Replacement Parts for Atronic - Suzo | Gaming, Amusement

Transcription

Replacement Parts for Atronic
Gaming Catalogue
LCD Upgrade kits
•
•
•
•
Upgrade your older machines with a modern look and
attract more players.
High-grade LCD panels and components providing better picture quality, balanced picture image and longer life span with no “burn-in” like CRT monitors.
Drop-in replacements for 17” and 19” games ( Slant top and Upright cabinets ).
Installed on the casino floor in less then 15 minutes.
17” LCD Upgrade for Atronic Cashline
Front
•
•
•
•
•
•
•
•
Direct replacement for Atronic machines.
For 17” Atronic universal cabinet ref. 65018825 and
65024300.
Premium PVA panel with widest viewing angle available
- 178º.
Units include a durable plastic injection molded bezel
which provides for easy installation.
These LCDs are designed to meet the rugged 24/7
demands of the Gaming Industry.
Manufactured with premium grade components.
Designed to run cooler, last longer.
Available as a complete touchmonitor
(includes touchscreen, controller and bezel) or LCD
monitor only without touch.
Part no.
H49-4096-00
H49-3917-00
Description
17” LCD Touchmonitor
17” LCD Monitor
15” LCD Touchmonitor for Atronic
Cashline
•
•
•
•
15” LCD so same size as old 17”CRT.
Uses ELO SAW technology so resistant against scratches.
Door mount solution.
Cost effective.
Part no.
150TFT0008
Description
15” LCD Touchmonitor for Cashline
Atronic Ref.
65024300
65018825
17” LCD Upgrade for Atronic
Back
• Touchmonitor (including touchscreen, controller and
bezel).
Part no.
150MG4090
Description
Atronic Ref.
65033963
Part no.
32” LCD with Touchscreen.
•
•
•
•
•
•
•
150MG4077
Give new life to your old Atronic machine #65049946.
Kits are made with high grade Samsung panel and offers
a better picture quality with no “burn in”, than traditional
CRT’s.
Includes touch screen and controller.
LCD has a wide viewing angle (178º in all directions).
Analog and digital inputs.
Supports up to 16.7 million colours.
Analog and digital inputs.
Part no.
H49-0179-00
Description
• Available as a complete touchmonitor
(includes touchscreen, controller and bezel) or LCD
monitor only without touch.
Description
H49-2561-00
17” LCD Monitor
150MG4095
Description
17” VGA Cashline monitor without touchscreen
Atronic Ref. 65018825
17” VGA Cashline monitor including touchscreen
Atronic Ref. 65024300
Atronic Ref.
65049946
17” LCD Upgrade for Atronic Emotion
Part no.
H49-2562-00
17” Replacement CRT Monitor for
Atronic Cashline Machines
Atronic Ref.
65046618
65045035
65040184
19” LCD Monitors for Atronic
• Available as monitor without touch,with touchscreen
only or complete touchmonitor including touchscreen,
controller and bezel.
Part no.
H49-0148-00
H49-0181-00
H49-0150-00
Description
19” LCD monitor without touchscreen
19” LCD monitor including touchscreen
W W W. S U Z O. C O M
Atronic Ref.
65051695
65050609
65051696
145
Replacement Parts for Bally Gaming
Hopper Knife
Lamps
• Used in all hoppers.
• Plastic model with stainless steel insert.
Part no.
14-0281
Description
Hopper knife
Bally Ref.
P846-1 / M03068-001A
Metal Hopper Knife
Part no.
H95-4114-00
H95-4115-03
H95-4118-90
HE108-387
HE108-399
Microswitch
Description
Microswitch
Description
Microswitch
Microswitch
Microswitch
Microswitch
Microswitch
Bally Ref.
E-00108-0223
E-00108-0377
E-00108-0344
E-00108-0387
E-00108-0399
Bally Ref.
E108-200
Description
Rock and roller assembly
Bally Ref.
A2893-6
• Used for replacement of incandescent lamps in buttons.
• 5mm (T1-3/4).
Part no.
161-412059
Description
12V LED
Bally Ref.
83779
Coin Deflector
Part no.
14-0095
Description
Coin deflector
Bally Ref.
P839
Bally Ref.
R526
Doorswitch
• Push / Pull ( cheat ) function.
• 4.8x0.8mm ( 0.187”x0.032” ) terminals.
• Bally ref. E-00108-0384.
Part no.
22-0746-1
Description
Doorswitch
Bally ref.
E-00108-0384
Hopper Motor
• 24V 31rpm.
Bally Ref.
E119-520
Fluorescent Lamps
Part no.
F4T5CW
F6T5CW
Description
Fluorescent lamp 4W
Fluorescent lamp 6W
F8T5CW
Fluorescent lamp 8W
F14T8CW
F15T8CW
F18T8K24CW
Fluorescent lamp 14W
Bally Ref.
E-00412-0025
E-00412-0006
E-00412-0005
E-00412-0021
E-00412-0014
E-00412-0013
E-00412-0019
Description
Starter 14-15-20W
Starter 4-6-8W
Bally Ref.
E-00411-0008 / 9 / 10
E-00411-0007
Description
PSU Board
Eproms
146
Bally ref.
E-00108-0385
Replacement power supply board for Bally slots.
Used in Bally pro series and Bally 5000, V7000 and
V7200 series.
63.5 Watts.
Part no.
H80-1178-00
Description
Hopper motor
Description
Doorswitch
PSU Board
•
•
•
Part no.
14-0654-1310
Part no.
H53-7028-00
Part no.
FS2
FS5
• Including bushings.
Description
Agitator
• Push ( momentary ) function.
• 4.8x0.5mm ( 0.187”x0.02” ) terminals.
Starter for Fluorescent Lamps
Agitator
Part no.
14-0571
Doorswitch
White LED
Rock and Roller Assembly
Part no.
14-0455-1
Packing
100
100
100
100
100
10
10
10
100
10
10
• Used in various applications in Bally slant top and upright.
Description
Hopper knife
• Used for rock and roller assembly.
Part no.
22-0715
Description
E-00120-0108
E-00125-0005
E-00125-0084
E-00125-0089
E-00125-0095
E-00125-0096
E-00125-0099
E-00125-0110
E-00125-0118
E-00125-0120
E-00125-0123
Microswitches
• Can be used in all hoppers after model 2000.
• Steel hopper knife.
Part no.
14-0296
Part no.
-73
-55
-86
-159
-86
H91-1319-10
H91-0137-00
H91-1126-10
-85
H91-1222-10
H91-1220-10
Gaming Catalogue
Circular Fluorescent Lamps
• Blank eproms.
• All STM brand.
Part no.
