
KEY,N9913A (2145) AU
range 30kHz to 4GHz. Measures return loss,
one-port cable loss, distance to fault, line
sweeping, and VSWR. Applications include
cable & antenna installation and maintenance
for wireless service providers, contractors,
military, aerospace, defence, and public safety
applications. Includes, spectrum analyser
(233), vector network analysis (210) with full 2 port S-parameters
(211), QuickCal (112) and remote control capabilities.
14
Anritsu S331E 4GHz Sitemaster Cable
& Antenna Ana w Opt 21
ANR,S331E-21 (2179) AU
Cable and antenna analyser with 2 port
transmission option (21), frequency range
2Mhz to 4GHz. Measures return loss,
VSWR, cable loss, and Distance To Fault.
Suitable for legacy networks in addition to the new 3G and 4G
networks being installed. Applications include cable & antenna
installation and maintenance for wireless service providers.
Radio Frequency
Network Analysers/Antenna & Cable Test cont’d.
Anritsu S331L 4GHz Sitemaster Cable & Antenna Analyser
General Dynamics R8000B Communications Analyser
ANR,S331L (2178) AU
GD,R8000B (2380) AU
range 2Mhz to 4GHz. Built in power meter
50MHz to 4GHz, -33dBm to +20dBm.
Measures return loss, VSWR, cable loss,
and Distance To Fault. Suitable for legacy
networks in addition to the new 3G and
4G networks being installed. Applications include cable
& antenna installation and maintenance for wireless service
providers, contractors, military, aerospace, defence, and public
safety applications.
Portable test instrument designed to monitor
and service radio communications equipment
up to 1GHz. It generates and receives signals,
measures modulation and frequency, and
performs a variety of tests on AM, FM, PM and
optional digital standards P25, DMR, NXDN
and TETRA radio transceivers. Features include, enhanced spectrum
analyser, oscilloscope and tracking generator. Power handling
capabilities without external attenuator is 50W for 5 min, up to a time
limited 150W (see equipment specifications to avoid damage).
Anritsu S332D Colour Sitemaster Antenna Tester
Aeroflex IFR 2945B Communications Service Monitor
ANR,S332D MY
Antenna and cable test set including
spectrum analyser. Frequency range 25 to
4,000MHz. RBW 100Hz to 1MHz. Measures
return loss, SWR, cable loss, and distance
to fault. N(f) Type port. Analysis software
containing DTF and Smith chart tools included. Complete with
calibration standard, AC/DC adaptor, and 12VDC car adaptor.
Anritsu S332E Sitemaster including Spectrum Analyser
ANR,S332E (2175) AU
Antenna and cable analyser 2MHz to 4GHz
and spectrum analyser 100KHz to 4GHz.
DANL -152dBm. Measures return loss,
VSWR, cable loss, and Distance To Fault.
N(f) Type port. Analysis software containing
DTF and Smith chart tools included.
Complete with calibration standard, AC/DC adaptor, and 12VDC
car adaptor. Cable & antenna installation and maintenance for
wireless service providers, contractors, military, aerospace and
defence, and public safety applications.
IFR,2945B (2390) AU
Communications Service Monitor is
ideally suited to the testing of two way
radios and trunking repeaters allowing
verification of performance, and rapid
diagnosis of faults. Includes a combination of test instruments
such as a full performance spectrum analyser, oscilloscope
and tracking generator. Frequency range 400kHz to 1.05GHz.
Power Meters - RF
Keysight E9300A Power Sensor 1µW to 100mW, 10MHz to 18GHz
KEY,E9300A (2125) AU/MY
Power sensor for HP EPM series power meters. E-series Average
Power Sensor. 10MHz to 18GHz, 1µW to 100mW (-60dBm
to +20dBm).
Keysight Agilent E9300B Power Sensor 1µW to 25W, 10MHz to 8GHz
KEY,E9300B (2135) AU/MY
Anritsu S332E Sitemaster Including Spectrum Analyser
and Opt 431,31,509
ANR,S332E-CMAP-MOD (2165) AU
Antenna and cable analyser 2MHz to 4GHz
and spectrum analyser 100KHz to 4GHz.
DANL -152dBm. Options included, indoor
outdoor Coverage Mapping, GPS Receiver and
AM/FM/PM Analyser. Measures return loss,
VSWR, cable loss, and distance to fault. Analysis software containing
DTF and Smith chart tools included. Cable, antenna, installation
and maintenance spectrum analysis, coverage mapping and AM/
FM/PM demod for wireless service providers, contractors, military,
aerospace and defence, and public safety applications.
Anritsu S820D Microwave Sitemaster 25MHz to 20GHz
ANR,S820D (2150) AU/MY
Microwave antenna and cable test set.
Portable single port analyser, providing return
loss (SWR) insertion loss and distance to
fault measurements in the frequency range
of 25MHz~20GHz. Unit comes standard
with RS232 interface, Smith chart and software management
tools, AC/DC and automotive adaptor. A comprehensive range of
precision waveguide components and adaptors are available.
Power sensor for HP EPM series power meters.
E-series average power sensor. 10MHz to
18GHz, 1µW to 25W (-30dBm to 44dBm).
Keysight E4416A EPM P-Series Power Meter
KEY,E4416A MY
Power meter, for peak, average, peak-to-average
ratio and time-gated measurements. 100µW to
25W (-70dBm to 44dBm), 9 kHz to 110GHz
(power sensor dependent ), 4 digit display - watts,
dBm, dB (rel). Analyser Software for complete pulse and statistical
analysis. 8 pre-defined wireless configurations (GSM, EDGE,
NADC, iDEN, Bluetooth™, IS-95 CDMA, W-CDMA and cdma2000).
Comes with E9322A Peak & Average Power Sensor (50MHz to
6GHz, 1.5MHz bandwidth, -45dBm to +20dBm at Normal Mode).
Keysight E4418B E Series Power Meter
KEY,E4418B-001 MY
Keysight E4418B E series power meter. 100uW to 25W (-70dBm
to 44dBm), 9 kHz to 110GHz (power sensor dependent), 4 digit
display - watts, dBm, dB (rel). Battery or mains powered. Power
sensor required, select and specify when ordering.
Anritsu Sitemaster Waveguide Components
Bird 43 Power Meter
Calibration components and wave guide to co-ax adaptors for
Anritsu S820x Sitemaster. Set includes 1/8 and 3/8 shorts,
termination, and waveguide to co-ax adaptor.
RF thruline power meter. Requires Bird element of specified
frequency and power. Measures forward and reflected power
by reversing the element.
ANR,WAVEGUIDE-ADAP (2190) AU/MY
16
BIR,43 MY
1800 632 652
Radio Frequency
Power Meters - RF cont’d.
RF Attenuators
Bird RF Element
Keysight 8494/5B Coaxial Step Attenuator Set 81dB x 1dB
BIR,ELEMENT-LF MY
BIR,ELEMENT-HF MY
KEY,8494/5B MY
RF elements for Bird watt meters. Available in various power and
frequency ranges.
DC to 18 GHz. Comprises a connected set of types 8494B
and 8495B with 11716A rigid interconnect kit. 8494B - 0
to 11db in 1db steps and 8495B - 11 to 81db in 10db steps.
3.5mm connectors.
Marconi 6970 Digital Power Meter
MAR,6970 MY
Keysight 8495D 70dB 26.5GHz Step Attenuator
NiCd battery operated with digital display. Complete with AC
adaptor. Requires sensor. Sensors available for 10MHz to
26.5GHz frequency range.
KEY,8495D MY
Marconi 6910 Power Sensor
Antennas
MAR,6910 MY
Frequency range 10MHz to 20GHz. Power range -30dBm to
20dBm (1μW to 100mW). Max RF i/p 25dBm (300mW) CW
42dBm (15W) peak for 2μs. Sensing element semiconductor
thermocouple. VSWR 1.25: 10MHz to 30MHz, 1.1: 30MHz
to 2GHz, 1.18: 2 to 16GHz, 1.28: 16 to 18GHz, 1.4: typical
18 to 20GHz. Linearity factor provided with sensor.
Accuracy ±0.5% at 25˚C between 10 & 20dBm. Improves by
a factor of 10 for each lower range. Calibration factor provided
with sensor. Accuracy uncertainty provided with sensor.
Resolution 0.01%. RF connector precision N-type (M) 50Ω.
Frequency range DC to 26.5GHz. 70dB step attenuator in 10dB
steps. Max continuous power 1W. 3.5mm connectors.
AH Systems SAS-200/571 Antenna
AH,SAS-200/571 (1840) AU
AH,SAS-571 MY
Double ridge guide horn antenna. Frequency range 700MHz to
18GHz. Continuous power 300W. Impedance 50Ω 200V/m max
radiated field. Type N(f) connector.
Anritsu Dipole Antenna Kit
ANR,ANTENNA (1834) AU
Marconi 6913 Power Sensor
MAR,6913 MY
Frequency range 10MHz to 26.5GHz. Power range 30dBm (1μW) to
20dBm (100mW). Max 25dBm (300mW) CW, 42dBm (15W) peak
for 2μs. Sensing element semiconductor thermocouple. VSWR
1.40: 10MHz to 50MHz, 1.15: 50MHz to 100MHz, 1.10: 100MHz
to 2GHz, 1.15: 2 to 12.4GHz, 1.20: 12.4 to 18GHz, 1.25: 18 to
26.5GHz. Calibration factor provided at 1GHz intervals (500MHz
intervals above 20GHz) with each sensor. Accuracy uncertainty
provided with each sensor. Resolution 0.01%. Linearity factor
accuracy ±0.5% at 100mW, decreasing by 0.005% per 1mW.
Rohde & Schwarz NRT Power Reflection Meter
MP534A dipole antenna 25 to 520MHz and MP651A 470
to 1700MHz.
Directional Yagi Antenna
ANT,DIRECTIONAL YAGI (1829) AU
Various directional Yagi antennas. Frequency rangers from 824 M
(UHF) to 2.17 GHz (UHF).
Omnidirectional Antenna
ANT,OMNIDIRECTIONAL (1826) AU
Various omnidirectional antenna types such as telescopic whip, folded
dipole and monopole. Frequency rangers from 70MHz to 5.4GHz
RS,NRT (2140) AU
Measures directional power forward and reverse under
operational conditions. NRT-Z44 sensor included, range 3 mW to
120 W, 200 MHz to 4 GHz. Measurement method is compatible
with all common analog and in particular digital modulation
standards. GSM/EDGE, 3GPP (W-/TD-CDMA), CDMA (IS-95),
CDMA2000, PHS, NADC, PDC, TETRA, DECT, DAB,
DVB-T and many more.
COM Power Double Ridged Horn Antenna 1 to 18GHz
COM,AH-118 MY
Frequency range 1 to 18GHz, VSWR 2.0:1, Polarization: Linear,
Output Impedance: 50Ω, connector types Antenna output: N (f).
RF Accessories
RF Amplifiers
Keysight 89601B Vector Signal Analysis Software
ENI 604L 4W Wideband 1GHz RF Amplifier
A comprehensive set of software tools for demodulation and vector
signal analysis. Measure and analyse signals in the time, frequency
and modulation domains. Analyse data from over 40 supported
hardware instruments, or use in simulation tools to verify design.
Included license: 200-Basic Vector Signal Analysis, 300-Hardware
Connectivity, AYA-Vector Modulation Analysis and TEDS-Modulation
Analysis. For you with N9030A PXA Signal Analyser.
ENI,604L (2803) AU
Linear wideband RF power amplifier. 4W output at an input of
0.13mW from 0.5 to 1GHz. Saturated output 7W 0dBm input.
Extended performance gives saturated output to a max of 16W
at 10MHz and 12W at 100MHz typically.
Keysight HP8449B Preamplifier 1GHz to 26.5GHz
KEY,89601B MY
KEY,8449B MY
RF Connectors - Various Connector Types
High-gain (+30dB gain), low-noise preamplifier. Frequency range
of 1 to 26.5GHz. Increases sensitivity of any microwave spectrum
analyser for detection and analysis of very low-level signals.
Improved sensitivity can reduce measurement time.
RF Connectors - Various Connector Types. BNC, TNC, VHF,
FME, Mini UHF, N, MMCX, SSMB, MCX, SMB, SMC, SMA series
and 7/16 DIN.
TR,RF-CONN (2816) AU
17
LAN Cable Testers
LAN/WAN Analysers
PDH/SDH Analysers
DSL/POTS Test Set
Fusion Splicers
Fibre Optic Launch Cables & Patch Leads
LAN Cable Testers
Fluke DSX-5000 Cable Analyser 1GHz Class FA
FLU,DSX-5000 (3278) AU/MY
1GHz cable analyser copper test solution enables
testing and certification of twisted pair cabling
for up to 10 GigE deployments and will certify
shielded and unshielded structured cabling
systems from Cat 3, to 7A and Class C, to FA at
Level V accuracy. 9 second Cat 6 autotest. Built in Alien Crosstalk
testing capability. PLA004 (Cat 6A / Class EA), CHA004 (Cat 6A/
Class EA) adapters and LinkWare PC reporting software included.
Cabling
Certification –
Versiv™
Faster systems acceptance
for all copper and fiber
certification jobs.
Fluke CertiFiber Pro MM Optical Loss Test Set
FLU,DSX-MM (3269) AU/MY
Multimode (CFP-MM-ADD) optical loss test set
modules for the Versiv DSX-5000. Provides Tier 1
certification at 850 and 1300 nm in 3 seconds.
A set reference wizard ensures correct reference
setting. Encircled Flux compliant as required
by ANSI/TIA and ISO/IEC. Measures fibre optic
attenuation, length, and propagation delay.
Includes built in VFL and Linkware software.
DSX-5000
CableAnalyzer ™
CertiFiber®
Pro
Kit of Encircled Flux MM Test Reference Leads for the DSX-MM
FLU,DSX-MM EF LEADS (3385) AU/MY
Kit consists of Encircled Flux (EF) compliant test reference
leads for ST 62.5µm (OM1) and SC, LC 50µm (OM3 & 4) fibre
networks. Suitable for the multimode Fluke CertiFiber Pro Optical
Loss Test Sets.
Fluke CertiFiber Pro MM-SM Optical Loss Test Set
FLU,DSX-MMSM (3263) AU
Multi and singlemode (CFP-Q-ADD) optical loss test
set modules for the Versiv DSX-5000. Provides Tier
1 certification at 850, 1300, 1310 and 1550nm
in 3 seconds (for 2 wavelengths). A set reference
wizard ensures correct reference setting. Encircled
Flux compliant as required by ANSI/TIA and ISO/
IEC. Measures fibre optic attenuation, length, and
propagation delay. Includes built in VFL and Linkware software.
OptiFiber ®
Pro OTDR
Fluke CertiFiber Pro SM Optical Loss Test Set
FLU,DSX-SM (3264) AU/MY
Optical loss test set modules for the Versiv
DSX-5000. Provides Tier 1 certification
at 1310 and 1550nm in 3 seconds. A set
reference wizard ensures correct reference
setting. Measures fibre optic attenuation, length, and propagation
delay. Includes built in VFL and Linkware software.
18
Email: [email protected] or
[email protected]
Phone: 02 8850 3333
1800 632 652
LAN Cable Testers cont’d.
LAN/WAN Analysers cont’d.
Fluke DTX1800 Cable Analyser 900MHz Cat 7
Veex MX100E+ 1G Ethernet Test Set
FLU,DTX1800 MY
VEEX,MX100E+ MY
Category 7 cable certification tester up to
900MHz. Tests to Category 3, 4, 5, 5E, 6, 6a
and 7. Cable analyser for use with shielded and
unshielded twisted pair Cat 6 Autotest time of
12 seconds. Linkware PC software, and USB
cable included. Internal memory stores results.
Optional multimode & single mode OTDR module.
VeEX MX100e+ is a full-featured Next Generation
Mobile Backhaul and Carrier Ethernet Tester.
Supports 10/100/1000Base-T on RJ45 port,
100Base-X/1000Base-FX on SFP(1310nm)
port interfaces. Ethernet throughput testing at
Layer 1, Layer 2, Layer 3 and Layer 4 without
VLAN. Performs RFC2544, Multiple Streams,
BER Test and VSAM (ITU-T Y.1564). MultiStream
Throughput Test (Up to 8 independent bandwidth), Advance IP
(PING, Trace Route, Web Test/FTP Test. ReVeal PC Software
Fluke DTX-SFM2 Single Mode Fibre Adaptor for DTX Cable Analyser
FLU,DTX-SFM2 (3265) AU/MY
DTX1200/1800 single mode fibre interface.
Use for testing fibre installations in local
area networks. Fits in the slot on the back of
DTX cable analyser (standard copper cable
adaptors can be connected but not used
simultaneously). Provides fibre testing and
certification. Bi-directional testing at 1310nm
and 1550nm at the same time. Measures
optical power loss, length, and propagation delay for single mode
fibres. Pass/fail results based on common fibre standards.
SC optical connectors. Includes in built visual fault locator. (VFL)
PDH/SDH Analysers
JDSU/Viavi ANT 5 SDH/PDH Access Tester
JDSU,ANT5-STM4 (3445) AU/MY
Field tester for the installation, commissioning
and fault finding of fibre and copper SDH/PDH
networks from 1.5Mb/s to 2.5 Gb/s. Optical
testing at dual wave lengths at STM-1, STM-4,
and STM-16. Electrical testing at DS1/E1/E3/
DS3/E4 and STM-1 interfaces. Full analysis
of concatenated mappings. ATM analysis
for service verification of ATM and 3G/UMTS networks.
LAN/WAN Analysers
JDSU/Viavi ANT 5 SDH/PDH Access Tester
EXFO ETS-1000L 10/100/1000 Ethernet Loopback
EXFO,ETS-1000L MY
Ethernet/Gigabit ethernet loopback unit ETS1000L is intended for performing loopback at
the physical, data link, network and transport
layers of the OSI model. It allows carrying
out loopback control via OAM protocol and
remote control via TELNET protocol.
JDSU,ANT5-STM16 (3446) AU/MY
Field tester for the installation, commissioning and fault finding of
fibre and copper SDH/PDH networks from 1.5Mb/s to 2.5Gb/s.
Optical testing at dual wave lengths at STM-1, STM-4, and
STM-16. Electrical testing at DS1/E1/E3/DS3/E4 and STM-1
interfaces. Full analysis of concatenated mappings. ATM analysis
for service verification of ATM and 3G/UMTS networks.
JDSU/Viavi EDT-135 E1 and Data Tester
EXFO FTB-860G NetBlazer 10G Ethernet Tester
EXF,FTB-860G (3223) AU
Performs 10 Gbps RFC 2544 measurements
and EtherSAM (ITU-T Y.156sam), for turnkey
deployment, validation, and troubleshooting
of access and metro ethernet services. IPv6
testing capabilities BERT, RFC, traffic gen
and through mode. NetBlazer offers GUI
navigation, dedicated quick-action buttons,
and clear notifications for accurate interpretation of test results.
JDSU/Viavi Set of SmartClass 10M-1G Ethernet Testers
JDSU,SMARTCLASS-ETH (3220) AU
Two SmartClass Ethernet(s) provided for
comprehensive installation, turn up and
maintenance of Ethernet IP services up to
1 Gbit. Performs bidirectional RFC 2544,
asymmetric RFC, multiple streams testing,
throughput, latency, frame loss, back-toback frame and jitter. Applications include
performance assessment of Carrier Ethernet
services, activation and maintenance of metro
Ethernet networks, deployment of active Ethernet (point-topoint) access services, traffic generation and QoS verification.
JDSU,EDT-135 (3450) AU/MY
Field service tester for commissioning,
maintenance and troubleshooting of E1
PCM2Mbps and V.11/RS-442, V.24/RS-232,
V.35,V.36/RS-449, EIA-530 data circuits operating
at 50bps to 2Mbps. Provides framed & unframed
monitoring, end-to-end testing, drop & insert,
channel associated signalling; error & alarm analysis, S bit, NFAS &
NMFAS monitoring & generation. Round trip delay measurement,
G.821, G.826 & M.2100 quality of service measurements.
Signal level measurement & primary multiplexer testing.
Fibre optic consumables are available for sale.
Please ask for delivery when placing your rental order.
19
PDH/SDH Analysers cont’d.
Acterna MTS 8000/T-BERD Transport Module
EXFO PPM-350B-EG PON Power Meter
Multirate interface for PDH-DS1/DS3/E1/E3/E4,STS-1 OC3/12/48/48, STM-1e/1/4/16 and interface for OC-192 STM64 with the ability to monitor down to the STS-1 level inside of
any supported optical rate. Used for verifying and qualifying the
performance of SDH and Gigabit ethernet, telecommunications
networks. Electrical and optical interfaces at rates 1310/1550nm).
Also supports the NewGen (ethernet over Sonet/SDH) and able
to perform RFC2544. Ethernet IP testing with 10/100/100Mbps
electrical RJ-45 Interfaces. Supports VLAN, Q-in-Q,VPLS,MPLS
Tunnelling application. Comes with touch screen GUI operation.
Measures optical power and frequency. Floppy drive installed.
OptimiSed for FTTx E & GPON. PPM350B has 10 user-definable
threshold sets, each set consisting of three wavelengths (1310,
1490 and 1550 nm) having their own pass/warning/fail analysis
features. Simultaneous measurement and display of all PON
signals voice, data and video.
JDSU,MTS8000 MY
JDSU/Viavi SmartClass E1/Datacom Tester
JDSU,SMARTCLASS-E1-D (3440) AU
Handheld field tester for the installation and
commissioning of E1 and Datacom services.
Applications include (not limited to), G.703
- 2Mb/s testing, 2 M (Bulk), n x 64kb/s BERT,
audio monitoring (VF drop & insert),ABCD/
Sa monitoring, alarms (defects) and errors
(anomalies) insertion, round-trip delay, DTE/
DTE emulation and monitor mode. Interfaces with X.21,
V.24 (RS-232), V.35, V.36 (RS-449), and EIA-530.
EXFO,PPM350B MY
EXFO PON/FTTx Power Meter & Inspection Probe
EXF,PPM352_FIP400 (3370) AU
Kit includes PPM-352B-EG-ER optimized for FTTx E
& GPON & FIP-400 inspection probe with handheld
display. PPM352 has 10 user-definable threshold
sets, as well as pass/warning/fail analysis features.
Simultaneous measurement and display of all PON
signals voice, data and video.
Fluke FTK1000 Multimode Fibre Optic Light Source & Meter
FLU,FTK1000 (3365) AU/MY
Light source is multimode 850nm and 1300nm.
Power meter has 850/1300nm multimode and
1310/1550nm single mode. Manage results
and print reports via Power meter memory, PC
and supplied software.
VeEx VePal TX130E+ DSn/PDH/Ethernet Analyser
JDSU OLP-55 Optical Power Meter
VEEX,TX-130E+ MY
JDSU,OLP-55 MY
Full-featured Mobile test solution supporting legacy PDH DSn
and Carrier Ethernet technologies. Provides E1 and 1G Ethernet
Testing according to RFC2544 standards.
Optical Power Meter BN 2277/01 Power & Loss Measurement
for installation, maintenance and repair of fiber optics networks.
Display Range: -70 to +20dBm, calibrated wavelengths: 850,
1310, 1550 & 1650nm. Optical connection: FC.
VeEx VePal TX130M+ DSn/PDH/Ethernet Analyser
VEEX,TX-130M+ MY
Full-featured Mobile Backhaul test solution
supporting legacy PDH/DSn, Carrier Ethernet
technologies, and Synchronized Packet networks.
The unit is capable of emulating both Master and
Slave clocks according to ITU-T G.8261 SyncE and
IEEE 1588v2 standards. At the same time able to
provide E1 and 1G Ethernet Testing according to
RFC2544 standards. It has options of Pulse Mask,
E1 Wander and MTIE&TDEV.
VeEx VePal TX130+ E1/Datacom Tester
VEEX,TX-130+ MY
Handheld field tester for installation and commissioning of E1
and Datacom services. It is a small and compact unit.
JDSU/Viavi SmartClass OLP-87 PRO Fiber PON
Power Meter & VIP
JDSU,OLP-87 PRO (3350) AU
TFTTx/PON power meter with P5000i
inspection probe. Used for qualification,
activation, inspection and troubleshooting
of B-PON, E-PON, and G-PON networks.
The FiberChek software and P5000i
probe allow for pass/fail fibre inspection
analysis and reporting. Ideal for endof-line testing, activation, and maintenance of all FTTx/PON
signals. The through-mode capability can simultaneously
measure voice, data, and video signals on fiber at 1490 and
1550nm downstream and 1310nm burst mode upstream.
Supplied with various tip adapters please inquire.
JDSU OLSP-55 Optical Laser Source
DSL/POTS Test Set
JDSU,OLS-55 MY
Operates on dual wavelength of 1310nm and 1550nm.
Output power is from -7 to 0 dBm. Optical Interface: FC-PC.
JDSU/Viavi HST-3000 ADSL2+/VDSL2
JDSU,HST-3000DSL (3470) AU
With Broadcom Bonded module (SIM) for
complete copper testing from POTS to full
spectrum Very High Speed Digital Subscriber Line.
Supports ADSL1, ADSL2, ADSL2+, VDSL2 and
vectored VDSL2. Features include web browser,
advanced IP suite, balance and capacitive
open measurements, load coil detection, DVM,
wideband impairment measurements, spectral analysis, POTS
dialer with caller ID, fault locator and Pulse Echo Tester (PET).
20
Kingfisher KI-28010 Single Mode APC Light Source
and KI-7600 Power Meter
KIN,KI28010-2600 (3361) AU
Singlemode light source KI-28010 and power meter
KI-2600. Compatible with APC and PC singlemode
networks. Wavelengths 1310, 1550 and 1625nm.
Memory with text, timestamp and USB dump, realtime PC reporting software. Autotest provides fast,
easy and automatic multi wavelength loss testing.
TR Calibration
Australia’s Leading Calibration Laboratory
TR Calibration are specialists in the calibration and repair of test and measurement instrumentation
within Australia. With an internationally recognised NATA accreditation to ISO/IEC 17025 on our
calibrations, we will ensure your equipment is operating to the standards you need, when you need it.
Over the last three decades, TR Calibration has calibrated equipment from over
2,400 manufacturers. We are the authorised Service Agents for Barfield Aviation
Ground Support Equipment, Megger Electrical, GEC Aircraft Weighing Platforms,
and Stahlwille Torque products. TR Calibration is also the approved service centre
for GE Measurement & Sensing (Pressure) products, including ADTS.
Benefit from our flexible calibration options
Alongside our in-house calibration, we can come to you and calibrate your
equipment with our NATA and ISO accredited Mobile Calibration Laboratory.
With a number of options available for your instrumentation calibration,
rest assured we can tailor a plan suitable for you and your business.
3 Booking Service
3 HyperCal Service
3 Standard Service
$
3 Complete Test Equipment
Asset Management System
3 Mobile Calibration Laboratory
Ask about our Quality Calibration Price Guarantee
1300 790 480
[email protected]
Fusion Splicers
OTDR & Fibre Inspection cont’d.
Fitel S123M12 Ribbon Fusion Splicer
Anritsu MT9083A Access Master SM and MM OTDR
FIT,S123M12 (3312) AU
ANR,MT9083A SM-MM (3337) AU
Hand-held 12-core ribbon fibre fusion splicer.
Protection sleeve shrink time is 35 seconds,
while splicing requires only 15 seconds for 12
core ribbon fibre allowing up to 160 splicing
cycles (splicing/heating) using the 2 battery
packs installed in the main body. Includes,
S325 cleaver and thermal jacket stripper.
850/1300 nm (29/28dB) and 1310/1550
(39/37.5dB). Singlemode port is SC/APC.
Intelligent analysis software identifies
problem splices, connectors and even
macrobends. Full 1×64 PON support.
Store up to 1,000 traces internally (much
more using USB), drop and drag results to PC.
Fluke Networks FI-1000 FiberInspector Kit
Fitel S178 Fusion Splicer and S325 Cleaver
FIT,S178_S325 (3314) AU
S178 hand-held, core-alignment fusion splicer
and S325 cleaver. Splicer provides typical losses
of 0.02dB and 0.01dB on single and multimode
fibre respectively. 7 second splice time, built in
heater and tension test. Can be operated from
battery or AC source. Precision fibre cleaver can
be used with single & multimode fibres and features a built in
sharps collection bin that automatically stores fibre off-cuts.
Fujikura FSM60R Ribbon Fusion Splicer, Cleaver, Stripper
FUJ,FSM60R-CT30 (3310) AU
12-core ribbon fibre fusion splicer. Splice time
20 sec, sleeve shrink time 40 sec, typically.
Detachable work table and arc-free calibration
system. Includes CT-30 fibre cleaver and thermal
jacket stripper.
Fujikura FSM60S Splicer & CT30 Cleaver
FUJ,FSM60S-CT30 (3320) AU/MY
Typical splice losses of 0.02dB and 0.01dB
on single and multimode fibre respectively.
Features splice protection heater, detachable
work table and arc-free calibration system.
Fujikura FSM70S Core Alignment Fusion Splicer
FUJ,FSM70S (3318) AU/MY
Single fibre core alignment fusion splicer and
CT30A cleaver. Typical splice losses of 0.02dB
and 0.01dB on single and multimode fibre
respectively. Automated tension test, wind
and heater cover, 7 second splice time and
14 second heat time.
FLU,FI-1000-KIT (3338) AU
Enables you to quickly inspect and certify
fibre end-faces inside ports or patch
cords. It’s 2-second automated PASS/FAIL
certification eliminates human subjectivity.
*Requires Versiv mainframe to operate
such as the DSX-5000 (with or without fibre
modules) or Optifiber Pro.
Fluke FI-7000 FibreInspector Pro Video Probe
FLU,FI-7000 MY
A fibre optic inspection scope that allows you
to inspect and certify fibre optic connector
end-faces in 2s. The inspection scope provides
autoated PASS/FAIL certification in the VERSI
main unit. Supplied with LC and SC probe tips.
Fluke Optifiber Pro Multimode OTDR
FLU,OPTIFIBER-PRO-MM (3343) AU
Multimode OTDR, wavelengths 850 and 1300nm.
