Weistec M156 ENGINE - Weistec Engineering

Weistec M156 ENGINE - Weistec Engineering

______________________________________________________________________________
Weistec M156 ENGINE
High Flow Air Filters Installation Guide











2008-Present C63 AMG (Sedan and Wagon)
2012-Present C63 AMG Black Series
2007-2008 CLK63 AMG
2008 CLK63 Black Series
2007-2010 CLS63 AMG
2007-2011 E63 AMG (Sedan and Wagon)
2007-2010 S63 AMG
2007-2011 ML63 AMG
2007 R63 AMG
2008-2010 CL63 AMG
2009-2011 SL63 AMG
Manual P/N: 04-157-00029-8
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
1
______________________________________________________________________________
WEISTEC M156 High Flow Air Filters
Thank you for your purchase of the Weistec M156 High Flow Air Filters for the Mercedes AMG
63 6.2L vehicles. Please follow all directions, and keep a clean work space when commencing
installation.
Tools Required



Flat Head Screw Driver
T25 3/8” Bit
3/8" Drive Ratchet
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
2
______________________________________________________________________________
I.
High Flow Air Filter Install
a. Remove Mass Air Sensor clip covers
b. Unplug Mass Air Sensors
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
3
______________________________________________________________________________
c. Use Flat Head Screwdriver to loosen clamps on the airboxes
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
4
______________________________________________________________________________
d. Remove Engine cover by genlty pulling it up.
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
5
______________________________________________________________________________
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
6
______________________________________________________________________________
e. Remove Air inlet tubes by pulling them off the airboxes
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
7
______________________________________________________________________________
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
8
______________________________________________________________________________
f. Remove Air Boxes from vehicle
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
9
______________________________________________________________________________
g. Remove five T25 torx screws from each airbox
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
10
______________________________________________________________________________
h. Separate airboxes to reveal the air filters. At this point, pull out the OEM air
filter and install the Weistec M156 High Flow Air Filters.
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
11
______________________________________________________________________________
i.
Screw Air Boxes back together
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
12
______________________________________________________________________________
j.
Perform the steps “a” through “f” in reverse order to complete installation. Be
sure air boxes are securely installed, the Mass Air Sensor connectors are
properly plugged in, and that the air boxes are properly installed in the Inlet Y
and securely clamped. Improper installation of air boxes will result in Check
Engine Light
Phone 877-WEISTEC Fax 888-516-8219
www.weistec.com
13