Separates - AudioSource

Separates
amplifiers
From our original Amp One/A to our latest Amp Four
AudioSource has produced a distinguished line of
stereo power amplifiers. our amps provide high sound
pressure levels, as well as subtle details with accuracy
and transparency. You won’t find a better sounding
amps at anywhere near the price.
A torodial power transformer keeps stray magnetic
fields to a minimum and the discrete output devices
ensure pure signal fidelity. separate channel level
controls allow for individual adjustment. A defeatable
peak limiter circuit protects speakers form distortion at
high volumes and an auto-circuit power up the unit
with a preamp signal and powers it down when no
signal is present.
Amp One/A (rear)
Our Amp Four is the perfect blend of performance and
aesthetics Rated at 150 watts per channel in stereo
and bridgeable to 400 watts, the Amp Four produces
high sound pressure levels as well as subtle details
with accuracy and transparency, while striking dual
analog VU meters display the output power even at
low output levels.
Amp One/A Stereo Power Amplifiers
80 watts x 2 (8 Ω) RMS
200 watts bridged (8Ω) RMS
Left and right channel level controls
Torodial power supply
<0.04% THD, >110dB S/N ratio, 2dB headroom
Line output jacks
Stable into 2Ω loads
Dimensions & Weight:
Amp One/A 2.25´´ x 16.5´´ x 11.5´´
Amp Two
Amp Two Stereo Power Amplifiers
16 lbs
80 watts x 2 (8 Ω) RMS
200 watts bridged (8Ω) RMS
A/B speaker switching
“Auto-on” signal sensing circuit
Dual analog VU meters
Left and right channel level controls
Torodial power supply
<0.04% THD, >110dB S/N ratio, 2dB headroom
Line output jacks
Stable into 2Ω loads
Dimensions & Weight:
Amp Two
2.25´´ x 16.5´´ x 11.5´´
16 lbs
Amp Three Stereo Power Amplifiers
150 watts x 2 (8 Ω) RMS
Amp Three
400 watts bridged (8Ω) RMS
A/B speaker switching
“Auto-on” signal sensing circuit
Left and right channel level controls
Torodial power supply
<0.04% THD, >110dB S/N ratio, 2dB headroom
Line output jacks
Stable into 2Ω loads
Dimensions & Weight:
Amp Three 3.5´´ x 16.5´´ x 13.25´´
27 lbs
Amp Four Stereo Power Amplifiers
150 watts x 2 (8 Ω) RMS
Separates
Amplifiers
Preamplifiers
Equalizers
Amp Four
400 watts bridged (8Ω) RMS
A/B speaker switching
“Auto-on” signal sensing circuit
Dual analog VU meters
Left and right channel level controls
Torodial power supply
<0.04% THD, >110dB S/N ratio, 2dB headroom
Line output jacks
Stable into 2Ω loads
Dimensions & Weight:
Amp Four
3.5´´ x 16.5´´ x 13.25´´
27 lbs
Separates
preamplifiers
Your preamplifier is the control center of your audio
system. A good preamp, such as our PreOne/A, offers
enough inputs and outputs to run your system and
combined with an amp it gives you power with little
noise. The PreOne/A provides six input jacks for
connecting components, which can then be selected
from the front panel. Treble, bass, balance and volume
can also be adjusted. Two sets of master line outputs
allow for direct subwoofer or multiple amplifier
connections. A tape loop is provided for outboard
processors.
The PreAmp/Tuner Two is a versatile component that
combines the most useful features of a stereo
preamplifier and an AM/FM digital tuner. As a
preamplifer, the unit provides six digitally switched FET
inputs, as well as jacks fro three video input sources
with full switching and dubbing capabilities. Two sets of
line outputs allow easy connection to a powered
subwoofer or additional amplifiers. All RCAjacks are
gold plated to improve the signal transfer. The tuner
features eighteen random station presets, accessible
from the remote control or the front panel. The digital
display shows station frequency, signal strength, station
preset, memory mode, band selection and stereo and
auto tuning modes.
equalizers
Pre One/A (rear)
Preamp/Tuner Two
Equalizers are the most cost effective way to improve
any home audio system. Flat frequency response,
uniform output across the entire bandwidth is a feature
of any great system. This can be impeded by room size
and shape, source material and the limits of any sound
system. An equalizer can negate poor acoustics, help
balance low-quality recordings and make your system
sound more realistic.
The AudioSource EQ100 and EQ200 are versatile,
affordable graphic equalizers. Illuminated LED’s in the
twenty sliders let you check your settings even from
across the room. The bright spectrum analyzer displays
allow you to monitor your system’s output. Left and
right sliders can be set independently, as can level
controls for each channel. And with 90 & 95dB
signal/noise ratios and 0.02% & 0.01% THD, the
EQ100 and EQ200 quietly balance your system.
Preamp One/A Stereo Preamplifier
Six line level inputs
Two preamp outputs
Tape loop for outboard processors
Volume, balance, bass and treble controls
<0.008% THD, >110dB S/N ratio
Dimensions & Weight:
Amp Two/A 2.25´´ x 16.5´´ x 11.5´´
16 lbs
EQ200
Preamp/Tuner Two Stereo Preamplifier & Digital Tuner
Full function wireless remote
Seven line level inputs (including phono)
Two preamp outputs
18 tuner presets
5 volt DC trigger
3 video source inputs with switching
Tape loop for outboard processors
<0.008% THD, >110dB S/N ratio
Dimensions & Weight:
PreAmp/Tuner Two
2.25´´ x 16.5´´ x 11.5´´
15 lbs
EQ100/EQ200 Stereo Graphic Equalizers
AudioSource ®
9300 North Decatur
Portland, OR 97203
tel: 503.286.9300 • fax: 503.978.3302
email: [email protected]
www.audiosource.net
10 bands per channel
Multi-colored spectrum analyzer display
Two line inputs
EQ100 - One tape monitor loop; EQ200 - Dual tape monitor loop
LED’s in all sliders
<0.002% THD - EQ100
<0.001% THD - EQ200
>90dB S/N ratio - EQ100
>95dB S/N ratio - EQ200
5Hz - 100kHz (± 5dB) frequency response
Dimensions & Weight:
EQ100
2.5´´ x 16.5´´ x 8´´
EQ200
3.5´´ x 16.5´´ x 11´´
7 lbs
9.5 lbs