Technical Specifications

 Te ch n ica l S p e cifica t ion s:
Handcrafted manual winding Soberly Onyx timepice based on the robust vintage 1950’s
Cyma 586k caliber.
Limited edition of 10 pieces with handmade four arms balance wheel system and bridge.
Exterior
1
Case
In 18k White Gold with synthetic sapphire crystal.
Transparent display back with synthetic sapphire crystal.
Polished bezel.
Straight-grained caseband.
Gold hand-polished screws.
Dim ensions
Diameter : 40mm
Thickness : 9.30mm
W ater resistance of the case
3 atm – 30m – 100 ft
Crown
Handmade in 18k white gold.
Onyx cabochon inset.
Dial
Onyx dial.
Mysterious small second display at 6 o’clock.
Handmade 18k white gold frosted indexes with straight-grained flanks and polished
bevelling.
Hands
Handmade straight-grained hardened steel hands with polished bevelling.
Black polished and bevelled small second hand.
Strap and buckle
Hand Sewn Genuine Leather.
18k white gold pin buckle with engraved Pagès logo
Movem ent
Movem ent dim ensions
Diameter: 33.80mm
Thickness: 3.65mm
Power reserve
42 hours
Frequency
18’000 vibration/hours
Num ber of parts
112 parts
Num ber of jewels
17
Olived-domed jewels in gold chatons.
Raúl Pagès | Rue Pierre Seitz 10 | 2416 Les Brenets | Switzerland
[email protected] | +41 32 913 16 34 | www.pageswatches.com
Balance
Following George Daniels’ principles of construction “Watchmaking” (ISBN 978-2-97006566-1). Large (13.4mm) handmade variable-inertia four arms balance with gold regulating
masselottes.
Blued free sprung balance-spring.
Handmade fine tuning of the whole regulating system with Philipps terminal curve.
Gearing
Circular-grained wheels with hand-polished bevelled arms.
Flat black-polished steel lever.
Barrel
Circular-grained barrel.
Fixed mainspring-bridle.
W inding System
Snailed handmade ratchet.
Black polished crown-wheel and click.
Main plates
Nickel silver plate with handmade frosting.
Black ruthenium treatment.
Bridges
Nickel silver hand-recut bridges with a hacksaw.
Handmade frosting, straight-grained flanks, polished bevelling and countersinks.
Rhodium treatment.
Hand-polished gold chatons.
Black-polished and beveled screws.