Price - Intelligent Building Controls
Transcription
Price - Intelligent Building Controls
Intelligent Building Controls Ltd. Temperature Valves Damper Actuators Humidifiers Pressure Flow Air – CO2 Gas Water Heaters I/O Modules Frequency Converters Specialists in BeMS Measurement & Control www.intelcontrols.com New products for 2013 Trend VSD2H Page 34 Delivering Energy & Cost Savings to You. - Premier supplier of Building Energy Management Systems, Control & Measurement Products - Intelligent Building Controls Ltd (IBC) is a premier supplier of high quality Building Energy - Management Systems, Control and Measurement - Products. We place major emphasis on providing our customers with the Easy installation at lower cost: Compact & Flexible it is quick and easy to install reducing your installation costs. Fast Payback: Usually less than 2 years and could be as little as 3 months. Easy to Use: Easy to use keypad gives you complete control & a real time clock time stamps faults alarms & events. Easy to integrate: Appears as a standard Trend Device on your network, simply by adding an optional LAN or Trend Ethernet card. Extra Features: Features such as such as ramp time optimisation, anti-resonance sweeping and intelligent motor control help to protect your HVAC system extending its life and reducing maintenance costs. highest quality products possible, with energy efficiency being at the Trend Heat Meters core of the business model. Our products are sourced globally from Page our well established and experienced 26 manufacturer base unit whom we have built strategic relationships with over the Information past twenty about each years. of our Key Feature: The ability to read the meters remotely negates to visit the individual locations & collect readings manually saving time & resource. manufacturers is detailed on the page (I) of this catalogue. Our objective is to ensure that the products we supply will enable our customers to operate the most cost Other Features: - effective energy efficient building possible All your BeMS requirements can be sourced here at IBC as we stock a wide range of products designed to suit the needs of each - Electronic Sensor Control for recording flow rate. Available in normal flow rates from 0.6 to 10m3/h DN15 & DN20 meter versions with direct electronic impeller scanning DN23 & DN40 versions with magnetic coupling for electronic scanning of sensor disc 10 year battery life Primary Interface :M-Bus interface to EN1434-3 Optical ZVEI interface to IEC 870-5 Adjustable reading date for billing Windows-based HYDRO-SET software for optimum adaption to user-specific updates individual customer. Phone: +353 1 45 75 241 Email: [email protected] Specialists in BeMS Measurement & Control www.intelcontrols.com Intelligent Building Controls are Exclusive Distributors for: Trend (T) Trend is one of the world’s leading BEMS manufacturers, with a worldwide distribution and support network covering over 50 countries. Its fully integrated flexible control solutions can deal with the most complex requirements of modern buildings. Through close control and monitoring of heating, ventilation, air conditioning and other building services, Trend systems are able to minimise energy consumption and maintain consistently comfortable conditions – as well as bringing other key benefits such as lower plant maintenance costs. IBC is the sole supplier of Trend in Ireland. Dristeem (D) Dristeem design and manufacture humidification systems to meet customer’s unique humidification requirements. Dristeem have earned their reputation as the humidification experts by supporting customers' unique commercial, health care, industrial, and process-critical applications for over 45 years. Through their continued extensive research and development efforts, Dristeem continue to develop industry-leading innovations that greatly improve methods for adding moisture to air with precise control. All of their products are focussed around energy efficiency, for example Dristeems Insulating Tubing option dramatically reduces energy and water saving costs for the customer. Industrie Technik (I) Industrie Technik has been a manufacturer of control equipment and measuring instruments for the most diverse applications in building automation systems, heating, air-conditioning, ventilation and refrigeration systems, and in air treatment units and fan-coil systems for over 30 years. They offer a full and widely diversified range of products for electrical, electronic and electromechanical applications allowing you to monitor temperature, pressure, humidity, air quality and flow control. Air Monitor Corporation (AM) Founded in 1967, Air Monitor Corporation is a manufacturer of innovative flow management instrumentation and provider of application driven engineered solutions to the critical health care, laboratory, industrial process and power generating industries. Air Monitor has a full complement of airflow measuring and control product offerings that are guaranteed to meet each customer’s performance requirements. Air Monitor also design their systems to optimally meet the critical needs of each individual customer’s HVAC airflow operation. Instanta (In) Instanta is the leading UK manufacturer of water boilers for making hot drinks. Established in 1957 Instanta continues to go from strength to strength through offering a combination of service, quality and exceptional value for money. Their aim is to provide beverage making equipment with designs that combine style with practicality. Phone: +353 1 45 75 241 Email: [email protected] I Specialists in BeMS Measurement & Control www.intelcontrols.com Seitron (S) Seitron began as a small company in 1981 and has expanded exponentially since then and now exports to over 60 countries globally. Seitron offers more than 450 products, including programmable thermostats, digital chronostats, phone interfaces, wireless thermostats, climate regulators, gas leakage detectors and lots more. Seitron has always given particular attention to the quality of its products, and this was confirmed by the Quality Certification ISO 9001 obtained in 1999, a recognition of Seitron’s constant improvement. Joventa (J) Joventa manufactures reliable and accurate electric damper-actuator motors that have been specially designed to meet the need of many industrial applications. Extremely thorough testing of every single Joventa actuator ensures that customers can always enjoy total reliability under any circumstances. The complete range of actuators extends from 4Nm to 40Nm and is designed to fit any spindle and where necessary can incorporate the SLC system to provide remote supervision of damper actuator functions. Perry Electric (P) Perry Electric develops and manufactures devices for the control of time, energy, comfort, temperature, gas safety and home automation with the innovative wireless PDA (Perry Domotics Assistance) system. PDA is a room temperature control system which allows the user to obtain significant savings on the heating costs. Significant savings in energy bills, installation costs, and ease of use make this a significant product range. Greystone (G) Greystone is one of North America's largest ISO registered manufacturers of HVAC sensors and transducers for Building Automation Management Systems. They design and manufacture a wide range of products for sensing measurement and transmittal of data related to temperature, humidity, pressure, current, air quality, and hazardous gases. Greystone have conscientiously established a worldwide reputation as an industry leader by maintaining leading-edge design technology, prompt technical support, and a commitment to on-time deliveries. Their Quality Management System is ISO 9001 certified, assuring customers of consistent product reliability. Johnson Controls (JC) Johnson Controls is a leading provider of equipment, controls and services for heating, ventilating, air-conditioning, refrigeration and security systems. From design to manufacturing to delivery, these products, services and solutions incorporate sustainability features that help customers be more energy-efficient. Johnson Controls manufacture valves in response to the ever changing needs of the heating, ventilating and air conditioning industry having one of the largest selections of valves and actuators available. Phone: +353 1 45 75 241 Email: [email protected] II Specialists in BeMS Measurement & Control www.intelcontrols.com Temperature Valves Pages 1-4 Pages 5-12 Damper actuators Miscellaneous Humidity Page 13 Pages 14-16 Page 17 Humidifiers Pages 18-21 Pressure Pages 22-24 Flow Page 25 Air-CO2 Page 26 I/O Modules Gas Pages 27-28 Page 29 Boiling, Chilled & Hot Water Pages 30-32 Frequency converters Pages 33-34 Phone: +353 1 45 75 241 Email: [email protected] III Specialists in BeMS Measurement & Control www.intelcontrols.com Gas Humidifiers (lowest operating cost)................................................................ 20 Table of Contents Steam Heat Exchanger Humidifier ......................................................................... 20 Temperature Sensors & Controllers ................................................ 1 Room temperature sensors .................................................................................... 1 Immersion Temperature sensors ............................................................................ 1 Accessories for immersion temperature sensors .................................................... 1 Duct temperature sensors ...................................................................................... 2 Ultra-Sorb LH & LV Steam Dispersion Panel.......................................................... 21 Single Dispersion Tubes & Accessories .................................................................. 21 Ultra-Sorb XV Steam Dispersion Panel................................................................... 21 Rapid-Sorb Steam Dispersion Panel....................................................................... 21 Pressure .................................................................................................... 22 Outside temperature sensors ................................................................................. 2 Liquid Differential Pressure Switch/Sensors .......................................................... 22 Strap-on temperature sensors ................................................................................ 3 Air Differential Pressure Switch ............................................................................. 22 Flue gas temperature sensors ................................................................................. 3 Liquid Pressure Sensors ......................................................................................... 23 Averaging temperature sensors .............................................................................. 3 Liquid Pressure Transducer ................................................................................... 23 Wireless temperature control system..................................................................... 3 Air Differential Pressure Sensors ........................................................................... 23 Fan controllers ........................................................................................................ 4 Aluminium Lo-Flo Pitot Traverse ........................................................................... 24 Valves .......................................................................................................... 5 Zone valves with 2.5 stroke & actuators ................................................................. 5 Zone valves & actuators .......................................................................................... 5 Zone Valves with 6.5 stroke & Actuators ............................................................... 6 S.A.P. Static Air Probe ............................................................................................ 24 Low Pressure Transducers ..................................................................................... 24 STAT - Probe Static Pressure.................................................................................. 24 Flow ............................................................................................................ 25 Plant Valves/Actuator with 6.5mm Male Threaded ................................................ 7 Air/Liquid Flow Switches ....................................................................................... 25 Linear Plant Valves & Actuators .............................................................................. 8 FAN-E airflow Measuring Station ........................................................................... 25 Plant Actuators ....................................................................................................... 9 Air Velocity Sensor, Duct ....................................................................................... 25 Linear Plant Valves & Actuators ............................................................................ 10 Butterfly Valves & Actuators……………………………………………………………………………….11 Air - CO2-CO Sensors ............................................................................ 26 Shoe Valves………………………………………………………………………………………………………12 Air Quality Sensors ................................................................................................ 26 Air Damper Actuators……………………………………………………………………………………….12 Wind Speed Sensor................................................................................................ 26 Damper actuator .................................................................................... 13 CO Sensors ............................................................................................................ 26 Damper actuators ................................................................................................. 13 Combined CO2 Sensors ......................................................................................... 26 Miscellaneous I/O Modules ........................................................................................ 14 ............................................................................................ 27 Frost thermostats ................................................................................................. 14 Input & Output Modules ....................................................................................... 27 Duct thermostats .................................................................................................. 14 Current Transformers ............................................................................................ 27 Immersion thermostats ........................................................................................ 14 Thyristor Controllers.............................................................................................. 27 Room/Outside thermostats .................................................................................. 15 Current Transducers .............................................................................................. 27 Strap-on thermostats ............................................................................................ 15 Split Core Current Sensors ..................................................................................... 28 Capillary thermostats ............................................................................................ 15 Meters ................................................................................................................... 28 Occupancy detectors ............................................................................................ 15 Electricity Meter .................................................................................................... 28 Light level sensor .................................................................................................. 16 Gas Safety Equipment Level regulator ...................................................................................................... 16 Gas cut-off valves .................................................................................................. 29 Movement detectors ............................................................................................ 16 CPI Switches .......................................................................................................... 29 Rain detectors ....................................................................................................... 16 Gas Detection Systems .......................................................................................... 29 Humidity ................................................................................................... 17 Boiling, Chilled & Hot Water ............................................................. 30 Humidity and Temperature Sensors ..................................................................... 17 Wall mounted boilers & cup carousel.................................................................... 30 Combined Sensors ................................................................................................ 17 Counter top boilers & steam & water boilers ........................................................ 