docSOCO SYSTEM - Goliath Packaging Systems
download 
Report Transcription
SOCO SYSTEM - Goliath Packaging Systems
SOCO SYSTEM ■ Erecting ■ Packing ■ Conveying ■ Sealing ■ Pallet Handling ■ Palletising ■ Pallet Securing www.socosystem.com Content Conveying Driven conveyors Drive section for driven roller conveyors Page 1 With Ø 48 plastic rollers. Coupled section for driven roller conveyors Page 3 With Ø 48 plastic rollers. Driven curves Curves with conical rollers 90° Page 5 With two drives for high loadings. Belt conveyors Belt conveyors with roller bedding Page 6 Belt conveyors with plate bedding Page 9 Smooth belts for belt conveyors Page 12 Grip belts for belt conveyors Page 15 Belt conveyors with triplex angles Page 18 Suitable for transport of items that are not suited for sudden transition from inclined to horizontal transport. Belt conveyors with booster Page 19 For gentle transport - up or down. Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Modules Content Belt for belt conveyor with booster Page 21 T-55 Automatic adjustment for case size - Top and bottom closure Page 22 T-602 Fully automatic - Top and bottom closure Page 24 Case sealing 3/12/2007 Copyright SOCO SYSTEM A/S Case sealers for random case sizes Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com Modules Driven conveyors Drive section for driven roller conveyors With Ø 48 plastic rollers. The conveyors are used, for instance, where conveyors operate at right angles or where items are pushed from one conveyor to another. Examples of ordering Choose a drive section in the table. Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long. Then choose a coupled section of a length which together with the drive section provides the desired total length. Example 1: 1.5 m driven roller conveyor with 60 mm pitch and, 400 mm width. 1-off item no.: 450760743. Example 2: 3 m driven roller conveyor with pitch 60 mm, width 400 mm. 1 off item no.: 450760744. 1 off item no.: 450761742. Example 3: 6 m driven roller conveyor with pitch 60 mm, width 400 mm. 1 off item no.: 450762744. 1 off item no.: 450761744. ■ The conveyors are silent with smooth frames and no sharp edges. ■ Minimum danger of injury - the drive axle is sealed off. Specifications Tubes Axles End bearings Drive unit Gear Drive Frames Axle pitch Width Ø 48 mm impact-proof plastic. Ø 8 mm aluminium. Plastic insert with stainless steel balls. 0.10 kW or 0.37 kW. Standard 20:1 = 10 m/min. Other gearings available. A frequency control system can be connected directly to the 3phase motor. With polycord belts from coupled axle to each roller. Electro-galvanised steel. 60 or 90 mm. 300, 400, 500, 600 mm. Length Total length Load 500, 750, 1000, 1500, 2000, 2500, 3000 mm. Max. 10-12 m depending on the load. 10 kg per roller or max. 75 kg per metre conveyor. Subject to alteration. Item numbers Length* Under 4 m Axle pitch 60/ item no. Under 4 m Axle pitch 90/ item no. 300 500 750 1000 1500 2000 2500 3000 450760731 450760735 450760732 450760733 450760734 450760736 450760737 450763731 450763735 450763732 450763733 450763734 450763736 450763737 Over 4 m Axle pitch 60/item Over 4 m Axle pitch 90/ no. item no. 450762734 3/12/2007 Copyright SOCO SYSTEM A/S Width 450765734 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 1 Modules Width Length* Under 4 m Axle pitch 60/ item no. Under 4 m Axle pitch 90/ item no. 400 500 750 1000 1500 2000 2500 3000 450760741 450760745 450760742 450760743 450760744 450760746 450760747 450763741 450763745 450763742 450763743 450763744 450763746 450763747 500 750 1000 1500 2000 2500 3000 450760751 450760755 450760752 450760753 450760754 450760756 450760757 450763751 450763755 450763752 450763753 450763754 450763756 450763757 500 750 1000 1500 2000 2500 3000 450760761 450760765 450760762 450760763 450760764 450760766 450760767 450763761 450763765 450763762 450763763 450763764 450763766 450763767 500 600 Over 4 m Axle pitch 60/item Over 4 m Axle pitch 90/ no. item no. 450762744 450765744 450762754 450765754 450762764 