Designed for testing, troubleshooting and
certifying multimode 50 and 62.5µm fibre optic
networks. Smartphone user interface, shortest
event and attenuation deadzones, LinkWare
download and reporting software included.
Fluke Optifiber Pro Quad OTDR
FLU,OPTIFIBER-PRO Q (3344) AU/MY
Multi and singlemode OTDR, wavelengths 850,
1300, 1310 and 1550nm, dynamic range 28,
30, 32 and 30 dB respectively. Designed for
testing, troubleshooting and certifying multi
and singlemode 62.5, 50 and 9µm fibre optic
networks. Smartphone user interface, shortest
event and attenuation deadzones, LinkWare
download and reporting software included.
JDSU/Viavi Fibre Inspection-Capture Probe
JDSU,FibeR_INSPECT (3340) AU
See also LAN Cable Testers on page 18
Anritsu MT9083B Access Master Singlemode OTDR
ANR,MT9083B SM (3336) AU
Complete testing of PON-based FTTx
networks featuring up to 1x64 splits or
single fibre runs. 1310, 1550 and 1625
wavelengths, dynamic range 40, 39 and
38 respectively. Intelligent analysis software
identifies problem splices, connectors and
even macrobends. 400x Video Inspection Probe (VIP) and 8
tips included. Active fibre verification. Store up to 1,000 traces
in internal memory and up to 30,000 via your USB device.
22
Handheld display, dual magnification (200/400x)
probe and USB adaptor for fibre end-face image
analysis and capture. Includes software and
various probe tips.
JDSU/Viavi MTS-2000 OTDR FibreComplete
JDSU,MTS-2000-FCOMP (3335) AU
Complete with JDSMTS-4136MA-FCOMPSCA OTDR module. Maintain metro and
PON-based FTTx networks. 1310, 1550 and
1625nm wavelengths at 37, 35 and 35 dB
dynamic range (respectively), includes power
meter, NBN auto test sequences and fibre
inspection probe. Performs insertion loss (IL), optical return
loss (ORL) and OTDR from one optical port. Applications include
bidirectional testing, trouble shooting and acceptance testing.
1800 632 652
OTDR & Fibre Inspection cont’d.
Fibre Optic Launch Cables & Patch Leads
JDSU/Viavi MTS-4000 OTDR with E4136FCOMP-MA
Launch Fibre Multimode 50µm 100m
JDSU,MTS-4000-FCOMP (3334) AU
FIB,LAUNCH MM 50UM (3380) AU
Maintain metro and PON-based FTTx networks.
1310, 1550 and 1625nm wavelengths at 42,
40 and 40 dB dynamic range (respectively),
includes power meter, VFL, NBN auto test
sequences and fibre inspection probe.
Performs insertion loss (IL), optical return loss (ORL) and
OTDR from one optical port. Applications include bidirectional
testing, trouble shooting and acceptance testing.
100 metres of 50µm fibre terminated with SC
connectors. A launch fibre enables an OTDR
to measure the loss of the first connector and
adapts a 62.5µm OTDR to a 50µm network.
Launch Fibre Multimode 62.5µm 300m
FIB,LAUNCH MM 62.5UM (3382) AU
SC to SC multimode 62.5µm launch fibre.
JDSU/Viavi P5000i Digital Certifier Video Inspection Kit
JDSU,P5000i (3339) AU
Automated fibre inspection and analysis probe
provides pass/fail capability to PC, laptops,
mobile devices and JDSU test solutions.
Launch Fibre Single Mode 9µm
FIB,LAUNCH SM 9UM (3378) AU
Single mode 9µm SC launch fibre.
Setup and Download
Save time and reduce your costs by using our data management services
Learning to operate unfamiliar equipment costs you time and can lead to fundamental errors
in the data capturing processing. Use a better solution - our Setup and Download service.
Our technical staff can provide you with any downloaded data
for you on a USB drive. These drives usually include PDF files,
raw data files, and the appropriate software – everything you
Fluke DSX-5000 Cable Analyser
need for meaningful analysis.
Once you nominate the appropriate technical information,
we take care of the rest. The downloaded files can be
promptly forwarded to you, or collected at an arranged
time that’s more convenient.
Equipment marked with the
symbol is available to rent
with this service. Fees vary depending on the complexity of
operation and the level of detail involved.
Data management services are available for many
Setup:
• Company name
• Site
• Tester
• Setup of certification test limit
• Cable type/fibre type
Results Downloaded:
• Raw Fluke Linkware files
• Linkware software
• PDF report results
products. To the right is an example of what you can expect.
23
Electrical Power
Electrical Testers
Power Analysers, Loggers & Recorders
Current Clamps Probes & Accessories
Oil, Hipot & VLF Testers above 20kV
Transformer Testers
Current Injectors
Cable & Pipe Tracers and Fault Locators cont’d.
Megger Cable Indentification Kit
MEG,CI-KIT (3600) AU
Provides reliable cable identification for
both energised and non-energised cables.
It can generate pulses on cables 440V
3 phase cables.
Megger EZ-Thump 12kV Thumper & TDR Power Cable Fault Locator
MEG,EZ-THUMP12 (3610) AU
12kV Hipot tester, TDR and Thumper. This unit is
designed as a portable cable fault finder. It operates
off either AC supply or internal batteries. The kit
includes the Megger pinpointer to locate faults when
used in thump mode. Internal battery provide 30mins
of thumping with a 3hr recharge time. Generates
a 500J 0~12kV @12mA pulse for thumping.
Megger TDR2000/2RM Dual Channel TDR Cable Fault Locator
MEG,TDR2000/2RM (3605) AU
Cable & Pipe Tracers and Fault Locators
See also Underground Services Location on page 60
C.Scope DXL2 and SGV2 Cable and Pipe Locator
Time Domain Reflectometer cable fault locator.
User selectable ranges from 0 to 50m up to
20km, minimum resolution 0.1m. Dual cursor
measurement. Internal memory for 15 traces.
Megger “Tracemaster” software supplied. RS232
interface for PC communications. High resolution
LCD display. Battery powered. Dust and shower proof to IP54.
CSC,DXL2-SGV2 (3720) AU
Cable and pipe avoidance and location tool
with depth measurement. Simultaneous dual
33+131kHz frequency will assist in the detection
of smaller buried pipes and cables such as
telecoms, cast iron and street lighting spurs.
4 level power adjust up to 1 watt and depth
detection to 3m (depending on soil type). Four
detection modes; Power, Radio, Generator and Allscan.
Features a Dynamic Swing Sensor to aid in cable and pipe location.
Riser Bond 1205T-OSP Metallic TDR Cable Fault Locator
RB,1205T-OSP MY
Dual input metallic time domain reflectometer cable fault locator
for coaxial cables. Maximum Range: 63,700ft (19,400meters)
at .990 VOP. Distance Accuracy: ±0.1ft (0.03m) plus ±.01% of
reading. Can store, recall and download waveform, via RS232
cable. (Viewable with Software.)
Electrical Testers
Fluke Cable Locator
FLU,2042 (3602) AU
Ideal for tracing cables in walls and
underground, locating fuses/breakers on final
circuits as well as locating interruptions and
short-circuits in cables and electrical floor
heating systems. Can be used for tracing
metallic water and heating pipes. Supplied as
a kit comprising a transmitter and receiver in
a carry case. Voltage measurement range 12
to 400V. Frequency range 0 to 60Hz. Transmitter output signal
125kHz. Transmitter voltage 0 to 400V AC/DC. Depth location
0 to 2.5m. Receiver voltage detection range 0 to 0.4m. The
receiver incorporates a torch for working in dimly lit locations.
See also Current Clamps Probes & Accessories on page 31-32
ABB CB-2000 Portable Capacitance Meter
ABB,CB2000 (3500) AU
Portable (2.4kg) capacitance meter (0-1000µF)
which allows individual capacitors in a capacitor
bank to be measured without disconnection. Battery
powered with an ac adapter. Approximately 8 hours
operating time between charges. Supplied software
and drivers allow measured values to be exchanged to and from a
PC via supplied USB cable. Data stored as tab delimited text files.
Martindale Phase Sequence & Continuity Indicator
100 to 600V, 50/60Hz
MAR,PSCI424-585 (3502) AU
Stay informed on Test and Measurement
news, application notes, and case studies
with @TechRentals on Twitter
24
Check the presence and sequence of the phases
on 3ph circuits. Provides a visual indication of
loss of phase or incorrect sequence. Supplied in
2 forms. Probe style; the connection to the tester
is via 3 insulated cables to 3 fused test probes, 1
with an insulated crocodile clip. Plug style; a 16A, 4 pin (3ph &
earth, BS4343) plug is fitted to the tester. Use as a socket tester
prior to plugging in 3ph equipment.
1800 632 652
Electrical Power
Megger RCDT330 Residual Current Device Tester
MEG,RCDT330 (2618) AU
Tests standard, DC, selection and programmable RCDs. Ramp
testing. Auto (remote) testing. Auto sequence test feature. 3ph safe.
Enables testing on 110V centre tapped supplies. Performs 1/2I,
1xI & 50xI tests on RCDs rated at 10mA, 30mA, 100mA, 300mA,
500mA & 1,000mA on general and selective (time delayed) RCDs.
Weatherproof to IP54. USB interface for test results download.
Megger PAT420 Testing and Tagging System
MEG,PAT420 (2600) AU
Portable appliance tester. Tests to AS3760. Stores
data on USB memory stick. includes a barcode
scanner and label printer.
Metrel IT3017- Installation Tester for Testing to AS/NZS3000
MET,IT3017INSTALTEST (2610) AU
Multifunction installation tester with measurement
functions and Pass/Fail limits set to AS/
NZS3000 Wiring Rules. Capable of storing test
results for printing compliance test reports.
In-built Australian measurements and Pass/
Fail limits, and guarantees accountability and traceability with
storing of test results. Simply conduct the test, press the Memory
button to save the result and assign the result to a location, then
download results to PC software and print-out compliance test
reports with actual test results. Earth Continuity & Resistance,
Insulation Resistance, Polarity, Correct Circuit Connections,
Fault Loop Impedance and RCD Testing. “Auto-Sequence Test”
mode further speeds up compliance testing and reporting.
Seaward Supernova XE3760+ PAT System with Printer and Scanner
SEW,XE3760PKIT+ MY
Includes results label/tag printer and barcode
scanner. Performs all AS/NZS3760: 2001/2003
compliant tests, including class 1 & class 2
leakage current 5mA/1mA, an earth conductor
bond test up to 25A at 3V (approx. 100W) and
250VDC MOV insulation resistance tests. Stores 5,000 tests
in internal memory by appliance ID, including test type, detailed
results, test time & date, next test due date, site & location.
Calibrated resolution better than the required 5% of FS across all
ranges as specified by the Standard. Full QWERTY keyboard, and
bar code reader for input. Durable plastic adhesive test label/
tags printed to attach to appliances and leads includes user ID
(logo optional on request) and test barcode ID, saves transcription.
Compatible with Seaward PATGuard plus software package.
Fluke 1625 KIT GEO Earth Ground Tester
FLU,1625-KIT (2650) AU
Measure total earthing resistance (RA)
with 3 or 4-pole Fall of Potential method,
selective earth resistance measurement
and 4-pole soil resistivity testing (0.001 ohm
to 19.99 k ohm). Stakeless ground loop
measurements (0.001 ohm to 199.9 ohm). Includes automatic
frequency control to minimise interference effects. Battery powered.
Micro-Ohm Meters & Earth Testers cont’d.
Fluke 1630 Earth Ground Clamp
FLU,1630-EARTH CLAMP (2651) AU/MY
Earth ground loop testing and continuity testing
without breaking the circuit. Ground loop resistance
range 0.025Ω to 1.5KΩ. Ground leakage current
measurement range 0.2mA to 1000mA. Current
measurement range 0.2A to 30A. Logs and stores
measurements for on screen recall. LCD display.
Battery powered.
Fluke Clamp for Ground Loop Resistance around Power Pylons
FLU,EI-162BN (2652) AU
Split core transformer designed to work with the
Fluke 1623 and Fluke 1625 earth ground testers
to make selective earth ground loop resistance
measurements on power pylons. Inner diameter
of the clamp is 310mm.
Megger High Accuracy Configurable Diagnostic Earth Tester
MEG,DET2/2 (2653) AU
Provides a wide resistance range from 0.01Ω
to 19.99kΩ for testing larger or more complex
grounding systems and for difficult testing
environments, with ±0.5% accuracy and 0.001Ω
resolution. Microprocessor control and advanced filtering simplify
testing in environments with high levels of interference.
Megger DET4TC Four Pole Soil Resistivity Testing Kit
MEG,DET4TCR2 (2655) AU
IP54 rated, 2, 3 and 4 point testing. Selectable
25V or 50V output, complete with lead and
stake kit. Simple one button operation.
Includes 2x50m and 1x30m test cables.
Stakeless testing. Has the I & V clamps to
enable attached rod testing.
Megger DET4TC2 Digital Earth Tester With Kit
MEG,DET4TC2 MY
Measurement range of 0.010Ω to 200kΩ,
ground noise voltage measurement from 1V
to 100V and ground current from 1mA to 20A.
Accurate results can be obtained in electrically
noisy environments since it is capable of
rejecting noise voltages of 40V peak to peak and
the user can select different test frequencies to
minimise the effect of interference. Powered from 8 AA batteries.
Supplied with ICLAMP. Auguments the traditional fall-of potential
measurement method with ART (Attached Rod Technique) which
allows electrode testing without disconnection and also leakage
current measurements down to 1mA. The VCLAMP enables true
stakeless measurements to be made in situations where driving
stakes is not practical.
Megger DLRO10X Digital Low Resistance Ohm Meter 10A/0.1µΩ-2KΩ
MEG,DLRO10X (2633) AU/MY
Self contained fully automatic (with manual option)
micro-ohm meter, selecting the most suitable test
current up to 10Adc. Range 0.1µΩ to 2kΩ, resolution
0.1µΩ. Internal memory for 700 tests. Download
software supplied. RS232 communications to PC.
LCD display. Rechargeable battery.
25
The
first
ever
The first ever
three-phase
three-phase
SVERKER
SVERKER
■
■
Relay and Substation Test System
for single and three-phase testing
■ A substation engineer’s ultimate tool box
Rugged
reliable
for field usetesting
forand
single
and three-phase
Intuitive
stand-alone operation via
■ Rugged and reliable for field use
instrument touch screen
■ Intuitive stand-alone operation via
instrument touch screen
SVERKER is one of the world’s most
widely used relay testing units since 1976.
SVERKER is one of the world’s most
Contact us for a demonstration.
widely used relay testing units since 1976.
[email protected]
Contact us for a demonstration.
+46-8-510 195 00
[email protected]
The word “Megger” is a registered trademark
+46-8-510 195 00
The word “Megger” is a registered trademark
Offices Sydney - Melbourne - Brisbane - Perth
WWW.MEGGER.COM
■
WWW.MEGGER.COM
SVERKER 900
Relay and Substation Test System
SVERKER 900
A substation engineer’s ultimate tool box
Read more about SVERKER 900:
Megger Pty Limited
Unit 1, 11-21 Underwood Road
Homebush NSW 2104
Tel +61 2 9397 5900
Fax +61 2 9397 5911
Email [email protected]
Web www.megger.com
Read more about SVERKER 900:
1800 632 652
Electrical Power
Micro-Ohm Meters & Earth Testers cont’d.
Power Analysers, Loggers, & Recorders cont’d.
Megger DLRO200 200A Micro-Ohm Meter
CHK GridSense PowerMonic PM30 Plus Power Quality Analyser
MEG,DLRO200 (2664) AU
CHK,PM30PLUS (8706) AU/MY
Test current range 10A to 200A dc.
Measurement range 0.1mΩ to 1Ω, resolution
0.1mΩ. Current cables 2 x 5m. Internal memory
for 300tests. Download software supplied.
RS232 communications to PC. LCD display.
Weatherproof IP65 field unit. Channels: 3 Voltage,
63V to 440V (isolated). 3 current 0 to 3,000A (3ph)
rms. Supplied with 3 flexible 3,000A clamp-on CTs
(flexible CT length 600mm and 190mmØ). In addition,
clamp-on CTs of 3,000A, 1,000A for large conductors
and 500A and 100A for neutral conductor current
measurement are available. Memory: 4Mb. Inbuilt
two line LCD display. Records: V, A, pF, f(Hz), kVA, kVAr,
kW, harmonics, (THD and individual to 48th). Total energy, tariffs,
maximum demands, transient and sub-cycle disturbances. Included
software provides graphs and summaries to PC. Download files
while logging RS-232 interface. A PC using Windows 95, 98, NT4,
WIN2000 or XP O/S, is required with the CHK POWERview software
to configure this unit before operating.
Megger DLRO600 Digital Micro-Ohm Meter - High current
MEG,DLRO600 (2665) AU/MY
Test current range 10A to 600Adc.
Measurement range 0.1µΩ to 1Ω, resolution
0.1µΩ. Current cables 2x5m. Internal memory
for 300 tests. Download software supplied.
RS232 communications to PC. LCD display.
CHK GridSense PowerMonic PM35 Power Quality Analyser
Megger DLRO Wind Turbine Lightning Protection Test Lead Set
MEG,DLRO-100LEAD (2662) AU
For Megger DLRO 10 series digital micro-ohm
meters. Specially designed for measuring resistance
of lightning protection circuit between wind turbine
blade tip and ground. Kelvin clip and hook ends on
100m cable reel. 5m DH2 lead with duplex hand
spikes and hook end.
Megger DLRO Lead Set Current & Voltage Leads
MEG,DLRO-LEADSET (2666) AU
For Megger DLRO digital micro-ohm meters. Potential spike lead
set x2 and current clip lead set x2. Leads are used to separate
the C & P connections. This avoids the erroneously high readings
taken due to a high resistance contact. Current clip lead set 2m
(242041-7) and potential spike set 2m (242021-7).
Megger MOM2 Micro-Ohm Meter
MEG,MOM2 (2638) AU/MY
Lightweight (1 kg), handheld micro-ohm meter.
Up to 220A test current, autoranging from 999
uohm to 1000 mohm FS. Rechargable batteries
provide 2200 measurements for Imin = 50A, or
800 for Imin = 100A. Memory for 190 recorded
measurements, downloadable via Bluetooth
with provided software. Kelvin probes included.
Power Analysers, Loggers & Recorders
See also Current Clamps, Probes, & Accessories on page 31-32
CHK,PM20 MY
Three phase, weatherproof IP65 field unit. Three
voltage channels 63V to 440V (isolated). Four
current channels 0 to 3kA RMS (3ph & neutral).
Supplied with 3 x 1kA clamp-on CTs (cable
capacity 50mm), 3kA for large conductors and
500A for neutrals clamp-on CTs are available.
Memory 4Mb. In-built 2 line LCD display. Records
V, A, pF, f(Hz), kW, kVA, kVAr, THD, total energy
and tariffs, high speed RMS waveform capture events outside
preset limits (10ms intervals). Software provides graphs and
summaries to PC. Download files while logging. RS232 interface.
PC using Win 95, 98 or NT4 O/S, is required with the CHK
POWERview software to configure this unit before operating.
CHK,PM35 MY
Power logger and disturbance analyser. Weatherproof
IP65 field unit. 3 Voltage (55VAC to 520VAC) and
4 current (0 to 3,000A) channels. Supplied with
4 flexible 3,000A clamp-on CTs (flexible CT length
600mm and 190mmØ). Memory: 15Mb. Inbuilt two
line LCD display. Records: V, A, pF, f(Hz), kVA, kVAr,
kW, harmonics, (THD and individual to 48th). Flicker
(Pst & Plt), Total energy, tariffs, maximum demands,
transient and sub-cycle disturbances. Included software provides
graphs and summaries to PC. Downloads files while logging. High
speed USB interface. A PC using Windows 95, 98, NT4, WIN2000
or XP (Vista in compatability mode)O/S, is required with the
software to configure this unit before operating.
CHK,PM40PQA (8708) AU
Weatherproof IP65 field unit. Channels: 3 Voltage,
63 to 440V (isolated). 4 current 0 to 3,000A (3ph
and neutral) RMS. Supplied with 4 flexible 3,000A
clamp-on CTs (flexible CT length 600mm and
Diameter 190mm). Memory: 15Mb. Inbuilt Graphic
128x64 bits LCD display, 7 rows x 20 characters.
Records: V, A, pF, f(Hz), kVA, kVAr, kW, harmonics,
Inter harmonics, voltage and current imbalance
(THD and individual to 48th ) and Flicker. Total energy, tariffs,
maximum demands, and transient and sub-cycle disturbances.
Included software provides graphs and summaries to PC.
Download files while logging USB interface. A PC using Windows
95, 98, NT4, WIN2000 or XP O/S, is required with the CHK
PowerView software to configure this unit before operating.
Fluke 345 Power Quality Clamp Meter
FLU,345 (8739) AU
Ideal for measurements on switching loads such as
variable frequency drives, electronic lighting and UPS
systems. Low-pass filter and high EMC immunity design
make unit ideal for noisy environments. 600V CAT IV rated,
1400A AC, 2000A DC. Measure and log harmonics, inrush
current, ripple current on battery systems. Analyse data
and generate reports with included Power Log software.
Learning to operate unfamiliar equipment
costs you time and can lead to errors.
Read about our Configuration and
Download solution on page 23
27
The Hidden Cost of Power Anomalies and
the Importance of Identifying Harmonics
techrentals
Electrical breakdowns are a leading cause of equipment failure, often involving large income losses and business
interruptions. Many facilities discover this the hard way, left searching for the underlying cause because they were unaware
of an impending breakdown or overload. This expensive trend makes Power Quality Analysis (PQA) of electrical systems
crucial for maintaining reliable and efficient power.
To most, power quality refers to how often the lights go out due to power interruptions. However, due to major technological
advances in consumer electronics, as well as commercial and industrial applications of solid state electronics, our
understanding of power quality has been expanded to include:
Harmonic pollution - Distortions cause extra stress on networks, and negatively impact installation efficiency
Reactive power – Loads up supply systems unnecessarily, and also negatively impacts installation efficiency
Load imbalance – Particularly prevalent in office building applications. Unbalanced loads can lead to excessive voltage
imbalances causing stress on other loads connected to the same network. This can cause an increase of neutral current and
neutral-to-earth voltage build-up
Fast voltage transients – Sags and swells, surges, and reductions that lead to flicker
The above lead to system inefficiency and more seriously, can result in transformers overheating, circuit breakers tripping,
or electronically controlled variable speed motor controllers dropping off-line. Of particular concern is harmonic distortion.
Co
st
Fin
an
cia
l
De
Eq grad
Op uipm ed
era en
tio t
n
Int
Dis ermi
rup tten
tio t
ns
Un
Ov safe
Str erhea
ess tin
ing g/
Sys
tem
Un
Sh expe
utd cte
ow d
ns
Eq
Fa uipm
ilu
res ent
Re
Eq duce
u
Lif ipm d
esp en
an t
Wa
ste
de
ne
rgy
Typical Problems & Potential Consequences
Harmonic
Distortion
Reactive
Power
Load
Imbalance
Fast Voltage
Transients
Much of the equipment we use today (computers, automated process control equipment, variable speed drives, solid state
power conversion equipment) contains circuits that convert alternating current (ac) to direct current (dc). When energised,
these power conversion circuits (themselves very sensitive to power fluctuations and abnormalities) create harmonics that
can severely distort the power supply and cause problems for others connected to the same source.
Original
Waveform
Example 50 Hz
Resulting excessive voltage
that causes stress on loads
Third Harmonic
Example 150 Hz
Harmonically
Distorted
Waveform
Most circuits in Australia are designed to operate at a frequency of 50 Hz. The frequency of a harmonic current or voltage is a
multiple of the original frequency. For example, in a 50 Hz system, the second harmonic would be 100 Hz; the third harmonic
would be 150 Hz and so on. Harmonics add to the fundamental frequency in magnitude and can produce peak voltages
greater than the line voltage. These voltages can become a problem when they exceed the design voltage of electrical devices.
It once was extremely difficult and very time consuming to identify the presence of harmonics in a power system. Most
electrical measuring instruments didn’t have the response time required to detect harmonics. Today, high speed analysers
are available to identify and record the various frequencies present in a power system. Software also helps to simplify the
process of identifying each discrete frequency. These instruments provide an efficient and user-friendly method of identifying
troublesome harmonics. Once identified, a range of solutions can be implemented to reduce or eliminate the effects of
unwanted harmonic frequencies:
• For circuits generating harmonics, filtering circuits can be designed and installed
• For electrical circuits that must carry additional harmonic current, neutral wires with higher current carrying capacities can be installed to minimise overheating and potential fire hazards
• For transformers subjected to harmonic loads, the transformer’s load can be reduced to accommodate the additional harmonic current, a larger transformer can be installed, or a transformer designed to handle harmonic currents
can be specified
Whenever changes are planned in an electrical power system it’s important to investigate the susceptibility of the power
system to harmonic distortion. These investigations should be made in conjunction with any normal power system studies
performed when modifications to an electrical system are anticipated.
Problems with power quality are not, and should not remain, mysteries.
Although issues are not always easy to identify, and sometimes require
intensive investigation, doing so can ensure optimal reliability and
efficiency for your electrical supply.
Contact TechRentals today to enquire about our PQA inventory, and
discuss how you can best identify harmonics, voltage swings, flicker,
power outages and surges in your power system. Also available, our
range of power demand analysers suitable for energy auditing.
1800 632 652
[email protected]
Hioki PW3198 Power Quality Analyser
Electrical Power
Fluke 435 3-Phase Power Quality & Energy Analyser
Hioki 3169-21 Clamp-On Power Logger with 4 x 5,000A FlexCTs
FLU,435 (8738) AU/MY
HIO,3169-21CLAMPONPT (8728) AU
Power Quality Analyser to suit a broad range of
AC mains studies. Includes 4 x 600/6000A AC
CTs. A unique energy loss calculator provides
the ability to monetarily quantify energy losses.
Supplied with Fluke Power Log Software for
detailed data analysis and report generation.
Optional accessory: FLU,I5SPQ3 (3 x i5s 5A AC current clamps).
Measures voltage, current, power,
power factor, harmonics and
integrated values. Simultaneously
performs demand measurements
required for power management and
energy saving. Range 5A to 5000A.
Includes 4 x flexible CTs, 500/5000A switchable. Supplied
software provides graphs and summaries to PC. Flash card data
storage. RS232 interface for PC communications.
Fluke 1735 3-Phase Power Logger
FLU,1735 (8737) AU/MY
Measures single-phase to 3-phase 4-wire
circuits, 50/60Hz. 3 voltage inputs with
common neutral rated 600Vac (CAT III 600V).
4 current inputs, 4 flexible current probes
(15A to 3000A) are included. Records voltage,
current, power (P, Q & S), power factor, frequency, energy
consumption, averaged demand, harmonics (odd up to 25th
order), THD (voltage & current). Includes built-in batteries for up
to 12 hours of recording, and includes Fluke Power Log software.
Hioki 3196 Power Quality Analyser with 4 x 5,000A Flex CTs
HIO,3196-PQA MY
High speed field unit, measuring transient and
sub-cycle disturbances, total energy, tariffs
and max demand. Voltage (150~600V RMS),
and 4 current (0 to 5kA), channels. Includes 4
x flexible CTs, 500/5000A switchable. Records
V, A, pF, f(Hz), kVA, kVAr, kW, harmonics, and
flicker. Memory 512MB flash card. Colour display.
Supplied software provides graphs and summaries to PC.
RS232 or LAN interface for PC communications.
Fluke VR1710 Single-Phase Voltage Quality Recorder
FLU,VR1710 (8720) AU
Single phase power quality analyser. Records
RMS, transients, flicker & harmonics up to
the 32nd. Selectable logging periods from
1s to 20min. Provides continuous recording
with no gaps. Includes software for download,
analysis and automatic reporting.
Hioki 3169-21 Clamp-On Power Logger with 4 x 500A CTs
HIO,3169-21 CT500AMP (8726) AU
Measures voltage, current, power, power
factor, harmonics and integrated values.
Simultaneously performs demand
measurements required for power
management and energy-saving. Range
0.05A to 500A. Includes 4 x clamp-on CTs.
Supplied software provides graphs and summaries to PC. Flash
card data storage. RS232 interface for PC communications.
Hioki 3169-21 Clamp-On Power HiTester with 4 x 1,000A CTs
HIO,3169-21CT1000AMP (8727) AU
Measures voltage, current, power, power
factor, harmonics and integrated values.
Simultaneously performs demand
measurements required for power
management and energy-saving. Range
5A to 1000A. Includes 4 x clamp-on CTs.
Supplied software provides graphs and summaries to PC.
Flash card data storage. RS232 interface for PC communications.
New items are being added to the inventory
constantly, so if you can’t see what you’re
looking for, please call us on 1800 632 652.
30
Hioki 3196 Power Quality Analyser with 4 x 1,000A CTs
HIO,3196PQA-CT1000A (8730) AU
High speed field unit, measuring transient
and sub-cycle disturbances, total energy,
tariffs and max demand. Four voltage
(150~600V RMS), and 4 current (0 to 1kA),
channels. Supplied with 4 clamp-on CTs.
Memory 512MB flash card. Colour display.
Records V, A, pF, f(Hz), kVA, kVAr, kW,
harmonics, and flicker. Supplied software provides graphs and
summaries to PC. RS232 or LAN interface for PC communications.
Hioki PW3198 Power Quality Analyser including 3 x 1,000A,
1 x 200A AC/DC & 4 x 5,000A Flex CTs
HIO,3198 (8732) AU/MY
Premium Power Quality Analyser for
demanding applications. Includes
3 x 1,000A AC CTs, 1 x 200A AC/DC
CT and 4 x 9667 5,000A flexible CTs.
Ideal for AC mains studies as well as
solar inverter evaluations. Supplied with Hioki 9624 PQA-HiVIEW
Software for detailed data analysis and report generation.