M27C801-100F1
M27C1001-10F1
Description
8Mb 100Ns
1Mb 100Ns
Bally Ref.
E-00867-0046
E-00867-0037
S U Z O I N T E R N AT I O N A L
Part no.
FC22CW
FC32CW
FC40CW
Description
Circular Fluorescent lamp 22W
Bally Ref.
E-00412-0020
E-00125-0116
E-00125-0115
Replacement Parts for Bally Gaming
Gaming Catalogue
Bally LCD Upgrade kits
•
•
•
•
Fluorescent Lamp for Bally Monte Carlo
• 24W compact fluorescent.
• Used behind belly glass on Bally Monte Carlo.
Part no.
H91-0771-00
Description
Fluorescent lamp for Bally Monte Carlo
Upgrade your older machines with a modern look and
attract more players.
High-grade LCD panels and components providing better
picture quality, balanced picture image and longer life
span with no “burn-in” like CRT monitors.
Drop-in replacements for 17” and 19” games ( Slant top
and upright cabinets ).
Installed on the casino floor in less then 15 minutes.
H49-6671-00
Fluorescent Lamp for Bally M9000
Topper Box
• 36W compact fluorescent lamp for Bally M9000
Topper Box.
Part no.
H91-0986-00
Description
36W Compact Fluorescent lamp
Cold Cathode for Bally M9000
•
•
•
Single raw cold cathode for Bally M9000 game with
19/20” Tatung LCD # L19LA25M21LC02 or
#L195A25M21LB01.
No wiring or connectors included.
Rated at 70.000 hours
Part no.
H91-1712-00
H49-0381-00
15” Upgrade Kit Gamemaker
• Upgrade kits for Bally Gamemaker.
Part no.
H49-0381-00
H49-6671-00
Description
Cold Cathode for Bally M9000
17” Upgrade Kit for Bally Upright
Cabinet
• Including touchscreen, controller and bezel.
Part no.
H49-2638-00
Description
Upgrade kit for Bally gamemaker V7200
Upgrade kit for Bally gamemaker V7000
Description
17” Upgrade kit for Bally upright
* Graphic Panel
not included
LCD Touchpanel Bally I-view
6000 Denom LED Panel for Bally
•
•
•
•
•
•
Direct LED display replacement panel.
Contains two LED boards, replacing original incandescent
lamps.
Equipped with connector to interface with Bally power
harness.
Installed in minutes, no special tools required.
5-8 year life span with 75% lower power consumption.
Operates on 7.5 volts DC or AC.
Part no.
H70-1813-00
•
•
•
•
6.2” LCD panel for Bally I-View player tracking system.
Complete with 5-wire touchscreen.
Direct replacement for 1st and 2nd generation I-Views.
Will replace either the IDW or Hitachi LCD.
Part no.
H49-13042-00
Description
6.2” LCD panel with touch
17” Upgrade Kit for Bally Slant Top
• Including touchscreen, controller and bezel.
Part no.
H49-0217-00
Description
17” Upgrade kit for Bally slant top
19” Upgrade Kit for Bally 9000 Upright
• Including touchscreen and controller.
Part no.
150TFT0011
Description
6000 Denom LED Panel
Description
19” Upgrade kit for Bally 9000
H91-0947-00
H91-0862-00
Cold Cathode for Bally I-View Player
Tracking System
• For use on 1st generation IDW or 2nd generation
Hitachi 6.2’ LCD panel.
• Rated at 70.000 hours.
Part no.
H91-0947-00
H91-0862-00
Description
For IDW LCD panel
For Hitachi LCD panel
Touchscreen for Bally I-View Player
Tracking System
• Replacement 5-wire touchscreen with metal housing.
• For use with 1st generation (IDW) systems.
Part no.
H49-0631-00
Description
Touchscreen for Bally I-View Player Tracking System
Mylar Overlay for Bally I-View
• Mylar overlay for Bally I-View player tracking systems.
• For touchscreen on 6.2” Hitachi LCD.
Part no.
H91-7504-00
Description
Mylar overlay
Widescreen LCD monitors
•
•
•
•
For all Bally cabinets with widescreen monitors.
Direct replacements, can be installed in minutes.
Touchscreens included.
Available in 3 sizes.
Part no.
H49-10732-00
H49-10879-00
H49-11027-00
Description
20” LCD monitor with touch
147
Replacement Parts for IGT
Gaming Catalogue
* Graphic Panel
not included
* Validator Bezel
not included
Denom Panel LED Board for IGT S2000
S2000 Bill Validator Display Board
•
•
•
•
•
•
LED lighted PCB with new bracket.
Bright green bill face and yellow panel.
Equipped with connector to interface with original
machine harness.
Installed in minutes with only a screwdriver.
5-8 year life span.
Operates on 12 volts DC.
Part no.
H70-1814-00
LED Denom Arrow Panels
•
•
•
•
•
•
Direct replacement, plug-in convenience.
5-10 year life span.
Equipped with connector to interface with machine harness.
Low heat generation, 50% lower power consumption.
Easy to install, no tools required.
Operates on 12 volts DC.
Part no.
H70-1817-00
H70-1818-00
Description
S2000 Bill Validator Display
•
•
•
•
•
Replaces incandescent lamps with crisp white LED display.
Decreases power consumption by 60%.
Powered by integrated connector interface from existing
machine socket.
Easy installation; no modification, rewiring, cutting
or drilling necessary.
Operates on existing 13.5V power supply.
Part no.
H70-1850-00
Description
Denom Panel LED Board for IGT S2000
Description
Arrow panel for Game King Upright
Arrow panel for “I” Games
Belly Glass LED Display Panel for IGT
LED Display Board for Large Graphic
Panels
•
•
•
•
LED board for large belly glass and topper graphic panels
Ideal replacement for S2000, most slant top machines,
and upright video poker topper panels.
Two minute installation with no modifications to original
hardware or wiring.
Consumes 1/6th of the energy versus a standard
fluorescent lamp.
Special hardware packs sold separately.
Part no.
H70-1867-00
•
•
•
•
•
Specially designed LED array using the latest LED driver
technology.
Custom designed mounting bracket .
Bolts easily onto existing door panel, no modifications
needed.
No ballast required, providing additional energy savings.
Return on investment is typically less than one year.
Part no.
H70-1866-00
Ticket Printer Arrow LED Boards
• Save money by replacing original boards that
prematurely burn out.
Part no.
H70-1860-00
H70-1861-00
Description
Belly Glass LED Display Panel for IGT
Description
Ticket Printer Arrow LED Board, IGT Slant Tops
Ticket Printer Arrow LED Board, IGT Uprights
Description
LED Display Board for Large Graphic Panels
Reel Denom Area LED Board
• Replaces the incandescent lamp on reel machines.