31 Duct and Room Hygrostats ................................................................................... 17 Under the counter hot water dispenser & chiller .................................................. 32 Humidifiers .............................................................................................. 18 Manual fill water boilers ........................................................................................ 32 Electric Resistance Humidifiers ............................................................................. 18 Frequency Converters .......................................................................... 33 ......................................................................... 29 Electrode Steam Humidifiers ................................................................................ 18 VSD2H series ......................................................................................................... 33 Electrode Steam Humidifiers Cylinder................................................................... 19 NXL series .............................................................................................................. 34 Steam blowers ...................................................................................................... 19 Accessories ............................................................................................................ 34 Phone: +353 1 45 75 241 Email: [email protected] Specialists in BeMS Measurement & Control www.intelcontrols.com Temperature Sensors & Controllers Room Temperature Sensors Immersion Temperature Sensors Room sensors and transmitters with a variety of sensors. Many units below include the display, so please check the description. Sensor types below are 10k3A1, PT100, 10K4A1 or NTC10K. Others can be special ordered such as NTC1K8, NTC100K, Ni1000, PT1000 or Transmitter with 4…20 mA outputs. Part # Description BMS SP02I20 Temperature sensor for room, 4…20mA, Display, Setpoint adjustable (G) €43 SP02V10 Temperature sensor for room, 0…10V, Display, Setpoint adjustable (G) €43 TE200-A-24 Space Temp Sensor, 10,000 Ohms, type 2, NTC Thermistor, ±0.2°C, micro enclosure (G). TB/TS Space Temperature Sensor, Temp. range: 0...40C (T) TB/TS/K Space Temperature Sensor + Knob (T). TB/TS/KO Space Temp Sensor + Knob + Over ride button (T) Alerton, Distech, Trend, Cyclon Trend, Cyclon Trend, Cyclon Trend, Cyclon DTB/PT Room temperature sensor, PT100, 20…+60°C, IP30 (I) Serck, Siemens DTB/10K3 Room temperature sensor, NTC 10K3A1, Trend, -20…+60°C, IP30 (I) Cyclon Space Temp Sensor, (IP65 Metal Housing) -10…40 °C (T). T/TS T/TFR-4/10 Flying Lead Sensor (4 metres) Pack of 10, range -10…50°C (T) Immersion sensors and transmitters with a variety of resistive sensors. Many units below include the pocket , so please check the description an if necessary choose either a brass of stainless steel pocket to be added to the order. Sensor types below are 10k3A1, PT100, 10K4A1 or NTC10K. Others can be special ordered such as NTC1K8, NTC100K, Ni1000, PT1000 or Transmitter with 4…20 mA outputs. Price Part # Description BMS Price TB/TI-S Duct/Immersion Temperature Standard (145mm) -30…110c (T) Trend, Cylon €17 TE200-C-EI24C2E 10,000 Ohms, type 2, NTC Thermistor, ±0.2°C, Alerton, Distech, Trend, Cylon (G) Trend, Cylon €14 STI14 Temperature sensor, for immersion, 20…120°C, 10K3A1 sensor, IP65, resistive, with pocket, Cyclon/Trend BMS type (I) Trend, Cylon €23 STI15 Temperature sensor, for immersion, 20…120°C, 10K4A1 sensor, IP65, resistive, with pocket (I) Andorer, Delta €23 STI21 Temperature sensor, for immersion, Serck, 20…120°C, PT100 sensor, IP65, resistive, Siemens with pocket (I) €25 TTI012 Temperature transmiter for immersion, -30…50°C, 0…10Vdc output, ±1.5°C, IP65 (I) €58 TTI013 Temperature transmiter for immersion, 0…100°C, 0…10Vdc output, ±2°C, IP65 (I) €58 €5 €8 €19 €26 €14 €12 Trend, Cyclon €46 Trend, Cyclon €79 Accessories for Immersion Temperature Sensors Pocket for immersion temperature sensors allows you to mount a sensor on a pipe. Depend of your needs and the fluid in which the sensor is immerged, you can choose between a brass body or a stainless steel body. Part # Description POC/B/6 6 mm Brass Pocket & compression fitting for all T/PI & TB/TI Immersion sensors (T) €11 POC/SS/6 6 mm SS Pocket & compression fitting for all T/PI & TB/TI Immersion sensors (T) €22 Phone: +353 1 45 75 421 Email: [email protected] Price 1 Specialists in BeMS Measurement & Control www.intelcontrols.com Temperature Sensors & Controllers Duct Temperature Sensors Outside Temperature Sensors Duct temperature sensors and transmitters. Many different probes are available such as 10k4A1, PT100 & NTC10k2. Up to 400mm probe. Depending on your needs, 2 kinds of outputs are available on the transmitters: 0…10V or 4…20mA. Please contact us if you require other particular material such as other probes or outputs. Part # Description BMS Price TB/TI-L Insertion Temperature Sensor for Duct Applications - Long (400mm) -30…110c (T) Trend, Cylon €19 TB/TI-S Duct/Immersion Temperature Standard (145mm) -30…110c (T) Trend, Cylon STC14 Temperature sensor, for duct, -20…80°C, 10K3A1 sensor, IP65, resistive (I) TE200B24E2 Temperature sensor, for duct, -20…105°C, NTC10K2 sensor, IP65, resistive (G) Trend, Cylon STC15 Temperature sensor, for duct, -20…80°C, 10K4A1 sensor, IP65, resistive (I) Trend, Cylon STC21 Temperature sensor, for duct, -20…80°C, PT100 sensor, IP65, resistive (I) Trend, Cylon TTC012 Temperature transmiter for air duct, -30…50°C, 0…10Vdc output, ±1.5°C, IP65 (I) €55 TTC013 Temperature transmiter for air duct, 0…100°C, 0…10Vdc output, ±2°C, IP65 (I) €55 T/PI-S/40 Duct sensor, -10…40°C, PT100 sensor, IP67, 4…20mA (T) Trend, Cylon €75 T/PI-S/110 Duct sensor, -10…110°C, PT100 sensor, IP67, 4…20mA (T) Trend, Cylon €75 T/PI-S/-40 Duct sensor, -40…50°C, PT100 sensor, IP67, 4…20mA (T) Trend, Cylon Trend, Cylon Outside temperature sensors and transmitters. Many probes like 10k3A1, 10k4A1, PT100, NTC10k, NTC10k2. Depend of your needs, 2 kinds of outputs are available on transmitters: 0…10V or 4…20mA. Others sensors can be special ordered such as NTC1K8, NTC100K, Ni1000, PT1000. Part # Description BMS Price TB/TO Temperature sensor, for outside, -30…50°C, 10K3A1 sensor, IP65, resistive, Cyclon/Trend BMS type (T) Trend, Cylon €15 STE14 Temperature sensor, for outside, -20…70°C, 10K3A1 sensor, IP65, resistive, Cyclon/Trend BMS type (I) Trend, Cylon €12 TTE012 Temperature transmiter for room/outdoor, -30…50°C, 0…10Vdc output, ±1.5°C, IP65 (I) Trend, Cylon €54 TE200FE24 Temperature sensor, for outside, -50…100°C, NTC10K2 sensor, IP64, resistive, Cyclon/Trend BMS type (G) Trend, Cylon €13 T/PO/-40 Temperature sensor, for outside, -40…50°C, PT100 sensor, IP67,4…20mA (T) Trend, Cylon €75 STE15 Temperature sensor, room/outside, -20…70°C, 10K4A1 sensor, IP65, resistive (I) Trend, Cylon €12 STE21 Temperature sensor, room/outside, -20…70°C, PT100 sensor, IP65, resistive (I) Trend, Cylon €16 TTE013 Temperature transmiter for room/outdoor, 0…100°C, 0…10Vdc output, ±2°C, IP65 (I) €54 TTE022 Temperature transmiter for room/outdoor, 30…50°C, 4…20mA output, ±1.5°C, IP65 (I) €55 €17 €23 €12 €23 €25 €75 Click onto the 'Promotions' Tab of our Website (www.intelcontrols.com) to view our latest SPECIAL OFFERS! Phone: +353 1 45 75 421 Email: [email protected] 2 Specialists in BeMS Measurement & Control www.intelcontrols.com Temperature Sensors & Controllers Strap on Temperature Sensors Flue Gas Temperature Sensors Strap-on temperature sensors are designed to be pipe mounted. You don't need to make a hole in the pipe. The choice of the probe depends on the temperature range and the precision you need.Others sensors can be special ordered such as NTC1K8, NTC100K, Ni1000, PT1000 or Transmitter with 4…20 mA outputs. Part # Description TB/TC Temperature sensor, Strap on, -30…110°C, 10K3A1 sensor, IP67, resistive (T) T/PC/40 T/PC/110 T/PC/160 Temperature sensor, Strap on, 10…40°C, PT100 sensor, IP67, 4…20mA (T) Temperature sensor, Strap on, 10…110°C, PT100 sensor, IP67, 4…20mA (T). Temperature sensor, Strap on, 10…160°C, PT100 sensor, IP67, 4…20mA (T). Flue gas temperature sensors. Use to measure high temperature in flue output. Up to 600°C range. Many probes like PT100 or PT1000. Please contact us if you need special material like other probes or outputs. Part # BMS Trend, Cylon Trend, Cylon Trend, Cylon BMS Price €75 Temperature sensor, Flue gas, -50…600°C, PT100 sensor, IP65, resistive, aluminium din head, Cyclon/Trend BMS type (I) Temperature sensor, Flue gas, -50…600°C, PT1000 sensor, IP65, resistive, aluminium din head, Cyclon/Trend BMS type (I) T/FGS Trend, Cylon €154 €75 Temperature sensor, Flue gas, 0…400°C, PT100 sensor, IP67, 4…20mA, 230mm probe (T) T/FGL Temperature sensor, Flue gas, 0…400°C, PT100 sensor, IP67, 4…20mA, 380mm probe (T) Trend, Cylon €166 Part # Description T/AV-S Temperature sensor, PT100, 10…110°C, Cyclon/T IP67, averaging, 4…20mA, 3.5m, (T) rend €172 T/AV-L Temperature sensor, PT100, 10…110°C, Cyclon/T IP67, averaging, 4…20mA, 7m (T) rend €179 Price DPTD/20 €21 DPTD1/20 Trend, Cylon Description €114 Trend, Cylon €52 Trend, Cylon €52 Averaging Temperature Sensors Averaging temperature sensors for HVAC duct applications where point measurement is inadequate. Up to 7m length flexible copper tube link to a PT100 probe in a 100mm rigid part is available. Adjustable mounting plate allows stand-off to clear duct installation. NTC10k2 is available but with a slightly longer delay. BMS Price Wireless Temperature Control System XW/R/IQ - Trend Controls Wireless Receiver The XW/R/IQ wireless receiver compliments the wireless sensors to provide a cost effective flexible wireless system for BMS temperature measurement and metering. Part # Description Price TW/P Wireless HVAC equipment sensor pcb and blanking plug for M20 gland for post fit into TB HVAC equipment sensor housing (T) €98 TW/S Wireless Space Sensor TX (T) €93 PCW/METER Wireless Transmitter for Meters (T) €102 PCW/STATUS Pulse counter wireless sensor with digital input status reporting (T) €102 Part # Description Price XW/R/IQ Wireless sensor receiver with plastic wall bracket (T) €305 ACCW/RW/IQ Wireless Sensor Repeater (T) €607 ACCW/FK/SS Stainless steel wall bracket for mounting XW/R/IQ at a distance of 28 cm from wall (T) €22 Programming kit for XW/R/IQ including ACCW/CONFIG connection cable between receiver, PC, and KIT input power supply, and CD containing configuration software (T) Phone: +353 1 45 75 421 Email: [email protected] €36 3 Specialists in BeMS Measurement & Control www.intelcontrols.com Temperature Sensors & Controllers Wireless Temperature Control System Fan Controllers The wireless temperature control system is the easiest way to add a temperature regulation system to an already existing building. Depending on your needs, you can choose a receiver that allows you to regulate up to 9 zones separately. The central system is able to turn on an individual radiator or operate valves for zone manifolds. The installation requires no brickwork, plastering or cabling. The thermostats have severale modes (anti-frost, night, confort) and some can be weekly programmed for best energy management. Fan controllers can manage up to 3 fan separately on relay output or 0…10V output, for a finnest regulation. There is also a summer and winter switch which allow you to regulate the temperature in an other way in cold day than hot day. Choose a display if you need. Part # Part # 1TXCRTX04 1TXTET04 1TXVTRX01/3 1TXRX02/P 1TXRX0801/P Description Price Fan controller, 5…30°C, 2 pipes, 1 relay output,(On/Off, 3 speed)switches, Remote DBTA-323-435 S/W, NTA010-623 sensor, 24V/230V powered (I) €26 Fan controller, 5…30°C, 2/4 pipes, 0…10V DBTA-335-933 output,(S/W, 3 speed)switches, NTB010-623 sensor, 24V powered (I) €36 Fan controller, 5…30°C, 4 pipes, 4 relays DBTA-343-139 output,(S/W, 3 speed, On/Off)switches, NTB010-623 sensor, 24V/230V powered (I) €34 Fan controller, 5…30°C, 4 pipes, 4x0…10V DBTA-345-139 output,(S/W, 3 speed, On/Off)switches, NTB010-623 sensor, 24V powered (I) €37 Price Digital weekly programmable thermostat with radio transmitter RF 868 MHz 3 temperature levels, confort/night reduction/no frost; minimum switch 30’; possibility to receive a remote command from the phone; MASTER function; IP30; 3V DC battery operated; white color (P) Thermostat, 2 x 1.5V, Wireless 30/130m range, On/Off operation adjustable, Sum/Win Control (P) €67 €45 Electronic radiator valve with radio receiver RF868MHz LEDs indicating RF signal level; switch for manual operation; IP30; 3V DC battery operated (P) €65 2 zones receiver + 1 pump output RF 868 MHz receiver; LEDs indicating RF signal level; switch for manual operation; 2+1 relay for operating 5A/250V AC loads; IP32; 230V AC 50-60Hz (P) €68 8 zones receiver + 1 pump output RF 868 MHz receiver; LEDs indicating RF signal level; switch for manual operation; BUS output for operating the control box; IP32; 230V AC 5060Hz (P) €76 Control box with 8+1 output relays 8 relay control unit + 1 additional relay for 1TXBC0801/230 pump activation; white colour; surface mounting; relay outputs 8 x 8(2)A/250Vac; IP52; mains operated 230Vac 50-60Hz (P) 1TXRX01/M Description 1 zone receiver module 60x60 mm radio signal level indication; manual override; 5A/250V; IP30; 230V AC 50-60 Hz; white colour (P) Fan Controller, 5…30°C, 2/4 pipes, 1 relay output, (S/W, 3 speed, On/Off) switches, DBTA-393-435 NTA010-623 sensor, Display, 230V powered (I) Fan controller, 5…30°C, 4 pipes,1 relay and 2x0…10V output,(S/W, 3 speed, DBTA-3A8-130 On/Off)switches, NTC-10K sensor,Display, 24V powered (I) Fan controller, 5…30°C, 2 pipes,1 relay and 1x0…10V output,(S/W, 3 speed, DBTA-3B8-130 On/Off)switches, NTC-10K sensor, remote S/W, Display, 24V powered (I) €55 €55 TFEZ01MC Thermostat with on/off switch , adjustable neutral zone, double output heating/cooling, automatic changeover. Special pin stop system for limiting the set-point range. 230 V~ power supply. (S) €46 TFPF03MC Digital configurable thermostat with automatic or manual fan speed selection. H 230 V~ power supply. (S) €76 Call us on +353 1 45 75 421 or send us an e-mail at [email protected] for more information on any of our products. €112 €54 €52 Intelligent Building Controls Ltd. Phone: +353 1 45 75 421 Email: [email protected] We will be happy to help you with any queries you may have. 4 Specialists in BeMS Measurement & Control www.intelcontrols.com Valves Zone Valves with 2.5 stroke & Actuators Zone Valves & Actuators Manufactured by Honeywell for Trend - This series is ideal individual room control, fan coil units and small re-heaters/re-coolers; hot water or cold water (max. 50% glycol), water quality VDI2035. Range 2…120°C, PN16, includes adjustment cap. Male Threaded connex connection. Part # VS582-15-1.6 Description VS583-15-1.6 VS583-20-2.5 VS584-15-1.6 VS584-20-2.5 Price 2 Port Zone Valve, 2.5mm Stroke, DN15, Kvs 1.6 €13 2 Port Zone Valve, 2.5mm Stroke, DN20, Kvs 2.5 VS582-20-2.5 JOHNSON CONTROL - Designed to regulate the flow of water in response to the demand of a controller in zone and terminal unit applications. They can be used in combination with VA- 7010 electric ON/OFF actuator , VA-7047 / VA-7067 thermal actuator and or VA-7470/72 floating or proportional actuator. The valves are available in 2-way PDTC (Normally Open), 2-way PDTO (Normally Closed), 3-way mixing and 3-way mixing with built-in Normally Open bypass configurations. 