Gravity Conveyor Catalog

Transcription

Gravity
Conveyors
Conveyors
Gravity Conveyors
Gravity Skatewheel Conveyor ........................................ 124
Gravity Skatewheel Curve Conveyor ............................ 126
Gravity Skatewheel Spur Conveyor .............................. 128
Ball Transfer Table ............................................................ 129
Gravity Roller Conveyor .................................................. 130
Gravity Roller Curve Conveyor ...................................... 131
Gravity Roller Conveyor .................................................. 132
Gravity Rollers .................................................................. 139
Flow Rail ............................................................................ 140
Pallet Rail ........................................................................... 140
Conveyor Supports .......................................................... 141
- 123 -
(989) 358-7000
Gravity Skatewheel Conveyor
Gravity Skatewheel Conveyor is uniquely designed to
convey lightweight packages or for use in operations
requiring lightweight moveable sections.
■ 6 Widths
■ Steel or Aluminum Frames
■ Wheels High or Low
■ Axles on 1 1/2 in., 3 in. or 4 in. Centers
OVERALL FRAME WIDTH
OVERALL FRAME WIDTH
1"
BETWEEN FRAME WIDTH
1"
3/8"
BETWEEN FRAME WIDTH
1 1/8"
4"
2 1/2"
CENTER SUPPORT BAR
BOLT-IN CROSS MEMBER
CENTER SUPPORT BAR
AXLE SPACER
AXLE SPACER
WHEELS LOW
WHEELS HIGH
5' OR 10' OVERALL LENGTH
1 9/16"
Gravity Conveyors
COUPLING ROD
GRAVITY
HOOK
LOAD CAPACITY CHART
Frame Support
Material Centers
Steel
Aluminum
5'
10'
5'
10'
Frame Capacity Wheel Capacity
Max. Uniformly
Max. Static
Distributed Load Load Per Wheel
1300
65
350
710
50
160
Note: Frame capacities shown are for 2 1/2 in. deep frames only.
Standard Specifications:
Frame - 2 1/2 in. deep x 1 in. flange x 12 ga. galvanized steel or
1/8 in. aluminum channel with bolt-in cross members spaced
every 2 ft. Also available - economy lite line with 14 ga. channel
frames. 4 in. deep channel frames for rollers low.
Lengths - 5 ft. and 10 ft. straight sections. Special lengths also
available.
Widths - 12 in., 15 in., 18 in., 21 in., 24 in. and 30 in. overall.
Wheels - 1 15/16 in. dia. - ball bearings run in hardened raceway
with lifetime lubrication. Corrosion-resistant aluminum, zinc coated
steel, black plastic or white plastic also available.
Couplings - Gravity hooks on one end - rod on opposite end. All
couplings are bolted to frame. Bolt-in end couplers also available.
Axles - 1/4 in. dia. threaded one end with locknut. Spaced on
1 1/2 in., 3 in. or 4 in. centers. Spacers are zinc coated steel.
- 124 -
(989) 358-7000
12" OVERALL WIDTH
WT. (LBS.)
WPF
10'
5'
WSHS1.5 - 12 - 12
12
86
44
WSHS1.5 - 12 - 16
16
92
47
WSHS1.5 - 12 - 20
20
99
50
WSHS1.5 - 12 - 24
24
106
54
WSHS1.5 - 12 - 32
32
120
61
21" OVERALL WIDTH
WT. (LBS.)
MODEL NO.
WPF
10'
5'
WSHS1.5 - 21 - 24
24
128
66
WSHS1.5 - 21 - 28
28
135
69
WSHS1.5 - 21 - 32
32
142
72
WSHS1.5 - 21 - 40
40
155
79
WSHS1.5 - 21 - 48
48
169
86
WT. (LBS.)
10'
5'
WSHS1.5 - 15 - 12
12
93
48
WSHS1.5 - 15 - 16
16
100
51
WSHS1.5 - 15 - 20
20
107
54
WSHS1.5 - 15 - 24
24
113
58
WSHS1.5 - 15 - 32
32
127
65
24" OVERALL WIDTH
WT. (LBS.)
MODEL NO.
WPF
10'
5'
WSHS1.5 - 24 - 32
32
153
78
WSHS1.5 - 24 - 36
36
160
82
WSHS1.5 - 24 - 40
40
167
85
WSHS1.5 - 24 - 48
48
181
92
WSHS1.5 - 24 - 56
56
194
99
12" OVERALL WIDTH
WT. (LBS.)
WPF
10'
5'
WSHS3 - 12 - 6
6
66
34
WSHS3 - 12 - 8
8
69
35
WSHS3 - 12 - 10
10
72
37
WSHS3 - 12 - 12
12
76
39
WSHS3 - 12 - 16
16
83
42
21" OVERALL WIDTH
WT. (LBS.)
MODEL NO.
WPF
10'
5'
WSHS3 - 21 - 12
12
90
47
WSHS3 - 21 - 14
14
94
48
WSHS3 - 21 - 16
16
97
50
WSHS3 - 21 - 20
20
104
53
WSHS3 - 21 - 24
24
111
57
WT. (LBS.)
10'
5'
WSHS3 - 15 - 6
6
70
36
WSHS3 - 15 - 8
8
74
38
WSHS3 - 15 - 10
10
77
40
WSHS3 - 15 - 12
12
81
41
WSHS3 - 15 - 16
16
87
45
24" OVERALL WIDTH
WT. (LBS.)
MODEL NO.
WPF
10'
5'
WSHS3 - 24 - 16
16
106
55
WSHS3 - 24 - 18
18
109
56
WSHS3 - 24 - 20
20
113
58
WSHS3 - 24 - 24
24
120
62
WSHS3 - 24 - 28
28
126
65
MODEL NO.
S
T
E
E
L
MODEL NO.
15" OVERALL WIDTH
MODEL NO.
WT. (LBS.)
10'
5'
WSHS4 - 12 - 4
4
60
31
WSHS4 - 12 - 6
6
63
32
WSHS4 - 12 - 8
8
67
34
WSHS4 - 12 - 9
9
68
35
WSHS4 - 12 - 12
12
73
38
21" OVERALL WIDTH
WT. (LBS.)
MODEL NO.
WPF
10'
5'
WSHS4 - 21 - 9
9
81
42
WSHS4 - 21 - 11
11
84
44
WSHS4 - 21 - 12
12
86
44
WSHS4 - 21 - 15
15
91
47
WSHS4 - 21 - 18
18
96
50
WPF
18" OVERALL WIDTH
MODEL NO.
WSHS1.5
WSHS1.5
WSHS1.5
WSHS1.5
WSHS1.5
WPF
WPF
WSHS1.5-30-32
WSHS1.5-30-40
WSHS1.5-30-48
WSHS1.5-30-56
WSHS1.5-30-72
32
40
48
56
72
WT. (LBS.)
10'
5'
WSHS4 - 15 - 4
4
64
33
WSHS4 - 15 - 6
6
67
35
WSHS4 - 15 - 8
8
71
36
WSHS4 - 15 - 9
9
72
37
WSHS4 - 15 - 12
12
77
40
24" OVERALL WIDTH
WT. (LBS.)
MODEL NO.
WPF
10'
5'
WSHS4 - 24 - 12
12
94
49
WSHS4 - 24 - 14
14
89
51
WSHS4 - 24 - 15
15
99
51
WSHS4 - 24 - 18
18
104
54
WSHS4 - 24 - 21
21
110
57
WPF
WT. (LBS.)
10'
5'
121
62
128
65
134
68
141
72
148
75
WT. (LBS.)
10'
5'
172
88
186
95
200
102
213
109
240
122
1 1/2 IN.
AXLE
SPACING
18" OVERALL WIDTH
MODEL NO.
WSHS3
WSHS3
WSHS3
WSHS3
WSHS3
-
WPF
18 - 12
12
18 - 14
14
18 - 16
16
18 - 18
18
18 - 20
20
30" OVERALL WIDTH
MODEL NO.
WSHS3
WSHS3
WSHS3
WSHS3
WSHS3
-
15" OVERALL WIDTH
MODEL NO.
WPF
- 18 - 24
24
- 18 - 28
28
- 18 - 32
32
- 18 - 36
36
- 18 - 40
40
30" OVERALL WIDTH
MODEL NO.
15" OVERALL WIDTH
MODEL NO.
12" OVERALL WIDTH
MODEL NO.
WPF
30
30
30
30
30
-
WPF
16
20
24
28
36
16
20
24
28
36
WT. (LBS.)
10'
5'
85
44
89
46
92
47
96
49
99
51
WT. (LBS.)
10'
5'
120
62
127
65
134
69
140
72
154
79
3 IN.
AXLE
SPACING
18" OVERALL WIDTH
MODEL NO.
WSHS4
WSHS4
WSHS4
WSHS4
WSHS4
-
WPF
18 - 9
9
18 - 11
11
18 - 12
12
18 - 14
14
18 - 15
15
30" OVERALL WIDTH
MODEL NO.
WSHS4
WSHS4
WSHS4
WSHS4
WSHS4
-
30
30
30
30
30
-
WPF
12
15
18
21
27
12
15
18
21
27
WT. (LBS.)
10'
5'
77
40
80
41
82
42
85
44
87
45
WT. (LBS.)
10'
5'
107
56
112
58
117
61
122
63
132
68
4 IN.
AXLE
SPACING
Note: Weights listed are for 2 1/2 in. deep frames. For 4 in. deep frames, add 6 lbs. to 5' long sections and 12 lbs. to 10' long sections.
In Stock
A
L
U
M
I
N
U
M
WAHS1.5
WAHS1.5
WAHS1.5
WAHS1.5
WAHS1.5
12" OVERALL WIDTH
WT. (LBS.)
WPF
10'
5'
WAHS3 - 12 - 6
6
34
17
WAHS3 - 12 - 8
8
36
18
WAHS3 - 12 - 10
10
38
20
WAHS3 - 12 - 12
12
41
23
WAHS3 - 12 - 16
16
46
23
21" OVERALL WIDTH
WT. (LBS.)
MODEL NO.
WPF
10'
5'
WAHS3 - 21 - 12
12
52
27
WAHS3 - 21 - 14
14
54
28
WAHS3 - 21 - 16
16
56
29
WAHS3 - 21 - 20
20
61
31
WAHS3 - 21 - 24
24
66
34
WT. (LBS.)
10'
5'
WAHS3 - 15 - 6
6
37
19
WAHS3 - 15 - 8
8
40
20
WAHS3 - 15 - 10
10
42
22
WAHS3 - 15 - 12
12
45
23
WAHS3 - 15 - 16
16
49
25
24" OVERALL WIDTH
WT. (LBS.)
MODEL NO.
WPF
10'
5'
WAHS3 - 24 - 16
16
62
32
WAHS3 - 24 - 18
18
64
33
WAHS3 - 24 - 20
20
66
34
WAHS3 - 24 - 24
24
71
36
WAHS3 - 24 - 28
28
76
39
MODEL NO.
12" OVERALL WIDTH
WT. (LBS.)
WPF
10'
5'
12 - 4
4
29
15
12 - 6
6
31
16
12 - 8
8
34
17
12 - 9
9
35
18
12 - 12
12
38
20
21" OVERALL WIDTH
MODEL NO.
WAHS4
WAHS4
WAHS4
WAHS4
WAHS4
-
MODEL NO.
WAHS4
WAHS4
WAHS4
WAHS4
WAHS4
-
21
21
21
21
21
-
WPF
9
11
12
15
18
9
11
12
15
18
WT. (LBS.)
10'
5'
44
23
46
24
47
24
51
26
54
28
15" OVERALL WIDTH
WT. (LBS.)
10'
5'
15 - 12
12
57
29
15 - 16
16
62
31
15 - 20
20
66
34
15 - 24
24
71
36
15 - 32
32
81
41
24" OVERALL WIDTH
WT. (LBS.)
NO.
WPF
10'
5'
24 - 32
32
101
51
24 - 36
36
105
53
24 - 40
40
110
56
24 - 48
48
119
60
24 - 56
56
129
65
MODEL NO.
WAHS1.5
WAHS1.5
WAHS1.5
WAHS1.5
WAHS1.5
-
MODEL
-
WPF
18" OVERALL WIDTH
MODEL NO.