• Direct plug-in solution, brighter than the original lamp .
Part no.
H70-1862-00
H70-4187-00
Description
Reel Denom Area LED Board
H70-391700
High Intensity LED for IGT Games
* Validator Bezel
not included
* Graphic Panel
not included
Slant Top Display Side Panels
•
•
•
•
•
•
•
•
Replaces F4 lamp and entire fixture assembly.
Metal housing stabilizes brackets from falling out .
Improved colour dispersion without shadows.
5-8 year life span.
Power cord supplied for direct plug-in, operates on
12 volts DC.
Part no.
H70-1821-00
H70-1822-00
148
Description
Display Panel for 17” Slant tops
Display Panel for 19” Slant tops
Slant Top Bill Validator Displays
•
•
•
•
•
•
Greatly improve your bill face lighting.
Equipped with connector to interface with machine harness.
Operates on 13.5 volts DC.
Part no.
H70-1815-00
H70-1816-00
Description
Slant Top Display, white LEDs
Slant Top Display, Yellow/Green LEDs
•
•
•
•
Replaces F14 or F15 fluorescent lamp in IGT 17” and
19”top boxes and upright belly glass.
Diamond cut diffusing panel provides even illumination.
Easy installation, just remove the fluorescent lamp, pop
in the LED panel and the ballast power plug goes directly
into the LED panel.
Low power consumption means less heat generated.
Part no.
H70-2776-00
H70-4187-00
H70-4096-00
H70-4006-00
H70-3917-00
Used in
IGT 17” & 19”
Top Box
IGT 17” & 19”
Top Box
IGT 17” & 19”
Top Box
IGT 17” & 19”
Top Box
IGT Upright
Belly Glass
Description
F14 Replacement with horizontal
plug configuration
F14 Replacement with vertical
plug configuration
F15 Replacement with horizontal
plug configuration
F15 Replacement with vertical
plug configuration
F15 Replacement with Drop-in
bracket system
Gaming Catalogue
Coin Wiper
Part no.
119-0004
Hopper Knife Plastic
Description
Coin wiper
Coin-out Optic
Used in certain models IGT hoppers.
Part no.
119-0040
• For IGT hoppers.
Description
Hopper knife plastic
Part no.
H70-0601-00
Description
Replacement coin-out optic
IGT Ref.
37906300
Coin Deflector
Cold Cathode for IGT Nexgen Player
Tracking System
•
•
•
•
Part no.
119-0005
Description
Coin deflector
Hopper Optic Cover
For use with Hitachi 6.2” LCD panel.
Rated at 70.000 hours.
With or without wiring harness.
Sold in multiples of 10.
Part no.
H91-1056-00
• For IGT machines.
• For high security optic.
Part no.
H70-0589-00
Description
Cold Cathode with wiring harness
Left
Right
Description
Replacement hopper optic cover
IGT Ref.
68852800
3-Star Agitator
With metal inserts.
Part no.
119-0003
Description
3-star agitator
IGT Ref.
57200800
Small coin knife guide
Brake Assembly for IGT Hopper Motor
Part no.
H70-0619-00
• Now you don’t have to replace the whole motor.
Just replace the broken pawl and save big.
• Right and left available.
Part no.
H70-0825-00
H70-0826-00
Description
Right brake assembly
Left brake assembly
• For IGT small coin escalators.
Description
Replacement Wiper Assembly
IGT Ref.
68104200
Hopper Wiper Rubber
Hopper Break Spring
•
•
•
•
•
Description
Spring for break pawl
Wiper
Part no.
H70-1216-00
Description
Wiper
Description
Hopper wiper rubber
IGT Ref.
68102400
Acceptor Mounting Clip
Hopper Motor
• Used on game King and others.
• 30RPM 24V.
Description
Hopper motor
For IGT machines.
Replacement rubber track for hopper wiper.
Held in place with 2 rivets.
Sold by the foot.
12 feet per box.
Part no.
H70-0900-00
• For escalator hopper.
Part no.
H70-0495-00
IGT Ref.
58131700
Wiper Assembly
Part no.
H70-0593-00
Part no.
H70-0018-00
Description
Small coin knife guide
• Made of 6/6 nylon.
• Stronger and doesn’t dry out quickly.
• Natural colour.
Universal Drop Chute
IGT Ref.
35003290 / 35003590
Part no.
H70-0620-00
Description
Drop chute
IGT Ref.
57325100
Part no.
H42-1070-00
Description
Acceptor mounting clip
149
Gaming Catalogue
Light Pro LED Lamp Assembly
Fluorescent Lamps
Part no.
F15T8CW
F14T8CW
H91-0716-00
Description
Fluoresc. lamp 15W CW 18”-46cm
IGT Ref.
19400490
19401390
Ballast
• Ballast 25Vdc.
• For 22-40W Circular lamps and 17W fluorescent lamp.
Part no.
H70-1151-00-R
Description
Ballast
IGT Ref.
19507800
Circular Fluorescent Lamp
Part no.
FC22CW
FC32CW
Description
22W Circular fluorescent lamp
32W Circular fluorescent lamp
IGT Ref.
19403590
19403390
Mini-Lamp for IGT Jeopardy Game
•
•
•
•
Part no.
H91-1017-00
H91-1026-00
H91-1046-00
Electronic Ballast
•
•
•
•
Description
Light Pro F15/T8 LED Lamp Assembly
Light Pro F6/T5 LED Lamp Assembly
Adapter Harness for Aristocrat Games
For IGT machines.
For 8 or 15W lamps.
With polymer fuse.
0.6A, 25Vdc .
Part no.
H70-0635-00-R
H70-0824-00
Description
Electronic ballast, 15W
Electronic ballast, 8W
IGT Ref.
19507690
19506990
Very bright 2.6 watts.
Lamp No. 10969.
Wedge Base (T3.25).
12 volts.
Part no.
H91-0586-00
Stop changing fluorescents and replacing ballasts!
• LED lamp assembly replaces traditional fluorescents.
• End caps can be removed and adjusted to maximize
lighting.
• For IGT machines simply plug the LED assembly harness
into the lead that goes into the 24v electronic ballast.
• Custom configurations and other sizes available.
• Mounts in fluorescent sockets same as a fluorescent.
• Super bright flat LEDs in round clear 5/8” tube.
• 5-year life expectancy, low power, low heat, mercury
free; up to 78% in energy savings.
• No ballast required; saves you money on replacement and
maintenance costs.
• For other machines, use 24V line.
• Warranty: 2 year.
• RoHS compliant.
• Low current 24V AC/DC.
• Custom Sizes Available.
