Cub Cadet

Transcription

Cub Cadet
cubcadet.eu
POLE POSITION!
SUMMER
PRODUCT PROGRAM 2015
TABLE OF CONTENTS
GENERAL INFORMATION
RELAX PROGRAM
ACTIVE PROGRAM
COMFORT PROGRAM
TIME EFFICIENT PROGRAM
UTILITY VEHICLE
CHORE PERFORMER
HISTORY
AWARDS
HOW DO YOU LIKE TO MOW YOUR LAWN?
BAGGING / MULCHING / DISCHARGE
2
3
4
5
ROBOTIC MOWER
6
WALK BEHIND MOWER
FIND THE RIGHT LAWN MOWER FOR YOUR GARDEN
CLASSIC SERIES
TRILOY SERIES
MULCHING MOWER
WIDE AREA MOWER
13
14
18
22
23
LAWN TRACTORS
FIND THE RIGHT LAWN TRACTOR OR RIDER FOR YOUR GARDEN
MINIRIDER
700 SERIES SIDE DISCHARGE
700 SERIES REAR DISCHARGE
1000 SERIES SIDE DISCHARGE
1000 SERIES REAR DISCHARGE
1000 SERIES HIGH GRASS MOWER
25
26
30
32
34
38
42
GARDEN TRACTOR
2000 SERIES GARDEN TRACTOR
44
TRACTOR ACCESSORIES & ATTACHMENTS
46
ZERO-TURN
CUT DOWN YOUR MOWING TIME UP TO 50 %
RZT-S SERIES
–
ZERO-TURN WITH STEERING WHEEL
Z-FORCE SERIES
–
ZERO-TURN WITH STEERING WHEEL
TANK SZ
–
ZERO-TURN WITH STEERING WHEEL
RZT SERIES
–
LAP BAR ZERO-TURN
51
52
54
56
58
UTILITY VEHICLE
60
TILLER
CHIPPER/SHREDDER/VACUUM
SCARIFIER
64
66
68
EMISSION OVERVIEW
69
ds
upp
l em
e nt a
r y per
formance according to
wa r
ran
t
yc
on
dit
i on
s(
se
e
o
w
uc
i te
ty
MT
D
n
ra
ar
Pr
od
l im
ur
dit i
of t
he
n
co
bcadet.eu)
*Manufacturer's
on w
warr
anty
on s
*
ww . cu
3 YEARS WARRANTY FOR
ALL CUB CADET PRODUCTS
ts
,
AG
* Manufacturer's warranty of the MTD Products AG, limited supplementary performance
according to warranty conditions (see our warranty conditions on www.cubcadet.eu)
u
cubcadet.e
RED!
BE PREPA
LUTI
SN
1980
1ST SHAFT
DRIVE MODEL
1ST SUPER
GARDEN
TRACTOR
1ST TWIN
CYLINDER
ENGINE
ONA
O
W
TH
1963
GE
REVO
1ST CUB CADET
HITS THE
MARKET
A
TH
REE- ST
1961
ROWER
RY
S
R 2014/15
WINTE
T PROGRAM
PRODUC
Please check our Winter
catalog for information about
our Winter program including
the revolutionary and powerful
3-stage snow thrower range.
1966
WORLD’S 1ST
HYDROSTATICDRIVE GARDEN
TRACTOR
1972
“CADET”
LAWN
TRACTOR
DEBUTS
1985
THE NEW
STANDARD
IN QUALITY
OF CUT
1
1ST
TR
DR
TH
cubcadet.eu
CUB CADET PRODUCTS RECEIVED HONORS
..............................................................................................................................................................................................
GTX 2100
Product to be found
in Winter catalog
2014/15
Product on
page 44
"Garden tractor
of the year 2012"
Z-FORCE S 48
Product on
page 54
UTV 4X4 DIESEL
Product on
page 60
"Ride-on mower
of the year 2012"
"Utility vehicle
of the year 2012"
PLUS X-AWARD
With more than 130 independent judges from 32 countries, 32 expert partners and a marketing investment of more than 25
million euros, the Plus X Award is the world’s largest competition for innovative technology, sports and lifestyle products.
Products that possess at least one of the defined “Plus X Factors” are awarded a Plus X seal of quality. Awards are
conferred for newly developed, innovative technologies, unusual design and intelligent, user-friendly operating concepts.
