PVGA-M1600L-R11

Transcription

PVGA-M1600L-R11

Single board computer
PVGA-M1600L-R11
Long term support high performance
graphic card
Long Term Support
1
Application
Server
Platform
3
2
2
1
Single
Board
Computer
8C M
4
ly
On
1. DVI
2. VGA
HYPERMEMORY™ 2
3. LVDS
4. HDTV
3
IBX Series
POS PC
4
PVGA-M1600L
Real time Thermal Testing
AFOLUX
POS
Panel PC
Ring Bus Memory Controller
• 256-bit internal ring bus for memory reads
• Programmable intelligent arbitration logic
• Fully associative texture, color, and Z/stencil cache
designs
• Hierarchical Z-buffer with Early Z test
• Lossless Z Compression (up to 48:1)
• Fast Z-Buffer Clear
• Z/stencil cache optimized for real-time shadow
rendering
HDTV Component Cable
HDTV output with Component, S-Video, Cable support
MacroVision / Overscaling, 480P /720P / 1080i and NTSC / PAL support
5
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
8
VITO
Universal
Controller
Application
9
Features
DINO
BLADE
1. LOW Power : ATI 1600 mobile (M56 ) graphic chip
2. Low Profile : 8 CM low profile
3. DVI / VGA / LVDS output option
4. PCIe x 16 high performance graphic card
5. Next Generation 3D Engine for Performance and Micro soft vista
Leadership
6. Multi-threaded core
7. Performance-enhanced Shader engine
Mini ITX-KINO
Micro ATX-IMB
ATX-IMBA
10
PICMG 1.3
11
Packing List
Specifications
Embedded
System
1 x PVGA-M1600L Graphic card
1 x Mini jumper pack
Graphic Engine
ATI Mobility X1600
Max Resolution
2048x1536
Video Memory
256MB GDDR3
LVDS
Dual-channel 24 bit
LVDS
1 x DVI to VGA adapter ( P/N: 33Z00-000031-RS)
Engine Clock
500MHz
HDTV Out
PAL/NTSC upto 1080i
1 x S-Video, RCA Cable ( P/N: 32000-084200-RS)
Memory Clock
550MHz
VGA Out
Standard 15-pin D-sub
RAMDAC
400MHz
DVI Output
DVI-I Single/Dual
- Link
Bus Standard
PCI Express x 16
2nd VGA Output
Yes, via DVI-VGA
adaptor
Cable bundle
S-Video, component
cable
1 x VGA D-SUB cable ( P/N: 32200-075000-RS)
1 x Component Cable
( P/N: 32000-083700-RS)
1 x QIG (quick installation guide)
Memory Interface
128-bit
LCD
Product
Series
12
Industrial
Computer
Chassis
13
Power
Supply
1 x Utility CD
Ordering Information
Part No.
Description
PVGA-M1600L-R11
LOW PROFILE DVI,VGA,LVDS,AND HDTV FUNCTION
GRAPHIC CARD
14
Peripherals
P V G A - M 1 6 0 0 L - V 1 0 2-145
LCD LVDS Module
PM-MPCI
LVDS-01-RS-R90
Single Channel LVDS Module
1
Supports 18-bit TFT LCD
Compatible to TIA/EIA-644 LVDS standard
Long distance drive capability
20-pin Hirose DF14A-20P-1.25H connector
Application
Server
Platform
Front side
2
LVDS Receiver Module
2.0 pitch 44-pin or 0.5 pitch 50-pin FFC connector for 18 / 24pin TTL LCD panel
Connecting to IEI series SBC 20/30-pin LVDS LCD connector
On board inverter power supply connector
3
IBX Series
POS PC
4
FP24-01A-RS-R20
LCD Connection Module
AFOLUX
POS
Panel PC
2.0 pitch 44-pin connector for 18/24-bit LCD panel
Connecting to ICP series SBC 50-pin LCD connectot
5
Video
Capture
Card
7
1. PC/104 plus form factor with RoHS compliance
2. Supports dual Mini PCI devices
3. Flexible PCI routing setting
Specifications
Mini PCI slot
Dual 124-pin female socket
Data Bus
32-bit data bus compliant with PCI bus
PCI interface
3.3V or 5V interface
PCI routing
By jumper setting
Expansion
PC/104 plus ( PCI + ISA bus ) for PM-MPCI-PLUS
PCI-104 ( PCI bus ) for PM-MPCI
Temperature
Operation: 0ºC ~ 60ºC ( 32ºF ~ 140ºF)
Humidity
Operation: 5% ~95%non-condensing
Dimension
96 mm x 90 mm
Weight
GW:120g, NW:70g
Packing List
KAMIO
RISC
Solder side
Features
LCD-24-R10
LVDS Receiver Module
Single
Board
Computer
6
PCI-104 to Mini PCI Bus Module
1 x PM-MPCI Single Board Computer
Part No.
Description
LVDS-01-RS-R90
18-bit 44Pin TTL to 18-bit 20Pin LVDS Connector Module
LCD-24-R10
18-bit 20Pin LVDS to 44Pin or 50Pin TTL Connector Module
FP24-01A-RS-R20
50Pin TTL to 44Pin TTL Connector Module
1 x QIG
Part No.
PM-MPCI-PLUS-R10
PM-MPCI-R10
Description
PCI-104 to Mini-PCI interface with PC/104 plus
connector
PCI-104 to Mini-PCI interface without PC/104 connector
IOVU
Open HMI
8
VITO
Universal
Controller
SATA/IDE/CF Type II Carry Board
SATA/IDE/CF converter board
SATA to IDE
Device Bridge
9
DINO
BLADE
10
LCD
Product
Series
5V input
SATA
Connector
44-pin IDE
LDE
Indicators
CF Type II
11
CF-KIT04-R10
Embedded
System
12
Industrial
Computer
Chassis
13
Power
Supply
IDE/ CF Type II Carry Board
IDE to CFII Carry board with master/slave mode selection
SAIDE-KIT01-R10
Features
SATA/IDE/CF converter board
1. CF Type II Socket with Master / Slave mode selection
2. 4-pin power connector
3. Power/ HDD signal LED
Features
1. CF Type II Socket
2. 44-pin IDE connector (Master mode)
3. 4-pin 5V input connector
4. Power/5V/HDD LED indicator
32100-064401-RS
IEI CF Solution
IEI CF Solution
14
Peripherals
iCF1000I
2-146 L V D S - 0 1 - R S - V 1 0
iCF1000W
iCF1000 Industrial
standard grade
iCF1000 Wide
Temp. grade
PCIe 16X SDVO interface VGA/ DVI graphic card
IEI only for Intel 915/945/Q965 dual display solution by PCIE 16X interface SDVO add on card.
1
Application
Server
Platform
2
SDVO-100DVI-R10
Single
Board
Computer
3
IBX Series
POS PC
4
SDVO-100VGA-R10
AFOLUX
POS
Panel PC
The most cost effective dual display solution for
IEI boards with customized BIOS.
Part No.
Description
SDVO-100DVI-R10
DVI output , PCIe x16 add-on card by SDVO interface
SDVO-100VGA-R10
VGA output , PCIe x16, add-on card by SDVO interface
32100-154400-RS
SDVO I²C bus wire cable (Connector pitch 2.0mm to 2.0mm) (SBC to PE & PXE series backplane only)
32100-154401-RS
SDVO I²C bus wire cable (Connector pitch 2.54mm to 2.0mm)(SBC to PE & PXE series backplane only)
5
Video
Capture
Card
6
KAMIO
RISC
IEI SDVO Cards Support List
PCIMG 1.3 Board
Model
PCIE-Q350 / PCIE-9650 / PCIE-9450 / PCIE-9452 / PCIE-9152
Embedded Board
Model
IMBA-X9654 / IMBA-9654 / IMBA-9454 / IMBA-9454ISA / IMB-Q354 / IMB-9454 / IMB-9452 / IMB-9154 / KINO-9454
7
IOVU
Open HMI
IEI Mini PCI
Model
KINO-9455
32000-105000-RS
KINO-9454
Mini-ITX
KINO-9453
9
A200
5.25''
NOVA-8522
3.5”
WAFER-CX700M
Other
DINO
BLADE
MPSATA-01
PM-MPCI
Wireless LAN Communication Protocol Comparison
802.11a
802.11b
Raw Data Rate
Up to 54 Mbps
Up to 54 Mbps
Achievable
Throughput
20 Mbps ~ 30 Mbps
4 Mbps ~ 6 Mbps
Asssociate Rate
Steps Down to
54 Mbps, 48 Mbps36 Mbps, 24 Mbps18 Mbps, 12 Mbps 9 Mbps, 6
Mbps
11 Mbps, 5.5 Mbps2 Mbps, 1 Mbps
Range
75 feet @ 36Mbps
100 feet @ 11Mbps
Spectrum Range
U-NII and ISM 5-6 GHz range
ISM 2.4-2.4835 GHz range
Advantages
High data rate
Widespread product availablity
Higher spectral efficiency means more data can be transmitted over a
smaller amount of bandwidth
Low Cost
32100-143900-RS
11
Embedded