Lampholder
• For 5mm (T1-3/4) wedge base lamps or LEDS
Part no.
H70-1331-00
Description
Lampholder
IGT Ref.
12004390
Description
Mini-lamp for IGT Jeopardy game
Thin-Lite Ballast for IGT
• Used with IGT I-Game for the top box round circular lamp.
Part no.
H91-0991-00
Description
Thin-Lite Ballast for IGT
Lampholder
• For 10mm (T1-3/4) wedge base lamps or LEDS.
Part no.
H70-1467-00
Replacement LEDS
Part no.
161-306059
161-412059
Description
LED 5mm 6V white
LED 5mm 12V white
Description
Lampholder
IGT Ref.
12006690
Ballast 24Vdc - 22Watt
• Used in conjunction with 8” circular lamp.
Part no.
H70-1014-00
Description
Ballast 24Vdc
IGT Ref.
19507400
Socket for Wedge Base Lamp #86
Part no.
H70-0506-00
Slant Top Cash Light Fixture
H70-1313-00
150
Description
Slant top cash light fixture
Ref. no. 19635800 replaces 19635400A
IGT Ref.
12002790
Lamps Cross Reference List
• For IGT games.
• Fixture only.
Part no.
Description
Lamp Socket
If you are looking for IGT spare parts not listed here,
please contact our sales department for assistance.
Part no.
-47
-259
-86
Description
Ba9S 6.3V 0.15 Amp
T-3-1/4 10mm 6.3V 0.25 Amp
T-1-3/4 6mm 6.3V 0.2 Amp
IGT Ref.
19301390
19301590
19302390
Gaming Catalogue
IGT Optic Emitter
Optic/Coin-In
• For Game King.
Part no.
H70-0608-00
Description
IGT optic Emitter
IGT Ref.
37105500
IGT Cable Wire to Belly Door
• Use in IGT Game King.
Part no.
H70-0621-00
Description
Optic coin in, replacement for 75306300
IGT Ref.
75306302
• Length: 16”.
Part no.
H70-1355-00
Description
IGT Cable wire to Belly
IGT Ref.
29000600
Replacement Emitter
• For IGT games.
Part no.
H70-0478-00
Description
Replacement Emitter
IGT Ref.
57506900
Replacement Encoder Housing
• For IGT games.
Part no.
H70-0722-00
IGT Door Cable
Description
Replacement encoder housing
replacement for 64910900
IGT Ref.
64912600
• Length: 11”.
Part no.
H70-1513-00
Description
IGT Door cable
IGT Ref.
29000100
Optics Assy-Door DIB
Encoder, Door Open Receiver
• Replacement for: 57502900.
Part no.
H70-0482-00
Description
Encoder
IGT Ref.
57506800
Encl. Asm.-I/O Board
Description
Optics assy
IGT Ref.
37501000
Cold Cathode Lamps for IGT monitors
• For IGT iGame.
Part no.
H70-0990-00
Part no.
H70-1370-00
•Raw cold cathode lamps without harness.
Description
IGT Ref.
Encl. Asm. I/O board, replaces 75427802 14930203
Part no.
H91-7876-00
H91-8002-00
H91-8129-00
H91-8257-00
Description
Cold cathode for 10" LCD
Cold cathode for 15” LCD
IGT Bill Validator Bezel
Part no.
H70-1266-00
Description
IGT Bill Validator Bezel
IGT Ref.
65219400
I/O Board
Part no.
H70-0632-00
Description
I/O board
IGT Ref.
14930200 / 14940200W
24V Transformer
Mount for door-open optics.
Part no.
H70-0980-00
Description
Mount
• For IGT 8032 Processor board.
• 50/60 Hz.
• 5 Leads.
Replacement Insert
• For IGT games.
IGT Ref.
65309900
Part no.
H70-0452-00
Description
Replacement insert
IGT Ref.
58405411
Part no.
H70-1330-00
Description
24V Transformer
151
Battery
Switch mini,DPDT, Wide Lever
Cherry E61-42MA
• Lithium battery 3.6V.
• Used on S-Plus games processor board.
Part no.
H27-1236-00
Part no.
H70-1022-00
Description
Battery
Description
Switch mini
IGT Belly Door Switch
• Used in newer games such as Game King.
Part no.
H70-1023-00
Description
Door switch. replaces 51908990
IGT Ref.
51908991
Subminiature Switch Cherry E62-30A
10 Amps
Lithium Battery
• 3.6Volt 1/2AA Size with Pig Tales.
• Used in IGT “S” Plus, PE+ MPU boards.
Part no.
H27-1002-00
Gaming Catalogue
• Used as replacement switch in push buttons.
Description
3.6Volt battery
Part no.
H95-4139-00
Description
Subminiature switch
IGT Ref.
510108900
Switch Locks
Roller Switch for IGT
Coin Entry Cover Plate
•
•
•
•
•
Replacement cover plate for IGT upright machines.
Covers the opening after the top coin entry is removed.
16-gauge stainless steel.
Size: 81 x 33mm.
Supplied with four nuts to attach plate.
Part no.
H42-3412-00
•
•
•
•
•
•
•
• 5 amp switch with roller lever.
• .110 tab terminals.
Part no.
H95-0015-00
Description
Roller switch for IGT
Key is removable in OFF position only.
Momentary or ON/OFF available.
Double bitted keys are keyed alike #2341 with 2 keys
per lock.
Spade terminals.
Barrel length: 27mm.
Overall length: 22mm.
4 amps/125Vac, 2amps/250Vac.
Part no.
IGT Ref.
51015190
H30-1086-00
H30-1086-01
Description
Momentary switch lock. Key is removable only in the
OFF position
On/Off Switch lock. Key is removable only in the
OFF position
Description
Coin entry cover plate
Microswitch
Part no.
H70-0814-00
Description
Microswitch, replaces 51010890
IGT Ref.
51000190
• Used on IGT slot machines.
• 8 Ohm, .4 watt.
• 4 mounting holes.
Coin Entry Blanking Plate
Part no.
H70-0014-00
• For IGT Slant Top games.
• Plate dimensions: 168 x 73mm.
• Chrome finish.
Part no.
H70-1587-00
2” Shielded Speaker
Description
2” Speaker
IGT Ref.
13001490
IGT Switch
Description
Coin entry blanking plate
Part no.
H70-1752-00
Description
Microswitch
IGT Ref.
51015890
Self Test Switch
• 1 Amp, 120Vac.
IGT Players Panel Compression
Spring
• Size: 15,5 X 11mm.
Part no.
H70-0634-00
152
Description
IGT Players panel compression spring
IGT Ref.
33103500
Part no.