450765764 *Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long. All measurements are in mm. Subject to alteration. Accessories Supports for belt conveyors and driven roller conveyors 3/12/2007 Copyright SOCO SYSTEM A/S Coupled section for driven roller conveyors Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 2 Modules Driven conveyors Coupled section for driven roller conveyors With Ø 48 plastic rollers. Coupled sections are used together with drive sections. Example of ordering Choose drive section. Please note that for total lengths exceeding 4 m, the drive section must always be 2 m long. Then choose a coupled section of a length which together with the drive section provides the desired total length. Specifications Tubes Axles End bearings Drive Frames Axle pitch Width Length Total length Load Ø 48 mm impact-proof plastic. Ø 8 mm aluminium. Plastic insert with stainless steel balls. With polycord belts from coupled axle to each roller. Electro-galvanised steel. 60 or 90 mm. 300, 400, 500, 600 mm. 500, 750, 1000, 1500, 2000, 2500, 3000 mm. Max. 10-12 m depending on the load. 10 kg per roller or max. 75 kg per metre conveyor. Subject to alteration. Width Length Axle pitch 60/item no. Axle pitch 90/item no. 300 500 750 1000 1500 2000 2500 3000 450761731 450761735 450761732 450761733 450761734 450761736 450761737 450764731 450764735 450764732 450764733 450764734 450764736 450764737 400 500 750 1000 1500 2000 2500 3000 450761741 450761745 450761742 450761743 450761744 450761746 450761747 450764741 450764745 450764742 450764743 450764744 450764746 450764747 500 500 750 1000 1500 2000 2500 3000 450761751 450761755 450761752 450761753 450761754 450761756 450761757 450764751 450764755 450764752 450764753 450764754 450764756 450764757 600 500 750 1000 1500 2000 450761761 450761765 450761762 450761763 450761764 450764761 450764765 450764762 450764763 450764764 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Item numbers 3 Modules Width Length Axle pitch 60/item no. Axle pitch 90/item no. 600 2500 3000 450761766 450761767 450764766 450764767 All measurements are in mm. Subject to alteration. Accessories Supports for belt conveyors and driven roller conveyors 3/12/2007 Copyright SOCO SYSTEM A/S Drive section for driven roller conveyors Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 4 Modules Driven curves Curves with conical rollers 90° With two drives for high loadings. The curves are available with guide profiles on both the inside- and the outside. Low guide profile = H1. High guide profile = H2. ■ Driven curves offer smooth product flow. ■ Various gearings and a frequency converter provide adjustability of speed. ■ Large and heavy items can easily be transported. ■ The curves are silent during operation. Specifications Tubes Impact-proof plastic. Axles Gear Ø 10 mm. Standard 20:1 = 10 M/min. Other gearings are available. A frequency control system can be connected direct to the 3-phase motor. With polycord belts. Electro-galvanised steel. 6°. 300, 400, 500, 600 mm. Drive Frames Axle pitch Width Subject to alteration. Item numbers Width H1 inside + H1 outside/Item no. H1 inside + H2 outside/Item no. 300 400 500 600 450137345 450137445 450137545 450137645 450137365 450137465 450137565 450137565 All measurements are in mm. Subject to alteration. Accessories 3/12/2007 Copyright SOCO SYSTEM A/S Supports for belt conveyors and driven roller conveyors Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 5 Modules Belt conveyors Belt conveyors with roller bedding Roller bedding is recommended for lengths over 5 m. Ordering First choose a conveyor of the desired length and width. Then choose a belt of a corresponding length and width. Note! As standard, the motor is fitted on the right side of the belt conveyor, seen in the direction of travel. If the motor needs to be mounted on the left side, this must be stated upon ordering. ■ The construction makes the conveyors ideal for new as well as existing systems. ■ Low noise level and smooth surfaces. ■ An economical solution for long-distance transportation. Specifications Tubes Drive unit Gear Ø 48 mm impact proof plastic. 