crj-100/200 towbar manual

Transcription

CRJ-100/200 TOWBAR
Towbar Specifications, Usage, Preventive Maintenance, and Parts
MANUAL
(Includes Optional Hydraulic Lift and Soft Start)
For ordering New Towbars or Replacement Parts Please Contact: Towbar Parts @ 724‐752‐2000 Or Fax @ 724‐758‐1558 Or Email @ [email protected] Hall Industries, Inc. 514 Mecklem Lane Ellwood City, PA 16117 724‐752‐2000 Manufacturing Solutions Since 1966 August 5, 2013 Revision 01 Page 1 08‐05‐13 REV01 Update Manual 0. Index Section One Two Three Four Five Six Seven Description Specifications Operating Procedures Preventive Maintenance Replacement Part Kits / Assemblies Ordering Info How to find the part you need Attachment List Page 2 3 4 5 5 6 6 1. Specifications 1.1. Physical Specifications Part Number CRJ‐100 Description Full Assembly (25” Height x 35” Wide) With Fixed Wheel Carriage & Standard Eye Weight Length 210 lb 12’ 10” CRJ‐100‐HL‐SS Full Assembly (30” Height x 20” Wide) With Hydraulic Lift Wheel Carriage & Soft Start 235lb 12’ 10” CRJ‐100‐SS Full Assembly (30” Height x 20” Wide) With Fixed Wheel Carriage & Soft Start 225 lb 12’ 10” CRJ‐100‐HL Full Assembly (30” Height x 20” Wide) With Hydraulic Lift Wheel Carriage 225 lb 12’ 10” CRJ‐100‐5 Towbar Head 78 lb 35” 1.2. Warranty: All parts are guaranteed against defects for one year. If at any time this manual is not followed it will void the warranty (preventive maintenance logs are required for all warranty replacement parts). All replacement parts must be genuine Hall Industries parts. 1.3. Updates: Our manuals are updated periodically please check for updates on our website prior to ordering. Manufacturing Solutions Since 1966 Page 2 2. Operating Procedures NOTE: This must be done in accordance with the aircraft manual. 2.1. Inspect the Towbar (Prior to hooking up the towbar to the tug visually inspect): 2.1.1. Check for a bent or damaged frame and for worn or missing parts. 2.1.2. Check tires for damage. 2.1.3. Check that you have the proper towbar. NOTE: DO NOT attempt to tow any aircraft with a damaged or improper towbar. 2.2. Responsibility Operator of the tug must understand that it is his/her responsibility to move the aircraft safely the entire time that they are connected to the plane. NOTE: No speeding during push and pull. 2.3. Hooking Up to the Plane ~ Checks: 2.3.1. You are using the proper tug and towbar for the size aircraft being moved. 