3 Port Zone Valve, 2.5mm Stroke, DN15, Kvs 1.6 €18 €19 3 Port Zone Valve, 2.5mm Stroke, DN20, Kvs 2.5 €18 4 Port Zone Valve, 2.5mm Stroke, DN15, Kvs 1.6 €19 4 Port Zone Valve, 2.5mm Stroke, DN20, Kvs 2.5 €30 Actuators Actuators for VS58i series valves, 90 N.m torque, With or without spring return up/down, 24V powered, 2-3 points control. Part # Description Price V5810DC Zone 3-way,DN10,1kvs (JC) €40 V5810EC Zone 3-way,DN10,1.6kvs (JC) €40 V5810JC Zone 3-way,DN15,2.5kvs (JC) €43 V5810KC Zone 3-way,DN15,4.0kvs (JC) €43 V5810MC Zone 3-way,DN20,5kvs (JC) €53 V5510DC Zone 4-way Normally Open,DN10,1kvs (JC) €43 V5510EC Zone 4-way Normally Open,DN10,1.6kvs (JC) €43 V5510JC Zone 4-way Normally Open,DN15,2.5kvs (JC) €50 V5590EC Zone 4-way Normally Open,DN10,1.6kvs (JC) €50 V5210DC Zone 2-way Normally Open,DN10,1kvs (JC) €29 V5210EC Zone 2-way Normally Open,DN10,1.6kvs (JC) €29 V5210JC Zone 2-way Normally Open,DN15,2.5kvs (JC) €29 V5210KC Zone 2-way Normally Open,DN15,3.5kvs (JC) €29 V5210MC Zone 2-way Normally Open,DN20, 4.5kvs (JC) €52 Actuators Part # Description AL0102-24 Linear Actuator, 2.5mm stroke, 90N ATO102-24-SD ATO102-24-SU Electrical Thermic Spring Down Actuator, 2.5mm Stroke, 180 Secs, 24Vac Electrical Thermic Spring Up Actuator, 2.5mm Stroke, 180 Secs, 24Vac Control Force Price 3-pt 90N €39 2-pt 90N €17 2-pt 90N Actuators for V5i10 series valves, 120 N.m torque, Without spring return, 24V powered, 2 points or proportional control. Part # Description Control Force Price VA7470-1001 Zone Electric 24 volt , Floating 3 Point (JC) 2 point on/off 120N €35 VA7472-9001 Zone Electric 24 volt , Proportional (JC) Proportio nal 120N €36 €17 Phone: +353 1 45 75 421 Email: [email protected] 5 Specialists in BeMS Measurement & Control www.intelcontrols.com Valves Zone Valves with 6.5 stroke & Actuators Actuators Manufactured by Honeywell for Trend - This series is ideal individual room control, fan coil units and small re-heaters/re-coolers; hot water or cold water (max. 50% glycol), water quality VDI2035. Range 2…120°C, PN16, includes adjustment cap. Male Threaded connex connection. Part # Description Price V582-15-0.16 2 Port Zone Valve,6.5mm stroke,DN15,Kvs 0.16 €14 V582-15-0.25 2 Port Zone Valve,6.5mm stroke,DN15,Kvs 0.25 €14 V582-15-0.4 2 Port Zone Valve, 6.5mm stroke, DN15, Kvs 0.4 €14 V582-15-0.6 2 Port Zone Valve, 6.5mm Stroke, DN15, Kvs 0.6 €14 V582-15-1.0 2 Port Zone Valve, 6.5mm Stroke, DN15, Kvs 1.0 €14 V582-15-1.6 2 Port Zone Valve, 6.5mm stroke, DN15, Kvs 1.6 €14 V582-20-2.5 2 Port Zone Valve, 6.5mm Stroke, DN20 Kvs 2.5 €22 V582-20-4.0 2 Port Zone Valve, 6.5mm stroke, DN20, Kvs 4.0 €22 V583-15-0.25 3 Port Zone Valve,6.5mm Stroke,DN15,Kvs 0.25 €21 V583-15-0.4 3 Port Zone Valve, 6.5mm Stroke, DN15, Kvs 0.4 €21 V583-15-0.6 3 Port Zone Valve, 6.5mm Stroke, DN15, Kvs 0.6 €21 V583-15-1.0 3 Port Zone Valve, 6.5mm Stroke, DN15, Kvs 1.0 €21 V583-15-1.6 3 Port Zone Valve, 6.5mm Stroke, DN15, Kvs 1.6 €21 V583-20-2.5 3 Port Zone Valve, 6.5mm Stroke, DN20, Kvs 2.5 €29 V583-20-4.0 3 Port Zone Valve, 6.5mm Stroke, DN20, Kvs 4.0 €29 V584-15-0.25 4 Port Zone Valve,6.5mm Stroke,DN15,Kvs 0.25 €21 V584-15-0.4 4 Port Zone Valve, 6.5mm Stroke, DN15, Kvs 0.4 €21 V584-15-0.6 4 Port Zone Valve, 6.5mm Stroke, DN15, Kvs 0.6 €21 V584-15-1.0 4 Port Zone Valve, 6.5mm Stroke, DN15, Kvs 1.0 €21 Actuators for V58i series valves, up to 180 N.m torque, With or without spring return up/down, 24V powered, 2 points or 0…10V control. Part # AL0206-24 AL0206-24-10M AL0206-24-K AL0206-230-K AL0206-P-K ATO106-24-SD ATO106-24-SU ATO106-230-SD ATO106-230-SU Description Controls Force Trend Linear Actuator, 6.5mm stroke, 150 Secs, 24Vac R/L Trend Linear Actuator, 6.5mm stroke, 150 Secs, 24Vac R/L Trend Linear Actuator, 6.5mm stroke, 150 Secs, 24Vac, R/L Man Op Trend Linear Actuator, 6.5mm stroke, 150 Secs, 230Vac, R/L Man Op. Trend Linear Actuator, 6.5mm stroke, 150 Secs, 24Vac, 0..10v Man Op Trend Electric Thermic Actuator, Spring Down, 6.5mm stroke, 180 Secs, Trend Electric Thermic Actuator, Spring Up, 6.5mm stroke, 180 Secs, 24Vac Trend Thermic Electric Actuator, Spring Down, 6.5mm stroke, 180 Secs, Trend Thermic Electric Actuator, Spring up, 6.5mm stroke,180 Secs, 230V Price 180N €39 180N €45 180N €46 3-pt 180N €52 0/2…10V 180N €91 2-pt 90N €17 2-pt 90N €17 2-pt 90N €17 2-pt 90N €17 To help you identify the manufacturer of each product we have included an abbreviation of each manufacturer as part of each product description: (AM) = Air Monitor (D) = Dristeem IBC Dublin Freight Deals! Order your products from IBC up until 1pm and receive same day delivery for €10!! Order your products from IBC up until 3pm and receive same day delivery for €15!! * Offer applies to all Dublin areas (1-24) & products in stock only. (G) = Greystone (I) = Industrie Technik (JC) = Johnson Controls (J) = Joventa (P) = Perry Electric (S) = Seitron (T) = Trend (Z) = ZIP Phone: +353 1 45 75 421 Email: [email protected] 6 Specialists in BeMS Measurement & Control www.intelcontrols.com Valves Plant Valves/Actuator with 6.5mm Male Threaded Zone Valves with 6.5 stroke & Actuators Trend V163N valves provide a high quality, cost effective solution for most LPHW and chilled water applications where threaded connections up to 50 mm are required. They are suitable for pressures up to 16 bar, and the 20 mm stroke length gives good rangeability. These valves may be used with glycol concentrations of up to 50 %. Manufactured by Honeywell for Trend - Pressure balanced control valve. For small AHUs and re-heaters/re-coolers where cost effectiveness is important; hot water or cold water (max. 50% glycol), water quality VDI2035. Press down to open. Range 2…130°C. Connection is flat sealing. Valves are supplied with threaded fittings for externally threaded pipes and adjustment cap. per Actuators Part # Description 2 Port, 6.5mm Stroke, PN16, DN25, Kvs 6.3 SV162X-25-6.3 Part # Description DB-VZ2-15 On-off zone valves with actuator G 1/2, 2-way, 1.5 KVs, 2.5 bar diff press max, ≤10s opened ≤5s closed. (I) €13 DB-VZ2-20 On-off zone valves with actuator G 3/4, 2-way, 2.5 KVs, 1.0 bar diff press max, ≤10s opened ≤5s closed. (I) €15 DB-VZ2-25 On-off zone valves with actuator G 1, 2-way, 4.8 KVs, 0.6 bar diff press max, ≤10s opened ≤5s closed. (I) Price 2 Port, 6.5mm Stroke, PN16, DN25, Kvs 10 SV162X-25-10 2 Port, 6.5mm Stroke, PN16, DN32, Kvs 16 SV162X-32-16 2 Port, 6.5mm Stroke, PN16, DN40, Kvs 25 SV162X-40-25 3 Port, 6.5mm Stroke, PN16, DN25, Kvs 6.3 SV163X-25-6.3 €18 3 Port, 6.5mm Stroke, PN16, DN25, Kvs 10 SV163X-25-10 3 Port, 6.5mm Stroke, PN16, DN32, Kvs 16 SV163X-32-16 Part # Description SM230/SA Electric actuators for DB-VZ valves series, 230Vac, 50/60Hz, 7VA, Running time approx. 10 sec. electrically operating, 5 sec. by spring return (I) €70 €93 €124 €77 €77 €103 €135 Actuators for SV16ij series valves, With or without spring return, 24V or 230V powered, 23pt or 0…10V control Price Electric actuators for DB-VZ valves series, 24Vdc, 50/60Hz, 7VA, Running time approx. 10 sec. electrically operating, 5 sec. by spring return (I) €70 Actuators Actuators for DB-VZ2 series valves, With spring return, 24V or 230V powered, SM24/CA 3 Port, 6.5mm Stroke, PN16, DN40, Kvs 25 SV163X-40-25 Actuators Price Part # Description AL0306-24 Electrical Linear Actuator, 6.5mm Stroke, 150 Secs, 24Vac R/L 3-pt 300N €41 AL0306-24-K Electrical Linear Actuator,6.5mm Stroke,150 Secs,24Vac,R/L Man Op 3-pt 300N €52 AL0306-230-K Electrical Linear Actuator, 6.5mm Stroke, 150 Secs, 230Vac, R/L 3-pt 300N €66 AL0306-P-K 6.5mm stroke, 15 Secs, 24Vac, 3 pt Man Op, Floating Control 3-pt 300N €89 AL0406-P-K 6.5mm stroke, 15 Secs, 24Vac, 0..10v Man Op, Modulating Control 0/2…10V 400N €98 AL0406-P-SU 6.5mm Stroke 60 Secs 24Vac Proportional Spring Up (T) 0/2…10V 400N €145 €17 €17 Phone: +353 1 45 75 421 Email: [email protected] Controls Force Price 7 Specialists in BeMS Measurement & Control www.intelcontrols.com Valves Linear Plant Valves & Actuators Manufactured by Honeywell for Trend - V162N Valves provide a high quality, cost effective solution for most LPHW na dchilled water applications where threaded connections of up to 50mm are required. They are suitable for pressures up to 16 Bar, and the 20mm stroke length gives good rangeability. These valves may be used with lycol concentrations of up to 50%. Use with Trend AL0620 and AL1820 series actuators, no linkage adapter is required. Part # Description Part # Description Price V162N-15-0.6 Plant valve, 2 ports, 0.6 KVS, 2-170°C, brass body, 1600KPa, 20 stroke, DN15 (T) €61 V163N-40-25 Plant valve, 3 ports, 25 KVS, 2-170°C, brass body, 460KPa, 20 stroke, DN40 €100 V162N-15-1.0 Plant valve, 2 ports, 1 KVS, 2-170°C, brass body, 1600KPa, 20 stroke, DN15 (T) €61 V163N-50-40 V162N-15-1.6 Plant valve, 2 ports, 1.6 KVS, 2-170°C, brass body, 1600KPa, 20 stroke, DN15 (T) €61 V162N-15-2.5 V162N-15-4.0 V162N-20-6.3 V162N-25-10 V162N-32-16 V162N-40-25 Price Plant valve, 2 ports, 2.5 KVS, 2-170°C, brass body, 1600KPa, 20 stroke, DN15 (T) Plant valve, 2 ports, 4 KVS, 2-170°C, brass body, 1600KPa, 20 stroke, DN15 (T) Plant valve, 2 ports, 6.3 KVS, 2-170°C, brass body, 1600KPa, 20 stroke, DN20 (T) Plant valve, 2 ports, 10 KVS, 2-170°C, brass body, 1000KPa, 20 stroke, DN25 (T) Plant valve, 2 ports, 16 KVS, 2-170°C, brass body, 700KPa, 20 stroke, DN32 (T) Plant valve, 2 ports, 25 KVS, 2-170°C, brass body, 460KPa, 20 stroke, DN40 (T) €61 €61 €65 €68 €82 V162F-100-160 Plant valve, 3 ports, 40 KVS, 2-170°C, brass body, 260KPa, 20 stroke, DN50 38mm stroke, 2 port plant valve, DN100, 160 KVS, 2-220°C, cast iron body. V162F-125-250 38mm stroke, DN125, 2 port plant valve, 250 KVS, 2-220°C, cast iron body. €912 V162F-150-360 38mm stroke, DN150, 2 port plant valve, 360 KVS, 2-220°C, cast iron body €1,057 V163F-100-160 38mm stroke, DN100, 3 port plant valve, 160 KVS, 2-220°C, cast iron body, PN16 €565 V163F-125-250 38mm stroke, DN125, 3 port plant valve, 250 KVS, 2-220°C, cast iron body, €931 V163F-150-360 38mm stroke, DN150, 3 port plant valve, 360 KVS, 2-220°C, cast iron body. €1,257 V162F-65-63 €100 V162F-80-100 Plant valve, 2 ports, 40 KVS, 2-170°C, brass body, 260KPa, 20 stroke, DN50 (T) €128 V163N-15-2.5 Plant valve, 3 ports, 2.5 KVS, 2-170°C, brass body, 1600KPa, 20 stroke, DN15 (T). €61 V163N-15-4.0 Plant valve, 3 ports, 4 KVS, 2-170°C, brass body, 1600KPa, 20 stroke, DN15 (T). €61 V163N-20-6.3 Plant valve, 3 ports, 6.3 KVS, 2-170°C, brass body, 1600KPa, 20 stroke, DN20 (T). €65 V163N-25-10 Plant valve, 3 ports, 10 KVS, 2-170°C, brass body, 1000KPa, 20 stroke, DN25 (T) €68 V163N-32-16 Plant valve, 3 ports, 16 KVS, 2-170°C, brass body, 700KPa, 20 stroke, DN32 (T) €82 V162N-50-40 V163F-65-63 V163F-80-100 20mm Stroke, DN65, 2 port plant valve flanged, 63 Kvs 20mm Stroke, DN80, 2 port plant valve flanged, 100 Kvs 20mm Stroke, DN65, 3 port plant valve flanged, 63Kvs 20mm Stroke, DN80, 3 port plant valve flanged,100Kvs €128 €599 €315 €464 €331 €431 Matching Actuators on the following page Phone: +353 1 45 75 421 Email: [email protected] 8 Specialists in BeMS Measurement & Control www.intelcontrols.com Valves Plant Actuators Electrical Linear Actuator - Manufactured by Honeywell. AL0620 Series, AL1820 Series & AL1838 Series. Part # Description Price Part # Description Price AL0620-24-K 20mm Stroke, 60 Secs, 24Vac, R/L, Man Op, stem force 600n €182 AL0620-230-SU 20mm Stroke 108 Secs 230Vac R/L Spring Up, stem force 600n €305 AL0620-230-K 20mm Stroke, 60 Secs, 230Vac, R/L, Man Op, stem force 600n €182 AL0620-P-SU 6.5mm Stroke 60 Secs 24Vac Proportional Spring Up (T) €373 AL0620-P 20mm Stroke, 60 Secs, 24Vac 2..10v, Stem force 600n €165 AL1820-24-K 20mm Stroke 114 Secs 24Vac R/L Man Op, stem force 1800n (T) €278 AL0620-P-K 20mm Stroke, 60 Secs, 24Vac 0…10v Man Op, stem force 600n AL0620-P-X-K 20mm Stroke, 30 Secs, 24Vac Proportional, Man Op, stem force 600n AL1820-230-K 20mm Stroke, 114 Secs, 230Vac R/L Man Op, stem force 1800n €298 €250 AL1820-P-K 20mm Stroke, 114 Secs, 24Vac Proportional Man Op, stem force 1800n €345 AL0620-24-SD 20mm Stroke, 108 Secs, 24Vac R/L, Spring Down, stem force 600n €305 AL01838-24-K AL0620-230-SD 20mm Stroke, 108 Secs, 230Vac, R/L Spring Down, stem force 600n €305 AL0620-P-SD 20mm Stroke 108 Secs 24Vac 0…10,Spring Down, stem force 600n (T) €373 AL0620-24-SU 20mm Stroke, 108 Secs, 24Vac, R/L Spring Up, stem force 600n €240 AL01838-230-K AL01838-P-K 38mm Stroke 108 Secs 24Vac Man Op, stem force 2000n (T) €285 38mm Stroke 108 Secs 24Vac Man Op, stem force 2000n (T) €285 38mm Stroke 108 Secs 24Vac 0…10V Man Op, stem force 2000n (T) €357 €305 Don't forget to check out our NEW E-COMMERCE WEBSITE at www.intelcontrols.com where you can now purchase your products online at the click of a button 24 hours, 7 days a week!! Phone: +353 1 45 75 421 Email: [email protected] 9 Specialists in BeMS Measurement & Control www.intelcontrols.com Valves Linear Plant Valves & Actuators Johnson Controls Mixing Valves. For more information about any of the valves below please give us a call. Parts # Description Price VG7201ET Linear plant valve, 2 ports, 1.6 KVS, 2-140°C, Bronze body, 1600 Kpa, 8 Stroke, 2 way PDTC, DN15 (JC) €37 VG7201FT Linear plant valve, 2 ports, 2.5 KVS, 2-140°C, Bronze body, 1490 Kpa, 8 Stroke, 2 way PDTC, DN15 (JC) €38 VG7201GT Linear plant valve, 2 ports, 4 KVS, 2-140°C, Bronze body, 1490 Kpa, 8 Stroke, 2 way PDTC, DN15 (JC) €38 VG7201LT Linear plant valve, 2 ports, 6.3 KVS, 2-140°C, Bronze body, 950 Kpa, 8 Stroke, 2 way PDTC, DN20 (JC) €40 VG7201NT Linear plant valve, 2 ports, 10 KVS, 2-140°C, Bronze body, 1235 Kpa, 19 Stroke, 2 way PDTC, DN25 (JC) €77 VG7201PT Linear plant valve, 2 ports, 16 KVS, 2-140°C, Bronze body, 750 Kpa, 19 Stroke, 2 way PDTC, DN25 (JC) €99 VG7201RT Linear plant valve, 2 ports, 25 KVS, 2-140°C, Bronze body, 480 Kpa, 19 Stroke, 2 way PDTC, DN40 (JC) €136 VG7201ST Linear plant valve, 2 ports, 40 KVS, 2-140°C, Bronze body, 310 Kpa, 19 Stroke, 2 way PDTC, DN50 (JC) €187 VG7802LT Linear plant valve, 3 ports, 6.3 KVS, 2-140°C, Bronze body, 950 Kpa, 19 Stroke, 3 way mixing configuration, DN20 (JC) €40 VG7802NT Linear plant valve, 3 ports, 10 KVS, 2-140°C, Bronze body, 1235 Kpa, 19 Stroke, 3 way mixing configuration, DN25 (JC) €77 VG7802PT Linear plant valve, 3 ports, 16 KVS, 2-140°C, Bronze body, 750 Kpa, 19 Stroke, 3 way mixing configuration, DN32 (JC) €99 VG88G1S1N Linear plant valve, 3 ports, 25 KVS, 2-140°C, Bronze body, 480 Kpa, 19 Stroke, 3 way mixing configuration, DN40 (JC) €657 VG88H1S1N Linear plant valve, 3 ports, 100 KVS, 0-180°C, Cast iron body, 370 Kpa, 25 Stroke, 3 way mixing configuration, DN80 (JC) €854 VG82G1S1N Linear plant valve, 3 ports, 63 KVS, 0-180°C, Cast iron body, 750 Kpa, 19 Stroke, 3 way mixing configuration, DN65 (JC) Actuators Johnson - Actuator with 1000N thrust, (3-point) control or proportional control, manual override, stroke 7 mm to 25 mm, Proportional models are self-calibrating, supports VG7000 and VGS8…threaded valves, VG9000 and VG8000 flanged valves. Part # Description Price 24V, (Proportional, On/Off,Floating, 0…10V, VG7810-GCA-11 4…20mA) controls, 1000N, override, VG7000, NON-Spring return (JC) €170 VG7810-GCA-12 24V, (Proportional, On/Off,Floating, 0…10V, 4…20mA) controls, 1000N, override, VG8/9000 NON-Spring return (JC) €174 €404 VA-7150-1001 24V, Floating 3-pt control, 500N, override, VG7000, manual stroking required (JC) €53 VG82H1S1N Linear plant valve, 3 ports, 100 KVS, 0-180°C, Cast iron body, 370 Kpa, 25 Stroke, 3 way mixing configuration, DN80 (JC) €634 VA-7152-1001 24V, proportional control, 500N, VG7000, manual stroking required (JC) €77 VG7802RT Linear plant valve, 3 ports, 25 KVS, 2-140°C, Bronze body, 480 Kpa, 19 Stroke, 3 way mixing configuration, DN40 (JC) €187 VA-7740-1001 24V, 3-pt control, 500N, VG7000, override, auto stroking required (JC) €91 VG7802ST Linear plant valve, 3 ports, 40 KVS, 2-140°C, Bronze body, 310 Kpa, 19 Stroke, 3 way mixing configuration, DN50 (JC) €347 VA-7746-1001 24V, proportional control, 500N, VG7000, override, auto stroking required (JC) €146 Phone: +353 1 45 75 421 Email: [email protected] 10 Specialists in BeMS Measurement & Control www.intelcontrols.com Valves Butterfly Valves/Actuator - DA/DM series Butterfly Valves The VMF series of Industrie Technik Butterfly Valves are designed for use in LPW (low pressure water) heating and air conditioning systems. Characteristics include: low weight and dimensions, easy to assemble and dis-assemble, low cost of maintenance, low pressure drop, easy to operate, automatic regulating and bubble tinth shat-off. Part # Description VF50 Butterfly Valves for electric actuators DA/DM series. DN 50mm, 99m3/h, 10 bar max diff. pressure (Actuator 24 Nm - 32Nm, DAL.../DML24) (I) €74 VF65 Butterfly Valve for electric actuator DA/DM series. DN 65mm, 170m3/h, 8 bar max diff. pressure. (Actuator 24Nm - 32Nm, DAL.../DML24) (I) €80 €83 Butterfly Valve for electric actuator. 16 N.m, DN 100mm (I) €231 205WEDN150 Butterfly Valve for electric actuator. 16 N.m, DN 150mm (I) €304 DM1.1 16Nm with Runtime 80-110 seconds, 24v Proportional (J) €117 DMG1.1 32Nm with Runtime 125-160 seconds, 24v Proportional, switch (J) €165 205WEDN100 Characteristics include: - Spheroidal cast-iron body (EN-JS1030) - Shaft tight O-Ring - Seat EPDM - Fluid temp: -10 to 100°C - Close-off leakage rate A (DIN EN 12266-1) Price Butterfly Valve for electric actuator DA/DM series. DN 80mm, 261m3/h, 8 bar max diff.pressure. (Actuator 24Nm - 32Nm, DAG.../DMG24) (I) VF80 Controlli - Series VFA. These valves are ready for mounting on MDA actuators. They can also be motorised by MDL actuators by means of AF25 adapter. Model VFA (PN10) Model Actuators for Butterfly Valves Controlli - Series MDA. Bidirectional actuator for VFA butterfly valves. - Floating (MDA2.