System
P/N:32500-000500-RS
More expensive components
Lower data rate
Higher power consumption
Interference with other 2.4GHz devices such as
microwave ovens and 2.4GHz cordless phones
12
Industrial
Computer
Chassis
13
P/N:32500-001000-RS
Relative immunity to interference
10
LCD
Product
Series
Resistance to multi-path or reflected signals
Disadvantage
VITO
Universal
Controller
KINO-9452
KINO-9451
PPC-5350GS
8
Power
Supply
14
Peripherals
Fewer available channels for frequency reuse
S D V O - V 1 0 2-147
Mini-PCI Realtek/ VIA/ Ralink Wireless LAN Module
The IEI Networking wireless Mini-PCI cards00 are fully complaint with IEEE‘s security and 802.11b/g or 802.11 a/b/g standards. With data rates between wireless devices of up to
54Mbps, it can deliver the bandwidth necessary for real-time streaming for many applications. Supports Windows®, Linux and CE Operating Systems.
Tri-Band
1
Application
Server
Platform
2
Single
Board
Computer
3
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
WMR-01
WMV-01
WMRA-01
Mini-PCI Realtek Wireless LAN Module
Mini-PCI VIA Wireless LAN Module
Mini-PCI Ralink Wireless LAN Module
Model Name
WMV-01
WMR-01
WMRA-01
Standards
IEEE 802.11 b/g IEEE 802.11 b/g IEEE 802.11 a/b/g
Interface
Mini-PCI
Mini-PCI interface 1.0
Mini-PCI Interface 1.0
Controller Chip
VIA VT6655
Realtek RTL8165L
Ralink RT2561ST
Connectors
2 x U.FL (I-PEX) Antenna connectors
2 x Diversity U.FL Compaible Coaxial Connector
Diversity Coaxial Connector
Security
Supports WPA and WPA 2.0; Built-in hardware
security engine for 802.11i 4.0. WEP (128-bit, 64-bit),
TKIP, AES CCMP
Hardware-Based Encryption/Decryption Using 64-, 128-bit
Wired-Equivalent Privacy (WEP) Keys, WPA and WPA2 are
also supported
Hardware-Based Encryption/Decryption Using WEP 64/128,
WPA, WPA2, 802.1 and 802.11i
Frequency Range
2.4 ~ 2.497 GHz (for US, Canada, Europe, Japan)
2.412 GHz ~ 2.484 GHz (for US, Canada, Europe, Japan)
2.412 GHz ~ 2.4835 GHz
5.15 GHz ~ 5.724 GHz
5.725 GHz ~ 5.825 GHz
Modulation Type
QPSK, BPSK, CCK, OFDM
PBCC, CCK, DQPSK, DBPSK
802.11b: CCK, DQPSK, DBPSK
802.11a/g: QAM64, QAM16, QPSK, BPSK
Supported OS
Windows® 98/NT/2000/XP
Windows® CE 4.2/5.0
Linux 2.4.x / 2.6.x
Windows® 98/NT/2000/XP
Windows® CE 4.2/5.0
Linux 2.4.x / 2.6.x
Windows® 98/ME/2000/XP
Windows® CE 5.0
Linux 2.4.x/2.6.x, MAC OSX
Receiver Sensitivity
802.11b ( 8% PER ) -84 dBm(max.) at 11Mpbs
802.11g ( 8% PER ) -71 dBm(max.) at 54Mpbs
802.11b ( in 8% PER ) -80 dBm(max.) at 11Mpbs
802.11g ( in 10% PER ) -70 dBm(max.) at 54Mpbs (-65dBm
in average)
802.11a: -65 dBm at 54Mpbs
802.11b: -80 dBm at 11Mpbs
802.11g: -65 dBm at 54Mpbs
Power Consumption
802.11b: 250 [email protected]
802.11g: 230 [email protected]
802.11a: 389 [email protected]
Temperature
Operating: 0 ~ 50ºC
Humidity
Operating: 0% ~70% non-condensing
Dimensions
64.7mm x 44.6mm
59.75 mm x 44.6 mm
59.6mm x 44.6mm
Weight
NW: 10 g
NW: 9.7 g
NW: 12 g
Complaint
Certifications
Wi-Fi, FCC
FCC, CE
FCC Part 15.247 in US
EN300328 and EN300826
(EN301489-17) in Europe
Features
DINO
BLADE
Standards
Interface
Controller Chip
Connectors
Security
Frequency Range
Embedded
System
12
Industrial
Computer
Chassis
13
Power
Supply
14
Peripherals
Supported OS
Receiver Sensitivity
Power Consumption
345 mA@ 3.3V Tx mode/High speed
320 mA@ 3.3V Rx mode/High speed
Temperature
Humidity
Dimension
Weight
Compliance Certifications
operation: 0 ~ +60ºC
operation: 10% ~90% non-condensing
50.95 mm x 30 mm
NW: 8 g
FCC, CE
1.
2.
3.
4.
5.
PCIe mini card form factor
High speed wireless connection to 54Mbps
Solid design with external antenna diversity
Low power consumption and high performance
Enhanced wireless security
IEEE 802.11 b/g , Wi-Fi compliant
IEEE 802.11 b/g USB 1.1/2.0 interface
VIA VT6656
Supports WEP, WPA 1.0/2.0
2.4 ~ 2.5GHz
802.11b : DQPSK, DBPSK, DSSS and CCK
802.11g : BPSK, QPSK, 16QAM, 64QAM, OFDM"
Windows® 98SE/ME/2000/XP
802.11b ( 8% PER ) -83 dBm(Typical) at 11Mpbs
802.11g ( 10% PER ) -68 dBm(Typical) at 54Mpbs
Modulation Type
11
Features
1. IEEE 802.11b DSSS / IEEE 802.11g OFDM high
rate compatible
2. PCIe mini card form factor
3. Supports RF On/Off mechanism
4. Supports an external or internal LED indicator
5. WEA/WAP support
9
LCD
Product
Series
PCIe mini card wireless LAN module
PCIe mini card VIA wireless LAN module
VITO
Universal
Controller
10
WMPCIE-V01-R10
WMUSB-V10-R10
8
PCIe mini card
Atheros
WEP 64-bit and 128-bit encryption, WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access)
2.4GHz ISM Bands 2.412-2.472GHz, 2.484GHz
802.11b : CCK, DQPSK, PSK
802.11g : OFDM
Windows® 2003 server/ XP/XP64/Vista 32/Vista 64
802.11b: -76 dBm(Typical) at 11Mpbs
802.11g: -68 dBm(Typical) at 54Mpbs
802.11b: TX : MAX 710 mA@ 3.3V , MIN 630mA at 3.3V
RX : MAX 330 mA@ 3.3V , MIN 310mA at 3.3V
802.11g: TX : MAX 650 mA@ 3.3V , MIN 620mA at 3.3V
RX : MAX 340 mA@ 3.3V , MIN 320mA at 3.3V
operation: 0 ~ +60ºC
operation: 15% ~95% non-condensing
51 mm x 30 mm
NW: 18 g
FCC, CE
Part No.
Description
Part No.
Description
WMR-01-R10
802.11 b+g Wireless Mini-PCI module with Realtek RTL8185L
32500-000500-RS
2 dBi 109mm Antenna
WMV-01-R10
802.11 b+g Wireless Mini-PCI module with VIA VT6655
32500-001000-RS
5 dBi 173mm Antenna
WMRA-01-R10
802.11 a+b+g Wireless Mini-PCI module with Ralink RT2561ST
32100-143900-RS
RF CABLE ;300MM;28AWG;(A)SMA CONNECTOR ;(B)MHF20278-11R13;ROHS
32000-105000-RS
USB cable, 2x4-pin 2.54mm to JST SHR-06V 1.0mm, L:20cm
WMPCIE-V01-R10 802.11 b+g PCIe mini card wireless LAN module with Atheros
WMUSB-V01-R10
2-148
802.11 b+g USB embedded module with VIA VT6656
WM-WiFi-V10
IEI Trusted Platform Module (TPM) Solution
Hardware base security solution for data protection and reliable authentication via TPM that stores key,
passwords and digital certificates.
H/W Features Comparison
Solution
INFINEON
SLB9635 TT1.2
1
Pin Assignment
WINBOND
WPCT200
Application
Server
Platform
20
1
Features
Secure Startup
Root of Trust Measurement
of early boot devices
Anti H/W Attack
Sensors and active shield
-
TSS API support
MS-CAPI / PKCS#11, #12
MS-CAPI
H/W Certification
Management Tool
Function
Pin
Singnal
Pin
Singnal
1
LCLK
2
VSS
3
LFRAME#
4
KEYWAY
5
LRST#
6
VCC5
7
LAD3#
8
LAD2#
9
VCC3
10
LAD1#
11
LAD0#
12
VSS
13
SCL
14
SDA
15
SPDA1
16
SPDA0
17
VSS
18
SERIRQ
19
RC#
20
A20GATE
1. TPM Management
2. File&Folder En/Decryption
3. Personal Secure Drive
4. Secure E-Mail
5. Key Transferring
6. Security Policy
Configuration
What is EAL?
* EAL (Evaluation Assurance Level,EAL1 through EAL7)
is a numerical grade assigned following the completion of
a Common Criteria security evaluation, an international