WAHS1.5
WAHS1.5
WAHS1.5
WAHS1.5
WAHS1.5
MODEL NO.
WPF
WAHS1.5-30-32
WAHS1.5-30-40
WAHS1.5-30-48
WAHS1.5-30-56
WAHS1.5-30-72
32
40
48
56
72
15" OVERALL WIDTH
MODEL NO.
WPF
15" OVERALL WIDTH
WT. (LBS.)
WPF
10'
5'
15 - 4
4
32
16
15 - 6
6
34
18
15 - 8
8
37
19
15 - 9
9
38
19
15 - 12
12
41
21
24" OVERALL WIDTH
MODEL NO.
WAHS4
WAHS4
WAHS4
WAHS4
WAHS4
-
MODEL NO.
WAHS4
WAHS4
WAHS4
WAHS4
WAHS4
-
24
24
24
24
24
-
12
14
15
18
21
WPF
12
14
15
18
21
WT. (LBS.)
10'
5'
52
27
54
28
55
29
59
30
62
32
WPF
- 18 - 24
24
- 18 - 28
28
- 18 - 32
32
- 18 - 36
36
- 18 - 40
40
30" OVERALL WIDTH
WT. (LBS.)
10'
5'
77
39
82
42
87
44
91
46
96
49
WT. (LBS.)
10'
5'
115
58
124
63
133
68
143
72
162
82
1 1/2 IN.
AXLE
SPACING
18" OVERALL WIDTH
MODEL NO.
WAHS3
WAHS3
WAHS3
WAHS3
WAHS3
-
WPF
18 - 12
12
18 - 14
14
18 - 16
16
18 - 18
18
18 - 20
20
30" OVERALL WIDTH
MODEL NO.
WAHS3
WAHS3
WAHS3
WAHS3
WAHS3
-
30
30
30
30
30
-
WPF
16
20
24
28
36
16
20
24
28
36
WT. (LBS.)
10'
5'
48
25
50
26
53
27
55
28
58
29
WT. (LBS.)
10'
5'
70
36
75
38
80
41
84
43
94
45
3 IN.
AXLE
SPACING
18" OVERALL WIDTH
MODEL NO.
WAHS4
WAHS4
WAHS4
WAHS4
WAHS4
-
WPF
18 - 9
9
18 - 11
11
18 - 12
12
18 - 14
14
18 - 15
15
30" OVERALL WIDTH
MODEL NO.
WAHS4
WAHS4
WAHS4
WAHS4
WAHS4
-
30
30
30
30
30
-
WPF
12
15
18
21
27
12
15
18
21
27
WT. (LBS.)
10'
5'
41
21
43
22
44
23
47
24
48
25
WT. (LBS.)
10'
5'
59
31
63
32
66
34
70
36
77
39
4 IN.
AXLE
SPACING
Note: Weights listed are for 2 1/2 in. deep frames. For 4 in. deep frames, add 2 1/2 lbs. to 5' long sections and 5 lbs. to 10' long sections.
In Stock
- 125 -
(989) 358-7000
Gravity Conveyors
12" OVERALL WIDTH
WT. (LBS.)
WPF
10'
5'
WAHS1.5 - 12 - 12
12
51
26
WAHS1.5 - 12 - 16
16
55
28
WAHS1.5 - 12 - 20
20
60
30
WAHS1.5 - 12 - 24
24
65
33
WAHS1.5 - 12 - 32
32
74
38
21" OVERALL WIDTH
WT. (LBS.)
MODEL NO.
WPF
10'
5'
WAHS1.5 - 21 - 24
24
83
42
WAHS1.5 - 21 - 28
28
88
45
WAHS1.5 - 21 - 32
32
93
47
WAHS1.5 - 21 - 40
40
102
52
WAHS1.5 - 21 - 48
48
112
57
MODEL NO.
Gravity Skatewheel Curve Conveyor
Skatewheel Curves are compatible with straight
sections, providing flexibility to your conveyor line.
Differential action of the wheels insure proper
orientation of packages.
■ 6 Widths
■ 45° and 90° Curves
■ Gravity Hooks and Rods on Both Ends
OVERALL FRAME WIDTH
OVERALL FRAME WIDTH
1"
1"
BETWEEN FRAME WIDTH
3/8"
BETWEEN FRAME WIDTH
1 1/8"
4"
2 1/2"
CENTER SUPPORT BAR
CENTER SUPPORT BAR
WHEELS LOW
TS
INSID
OU
E RA
DIU
S
IDE
RA
DIU
S
WHEELS HIGH
Gravity Conveyors
AXLE SPACER
AXLE SPACER
Overall Width
Inside Radius
Outside Radius
12"
15"
18"
36"
33"
30"
48"
48"
48"
21"
24"
30"
39"
36"
30"
60"
60"
60"
Frame -2 1/2 in. deep x 1 in. flange x 12 ga. galvanized steel
or 1/8 in. aluminum channel with bolt-in cross members. 4 in.
deep channel frames for wheels low.
Widths - 12 in., 15 in., 18 in., 21 in., 24 in. or 30 in. overall.
1 1/2 in. or 3 in. equivalent spacing. Spacers are zinc coated steel.
Curves - 45° and 90°; 48 in. outside radius - 12 in., 15 in. and
18 in. widths; 60 in. outside radius - 21 in., 24 in. and 30 in.
widths.
Capacity - Same “Per Foot” capacity as straight sections.
Couplings - Gravity hooks and rods on both ends of curve.
Bolt-in end couplers also available.
- 126 -
(989) 358-7000
12" OVERALL WIDTH
WT. (LBS.)
WPF
(EQUIV)
90°
45°
WSHC1.5 - 12 - 12
12
48
24
WSHC1.5 - 12 - 16
16
52
25
WSHC1.5 - 12 - 20
20
55
27
WSHC1.5 - 12 - 24
24
59
29
WSHC1.5 - 12 - 32
32
66
32
21" OVERALL WIDTH
WPF
WT. (LBS.)
MODEL NO.
(EQUIV)
90°
45°
WSHC1.5 - 21 - 24
24
88
46
WSHC1.5 - 21 - 28
28
93
48
WSHC1.5 - 21 - 32
32
96
50
WSHC1.5 - 21 - 40
40
106
55
WSHC1.5 - 21 - 48
48
115
59
15" OVERALL WIDTH
WPF
WT. (LBS.)
(EQUIV)
90°
45°
WSHC1.5 - 15 - 12
12
52
25
WSHC1.5 - 15 - 16
16
55
27
WSHC1.5 - 15 - 20
20
59
29
WSHC1.5 - 15 - 24
24
62
31
WSHC1.5 - 15 - 32
32
70
34
24" OVERALL WIDTH
WPF
WT. (LBS.)
MODEL NO.
(EQUIV)
90°
45°
WSHC1.5 - 24 - 32
32
105
54
WSHC1.5 - 24 - 36
36
109
56
WSHC1.5 - 24 - 40
40
113
58
WSHC1.5 - 24 - 48
48
122
63
WSHC1.5 - 24 - 56
56
131
67
18" OVERALL WIDTH
WPF
WT. (LBS.)
(EQUIV)
90°
45°
WSHC1.5 - 18 - 24
24
66
32
WSHC1.5 - 18 - 28
28
70
34
WSHC1.5 - 18 - 32
32
74
36
WSHC1.5 - 18 - 36
36
77
37
WSHC1.5 - 18 - 40
40
81
39
30" OVERALL WIDTH
WPF
WT. (LBS.)
MODEL NO.
(EQUIV)
90°
45°
WSHC1.5-30-32
32
117
60
WSHC1.5-30-40
40
126
65
WSHC1.5-30-48
48
134
69
WSHC1.5-30-56
56
143
74
WSHC1.5-30-72
72
161
83
1 1/2 IN.
EQUIV.
AXLE
SPACING
12" OVERALL WIDTH
WPF
WT. (LBS.)
(EQUIV)
90°
45°
WSHC3 - 12 - 6
6
38
19
WSHC3 - 12 - 8
8
39
19
WSHC3 - 12 - 10
10
41
20
WSHC3 - 12 - 12
12
43
21
WSHC3 - 12 - 16
16
47
23
21" OVERALL WIDTH
WT. (LBS.)
WPF
MODEL NO.
(EQUIV)
90°
45°
WSHC3 - 21 - 12
12
64
33
WSHC3 - 21 - 14
14
66
34
WSHC3 - 21 - 16
16
68
36
WSHC3 - 21 - 20
20
72
38
WSHC3 - 21 - 24
24
77
40
15" OVERALL WIDTH
WT (LBS)
WPF
(EQUIV)
90°
45°
WSHC3 - 15 - 6
6
40
20
WSHC3 - 15 - 8
8
41
21
WSHC3 - 15 - 10
10
43
22
WSHC3 - 15 - 12
12
45
23
WSHC3 - 15 - 16
16
49
24
24" OVERALL WIDTH
WT. (LBS.)
WPF
MODEL NO.
(EQUIV)
90°
45°
WSHC3 - 24 - 16
16
74
39
WSHC3 - 24 - 18
18
76
40
WSHC3 - 24 - 20
20
78
41
WSHC3 - 24 - 24
24
83
43
WSHC3 - 24 - 28
28
87
45
18" OVERALL WIDTH
WPF
WT. (LBS.)
(EQUIV)
90°
45°
WSHC3 - 18 - 12
12
48
23
WSHC3 - 18 - 14
14
50
24
WSHC3 - 18 - 16
16
51
25
WSHC3 - 18 - 18
18
53
26
WSHC3 - 18 - 20
20
55
27
30" OVERALL WIDTH
WT. (LBS.)
WPF
MODEL NO.
(EQUIV)
90°
45°
WSHC3 - 30 - 16
16
83
43
WSHC3 - 30 - 20
20
87
46
WSHC3 - 30 - 24
24
91
48
WSHC3 - 30 - 28
28
96
50
WSHC3 - 30 - 36
36
105
54
3 IN.
EQUIV.
AXLE
SPACING
MODEL NO.
S
T
E
E
L
MODEL NO.
MODEL NO.
MODEL NO.
MODEL NO.
MODEL NO.
Note: Weights listed are for 2 1/2 in. deep frames. For 4 in. deep frames, add 3 lbs. to 45° sections and 6 lbs. to 90° sections.
In Stock
12" OVERALL WIDTH
WT. (LBS.)
WPF
(EQUIV)
90°
45°
WAHC1.5 - 12 - 12
12
28
14
WAHC1.5 - 12 - 16
16
30
15
WAHC1.5 - 12 - 20
20
33
16
WAHC1.5 - 12 - 24
24
35
17
WAHC1.5 - 12 - 32
32
40
19
21" OVERALL WIDTH
WT. (LBS.)
WPF
MODEL NO.
(EQUIV)
90°
45°
WAHC1.5 - 21 - 24
24
57
29
WAHC1.5 - 21 - 28
28
60
31
WAHC1.5 - 21 - 32
32
62
32
WAHC1.5 - 21 - 40
40
69
35
WAHC1.5 - 21 - 48
48
75
38
15" OVERALL WIDTH
WT. (LBS.)
WPF
(EQUIV)
90°
45°
WAHC1.5 - 15 - 12
12
31
15
WAHC1.5 - 15 - 16
16
34
16
WAHC1.5 - 15 - 20
20
36
18
WAHC1.5 - 15 - 24
24
39
19
WAHC1.5 - 15 - 32
32
44
21
24" OVERALL WIDTH
WT. (LBS.)
WPF
MODEL NO.
(EQUIV)
90°
45°
WAHC1.5 - 24 - 32
32
68
35
WAHC1.5 - 24 - 36
36
71
36
WAHC1.5 - 24 - 40
40
74
38
WAHC1.5 - 24 - 48
48
80
41
WAHC1.5 - 24 - 56
56
86
44
18" OVERALL WIDTH
WT. (LBS.)
WPF
(EQUIV)
90°
45°
WAHC1.5 - 18 - 24
24
42
20
WAHC1.5 - 18 - 28
28
44
22
WAHC1.5 - 18 - 32
32
47
23
WAHC1.5 - 18 - 36
36
49
24
WAHC1.5 - 18 - 40
40
52
25
30" OVERALL WIDTH
WT. (LBS.)