0.12 kW or 0.37 kW. Standard 40:1 = 10 m/min. Other gearings available. A frequency control system can be connected direct to the 3phase motor. Electro-galvanised steel. 200, 300, 400, 500, 600 mm. Available in lengths ranging from 0.75 m to 10 m. Frames Width Length Subject to alteration. Width Length Item no. 200 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 Not available 450402072 450402102 450402152 450402202 450402252 450402302 450402352 450402402 450402452 450402502 450402552 450402602 450402652 450402702 450402752 450402802 450402852 450402902 450402952 450402992 300 500 750 Not available 450403072 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Item numbers 6 Width Length Item no. 300 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 450403102 450403152 450403202 450403252 450403302 450403352 450403402 450403452 450403502 450403552 450403602 450403652 450403702 450403752 450403802 450403852 450403902 450403952 450403992 400 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 Not available 450404072 450404102 450404152 450404202 450404252 450404302 450404352 450404402 450404452 450404502 450404552 450404602 450404652 450404702 450404752 450404802 450404852 450404902 450404952 450404992 500 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 Not available 450405072 450405102 450405152 450405202 450405252 450405302 450405352 450405402 450405452 450405502 450405552 450405602 450405652 450405702 450405752 450405802 450405852 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Modules 7 Modules Width Length Item no. 500 9000 9500 10000 450405902 450405952 450405992 The prices are excluding belts. All measurements are in mm. Subject to alteration. Accessories Supports for belt conveyors and driven roller conveyors Smooth belts for belt conveyors 3/12/2007 Copyright SOCO SYSTEM A/S Grip belts for belt conveyors Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 8 Modules Belt conveyors Belt conveyors with plate bedding Plate bedding is recommended for short conveyors or for transport of light items. Plate bedding with grooves is used for conveyors where width and length are identical or where the conveyor is loaded from the side. Ordering First choose a conveyor of the desired length and width. Then choose a belt of a corresponding length and width. Conveyors with grooved plate bedding always require belts with guide profile. Note! As standard, the motor is fitted on the right side of the belt conveyor seen in the direction of travel. If the motor needs to be mounted on the left side, it must be stated upon ordering. ■ The construction makes the conveyors ideal for new as well as existing systems. ■ Low noise level and smooth surfaces. ■ An economical solution for long-distance transportation. Specifications Tubes Drive unit Gear Ø 48 mm impact proof plastic. 0.12 kW or 0.37 kW. Standard 40:1 = 10 m/min. Other gearings available. A frequency control system can be connected direct to the 3phase motor. Electro-galvanised steel. 200, 300, 400, 500, 600 mm. Available in lengths ranging from 0.5 m to 10 m. Frames Width Length Subject to alteration. Width Length Standard/item no. With grooves/item no. 200 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 450402050 450402070 450402100 450402150 450402200 450402250 450402300 450402350 450402400 450402450 450402500 450402550 450402600 450402650 450402700 450402750 450402800 450402850 450402900 450402051 450402071 450402101 450402151 450402201 450402251 450402301 450402351 450402401 450402451 450402501 450402551 450402601 450402651 450402701 450402751 450402801 450402851 450402901 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Item numbers 9 Width Length Standard/item no. With grooves/item no. 200 9500 10000 450402950 450402990 450402951 450402991 300 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 450403050 450403070 450403100 450403150 450403200 450403250 