Stainless Can Seaming Machines V 110 SVA

Stainless
Can Seaming Machines
V 110 SVA
V110 SVA 30/30.2/40/50/50.2/100
This machine incorporates the most modern
technology, and is designed with experience
gained over many years, from the supply of
over 100,000 seaming machines, to both can
manufacturers and can fillers.
The Lanico SVA is a fully automatic can seaming
machine manufactured from stainless steel. It
can operate as a stand-alone unit or in combination with a filling machine. In the stand-alone
version, the product in and out feed heights
remain unchanged, enabling product height
changes to be done simply by raising or lowering
the machine head. Infeed and discharge
conveyors are available as optional extras.
Special change parts are available to make
diameter changes quick and easy.
When this seamer is combined with a filler, modifications are possible which enable the combination to be both compact and economic.
The models SVA 60E/40E are designed as a
seaming module to be integrated into filling
machines.
Typical uses for the Lanico SVA include low
volume production and laboratory applications.
• Fully stainless steel design including the
electrical cabinet.
• Hygienic and economic.
• Cans and ends are fed automatically.
• Heavy duty bearings in the seaming rollers.
• The drive system is enclosed with all parts
running in an oil bath.
• Low maintenance requirement.
• Touchpanel with text display.
• Frequency controlled motor drive.
• PLC (Siemens)
• Protection covers made from Makrolon.
• The design conforms to all relevant CE
regulations.
• Infeed and discharge conveyors
• Steam injection system
• Gas injection system
• Roller for machine transport.
• Recipe Management System
• Inkjet optional
Process description
Filled cans are taken via a controlled rotary system
to the seaming head. At the same time a lid is taken
from the end magazine and is also fed to the seaming
head. An air cylinder then raises both the can and its
lid to the seaming position, the can is spun, and the
seaming operation is then completed automatically
by two seaming rollers. Model SVA 50 and 60 is
equipped with 4 rollers, SVA 100 got 8 seaming rollers.
After seaming is completed the can is lowered and
fed onto the discharge conveyor, simultaneously the
next can to be seamed is fed into the seamer together
with its lid.
The change parts are designed to enable changeovers
to be done very quickly. Diameter changes can be
done in less than 10 minutes and height changes in
2 minutes. On request a motorized system is available
for height changes.
SVA 30
Machine with clocked can transport, thus particularly
suitable for dry, granular and lumpy bulk solids, bakery
items and all kind of powder, filled into tinplate, card
board and plastic cans.
In “W” version also suitable for paste-like products.
Machine shown with optional infeed- and discharge
conveyor.
SVA 40
Particularly designed for seaming large dimensioned cans up to 190 mm diameter. Usually
used for dry, granular and lumpy bulk solids,
bakery items and all kind of powder, similar to
the model SVA 30.
SVA 50 W
Seaming Machine with continuous can
transport, thus particularly suitable for liquid
and paste like products such as hot filled soup,
Feta cheese, pastry, meat or overfilled Wiener
sausages in brine.
On request, the machines can be equipped
with a steaming device in order to achieve an
aseptic headspace and, furthermore, a slight
vacuum.
SVA 50 T
Automatic Seamer, similar to model SVA 30,
but due to the use of 4 seaming rollers with
considerably increased output.
This machine is specially recommended for
granular and lumpy bulk solids, bakery items
and all kinds of powder.
On request, the machine can be equipped
with a gassing device and, thereby, is perfectly
adapted for oxygen sensible products.
SVA
Perfect machine for seaming composite cans
SVA
SVA 40 E/60 E
seaming module designed to
be integrated into
filling machines
SVA 60 E, Seaming Module
Accessories
Gas injection system
Steam injection system
SVA 50.2/30.2
Both models are equipped with 2 seaming
A typical application is seaming cans with milk
stations, thus increasing the operation speed
powder, bakery and nuts.
considerably compared to the types SVA 30
4 (SVA 30.2) or 8 seaming rollers (SVA 50.2)
and SVA 50T.
perform a perfect double seam.