WPF
MODEL NO.
(EQUIV)
90°
45°
WAHC1.5-30-32
32
77
39
WAHC1.5-30-40
40
83
42
WAHC1.5-30-48
48
89
46
WAHC1.5-30-56
56
95
49
WAHC1.5-30-72
72
108
55
12" OVERALL WIDTH
WT. (LBS.)
.
WPF
MODEL NO.
(EQUIV)
90°
45°
WAHC3 - 12 - 6
6
19
9
WAHC3 - 12 - 8
8
20
10
WAHC3 - 12 - 10
10
22
11
WAHC3 - 12 - 12
12
23
11
WAHC3 - 12 - 16
16
25
12
21" OVERALL WIDTH
WT. (LBS.)
WPF
MODEL NO.
(EQUIV)
90°
45°
WAHC3 - 21 - 12
12
36
19
WAHC3 - 21 - 14
14
37
20
WAHC3 - 21 - 16
16
39
21
WAHC3 - 21 - 20
20
42
22
WAHC3 - 21 - 24
24
45
23
15" OVERALL WIDTH
WT. (LBS.)
WPF
(EQUIV)
90°
45°
WAHC3 - 15 - 6
6
21
10
WAHC3 - 15 - 8
8
22
11
WAHC3 - 15 - 10
10
23
12
WAHC3 - 15 - 12
12
25
12
WAHC3 - 15 - 16
16
27
13
24" OVERALL WIDTH
WT. (LBS.)
WPF
MODEL NO.
(EQUIV)
90°
45°
WAHC3 - 24 - 16
16
46
24
WAHC3 - 24 - 18
18
48
25
WAHC3 - 24 - 20
20
49
26
WAHC3 - 24 - 24
24
53
27
WAHC3 - 24 - 28
28
56
29
18" OVERALL WIDTH
.
WPF
MODEL NO.
(EQUIV)
WAHC3 - 18 - 12
12
WAHC3 - 18 - 14
14
WAHC3 - 18 - 16
16
WAHC3 - 18 - 18
18
WAHC3 - 18 - 20
20
30" OVERALL WIDTH
WPF
MODEL NO.
(EQUIV)
MODEL NO.
A
L
U
M
I
N
U
M
MODEL NO.
MODEL NO.
MODEL NO.
-
30
30
30
30
30
-
16
20
24
28
36
16
20
24
28
36
WT. (LBS.)
90°
45°
48
25
51
27
54
28
57
30
64
33
3 IN.
EQUIV.
AXLE
SPACING
Gravity Conveyors
WAHC3
WAHC3
WAHC3
WAHC3
WAHC3
WT. (LBS.)
90°
45°
27
13
28
14
29
14
30
15
32
15
1 1/2 IN.
EQUIV.
AXLE
SPACING
Note: Weights listed are for 2 1/2 in. deep frames. For 4 in. deep frames, add 1 lb. to 45° sections and 2 lbs. to 90° sections.
In Stock
- 127 -
(989) 358-7000
Gravity Skatewheel Spur Conveyor
Skatewheel Spurs are used to transport products
from one conveying line onto another. They are
suitable for merging or diverging applications.
Overall
Frame
Width
12"
15"
18"
21"
24"
30"
Model
Number
45° Spur
“B”
“A” Weights (Lbs.)
2'
3'
5'
WSHR3-12-"A"-45 20 3/4"
WSHR3-15-"A"-45
25"
WSHR3-18-"A"-45 29 1/4"
WSHR3-21-"A"-45 33 1/2"
WSHR3-24-"A"-45 37 3/4"
WSHR3-30-"A"-45 46 3/16"
31
34
38
41
44
50
39
43
47
52
57
67
56
62
66
80
83
99
90° Spur
Model
Number
“B”
“R”
“A”
Weight
Lbs.
WSHR3-12-0-90
WSHR3-15-0-90
WSHR3-18-0-90
WSHR3-21-0-90
WSHR3-24-0-90
WSHR3-30-0-90
34 13/16"
38 1/16"
40 3/4"
49"
51 3/8"
55 1/2"
36"
33"
30"
39"
36"
30"
37 1/8"
34 1/8"
31 1/8"
40 1/8"
37 1/8"
31 1/8"
67
72
77
92
107
136
Note: Model numbers in the above chart are for right hand spurs. Replace “R” with “L” for left hand spur.
45°
OVERALL FRAME WIDTH
1"
90°
3/8"
BETWEEN FRAME WIDTH
2 1/2"
CENTER SUPPORT BAR
LEFT
HAND
RIGHT
HAND
AXLE SPACER
RIGHT
HAND
LEFT
HAND
IF USED WITH CURVE, DIMENSION “A”
SHOULD EQUAL LONGEST PACKAGE
“B”
“B”
Gravity Conveyors
45°
“X”
“A”
MOUNTING BRACKET
“X”
“A”
“R”
90°
EXISTING
CONVEYOR
SHELF ANGLE
SECTION “X-X”
Frame - 2 1/2 in. deep x 1 in. flange x 12 ga. galvanized steel
channel with bolt-in cross members. Aluminum frames also
available.
3 in. equivalent spacing. Spacers are zinc coated steel.
Spur Angles - 45° and 90°, right or left hand.
Couplings - Gravity hooks and rods on one end. Spur shelf
angle on opposite end. Bolt-in end couplers also available.
- 128 -
(989) 358-7000
Ball Transfer Table
Ball Transfer Tables are used where products
are required to manually rotate or move in any
direction. They are compatible with 1 3/8 in. dia.
and 1.9 in. dia. standard Gravity Roller Conveyor
and Skatewheel Conveyor.
Model Number:
LOAD CAPACITY CHART
Support
Centers
5'
10'
_BTR
___ -
Frame Capacity
Ball Capacity*
Max. Uniformly
Distributed Load
1300
1200
Max. Load
Per Ball
_ - _ - _ - ___
__
(S) Square Pattern
Ball Height (1/4", 1/8" or 5/16")
Length
(D) Diagonal Pattern
Frame Height (2 1/2 or 3 1/2")
Between Frame Width
Ball Spacing
50
NOMINAL
SPACING
Diagonal
Pattern
*Note: Maximum product weight should not exceed 150 lbs.
as product may only rest on 3 ball transfers at one time.
Cross Section for a 2 1/2 in. Deep Frame
NOMINAL
SPACING
1/8" STANDARD
5/16" OPTIONAL
BETWEEN FRAME WIDTH
2 1/2"
STANDARD
LENGTHS
AVAILABLE
IN 1/2 FT.
INCREMENTS
Cross Section for a 3 1/2 in. Deep Frame
SPACING
BETWEEN FRAME WIDTH
1/4"
3 1/2"
Square
Pattern
SPACING
BETWEEN FRAME WIDTH
2 1/2 IN. DEEP FRAMES (WEIGHT PER FOOT)
3 1/2 IN. DEEP FRAMES (WEIGHT PER FOOT)
10
13
16
10
13
16
28
26
33
38
43
53
22
23
25
28
31
38
---21
22
24
27
32
---18
19
21
23
28
Between
2" Cntrs. 3" Cntrs. 4" Cntrs. 6" Cntrs. 6" Cntrs.
Frame
Square Diagonal Square Square Diagonal
Width
---18
19
21
23
28
13
14
15
16
17
18
16
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Frame - 3 1/2 in. deep x 1 1/2 in. flange x 10 ga. galvanized steel
channel with bolt-in 10 ga. pans. Also available with 2 1/2 in. deep
x 1 in. flange x 12 ga. galvanized steel channel frame.
Between Frame Widths - 13 through 39 in one inch increments
for 3 1/2 in. deep frames. 10 in., 13 in., 16 in., 19 in., 22 in. and
28 in. for 2 1/2 in. deep frames.
Lengths - 2 ft. through 10 ft. in 1/2 foot increments.
End Couplers - Bolt-on type each end.
Ball Transfers - 1 in dia. ball transfers.
Spacings - Square spacings of 2 in., 4 in. and 6 in. Nominal
diagonal spacings of 3 in. and 6 in.
- 129 -
28
29
32
33
35
36
38
39
42
43
45
46
49
50
52
53
55
56
59
60
62
63
66
67
69
70
72
22
23
24
25
26
27
28
29
30
31
33
34
35
36
37
38
39
40
42
43
44
45
46
47
49
50
51
20
21
21
22
23
24
24
25
26
27
28
29
30
31
31
32
33
34
35
36
37
38
38
39
40
41
41
------18
19
20
21
21
22
22
23
24
25
26
27
27
28
29
30
30
31
31
32
33
34
34
35
35
------18
19
20
21
21
22
22
23
24
25
26
27
27
28
29
30
30
31
31
32
33
34
34
35
35
(989) 358-7000
Gravity Conveyors
Between
2" Cntrs. 3" Cntrs. 4" Cntrs. 6" Cntrs. 6" Cntrs.
Frame
Square Diagonal Square Square Diagonal
Width
Gravity Roller Conveyor
1 3/8 in. dia. x 18 ga. Rollers
1 3/8 in. dia. Gravity Roller Conveyor is ideal for
carrying lightweight packages or in operations requiring
lightweight moveable sections.
■ 6 Widths
■ 8 Roller Spacings
OVERALL FRAME WIDTH
1"
STEEL
BETWEEN FRAME WIDTH
3/32"
12" OVERALL WIDTH
WT. (LBS.)
ROLLER
CENTERS
10'
5'
RSHS1.4-12-1.5
1.5
107
54
RSHS1.4-12-3
3
74
38
RSHS1.4-12-4
4
65
34
RSHS1.4-12-4.5
4.5
63
33
RSHS1.4-12-6
6
57
30
RSHS1.4-12-8
8
53
28
RSHS1.4-12-9
9
51
27
RSHS1.4-12-12
12
49
25
21" OVERALL WIDTH
WT. (LBS.)
ROLLER
MODEL NO.
CENTERS
10'
5'
RSHS1.4-21-1.5
1.5
165
84
RSHS1.4-21-3
3
106
55
RSHS1.4-21-4
4
91
48
RSHS1.4-21-4.5
4.5
89
46
RSHS1.4-21-6
6
78
41
RSHS1.4-21-8
8
70
37
RSHS1.4-21-9
9
67
35
RSHS1.4-21-12
12
63
32
MODEL NO.
2 1/2"
ROLLERS HIGH
OVERALL FRAME WIDTH
1"
■ Rollers Set High or Low
BETWEEN FRAME WIDTH
1 13/32"
4"
15" OVERALL WIDTH
WT. (LBS.)
ROLLER
CENTERS
10'
5'
RSHS1.4-15-1.5
1.5
127
64
RSHS1.4-15-3
3
85
44
RSHS1.4-15-4
4
74
38
RSHS1.4-15-4.5
4.5
72
37
RSHS1.4-15-6
6
64
34
RSHS1.4-15-8
8
59
31
RSHS1.4-15-9
9
57
30
RSHS1.4-15-12
12
54
28
24" OVERALL WIDTH
WT. (LBS.)
ROLLER
MODEL NO.
CENTERS 10'
5'
RSHS1.4-24-1.5
1.5
184
93
RSHS1.4-24-3
3
117
61
RSHS1.4-24-4
4
100
52
RSHS1.4-24-4.5
4.5
97
50
RSHS1.4-24-6
6
85
45
RSHS1.4-24-8
8
76
40
RSHS1.4-24-9
9
73
38
RSHS1.4-24-12
12
67
35
MODEL NO.
18" OVERALL WIDTH
WT. (LBS.)
ROLLER
CENTERS
10'
5'
RSHS1.4-18-1.5
1.5
146
74
RSHS1.4-18-3
3
96
49
RSHS1.4-18-4
4
83
43
RSHS1.4-18-4.5
4.5
80
41
RSHS1.4-18-6
6
71
38
RSHS1.4-18-8
8
65
34
RSHS1.4-18-9
9
62
33
RSHS1.4-18-12
12
58
30
30" OVERALL WIDTH
WT. (LBS.)
ROLLER
MODEL NO.