Ergonomic design and ecologically friendly features, along with workmanship and the quality of materials used, result in
sustainable and long-lasting products and are therefore also eligible for awards. Initiated with a view toward strengthening
the value of commendable brands, the Plus X Award is now entering its eleventh year.
1993
1ST STEERABLE
TRACK
DRIVE SNOW
THROWER
1994
1ST LAWN
TRACTOR
WITH SHAFT
DRIVE
2006
UTILITY VEHICLES
DEBUT
2009
INDUSTRY’S
TIGHTEST
TURNING RADIUS
2011
CELEBRATING
WITH
INNOVATION
2013
INTRODUCTION
OF ROBOTIC
MOWER
Series
1990
MOST ADVANCED
GARDEN TRACTOR
IN INDUSTRY
2005
500 SERIES LAWN
TRACTORS – MADE IN
GERMANY
2007
SYNCHRO STEER
TECHNOLOGY
DEBUTS, AN
INDUSTRY FIRST
2010
MOST ADVANCED
RESIDENTIAL
ZERO-TURN WITH
LP TECHNOLOGY
2012
INTRODUCTION
OF THE TRILOY
SERIES LAWN
MOWERS
2014
INTRODUCTION
OF THE
INNOVATIVE
BOOSTED
AIRFLOW
TECHNOLOGY
2015
MYSPEED –
THE INNOVATIVE
VARIABLE SPEED
SYSTEM
HOW DO YOU LIKE TO MOW YOUR LAWN?
..............................................................................................................................................................................................
Active
Comfort
CO
M
RT
AC
E
V
I
You like to enjoy your garden work but want
to avoid great efforts. You like it comfortable,
supported by the technical features of high end
riders, lawn tractors or garden tractors.
FO
X
A
L
T
I
M
E
CI
ENT
RE
You like to enjoy your garden and having as little
as possible work with it. That’s not any longer
a dream. Our LAWNKEEPER robotic mowers
ensure that your lawn is always beautifully cared
for – automatically. You can stay relaxed and
enjoy your garden.
E
F
Relax
FI
T
You like to have it sportive and the activity
supports your health. But this does not mean
that you do it without all the technical support
which is state of the art.
Time-efficient
You like to mow your lawn comfortably and as
fast as possible. Then our zero-turn lawn tractors
are the right choice for you. You can save up
to 50 % mowing time compared to a standard
tractor due to the unbeatable manoeuvrability
and high mowing speed of these mowers.
cubcadet.eu
Bagging / Mulching / Discharge
There are different ways of disposing the clippings: mulching, bagging or discharge. Some of the Cub Cadet lawn mowers
offer all three functions simultaneously; other mowers can be converted with appropriate attachments. You can recognize
these units by our logos:
2-in-1 means that you have two functions in one mower: mulching and discharge
(models CC 53 MO & CC 53 MSPO).
3-in-1 means that the mower can as well mulch as rear-discharge and bag the clippings.
You have three functions in one mower.
3-in-1 Option means that at least one technique is standard and that one or two more
methods of grass disposal can be added with according attachments.
4-in-1 option has the 3-in-1 posibilities plus side-discharge function.
Bagging:
Bagging is recommended for those
who don´t have the time to mow very
often and want to have a clean looking well-groomed garden as well.
Besides that, bagging has the advantage to take debris such as leaves and dead grass out and make
room for light and water. In return,
the garden needs a good amount of
water and fertilizer for a healthy appearance and the grass needs to be
disposed into a composter, a green
bag or just an invisible area.
When bagging the clippings, the resistance on the cutting blade is less
than when mulching because grass
is cut once and directly transported
into the bag. Therefore, energy consumption is in favor of bagging.
Mulching:
Mulching is recommended for wellgroomed gardens and for people
who have the ability to mow at least
twice a week during high season.
When mulching, the grass swirls
around the cutting deck and is thus
being cut several times until particles are so small that they will fall
through the blades onto the ground.
As grass consists almost 90 % of
water, it is recycled back into the
soil and not lost. It can be used as
a natural green fertilizer. The smaller
the particles are, the better groomed the garden looks and less debris lies on top of the grass.
When mulching, the grass clippings
should not be longer than max. 1 - 2
cm. Energy consumption will raise
dramatically with length of grass as
the resistance gets higher with extra
grass volume.
Discharge:
When discharging the clippings, the
grass is usually released through an
opening on the side or rear of the
cutting deck and spread back onto
the garden. This type of lawn care is
usually recommended for more natural meadows that don´t need cutting as frequently as well-groomed
gardens and that grow higher.
