plug in bug zapper

MAINTENANCE NOTE:
The collection grid must be completely
dry before placing cover back on the
unit. When dry replace the cover by
pushing it back on the unit, aligning
the pegs with the holes on the front of
the unit. Your Bug Zapper can now be
enjoyed again! See diagram D.
C.
model BZ01
BUG ZAPPER
plug in bug zapper
IMPORTANT:
DO NOT GET THE UNIT OR PARTS WET
WHILE IN USE.
Directions for Use
SAVE THESE INSTRUCTIONS
WARNING
To reduce the risk of fire, electric shock or injury when using any
electric appliance precoautions shoulod be made, including but not limited to:
• This unit is for INDOOR USE ONLY.
• Always unplug prior to cleaning or performing any type of service.
• To clean the exterior of the unit, use a mild solution and or dishwasher safe
detergent with water.
• If device appears to be damaged DO NOT USE.
• Use device only as described in the instructions.
• DO NOT operate the unit where there is flammable or combustible products or where
other flamable vapors are present.
• Any attempt to open the unit will void the warranty.
• NEVER handle the unit with wet hands.
• DO NOT insert any objects in the unit. Keep unit free of hair, dirt, etc.
viatekproducts.com
888-7VIATEK
WARNING:
Disassembly of the electronic components within
this unit may result in exposure to lead in the form
or a solder , which is known to to state of California to
cause cancer, birth defects and other reproductive harm.
407.248.0123
3
FOR INDOOR
USE ONLY
PARTS DIAGRAM:
A.
POWER ON:
Plug the unit into a standard wall outlet
at home or office. The Bug Zapper features
an LED that provides light 24 hours a day
with no bulbs to replace ever! See diagram A.
Cover
Plug (back)
Electro Grid
Night light
(behind cover)
viatekproducts.com
MAINTENANCE:
The Bug Zapper has a collection grid
that can be cleaned by removing the cover.
The collection grid should be cleaned at
least once a week. Be sure to unplug the
unit before cleaning. Pull the cover from
the front of the unit. With a damp sponge or
cloth and wipe all sides of the grid. To
remove buildup dip the cloth in some
alcohol or dishwasher detergent an wipe
clean. Make sure unit is completely dry
before plugging back in. See diagram C.
B.
Important:
Shake the entire unit back and forth several
times to remove any unseen particles from
the grid.
888-7VIATEK
407.248.0123
1
viatekproducts.com
888-7VIATEK
407.248.0123
2