Hioki PW3360-21 Clamp On Power Logger with
Harmonic Measurement
HIO,PW3360-21 (8735) AU
HIO,3360-21 MY
Power logger, supports single to three
phase 4 wire circuits. Supplied with
3x500A CTs 5/10/50/100/500A
ranges 0.3% rdg+0.01%fs and
3x5000A Flexible CTs 50/500/5000A
ranges 2%rdg+0.3%fs. Has a built in
battery and can also be powered by
the line voltage. Provides harmonic measurement upto the 40th
harmonic. Has plug in SD card. Is recongnized and a diskdrive
when connected to a computer. Includes analysis software.
1800 632 652
Electrical Power
Current Clamps, Probes, & Accessories
Current Clamps, Probes, & Accessories cont’d.
See also Electrical Testers on page 24
See also Power Analysers & Recorders on page 27
Fluke 90I-610S 1A to 600A AC/DC Current Probe
FLU,90I-610S MY
Compatible with any Fluke scopemeter test tool,
power harmonics analyser, oscilloscope, multimeter
or other voltage measurement device that has the
following feactures: BNC input connectors or if using
a meter a BNC to banana plug adaptor PM9081/001
(included) lets you use this probe with your DMM.
CHK CR100 Clamp-on CT
CHK,CR100 MY
Jaws 43mmØ inside. Use with CHK,PM20
or PM30 for use as fourth CT to measure
neutral current. Accuracy Class 1.
Fluke i5sPQ3 AC Current Clamps, 5A (3 x i5S per set)
Dranetz TR2510 Current Clamp Probe 0 to 10A RMS
FLU,I5SPQ3 (8790) AU/MY
DRA-BMI,TR2510 (8766) AU
A pack of 3 pieces of the i5s 5A AC current clamps,
specially configured to provide low current accuracy while
taking measurements on secondary current transformers.
CAT III 600 V (For insulated conductors only). Suits the
Fluke 435 and other instruments with BNC inputs.
Set of 4 current clamp/probes, range 0 to 10A
RMS. Max conductor size 12mmØ. Suitable
for power quality analysers DRA-BMI,PG4400,
DRA-BMI,PX5 and DRA-BMI,PX5-400. For current
measurement through CT current transformer.
CT ratio can be selected on the above mentioned models.
Hioki 3285 AC/DC Clamp-on Meter with Analog Output
HIO,3285 (8781) AU
Ranges 200A/2kA AC/DC. Measure volts, ranges 30V,
300V & 600V AC/DC. Frequency ranges 10Hz, 100Hz
& 1kHz. Display LCD, counts max 2,500 current, 3,750
voltage and 1,250 frequency. Output voltage 1V for
2,000 count fs for each current range, can select Rec
RMS output, response time about 250ms rise time,
fall about 500ms. Waveform output. 1V is produced for
1,000 count on full scale frequency range. Output not available
for voltage measurements. Supplied with signal output cord,
4mm to BNC convertor, carry case and AC adaptor. Powered with
internal 9V battery or AC adaptor. (AC adaptor not supplied).
Fluke 376 True-rms AC/DC Clamp Meter with iFlex
FLU,376 (8770) AU/MY
1,000A AC and DC current measurement with
fixed jaw. 2500A AC current measurement with
the 45cm iFlex flexible current probe. 1000V AC
and DC voltage measurement. Voltage and current
measurements are true rms. Includes ability to
measure frequency, resistance and capacitance.
Rated CAT IV 600V and CAT III 1000V.
QUALITY PRODUCTS
QUALITY RESULTS
Hioki
PW3198 Power Quality Analyser
Baur
PD SGS Handheld PD Detector
Load Profiling
Event Monitoring
Harmonics Analysis
00V
Cat IV 6
s
Clas A
Test Online
TEU & Acoustic Sensors
MV & HV Switchgear
Analyse MPPT Tracking
1000V, 15 kW
Fast Transient Response
Ponovo
4 x 300V, 3 x 20A
61850 Option
Comprehensive Software
L336i Protective Relay Tester
Chroma
62050H-600S
Power Parameters Pty Ltd
83 Northern Road, Heidelberg West, Vic 3081
www.parameters.com.au [email protected]
Freecall: 1800 623 350 Freefax: 1800 067 263
Electrical Power
Current Clamps, Probes, & Accessories cont’d.
Insulation Testers & Meggers to 20kV cont’d.
Hioki 3290 Clamp-On AC/DC HiTester
Fluke 1587 Insulation Multimeter
HIO,3290 MY
FLU,1587 MY
Current Measurement at DC and from 1Hz
AC to 1,000Hz. Current Clamp Hioki 9693
Clamp-on AC/DC sensor ranges: 20A, 200A
& 2,000A, jaw opening 55mm.
Insulation: measurement range: 0.01M to 2GΩ.
Test Voltages: 50V, 100V, 250V, 500V, 1,000V
Multimeter: Voltage 1mV to 1,000VAC/DC,
current 0.01mA to 400mA AC/DC, resistance
0.1Ω to 50.0MΩ, capacitance 1nF to 9999μF,
frequency 0.01Hz to 99.99kHz.
Hioki 9660 Clamp-on 100A AC CT
HIO,9660CT100A (8783) AU
Rated primary current 100A AC. Amplitude accuracy: ±0.5% rdg. ±0.2%FS (at 45 to 66Hz).
66Hz-5kHz ±1% or less. Max circuit voltage
300V RMS/insulated wire. Core jaw: 15mmØ.
Size: 46w x 21d x 135hmm, cord length 3m.
Hioki 9661 CCT-500A Clamp-On Sensors 500A, 500mVAC Output
HIO,9661 CCT-500A (8784) AU
500A rated, 500mVAC FS output, core
jaw 46mmØ. Designed with a safety
barrier to protect the user from being
in direct contact with live conductors
and completely meets all CE marking
requirements. Basic specifications: Rated
input current 500A AC, rated output current 0.5VAC, accuracy
(at 45 to 66Hz), amplitude: ±0.5% rdg ±0.2% FS is the 3196
range value, phase: ±0.5° or less, frequency characteristics
66Hz to 5kHz (±1% or less from accuracy), max allowable
input continuous 550A RMS (45 to 66Hz), max circuit voltage
600VAC RMS (insulated wire), core jaw Ø46mm, dimensions,
mass 77mm W x 151mm H x 42mm D, 360g, cord length 3m.
Hioki 9661-01 CCT-500A Clamp-on Sensors
HIO,9661-01 CCT-500A (8785) AU
500A rated, 500mVAC FS output, jaw
46mmØ. Rated input current 500A
AC, rated output 0.5VAC, accuracy (at
45 to 66Hz). Amplitude ±0.5%rdg,
±0.2%FS. FS is the 3196 range
value, phase ±0.5° or less, frequency
characteristics 66Hz to 5 kHz (±1%), max. Allowable input
continuous 550A RMS (45 to 66Hz), max circuit voltage
600VAC RMS (insulated wire). Dimensions 77mm W x 151mm
H x 42mm D, cord 3m. Suitable for Hioki models: 3196PQA,
3197PQA, 3169-20CLAMPONPT, 2331-20RPMS, 8715-01,
any data logger/scope which takes up to 1.7mVAC input.
Hioki 9694 Clamp-on CT 5A (Set of 4)
Fluke 1653 Electrical Installation Tester
FLU,1653 MY
Tester verifies the safety of electrical
installations, according to IEC 60364, HD
384 standards. Functions available: voltage and frequency
measurement, insulation resistance testing, continuity testing,
loop impedance, RCD tripping time, RCD tripping current, earth
resistance and phase sequence.
Hioki 3455 High Voltage Insulation Tester
HIO,3455HVIT-5kV MY
PI (Polarisation Index) and DAR (Dielectric
Absorption Ratio) function to check
insulation quality and step voltage test
to detect for signs of deterioration.
Generates test voltages from 250V to
5kV in commonly used presets of 250V,
500V, 1kV, 2.5kV & 5kV, or set to desired
level by increments or decrements of 25V
or 100V. Insulation diagnoses for automatic calculation and
indication of PI and DAR, step voltage testing and temperature
correction. Large memory stores up to 100 manual records and
a logging function for 10 data (360 times). Stored data with
date and time may be displayed on the LCD or down-loaded.
Kikusui TOS-5101 10kV AC/DC Hipot Tester
KIK,TOS-5101 (8430) AU
Hipot testing up to 10kV in either DC
or AC. Digital voltmeter and ammeter,
digital timer. Window comparator for more
reliable pass/fail judgement. Automatic
discharge of device under test in DC test mode. Equipped
with Key Lock and Interlock functions for greater safety.
Megger MIT525 5KV DC Insulation Resistance Tester
HIO,9694CT5A (8789) AU
MEG,MIT525 (8426) AU/MY
Rated primary current 5A AC. Amplitude
accuracy ±0.5% rdg. ±0.2% FS (at 45 to 66Hz),
66Hz to 5kHz ±1% or less. Max circuit voltage
300V RMS/insulated wire. Core jaw 15mmØ.
Size mm: 46w × 21d × 135h, cord length 3m.
Measures to 20TΩ at 5kV. Tests include PI, DAR,
DD, SV and ramp test. Li-ion battery with rapid
charge, mains operation possible while battery is
charging. Advanced memory with date/time stamp.
Noise filter rejects up to 3mA noise. PowerDB Lite
asset management software supplied with unit for
download of test data to a PC.
EA Technologies UltraTev Plus Partial Discharge Detector
EAT,ULTRATEVPLUS (8410) AU
Multi-function Partial Discharge (PD) Instrument. It
measures accurate PD activity using the UltraTEV
detector and an ultrasonic detector. It gives you
an objective measure of the level of activity. Will
display PD severity level. The kit includes the
Ultradish for measurement of overhead assets.
32
Megger MIT1020 Diagnostic 10kV Insulation
Resistance Tester
MEG,MIT1020-10KV DIT (8423) AU
Backlit display, variable test voltage from 50V to 10,000V,
Automatic IR, PI, DAR, SV and DD tests, measures to
35T, RS232 and USB download of results. IEEE 43-2000
recommends the use of 10kV for motor windings rated above
12kV. Protection rating of IP54. Mains or battery powered.
1800 632 652
Electrical Power
Insulation Testers & Meggers to 20kV cont’d.
Oil, Hipot, & VLF Testers above 20kV cont’d.
Megger MIT1025 10kV DC Insulation Resistance Tester
High Voltage Inc PFT503, 50kV AC Test Set
MEG,MIT1025 (8427) AU
HIV,PFT503 (8453) AU
10kV DC Insulation Resistance Tester.
Measures to 20 TΩ at 10kV. Tests include
PI, DAR, DD, SV and ramp test. Li-ion battery
with rapid charge, mains operation possible
while battery is charging. Advanced memory
with date/time stamp. Noise filter rejects
up to 3mA noise. PowerDB Lite asset management software
supplied with unit for download of test data to a PC.
Single, portable (34kg) unit suited for
testing overhead apparatus, vacuum bottles
and interrupters, switch gear, bus duct,
motorized vacuum switches, reclosers,
bushings, fuses and arrestors, linemans
safety products, small transformers, electrical
components and motors. This 3kVA model
features capacitive load compensation enabling full load
testing with a power draw of 1.5kVA while operating from a
conventional line input. 60mA output current capability.
Megger MIT1525 15 kV DC Insulation Resistance Tester
MEG,MIT1525 (8428) AU
Measures to 30TΩ at 15kV. Tests include PI, DAR,
DD, SV and ramp test. Li-ion battery with rapid
charge, mains operation possible while battery is
charging. Advanced memory with date/time stamp.
Noise filter rejects up to 6mA noise. PowerDB Lite
asset management software supplied with unit for
download of test data to a PC.
Megger S1-1052 High Current Insulation Resistance Tester 10kV
MEG,S1-1052 10KV-DIT (8424) AU/MY
High output current 5mA for fast charging of
capacitive loads. Testing up to 10kV, mains or
battery powered, digital/analogue backlit
display, variable test voltage from 50V to
10,000V, automatic IR, PI, DAR, SV and DD tests.
Measures to 35TΩ. RS232 and USB download of results.
Megger S1-552 High Current Insulation Resistance Tester 5kV
MEG,S1-552 5KVDIT (8425) AU
High output current 5mA for fast charging of
capacitive loads. Testing up to 5kV, mains
or battery powered, digital/analogue backlit
display, variable test voltage from 50 to 5,000V,
automatic IR, PI, DAR, SV and DD tests.
Measures to 15TΩ. RS232 and USB download of results.
High Voltage Inc PFT-1003CMF 100kV AC Hipot Test Set
HIV,PFT1003 (8456) AU
Portable (16kg control unit, 39kg HV tank)
hipot tester, 100kV, 50Hz, rated 3kVA into
capacitive loads. Features continuously
adjustable output voltage, external safety
interlock, zero start safety interlock, self
resetting over current protection, guard/
ground return mode, HV on/off and main
power push button ruggedized meters and
with glass windows that eliminate static buildup.
HV Diagnostics HVA TD60 Portable TanDelta Measurement System
HVD,HVA TD60 (8460) AU
Optional Accessory for HVD,HVA60-DC/VLF and
HVD,HVA90_DC-VLF. Tan Delta or Power Factor
tester used to determine the power factor of cables,
transformers, capacitors, rotating machines and
other switchgear. This test allows the detection
of insulation defects before they fail in service.
HV Diagnostics HVA30 30kV-15mA DC/VLF High Voltage
Insulation Dielectrics Test Set
HVD,HVA30-DC/VLF (8461) AU/MY
Oil, Hipot, & VLF Testers above 20kV
Hipotronics 880PL-10MA-B 80kV DC Hipot Tester
HIP,880PL (8491) AU
Compact, portable unit (41kg) for DC field
testing of cables, terminations, motors,
generators and other electrical apparatus.
80kV 10mA output capability with multirange
voltmeter and ammeter. For operator safety
the power supply and test object are automatically grounded
when high voltage is turned off, and there is no exposed high
voltage. Guard circuit for accurate leakage current measurement.
Includes overload relay and surge limiting resistors in HV output.
VLF and DC test capabilities combined in one
unit (20kg). Suitable for testing cables (XLPE,
PE, EPR, PILC etc), capacitors, switchgear,
transformers, machines (IEEE 433), insulators
and bushings. VLF (0.1Hz to 0.02Hz), DC (±),
cable fault conditioning (burning) and sheath/
jacket testing modes all included. Fully automatic
or manual cable test sequences complying with International
Standards/Guides such as IEEE 400.2, VDE 0276 and CENELEC.
True symmetrical sinusoidal, load independent, output waveform
across the full load range. Real-time display of actual output
wave form. Easy to use, ergonomic, menu guided, large backlit
user interface. Large output load capability (up to 5uF).
Automatic and integrated load capacitance measurement
with optimum frequency selection. Storage of test results
for later retrieval or download to a PC/Laptop.
High Voltage Inc PFT301 30kV AC HiPot Tester
HIV,PFT301CM (8452) AU
Portable HiPot 0~30kVac 1kVA resistive/
capacitive load: 33mA. Duty cycle at
1kVA 1h on 1h off 700VA continuous.
Tests the integrity of items including
insulating materials, isophase bus duct,
switchgear, transformers, vacuum bottles &
interrupters, vacuum switches, automatic
circuit reclosers, bushings, fuses, arrestors, circuit breakers,
transformers, capacitors, motor and generator windings.
Watch how-to videos on any piece
of equipment displaying this symbol.
33
Electrical Power
Oil, Hipot, & VLF Testers above 20kV cont’d.
Transformer Testers cont’d.
HV Diagnostics HVA60 60kV VLF/DC Test Set
Megger IDAX 300 Insulation Diagnostic Analyser
HVD,HVA60-DC/VLF (8462) AU
MEG,IDAX300 (8552) AU
VLF and DC test capabilities combined in
one unit (60kg). Suitable for testing cables,
capacitors, switchgear, transformers, machines,
insulators and bushings. VLF (0.1Hz to 0.02Hz),
DC (±), cable fault conditioning (burning) and
sheath/jacket testing modes all included.
Fully automatic or manual cable test sequences.
True symmetrical sinusoidal, load independent,
output waveform across the full load range. Real-time display
of actual output wave form. Large output load capability (up to
5µF). Automatic and integrated load capacitance measurement
with optimum frequency selection. Storage of test results for later
retrieval or download to a PC/Laptop. For a more comprehensive
understanding of insulation condition perform tan delta testing
at the same time with optional accessory HVD,HVA TD60.
Provides an accurate and reliable condition
assessment of insulation in transformers,
bushings, generators and cables.
It utilises Dielectric Frequency Response
in combination with analysis in software to determine the percent
of moisture in paper insulation, oil conductivity and an individually
corrected tan delta value at 20°C reference temperature.
HV Diagnostics HVA90 90kV VLF/DC Test Set
HVD,HVA90_DC-VLF (8463) AU
VLF and DC test capabilities combined in one
unit (127 kg). Suitable for testing cables (XLPE,
PE, EPR, PILC etc), capacitors, switchgear,
transformers, machines (IEEE 433), insulators
and bushings. VLF (0.1Hz to 0.01Hz), DC
(±), cable fault conditioning (burning) and
sheath/jacket testing modes all included. Fully automatic or
manual cable test sequences complying with International
Standards/Guides such as IEEE 400.2, VDE 0276, CENELEC
HD620 S1, NEN 3620, SANS 10198 and IEC 60060-3. True
symmetrical sinusoidal, load independent, output waveform
across the full load range. Real-time display of actual output wave
form. Easy to use, ergonomic, menu guided, large backlit user
interface. Large output load capability (up to 10uF). Automatic
and integrated load capacitance measurement with optimum
frequency selection. Storage of test results for later retrieval or
download to a PC/Laptop. Optional Accessories: HVD,HVA TD60.
Megger OTS80PB Transformer Oil Tester
MEG,OTS80PB (8450) AU/MY
Test voltage 80kV max at 61.8Hz. Fully
automatic operation. Rechargeable batteries.
RS232C interface.
Megger MTO330 Automated Six Winding Transformer Ohmmeter
MEG,MTO330 (8553) AU
Delivers full eight-terminal/six-winding
resistance measurement capability. Designed
to save time by testing all six windings without
having to disconnect and reconnect leads.
Also, the simultaneous winding magnetization
method gives fast and reliable measurements
even on large transformers with delta configuration on the low
voltage side. The MTO330 leads are interchangeable with the
Megger TTR320 three-phase turns ratio instrument which eliminates
additional connecting time for turns ratio measurements (However,
TTR320 leads must NOT be used with the MTO330. The MTO330
leads have a higher current rating). Includes an on-board computer
with QWERTY keyboard, USB and ethernet.
Megger TTR320 3-Phase Transformer Turns Ratio Test Set
MEG,TTR320-47 (8554) AU
Accurately measures ratio, phase
deviation and exciting current on 3-phase
transformers in the presence of high noise.
Can test phase-PowerDB. Test results can
be stored and downloaded at a later time.
Handles ratios up to 45,000:1 with 0.3% accuracy, 0.1% up to
2,000:1. Compatible with the Megger MTO330 transformer
ohmmeter leads which eliminates additional connecting time for
turns ratio measurements (However, TTR320 leads must NOT be
used with the MTO330. The MTO330 leads have a higher current
rating). Includes an on-board computer with QWERTY keyboard,
RS232 and ethernet.
Omicron CT Analyser Current Transformer Analyser
Phenix BK130 130kVAC Hipot Aerial Lift Test Set
PHE,BK130 (8480) AU
Tests elevating boom as well as the work platform
and linings to ANSI A92.2 draft standard. Can also
be used in many other Hipot applications that require
the sort of voltage and current this instrument is
capable of. Can supply 0 to 130kVAC @ 50mA and
0 to 35kVAC at 171mA. The whole system is built
into a trolley cart for ease of use. Measurement
accuracy 1% FS for 10 to 100% of range.
OMI,CTANALYZER (8555) AU
Portable (8 kg) and automated unit for testing
protection and metering CTs on-site. CTs can
be verified up to the 0.1 accuracy class. The
included CT SB2 switchbox allows automated
testing of CTs with up to six taps. Remanence can
be measured and cores can be demagnetised.
Omicron FRA Frequency Response Analyser
OMI,FRA (8556) AU
Transformer Testers
Megger CAL 300 IDAX Calibration Box
MEG,CAL300 (8551) AU
Exclusively used for calibration of Megger
IDAX Insulation Diagnostic Analysers.
34
Uses swept frequency response analysis to
detect mechanical and electrical changes
of the core and winding assembly of power
transformers. By finding winding or core
defects after faults, mechanical shocks
or transportation, it offers a valuable
opportunity to improve the reliability of transformers, to reduce
maintenance costs and to avoid expensive, unexpected outages.
Laptop included, preloaded with the FRAnalyzer software.
1800 632 652
Electrical Power
Transformer Testers cont’d.
Current Injectors cont’d.
Omicron Dirana Transformer Insulation Moisture Analyser
Multi-Amp MS-2 High Current Test Set
OMI,DIRANA (8557) AU
MUL,MS-2 (4600) AU
Provides an accurate and reliable condition
assessment of insulation in transformers,
bushings, generators and cables.
It utilises Dielectric Frequency Response in
combination with analysis in software to determine the percent
of moisture in paper insulation, oil conductivity and an individually
corrected tan delta value at 20°C reference temperature.
The unit is provided with a laptop pre-loaded with all software.
Designed to test overload relays, circuit
breakers and earth fault trip devices.
Input 240V 50/60Hz. Output continuously
adjustable in 4 ranges 120V/5A, 24V/25A,
6V/120A & 3V/240A. Short term over
current of several times the rated current ranges is possible.
Digital current meter has read and hold facilities for short
duration currents. Digital timer measures elapsed time between
energisation and the test device operating.
Ponovo CT/PT Analyser
PON,PCT200I (8559) AU
Accurately tests all types of instrument
transformers using low-frequency and
variable-frequency methods. Short testing
times combined with Windows PC ensure
that analysis and reporting for multiple transformers is a simple
and efficient task for HV engineers. Other features include: test
M/P/TP types, as well as bushings and GIS styles; ratio check
30,000:1 to 45,000:5 (±0.1%); knee point check up to 30 kV;
test in accordance with IEC60044-1/6 and ANS/IEEE C57.13.
This instrument also supports IEC61850 protocols.
ISA CBA1000 Circuit Breaker Analyser
ISA,CBA1000 (4657) AU
116 timing channels (6 main contacts, 6
Resistive contacts, 4 aux contacts) , up
to 3 trip/ 1 close coils, motion and speed
analyser (single analogue transducer
input), suitable for EHV, HV and MV circuit
breakers, standalone no PC required for operation, Analysis
and results directly on display. Accuracy 100µs c0.025%.
Megger TM1760 Circuit Breaker Analyser System
MEG,TM1760 (4670) AU
Advanced Circuit Breaker Analyzer with built-in
PC and utilising DualGround method for safer
testing. Galvanically isolated inputs and outputs
makes it possible to perform all relevant
measurements in one test, eliminating the need
for new setup and re-connections. Includes 3 static & dynamic
resistance modules with up to 220A test current, a 3-channel
dynamic capacitance module and a full set of required cables.
Current Injectors
Megger CSU600AT Current Supply Unit with Timer Option
MEG,CSU600AT (4602) AU/MY
600A current supply unit, including timer option.
Current supply, 100A @ 9.0V 1hr, 600A @ 6.5V 30s.
Megger INGVAR Primary Current Injection Test System
MEG,INGVAR MY
Advanced primary current injection test system
to simplify all types of switchgear and CT
commissioning, ground grid, circuit breaker
testing and more. Up to 5,000A output current.
Two units, each of about 20kg, making it easier
to carry. (Supplied current cable supports up to 2,000A only).
Omicron CPC 100 Multi-functional Primary Test System
OMI,CPC100PTS (4620) AU
Portable (29 kg) primary test system suited
for testing of current transformers, voltage
transformers, power transformers, power lines,
HV cables, grounding systems, switchgear and
circuit breakers, protection relays and more.
Tests to 800A (extended to 2000A with CP CB2) over frequency
range 15Hz to 400Hz, or to 400A DC. Laptop included, preloaded
with CPC 100 Toolset. Optional accessories: OMI,CPCU1 (with or
without OMI,CPSTEP) OMI,CPSB1 OMI,CP-TD1 OMI,CPCB2.
Omicron CP CB2 Current Booster
OMI,CPCB2 (4605) AU
Combined with the CPC 100, the CP CB2 boosts the
output current of a CPC 100 from 800A to 2000A.
Omicron CP CU1 Multi-Purpose Coupling Unit for PC 100
OMI,CPCU1 (4623) AU
Combined with the CPC 100, the CP CU1 is a
measurement system for line impedances &
k-factors of overhead lines or power cables,
mutual coupling of parallel lines, ground impedances of large
substations and coupling of power lines into signal cables. This
test system overcomes the problem of power system frequency
interference that has previously made it necessary to use extremely
large, high-power equipment to carry out these measurements.
OMICRON Step & Touch Voltage Accessory Set
OMI,CPSTEP (4624) AU
Combined with the CPC 100 and CP CU1, this
kit is a measurement system for Step & Touch
voltages. The battery powered FFT Voltmeter
(CP AL1) operates with short leads and requires
no connections back to the CPC 100.
Omicron CPSB1 Switch Box
OMI,CPSB1 (4621) AU
Switch Box to allow fully automated 3 phase
transformer testing, accessory for the CPC100.
Omicron CP TD1 Capacitance and Tan Delta Add-on
OMI,CP-TD1 (4622) AU
Combined with the CPC 100, the CP TD1 measures
the capacitance and dissipation factor (power factor)
with laboratory precision. This allows the insulation
condition of transformers, generators and other parts
of high-voltage systems to be tested according to IEEE
62 (C57.152), IEC 60076-1 and -3, as well as the
CIGRE “Guide for Transformer Maintenance”. As recommended
in the CIGRE Guide, testing is performed at variable frequencies
to better diagnose signs of ageing in insulation. The portable test
system (max. 29 kg per component) can also generate output
voltages of up to 12kV. Trolley included.
35
Electrical Power
Current Injectors cont’d.
Protection Relay Testing Systems cont’d.
T&R CIT/LU2000 Primary Current Injection Test Set
Omicron CMC 356 Advanced Protection Relay Test Set +61850
T&R,CIT (4603) AU
OMI,CMC356_61850 (4657) AU
Comprises control unit and 2kA loading unit (LU).
Control unit includes timer, current and voltage
meters, and variable output transformer. External
loading unit output 0 to 2kA, duty 5min on 15min
off at 6VAC, continuous 0 to 1kA at 3VAC. Two
units weight 35 & 45kg plus 2 quad 70mm2 cable sets each 3m
long. Control unit connects to LU with supplied interface cable.
Protection relay test set with 6 current
sources (6 x 32A/430VA, 3 x 64A/860VA or
1 x 128A/1000VA), 4 voltage outputs (4 x
300V or 1 x 600V), 4 x binary outputs, 10 x
multifunctional binary inputs (dry/wet) and Generator Combination
Cable for wiring convenience. The 6 current and 4 voltage output
channels are continuously and independently adjustable in
amplitude, phase and frequency. All outputs overload and shortcircuit proof. Includes IEC61850 software package (GOOSE,
Sampled Values, IEDScout, SVScout). ELT-1 and LLO-2 options not
included. Laptop included, preloaded with Test Universe software
(Advanced Protection + Transducer) and IEC61850 package. Optional
accessories: OMI,CMA156-6PCA OMI,C-PROBE1 OMI,CMGPS
Omicron CMC256-6 Universal Relay Test Set
OMI,CMC256-6 MY
Protection relay test set and universal calibrator (energy meters,
measuring transducers, power quality measurement devices,
phasor measurement units etc) with six current sources (6 x 12.5A,
3 x 25A or 1 x 75A), four voltage outputs (4 x 300V or 1 x 600V),
4 x binary outputs, 10 x multifunctional binary inputs (dry/wet)
and Generator Combination Cable for wiring convenience. The six
current and four voltage output channels are continuously and
independently adjustable in amplitude, phase and frequency.
All outputs overload and short-circuit proof. LLO-2 option not
(Universal). Optional accessories: OMI,CMA156-6PCA OMI,CMGPS.
Omicron CMC 256plus Universal Relay Test Set
OMI,CMC256PLUS (4661) AU
Improved accuracy specifications. Protection
relay test set and universal calibrator (energy
meters of class 0.2, measuring transducers,
power quality measurement devices, phasor
measurement units) with 6 current sources (6 x 12.5A, 3 x
25A or 1 x 75A), 4 voltage outputs (4 x 300V or 1 x 600V), 4
x binary outputs, 10 x multifunctional binary inputs (dry/wet)
and Generator Combination Cable for wiring convenience. The
6 current and 4 voltage output channels are continuously and
independently adjustable in amplitude, phase and frequency.
All outputs overload and short-circuit proof. LLO-2 option not
(Universal). Optional accessories: OMI,CMA156-6PCA
Omicron CMC 356 Advanced Protection Relay Test Set
OMI,CMC356 (4656) AU
Protection relay test set with 6 current
sources (6 x 32A/430VA, 3 x 64A/860VA
or 1 x 128A/1000VA), 4 voltage outputs (4
x 300V or 1 x 600V), 4 x binary outputs, 10 x multifunctional
binary inputs (dry/wet) and Generator Combination Cable for
wiring convenience. The 6 current and 4 voltage output channels
are continuously and independently adjustable in amplitude,
phase and frequency. All outputs overload and short-circuit
proof. Laptop included, preloaded with Test Universe software
(Advanced Protection + Transducer). Optional accessories:
OMI,CMA156-6PCA OMI,C-PROBE1 OMI,CMGPS
Omicron CMGPS Syncronisation Control Unit
OMI,CMGPS (4662) AU
Optional accessory for use with any OMICRON CMC test
set. Included are two GPS unit which provide a start
signal pulse based on the GPS clock time base. Software
is integrated in the testing modules (State Sequencer).
Can also be used as a stand-alone application.