Usually, these conditions do not
persist around the house as the
grass debris will end up in the
house, pool or walkways.
The resistance on the blade is almost identical to bagging but backpressure from a grass catcher is
absent, so discharging is the most
energy efficient method to mow.
5
RELAX
RELAX
LAWNKEEPER
BATTERY POWERED
LAWNKEEPER
LAWNKEEPER 600
LAWNKEEPER 1800
ROBOTIC LAWN MOWERS
FOR MORE LEISURE AND LESS WORK.
With our range of fully autonomous robotic lawn mowers you will be on the winner's side. All there
is to do is the simple installation of the boundary wire around the lawn and to define a place for the
base station which is also the charging station for the LAWNKEEPER. With a quick one-time-setup
you teach the mower the size and individual layout of your lawn and that's it! Your LAWNKEEPER will
then automatically calculate the required mowing time to keep your lawn always perfectly cut during
the entire mowing season. From now on you will have more free time, while the LAWNKEEPER does
the mowing for you. Quiet, strong, fast, environmentally conscious and cost efficient. As mentioned
before, you will be a winner with your new LAWNKEEPER.
LAWNKEEPER 3000
FEATURES
.................................
FULLY AUTOMATIC
ROBOTIC LAWN MOWER,
EASY TO INSTALL
.................................
Battery
Cutting
deck
Use
THE STRONGEST BLADE
MOTORS IN ITS CLASS,
IT CAN EVEN DO THE FIRST
CUT OF THE SEASON
Recommended area
Cutting width/height
Mowing zones
Battery
Running time
Material
Blade
LAWNKEEPER 1800
LAWNKEEPER 3000
up to 600 m²
up to 1.800 m²
up to 3.000 m²
Maximum incline
Charging time/cycles
Wheels
LAWNKEEPER 600
Blade motor
19,2° / 35 %; on the boundary wire: 5,7° / 10 %
28 cm / 15 – 60 mm
56 cm / 20 – 80 mm
56 cm / 20 – 80 mm
1 main zone, 3 sub zone,
separate zones possible
1 Main zone + 4 sub zones,
separate zones possible
1 Main zone + 4 sub zones,
separate zones possible
26 V 3 Ah lithium iron
phosphate battery
26 V 4 Ah lithium iron
phosphate battery
26 V 6 Ah lithium iron
phosphate battery
50-65 minutes
60-80 minutes
90 minutes
50-70 minutes / up to 2.000
90-120 minutes / up to 2.000
90-120 minutes / up to 2.000
1 x FastAttachTM hardened steel
blade
2 x FastAttachTM hardened steel
blades
2 x FastAttachTM hardened steel
blades
1 x 200 W DC Brush
2 x 200 W DC Brush
2 x 150 W DC Brushless
Speed
Eco mode: 3.300 min / Power mode: 4.000 min
Profile
Maximum traction
-1
Alarm system
Standard
Rain sensor
Adjustable
L x W x H (approx.)
Accessory
Standard
Display
Weight (approx.)
Noise level
Illuminated LC display
Illuminated LC display
60,5 cm x 44 cm x 27 cm
73,5 cm x 66 cm x 31,5 cm
73,5 cm x 66 cm x 31,5 cm
10,5 kg
19 kg
19 kg
Measured: 68 db (A),
guaranteed: 70 db (A)
Measured: 72 db (A),
guaranteed: 74 db (A)
Measured: 72 db (A),
guaranteed: 74 db (A)
Standard
Plastic pegs
Standard
Charging station /
Remote control
Model number
.................................
EXTREMELY QUIET
.................................
MOWING AND MULCHING
AT THE SAME TIME
.................................
ENVIRONMENTALLY
FRIENDLY
.................................
EASY WINTERIZE
SOLUTION DUE TO
WINTER CHARGING
FUNCTION
.................................
LED display
Boundary wire
LITTLE MOWING TIME
REQUIRED ONLY DUE TO
LARGE CUTTING WIDTH
MODEL 1800 WITH
REMOTE CONTROL
INCLUDED
Standard / Standard
PIN code
Properties
Lift / Tilt sensor
EDGE CUTTING FUNCTION
.................................
.................................
Standard
Dimensions
Safety
Bump sensor
-1
.................................