CENTERS 10'
5'
RSHS1.4-30-1.5
1.5
223 113
RSHS1.4-30-3
3
139
72
RSHS1.4-30-4
4
118
61
RSHS1.4-30-4.5
4.5
114
59
RSHS1.4-30-6
6
98
53
RSHS1.4-30-8
8
88
46
RSHS1.4-30-9
9
83
44
RSHS1.4-30-12
12
77
40
MODEL NO.
Note: Weights listed are for 2 1/2 in. deep frames. For 4 in. deep frames, add 6 lbs. to 5 ft. sections; 12 lbs. to 10 ft. sections.
In Stock
ROLLERS LOW
ALUMINUM
Gravity Conveyors
LOAD CAPACITY CHART
Frame Support
Material Centers
Steel
Aluminum
5'
10'
5'
10'
Frame Capacity
Roller Capacity
Max. Uniformly
Max. Static
Distributed Load Load Per Roller
1300
350
120
710
160
12" OVERALL WIDTH
WT. (LBS.)
ROLLER
CENTERS
10'
5'
RAHS1.4-12-1.5
1.5
56
29
RAHS1.4-12-3
3
37
19
RAHS1.4-12-4
4
32
17
RAHS1.4-12-4.5
4.5
30
16
RAHS1.4-12-6
6
27
15
RAHS1.4-12-8
8
25
13
RAHS1.4-12-9
9
24
13
RAHS1.4-12-12
12
22
12
21" OVERALL WIDTH
WT. (LBS.)
ROLLER
MODEL NO.
CENTERS
10'
5'
RAHS1.4-21-1.5
1.5
84
43
RAHS1.4-21-3
3
53
27
RAHS1.4-21-4
4
44
23
RAHS1.4-21-4.5
4.5
41
21
RAHS1.4-21-6
6
37
20
RAHS1.4-21-8
8
33
18
RAHS1.4-21-9
9
32
17
RAHS1.4-21-12
12
29
15
MODEL NO.
15" OVERALL WIDTH
WT. (LBS.)
ROLLER
CENTERS
10'
5'
RAHS1.4-15-1.5
1.5
66
33
RAHS1.4-15-3
3
42
22
RAHS1.4-15-4
4
36
19
RAHS1.4-15-4.5
4.5
32
17
RAHS1.4-15-6
6
31
16
RAHS1.4-15-8
8
28
15
RAHS1.4-15-9
9
26
14
RAHS1.4-15-12
12
24
13
24" OVERALL WIDTH
WT. (LBS.)
ROLLER
MODEL NO.
CENTERS 10'
5'
RAHS1.4-24-1.5
1.5
93
47
RAHS1.4-24-3
3
58
30
RAHS1.4-24-4
4
49
26
RAHS1.4-24-4.5
4.5
45
23
RAHS1.4-24-6
6
41
22
RAHS1.4-24-8
8
36
19
RAHS1.4-24-9
9
34
18
RAHS1.4-24-12
12
31
17
MODEL NO.
18" OVERALL WIDTH
WT. (LBS.)
ROLLER
CENTERS
10'
5'
RAHS1.4-18-1.5
1.5
75
38
RAHS1.4-18-3
3
47
25
RAHS1.4-18-4
4
40
21
RAHS1.4-18-4.5
4.5
37
19
RAHS1.4-18-6
6
34
18
RAHS1.4-18-8
8
30
16
RAHS1.4-18-9
9
29
15
RAHS1.4-18-12
12
27
14
30" OVERALL WIDTH
WT. (LBS.)
ROLLER
MODEL NO.
CENTERS 10'
5'
RAHS1.4-30-1.5
1.5
112
57
RAHS1.4-30-3
3
68
36
RAHS1.4-30-4
4
57
30
RAHS1.4-30-4.5
4.5
52
27
RAHS1.4-30-6
6
47
26
RAHS1.4-30-8
8
42
22
RAHS1.4-30-9
9
39
21
RAHS1.4-30-12
12
36
19
MODEL NO.
Note: Weights listed are for 2 1/2 in. deep frames. For 4 in. deep frames, add 2 1/2 lbs. to 5 ft. sections; 5 lbs. to 10 ft. sections.
In Stock
Frame - 2 1/2 in. deep by 1 in. flange x 12 ga. galvanized steel or
1/8 in. aluminum channel with bolt-in cross members, spaced
every 2 ft. An economy lite line is available with 14 ga. channel
frames. 4 in. deep channel frames for rollers low.
End Couplers - Gravity hooks on one end - rod on opposite end.
All couplings are bolted to frame. Bolt-in end couplers also
available.
Rollers - 1 3/8 in. dia. x 18 ga. galvanized or heat-treated aluminum
tubing. Oiled ball bearings both ends.
Lengths - 5 ft. and 10 ft. straight sections. Special lengths
available.
Axles - 1/4 in. dia. spring retained axle spaced on 1 1/2 in., 3 in.,
4 in., 4 1/2 in., 6 in., 8 in., 9 in. or 12 in. centers.
- 130 -
(989) 358-7000
Gravity Roller Curve Conveyor
1 3/8 in. dia. Gravity Roller Curves are compatible
with straight sections, providing flexibility to your
conveyor line. They are ideal for carrying
lightweight packages.
■ 6 Widths
STEEL
■ 45° and 90° Curves
12" OVERALL WIDTH
(36" Inside Radius)
■ Gravity Hooks and Rods
on Both Ends
MODEL NO.
ROLLER
CENTERS
RSHC1.4-12-1.5
RSHC1.4-12-3
1.5
3
15" OVERALL WIDTH
(33" Inside Radius)
WT. (LBS.)
90°
45°
58
42
29
22
21" OVERALL WIDTH
(39" Inside Radius)
WT. (LBS.)
ROLLER
MODEL NO.
CENTERS 90°
45°
RSHC1.4-21-1.5
RSHC1.4-21-3
1.5
3
92
63
46
32
MODEL NO.
ROLLER
CENTERS
RSHC1.4-15-1.5
RSHC1.4-15-3
1.5
3
18" OVERALL WIDTH
(30" Inside Radius)
WT. (LBS.)
90°
- 47
45°
- 24
MODEL NO.
ROLLER
CENTERS
RSHC1.4-18-1.5
RSHC1.4-18-3
1.5
3
24" OVERALL WIDTH
(36" Inside Radius)
MODEL NO.
ROLLER
CENTERS
RSHC1.4-24-1.5
RSHC1.4-24-3
1.5
3
30" OVERALL WIDTH
(30" Inside Radius)
WT. (LBS.)
ROLLER
MODEL NO.
CENTERS 90°
45°
WT. (LBS.)
90°
45°
102
69
51
35
WT. (LBS.)
90°
45°
--49
27
RSHC1.4-30-1.5
RSHC1.4-30-3
1.5
3
-76
-41
Note: Weights listed are for 2 1/2 in. deep frames. For 4 in. deep frames, add 2 1/2 lbs. to 45° sections; 5 lbs. to 90° sections.
In Stock
DIU
S
ALUMINUM
TS
OU
INSID
E RA
DIU
S
IDE
RA
12" OVERALL WIDTH
(36" Inside Radius)
.
MODEL NO.
RAHC1.4-12-1.5
RAHC1.4-12-3
ROLLER
CENTERS
1.5
3
15" OVERALL WIDTH
(33" Inside Radius)
WT. (LBS)
90°
31
21
45°
16
11
21" OVERALL WIDTH
(39" Inside Radius)
ROLLER
MODEL NO.
CENTERS
RAHC1.4-21-1.5
1.5
RAHC1.4-21-3
3
ROLLER
CENTERS
1.5
3
WT. (LBS.)
90°
- 24
45°
- 13
MODEL NO.
ROLLER
CENTERS
RAHC1.4-18-1.5
RAHC1.4-18-3
1.5
3
24" OVERALL WIDTH
(36" Inside Radius)
WT. (LBS.)
90°
45°
47
31
MODEL NO.
RAHC1.4-15-1.5
RAHC1.4-15-3
18" OVERALL WIDTH
(30" Inside Radius)
24
16
MODEL NO.
ROLLER
CENTERS
RAHC1.4-24-1.5
RAHC1.4-24-3
1.5
3
WT. (LBS.)
90°
45°
--27
14
30" OVERALL WIDTH
(30" Inside Radius)
WT. (LBS.)
90°
45°
52
34
26
18
MODEL NO.
RAHC1.4-30-1.5
RAHC1.4-30-3
ROLLER
CENTERS
1.5
3
WT. (LBS.)
90°
45°
-40
-21
Note: Weights listed are for 2 1/2 in. deep frames. For 4 in. deep frames, add 2 1/2 lbs. to 45° sections; 5 lbs. to 90° sections.
In Stock
1"
1"
BETWEEN FRAME WIDTH
BETWEEN FRAME WIDTH
3/32"
1 13/32"
4"
2 1/2"
ROLLERS HIGH
ROLLERS LOW
Rollers - 1 3/8 in. dia. x 18 ga. galvanized or heat-treated
aluminum tubing. Oiled ball bearings both ends.
Frame - 2 1/2 in. deep x 1 in. flange x 12 ga. galvanized steel
or 1/8 in. aluminum channel with bolt-in cross members. 4 in. deep
channel frames for rollers low.
Axles - 1/4 in. dia. spring retained axle spaced on 1 1/2 in.
or 3 in. equivalent spacing.
Curves - 45° and 90°: 48 in. outside radius - 12 in., 15 in. and
18 in. widths; 60 in. outside radius - 21 in., 24 in. and 30 in. widths.
End Couplers - Gravity hooks and rods on both ends of curve.
Bolt-in end couplers also available.
- 131 -
(989) 358-7000
Gravity Conveyors
OVERALL FRAME WIDTH
OVERALL FRAME WIDTH
1.9 in. dia. x 16 ga. Rollers
1.9 in. dia. Gravity Roller Conveyor is used in permanent
installations. It provides an economical means of carrying
lightweight to medium weight packages.
Between
Roller
Model No.