standard. To achieve a particular EAL, It must meet specific
assurance requirements.
1. TPM Owner Management
2. Password Management
3. Fingerprint Biometrics
Support
4. Secure Login
5. TPM Key Backup
Market Segment
Complete TPM1.2 Function
TCG Specification
TCG 1.2 Compliance Trusted Platform Module
Interface
Low Pin Count
Software Structure
TCG Software Stack 1.2 Complaint
Easy, Simple TPM Solution
2
Single
Board
Computer
3
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Video
Capture
Card
6
KAMIO
RISC
TPM OS Supported List
7
OS Supported
Infineon
Winbond
Windows®
Windowx XP SP2
Winsow XP SP2
Cryptographic Accelerator HAS-1/ RSA algorithm
Linux
IEI SBC solution with TPM support list
Model Name
Form Factor
Chipset
SPCIE-3600AM2
PICMG 1.3
NVIDA MCP55Pro
PCIE-Q350
PICMG 1.3
Intel Q35 + ICH9DO
PCIE-9652
PICMG 1.3
Intel GME965 + ICH8M-E
PCIE-9152
PICMG 1.3
Intel 915GM + ICH6
PCIE-690AM2
PICMG 1.3
PCIE-690S1
PICMG 1.3
WSB-Q354
PICMG 1.0
Intel Q35 + ICH9DO
WSB-9452
PICMG 1.0
Intel 945GM + ICH7M
IMBA-X9654
ATX
IMBA-9654
ATX
IMBA-9454/9454ISA
ATX
Intel 945G+ ICH7
IMB-Q354
MicroATX
Intel Q35 + ICH9DO
IMB-9454
MicroATX
Intel 945G+ ICH7
IMB-9452
MicroATX
Intel 945GM + ICH7M
KINO-9652
Mini-ITX
Intel G M965 + ICH8M
KINO-9454
Mini-ITX
Intel 945G+ ICH7
KINO-690AM2
Mini-ITX
KINO-690S1
Mini-ITX
Fedora 6(Kemel 2.6.8 or Fedora 6(Kemel 2.6.8 or
above)
above)
8
VITO
Universal
Controller
9
TPM Type
DINO
BLADE
10
AMD 690G + SB600
Intel Q965 + ICH8DO
IOVU
Open HMI
LCD
Product
Series
INFINEON
WINBOND
11
Embedded
System
12
Industrial
Computer
Chassis
AMD 690G + SB600
13
Power
Supply
Model Name
Description
TPM-IN01-R10
INFINEON 20 pin Trusted Platform Module with S/W Management Tool
TPM-WI01-R10
WINBOND 20 pin Trusted Platform Module with S/W Management Tool
14
Peripherals
T P M - V 1 0 2-149
Multiport Serial Communication Card
• Introduction
1
Application
Server
Platform
2
Single
Board
Computer
3
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
● IEI provides multiport the serial communication cards to enhance the serial communication functions of your system. A variety of interfaces are provided in
the IEI multiport serial communication card, such as PCI, PCI-104, or PC/104 interface, for easy integration into your existing system.
● Most IEI multiport serial communication cards come in a low profile version or high protection version. The high protection version is designed with higher
ESD and isolated protections for harsh environments, and the low profile version is a cost-effective solution and provides general protections.
● The new IEI multiport serial communication hardware design provides shared IRQ support, higher data transmission speed up to 921.6 Kbps, and larger
FIFO buffer (256 bytes) for transmitter and receiver of each channel. The IEI multiport serial communication card software comprises of diversified OS
drivers and testing utilities.
Main Feature :
• Diversified hardware interface support
• 256 byte FIFO per channel (default : 128 byte for transmitter and 128 byte for receiver)
• On board 15 KV ESD and isolated protection (high protection version)
• Data transmission speeds up to 921.6 Kbps
• Support shared IRQ
• Drivers support Windows® 2000, Windows® XP, Windows® XPe and Linux
• Application
5
Video
Capture
Card
6
KAMIO
RISC
7
PCI
IOVU
Open HMI
8
PCI-104(PC/104-plus)
VITO
Universal
Controller
PC/104
9
DINO
BLADE
10
LCD
Product
Series
11
• Selection Guide
Embedded
System
12
Industrial
Computer
Chassis
13
Power
Supply
14
Peripherals
Model Name
PMS-400L
PMS-400
PMS-800
PMS-1200
PM-2004
PM-2008
PM-1004
PM-1028-4
PM-1028-8
Bus
PCI
PCI
PCI
PCI
PCI-104
PCI-104
PC / 104
PC / 104
PC / 104
Ports
Communication
Interfaces
Protection
4
4
8
12
4
8
4
4
8
RS-232
ν
ν
ν
ν
ν
ν
ν
ν
ν
RS-422
ν
ν
ν
ν
ν
ν
ν
-
-
RS-485
ν
ν
ν
ν
ν
ν
ν
-
-
ESD
±15 KV
±15 KV
±15 KV
±15 KV
±15 KV
±15 KV
-
-
-
3000 VDC
3000 VDC
3000 VDC
1000 VDC
1000 VDC
-
-
-
Isolation
Driver support
2-150 P M S - V 1 0
Windows® 2000, Windows® XP, Windows® XPe and Linux
Windows® 2000, Windows® XP,
Windows® XPe and Linux
Windows® NT, Windows® 2000, Windows® XP,
Windows® CE and Linux
Multiport Serial Communication PCI Card
Multiport Serial Communication PCI Card
4-port, 8-port or 12-port isolated RS-232/422/485 serial communications PCI card
1
Application
Server
Platform
2
PMS-400L
PMS-400
PMS-800
PMS-1200
Low-profile 4-port non-isolated RS232/422/485 serial communications PCI
card
High-protection 4-port isolated RS232/422/485 serial communications PCI card
Features
1. PCI v2.1 interface
2. mPCI954+16C954 UART Controller
3. Support shared IRQ
4. Individual jumper selections for RS-232/422/485
5. Data transmission speeds up to 921.6 Kbps
6. 128-byte deep FIFO per transmitter and receiver
7. On-board 15 KV ESD protection
8. Isolated 3000 Vdc DC protection
9. Powerful and easy-to use utility
10.WindowsR 2000, WindowsR XP, WindowsR XPe and Linux driver support
+
4 x DB-9 connector cable
P/N ( 32000-088800 )
Specifications
Model Name
PMS-400-R10
PMS-800-R10
PMS-1200-R10
Bus Interface
PCI ver. 2.1 interface
I/O controller
mPCI954+16C954 UART Controller
Number of Ports
4-port (PMS-400-R10) / (PMS-400L-R10)
8-port (PMS-800-R10)
12-port (PMS-1200-R10)
Data Bits
5,6,7,8
Stop Bits
1, 1.5, 2
Partity
None, Even, Odd
Speed
50 bps ~ 921.6 kbps
Connectors
4, 8 or 12 male DB-9 connectors
ESD protect
(Human Body Mode)
±15 KV
Isolation Protection
3000 Vdc
Driver Support
Windows® 2000, Windows® XP, Windows® XPe and
Linux
Temperature
Operating: -5ºC ~ 65ºC ( 23ºF ~ 149ºF)
Humidity
Operating: 5% ~95 non-condensing
Dimension
122 mm x 185 mm
PMS-400L-R10
PMS-800-R10
PMS-1200-R10
4
AFOLUX
POS
Panel PC
5
Connector
Video
Capture
Card
6
TX+
KAMIO
RISC
Share IRQ Benefit :
Reserve more resources for system
devices.
Easy to programm each COM port.
Reduce system integration time.
7
IOVU
Open HMI
8
9
DINO
BLADE
10
80 mm x125 mm
PMS-400-R10
RS-422 RS-485
RXDataRX+
Data+
TX-
Every DB-37 female flat cable
with connector cable can
support four RS-232/422/485
N/A
Packing List
PMS-400L-R10
RS-232
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
RI
IBX Series
POS PC
VITO
Universal
Controller
1 x 4-port, 8-port or 12-port RS-232/422/485 serial communications PCI card
1 x COM port cable with 4xDB-9 connector (P/N: 32000-088800) for PMS-400-R10,
PMS400L-R10
2 x COM port cable with 4xDB-9 connector (P/N: 32000-088800) for PMS-800-R10
1 x Flat cable (P/N: 32200-076000) for PMS-800-R10
3 x COM port cable with 4xDB-9 connector (P/N: 32000-088800) for PMS-1200-R10
2 x Flat cable (P/N: 32200-076000) for PMS-1200-R10
1 x Mini Jumper Pack