Standard / o (196-810-678)
Standard / Standard
Standard / o (196-804-678)
18BO06LF603
18BO18LF603
18AO30LF603
EAN
cubcadet.eu
Price*
o = available as accessory
*Recommended retail price of the manufacturer
7
SUPERIOR FEATURES OF THE LAWNKEEPER FAMILY
..............................................................................................................................................................................................
Quick and easy to set up
Durable steel blades
The intuitive menu system on the display
makes it easy to enter the mowing program, while the area to be mown can be
quickly defined in just a few steps. Simply lay the boundary wire around the area
to be mown and secure it in the ground
with the included solid plastic pegs. You
can exclude obstacles like bushes or
ponds, while hard objects as i. e. a tree
are automatically detected and avoided.
All LAWNKEEPER come with hardened
steel blades which will last for up to a
whole season. The strong blades in
combination with the continuously variable cutting height enable the mower to
cut high grass and manage the first cut
of the season. No need to use a conventional mower.
Complete safety concept
Accurate edge cutting
In edge-cutting mode, the LAWNKEEPER mows the edges of the lawn twice
a week. Overlapping blades extending
beyond the wheels ensure an accurate,
clean cut right up to the edges. No need
for time consuming finishing work!
3h
9h
All-round
safety
More freedom thanks
to higher efficiency
The performance of the Cub Cadet
LAWNKEEPER is impressive. They are
on the lawn only for a short time due
to their high efficiency. The LAWNKEEPER 1800�s and 3000�s high efficiency is
achieved through its wide cut of 56 cm.
Random return – avoids
leaving tracks
80 cm
Sensitive rain sensor
The LAWNKEEPER comes with a battery maintenance kit. Connected up to this
system, it can spend the winter safely in
your garage or tool-shed and the trickle
charge keeps the battery healthy.
Mow and mulch
at the same time
Remote control
The remote control is a useful accessory if you want to mow the grass without
automatic programming, for example in
hard to reach corners of the garden, or if
you want to manoeuvre the LAWNKEEPER from the main mowing zone to an
additional separate zone. You can operate both the blades and the steering via
remote control.
The LAWNKEEPER’s mulching system
cuts the grass into tiny particles at up to
4.000 rpm. This also “irrigates” the lawn,
because grass consists of 90 % water.
No need to compost or dispose of the
clippings. Mulching is a natural fertilizer
however it cannot provide all nutrients.
Please ask your local dealer for special
fertilizer for robotic mowers.
The blade can be replaced on all LAWNKEEPER models with the included blade
removal tool within seconds.
To recharge the battery, the LAWNKEEPER has to return to the charging
station. It uses the boundary wire as a
guide and follows it back to the charging
station, but always on a slightly different
route. This means that it does not leave
tracks in the lawn.
Battery maintenance
kit to winterize
The housing of the mower and the blades have to be cleaned more often if the
grass is mown in the rain. To avoid this,
there is a rain sensor which prevents the
mower from starting or let it stop mowing
and return to the base station when it‘s
raining. The sensitivity of the sensor to
moisture can be individually set using the
menu.
Changing the blades
is so easy
Sensors and switches ensure that the
LAWNKEEPER switches off as soon as it
is lifted up or tilted. Bump sensors react
to fixed obstacles immediately and the
mower changes direction.
Quiet lawn mowing
max.
70 dB(A)
The housing encases the entire cutting
deck very well to prevent fingers or toes
getting trapped. This design, combined
with the sound-optimised blades, makes
for quiet mowing.
cubcadet.eu
Low maintenance costs
thanks to modular
construction
Cleaning and maintenance are quick and simple thanks to the modular construction of all
main components.
Smartphone App
With the free App you have full control of your
LAWNKEEPER. Get information about the
current status, change the settings or even
navigate your LAWNKEEPER into hard to
reach corners with the remote control function.
Intelligent power box
The power box is kept in the house and
supplies the charging station with power.
It also shows the machine status and allows
you to use the keypad to stop the mowing
process or delay when the LAWNKEEPER
starts its work.
Floating cutting deck
(On models LAWNKEEPER 1800 & 3000)
The unique design of the cutting deck support
lets the deck float over uneven terrain, thus
providing a perfect and even cut.
9
ONE TIME SETUP
EASY INSTALLATION AND PROGRAMMING
No garden is alike. Some lawns are in one piece, others are subdivided in several zones and others have a separate zone
which needs a cut too. The Cub Cadet LAWNKEEPER can handle all these different lawn types with ease.
