MAKuick quick release mount in two pieces. For bolt - Arms-cz

Transcription

MAKuick quick release mount in two pieces. For bolt - Arms-cz
KILIC FEINTECHNIK GmbH
Hauptstr. 26, D-97534 Waigolshausen, Germany,
Tel. +49 (0)9722 1829, Fax +49 (0)9722 7748, [email protected]
All information subject to change
www.mak.ag
Mounting Systems Made in Germany
English
Presentations
Classical
MAKschwenk
Pivot mount in two pieces
4-7
Besides our existing productline we would like to present you the latest MAK
developments.
These new innovations, partially world wide, have been tested in the most
­extreme situations to make sure that they are worthy of the name MAK,
the name of precision.
Constant innovation and improvements make our products ready for the highest
quality standard, serving our clients. In this process longstanding standards are
improved upon, and the existing best is optimized.
Bases for lockup
for pivot mounts
8
Locks and height spacers,
for pivot mounts
9
Rear rings and rear rail
prism for ­pivot mounts
in two pieces
10
Rear feet
for pivot mounts
in two pieces
10
Front basen
For pivot mounts
10-11
Front feet for pivot mounts
in two pieces
12-13
Flexible
MAKflex Mounts
14-17
If you are interested in best quality stocks, and stock-blanks; besides our technical
products, then please contact us for further information.
Thanking you for your trust in MAK­products.
With best regards
Michael Ali Kilic, President
2
09
Parts for MAKflex-,
Bridge- and
MAKuick Quick Release-Mounts
19
Bridgemounts
18
Quick
Technical
MAKuick
Quick release mounts
in one piece
20-23
MAKipp
Fixed tipp-off
mounts in one piece
23
Mauser bolt action
38
Accessoires
for hunting guns
38
MAKuick
Quick release mounts
in two pieces
24-25
Adapterbases for
quick release mounts
26-27
Trapdoor cartridge
reserves, butt plates,
trigger guards,
pistol grip caps
39
Set trigger, trigger
39
Professional
Valuable
MAKmilmont
Tactical mounts
28-31
Custom parts and stocks
for Blaser R 93
Colour case hardening
40-44
Stable
MAKfix
fixed mounts
in two pieces
32-33
Innovative
Mounts for
Red Dot Sights
34-37
09
3
Classical
Worldwide the l­ owest two piece pivot mount.
4
09
09
5
MAKschwenk – two piece pivot mount.
With rotation or lever lock. For bolt action rifles and drop barrel guns.
10 2 2 - 3 0 0 8 0
Order-example 10...:
MAKschwenk – two-piece pivot mount with rotation lock / height 17 mm /
with 26 mm offset of frontfoot / for diameter 30 mm maintube / for Sauer 202
With rotation lock
15
With lever lock
Height = BH
BH
Order-No.
BH
Order-No.
14 mm
0
17 mm
2
15,5 mm *
1
18,5 mm *
4
22 mm **
7
Offset of front foot = KR
KR * Zeiss ZM/VM only
** 34 mm only
Order-No.
0 mm
0
26 mm
2
34 mm
4
49 mm
6
KR
KR
Scope
Maintube Ø
1” / 26 mm
Maintube Ø
30 mm
Maintube Ø
34 mm
Exterior rail
Zeiss
ZM/VM rail
Swarovski
SR rail
Schmidt&Bender
rail
Solutions for Docter-Sight,
Aimpoint Comp, Z-Point ­available
only with our ­revolutionary mount
MAKlick, see page 346
Order-No. 26
WKZ = ID number for rifle
6
09
30
34
40
45
60
70
Bolt action rifle
Drop barrel guns
Model
WKZ
RWS/Rössler
Titan 6
108
Model
WKZ
Antonio Zoli
1900
067
Sabatti
Rover 075
Antonio Zoli
Drop barrel rifle 505
Benelli ARGO
003
513
041
047
065
053
054
Silver Sable
Fox, CZ 527, ZKB 680 ZKK 600, CZ 550
CZ 531
Forester,
Finnbear, Finnwolf 75, 85
Beretta
BRNO
Sako
B. Rizzini
Drop barrel rifle
502
Santa Barbara
Bolt action rifle
044
Browning
525 Express
507
Carl Gustav
1896, 1900 2000, 3000
4000
005
095
037
Chapuis
O/U Express Superposé
S/S Express Juxtaposé
500
503
FN Browning
A-Bolt, Eurobolt BAR I, BAR II, CBL, Acera
BLR, CLR
European
Browning Mauser
X-Bolt
002
003
057
056
004
128
F.A.I.R
techni-mec
Heckler & Koch
SLB 2000
058
Heym
SR 20 SR 21
SR 21 Model 2004
SR 30
SR 30 Model 2004
060
039
139
099
199
Kongsberg
M 389
061
Krico
600, 700, 900, 902
006
Krieghoff
Semprio
118
Lakelander
M 389
071
Mauser
225 Titan II 66, 66S, 66SM
94, 96 Nr. <96011999
94, 96 Nr. >96012000 K 98
035
009
094
096
010
Merkel
SR1 Automatic
117
Parker Hale
Safari 1200
Remington
700 7400, 7600
seven
Sauer
80, 90, 92 200
202
STR
015
059
080
106
Drop barrel rifle
501
Savage
110, 116 Kojac
016
Krieghoff
Optima, Plus, Classic
511
Schultz & Larssen M 97
104
Steyr
Classic SBS L
M
SL, L-Jagdmatch
Ultra Light
Scout
Luxus (new)
089
093
086
018
111
112
127
Merkel
141
SL I and SL II
506
512
Sabatti/Humbert
Drop barrel rifle
504
Suhl
Drilling
510
Verney Carron
Sagittaire
508
Swiss Arms
SHR 970 109
Tikka
55, 65, 558, 658 590, 690
Master
T 3
031
043
038
107
Verney Carron
Auto Impact Bolt action rifle
066
019
Voere
2165 Kufstein Titan II
2185 Automat
021
045
083
Weatherby
Mark V,
300, Vanguard 023
011
Winchester
70
70 Model .223/.243 WSSM
024
114
012
013
078
Zastava
Mini Mauser
70
008
049
09
7
Bases for lock up.