-4.) or proportional 0-10V (MDA5.) control signal - Angualr stroke 90°C - Manual Control - Supplied with linkage for mounting on valve body - Protection IP54 MDA22 Max Differential Pressure Bar MDA24/44/54 MDA22/42/53 DN Kvs 25 27.8 _ €76 32 28.5 _ €79 40 58 _ €91 50 107 _ €99 65 201 _ €107 80 336 _ €131 100 576 _ €148 125 840 _ 600 €182 150 1295 _ 300 €268 200 2470 _ 300 €378 600 Timing Power s. Supply 90 Torque Nm 20 230 MDA24 150 40 MDA42 90 20 MDA44 150 40 24 MDA52 90 20 MDA54 150 40 MDAV2 Other Characteristics For VFA Valves up to DN100 For VFA Valves DN125 to DN200 For VFA Valves up to DN100 For VFA Valves DN125 TO DN200 For VFA Valves up to DN100 For VFA Valves DN125 to DN200 DMDA microswitch assembling on MDA actuator Phone: +353 1 45 75 421 Email: [email protected] Price Price €300 €504 €300 €504 €406 €526 €11 11 Specialists in BeMS Measurement & Control www.intelcontrols.com Valves Shoe Valves Air Damper Actuators Controlli - Series M Shoe Valves. Cast-iron NP6 - To be motorised by MDB24-44-54 actuators, fitted with AM72. Model DN Kvs Max Diff. Pressure Bar Other Characteristics 1" 30 100 11/4" 37 100 38 100 2" 45 100 • Three way • NP 6 cast-iron valve body • Female threaded connections • Outlet from angle-way • Fluid temperature:110°C max 40 38 50 Model Torque Power Supply Control Action MicroSwitch Price MDB42M 5Nm 24Vac 2-3 pos. 2 €91 €100 MDB52 5Nm 24Vac 0-10Vdc proportional _ €98 MDB24M 8Nm 230Vac 2-3 pos. 1 €103 €124 MDB44 8Nm 24Vac 2-3 pos. _ €84 100 €149 MDB44M 8Nm 24Vac 2-3 pos. 1 €103 70 100 €174 MDB54 8Nm 24Vac 0-10Vdc proportional _ €124 65 80 80 MDB46M 15Nm 24Vac 2-3 pos. 2 €143 80 90 50 MDB48M 20Nm 24Vac 2-3 pos. 2 €160 100 110 30 MDB56 15Nm 24Vac _ €160 MDB58 20Nm 24Vac _ €194 125 120 20 1" 30 100 37 100 11/2" 40 100 2" 45 100 50 70 100 65 80 100 80 90 80 100 110 30 M4 (PN6) 11/4" threaded M4 (PN6) flanged Price €96 M3 (PN6) threaded 11/2" M3 (PN6) flanged Controlli Air Damper Actuators - Without Spring Return MDB Series. Maximum rotation 95°. For air dampers up to 2sqm. IP54. As above, with flanged connections €108 €218 €312 €389 €584 • Four-Way • NP 6 cast-iron valve body • Female threaded connections • Fluid temperature: 110°C max €103 0-10Vdc proportional 0-10Vdc proportional €107 €115 €128 €209 As above, with flanged connections €264 €403 €459 Intelligent Building Controls Ltd. Unit 10, Oak Road Business Park, Nangor Road, Dublin 12, Ireland. PH: +353 (0)1 457 5421 E-mail: [email protected] Phone: +353 1 45 75 421 Email: [email protected] 12 Specialists in BeMS Measurement & Control www.intelcontrols.com Damper Actuators Damper Actuators Rotary Damper Actuators. Range includes up to 34Nm, 24V or 230V, On/Off, 2-3 point control or 0….10V for more precise control & option of spring return. Part # DAN1.N DAN2.SN DAN2.N DMN1.2N AD05-24 AD05-230 AD05-P AD05-P-SW2 Description Price 4Nm, 24v, floating 2 & 3 Point Position, 24VAC, 0.8 m³, 90°, 35 sec, Electric Damper Actuator 230 VAC, floating 3 points, 4 Nm, C/w Aux. Switches, 0.8 m³, 90°, 35 sec, Electric Damper Actuator 230 VAC, floating 3 points, 4 Nm, 0.8 m³, 90°, 35 sec, Electric Damper Actuator 4Nm 24v Proportional 0-10Vdc (J) 5 Nm, 24 Vac/dc, 2/3 point control, Non-Spring Return (T) Actuator for Damper, 5 Nm, 230 Vac, 2 point control, Non-Spring Return 5 Nm, 24 Vac/dc, 0/2..10V or 2/3 point control, NonSpring Return (T) 5 Nm, 24 Vac/dc, 0/2..10V or 2/3 point control, with switches, Non-Spring Return (T) 5 Nm, 24 Vac/dc, 2/3 point control, with switches, NonAD05-24-SW2 Spring Return (T) €52 DML1.1 €53 €78 DML1.1S €53 DMG1.1 €53 AD34-230 €96 AD34-P €70 DAS1.S Damper actuators, 8Nm, 24V, (On/Off, Float) controls, switch (J) €86 DAS2 8Nm with Runtime 30-45 seconds, 230v 2 & 3 Position (J) €67 DMS1.1 8Nm with Runtime 30-45 seconds, 24v Proportional (J) €94 AD10-24 10 Nm, 24 Vac/dc, 2/3 point control, Non-Spring Return (T) €68 AD10-230 10 Nm, 230 Vac, 2 point control, Non-Spring Return (T) €82 10 Nm, 24 Vac/dc, 0/2..10V or 2/3 point control, NonSpring Return (T) €102 10 Nm, 24 Vac/dc, 0/2..10V or 2/3 point control, with AD10-P-SW2 switches, Non-Spring Return (T) €119 10 Nm, 24 Vac/dc, 2/3 point control, with switches, AD10-24-SW2 Non-Spring Return (T) €86 DA2.S Damper actuators, 16Nm, 230V, (On/Off, Float) controls, switch (J) €94 DM1.1 16Nm with Runtime 80-110 seconds, 24v Proportional (J) €117 AD20-24 Description Price 24Nm with Runtime 80-110 seconds, 24v 2 & 3 Position (J) 24Nm with Runtime 125-160 seconds, 24v Proportional (J) 24Nm with Runtime 125-160 seconds, 24v Proportional, switch (J) 32Nm with Runtime 125-160 seconds, 24v Proportional, switch (J) 34 Nm, 24 Vac/dc, 2/3 point control, non-spring return (T) 34 Nm, 230 Vac, 2 point control, non-spring return (T) 34 Nm, 24 Vac/dc, 0/2..10V control, non-spring return (T) €75 €157 €157 €165 €140 €140 €170 Spring Return €67 DM1.1S AD34-24 €79 8Nm with Runtime 30-45 seconds, 24v 2 & 3 Position (J) Damper actuators, 16Nm, 24V, (0…10V) controls, switch (J) 20 Nm, 24 Vac/dc, 2/3 point control, non-spring return (T) DA1 €65 DAS1 AD10-P Part # SA2.10S 8Nm, 24Vac/dc, proportional control, Aux. switches (JC) €269 SM1.10 8Nm, 230Vac, On/Off or floating control (JC) €288 DA1.FS Damper actuators, 8Nm, 24V, (On/Off, Float) controls, switch (J) €152 ADS10-24 Spring return, 10Nm, 24Vac, 2 point control (T) €112 ADS10-230 Spring return, 10Nm, 230Vac, 2 point control (T) €112 ADS10-P Spring return, 10Nm, 24Vac, 0/2..10V control (T) €147 SA2.12S 16Nm, 24Vac/dc, proportional control, Aux. switches (JC) €269 SM1.12 16Nm, 230Vac, On/Off or floating control (JC) €288 DA2.FS Damper actuators, 16Nm, 230V, (On/Off, Float) controls, switch (J) €181 ADS20-24 Spring return, 20Nm, 24Vac, 2 point control (T) €147 ADS20-230 Spring return, 20Nm, 230Vac, 2 point control (T) €147 ADS20-P Spring return, 20Nm, 24Vac, 0/2..10V control (T) €189 €135 €82 AD20-230 20 Nm, 230 Vac, 2 point control, non-spring return (T) €82 AD20-P 20 Nm, 24 Vac/dc, 0/2..10V control (T) €124 Accessories ACCA-AD2034- Switch kit for 20/34 Nm actuators with 2 SPDT SW2 adjustable switches (T) Phone: +353 1 45 75 421 Email: [email protected] €14 13 Specialists in BeMS Measurement & Control www.intelcontrols.com Misc Frost Thermostats Frost thermostats allow you to regulate the temperature around 0°C. You can keep the temperature under zero or have an anti-frost thermostat with a setpoint under zero. Part # Description Price T/FS-A Frost Protection Thermostat - Automatic Reset (T) €32 ST-FRE1 Thermostat (Frost), IP44, 230V/24V, 1 Stage, 24A/3A switch rating, Auto Reset (SO) €35 DBTF-1P Antifreeze Thermostats,1 stage, 1K diff., Auto reset, IP54, 6m capillary length. (I) €40 T/FS-M Frost Protection Thermostat - Manual Reset (T) €35 Duct Thermostats Industrie Technik - Temperature monitoring in air or non aggressive gas ducts.Temperature monitoring and safety protection with manual reset (double models) and signal contact.Well-suited for heating, cooling and air conditioning systems and general applications in domestic and industrial areas.Switch capacity: 16 (4) A, 250 Vac; 6 (1) A, 400 Vac. Protection: IP54, class I Part # Description Price DBTZ-060U Air duct thermostats 0...+90°C, 3±1K, 120°C max bulb temp. (I) €26 DBTZ-090U Single stage air duct thermostat, 0…+90, step 4°, max 120°C (I) €26 DBTZ-3090U Immersion thermostats 30…90°C, 3+-1K, 75°C max bulb temperature. (I) €26 Immersion Thermostats Industrie Technik Boiler Thermostat. Temperature control in pipes with normal fluids (water) for heating, cooling and air conditioning systems, boilers and heaters. Models with setpoint adjustment by knob on or under the cover and range calibration. Well-suited for general applications in strong polluted domestic and industrial areas. Switch capacity 15 (8) A, 24....250Vac. Protection IP65, class I. Part # Description Price DBTV-7U Boiler Thermostats 0…+60°C, 2...20K, 75°C max bulb temp, with pocket. (I) €58 DBTV-17U Boiler Thermostats +20…+90°C, 1K, 100°C max bulb temp, with pocket. (I) €48 DBTV-2U Single stage boiler thermostat, -30…+30, step 1°, max 60°C, with pocket (I) €55 DBTV-090U Single stage boiler thermostat, 0…+90, step 4°, max 120°C, with pocket (I) €26 DBTV-09090U two stage boiler thermostat,2x 0…+90, step 4°, max 120°C, with pocket (I) €40 Phone: +353 1 45 75 421 Email: [email protected] 14 Specialists in BeMS Measurement & Control www.intelcontrols.com Misc Room/Outside Thermostats Room electronic thermostats are suitable for a reliable and accurate temperature regulation in commercial and industrial premises as well as for home installation. Part # Description Price TAES132C Room Thermostat, 6…30°C, Hidden Knob, LED, IP30, 24V, 1 Stage, 5A switch rating, Auto reset (S) €7 DBET-23U Room/outside Single stage thermostat, -30…+30°C, max 60°C (I) €44 DBET-27U Room/outside Single stage thermostat, 0…+60°C, max 75°C (I) €47 TA31/I Bimetallic room thermostat, +7…+30°C, step < 1°, SPDT (I) €15 1TPTE502B Room thermostat, 0…60°C, step 0.1°C (P) €29 Strap on Thermostats Strap-on temperature sensors. Use to measure fluid temperature in a pipe without make a hole on it. Many probes like PT100 or NTC10k. Please contact us if you need special material like other probes or outputs. Part # Description 1TCTB060 Strap On thermostat adjustable range: +30 °C +90 °C; IP20; 230 V AC 50 - 60 Hz (P) €14 DBAT-3U Strap-On thermostats 0...+60°C,max temp +75°C (I) Strap-on thermostats +20…+90°C range, 8±3K diff, Max temp 85°C. U--models with knob under cover (I) €56 AT2090U Price €15 Capillary Thermostats Industrie Technik - Well-suited for heating, cooling and air conditioning systems in strong polluted areas (dusty and damp): industrial areas, commercial buildings and sport halls, storage room and garages, machine rooms, factories, greenhouses and agricultural installations.The sensible element is suitable for the non aggressive liquids and gases control. Part # Description Price DBET-5U Single stage capillary thermostat, -30…+30, step 1°, max 60°C (I) €49 DBET-16U Single stage capillary thermostat, -20…+90, step 2°, max 100°C (I) €51 Occupancy Detectors Trend - The ceiling mounted OCC/U Ultrasonic Occupancy Detection System is specifically designed for lighting control in open plan office environments. Several options are available to suit all user needs. Part # Description Power Distance Price OCC/UD/DC Ultrasonique detector, adustable in 1 direction, connects to IQ input (T) 24Vac 30m €75 OCC/UDA/DC Ultrasonique detector, adustable in 2 direction, connects to IQ input (T) 24Vac 30m €91 Phone: +353 1 45 75 421 Email: [email protected] 15 Specialists in BeMS Measurement & Control www.intelcontrols.com Misc Light Level Sensor Trend Controls - Light Level Sensor is an accurate lux calibrated light level sensor which can be used for monitoring and control applications. Part # Description Space Light Sensor (selectable 0 to 1000,2000, 4000, 8000 or 20000 Lux) (T) Outside Light Sensor (selectable 0 to 1000,2000, 4000, 8000 or 20000 Lux) (T) LLS LLO Input Range Output Price 4-20mA 0-20000 4….20ma €79 4-20mA 0-20000 4….20mA €79 Level Regulator Level regulators alow you start or stop valves when the level is reach. You can also control alarm, motor… It depend of your needs. Those sensors are designed for clear water and for a maximum of 3m immersion. Available special order up to 15m length Part # Description Temp IP Price 1CLRLG01/3PVC Level regulator, 10A, 250V, 0…50°C, IP68, 1.5Bar max, PVC cable 3m, clean water (P) 0…50°C IP68 €11 SQ01 Level regulator, 10A, 250V, -40…85°C, IP65, Diff: 10/14mm (I) -40…85°C IP65 €58 Movement Detectors Electric Perry - Movement detectors are electronic switches controlled by a passive infrared sensor being sensitive to heat radiations emitted by moving people. The movement detector activates the connected devices (ex. lamp activation) when detects a movement within its covered area; it will be deactivated with a time delay adjusted by the user.An adjustable photocell lighting sensor inhibits the activation of lighting according to environmental brightness.The detectors are used to switch on the lights in premises that are used only for brief periods: garages, access paths and entrances to houses, arcades, staircases, corridors, toilets, etc. Part # Description Power Angle Detection Price 1SPSP001 Movement detectors, 110°, Swivelling angle: 180Hor, 15 Vert, 230V powered, 12m range, light (5-1000lx), IP44, shut-off delay 8s-12min (P) 230V 180°/15° 12m €14 1SPSP020 Movement detectors,360°, 230V powered, 14m range, light (5-1000lx), IP20, shut-off delay 3s-14min (P) 230V 360° 14m €26 Rain Detectors The WS/R rain detector is suitable for outdoor use. The sensing part of the probe is an etched area which consists of three carbon electrodes separted by a waterproff resin. The sensing area is smooth to allow water droplets to run off more easily and it should be mounted at a 30° to 40° angle to assit this. Part # Description Price WS/R Rain detector (no bracket), IP67 housing, 24Vac powered, On/Off output. (T) €338 Phone: +353 1 45 75 421 Email: [email protected] 16 Specialists in BeMS Measurement & Control www.intelcontrols.com Humidity Humidity and Temperature Sensors Combined Sensors Greystone's SP series temperature transmitter incorporates setpoint controls for temperature adjustment and LCD for configuration and local indication of all parameters in one attractive wall mount enclosure. Both measurements and setpoint signals are continuously available on separate outputs as linear 4-20mA, 0-5 or 0-10 Vdc signals. Several operating parameters can be programmed using a keypad for specific applications including four temperature ranges and C/F display. Combined sensor provides a wall mounted relative humidity measurement combined with temperature measurement. The certified 2% high accuracy and standard 3% versions offer excellent linearity and stability over a wide humidity range. Features include: Parts # Description Price SP-01-I20 Humidity transmiter, RH setpoint control, 0…95% range, 24Vac/dc powered, 4…20mA output, 10kΩ, wall mount (G) €107 SP-03-I20 SP-04-I20 SP-05-I20 SP-01-V10 SP-03-V10 SP-04-V10 SP-05-V10 Humidity and temperature transmiter, 0…95% range, 0…50° 24Vac/dc powered, 4…20mA output, 10kΩ, wall mount (G) Humidity and temperature transmiter, temperature setpoint control, 0…95% range, 0…50° 24Vac/dc powered, 4…20mA output, 10kΩ, wall mount (G) Humidity and temperature transmiter, RH setpoint control, 0…95% range, 0…50° 24Vac/dc powered, 4…20mA output, 10kΩ, wall mount (G) Humidity transmiter, RH setpoint control, 0…95% range, 24Vac/dc powered, 0…10V output, 10kΩ, wall mount (G) Humidity and temperature transmiter, 0…95% range, 0…50° 24Vac/dc powered, 0…10V output, 10kΩ, wall mount (G) Humidity and temperature transmiter, temperature setpoint control, 0…95% range, 0…50° 24Vac/dc powered, 0…10V output, 10kΩ, wall mount (G) Humidity and temperature transmiter, RH setpoint control, 0…95% range, 0…50° 24Vac/dc powered, 0…10V output, 10kΩ, wall mount (G) €123 Parts # Description Price HT/S Room Humidity 4-20 mA (3%) + Temp (T) €109 HT/S/2% Room Humidity 4-20 mA (2%) + Temp (T) €158 HT/D Duct Humidity 4-20 mA (3%) + Temp (T) €138 HT/D/2% Duct Humidity 4-20 mA (2%) + Temp (T) €179 HT/O Outside Humidity 4-20 mA + Temp (T) Room Combined transmitter, 24…35Vdc/24Vac, 2x0…10V output, (3%) Temp (I) €352 TUTA0111 €130 TUTA0212 Room Combined transmitter, 11…24Vdc, 2x4…20mA , (3%) + Temp (I) €107 TUTE0121 Outside Combined transmitter , 24…35Vdc/24Vac, 2x0…10V output, (3%)+ Temp (I) €107 TUTE0222 Outside Combined transmitter, 11…24Vdc, 2x4…20mA output, (±3%) + Temp (I) €110 TUTC0111 Duct Combined transmitter, 24…35Vdc/24Vac, 2x0…10V output, (±3%) + Temp (I) €109 TUTC0212 Duct Combined transmitter, 11…24Vdc, 2x4…20mA output, (±3%) + Temp (I) €111 CDPD111111 Room Humidity with Combined transmitter with remote setpoint controller, 0-10v + Temp (I) €284 Parts # Description Price DBKH-10 Duct hygrostats 30...100% rh, 5% rh, IP65 (I) €115 DBKH-10U Duct hygrostat 30...100% rh, 5% rh, IP65 (with knob€115 under the cover) DBZH-101 Room hygrostats 35...100% rh, 4% rh, IP30 (I) €38 DBZH-101U Room hygrostats 35...100% rh, 4% rh, IP30 (I) €38 €130 €107 €123 €130 €130 €92 Duct and Room Hygrostats Industrie technik - Relative humidity duct control in air conditioning systems with: setpoint adjustment with knob; control of 1 or 2 stage humidifiers and dehumidifiers. Well-suited in domestic, commercial and industrial areas with light pollution for various applications in air conditioning field: office and computer rooms; foodstuffs storehouse; greenhouses; textile, paper and printing industries; swimming pools. Switch capacity: 15 (8) A, 24...250 Vac. Protection: IP65, class I Phone: +353 1 45 75 421 Email: [email protected] 17 Specialists in BeMS Measurement & Control www.intelcontrols.com Humidifiers Electric Resistance Humidifiers Electrode Steam Humidifiers Humidi-tech is a compact, cabinet-style humidifier compatible with all water types (tap, softened, deionized and reverse osmosis), and it as numerous dispersion options. Both cover and tank are easy to remove for maintenance. It disperses steam through ductwork or directly into a space through matching space distribution. Includes vaporlogic4 controller. Parts # Description XT Series electrode humidifiers provide humidification for a wide range of buildings, including health care, commercial, industrial, and government facilities. Easy installation and minimal maintenance make XT Series one of the most affordable humidification systems to purchase and install. The XTP series is supply with Vaporlogic 4 controller (with ethernet and web interface). It enables you to have a remote acces to your BMS. Vaporlogic4 can also control the Fan or Heater helping you to improve your energy management. Price Parts # Description Price HT-2 Electric Resistance Humidifier, 400V powered, 2.7 Cap (Kg/h), 2kW, 8A, 44Kg operating, DV/RO. €4,303 XTP002 230V, 2kg/h, cylinder 194601-101/5, stainless steel housing (D) €2,294 HT-4 Electric Resistance Humidifier, 400V powered, 5.4 Cap (Kg/h), 4kW, 8.7A, 44Kg operating, DV/RO. €4,434 XTP003 230V, 5kg/h, cylinder 194601-101/5, stainless steel housing (D) €2,294 HT-6 Electric Resistance Humidifier, 400V powered, 8.2 Cap (Kg/h), 6kW, 13A, 56Kg operating, DV/RO. €4,667 XTP006 400V, 8kg/h, cylinder 194601-112, stainless steel housing (D) €2,518 HT-8 Electric Resistance Humidifier, 400V powered, 10.9 Cap (Kg/h), 8kW, 17.3A, 56Kg operating, DV/RO. €4,748 XTP010 400V, 14kg/h, cylinder 194601-016, stainless steel housing (D) €2,866 HT-10 Electric Resistance Humidifier, 400V powered, 13.6 Cap (Kg/h), 10kW, 15.2A, 56Kg operating, DV/RO. €4,911 XTP017 400V, 22kg/h, cylinder 194601-020, stainless steel housing (D) €3,184 HT-12 Electric Resistance Humidifier, 400V powered, 16.3 Cap (Kg/h), 12kW, 17.3A, 64Kg operating, DV/RO. €4,954 XTP025 400V, 34kg/h, cylinder 194601-025, stainless steel housing (D) €3,518 HT-14 Electric Resistance Humidifier, 400V powered, 17.5 Cap (Kg/h), 14kW, 20.2A, 64Kg operating, DV/RO. €5,002 XTP033 400V, 45kg/h, 2 x cylinder 194601-026, stainless steel housing (D) €4,066 HT-16 Electric Resistance Humidifier, 400V powered, 21.8 Cap (Kg/h), 16kW, 23.1A, 64Kg operating, DV/RO. €5,051 XTP042 400V, 57kg/h, 2 x cylinder 194601-026, stainless