Example: One Main Zone only
Scope of delivery
Example: Main Zone and Sub Zone
Easy installation
Simple one-time setup
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
Example: Main Zone and Separate Zone
Ready to mow!
CUB CADET ADVANTAGE.
REMOTE CONTROL
NAVIGATE YOUR LAWNKEEPER WITH THE REMOTE CONTROL OR WITH YOUR SMARTPHONE
(Included on LAWNKEEPER 1800 – optional on LAWNKEEPER 600 and 3000)
With the remote control or smartphone app you can navigate your LAWNKEEPER effortlessly to a separate mowing zone,
into narrow spots which are hard to reach, or back to the base station.
cubcadet.eu
SUMMARY OF THE LAWNKEEPER
TOP ADVANTAGES
..............................................................................................................................................................................................
In direct comparison with robotic mowers from other manufacturers, the Cub Cadet LAWNKEEPER impress by the
following features:
Edge mowing mode
no more edge trimming required
Strong mowing motors
cut even high grass
Solid steel blades
cut a whole season. No need for a conventional mower for the first cut of the season!
FastDue to the large cutting width, the LAWNKEEPER models are much faster done
with their job than other robotic mowers.
No tracksThe random return mode let the LAWNKEEPER drive back to the charging station
in a different distance to the boundary wire every time.
Newest battery technology Allows up to 2000 charging cycles - twice as many as with conventional Li-Ion
batteries.
Remote control included
No need for a walk behind mower to mow corners which are hard to reach.
Smartphone AppDownload the free App and use your Smartphone as a remote control and to get full
access to the settings of your LAWNKEEPER.
ACCESSORIES
ACCESSORIES
Additional base station
Additional base station
Additional limiter switch for boundary wire,
with holder (battery not included)
Battery for limiter switch
Extra boundary wire (150 metres)
Extra plastic pegs for boundary wire (50 pieces)
Extra connectors for boundary wire (10 pieces)
Remote control
Remote control
ART. NO.
LAWNKEEPER
600
196-794-678
LAWNKEEPER
1800
LAWNKEEPER
3000
X
X
196-809-678
X
196-795-678
X
X
X
196-796-678
X
X
X
196-797-678
X
X
X
196-798-678
X
X
X
196-799-678
X
X
X
196-810-678
X
X
196-804-678
PRICES*
X
*Recommended retail price of the manufacturer
11
ACTIVE
cubcadet.eu
FIND THE RIGHT LAWN MOWER
FOR YOUR GARDEN
BAGGING, MULCHING, DISCHARGE?
..............................................................................................................................................................................................
The below chart gives you an overview of the maximum lawn size per cutting width, which you can mow within one hour.
Decide whether you want to collect , mulch or discharge the grass clippings.
Cutting size and cutting method matter! How many m² can you mow in 1 hour?
Collecting:
Example 1, with a cutting width of 42 cm you may mow 600 m² within 1 hour including
10-12 dumps of the grass catcher.
Mulching or Discharge:
Example 2, with a cutting width of 42 cm you may mow 900 m² in 1 hour, when just
mulching or discharging the clippings back to the lawn.
Collecting & Dumping
Mulching or Discharge
1 hour
mowing time
USEFUL TECHNICAL FEATURES WHICH MAKE MOWING EASIER
Large grass bag
A large grass bag reduces the number
of dumping. It saves time and reduces
walks to your compost heap.
Self propelled
Self propelled mowers make mowing on
slopy and large terrain much easier and
effortless. Models with variable speed
even adapt to your personal pace.
Height adjustment
A central height adjustment is a valuable feature to easily change the cutting
height.
High rear wheels
High rear wheels roll over pot holes and
unevenness in the lawn with ease. This
results in a very comfortable handling
and smooth driving.
Electric start
Electric start gives you the highest comfort. Get your lawn mower started with
the turn of a key.
Variable Speed Control
With a variable drive speed system you
will be the pacemaker and not your lawn
mower.
13
PETROL MOWERS
CLASSIC SERIES –
PERFECT CUT AND PERFECT BAGGING
High efficiency combined with the usual high quality of Cub Cadet – this is the strength of the Cub Cadet petrol lawn mowers.
Their tough construction ensures a long life cycle and the Cub Cadet OHV engine delivers the right power for your needs.