The double head machines are particularly
Optionally, the machines can be equipped with
suitable for seaming tinplate, plastic and card
a gassing device.
board cans under dry working conditions.
SVA Destacker
SVA 50.2
Higher output, in particular for liquid filling, can be achieved by combining 2 seaming machines.
Set of Change Parts
Change parts
The seaming rollers are mounted and preset on a
special lever system. When a diameter change is
carried out the whole lever system is exchanged
thus reducing the normal lengthy setting time.
The exchange of the lid feeding magazine, the
seaming chuck, the infeed rotary system, and
SVA 30
SVA 100
SVA 50
guides, can be done in a few minutes.
Machines with Gassing Device
The machines from the SVA series are optionally
available with gassing device in various versions:
•
gassing with lance injection, especially for granular and lumpy bulk solids
•
gassing tunnel and -ring for headspace gassing, suitable for all products
•
evacuating and gassing before entering the seaming station, for powder
Gassing by Needle-Nozzels with SVA 50
SVA 40
SVA 50.2
**
60
100
E
E
60
40
100
50
40
60
SVA
50
SVA
SVA
40
SVA
SVA
30
SVA
SVA
30
50.
30.
2
2
W
50
SVA
50
SVA
30
40
T
W
T
SVA
*
30
Machine Model
100
56-113 56-113 73-190 56-113 56-113 56-113 56-113 73-190 56-113 56-113
**
45-250 45-250 45-250 45-250 45-250 45-250 45-250 45-250 45-250 45-250
Wet Canning
-
•
-
-
•
-
-
°
°
•
Dry Canning
•
•
•
•
•
•
•
•
•
•
Verschließstation
1
1
1
1
1
2
2
1
1
2
Steaming
°
°
°
°
°
°
°
°
°
°
Gassing
-
°
-
-
°
-
-
°
°
°
Infeed-/Discharge Conveyor
°
°
°
°
°
°
°
°
°
°
Touchpanel b/w
•
•
•
•
•
•
•
•
•
•
Touchpanel colour
°
°
°
°
°
°
°
-
-
°
Express Dia-Change
•
•
•
•
•
•
•
•
•
•
Height Change, mechanically
•
•
•
•
•
•
•
•
•
•
Height Change, automatically
°
°
°
°
°
°
°
-
-
°
Active Aircon for Cabinet
°
°
°
°
°
°
°
°
°
°
PLC Siemens S7
•
•
•
•
•
•
•
-
-
•
Touch panel 5,7“
•
•
•
•
•
•
•
-
-
•
F-drive
•
•
•
•
•
•
•
-
-
•
RMS 149 Recipe Management
°
°
°
°
°
°
°
-
•
•
PROFI BUS
•
•
•
•
•
•
•
-
-
•
* depending od head space and product
** other sizes on request
• = included
° = optional
- = not available
History
Since our foundation in the year 1919 LANICO
continues to produce machines for the can
making and canning industry and has become
one of the leaders in the field of general line can
making equipment.
Today LANICO holds a major market share
for necking-, flanging- and seaming machines
especially for the production of 3-piece-aerosol
rectangular cans.
Another main field is the supply of fully
stainless can seaming machines.
To achieve the future technological and quality
requirements of our customers, LANICO has
successfully installed a quality management
system according to DIN EN 9001, certified
from 1995 on. LANICO was granted the
Certification of Approval for the latest Quality
Management System Standards DIN EN ISO
9001:2008 in July 2001, valid until 2013, thus
being one of the first companies to comply
with the latest standards.
4 / 2011 Subject to changes without notice
Contact
Lanico-Maschinenbau Otto Niemsch GmbH
Postfach 3065
D-38020 Braunschweig
fon:
fax:
+49 (0) 531 / 8 09 06-0
+49 (0) 531 / 8 09 06-27
Broitzemer Straße 25 - 28
D-38118 Braunschweig
mail:
net:
[email protected]
www.Lanico.de
DIN EN ISO 9001: 2008