Frame
Centers
1.9 x 16 ga. Rollers
Width
(inches)
■ 27 Between Frame Widths
■ 8 Roller Centers
1/4"
3 1/2"
Gravity Conveyors
Support
Centers
Roller Capacity
Max. Load
Per Roller
5'
3300
1200
356
262
201
168
112
86
68
60
223
171
138
119
29
GPHS-1.9x16-29-2
GPHS-1.9x16-29-3
GPHS-1.9x16-29-4.5
GPHS-1.9x16-29-6
2
3
4.5
6
182
134
100
86
362
266
204
170
2
3
4.5
6
119
91
71
63
236
180
144
124
30
GPHS-1.9x16-30-2
GPHS-1.9x16-30-3
GPHS-1.9x16-30-4.5
GPHS-1.9x16-30-6
2
3
4.5
6
188
138
102
88
375
275
207
175
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
125
95
74
65
128
97
75
66
134
101
78
68
138
104
80
70
144
108
82
72
147
110
84
73
153
114
87
75
157
117
90
77
163
121
91
79
166
123
93
80
248
188
149
128
255
193
153
131
267
201
158
135
274
206
162
138
286
214
167
142
293
219
171
145
305
227
177
149
312
232
182
152
324
240
186
156
331
245
189
159
GPHS-1.9x16-31-2
GPHS-1.9x16-31-3
GPHS-1.9x16-31-4.5
GPHS-1.9x16-31-6
GPHS-1.9x16-32-2
GPHS-1.9x16-32-3
GPHS-1.9x16-32-4.5
GPHS-1.9x16-32-6
GPHS-1.9x16-33-2
GPHS-1.9x16-33-3
GPHS-1.9x16-33-4.5
GPHS-1.9x16-33-6
GPHS-1.9x16-34-2
GPHS-1.9x16-34-3
GPHS-1.9x16-34-4.5
GPHS-1.9x16-34-6
GPHS-1.9x16-35-2
GPHS-1.9x16-35-3
GPHS-1.9x16-35-4.5
GPHS-1.9x16-35-6
GPHS-1.9x16-36-2
GPHS-1.9x16-36-3
GPHS-1.9x16-36-4.5
GPHS-1.9x16-36-6
GPHS-1.9x16-37-2
GPHS-1.9x16-37-3
GPHS-1.9x16-37-4.5
GPHS-1.9x16-37-6
GPHS-1.9x16-38-2
GPHS-1.9x16-38-3
GPHS-1.9x16-38-4.5
GPHS-1.9x16-38-6
GPHS-1.9x16-39-2
GPHS-1.9x16-39-3
GPHS-1.9x16-39-4.5
GPHS-1.9x16-39-6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
191
140
105
89
194
142
106
90
201
147
109
93
207
151
110
95
210
153
113
96
213
155
115
97
220
160
118
100
223
162
119
101
229
166
122
103
381
279
213
177
388
284
216
180
400
292
222
184
413
301
225
189
419
305
231
191
426
310
234
194
438
318
240
198
445
323
243
201
457
331
249
205
GPHS-1.9x16-15-2
GPHS-1.9x16-15-3
GPHS-1.9x16-15-4.5
GPHS-1.9x16-15-6
2
3
4.5
6
16
GPHS-1.9x16-16-2
GPHS-1.9x16-16-3
GPHS-1.9x16-16-4.5
GPHS-1.9x16-16-6
GPHS-1.9x16-17-2
GPHS-1.9x16-17-3
GPHS-1.9x16-17-4.5
GPHS-1.9x16-17-6
GPHS-1.9x16-18-2
GPHS-1.9x16-18-3
GPHS-1.9x16-18-4.5
GPHS-1.9x16-18-6
GPHS-1.9x16-19-2
GPHS-1.9x16-19-3
GPHS-1.9x16-19-4.5
GPHS-1.9x16-19-6
GPHS-1.9x16-20-2
GPHS-1.9x16-20-3
GPHS-1.9x16-20-4.5
GPHS-1.9x16-20-6
GPHS-1.9x16-21-2
GPHS-1.9x16-21-3
GPHS-1.9x16-21-4.5
GPHS-1.9x16-21-6
GPHS-1.9x16-22-2
GPHS-1.9x16-22-3
GPHS-1.9x16-22-4.5
GPHS-1.9x16-22-6
GPHS-1.9x16-23-2
GPHS-1.9x16-23-3
GPHS-1.9x16-23-4.5
GPHS-1.9x16-23-6
GPHS-1.9x16-24-2
GPHS-1.9x16-24-3
GPHS-1.9x16-24-4.5
GPHS-1.9x16-24-6
GPHS-1.9x16-25-2
GPHS-1.9x16-25-3
GPHS-1.9x16-25-4.5
GPHS-1.9x16-25-6
GPHS-1.9x16-26-2
GPHS-1.9x16-26-3
GPHS-1.9x16-26-4.5
GPHS-1.9x16-26-6
24
26
260
178
131
99
84
15
25
10'
2
3
4.5
6
109
84
67
59
23
Max. Uniformly
Distributed Load
GPHS-1.9x16-28-2
GPHS-1.9x16-28-3
GPHS-1.9x16-28-4.5
GPHS-1.9x16-28-6
2
3
4.5
6
22
Frame Capacity
28
GPHS-1.9x16-14-2
GPHS-1.9x16-14-3
GPHS-1.9x16-14-4.5
GPHS-1.9x16-14-6
21
LOAD CAPACITY CHART
217
167
134
117
14
20
ROLLERS LOW
(Optional)
27
13
19
4 1/2"
10'
343
253
195
163
205
159
129
113
BETWEEN FRAME WIDTH
3/4"
5'
172
127
96
82
103
80
64
57
18
ROLLERS HIGH
Weights
(Lbs.)
2
3
4.5
6
10'
2
3
4.5
6
17
Between
Roller
Model No.
Frame
Centers
Width
(inches)
GPHS-1.9x16-27-2
GPHS-1.9x16-27-3
GPHS-1.9x16-27-4.5
GPHS-1.9x16-27-6
5'
GPHS-1.9x16-13-2
GPHS -1.9x16-13-3
GPHS-1. 9x16-13-4.5
GPHS-1.9x16-13-6
■ Bolt-in Cross Members
BETWEEN FRAME WIDTH
Weights
(Lbs.)
31
32
33
34
35
36
37
38
39
Note: Also available with 4 in., 8 in., 9 in., or 12 in. Roller Centers.
In Stock
Frame - 3 1/2 in. deep x 1 1/2 in. flange x 10 ga. galvanized
steel channel with bolt-in cross members. An economy lite line
is available with 12 ga. channel frames. 4 1/2 in. deep frames
for rollers low.
Between Frame Widths - 13 through 39 in full one inch
increments.
End Couplers - Bolt-on type for bolting sections together.
Lengths - 5 ft. and 10 ft. straight sections. Other lengths also
available.
Rollers - 1.9 in. dia. x 16 ga. galvanized steel tubing.
Grease-packed ball bearings both ends. Mild steel tubes
also available.
Axles - 7/16 spring retained hex axle spaced on 2 in., 3 in., 4 in.,
4 1/2 in., 6 in., 8 in., 9 in. or 12 in. centers.
- 132 -
(989) 358-7000
1.9 in. dia. x 13 ga. Rollers
Between
Roller
Model No.
Frame
Centers
Width
(inches)
217
157
115
97
434
314
236
194
136
102
79
68
271
203
159
135
29
GUHS-1.9x13-29-2
GUHS-1.9x13-29-3
GUHS-1.9x13-29-4.5
GUHS-1.9x13-29-6
2
3
4.5
6
224
162
118
100
446
322
242
198
2
3
4.5
6
143
107
81
71
284
212
165
140
30
GUHS-1.9x13-30-2
GUHS-1.9x13-30-3
GUHS-1.9x13-30-4.5
GUHS-1.9x13-30-6
2
3
4.5
6
230
166
121
102
459
331
247
203
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
149
111
84
73
155
115
87
75
161
119
90
77
168
124
93
80
174
128
95
82
180
132
98
84
186
136
101
86
193
141
104
89
199
145
107
91
205
149
110
93
296
220
171
144
309
229
177
149
321
237
183
153
334
246
189
158
346
254
194
162
359
263
200
167
371
271
206
171
384
280
212
176
396
288
218
180
409
297
224
185
GUHS-1.9x13-31-2
GUHS-1.9x13-31-3
GUHS-1.9x13-31-4.5
GUHS-1.9x13-31-6
GUHS-1.9x13-32-2
GUHS-1.9x13-32-3
GUHS-1.9x13-32-4.5
GUHS-1.9x13-32-6
GUHS-1.9x13-33-2
GUHS-1.9x13-33-3
GUHS-1.9x13-33-4.5
GUHS-1.9x13-33-6
GUHS-1.9x13-34-2
GUHS-1.9x13-34-3
GUHS-1.9x13-34-4.5
GUHS-1.9x13-34-6
GUHS-1.9x13-35-2
GUHS-1.9x13-35-3
GUHS-1.9x13-35-4.5
GUHS-1.9x13-35-6
GUHS-1.9x13-36-2
GUHS-1.9x13-36-3
GUHS-1.9x13-36-4.5
GUHS-1.9x13-36-6
GUHS-1.9x13-37-2
GUHS-1.9x13-37-3
GUHS-1.9x13-37-4.5
GUHS-1.9x13-37-6
GUHS-1.9x13-38-2
GUHS-1.9x13-38-3
GUHS-1.9x13-38-4.5
GUHS-1.9x13-38-6
GUHS-1.9x13-39-2
GUHS-1.9x13-39-3
GUHS-1.9x13-39-4.5
GUHS-1.9x13-39-6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
236
170
124
104
242
174
127
106
249
179
130
109
252
181
131
110
258
185
134
112
267
191
138
115
274
196
141
118
280
200
144
120
283
202
145
121
471
339
253
207
484
348
259
212
496
356
265
216
503
361
268
219
515
369
274
223
534
382
283
230
546
390
289
234
559
399
295
239
565
403
298
241
15
GUHS-1.9x13-15-2
GUHS-1.9x13-15-3
GUHS-1.9x13-15-4.5
GUHS-1.9x13-15-6
2
3
4.5
6
1/4"
16
GUHS-1.9x13-16-2
GUHS-1.9x13-16-3
GUHS-1.9x13-16-4.5
GUHS-1.9x13-16-6
3 1/2"
17
GUHS-1.9x13-17-2
GUHS-1.9x13-17-3
GUHS-1.9x13-17-4.5
GUHS-1.9x13-17-6
GUHS-1.9x13-18-2
GUHS-1.9x13-18-3
GUHS-1.9x13-18-4.5
GUHS-1.9x13-18-6
GUHS-1.9x13-19-2
GUHS-1.9x13-19-3
GUHS-1.9x13-19-4.5
GUHS-1.9x13-19-6
GUHS-1.9x13-20-2
GUHS-1.9x13-20-3
GUHS-1.9x13-20-4.5
GUHS-1.9x13-20-6
GUHS-1.9x13-21-2
GUHS-1.9x13-21-3
GUHS-1.9x13-21-4.5
GUHS-1.9x13-21-6
GUHS-1.9x13-22-2
GUHS-1.9x13-22-3
GUHS-1.9x13-22-4.5
GUHS-1.9x13-22-6
GUHS-1.9x13-23-2
GUHS-1.9x13-23-3
GUHS-1.9x13-23-4.5
GUHS-1.9x13-23-6
GUHS-1.9x13-24-2
GUHS-1.9x13-24-3
GUHS-1.9x13-24-4.5
GUHS-1.9x13-24-6
GUHS-1.9x13-25-2
GUHS-1.9x13-25-3
GUHS-1.9x13-25-4.5
GUHS-1.9x13-25-6
GUHS-1.9x13-26-2
GUHS-1.9x13-26-3
GUHS-1.9x13-26-4.5
GUHS-1.9x13-26-6
18
21
22
ROLLERS LOW
(Optional)
23
LOAD CAPACITY CHART
24
Frame Capacity
Roller Capacity
Max. Uniformly
Distributed Load
Max. Load
Per Roller
25
260
26
31
32
33
34
35
36
37
38
39
channel with bolt-in cross members. Specify 4 1/2 in. deep frames
for rollers low. An economy lite line is also available with 12 ga.
channel frames.
Lengths - 5 ft. and 10 ft. straight sections. Other lengths
also available.
Rollers - 1.9 in. dia. (1 7/8 in. actual) x 13 ga. steel tubing.
Oiled plain ball bearings both ends.
increments.
- 133 -
(989) 358-7000
Gravity Conveyors
2
3
4.5
6
130
98
76
66
4 1/2"
GUHS-1.9x13-28-2
GUHS-1.9x13-28-3
GUHS-1.9x13-28-4.5
GUHS-1.9x13-28-6
2
3
4.5
6
20
1200
28
GUHS-1.9x13-14-2
GUHS-1.9x13-14-3
GUHS-1.9x13-14-4.5
GUHS-1.9x13-14-6
BETWEEN FRAME WIDTH
3300
259
195
153
131
14
3/4"
5'
27
13
19
10'
10'
421
305
230
189
247
187
148
127
ROLLERS HIGH
Support
Centers
5'
211
153
113
95
124
94
73
64
Weights
(Lbs.)
2
3
4.5
6
10'
2
3
4.5
6
Between
Roller
Model No.
Frame
Centers
Width
(inches)
GUHS-1.9x13-27-2
GUHS-1.9x13-27-3
GUHS-1.9x13-27-4.5
GUHS-1.9x13-27-6
5'
GUHS-1.9x13-13-2
GUHS-1.9x13-13-3
GUHS-1.9x13-13-4.5
GUHS-1.9x13-13-6
BETWEEN FRAME WIDTH
Weights
(Lbs.)