For pivot mounts/
Drop barrel guns.
Bases for lock up.
For pivot mounts.
Bolt action rifle
Model
Bestell-Nr.
RWS/Rössler
Titan 6
1480-0108
Antonio Zoli
1900
1480-0067
Sabatti
Rover 1480-0075
Benelli
ARGO 1480-0003
Brno
Fox, CZ 527, ZKB 680 ZKK 600, CZ 550
CZ 531
1480-0041
1480-0047
1480-0065
Sako
Forester, Finnbear,
Finnwolf 75
1480-0053
1480-0054
Santa Barbara
Bolt action rifle
1480-0044
Carl Gustav
1896, 1900 2000, 3000
4000
1480-0005
1480-0095
1480-0037
FN Browning
A-Bolt, Eurobolt BAR I, BAR II, CBL, Acera
BLR, CLR
European
Browning Mauser
X-Bolt
1480-0002
1480-0003
1480-0057
1480-0056
1480-0004
1480-0128
Sauer
80, 90, 92 200
202
STR
1480-0015
1480-0059
1480-0080
1480-0106
Savage
110, 116 Kojac
1480-0016
Schultz & Larssen
M 97
1480-0104
Steyr
Classic SBS L
M
SL, L-Jagdmatch
Ultra Light
Scout
1480-0089
1480-0093
1480-0086
1480-0018
1480-0111
1480-0112
Swiss Arms
SHR 970
1480-0109
Tikka
55, 65, 558, 658 590, 690
Master
T 3
1480-0031
1480-0043
1480-0038
1480-0107
Verney Carron
Automat Bolt action rifle
1480-0066
1480-0019
Voere
2165 Kufstein Titan II
2185 Automat
1480-0021
1480-0045
1480-0083
Weatherby
Mark V, 300, Vanguard 1480-0023
Heckler & Koch
SLB 2000
1480-0058
Heym
SR 20 SR 21
SR 30
1480-0060
1480-0039
1480-0099
Kongsberg
M 389
1480-0061
Krico
600, 700, 900, 902
1480-0006
Krieghoff
Semprio
1480-0118
Lakelander
M 389
1480-0071
Mauser
225 Titan II 66
94, 96 > Nr. 96011999
94, 96 Nr. 96012000 >
K 98
1480-0035
1480-0009
1480-0094
1480-0096
1480-0010
Merkel
SR1
1480-0117
Parker Hale
Safari 1200
1480-0011
Winchester
70
1480-0024
70 Modell .223/.243 WSSM 1480-0114
Remington
700 7400, 7600
seven
1480-0012
1480-0013
1480-0078
Zastava
Mini Mauser
70
1480-0008
1480-0049
09
Order-No. 1490-1800
Base for lock up,
with prism 15 mm width,
22 mm length, Height: 2,5 mm,
prepared to be installed with dovetail 70°.
Order-No.
1490-2200
Base for lock up,
with prism 15 mm width,
27 mm length,
to be soldered in the rib of a superposed gun.
Order-No. 1490-2500
Base for lock up,
with prism 15 mm width,
27 mm length,
for installation in the rib of a sxs type gun.
Drop barrel guns
8
Base for lock up,
with prism 15 mm width,
18 mm length, Height: 2,5 mm,
prepared to be installed in the rib.
Model
Bestell-Nr.
Antonio Zoli
Drop barrel rifle 1480-0505
B. Rizzini
Drop barrel rifle 1480-0502
Chapuis
O/U Express
S/S Express
1480-0500
1480-0503
F.A.I.R techni-mec Drop barrel rifle 1480-0501
Krieghoff
Optima, Plus, Classic
1480-0511
Sabatti/Humbert
Drop barrel rifle
1480-0504
Suhl
Drilling
1480-0510
Verney Carron
Sagittaire
1480-0508
Order-No.
1490-2550
Locks and height spacers.
For pivot mounts.
Usage
BH (Height, mm)
Order-No. 12 mm prism
8,0 1400-1208
14 mm Krieghoff prism
8,0 1400-1408
15 mm prism
8,0 1400-1508
15 mm prism
BH (Height, mm)
Order-No.
8,0 1450-1508
Adapter for EAW rearbase
Usage
Compatible with all MAK
pivot mounts and
EAW rear base BH (Height, mm)
4,0 Order-No.
1410-0000
Adapter for original Steyr-Base for lock up
Usage
Compatible with all MAK
pivot mounts and
Steyr-Base for lock up Verwendung
Compatible with all MAK
pivot mounts and
Merkel SL I- and SL II-Base for lock up BH (Height, mm)
7,0 Order-No.
1440-1507
BH (Height, mm)
Order-No.
7,5 1420-0807
Intelligent
Windae adjustment
Height spacers
with excenter
Lever lock with safety
Usage
Adapter for original Merkel SL I- and
SL II-Base for lock up
BH (Height, mm)
Order-No.
0,5 1440-0005
1,0
1440-0010
1,5 1440-0015
2,0 1440-0020
2,5
1440-0025
3,0
1440-0030
3,5
1440-0035
4,0
1440-0040
4,5
1440-0045
5,0
1440-0050
5,5
1440-0055
6,0
1440-0060
6,5
7,0
1440-0065
1440-0070
7,5 1440-0075
8,0
1440-0080
8,5
1440-0085
9,0
1440-0090
9,5
1440-0095
10,0
1440-0100
10,5
1440-0105
11,0
1440-0110
11,5
1440-0115
12,0
1440-0120
15,0
1440-0150
20,0
1440-0200
BH
Rotation lock
The windage adjustment for the pivot
mounts are made through an excentric of
0,6 mm.