1 x Utility CD
1 x QIG
Part No.
Pin Definition
1
2
3
4
5
6
7
8
9
3
=
DB-37 female flat cable
P/N ( 32000-076000 )
Single
Board
Computer
Description
Low-profile 4-port non-isolated RS-232/422/485 serial communications
PCI card
High-protection 4-port isolated RS-232/422/485 serial communications
PCI card
PCI card
PCI card
LCD
Product
Series
FIFO is the default queuing algorithm in some instances, thus requiring
no configuration. FIFO queuing makes no decision about packet priority;
the order of arrival determines bandwidth, promptness, and buffer
allocation. FIFO queuing was a necessary first step in controlling data
traffic.
11
Embedded
System
12
ESD / Isolated protection
Industrial
Computer
Chassis
IEI Provides :
1. On-board 15 KV ESD protection
2. Isolated 3000 Vdc protection
An integrated circuit (IC) connected to external
ports is susceptible to damaging electrostatic
discharge (ESD) pulses from the operating
environment and peripherals. Additional
protection can violate stringent signaling
requirements, leaving design engineers with the
need to balance performance and reliability.
P M S - V 1 0 2-151
13
Power
Supply
14
Peripherals
Multiport Serial Communication PCI-104 Module
PM-2004
4-port isolated RS-232/422/485 serial
communications PCI-104 module
1
PM-2008
8-port isolated RS-232/422/485
serial communications PCI-104 module
4 x DB9 connector
Application
Server
Platform
2
Single
Board
Computer
3
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
8
VITO
Universal
Controller
Flat Cable
Features
Features
1. PCI-104 form factor
2. RoHS compliant
4. 4-port isolated RS-232/422/485
5. Support shared IRQ
6. PCI Revision 2.1 compliant
7. Isolated protection
Specifications
Bus Interface
Number of Ports
Data Bits
Stop Bits
Partity
Speed ( bps )
Connectors
Max Speed (bps)
ESD Protect (Human Body Mode)
IEC-1000-4-2 Contact Discharge
IEC-1000-4-2 Air Discharge
Isolated Protection (Vrms)
Singals
Power consumption
Temperature Operating
Humidity Operating
Dimensions
Driver Support
Dimensions
1. PCI-104 form factor
2. RoHS compliant
4. 8 port Isolated RS-232/422/485
5. Support Shared IRQ
7. Isolated protection
Specifications
PCI-104
4-port
5,6,7,8
1, 1.5, 2
None, Even, Odd
50 ~ 921.6 K
1 x COM port cable with 4xDB9 connector
RS232
RS485
RS422
250K
4M
4M
±15KV
±15KV
±15KV
±8KV
±8KV
±8KV
±15KV
±8KV
±8KV
2500
2500
2500
Full Function
2/4 Wired
4 Wired
5V @450mA
-5~65°C (23~149°F)
5% ~95 non-condensing
96 mm x 90 mm
Windows® 2000/XP/XPe and Linux
( Unit : mm )
Bus Interface
Number of Ports
Data Bits
Stop Bits
Partity
Speed ( bps )
Connectors
Max Speed (bps)
ESD Protect (Human Body Mode)
IEC-1000-4-2 Contact Discharge
IEC-1000-4-2 Air Discharge
Isolated Protection (Vrms)
Singals
Power consumption
Humidity Operating
Dimensions
Driver Support
Dimensions
PCI-104
8-port
5,6,7,8
1, 1.5, 2
None, Even, Odd
50 ~ 921.6 K
2 x COM port cable with 4xDB9 connector
RS232
RS485
RS422
250K
4M
4M
±15KV
±15KV
±15KV
±8KV
±8KV
±8KV
±15KV
±8KV
±8KV
2500
2500
2500
Full Function
2/4 Wired
4 Wired
5V @450mA
-5~65°C (23~149°F)
5% ~95 non-condensing
96 mm x 90 mm
Windows® 2000/XP/XPe and Linux
( Unit : mm )
9
DINO
BLADE
10
LCD
Product
Series
11
Embedded
System
12
Industrial
Computer
Chassis
13
Power
Supply
14
Peripherals
Packing List
Packing List
1 x PCI-104 4-Port Isolated RS-232/422/485 Module
1 x PCI-104 8-Port Isolated RS-232/422/485 Module
1 x COM port cable with 4xDB9 connector (P/N: 32000-088800)
2 x COM port cable with 4xDB9 connector (P/N: 32000-088800)
1 x Flat Cable (P/N: 32200-076000)
2 x Flat Cable (P/N: 32200-076000)
1 x Utility CD
1 x Utility CD
1 x QIG
1 x QIG
Part No.
Description
Part No.
Description
PM-2004-R10
4-port isolated RS-232/422/485 serial communications PCI104 module
PM-2008-R10
8-port isolated RS-232/422/485 serial communications PCI104 module
2-152 P M - C O M - V 1 0
Multiport Serial Communication PCI-104 Module
PM-1004
4-port non-isolated RS-232/422/485
serial communications PC/104 module
PM-1028
4-port or 8-port non-isolated RS-232
serial communications PC/104 module
1
Application
Server
Platform
2
P/N: 32200-026800-RS
P/N: 32200-025400-RS
Shipped with 4-port RS-422/485
connection cable
Features
3
Features
1. PC/104 form factor
2. RoHS compliant
3. 16C554 UART controller
4. Four jumper selectable RS-232 or RS-422/485 serial communication ports
5. Supports shared IRQ or independent IRQ mode
6. Jumper selectable interrupt level
7. MAX. baud rate: 921.6kb/s
8. Windows® NT, Windows® 2000, Windows® XP, Windows® CE and Linux driver
support
Specifications
Number of Ports
Interrupt Level
PC/104
Model Name
4-port
Bus Interface
3, 4, 5, 7, 9, 10, 11, 12
Chipset
TI 16C554A
Baud Rate
921.6 Kbps (max.) at 14.745 MHz clock input
Serial ports
16C550-compatible UART
Connectors
One 4-port RS-232 connection cable (40-pin; 2.54 box header)
One 4-port RS-232 connection cables
( 40-pin; 2.54 box header)
Power consumption
+5 V @ 0.6 A (max)
0ºC ~ 60ºC
Dimensions
95.89 mm x 90.17 mm
Windows® NT, Windows® 2000, Windows® XP, Windows® CE
and Linux
Dimensions
1. PC/104 form factor
2. RoHS compliant
3. 16C554 UART controller
4. Supports shared IRQ or independent IRQ mode
5. Jumper selectable interrupt level
6. COM port base I/O addressing setting
7. MAX. baud rate: 921.6kb/s
8. Interrupt vector addressing setting
9. Windows® NT, Windows® 2000, Windows® XP, Windows® CE and Linux driver support
Specifications
Bus Interface
Driver support O.S.
Shipped with 4-port RS-232
connection cable
( Unit : mm )
PM1028-4
PM1028-8
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Video
Capture
Card
PC/104
Number of Ports
4-port
Interrupt Level
8-port
3, 4, 5, 7, 9, 10, 11, 12
Chipset
TI 16C554A
Baud Rate
up to 921.6K bps (at 14.745Mhz clock input)
Serial ports
16C550-compatible UARTs
Connectors
One 4-port RS-232 connection cable (40-pin; 2.54 box header)
Two 4-port RS-232 connection cables ( 40-pin; 2.54 box header)
Power consumption
+5 V @ 0.6 A (max)
0ºC ~ 60ºC
Dimensions
Driver support O.S.
Single
Board
Computer
95.89 mm x 90.17 mm
Windows® NT, Windows® 2000, Windows® XP, Windows® CE
and Linux driver support
Dimensions
( Unit : mm )
6
KAMIO
RISC
7
IOVU
Open HMI
8
VITO
Universal
Controller
9
DINO
BLADE
10
LCD
Product
Series
11
Embedded
System
12
Packing List
Packing List
1 x 4-port non-isolated RS-232/422/485 serial communications PC/104 module
1 x 4-port RS-422/485 connection cable (P/N: 32200-026800-RS)
1 x Utility CD
1 x RS-232 Cable (P/N: 32200-025400-RS)
1 x 4-port or 8-port non-isolated RS-232/422/485 serial communications PC/104 module
Industrial
Computer
Chassis