2.3.2. The towbar you are using is approximately level between the aircraft and the tug. 2.3.3.The eye end of the towbar must moves freely on the hitch mounted on the tug. 2.4. Attach the Towbar to the Aircraft 2.4.1. First check that the towbar head pins are in the open position. 2.4.2. Line up towbar to nose pin of aircraft and close nose pins. 2.4.3. Install lock pins. 2.5. Attach the Towbar to the Tow Tractor 2.5.1. Lift to the level of the push back’s hitch. 2.5.2. Position the push back tractor and install the hitch pin. 2.5.3. Tow or push the aircraft only if the tow bars tires are not touching the ground. 2.6. Push the Aircraft Manufacturing Solutions Since 1966 Page 3 NOTE: This must be done in accordance with the aircraft manual. Basic Rules: 2.6.1. Prior to moving, make sure that full swivel release pins are released (if applicable). Also double check that all the tie downs and chocks are removed and aircraft brakes are released. NOTE: This must be done in accordance with the aircraft manual. 2.6.2. Tow Slow, max speed is a brisk walk (Approximately 5 MPH). This will help to minimize the chance of a jack‐knife. 2.6.3. Do not exceed Aircraft nose wheel angle of towing limits. If not marked or not known, do not exceed 30° from center. Be extra cautious on snow and ice. 2.6.4. If you are driving make sure that you have plenty of help; “wing walkers” are helpful. 2.6.5. Make sure the operator / driver has direct contact with the pilot at all times while moving the aircraft. NOTE: Thousand of dollars in damage can occur in a few seconds while towing. It is estimated that 90% of towing damage is due to operator negligence / error. Accidents can be fatal. 2.7. Disconnect the Towbar from the Tug 2.8. Disconnect the Towbar from the Aircraft Remove lock pins and slide pins into the open position. Carefully lower the tow bar to the ground (use hydraulic lift if installed), and then move push back tractor and towbar clear of the aircraft. 3. Preventive Maintenance NOTE: Hall Industries recommends using this maintenance procedure monthly (or as required in your airlines maintenance procedure if sooner). Replace worn or damaged parts as needed. 3.1. Check the head retention pin and the soft start eye retaining bolts for wear. Manufacturing Solutions Since 1966 Page 4 3.2. Check wheels and wheel carriage for bent, broken, or worn parts and security. Lubricate pivot points using Hall lubricant (Part number TB‐LUBE). 3.3. Check head assembly for operation of latch mechanism; look for bending, security, etc. Lubricate pivot points using Hall lubricant (Part number TB‐LUBE). 3.4. Inspect jaw assembly for worn or damaged parts and security. 