36
Ponovo Secondary Relay Tester
PON,L336I (4650) AU
Light weight secondary relay tester. 6x15A
±1mA AC current sources, 4x150V AC ±2mV
voltage sources, 8 binary inputs & 4 binary outputs. PC software
with a library of testes for nearly every relay available on the market.
Megger (Programma) Sverker760 Relay Test Set
PRO,SVERKER760 (4672) AU
Relay test set for 1ph protective relay equipment. Three phase
relays can be tested 1 phase at a time or by synchronising more
than one unit. Current ranges to 100A with full load current
to 250A. AC outputs to 250V & DC outputs to 300V. In-built
capacitor and resistors for current output phase shifting. In-built
timer, ammeter, and voltmeter. Measures phase angle, PF, and
impedance. RS232 communications and control interface.
Megger (Programma) Sverker780 Relay Test Set
MEG,SVERKER780 MY
Relay test set for 1ph protective relay equipment.
Three phase relays can be tested 1ph at a time
or by synchronising more than one unit. Can test
voltage relays with a frequency range from 15Hz
up to 550Hz. Current ranges to 100A with full
load current to 250A. Volage source up to 250VAC and 300VDC.
Inbuilt capacitor and resistors for current output phase shifting
(360°). Inbuilt timer, ammeter, and voltmeter. Measures phase
angle, PF, and impedance.
Megger Sverker 900E Relay Testing System
MEG,SVERKER900E (4674) AU
Relay test set for 3ph protective relay equipment.
Current ranges to 105A. AC outputs to 900V
and DC outputs to 900V. Power factor and
phase shifting measurements. 4x Voltage,
4x Current generators with 4 binary inputs,
2 binary outputs, and timing measurement.
Built in computer controller for setting up and sequencing tests.
T&R DVS3-HP Static Relay Test System
T&R,DVS3-HP (4675) AU
Test system for testing voltage and frequency protection relays
and transducers. Tests Automatic Voltage Regulating (AVR) relays
with line drop compensation, under and over voltage relays,
directional over-current relays, df/dt (ROCOF) relays, vector surge
(step change of phase) relays and check synchronising relay.
Generates a 3ph voltage output from a 1ph supply, and may
be used in conjunction with a current source to test directional
protection. Requires 1ph 50/60Hz supply of 115V or 230V
(±15%). We only supply the DVS-T260 VT box (Ratio 1:2) which
has a maximum output voltage of 266V for a maximum load of
10VA per phase. Accuracy, Class 2 (±0.2% for 2.5 to 10VA load).
1800 632 652
Electrical Power
Dimmer Dot 0-270V AC, 17A Variac
DIM,D201P (8230) AU
Single phase variac. 240 V AC input, 0-270V AC
output at 17A. Input and output connections must
be wired up under a protective cover.
Dimmer Dot Variable AC Voltage Auto Transformer 3 Phase 23-28A
VAR,D-283-OB (8229) AU
Manual operated air cooled; Input 400/415V, 50Hz. Output 0 to
415/470V. 23 to 28A. Total Weight 95kgs.
Hioki 3554 Battery HiTester
Follow us!
Have greater access to news, product tips, and
information via a range of social media channels.
With over 100 videos on our YouTube channel and
regular industry related updates on Twitter, LinkedIn,
and Google+ you will always be informed.
So subscribe and follow to stay up-to-date and
in-touch with our friendly team and make the most
of your test and measurement equipment.
Visit our Youtube Channel
Watch our
Electrical Power
playlist
HIO,3554 (8270) AU/MY
Takes on-the-spot measurements of the
internal resistance, voltage and temperature
of lead-acid batteries, principally for UPS
and similar applications, without needing
to shut off the battery. Instantaneous results, on a three-rank
scale of Pass, Warning, or Fail, using a composite decision
based on the internal resistance and the voltage. Resolution
of 1µΩ, necessary for high capacity batteries (of at least
500Ah). Includes Hioki 9460 clip type temperature leads.
Megger (Programma) TORKEL 840 Battery Load Unit
Watch our
General Industrial
playlist
Watch our
Construction
playlist
PRO,TORKEL-840 (8276) AU
Portable (22 kg, 38 kg with accessories and transport case)
battery discharge load unit. Works with 12V to 250V battery
systems and can discharge at up to 110A (15kW maximum
power). Can be programmed for constant current, constant
power, constant resistance or user defined load profiles. The
included DC current clamp allows on-load testing. Tests can be
PC controlled and results reviewed using the included TORKEL
Win software. The load current can be extended with the optional
accessory PRO,TXL870 extra load unit.
www.youtube.com/techrentals
Megger (Programma) TORKEL 860 Battery Load Unit
PRO,TORKEL-860 (8278) AU
Portable (22kg, 38kg with accessories and
transport case) battery discharge load unit.
Works with 12V to 480V battery systems and can
discharge at up to 110A (15kW maximum power).
Can be programmed for constant current, constant
power, constant resistance or user defined load
profiles. The included DC current clamp allows on-load
testing. Tests can be PC controlled and results reviewed using
the included TORKEL Win software. The load current can be
extended with the optional accessory PRO,TXL870.
www.twitter.com/techrentals
www.linkedin.com/company/techrentals
Megger (Programma) TXL870 Extra Load Unit
PRO,TXL870 (8277) AU
Optional accessory for the PRO,TORKEL-840
battery load unit. Adds up to an extra 112A
load capacity to a discharge test (15.8kW
maximum). Operates as a slave in combination
with a PRO,TORKEL-840 battery load unit.
www.google.com/+techrentals
37
General Industrial
Endoscopes Borescopes Visual Inspection
Wet & Dry Block & Calibrators
Data Loggers
Fluke 52-2 Digital Thermometer
FLU,52-2 MY
Dual input thermocouple thermometer supplied
with two K type thermocouples for differential
measurements. Sampling rate of 1Hz (1 probe) or
1.7Hz (2 probes). Will continuously record max and
min measurements. It also can take K,J,T and E type
Thermocouple inputs. Temperature range: K type:
-200°C to 1,372°C.
Fluke 54-2B 2 Channel Data Logging Temperature Meter
with FlukeView
FLU,54-2B-FVF (4507) AU/MY
Dual input digital thermometer with data logging. Will
take most TC inputs. Accuracy ±0.05% of reading
+0.3ºC. 500 point logging with date & time stamp. Also
records min, max or avg. Logged data can be reviewed
on meter or downloaded to PC using software included.
Supplied with 2 x 1m K type thermocouple leads
-200 to 800°C.
Fluke 572-2 High Temperature Infrared Thermometer
FLU,572-2 MY
Temperature measurement range from -30 to 900ºC
with USB interface. 60:1 distance to spot ratio
with dual laser sighting for fast, accurate targeting.
Adjustable emissivity and predefined emissivity table.
Accuracy of ±1ºC for reading from 0 to 950ºC, display
resolution 0.1ºC. Stores 99 data points, data output
via USB cable, comes with software for viewing and reporting.
MORE DETAIL & MORE CHOICES
for Faster Troubleshooting and Reporting
Experience the Power of FLIR Thermal Imaging
From the pocket portable C2 to the well-connected
E60 and the incredibly ergonomic T-Series, all
FLIR handheld infrared cameras come standard
with our patented MSX® technology. MSX adds
key visible details to your images without diluting
their thermal integrity so you see numbers, labels,
and perspective that help instantly identify where
potential problems are heating up.
FLIR E-Series and T-Series cameras also feature the
speed of built-in wireless communication. Transmit
readings from compatible FLIR METERLiNK® test
instruments and embed extra measurement data
into thermal images automatically. Connect cameras
via Wi-Fi to smartphones and tablets with FLIR Tools
Mobile for fast image sharing and decision making.
Perfect for electrical/mechanical inspections,
HVAC applications, building diagnostics, and more,
FLIR cameras set the benchmark in affordable,
feature-rich thermal imaging.
FLIR Systems Pty Ltd.
VIC: 03 9550 2800 NSW: 02 8853 7870 WA: 08 6263 4438
Tel AU: 1300 729 987 NZ: 0800 785 492 Email: [email protected]
www.flir.com.au/techrental
38
FLIR MSX® Embosses Thermal images with Visible Detail
*See warranty and registration details at flir.com
ISO No. FLIR20850 Disclaimer: Images for illustrative purposes only.
Specifications subject to change without notice.
1800 632 652
General Industrial
Temperature Meters/IR Thermometers cont’d.
Infrared Thermal Imaging Cameras cont’d.
Fluke 1523 NATA Precision Handheld Thermometer
Flir E60 MK-II Infrared Thermal Image Camera
FLU,1523-NATA (4514) AU
FLI,E60-II (4549) AU/MY
Precision, portable, electronic thermometer with
trending and 25 memory positions for NATA-traceable
calibration and high accuracy. Includes 5616 probe
298mm x 6.35mm 100Ω platinum resistance
thermometer probe (PRT) -200 to 420°C, stability
±10mK, accuracy ±0.012°C at -200°C, ±0.011°C
at 0°C, ±0.028°C at 420°C.
-20 to 650˚C, IR and MSX resolution 320 x 240, 60Hz. NETD 50
mK. 2 and 4x digital zoom. Visual image 3.1mpix,
built in LED lamps, laser locator, scalable IR picture
in picture. Video recording, touch screen, composite
video out, Wi-Fi, and USB. Infrared camera applications
include electrical distribution, mechanical (belts, rollers,
couplings, gaskets/seals, compressors etc), product
development, HVAC/R, automotive. Bluetooth support
for voice annotations and selected Extech equipment.
PC software provided. Mobile app available.
Testo 845 IR Thermometer with Humidity Probe and T/C Probe
TES,845 (4527) MY
Temperature measurement -35 to 950°C. Relative humidity
probe 0 to 100%RH. Fast-action surface probe with
sprung thermocouple strip, also for uneven surfaces.
Switchable optical resolution: far field: 75:1 (16mm
at a distance of 1200mm). Close focus: 1mm at a
distance of 70mm. Adjustable emissivity from 0.1 to
1, max, min, displayed on backlit LCD. Continuous
measure mode. Data output software and cable
included. Accuracy ±0.75% of reading 100 to 950°C.
Display resolution 0.1°C.
Flir E8 Infrared Thermal Image Camera
FLI,E8 (4547) AU
-20 to 250˚C, IR and MSX resolution 320 x 240,
9Hz, NETD <60 mK. Infrared camera applications
include electrical distribution, mechanical (belts,
rollers, couplings, gaskets/seals, compressors etc),
product development, HVAC/R, automotive. PC
report writing software provided.
Flir E60 Infrared Thermal Image Camera
FLI,E60 (4550) MY
-20°C to 650˚C, IR resolution 320 x 240,
60Hz, visual image 3mpix, built in LED lamps,
laser locator, scalable picture in picture. Video
recording, touch screen, composite video out,
Wi-Fi, and USB. Infrared camera applications
include electrical distribution, mechanical (belts,
rollers, couplings, gaskets/seals, compressors
etc), product development, HVAC/R, automotive.
Bluetooth support for voice annotations and selected Extech
equipment. PC software provided. Mobile app available.
Flir T390 Infrared Thermal Image Camera
FLI,T390 (4556) AU
Infrared thermal imaging camera. -20°C to
1,200°C. MPEG 4 video recording and composite
out, is suitable for almost any application such
as electrical surveys, building diagnostics and
mechanical inspections. With a 3.5 inch touch
screen, Fusion functionality, auto and manual focus, target
illuminator, laser locator and voice text annotation. 50Hz refresh
rate, IR Resolution 320 x 240, visible light camera 3.1 MP.
TR Calibration
Your Expert for Instrument Calibration, Repair, and Sales
As one of Australia’s leading calibration laboratories, TR Calibration has the
expertise and support to offer a range of sales options for our customers.
Our primary sales capabilities include:
3 Approved distributor of GE Air Data Test Set (ADTS) equipment
3 Sales of GEC Aircraft and Truck Weighing Platforms
3 A selection of electronic and electrical equipment
3 A broad range of metrology instruments
Whether it be an evaluation or an application specific recommendation,
TR Calibration has the experience and industry scope to provide detailed
information prior to an equipment purchase.
To discuss your unique requirements, or to learn more about our sales capacity,
please call 1300 790 480 or email us at [email protected]
39
General Industrial
Fluke TiS55 Infrared Camera
FLU,TIS55 (4565) AU/MY
Fluke TiS55 thermal imaging camera.
Temperature range -20 to 450°C, resolution
220 x 165, 9Hz refresh, NETD 80mK. IRFusion technology, manual focus, sighting
laser and internal 4GB memory as well as SD card. Infrared
camera applications include electrical distribution, mechanical
(belts, rollers, couplings, gaskets/seals, compressors etc),
product development, HVAC/R, automotive.
Fluke Ti25 Infrared Thermal Image Camera
FLU,TI25 MY
Temperature range -20 to 350°C, accuracy
+/-2°C or 2% (whichever is greater).
Manual focus. SD memory card (2GB
memory card will store at least 1200 fully
radiometric (.is2) IR and linked visual images
each with 60s voice annotations or 3,000
basic (.bmp) IR images). Infrared camera export file formats
JPEG, BMP, GIF, P, TIFF, WMF, EXIF, and EMF. IP54 rating.
FLU,TI125 (4566) AU
Temperature range -20 to 350°C, resolution 160
x 120, 9Hz refresh. Video recording up to 5 mins,
video USB streaming, electronic compass, voice
annotation, laser pointer and torch. Auto focus for
distances greater than 1.2m, manual focus for shorter
distances. Accuracy +/-2°C or 2%, NETD 100 mK.
40
FLU,TI32 MY
20 to 600°C, resolution 320x240. Infrared camera
applications include inside and outside electrical
distribution, motors, pumps, generators, mechanical
(belts, rollers, couplings, gaskets/seals, compressors
etc). Process industry tanks/vessels, pipes, valves,
traps, reactors, and process insulation, HVAC/R.
FLU,TI32_WIDE-ANGLE MY
Field swappable, wide angle thermal lens allows
the user to have a wider field of view for working in
tight spaces, small rooms, etc. Field-of-View (FOV)
is 46°x 34°. For use with the Ti32 and TiR32.
Endoscopes, Borescopes & Visual Inspection
See also Pipeline & Cavity Inspection on page 62
Fibrescope MTFS15-1000 1.5mm x 1m Endoscope
FIB,MTFS15-1000 (5184) AU
Working length 1,000mm x 1.5mmØ. Includes light source.
Operating temperature -20 to 60ºC at atmospheric pressure.
1800 632 652
General Industrial
Endoscopes, Borescopes & Visual Inspection cont’d.
Olympus Series C Videoscope, 2m
OLY,SERIES C (5180) AU
6.2mm insertion tube with 8 brightness
settings, glare reduction and all direction
120deg articulation. Will capture images
in JPEG format or MPEG-4 video which
can be stored to a SDHC card or the unit can be connected
directly via a USB cable to a PC, also has HDMI output.
Applications include turbine inspection, heat exchangers,
gearboxes in automotive or electrical power generation,
chemical, oil and gas vessel inspection. Recording available
per 1GB: about 6,500 images or about 55 minutes video.
Olympus IPLEX UL 3.5m Handheld Videoscope
OLY,IPLEX-UL (5182) AU
IPLEX UltraLite 3.5m, 6mm diameter handheld
videoscope. With an integrated control unit
and LCD monitor for one handed operation.
Intuitive icons for menu control, 120°
articulation (up,down,right,left), still image and video recording
capabilities (approx. JPEG 300 KB and MPEG-4 600 KB/s),
compliant to IP55 and insertion tube operable underwater
to 3.5m (excluding stereo tip adapters not included).
Endoscopes, Borescopes & Visual Inspection cont’d.
RF Systems VJ-ADV Articulating 3.9mm Video Borescope
RFS,VJ-ADV (5195) AU
Video borescope is 3.9mm in diameter and
1.5 meters long with a flexible stainless steel
braided insertion tube with adjustable brightness
and 90 degree 4 way articulation. Images and
video can be captured and saved to a micro SD
card. Applications include turbine inspection,
heat exchangers, gearboxes in automotive or electrical power
generation, chemical, oil and gas vessel inspection.
Olympus High Speed Camera
OLY,ISPEEDLT (5217) AU
High speed video camera including stand and
lighting accessories. 800 x 600 color resolution
at 1,000fps. Maximum frame rate 2,000fps.
2.24 sec recording time color camera. 4 x lens kit
supplied. Maximum shutter speed 5µs.
Hioki 3404 Optical/Contact Tachometer
HIO,3404 MY
Olympus IPLEX RT 7.5m Portable Industrial Videoscope
OLY,IPLEX-RT 7.5 (5186) AU
Battery powered videoscope. 7.5 meter
insertion tube, 6mm diameter, 4 way,
100°articulation and 120° FOV. Applications
include inspection of heat exchangers,
turbines, gearboxes, automotive parts and
aircraft. Still and video recording to USB
flash, approx 3,400 images and 30 mins per 1GB.
Olympus IPLEX-LT 7.5 Portable Industrial Videoscope
OLY,IPLEX-LT 7.5 (5188) AU/MY
Battery powered videoscope. 7.5 meter
insertion tube, 6mm diameter. 4 way,
120° articulation. Applications include
inspection of heat exchangers, turbines,
gearboxes, automotive parts and aircraft. Still and video recording
to USB flash, approx 3,400 images and 30 mins per 1GB.
Olympus IPLEX LT 3.5m Portable Industrial Videoscope
OLY,IPLEX-LT 3.5 (5190) AU
Lightweight, 2.7kg out of transit case.
8.5mm diameter, 3.5m length tungsten
insertion tube. 4 way, 140° articulation.
Still and movie recording to USB flash.
IP55 compliant. Applications include inspection of, heat
exchangers, turbines, gearboxes, automotive parts and aircraft.
Olympus IPLEX- MX II Portable Industrial Videoscope
OLY,IPLEX-MXII (5192) AU
Battery powered industrial vidoscope,
lightweight, just 2.5kg out of transit
case. 6mm diameter, 3m length
tungsten insertion tube, articulation
4 way UP/DOWN/LEFT/RIGHT 120
degree. Field of view 120 degre,
depth of field 18 to 1000mm, illumination method LED.
Brightness adjustment and digital zoom, built in 6.5 inch
TFT colour display, record JPEG images to USB flash device.
RCA composite video output. Battery or AC powered.
Autoranging 4 digit display. Ranges in RPM mode
30 to 99.9, 1,000 to 9,999 & 1,000 to 9,999
x 10. Ranges in RPS mode 0.5 to 99.99, 100
to 999.9 & 1,000 to 1,600. Analogue output
1mV/10RPM or 1mV/100RPM, accuracy 4%.
Tripod mounting. Internal battery or external AC operation.
Contact adaptor included with cone and peripheral ring.
Monarch PLT200-KIT Digital Contact/Non Contact Tacho
MON,PLT200-KIT (5214) AU
Hand held digital contact/non-contact tacho kit.
Ranges optical/non-contact 5 to 200,000 RPM,
contact 0.5 to 20,000 RPM. Display 5 digits,
5 alpha numeric LCD. Non contact operating
range 90cm, tripod mounting. Direct contact
tips and contact wheel supplied. Programmable
for IPM, FT/M, YPM, cm/M, m/M, RPM, RPS,
RPH and Totaliser up to 200,000. Output TTL pulse.
Easy-Laser D525 Shaft Alignment System
EAS,D525 (4944) AU
Includes 14 programs for all types of rotating
machines. 13 programs for geometric applications.
‘EasyTurn’ function. Thermal Growth Compensation.
Fixturlaser Dirigo Laser Bases Shaft Alignment System
FIX,DIRIGO MY
Measurement resolution to 0.01mm Shaft diameter
range 40 to 150mm using an extension chain 150 to
500mm. Maximum distance between measurement
units 0.85m. Very simple to use and operate as shims
are applied the alignment can be monitored in real
time. 20h of operation from alkaline batteries.
Fixturlaser PAT Pulley Alignment System
FIX,PAT (4941) AU
Laser based alignment system for pulley systems.
Measurement accuracy 0.5mm (0.2º). 20hrs of
operation on AAA batteries. Mechanically self
centres on pulley, will operate successfully even
on worn pulley systems.
41
General Industrial
Laser Rotational Shaft Alignment cont’d.
Industrial Process Calibrators cont’d.
Pruftechnik Rotalign Ultra Laser Shaft Alignment
Crystal nVision Pressure Calibrator 30 Bar IS NATA
PRU,ROT-ULTRA (4945) AU
Laser based rotating shaft alignment system.
Maximum separation between emitter and
receiver 10m. Aligns horizontal and vertical
machines, aligns coupled and uncoupled shafts
equally well. Ultra modern computer design, backlit colour display,
Intel XScale 400MHz CPU, USB for peripheral devices, PC, printer,
also Bluetooth communication. Backlit keyboard, rechargeable
Li-Ion battery pack. Machine train alignment - 14 machines.
Alignment results in 3 quick steps, thermal growth computation.
Rotalign Ultra Reader software included.
Pruftechnik 1500mm Length Tension Chains
PRU,AL12.116 (4946) AU
1500mm length tension chains for PRU,ROT-ULTRA.
Beamex MC5 Multifunction Calibrator NATA Certified
BEA,MC5 (4731) AU
NATA certified MC5 provides calibration capability
for pressure, temperature, electrical and frequency
signals. HART communication and CMX light
software provided. Calibration results can be
stored or printed. Performs as a field-entry
device (FED) allowing for the recording of noncalibration related maintenance results. Pressure
modules included, -1 to 20 bar and 600 bar. DC voltage & current,
frequency, and pulse measurement. RTD, thermocouple, and
resistance simulation & measurement. Pressure accuracy EXT-600
bar 0.007% FS +0.01% Rdg, INT-20 bar 0.005% FS +0.01% Rdg,
temperature coefficient ±0.001 % Rdg/°C outside 15 to 35°degC.
CRY,NVISION-30-NATA (4757) AU
Intrinsically safe pressure calibrator. Displays realtime recorded data graphically on a high res screen
with ability to zoom into specific events. 500,000
data point memory records all data from all enabled
screens from two modules simultaneously. Fastest
logging interval 10 readings/sec. Configured
with MA20 current, voltage and switch test module and 30 bar
pressure module, accuracy to 0.025% of reading. Includes hand
pump and CPF (finger tight to 700 bar) fittings.
Crystal XP2i 1 Bar (15 psi) NATA with Druck PV411 Hand Pump
CRY,XP2I CAL KIT 1 (4735) AU
Range -1 to 1 bar (15 psi) Nata certified
pressure gauge with hand pump. Accuracy,
±0.1% of reading between 20 to 100% of
full scale, ±0.02% of full scale between 0 to
20% of full scale. Generation 3 gauges have
32,000 point logging capacity at intervals
from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing
logging for 1 year and PSV/PRV (Pressure Safety/Pressure
Relief Value) mode increasing measurement rate to approx.
8x per second. Gen 2 gauges have 6,000 points and logging
intervals from 1 second to 18 hours. Logs actual pressure,
average pressure, average pressure with peaks and, on demand.
Intrinsic and safety ratings registered under IECEx, ATEX and DNV
standards.Intrinsic and safety ratings registered under IECEx,
ATEX and DNV standards.
Crystal XP2i 7 Bar (100 psi) NATA with Druck PV411 Hand Pump
Beamex MC5-IS Multifunction Calibrator NATA Certified
BEA,MC5-IS (4732) AU/MY
NATA certified MC5-IS provides calibration
capability for pressure, temperature, electrical
and frequency signals. HART communication and
CMX light software provided. Calibration results
can be stored or printed. Performs as a FieldEntry Device (FED) allowing for the recording
of non-calibration related maintenance results.
Pressure measurement range, -1 to 20bar and
600bar (up to 1,000bar with optional external transducers).
DC voltage and current, frequency, and pulse measurement.
RTD, thermocouple, and resistance simulation and
measurement. Pressure accuracy EXT-600 bar 0.007% FS
+0.01% Rdg, INT-20 bar 0.005% FS +0.01% Rdg, temperature
coefficient ±0.001 % Rdg/°C outside 15 to 35°C.
pressure gauge with hand pump.
Accuracy, ±0.1% of reading between
20 to 100% of full scale, ±0.02% of full
scale between 0 to 20% of full scale.
Generation 3 gauges have 32,000 point
logging capacity at intervals from 1 second to 18 hours, ULP
(Ultra Low Power) setting allowing logging for 1 year and PSV/
PRV (Pressure Safety/Pressure Relief Value) mode increasing
measurement rate to approx. 8x per second. Gen 2 gauges
have 6,000 points and logging intervals from 1 second to
18 hours. Logs actual pressure, average pressure, average
pressure with peaks and, on demand. Intrinsic and safety
ratings registered under IECEx, ATEX and DNV standards.
Beamex MC6 Multifunction Calibrator NATA Certified
Crystal XP2i 345 Bar (5,000 psi) NATA with Druck PV411 Hand Pump
BEA,MC6 (4727) AU
NATA certified MC6 provides calibration
capability for pressure, temperature,
electrical and frequency signals. HART
communication and CMX light software
provided. Calibration results can be stored
or printed. Performs as a field-entry device
(FED) allowing for the recording of noncalibration related maintenance results. Pressure modules
included, -1 to 20bar and 600bar (up to 1,000bar with optional
external transducers). DC voltage & current, frequency, and pulse
measurement. RTD, thermocouple, and resistance simulation &
measurement. Colour touch screen. Pressure accuracy EXT-600
bar 0.007% FS + 0.01% Rdg, INT-20 bar 0.005% FS + 0.01% Rdg,
temperature coefficient ±0.001 % Rdg/°C outside 15 to 35°C.
Range -1 to 345 bar (5,000 psi) Nata
certified pressure gauge with hand pump.
Accuracy, ±0.1% of reading between 20
to 100% of full scale, ±0.02% of full scale
between 0 to 20% of full scale. Generation 3
gauges have 32,000 point logging capacity
at intervals from 1 second to 18 hours, ULP
(Ultra Low Power) setting allowing logging
for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value)
mode increasing measurement rate to approx. 8x per second.
Gen 2 gauges have 6,000 points and logging intervals from 1
second to 18 hours. Logs actual pressure, average pressure,
average pressure with peaks and, on demand. Intrinsic and
safety ratings registered under IECEx, ATEX and DNV standards.
42
TechRentals’ Managed Solutions
To ensure your peace of mind, TechRentals draws upon its 40 years of experience
to take the guess work out of your instrumentation needs. By working with you we
will deliver your business a seamless solution.
techrentals
3 Product research
3 Immediate replacement of faulty equipment
• Eliminate wasted hours trying to find the right
equipment. Let our industry experts recommend a solution. Just provide the details of your requirements and we do the rest.
• We aim to have any faulty equipment replaced in a time critical manner so on-site disruptions are minimised.
3 Access new technologies and avoid obsolescence
3 Configuration
• Keep up-to-date with industry requirements and the latest technology with easy upgrade paths.
• Fundamental errors in configuring the equipment can be eradicated. Our qualified technicians will configure the equipment to your requirements prior to shipping.
• Avoid the potential cost of owning equipment that can be quickly superseded or no longer suited to your business requirements.
3 Equipment training including data collection
3 Account and financial flexibility
• Training that ensures your staff are confident and familiar with their new equipment.
• No Capex account process required.
• Cost allocation to specific projects.
• We can instruct your staff on how to extract equipment results, saving your staff time.
• Allows for easy budgeting with simple fixed
monthly invoicing.
• Free up your Capital Expenditure budget for other business critical purchases
3 Ongoing technical support
• You have priority access to a highly trained team of technical experts experience and knowledge in the operation of the equipment.
• Tax allowances on Managed Service payments can be 100% tax deductable and recovered far more quickly than for ongoing asset depreciation.#
3 Annual calibration
Now, more than ever, businesses like yours need to be
more productive with fewer resources. Let TechRentals
help make your test and measurement equipment
requirements work smarter, all the while saving you
time and money to focus on your core business.
• TechRentals will liaise with your staff well in advance to minimise any downtime by pre-booking the equipment calibration at an agreed time. If replacement equipment is available then there will be no downtime experienced at all.
#Please ensure you obtain independent professional taxation advice.
1800 632 652
Melbourne
•
Sydney
[email protected]
•
Newcastle
•
Brisbane
•
To w n s v i l l e
•
Adelaide
•
Darwin
•
P e r t43
h
General Industrial
Crystal XP2i 690 Bar (10,000 psi) NATA with PV411 Hand Pump
Range -1 to 690 bar (10,000 psi) Nata
certified pressure gauge with hand pump.
Accuracy, ±0.1% of reading between 20
to 100% of full scale, ±0.02% of full scale
between 0 to 20% of full scale. Generation 3
gauges have 32,000 point logging capacity
(Ultra Low Power) setting allowing logging for 1 year and PSV/
PRV (Pressure Safety/Pressure Relief Value) mode increasing
measurement rate to approx. 8x per second. Gen 2 gauges have
6,000 points and logging intervals from 1 second to 18 hours.
Logs actual pressure, average pressure, average pressure with
peaks and, on demand. Intrinsic and safety ratings registered
under IECEx, ATEX and DNV standards.
Druck DPI603 20 Bar Pressure Calibrator
DRU,DPI603-20 MY
Accuracy 0.075%FS. Pumps up to 20 bar pressure & -850mbar
vacuum. Measures up to 20 Bar pressure and -1 bar vacuum.
In-built 24V energising voltage. Monitors loop current to 55mA.
Loop voltage to 50V. Interface 1/8” bsp. Battery operated.
Druck DPI 611-2-NATA 2 Bar Pressure Calibrator
DRU,DPI611-2-NATA (4736) AU / DRU,DPI611-2 MY
IPLEX UltraLite 3.5m, 6mm diameter handheld
videoscope. With an integrated control unit
and LCD monitor for one handed operation.
Intuitive icons for menu control, 120°
articulation (up,down,right,left), still image
and video recording capabilities (approx. JPEG
300 KB and MPEG-4 600 KB/s), compliant to
IP55 and insertion tube operable underwater
to 3.5m (excluding stereo tip adapters not included).