1 x 4-port RS-232 connection cable for PM-1028-4-R20 (P/N: 32200-025400-RS)
2 x 4-port RS-232 connection cables for PM-1028-8-R20 (P/N: 32200-025400-RS)
Part No.
Part No.
Description
PM-1028-4-R20
PM-1004-R20
4-port non-isolated RS-232/422/485 serial communications
PC/104 module
PM-1028-8-R20
13
Power
Supply
1 x Utility CD
Description
PC/104 module
PC/104 module
P M - 1 0 0 4 - V 1 0 2-153
14
Peripherals
CAN Communication Card
• Introduction
1
Application
Server
Platform
The Control Area Network (CAN) is a serial bus system, originally developed by Bosch for use in automobiles, and now is increasingly being used in
industrial automation. IEI CAN communication cards offer the connectivity of the Control Area Network (CAN) to your system. With built-in CAN controllers,
the IEI CANprovides bus arbitration and error detection with an automatic transmission repeat function. This drastically reduces the chance of data loss and
ensures system reliability. and are suitable for networking intelligent I/O devices such as sensors or actuators of machines or plants. and on-board optical
isolators along with additional protection design protect your system and equipment against damage from ground loops and electrostatic discharge (ESD)
pulses, which increase system reliability in harsh environments.
2
Single
Board
Computer
3
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
• Application
IEI provides PCI, PCI-104, and PC/104 CAN communication cards for integrating into IEI single board computers, IEI workstations, and IEI embedded
systems which support, PCI-104, or PC/104 interface.
5
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
8
PCI
PCI-104
Ethernet
CAN Cards
Industrial
Motherboard or
SBC
CAN bus
Workstations
or Embedded
System
• Software Support
• Software Developement Kits (SDK)
- Driver Application Programming
Interfaces (APIs)
- Diagnostics and Testing Utility
- Demo application software with
source code
VITO
Universal
Controller
9
DINO
BLADE
• OS support
Windows® XP, Windows®
XPe or Windows® CE 5.0
10
SDK
LCD
Product
Series
11
RS-485
PC/104
• Selection Guide
Embedded
System
12
Industrial
Computer
Chassis
13
Power
Supply
14
Model Name
Bus
CAN Communication
Interfaces
Digital Input
Digital Ouput
Analog Input
Peripherals
Ports
Isolated Protection
Input Channel
Isolated Protection
Ouput Channel
Isolated Protection
Input Channel
Resolution
IPCI-1680
PCI
2
3000 Vdc
-
Voltage Input
-
Current Input
-
Direct Sensor Input
-
Driver Support
2-154 I P C I - V 1 0
PM-1680
PCI-104
2
3000 Vdc
-
PM-3001
PC/104
2
3000 Vdc
8 x Isolated DI
2000 Vdc
8 x Isolated DO
2000 Vdc
-
PM-3004
PC/104
2
3000 Vdc
8 x Isolated DI
2000 Vdc
8 x Isolated DO
2000 Vdc
2 x AI ( Thermocouple )
16-bit
±15 mV, ±50 mV, ±100 mV, ±500 mV
±1 V, ±2.5 V
±20 mA
J : 0 ~ 760°C , K : 0 ~ 1370°C
T : -100 ~ 400°C , E : 0 ~ 1000°C
Windows® 2000, Windows® XP, Windows® XPe and Windows® CE 5.0
CAN Communication Card & Module
IPCI-1680-CBM
2-port isolated protection CAN communication bus PCI
card
PM-1680-CBM
2-port isolated protection CAN communication bus
PCI-104 module
2008
NEW
1
Application
Server
Platform
2
Single
Board
Computer
Features
2. RoHS compiant
3. Two independent CAN bus communication ports.
4. Compatible with CAN Specifications 2.0
5. On-board optical isolation protection.
6. Programmable transfer rate up to 1 Mbps.
7. Jumper settings for dual ports select 120 Ω terminator resistor.
Specifications
Bus Interface
PCI Revision 2.2 compliant
Number of Ports
Two
CAN controller
Philips SJA1000T
CAN transceiver
Philips PCA82C251
Signal Support:
CAN_H, CAN_L
Speed ( bps )
1 Mbps
Connectors
DB-9 male on bracket or dual 2 x 5
pin internal 2.54 pitch box header
Dimensions
3
Features
1. Interface PCI-104 Module
2. Two independent CAN bus communication ports.
3. Compatible with CAN Specifications 2.0
4. On-board optical isolation protection.
5. Programmable transfer rate up to 1 Mbps.
6. Jumper settings for dual ports select 120 Ω terminator resistor.
Specifications
Isolated Protection
3000 Vdc
Power consumption
5 V @ 400 mA
Temperature: Operating:
-5ºC~ 65ºC ( 23ºF~ 149ºF)
Humidity
Operating: 5% ~95%
Non-condensing
Drive Support
Windows® XP / Windows® XP
Embedded / Windows® CE 5.0
( Unit : mm )
Bus Interface
PCI-104
Number of Ports
Two
CAN controller
Philips SJA1000T
CAN transceiver
Philips PCA82C251
Signal Support
CAN_H, CAN_L
Speed ( bps )
1 Mbps
Connectors
Port #1 output is connected to two
9pin d-sub connectors, one is male
and the other is female.
Dimensions
Port #2 output is connected to
one 2x5 header.
Isolated Protection
3000 Vdc
Power consumption
5 V @ 400 mA
Temperature: Operating:
-5ºC~ 65ºC ( 23ºF~ 149ºF)
Humidity
Operating: 5% ~95%
Non-condensing
Drive Support
Windows® XP / Windows® XP
Embedded / Windows® CE 5.0
( Unit : mm )
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
8
VITO
Universal
Controller
9
DINO
BLADE
10
LCD
Product
Series
11
Embedded
System
12
Packing List
Industrial
Computer
Chassis
Packing List
1 x IPCI-1680-CBM CAN Bus PCI Card
1 x PM-1680-CBM CAN Bus PCI-104 Module
1 x Utility CD
1 x Utility CD
1 x QIG
1 x QIG
Part No.
IPCI-1680-CBM-R10
Description
2-port isolated protection CAN communication bus PCI card
13
Power
Supply
Part No.
Description
PM-1680-CBM-R10
2-port isolated protection CAN communication bus PCI-104
module
14
Peripherals
I P C I - 1 6 8 0 - C B M - V 1 0 2-155
PM 3000 Series PC/104 Industrial Communication & I/O Module
1
Application
Server
Platform
2
Single
Board
Computer
3
• Introduction
● The IEI PM I/0 module series enables you to turn your single board computer (SBC) into a PC-based data acquisition and control system. Data acquisition
and control systems generally perform one or more input and output functions such as analog input, analog output, digital input, digital output, counter/timer,
and industrial field bus communication. IEI PM series I/O modules have the following features:
• Analog Inputs
• Digital Inputs and Outputs
• Counter/Timer
• CAN bus communication
● These days the PC-based data acquisition and control system products like industrial SBC
and I/O modules have become increasingly reliable, accurate, and affordable. PC-based
data acquisition and control systems are now widely used in industrial and laboratory
applications such as monitoring, control, data acquisition and automated testing.
Power Control
Factory
Transportation
Assembly Line
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
DA&C Device
5
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
Building Automation
Central Administration
Office Automation
• IEI PM Series Solution