3.5. Check latch mechanism to ensure proper travel back and forth. Lubricate pivot points. 3.6. Check tow eye and hardware (tug attachment) for condition and security. 3.7. Check main body tube for bending or cracking. 3.8. Clean, repaint, or touch‐up paint as required. 3.9. Inspect tags and labels if damaged or missing replace (see the drawings in the attachment section for labels and placements). 3.10. If the towbar is equipped with a hydraulic lift, check the fluid reservoir (in the down / collapsed position). Add fluid if necessary (Part number TB‐LUBE‐L). 4. Replacement Parts, Kits, & Assemblies Part Number 4.1. CRJ‐100‐11‐2‐KIT QTY (in Kit) Description SHEAR PIN KIT 4.1.1. CRJ‐100‐11‐2 2 Shear Pin 4.1.2. HRJ‐145‐11‐2A 2 Locknut 4.1.3. CRJ‐7‐1‐E 1 Head Bushing 4.1.4. CRJ‐700‐‐11‐3 2 Adapter Bushing 5. Ordering Info 5.1. Accepted Payments Include (but not limited to): 5.1.1. Visa 5.1.2. MasterCard 5.1.3. American Express 5.1.4. Company Check Wire Transfer Manufacturing Solutions Since 1966 Page 5 5.2. Standard terms ~ NET 30 with approved credit 5.3. Minimum Orders ~ $50 5.4. The Order Form is listed in the attachments of this document. 6. How to find the part you need 6.1. What pushbar do I need? 6.1.1. Soft Start Eyelet or Standard Eyelet (user preference) 6.2. What wheel carriage do I need? 6.2.1. Fixed or Hydraulic lift (user preference) 7. Attachment List 7.1. CRJ‐100 CRJ‐100 & 200 Towbar Complete 7.2. CRJ‐100‐5 CRJ‐100 & 200 Towbar Head Complete 7.3. HRJ‐145‐12‐1‐TE‐SS Towbar Tube with Soft Start Toweye Assembly 7.4. TB‐SS3.5‐D8Q Repairable Soft Start Assembly 7.5. HRJ‐145‐12‐1‐TE Towbar Tube with Standard Toweye Assembly 7.6. CRJ‐400 Fixed Wheel Carriage 7.7. REG‐LIFT Regional Towbar Lift ~ Hydraulic 3 ½” 7.8. HRJ‐145‐12‐2ASY Handle Assembly 7.9. AV1009‐0002 Drag Plate 3.5” Bolted 7.10.
Soft Start Brochure 7.11.
Order Form 7.12.
Other Products and Custom Design Services Manufacturing Solutions Since 1966 Page 6 REVISIONS
REV
0
1
2
DESCRIPTION
ORIGINAL
WHEEL CARRIAGE LOCATION
UPDATE DRAWING
DATE
3/27/2002
2/28/2003
7/30/2013
BY
CJS
CJS
BJE
CHK
‐
‐
DC
NOTES:
1.
2.
7
34 8 " FOR MORE INFORMATION SEE SUB‐ASSEMBLY DRAWINGS. TAGS MUST BE INSTALLED.
3
17 4 " 1
2
3
ITEM
1
2
3
4
4
QTY
1
1
1
1
PART NUMBER
CRJ‐100‐5 HRJ‐145‐12‐1‐TE
CRJ‐400
HRJ‐145‐12‐2ASY
DESCRIPTION
HEAD AND ADAPTER COMPLETE
TOWBAR TUBE AND EYE
FIXED WHEEL CARRIAGE
HANDLE ASSEMBLY
3
12'‐9 16 " 1
16 4 " 29" WHEELSET PLACEMENT
HANDLE PLACEMENT
5
24 8 " CRJ‐100 & 200
CONFIGURATIONS WITH FIXED WHEELSET W/ HYDRAULIC WHEELSET
STANDARD EYELET CRJ‐100