09
9
Rear rings, rear rail, complete rear feet. For two piece pivot mounts.
Rear ring in steel,
Rear foot,
with Hebelverschluß, for prism 15 mm width,
for zweiteilige Schwenkmontage
for two piece pivot mounts, Height 2,0 mm.
Ø 1”/26 mm
Ring BH 2,0 mm
Height spacer BH 12,0 mm
Lever lock BH 8,0 mm
BH 2,0 mm
Ø 1“ / 26 mm
Order-No. 1558-2600
Ø 30 mm
Order-No. 1558-3000
Ø 34 mm
Order-No. 1558-3400
Exterior rail BH 2,0 mm
Height spacer BH 12,0 mm
Lever lock BH 8,0 mm
Zeiss ZM/VM rail BH 3,0 mm
Height spacer BH 12,0 mm
Lever lock BH 8,0 mm
Swarovski SR rail BH 2,0 mm
Height spacer BH 12,0 mm
Lever lock BH 8,0 mm
Order-No. 1460-2602
Ø 30 mm
BH 2,0 mm
Order-No. 1460-3002
Ø 34 mm
BH 2,0 mm Order-No. 1460-3402
Order-No. 1558-4000
Rear rail
Order-No. 1558-4500
for two piece pivot mounts
Exterior rail
BH 2,0 mm
Order-No. 1460-4002
Order-No. 1558-6000
Zeiss ZM/VM rail
Schmidt & Bender rail BH 2,0 mm
Height spacer BH 12,0 mm
Lever lock BH 8,0 mm
BH 3,0 mm
Order-No. 1558-7000
Order-No. 1460-4503
Swarovski SR rail
BH 2,0 mm
Order-No. 1460-6002
Schmidt & Bender rail
Rear foot,
BH 2,0 mm
Order-No. 1460-7002
with Rotation lock, for prism 15 mm width,
for pivot mount in two pieces
Ring BH 2,0 mm
Height spacer BH 12,0 mm
Rotation lock BH 8,0 mm
Ø 1“ / 26 mm
Order-No. 1458-2600
Ø 30 mm
Order-No. 1458-3000
Ø 34 mm
Order-No.1458-3400
Exterior rail BH 2,0 mm
Height spacer BH 12,0 mm
Rotation lock BH 8,0 mm
Order-No. 1458-4000
Zeiss ZM/VM rail BH 3,0 mm
Height spacer BH 12,0 mm
Rotation lock BH 8,0 mm
Swarovski SR rail BH 2,0 mm
Height spacer BH 12,0 mm
Rotation lock BH 8,0 mm
Schmidt & Bender rail BH 2,0 mm
Height spacer BH 12,0 mm
Rotation lock BH 8,0 mm
10
09
Front bases. For pivot mounts.
Bolt action rifle
Order-No. 1458-4500
Order-No. 1458-6000
Order-No. 1458-7000
Model
Order-No.
Antonio Zoli
1900
1680-0067
Benelli
Argo 1680-0003
Brno
Fox, CZ 527, ZKB 680 ZKK 600, CZ 550
CZ 531
1680-0041
1680-0047
1680-0065
Carl Gustav
1896, 1900 2000, 3000
4000
1680-0005
1680-0095
1680-0037
FN Browning
A-Bolt, Eurobolt BAR I, BAR II, CBL, Acera
BLR, CLR
European
Browning Mauser
X-Bolt
1680-0002
1680-0003
1680-0057
1680-0056
1680-0004
1680-0128
Drop barrel guns
Heckler & Koch
SLB 2000
Heym
Model
Order-No.
Antonio Zoli
Drop barrel rifle
1680-0505
Beretta
Silver Sable
1680-0513
1680-0058
B. Rizzini
Drop barrel rifle
1680-0502
SR 20 SR 21
SR 21 Model 2004
SR 30
SR 30 Model 2004
1680-0060
1680-0039
1680-0139
1680-0099
1680-0199
Browning
525 Express
1680-0507
Chapuis
O/U Express Superposé
S/S Express Juxtaposé
1680-0500
1680-0503
F.A.I.R techni-mec
Drop barrel rifle
1680-0501
Kongsberg
M 389
1680-0061
Krieghoff
Optima, Plus, Classic
1680-0511
Krico
600, 700, 900, 902
1680-0006
Merkel
141
1680-0506
Krieghoff
Semprio
1680-0118
Sabatti/Humbert
Drop barrel rifle
1680-0504
Drilling
1680-0510
Sagittaire
1680-0508
Lakelander
M 389
1680-0071
Suhl
Mauser
225 Titan II 66, 66S, 66 SM
94, 96 Nr. <96011999
94, 96 Nr. >96012000 K 98
1680-0035
1680-0009
1680-0094
1680-0096
1680-0010
Verney Carron
Merkel
SR1
1680-0117
Parker Hale
Safari 1200
1680-0011
Remington
700 7400, 7600
seven
1680-0012
1680-0013
1680-0078
RWS/Rössler
Titan 6
1680-0108
Sabatti
Rover 1680-0075
Sako
Forester, Finnbear, Finnwolf 75
1680-0053
1680-0054
Santa Barbara
Bolt action rifle
1680-0044
Sauer
80, 90, 92 200
202
STR
1680-0015
1680-0059
1680-0080
1680-0106
Front base, for pivot mount,
to be installed in the rib, available in the heights 5,0 mm (bottom open)
and 6,0 mm (bottom closed) for rib width of 12 mm
Savage
110, 116 Kojac
1680-0016
BH 5,0 mm
Order-No. 1690-1205
Schultz & Larssen
M 97
1680-0104
BH 6,0 mm
Order-No. 1690-1206
Steyr
Classic SBS L
M
SL, L-Jagdmatch
Ultra Light
Scout
1680-0089
1680-0093
1680-0086
1680-0018
1680-0111
1680-0112
Swiss Arms
SHR 970
1680-0109
Tikka
55, 65, 558, 658 590, 690
Master
T 3
1680-0031
1680-0043
1680-0038
1680-0107
Verney Carron
Auto Impact
Repetierer 1680-0066
1680-0019
Voere
2165 Kufstein Titan II
2185 Automat
1680-0021
1680-0045
1680-0083
Weatherby
Mark V, 300, Vanguard 1680-0023
Front base, for pivot mount, which is used to
replace a front base of a claw mount, available in the heights
5,0 mm (bottom open) and 6,0 mm (bottom closed)
Winchester
70
70 Model .223/.243 WSSM
1680-0024
1680-0114
BH 5,0 mm
Order-No. 1690-2205
Zastava
Mini Mauser
70
1680-0008
1680-0049
BH 6,0 mm
Order-No. 1690-2206
Front bases.
