Gear Pumps and Motors
Transcription
Gear Pumps and Motors
MAKING MODERN LIVING POSSIBLE Ph Technical Information ed as Gear Pumps and Motors tP Ou cts du ro powersolutions.danfoss.com Technical Information Gear Pumps and Motors Group 3 Ph Product Type Displacement (cc/rev) Max. pressure (bar) Continuous Peak Max. Speed (rev/min) Shaft / front flange available combinations 22.1 26.2 33.1 37.9 44.1 48.3 55.1 63.4 74.4 88.2 250 250 250 250 250 230 230 210 160 150 270 270 270 270 270 250 250 230 200 170 3000 3000 3000 2500 2500 2500 2300 2300 2300 2300 CI 01 CI 02 CI 03 CO 06 SC 07 SEP 3 Medium duty gear pump SEP 3/22 SEP 3/26 SEP 3/33 SEP 3/38 SEP 3/44 22.1 26.2 33.1 37.9 44.1 210 210 210 210 180 230 230 230 230 200 2500 2500 2500 2300 2300 CI 01 SC 01 CI 07 SC 07 SEU 3/22 SEU 3 SEU 3/26 Unidirectional SEU 3/33 gear pump SEU 3/38 SEU 3/44 22.1 26.2 33.1 37.9 44.1 210 210 210 210 180 230 230 230 230 200 2500 2500 2500 2300 2300 CO 01 SC 01 CI 07 SC 07 22.1 26.2 33.1 37.9 44.1 55.1 210 210 210 190 180 170 230 230 230 210 200 190 3000 3000 3000 3000 3000 3000 CI 01 CO 01 SC 01 CO 03 CI 07 SC 07 ed as SNP 3 Heavy duty side plates gear pump SNP 3/22 SNP 3/26 SNP 3/33 SNP 3/38 SNP 3/44 SNP 3/48 SNP 3/55 SNP 3/63 SNP 3/75 SNP 3/90 Ou TAM 22-90 Bidirectional gear motor TAM 22-90/22 TAM 22-90/26,5 TAM 22-90/33.5 TAM 22-90/38 TAM 22-90/44 TAM 22-90/55 CO 01 CO 02 CO 02 SC 06 SC 08 SC 01 SC 02 SC 03 CI 07 SC 09 tP Group 3 shaft / front flange combinations CI 01 11061402 11061402 11061402 • Rev• Rev AA• Rev AA AA SC 01 cts du ro 10 10 10 CO 01 10 11061402 • Rev BA • Sep 2013 Technical Information Gear Pumps and Motors CI 02 CO 02 SC 02 CI 03 CO 03 SC 03 SC 16 CI 07 ed as Ph Group 3 (continued) Ou CO 06 tP SC 07 SC 08 SC 09 du ro 11 1111 11061402 11061402 11061402 • Rev• AA Rev • Rev AAAA 11061402 11061402 11061402 • Rev• Rev AA• Rev AA AA 11061402 11061402 11061402 • Rev • Rev AA • Rev AAAA 11061402 • Rev BA • Sep 2013 cts 11061402 11061402 11061402 • Rev • Rev AA • Rev AA AA 11 11 11 11 11 1 111111 11 Technical Information Gear Pumps and Motors Group 4 Ph Product TAP 60-200 Standard gear pump Type Displacement (cc/rev) as TAP 60-200/60 TAP 60-200/85 TAP 60-200/106 TAP 60-200/130 TAP 60-200/148 TAP 60-200/160 TAP 60-200/200 Max. pressure (bar) Continuous Peak 250 250 235 220 210 170 150 270 270 250 230 220 180 160 60 85 106 130 148 180 200 Max. Speed (rev/min) Shaft / front flange available combinations 3000 3000 2500 2500 2400 2400 2400 CI 01 CO 01 SC 01 CI 02 SC 02 Group 4 shaft / front flange combinations CI 01 CO 01 SC 01 ed Ou CI 02 SC 02 tP 12 12 11061402 • Rev AA 11061402 • Rev• AA 11061402 Rev AA 11061402 11061402 • Rev• Rev AA AA cts du ro 12 12 12 12 11061402 • Rev BA • Sep 2013 Technical Information Gear Pumps and Motors Ph Multi-Stage Pumps Market Codes for Composition of Multi-Stage Pumps as Compressed Code First Stage Kit Middle Stage Kit Rear Stage ed tP Ou du ro cts Notes: To assembly tandem pumps consider first and rear stage; for triple pumps consider alt stages; for multi-stage pumps consider first stage, middle stages and rear stage. Above table shows the CO … 31 - CO … 41 standard configuration only, corresponding to CO … 01 of single pump; for different configurations of shaft and front flange, see the pages regarding single pumps. 