1.9 in. dia. x .145 Wall Rollers
160
118
89
76
319
235
180
151
28
GUHS-1.9x9-28-2
GUHS-1.9x9-28-3
GUHS-1.9x9-28-4.5
GUHS-1.9x9-28-6
2
3
4.5
6
277
197
141
117
554
394
290
234
2
3
4.5
6
169
124
93
79
337
247
189
157
29
GUHS-1.9x9-29-2
GUHS-1.9x9-29-3
GUHS-1.9x9-29-4.5
GUHS-1.9x9-29-6
2
3
4.5
6
287
204
146
121
572
406
298
240
GUHS-1.9x9-16-2
GUHS-1.9x9-16-3
GUHS-1.9x9-16-4.5
GUHS-1.9x9-16-6
2
3
4.5
6
179
131
97
83
356
260
198
164
30
GUHS-1.9x9-30-2
GUHS-1.9x9-30-3
GUHS-1.9x9-30-4.5
GUHS-1.9x9-30-6
2
3
4.5
6
296
210
150
124
591
419
307
247
GUHS-1.9x9-17-2
GUHS-1.9x9-17-3
GUHS-1.9x9-17-4.5
GUHS-1.9x9-17-6
GUHS-1.9x9-18-2
GUHS-1.9x9-18-3
GUHS-1.9x9-18-4.5
GUHS-1.9x9-18-6
GUHS-1.9x9-19-2
GUHS-1.9x9-19-3
GUHS-1.9x9-19-4.5
GUHS-1.9x9-19-6
GUHS-1.9x9-20-2
GUHS-1.9x9-20-3
GUHS-1.9x9-20-4.5
GUHS-1.9x9-20-6
GUHS-1.9x9-21-2
GUHS-1.9x9-21-3
GUHS-1.9x9-21-4.5
GUHS-1.9x9-21-6
GUHS-1.9x9-22-2
GUHS-1.9x9-22-3
GUHS-1.9x9-22-4.5
GUHS-1.9x9-22-6
GUHS-1.9x9-23-2
GUHS-1.9x9-23-3
GUHS-1.9x9-23-4.5
GUHS-1.9x9-23-6
GUHS-1.9x9-24-2
GUHS-1.9x9-24-3
GUHS-1.9x9-24-4.5
GUHS-1.9x9-24-6
GUHS-1.9x9-25-2
GUHS-1.9x9-25-3
GUHS-1.9x9-25-4.5
GUHS-1.9x9-25-6
GUHS-1.9x9-26-2
GUHS-1.9x9-26-3
GUHS-1.9x9-26-4.5
GUHS-1.9x9-26-6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
188
137
101
86
206
149
109
92
212
153
112
94
216
156
114
96
222
160
116
98
228
164
119
100
237
170
123
103
247
175
128
106
253
181
130
109
262
187
135
112
374
272
206
170
411
297
223
183
423
305
229
187
430
310
232
190
442
318
237
194
455
327
244
199
473
339
252
205
486
348
261
210
504
360
267
216
523
373
275
223
GUHS-1.9x9-31-2
GUHS-1.9x9-31-3
GUHS-1.9x9-31-4.5
GUHS-1.9x9-31-6
GUHS-1.9x9-32-2
GUHS-1.9x9-32-3
GUHS-1.9x9-32-4.5
GUHS-1.9x9-32-6
GUHS-1.9x9-33-2
GUHS-1.9x9-33-3
GUHS-1.9x9-33-4.5
GUHS-1.9x9-33-6
GUHS-1.9x9-34-2
GUHS-1.9x9-34-3
GUHS-1.9x9-34-4.5
GUHS-1.9x9-34-6
GUHS-1.9x9-35-2
GUHS-1.9x9-35-3
GUHS-1.9x9-35-4.5
GUHS-1.9x9-35-6
GUHS-1.9x9-36-2
GUHS-1.9x9-36-3
GUHS-1.9x9-36-4.5
GUHS-1.9x9-36-6
GUHS-1.9x9-37-2
GUHS-1.9x9-37-3
GUHS-1.9x9-37-4.5
GUHS-1.9x9-37-6
GUHS-1.9x9-38-2
GUHS-1.9x9-38-3
GUHS-1.9x9-38-4.5
GUHS-1.9x9-38-6
GUHS-1.9x9-39-2
GUHS-1.9x9-39-3
GUHS-1.9x9-39-4.5
GUHS-1.9x9-39-6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
2
3
4.5
6
305
216
154
127
314
222
158
130
321
227
161
133
330
233
165
136
339
239
169
139
354
249
176
144
358
254
177
147
364
256
180
148
373
262
184
151
609
431
315
253
628
444
324
260
640
452
330
264
659
465
338
271
677
477
347
277
708
498
361
288
720
506
364
292
727
511
370
295
745
523
379
301
2
3
4.5
6
15
GUHS-1.9x9-15-2
GUHS-1.9x9-15-3
GUHS-1.9x9-15-4.5
GUHS-1.9x9-15-6
16
1/4"
17
3/4"
20
21
4 1/2"
Gravity Conveyors
541
385
284
229
GUHS-1.9x9-14-2
GUHS-1.9x9-14-3
GUHS-1.9x9-14-4.5
GUHS-1.9x9-14-6
18
22
ROLLERS LOW
(Optional)
23
LOAD CAPACITY CHART
24
Frame Capacity
Roller Capacity
Max. Uniformly
Distributed Load
Max. Load
Per Roller
25
300
26
271
193
139
115
14
19
1200
27
2
3
4.5
6
13
BETWEEN FRAME WIDTH
3300
10'
GUHS-1.9x9-27-2
GUHS-1.9x9-27-3
GUHS-1.9x9-27-4.5
GUHS-1.9x9-27-6
10'
154
114
86
74
ROLLERS HIGH
5'
5'
307
227
175
147
5'
2
3
4.5
6
3 1/2"
10'
Roller
Centers
(inches)
GUHS-1.9x9-13-2
GUHS-1.9x9-13-3
GUHS-1.9x9-13-4.5
GUHS-1.9x9-13-6
Support
Centers
Model No.
1.9 x 9 ga. Rollers
Roller
Centers
(inches)
Weights
(Lbs.)
Between
Frame
Width
Model No.
1.9 x 9 ga. Rollers
BETWEEN FRAME WIDTH
Weights
(Lbs.)
Between
Frame
Width
31
32
33
34
35
36
37
38
39
Frame - 3 1/2 in. deep x 1 1/2 in. flange x 10 ga. galvanized
steel channel with bolt-in cross members. An economy lite line
is also available with 12 ga. channel frames. Specify
4 1/2 in. deep frames for rollers low.
Lengths - 5 ft. and 10 ft. straight sections. Other lengths also
available.
increments.
4 1/2 in., 6 in., 8 in., 9 in. or 12 in. centers.
Rollers - 1.9 in. dia. x .145 wall steel tubing. Bearings are labyrinth
shielded and oiled.
- 134 -
(989) 358-7000
Gravity Roller Curve Conveyor
1.9 in. dia. Rollers
1.9 in. dia. Gravity Roller Curves are used in permanent
installations to carry medium weight packages. They are
compatible with straight sections providing flexibility to
your conveyor line.
STRAIGHT ROLLER CURVE
Between Rollers
Inside
Frame
Per
Radius
Width 90° Curve
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
22
Straight
Rollers
20
Tapered
Rollers
36
Straight
Rollers
32
Tapered
Rollers
1.9 dia. x 16 ga. Rollers
Model Number
TAPERED ROLLER CURVE
Weight (Lbs.)
45°
90°
Model Number
2 ½" to 1 11/16" x 14 ga.Tapered Rollers
Weight (Lbs.)
45°
90°
Model Number
Weight
(Lbs.)
Model Number
45°
90°
Weight (Lbs.)
45°
90°
32 1/2
32 1/2
32 1/2
32 1/2
32 1/2
GPHC1.9x16-13-3
GPHC1.9x16-14-3
GPHC1.9x16-15-3
GPHC1.9x16-16-3
GPHC1.9x16-17-3
52
55
57
59
62
92
96
100
104
109
GUHC1.9x13-13-3
GUHC1.9x13-14-3
GUHC1.9x13-15-3
GUHC1.9x13-16-3
GUHC1.9x13-17-3
60
62
65
68
70
105
110
115
120
126
GUHC1.9x9-13-3
GUHC1.9x9-14-3
GUHC1.9x9-15-3
GUHC1.9x9-16-3
GUHC1.9x9-17-3
71
73
77
81
85
129
136
143
149
156
GPHC1.9x16-13-3
GPHC1.9x16-14-3
GPHC1.9x16-15-3
GPHC1.9x16-16-3
GPHC1.9x16-17-3
66
69
73
76
79
110
115
121
126
132
32 1/2
32 1/2
32 1/2
32 1/2
32 1/2
GPHC1.9x16-18-3
GPHC1.9x16-19-3
GPHC1.9x16-20-3
GPHC1.9x16-21-3
GPHC1.9x16-22-3
64
66
68
70
72
113
117
121
125
130
GUHC1.9x13-18-3
GUHC1.9x13-19-3
GUHC1.9x13-20-3
GUHC1.9x13-21-3
GUHC1.9x13-22-3
73
76
78
81
84
131
136
141
147
152
GUHC1.9x9-18-3
GUHC1.9x9-19-3
GUHC1.9x9-20-3
GUHC1.9x9-21-3
GUHC1.9x9-22-3
92
94
96
98
101
163
170
177
184
191
GPHC1.9x16-18-3
GPHC1.9x16-19-3
GPHC1.9x16-20-3
GPHC1.9x16-21-3
GPHC1.9x16-22-3
83
86
90
93
97
137
142
148
153
159
32 1/2
32 1/2
32 1/2
32 1/2
32 1/2
48
48
48
48
48
48
48
48
48
48
48
48
GPHC1.9x16-23-3
GPHC1.9x16-24-3
GPHC1.9x16-25-3
GPHC1.9x16-26-3
GPHC1.9x16-27-3
GPHC1.9x16-28-3
GPHC1.9x16-29-3
GPHC1.9x16-30-3
GPHC1.9x16-31-3
GPHC1.9x16-32-3
GPHC1.9x16-33-3
GPHC1.9x16-34-3
GPHC1.9x16-35-3
GPHC1.9x16-36-3
GPHC1.9x16-37-3
GPHC1.9x16-38-3
GPHC1.9x16-39-3
74
76
78
80
82
117
118
123
125
127
131
135
138
140
144
146
150
134
138
142
146
151
232
239
245
251
258
264
270
276
283
289
295
302
GUHC1.9x13-23-3
GUHC1.9x13-24-3
GUHC1.9x13-25-3
GUHC1.9x13-26-3
GUHC1.9x13-27-3
GUHC1.9x13-28-3
GUHC1.9x13-29-3
GUHC1.9x13-30-3
GUHC1.9x13-31-3
GUHC1.9x13-32-3
GUHC1.9x13-33-3
GUHC1.9x13-34-3
GUHC1.9x13-35-3
GUHC1.9x13-36-3
GUHC1.9x13-37-3
GUHC1.9x13-38-3
GUHC1.9x13-39-3
86
89
91
94
97
140
144
148
152
156
160
162
166
172
176
180
183
157
162
167
173
178
278
286
294
302
310
318
326
334
342
350
358
366
GUHC1.9x9-23-3
GUHC1.9x9-24-3
GUHC1.9x9-25-3
GUHC1.9x9-26-3
GUHC1.9x9-27-3
GUHC1.9x9-28-3
GUHC1.9x9-29-3
GUHC1.9x9-30-3
GUHC1.9x9-31-3
GUHC1.9x9-32-3
GUHC1.9x9-33-3
GUHC1.9x9-34-3
GUHC1.9x9-35-3
GUHC1.9x9-36-3
GUHC1.9x9-37-3
GUHC1.9x9-38-3
GUHC1.9x9-39-3
105
109
111
115
119
176
182
188
194
199
203
209
215
224
227
231
237
198
204
211
218
225
358
369
380
391
401
412
423
433
444
455
465
476
GPHC1.9x16-23-3
GPHC1.9x16-24-3
GPHC1.9x16-25-3
GPHC1.9x16-26-3
GPHC1.9x16-27-3
GPHC1.9x16-28-3
GPHC1.9x16-29-3
GPHC1.9x16-30-3
GPHC1.9x16-31-3
GPHC1.9x16-32-3
GPHC1.9x16-33-3
GPHC1.9x16-34-3
GPHC1.9x16-35-3
GPHC1.9x16-36-3
GPHC1.9x16-37-3
GPHC1.9x16-38-3
GPHC1.9x16-39-3
100
103
107
110
114
137
141
145
149
153
169
174
179
183
187
196
205
164
169
175
180
186
286
294
302
311
319
327
335
343
351
360
368
376
* For tapered rollers, add “T” to Model Number. Example: GUHC1.9 x 16-13-3-45T
In Stock
BETWEEN FRAME WIDTH
BETWEEN FRAME WIDTH
1/4"
1/4"
3 1/2"
INSID
E RAD
IUS
OU
TS
ID
E
RA
DI
US
TAPERED
ROLLERS HIGH
ROLLERS HIGH
BETWEEN FRAME WIDTH
3/4"
BETWEEN FRAME WIDTH
3/4"
4 1/2"
ROLLERS LOW
(Optional)
4 1/2"
TAPERED
ROLLERS LOW
(Optional)
channel with bolt-in cross members. Specify 4 1/2 in. deep frames
for rollers low.