450403300 450403350 450403400 450403450 450403500 450403550 450403600 450403650 450403700 450403750 450403800 450403850 450403900 450403950 450403990 450403051 450403071 450403101 450403151 450403201 450403251 450403301 450403351 450403401 450403451 450403501 450403551 450403601 450403651 450403701 450403751 450403801 450403851 450403901 450403951 450403991 400 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 450404050 450404070 450404100 450404150 450404200 450404250 450404300 450404350 450404400 450404450 450404500 450404550 450404600 450404650 450404700 450404750 450404800 450404850 450404900 450404950 450404990 450404051 450404071 450404101 450404151 450404201 450404251 450404301 450404351 450404401 450404451 450404501 450404551 450404601 450404651 450404701 450404751 450404801 450404851 450404901 450404951 450404991 500 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 450405050 450405070 450405100 450405150 450405200 450405250 450405300 450405350 450405400 450405450 450405500 450405550 450405600 450405650 450405051 450405071 450405101 450405151 450405201 450405251 450405301 450405351 450405401 450405451 450405501 450405551 450405601 450405651 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Modules 10 Modules Width Length Standard/item no. With grooves/item no. 500 7000 7500 8000 8500 9000 9500 10000 450405700 450405750 450405800 450405850 450405900 450405950 450405990 450405701 450405751 450405801 450405851 450405901 450405951 450405991 The prices are excluding belts. All measurements are in mm. Subject to alteration. Accessories Supports for belt conveyors and driven roller conveyors Smooth belts for belt conveyors 3/12/2007 Copyright SOCO SYSTEM A/S Grip belts for belt conveyors Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 11 Modules Belt conveyors Smooth belts for belt conveyors For horizontal transportation or inclines of up to 10°. Belts with guide profiles are always used for conveyors where width and length are identical and where the belt conveyor is loaded from the side. Width Length Standard/item no. With guide profile/item no. 200 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 4262001080 4262001560 4262002040 4262003000 4262004080 4262005010 4262005970 4262006930 4262008000 4262008960 4262009910 4262010870 4262011940 4262012900 4262013850 4262014810 4262015880 4262016840 4262017790 4262018740 4262019820 4272001080 4272001560 4272002040 4272003000 4272004080 4272005010 4272005970 4272006930 4272008000 4272008960 4272009910 4272010870 4272011940 4272012900 4272013850 4272014810 4272015880 4272016840 4272017790 4272018740 4272019820 300 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 4262101080 4262101560 4262102040 4262103000 4262104080 4262105010 4262105970 4262106930 4262108000 4262108960 4262109910 4262110870 4262111940 4262112900 4262113850 4262114810 4262115880 4262116840 4262117790 4262118740 4262119820 4272101080 4272101560 4272102040 4272103000 4272104080 4272105010 4272105970 4272106930 4272108000 4272108960 4272109910 4272110870 4272111940 4272112900 4272113850 4272114810 4272115880 4272116840 4272117790 4272118740 4272119820 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Item numbers 12 Width Length Standard/item no. With guide profile/item no. 400 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 4262201080 4262201560 4262202040 4262203000 4262204080 4262205010 4262205970 4262206930 4262208000 4262208960 4262209910 4262210870 4262211940 4262212900 4262213850 4262214810 4262215880 4262216840 4262217790 4262218740 4262219820 4272201080 4272201560 4272202040 4272203000 4272204080 4272205010 4272205970 4272206930 4272208000 4272208960 4272209910 4272210870 4272211940 4272212900 4272213850 4272214810 4272215880 4272216840 4272217790 4272218740 4272219820 500 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 4262301080 4262301560 4262302040 4262303000 4262304080 4262305010 4262305970 4262306930 4262308000 4262308960 4262309910 4262310870 4262311940 4262312900 4262313850 4262314810 4262315880 