11061402 • Rev BA • Sep 2013 11061402 • Rev AA 13 13 Technical Information Gear Pumps and Motors as Ph Multi-Stage Pumps with European Standard Front Flange (01): Typical Dimensions K = Coupling Kit ed Product Group 1 TFP 100 SNP 2 SNP 3 TAP 60-200 C mm TFP 100/1.2 TFP 100/1.7 TFP 100/2.2 TFP 100/2.6 TFP 100/3.2 TFP 100/3.8 TFP 100/4.3 TFP 100/6 TFP 100/7.8 75.5 77.0 79.0 81.0 83.0 85.0 87.0 93.5 100.0 37.8 75.5 38.5 77.0 39.5 79.0 40.5 81.0 41.5 83.0 42.5 85.0 43.5 87.0 46.8 93.5 50.0 100.0 SNP 2/4 SNP 2/6 SNP 2/8 SNP 2/11 SNP 2/14 SNP 2/17 SNP 2/19 SNP 2/22 SNP 2/25 87.5 91.0 95.0 99.0 105.0 109.0 113.0 119.0 123.0 43.3 45.0 45.0 49.0 52.0 52.0 56.0 59.0 59.0 SNP 3/22 SNP 3/26 SNP 3/33 SNP 3/38 SNP 3/44 SNP 3/48 SNP 3/55 SNP 3/63 SNP 3/75 SNP 3/90 TAP 60-200/60 TAP 60-200/85 TAP 60-200/106 TAP 60-200/130 TAP 60-200/148 TAP 60-200/180 TAP 60-200/200 87.5 91.0 95.0 99.0 105.0 109.0 113.0 119.0 123.0 D mm E mm F mm Coupling Kit Width K mm 37.8 77.0 38.5 78.5 39.5 80.5 40.5 82.5 41.5 84.5 42.5 86.5 43.5 88.5 46.5 95.0 50.0 101.5 37.8 38.5 39.5 40.5 41.5 42.5 43.5 46.5 50.0 TFP 100 + TFP 100 SNP 2 + TFP 100 SNP 2 + SNP 2 SNP 3 + TFP 100 SNP 3 + SNP 2 SNP 3 + SNP 3 TAP 60-200 + TFP 100 TAP 60-200 + SNP 2 TAP 60-200 + SNP 3 TAP 60-200 + TAP 60-200 22.5 27.0 23.5 25.0 23.5 25.0 - 43.3 45.0 45.0 49.0 52.0 52.0 56.0 59.0 59.0 43.3 45.0 45.0 49.0 52.0 52.0 56.0 59.0 59.0 93.0 96.0 100.5 104.5 110.5 114.5 118.5 124.5 128.5 126.0 129.0 134.0 137.5 142.0 146.0 150.0 156.0 164.0 174.0 63.0 64.5 67.0 68.8 71.0 72.5 75.0 78.0 82.0 87.0 176.0 188.0 194.0 203.0 210.0 222.0 230.0 88.0 93.0 97.0 101.5 105.0 111.0 115.0 126.0 129.0 134.0 137.5 142.0 145.0 150.0 156.0 164.0 174.0 63.0 64.5 67.0 68.8 71.0 72.5 75.0 78.0 82.0 87.0 132.5 135.5 140.5 144.0 148.5 151.5 156.6 162.5 170.5 180.5 63.0 64.5 67.0 68.8 71.0 72.5 75.0 78.0 82.0 87.0 176.0 186.0 194.0 203.0 210.0 222.0 230.0 88.0 93.0 97.0 101.5 105.0 111.0 115.0 174.5 184.5 192.5 201.5 208.5 220.5 228.5 88.0 93.0 97.0 101.5 105.0 111.0 115.0 Examples of overall length calculation: yy Tandem pump SNP 3/44 + TFP 100/3.2 A = 142.0 mm K = 23.5 mm E = 84.5 mm LTOT = 142 + 23.5 + 84.5 = 250 du ro Group 4 B mm tP Group 3 A mm Ou Group 2 Type yy 4 stage pump SNP 3/55 + SNP 2/17 + SNP 2/8 + TFP 100/2.2 A = 150 mm K = 25.0 mm (1st kit) C = 109.0 mm (2nd stage) K = 0.0 mm (2nd kit) C = 95.0 mm (3rd stage) K = 27.0 mm (3rd kit) E = 80.5 mm cts LTOT = 150.0 + 25.0 + 109.0 + 0.0 + 95.0 + 27.0 + 80.5 = 486.5 mm 14 11061402 • Rev BA • Sep 2013 Gear Pumps and Motors Single Pumps and Motors Example SN M 2 FL / 19 S SC 06 YWA 1R Series Product type Group Speciel Configuration as Ph Technical Information Displacement ed Rotation D = Clockwise S = Anticlockweise Shaft type Front flange configuration Special code for extra-catalogue configurations Ou Example P N N B 19+11+ 4.3 D SC 4 6 WAT 1 G Product 2nd Stage Group 3rd Stage Group Rotation D = Clockwise R = Anticlockwise Shaft type Spacer flange Front flange configuration du ro Displacement 1st Pump 2nd Pump 3rd Pump 1st Stage Group tP B = TFP 100 N = SNP 2 R = SNP 3 F = TAP 60-200 Special code for extra-catalogue configurations cts 11061402 • Rev BA • Sep 2013 15