● IEI PM industrial I/O solutions provide both I/O boards and corresponding
off-the-shelf best-fit single board computers (SBC), embedded chassis, and
embedded systems. The following guide is provided to help you to build up your
data acquisition system:
+
=
Step 1 : Decide the type of I/O
• PM-3001 : 2 x CAN, 8 x DI, 8 x DO
• PM-3002 : 16 x DI, 16 x DO, including 4 x 16-bit counter and 1 x Max. 100KHz timer
• PM-3003 : 2 x AI, 8 x DI, 8 x DO
• PM-3004 : 2 x CAN, 8 x DI, 8 x DO, 2 x AI
8
VITO
Universal
Controller
Step 2 : Hardware Platform selection
9
• IEI KAMIO Series RISC-based SBC
DINO
BLADE
AT mode
Battery-backup
RTC
10
LCD
Product
Series
Audio
PC/104
LVDS LCD I/F
TTL LCD I/F
12
Industrial
Computer
Chassis
8 x Digital Intput
Isolated
RS-232/422/485
Reset Button
LCD Inverter I/F
11
Embedded
System
8 x Digital Output
USB Client
ATX mode
9~36V DC-IN RS-232/422/485
KAMIO-CB03
SDIO I/F
VGA
LAN 2 & LAN 1
2 x USB Host 2.0
CIM I/F
• IEI Series SBC
IEI series SBC support PC/104 Expansion Slot
13
Power
Supply
SBC
14
Peripherals
Model Name
2-156
PM series PC/104 SBC
3.5" WAER SBC
EPIC NANO series SBC
5.25" NOVA series SBC
Step 3 : Embedded Chassis selection
• IEI EBC-1000G embedded chassis for Wafer series SBC
Step 4 : Software Support
• Embedded OS and Drivers : Supports Windows® XP embedded or Windows® CE 5.0.
• SDK : Software Development Kits (SDK) for Windows® XP, Windows® XPe and Windows® CE 5.0 application software programming, and demo source code is
provided.
• Diagnostic Utility : Utility for testing I/O modules.
• Modbus Support : IEI provides Modbus Servers for PM Sereis I/O modules to turn your device into a Modbus device and thus can easily communicate and
integrate with any SCADA (Supervisory Control And Data Acquisition) software and system.
1
Application
Server
Platform
2
Single
Board
Computer
SDK
3
Modbus TCP/RTU
Protocol
IBX Series
POS PC
4
Modbus Servers
SCADA System with
Modbus Client support
AFOLUX
POS
Panel PC
• IEI provides optional VITO Series Universal Controller products which provide diversified CPU computing power, rich built-in industrial I/O functions, and rugged
embedded chassis design. Please refer to VITO Series for your data acquisition and control applications.
• IEI also provides OEM/ODM service to help customers to build their own DA&C system.
5
Video
Capture
Card
6
VITO-2100
VITO-2060
S
t
olu
ion
7
VITO-1000
VITO Universal Controller
IOVU
Open HMI
VITO-2070
Intelligent solution
VITO-2688
KAMIO
RISC
8
VITO
Universal
Controller
• Selection Guide
9
DINO
BLADE
Model Name
PM-3001
PM-3002
PM-3003
PM-3004
Bus
PC / 104
PC / 104
PC / 104
PC / 104
2
-
-
2
CAN Communication
Interfaces
Digital Input
Digital Ouput
Ports
Isolated Protection
3000 Vdc
-
-
3000 Vdc
Input Channels
8 x Isolated DI
16 x Isolated DI
8 x Isolated DI
8 x Isolated DI
Isolated Protection
2000 Vdc
2000 Vdc
2000 Vdc
2000 Vdc
Ouput Channels
8 x Isolated DO
16 x Isolated DO
8 x Isolated DO
8 x Isolated DO
Isolated Protection
2000 Vdc
2000 Vdc
2000 Vdc
2000 Vdc
Channels
-
4/4
-
-
Resolution
-
16-bit
-
-
Time Base
-
100 / 10 / 1 kHz , 100 Hz
-
-
Input Channels
-
-
Resolution
-
-
16-bit
16-bit
±15 mV
±50 mV
±100 mV
±500 mV
±1 V
±2.5 V
±15 mV
±50 mV
±100 mV
±500 mV
±1 V
±2.5 V
Counter / Timer (DI / DO)
Voltage Input
-
-
Current Input
-
-
±20 mA
±20 mA
-
J : 0 ~ 760°C
K : 0 ~ 1370°C
T : -100 ~ 400°C
E : 0 ~ 1000°C
J : 0 ~ 760°C
K : 0 ~ 1370°C
T : -100 ~ 400°C
E : 0 ~ 1000°C
Analog Input
Direct Sensor Input
Driver Support
-
V I T O - V 1 0 2-157
10
LCD
Product
Series
11
Embedded
System
12
Industrial
Computer
Chassis
13
Power
Supply
14
Peripherals
PC/104 Idustrial Communication & I/O Module
PM-3001
Industrial communication and digital I/O PC/104 module with two
isolated CAN ports, eight isolated digital input ports and eight isolated
digital output ports
1
Application
Server
Platform
4 x Isolated DI
4 x Isolated
DI
4 x Isolated DO
2008
NEW
Single
Board
Computer
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
8
VITO
Universal
Controller
9
8 x Isolated DI
8 x Isolated DI
8 x Isolated DO
8 x Isolated DO
2008
NEW
4 x Isolated DO
2
3
PM-3002
Industrial communication and digital I/O PC/104 module with
a 4-channel counter/timer,16 isolated digital input ports and 16 isolated
digital output ports
2 x Isolated CAN (two elects one by jumper )
Specifications
System Hardware
Bus
PC/104
Digital Input Signals
8-port isolated digital input
- 2000 VDC isolated protection
- 2000 VDC ESD protection
- 70 VDC over-voltage protection
- 0 VDC~ 50 VDC input range & 10 kHz speed
- Dry contact levels (0: GND, 1: Open)
- Wet contact levels (0: +2V Max, 1: +4V ~ +50V)
Digital Output Signals
8-port Isolated Digital Output
- 200 mA max/channel sink current
- 5 VDC~ 30 VDC output range and10 kHz speed
CAN Communication Interface
2-channel Isolated CAN
- Compatible with CAN specifications 2.0
- 3000VDC isolated by photo coupler for dual ports.
Power
Power Input: 5 VDC (2.5 W minimum)
Enviromental
Operating Temperature: 0ºC ~ 60ºC
Humidity: 5% ~ 85% RH without condensation
Driver Support
Dimensions
( Unit : mm )
Specifications
System Hardware
Bus PC/104
- 0 VDC ~ 50 VDC input range & 10 kHz speed
16-port isolated digital output
- 5 VDC ~ 30 VDC output range and 10 kHz speed
Counter / Timer
4x 16-bitl:
- Counter source: DI6 & DI7 , DI14&DI15
- Pulse output: DO6 & DO7 , DO14&DO15
Can be cascaded as one 64-bit counter/timer, Down counting, preset counting value,
interrupt handling, Timer
- time base: 100/10/1 kHz,100 Hz
Power
Power Input: 5 VDC (2.5 W minimum)
Enviromental
Humidity: 5 % ~ 85 % RH without condensation
Driver Support
Dimensions
( Unit : mm )
DINO
BLADE
10
LCD
Product
Series
11
Embedded
System
12
Industrial
Computer
Chassis
13
Power
Supply
Packing List
1x PM-3001
1x Utility CD including SDK,utilities, and technical documentations
1x Screw kit
14
Peripherals
Packing List
1x PM-3002
1x Screw kit
Part No.
Description
Part No.
Description
PM-3001-R10
PC/104 module with two isolated CAN, eight isolated DI and
eight isolated DO
PM-3002-R10
PC/104 module with a four channel counter/timer, 16
isolated DI and 16 isolated DO
2-158 P M - 3 0 0 1 - V 1 0
PC/104 Idustrial Communication & I/O Module
PM-3004
PM-3003
Industrial communication, digital I/O and analog input PC/104 module
with eight isolated digital input, eight isolated digital output and 2channel analog input
4 x Isolated DI
4 x Isolated DI
4 x Isolated DO
4 x Isolated DO
2008
NEW
Industrial communication, digital I/O and analog input PC/104 module
with two isolated CAN, eight isolated digital input, eight isolated digital
