Product Preview SC Series Loudspeakers

SC Series Loudspeakers Product Preview
Superior Performance For The Installing Pro
The SC Series has been developed specifically for the independent
retailer, custom installer and integrator market.
They Share Cutout Sizes And Accessories with TCi/LCi for maximum
sales flexibility.
Follows TCi /LCi Cosmetics And Industrial Design as a logical
good/better/best strategy.
Designed From The Ground Up As Our Best Entry Level Product.
Same Weatherproof Hardware And Grilles As TCi
Six Models: two rectangular, four round, for virtually invisible
placement in every conceivable location.
SC65
Dynamic Balance® Polymer Composite Drivers for smooth widerange
response with low distortion.
3/4" And 1" Silk Dome Tweeters with neodymium magnets for clear,
detailed highs.
Specifications
Durable, Moisture Resistant Materials, including Butyl Rubber
surrounds, for safe use in kitchen, bath & sauna.
Model
Shape
Driver Complement
Pre-Construction
Bracket
Packing
Measure
Paintable, Powder-Coated Aluminum Grilles allow SCi Series
speakers to virtually disappear in your room!
SC50
Round 2-way
coaxial in-ceiling
loudspeaker
5 1/4" midwoofer driver
3/4" aimable silk
dome tweeter
PB SC50
each/pair
SC60
Round 2-way
in-ceiling
loudspeaker
6 1/2"midwoofer driver
3/4" aimable silk
dome tweeter
PB LC60i
each/pair
SC80-IPR
Round 2-way
in-ceiling
loudspeaker
8" midwoofer driver
1" aimable silk
dome tweeter
PB LC80i
each/pair
SC65
Rectangular
2-way in-wall
loudspeaker
6 1/2" midwoofer driver
3/4" aimable silk
dome tweeter
PB LC65i
each/pair
SC85-IPR
Rectangular 2-way
in-wall loudspeaker
8" midwoofer driver
1" aimable silk
dome tweeter
PB85
each/pair
SC6s
Dual input 2-way
in-ceiling
loudspeaker
6 1/2" dual voice coil
midwoofer driver
two 3/4" metallized
dome tweeters
PB 60
each
SCc
Center channel
in-wall
loudspeaker
Two 5 1/4" midwoofer
driver, 3/4" silk
dome tweeters
PB LCic
each
Model
Overall Freq
Response
-3dB Limits
Recommended
Amplification
Sensitivity
Nominal
Impedance
SC50
50 Hz-20 kHz
70 Hz-20 kHz
20-100 W
88 dB
8 Ohm
SC60
40 Hz-20 kHz
60 Hz-20 kHz
20-100 W
89 dB
8 Ohm
Installation Is Easy As 1-2-3 with the Rotating Cam installation system.
Pre-Construction Brackets (same brackets as TCi series SC60, SC80,
SC65) are available for all models.
We’ve Put Superior Performance
For The Installing Pro Front And Center
No other custom install series offers the sonic and brand name
performance of Polk Audio’s SC Series. And now, with the addition
of the SC-C Center Channel, the SC Series enables you to offer
your customers a complete home theater solution without
compromising the sound or the budget.
Timbre-Matched to the entire SC Series line.
3/4" And 1" Silk Dome Tweeters with neodymium magnets
for clear, detailed highs.
Wide Dispersion Design for uniform sound-coverage throughout
even large rooms.
Gold-Plated Binding Posts, the same heavy-duty terminals
used in our LSi/TCi Series.
Durable, Moisture Resistant Materials, including butyl
rubber surrounds and stainless steel hardware.
SC80-IPR
35 Hz-20 kHz
50 Hz-20 kHz
20-100 W
90 dB
8 Ohm
Infinite Baffle Tuning uses the virtual enclosure of in-wall
space for superior bass response.
SC65
32 Hz-20 kHz
60 Hz-20 kHz
20-100 W
89 dB
8 Ohm
SC85-IPR
30 Hz-20 kHz
50 Hz-20 kHz
20-100 W
90 dB
8 Ohm
Paintable, Powder-Coated Aluminum Grille
allow SC-c to virtually disappear in any room.
SC6s
40 Hz-20 kHz
55 Hz-20 kHz
20-100 W
89 dB
8 Ohm
SCc
40 Hz-20 kHz
55 Hz-20 kHz
10-100 W
91 dB
8 Ohm
Installation Is Easy As 1-2-3 with the Rotating Cam System,
securing the speaker safely with no extra assembly or mess.
Specifications, dimensions and features subject to change without notice. For more information
Pre-Construction Bracket (PBLCic) is available.
Polk Audio
5601 Metro Drive, Baltimore, MD 21215
1-800-377-7655
www.polkaudio.com
call us at 1-800-377-7655 (USA and Canada). Outside of North America call +1 (410) 358-3600.
SC Series Loudspeakers Product Preview
Flip A Switch, And They’re IP-Ready
Polk Audio’s highly acclaimed LC265i-IP and LC80i-IP set a new, higher
sonic standard for networked built-in loudspeakers. Now Polk has
extended this IP-ready technology to more moderate price ranges
with our new SC80-IPR and SC85-IPR speakers. The SC-IPR Loudspeakers
integrate seamlessly into a legacy system or a multi-room network.
Which means they represent one of the best values available in high
performance, IP-ready multi-room and home theater electronics. Both
models include standard speaker wire inputs for legacy systems as
well as a Euro-style connector input for ip use. A rocker switch allows
the installer to choose the input appropriate for the installation.
Both Loudspeakers Are IP-Ready At The Flip Of A Switch
Both models include standard speaker wire inputs for legacy systems as
well as a euro-style connector input for IP use. A rocker switch allows the
installer to choose the input appropriate for the installation.
And Both Loudspeakers Offer Real Benefits
When Used In IP-Ready Mode
The speakers operate in bi-amplified mode, with separate signals
going to the tweeter and woofer, providing a significant performance
improvement for your customer.
When installed as part of the Netstreams Digilinx system, preloaded
Digital Signal Processing (DSP) characteristics smooth the frequency
response and increase the bass performance.
SC85-IPR
Bypassing the passive crossover network creates better phase
characteristics, lower overall distortion and improved sensitivity.
Specifications, dimensions and features subject to change without notice. For more information
call us at 1-800-377-7655 (USA and Canada). Outside of North America call +1 (410) 358-3600.
SC80-IPR
Polk Audio
5601 Metro Drive, Baltimore, MD 21215
1-800-377-7655
www.polkaudio.com