H42-8092-01
5 Amp Switch for IGT
• 5 Amp switch.
• .110 x .020 tab terminals.
Part no.
B7C022-01-ZZZZ
Description
5 Amp switch for IGT
IGT Ref.
51514790
Description
Self test switch
IGT Ref.
51602590
Gaming Catalogue
19 Pin AMP
Connectors for
IGT Monitors
Part no.
0-208210-2
0-208209-2
Description
19 pin AMP con. plug
19 pin AMP con. receptacle
IGT Ref.
21706890
21006290
6-Digit Meter for IGT Reel Machines
Solenoid Assembly
•
•
•
•
• 24Vdc.
Part no.
H42-7430-00
Contacts for AMP Metrimate
drawer Connector
Part no.
0-163083-8
0-163081-8
For IGT Players Edge Plus games.
Due to a change in Molex plug sizes, new monitors are
incompatible with older games.
Harness allows new monitors to be placed into
older games.
Part no.
H70-0579-00
Description
6-Digit meter for IGT machines
Part no.
H70-0642-00
Description
Solenoid Assembly
IGT Ref.
45003800
IGT Ref.
29203490
Description
Female 16-20 AWG tin plated
Male 16-20 AWG tin plated
Retrofit
Monitor
Harness for
IGT Games
•
•
•
6-digit non-resetable counter.
Counting speed: 20 counts per seconds.
13”flying leads.
24Vac; no diode.
Description
Retrofit monitor harness for IGT games
6-Digit Meter for IGT Reel Machines
• 6-digit non-resetable counter.
• Counting speed: 20 counts per seconds.
• PC board mounting, 24Vdc.
Part no.
H42-7431-00
Description
6-Digit meter for IGT slot machines
Panasonic Card Reader for Player
Tracking
IGT Ref.
29209390
IGT Ref.
60705501
•
•
•
•
•
Used in IGT Smart system player tracking units.
Panasonic #Zu-M2121-S352 magnetic card reader.
Black bezel included.
2 tracks, magnetic head, small size, light weight.
Size: Outside dimensions 102mm.
(W) x100mm (D) x 26mm.
Part no.
H80-1208-00
Description
Panasonic card reader
7-Digit Meter for IGT S2000 I Games
• 24Vdc.
• PC Board mounting.
Cooling Fan 24Vdc
Part no.
H42-7105-00
• 40mm x 20mm.
• Supplied complete with connector.
• Used in Game King series.
Part no.
H70-1006-00
Description
Cooling fan
Description
Meter 7 Digits
Cooling Fan
IGT Ref.
26003800
•
•
•
•
Cooling Fan
•
•
•
•
IGT Reel Master Assy with Motor
• Used in IGT “S” Plus Upright.
Part no.
H70-0594-00
Description
Reel master assembly
IGT Ref.
66001600
Part no.
H80-0006-22
80 x 80 x 25mm.
Sealed steel ball bearings for long life.
Sturdy plastic construction.
24Vdc, 0.18A.
Part no.
H80-0273-00
Description
3.15” Fan for IGT slot machines
Description
Reel optic
Description
Cooling fan
IGT Ref.
26002990
Reel Harness
Reel optic IGT
Part no.
H70-0580-00
120mm x 120mm x 38mm.
115Volt.
Supplied with lead wires.
Used in IGT machines.
IGT Ref.
37901400
Part no.
H70-0641-00
Description
Reel harness
IGT Ref.
60753600
153
IGT S-Plus Upright Repl. Button Sets
• Large and small square buttons with clear caps, white
legends and black print.
• Fitted with -555 6.3V lamps, 6 or 12V led.
• Fits IGT S-Plus machines 1995 to present.
• Set includes: 1 Large Square “Spin reels” button.
1 Large Square “Play Max Credits” button.
1 Small Square “Bet One Credit” button.
1 Small Square “Change” button.
1 Small Square “Cash/Credit” button.
Part no.
H77-KIT-300
H75-KIT-306LD
H75-KIT-312LD
Description
Button set IGT S Plus U/R 6.3V lamp
Button set IGT S Plus U/R 6V Led
Button set IGT S Plus U/R 12V Led
Mylar Overlay for IGT Nexgen Player
Tracking System
• Mylar overlay with copper tape for grounding for IGT
Nexgen Player Tracking System using that uses the Hitachi
6.2” LCD panel TX16D11VM2CAA.
Part no.
H91-1059-00
Players Edge Plus Slant Top
Replacement Button Sets
Players Edge Plus Upright
Replacement Button Sets
• Small square and rectangular buttons with clear caps.
• All buttons have white legends and black print
except the “change” button which has a red legend and
white print.
• Fitted with -86 6.3V lamp, 6 or 12V white led.
• Set includes: 5 Rectangular “Hold/Cancel” buttons.
1 Rectangular “Cash Out” button.
1 Rectangular “Bet One Credit” button.
1 Rectangular “Play 5 Credits” button.
1 Rectangular “Deal/Draw” button.
1 Small Square “Change” button.
• Small square buttons with clear caps.
• All buttons have white legends and black print, except the
“Change” button, which has a red legend and white print.
• Fitted with -86 6.3V lamp, 6 or 12V white led.
• Set includes: 1 “Change” button.
1 “Cash Out” button.
1 “Bet one” button.
1 “Max Bet” button.
1 “Deal/Draw” button.
5 “Hold/Cancel” Buttons.
Part no.
H77-KIT-100
H77-KIT-106LD
H77-KIT-112LD
Description
Button set IGT PE Plus S/T 6.3V lamp
Button set IGT PE Plus S/T 6V Led
Button set IGT PE Plus S/T 12V Led
LCD Panel with Touch Screen for IGT
Nexgen Player Tracking System
• LCD panel with touch screen for IGT Nexgen Player
Tracking System using Hitachi 6.2” panel TX16D11VM2CAA.
Part no.
Description
Mylar overlay for IGT Nexgen Player Tracking system
H91-1060-00
Description
LCD panel with touch screen for IGT Nexgen Player
Tracking system
Cold Cathode for IGT Nexgen Player
Tracking System
Touch Screen for IGT Nexgen Player
Tracking System
•
•
•
•
•
•
For use with Hitachi 6.2” LCD panel.
With wiring harness.
Sold in multiples of 10.
Part no.
H91-1056-00
Description
Cold cathode with wiring
Gaming Catalogue
Replacement 4-wire touch screen for IGT
Nexgen Player Tracking System using that uses the Hitachi
6.2” LCD panel TX16D11VM2CAA.
Also used by Aristocrat, Konami and multimedia Gaming.
Part no.
H91-1058-00
Description
Touch screen for IGT Nexgen Player Tracking system
Part no.