Druck DPI 611-20-NATA 20 bar Pressure Calibrator
DRU,DPI611-20-NATA (4748) AU
DRU,DPI611-20 MY
Fully self-contained pressure test and calibration
system combines pressure generation, signal
measurement and loop power. Generates from
95% vacuum to 20 bar/300 psi pneumatic
pressure with 0.0185% FS accuracy. Calculates
PASS/FAIL errors and documents results. User
Guide stored in the memory of the instrument,
3-touch set-up for any application.
Druck DPI104 350 Bar Pressure Calibrator & HTP1 Hydraulic Pump
DRU,DPI104-350 MY
Range 0 to 350 bar. Measures 0 to 100mV (1µV resolution), 0
to 5V (0.1mV resolution), 0 to 50V (1mV resolution) & current 0
to 50mA (1µA resolution) all @ 0.025% accuracy. Sources 0 to
10V (0.2mV resolution) & 0 to 50mA (1µA resolution) @ 0.025%
accuracy. Voltage output regulated 10V ±0.1% current 30mA &
unregulated supply 24V ±10% current 50mA. Pressure switch
status. Pressure media oil, water & non corrosive gases. Battery
operation 10h or mains operation via charger. Complete with a
full range of pressure connection adaptors.
Druck DPI610-2-NATA 2 Bar Pressure Calibrator
DRU,DPI610-2 MY
Pneumatic pressure calibrator including pump and
current voltage standard. Pressure range -1 to 2 bar,
±0.025%FS. Voltage input ±50VDC, ±0.05%rdg,
±0.004%FS. Current input ±55mA, ±0.05%rdg,
±0.004%FS. Temperature -10~40°C, ±1 (ambient)
switch open/closed. Voltage output 10VDC, ±0.1% or 24V ±5%.
Current output 0 to 24mA ±0.05% rdg ±0.01%FS. Data logger
stores up to 10,000 values. mA ramp configurable. Pressure port G
1/8” (f), includes flexible hose kit. Pump includes screw adjustment.
Druck DPI610 20 Bar Pressure Calibrator
DRU,DPI610-20 MY
Pneumatic pressure calibrator including pump and current
voltage standard. Pressure range -1~20 bar +/- 0.025% FS.
Voltage input +/- 50 VDC +/-0.05% rdg +/- 0.004% FS. Current
input +/-55mA +/-0.05% rdg +/- 0.004% FS. Temperature
-10~40°C +/-1°C (ambient) switch open/closed. Voltage output
10 VDC +/-0.1% or 24 V +/-5%. Current output 0~24 mA.
0.075% FS Accuracy includes pump for vacuum and pressure.
Unit will pump up to 2 bar pressure and -850mBar vacuum.
Measurements can be made to 2 bar positive pressure and -1 bar
vacuum. Unit has a 24V energising voltage. Monitors loop current to
55mA DC loop voltage to 50V. Sealed to IP65. Rechargeable battery
operated. Unit can display in 24 different units. BSP 1/8 interface.
44
Pneumatic pressure calibrator including pump
and current voltage standard. Pressure range 0
to 20 bar ±0.025% FS. Voltage input ±50VDC
±0.05% rdg ± 0.004% FS. Current input ±55mA
±0.05%rdg ±0.004%FS. Temperature -10 to 40ºC
±1ºC (ambient) switch open/closed. Voltage output
10VDC ±0.1% or 24V ±-5%. Current output 0 to
24mA ±0.05%rdg ±0.01%FS. Data logger stores upto 10,000
values. mA ramp configurable. Pressure port G 1/8 female,
includes flexible hose. Pump includes screw adjustment.
Druck DPI620 GENII 20 Bar Pressure Calibrator
Advanced modular pressure calibrator with
HART, includes pneumatic pressure station
with 1/8 BSP(G) or 1/8 NPT test port, -1 to
20 bar pressure module and an accuracy of
±0.005% FS. Compact electrical, frequency, temperature calibrator
and HART communicator provides simultaneous measurement and
source capabilities for the setup, testing and calibration of most
types of process instruments including transmitters, transducers,
gauges/indicators, switches, proximity detectors, counters, RTDs,
thermocouples and valve positioners. Accuracy 0.020% FS (0°C to
50°C), 0.005% FS (at 20°C ±2°C).
Genii advanced modular pressure calibrator
with HART, includes hydraulic pressure
station with 1/8 BSP(G) or 1/4 NPT test
port and 350 bar gauge and absolute
pressure module, accuracy 0.005 and
0.015 %FS respectively. Compact electrical,
frequency, temperature calibrator and HART communicator
provides simultaneous measurement and source capabilities
for the setup, testing and calibration of most types of process
instruments including transmitters, transducers, gauges/
Indicators, switches, proximity detectors, counters, RTDs,
thermocouples and valve positioners.
1800 632 652
General Industrial
DRU,DPI620-1000 MY
Fitting Set with 700 Bar Hose
FIT,HP MY
Fitting set (max pressure = 10,000 psi) for pressure calibrators.
Comes with 700 Bar Hose, 20 Bar Hose and varous connectors.
Female connector sizes: 1/4 inch BSP & NPT; 1/8 inch BSP &
NPT; 3/8 inch BSP & NPT; 1/2 inch BSP & NPT.
Genii advanced modular pressure calibrator
with HART, includes hydraulic pressure
station with 1/8 BSP(G) or 1/4 NPT test
port and 1000 bar gauge and absolute
pressure module, accuracy 0.005 and
0.015 %FS respectively. Compact electrical,
frequency, temperature calibrator and HART communicator
provides simultaneous measurement and source capabilities
for the setup, testing and calibration of most types of process
instruments including transmitters, transducers, gauges/
indicators, switches, proximity detectors, counters, RTDs,
thermocouples and valve positioners.
Fitting Set With 20 Bar Hose
Druck DPI 620 Genii Process Calibrator with HART
Fluke 70 Bar Pressure Transducer & Pump suits FLU Calibrator
DRU,GENII (4778) AU
FLU,700P08-70BAR (4762) AU
An electrical, frequency and temperature calibrator with HART
communicator. Provides simultaneous measurement
and source capabilities for the setup, testing and
calibration of most types of process instruments
including transmitters, transducers, gauges/indicators,
switches, proximity detectors, counters, RTDs,
thermocouples and valve positioners. NATA certified.
Pneumatic transducer and pump system, range 0
to 70 bar, resolution 7 mbar, reference uncertainty
0.025%. Connection 1/4NPT and 1/4 ISO.
Includes 700PTP-1 pressure pump (Note the pump
will operate to 41Bar). Suitable for use with Fluke
Pressure, Documenting and Process Calibrators
such as the 725, 744, 754 etc. Nata certified.
Druck PV411A Multifunction Hand Pump Kit
Fluke 690 Bar Pressure Transducer & Pump
DRU,PV411A (4789) AU/MY
Provides up to 700 bar hydraulic, 40 bar pneumatic
pressures and vacuum to -950mbar. Built-in stroke
adjuster, lower pressure fine control and tamper proof
overpressure protection.
Druck UPS III-IS Intrinsically Safe Loop Calibrator
DRU,UPS III-IS (4777) AU
Measure or source 0 to 24mA and provide 24V loop
power. 50 VDC measurement and continuity. Accuracy
0.015% of reading, Hart compatible. Dual mA and %
readout, linear or flow. It is an essential tool for loop
testing, instrument maintenance and valve set-up, with
an easy-to-read display and simple-to-use time saving features.
Emerson Process Management 375 Field Communicator
EME,375 MY
Will configure, test, and diagnose your HART® and
Foundation FieldBus devices. Able to communicate
with any device, by any manufacturer. Intrinsically
safe. Easy upgrade over the Internet. Interfaces with
AMS PC Suite Software.
Emerson 475 Hart Communicator
FIT,LP MY
Fitting set (max pressure = 3,000 psi) for pressure calibrators.
Comes with 20 Bar Hose and varous connectors. Female
connector sizes: 1/4 inch BSP & NPT; 1/8 inch BSP & NPT; 3/8
inch BSP & NPT; 1/2 inch BSP & NPT.
FLU,700P31-690BAR (4771) AU
Range 0 to 690 bar, reference uncertainty
0.025%. Connection 1/4 NPT and 1/4 ISO.
Includes 700HTP-1 pressure pump. Suitable for
use with Fluke Pressure, Documenting and
Process Calibrators such as the 725, 744, 754 etc.
Fluke 345mbar Pressure Transducer & Pump
FLU,700PD3-345 MBAR (4734) AU
Dual pressure module, range +/-350mbar
differential or guage, reference uncertainty
0.04%, connection 1/4 NPT. Fluke hand
pump 700LTP-1 included. Suitable for use
with Fluke Pressure, Documenting and
Process Calibrators such as the 725, 744,
754 etc. Nata certified.
Fluke 7 bar Pressure Transducer & Pump
FLU,700PD6-7BAR (4745) AU
Range 1 to 7 bar, reference uncertainty .025%. Connection
1/4NPT and 1/4 ISO Includes 700LTP-1 pressure pump.
Suitable for use with Fluke Pressure, Documenting and Process
Calibrators such as the 725, 744, 754 etc.
EME,475 (4794) AU/MY
Will configure, test, and diagnose your HART® and
Foundation FieldBus devices. Able to communicate
with any device, by any manufacturer. Intrinsically
safe. Easy upgrade over the Internet. Interfaces
with AMS PC Suite Software.
Softing BC-600-PB Profibus Tester 4
SOF,PROFIBUS-4 (4723) AU
Allows full testing of live PROFIBUS segments with
minimum influence on their operation. Detects
transient faults that occur sporadically. Test
for non operation PLCs or suspicious devices.
Simultaneous analysis of both bus physics and bus
communication. Master simulator and Topology
scan. Expert tests: frame, oscillogram analysis and
trigger input/output. Long term trend measuring,
preventive maintenance and detailed test reporting.
Fluke 719 2 Bar-30G Pressure Calibrator including Electric Pump
FLU,719-30G (4740) AU
2 bar, includes pump and precision 4 to 20mA measurement and
source capability. The pump in this instrument is electric.
Uncertainty 0.025%. Precision pressure adjustment vernier.
Range -850mbar to 2 bar. Resolution 0.1mbar. 4 to 20mA
resolution .001mA .015%rdg + 2 counts.
Fluke Pressure Calibrator 8 Bar includes Electric Pump
FLU,719-100G MY
8 bar, includes pump and precision 4 to 20mA
measurement and source capability. The pump in
this instrument is electric. Uncertainty 0.025%.
Precision pressure adjustment vernier. Range
-850mbar to 8 bar. Resolution 1mBar. 4 to 20mA
resolution 0.001mA 0.015%rdg + 2 counts.
45
General Industrial
Fluke 725 Process Calibrator
FLU,725-NATA (4784) AU
FLU,725 MY
Fluke 789 Process Meter
FLU,789 PROCESSMETER (4786) AU/MY
Dual measure/source multifunction process calibrator.
Measure DC 30 V, resistance 3200Ω, 24mA and more.
Source/simulate DC 10V, 24mA, 3200Ω, 12 types
of TCs and 7 types of RTDs. Power transmitters with
internal loop supply. Split display allows view of input
and output values. (Includes NATA calibration - AU).
Standard multimeter functions with 2 to 20mA
sink and source capability, including a 24V supply.
HART 250Ω resistor, 20mA drive into 1,200Ω.
Simultaneous mA and % of scale readout on mA
output. 25% manual step plus auto step and auto
ramp on mA output. Min/max/average/hold/relative modes.
Double size dual display. Accuracy, VDC 0.1% +1, VAC 0.7% +2,
mA DC 0.05% +2, frequency 0.005% +1.
Fluke 726 Process Calibrator
Jofra DPC-500 Documenting Pressure Calibrator 1000 Bar NATA
FLU,726 MY
JOF,DPC-1000-NATA (4775) AU
Precision multifunction process calibrator. DC voltage
measurement. 0.010% 30V max, source 0.010% 20V
max. DC current measurement. 0.010% 24mA max,
source 0.01% 24mA max. Resistance measurement
0.015% 4kΩ max, source 0.01% 4kΩ max. Frequency
measurement 5 counts 1Hz to 15kHz, source 1 count
20Hz to 15kHz. Will measure and simulate 4 to 20mA,
TC E N J K T B R S and C, 2, 3 and 4 wire RTDs and frequency.
Loop power supply at: 24V, 22mA. Pulse Source 10k and read
100k. The unit operates from drycell batteries.
Documenting pressure calibrator is used for
high precision calibration of pressure gauges,
pressure transmitters, digital manometers,
pressure switches, overpressure protection
valves etc. Measure pressure at 1,000 bar
or 14,500 psi, voltage 0 to 10V, current
0 to 20mA and 4 to 20mA, and supplies 24VDC as source for
transmitters. Accuracy ±0.025% F.S. Supplied with Druck PV212
1,000 bar hand pump and calibration software. 15 user selectable
engineering units including user defined. Nata Calibrated.
SI PC6 20 Bar NATA Pressure Calibrator & Pump
Fluke 753 Documenting Process Calibrator
FLU,753 MY
Provides simultaneous source and measure volts,
mA, thermocouples, RTDs, frequency, ohms and
pressure to calibrate transmitters. It can power
transmitters during test, using loop supply with
simultaneous mA measurement; measure/source
pressure; create and run automated as-found/
as-left procedures to satisfy quality programs
or regulations; record and document results. Holds up to a full
week of downloaded procedures and calibration results. Features
include autostep, custom units, user entered values during
test, one-point and two-point switch testing, square root DP flow
testing, programmable measurement delay etc.
Fluke 754 Documenting Process Calibrator with HART
FLU,754 (4781) AU
Offers simultaneous source and measure capabilities
for all common process parameters. Measure/source
volts, mA, RTDs, thermocouples, frequency, and ohms
for the calibration, maintenance, and troubleshooting
of test sensors, transmitters and other instruments.
Compatible with all Fluke 700Pxx pressure modules.
Create and run automated as-found/as-left
procedures to satisfy quality programs or regulations.
Features include autostep, custom units, user entered values
during test, one-point and two-point switch testing, square root DP
flow testing, programmable measurement delay etc.
Fluke 773 Milliamp Process Clamp Meter
FLU,773 (4779) AU
Measure 4 to 20mA control lines, PLC loops,
transmitters or any 4 to 20mA line without
breaking the loop. Capable of 0 to 20.99mA
and 24 to 100mA with clamp. Source and
simulate mA and voltage signals in circuit.
4 to 20mA scaled o/p.
46
SI,PC6-20-NATA (4753) AU
Basic accuracy 0.025%. Range output pressure to 20 bar, output
vacuum to -1 b. NATA certified Instrument. Measures voltage
0~100mV (1µV resolution), 0~5V (0.1mV resolution) & 0~50V
(1mV resolution) and current 0~50mA (1µA resolution) all at
0.025% accuracy. Sources 0~10V (0.2mV resolution) & 0~50mA
(1µA resolution) also at 0.025% accuracy. Voltage output
regulated 10V ±0.1% current 30mA and unregulated supply 24V
±10% current 50mA. Pressure switch status. Battery operation
10h or mains operation via charger.
SI PC6 35 Bar NATA Pressure Calibrator & Pump
SI,PC6-35-NATA (4759) AU
Basic accuracy 0.025%. Range is 35 bar. Measures voltage
0~100mV (1µV resolution), 0~5V (0.1mV resolution) & 0~50V
(1mV resolution) & current 0~50mA (1µA resolution) all at
0.025% accuracy. Sources 0~10V (0.2mV resolution) & 0~50mA
(1µA resolution) also at 0.025% accuracy. Voltage output
regulated 10V ±0.1% current 30mA and unregulated supply 24V
±10% current 50mA. Pressure switch status. Complete with a full
range of pressure connection adaptors. Record logging capability
444 and RS232 interface download to spread sheet files.
Battery operation 10h or mains operation via charger.
Watch how-to videos using QR Codes
To complement our highly qualified
technical support team, we are creating
a range of informative how-to videos
for equipment in our rental inventory. If
you see a QR code on your equipment,
simply scan the code with a QR mobile phone app to
watch the relevant video. As we are constantly adding
videos and QR codes to our fleet, be sure to check our
YouTube channel for all the available videos, and do not
hesitate to contact our team if you have any questions.
1800 632 652
General Industrial
Wet & Dry Block Calibrators cont’d.
Fluke 9144 Dry Block Temperature Calibrator 50 to 660°C
NATA Certification
Jofra CTC-1200A Temperature Calibrator
FLU,9144-NATA (4833) AU
Field metrology well, NATA certified. Range 50 to
660°C, display accuracy ranges from ± 0.35°C
and stability from ±0.03°C. Insert ‘A’ hole sizes
9.52mm(3/8”) 2x 6.4mm(1/4”), 4.75mm(3/16”) and
3.17mm(1/8”). Well depth 150mm (5.9”). Includes
PC software and interface cable.
Fluke 9150 Thermocouple Furnace 150 to 1,200°C NATA Certified
JOF,CTC-1200A MY
Compact temperature calibrator. Lightweight,
portable for lab and general use. Temperature
range: 572 to 2200ºF (300 to 1205ºC). Excellent
Performance Characteristics. Accuracy: ±4.0ºF
(±2.0ºC). Stability: +1.0ºF (+0.5ºC). Stability Time:
20 minutes. Display in F or C to 0.1 resolution.
Fast cooling and heating. User-selectable Slope Rates for
controlled. Thermo switch testing. Self Diagnostics includes SemiAuto Switch Test and Hysteresis Test. Size of thermowell/insert:
6.5mm & 10mm. 1/4” probe. 1/2” probe.
FLU,9150-NATA (4840) AU
Temperature range 150 to 1,200°C. Stability ±0.5°C, display
accuracy of ±5°C across entire range. Display resolution 0.1 to
999.9°C, 1 degree above 1,000°C. Well diameter 32mm, well
depth 140mm, insert type 9150-A (3150-2) with hole sizes of
1.6, 3.2, 6.4, 9.5 and 12.7mm. Heating time 35min to 1,200°C,
cooling time 140min.
Rototherm C105 10,000 psi Pressure Recorder
ROT,C105 MY
Single pen recording. (±)1% span maximum.
1/2”(M) BSP connection. 255 mm diameter,
circular chart paper.
FLuke 9170 Dry Block Temp Calibrator -45 to 140°C NATA Certified
FLU,9170-NATA (4825) AU
Metrology dry well calibrator temperature range -45 to 140°C.
Display accuracy +/-0.1°C, stability +/-0.005°C full range,
resolution 0.001°C. Well depth 160mm (6.3”). Insert type A
with hole sizes; 3x 6.4mm(1/4”), 4.8mm(3/16”), 3.2mm(1/8”),
9.5mm(3/8”) and 19mm(3/4”). Large LCD, numeric keypad and
on screen menus.
Rototherm C105 16,000 psi Pressure Recorder
ROT,C105-6K MY
Single pen recording. (±)1% span maximum.
1/2”(M) BSP connection. 255 mm diameter,
circular chart paper.
Fluke 9170-R Dry Block Temperature Calibrator -45 to 140°C
FLU,9170-R-NATA (4825) AU
FLU,9170-R MY
Hioki 8841 8 Analogue, 16 Channel Memory Recorder
Metrology dry well calibrator. Temperature range
-45 to 140°C with built in reference thermometry.
Reference input accepts (not supplied) 100, 25
and 10Ω PRT’s. Display accuracy +/-0.1°C, stability
+/-0.005°C full range, resolution 0.001°C. Well
depth 160mm (6.3”). Insert type A with hole sizes;
3 x 6.4mm (1/4”), 4.8mm (3/16”), 3.2mm (1/8”),
9.5mm (3/8”) and 19mm (3/4”). Large LCD,
numeric keypad and on screen menus.
Memory 12bits x 4 megawords/ch for 2
analogue ch, to 1 megawords/ch for 8ch.
In-built FDD, type III PCMCIA card slot (for
flashcard & HDD up to 520Mb). Sampling rate
of 1MHz max. Functions memory, real time
record, RMS, real time/memory, X-Y memory, FFT. Trigger functions
level, window in, window out, voltage drop, RMS level, cycle, logic
pattern trigger 1,0 or X (disregard). When using logic channels,
logic probes must be rented separately. Measurement range
400VDC, 240V rms, low pass filters 5Hz, 500Hz, 5kHz or 100kHz,
input coupling DC, GND, AC. Large 10.4” colour TFT display for
settings and waveform display, wide thermal printer fitted. On
screen help function. All settings and waveforms can be saved to
media, waveforms can be saved as binary, text or bmp files.
Grant GR150-S5 Temperature Bath NATA Certification
GRA,GR150-S5-NATA (4820) AU
Water/oil bath and circulator for calibrating
temperature probes and analytical procedures.
Temperature ranges from ambient to 100°C with
water and 150°C with silicon oil. Requires 3L
oil (not supplied). Stability 0.005°C, uniformity
0.02°C and display resolution 0.1°C. Tank size
300mm W x 150mm D x 150mm H. Features
include digital temperature controller and display,
timer, alarms, offset adjustment and more.
Jofra CTC-650A Temperature Calibrator
JOF,CTC-650A MY
Exceptionally fast and has deep immersion depths
of 110mm (4.3 inch). Heats up to the maximum
temperature in just 20 minutes. Temperature range:
33 to 650°C. Accuracy: 0.9°C. Stability: 0.1°C.
Multi-Hole insertion tube: 1/4”, 1/8”, 3/8” and 3/16”.
HIO,8841 (4117) AU
Hioki 8842 16 Analogue, 16 Logic Channel Waveform Recorder
HIO,8842 (4150) AU
Memory 12bits x 16 megawords/ch for 2
analogue ch, to 2 megawords/ch for 16 ch.
Analogue input channel ranges 10mV to 50V
per div, 10X div, 400VDC, 240Vac rms max.
In-built FDD, type III PCMCIA card slot (for
flashcard & HDD up to 520Mb). Sampling
rate of 1MHz max. Functions memory, real time record, RMS, real
time/memory, X-Y memory. Trigger functions level, window in,
window out, voltage drop, RMS level, cycle, logic pattern trigger
1,0 or X (disregard). When using logic channels, logic probes must
be rented separately. Measurement range 400VDC, 240V rms,
low pass filters 5Hz, 500Hz, 5kHz, or 100kHz, input coupling DC,
GND, ac. Large 10.4” colour TFT display for settings and waveform
display, wide thermal printer fitted. On screen help function.
All settings and waveforms can be saved to media, waveforms can
be saved as binary, text or bmp files.
47
General Industrial
High Speed Waveform Recorders cont’d.
Data Loggers cont’d.
Hioki 8860 8 Channel High Speed Memory Recorder
ETM 9900 Intelligent Modem and IO. Sends SMS Messages
High speed memory recorder, 20MS/s sampling
rate, 8 analogue channels, 16 logic channels,
built in printer. 512MW or direct access
memory, 60GB hard drive built-in, PC card type
II slot up to 4GB ATA flash card (optional) USB,
LAN interface and large colour screen.
Can send a user defined alarm message
via SMS. Has 7 IO channels. Will provide
alarm messages for instruments such as
the ARL,NGARA, PRO,VIBRA & the TSI,8520
& 30. Will operate for around 4 months
on 2xD cell batteries when the alarm status
is checked once per hour. Can be put on
site and remotely programmed.
HIO,8860 (4129) AU
Hioki 8938 FFT Input Signal Module
ETM,9900 (4290) AU
HIO,8938 (4138) AU
FFT Module with anti-aliasing filter. Frequency
range DC to 400kHz, sampling rate 1MS/s.
Maximum input voltage 400VDC, 240V rms.
Hioki 9335 Wave Processor Software for Hioki 8835, 8835-01,
8841, 8842
HIO,9335 (4155) AU
Waveform Processor software, displays, converts to CSV, calculates
and prints waveforms with a PC. Review stored binary files from
Hioki 8835, 8835-01, 8841 and 8842 memory recorders. Only way
stored binary files can be viewed on a PC without having to re save
them with memory recorder as text files.
Data Loggers
Hioki 3641-20-Kit of 8 Temperature & Humidity Loggers
HIO,3641-20-KIT (4256) AU
Kit of 8 x temperature and humidity loggers.
Includes 1 x RS232C and 1 x USB communication
base, utility software, RS232C and USB interface
cables. Environment conditions for operation -20
to 70ºC, 80%RH (no condensation) Accuracy:
Temperature -40 to -0.1ºC ±1ºC, 0 to 35ºC ±0.5ºC,
35.1 to 70ºC ±1ºC. Humidity typical between ±5
to ±10% depends on temperature and humidity range. 8000 data
points x 2 channels, recording interval 2,5,10,15,20,30s and 1, 2,
5, 10, 15, 20, 30, 60min.
Hioki LR8431-20 10 Channel Memory Logger
HIO,LR8431-20 (4280) AU/MY
Datataker CANGATE Gateway & Garmin 5Hz GPS
Interface to allow dataTaker loggers and PC
(via RS232) to access CANBUS networks
including J1939 & OBD2. The device also
includes a Garmin 5Hz GPS system.
10 Channel Memory Logger with isolated
channel to 60VDC which will take
thermocouples. 10ms sampling USB
interface and USB memory stick. Logging
software included. Log directly to memory
stick. Includes battery for 2.5hrs continuous operation.
DataTaker DT80 5 to 15 Channel Logger with USB
Memory Stick Download
Hioki 8421-51 16 Channel Data Logger with Colour Display
DE,CANGATE (4236) AU
DE,DT80 MY
HIO,8421-51 (4271) AU
Measures voltage, current, resistance and
frequency. Up to 15 analogue (±30V) sensor
inputs. Each channel is independent and
supports: one isolated 3-wire or 4-wire input,
or two isolated 2-wire inputs, or three common referenced 2-wire
inputs. 12 flexible digital channels. Expandable to 300 analogue
inputs. Store up to 10 million data points in user defined memory.
16 analogue, 4 pulse input channels data
logger with colour display, PCMCIA card slot,
LAN interface built in, TCP/IP communication
supports real time PC logging, FTP, SMTP and
HTTP. Signal inputs- 100 mVDC, 1VDC, 10 VDC,
60VDC, 1-5VDC FS. Thermocouples K, E, J, T, N, W (WRe5-26), R,
S, B, -100 to 100ºC, -200 to 500ºC, -200 to 2,000ºC, RTD Pt100
-200 to 800ºC. Pulse input, accumulation 50,000C FS, 500,000C
FS, 5MC FS, 100MC FS, 2,500MC FS. Rotation 5,000/n (r/s)
FS. Recording interval selectable from 100ms, 200ms, 500ms,
1s, 2s, 5s, 10s, 20s, 30s, 1min, 2min, 5min. Max sampling
rate is dependent upon type of input signal. Internal Memory
16MB, 512MB PCMCIA FLASH card, 9334 Logger Communicator
software, 9642 LAN cable, 9641 pulse signal input cable all
supplied. Improved common mode rejection -100dB or better
when 50/60Hz, 140dB or better when 50Hz, using ch1 to ch16,
interval 5s, digital filter 50Hz selected. Faster sampling when
using Pt100, improved temperature characteristics.
DataTaker DT80M 5 to 15 Channel Logger with Built in Modem
DE,DT80M (4234) AU
Includes a built in GSM modem for internet
access to the device supports 2G and 3G
networks (GSM/GPRS/EDGE/WCDMA).
Measures voltage, current, resistance and
frequency. Up to 5 analogue (±30V) sensor
inputs. Each channel is independent and supports: one isolated
3-wire or 4-wire input, or two isolated 2-wire inputs, or three common
referenced 2-wire inputs. Store up to 10 million data points in user
defined memory. Generally used at sample rates of 1Hz and slower.
Datataker DT85 48 Channel Logger with USB Memory Stick Download
Hioki Kit of Three 9322 Differential Probe High Voltage
True RMS Interface
DE,DT85 (4233) AU
HIO,9322-KIT (4119) AU
Analogue inputs 32 isolated and 48 single
ended inputs. 2 x 4 digital input types. 2 x
serial sensor ports, Modbus capability, 4 x
SDI12 channels, USB memory stick interface
for easy data and programming etc. Operating
time on the internal battery is 1s sample 2.4h.
5s sample 3 days, 1min sample 1 month.
Used with many memory recorders, eg. Hioki
8835. Operating modes 3. DC mode for
waveform monitor output DC to 3MHz, AC
mode detection of power surge noise 1kHz to 10MHz. Rectified
true RMS output of dc & ac voltages. 40Hz to 100kHz response
speed 200ms or less. Max voltage DC 2kV, ac 1kV CATII, AC/DC
600V CATIII, balanced differential input 1/1,000 divider.
48
1800 632 652
General Industrial
Data Loggers cont’d.
Keysight 34980A Multifunction Switch/Measure Unit
KEY,34980A MY
34980A multifunction switch/
measure unit is a flexible,
reliable switching and data
acquisition platform. Suitable in
design verification, automated
test and data acquisition. 8-slot mainframe with 21 mix-andmatch plug-in modules. Scans up to 1000 ch/sec. Built-in 6½
digit DMM.LAN, USB 2.0, and GPIB connectivity, BenchLink
data logger software for easy data collection and analysis.
Includes 34934A Quad 4x32 Reed Matrix, 34937A, 32
channel form C/Form A general purpose switch and 34952A
multifunction module with 32-bit DIO, 2-ch D/A and totalizer.
Testo Saveris2 H2 kit of 10 Temperature
Humidity loggers
TES,SAV2-H2-10KIT (4250) AU
Kit of 10 includes a preconfigured WiFi hotspot
so the 10 loggers will save their data to the
cloud. The logged data is available on line. The
temperature sensor 0~40DegC +/- 0.3 DegC,
Humidity sensor 0~100% +/-2%RH. 4mm
diameter remote probe.
Testo 175-H1 Temperature & Humidity Logger
TES,175-H1 (4251) AU/MY
Large Display. 3 year battery life, 1 million sample
memory. RH 0~100% ±2%, temp -20~50ºC ±0.4ºC.
Includes USB interface to download data.
Testo 184 G1 Temperature, Humidity & Acceleration
Data Loggers Kit 10
TES,184G1-KIT10 (4252) AU
Kit of 10 Temperature, Humidity & Shock
Loggers. Simple to use with a tamperproof design.