steel housing (D) €4,544 HT-21 Electric Resistance Humidifiers, 400V powered, 28.6 Cap (Kg/h), 21kW, 30.3A, 70Kg operating, DV/RO,portable or soflen water (D) €5,347 XTP050 400V, 68kg/h, 2 x cylinder 194601-026, stainless steel housing (D) €5,670 HT-25 Electric Resistance Humidifier, 400V powered, 34 Cap (Kg/h), 25kW, 36.1A, 70Kg operating, DV/RO €5,636 XTP066 400V, 91kg/h, 2 x cylinder 194601-025, stainless steel housing (D) €6,784 HT-30 Electric Resistance Humidifier, 400V powered, 40.9 Cap (Kg/h), 30kW, 43.3A, 72Kg operating, DDV/RO. €5,979 XTP083 400V, 113kg/h, 2 x cylinder 194601-026, stainless steel housing (D) €8,226 HT-34 Electric Resistance Humidifier, 400V powered, 46.2 Cap (Kg/h), 34kW, 49.1A, 72Kg operating, DV/RO. €6,197 XTP096 400V, 130kg/h, 2 x cylinder 194601-026, stainless steel housing (D) €9,236 Phone: +353 1 45 75 421 Email: [email protected] 18 Specialists in BeMS Measurement & Control www.intelcontrols.com Humidifiers Electrode Steam Humidifiers Electrode Steam Humidifiers Cylinders XT Series electrode humidifiers provide humidification for a wide range of buildings, including health care, commercial, industrial, and government facilities. Easy installation and minimal maintenance make XT Series one of the most affordable humidification systems to purchase and install. Standard control panel. Parts # XTS002 XTS033 XTS066 Spare part for XTP and XTS products Parts # Description Price 194601-101/5 Cynlinder for XTP002, XTP003, XTS002, XTS003, XTR (D) €67 Description Price 194601-112 Cynlinder for XTP006, XTS006 (D) €103 230V, 2kg/h, cylinder 194601-101/5, galvanized steel housing (D) €1,868 194601-016 Cynlinder for XTP010, XTS010 (D) €123 194601-020 Cynlinder for XTP017, XTS017 (D) €177 194601-025 Cynlinder for XTP025, XTP050, XTS025 (D) €215 194601-026 Cynlinder for XTP033, XTP042, XTP066, XTP083, XTS033, XTS042 (D) €245 400V, 45kg/h, 2 x cylinder 194601-026, galvanized steel housing (D) 400V, 8kg/h, cylinder 194601-112, galvanized steel housing (D) €1,868 €2,014 * Shipping Cost Not Included XTS010 400V, 14kg/h, cylinder 194601-016, galvanized steel housing (D) €2,294 XTS017 400V, 22kg/h, cylinder 194601-020, galvanized steel housing (D) €2,546 XTS025 400V, 34kg/h, cylinder 194601-025, galvanized steel housing (D) €2,814 XTS033 400V, 45kg/h, 2 x cylinder 194601-026, galvanized steel housing (D) €3,252 XTS042 400V, 57kg/h, 2 x cylinder 194601-026, galvanized steel housing (D) €3,634 Electrode Steam Humidifiers The XTR electrode humidifier provides humidification for a wide range of buildings, including residential and light commercial applications. Features •Easy to operate •Easy to maintain — just replace the cylinder •Affordable to buy; economical to operate •Disperse steam into ductwork or open spaces •Steam capacities from 4 to 8 lbs/hr (1.8 to 3.6 kg/h) •Automatic drain and fill events for optimized humidifier performance based on water type * Shipping Cost Not Included Steam Distribution Blowers Steam blowers mount on top of humidifiers or remotely to quietly disperse steamwithin a room. Parts # Description Price SDU-003E Steam Blower 230V, 3.5kg/h (D) €862 SDU-006 Steam Blower 230V, 9kg/h (D) €996 SDU-017 Steam Blower 230V, 23kg/h (D) €1,348 Parts # Description Price XTR 230V, 3.5kg/h, cylinder 194601-101/5, galvanized steel housing (D) €1,130 * Shipping Cost Not Included Phone: +353 1 45 75 421 Email: [email protected] 19 Specialists in BeMS Measurement & Control www.intelcontrols.com Humidifiers Gas Humidifiers (lowest operating cost) GTS - gas to steam, provides a broad capacity range and precise control, it is compatible with all water types: tap, softened, deionized, and reverse osmosis. Application flexibility makes GTS the ideal choice for almost any application. It has steam capacities from 21.7 to 272 kg/h and has the lowest operational cost. The steam to steam (STS) humidifier transfers energy from boiler steam through a heat exchange to a replenishing supply of clean fill water and boils it into steam. Includes VaporLogic4 controller. Parts # Description Price GTS 100 Gas humidifier, 230V powered, 34 Cap(Kg/h), 29kW, 2.8A, 170Kg shipping, 320Kg operating, 185.5L tank, 38.1L/h, Vaporlogic 4 and tank insulation included (D) GTS 200 Gas humidifier, 230V powered, 68 Cap(Kg/h), 59kW, 2.8A, 170Kg shipping, 320Kg operating, 185.5L tank, 68.1L/h, Vaporlogic 4 and tank insulation included (D) GTS 300 Gas humidifier, 230V powered, 102 Cap(Kg/h), 88kW, 4A, 205Kg shipping, 385Kg operating, 200.6L tank, 102.2L/h, Vaporlogic 4 and tank insulation included (D) GTS 400 Gas humidifier, 230V powered, 136 Cap(Kg/h), 117kW, 4A, 205Kg shipping, 385Kg operating, 200.6L €18,074 tank, 136.3L/h, Vaporlogic 4 and tank insulation included (D) €11,086 €12,528 €16,333 Parts # Description Price GTS 500 Gas humidifier, 230V powered, 170Cap(Kg/h), 147kW, 5.5A, 270Kg shipping, 500Kg operating, 287.7L tank, 170.3L/h, Vaporlogic 4 and tank insulation included (D) €22,661 GTS 600 Gas humidifier, 230V powered, 204Cap(Kg/h), 176kW, 5.5A, 270Kg shipping, 500Kg operating, 287.7L tank, 204.4L/h, Vaporlogic 4 and tank insulation included (D) €26,304 GTS 700 Gas humidifier, 230V powered, 238Cap(Kg/h), 205kW, 7A, 320Kg shipping, 635Kg operating, 336.9L €27,578 tank, 238.5L/h, Vaporlogic 4 and tank insulation included (D) GTS 800 Gas humidifier, 230V powered, 272Cap(Kg/h), 234kW, 7A, 320Kg shipping, 635Kg operating, 336.9L €29,479 tank, 272.5L/h, Vaporlogic 4 and tank insulation included (D) Steam Heat Exchanger Humidifier DRI-STEEM's STS and LTS humidifiers are economical, using heat from steam boilers or hot liquid boilers to produce high-quality, chemical-free steam. They are compatible with all water types: tap, softened, deionized, and reverse osmosis. The steam-to-steam (STS) humidifier transfers energy from boiler steam through a heat exchanger to a replenishing supply of clean fill water and boils it into steam. Features Parts # Description Price STS 25S Steam heat Exchanger humidifier, 16 Cap (Kg/h), 43Kg shipping, 72Kg operating (D) €7,327 STS 50S Steam heat Exchanger humidifier, 36 Cap (Kg/h), 57Kg shipping, 152Kg operating (D) €9,634 STS 100S Steam heat Exchanger humidifier, 68 Cap (Kg/h), 63Kg shipping, 159Kg operating (D) €12,117 STS 200S Steam heat Exchanger humidifier, 177 Cap (Kg/h), 111Kg shipping, 386Kg operating (D) €14,843 STS400 SNS Steam heat Exchanger humidifier, 289 Cap (Kg/h), 145Kg shipping, 431Kg operating (D) €18,205 STS800 SNC Steam heat Exchanger humidifier, 555 Cap (Kg/h), 186Kg shipping, 658Kg operating (D) €22,718 Phone: +353 1 45 75 421 Email: [email protected] 20 Specialists in BeMS Measurement & Control www.intelcontrols.com Humidifiers Ultra-Sorb LH & LV Steam Dispersion Panel Single Dispersion Tubes & Accessories Dristeem Insulated Dispersion Tubes produce less condensate and therefore have more steam available for humidification, increasing the capacity of each tube. As a result, fewer tubes may be required to meet application requirements, further lowering condensate production and heat gain while reducing resource consumption and cost. Parts # Description Price LV Ultra-sorb Steam dispersion Panel, 305x305 to 3660x3660m, pressurized, evaporative, 1815Kg/h Please Call Steam capacity, >345kPa, vertical airflow, for Price Atmospheric/Pressurized condensate drain (D) Ultra-sorb Steam dispersion Panel, 305x305 to 3050x3050m, pressurized, evaporative, 1815Kg/h Please Call Steam capacity, >345kPa, horizontal/vertical For Price airflow, Atmospheric/Pressurized condensate drain (D) LH Ultra-Sorb XV Steam Dispersion Panel Model XV: Highest performance Integral condensate management. An industry first for pressurized steam, Ultra-sorb Model XV vaporizes dispersion-generated condensate and returns pressurized condensate to the boiler without additional pumps, valves, vents, or controls. Most efficient dispersion. • Zero water waste. All condensate returns to the boiler while still hot, saving energy, water, and boiler chemicals. • Lowest heat gain. High-Efficiency Insulated Tubes and an insulated steam delivery header reduce airstream heat gain by up to 85%. Single dispersion tubes are an excellent choice for lower capacity applications. Add tubes for more capacity. Steam capacities of up to 38Kg/h. Parts # Description Price 183948-0235 Single dispersion tubes, DN40, 600mm, with drain (D) €144 183948-0295 Single dispersion tubes, DN40, 750mm, with drain (D) €158 183948-0355 Single dispersion tubes, DN40, 900mm, with drain (D) €171 183948-047 Single dispersion tubes, DN40, 1205mm, with drain (D) €203 183954-0235 Single dispersion tubes, DN50, 600mm, with drain (D) €171 183954-0295 Single dispersion tubes, DN50, 750mm, with drain (D) €203 183954-0355 Single dispersion tubes, DN50, 900mm, with drain (D) €232 183954-047 Single dispersion tubes, DN50, 1205mm, with drain (D) €241 305400-010 Hose 3m DN40 (D) €437 305560-0010 Hose 3m DN50 (D) €509 162715 Y connector DN40 (D) €540 162717 Y connector DN50 (D) €540 162717-002 Y connector DN50 - 2x DN40 (D) €540 Rapid-Sorb Steam Dispersion Panel Rapid-sorb dispersion tube systems are designed for applications where multiple tubes are needed to accommodate load and/or when available non-wetting distance is limited. Steam capacities up to 2100 lbs/hr (953 kg/h) Parts # Description Price XV Ultra-sorb Steam dispersion Panel, 305x305 to 3660x3660m, pressurized, 730Kg/h Steam Please Call capacity, 35...345kPa, vertical airflow, Pressurized for Price condensate drain (D) Parts # Description Rapid Sorb Rapid-sorb, up to 360Kg/h, 254x254mm and up, vertical/horizontal airflow (D) Phone: +353 1 45 75 421 Email: [email protected] Price Please Call for Price 21 Specialists in BeMS Measurement & Control www.intelcontrols.com Pressure Liquid Differential Pressure Switch/Sensors Air Differential Pressure Switch Trend - The DPIL is suitable for measurement of differential pressures across pumps, boilers, chillers, filters etc in HVAC applications. The use of thick film resistances fixed on a ceramic chip gives no mechanical aging or creepage. The sensor is loop-powered giving a 4 to 20 mA signal equivalent to the measuring range. Electrical connection is via a DIN (4350-A IP65 connector supplied) and pressure connections are screw compression fittings for 6mm pipe. It is supplied complete with a mounting bracket. Part # Description DPIL/0.5 Liquid differential pressure sensor, 11-33V, 0…0.5Bar, -15…80°C, 4…20mA, max 3 bar overload, Ruptive pressure 37.5 bar, IP65 €191 Liquid differential pressure sensor, 11-33V, 0…1Bar, 15…80°C, 4…20mA, max 5 bar overload, Ruptive pressure 37.5 bar, IP65 €191 Liquid differential pressure sensor, 11-33V, 0…2.5Bar, -15…80°C, 4…20mA, max 12 bar overload, Ruptive pressure 37.5 bar, IP65 €191 Liquid differential pressure sensor, 11-33V, 0…4Bar, 15…80°C, 4…20mA, max 12 bar overload, Ruptive pressure 37.5 bar, IP65 €191 Liquid differential pressure sensor, 11-33V, 0…6Bar, 15…80°C, 4…20mA, max 12 bar overload, Ruptive pressure 37.5 bar, IP65 €191 Liquid differential pressure sensor, 11-33V, 0…10Bar, 15…80°C, 4…20mA, max 12 bar overload, Ruptive pressure 37.5 bar, IP65 €191 Liquid differential pressure switch, 40…200mBar, 10…80°C,250V contact,max 10 bar, IP54 (T) €105 DPIL/1 DPIL/2.5 DPIL/4 DPIL/6 DPIL/10 DPSL/L DPSL/H Pressure switches for air can be used as excess pressure, negative pressure and differential pressure switches for air and other non-flammable gases. They monitor extremely slight pressure differences and trigger switch-on, switch-off or switch-over operations if a set value is reached. Fields of application include air flow monitoring, fan monitoring or filter monitoring on intake and extract ventilation systems, on air-conditioning systems and in kitchens, frost-protection control on heat exchangers and closed-loop control of butterfly valves for air and fire dampers. Price Liquid differential pressure switch, 150…1000mBar, 10…80°C,250V contact,max 10 bar, IP54 (T) Part # Description DPSA-200 Air differential pressure switch, 250V, 20…200Pa Range, max 5000Pa, 1.5A switch capacity, IP54 €19 DPSA-400 Air differential pressure switch, 250V, 40…400Pa Range, max 5000Pa, 1.5A switch capacity, IP54 €19 DPSA-1000 Air differential pressure switch, 250V, 200…1000Pa Range, max 5000Pa, 1.5A switch capacity, IP54 €19 CPS330 Air differential pressure switch,24V/250V, 20…330Pa Range, max 5000Pa, 8-18Pa switch capacity, IP54 €22 CPS1100 Air differential pressure switch, 24V/250V, 100…1100Pa Range, max 5000Pa, 8-18Pa switch capacity, IP54 €22 DBL-205C Air differential pressure switch, 0.2...3.0 mbar (range), 0.1 ± 15%mbar (hysteresis), 100mbar max pressure. €18 Air differential pressure switch, 2…10mbar (range), DBL-205D 1.0 ± 15% mbar (hysteresis), 100mbar max pressure. Price €18 €105 Connection set with 2 PVC (5x8) duct connectors, Tubing kit 2m cable flexible PVC tube, and 4 screws for differential pressure switches and transmitters €3 Add us on LinkedIn, Facebook and Google+ now to find out the latest news, special offers, new products and lots more! Phone: +353 1 45 75 421 Email: [email protected] 22 Specialists in BeMS Measurement & Control www.intelcontrols.com Pressure Liquid Pressure Sensors Liquid Pressure Tranducer Trend Pressure Current Sensor, Liquid - High accuracy gauge pressure sensor for liquids in HVAC applications - Kind of pressure: gauge - Pressure connection: G1/2 (BSP) male thread. - Electrical connection: M12 two part connector - Protection class: IP67 - Housing material: medium is only in contact with the stainless steel housing and the ceramic chip making the sensor suitable for use with all normal cleaning materials. - Sensing method: piezoresistive - Media temp.: -25...125C - Media temp. limit: Steam pigtail, required if used on steam or water above 85 oC (typically drops from 200 oC to ambient from medium to sensor) - Medium: liquid/gaseous - Ambient temperature: ...85C - Output signal: 4..20mA The P499 Series is a new global Pressure Transducer with an excellent price performance ratio. The P499 exceeds the latest industrial CE/UL requirements including surge protection, and is over voltage protected in both positive and reverse polarity. The P499 is designed to produce a linear analogue signal based on the sensed pressure. The pressure port is machined from a solid piece of 17-4PH stainless steel. There are no O-rings or welds that are exposed to the pressure media. This results in a leak proof ,all metal sealed pressure system which withstand more than 10 million pressure cycles without failure. Pressure range: 0...10bar Max. pressure: 25bar Part # Description Liquid pressure transducer, 9…32V powered, P499ABH-401C 1…8 bar, max 85°C, 4…20mA output, max 16 bar overload, IP67 (JC) Part # PIL3/4 PIL3/6 PIL3/10 PIL3/25 ACC/SP Liquid pressure transducer, 9…32V powered, P499ABH-404C 0…30 bar, max 85°C, 4…20mA output, max 60 bar overload, €109 Liquid Pressure Sensor, 8…33V, 0…4Bar, max 85°C, 4…20mA output, max 10 bar overload, IP67 IP67 (JC) Description Price €109 Liquid Pressure Sensor, 8…33V, 0…6Bar, max 85°C, 4…20mA output, max 15 bar overload, IP67 transducer, 9…32V powered, Liquid pressure P499VBH-401C 1…8 bar, max 85°C, 0…10V output, max 16 bar €109 Liquid Pressure Sensor, 8…33V, 0…10Bar, max 85°C, 4…20mA output, max 25 bar overload, IP67 overload, IP67 (JC) €109 Liquid Pressure Sensor, 8…33V, 0…25Bar, max 85°C, 4…20mA output, max 62.5 bar overload, IP67 Liquid pressure transducer, 9…32V powered, P499VBH-404C 0…30 bar, max 85°C, 0…10V output, max 60 bar Steam pigtail for use with steam or water above €29 overload, IP67 (JC) 80°C (T) Price €88 €88 €96 €96 Air Differntial Pressure Sensors Trend - High accuracy gauge pressure sensor for liquids in HVAC applications with a 4 to 20 mA output . The use of thick film resistances fixed on a ceramic chip gives no mechanical aging or creepage. Electrical connection is facilitated by a M12 two part connector with screw terminals and pressure connection is by way of a G1/2 (BSP) male thread sealed at back with manometer. Part # Description Price Air differential pressure sensor, 0…100Pa or DPIA-1000…250Pa, 15-30V, 4…20mA output, non aggressive 250 gas, 20kPa overload max, 0…50°C, IP54 (T) €138 Air differential pressure sensor, 0…250Pa or DPIA-2500…500Pa, 15-30V, 4…20mA output, non aggressive 500 gas, 20kPa overload max, 0…50°C, IP54 (T) €138 Air differential pressure sensor, 0…500Pa or DPIA-5000…1000Pa, 15-30V, 4…20mA output, non aggressive 1000 gas, 20kPa overload max, 0…50°C, IP54 (T) €138 Air differential pressure sensor, 0…1000Pa or DPIA-10000…2500Pa, 15-30V, 4…20mA output, non aggressive 2500 gas, 40kPa overload max, 0…50°C, IP54 (T) €138 Phone: +353 1 45 75 421 Email: [email protected] 23 Specialists in BeMS Measurement & Control www.intelcontrols.com Pressure Aluminium Lo-Flo Pitot Traverse S.A.P. Static Air Probe Air Monitor - The Aluminum Lo-flo combines many features of the FAN-E and theVOLU-probe/VS into a Pitot Traverse Station designed specifically to measure airflow in small round ductwork between 101mm and 203mm in diameter. Honeycomb air straightener combined with a multi-point, selfaveraging Fechheimer Pitot flow sensing probe provide the means of measuring low air volumes of 35 to 1700 CFM within 2% of actual airflow. Part # LO-flo 101 Description Price Corrosion resistant 3003Al, 101mm round duct, ( 25mm wide, 2mm thick, aluminium fusion welded flanges), 6mm brass compression type connection. LO-flo 127 Corrosion resistant 3003Al, 127mm round duct, ( 25mm wide, 2mm thick, aluminium fusion welded flanges), 6mm brass compression type connection (AM) LO-flo 152 Corrosion resistant 3003Al, 152mm round duct, ( 25mm wide, 2mm thick, aluminium fusion welded flanges), 6mm brass compression type connection (AM) LO-flo 177 LO-flo 203 Air Monitor - The S.A.P. and S.O.A.P. family of static air probes was designed for room or space pressurization applications here it is essentail that the static pressure level within a room or space, and that of a reference pressure (corridor, adjacent space, outdoor location, etc.), be accurately sensed, free of pulsations or effects of air movement in the vicinity of the sensing probe(s). 