Rider work 2.cdr

Technical Rider
The band:
Andrei Apanovich
Vasil Varabeichykau
Aleh Klimchanka
Pavel Alenchyk
Mikola Sharangovich
Andrei Harchakou
-
vox, bagpipe
bagpipe, flute, vox
bass
guitar, vox
drums
keyboards, vox
Main amplification
1. PA Dynacord, EV, JBL, Turbosound. 10kW RMS or more.
2. FOH-mixer - Midas, Soundcraft, Allen&Heath (ML Series) 32 ch, 10 aux, full parametric EQ
per ch.
3. Monitor Lines - Dynacord, EV, JBL, Turbosound. 250W RMS per monitor or more:
 2 monitor vox, bagpipe
 2 monitors bagpipe, flute, vox
 2 monitors - drummer
 1 monitor guitar, vox
 1 monitor bass
 1 monitor keyboard, vox
 monitors though stage
4. Stage plan see page 2.
Back line
1. Drums: not more low a class than “Tama Superstar”, “Yamaha Studio Custom”, "DW",
“Sonor 3005”. It consists of: bass drum 22', tom 12', tom 13', floor tom 16', hi-hat stand, 4 boom
cymbal stands, snare drum stand, regulable drum throne. Under drums necessarily there
should be a rug against sliding.
2. Bass amplifier: Ampeg, Mesa Boogie, Hartke. Output: 300W or more.
3. Hi-Gain Guitar amplifier: Mesa Boogie Dual/Triple Rectifier, Marshall DSL/TSL, Peavey,
ENGL with foot-switch. Output 100W or more.
4. Keyboards: DI-box for keyboards, 1 stand for mic, 1 mic (Shure, Sennheizer, ElectroVoice).
5. Vocals, bagpipe, ac. guitar: 1 stand for mic, 1 mic (Shure, Sennheizer, ElectroVoice). DI-box
for ac. guitar, DI-box for bagpipe.
6. Bagpipe, flute: 1 stand for mic, 1 mic (Shure, Sennheizer, ElectroVoice) for flute. DI-box for
bagpipe.
7. 220V AC feeding points: all stage equipment must be secure and must be grounded.
Voltage: 220 +-10 V; AC frequency: 50-60 Hz.
 keyboards 1 point.
 guitar 1 point.
Soundcheck will be lasted one hour!