H77-KIT-200
H77-KIT-200L
H77-KIT-212LD
Game King Upright Repl. Button Sets
• Small square buttons with clear caps.
• All buttons have white legends and black print, except the
“Change” button, which has a red legend and white print.
• Fitted with -73 14V lamp, 6 or 12V white led.
• Set includes: 1 “Change” button.
1 “Cash out“ button.
1 “Bet one” button.
1 “Max Bet” button.
1 “Deal/Draw” button.
5 “Hold/Cancel” Buttons
Part no.
H77-KIT-700
H77-KIT-706LD
H77-KIT-700L
•
•
•
•
•
Built with Automatic Colour Adjustment so every
monitor displays the same.
Includes a high efficiency switching mode power supply.
Engineered to run cool - without a fan.
Designed for easy maintenance.
Service manuals are clear and helpful.
150MG4022
150MG4013
150MG4051
150MG4050
150MG4019
Description
Button set IGT Game king 14V lamp
Button set IGT Game king 6V Led
Button set IGT Game king 12V Led
High Quality Replacement CRT Monitors for IGT
Part no.
154
Description
Button set IGT PE Plus U/R 6.3V lamp
Button set IGT PE Plus U/R 6V Led
Button set IGT PE Plus U/R 12V Led
Description
14” 1493 Flat top mon. with touch screen & controller
for IGT games
14” VGA Mon. with touch screen for IGT game King
17” Mon. with touch screen & controller for
IGT slant top games
17” VGA Mon. with touch screen & controller for
IGT I-series games upright
20” VGA Mon. for IGT game King upright
Gaming Catalogue
LCD Upgrade kits for IGT
• Update your older machines with a modern look.
• Made from quality components including Samsung
LCD panels that offer better picture quality, balanced
picture image and a longer life span with no burn-in.
( which is typically found with traditional CRT monitors )
• Kits are drop in replacements for 17"and 19" CRT
monitors in upright and slant top cabinets.
• Available with 19 or 25 pin connection ( non-avp or avp
• Includes touchscreen, controller and bezel.
17” LCD Upgrade for IGT Slant Top
(19 pin)
•
•
•
•
Complete with touchscreen, controller and bezel.
Non-avp ( 19 pin ).
IGT ref. 69920401 / 69920000.
Available in 2 models, for machines with standard
board 75703800 / 75703900 or for machines with the
IGT 044 board.
Part no.
H49-2827-00
HCPA5051
19” LCD USB Touchmonitor for IGT
Trimline
• Complete with touchscreen, controller and bezel.
• IGT ref. 69950903W / 69950904.
Part no.
H49-0310-00
Description
19” Lcd touchmonitor Trimline
19” LCD Monitor for IGT Trimline
Part no.
H49-0297-00
Description
19” Lcd / glass Trimline
Non-Avp ( 19 pin ).
board 75703800 / 75703900 or for machines with
the IGT 044 board.
Part no.
H49-2792-00
HCPA5097
• LCD with mounted glass.
• IGT ref. 69951010.
Description
19” IGT S/T kit non-avp standard
19” IGT S/T kit non-avp for IGT 044 boards
19” Upgrade Kit for IGT Slant Top
( 25 pin )
• Avp ( 25 pin ).
Part no.
H49-2720-00
•
•
•
•
Description
19” Avp slant top kit
Non-avp ( 19 pin ).
IGT ref. 69920901 / 69919201 and 69919401.
board 75703800 / 75703900 or for machines with the IGT
044 board.
Part no.
H49-2694-00
H49-9731-00
Description
17” IGT S/T non-avp standard
17” IGT S/T non-avp for IGT 044 boards
19” LCD Upgrade for IGT Slant Top
( 19 pin )
•
•
•
17” LCD Upgrade for IGT Upright (19 pin)
Description
17” IGT Upr. non-avp standard
17" IGT Upr. non-avp for IGT 044 boards
17” LCD Upgrade Kit for IGT Upright
( 25 pin )
• Avp ( 25 pin ).
Part no.
H49-5110-00
Description
17” Avp upright kit
19” LCD Upgrade Kit for IGT Upright
( 19 pin )
•
•
•
•
Non-avp ( 19 pin ).
IGT ref. 69922300.
board 75703800 / 75703900 or for machines with the IGT
044 board.
Part no.
H49-2680-00
HCPA5020
Description
19” IGT Upr. non-avp standard
19” IGT Upr. non-avp for IGT 044 boards
19” LCD Upgrade Kit for IGT Game
King+ Upright ( 25 pin )
• Avp ( 25 pin ).
• IGT ref.no. 69926502
Part no.
H49-2713-00
LCD Upgrade Kits for Players Edge
•
•
•
•
•
•
LCD upgrades for IGT players edge and players edge plus.
Replace the old 14” CRT monitor with a 15” LCD.
Premium panels with 150 or 178 degrees viewing angle.
Includes bezel for easy installation.
Kits are direct replacements and can be installed in
minutes.
Protective glass mounted to protect LCD panel.
Part no.
H49-11326-00
Description
15” LCD upgrade players edge upright with
178 degrees viewing angle
H49-11176-00
15” LCD upgrade players edge upright with
H49-14029-00
15” LCD upgrade players edge slant top with
Description
19” Avp upright kit
Widescreen LCD Monitors
•
•
•
•
For all IGT cabinets with widescreen monitors.
Direct replacements, can be installed in minutes.
Touchscreen included.
USB connection.
Part no.
H49-12404-00
H49-12562-00
Description
20.1” LCD monitor with touch
If you need any assistance to find the
right upgrade kit for your machines,
please contact our sales department.
155
Replacement Parts for Konami / Sega Gaming Catalogue
Cold Cathode for Konami Machines
•
•
•
Dual cold cathode lamp assembly for Konami slot
machines with a 17” LCD monitor.
Wiring harness and connectors included.
Lamps rated at 70.000 hours
Part no.
H91-1654-00
H49-2430-00
Description
Cold Cathode for Konami machines
Cold Cathode Lamp for Bonus LCD
• Used in 7” bonus LCD.
• U shape CCFL including harness.
Part no.
H91-1006-15
Description
Cold Cathode
Cold Cathode for Konami Denomination
Panel
H49-0237-00
LCD Upgrade Kits for Konami
•
•
•
Part no.
H91-1831-00
• Includes touchscreen and controller.
• Premium PVA panels with wide viewing angle.
• Bezel included for easy installation.
Part no.
H49-2637-00
H49-2430-00
H49-12247-00
H49-0237-00
H49-12881-00
Description
17” LCD upgrade kit for Konami upright
for konami 530002
19” LCD upgrade kit for Konami slant top
19” LCD upgrade kit for Konami top unit
19” LCD upgrade kit replaces KT-LS19E4
22” LCD for Konami widescreen games
Single cold cathode assembly for Konami upright video
denomination backlit panel.