4262316840 4262317790 4262318740 4262319820 4272301080 4272301560 4272302040 4272303000 4272304080 4272305010 4272305970 4272306930 4272308000 4272308960 4272309910 4272310870 4272311940 4272312900 4272313850 4272314810 4272315880 4272316840 4272317790 4272318740 4272319820 600 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 4262401080 4262401560 4262402040 4262403000 4262404080 4262405010 4262405970 4262406930 4262408000 4262408960 4262409910 4262410870 4262411940 4262412900 4262413850 4262414810 4272401080 4272401560 4272402040 4272403000 4272404080 4272405010 4272405970 4272406930 4272408000 4272408960 4272409910 4272410870 4272411940 4272412900 4272413850 4272414810 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Modules 13 Modules Width Length Standard/item no. With guide profile/item no. 600 8000 8500 9000 9500 10000 4262415880 4262416840 4262417790 4262418740 4262419820 4272415880 4272416840 4272417790 4272418740 4272419820 All measurements are in mm. Subject to alteration. 3/12/2007 Copyright SOCO SYSTEM A/S Belt with guide profile. Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 14 Modules Belt conveyors Grip belts for belt conveyors Grip belts are recommended for inclines ranging from 10º to 28º. Belts with guide profiles are used for conveyors where width and length are identical or where the conveyor is loaded from the side. Width Length Standard/item no. With guide profile/item no. 200 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 4260001080 4260001560 4260002040 4260003000 4260004080 4260005010 4260005970 4260006930 4260008000 4260008960 4260009910 4260010870 4260011940 4260012900 4260013850 4260014810 4260015880 4260016840 4260017790 4260018740 4260019820 4270001080 4270001560 4270002040 4270003000 4270004080 4270005010 4270005970 4270006930 4270008000 4270008960 4270009910 4270010870 4270011940 4270012900 4270013850 4270014810 4270015880 4270016840 4270017790 4270018740 4270019820 300 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 4260101080 4260101560 4260102040 4260103000 4260104080 4260105010 4260105970 4260106930 4260108000 4260108960 4260109910 4260110870 4260111940 4260112900 4260113850 4260114810 4260115880 4260116840 4260117790 4260118740 4270101080 4270101560 4270102040 4270103000 4270104080 4270105010 4270105970 4270106930 4270108000 4270108960 4270109910 4270110870 4270111940 4270112900 4270113850 4270114810 4270115880 4270116840 4270117790 4270118740 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Item numbers 15 Width Length Standard/item no. With guide profile/item no. 300 10000 4260119820 4270119820 400 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 4260201080 4260201560 4260202040 4260203000 4260204080 4260205010 4260205970 4260206930 4260208000 4260208960 4260209910 4260210870 4260211940 4260212900 4260213850 4260214810 4260215880 4260216840 4260217790 4260218740 4260219820 4270201080 4270201560 4270202040 4270203000 4270204080 4270205010 4270205970 4270206930 4270208000 4270208960 4270209910 4270210870 4270211940 4270212900 4270213850 4270214810 4270215880 4270216840 4270217790 4270218740 4270219820 500 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 4260301080 4260301560 4260302040 4260303000 4260304080 4260305010 4260305970 4260306930 4260308000 4260308960 4260309910 4260310870 4260311940 4260312900 4260313850 4260314810 4260315880 4260316840 4260317790 4260318740 4260319820 4270301080 4270301560 4270302040 4270303000 4270304080 4270305010 4270305970 4270306930 4270308000 4270308960 4270309910 4270310870 4270311940 4270312900 4270313850 4270314810 4270315880 4270316840 4270317790 4270318740 4270319820 600 500 750 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 4260401080 4260401560 4260402040 4260403000 4260404080 4260405010 4260405970 4260406930 4260408000 4260408960 4260409910 4260410870 4260411940 4260412900 4260413850 4270401080 4270401560 4270402040 4270403000 4270404080 4270405010 4270405970 4270406930 4270408000 4270408960 4270409910 4270410870 4270411940 4270412900 4270413850 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Modules 16 Modules Width Length Standard/item no. With guide profile/item no. 600 7500 8000 8500 9000 9500 10000 4260414810 4260415880 4260416840 4260417790 4260418740 4260419820 4270414810 4270415880 4270416840 4270417790 4270418740 4270419820 All measurements are in mm. Subject to alteration. 