For pivot mounts/Drop barrel guns.
Front base, for pivot mount,
to be installed in the rib, available in the heights 5,0 mm (bottom open)
and 6,0 mm (bottom closed) for rib width of 14 mm
BH 5,0 mm Order-No. 1690-1405
BH 6,0 mm
Order-No. 1690-1406
09
11
Front feet. For two piece pivot mounts.
Front foot, Ø 1”/26 mm,
Front foot, Ø 30 mm,
with adjustment for vertical ­tolerances, width of ring: 15 mm
with adjustment for vertical t­ olerances, width of ring: 15 mm
Offset (KR) 0 mm
BH 12,0 mm
Offset (KR) 0 mm
Order-No. 1630-2620
Offset (KR) 26 mm
BH 12,0 mm
Order-No. 1630-3020
Offset (KR) 26 mm
BH 9,0 mm
Order-No. 1630-2602
BH 9,0 mm
Order-No. 1630-3002
BH 12,0 mm
Order-No. 1630-2622
BH 12,0 mm
Order-No. 1630-3022
Offset (KR) 34 mm
Offset (KR) 34 mm
BH 9,0 mm
Order-No. 1630-2604
BH 9,0 mm
Order-No. 1630-3004
BH 12,0 mm
Order-No. 1630-2624
BH 12,0 mm
Order-No. 1630-3024
Offset (KR) 49 mm
BH 12,0 mm Offset (KR) 49 mm
Order-No. 1630-2626
BH 12,0 mm
Order-No. 1630-3026
Front foot, Ø 34 mm,
with adjustment for vertical t­ olerances, width of ring: 15 mm
Offset (KR) 26 mm
BH 12,0 mm
Order-No. 1630-3422
BH 17,0 mm
Order-No. 1630-3462
Offset (KR) 34 mm
BH 12,0 mm Order-No. 1630-3424
BH 17,0 mm
Order-No. 1630-3464
Offset (KR) 49 mm
12
09
BH 12,0 mm Order-No. 1630-3426
BH 17,0 mm
Order-No. 1630-3466
Front foot, Exterior rail,
Front foot, Swarovski SR rail,
with adjustment for vertical ­tolerances, width of rail: 22 mm
with adjustment for vertical t­ olerances
Offset (KR) 0 mm
Offset (KR) 0 mm
BH 12,0 mm
Order-No. 1630-4020
Offset (KR) 26 mm
BH 12 mm
Order-No. 1630-6020
Offset (KR) 34 mm
BH 9,0 mm
Order-No. 1630-4002
BH 9 mm
Order-No. 1630-6004
BH 12,0 mm
Order-No. 1630-4022
BH 12 mm
Order-No. 1630-6024
Offset (KR) 34 mm
Offset (KR) 49 mm
BH 9,0 mm
Order-No. 1630-4004
BH 12,0 mm
Order-No. 1630-4024
BH 12 mm Order-No. 1630-6026
Offset (KR) 49 mm
BH 12,0 mm
Order-No. 1630-4026
Front foot, Zeiss ZM/VM rail,
Front foot, Schmidt & Bender rail,
with adjustment for vertical ­tolerances, width of rail: 35 mm
with adjustment for vertical t­ olerances, width of rail: 35 mm
Offset (KR) 0 mm
BH 13,5 mm
Offset (KR) 0 mm
Order-No. 1630-4540
Offset (KR) 34 mm
BH 12 mm
Order-No. 1630-7020
Offset (KR) 34 mm
BH 10,5 mm
Order-No. 1630-4514
BH 9 mm
Order-No. 1630-7004
BH 13,5 mm
Order-No. 1630-4544
BH 12 mm
Order-No. 1630-7024
Offset (KR) 49 mm
BH 13,5 mm
Offset (KR) 49 mm
Order-No. 1630-4546
BH 12 mm
Order-No. 1630-7026
09
13
Flexible
14
09
09
15
T his mount can be installed on every type of rifle,
either bolt action, or drop barrel.
T he distance between the pivot and the lock is
completely adjustable, because the complete rear
foot can be slided front and aft by loosening one
screw , which is very practical and revolutionary.
T he height on the height spacers can also be adjusted with a modular system for the the height
spacer, which is also very elegant, practical, and
revolutionary. (The height spacer is divided into
smaller height steps, by means of this system we
can change height without any machine work).
Without tension, for everything is adjustable.
Extremely stable, and recoil proof for all calibers.
T he scope can be detached very easily and swiftly,
without any tools.
A large bearing area on the pivot and the lockup.
o impact change after taking the scope off, and
N
putting it back on.
T he ideal mount for a second scope on the same
rifle, or the same scope on multiple rifles.
A very elegant, and stable mount.
16
09
MAKflex mount.
With rotation lock or lever lock. For Bolt action rifle and Drop barrel guns.