SOFT START EYELET CRJ‐100‐SS
CRJ‐100‐HL
CRJ‐100‐HL‐SS
© 2013 HALL INDUSTRIES, INC. ALL RIGHTS RESERVED.
HALL INDUSTRIES, INC. PROPRIETARY RIGHTS ARE INCLUDED IN THE INFORMATION DISCLOSED HEREIN. RECIPIENT, BY ACCEPTING THIS DOCUMENT, AGREES THAT
NEITHER THIS DOCUMENT NOR THE INFORMATION DISCLOSED HEREIN NOR ANY PART THEREOF SHALL BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR
USED OR DISCLOSED TO OTHERS FOR MANUFACTURING OR FOR ANY OTHER PURPOSE EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY HALL INDUSTRIES, INC.
SOLIDWORKS
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
TOLERANCES ANGLE .XX .XXX ± 0.5° ± .01 ± .005
X<12"=± 1/32" X>12"=±1/16"
THIRD ANGLE PROJECTION
CHECK
DATE
DC
7/30/2013
DRAWN
DATE
BJE
FOLDER ‐ AV0906
7/30/2013
514 Mecklem ln Ellwood City, PA 16117
Hall Industries, Inc.
PROJECT
AV
FILE NAME
CRJ‐100 TOWBAR COMPLETE
DESCRIPTION
TOWBAR COMPLETE
SIZE DWG/PART NO.
REV
A CRJ‐100
2
SCALE 1:11 WEIGHT: 208.21 LBS
SHEET 1 OF 1
LAST SAVED: 8/1/2013 PRINTED: 8/5/2013
REVISIONS
NOTES:
REV
DESCRIPTION
DATE
BY
CHK
9
1. CRJ‐100‐HEAD HEAD COMPLETE
CRJ‐G‐KIT GUARD KIT
(INCLUDES BOTH SIDES)
11
CRJ‐PLAQUE DO NOT TOW PLAQUE
3
10
19
CRJ‐7‐1‐E HEAD BUSHING
6
20
LANYARD NOT SHOWN
BUT IS INCLUDED IN HEAD ASSEMBLY
8
7
20
TB‐TAG‐METAL HALL INDUSTRIES TAG
18
TB‐8849‐14 DRIVE RIVET
13
CRJ‐700‐11‐3 ADAPTER BUSHING
1
5
12
4
ITEM
1
2
3
16
17
18
CRJ‐100‐11
ADAPTER COMPLETE
CRJ‐100 & 200
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
QTY PART NUMBER
2 CRJ‐7‐3
2 CRJ‐7‐6
1 CRJ‐100‐1
2
1
1
1
2
1
1
4
6
2
2
2
1
1
5
2
8
CRJ‐100‐4
CRJ‐100‐11‐1 CRJ‐100‐11‐2
CRJ‐100‐11‐4 CRJ‐700‐QRP
CRJ‐G‐L
CRJ‐G‐R
H508C0056ZP0000
HRJ‐145‐7‐2
HRJ‐145‐7‐5 HRJ‐145‐7‐8 HRJ‐145‐7‐9
HRJ‐145‐11‐2A
HRJ‐145‐11‐5
TB‐8312‐H7
TB‐9205‐11A‐MKM
WH4520000ZP0000
SLIDE BOLT
ADAPTER WELDMENT
SHEAR PIN
SHOULDER BOLT
QUICK RELEASE PIN
CRJ GUARD, LEFT
CRJ GUARD, RIGHT
HH BOLT 1/2"‐13 x 1.75" LONG YZP GR.5
ROLL PIN
RETAINER SCREW
ALUMINUM KNOB
HANDLE‐SLIDE BOLT PIN
STOVER LOCKNUT
WASHER FLAT 5/8" ZP SAE
NYLOC NUT 1/2"‐13
GREASE FITTING
WASHER 1/2" SAE YZP 15
CRJ‐100‐4‐ASY
SLIDE BOLT KIT
NOSE PIN
HEAD SPRING
HEAD WELDMENT
SOLIDWORKS
2
DESCRIPTION
14
X<12"=± 1/32" X>12"=±1/16"
CHECK
DATE
DC
7/26/2013
DRAWN
DATE
BJE
FOLDER ‐ AV0906
7/25/2013
PROJECT
AV
FILE NAME
CRJ‐100‐5 HEAD AND ADAPTER COMPLETE
DESCRIPTION
HEAD AND ADAPTER COMPLETE
SIZE DWG/PART NO.
REV
A CRJ‐100‐5 SCALE 1:6
0
WEIGHT: 77.89 LBS
SHEET 1 OF 1
REVISIONS
NOTES:
1.
2.
REV
1
ANTI‐SIEZE ALL THREADS & WIRE TIE BOLTS.
TAGS MUST BE INSTALLED.
DESCRIPTION
ADD DECAL
DATE
8/5/2013
BY
BJE
CHK
DC