3/12/2007 Copyright SOCO SYSTEM A/S Belt with guide profile. Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 17 Modules Belt conveyors Belt conveyors with triplex angles Suitable for transport of items that are not suited for sudden transition from inclined to horizontal transport. Inclined and horizontal conveyors are manufactured and combined according to requirements. Available with roller, plate, or grooved plate bedding. Belts available are smooth belts, grip belts, and food belts. ■ Ensure smooth transition between inclined and horizontal transport. ■ Suitable for inclined transport of unstable items. ■ Low noise level and smooth surfaces. ■ The speed can be adjusted by means of various gearings or a frequency inverter. Specifications Tubes Drive unit Gear Ø 48 mm impact proof plastic. 0.12 kW or 0.37 kW. Standard 40:1 = 10 m/min. Other gearings available. A frequency control system can be connected direct to the 3phase motor. Electro-galvanised steel. 200, 300, 400, 500, 600 mm. According to requirements. Frames Width Length Subject to alteration. Accessories 3/12/2007 Copyright SOCO SYSTEM A/S Supports for belt conveyors and driven roller conveyors Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 18 Modules Belt conveyors Belt conveyors with booster For gentle transport - up or down. Inclined and horizontal conveyors are manufactured and combined according to requirements. Belt As standard, the booster is fitted with a smooth belt and the conveyor with a grip belt. 0.5 m long boosters wider than 400 mm are always delivered with belts with guide profile. Contact our sales department regarding food belts and other belt types. Bedding As standard, 0.5 m long and 400 mm wide boosters are supplied with grooved plate bedding. Conveyors and boosters of 1 m are supplied with roller bedding. Contact our sales department if another bedding is required. Note! A minimum of three supports is required for a conveyor with booster. As standard, the motor is fitted on the left side of the booster. For mounting on the other side, please specify this upon ordering. Ordering Choose a booster of the desired width and length (the booster is the horizontal conveyor). Then choose the length of the incline conveyor. The item number is stated under the booster. Then choose the belt. ■ Ideal for wide transfer angles. Specifications Gear Standard 40:1 = 10 m/min. Other gearings available. A frequency control system can be connected direct to the 3phase motor. Electro-galvanised steel. 200, 300, 400, 500, 600 mm. The booster is available in lengths of 0.5 m and 1.0 m. The conveyor is available in lengths up to 10 m. For lengths over 5 m, please contact our sales department. Frames Width Length Subject to alteration. Width Conveyor length (L1) Booster 0.5 m (L2)/item no. Booster 1.0 m (L2)/item no. 200 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 450502011 450502022 450502032 450502042 450502052 450502062 450502072 450502082 450502092 450502102 450502212 450502222 450502232 450502242 450502252 450502262 450502272 450502282 450502292 450502302 300 500 450503011 450503212 Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 3/12/2007 Copyright SOCO SYSTEM A/S Item numbers 19 Modules Width Conveyor length (L1) Booster 0.5 m (L2)/item no. Booster 1.0 m (L2)/item no. 300 1000 1500 2000 2500 3000 3500 4000 4500 5000 450503022 450503032 450503042 450503052 450503062 450503072 450503082 450503092 450503102 450503222 450503232 450503242 450503252 450503262 450503272 450503282 450503292 450503302 400 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 450504011 450504022 450504032 450504042 450504052 450504062 