Re-tuning: HUMAX Freeview Recorders
Transcription
Re-tuning: HUMAX Freeview Recorders
Re-tuning: HUMAX Freeview Recorders 12 Steps (Steps 1-5) This guide can be used to help you re-tune any of the following products with the remote control below: Digital television recorders: PVR-9200T, PVR-9150T, PVR-9300T *Make sure your box is on and press 80 for the BBC News channel 1) Press the Menu button 2) Use the down arrow button to select Installation on the fourth line of the menu and press OK button 3) Press the zero key four times or enter your own passcode if you have changed it and press OK button 4) Select Default Setting on the fourth line of the menu and press OK button The message ‘All setting values will be returned to the initial values’ will appear 5) Don’t worry! Using the arrow buttons select Yes and press OK button Manufacturer Helpline: 0844 669 8800 email: [email protected] Page 1 of 3 Re-tuning: HUMAX Freeview Recorders 6) 12 Steps (Steps 6-10) Press the zero key four times or enter your own passcode if you have changed it and press OK button 7) An initialising message will appear No action required 8) A loading screen will appear No action required 9) A searching screen will appear No action required 10) When the search has completed select Save and press OK Manufacturer Helpline: 0844 669 8800 email: [email protected] Page 2 of 3 Re-tuning: HUMAX Freeview Recorders 12 Steps (Steps 11-12) 11) Saving screen No action required 12) BBC1 will automatically play out No action required You have completed the procedure and can continue viewing the digital channels. Manufacturer Helpline: 0844 669 8800 email: [email protected] Page 3 of 3