With the Cub Cadet CLASSIC SERIES you have the choice between bagging and discharging the clippings. A mulch
kit is available as accessory. Thus, you can optionally also mulch your lawn. Many ergonomical features help to get the
job done while reducing stress – the easy-to-empty grass bag, the ergonomically formed handle, the convenient central
height adjustment and the ball bearing wheels care for a high degree of comfort.
Mowing area in m²/h
CC 42 PO
CC 42 SPO
CC 46 PO
600
650
700
42 cm
42 cm
46 cm
6 positions / central
6 positions / central
6 positions / central
o
o
o
Cutting width
Cutting height adjustment
Cutting height (min-max)
Collecting
–
–
–
Standard
Standard
Standard
Cub Cadet 45 OHV, 140 cm³
Cub Cadet 45 OHV, 140 cm³
Cub Cadet 55 OHV, 159 cm³
2,1 / 2.850
2,1 / 2.850
2,5 / 2.850
Pull
Pull
Pull
Push
Yes, on rear wheels / 1
Push
Speed (max)
–
3,6 km/h
–
Wheels
Mulching plug
Wheels (F/R)
180 mm / 180 mm
180 mm / 200 mm
180 mm / 180 mm
Bagging
Cutting system
Cutting deck (material)
Side discharge
Grass catcher type
60 l
60 l
60 l
Mulching kit 196-587-678
Mulching kit 196-587-678
Mulching kit 196-588-678
11A-LQSC603
12A-LQSC603
11A-TQKC603
Drive
Engine
Rear discharge without collector
Engine
Rated power (kW / min-1)
Starting
Drive / Number of speeds
Double ball bearings
Grass catcher (capacity)
Comfort
Washing nozzle
Handle
Optional accessory
Model number
EAN
Price*
o = available as accessory
– = not available
*Recommended retail price of the manufacturer
ACTIVE
CLASSIC SERIES
Ergonomic handle
Central cutting
height adjustment
Ergonomic handle gives you full
control of the mower with the
most ergonomic hand position. The handle is fully foldable
for space-saving storage and
easy transport. Furthermore,
it is height adjustable to fit the
user’s needs.
It has never been easier to adjust the cutting height. Comfortably change the cutting height
centrally with one lever, with the
choice of 6 different positions.
PUSH
CC 42 PO
CC 46 PO
SELF-PROPELLED
CC 42 SPO
ADDITIONAL FEATURES ON MODEL CC 53 SPO W
CC 46 SPO
Variable drive speed
Front caster wheels
6 drive speeds at your disposal.
The right speed for every situation.
With the caster wheels this
mower gives you the highest
maneouvrability and thus is
perfect when there are many
hindrances on the lawn such
as bushes and trees.
CC 46 SPOE
CC 53 SPO
CC 53 SPO W
FEATURES
.................................
POWERFUL CUB CADET
OHV ENGINE
.................................
DOUBLE BALL BEARING
.................................
ROBUST STEEL DECK
.................................
ERGONOMIC FOLDABLE
HANDLE
.................................
CENTRAL CUTTING
HEIGHT ADJUSTMENT
.................................
CC 46 SPO
750
CC 46 SPOE
CC 53 SPO
CC 53 SPO W
750
950
950
46 cm
53 cm
53 cm
6 positions / central
6 positions / central
6 individual front / central rear
Steel
46 cm
6 positions / central
28 - 92 mm
.................................
CASTER FRONT WHEELS
.................................
Standard
o
ADDITIONAL
FEATURES ON
MODEL CC 53 SPO W
o
o
Standard
–
–
–
Standard
Standard
Standard
Standard
–
Cub Cadet 55 OHV, 159 cm³
Cub Cadet 55 OHV, 159 cm³
Cub Cadet 55 OHV, 159 cm³
Cub Cadet 60 OHV, 195 cm³
2,5 / 2.850
2,5 / 2.850
2,5 / 2.850
3,3 / 2.850
Pull
Electric Start
Pull
Pull
Yes, on rear wheels / 1
Yes, on rear wheels / 1
Yes, on rear wheels / 1
Yes, on rear wheels / 6
3,6 km/h
3,6 km/h
3,6 km/h
2,8 - 4,5 km/h
180 mm / 200 mm
180 mm / 200 mm
200 mm / 200 mm
180 mm / 200 mm
60 l
70 l
70 l
VARIABLE DRIVE SPEED
FROM 2,8 - 4,5 KM/H
.................................