REPAIRABLE SOFT START
2
1
LANYARD NOT SHOWN
BUT IS INCLUDED
1
HRJ‐145‐12‐5
FOR PIN ONLY
ITEM
1
2
QTY.
PART NUMBER
1 HRJ‐145‐12‐1‐SS
1 TB‐SS3.5‐D8Q
X<12"=± 1/32" X>12"=±1/16"
SOLIDWORKS
CHECK
DATE
VTM
6/29/2013
DRAWN
DATE
BJE
FOLDER ‐ TM
6/29/2013
DESCRIPTION
3.5" TUBE WITH TAG AND DECAL
SOFT START 3.5 INCH 514 Mecklem ln Ellwood City, PA 16117
PROJECT
AV
FILE NAME
HRJ‐145‐12‐1‐TE‐SS TUBE AND SOFT START TOWEYE
DESCRIPTION
TUBE AND SOFT START TOWEYE
SIZE DWG/PART NO.
REV
A HRJ‐145‐12‐1‐TE‐SS SCALE 1:5
WEIGHT: 103.25 LBS
1
SHEET 1 OF 1
REVISIONS
NOTES:
REV
DESCRIPTION
DATE
BY
CHK
1. USE ANTI‐SEIZE ON ALL THREADED HARDWARE. 7
9
8.75
WHEN THE NUT (TB‐SS4‐09)
IS PROPERLY TIGHTENED
2
3
10
8
1
2
4
5
6
ITEM
1
2
3
4
5
6
7
8
9
10
QTY
12
2
1
1
1
12
1
1
1
1
PART NUMBER
8980‐2‐2 TB‐SS3.5‐02
TB‐SS3.5‐04 TB‐SS3.5‐06
TB‐SS3.5‐10
TB‐SS3.5‐11
TB‐SS4‐05
TB‐SS4‐07
TB‐SS4‐09
TB‐SS4‐11 DESCRIPTION
WASHER NORDLOCK
STOP
END GUIDE
END GUIDE NO HOLE
CUSHION
HH BOLT 3/8"‐16 x 3/4" LG ZP GR5 DRILLED HEAD
TUBING
DOWEL PIN 1/4" DIA. x 2" LONG SS
NUT 1‐1/4"‐7 THREAD GR5 ZP
EYE & SHAFT
X<12"=± 1/32" X>12"=±1/16"
SOLIDWORKS
CHECK
DATE
VTM
6/29/2013
DRAWN
DATE
BJE
PROJECT
AV ~ SS EYE D8Q, HRJ
FOLDER /
FILE NAME
AV0801/ TB‐SS3.5‐D8Q SOFT START 3.5 INCH ~ FOR MANUAL
DESCRIPTION
SOFT START 3.5 INCH SIZE DWG/PART NO.
REV
A TB‐SS3.5‐D8Q
06/29/2013 SCALE 1:5
WEIGHT: 24.17 LBS
0
SHEET 1 OF 1
REVISIONS
NOTES:
TB‐3.5‐EYE‐KIT 1
EYE BOLT KIT
1. TAGS MUST BE INSTALLED.
REV
1
DESCRIPTION
ADD DECAL AND KIT CALLOUT
1
DATE
8/5/2013
BY
BJE
CHK
DC
4
2
STANDARD EYELET
3
5
6
7
LANYARD NOT SHOWN
BUT IS INCLUDED
1
ITEM
1
2
3
4
5
6
7
HRJ‐145‐12‐5
FOR PIN ONLY
QTY
1
1
1
1
1
1
1
PART NUMBER
HRJ‐145‐12‐13
HRJ‐145‐12‐14
HRJ‐145‐12‐1
HRJ‐145‐12‐7
WH0110000SS0000 CN08C0000SS0000
CP4280048SS0000
X<12"=± 1/32" X>12"=±1/16"
SOLIDWORKS
CHECK
DATE
DC
7/15/2013
DRAWN
DATE
BJE
FOLDER ‐ AV0904
7/15/2013
DESCRIPTION
SHOULDER BOLT
CURVED WASHER
3.5" TUBE WITH TAG AND DECAL
EYEBOLT
WASHER SS
CASTLE NUT SS
PIN COTTER
PROJECT
AV
FILE NAME
HRJ‐145‐12‐1‐TE TOWBAR TUBE AND EYE
DESCRIPTION
TOWBAR TUBE AND EYE
SIZE DWG/PART NO.
REV
A HRJ‐145‐12‐1‐TE
SCALE 1:5
WEIGHT: 91.31 LBS
1
SHEET 1 OF 1
REVISIONS
NOTES:
5
1. TAGS MUST BE INSTALLED.
REV
3
DESCRIPTION
DATE
BY
CHK
4
9
8
6
1
2
ITEM QTY PART NUMBER
1
1 CRJ‐400‐1
2
2 CRJ‐WHEEL
3
2 HRJ‐145‐12‐3
4
4 TB‐8849‐14 5
4 TB‐8898‐5
6
4 TB‐8898‐6
7
2 TB‐8898‐8
8
2 TB‐8898‐9
9
1 TB‐TAG‐METAL 7
PROJECT ID
SOLIDWORKS
PROJECT
FILE NAME
DESCRIPTION
AV1000 CHECK
DATE
DC
1/20/2011
DRAWN
DATE
BJE
1/20/2011
DESCRIPTION
WHEEL CARRIAGE WELDMENT
WHEEL
CLAMP
DRIVE RIVET
CLAMP BOLT