Rollers - 1.9 in. dia. x 16 ga. galvanized steel or unplated tube
with grease-packed ball bearings both ends. 1.9 in. dia. x
13 ga. and 1.9 in. dia. x 9 ga. steel tube also available with
oiled ball bearings both ends. 2 1/2" to 1 11/16" tapered zinc
plated rollers. Mild steel tapered rollers also available.
Between Frame Widths - 13 through 39 in full one inch increments.
Curves - 45° and 90° with 32 1/2 in. inside radius for widths up to
27 in. and 48 in. inside radius for 28 in. through 39 in. widths.
Axles - 7/16" spring retained hex axle spaced on 3 in.
equivalent centers.
End Couplers - Bolt-on type each end.
- 135 -
(989) 358-7000
Gravity Conveyors
3 1/2"
2 1/2 in. dia. Gravity Roller Conveyor is used in
permanent installations. It provides an economical
means of carrying medium to heavy weight packages.
Between
Roller
Model No.
Frame
Centers
Width
(inches)
1/4"
4"
ROLLERS HIGH
Gravity Conveyors
2100
182
148
121
101
363
296
235
202
29
GUHS-2.5x11-29-3
GUHS-2.5x11-29-4
GUHS-2.5x11-29-6
GUHS-2.5x11-29-8
3
4
6
8
291
232
184
149
582
463
356
297
3
4
6
8
190
155
126
105
379
308
244
209
30
GUHS-2.5x11-30-3
GUHS-2.5x11-30-4
GUHS-2.5x11-30-6
GUHS-2.5x11-30-8
3
4
6
8
298
237
188
151
595
473
363
302
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
198
161
131
108
205
166
135
111
213
172
139
115
220
177
143
118
228
184
148
121
236
190
153
125
245
196
158
129
251
201
161
131
260
208
166
135
268
214
171
139
396
321
254
216
409
331
261
222
426
344
270
229
439
354
277
235
456
367
286
242
472
379
296
249
489
392
305
256
502
402
312
262
519
415
321
269
536
428
330
276
GUHS-2.5x11-31-3
GUHS-2.5x11-31-4
GUHS-2.5x11-31-6
GUHS-2.5x11-31-8
GUHS-2.5x11-32-3
GUHS-2.5x11-32-4
GUHS-2.5x11-32-6
GUHS-2.5x11-32-8
GUHS-2.5x11-33-3
GUHS-2.5x11-33-4
GUHS-2.5x11-33-6
GUHS-2.5x11-33-8
GUHS-2.5x11-34-3
GUHS-2.5x11-34-4
GUHS-2.5x11-34-6
GUHS-2.5x11-34-8
GUHS-2.5x11-35-3
GUHS-2.5x11-35-4
GUHS-2.5x11-35-6
GUHS-2.5x11-35-8
GUHS-2.5x11-36-3
GUHS-2.5x11-36-4
GUHS-2.5x11-36-6
GUHS-2.5x11-36-8
GUHS-2.5x11-37-3
GUHS-2.5x11-37-4
GUHS-2.5x11-37-6
GUHS-2.5x11-37-8
GUHS-2.5x11-38-3
GUHS-2.5x11-38-4
GUHS-2.5x11-38-6
GUHS-2.5x11-38-8
GUHS-2.5x11-39-3
GUHS-2.5x11-39-4
GUHS-2.5x11-39-6
GUHS-2.5x11-39-8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
306
243
193
155
315
250
198
159
323
256
202
162
329
261
206
165
338
267
211
169
346
274
216
172
355
280
221
176
361
285
221
179
370
292
229
182
612
486
372
309
629
499
382
317
646
512
391
317
658
521
398
330
675
534
407
337
692
547
417
344
709
560
426
351
722
570
433
357
739
583
442
364
3
4
6
8
16
GUHS-2.5x11-16-3
GUHS-2.5x11-16-4
GUHS-2.5x11-16-6
GUHS-2.5x11-16-8
GUHS-2.5x11-17-3
GUHS-2.5x11-17-4
GUHS-2.5x11-17-6
GUHS-2.5x11-17-8
GUHS-2.5x11-18-3
GUHS-2.5x11-18-4
GUHS-2.5x11-18-6
GUHS-2.5x11-18-8
GUHS-2.5x11-19-3
GUHS-2.5x11-19-4
GUHS-2.5x11-19-6
GUHS-2.5x11-19-8
GUHS-2.5x11-20-3
GUHS-2.5x11-20-4
GUHS-2.5x11-20-6
GUHS-2.5x11-20-8
GUHS-2.5x11-21-3
GUHS-2.5x11-21-4
GUHS-2.5x11-21-6
GUHS-2.5x11-21-8
GUHS-2.5x11-22-3
GUHS-2.5x11-22-4
GUHS-2.5x11-22-6
GUHS-2.5x11-22-8
GUHS-2.5x11-23-3
GUHS-2.5x11-23-4
GUHS-2.5x11-23-6
GUHS-2.5x11-23-8
GUHS-2.5x11-24-3
GUHS-2.5x11-24-4
GUHS-2.5x11-24-6
GUHS-2.5x11-24-8
GUHS-2.5x11-25-3
GUHS-2.5x11-25-4
GUHS-2.5x11-25-6
GUHS-2.5x11-25-8
GUHS-2.5x11-26-3
GUHS-2.5x11-26-4
GUHS-2.5x11-26-6
GUHS-2.5x11-26-8
22
LOAD CAPACITY CHART
10'
569
453
349
291
GUHS-2.5x11-15-3
GUHS-2.5x11-15-4
GUHS-2.5x11-15-6
GUHS-2.5x11-15-8
23
5200
285
227
181
146
15
21
5'
3
4
6
8
175
143
118
98
4"
Max. Load
Per Roller
GUHS-2.5x11-28-3
GUHS-2.5x11-28-4
GUHS-2.5x11-28-6
GUHS-2.5x11-28-8
3
4
6
8
20
Max. Uniformly
Distributed Load
28
GUHS-2.5x11-14-3
GUHS-2.5x11-14-4
GUHS-2.5x11-14-6
GUHS-2.5x11-14-8
3/4"
Roller Capacity
350
286
228
196
14
19
Frame Capacity
27
13
BETWEEN FRAME WIDTH
Support
Centers
10'
553
441
340
284
333
273
219
189
18
ROLLERS LOW
(Optional)
5'
277
221
176
142
167
137
113
95
17
24
25
650
26
Weights
(Lbs.)
3
4
6
8
10'
3
4
6
8
BETWEEN FRAME WIDTH
Between
Roller
Model No.
Frame
Centers
Width
(inches)
GUHS-2.5x11-27-3
GUHS-2.5x11-27-4
GUHS-2.5x11-27-6
GUHS-2.5x11-27-8
5'
GUHS-2.5x11-13-3
GUHS-2.5x11-13-4
GUHS-2.5x11-13-6
GUHS-2.5x11-13-8
■ Painted Steel Frames
Weights
(Lbs.)
31
32
33
34
35
36
37
38
39
Note: Also available with 9 in. or 12 in. roller centers.
In Stock
Frame - 4 in. deep x 1 1/2 in. flange x 7 ga. painted steel
channel with bolt-in cross members for rollers high; welded
cross members for rollers low.
Lengths - 5 ft. and 10 ft. straight sections.
increments (larger widths available).
8 in., 9 in. or 12 in. centers.
Rollers - 2 1/2 in. dia. x 11 ga. steel tubing. Grease packed plain
ball bearings both ends. Labyrinth shielded bearings optional.
- 136 -
(989) 358-7000
2 9/16 in. dia. x .180 Wall Rollers
2 9/16 in. dia. Gravity Roller Conveyor is used in
permanent installations. It provides an economical
means of carrying medium to heavy weight packages.
347
273
214
170
693
546
413
340
211
170
137
113
422
340
266
225
28
GUHS-2.6x7-28-3
GUHS-2.6x7-28-4
GUHS-2.6x7-28-6
GUHS-2.6x7-28-8
3
4
6
8
357
281
220
175
713
561
425
349
3
4
6
8
224
180
144
118
447
359
279
235
29
GUHS-2.6x7-29-3
GUHS-2.6x7-29-4
GUHS-2.6x7-29-6
GUHS-2.6x7-29-8
3
4
6
8
367
289
226
179
734
577
436
357
GUHS-2.6x7-16-3
GUHS-2.6x7-16-4
GUHS-2.6x7-16-6
GUHS-2.6x7-16-8
3
4
6
8
232
186
149
122
463
371
289
243
30
GUHS-2.6x7-30-3
GUHS-2.6x7-30-4
GUHS-2.6x7-30-6
GUHS-2.6x7-30-8
3
4
6
8
378
297
232
183
755
593
447
366
GUHS-2.6x7-17-3
GUHS-2.6x7-17-4
GUHS-2.6x7-17-6
GUHS-2.6x7-17-8
GUHS-2.6x7-18-3
GUHS-2.6x7-18-4
GUHS-2.6x7-18-6
GUHS-2.6x7-18-8
GUHS-2.6x7-19-3
GUHS-2.6x7-19-4
GUHS-2.6x7-19-6
GUHS-2.6x7-19-8
GUHS-2.6x7-20-3
GUHS-2.6x7-20-4
GUHS-2.6x7-20-6
GUHS-2.6x7-20-8
GUHS-2.6x7-21-3
GUHS-2.6x7-21-4
GUHS-2.6x7-21-6
GUHS-2.6x7-21-8
GUHS-2.6x7-22-3
GUHS-2.6x7-22-4
GUHS-2.6x7-22-6
GUHS-2.6x7-22-8
GUHS-2.6x7-23-3
GUHS-2.6x7-23-4
GUHS-2.6x7-23-6
GUHS-2.6x7-23-8
GUHS-2.6x7-24-3
GUHS-2.6x7-24-4
GUHS-2.6x7-24-6
GUHS-2.6x7-24-8
GUHS-2.6x7-25-3
GUHS-2.6x7-25-4
GUHS-2.6x7-25-6
GUHS-2.6x7-25-8
GUHS-2.6x7-26-3
GUHS-2.6x7-26-4
GUHS-2.6x7-26-6
GUHS-2.6x7-26-8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
244
195
156
127
255
203
162
131
263
210
167
135
274
218
173
139
284
226
179
144
294
233
185
148
305
241
191
153
315
249
197
157
326
257
202
161
336
265
208
166
488
390
302
253
509
406
313
262
526
419
323
269
547
435
334
278
568
451
345
287
588
466
357
296
609
482
368
304
630
498
379
313
651
514
391
322
672
530
402
331
GUHS-2.6x7-31-3
GUHS-2.6x7-31-4
GUHS-2.6x7-31-6
GUHS-2.6x7-31-8
GUHS-2.6x7-32-3
GUHS-2.6x7-32-4
GUHS-2.6x7-32-6
GUHS-2.6x7-32-8
GUHS-2.6x7-33-3
GUHS-2.6x7-33-4
GUHS-2.6x7-33-6
GUHS-2.6x7-33-8
GUHS-2.6x7-34-3
GUHS-2.6x7-34-4
GUHS-2.6x7-34-6
GUHS-2.6x7-34-8
GUHS-2.6x7-35-3
GUHS-2.6x7-35-4
GUHS-2.6x7-35-6
GUHS-2.6x7-35-8
GUHS-2.6x7-36-3
GUHS-2.6x7-36-4
GUHS-2.6x7-36-6
GUHS-2.6x7-36-8
GUHS-2.6x7-37-3
GUHS-2.6x7-37-4
GUHS-2.6x7-37-6
GUHS-2.6x7-37-8
GUHS-2.6x7-38-3
GUHS-2.6x7-38-4
GUHS-2.6x7-38-6
GUHS-2.6x7-38-8
GUHS-2.6x7-39-3
GUHS-2.6x7-39-4
GUHS-2.6x7-39-6
GUHS-2.6x7-39-8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
3
4
6
8
388
305
238
188
399
313
244
192
409
321
250
197
419
328
256
201
430
336
262
206
440
344
268
210
451
352
273
214
461
360
279
219
472
368
285
223
776
609
459
375
797
625
470
384
818
641
481
393
838
656
493
402
859
672
504
410
880
688
515
419
901
704
527
428
922
720
538
437
943
736
549
446
14
GUHS-2.6x7-14-3
GUHS-2.6x7-14-4
GUHS-2.6x7-14-6
GUHS-2.6x7-14-8
3
4
6
8
15
GUHS-2.6x7-15-3
GUHS-2.6x7-15-4
GUHS-2.6x7-15-6
GUHS-2.6x7-15-8
16
17
4"
18
ROLLERS HIGH
19
BETWEEN FRAME WIDTH
20
3/4"
21
4"
22
ROLLERS LOW
(Optional)
23
LOAD CAPACITY CHART
24
Frame Capacity
Roller Capacity
Max. Uniformly
Distributed Load
Max. Load
Per Roller
25
650
26
31
32
33
34
35
36
37
38
39
Note: Also available with 9 in. or 12 in. roller centers.