output and 2-channel analog input
4 x Isolated DI
4 x Isolated DI
4 x Isolated DO
4 x Isolated DO
2 x Isolated CAN
2x AI (two elects one by jumper )
Specifications
System Hardware
Bus PC/104
8-port Isolated Digital Input
- 0 VDC~ 50 VDC input range &10 kHz speed
- 5 VDC ~ 30 VDC output range and10 kHz speed
Analog Input Signals
2-ch Thermocouple Inputs
- JKTE type
- Input range: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA
- T/C types and temperature ranges : J : 0°C ~ 760°C, K : 0°C ~ 1370°C,
T : -100°C ~ 400°C, E : 0°C~ 1000°C Power
Power Input: 5 VDC (2.5 W min.)
Enviromental
Operating Temperature: 0 ~ 60ºC
Driver Support
Dimensions
( Unit : mm )
2008
NEW
2 x AI
Specifications
System Hardware
Bus
PC/104
8-port Isolated Digital Input
- 0 VDC ~ 50 VDC input range &10 kHz speed
- Wet contact levels (0:+2V Max, 1: +4V ~ +50V)
- 5 VDC~ 30 VDC output range and 10 kHz speed
Analog Input Signals
2-ch Thermocouple Inputs
- JKTE type
- Input range” ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA
- T/C types and temperature ranges : J : 0°C~ 760°C, K : 0°C~ 1370°C,
T : -100°C~ 400°C, E : 0°C~ 1000°C CAN Communication Interface
2-ch Isolated CAN
- Compatible with CAN specifications 2.0
- 3000 VDC isolated by photo coupler for dual ports.
Power
Power Input: 5 VDC (4.5 W min.)
Enviromental
Driver Support
Dimensions
( Unit : mm )
1
Application
Server
Platform
2
Single
Board
Computer
3
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
8
VITO
Universal
Controller
9
DINO
BLADE
10
LCD
Product
Series
11
Embedded
System
12
Industrial
Computer
Chassis
Packing List
1x PM-3003
1x Screw kit
Part No.
Description
PM-3003-R10
PC/104 module with eight isolated DI and eight isolated DO
and two channel AI
Packing List
13
1x PM-3004
Power
Supply
1x Screw kit
14
Part No.
Description
PM-3004-R10
PC/104 module with two isolated CAN , eight isolated DI
and eight isolated DO and two channel AI
Peripherals
P M - 3 0 0 3 - V 1 0 2-159
PM-3801
Industrial communication GSM/GPRS PC/104 module
with E-GSM 900/850 and GSM 1800/1900 radio section
1
Application
Server
Platform
2
Single
Board
Computer
2008
SIM card
connector
NEW
PC/104 I/F
GSM/GPRS
processor
3
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Video
Capture
Card
6
KAMIO
RISC
Dimensions
Specifications
( Unit : mm )
• Interface: PC/104
• 2-Watt E-GSM 900 / GSM 850 radio section
• 1-Watt GSM 1800/1900 radio section
• Chipset: WAVECOM Q24PL001
• Quad-Band GSM 850/900/1800/1900 MHz , GPRS Class 10
• Antenna: IPEX type
• Operating Voltage: 5 V
• Operating Temperature: -10°C~55°C
• Consumption current: < 2 A
• Supports KAMIO series carry boards and VITO / IOVU series
Packing List
1 x PM-3801
7
IOVU
Open HMI
8
VITO
Universal
Controller
1x Utility CD including SDK,utilities, and technical documents
1x Screw kit
Part No.
Description
PM-3801-R10
Industrial communication GSM/GPRS PC/104
module with E-GSM 900/850 and GSM 1800/1900
radio section
9
DINO
BLADE
CCD Camera
HVAC
10
LCD
Product
Series
PM-3801 GSM/GPRS module can be integrated IOVU series , VITO
series and other OEM/ODM products to enable easier access to the
Internet through a GSM network, allowing web browsing, corporate
and Internet email, vehicle positioning, remote LAN access, document
sharing and collaborative working.
VITO-2070
11
Embedded
System
Lighting
12
Industrial
Computer
Chassis
13
Power
Supply
Access
VITO-1000
Occupancy
GPS
Irrigation
Internet
GSM /
GPRS
Network
14
Peripherals
2-160 P M - 3 8 0 1 - V 1 0
SMS
RFID TAG Reader Device & Module
• Introductions to RFID
● Radio Frequency Identification (RFID) is one member in the family of Automatic Identification and Data Capture ( AIDC ) technologies and is a fast and
reliable means of identifying just about any material object. Primarily, the two main components involved in a Radio Frequency Identification system are the
Transponder (tags that are attached to the object) and the Interrogator (RFID reader). Communication between the RFID reader and tags occurs wirelessly and
generally does not require a line of sight between the devices.An RFID transponder, considered as a next generation barcode, is a miniscule microchip that
is attached to an antenna. They come in a wide variety of sizes, shapes, and forms and can be read through most materials with the exception of conductive
materials like water and metal, but with modifications and positioning even these can be overcome.An RFID reader typically contains a module (transmitter and
receiver), a control unit and a coupling element (antenna). The reader has three main functions: energizing, demodulating and decoding. In addition, readers
can be fitted with an additional interface that converts the radio waves returned from the RFID tag into a form that can then be passed on to another system, like
a computer or any programmable logic controller. Anti-Collision algorithms permit the simultaneous reading of large numbers of tagged objects, while ensuring
that each tag is read only once.
1
Application
Server
Platform
2
Single
Board
Computer
3
IBX Series
POS PC
Tag
Antenna
4
AFOLUX
POS
Panel PC
● Because RFID systems generate and radiate electromagnetic waves, they are justifiably classified as radio systems. The function of other radio services must
under no circumstances be disrupted or impaired by the operation of RFID systems. It is particularly important to ensure that RFID systems do not interfere
with nearby radio and television, mobile radio services (police, security services, industry), marine and aeronautical radio services and mobile telephones. The
need to exercise care with regard to other radio services significantly restricts the range of suitable operating frequencies available to an RFID system. For this
reason, it is usually only possible to use frequency ranges that have been reserved specifically for industrial, scientific or medical applications or for short range
devices. And currently widely used spectrums of common RFID systems are classified into three categories, Low Frequency (LF), High Frequency (HF), and
Ultra High Frequency (UHF).
5
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
8
VITO
Universal
Controller
9
DINO
BLADE
10
LCD
Product
Series
• IEI RFID Reader Solution
● IEI provides RFID reader solutions for High Frequency (HF) and Ultra High Frequency (UHF) RFID systems, and each reader
solution is compliant with corresponding industrial standards such as ISO-15693, ISO-14443, ISO-18000-3, ISO-18000-6, and
EPC. :
• HF RFID Reader Module
• HF RFID Reader Device
• Custom Service
IEI provides OEM/ODM services to enable your system with RFID Automatic