450504072 450504082 450504092 450504102 450504212 450504222 450504232 450504242 450504252 450504262 450504272 450504282 450504292 450504302 500 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 450505011 450505022 450505032 450505042 450505052 450505062 450505072 450505082 450505092 450505102 450505212 450505222 450505232 450505242 450505252 450505262 450505272 450505282 450505292 450505302 The prices are excluding belts. All measurements are in mm. Subject to alteration. Accessories Supports for belt conveyors and driven roller conveyors 3/12/2007 Copyright SOCO SYSTEM A/S Belt for belt conveyor with booster Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 20 Modules Belt conveyors Belt for belt conveyor with booster As standard, belt conveyors are supplied with a smooth belt for the booster and a grip belt for the conveyor. From a width of 400 mm, belts supplied for 0.5 m boosters are always supplied with guide profiles. For food belts and other belt types, please contact our sales department. Width Conveyor length For conveyor For booster 0.5 m/item no. For booster 1.0 m/item no. 200 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 4260001080 4260002040 4260003000 4260004080 4260005010 4260005970 4260006930 4260008000 4260008960 4260009910 4262001080 4262001080 4262001080 4262001080 4262001080 4262001080 4262001080 4262001080 4262001080 4262001080 4262002040 4262002040 4262002040 4262002040 4262002040 4262002040 4262002040 4262002040 4262002040 4262002040 300 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 4260101080 4260102040 4260103000 4260104080 4260105010 4260105970 4260106930 4260108000 4260108960 4260109910 4262101080 4262101080 4262101080 4262101080 4262101080 4262101080 4262101080 4262101080 4262101080 4262101080 4262102040 4262102040 4262102040 4262102040 4262102040 4262102040 4262102040 4262102040 4262102040 4262102040 400 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 4270201080 4260202040 4260203000 4260204080 4260205010 4260205970 4260206930 4260208000 4260208960 4260209910 4272201080 4272201080 4272201080 4272201080 4272201080 4272201080 4272201080 4272201080 4272201080 4272201080 4262202040 4262202040 4262202040 4262202040 4262202040 4262202040 4262202040 4262202040 4262202040 4262202040 500 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 4270301080 4260302040 4260303000 4260304080 4260305010 4260305970 4260306930 4260308000 4260308960 4260309910 4272301080 4272301080 4272301080 4272301080 4272301080 4272301080 4272301080 4272301080 4272301080 4272301080 4262302040 4262302040 4262302040 4262302040 4262302040 4262302040 4262302040 4262302040 4262302040 4262302040 3/12/2007 Copyright SOCO SYSTEM A/S Item numbers All measurements are in mm. Subject to alteration. Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 21 Case sealers for random case sizes T-55 Automatic adjustment for case size - Top and bottom closure The automatic height and width adjustment makes the T-55 ideal in packing lines where case sizes vary, e.g. in the dispatch department of warehouses. Two operators can work simultaniously on either side of the packing table. The T-55 can operate as a fully automatic top and bottom sealer provided the top flaps of the case are closed by means of a control label or a small piece of tape. Basic models T-55 and T-55 Maxi. Both models are available with high pillars for extra tall cases. ■ Easy tape and dispenser replacement. ■ Easy to maintain with low maintenance and spare parts costs. ■ Wide range of accessory equipment. ■ Electro-galvanised or stainless steel finish. T-55 5-5-7 T-55 5-8-7 T-55 Maxi 7-5-7 T-55 Maxi 7-8-7 Case dimensions* Max. (LxWxH) mm Min. (LxWxH) mm ∞ x 510 x 510 160 x 95 x 85 ∞ x 510 x 810 160 x 95 x 220 ∞ x 720 x 510 160 x 150 x 115 ∞ x 720 x 810 160 x 150 x 220 Tape overlap 70 mm 50 mm ● ○ ● ○ ● ○ ● ○ Tape width 25 - 30 mm 38 - 50 mm 50 - 75 mm ○ ● ○ ○ ● ○ ○ ○ ● ○ ○ ● Side drives Height 50 mm Height 80 mm ● ○ ● ○ ○ ● ○ ● Working height max./min. 920 - 820 mm 820 - 720 mm 720 - 620 mm 620 - 520 mm 520 - 420 mm ○ ○ ● ○ ○ ○ ○ ● ○ ○ ○ ○ ● ○ ● ○ ○ ● ○ ○ Weight kg 165 165 170 170 Capacity* Max. 16 cases/ min. Electric specifications 3 x 230/400 V, 50-60 Hz, or 3 x 415/460 V, 50-60 Hz. Connected load 0.3 kW. Other specifications available upon request. Air consumption Max. 8.5 l at 6 bar per case. Tape diameter Max. 385 mm. ● Standard ○ Optional *Depending on the construction and quality of the case. Subject to alteration. Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 22 3/12/2007 Copyright SOCO SYSTEM A/S Specifications Case sealers for random case sizes High quality tape dispensers. Pillar stop for maximum efficiency. 3/12/2007 Copyright SOCO SYSTEM A/S The model T-55 is for packing stations that handle many different sizes of case. Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 23 Case sealers for random case sizes T-602 Fully automatic - Top and bottom closure Automatic case size adjustment and flap closure. Together with SOCO SYSTEM controllers, complete feed-in control and maximum capacity is achieved. Basic models T-602 and T-602 Maxi. An extensive programme of accessories is available for both models, e.g. extra high pillars. Smallest external dimensions on the market The T-602 is a very compact machine with the smallest external dimensions in relation to its high capacity. ■ Wide range of accessory equipment. ■ Easy tape and dispenser replacement. ■ Easy to maintain with low maintenance and spare parts costs. ■ Electro-galvanised finish. Specifications T-602 5-5-8 T-602 5-8-8 Case dimensions* Max. (LxWxH) mm Min. (LxWxH) mm 600 x 460 x 475 200 x 120 x 120 600 x 460 x 765 200 x 120 x 220 Tape overlap 70 mm 50 mm ● ○ ● ○ Tape width 25 - 30 mm 38 - 50 mm ○ ● ○ ● Side drives Height 50 mm Height 80 mm ○ ● ○ ● Working height max./min. 920 - 820 mm 820 - 720 mm 720 - 620 mm 620 - 520 mm 520 - 420 mm ○ ● ○ ○ ○ ○ ● ○ ○ ○ Weight kg 220 220 Capacity* Max. 8 cases/min. Electric specifications 3 x 230/400 V, 50-60 Hz, or 3 x 415/460 V 50-60 Hz. Connected load 0.3 kW. Other specifications available upon request. Air consumption 5-5-8 max. 16.7 l at 6 bar per case, 5-8-8 max. 21.5 l at 6 bar per case. Tape diameter Max. 385 mm. ● Standard ○ Optional *Depending on the construction and quality of the case. 3/12/2007 Copyright SOCO SYSTEM A/S Subject to alteration. Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 24 B Belt conveyors with booster Belt conveyors with plate bedding Belt conveyors with roller bedding Belt conveyors with triplex angles Belt for belt conveyor with booster 19 9 6 18 21 C Coupled section for driven roller conveyors Curves with conical rollers 90° 3 5 D Drive section for driven roller conveyors 1 G Grip belts for belt conveyors 15 S Smooth belts for belt conveyors 12 T 22 T-602 Fully automatic - Top and bottom closure 24 3/12/2007 Copyright SOCO SYSTEM A/S T-55 Automatic adjustment for case size - Top and bottom closure Tel: + 45 43 52 55 66 Fax: + 45 43 52 81 16 E-mail: [email protected] Web: www.socosystem.com 25 Geberit AG, Switzerland Sig. Ágústsson, Iceland The SOCO SYSTEM From case erecting to pallet securing The SOCO SYSTEM product range handles cases, plastic crates, trays, pallets, and many of your products. The SOCO SYSTEM product range is designed to increase efficiency and eliminate physically strenous work functions. Laru, Germany One system – one supplier There are many advantages of full product compatibility; less paperwork and no time wasted in adapting products from different suppliers. Toms, Denmark Meet your future requirements Add modules and functionality, relocate modules, or whatever fits your future needs. Rioja, Spain Call us, mail us, or visit us at www.socosystem.com Your local SOCO SYSTEM dealer: Beechwood, Nenagh, Co. Tipperary, Ireland C OPYRIGHT SOCO SYSTEM 2006 Bouché Père & Fils, France United Milk, England Head office: SOCO SYSTEM A/S Helgeshoej Allé 16D DK-2630 Taastrup Denmark Tel +45 43 52 55 66 Fax +45 43 52 81 16 [email protected] www.socosystem.com Altmark Käserei, Germany