CLAMP NUT
WASHER
PIN COTTER
HALL INDUSTRIES TAG
AV
CRJ‐400 FIXED WHEEL CARRIAGE
FIXED WHEEL CARRIAGE
SIZE DWG/PART NO.
REV
A CRJ‐400
SCALE 1:5
0
WEIGHT: 35.23 LBS
SHEET 1 OF 1
1
2
3
4
5
6
7
9
10
11
13
14
15
16
17
18
19
20
21
22
23
24
25
26
DESCRIPTION
PUMP MOUNTING 1
LIFT‐1
BRACKET
LOWER PIVOT 1
LIFT‐4
SHAFT
WHEEL ARM 1
LIFT‐3
WELDMENT
WHEEL ARM PIVOT 1
LIFT‐2R
SHAFT/ W 2 COLLARS
WHEEL ARM PIVOT 1
LIFT‐6
WELDMENT
HEX SOCKET 2
LIFT‐8
SHOULDER BOLT
2
TB‐8986‐9
FLAT WASHER ZP
FLAT WASHER SAE 4
LIFT‐11
ZP
COTTER PIN, PIVOT 2
LIFT‐12
SHAFT
1
LIFT‐14
CLEVIS PIN
4
TB‐8714‐1
HEX BOLT GR5 ZP
2
TB‐8898‐7
WHEEL 10"
FLAT WASHER USS 2
TB‐8898‐8
ZP
4
TB‐8898‐9
COTTER PIN, AXLE
HYD CYLINDER 1
TB‐8714‐20 W/QUICK DISC, CPLG
1
TB‐8714‐23 HYDRAULIC HOSE
1
TB‐8714‐24 HYDRAULIC PUMP ASSEMBLY
4 HRJ‐145‐12‐3 HANDLE/WHEEL ASSY CLAMP
8
TB‐8898‐5
HEX BOLT GR5 ZP
HEX NUT NYLOCK 8
TB‐8898‐6
ZP
4
TB‐8714‐2
LOCK WASHER ZP
2
TB‐8714‐10 EXTENSION SPRING
1 TB‐TAG‐METAL IDENTIFICATION TAG (NOT SHOWN)
4
TB‐8849‐14 DRIVE RIVET FOR TAG (NOT SHOWN)
PROJECT ID
SOLIDWORKS
PROJECT
FILE NAME
DESCRIPTION
AV1000 CHECK
DATE
REG‐LIFT REGIONAL TOWBAR LIFT
REGIONAL TOWBAR LIFT
SIZE DWG/PART NO.
DC
11/20/2010
DRAWN
DATE
BJE
11/20/2010 SCALE 1:1
REV
A REG‐LIFT
0
WEIGHT: 50 LBS
SHEET 1 OF 1
REVISIONS
REV
1
DESCRIPTION
CLAMP ANGLE
DATE
BY
12/17/2012 BJE
CHK
VTM
1
2
3
4
1
2
3
4
HRJ‐145‐12‐2
TB‐8898‐5
HRJ‐145‐12‐3
TB‐8898‐6
1
4
2
4
DESCRIPTION
HANDLE
CLAMP BOLT
CLAMP
CLAMP NUT
PROJECT ID
SOLIDWORKS
PROJECT
FILE NAME
DESCRIPTION
AV1000 CHECK
DATE
DC
1/20/2011
DRAWN
DATE
BJE
1/20/2011
AV
HRJ‐145‐12‐2ASY HANDLE ASSEMBLY
HANDLE ASSEMBLY
SIZE DWG/PART NO.
REV
A HRJ‐145‐12‐2ASY
SCALE 1:4
WEIGHT: 3.78 LBS
1
SHEET 1 OF 1
REVISIONS
NOTES:
1.
REV
DESCRIPTION
DATE
BY
CHK
USE WHEN FACTORY INSTALLED DRAG PLATES HAVE BEEN WORN DOWN.
1
2
3
4
ITEM
1
2
3
4
QTY
2
1
1
2
PART NUMBER
TB‐8898‐6
HRJ‐145‐12‐3
AV1009‐3001
TB‐8898‐5
PROJECT ID
SOLIDWORKS
AV1009 CHECK
DATE
BJE
6/27/2012
DRAWN
DATE
BJE
6/27/2012
DESCRIPTION
CLAMP NUT
CLAMP
DRAG PLATE WELDMENT
CLAMP BOLT
PROJECT
AV
FILE NAME
AV1009‐0002 TOWBAR DRAG PLATE 3.5 INCH BOLTED
DESCRIPTION
TOWBAR DRAG PLATE 3.5 INCH BOLTED
SIZE DWG/PART NO.
REV
A AV1009‐0002
SCALE 1:2
WEIGHT: 2.57 LBS
0
SHEET 1 OF 1