2000-4500
Order example 20…:
MAKflex mount with Rotation lock / for Zeiss ZM/VM prism
MAKflex mount with Rotation lock
21
For EAW
22
For Merkel
23
For Leupold Quick Release Bases
24
For original Steyr
25
MAKflex mount with Lever lock
Scope
Maintube Ø
1” / 26 mm
Maintube Ø
30 mm
26
30
Order-No. Please notice:
Our Flex-Bridgemount is supplied
without front and rear base.
Maintube Ø
34 mm
34
Exterior rail
Zeiss
ZM/VM rail
Weaver-Prisma
Swarovski
SR rail
Schmidt&Bender
rail
40
45
50
60
70
Please see for the fitting parts:
Front bases – page 11
Rear bases – page 8
Pivots with extension – page19
Lower and higher pivots – page 19
Rings with different heights – page 19
09
17
Bridge mount.
With rotation- or Lever lock.
For Drop barrel guns.
Parts.
For MAKflex-, Bridge- and
MAKuick Quick Release-Mounts.
Especially for Blaser single shot K 77, with Rotation lock
(distance between pivot and lockup 73 mm).
This mount is supplied without front or rear bases.
Also available with lever lock, order no. 2784-....
Ø 1“/26 mm, BH 20,5 mm
Order-No. 2284-2600
Ø 30 mm, BH 20,5 mm
Order-No. 2284-3000
Ø 34 mm, BH 20,5 mm
Order-No. 2284-3400
Exterior rail, BH 16,5 mm
Order-No. 2284-4000
Zeiss ZM/VM rail, BH 14,5 mm
Order-No. 2284-4500
For drop barrel guns in general
This mount is supplied without front or rear bases.
Also available with lever lock, order no. 2784-....
Ø 1“/26 mm, BH 20,5 mm
Order-No. 2284-2699
Ø 30 mm, BH 20,5 mm
Order-No. 2284-3099
Ø 34 mm, BH 20,5 mm
Order-No. 2284-3499
18
09
Aluminium ring
MAKflex-Adapter for EAW rear base
Ø 1“ / 26 mm
BH 4,0 mm
BH 2,5 mm
Order-No. 2460-2602
BH 5,0 mm
Order-No. 2460-2605
BH 10,0 mm
Order-No. 2460-2610
Order-No. 1410-0000
MAKflex-Adapter for original Steyr rear base
Ø 30 mm
BH 2,5 mm
Order-No. 2460-3002
BH 5,0 mm
Order-No. 2460-3005
BH 10,0 mm
Order-No. 2460-3010
BH 7,0 mm
Order-No. 1440-0807
Ø 34 mm
BH 2,5 mm
Order-No. 2460-3402
BH 11,0 mm
Order-No. 2460-3411
Adapter for original Merkel SL I- and SL II rear base
BH 7,5 mm
Order-No. 1420-1507
These can also be
fitted directly to the
MAK-Milmont (Seite 31)
Pivots
BH 2,0 mm
Order-No. 2000-0002
BH 4,0 mm (standard)
Order-No. 2000-0004
BH 6,0 mm
Order-No. 2000-0006
Pivots with extension
Dedal-/STANAG-Adapter
Offset (KR) 24 mm, BH 4,0 mm
Order-No. 2000-2440
For the model with radius
Order-No. 2460-0020
Offset (KR) 39 mm, BH 4,0 mm (standard)
Order-No. 2000-3940
For the model with ZM rail
Order-No. 2460-0040
For the model with STANAG rail
Order-No. 2460-0030
COT-Adapter
Order-No. 2460-0080
Yukon-Adapter
Order-No. 2460-0090
Pivots for original Steyr
BH 4,0 mm
Order-No. 2400-0004
09
19
Quick
T he latest generation of scope mounts for
– Drop barrel guns
– Bolt action rifle
– Semi-automatic rifles
– Blaser mount systems
– Merkel KR 1 systems
– Weaver/Picatinny rail
20
09
Easiest mounting and handling.
ntonio Zoli, Bettinsoli, Blaser, BRNO,
A
Browning, CZ, Finnclassic, Sabatti,
Merkel, Sako, Tikka are designed by
their manufacturers to receive this mount
automatically. ­
n exclusive model developed and ­
A
produced for ­Krieghoff.
ith simple and elegant adapterbases (see Page
W
27) this mount can also be installed on a whole
range of other popular rifles(Benelli Argo,
Browning BAR, Chapuis express, Heckler &
Koch etc.).
Precision milled from aircraft grade ­aluminium.
All working parts in hardened steel.
bsolutely recoil proof, and guaranteed
A
return to zero when taken off.
s with all MAK products exemplary
A
in design and function.
09
21
MAKuick quick release mount in one piece. For Bolt action rifle.
Order example 50…:
MAKuick quick release mount in one piece. For Bolt action rifle /
Height 2,5 mm / for 30 mm Maintube-Ø / for CZ 550
5072-30047
9
MAKuick quick release mount in one piece.
For Bolt action rifle
For Blaser R 93
6
For Merkel KR 1
Height Rings= BH
BH
Order-No.
2,5 mm
2
5 mm 4
10 mm 8
Scope
Maintube Ø 1” /
26 mm
Maintube Ø
30 mm
26
30
Order-No. Maintube Ø
34 mm
34
WKZ = ID number for rifle
Model
WKZ
Blaser R 93
193
CZ
527 550
041
047
Merkel
KR 1 162
Sauer
303 133
Sako
75 / 85
054
Tikka
T3 107
22
09
Exterior rail
Zeiss
ZM/VM rail
Weaver-Prisma
Swarovski
SR rail
Schmidt&Bender
rail
40
45
50
60
70
MAKuick quick release mount in one piece. For Drop barrel guns.
5022-3000
5
Order example 50…:
AKuick quick release mount in one piece. For Drop barrel guns /
M
for 12 mm Rail / Height 2,5 mm / for 30 mm Maintube-Ø
MAKuick quick release mount in one piece.