WITH SIDE DISCHARGE
AND MULCHING PLUG
INCLUDED
.................................
Standard
Soft bag
60 l
Standard
Ergonomic, foldable, height adjustable
Mulching kit 196-588-678
Mulching kit 196-588-678
Mulching kit 196-589-678
Mulching kit included
12A-TQKC603
12AETQS7603
12A-PQKC603
12AQC6J3603
cubcadet.eu
15
PETROL MOWERS
BE THE PACEMAKER
WITH OUR NEW MYSPEED MODELS
The all new, intuitive, state-of-the-art handle system of our two new classic models with variable speed let the mower
drive with exactly your personal speed. Just grab the handle, start to walk and see how easy and comfortable mowing
can be. The mower supports and follows exactly your speed. With the additional side discharge option and their high rear
wheels, plus a hard top catcher with fill indicator, these two models set a new standard.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
High wheels
Excellent manoeuvrability is a key factor
on a good lawn mower. High rear wheels
let the mower drive over lush grass and
uneven terrain much smoother and with
less effort.
Hard top bag
with fill indicator
The dust proof hard top catcher with fill
indicator cares for less dust during dry
periods and the fill indicator flap signalizes when the grass catcher is full and
needs to be emptied.
Height adjustable handle
The handle can be matched to your preferred height, providing a stressless and
fatigue-proof mowing in comfort.
RS,
CORNE S.
W
O
R
A
R
ARE
IN N A
SLOW
WIDE
N
O
FA S T
CUB CADET ADVANTAGE.
4 in 1 system
You have the choice of 4 different methods. Bagging, mulching, rear discharge or side discharge. This gives you the
freedom to select the ideal discharge
solution for any condition.
Central cutting
height adjustment
One grip to adjust all four wheels simultaneously. Less effort, less time, comfort
on the highest level.
Easy starting B&S engine
The Briggs & Stratton engines with
ReadyStart® technology and Starting
Guarantee® let you start the mower with
confidence and ease. The engine will
start after 2 pulls. Promised.
ACTIVE
CLASSIC SERIES
My Speed Drive System
The drive system engages once the handle is pushed forward.
If the operator walks faster, the handle is automatically pushed
further forward and thus the speed of the mower increases .
If the operator walkes slower, the handle is pivoting back and
the unit slows down. If the operator stops walking, the lever
automatically moves to neutral and the unit stands still.
SELF-PROPELLED
CC 46 SPB V HW
CC 53 SPB V HW
The mower speed automatically adjusts to the desired
walking speed of the operator.
Tipp: Do not pivot the handle forward to engage the drive
system. Just grap the handle and start to walk. The handle
will then automatically pivot forward and the mower starts to
move forward.
FEATURES
.................................
MYSPEED
INTUITIVE VARIABLE
SPEED DRIVE SYSTEM
NEW
.................................
EXCELLENT BAGGING
AND MULCHING
PERFORMANCE
.................................
FOUR FUNCTIONS IN
ONE MOWER: CHOICE
BETWEEN BAGGING,
MULCHING, SIDE- OR
REAR DISCHARGE
.................................
Mowing area in m²/h
CC 46 SPB V HW
CC 53 SPB V HW
750
950
Comfort
Bagging
Wheels
Drive
Engine
Cutting system
Cutting deck (material)
Steel
Cutting width
46 cm
53 cm
Cutting height adjustment
6 positions / central
Cutting height (min-max)
28 - 92 mm
Collecting
Standard
Mulching plug
Standard
Side discharge
Standard
Rear discharge without collector
Standard
Engine
B&S 575 EX Series, 140 cm³
Rated power (kW / min )
-1
RELIABLE BRIGGS &
STRATTON ENGINE
.................................
MULCHING KIT INCLUDED
.................................
CENTRAL CUTTING
HEIGHT ADJUSTMENT
.................................
GRASS BAG FILL
INDICATOR
.................................
B&S 600 E Series, 150 cm³
2,1 / 2.800
Starting
HIGH REAR WHEELS
.................................