Frame - 4 in. deep x 1 1/2 in. flange x 7 ga. painted steel channel
with bolt-in cross members for rollers high, welded cross members
for rollers low.
Lengths - 5 ft. and 10 ft. straight sections.
Between Frame Widths - 13 through 39 in full one inch increments
(larger widths available).
Axles - 11/16 spring retained hex axle spaced on 3 in., 4 in.,
6 in., 8 in., 9 in. or 12 in. centers.
Rollers - 2 9/16 in. dia. x .180 wall steel tubing. Grease packed
plain ball bearings. Labyrinth shielded bearings optional.
- 137 -
(989) 358-7000
Gravity Conveyors
27
3
4
6
8
13
1/4"
5200
10'
GUHS-2.6x7-27-3
GUHS-2.6x7-27-4
GUHS-2.6x7-27-6
GUHS-2.6x7-27-8
10'
203
164
133
109
BETWEEN FRAME WIDTH
2100
5'
405
327
257
218
5'
3
4
6
8
5'
Roller
Centers
(inches)
GUHS-2.6x7-13-3
GUHS-2.6x7-13-4
GUHS-2.6x7-13-6
GUHS-2.6x7-13-8
■ Painted Steel Frames
10'
Model No.
2 9/16" Rollers
Roller
Centers
(inches)
Weights
(Lbs.)
Between
Frame
Width
Model No.
2 9/16" Rollers
Support
Centers
Weights
(Lbs.)
Between
Frame
Width
(Built to Your Specifications)
A
STYLE
B
C
1
BETWEEN FRAME WIDTH
2
3
4
Frame Capacity (lbs.)
Gravity Conveyors
Side Frame
2 x 1 1/2 x 3/16
2 1/2 x 1 x 12 ga.
2 1/2 x 2 x 3/16
2 1/2 x 2 x 1/4
3 x 4.1#
3 x 2 x 3/16
3 x 2 x 1/4
3 1/2 x 1 1/2 x 10 ga.
4 x 5.4#
4 x 3 x 5/16
5 x 1 1/2 x 7 ga.
5 x 6.7#
5 x 3 1/12 x 5/16
5 1/2 x 1 1/2 x 10 ga.
6 x 8.2#
8 x 11.5#
10 x 15.3#
10 x 20.0#
12 x 20.7#
15 x 40.0#
5' Supp.
850
1300
1700
2000
5800
2100
2800
3300
10000
6500
6800
16000
10000
5500
22000
43000
71000
83000
113000
180000
10' Supp.
200
350
420
550
1400
580
960
1200
3300
2900
3400
6600
5000
2400
11000
21000
35000
41000
56000
92000
Standard Information
■ Wide variety of side frames built to specified width
and length requirements. Additional frames
available.
■ Welded rigid construction
■ Gravity rollers from 1 in. through 8 in. dia.
(See roller selection chart.)
■ Roller spacing: 1 1/2 in., 3 in., 4 in., 6 in. typical.
Other spacing available.
Other Options
■ Curves with Straight or Tapered Rollers
■ Spurs
■ Manual or Power Operated Stops
■ Friction Brakes
■ “H” Type Leg Supports
- 138 -
(989) 358-7000
Gravity Rollers
1 3/8" O.D. x 18 ga.
1/4" Hex
1 3/8" O.D. x 16 ga.
5/16" Rd.
1 3/8" O.D. x 3/16" wall
5/16" Hex
1 3/8" O.D. x 3/16" wall
7/16" Hex
1.9" O.D. x 16 ga.
7/16" Hex
1.9" O.D. x 13 ga.
7/16" Hex
1.9" O.D. x .145 wall
7/16" Hex
2" O.D. x 16 ga.
7/16" Hex
2 1/4" O.D. x 9 ga.
5/8" Hex
2 1/2" O.D. x 13 ga.
7/16" Hex
2 1/2" O.D. x 11 ga.
7/16" Hex
2 1/2" O.D. x 11 ga.
5/8" Hex
2 1/2" O.D. x 11 ga.
11/16" Hex
2 9/16" O.D. x .180 wall
11/16" Hex
3 1/2" O.D. x .180 wall
11/16" Hex
3 1/2" O.D. x .300 wall
1 1/16" Hex
3 1/2" O.D. x .300 wall
1 7/16" Rd.
4" O.D. x 1/2" wall
1 7/16" Rd.
5" O.D. x 3/4" wall
1 7/16" Rd.
5" O.D. x 3/4" wall
1 11/16" Rd.
5 9/16" O.D. x 3/4" wall
1 11/16" Rd.
2 7/16" Rd.
7 5/8" O.D. x 7/8" wall
1 11/16" Rd.
7 5/8" O.D. x 7/8" wall
2 15/16" Rd.
8" O.D. x 1" wall
2 15/16" Rd.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Pin or Ring
Spring
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Between
Frame
Ranges
(inches)
Spring/Pin
6-27/Opt.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Roller
Capacity
at
Optimum
B.F.*
60 lbs.
7-39/Opt.
120 lbs.
8-39/Opt.
94/120 lbs.
6-39/Opt.
150 lbs.
7-39/Opt.
150 lbs.
7-53/7-53
260/290 lbs.
7-56/3-63
260 lbs.
7-56/3-63
300/585 lbs.
7-53/7-53
290 lbs.
8-57/3-75
450 lbs.
7-56/3-63
290 lbs.
7-56/3-63
290 lbs.
7-56/3-75
580 lbs.
7-56/3-75
580/650/700 lbs.
7-56/3-75
580/650/2226 lbs.
7-56/3-75
580 lbs.
N.A./3-99
1040/4130 lbs.
N.A./4-120
6172 lbs.
N.A./4-120
6172 lbs.
N.A./4-120
6172 lbs.
N.A./4-120
7836 lbs.
N.A./4-120
7836 lbs.
N.A./4-120
12,550 lbs.
N.A./4-120
7836 lbs.
N.A./4-120
15,878 lbs.
N.A./4-120
15,878 lbs.
*Multiple roller capacities indicate multiple bearing options.
Standard Information
Other Options
■
Roller diameters from 1 in. through 8 in.
■
Tapered Rollers
■
Pin or spring retained axle
■
Heat-Treated Rollers
■
Various bearing options
■
Urethane Coated Rollers
■
Quick delivery
■
Rollers with Plastic, Nylon, or Wood Bearings
■
Aluminum, Galvanized Steel, Stainless Steel
or P.V.C. Rollers
Note: The above list is an overview of general sizes
available. For a complete size listing and more detailed
roller information, see our “Roller and Bearing Section”.
- 139 -
(989) 358-7000
Gravity Conveyors
6 1/2" O.D. x 7/8" wall
■
■
Axle
Retention
Regreaseable
5/16" Hex
Sealed
1" O.D. x 16 ga.
Shielded
Axle Size
Plain
Tube
Diameter x Wall Thickness
Non-Replaceable
Bearing Options
Flow Rail
STYLE 1
STYLE 4
1 5/16"
2 1/2"
2 3/8"
1 3/4"
2 3/4"
2 1/4"
STYLE 2
1 13/16"
STYLE 5
3"
2 3/8"
2 7/8"
1 29/32"
2 1/4"
3/8"
LOAD CAPACITY CHART
STYLE 3
Support
Centers
Style 1
3'
4'
5'
6'
7'
8'
10'
179
100
62
36
22
15
7
2 1/2"
2 13/16"
Maximum Load Per Foot
Style 2 Style 3 Style 4
200*
168
107
74
54
42
23
200*
200*
200*
166
104
70
35
Style 5
400
278
142
82
51
34
17
200
200
144
83
52
35
18
* Wheel capacity is limiting factor.
■ 12 ga. galvanized steel frames
■
■
■
■
1 15/16 in. dia. wheels
Wheel capacity = 50 lbs.
Wheels are on 3 in. centers
Style 4 is also available with wheels staggered
Pallet Rail
Gravity Conveyors
STYLE 1
3 3/4"
2"
STYLE 3
1 1/2"
5 1/4"
3 1/2"
3 3/4"
1 1/2"
1 1/2"
STYLE 2
STYLE 4
3 3/4"
5 1/4"
4 1/4"
3 3/4"
1 1/2"
1 1/2"
■
■
■
7/8"
■
■
7 ga. painted frames
2 1/4 in. dia. wheels
Wheel capacity = 290 lbs.
- 140 -
Wheels available on 3 in., 6 in. or 12 in. centers
Frame capacity (uniformly distributed load)
300 lbs./ft. with supports on 5 ft. centers
(989) 358-7000
Conveyor Supports
TRIPOD LEG SUPPORT
■ For skatewheel or 13/8 in. dia. roller conveyor.
Top of Leg
A
D
J
U
S
T
M
E
N
T
S
11"-17"
17"-29"
23"-39"
29"-51"
39"-71"
“H” TYPE LEG SUPPORT (Bolt Together Construction)
■ For skatewheel, 1 3/8 in., 1.9 in., 2.5 in. or 2.6 in. dia.
roller conveyors.
■
Light duty and medium duty bolt together leg supports
are constructed of 3 in. x 12 ga. formed channel.
■
Heavy duty bolt together leg supports are constructed of
3 in. x 7 ga. formed channel.
1.9" Roller
Conveyor
Top of Leg
Gravity Conveyors
A
D
J
U
S
T
M
E
N
T
S
6" - 8"
8" - 10"
10" - 12 1/4"
12 1/4" - 16 1/4"
14 1/4" - 20 1/4"
18 1/4" - 24 1/4"
22 1/4" - 28 1/4"
26 1/4" - 32 1/4"
30 1/4" - 42 1/4"
38 1/4" - 50 1/4"
46 1/4" - 58 1/4"
54 1/4" - 66 1/4"
62 1/4" - 74 1/4"
70 1/4" - 82 1/4"
Skatewheel,
1 3/8", 2.5" & 2.6"
Roller Conveyor
Top of Leg
------------12 1/4" - 16 1/4"
14 1/4" - 20 1/4"
18 1/4" - 24 1/4"
22 1/4" - 28 1/4"
26 1/4" - 32 1/4"
30 1/4" - 42 1/4"
38 1/4" - 50 1/4"
46 1/4" - 58 1/4"
54 1/4" - 66 1/4"
62 1/4" - 74 1/4"
70 1/4" - 82 1/4"
“H” TYPE LEG SUPPORT (Welded Construction)
■
Selection of 3 in., 4 in., 5 in. or 6 in. structural channel
supports dependent upon load requirements.
■
Optional knee braces
■
Casters available with 4 in. or 6 in. wheels
- 141 -
(989) 358-7000
Gravity Conveyors
- 142 -
(989) 358-7000

Gravity Conveyor Catalog

Transcription

Similar documents

Gravity Conveyor

MAN-10100 - Shelbourne Reynolds