Hall Industries Equipment Division ~ AIRLINE ORDERS FAX#: 724 758‐1558 PHONE # : 724 752‐2000 ORDER DATE:________________ TAKEN BY:_____________ TIME: _______ AIRLINE CODE:_____________ PERSON CALLING:_________________________ PHONE#: _____________________ FAX: _________________ E‐MAIL ADDRESS:_____________________________ CUSTOMER P.O.# ________________________________ MASTER CARD# _____________________________________________________________________________ EXP. DATE: _______________ CVC# __________ SHIP DATE: ________________________HOW TO SHIP: UPS: GRD _______ RED ______ OTHER __________ FED EX: GRD ______ O/N ________ O/N P1 _____ OTHER _______ Acct. # __________________________ TRUCKING COMPANY:__________________________________________ HUB : __________________________________ EMPLOYEE # __________________________________ BILLING ADDRESS: SHIP TO ADDRESS: PART NUMBER: DESCRIPTION: QTY: PRICE: NOTES:______________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________ Other Products and Custom Design Services:
Hall Industries provides a number of additional products beyond our towbar line. Some of the custom
projects that we have done are shown below. We have our own engineering staff along with machine,
fabrication, and GSE maintenance shops. We can design and build your ideas to increase safety,
productivity, and profits.
0017-0001 Custom Towbar (Solve a Problem)
<<This project involved designing and manufacturing a custom towbar
to be used in the Nuclear Industry. This towbar shipped complete with
custom shear pins calibrated to the application.
IA-8980 Preconditioned Air Inlet (PCA)
Adapters
<< Our PCA Inlet Adapters are part of
our GSE product line. We inventory all
of the parts and can ship usually the
same day as ordered.>>
0010-0001 Certified Transmission Lifting Bracket (Meet a Demand)
A customer came to us with a lifting problem. They needed a tested
and certified lifting bracket to prevent them from getting cited by
OSHA. We designed, tested, and fabricated a solution. >>
<<1000-3002 Adapter 8312 to Tronair
1000-0001 Hydro Adapter Assembly>>
Hall Industries offers adapters for
nearly every towbar (even
competitors) that allow you to use our
towbar tubes / heads with your
existing equipment.
Besides the products listed above some of the other things that we sell include PCA ducting, Solid PBB
tires, and baggage cart tires.
Feel free to contact us about your GSE problems; after all we are “The Problem Solvers”.
Manufacturing Solutions Since 1966
Page 1

crj-100/200 towbar manual

Transcription

Similar documents

For Release: Nissan Patrol Y62 ST-L, TI, TI-L Replacement

VL-Whisper - Clay

front suspension lift

CRJ Series - Commercial Aircraft

FRONT SUSPENSION LIFT

SUTPHEN TOWERS INCORPORATED COLUMBIA,MISSOURI HS

Tactair Paris Air Show Evite 2015

WWW.OZERODSHOP.NET

UQ-11 Towable Mixer English Catalogue

Product Brochure