Includes wiring and connector.
Rated at 70.000 hours
Description
Cold Cathode for Konami denomination panel
Cold Cathode for Konami Slots
For Konami slot machines with cold cathode edge-lit
belly glass.
Dual 70.000 hour cold cathode lamp assembly
Includes one aluminium encased dual output 12V Piezo
matching inverter.
Lamp assembly includes wire harness, silicone end caps
and connectors attached.
Part no.
H91-1379-00
Description
Cold Cathode for Konami slots
• 6.2″ LCD panel for Konami Casino Management System (KCMS).
LED Edge-Lit Panel for Konami Belly
Glass
•
•
•
•
Replacement for all Konami belly glass that is currently
edge-lit with cold cathode lamps.
Powered by 12 volts directly, so there is NO inverter,
ballast or adapter needed.
Just plug the power cord directly into the existing Molex
connector that currently provides 12 volts of power to the
CCFL inverter.
LED’s will not break when the Drop Crews let the door
drop and then slam it closed.
Part no.
H91-3161-00
156
Description
Cold Cathode
SEGA Gaming
LCD Display for Player Tracking
Description
6.2″ LCD panel
• Used in 7” bonus LCD.
• L shape CCFL including harness.
Part no.
H91-4561-00
•
•
•
•
Part no.
H49-9046-00
Cold Cathode Lamp for Bonus LCD
Replacement Pushbutton
• Pushbutton is supplied without legend and lens cap.
• LED included.
Cold Cathode for Konami Belly Glass
and Konami Games
•
•
•
•
Single raw cold cathode lamp for Konami belly glass that is backlit with cold cathode lamps.
Single raw cold cathode for Konami games with 19” Kortek LCD monitors.
No wiring or connectors included.
Part no.
H91-2146-00
H91-1954-00
Part no.
125-0010
125-0011
125-0012
Description
Pushbutton only (no lens or legend plate)
Legend plate (no text)
Lens cap
Description
Cold Cathode for Konami Belly Glass
Cold Cathode for Konami Games
Replacement Arm Rest Set for Sega
Ascot Special
• Holds much longer then traditional armrests.
• Made of extremely durable polyurethane material.
• Sold as set with 1 centre piece and 2 corners.
Description
LED edge-Lit panel for Konami Belly glass
Part no.
119-1005-2
Description
Armrest set Sega Royal Ascot
Replacement Parts for Novomatic
Gaming Catalogue
19” Slant Top Touchmonitor
•
•
•
For Novomatic Multiroulette.
Windows NT.
Including ELO SAW touchscreen and controller, scratches will not influence the
touch function.
Part no.
150TFT0001
Description
19” Touchmonitor Windows NT
• Used in Novomatic (admiral) machines for top screen (non-touch).
Part no.
150TFT0003
Description
19” Touchmonitor Windows XP
Novomatic Upright Monitor Set
• Complete set for Novomatic (Admiral) upright cabinet.
• Set contains a 17” monitor and a 19” touchmonitor for the upgrade of both monitors in
the cabinet.
Description
Upright monitor set
Description
19” Slant top monitor
17” Monitor for Novomatic Upright Cabinet
• For Novomatic Multiroulette.
• Windows XP.
• Including ELO capacitive touchscreen and controller.
Part no.
150TFT0005
• For Novomatic Slant top cabinets.
• Without touchscreen.
Part no.
150TFT0002
Part no.
150TFT0006
19” Slant Top Monitor
Description
17” Upright monitor
19” Touchmonitor for Novomatic Upright Cabinet
• Used in Novomatic (Admiral) machines.
• With ELO SAW touchscreen and controller, scratches will not influence the touch function.
Part no.
150TFT0004
Description
19” Upright touchmonitor
157
Replacement Parts for Orion
Gaming Catalogue
LED
• Used in all buttons.
Hopper Knife
Part no.
14-0281
Description
Hopper knife
Part no.
C9C026-02-ZZZZ
Ballast
Orion Ref.
15820003
Description
Ballast
Orion Ref.
27001220
Hopper Sensor
Switchlock
Description
Hopper sensor
Orion Ref.
27000114
• Ballast with lampholder used for 7-9 and 11W
compact fluorescent lamps.
Part no.
22-0112
Part no.
14-1140
Description
12V LED white
Orion Ref.
81020451
Compact Fluorescent Lamps
Part no.
-9901-7CW
-9901-9CW
-9901-11CW
Description
7W lamp
9W lamp
11W lamp
Orion Ref.
27001124
27001120
27001123
• On-off switchlock.
• Keycode 2341.
Part no.
H30-1086-01
Description
Switchlock
Orion Ref.
14022070
Rock and Roller Assembly
• Used in all hoppers
Part no.
14-1145
Description
Rock and roller assy
Part no.
22-0145
Ballast
Agitator
• Includes bushings.
Part no.
14-0571
Oval Loudspeaker
Orion Ref.
81020450
Description
Agitator
Part no.
22-0105-1
22-0106
22-0109
Description
Ballast 8W
Ballast 15W
Ballast 32W / 40W
Description
Oval loudspeaker
Orion Ref.
26901003
Orion Ref.
27001205
27001201
27001202
5” Loudspeaker
Compact Fluorescent Lamps
Part no.
F8T5CW
F15T8CW
FC32CW
Description
Fluorescent lamp 8W
Circular lamp 32W
Part no.
22-0140
Description
5” Loudspeaker
Orion Ref.
26901004
Orion Ref.
27001101
27001102
27001121
Motor
• 24Vdc.
Part no.
14-1115
14-1135
4” Loudspeaker
Description
Hopper motor assy 31 RPM
Hopper motor assy 21 RPM
Part no.
22-0143
Doorswitch
158
Description
Doorswitch
Orion Ref.
26901002
Description
Test switch
Orion Ref.
26500908
Test Switch
• Double pole doorswitch.
Part no.
22-0746
Description
4” Loudspeaker
Orion Ref.
26500201
Part no.
127-26500908
Replacement Parts for Orion
Gaming Catalogue
Pushbuttons
Part no.
EAGZHAPAZZ1L2
EGGZHAPZZZ1L1
CAGZHAPZZ1EF
EBGZHAPAZZ1LF
Description
Pushbutton 27 x 27mm
Orion Ref.
26500526
26500533
26500502
26500522
17” Slant Top Touchmonitor for Orion
MEI Cashbox
• SC series Cashbox.
Part no.
M252208003P1
Description
Cashbox
Orion Ref.