-20~70DegC, 0~100%RH & 0~27g. HACCP
Certified. Has built in USB port and will download
to Android devices using NFC. Battery life 120Days
(15min sampling). Includes software for download of
data to A PC. Saves data by default to a PDF file.
See also Air Conditioning & Air Flow on page 58
Crystal XP2i Digital Logging Pressure Gauge 7 Bar NATA calibrated
CRY,XP2I-100-NATA (4341) AU
pressure gauge. Accuracy, ±0.1% of reading
between 20 to 100% of full scale, ±0.02% of full
scale between 0 to 20% of full scale. Generation
3 gauges have 32,000 point logging capacity
(Ultra Low Power) setting allowing logging for 1
year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode
increasing measurement rate to approx. 8x per second. Gen 2
gauges have 6,000 points and logging intervals from 1 second
to 18 hours. Logs actual pressure, average pressure, average
pressure with peaks and, on demand. Intrinsic and safety ratings
registered under IECEx, ATEX and DNV standards.
Pressure Vacuum Gauges/Recorders cont’d.
Crystal XP2i Digital Logging Pressure Gauge 20 Bar
NATA calibrated
CRY,XP2I-300-NATA (4341) AU
Range -1 to 20 bar (300 psi) Nata certified pressure gauge.
Accuracy, ±0.1% of reading between 20 to 100% of full scale,
±0.02% of full scale between 0 to 20% of full scale. Generation
3 gauges have 32,000 point logging capacity at intervals from 1
second to 18 hours, ULP (Ultra Low Power) setting allowing logging
mode increasing measurement rate to approx. 8x per second. Gen
2 gauges have 6,000 points and logging intervals from 1 second
Crystal XP2i Digital Logging Pressure Gauge 70 Bar NATA calibrated
CRY,XP2I-1K-NATA (4342) AU
Range 70 bar (1K psi) resolution 0.1m bar.
Accuracy is 0.1% of reading, down to 20% of the
range. Vacuum accuracy 0.25% of -1 bar (-14.5
psi). Generation 3 gauges have 32,000 point
logging capacity at intervals down to 125 msec
(in PSV mode). Generation 2 gauges have 6,000
point logging capability at intervals from 1 sec.
Logs actual pressure, average pressure, average pressure with
max and min and on demand. 1/4 NPT connector. Intrinsic and
safety ratings registered under IECEx, ATEX and DNV standards.
Crystal XP2i Digital Logging Pressure Gauge
206 Bar NATA calibrated
CRY,XP2I-3K-NATA (4343) AU / CRY,XP2I-3K MY
Range -1 to 206.8 bar (3,000 psi) Nata certified pressure gauge.
Accuracy, +/-0.1% of reading between 20 to 100% of full scale,
+/-0.02% of full scale between 0 to 20% of full scale. Generation
Crystal XP2i Digital Logging Pressure Gauge
700 Bar NATA calibrated
CRY,XP2I-10K-NATA (4344) AU / CRY,XP2I-10K MY
Range -1 to 690 bar (10,000 psi) Nata certified pressure gauge.
Accuracy, ±0.1% of reading between 20 to 100% of full scale,
±0.02% of full scale between 0 to 20% of full scale. Generation
GE Druck Wireless Air Data Test Set
GE,ADTS542F (4350) AU
Wireless Air Data Test Set. Pitot Static Tester
for Aircraft Maintenance. Remote control
unit for easy in cockpit control of instrument
settings. Self-contained rechargeable battery
operated allows 8 hrs of continuous use. Small
light weight unit (14kg). Accuracy suitable for RVSM validation.
Includes ECAS Low Airspeed option for Rotary Wing Aircraft.
49
General Industrial
See also Environmental Flow Meters on page 69
Flexim Ultrasonic Gas Flow Meter
FLE,G608 (6156) AU
Ultrasonic flow meter is a clamp-on transit time
gas and liquid flow meter, 2-channel, with Zone
2 Ex-certification for use in hazardous areas.
Supplied with three transducer pairs and a
pipe wall thickness gauge; includes an integral
data-logger with more than 100,000 measured
values, easy-to-use software for trending the data and an
integral Lithium-ion rechargeable battery with AC adapter.
The GLK transducers are suitable for 4 to 9mm wall thickness,
the GLM 2 to 5mm and the GSM 2.5mm and greater. Utilises
either Shear wave (standard) transducers, or Lamb wave
(specialist gas) transducers. The Lamb wave transducers
resonate the pipe wall to amplify the signal strength, thereby
allowing it to measure applications at significantly lower
pressures than the standard Shear wave transducers.
Flow Meters for Liquids & Gases cont’d.
See Also GLO,FP111 Global FP111 Digital Water Velocity
Meter on page 69
GE Panametrics PT878E Ultrasonic Liquid Flow Energy Meter
PAN,PT878E (6102) AU
Portable non-contact liquid flowmeter using
transit-time principle. Includes thickness
gauge and 2 sets of transducers, one
12.5mm to 50mm the second 50mm to
600mm diameters & temperatures -20 to
210 degC with clamping fixtures. Flow velocity
range 0.03 to 12.2m/s. Accuracy typically
1%. Data logging for over 100K data points. Outputs analog 4
to 20mA, digital (pulse or frequency) and USB port. Large LCD
display for velocity, volumetric and energy flow rate, totalised
flow and trend data in alphanumeric and graphical formats.
Rechargeable NiMH batteries and AC power supply/charger.
GE Panametrics PT878T Flowmeter including Liquid Thickness Gauge
GE Panametrics PT878GC Ultrasonic Gas Flow Meter
PAN,PT878T (6103) AU/MY
PAN,PT878GC-01 (6151) AU
Portable non-contact liquid flowmeter using
transit-time principle. Includes thickness
gauge and 2 sets of transducers, one
12.5mm to 50mm the second 50mm to
600mm diameters & temperatures -20 to
210°C with clamping fixtures. Flow velocity
range 0.03 to 12.2m/s. Accuracy typically
1%. Data logging for over 100K data points. Outputs analog 4
to 20mA, digital (pulse or frequency) and USB port. Large LCD
display for velocity, volumetric and energy flow rate, totalised
Portable non-contact gas flowmeter using
transit-time principle. For operation with
ultrasonic transducer-kits (PAN,GC-RL302
& PAN,GC-RL319) - available separately.
Compatible with metal or plastic pipes in
the range 20 to 300mm. Suitable for use
with compressed air, natural gas and other
gases. Readout for flow velocity, actual or
standard volumetric flow or mass-flow in numerical or graphic
format. Internal logging for 100K flow data points. Infrared
communications port for download to PC or printer interface.
Rechargeable battery for 8h continuous operation.
See page 51 for a case study on the PT878GC
Gas-flow Small Pipe Transducer Kit for PT878GC
PAN,GC-RL302 (6153) AU
Advanced clamp-on ultrasonic transducer pair for use with
Panametrics gas flowmeters. Operation at 1MHz for pipes in
the range 20 to 55mm typical. General purpose use for process
temperatures -40 to 176°C. Supplied with two precision gauged
clamping fixtures for pipe range.
Gas-flow Medium Pipe Transducer Kit for PT878GC
PAN,GC-RL319 (6155) AU
Advanced clamp-on ultrasonic transducer pair for use with
Panametrics gas flowmeters. Operation at 500kHz for pipes in
the range 75-300mm typical. General purpose use for process
temperatures -40 to 176°C. Supplied with set of three precision
gauged clamping fixtures for pipe range.
GE Panametrics PT878 Ultrasonic Liquid Flowmeter
PAN,PT878 (6101) AU/MY
Portable non-contact liquid flowmeter
using transit-time principle. Includes
transducers for pipe 50mm to 2m diameter
and temperatures -40 to 130°C (various
alternative transducers available) with
clamping fixture. Flow velocity range 0.03 to
12.2m/s. Accuracy typically 1%. Data logging for over 100K data
points. Analog inputs compatible with temperature transmitters
for energy-flow calculations. Outputs analog 4 to 20mA, digital
(pulse or frequency) and printer/computer (Infrared port). Large
LCD display for velocity, volumetric and energy flow rate, totalised
50
GE Panametrics 12 to 50mm Transducers
PAN,C-LP-40NM MY
Transducer pair for PAN,PT868/878 transit-time flowmeter to suit
pipe 12 to 50mmØ. Complete with CF-LP-50M mounting bracket.
Temperature range -40 to 120°C.
GE Panametrics -200 to 400°C Transducers
PAN,OKS (6112) AU
Very high temperature, wide range transducer pair for
PAN,PT868/878 transit-time flowmeter. Temperature range -200
to 400°C, for pipe 80mm to 600mmØ. Uses special clamp system
supplied. Appropriate protection and safe-handling equipment is
required for fitting and operation at very high or low temperatures.
Polysonics Hydra SX30 Dual Frequency Doppler Liquid Flowmeter
POL,HYDRA-SX30-2 (6132) AU
Dual frequency doppler ultrasonic non-contact
flowmeter. Velocity range 0.06 to 10m/s, accuracy
±1%. Pipe size range 12 to 5,000mm diameter.
Data logging for 90,000 points, with PC software
and interface cable for download via RS232C
interface. Transducer temperature range -40
to 122°C. Analogue output 4 to 20mA. Battery
operated, 12h continuous use (8h recharge).
1800 632 652
General Industrial
See also Environmental Gas & Vapour Meters on page 69
Combustion, Flue & Industrial Gas Analysers con’td
Testo 350XL Portable Flue Gas Analyser
TES,350XL (5917) AU
Novatech O2 and CO2 Analyser/Transmitter
NOV,1637-5 (5954) AU
Oxygen and carbon dioxide analyser for
packaging atmosphere, general industrial and
research use. Oxygen sensor reading 1ppm
to 100% with 1% accuracy. NDIR carbon dioxide analysis 0 to
100% ±3% of full scale. 2 x 4 to 20mA outputs, 1 common & 3
selectable alarm relays. Gas connection 1/8 Swagelok. Flow rate
with internal pump 100 to 500cc/min. AC operation.
Testo 335 Combustion Gas Analyser
TES,335 (5913) AU/MY
Measures O2, CO, CO2 (measured by NDIR),
NO, NO2 and SO2 concentrations plus
draught, temperature, excess air, and gross/
net efficiency values. Ranges: O2 0~25% vol,
CO2 0~50%vol, CO with H2 compensation
0~10,000ppm with measuring-range
extension and selectable dilution factor, NO 0~3,000ppm, NO2
0~500ppm, SO2 0~5,000ppm, draught 50hPa, temperature
-40~1,000°C. Includes switch-off and rinse function for CO
cell and fresh air rinse for longer term measurements. Internal
memory for 250,000 readings, with RS232C interface and
software provided. Operation from mains or rechargeable battery.
Portable industrial flue gas analyser.
Determines temperature (to 1,000°C),
draught/pressure (±40hPa), oxygen (21%),
carbon monoxide (10,000ppm) and nitric oxide
NO (3,000ppm) concentrations. Calculates
carbon dioxide concentration, efficiency
and flue gas loss. Threshold-protection of sensors, with 5X
autodilution of CO to 50,000ppm. Separate sensor-socket with
mini-probe for ambient temperature, and connection points for
compatible differential-pressure devices. Built-in condensate-trap
with warning and auto-switch-off. Internal memory (100 folders X
10 locations X 200 datasets each) for storage of measurementprotocols and data for printout. Supplied as kit with 335mm
probe, cone and shield-plate, cordless printer and power supply.
Rechargeable or AC operation (alkaline batteries used by printer).
Visit http://www.youtube.com/techrentals
for a variety of useful videos on the
Panametrics range and much more!
Gas Flow Troubleshooting
In the Field with the GE Panametrics TransPort PT878GC Ultrasonic Gas Flow Meter
TechRentals rented out a Panametrics PT878GC to a customer
intending to audit compressed air flow at their facility. The set up
involved 50 mm metal pipe with a known pressure of 7 bar.
The customer reported intermittent results and errors when
implementing tests, and requested assistance.
The PT878GC employs the transit-time principle for data collection.
This unobtrusive method of measurement means there is no obstruction
to internal flow, and no need to physically alter pipes to gain access.
TechRentals team member Graeme Murphy went out on-site to inspect
the set-up. The customer appeared to have installed the apparatus
correctly, with proper damping where the transducers were applied to
the pipe, and along the pipe itself, extending out past where the
bracket was mounted.
Damping with either mats or tape is crucial with ultrasonic signal
testing; particularly with metal piping. An echo like phenomenon
known as pipe signals can create interference and compromise
any return signal readings at the transducers.
Relocated
Apparatus
Extra Damping
Connector causing
interference
Before
After
Graeme further investigated by implementing proper test procedure and viewing the results. Errors were indeed frequent, and only
intermittent performance was attainable. A physical inspection of the unit mounting and pipes then followed, and it was discovered
that when touching a small strip of metal used for spacing of the pipe in question to an adjacent pipe, a steady reading was possible.
This implied that the pipe was not properly deadened although the damping appeared to be more than sufficient.
It was determined that the connector would be damped and the entire apparatus would be mounted
further away from the connector. Running the test protocol with the new set up yielded steady, error free
results, and the customer was able to successfully audit the compressed air flow in the pipe.
Read the
full article
51
Inclinometers
Force Gauges
Load Cells
Vibration Analysis
Speed Measurement
Non-Destructive Testing cont’d.
Defelsko Positest Pull Off Adhesion Tester for Concrete & Metal
DEF,POSITEST (4895) AU
Measures the force required to pull a specified
test diameter of coating away from its substrate
using hydraulic pressure. Pressure is displayed
in both MPa and PSI on a precision dial indicator
and can be related to the strength of adhesion to the substrate.
Suitable for coatings on both metal and concrete surfaces.
Conforms with standards ASTM D4541 and ISO 4624.
Det-tronics W8066 Ultraviolet Test Lamp
DET,W8066 (4860) AU
GE DynaMic Rebound Hardness Tester
GE,DYNAMIC (4936) AU
Rebound hardness tester tests to ASTM A956 and
DIN 50156. Will compensate for changes in testing
direction. Provides readings in HV, HB, HRC, HRB,
HS, HL & M/mm2.
Krautkramer DynaPocket Rebound Hardness Tester
KRA,DYNAPOCKET (4932) AU
Based on the Leeb’s method HL,
utilising a 3mm tungsten carbide
ball. Other hardness scales can be
selected, HS Shore, HB Brinell, HRB
Rockwell B, HRC Rockwell C, HV Vickers and N/mm2 tensile
strength. Choice of 9 material groups can be selected, they
are St Low-alloy/unalloyed steel and cast steel, ASt Tool steel,
SSt Corrosion resistant steel, GCI Gray cast iron, NCI Nodular
graphite cast iron, AL Aluminium cast alloys, brS Brass, brZ
Bronze, Cu Wrought copper alloys.
Portable, battery operated source of UV radiation.
Used to test UV flame detection systems. A fire
is simulated by the intrinsically safe device by
producing a beam of UV radiation. This beam
has the same wavelength as the response
range of Det-tronics UV Detectors. Enables the operator to
verify the proper system operation without the need for an
open flame. Comparable with a common flashlight, making
it easier to handle and operate than other test lamps.
Olympus Epoch 600 Flaw Detector
OLY,EPOCH600 (4900) AU/MY
General purpose ultasonic flaw detector.
Includes UT angle beam transducers 45,
60 & 70º, and Atlas dual element transducer.
Stores images and data to micro SD card.
Olympus Ultrasonic Thickness Gauge
OLY,27MG (4910) AU
Range 1~500mm, fast min mode. Resolution
0.01mm. Probe operates -20~150ºC.
Olympus 26mg Pocket Thickness Gauge
PAN,26MG MY
Range 1 to 500mm, fast min mode. Resolution 0.01mm.
Probe operates -20 to 150ºC.
Defelsko 6000 Ferrous & Non Ferrous Coating Thickness Tester
Olympus Ultrasonic Thickness Gauge
DEF,POS-6000 (4870) AU/MY
OLY,38DL (4905) AU
Ferrous/Non Ferrous metal coating thickness tester
with storage of up to 100,000 readings. Supplied
with external probe, calibration standards and
carry pouch. Measurement range 0 to 1500µm or
0 to 60 mils (selectable). Tolerance ±1µm +1% of
reading 0-50µm, ±2µm +1% greater than 50um.
Resolution 0.1µm. Backglow display, HiLo limits
audible & visible alerts when measurements
exceed specified limits. Continually displays
updates average, standard deviation, min/max thickness and
number of readings while measuring. Built in USB, Bluetooth and
Wifi for downloading readings.
Operates with dual and single element
transducers, has colour transflective VGA screen.
Includes datalogging capability. Does echo to
echo measurements. Supplied with transducers
to measure steel, cast, corroded steel, rubber,
fibreglass and composites. Includes D7906-SM, M1036,
M2008 M109-RM (inc delay line M202-RM) transducers.
PosiTector 200 B & C Ultrasonic Coating Thickness Gauge
DEF,POS-200ADV (4880) AU
Ultrasonic coating thickness gauge with type B
& C Probes. Measures coating thickness over
wood, concrete, plastics, composites etc. Will
measure up to 3 individual layer thickness in
a multi-layer system and features a graphic
readout. Supplied with both B, 13 to 1000µm for
wood, plastic and composites and C probes 50
to 3800µm for coatings on concrete, fibreglass
etc. Accuracy is ±2µm +3% of reading.
52
Olympus Ultrasonic Probe for OLY,38DL & OLY,27MG
OLY,D790-SM (4909) AU
Ultrasonic high temperature probe for OLY,27MG
and OLY,38DL 5MHz 7.9mm tip diameter.
Operating temperature range -20ºC~500ºC.
PCWI 30kVDC Porosity (Holiday) Detector
PCW,DC30 (4885) AU
DC Porosity (Holiday) detector. Detects pinholes in coatings
above 150μm on metal substrates such as pipes and tanks.
0-30kV, 3.5 digit LCD display with battery indicator, display
of voltage level. Alarm indicated on front panel, supplied
with rechargeable battery, 10h charger, probe handle with
neon and 2m length cable, 60mm connector for flat brushes,
7m earth cable with clamp, fan brush, 250mm flat brass
wire brush, 450mm probe extension. Dry conditions.
Olympus
ultrasound | phased array | eddy current | eddy current array | remote visual inspection
Olympus designs, manufactures, and globally markets a range of innovative nondestructive
testing, remote visual inspection instruments developed with a commitment to technology,
design, and user friendliness.
These products are used for inspection and maintenance in industrial and research fields
ranging from aerospace and energy to transportation and manufacturing. Olympus instruments
contribute to product quality and add to the safety of infrastructure and facilities.
Olympus has earned industry-wide reputations for providing cost-effective solutions and
excellent support and
customer service.
Solutions
Corrosion Testing
Weld Inspection
Security
Flaw Detection
Thickness Measurements
Technologies
Ultrasound
Ultrasound Phased Array
Eddy Current
Eddy Current Array
Remote Visual Inspection
Microscopy
Automated Testing
Image Capture
Material Identification
X-ray Fluorescence/Diffraction
Olympus Australia
www.olympus-ims.com
Non-Destructive Testing cont’d.
Force Gauges cont’d.
PCWI 40kV Pulse Porosity (Holiday) Detector
Mecmesin AFG-1000NALC Digital Force Gauge
PCW,P40-PULSE (4890) AU
MEC,AFG-1000NALC (4428) AU
Pulse porosity (Holiday) detector. Detects pinholes
in coatings and wrapping above 150µm on metal
substrates such as pipes and tanks. Can be used
on dry or wet surfaces. 0~40kV output, 4 digit LED
display of voltage, alarm sensitivity setting between dry and wet.
Supplied with rechargeable battery, 10h charger, red probe handle
and 2m length of rubber coated cable, 60mm connector for flat
brushes, 7m earth cable with clamp, fan brush, 250mm flat brass
wire brush, 450mm probe extension and 80mm probe extension.
Range 0 to 1,000N accuracy 0.1%. 5 digit back lit display.
Peak data sampling rate 5kHz. 120% overload warning,
display invert (reverse) function, dual max, max tension & max
compression plus current reading. Outputs: analogue, RS232
& Mitutoyo. Accessories: test hook, compression plate, 130mm
& 30mm extension rods, rotary coupling. Mounting tapped holes
x 2, M5 x 0.8 x 5.5mm deep max. Optional smart sensors can be
used, such as TW60 static torque wrench.
Load Cells
MEL M5-200 4 to 20mA Optical Position Transducer
MEL,M5-200 (5315) AU
Optical distance measurement device 4 to 20mA
output. Will measure distance from 240mm to
440mm with an accuracy of 0.06mm. Does not
require a reflector on the surface of the device.
Light spot diameter is 10mm. Light sensor is IP67. 4 to 20mA
transmitter is IP40. Will operate from 10 to 30V. Relay outputs
indicate error condition. 1ms, 2ms or 20ms adjustable reaction
time. Light source infrared 890nm invisible.
Inclinometers
Gloi ALiSensor Level and Flatness System
Futek IHH500 Pancake Load Cell 2T Capacity
FUT,IHH500-2T (4416) AU
TheIHH500 display & LCF500-FSH02968
loadcell operate at up to 20 tonnes
(50,000lb) in compression and tension.
The IHH500 handheld display is a logging
microcontroller which can store up to 21000
points, it is powered by a rechargeable
battery which can last for up to 30 hours depending on battery
condition and load. It will operate from its mains charger if
needed. The system has a simple ‘Tare’ function and can display
‘Max Hold’ using a single front panel key. The lead that connects
the loadcell to the display is 1.6 Meters long. The load is
connected via M33x2-Threads. There are two eye bolts supplied
with the system, however the eye bolt capacity is 7 ton. The
software is supplied on a USB flash drive/dongle.
Futek IHH500 Pancake Load Cell 20T Capacity
FUT,IHH500-20T (4418) AU
Force Gauges
The IHH500 Display & LCF500-FSH02968
loadcell operate at up to 20 tonnes (50,000lb)
in compression and tension. The IHH500 hand
held display is a logging microcontroller which
can store up to 21,000 points, it is powered
by a rechargeable battery which can last for up to 30 hours
depending on battery condition and load. It will operate from
its mains charger if needed. Has a simple ‘Tare’ function and
can display ‘Max Hold’ using a single front panel key. The lead
that connects the loadcell to the display is 1.6 Meters long. The
load is connected via M33x2-Threads. There are two eye bolts
supplied with the system, however the eye bolt capacity is 7 ton.
The software is supplied on a USB flash drive/dongle.
Hiliti Fastener Test System includes SafeRIngs Systems
Vibration Analysis
GLO,ALISENSOR (5325) AU
Precision level system including an iPad with
applications for Straighness, Squareness,
Flatness, Spindle Parallelism, Spindal
Perpendicularity, Shaft Level and Shaft Plumb.
Angle can be measured to 0.001º and flatness
can be determined to 0.0025mm. Includes a magnetic fixture.
HIL,HAT28M (4465) AU
A purpose-made system for testing fastenings. It
consists of a mechanical screw arrangement acting
through a hydraulic load cell which measures the
load applied to the fastener directly.
Hilti Safety Bolt Inspection System
HIL,TESTER4 (4460) AU
Inspection system to test safety bolts (Safe Ring
Bolts) on the exterior of buildings. The instrument
will check the bolts to AS1891.4-2000 Industrial
fall arrest systems and devices. Part 4: Selection,
Use & Maintenance or to AS4488.2-1997 Industrial rope access
systems Part 2: Selection, Use & Maintenance. These tests
need to be performed on a yearly basis on exterior connection
points on building. These safe ring connection points will typically
be used to suspend window cleaning harness systems.
54
See also Noise & Sound Analysers on page 67-68
Fluke 810 Vibration Tester
FLU,810 (5050) AU/MY
Tests rotating machinery to determine the
status of gearing wear etc. Used to: Troubleshoot
equipment and understand cause of failure.
Commission new equipment and ensure proper
installation. Includes triaxial accelerometer and
laser tacho. Store and reports FFT images to your PC. Very simple
output that reports Pass and Fail on machinery condition.
GCDC High Impact USB Accelerometer
Data Logger X500-2
GCD,X500-2 AU
USB impact accelerometer provides 3 axis 512Hz sampling.
Built in 2G micro SD card. 500g sensors
Major Projects
Is your major project?
• Road or Rail Infrastructure
• Power Generation
• Telecommunication
• Construction
• National Broadband Network
• Port Infrastructure
With over 40 years experience, TechRentals’ technical experts will assist you in delivering the right test
and measurement solution for your major project. Whatever the duration, the best solution will
be tailored to your requirements, making this part of your project simple and easy.
TechRentals offer equipment for electrical power measurement and analysis, general industrial
applications, physical measurement, radio frequency, environmental and OH&S, data and
telecommunications, electronics, and more.
Through TR Hirecom, TR Telecom, and TR Calibration, the product range broadens to include two way
radios, satellite telephony products, and instrument calibration services.
With access to our vast Australia-wide business network and global partners’ inventories, you can
be assured we will deliver the best solution for you.
Your trusted partner in technology.
Offering innovative solutions
through our leading brands:
Melbourne
•
Sydney
•
Newcastle
•
Brisbane
techrentals
•
To w n s v i l l e
hirecom
•
Adelaide
telecom
•
Darwin
•
Perth
Vibration Analysis cont’d.
Vibration Analysis cont’d.
GTI Spindle Vibration Analyzer and Balancing System
TMS Portable Vibration Calibrator including Wobulator Option
GTI,IPAD3VAB (5040) AU
TMS,9110D-WOB (5080) AU/MY
This system is based around an iPad. Measurement
range ±196m/s2, frequency range 1.6 to 10kHz.
Includes accelerometer on a 3m lead with a
magnetic base and an optical position sensor.
Measures Acceleration or Velocity giving a 0~20kHz FFT display.
Portable calibrator will test accelerometers,
velocity transducers and proximity probes. It
can provide 7Hz to 10kHz vibrations. Maximum
amplitude 20g (no load). Maximum payload
800gram. Includes an interface to most common
accelerometers and a report generation capability.
Profound Vibra Ground Vibration Logger
PRO,VIBRA (5023) AU/MY
Designed for long term ground vibration logging.
Includes a Geophone and remote alarm with
flashing light. Velocity Range 0 to 100mm/s.
4 weeks operation on 3 x D cell batteries. USB
interface. Download possible while measuring.
Full Windows analysis software included. IP65
case. Meets standards for ‘Vibration in buildings’
- Effects on structures’ and ‘Effects on persons in buildings.
TR Viblog Vibration and GPS Logger
TR,VIBLOG (5060) AU
Incorporates a 3D accelerometer, a 3D gyroscope
and a 10Hz GPS system. Logs 10 measurements
per second. Records these measurements
and also provides a Google Earth plot of the
horizontal vibration and vertical vibration by
location. A histogram of the vibration against velocity is provided
also. The loggers battery lasts around 24hrs. Has sufficient
memory to record 10 samples per second over this time.
Profound Vibra Plus Ground Vibration Logger
PRO,VIBRA-PLUS (5023) AU
Designed for long term ground vibration logging.
Includes a Geophone and remote alarm with
flashing light. Velocity Range 0~100mm/s. 4 weeks operation on
3xD cell batteries. IP65 case. The Plus model provides dominant
frequency information and includes a Modem so alarm messages
can be emailed and sent via SMS, and a daily report can be emailed.
Rion VA-11 Vibration Analyser
RIO,VA-11 MY
Includes 2 pickup types hand held (PV55)
and magnetic type (PV57). Measures
acceleration, velocity and displacement.
Displays RMS, peak and crest factor. Uses
FFT to display power and vibration spectrum.
Incorporates PCMCIA card flash memory for data storage. RS232 interface available. PV57 1Hz to 5kHz, PV55 3Hz to 20kHz
(velocity 3kHz, displacement 500Hz). Acceleration 0.02 to
316mm/s2 rms. Velocity 0.1 to 1,000mm/s rms. Displacement
0.003 to 28.3 (EQ PP). High pass filter 3Hz, 10Hz & 1kHz. Low
pass 1kHz, 5kHz and 20 kHz. Stores 500 measurements.
The TR Viblog Vibration and GPS Logger was the
equipment used in the Vehicle Condition Monitoring
article on the following page. You can watch a how-to
video on the TR Viblog or read the whitepaper Australian
Railways’ Weakest Link via the QR codes below.
Watch
the video
Read the
white paper
Speed Measurement
Rion VA-12 Vibration Analyser
RIO,VA-12 (5040) AU/MY
Includes magnetic pickup type. Will store
measurements. Measures acceleration, velocity
and displacement and displays it in either time
or frequency domain. It will display rms, peak
and crest factor. Uses FFT to display power
and vibration spectrum. Incorporates SD card
memory storage.
Svantek SV100 Whole Body Vibration Analysis
Phantom 53550 Radar Gun with Case and Tuning Fork
PHA,53550 (5324) AU
Doppler K band (24.150GHz) stationary radar
gun. Pull the trigger and the speed display
appears instantly. Invisible to all radar detectors.
Power requirements 10.5 to 16.5VDC, 13.5VDC
nominal, 1.5A max, external source, connection via 1.8m coiled
power cord with fused lighter plug. Operating environment -20
to 60ºC, 90%RH @ 37ºC (non-condensing). Accuracy ±0.17kph.
Accuracy verification tuning fork (K-Band), internal 90kph.
Speed range 17 to 332kph.
SVA,SV100 (5005) AU
Completely self-contained, integrated unit.
Does whole body vibration dose (exposure)
measurements, octave measurements,
time domain record measurements and
motion sickness measurements. Includes
external alarm, car power adapter or will run
from battery pack for >16hrs. USB interface
for programming and download.
56
Vehicle Counts PC2500 2 Channel Vehicle Volume & Speed Counter
VEH,PC2500 (5320) AU
An automatic traffic counter used to collect
vehicle traffic data on roadways. It collects
data from one or two road tubes (rubber hose)
stretched across the road. Can be used to collect data for traffic
volume, vehicle classifications, and/or vehicle speeds.