6mm stainless barb signal connection fitting. €299 €302 Part # Description Price MODEL P Pipe Mounted Stainless Steel Construction. 12 FPT signal connection (AM) €223 MODEL S Surface Mount Stainless Steel Construction. (AM) €223 MODEL R Recess Mounted Stainless Steel Construction (AM) €223 Model P-SS Pipe mounted Stainless Steel Construction, 12 FPT signal connection (AM) €438 Model S-SS Surface mount Stainless Steel Construction (AM) €438 Model R-SS Recess mounted Stainless Steel Construction (AM) €438 S.O.A.P connection 2'' FTP signal connection Stainless Steel Construction (AM) €877 €309 Corrosion resistant 3003Al, 177mm round duct, ( 25mm wide, 2mm thick, aluminium fusion welded flanges), 6mm brass compression type connection (AM) €320 Corrosion resistant 3003Al, 203mm round duct, ( 25mm wide, 2mm thick, aluminium fusion welded flanges), 6mm brass compression type connection (AM) €336 Low Pressure Tansducers Greystone - LP Low Pressure Transducer is used to measure differential pressure in the ranges of 30 to 250 Pa. Accuracies total: ± 1% F.S.O, Output: 0…10v 4..20mA selectable STAT - Probe Static Pressure Multiple static pressure sensing ports positioned along the length provide a measurement of static pressure accurate to within 23% of actual pressure. Part # Description Price STAT 508 rectangular or round 508mm (AM) €184 STAT 914 rectangular or round 914mm (AM) €215 STAT 1524 rectangular or round 1524mm (AM) €266 Part # Description Power LP2-A-05 Low Pressure Transducer, 0 to 200/400Pa, No display 12-28 4-20mA / vac/15- 0 - 200/400 0-5VDC /0- €76 10vdc 35vdc LP2-A-06 Low Pressure Transducer, 0 to 500/ 1000Pa, No display 12-28 4-20mA / vac/15- 0-500 /1000 0-5VDC /0- €76 10vdc 35vdc Phone: +353 1 45 75 421 Email: [email protected] Pressure Output Price 24 Specialists in BeMS Measurement & Control www.intelcontrols.com Flow Air/Liquid Flow Switches FAN-E airflow Measuring Station Air flow switches have been designed for flow providing air or nonaggressive gases. The flow switches are typically installed in air conditionning systems or air handling units. Liquid flow switches are designed for water or non-aggressive liquid. The Air Monitor Fan-E is a multi-point, self averaging Pitot Traverse Station with integral air straightener-equalizer honeycomb cell, capable of continuously measuring fan discharges or ducted airflow with a certified accuracy of 2% or better when tested according to AMCA 610. Part # Description DBSL-1E Air flow switches 8.0m/s max cut-out, 85°C max air temperature, IP65 (I) DBSF-2RE Liquid flow switches 1…8"Øpipe, 30bar max pressure, Agressive media, IP65 (I) €112 DBSF-1E Liquid flow switch,1…8" pipe, 11 bar max, body in brass (normal media), IP65 (I) €44 Liquid flow switches 8.0m/s max cut-out, 70°C max air temperature, IP30 (I) €65 Air flow switches 8.0m/s max cut-out, 85°C max air temperature, IP65 (I) €61 FD113 JSL1-E Price €31 Part # Description Price FAN-E 508 Airflow measuring station, rectangular 508mm x 508mm, 0…150°C, 14 gauge galvanized sheetmetal, up to 3600 x 3600 flange €43 FAN-E 1016 Airflow measuring station, rectangular 1016 x 1016, 0…150°C, 14 gauge galvanized sheetmetal, up to 3600 x 3600 flange (AM) €122 FAN-E 1524 Airflow measuring station, rectangular 1524mm x 1524mm, 0…150°C, 14 gauge galvanized sheetmetal, up to 3600 x 3600 flange €277 FAN-EC 508 Airflow measuring station, round 508Ø, 0….150°C, 18 Gauge galvanized sheetmetal, 609Ø x 25mm flange €466 FAN-EC 1016 Airflow Measuring Station, round 1016Ø, 0….150°C, 18 gauge galvanised sheetmetal, 609Ø x 25mm flange €1,094 Air Velocity Sensor, Duct Trend - The AV/D velocity sensor is designed for use in the HVAC industry to give accurate single point measurement of duct air velocity. The measuring method is based on the hot film anemometer principle using special thin film sensor elements. The special construction of the sensor provides easy mounting by producing a very all directional dependency over the range -20 to +20 degrees of rotation. The output (current or voltage), velocity measuring range, and response time can be selected by internal links. Part # Description Price AV/D/10 Air velocity sensor, 24V powered, 0…10 or 0…20 m/s range, 0…10V or 4…20mA output, IP65 €158 Phone: +353 1 45 75 421 Email: [email protected] 25 Specialists in BeMS Measurement & Control www.intelcontrols.com Air - CO2-CO Sensors Air Quality Sensors Wind Speed Sensor For detection of unpleasant odours, tobacco smoke, and vapours emitted by such materials as furniture, carpets, paint, glue, etc. CO and CO2 sensors available too. Trend Controls - Wind speed/speed and direction for building applications where the control strategy needs to respond to outside weather conditions. Part # Description Price WS/S Wind Speed Sensor (c/w bracket) (T) €655 WS/SD Wind speed and direction sensor (c/w bracket) (T) €1,066 WS/S Bearing Wind speed sensor, 24 V powered, Wind speed kit bearing kit (x2) (T) €102 WS/SD Bearing kit Wind speed sensor, 24 V powered, Wind speed and direction bearing kit (x3) (T) €116 Wind speed sensor, 24 V powered, Wind speed and direction bearing kit and potentiometer (x3) (T) €492 €119 WS/SD Bearing kit + pot WS/S & D CUPS (3PKT) Wind speed Cups (x3) (T) €34 Part # Description Price AIR300D Duct Air Quality Monitor Controller, c/w 0-10 Vdc stepped output, 20….30v €124 AIR300AE Executive Space Air Quality Monitor, c/w 0-10 Vdc stepped output, 20….30v AQ/S Space Air Quality Sensor (24 Vdc supply, 0 to 10 Vdc output), 15-32vdc €158 AQ/D Duct Air Quality Sensor (24 Vdc supply, 0...10 Vdc output), 24Vdc, 0….40C €201 Combined CO2 Sensors DB-RLQ Room air quality transmitter, 0…10Vdc, 0…20mA, 4…20mA outputs, 24Vac/dc (I) DB-KLQ Duct air quality transmitter, 0…10Vdc, 0…20mA, 4…20mA outputs, 24Vac/dc (I) €184 €251 CO Sensors Part # Description Price RGICO0L42 1 zone central unit for max 1 gas internal sensor, 230V (S) €715 CMD5B9000 Air-CO sensor, duct type, 15…95% humidity, 0…10V, 0…20mA, 4…20mA outputs jumper selectable, 15….30vAC/DC, -20…50C (G) €158 Part # Description Price DB-RCO2 Room air quality + CO2 transmitter, 0…10Vdc, 0…20mA, 4…20mA outputs (I) €490 DB-KCO2 Duct air quality + CO2 transmitter, 0…10Vdc, 0…20mA, 4…20mA outputs, 24Vac/dc (I) €557 CO2/T/D Air-CO2 sensor, duct type, 15…95% humidity, 0…10V output, 15…30vDC, -20….60C (T) €324 Air-CO2 sensor, space type, 15…95% humidity, CO2/T/DISP/S Display, 0…10V output, 15….30vDC, 0….40C (T) €247 Air-CO2 sensor, space type, 15…95% humidity, CO2/T/H/DIS Display + humidity, 0…10V output, 15….30vDC, P/S 0….40C (T) €315 CO2/T/H/S Air-CO2 sensor, space type, 15…95% humidity, Humidity, 0…10V output, 15….30vDC, 0….40C (T) €299 CO2/T/S Air-CO2 sensor, space type, 15…95% humidity, 0…10V output, 15….30Vdc, 0….40C (T) €224 Phone: +353 1 45 75 421 Email: [email protected] 26 Specialists in BeMS Measurement & Control www.intelcontrols.com I/O Modules Input & Output Modules Current Tranformers Trend I/O Modules convert either digital input signals into an analogue signal to be read by the controller, or an analogue signal from the controller to a number of stages of relay output. They act as an interface between the controller and heating and ventilating equipment. Part # Description Price CT/150S Split Core rated 150 A (40 mm x 40 mm) -1 VA (T) €74 CT/200S Split Core rated 200 A (65 mm x 50 mm) -1.5 VA (T) €74 Part # Description TRM12 Single relay module €3 4DIX/24VAC Trend 4-Digital Input Expander Module (4 x DI to Single AI) (T) €45 SRMAC Trend Single Relay Module (24 Vac SPCO) (T) €10 CT/250S Split Core rated 250 A (65 mm x 50 mm) - 2.5 VA (T) €74 SRMV Trend Single Relay Module (Voltage SPCO)(T) €10 CT/400S Split Core rated 400 A (65 mm x 50 mm) - 5 VA (T) €75 2SRM/24VAC Trend Two Single Relays Module €32 CT/800S Split Core rated 800 A (65 mm x 50 mm) - 5 VA (T) €75 2RM/24VAC Trend 2-Relay Module 24 Vac/dc (RLM & HLM funct) (T) €31 3RM/24VAC Trend 3-Relay Module(TRM & HCM funct)(T) €37 CT/1000S Split Core rated 1000 A (95 mm x 45 mm) - 5 VA (T) €77 6RM/24VAC Trend 6-Relay Module (CRM function) (T) €75 CT/1500S Split Core rated 1500 A (60 mm x 50 mm) - 5 VA (T) €77 CT/1600S Split Core rated 1600 A (130 mm x 80 mm) -5VA (T) €77 CT/2000S Split Core Type 2000 A (130 mm x 80 mm) -5VA (T) €84 RIBXKTF Fixed current sensor €21 RIBXKTA Adjustable current sensor €37 2VID/24VAC DPCM/24VAC MOD2RM Price Trend - Current transformers. The CT system range of split core current transformers are designed for use in conjunction with the IQ system EM Series Electricity Meters (not EM/RX) or any other suitable meter. They are tape wrapped and are complete with 1 metre length flying leads. These transformers are available in a number of ratings to cater for all types of installation. Trend Two Voltage to Current Driver Module (2 x 0-20 mA Outputs) (T) Trend Dual Phase Cut Module (2 x Phase Cut Outputs) (T) Trend Controls Two Relay I/O module €49 €65 €16 Input & Output Modules Trend - Thyristor Controllers (solid state relays) provide a means of varying the voltage for electrically resistive loads, typically electric heating elements.The RN controllers are not suitable for switching lamps due to light flicker. Current Transducers Trend - Current Transducers . The CTX range of fully insulated split ring current transformers provide direct measurement of current flow and are intended for use in a wide range of applications or for low cost monitoring. Installation of the lightweight air core CTX is very easy. The unit is simply clipped around the conductor and secured with a cable tie. Part # Description RJ1P23V50E 1 Pole 230V 50A Thyristor Controller (T) €93 RJ1P48V50E 1 Pole 480V 50A Thyristor Controller (T) €100 RN2F48V30 RN2F48V50 2 Pole 480V 30A (15A per pole) Thyristor Controller (T) 2 Pole 480V 50A (25A per pole) Thyristor Controller (T) Price Part # Description CTX/200 CTX/500 €117 €128 Output Price Clip-on fully insulated Current Transducers (200A) 24 vdc (T) 0-10vdc €130 Clip-on fully insulated Current Transducers (500A) 24vdc (T) 0-10vdc €151 Phone: +353 1 45 75 421 Email: [email protected] 27 Specialists in BeMS Measurement & Control www.intelcontrols.com I/O Modules Split Core Current Sensors Heat Meters Trend - The CSENSOR series of retrofit (splitcore) current sensors are designed for fast and easy installation without the need to disconnect any loads. High precision units, they are equally suitable for Current or Power measurement - ideal for use with the EM-MPO/350e and the EM-MPO/400e multi-parameter electricity meters. The Trend HMM Series Mechanical Heat Meters are static compact energy meters with electronic measurement. Each meter consists of an electronic energy integrator with temperature sensors and a mechanical volume measuring component. HMM heat meters provide metering of heating and/or cooling energy in hydronic systems based on volume, and supply and return temperatures. HMM/H models are for energy metering of heating systems, ../HC models are for cooling or heat/cool systems. Used in conjunction with an RS232 and Mbus convertor and a Trend Part # Description CSENSOR/050 Split Core current sensor, 50 A nominal current for use with EM-MPO/350E, EM-MPO/400E (T) €184 CSENSOR/100 Split Core current sensor, 100 A nominal current for use with EM-MPO/350E, EM-MPO/400E (T) €184 CSENSOR/150 Split Core current sensor, 150 A nominal current for use with EM-MPO/350E, EM-MPO/400E (T) €184 CSENSOR/400 Split Core current sensor, 400 A nominal current for use with EM-MPO/350E, EM-MPO/400E (T) €229 CSENSOR/800 Price Split Core current sensor, 800 A nominal current for use with EM-MPO/350E, EM-MPO/400E (T) Trend - Electricity Meter Single Phase Electronic KWh meter for sub metering, with DIN rail mounting. Description EM3/D/ODIN Electricity meter, 230/400V, 10A, LED, -25…55°C, IP40, 100 pulse per kWh, External voltage, 540Vdc Price Electricity meter, 230/400V, 10A, LED, -25…55°C, EM3/CT/ODIN IP40, 100 pulse per kWh, External voltage, 540Vdc EM3/CT/N Electricity meter, 230/400V, 100A, Display, 10…65°C, IP52, 1000 pulse per kWh, External voltage, 100Vac max ACC/EM3/ODIN Optical mounting kit for panel door mounting of /PANELKIT EM3/ODIN meters (T) Description HMM/H/0.6/MOD Heat Meter, 10y battery, DN15, 0.6 flow rate, 110mm, Mbus, Heating (T) €240 HMM/H/1.5/MOD Meters, 10y battery, DN15, 1.5 flow rate, 110mm, Mbus, Heating (T) €240 HMM/H/2.5/MOD Meters, 10y battery, DN20, 2.5 flow rate, 130mm, Mbus, Heating (T) €250 HMM/HC/0.6/MOD Meters, 10y battery, DN15, 0.6 flow rate, 130mm, Mbus, Heat & cool (T) €313 HMM/HC/1.5/MOD Meters, 10y battery, DN15, 1.5 flow rate, 110mm, Mbus, Heat & cool (T) €313 HMM/HC/2.5/MOD Meters, 10y battery, DN20, 2.5 flow rate, 130mm, Mbus, Heat & cool (T) €320 HMM/HC/3.5/MOD Meters, 10y battery, DN25, 3.5 flow rate, 260mm, Mbus, Heat & cool (T) €569 HMM/HC/6.0/MOD Meters, 10y battery, DN25, 6 flow rate, 260mm, Mbus, Heat & cool (T) €569 HMM/HC/10/MOD Meters, 10y battery, DN40, 10 flow rate, 300mm, Mbus, Heat & cool (T) €674 TPW3-MBUS RS232/MBUS converter for up to 3 slave devices (meters) (T) €313 €275 Energy Meters Part # Part # €263 €222 Price €219 €39 EM-MPO/350 Electricity meter, 230V, 5W, Display, -10…65°C, IP20, 8 digits - compatible current trans (T) €242 TPW20-MBUS RS232/MBUS converter for up to 20 slave devices (meters) (T) €478 EM-MPO/350E Electricity meter, 230V, 5W, Display, -10…65°C, IP20, 8 digits - compatible current sensor (T) €242 HMAC/VALVE/15 G 1/2 internal thread ball valve with connection for temperature sensor (T) €53 HMAC/VALVE/20 G 3/4 internal thread ball valve with connection for temperature sensor (T) €60 EM-MPO/400 Electricity meter, 230V, 5W, Display, -10…65°C, IP54, 3 lines - compatible current trans (T) HMAC/VALVE/25 G 1 internal thread ball valve with connection for temperature sensor (T) €86 EM-MPO/400E Electricity meter, 230V, 5W, Display, -10…65°C, IP54, 3 lines - compatible current sensor (T) €217 €217 Phone: +353 1 45 75 421 Email: [email protected] 28 Specialists in BeMS Measurement & Control www.intelcontrols.com Gas Safety Equipment Gas cut-off valves CPI Switches Trend’s gas valves have been designed for the control and regulation of gaseous fluids in gas power burners, gas boilers, ovens, furnaces and other gas consuming appliances. The gas valves are all class “A” devices in accordance with EN161 and can be obtained with either threaded (GVS) or flanged (GVF) connections. They have been manufactured with aluminium die cast bodies suitable for natural gas, propane or air and are capable of operating up to 200 mbar pressure. Additionally the gas valves have an IP54 B980 protection class, suitable for most plantroom environments. Trend’s gas valves are of the non regulated ON/OFF normally closed type, with fast opening and closing times of less than 1 second. The GVS80-230, GVF65-230 and GVF80-230 all have adjustable maximum flow rates and if closed position indication (CPI) is required a range of optional switches is available. Trend Solenoid gas valve screwed, normally closed CPI switches Part # GVCPI-20-25 GVCPI-32-40 Description Trend Solenoid gas valve screwed, normally closed CPI switch Trend Solenoid gas valve screwed, normally closed CPI switch GVCPI-65F-80 Trend Solenoid gas valve screwed, normally closed CPI switch Trend Solenoid gas valve screwed, normally closed CPI switch GVCPI-100 Trend Solenoid gas valve flanged, normally closed CPI switch GVCPI-50 Price €49 €49 €49 €54 €54 Gas Detection Systems Part # Description Reset Price GVS20-230 Gas valve, screwed, 20mm, 230Vac, normally closed, automatic reset. (T) Auto €93 GVS25-230 Gas valve, screwed, 25mm, 230Vac, automatic reset, normally closed (T) Auto €100 GVS32-230 Gas valve, screwed, 32mm, 230Vac, automatic reset, normally closed (T) Auto €135 GVS40-230 Gas valve, screwed, 40mm, 230Vac, automatic reset, normally closed (T) Auto €144 GVS50-230 Gas valve, screwed, 50mm, 230Vac, automatic reset, normally closed (T) GVF65-230 Trend Solenoid gas valve flanged, normally closed, automatic reset, 220...240 Vac versions, Valve size: 2 1/2inch (T) GVF80-230 GVF100-230 Gas valve, normally closed, flanged, 80mm, 230Vac, automatic reset. Gas valve, flanged, 100mm, 230Vac, automatic reset, Valve size: 4inch (T) Auto Auto Auto Auto €173 Seitron - Microprocessor based gas detector with facility for the driving Slam shut cut-off valves. Supports multiple Zones. Part # Description Price RGI001MSX2 2 zone controller for 2 remote gas sensors , 230V (S) €148 RGI000MSX4 4 zone central unit for 4 gas leakage remote sensors , 230V (S) €268 RGIME1MSX2 2 zone central unit with internal sensor and 1 remote sensor, 230V (S) €180 SGIME1 Methane remote sensor , IP54 (S) €77 SGIGP1 Propane remote sensor , IP54 (S) €77 €415 €483 €931 Phone: +353 1 45 75 421 Email: [email protected] 29 Specialists in BeMS Measurement & Control www.intelcontrols.com Boiling, Chilled & Hot Water Wall Mounted Boilers Value Range Wall Mounted Boilers These powerful and