For Drop barrel guns
For 14/15 mm Rail
Height Rings= BH
BH
Order-No.
2,5 mm
2
5 mm 4
10 mm 8
Scope
Maintube Ø
1” / 26 mm
Maintube Ø
30 mm
26
30
Order-No. Maintube Ø
34 mm
34
Exterior rail
Zeiss
ZM/VM rail
Weaver-Prisma
Swarovski
SR rail
Schmidt&Bender
rail
40
45
50
60
70
MAKipp fixed mounts in one piece. For Drop barrel guns.
Example order51…:
5122-3000
MAKipp fixed mounts in one piece. For Drop barrel guns /
for 12 mm Rail / Height 2,5 mm / for 30 mm Maintube-Ø
MAKipp fixed mounts in one piece.
For Drop barrel guns
Height Rings= BH
BH
Order-No.
2,5 mm
2
5 mm 4
10 mm 8
Scope
Order-No. Maintube Ø
1” / 26 mm
Maintube Ø
30 mm
26
30
Maintube Ø
34 mm
34
Exterior rail
Zeiss
ZM/VM rail
40
45
09
23
24
09
MAKuick quick release mount in two pieces.
For bolt action rifle.
5252-30010
Order example 52…:
MAKuick quick release mount in two pieces. For bolt action rifle /
for 30 mm Maintube-Ø / for Mauser K 98
MAKuick quick release mount in two pieces. For Bolt action rifle
Scope
Order-No. Maintube Ø
1” / 26 mm
Maintube Ø
30 mm
Exterior rail
26
30
40
Zeiss
ZM/VM rail
45
Height (BH)
Ø 1“ / 26 mm and Ø 30 mm = 17 mm
WKZ = ID number for rifle
Model
WKZ
Krico
600, 700, 900, 902
006
Savage
Mauser
225 Titan II 94, 96 Nr. < 96011999
970 96 Nr. > 96012000 K 98
035
094
097
010
Schultz & Larssen M 97
104
Classic SBS M
SL, L-Jagdmatch
Scout
089
086
018
112
Antonio Zoli
1900
067
Benelli
ARGO
003
Carl Gustav
1896, 1900 2000, 3000
4000
005
095
037
FN Browning
A-Bolt, Eurobolt BAR I, BAR II, CBL, Acera
BLR, CLR
European
Browning Mauser
002
003
057
056
004
Heckler & Koch
SLB 2000
058
Heym
SR 20 SR 21
SR 30
060
039
099
110, 116 Kojac
016
Parker Hale
Safari 1200
011
Steyr
Remington
700 7400, 7600
012
013
Verney Carron
Auto Impact
Bolt action rifle
066
019
Sabatti
Rover 075
Santa Barbara
Bolt action rifle
044
Voere
2165 Kufstein Titan II
021
045
Sauer
80, 90, 92 200
202
015
059
080
Weatherby
Mark V, 300, Vanguard 023
Winchester
70
024
Zastava
Mini Mauser
70
008
049
09
25
Adapterrails – prism and Weaver/Picatinny.
26
09
NEW
Weaver rail
for semi-auto rifle and shotguns
Model
Order-No.
FN-BAR
5520-5003
Benelli Rafaello
5520-5121
Heckler & Koch SLB 2000
5520-5121
Merkel SR 1
5520-5058
Steyr SSG 69
5520-5069
An adapterbase thin as this
catalogue and only 12 mm wide…
That is all what is needed to fascilitate mounting
of our one piece QR-mounts. The adapterbase is
so thin and elegant that it does not block the open
sight at all.
Model
Order-No.
Benelli Argo
5520-0003
B. Rizzini
5520-0502
Chapuis O/U Express Superposé
5520-0500
Chapuis S/S Express Juxtaposé
5520-0503
F.A.I.R. techni-mec
5520-0501
FN-BAR
5520-0003
Heckler & Koch SLB 2000
5520-0058
Heckler & Koch SL 7
5520-0115
Marlin
5520-0120
Merkel SR 1
5520-0117
Remington 7400/7500/7600
5520-0013
Verney Carron Auto Impact
5520-0066
Zoli Drilling
5520-0200
NEW
Weaver adapter rail
for MAKuick quick release mount
and MAKflex
Model
Order-No.
Weaver/Picatinny rail
500 mm lang, with barrel support
2460-50500
Weaver/Picatinny rail
160 mm lang
2460-50160
09
27
Professional
For Weaver/Picatinny rails.
28
09
For Weaver / Picatinny rails. MAK have developed
a 2 piece ­system with the patended MAK QR technique. This system was originally developed for the
Steyr Mannlicher Ultra light Bolt action (SBS) rifle.
An interchangeable square steel recoil lug coupled
with proven MAK construction ­guarantees perfect
performance. This recoil lug can be used with either
weaver recoil slots and or picatinny recoil slots, to
guarantee 100% recoil proof , return to zero positioning.
09
29
MAKmilmont quick release mount in two pieces. For Weaver/Picatinny rail.
Order example 58…:
5850-3000
MAKmilmont quick release mount in two pieces /
Height 12 mm / for Ø 30 mm Maintube-Ø
MAKmilmont quick release mount in two pieces
For Weaver/Picatinny rail
Height Rings= BH
BH
Order-No.
12 mm
0
21 mm 6
Scope
Maintube Ø 1” /
26 mm
Maintube Ø
30 mm
Maintube Ø
34 mm
26
30
34
Order-No. 30
09
Exterior rail
40
Zeiss
ZM/VM rail
Swarovski
SR rail
45
60
MAKmilmont quick release mount in one piece. For Weaver/Picatinny rail.
For all straight Weaver / Picatinny rails. For military purposes a 1 piece version of the Weaver /
Picatinny QR was developed. The bridge like base can still be mounted on Steyr Ultra Light models
because the action length corresponds with the bridgelength of the mount. In the bridge 6 milled slots
can be used to mount all types of rings and rails all existing Ø and heights. In addition to this a special
DEDAL night vision adapter can be mounted in these slots to fascilitate mounting of DEDAL optics.