Vehicle Condition Monitoring System
How to reduce track damage and derailment risk
TechRentals has developed a condition monitoring system to measure the lateral and vertical acceleration experienced by
railway vehicles. This enables not only track problems to be identified but also enables the vehicle performance itself to be
evaluated on a comparative basis. The system was developed particularly for railway use however the system has potential
for use in any analogous transport system.
The system is based on a GPS system updated at a 10Hz rate with measurements
provided by a triaxial accelerometer. The physical implementation is quite simple and
all that is required is for the measurement apparatus to be placed in the vehicle for
the duration of the journey. The data is transferred to a memory card with the output
subsequently processed to create a unique output format that utilizes Google Earth data
as a reference. This output format clearly shows track ab-normalities and also allows
the responsible staff to compare the performance of different rail vehicles across the
same section of track. The presentation is such that the concept and operation can be
understood with the briefest of training.
The image in figure 1 shows a significant problem highlighted by the magnitude of the red
and white line deviations. The red is the vertical and the white is the horizontal movement.
The location of the problem is readily identified very accurately using GPS coordinates, etc.
Figure 1
In figure 2 we have a typical log which allows the magnitude of the movements to be
easily determined together with the speed, etc. This shows a vertical acceleration
of between 1.95g and .44g. The horizontal was -.2 to .3g horizontally at a speed of
124.5kph. The log is continuous allowing further analysis.
The instrument will also provide histograms that summarize the horizontal and vertical
vibration performance of the vehicle for different speeds. This enables different vehicles
to be compared across the same piece of track.
The system allows extensive routine measurements to be taken without the use of
specialised measurement vehicles at the actual service speeds using standard vehicles.
There is no disturbance to normal track operation. Apart from passenger service
customer comfort there are savings by minimising track damage and establishing
optimum vehicle speeds.
Figure 2
There is the potential to investigate a relationship between vehicle design or adjustment, freight loads, and speed
with a view to gaining the maximum long term handling capacity from existing track. The cost savings from such an
investigation can be substantial.
Construction
Airflow 36 Pitot Tube
AIR,PITOT-36 (5816) AU
Pitot tube (36”) for use with manometers and micro manometers.
Air Conditioning & Air Flow cont’d.
Druck DP1705 Pressure gauge 7 Bar ABS
DRU,DPI705-7BARA (5810) AU
Handheld digital pressure gauge range 0~7bar absolute, with remote
sensor, accuracy 0.1%. Displays all common engineering units.
Oriflow Cobra Duct Leakage Tester to AS4254.2
ORI,COBRA (5820) AU
Duct leakage tester complete with 25, 50, 75,
100mm orifice plates and calibration certificates.
Includes 3.8m of 125mm flex duct, 1hp 240VAC,
50Hz blower, 6m of vinyl pressure tubing, digital
gauges on a fully portable wheeled, powder coated
cart incorporating a variable speed drive. This
unit is fully compliant with the latest EN1507,
EN12237, Eurovent 2/2, DW/143, SMACNA and
AS4254.2-2012 standards.
Alnor EBT-721-A3 Electronic Micromanometer
ALN,EBT-721-A3 MY
Detachable multi-purpose digital manometer that can be used
with the following test and balance tools, such as pitot, air foil,
temperature, relative humidity probes or a 16-point velocity
matrix. Differential pressure: ±15 in. H2O, (3735 Pa) 150 in.
H2O maximum safe operating pressure. Absolute pressure: 15 to
40 in. Hg (356 to 1016 Hg). Velocity: 25 to 8,000 ft/min (0.125
to 40 m/s) pitot probes; 25 to 5,000 ft/min (0.125 to 25 m/s)
air flow probe; 25 to 2,500 ft/min (0.125 to 12.5 m/s) velocity
matrix. Volume: 25 to 2,500 ft3/m (42 to 4250 m3/h) capture
hood. RH: 0 to 95% RH (optional probe), Temperature: -40 to
250°F (-40 to 121°C) probe dependant. Standard comes
with 2ft x 2ft, upon request additional hood of 2ft x 4ft and
1ft x 4ft hood would be provided.
Alnor EBT731 Balometer Electronic Balancing Tool
ALN,EBT-731 MY
Features a detachable multi-purpose digital
manometer that can be used with the
following test and balance tools, such as
pitot, static pressure probe or a 16-point
velocity matrix. Volume Range: 25 to 2,500
ft cube/min (42 to 4250 m cube/h) with
capture hood. Velocity Range:25 to 2,500 ft/
min (0.125 to 12.5 m/s) with velocity matrix.
Unit comes with 2ft x 2ft,2ft x 4ft and 1ft x 4ft hoods.
CSS Portable Smoke Generating Machine
CSS,COLT4 (5890) AU
Portable smoke generator with variable
smoke emission rate. Suitable for air flow
visualisation, HVAC ductwork leak-testing,
fire training and general work. Pump-free
operation with smoke fluid supplied from
consumable aerosol cans. Manual or continuous operation and
off-power facility. Maximum output 31 cubic meters/min at 1.5m
visibility. Operation for 18min from one can at maximum capacity.
Druck DP1705 Manometer 0 to 20kPa
DRU,DPI705 (5808) AU
Handheld digital manometer range 0 to 20kPa, accuracy 0.2%.
Displays all common engineering units.
Druck DPI705-IS Manometer 0 to 20kPa Intrinsically Safe
DRU,DPI705-IS (5809) AU
Hand held Manometer 0 to 20kPa range. Accuracy
0.2%. Displays all common engineering units
Intrinsically Safe.
58
Testo 417 100mm Vane Anemometer
TES,417 (5839) AU
Vane anemometer 100mm head. Display velocity
and temperature. Has averaging function to
measure ducts. 0.3~20m/sec ±(0.1m/s + 1.5% mv)
Temperature 0~50ºC ±(0.5ºC). 50Hr battery life.
Testo 420 Air Balancing Flow Hood System
TES,420 (5825) AU
Includes 610x610, 360x360, 305x1220, 610 x
1220 hoods and stand and 500mm pitot tube.
Measures 40~4000m 3 /hr ±3%, Temperature
0~70°C ±0.5°C -20~0°C ±0.8°C, 0~100%RH
±1.8%+3%Rdg, Differential Pressure 0~120Pa
±2%Rdg+.05Pa. Kit includes a stand and an Android
or iPhone app can be downloaded for one man
remote operation. Kit includes 500mm pitot tube.
Testo 445 Vane Anemometer with 16mm Vane
TES,445 (5842) AU
Micro-vane probe. Simultaneous digital display of air
velocity and temperature, with continuous-update,
max, min & mean functions. Volume-flow option
with entry of duct dimensions. Telescope mounted
metal probe, vane 16mmØ. Operating range 0.4 to
60m/s, accuracy ±0.2 m/s, ±1%mv up to 40m/s.
Temperature range -30 to 140ºC for short-term measurements.
Selectable site-locations, and 3,000 point internal memory for
manual saving or automatic data logging. Battery powered.
TSI VelociCalc 100mm Vane Anemometer with Volume Display
TSI,8324 MY
Vane anemometer with 100mm head, supplied
with handle and 900mm articulated telescopic
extension. Velocity measurement range 0.25 to
30m/s ±1%; temperature measurement range 0
to 80ºC ±0.5ºC. Volume display range 0 to 4.36
x 106m3/h with input for circular or rectangular duct dimensions.
Variable time-constant; sample statistics average, max and min;
and “sweep” mode for extended continuous sampling. Internal
memory for single point measurements or time-based data
logging, for up to 2849 samples and 1,000 test IDs, with serial
interface, cable and software for data download. Direct data
acquisition [polling] from PC terminal modes. Battery powered
with auto-power-off, and optional AC adaptor.
1800 632 652
Construction
TSI 8375 Accubalance Modular Air Balancing Tool
TSI TA465A Multi-Function Ventilation Meter
TSI,8375 (5827) AU
TSI,TA465A MY
Balometer with detachable micromanometer
(TSI 8710) for air balancing applications. With 610
x 610mm air capture hood for measurements
in the range 42 to 4250m3/h with automatic
compensation for barometric pressure and air
temperature, 45cm pitot probe [range 0.13 to
41m/s], 16-point velocity matrix probe [0.13-13m/s]
and static pressure probes [differential pressure range ±3735Pa
with safe limit 37kPa, absolute pressure range 47 to 135kPa.
Accuracy typically 2% for pressure, 3% for flow. Large, multi-line
backlit LCD display for single or statistical readings with min, max
and average of up to 1,000 values of each measured parameter.
Manual result storage or automatic data logging up to 1,000
time/date stamped readings. RS232 port for data transfer to
PC or serial printer, with cable and “LogDat” download software.
Rechargeable with approx 12h operation, or AC adaptor.
Portable, hand held, Multi-Function Ventilation
Test Instruments. It comes with differential
pressure. It also comes with the 966 articulate
probe which measures air velocity, temperature
and humidity. Calculations include air flow,
heat flow, turbulence, wet bulb and dew point
temperature. Velocity Measurement Range: 0 to 9,999 ft/min
(0 to 50 m/s) Accuracy: ±3% of reading or ±3 ft/min (±0.015 m/s)
Resolution: 1 ft/min (0.01 m/s) Temperature Measurement
Range: 14 to 140°F (-10 to 60°C) Accuracy: ±0.5°F (±0.3°C)
Resolution: 0.1°F (0.1°C) Humidity Measurement Range:
0 to 95% RH Accuracy: ±3% RH Resolution: 0.1% RH.
TSI 8380 Balometer & Hood Kits
TSI,8380 (5826) AU
Includes 8715 manometer and logging capability.
Includes 610 x 610, 305 x 1220, 610 x 1220,
305 x 1525 and 915 x 915 hoods.
TSI 8386A VelociCalc Air Conditioning Efficiency Meter
TSI,8386A MY
Portable efficiency measurement system for HVAC and related
work, with hot wire anemometer, static and differential pressure,
temperature and humidity measurement with heat flow efficiency
calculation. Velocity (hot wire) 0 to 50m/s, accuracy ±3%.
Temperature -10 to 60°C, accuracy ±0.3. Wet bulb temperature 5 to
60°C. Relative humidity 0 to 95%RH, accuracy ±3%. Dewpoint -15
to 49°C. Static/differential pressure -1,245 to 3,735Pa, accuracy
±1%. Probe length 100cm, tip diameter 7mm, base diameter
10mm. Includes data logging and printing. Battery operated.
TSI 8710 DP-CALC Differential Micro-Manometer
TSI,8710 (5813) AU
Micro-manometer for static or differential
pressure, velocity, volumetric flow, atmospheric
pressure and temperature. With statistical
analysis, density correction, K factor and
automatic actual/standard flow calculation. Differential pressure
range ±3735Pa. Velocity display to 41m/s (range depends on
probe). Supplied with static tip, pitot tube, velocity matrix and
temperature probe. Datalogging (1,000 point) with RS232C
interface and software. Rechargeable cells or AC adaptor.
TSI 9535 Anemometer with Logging Capability
TSI,9535 (5845) AU
Includes data captured download software and USB cable. Logs
velocity and temperature. Will calculate flow rates. 0 to 30m/s
Accuracy 3% of reading or ±015m/sec whichever is greater.
Temperature range -18 to 93°C ±0.3°C. Runs 4 x AA batteries.
TSI 9555 Multi-Function Ventilation Meter
TSI,9555 MY
Portable, hand held, multi-function ventilation meter. Comes with
differential pressure and 966 articulate probe which measures
air velocity, temperature and humidity. Calculations include air
flow, heat flow, turbulence, wet bulb and dew point temperature.
Velocity measurement: Range: 0 to 9,999 ft/min (0 to 50 m/s),
Accuracy: ±3% of reading or ±3 ft/min (±0.015 m/s), Resolution:
1 ft/min (0.01 m/s). Temperature measurement: Range: 14 to
140°F (-10 to 60°C), Accuracy: ±0.5°F (±0.3°C), Resolution:
0.1°F (0.1°C). Humidity measurement: Range: 0 to 95% RH,
Accuracy: ±3% RH, Resolution: 0.1% RH.
TSI 9565A VelociCalc Air Conditioning Efficiency Meter
TSI,9565A (5849) AU
Portable efficiency measurement system for HVAC
and related work, with hot wire anemometer, static
and differential pressure, temperature and humidity
measurement with heat flow efficiency calculation.
Velocity (hot wire) 0 to 50m/s, accuracy ±3%.
Temperature -10 to 60°C, accuracy ±0.3. Wet bulb
temperature 5 to 60°C. Relative humidity 0~95%RH, accuracy
±3%. Dewpoint -15 to 49°C. Static/differential pressure -3,735
to 3,735Pa, accuracy ±1%. Probe length 1m, tip diameter 7mm,
base diameter 10mm. Includes data logging and printing. Battery
operated. USB & Bluetooth download.
See also Data Loggers: Testo Temperature & Humidity
Loggers on page 49
Tour & Anderson Scope Balancing Meter 1000kpa
TA,CBI MY
Digital pressure balancing instrument with LCD display. For
cooling water valve balancing in air conditioning plants and
similar applications. Firmware revision 3A. Includes facility for
entry of Kv value to allow balancing of all hydronic valve types.
Differential pressure range -0.5 to 20.5m water gauge at a total
pressure of less than 200m. Resolution 0.001m. Flow resolution
0.001l/s. Battery operated.
Tour & Anderson Scope Balancing Meter 1000kpa
TA,SCOPE (5801) AU
Digital flow balancing instrument with color
display. For cooling water valve balancing
in air conditioning plants and similar
applications. Includes facility for entry of
Kv value to allow balancing of all hydronic
valve types. Differential pressure range -0.5
to 20.5m water gauge at a total pressure of
less than 200m. Resolution 0.001m.
Flow resolution 0.001l/s. Battery operated.
Learning to operate unfamiliar equipment
costs you time and can lead to errors.
Read about our Configuration and
Download solution on page 23
59
Construction
See also Endoscopes, Borescopes & Visual Inspection on page 40
See also Pipeline & Cavity Inspection on page 62
Elcometer 331-B Basic Cover Meter
ELC,331-B (4924) AU/MY
Displays depth and orientation of the reo bars.
Deep search head supplied. 40mm diameter
bar depth 35 to 180mm depth, 8mm diameter
bar depth 25 to 160mm depth. Rechargeable
battery allows 32h of continuous operation (20h with backlight).
Concrete Testing Equipment cont’d.
Proceq Profoscope Rebar Locator & Cover Meter
PRO,PROFOSCOPE (4926) AU
Rebar locator and covermeter. Short range
measurements to 95mm. +/-3mm accuracy. Long
range 185mm accuracy +/-4mm. The unit will
determine the position of the rebars, the mid point
between rebars, Concrete cover, estimation of bar
diameter & the orientation of the rebar. Powered by
2 x AA batteries. Battery life 15h with backlight 55h without.
Proceq Resistivity Meter
Elcometer 331-SH Cover Meter with Half Cell Measurement
PRO,RESIPOD (4925) AU
ELC,331-SH (4919) AU
Can determine the likelihood of corrosion and
the corrosion rate in concrete. 0 to 1,000kΩ
measurement range. USB interface, USB charging. Waterproof.
Displays the depth and orientation of the reo bars. Standard
search head. 40mm diameter bar depth 15 to 95mm. 8mm
diameter bard depth 8 to 70mm. Rechargeable battery allows
32h of continuous operation (20h with backlight). Autosizing of
bars or orthogonal measuring of bar sizes. Internal storage of
readings of depth of cover in batches which can be downloaded
to PC with supplied software. XP and Vista supported.
Hilti PS200 Ferroscan System
HIL,PS200 FERROSCAN (4920) AU
Portable, quick and easy to use for detecting
rebar and other ferrous objects in concrete
structures. Provides accurate on-site rebar
location, depth and diameter with the
PS 200M monitor. Scans can be evaluated on the monitor or
transferred to a PC or laptop for further evaluation and report
generation. Portable wireless operation, easy integrated
LCD display makes setting up the scan easy while providing
information over the scan process. Fast data download via
infra red beam from scanner to monitor. Convenient Scanner
stores up to 9 image scans and 30m of Quickscans.
Proceq SilverSchmidt UN Concrete Test Hammer
PRO,SIL-UN (4928) AU
Requires no corrections for angle of test,
simple one button operation, datalogging
capability with USB download with detailed
reporting capability. Impact Energy 2.207Nm.
Compressive strength range 10~170MPa.
Battery Life >1000 Impacts before recharging is required.
Proceq PL-200PE Ultrasonic Concrete Test System
PRO,PL-200E (4927) AU
Can determine depth of perpendicular cracks,
slab thickness from a single side and it can
also locate and measure voids, pipes, cracks
parallel to the surface. It will estimate the
‘internal’ compressive strength of the concrete.
Hilti PS250 Ferroscan System
HIL,PS250 (4921) AU
Portable, quick and easy to use for detecting
rebar and other ferrous objects in concrete
structures. Provides accurate on-site rebar
location, depth and diameter with the
PSA100 monitor. Scans can be evaluated on the monitor or
transferred to a PC or laptop for further evaluation and report
generation. Portable wireless operation, easy integrated
LCD display makes setting up the scan easy while providing
information over the scan process. Fast data download via
infra red beam from scanner to monitor. Convenient Scanner
stores up to 9 image scans and 30m of Quickscans.
Hilti PS1000 X-scan Concrete GPR System
HIL,PS1000 (4922) AU
A GPR system with 3 transmitters and
5 receivers that has been designed
to provide a 3D image of the location of reinforcement bars
and other metallic and non-metallic objects in concrete.
Accuracy ±10mm. It will measure to a depth of 300mm.
Proceq 2000-ND Digi Schmidt Test Hammer
PRO,2000-ND (4930) AU
Concrete hardness tester (Schmidt hammer).
Supplied complete with inbuilt graphical LCD for
setting up and graphical display of results, up to 500 results can be
stored. RS232 interface and software supplied for down loading.
Impact energy 2.207Nm. Engineering units of results in N/mm2,
MPa, psi, kg/cm2. For concrete thickness greater than 100mm.
60
Protimeter Moisture Measurement System
PRO,MMS-PLUS (4955) AU
Moisture meter for detection of moisture in non
conductive solid materials such as wood and masonry.
Two measurement modes, search for qualitative
measurements and measure mode for precise and
localised moisture content. Supplied with pin type
probes, deep wall probes, hygrometer probe and extension
cord for RH, ambient temperature or dew point temperature.
Hygrostick probe supplied for surface temperature measurement.
Logging software and RS232 computer interface supplied.
See also Cable & Pipe Tracers & Fault Locators on page 24
C.Scope DXL2 & SGV2 Cable and Pipe Locator
CSC,DXL2-SGV2 (3720) AU
Cable and pipe avoidance and location tool with
depth measurement. Simultaneous dual 33+131kHz
frequency will assist in the detection of smaller
buried pipes and cables such as telecoms, cast iron
and street lighting spurs. 4 level power adjust up to
1W and depth detection to 3m (depending on soil
type). Four detection modes; Power, Radio, Generator and Allscan.
Features a Dynamic Swing Sensor to aid in cable and pipe location.
1800 632 652
Construction
Underground Services Location cont’d.
Vivax VLOCPRO Pipe & Cable Location System
UE Systems UP3000 Digital Ultrasonic Leak Detector
VIV,VLOCPRO (3740) AU
UES,UP3000 (3810) AU
Pipe and Cable locator with intuitive menu
system, colour display, peak, null, left/right
and orientation (compass) response to support
your preference. Configured with 6 location
frequencies, power and radio modes. 10W transmitter can apply
the location signal by connection, induction or signal clamp.
Depth detection up to 6 to 9 meters in broad-peak mode.
Displays dB levels. Readings can be stored
and downloaded. A tone generator is supplied
together with a stethoscope probe and a rubber
focusing probe. Interface software to download
readings is also supplied.
Vivax VLOCPRO2 Pipe & Cable Location System
VIV,VLOCPRO2 MY
Pipe and cable locator with intuitive menu
system, colour display, peak, null, left/right
and orientation (compass) response to
support your preference. Configured with 6
location frequencies, power and radio modes. 10 W transmitter
can apply the location signal by connection, induction and signal
clamp. Depth detection up to 6 to 9 m in broad-peak mode.
Remote Concrete Pour Temperature
Sensing and Sample Control Using Modbus
TechRentals have developed a simple solution for the monitoring of the concrete curing
process that also provides ‘matched temperature’ control of the concrete pour samples.
The benefits include a more accurate estimation of concrete strength and potential
shortening of the period before additional construction can commence.
An application of the Modbus protocol has enabled the efficient implementation of concrete
pour temperature remote monitoring and also control of the storage environment of concrete
test. The system is sufficiently undemanding in installation for it to be supplied as a rental
system however many users would find it practical to have it as a standard tool.
A dataTaker model DT80M logger is used to gather 30 channels of thermocouple data at the concrete pour and the data is
linked to a second DT80M at a remote office location. The site data is monitored for obvious errors and faulty thermocouple
data is automatically rejected. The office logger controls a thermal bath and maintains this as an accurate analogue of
the site concrete pour temperature. Site samples are placed in the bath and thereby are maintained in closely matched
conditions to those in the construction. The samples can therefore be subjected to mechanical testing with a high degree of
confidence. This together with the precise monitoring of the site curing process considerably increases the confidence in the
state of the concrete. This allows for earlier formwork striking times with an earlier start to prestressing and consequently
significant savings. This system is simple to implement with the baths currently in use.
The first implementation of the system was in a remote location in Queensland.
The dataTaker data loggers and associated hardware are available from TechRentals who also wrote the associated
software. TechRentals sales engineers are always ready to offer advice on any aspect of test and measurement
instrumentation selection and use.
61
Construction
See also Endoscopes, Borescopes & Visual Inspection on page 40
Aqua Snakeeye Video Inspection System
AQU,SNAKEEYE3 (5145) AU
Handheld video system. For remote
inspection work. It is very light and
compact. Includes a 12.7cm TFTLCD display and 3cm diameter camera including illumination.
Various adapters are supplied for mounting the camera to:
a) your hand,
b) a 45.7cm arm with 90 degree articulation,
c) a 9 m extension cable or
d) an arm which extends from 1.6 to 3.6m.
Includes memory card and will save images to card.
GE Everest Ca-Zoom
GE,EVEREST CA-ZOOM (5131) AU
Ca-Zoom and hand-held controller is a
portable, case-mounted, camera controller
with real-time, multitasking software
operating system which supports file storage
on 64MB of internal flash memory and CompactFlash removable
storage media. Provides for integrated image capture and full
motion video recording capabilities, on-board file manager and
annotation. Includes connectors for camera, handheld controller,
video input/output, USB streaming, and keyboard for text
generation. Supplied with 30m camera head cable and extension
pole 1.8 to 3.6m. Camera heads must be chosen separately, see
model GE,EVEREST PT-70 and GE,EVEREST PTZ-140.
GE Everest PTZ-70 Camera Head
GE,EVEREST PTZ-70 (5130) AU
70mm in diameter (fits through a 76mm opening)
and features 10x optical zoom and 4x digital zoom
for a total of 40x zoom. Eight 5-watt LED lights with
variable intensity control, 360°continuous pan
direction and 270°tilt capability. Waterproof to
45m or 4.5 bar (65 psi). Requires the GE,EVEREST
CA-ZOOM to operate.
Pipeline & Cavity Inspection cont’d.
Wohler VIS2000Pro 30m Colour Camera & Roller Guide
WOH,VIS2000PRO (5149) AU
Suitable for inspection of ventilation ducts,
chimneys, chambers and flue gas systems, etc. Kit
consists of colour display with a joystick to control
camera. 30m push rod cable on a reel, with a nonwaterproof, splash resistant (IP64 rated) 51mm
diameter colour camera with illumination. Accessories include a
Roller Guide to allow the camera to be pushed down a pipe. Can
save still images and video to a memory card. Video out function.
Wohler VIS340 Service Camera Visual Inspection System 30m
WOH,VIS340-PT (5143) AU
WOH,VIS340 MY
Compact colour video inspection system with
26mm forward facing and 40mm Pan Tilt colour
cameras. Viewing angle 120 degree, waterproof
according to IP68(3 bar-30m) and IP67(2 bar20m) respectively. Bright white LEDs on 30m of
flexible push rod with metric markings. Battery powered 7” high
resolution colour screen with removable monitor and SD video
recording. Applications incl damage analysis in water / drainage
/ sewer pipes, inspection of hollow spaces, ventilation, machines,
control panels, exhaust systems and production surveillance.
Wohler VIS-350 Service Camera Visual Inspection System 30m
WOH,VIS350-PT (5142) AU
30 meter compact colour video inspection
system with 26mm forward facing and 40mm
Pan/Tilt colour cameras. Waterproof according
to IP 68 and IP 67 respectively. Adjustable
illumination, camera orientation/gravity and
degree of inclination display, 8.9kHz sonde in each camera
detectable with the L-200 locator down to approximately 1.5
meters (depending on soil type). Memory storage 1 hr/Gb.
Applications include damage analysis in water/drainage/sewer
pipes, inspection of hollow spaces, ventilation, machines, control
panels, exhaust systems and production surveillance.
GE Everest PTZ-140 Camera Head
GE,EVEREST PTZ-140 (5129) AU
140mm diameter colour camera module (fits
through a 140mm opening) and features a
360°pan, 234° tilt, 36x optical and 12x digital
zoom, high-intensity lighting and waterproof
packaging to 45m or 4.5 bar (65 psi). Requires
the GE,EVEREST CA-ZOOM to operate.
Vivax vCam-5 Pipeline Camera Inspection
System 60 meters
VIV,VCAM5-60M (5134) AU
Vivax 60 meter pipeline inspection system with
self-levelling camera D34 (without camera skid
diameter is 34mm, with skid it’s 44mm). The
push rod has a 512Hz/640Hz sonde which can
be located by the ‘VM-540 Camera and Sonde
Locator’ supplied. The push rod can also become
a Tracer Rod with the connection of a utility locator transmitter
(not supplied) to energize the entire rod length. Records video(AVI)
and still images direct to HDD, USB or SD card. The vCam-5 has
a 4x digital zoom and includes a full text writer with the ability to
change font and background colors, internal/external voice-over,
built-in rechargeable battery, camera test port, and Wi-Fi interface.
Camera submersion depth up to 11 bar/110m.
62
See also Light Meters, UVA/B/C Measurement on page 69
ikeGPS Precision GPS and Laser Distance and Camera System
IKE,300PRO (5301) AU
Intergrated precision GPS (1.5m), laser based
range finder (300m), Precision compass,
precision inclinometer and camera system.
Used to geolocate and document. It can be used
to remotely dimension cable and buildings, etc.
Follow TechRentals on LinkedIn and stay
up-to-date on Test and Measurement
news, application notes, and case studies.
Communicate - Anywhere, Anytime!
Stay connected with 24/7 access to voice, email, and data
telecom
Ensure peace of mind on your next trip
Don’t get caught without reception - rent a Satellite Phone.
The perfect device to maintain a critical lifeline no matter where you are.
With access to both Iridium and Inmarsat networks, as well as ongoing
technical support from our friendly team, you’ll have peace of mind knowing
you are always connected with a satellite phone.
 Only pay for the calls you make
 No monthly access fees
 No capital outlay
Avoid Capex
and rent the
Explorer!
 Short, medium, and long term rental options
 Ongoing service and full technical support
 Phone comes in a ‘Grab ‘n’ Go’ pelican case
Rent the Explorer 700 BGAN Satellite Terminal and benefit
from reliable, high speed data no matter where you are




1300 550 014
Flexible data packages available with no monthly access fees
Download and upload speeds up to 492 kbps
Single or mutli-user connectivity
Compact and easy to use
[email protected]
www.trtelecom.com.au
SAVE 10%
When you mention this ad!*
*Terms and conditions apply.
TS0225
Environmental & OHS
Water Quality, pH Meters & Eletrochem
Weather Stations
See also Combustion, Flue & Industrial Gas Analysers
on page 51
Aeroqual Logging Ozone Monitor - Indoor Air Quality Use
AER,500L (5958) AU/MY
Portable ozone monitor fitted with low
concentration-range detection head. Operating
range 0~0.5ppm ozone with display in ppm
or mg/m3. Gas sensitive semiconductor (GSS)
sensor for accurate low-level measurements,
T90 response approximately 100s. Operation
from mains power supply or battery pack
(4h operation). Internal data logging for 8000 points with
software and cable for download to PC, or data logging direct
to PC. Application for indoor air quality measurements.
Geotech Landfill Gas ExMonitor
GEO,GEM5000 (5940) AU
Measures CH4, CO2, O2, CO & H2S. Designed for
spot measurements. Intrinsically safe and has
a built in GPS system. It can also measure flow
rates from bore holes and perform landfill gas
energy calculations.
Ion Science Gascheck Helium, Butane & SF6 Detector
Environmental Gas & Vapour Meters cont’d.
PPM HTV-M Formaldehyde Meter
PPM,HTV-M MY
Portable Formaldehyde meter for measuring airborne
formaldehyde in the workplace. Electrochemical
sensor, with internal pump for rapid response.
Operating range 0 to 10 ppm with readout on 4 digit
LCD display. Kit includes field calibration standard.
Operates from 9V alkaline battery or dc adapter if
used as a continuous data logger. The mini USB
allows data to be downloaded to PC using the htV-m software.
Minirae 3000 Advance Handheld VOC Monitor
RAE,MR3000 MY
Handheld volatile organic compound (VOC) gas
monitor. Its Photoionization Detector’s (PID) extended
range of 1 ppb to 10,000 ppm makes it an ideal
instrument for applications from HazMat/Homeland
Security, industrial hygiene, to Indoor Air Quality and
military applications.
RAE Systems PPB Photoionization (PID) Volatile Organic
Compound (VOC)
RAE,PPB3000 (5928) AU
Handheld volatile organic compound (VOC) gas monitor.
Its photoionisation detector’s (PID) extended range of
1 ppb to 10,000 ppm makes it an ideal instrument for
applications from HazMat/Homeland Security, industrial
hygiene, to Indoor Air Quality and military applications.