Identification and Data Capture ( AIDC ) technology.
VIDEO
HF/UHF RFID Data Collector
OEM/ODM
HF/UHF RFID reader
WiFi
GPRS
IRFR-100
POC-3174-FW-R10
11
Embedded
System
12
Industrial
Computer
Chassis
13
Power
Supply
14
IRFD-100
VITO-350 SERIES
Alarm
R F I D T A G R e a d e r D e v i c e & M o d u l e - V 1 0 2-161
Peripherals
RFID TAG Reader Device & Module
• Software Support
1
Application
Server
Platform
2
● Drivers Supports OS: Windows 2000, Windows XP, Windows XPe,Windows CE 5.0 and
Linux (based on project)
● An utility with GUI running on desktop/laptop for
- Configuring and testing ICP RFID reader module
- Reading/writing tags
- Demonstration with source code about how to use ICP RFID reader SDK
● SDK (Software Development Kits)
- Installed on development PC with DLL files
- Easy-to-use APIs (Application Programming Interfaces) to access ICP reader modules
- Command set to be released for serial communication to ICP reader modules
- Programming language support : (eMbedded) Visual C++, .NET (Compact) Framework
Single
Board
Computer
SDK
3
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Video
Capture
Card
6
KAMIO
RISC
• RFID Applications
● The profitable RFID applications in use today will continue to drive the market, and some of these are:
LIVESTOCK IDENTIFICATION
A tag is embedded under the animal's
skin; most commonly known use is
to identify household pets. RFID tags
help farmers to identify and track their
farm animals, also used in wildlife
conservation.
RAILWAY CAR AND CONTAINERS
Identifies and monitors railcars, primarily helps
to avoid accidents, but also provides sorting
capabilities.
ELECTRONIC TOLL COLLECTION
Identifies vehicles passing a toll
station and debits their account
automatically.
FUEL DISPENSING LOYALTY PROGRAMS
Customers pay for their fuel at the pump with
a wave of their key tag.
7
IOVU
Open HMI
8
VITO
Universal
Controller
9
AUTOMOBILE SECURITY
Tags are embedded into a key, a
reader in the vehicle ignition system
reads the unique code which then
allows the vehicle to start.
DINO
BLADE
10
LCD
Product
Series
11
Medical treatment controls
The RFID tag is labeled and encoded with
the patient's identification, health information,
and the details of the planned surgery. On the
day of surgery in the operating room, the tag
is scanned and the information is verified with
the patient's chart. RFID tags are also attached
to pharmaceutical packages for drug supply
information tracking from manufacturer to
pharmacy.
● Post 9/11 has seen increasing demand for security applications such as homeland security, employee identification, gaining entrance and controlling access
of vehicles to buildings, gated communities, corporate campuses and airports. Some other current uses include waste management, automating parking
and managing traffic, the dispensing of all types of products, providing ski lift access, the tracking of library books and more. Major growth in the future will
come from real-time location systems, asset management, baggage handling, and cash less payment systems. Business segments such as supply chain
management, logistics, warehousing and manufacturing will greatly benefit from the use of RFID technology.
Embedded
System
12
Industrial
Computer
Chassis
13
Power
Supply
14
Peripherals
2-162 R F I D T A G R e a d e r D e v i c e & M o d u l e - V 1 0
HF RFID TAG Reader Device & Module
13.56 MHz industrial RFID reader module
(IRFR) with support for ISO-15693
IRFR-100
2008
NEW
USB / RS232 Interface
Antenna
Buzzer
IRFD-100
2008
13.56 MHz industrial RFID reader device
(IRFD) with support for ISO-15693
NEW
1
Application
Server
Platform
IPEX type connect
J-TAK
2
Features
1. 13.56 MHz radio frequency Industrial RFID reading module
2. Supports standard protocol ISO-15693 for vicinity card applications reads multiple
tags simultaneously
3. Tag compatibility : TI , ST , Philips , Tag-it, HF-EPC
4. Reader to reader anti-collision
5. Reads and writes tags with up to 2Kb
6. Single power supply and low power consumption
7. Various interfaces to main system
• 115.2 Kbps maximum serial communication speeds
• USB
Specifications
Single
Board
Computer
Features
1. 13.56 MHz radio frequency Industrial RFID reading device
2. Support standard protocol ISO-15693 for vicinity card applications
reads multiple tags simultaneously
3. Tag compatibility : TI , ST , Philips , Tag-it, HF-EPC
4. Reader to reader anti-collision
5. Reads and writes tags with up to 2K bits
6. Single power supply and low power consumption
7. Various interfaces to main system
• Serial communication speed up to 115.2 Kbps
• USB
Specifications
System hardware
Support protocol
ISO15693
RF frequency
13.56 MHz
RF data rate
6.62 kbps for ISO-15693
Baud rate
9600 Kbps ~ 115,200 Kbps
Power consumption
5 V @ 150 mA
Operating distance
10 cm
Interface
RS-232 or USB
Operating temperature
0°C ~ 60°C
Operating humidity
10% ~ 85% RH
Tag compatibility
TI , ST, Philips , Tag-it , HF-EPC
Driver support
Windows XP, Windows XPe and
Windows CE 5.0
Dimensions (mm)
22
System hardware
Support protocol
ISO15693
RF frequency
13.56 MHz
RF data rate
6.62 kbps for ISO-15693
Baud rate
9600 Kbps ~ 115,200 Kbps
Power consumption
5 V @ 150 mA
Operating distance
10 cm
IBX Series
POS PC
4
AFOLUX
POS
Panel PC
5
Interface
RS-232 or USB
Operating temperature
0°C ~ 60°C
Operating humidity
10% ~ 85% RH
Tag compatibility
TI , ST, Philips , Tag-it , HF-EPC
Driver support
Windows XP, Windows XPe and
Windows CE 5.0
Video
Capture
Card
6
KAMIO
RISC
7
IOVU
Open HMI
8
Dimensions (mm)
VITO
Universal
Controller
55.5
21.34
11
3
9
12.7
10
49.91
50
42
21.21
4
DINO
BLADE
LCD
Product
Series
11
Embedded
System
Packing List
1 x IRFR-100
12
Packing List
Industrial
Computer
Chassis
1x IRFD-100
1 x Utility CD including SDK,utilities, and technical documents
1 x USB / RS-232 Y cable
1 x IPEX type antenna module
Part No.
Description
IRFR-100-R10
13.56 MHz industrial RFID reader module (IRFR) with
support for ISO-15693
1 x Utility CD including SDK,utilities, and technical documents
1 x USB / RS-232 Y cable
13
Power
Supply
14
Part No.
Description
IRFD-100-R10
13.56 MHz industrial RFID reader device (IRFD) with
support for ISO-15693
Peripherals
I R F R - 1 0 0 - V 1 0 2-163

PVGA-M1600L-R11

Transcription

Similar documents

full presentation - Med-e-Tel

( bahagian komputer pelayan ) / iiawii\tda binti kar

reading list 4th 2014.pptx

catalogue Factory

Attuatore per valvola a farfalla Electrak

WebRunner - Atlantis-Land

Dell Precision 7510 Quick Start Guide

19 Dossier di Registrazione

gianni biglia