BH=14 mm Order-No. 5750-0000
BH=14 mm, fixed mount,
comes without locking lever, rings and adapter
Order-No. 5760-0000
MAKmilmont monoblock mount. For Weaver/Picatinny rail.
NEW
MAKmilmont Monoblockmontage is developed for tactical sniper rifle. It is the first choice of
the professionals when it counts. wurde im Zusammenhang with einem Behördenauftrag for
Scharfschützengewehre entwickelt. MAKmilmont monoblock mount is designed for scopes with
34 mm maintube. It has a 20-MOA slope for long range shooting applications.
BH=23 mm, 20-MOA slope
Order-No. 5760-3400
09
31
Stable
R ecoil proof, by means of a recoil lug milled in
the solid front ring.
Especially recommended when the rifle does not
have open sights.
Extremely stable.
A very elegant, proportioned mount.
very low mounted scope is possible with this
A
mount.
T his mount is easy to install, and therefore very
interesting price-wise.
32
09
vailable in several heights between scope and
A
action, from 11,0 mm to 20,0 mm
vailable with offset on the front foot to fascilitate
A
mounting the newer, shorter scopes.
MAKfix fixed mount in two pieces. For Bolt action rifle.
4000-30089
Order example 40…:
MAKfix fixed mount in two pieces. For Bolt action rifle /
Height 11,0 mm / straight / for maintube Ø 30 mm / for Steyr Classic SBS
MAKfix fixed mount in two pieces.
For Bolt action rifle
Height = BH
BH
Offset of
front foot = KR
Order-No.
11 mm
0
14 mm 1
17 mm
2
20 mm
5
KR
BH
Order-No.
0 mm
0
34 mm 4
Please notice:
Offset starting with BH 17 mm
KR
Scope
Maintube Ø
1” / 26 mm
Maintube Ø
30 mm
Order-No. 26
30
WKZ = ID number for rifle
Steyr
Classic SBS L
M
SL, L-Jagdmatch
Ultra Light
Scout
089
093
086
018
111
112
Swiss Arms
SHR 970 109
Tikka
55, 65, 558, 658 590, 690
Master
T 3
031
043
038
107
075
Verney Carron
Auto Impact Bolt action rifle
066
019
Forester, Finnbear,
Finnwolf 75
053
054
Voere
2165 Kufstein Titan II
2185 Automat
021
045
083
Santa Barbara
Bolt action rifle
044
80, 90, 92 200
202
STR
015
059
080
106
Weatherby
Mark V, 300,
Vanguard 023
001
Sauer
Winchester
70
70 Model .223/.243 WSSM
024
114
061
Savage
110, 116 Kojac
016
Zastava
Mini Mauser
70
008
049
Schultz & Larssen M 97
104
Model
WKZ
Krico
600, 700, 900, 902
006
Antonio Zoli
1900
067
Lakelander
M 389
071
Benelli
Argo 003
Brno
Fox, CZ 527, ZKB 680 ZKK 600, CZ 550
CZ 531
041
047
065
Carl Gustav
1896, 1900 2000, 3000
4000
005
095
037
Mauser
225 Titan II 66, 66 S, 66 SM
94, 96 Nr. < 96011999
94, 96 Nr. > 96012000 K 98
035
009
094
096
010
Parker Hale
Safari 1200
011
FN Browning
A-Bolt, Eurobolt BAR I, BAR II, CBL, Acera
BLR, CLR
European
Browning Mauser
X-Bolt
002
003
057
056
004
128
Remington
700 7400, 7600
seven
012
013
078
Sabatti
Rover Sako
Heckler & Koch
SLB 2000
058
Heym
SR 20 SR 21
SR 30
060
039
099
Kleinkaliber
11 mm Prisma Kongsberg
M 389
09
33
Innovative
34
09
09
35
Extremely stable
Extremely flexiblel
Extremely low
Extremely simple
to mount
1
2
3
1. vertical adjustment (pivot tension) through
adjustable pivot
2. Horizontal adjustment (shot direction) through
adjustable lug
3. Lockup by pivot rotation
MAKnetic – red dot mount for bolt action rifle
for DOCTER Sight* and Blaser R 93
Order-No. 3092-9000
for Aimpoint Micro and Blaser R 93
Order-No. 3092-1000
for DOCTER Sight* and Merkel KR 1
Order-No. 3062-9000
for Aimpoint Micro and Merkel KR 1
Order-No. 3062-1000
MAKlick – the red dot mount for the front bases
of pivot mounts any brand
for DOCTER-Sight*
Order-No. 3000-9000
with adapter for Aimpoint Micro
Order-No. 3000-1000
with adapter for Aimpoint Comp
Order-No. 3000-3000
with adapter for Z-Point
Order-No. 3000-5000
MAKnetic – red dot mount for shotguns
Adapter for MAKlick
Ring for Aimpoint Comp
Order-No. 3300-3000
Weaver adapter for MAKlick
Order-No. 3500-5000
* DOCTER Sight base fits also for Burris FastFire and Meosight
36
09
for DOCTER Sight* and 6 mm rail
Order-No. 3006-9000
for DOCTER Sight* and 8 mm rail
Order-No. 3008-9000
for DOCTER Sight* and 10 mm rail
Order-No. 3010-9000
for DOCTER Sight* and 12 mm rail
Order-No. 3012-9000
for DOCTER Sight* and 14 mm rail
Order-No. 3014-9000
for Aimpoint Micro and 10 mm rail
Order-No. 3010-1000
for Aimpoint Micro and 12 mm rail
Order-No. 3012-1000
for Aimpoint Micro and 14 mm rail
Order-No. 3014-1000
MAK-Skand-Ring directly fits on
Zoli, Sabatti, Bettinsoli, Finnclassic ...