27001221
•
•
•
Samsung wide viewing angle LCD panel for best picture
quality.
Including Elo SAW touchscreen and controller.
Drop-in replacement.
Part no.
150TFTS1729CE
Description
Orion Ref.
27300100
Cooling Fans and Accessories
Part no.
22-2204-2
22-2204-11-1
22-2204-4
22-2208-90
22-2208-50
22-2209-1
Description
Fan 92x92mm 220Vac
Fan 50x50mm 12Vdc
Fan 92x92mm 12Vdc
Finger guard 90mm
Finger guard 50mm
Harness for AC fan
Orion Ref.
26904977
26904940
26904950
13000029
12430185
18500511
ELO Touchscreen for Orion Cabinets
• Available in 17” for slant top and Twinstar cabinet, and
19” for Twinstar II cabinet.
Part no.
002801A-1700
E398214
Description
17” touchscreen
19” touchscreen
17” Slant Top Monitor
•
•
•
Samsung wide viewing angle LCD panel for best picture
quality.
Monitor without touchscreen or glass for upper screen.
Drop-in replacement.
Part no.
150TFT1728
Description
17” Monitor
Orion Ref.
27300098
FutureLogic GEN2 Ticketprinter
Part no.
46-0300
Description
Ticketprinter
Orion Ref.
26003010
ELO Controller for Orion Cabinets
• Available for SAW touchscreens as used in Slant Top and
Twinstar cabinet or for capacitive touchscreen used in
Twinstar II cabinet.
Part no.
D68054-000
E731406
Description
17” Controller
19” Controller
LCD Monitors for Twinstar
150-0031
12V PSU for Orion Monitors
• Available for 17” or 19” monitors.
• Only for use in monitors after 2005 where a 12V power
supply has been used.
MEI Banknotereader SC8307
• Multi width.
• RS232.
Part no.
M252009031P1
Description
Banknotereader
Orion Ref.
26003900
Part no.
150-0031
150-0032
Description
12V 3A for 17” monitor
12V 5A for 19” monitor
•
•
•
•
For all Twinstar upright models.
Available in 17” and 19”.
Drop in replacement for existing monitors.
Available as complete touchmonitor or monitor with
hardened glass.
Part no.
150TFTG1728
150TFTS1728
150TFTG1924
150TFTS1924
Description
17” Monitor with glass
17” Touchmonitor
19” Monitor with glass
19” Touchmonitor
Orion Ref.
27300102
27300101
27300202
27300201
159
Replacement Parts for WMS
Fluorescent Tubes
• Only brand names like Osram, Sylvania or Philips.
Part no.
F8T5CW
F14T8CW
F15T8CW
H91-0716-00
F18T8K24CW
H91-0159-00
Description
Fluorescent tube 8W
Fluorescent tube 14W
Fluorescent tube 18W 24” 61cm
Circline lamp 22W
WMS Ref.
24-8833
24-8836
24-8809
24-010242
24-8147
24-11504
Gaming Catalogue
Cold Cathode for
WMS Bluebird
•
•
Triple cold cathode replacement assembly for WMS
Bluebird slots with 17” LCD monitor.
Includes three 70.000 hour cold cathode lamps, attached
wire harness, connectors and silicone end caps.
Part no.
H91-2820-00
Ballast
• Ballast for 15W fluorescent lamps.
• Used on WMS Bluebird.
Description
Cold Cathode assembly for WMS Bluebird
Part no.
H20-10481.1
Description
Ballast
Cold Cathode Assembly for
WMS Bluebird
•
•
•
•
Compact Fluorescent Lamp
• 5 Watts Cool white.
• Used in WMS Bluebird.
Part no.
-9902-5CW
Part no.
H91-1006-10
Description
Compact fluorescent lamp
Description
14V 0.08A
T-3-1/4 6.3V 0.1Amp
Description
Cold Cathode assembly for WMS Bluebird
Dual Lamp Ballast
• Input 100-240Vac.
• WMS ref.no. 5610-008027-00.
Part no.
H44-1500-02
WMS Ref.
24-8880
24-8768
•
•
•
Single lamp assembly for 6.4” LCD (LG #LB064V02) in
WMS Bluebird bonus screen.
Includes wiring and connectors.
Part no.
H91-1771-00
Description
Cold Cathode for WMS Bluebird bonus screen
Xenon 591 Bulb
Ballast
• 22W ballast.
• Ref.no. UB905-22.
Part no.
H20-011580-00
• Used on WMS Bluebird tower light.
• Wedge base. T3-1/4-10mm
• 14V.
Part no.
H91-1018-00
Description
Dual lamp ballast
Cold Cathode for WMS Bluebird Bonus
Screen
Miniature Lamps
Part no.
-73
-159
For use in WMS Bluebird slot machines that use a 18”
LCD monitor.
Convenient “plug-n-play” assembly.
3-cold cathode assembly rated at 70,000 hours.
Wiring harness and connectors included.
Description
Ballast 22W
Description
Xenon 591 bulb
LCD Panel for WMS Bluebird Bonus
Screen
• 6.4” LG LCD panel LB064V02-TD01.
• This is the LCD panel for bonus screen.
• Excluding touchscreen.
6-Digit Meter for WMS Gaming
•
•
•
•
•
•
•
6-digit non-reset meter counts up to 600 coins per minute.
Back of panel mounting style.
Ultrasonically welded tamper-proof end cap.
Pulse length: 50 ms min.
Dimensions: .75 W x .125 H.
Power consumption: 5 watts.
Voltage: 6Vdc.
Part no.
H42-7427-00
160
Description
6-Digit meter for WMS gaming
WMS Ref.
20-9951
Part no.
H49-9181-00
Touchscreens
Description
6.4″ LCD for WMS bonus screen
Gas Strut for WMS Slant Top Slots
• Allows door to be held open without assistance.
• Williams old ref no. 20-003068.
Part no.
H70-0315-00
Description
Gas Strut for Williams Slant Top Slots
WMS Ref.
20-004294
•
•
•
•
Used in WMS cabinets.
For easy identification check 3M part no on existing
touchscreen.
18.87”screen is used on older Bluebird cabinet with
Kristel LCD 18-009 / WMS ref.no. A-009807-14.
19.74” screen is used on newer Bluebird cabinet with
Kristel LCD 19-011 / WMS ref.no. A-012506-00-00.
Part no.
H49-2296-00
H49-2587-00
H49-2882-00
H49-2883-00
Description
18.87” Touchscreen
3M Ref.
17-8351-223
17-8551-223
17-8441-223
17-9311-227

Replacement Parts for Atronic - Suzo | Gaming, Amusement

Transcription

Similar documents