stylish wall mounted water boilers are built to Instanta's rigorous quality standards. These boilers are ideal when space is at a premium. The unique Instanta digital display provides a clear indication of the boiler status, advance notice of scale build up and easy to read diagnosis of any service problems. Features also include ECO mode to enable you to switch to power saving half capacity during quiet spells. Thermistor control for constant temperatures of 98c. Large non drip tap. Long life incoloy element. Easy installation, maintenance, cleaning and de-scaling. WM3 WM3SS WM7 12mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, plastic case (In) €712 12mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, Stainless case (In) €806 25 mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, plastic case (In) €844 WM7SS 25 mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, Stainless case (In) €974 WM15-3SS 57mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, stainless case (In) €1,124 WM15-6SS 28 mins heat up time, 342 cups (57Ltrs) per hour, 3kw power rating, stainless case (In) €1,186 WM25SS 82/42 mins heat up time, 168/342 cups(28/57Ltrs) per hour, 3kw or 6kw power rating, stainless case (In) €1,303 Where space is at a premium and you need the keenest price, the value range wall mounted boilers are ideal. Following the huge success of the wall mounted boiler range, Instanta have added these new value models. Instead of the stylish moulded case these boilers use a simple stainless steel outer fabrication. Water byelaws approved, and built to Instantas usual rigorous quality standards, the value range uses advanced electronics which maintains the water at 98c. These boilers have boil dry protection, a long life incoloy element and a large non drip tap. We believe that these are the most competitively priced stainless steel wall mounted boilers available. WA2N 15 mins heat up time, 108 cups(18Ltrs) per hour, 2kw power rating, stainless case (In) €619 WA5N 18 mins heat up time, 162 cups (27Ltrs) per hour, 3kw power rating, stainless case (In) €663 WA10N 31 mins heat up time, 162 cups(27Ltrs) per hour, 3kw power rating, stainless case (In) €831 Cup carousel Capable of holding 60 (85mm max diameter) stacking cups and 60 saucers, these carousels revolve through a full 360°. Using only 200w power, the carousel will help you to serve piping hot drinks by substantially reducing the temperature drop caused by cold cups. Unlike some other carousels, Instanta carousels have unique protecting runners which prevent unsightly scratches to both the cups and the equipment. NEW IBC WEBSITE!! Check out our entire product range on our new ecommerce site!! www.intelcontrols.com No matter where you are our products can now be purchased online 24/7 making shopping at our store more convenient for you. You will also find on the new site our latest special offers which are updated regularly, any new products releases, case studies, newsletters and lots more! HCC60 Heated, 30 mins heat up time, 200w power rating (In) €956 CC60 Unheated model (In) €861 AF40 Heated cup holder (In) €400 AF40U Unheated cup holder (In) €374 Phone: +353 1 45 75 421 Email: [email protected] 30 Specialists in BeMS Measurement & Control www.intelcontrols.com Boiling, Chilled & Hot Water Counter top Boilers Value Range Counter top Boilers These new COUNTER TOP boilers incorporate the latest technology with state of the art electronics incorporating a digital display which reports the boiler status and provides easily readable early warning of limescale build up and full diagnosis of any component failure. Models incorporate our new ECO mode which allows you to switch the boiler to energy saving half capacity during your quiet periods. New modifications for 2010 models now include a 7 day timer and Filter Monitor. CT200 31 mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, (In) €856 CT300 16 mins heat up time, 342 cups (57Ltrs) per hour, 6kw power rating, (In) €951 CT2000 35 mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, plastic case (In) €825 CT4000-3 57 mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, twin taps (In) €1,025 CT4000-6 32 mins heat up time, 342 cups(57 Ltrs) per hour, 6kw power rating, stainless case (In) €1,106 CT6000-6 41 mins heat up time, 342 cups (57Ltrs) per hour, 6kw power rating, stainless case (In) €1,156 CT6000-9 27 mins heat up time, 510 cups(85Ltrs) per hour, 9kw 3 phase power rating, twin taps (In) €1,444 CT8000-6 57 mins heat up time, 342 cups(57Ltrs) per hour, 6kw power rating, twin taps (In) €1,700 CT8000-9 38 mins heat up time, 342 cups(57Ltrs) per hour, 9kw3 phase power rating, stwin taps (In) €1,994 For customers who are working on a budget and want Instanta quality and reliability but with slightly lower specification and less style we are pleased to offer them our value models. 1000-C 15 mins heat up time, 162 cups(27Ltrs) per hour, 3kw power rating, (In) €561 1500LCD 35 mins heat up time, 162 cups (27Ltrs) per hour, 3kw power rating, (In) €611 3000LCD 52 mins heat up time, 162 cups(27Ltrs) per hour, 3kw power rating, (In) €681 Counter top steam & water boilers Our largest and most powerful combined water boilers and steam injectors, these are a must for the very biggest and busiest kitchens with caterers looking for a varied beverage menu. With all the style of the auto fill boilers and wall mounted boilers, steam adds a further dimension by providing the power to heat milk, beverages, soups, sauces and anything else with a liquid base in super fast time. Advanced electronic controls. Large high pressure non-drip taps. Insulated for economy and user safety. Low voltage switching on all controls.Low voltage switching on all controls. Unique Instanta service codes provide advance warning of lime scale and can help in the diagnosis of any service problems. Powerful 14psi working pressure. Spill tray included. Vacuum relief and safety valves. Push button counter top boiler Ideal for self service, the boiler has an optional advanced programmable locking system. This allows the unit to be ready to use at the touch of an electronic key and is perfect for high security users or where Health & Safety is a concern. Comes with one free key. DB2000 35 mins heat up time, 168 cups(28 Ltrs) per hour, 3kw power rating (In) DB2000L Locking device for DB2000 €1,106 €16 WB-2 51 mins heat up time, 138 cups(23 Ltrs) per hour, 3kw power rating (In) €2,119 WB-2-6 27 mins heat up time, 306 cups(51 Ltrs) per hour, 6kw power rating (In) €2,244 Phone: +353 1 45 75 421 Email: [email protected] 31 Specialists in BeMS Measurement & Control www.intelcontrols.com Boiling, Chilled & Hot Water Under counter hot water dispenser Manual fill water boilers Suitable for anywhere from a small office to a football stadium these stylish chrome and stainless steel push button fonts are available with a choice of three powerful boilers. UCD7 UCD7/L UCD12 25 mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, (In) 25 mins heat up time, 168 cups (28Ltrs) per hour, 3kw power rating, tall font (In) 35 mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating (In) These high-quality electric urns have a fresh new design but are still proven performers because they are safe, reliable and long-lasting. A size to suit all needs. Polished stainless steel body with vented cool to touch ‘twist-tolock’ lid. 144 cups (24 ltrs) per hour for all four. MF10 10 litre super urn, 25 mins heat up time, 2.4kw power rating, (In) €286 MF20 20 litre super urn, 50 mins heat up time, 2.4kw power rating, (In) €299 MF30 30 litre super urn, 75 mins heat up time, 2.4kw power rating, (In) €324 MF40 40 litre super urn, 100 mins heat up time, 2.4kw power rating, (In) €336 €1,769 €1,869 €1,869 UCD12/L 35 mins heat up time, 168 cups(28Ltrs) per hour, 3kw power rating, tall font (In) €1,956 UCD47 65/95 mins heat up time, 42/63 Ltrs per hour, 4.5/6.7kw power rating (In) €2,219 UCD47/L 71/47 mins heat up time, 42/63 Ltrs per hour, 4.5/6.7kw power rating, tall font (In) €2,281 UCD47/D 71/47 mins heat up time, 252/378 cups(42/63Ltrs) per hour, 5/7.5kw power rating, double font (In) €2,863 Under counter chiller Built in collaboration with the Ministry of Defence this massive automatic fill water boiler is designed to serve hundreds. But you don't have to be in the military to need one of these machines. They are equally at home in sporting arenas, rock venues or any high volume site. Under counter chiller Under counter water chiller and cold water dispenser save on the cost of storing and buying bottled cold water, supplying fresh, filtered cold water on tap. UCCH1000 120 cups(20 Ltrs) per hour, 3kw power rating (In) €1,861 Combined boiler & chiller MOD18 45 mins heat up time, 1224 cups(204 Ltrs) per hour, 18kw power rating (In) €4,624 Provide a constant supply of filtered hot or cold water with the Instanta CH1000. This stylish auto fill model will provide all the beverage requirements for a busy office. Fresh chilled water between 3 & 9 C (depending upon ambient temperature). An end to bottled water - save cost, storage and heavy lifting.Unique Instanta service warning codes. Quality stainless steel case and boiler. Compact counter top unit.Low voltage switching on all controls. Long life incoloy boiler element. Easy installation. CH1000 10 mins heat up time, 168 cups(28 Ltrs) per hour, 3kw power rating (In) €1,775 Phone: +353 1 45 75 421 Email: [email protected] 32 Specialists in BeMS Measurement & Control www.intelcontrols.com Frequency Converters Variable Motor Speed Drives suitable for HVAC applications where the speed control of motors can be applied. They convert fixed frequency and voltage from the mains supply to variable frequency and voltage enabling motors to be used with maximum efficiency resulting in significant energy savings. The control keypad can be mounted on the front of the unit or can be remotely connected by way of a 2m cable and mounted on a panel or used as a handheld unit. The keypad accesses the startup wizard which facilitates the application configuration for the user (pump/fan, PID loops, multi-pump, cascade control). VSD2H series Part # Description Price Part # Description Price VSD2H/3P480/003B/IP21 Variable Speed Drive, 1.1kW, 380 to 480Vac, 0…320Hz, IP21 €492 VSD2H/3P480/003B/IP54 Variable Speed Drive, 1.1kW, 380 to 480Vac, 0…320Hz, IP54 €523 VSD2H/3P480/004B/IP21 Variable Speed Drives, 1.5kW, 380 to 480Vac, 0…320Hz, IP21 (T) €537 VSD2H/3P480/004B/IP54 Variable Speed Drives, 1.5kW, 380 to 480Vac, 0…320Hz, IP54 (T) €604 VSD2H/3P480/005B/IP21 Variable Speed Drives, 2.2kW, 380 to 480Vac, 0…320Hz, IP21 (T) €583 VSD2H/3P480/005B/IP54 Variable Speed Drives, 2.2kW, 380 to 480Vac, 0…320Hz, IP54 (T) €662 VSD2H/3P480/008B/IP21 Variable Speed Drives, 3kW, 380 to 480Vac, 0…320Hz, IP21 (T) €642 VSD2H/3P480/008B/IP54 Variable Speed Drives, 3kW, 380 to 480Vac, 0…320Hz, IP54 (T) €732 VSD2H/3P480/009B/IP21 Variable Speed Drives, 4kW, 380 to 480Vac, 0…320Hz, IP21 (T) €726 VSD2H/3P480/009B/IP54 Variable Speed Drives, 4kW, 380 to 480Vac, 0…320Hz, IP54 (T) €800 VSD2H/3P480/012B/IP21 Variable Speed Drives, 5.5kW, 380 to 480Vac, 0…320Hz, IP21 (T) €826 VSD2H/3P480/012B/IP54 Variable Speed Drives, 5.5kW, 380 to 480Vac, 0…320Hz, IP54 (T) €905 VSD2H/3P480/016B/IP21 Variable Speed Drives, 7kW, 380 to 480Vac, 0…320Hz, IP21 (T) €950 VSD2H/3P480/016B/IP54 Variable Speed Drives, 7kW, 380 to 480Vac, 0…320Hz, IP54 (T) €1,082 VSD2H/3P480/023B/IP21 Variable Speed Drives, 11kW, 380 to 480Vac, 0…320Hz, IP21 (T) €1,171 VSD2H/3P480/023B/IP54 Variable Speed Drives, 11kW, 380 to 480Vac, 0…320Hz, IP54 (T) €1,323 VSD2H/3P480/031B/IP21 Variable Speed Drives, 15kW, 380 to 480Vac, 0…320Hz, IP21 (T) €1,412 VSD2H/3P480/031B/IP54 Variable Speed Drives, 15kW, 380 to 480Vac, 0…320Hz, IP54 (T) €1,598 VSD2H/3P480/038B/IP21 Variable Speed Drives, 18.5kW, 380 to 480Vac, 0…320Hz, IP21 (T) €1,755 VSD2H/3P480/038B/IP54 Variable Speed Drives, 18.5kW, 380 to 480Vac, 0…320Hz, IP54 (T) €1,867 VSD2H/3P480/046B/IP21 Variable Speed Drives, 22kW, 380 to 480Vac, 0…320Hz, IP21 (T) €2,021 VSD2H/3P480/046B/IP54 Variable Speed Drives, 22kW, 380 to 480Vac, 0…320Hz, IP54 (T) €2,107 VSD2H/3P480/061B/IP21 Variable Speed Drives, 30kW, 380 to 480Vac, 0…320Hz, IP21 (T) €2,380 VSD2H/3P480/061B/IP54 Variable Speed Drives, 30kW, 380 to 480Vac, 0…320Hz, IP54 (T) €2,553 VSD2H/3P480/072B/IP21 Variable Speed Drives, 37kW, 380 to 480Vac, 0…320Hz, IP21 (T) €3,113 VSD2H/3P480/072B/IP54 Variable Speed Drives, 37kW, 380 to 480Vac, 0…320Hz, IP54 (T) €3,133 VSD2H/3P480/087B/IP21 Variable Speed Drives, 45kW, 380 to 480Vac, 0…320Hz, IP21 (T) €3,778 VSD2H/3P480/087B/IP54 Variable Speed Drives, 45kW, 380 to 480Vac, 0…320Hz, IP54 (T) €3,805 VSD2H/3P480/105B/IP21 Variable Speed Drives, 55kW, 380 to 480Vac, 0…320Hz, IP21 (T) €4,685 VSD2H/3P480/105B/IP54 Variable Speed Drives, 55kW, 380 to 480Vac, 0…320Hz, IP54 (T) €4,610 VSD2H/3P480/140B/IP21 Variable Speed Drives, 75kW, 380 to 480Vac, 0…320Hz, IP21 (T) €5,710 VSD2H/3P480/140B/IP54 Variable Speed Drives, 75kW, 380 to 480Vac, 0…320Hz, IP54 (T) €6,179 VSD2H/3P480/170B/IP21 Variable Speed Drives, 90kW, 380 to 480Vac, 0…320Hz, IP21 (T) €6,753 VSD2H/3P480/170B/IP54 Variable Speed Drives, 90kW, 380 to 480Vac, 0…320Hz, IP54 (T) €7,434 VSD2H/3P480/205B/IP21 Variable Speed Drives, 110kW, 380 to 480Vac, 0…320Hz, IP21 (T) €7,964 VSD2H/3P480/205B/IP54 Variable Speed Drives, 110kW, 380 to 480Vac, 0…320Hz, IP54 (T) €9,093 VSD2H/3P480/261B/IP21 Variable Speed Drives, 132kW, 380 to 480Vac, 0…320Hz, IP21 (T) €9,452 VSD2H/3P480/261B/IP54 Variable Speed Drives, 132kW, 380 to 480Vac, 0…320Hz, IP54 (T) €11,566 VSD2H/3P480/310B/IP21 Variable Speed Drives, 160kW, 380 to 480Vac, 0…320Hz, IP21 (T) €11,323 VSD2H/3P480/310B/IP54 Variable Speed Drives, 160kW, 380 to 480Vac, 0…320Hz, IP54 (T) €13,157 Phone: +353 1 45 75 421 Email: [email protected] 33 Specialists in BeMS Measurement & Control www.intelcontrols.com Frequency Converters NXL series Variable motor speed drives suitable for a wide range of voltage and current loads. Convert fixed frequency and voltage from the mains supply to variable frequency and voltage enabling motors to be used with maximum efficiency resulting in significant energy savings. The drive has a built-in PID control application that can be adjusted from the control keypad. NXL drives are suitable for mounting in a small space, using back, side, or DIN rail mounting. The drives are easily programmed and commissioned by using the control keypad or PC tools software. Part # Description Price Part # Description Price NXL00015 Variable Speed Drives, 0.55kW, 380 to 480Vac, 0…320Hz, IP54 €273 NXLAA12C5 Variable Speed Drives, 5.5kW, 380 to 480Vac, 0…320Hz, IP54 €816 NXL00025 Variable Speed Drives, 0.75kW, 380 to 480Vac, 0…320Hz, IP54 €289 NXLAA16C5 Variable Speed Drives, 7.5kW, 380 to 480Vac, 0…320Hz, IP54 €973 NXLAA03C5 Variable Speed Drives, 1.1kW, 380 to 480Vac, 0…320Hz, IP54 €536 NXLAA23C5 Variable Speed Drives, 11kW, 380 to 480Vac, 0…320Hz, IP54 €1,190 NXLAA04C5 Variable Speed Drives, 1.5kW, 380 to 480Vac, 0…320Hz, IP54 €565 NXLAA31C5 Variable Speed Drives, 15kW, 380 to 480Vac, 0…320Hz, IP54 €1,440 NXLAA05C5 Variable Speed Drives, 2.2kW, 380 to 480Vac, 0…320Hz, IP54 €595 NXLAA38C5 Variable Speed Drives, 18.5kW, 380 to 480Vac, 0…320Hz, IP54 €1,680 NXLAA07C5 Variable Speed Drives, 3kW, 380 to 480Vac, 0…320Hz, IP54 €660 NXLAA45C5 Variable Speed Drives, 22kW, 380 to 480Vac, 0…320Hz, IP54 €1,899 NXLAA09C5 Variable Speed Drives, 4kW, 380 to 480Vac, 0…320Hz, IP54 €719 NXLAA61C5 Variable Speed Drives, 30kW, 380 to 480Vac, 0…320Hz, IP54 €2,396 Price Part # Description Price ACC/VSD2H/GRAP VSD2H replacement advanced HIC DISPLAY commissioning keypad (T) €109 ACC/VSD2H/HAND Kit to produce hand held keypad unit; HELD KIT includes 2 m cable (T) ACC/VSD2H/TEXT VSD2H replacement text keypad (T) DISPLAY €64 NXNI Variable speed drive network interface, for NX and VSD series (T) €198 €72 NXIP NXIP Trend Ethernet Interface card (T) €308 NXOPTB5 Additional I/O board (T) €91 Accessories Accessories for VSD and NXL series variable speed drives Part # ACC/VSD2H/USBPC/CABLE Description VSD2H to PC (USB port) 3 m cable (to connect to PC running VSD2H software tools) (T) ACC/VSD2H/DOOR Kit to mount keypad unit on door; includes 2 MOUNTING KIT m cable (T) €89 Phone: +353 1 45 75 421 Email: [email protected] €103 34 Specialists in BEMS Measurement & Control www.intelcontrols.com Value Tables NTC10K3A1 ( 10k a 25°C) Temp °C KΩ -50 667.8 -40 335.7 -30 176.7 -20 96.97 -10 55.3 NTC10K (10k a 25°c) Temp °C KΩ -50 329.5 -40 188.5 -30 111.3 -20 67.77 -10 42.47 0 1 2 3 4 5 6 7 8 9 32.65 31.03 29.5 28.05 26.69 25.39 24.17 23.02 21.92 20.88 0 1 2 3 4 5 6 7 8 9 27.28 26.13 25.03 23.99 23 22.05 21.16 20.3 19.49 18.7 10 11 12 13 14 15 16 17 18 19 19.9 18.97 18.09 17.26 16.46 15.71 15 14.32 13.62 13.05 10 11 12 13 14 15 16 17 18 19 17.96 17.24 16.56 15.8 15.28 14.69 14.12 13.58 13.06 12.56 20 21 22 23 24 25 26 27 28 29 12.49 11.94 11.42 10.92 10.45 10 9.57 9.16 8.77 8.4 20 21 22 23 24 25 26 27 28 29 12.08 11.63 11.2 10.78 10.38 10 9.63 9.28 8.94 8.62 30 35 40 45 50 60 70 80 90 8.06 6.53 5.33 4.37 3.6 2.49 1.75 1.26 0.92 30 35 40 45 50 60 70 80 90 8.31 6.94 5.82 4.91 4.16 3.02 2.22 1.66 1.26 100 110 120 130 140 150 0.68 0.51 0.39 0.3 0.23 0.18 100 110 0.97 0.75 PT100 (Class B IEC 751) PT1000 (Class B IEC 751) Temp °C Ω Temp °C Ω -200 18.49 -200 184.93 -190 22.8 -190 228.03 -180 27.08 -180 270.78 -170 31.32 -170 313.2 -160 35.53 -160 355.31 -150 39.71 -150 397.14 -140 