Milled from steel
MAKugel –
DOCTER Sight* mount for Picatinny/Weaver rail
Order-No.
MAK-Skand-Ring.
Ø 30 mm (BH=5 mm) steel
5650-9000
Order-No. 5612-3005
MAKugel is the latest MAK product for mounting DOCTER Sight on weaver/picatinny rails with
absolute stability and return to zero after take off. This is guaranteed by the most complete form
known to man: the sphere!
AK-Skand-Ring. For the 12mm wide prism rail/rib an ultra low Ø30mm fixed ring with
M
interchangeable steel recoil lug was developed by MAK. This ring can be mounted directly on all
drop-barrel design guns with 12mm wide prism rib with or without recoil slot. (Zoli, Sabatti,
Bettinsoli, Finnclassic etc). As well as on all 12mm wide prism that are most often seen on popular
.22 LR rifles. The 5mm height of construction coupled with the steel recoil lug make for ultra low,
stable mounting of Ø30mm optics on this type of rail.
Adapter for red dot sights and
Leupold QR-Basen
DOCTER Sight* mount
for dovetail prism
for DOCTER Sight* and Leupold QR-Basen
Order-No. 2330-9000
12 mm dovetail prism
Order-No. 5612-9000
for Aimpoint Micro and Leupold QR-Basen
Order-No. 2330-1000
14/15 mm dovetail prism
Order-No. 5614-9000
09
37
Technical
Mauser K 98 action.
Accessoires for hunting guns.
Extended tang
for mauser K 98 and magnum Mauser
Order-No. Extended trigger guard
Original Mauser K 98 action
Order-No. 38
5900-9050
09
5900-9092
for mauser K 98 and magnum Mauser
Order-No.
5900-9094
Trapdoor cartridge reserves, butt plates, trigger guards.
Trapdoor cartridge reserve
steel, ready to be engraved,
with finger grip,
for 3 rounds.
Trigger guard
Forend tip blanks
made from buffalo horn,
polished and ready to be installed
from ebony.
Order-No. 8600-0500
Order-No. 8400-2000
Order-No. 8800-0000
Pistol grip caps.
Pistol grip cap
Pistol grip cap
P­ istol grip cap, in round form, steel,
ready for engraving, dimensioned 46x34 mm
Pistol grip cap, in flat form, steel,
ready for e­ ngraving, dimensioned 46x34 mm
not predrilled
Order-No. 8300-0000
not predrilled
Order-No. 8300-5000
with one hole
Order-No. 8300-0100
with one hole
Order-No. 8300-5100
with two holes
Order-No. 8300-0200
with two holes
Order-No. 8300-5200
Ste trigger, trigger.
Set trigger, for Carl Gustav
Set trigger, for magnum mauser
all parts milled out of bar steel, working parts hardened and
polished, everything is adjustable, reset ­feature for the set trigger
function, can be ­installed on the complete unit.
all parts milled out of bar steel, working parts hardened and
polished, everything is adjustable, reset ­feature for the set trigger
function, can be i­nstalled on the complete unit.
(trigger is 5 mm longer), all parts milled out of bar steel, working
parts hardened and polished, everything is adjustable, reset feature
for the set trigger function, can be installed on the ­complete unit.
gold washed trigger
Order-No. 5000-0000
gold washed trigger
Order-No. 5000-1000
gold washed trigger
Order-No. 5000-2000
Order-No. 5000-0500
white trigger polished
Order-No. 5000-1500
white trigger polished
Order-No. 5000-2500
Set trigger, for mauser K-98 ­
white trigger polished
09
39
Valuable
If you want to customize your Blaser R 93 MAK can
offer you a whole range of ­options and possibilities. From Bolt knobs in colour case hardened steel
by St. Ledger, to sideplates ready for your custom
engraving, to exhibition grade wood.
40
09
Since we have one of the biggest stock blank
layers in Europe we can surely help you when
you are looking for that once of a lifetime blank
which we can than transform into a Blaser R 93
stock and forend of your choice. Please call us
to make an appointment for selection of your
custom parts.
The dream of Blaser R 93 – affordable.
Bolt knob
from steel, ready to be engraved
Order-No. 9220-0012
Side plates
Pistol grip cap
from steel, ready to be engraved
Order-No. made for Blaser R 93 stock
and for MAK-Stock.
9220-0022
Order-No.
9221-0032
Bolt knob
from steel, colour case hardened,
­colour case h­ ardening by Ray St. Ledger, ­UK
Order-No. 9220-0013
Side plates
from steel, colour case hardened,
­colour case h­ ardening by Ray St. Ledger, U­ K
Bolt knob
Order-No. from Turkish walnut ­
Order-No. 9220-0023
Pistol grip cap
steel coulour case hardened by Ray St. Ledger England,
made for Blaser R 93 stock.
9220-0010
Order-No.
Side plates
Bolt knob
from Turkish walnut
from Buffalo horn
Order-No. 9221-0033
9220-0015
Order-No. 9220-0020
Ready to mount stocks for Blaser R 93
09
41
Color case hardening exclusively by Ray St. Ledger.
We are very proud to announce our ­exclusive
arrangement with Ray St. Ledger and Sons;
Birmingham, England. They are recognized worldwide
by fine gun makers as the leading experts in colour
case hardening. Our Blaser R 93 Specialty Products
are marked „Colour Case Hardened by Ray St. Ledger;
Birmingham, England“.
42
09
Interested craftsmen can also contract for other
Ray St. Ledger and Sons ­products and services.
Contact Kilic Feintechnik GmbH in Germany for
more Information or a Quotation ­today.
You will be glad you did!
Sample form, to be filled in, send by fax to no.:
Order
+49-(0)9722-7748
We order accepting your sales and
payment conditions:
Quantity
Order No. Company
Product description
Contact person
Street, No.
Postal code, city Country
Telephone Fax
Company stamp, date, signature