See also RKI,EAGLE2 Gas Detector Confined Space Plus
PID on page 65
RH Systems 973-SF6 Analyser
RH,973-SF6 (5910) AU
Measures the purity of SF6 gas. Uses a fast
acting mirror system to measure humidity.
Displays direct % purity. Includes a gas
recovery system. Includes built in test for
instant verification of the system accuracy. Dew Point
measurement -55 to 20°C, pressure 0.1~30 Bar. Accuracy ±0.5°
dew point. Gas coupling is done via a quick connect fitting.
ION,GASCHECKG3 (5907) AU/MY
Microthermal conductivity gas detector. Reading
in cc/s, g/yr, mg/m3 or ppm. Detects most gases
however particularly suited to ammonia, argon,
butane, helium, hydrogen & SF6. Calibrated
against Helium. Battery Life 40h. Sensitivity
(cc/s) He 1x10-5, CH4 5x10-5, R12 5x10-5,
Ar 1x10-4. Accuracy 5% of displayed reading
+ 1 digit. Response 1s. Flow rate 2cc/min.
Operating -20 to 60°C. Data logging, stores 10 readings.
Wika GA-15 SF6 Leak Detector
WIK,GA-15 (5909) AU
A fast response SF6 leak detector which will detect
concentrations of SF6 down to 3ppmv. Only detects
SF6 and is unaffected by moisture and wind.
PetroSense PHA-100 Petroleum Hydrocarbons in Water Detector
PET,PHA-100 (5945) AU
Portable hydrocarbon analyser for insitu realtime
petrochemical contamination. Measures Total
Petroleum Hydrocarbons (TPH) in water and water
vapour. Uses a fibre optic chemical sensor (FOCS).
Measures 0.1ppm xylene in water ad < 10ppm in
vapour. Accuracy ±15% of readings. Response time
<5sec. Certified to EPA Method 8020.
64
Alcolizer Wall Mount Alcohol (BAC) Breath Tester
ALC,WM3 (5980) AU
Wall mount Alcohol Breath Tester (BAC or
breathalyzer). Automatic recalibration every 24hrs.
Very simple to use. Australian Standards Certified
- AS 3547 Type III Low cost maintenance and
consumables (standard drinking straws).
1800 632 652
Environmental & OHS
Personal Gas & Vapour Monitors cont’d.
Airborne Dust & Particle Meters cont’d.
BW Bump & Logging Download for BW,MICROCLIP
TSI 8530 Aerosol Monitor and Logger
BW,BUMP (5938) AU/MY
TSI,8530 (5873) AU/MY
Automatic calibration testing and data
management system for the BW microclip gas
detection equipment. Carries out fully automatic
“hands-free” calibration and functional bump
test. It also enables data collected during
operation of the BW microclip to be downloaded.
Portable dust and particle monitor, light
scatter photometer. Measure concentrations
corresponding to PM1, PM2.5 & PM10. Aerosol
concentrations 0.001 to 150mg/m3. Used for
industrial/occupational hygiene surveys, indoor
air quality monitoring, outdoor environmental
monitoring, baseline trending and screening, etc.
BW Gas Alert Micro Clip Confined Space 4 Gas Detector
BW,MICROCLIP (5937) AU/MY
Continuous LCD shows real time gas concentrations.
Simple 1 button operation. Measures: H2S 0 to
100ppm (1ppm resolution), CO 0 to 500ppm
(1ppm resolution), O2 0 to 30% (0.1% resolution)
and Combustible gases 0 to 100% LEL (1%
resolution), 0 to 5% v/v (0.1% resolution). Alarms: visual, vibrating
and audible (95dB), Low, High, STEL, TWA and OL (over limit).
Lithium polymer battery life 12hrs (typical) recharge time <3hrs.
TSI Environmental Enclosure for the TSI,8530
TSI,8530-ENC (5875) AU/MY
Enclosure to suit the TSI,8530. Includes two
additional batteries and charger. Includes
waterproof enclosure and heat shield and
enclosure stand.
TSI Environmental Enclosure for the TSI,8530 Dusttrak II
BW Sampling Pump for BW,MICROCLIP
TSI,8530-ENC-S (5876) AU
BW,GA-SPAK (5939) AU/MY
Enclosure to suit the TSI,8530. Includes two additional batteries
and charger. Includes waterproof enclosure.
Motorised sampling pump that provides 300ml/min for remote
sampling up to 18m away. Runs continuously for 30hrs on
batteries. Includes 3m sampling hose. Includes built in water
traps and particulate filter.
TSI 8533 Aerosol Monitor and Logger
BW GasAlertExtreme Single Gas Ammonia NH3 Detector
BW,GA-NH3-KIT (5935) AU/MY
Single gas sensor for NH3 (Ammonia). There are two in
the kit including a bump station with 50ppm gas.
TSI,8533 (5870) AU
Portable dust and particle monitor, light
scatter photometer. Measure concentrations
corresponding to PM1, PM2.5 and PM10.
Aerosol concentrations .001 to 150mg/m3.
Used for industrial/occupational hygiene
surveys, indoor air quality monitoring, outdoor environmental
monitoring, baseline trending and screening etc. Will size
particles in three sizes PM1, PM2.5 and PM10.
RKI Eagle2 Gas Detector, Confined Space plus
Photoionisation (PID)
RKI,EAGLE2 (5930) AU
TSI AM510 Personal Aerosol Monitor; CSA & ATEX IS approvals
Measures 4 confined space gasses CH4, O2, H2S and
CO plus a PID. Alkaline 18 hours or Ni-MH 20 hours
capability. Powerful long-life pump up to 38m range.
Low flow pump shut off and alarm. Datalogging
standard. IrDA communications port. Autocalibration/ single
gas calibration. Internal hydrophobic dust filter. External probe
with hydrophobic filter. Ergonomic RFI/EMI/chemical/weather
resistant enclosure. Intrinsically safe design, CSA approval.
TSI,AM510 (5871) AU
See also RAE,PPB3000 PPB Photoionisation (PID) Volatile
Organic Compound (VOC) on page 64
TSI 8525 P-Trak Ultrafine Particle Counter
TSI,8525 (5877) AU
Range 0.01 to 5 x 105 particles/cm3. Particle
size range 0.02 to greater than 1micron.
Includes PC software and cable. Suitable for
detection of ultrafine particles associated
with pollutants. Battery powered (8h operation
using alkaline batteries).
Wearable dust monitor. Built in Impator allows you
to chose either ‘none’, 1, 2.5 or 10µm particle
sizes. Datalogs TWA in the range of particle
concentrations from .001 to 20mg/m3 Runs
9.2hrs on rechargeable NiMH batteries. USB
download capability. CSA & ATEX IS approvals.
Fluke 975 AirMeter Indoor Air Quality Monitor
FLU,975 MY
Indoor Air Quality (IAQ) monitoring,
measure temperature, humidity, CO2 and
CO concentrations. Humidity range 10 to
90%, temperature range -20 to 50°C. CO
measurement range 0 to 500 ppm and CO2
range 0 to 5000 ppm. Dew point temperature
and wet bulb temperature is calculated.
Data logging for 25,000 data point with 1min
to 1h interval. Comes with USB cable for download interface
and software viewing and reporting. Battery operated.
65
LAF Technologies Pty Ltd
Testing, Monitoring &
Laboratory Products
Laboratory Equipment
Indoor Air Quality Monitoring
Cleanroom & Facility Monitoring
Ventilation Test Instruments
•
•
•
•
•
•
•
•
•
•
•
•
Vacuum Equipment
Baths & Circulators
Ovens & Furnaces
Forensic Equipment
Incubators & Chambers
Chemical & Powder Safe Handling
Handheld Particle Counters
Portable Particle Counters
Fixed / Remote Particle Counters
Liquid Particle Counters
Gas Particle Counting
Complete Facility EMS Monitoring Systems
Contamination Control Products
•
•
•
•
•
•
Biological Safety Cabinets
Cytotoxic Cabinets
Laminar Flow Cabinets
Professional PCR Cabinets
Isolator Technologies
Fume Cabinets
•
•
•
•
•
•
•
•
•
•
•
Multi-Function IAQ Monitors
Dust Monitors, Particle Counters & Sizers
Microbial Air Sampling
Filters & Filter Testing Equipment
Portable Odour Monitors
Air Balancing Hoods
Vane Anemometers
Duct Leakage Testers
Sound & Vibration Meters
Digital Micro Manometers
Particle & Dust Monitoring
•
•
•
•
•
•
Personal Dust Monitors
Portable Dust Monitors
Tripod Based Dust Monitors
Fixed Dust Monitoring Stations
Particle Research Instruments
Testing and Certification Services
Fume Cupboards
Cytotoxic Drug Cabinets
Fume Cabinets
Class 1 Biological Safety Cabinets
Laminar Air Flow Cabinets
Class 2 Biological Safety Cabinets
Class 3 Safety Cabinets & Isolators
Particles in Gas / Compressed Air
Decontamination Services
Particulate Cleanliness
Cleanrooms & Workstations
HEPA Filtration Testing
Professional testing and certification of fume cupboards in
accordance with AS/NZS 2243.8 Australian standards
Professional testing & certification of fume cabinets (luminance,
smoke & velocity) to AS/NZS 2243.9 Australian standards
Professional testing and certification of laminar air flow cabinets
in accordance with AS 2252.6-2011 Australian standards
Professional testing and certification of class 3 biological safety
cabinets and isolators to the highest standards
Decontamination of cabinets, incubators and rooms utilizing
the latest iHP technology to achieve a 6 log kill
Cleanroom and workstation testing & certification in accordance
with ISO 14644-3
State-of-the-art Calibration
Laboratories
Education & Training
Services
Professional testing and certification of cytotoxic drug cabinets
in accordance with AS2567 Australian standards
Professional testing & certification of class 1 biological safety
cabinets in accordance with AS 2252.1 Australian standards
Professional testing & certification of class 2 biological safety
cabinets in accordance with AS 2252.2 Australian standards
Accurate and reliable particulate testing in compressed air and
gas in accordance with ISO8573-4 standards
Particulate cleanliness testing in accordance with AS/NZS and
ISO14644.1 international standards
Professional testing & certification of HEPA filters to AS1807.6,
AS1807.7 or ISO14644-3 standards
Professional Servicing
& Support
NATA Accredited Test and
Certification Services
LAF Technologies Pty Ltd
Head Office: 12 Royan Place, Bayswater North, VIC 3153 Australia
Call: 1300 306 002 www.laftech.com.au
66
1800 632 652
Environmental & OHS
Air Quality & Heat Stress cont’d.
Testo 635-2 Humidity, Temperature & Dewpoint Meter
GE Panametrics PM880 Industrial Moisture Analyser
TES,635-2 (5859) AU
PAN,PM880 (5911) AU
Portable humidity meter fitted with robust stainless
probe with sintered filter-cap for general or duct
measurements to 120ºC, and fast-action K-type
surface temperature probe. Displays relative
humidity, absolute humidity, dew point, degree of
humidity, enthalpy, temperature, and differential
temperature (dewpoint~surface). Operating range
2~98%RH (±2%). Air temperature -20~120ºC
(±0.2/0.5). Surface temperature -60~300ºC (±0.1). Internal
memory for 10,000 values with USB interface, cable and
software for download and presentation. Battery operated.
Intrinsically safe moisture analyser for
compressed air systems, non-corrosive
gases & hydrocarbons such as natural gas
(IS certification to ATEX and CSA). Displays
dew point, moisture concentration, pressure
& temperature. Dew point calibrated
measurement range -80 to 20°C with data to
-110°C. Pressure range 7 to 69 Bar limited by sensor, gauge and
safety-valve (operating range from 5µHg). Temperature range -30
to 70°C. Gas flow operating range from static to 10,000cm/s
velocity. Supplied with compact sample system with gauge,
safety-valve, sampling valves and fittings (¼” Swagelok). Data
logging of up to 100K moisture points, with infrared port and
software for download. Battery powered only (15-24h operation)
with second battery and charger (note charger is not IS).
Testo 635-2 Temperature & Dewpoint Meter for
Compressed Air Systems
TES,635-2-HPD (5912) AU
Portable humidity meter fitted with 0636 9836
HPD pressure dewpoint probe for measurements
in compressed air systems, -60 to +50ºC tpd,
0~100%RH. Internal memory for 10,000 values
with USB interface, cable and software for
download and presentation. Battery operated.
Testo 645 Humidity & Dewpoint Meter
TES,645-1 (5858) AU
Portable humidity meter fitted with robust
stainless probe for ambient work or duct
measurements to 120°C. Displays relative
humidity, absolute humidity, dew point,
degree of humidity, enthalpy and temperature.
Operating range 2 to 98%RH [±2%], -20
to 120°C [±0.4/0.5]. Battery operated.
TSI Q-TRAK IAQ Monitor CO2, CO Temperature & Humidity Logger
TSI,7565 (5861) AU
Measures CO2 0 to 5,000ppm ±3%, temperature
0 to 60ºC ±0.6ºC, humidity 0 to 95% ±3%, CO
0 to 500ppm ±3% and barometric pressure
517.15 to 930.87mmHg ±2%. Calculates
dew point, wet bulb and percent outside air.
Displays 5 measurements simultaneously.
User selectable logging interval and start stop
times. Stores 39 days data at 1min intervals
56,035 data points. This unit also has external
thermocouple measurements.
TSI Q-Trak plus Indoor Air Quality Monitor with Logging
TSI,8554 (5860) AU
Indoor air quality (IAQ) monitor for temperature
and humidity measurements, CO and CO2
concentrations. Humidity range 0 to 95%,
temperature range 0 to 50°C. Electrochemical
cell for CO 0 to 500ppm. NDIR cell for CO2 0 to
5,000ppm. Data logging for 48,671 data points
with interval adjustable 1s to 1h. Fitted with
RS232 interface, and software included for download, storage
and reporting. Battery or mains operation with AC adaptor.
See also Vibration Analysis on page 54, 56
ARL NGARA Environmental Noise Logger
ARL,NGARA (5690) AU
Can be configured to record all sound
continuously so noise data can be post
processed. It can provide logged data,
WAV data & alarm/triggered details.
Type 1 microphone provided.
B&K 4448 Badge Dose Meter IS Kit of 3
BK,4448-IS-3KIT (5680) AU
Kit of 3 Intrinsically safe noise dose
meters. The kit includes a NATA calibrated
4231 Type 1 calibrator. These are badge
type Dose Meters, shoulder mounted,
cable free and simultaneously measure
all parameters required by noise at work
standards. Simple two button operation.
Rechargeable battery provides several
working days of measurement.
Digital Audio Test Set comprising of NTI Digirator & NTI Digilyser
NTI,NT-DAS (5684) AU
Audio Excel Line for digital audio signals.
System including the Digilyzer and Digirator for
producing digital audio signals and analysing
those digital audio signals up to and including 5.1
surround sound. Up to 192kHz 24bit, AES3,S/PDIF,
TOSLINK & ADAT. ync input (AES3, Word Clock,
Video). Supports Dolby Digial, E, PL II, DTS.
Channel transparency check. Channel delay measurement.
NTI XL2+M2210 Sound Level Meter
NTI,XL2+M2210 MY
Sound Level Meter comes with Class 1 microphone,
acoustical analyser options and audio analyser
options. Applications in sound installations, live
sound, studio, broadcast and environmental
noise measurements. Logging all data or subsets
in selectable intervals. Recording of wav-files
(ADPCM), a new wav-file starts every 12 hours
(max. wav-file size 512 MB). Real time analyzer with frequency
resolution: 1/3 octave, 1/1 octave, wide band and frequency
range: 6.3Hz to 20kHz. Frequency weighting: A, C, Z. USB
interface with PC analysis tool.
67
Environmental & OHS
Noise & Sound Analysers cont’d.
Water Quality, pH Meters & Electrochem cont’d.
Rion NL52EX SLM with NX42RT Octave and 1/3 Analyser
Hydrolab Minisonde 5 Multiprobe Water Logger
RIO,NL52EX-NX42RT (5670) AU
HYD,MS5 (6020) AU
Type 1 Sound Level Meter, including the Octave
and 1/3 Octave measuement option NX42RT. This
meter can be used to check NC levels for compliance
checking. The instrument includes a NATA calibrated
calibrator. All data is saved to an SD card.
Minisonde 5 multiprobe water/borehole logger,
including ‘Surveyor’ data collection system
with GPS. Includes sensors for Dissolved
Oxygen (HACH LDO), Conductivity, pH, Redox
(ORP), Turbidity (Self-Cleaning), Temperature,
Depth (0 to 25m) and GPS position. Includes
the surveyor data aquisition system so no laptop is needed
for download or data collection. Includes a 25m cable.
See also E & H Field Strength Meters on page 10-11
Fluke 481 Radiation Survey Meter
FLU,481 (5580) AU
Provides exposure measurements in mR/hr to
50R/h (0.55v/hr). Detects skin-dose, deep-dose
and X-ray radiation. Measures dose & dose rate.
ISCO 6700 Series Water Sampler
ISCO,6712 (6057) AU
Advanced water sampler for fully programmed
collection. Samples are collected in up to 24
disposable plastic containers based on time,
flow, and/or parameter set points. Fitted with
NEMA 4X,6 (IP67) sealed controller featuring
an exclusive, built-in pump.
TPS 90FL-T Multi-function Water Quality Meter & Logger
HPI Cypher 5000 Digital Radiation Alert Monitor
HPI,CYPHER5000 (5583) AU
Alpha, Beta, Gamma and X-ray radiation monitor.
Meter, LED, audible indication and detachable probe.
Range 0.1 to 1,000,000 CPM; Accuracy 1% or 2 digits.
Narda 8217 Microwave Oven Survey Meter
NAR,8217 (5553) AU
For oven power measurement complete with beaker and
thermometer. Calibration frequency 2.45GHz. Measurement range
0.5 to 10mW/cm2. Battery operated.
Narda RadMan Personal RF Field Radiation Monitor
NAR,RADMAN (5557) AU
Personal monitor and leakage detector for high
frequency electromagnetic fields. Simultaneous E
and H field measurements with audible and visual
alarms. Frequency range H field 27MHz to 1GHz; E
field 1MHz to 40GHz. Operation as personal monitor
with compensation for human body absorption, or
with isotropic detection for RF leakage sensing and
simple four-level measurement using LED indicators.
TPS,90FL-T (6028) AU
Field meter and logger for water
quality measurements. Configured
with independent probes for
pH, conductivity/salinity (TDS)/
temperature, dissolved oxygen
(DO) and turbidity. Cables 5m with
probe holder and safety harness. LCD display readout with
simultaneous display of all measurements. Manual, “notepad”
storage or automated data logging for up to 1,808 sets of
readings by time and date. RS232C interface, with WinTPS
software included. Supplied with rechargeable battery, and
clip-lead for operation from a 12V source such as a car battery.
The TPS 90FL-T Multi-function Water Quality Meter
& Logger is the piece of equipment used in the Site
Monitoring Kit on page 70.
If you have any technical problems or need assitance
evaluating your work site, call our friendly technical
team today on 1800 632 652.
TPS WP-80 pH and Temperature Meter for Testing Meat
TPS,WP-80M (6002) AU
Water Quality, pH Meters & Electrochem
DKK TOA RC-24P Portable Residual Chlorine Meter
DKK,RC-31P-DP (6046) AU
Portable, direct-reading residual chlorine
meter for water analysis. Range 0~2mg/L
[ppm]. Reagent-free measurement with
electrode, 3m cable, float and sample
container for in-situ or grab-sampling.
Compatible with direct chlorination,
hypochlorite or dichloroisocyanurate dosing.
Calibration data stored in electrode with correlation with DPD
methods. Waterproof to IP67. ISO validation functions, storage of
300 measurements and RS232 printer output. Battery operated.
68
Portable hand-held meter for pH, mV and
temperature. The instrument is capable
of applying Bendalls equation to the pH
reading for Meat Standards Australia grading
requirements. Supplied with combination pH
electrode and separate temperature sensor
on 1m cables. Operating ranges 0~14pH and
-10~120ºC [automatic sensor recognition
with auto pH correction 0~100ºC]. Case water resistant to
IP67, connectors to IP65. Menu driven, with alphanumeric
display. Auto storage of time and date of last calibration
for GLP. Memory for 2400 readings of data, time and date,
for Notepad results collection, or for AutoLog with logging
intervals between 1s and 90h. Fitted with RS232C interface
and supplied with download-software, charger and solutions.
Rechargeable NiMH battery gives up to 50h operation.
1800 632 652
Environmental & OHS
Water Quality, pH Meters & Electrochem cont’d.
Light Meters, UVA/B/C Measurement cont’d.
TPS WP-88 Turbidity & Temperature Meter with 8m Cable
Yokogawa 51001 Lux Meter NATA Calibrated
TPS,WP-88 (6031) AU
YEW,51001-NATA (5607) AU
Portable hand-held turbidity and
temperature meter for field or laboratory
use. Sensor probe diameter 45mm,
with 8m cable. Turbidity ranging
0.1 to 200/2,000NTU ±1NTU with
autoselection. Temperature compensation
and sensor range 0 to 60ºC ±0.1ºC.
Case water resistant to IP67, connectors to IP65, with detachable
cable and sensor. Menu driven, with alphanumeric display.
Auto storage of time, date and results of last calibration for
GLP. RS232C interface, and memory for 150 readings of data,
time and date, for Notepad results collection, or for AutoLog
results collection with logging intervals between 1min and
24h. Rechargeable NiMH battery gives up to 50h operation.
Supplied with download-software, charger and calibration solutions.
Digital illuminance meter with NATA certification. Measuring
range from 0 to 99.9/999/9,990/99,900/999,000lux.
Accuracy <3,000lx 4% ±1 digit >3,000lx 6% ±1 digit.
Autoranging with silicon sensor. Battery operated.
Van Essen DI502 Mini-Diver Borehole Level Logger
& Barometer 20m
VAN,DI502 (6061) AU
Mini-diver borehole level logger 20m, 1cm
accuracy. Kit includes barometric logger for
atmospheric pressure compensation. Will
also log temperature. Temperature range
-20 to 80ºC. Accuracy 0.1ºC. Size 22 x
90mm. Stores 24,000 measurements per
parameter. Stainless steel housing barometric (l/c)
logger for compensation. 10 year battery life.
Weather Stations
Vaisala WXT520 Weather Station
VAI,WXT520-KIT (5885) AU
Completely solid state measurement of rainfall
to 0.1mm, rain intensity 0.1mm/hr, rainfall
duration, hail duration and intensity, barometric
pressure 600 to 1100hPa, relative humidity
0 to 100%, wind speed 0 to 60m/s, wind
direction and temperature -52 to 60°C. The instrument is logged
using a Datataker DT80M and at the a press of a button the data
can be downloaded to a memory stick. Daily summary reports
are email once per day. The system includes a stand and will run
continuously, it includes a solar panel to keep the battery charged.
See also E & H Field Strength Meters on page 10-11
Global FP111 Digital Water Velocity Meter
Hagner EC1-X Lux Meter NATA Calibrated
GLO,FP111 (6147) AU
HAG,EC1-X (5600) AU
Portable flow probe - current meter for water
velocity measurements in streams, channels and
partially filled pipes. Propeller sensor in 50mmØ
housing, fitted to telescopic handle [1.8m] with
gauging marks to 900mm depth. Digital LCD flow
meter display for instantaneous liquid velocity and
average, maximum, stopwatch or clock. Minimum
depth about 50mm. Range 0.1 to 4.5m/s ±0.05.
Digital illuminance meter with NATA
certification. measurees from 0.1~200,000
lux. Has a remote measurement head on 2m
cord. Accuracy +/- 3% of range +/- last digit.
Battery Operated.
Hioki 3423 Lux HiTester Digital Illuminance Meter
HIO,3423 MY
Manual switching and autoranging. LCD
display with 3 1/2 digits (“1999”) for five
measuring ranges to 20/200/2000lx
in 1-count steps, 20,000lx in 10-count
steps and 200,000lx in 100-count steps with accuracy +/-4%.
Response time in autorange mode 5s (2s in manual range
mode). Autozero, hold and backlight function with delay for taking
readings in low light. Input for AC power adaptor, connecting-cable
to allow separation of sensor unit and meter, and 200mVDC
analog output with cable. Battery powered.
ILI 1400ABC Radiometer for UV Measurements
ILI,1400ABC (5614) MY
International Light model 1400 radiometer
with backlit LCD display, autozero and
autoranging. Continuous reading with hold
function, or integrated “dose” measurement
up to 24h. Smart detectors with storage of
units and detector-calibration data. Analogue recorder output.
Mains adaptor or battery power. Supplied with three sensors: UV
actinic hazard (UVC with B & A components matched to OSHA
requirements), range 2.50e-7 to 2.50e-3 W/cm2 eff. UVB + A
(total “solar” radiation), range 1.16e-7 to 4.07e-1 W/cm2. UVB,
range 1.54e-6 to 1.54e-2 W/cm2
Hydrological Services Universal Current Meter OSS-B1
HYS,OSSB1 (6145) AU
Water current meter for measurement of
flow velocity in rivers, streams, channels and
open water. Robust streamlined stainless
body fitted with high precision 100mmØ fan
[flow range 0.025 to 5m/s]. Set of stainless
wading rods for depths to 3m. Rechargeable
“Hydromate” ruggedised field computer with IP65 case.
Storage of fan calibration formulae for direct readout of
volume-flow. Touch screen entry for set up, input, storage and
download. Supplied with PC download software and cable.
Watch how-to videos on any piece
of equipment displaying this symbol.
69
Oversee Your Site with Confidence
A TechRentals Site Monitoring Kit can warn you of potential problems
Discovering that your work site doesn’t meet the required standards could lead to costly liabilities. Consequences
can be exacerbated if a construction site is found to be particularly hazardous or environmentally detrimental.
Excess ground vibration, noise, dust,
and runoff pollution, are all common,
but serious considerations for those
in construction.
Monitoring work sites is an inexpensive
way to be sure that all state and
council regulations are adhered to,
while simultaneously satisfying
Corporate Social Responsibilities (CSR).
You can do this simply with a work site
monitoring kit from TechRentals.
Monitoring kit includes:
3 Ground vibration logging - Profound Vibra Ground Vibration Logger
3 Water run off analysis - TPS 90FL-T Multi-function Water Quality Meter and Logger
3 Noise logging - ARL NGARA Environmental Noise Logger
3 Dust monitoring - TSI 8533 Aerosol Monitor and Logger
1800 632 652
[email protected]
techrentals
TechRentals Business Partners
• Acoustic Research
Laboratories
• Anritsu
• EXFO
• Flir Systems
• Fluke
• Fluke Networks
• GE Druck
• Keysight Technologies
• Megger
• Testo
• Viavi
TechRentals are distributors and resellers for:
3 Anritsu
3 Viavi (formerly JDSU)
3 Megger
3 Gridsense
3 Acoustic Research Laboratories
3 Kingfisher
3 Flir
TechRentals - The perfect solution!
TechRentals vast fleet of equipment offers a range of solutions to many markets. These include
the Aviation, HVACR, Defence, Electrical, Mining, Mechanical and Telco markets. If you can’t find
the equipment you’re looking for, our international partner network gives you access to an even
larger and diverse inventory to help satisfy your requirements.
It’s important to remember that renting is much more cost effective than to purchase outright.
This enables you to preserve capital for other parts of your business. Should you need to
eventually own the assets, TechRentals offer a Rental Purchase Option. No matter your need,
we will find you the assets you require when you want them.
71
Our strength lies in our strong technical capacity and the
synergies between our various business units
Test and Measurement
TechRentals offers specialised test and measurement equipment for a wide range
of industries. Products offered encompass electrical power measurement and
analysis, general industrial applications, physical measurement, radio frequency,
environmental and OH&S, data and telecommunications, electronics and more.
The leader in the industrial rental arena for more than 40 years, TechRentals also
offers Long Term Rental (LTR) solutions and flexible purchasing options that can
be tailored to your specifications.
1800 632 652
1800 88 7368
[email protected]
[email protected]
techrentals
Radio Communications
TR Hirecom is Australia’s largest two way radio communications rental company,
and has been providing radios and systems to suit the security, events, hospitality,
construction, manufacturing, and petrochemical industries for the past 15 years.
As a Motorola Solutions Channel Partner, TR Hirecom offer the latest in digital
technology. With a choice of IS/FM/ATEX rated radios, contact us today to see
how we can tailor you a solution for just about any application.
1800 222 327
[email protected]
hirecom
Satellite Communications
TR Telecom offers a range of satellite telephony products (for rent or purchase)
from Iridium and Inmarsat, as well as prepaid and postpaid call plans.
Global satellite data solutions are also available through Iridium’s Short Burst
Data (SBD) and Inmarsat’s Broadband Global Area Network (BGAN). Please
contact our customer support team for more information, or view our full
range of satellite communications equipment at our online shop.
1300 550 014
[email protected]
telecom
www.trtelecom.com.au
Calibration, Repair & Sales
TR Calibration serves customers in defence, manufacturing, aviation, and other high
tech sectors. As a NATA accredited ISO/IEC 17025 provider of calibration services,
we offer NATA endorsed reports or non-NATA endorsed calibration documentation
depending on your requirements. Ask today about our range of booking options,
or whether our Mobile Calibration Lab can benefit you.
Authorised Service Agent for:
- Barfield Aviation - GEC Weighing Platforms
- Megger Electrical - Stahwille Torque Products
Approved Distributor for:
- GE ADTS Products
- GEC Weighing Platforms
Authorised Service Centre for: GE M&S Pressure Products including ADTS
1300 790 480
[email protected]
Australia
1800 632 652
Malaysia
603 5614 1135
New Zealand*
0800 832 473
www.techrentals.co.nz
* Distributor of TechRentals Australia

our Equipment Solutions Brochure

Transcription

Similar documents

Flu season is coming!

silly cable tech terms

www.vecsupply.com

Sat Buddy 2

SES-300-XXX-ATEX eng

ADVANTAGE 1.0

using standard probes with the tektronix 222ps oscilloscope

Amendment

Swecomex - Global Marine Systems