43.87 -140 438.69 -130 48 -130 479.99 -120 52.11 -120 521.06 -110 56.19 -110 561.9 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 60.25 64.3 68.33 72.33 76.33 80.31 84.27 88.22 92.16 96.09 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 602.54 642.99 683.25 723.35 763.28 803.07 842.71 882.22 921.6 960.86 -5 -4 -3 -2 -1 0 1 2 3 4 5 98.04 98.44 98.83 99.22 99.61 100 100.39 100.78 101.17 101.56 101.95 -5 -4 -3 -2 -1 0 1 2 3 4 5 980.45 984.36 988.27 992.18 996.09 1000 1003.91 1007.81 1011.72 1015.62 1019.53 10 20 30 40 50 60 70 80 90 103.9 107.79 111.67 115.54 119.4 123.24 127.07 130.89 134.7 10 20 30 40 50 60 70 80 90 1039.02 1077.93 1116.72 1155.39 1193.95 1232.39 1270.72 1308.93 1347.02 100 110 120 130 140 150 160 170 180 190 200 138.5 142.29 146.06 149.82 153.58 157.31 161.04 164.76 168.46 172.16 175.84 100 110 120 130 140 150 160 170 180 190 200 1385 1422.86 1460.61 1498.24 1535.75 1573.15 1610.43 1647.6 1684.65 1721.58 1758.4 400 600 247.04 313.59 400 600 2470.38 3135.94 Phone: +353 1 45 75 241 Email: [email protected] NTC10K2 Temp °C Ω -40 337200.0 -30 177200.0 -20 97130.0 -10 55340 -5 -4 -3 -2 -1 0 1 2 3 4 5 42340.0 40170.0 38120.0 36200.0 34380.0 32660.0 31040.0 29510.0 28060.0 26690.0 25400.0 6 7 8 9 10 11 12 13 14 15 16 17 18 19 24180.0 23020.0 21920.0 20890.0 19900.0 18970.0 18090.0 17260.0 16470.0 15710.0 15000.0 14320.0 13680.0 13070.0 20 21 22 23 24 25 26 27 28 29 12490.0 11940.0 11420.0 10920.0 10450.0 10000.0 9572.0 9165.0 8777.0 8408.0 30 35 40 45 50 60 70 80 90 8056.0 6531.0 5326.0 4368.0 3602.0 2489.0 1753.0 1258.0 917.4 100 110 120 679.8 511.0 389.4 Specialists in BeMS Measurement & Control www.intelcontrols.com Product updates from Trend Controls The IQ422 Controller is now available to order ‘Trend's smallest ever 6UI/6AO controller’ The IQ422 series of intelligent controllers is designed for localised intelligent control of distributed plant. The complement of 6 universal inputs and 6 analogue voltage outputs make the product ideally suited to small-medium sized applications as well as advanced unitary control. Full compatibility with the Trend IQ system enables the IQ422 to integrate the local environmental needs with the main building energy management system, optimising both comfort and running costs. Key Benefits: Reduced panel size Trend’s smallest ever physical footprint for a 6UI/6AO controller. With its small footprint and vertical connector block extraction the IQ422 is ideally suited to confined space applications. Reduced installation time The IQ422 has soft configurable inputs and addressing with automatic baud rate selection and IQTool compatibility. This greatly reduces engineering and commissioning time thereby reducing the cost of install. Superior IT integration The IQ422 has an open system support and integration option that allows integration with IT infrastructure. A new style web interface facilitates the use of mobile devices, such as smartphones and tablets. Cost effective means of controlling a variety of applications with fully programmable 6UI/6AO the IQ422 can provide intelligent control of a wide variety of plant. Perfect for small to mid-sized applications with the power to support advanced control applications including remote web supervision with graphical representation and control adjustments. Key Features: Ethernet 10/100 Mbps main network with TCP/IP protocol Trend current loop LAN option BACnet over IP option Small footprint with DIN rail mounting RS232 and USB local supervisor ports Soft addressing using Barcode technology 3 vCNC connections Embedded XML Web Services as standard Product Obsolescence Notice Please be advised that the below products have been withdrawn from sale. Order Code TONN/DRIVER/Andover_AC256/SER TONN/DRIVER/Andover_Infin_Cont/SER IQ3XACT/12/BAC/100-240 IQ3XACT/12/BAC/24 IQ3XACT/12/100-240 IQ3XACT/12/24 IQ3XACT/12/LAN/100-240 IQ3XACT/12/LAN/24 IQ3XACT/12/LAN/BAC/100-240 IQ3XACT/12/LAN/BAC/24 Product Description Andover AC256 serial driver Andover Infinity/Continuum serial driver IQ3 Xact 12 point controller BACnet 230v IQ3 Xact 12 point controller BACnet 24v IQ3 Xact 12 point controller 230v IQ3 Xact 12 point controller 24v IQ3 Xact 12 point controller LAN 230v IQ3 Xact 12 point controller LAN 24v IQ3 Xact 12 point controller LAN & BACnet 230v IQ3 Xact 12 point controller LAN & BACnet 24v For more information please do not hesitate to contact us. Phone: +353 1 45 75 241 Email: [email protected] Specialists in BeMS Measurement & Control www.intelcontrols.com New Supplier Open System Solution (OSS) is one of the fastest growing brands in the building control and automation industry in the UK and across the global market. The company was established in 2006 and to date has continued to deliver innovation and sustainable solutions to clients globally. Products Expansion Modules Multi Protocol Controller Integration Phone: +353 1 45 75 421 E-mail: [email protected] User Interface Specialists in BeMS Measurement & Control www.intelcontrols.com Intelligent Building Controls Ltd. Unit 10 Oak Road Business Park, Nangor Road, Dublin 12 Ph: 01 45 75421 Fax: 01 45 75 420 Application for Account and/or Credit Request Company Name: Trading Name: Address: Company Reg. No: VAT Reg. No: Date of Incorporation: Telephone No.: Purchasing Contact: Fax Number: Accounts Payable Contact: Email: Company Directors Details Name: Name: Address: Address: Other Directorships: Other Directorships: Credit Limit required: Credit Terms: 30 days only Trade References: Name: Phone No.: Fax No.: Name: Phone No.: Fax No.: In making this application, I/We acknowledge and accept the conditions of business contained in this document (Pages 2 & 3) which govern this contract. Authorized Signature: Position: Print Name: Date: IBC Use: Account Manager allocated: Date: IBC Use: Terms Approval (Director Only): Date: Phone: +353 1 45 75 241 Email: [email protected] Specialists in BeMS Measurement & Control www.intelcontrols.com 1 Terms & Conditions of Business 1.1 Definition in these conditions: The “Customer” shall mean the corporate entity firm or person seeking to purchase the Goods from the Company; The “Company” shall mean Intelligent Building Controls Limited (IBC); The “Contract” shall mean any contract of Goods or Services made between the Company and the Customer; The “Goods” shall mean the products articles or things to be sold by the Company; The headings to the clauses shall not affect the construction of these conditions; The use of plural shall include the singular and the use of the singular shall include the plural; 1.2 These conditions shall be incorporated into each and every Contract made between the Company and the Customer 1.3 These conditions shall apply to the exclusion of any terms or conditions put forward by or on behalf of the customer and in the event of any conflict or inconsistency between these terms and conditions of trading and the terms of your order , these terms and conditions prevail, unless otherwise agreed by the Company in writing. 1.4 These conditions shall not create any agency or partnership between the Company and the Customer or any third party 1.5 No person in the employment or acting otherwise as agent of the Company or purporting so to do has authority to accept orders or supply goods in any condition other than those contained herein or to vary these conditions in any way whatsoever. Previous dealings between the Company and the Customer shall not vary or replace these conditions or be deemed in any circumstances whatsoever so to do. 1.6 No purported variation or waiver of or addition to these conditions, whether written or oral or in respect of representations or statements made, shall have effect unless and until authorized in writing by a manager of the Company. 1.7 Quotations, whether written or oral, submitted by the Company shall be deemed to be an invitation to treat and not an offer. 2 2.1 2.2 2.3 2.4 2.5 3 3.1 3.2 3.3 3.4 3.7 3.8 4 4.1 4.2 5 5.1 5.2 5.3 5.4 5.5 5.6 6 6.1 6.2 6.3 6.4 Acceptance Any quotation issued by the Company shall be open for acceptance at any time during the validity period shown on the quotation. If unstated the validity period is 30 days. After the expiration of the validity period the quotation is deemed to have been withdrawn by the Company. Any quotation is made on the understanding that it will be accepted in full. In the event of partial acceptance of the quotation by the Customer a written revised quotation may be sent by the Company to the Customer. Any description or specification or drawing or particulars accompanying the quotations or contained in the Company‟s marketing material shall not form part of the Contract. It is the Customer responsibility to check quotation and order documentation to ensure it is correct and notify the Company of any discrepancies in writing immediately. Additions or alterations to orders, however made, shall not be binding until confirmed by the Company in writing. The Company reserved the right to change products, specifications or prices without prior notice. Prices The Company reserves the right to change/alter the unit price. The quoted price is valid for 30 days from date of issue. All prices quoted are net and subject to VAT at the rate ruling at the date of dispatch. If the Customer requires alteration to the order, the price will be varied accordingly and the Company shall be entitled to recover any ancillary costs incurred. Cash discount (by negotiation) is offered for payment with order and/or prior to delivery. Minimum order value is seventy five Euro (€75.00). Damages, property, risk & theft The risk in goods supplied by the Company shall pass to the Customer where the Company delivers goods or the Customer collects Goods. The legal and beneficial ownership of those goods remains with the Company until payment is received in full. Delivery The cost of delivery is included in the quotation unless otherwise stated. Goods lead-in times may vary from product to product, and may be outside the control of the Company. The Company will not accept any liability for any delays caused by delivery of goods. However, the Company will endeavor to inform the customer of any unexpected delays. Any alterations on the order by the customer may delay the completion and delivery of the order. The customer must examine the goods and notify the company of any defects or shortages within 3 days of delivery. If the Customer is not available or prepared to accept delivery the company may leave the goods on the premises without responsibility for loss or damage to the Company. Payment Where credit facilities have been arranged all monies are due for payment within the agreed number of days from month end. Failure to strictly comply with credit terms will result in normal trading being suspended, with account being designated „On Stop‟ and all further orders put on a payment with order basis. Amounts outstanding beyond agreed credit terms will attract interest at the rate of 1.5% per month or part thereof and will be effective from date of invoice(s). If no specific credit terms have been agreed then the customer shall pay all sums due to the company either with order or upon delivery. We accept payment via MasterCard, Visa and Laser. There is a handling charge of €5 applied to each transaction. Phone: +353 1 45 75 241 Email: [email protected] Specialists in BeMS Measurement & Control www.intelcontrols.com 7 Guarantee & Warrantee 7.1 All goods supplied are in accordance with and limited to manufacturers terms and conditions EXCEPT in the case of ZIP Heaters (UK) Ltd where warranty is in respect of parts only and this guarantee or warranty is limited to such warranty or guarantee as is given by the makers thereof. Such warranties and guarantees are set out in manufacturers and company websites, brochures, catalogues and in quotations. The company‟s liability under clause 7.1 above is conditional upon: a)Notice in writing being given to the company immediately the defect or failure arises; b) Goods have been installed in proper and satisfactory manner c) Goods having been maintained & serviced in a proper and satisfactory manner with documentary evidence; d) Goods having been used reasonably for the purposes for which they were supplied and not having been damaged by other parties or otherwise or modified in any way; e) The customer having complied in all respect with all terms and conditions of these conditions of sale. If alterations/modifications are made to the goods without the prior written consent of the company, the company shall be under no liability for failure of the goods. No allowance shall be made for any alterations so made. All defective parts replaced shall become the property of the company. If agreed payment terms are not complied with then any guarantee or warranty issued by the Company is void. 7.2 7.3 7.4 7.5 8 8.1 8.2 8.3 Limitations of liability Except where expressly contained in these conditions of sale, all warranties, conditions, undertakings and representations, express or implied, statutory or otherwise, are excluded and the company has no obligation, duty or liability in contract, tort (including negligence or breach of statutory duty) or otherwise. In any event, the company‟s liability arising for any reason in connection with this contract shall be limited to the original invoice value of goods. In no circumstances will be the company be liable in contract, tort (including negligence or breach of statutory duty) or otherwise for loss (whether direct or indirect) of profits, business or anticipated savings, or for any direct or 8.4 Each provision of this condition is to be constructed as a separate limitation applying and surviving even if for any reason one or other of the said provisions is held unreasonable in any circumstances and shall remain in force notwithstanding termination of this contract. 9 9.1 9.2 Cancellation and Returns The company will not accept cancellation of orders for goods specified uniquely to customer‟s requirements. In the event that a purchase has been placed and acknowledged and the order is cancelled anytime prior to dispatch, a cancellation fee of 25% is payable. Orders shall not be cancelled or amended unless so agreed in writing and upon terms which provide indemnity against any loss incurred by the company as a result of cancellation. Return of goods, with prior agreement in writing, will be subject to a re-stocking fee of 20%. 9.3 9.4 10 Changes to terms and conditions 10.1 The company reserves the right to change these conditions of sale at any time. Any changes being made will be notified in writing to the customer in advance of said changes taking effect. 11 Notices 11.1 Any notice required to be given in writing under the contract shall be given either by facsimile transmission or by first class post and shall be deemed to have been delivered (in the absence of evidence to the Contrary) within 3 days of posting. 12 Title 12.1 The Customer expressly agrees, that until the Company has been paid in full for the goods comprised in this or any other contract between the parties hereto the following conditions shall apply: a) Risk in the Goods shall pass on delivery but the goods shall remain the Company‟s property. b) The Company reserves the right to dispose of the goods until payment in full for all of the goods has been received by the Company in accordance with the terms of this contract or until such time as the Customer sells the goods to its customers by way of bona fide sale at full market price. c) If Payment due to the Company under this Agreement is overdue in whole or in part the Company may (without prejudice to any of the Company‟s other rights) recover or re-sell the goods or any part of them and may enter upon the Customer‟s premises personally or through the Company‟s servants or agents for that purpose. d) Until such time as the property in the goods passes to the Customer, the Customer shall be entitled to resell or use the goods in the ordinary course of its business. The Customer shall hold the proceeds of sale (and/or the proceeds of any insurance where appropriate) of any goods upon trust for the Company as to the proportion thereof representing the price and shall account to the Company for same. The Customer shall hold all such monies in a separate bank account pending payment to the Company and shall at all times keep these monies separate from any monies or property of the Customer or third parties. e) Until the property and the goods has passed from the Company to the Customer shall ensure that the goods and any products in which they are incorporated are kept in good condition and repair and shall keep such goods and products insured against all risks to their full replacement cost. f) In case of default in payment the Company shall be granted access rights in order to repossess the Goods. 13 Governing law 13.1 This contract shall be governed by laws of the Republic of Ireland. Phone: +353 1 45 75 241 Email: [email protected] Specialists in BEMS Measurement & Control www.intelcontrols.com Trend only supports products sold in Ireland through IBC/Trend authorised sources. Are you buying your authorised source? from an IBC/Trend Authorised Partners: IBC is the sole supplier of Trend in Ireland Phone: +353 1 45 75 241 Email: [email protected] Intelligent Building Controls Ltd, Unit 10 Oak Road Business Park, Nangor Road, Dublin 12, Ireland. T: +353 1 45 75 421 F: +353 1 45 75 420 E: [email protected] W: www.intelcontrols.com