Spec Sheet

Transcription

Spec Sheet
SCT2x4 PLUS
HITS Satellite to Cable Transcoder Module
PRODUCT DESCRIPTION
The SCT2x4 PLUS is a Satellite to Cable Transcoder system
designed for the HITS (Headend-in-the-Sky) satellite service.
Each SCT2x4 PLUS module contains two independently
controlled satellite tuners with input frequency ranges of
950-2150 MHz. This unit is specifically designed for 8PSK
transponders using DVB-S2 error correction. Due to the
high overall bitrate on HITS 8PSK transponders, all of the
programs contained within them cannot be accommodated
in a single QAM 256 channel. The SCT2x4 PLUS automatically
directs programs across two QAM channels based upon the
transponder selection. SAT 1’s programs are directed to QAM1
and QAM 2 while SAT 2’s programs are directed to QAM3 and
QAM 4. The four (4) output QAM channels can be grouped in
any 42 MHz contiguous bandwidth in the frequency range of
54-864 MHz.
The SCT2x4 PLUS does not alter the satellite encryption used on
the program streams. The encrypted streams pass intact through
the transcoder and are delivered to the QAM set top boxes
where the actual descrambling occurs. The SCT2x4 PLUS may
be monitored and controlled via GUI-based web pages from any
computer locally or via the internet.
FEATURES & BENEFITS
• Supports HITS 8PSK transponders with DVB-S2 FEC
• Equipped with an integrated automatic satellite switch that allows
operator to select inputs from 2 different satellites
• Supports ITU-T J.83B QAM 256 output
• Compact design allows for deployment of 4 transcoder modules (8
transponders/16 QAM), including the power & control module, in 3RU
• GUI-based menu, including SNMP-based management, provides
remote monitoring/control capabilities
Item #
Description
SCT2x4 PLUS
PSM-4
QTRC
1002655
1002656
6233A
Satellite to Cable Transcoder Module
Power Supply Module for SCT2x4 PLUS
Rack Mount, holds (4) SCT2x4 PLUS + (1) PSM-4
© Copyright 2016 R.L. Drake Holdings, LLC.
All rights reserved.
PSM-4
Model
TECHNICAL DATA & SPECIFICATIONS
SCT2x4 PLUS (1002655) Satellite to Cable Transcoder Module
INPUT (Specifications are per SCT2x4 PLUS)
OUTPUT (Specifications are per SCT2x4 PLUS)
Connector:
2x “F” Female
Connector:
1x “F” Female (4x RF QAM channels combined)
Standards:
8PSK (DVB-S2)
Modulation:
QAM 256
Symbol Rate:
30 MSymbols/sec (Mbaud)
Standard:
ITU-T J.83B
Frequency Range:
950 to 2150 MHz
DVB Symbol Rate:
5.361 MSymbol/sec (MBaud)
Frequency
Granularity:
1 MHz
Frequency Range:
54 to 864 MHz
Bandwidth:
36 MHz
Tuning:
CATV Channel Selectable (CH. 2 to 135)
Capture Range:
± 5 MHz
Channels’ Bandwidth:
4x 6 MHz in any 42 MHz-wide spectrum
Code Rate:
Auto Detect; 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
RF Level:
+40 dBmV ±1 dB
Forward Error
Correction (FEC):
RF Level Adjustment Range:
+32 to +42 dBmV, 1 dB increment
DVB-S2
Frequency Tolerance:
± 0.5 kHz @ 77°F (25° C)
Input Level:
-65 to -20 dBm
Frequency Stability:
± 5 kHz over 32° to 122° F (0 to 50° C)
Impedance:
75 Ω
Amplitude Flatness:
± 0.25 dB (over 6 MHz channel)
Return Loss
Greater than 9 dB
Phase Noise:
-95 dBc (@ 10 kHz)
Spurious:
-60 dBc
Broadband Noise:
-70 dBc (@ +40 dBmV output level, 5.5 MHz
bandwidth)
Impedance:
75 Ω
Carrier Suppression:
45 dB
Return Loss:
14 dB typical
Signal-to-Noise Ratio (SNR):
Greater than 40 dB typical
MER:
Greater than 39 dB typical
I/Q Phase Error:
Less than 1 degree
I/Q Amplitude Imbalance:
Less than 1%
GENERAL (Specifications are per module or chassis)
SCT2x4 PLUS Module: 3.0 x 10.6 x 5.25 inches (38 x 270 x 134 mm)
PSM-4 Power Supply Module: 4.5 x 10.6 x 5.25 inches (114 x 270 x 134 mm)
QTRC Rack Chassis: 19 x 12.0 x 5.25 inches (483 x 305 x 134 mm)
Dimensions (W x D x H):
Power:
105 to 240 VAC; 50/60 Hz
Power Dissipation:
PSM-4 with one(1) SCT2x4 PLUS Module: 33 W
SCT2x4 PLUS Module: 1.7 lbs (0.77 kg)
Fully-loaded Rack Chassis: 28 lbs (12.7 kg)
Weight:
Operating Temperature:
32 to 122 °F (0 to 50 °C)
Storage Temperature:
-13 to 158 °F (-25 to 70 °C)
Operating Humidity:
0 to 95% RH @ 35 °C max, non-condensing
Storage Humidity:
0 to 95% RH @ 35 °C max, non-condensing
ALARMS/MONITORING/CONTROL (Specifications are per module)
SCT2x4 PLUS Module: Status (Green LED)
PSM-4 Power Supply Module: Power (Green LED)
Status (Bi-Color Green/Red LED)
Indicators:
Remote Monitoring/Control:
GUI-based Menu via web browser
R.L. DRAKE HOLDINGS, LLC
• Sales: 937-746-4556 • Support: 937-746-6990 • Fax: 937-806-1510 • www.rldrake.com
Rev. No: 052616
Specifications are subject to change without notice or obligation.