2,2 / 2.800
Pull
Drive / Number of speeds
Yes, on rear wheels / 1
Speed
0 - 3,6 km/h
Wheels (F/R)
180 mm / 280 mm
Double ball bearings
Standard
Grass catcher type
Grass catcher (capacity)
200 mm / 280 mm
Soft bag with hard top
60 l
70 l
Full bag indicator
Standard
Washing nozzle
Standard
Handle
Ergonomic, foldable, height adjustable
Accessory included
Model number
Mulch kit included
12ABTV5E603
12ABPV5L603
EAN
Price*
*Recommended retail price of the manufacturer
cubcadet.eu
17
TRILOY-SERIES
PETROL MOWERS
TRILOY-SERIES
UNIQUE DECK COMPOSED OF THREE MATERIALS
There are many good reasons for buying a Cub Cadet TRILOY series lawn mower. First of all, they are solid. The intelligent
combination of a zinc coated steel mowing deck, aluminium front and rear ends plus polypropylene side impact protector
panels will care for maximum durability. This paired with the Briggs & Stratton ReadyStart® engines and numerous function
and comfort features makes the TRILOY mowers a real premium choice.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
CUB CADET ADVANTAGE.
KEY FEATURES OF THE TRILOY-SERIES
Aluminium front and rear end
The aluminium front and rear end provides the mower with the stiffness of a full size
aluminium chassis.
Quick release system
The ergonomically formed handle is height-adjustable in three positions to fit the user’s
needs. The oversized cone-style toothed quick release system is best in its class and
very comfortable to operate.
Reliable and powerful B&S engine
The strong and reliable Briggs & Stratton ReadyStart® engine with Starting Guarantee
will start after max. 2 pulls. Promised. OHV technique, electronic ignition, improved fuel
management and pressurized lubrication are just some more technical highlights which
make this engine series a first class choice.
Double ball bearings on all four wheels
Reduced rolling resistance and higher durability than sleeve bearings due to high quality
double ball bearings on all four wheels. This is another proof for a premium mower in
every detail, even if they are not visible from outside.
cubcadet.eu
Cub Cadet LV handle system
The innovative Cub Cadet LV low-vibration handle contains a gel of polymers and synthetic hydrocarbons which reduces drastically vibrations on the lawn mower’s handle.
On top of that the upper handle is covered with a soft grip to provide you with the
highest comfort.
Impact absorber system
to prevent damages to the plants and
the mower.
Large opening
The grass bag is easy to empty due to
the swiveling front door. It locks up in fully
closed and fully open position for improved handling.
Large grass bag
The large grass bags with bag capacities
of 75 l (for mowers with 46 cm cutting
width) respectively 80 l (for 53 cm cutting
width) have a dust-tight hard top and a
bag full indicator which informs you as
soon as the grass bag is full and has to
be emptied.
Zinc coated & powder
painted steel deck
The premium quality zinc coated and
powder painted steel cutting deck cares
for maximum durability. The steel body
can overcome stone impacts much better than a full size aluminium deck.
Foldable handle
The handle can quickly and easily be folded up and down for easy and compact
storage.
Easy bag access
The grass bag can be pulled through the
handle bars. This makes it really comfortable to empty the grass bag.
Transmission
The TRILOY-Series lawn mowers are
equipped with a heavy-duty clutchless
transmission with rust-proof aluminium
housing.
High rear wheels
The large 280 mm rear wheels with rubber tread ensure a very easy and comfortable manoeuvrability and excellent
traction even in lush and high grass or
uneven terrain.
BOOSTED AIRFLOW TECHNOLOGY BY CUB CADET
A large fan above the blade, perfectly harmonized
with the cutting deck, the blade and grass catcher,
is creating a much higher airflow than a conventional mower. This ensures a safe and reliable transport of the grass clippings into the grass catcher
even in wet and high grass.
19
Mowing area in m²/h
CC 46 SPB V
CC 46 SPBE V
750
750
46 cm
46 cm
B&S 575 EX Series,
Ready Start, 140 cm³
B&S 675 EX Series,
Ready Start, 190 cm³
Cutting system
Cutting deck (material)
Cutting width
Cutting height adjustment
Cutting height (min-max)
Collecting
Mulching plug
Engine
Rear discharge without collector
Engine
Rated power (kW / min-1)
Bagging
Wheels
Drive
Starting
2,1 / 2.800
2,5 / 2.800
Pull
Electric start
75 l
75 l
12BVK15E603
12BGK18Z603
Drive / Number of speeds
Speed (max)
Wheels (F/R)
Double ball bearings
Grass catcher type
Grass catcher (capacity)
Full bag indicator
Comfort
Washing nozzle
Handle
Soft grip on the handle
Accessory included or optional
Model number
EAN
Price*
*Recommended retail price of the manufacturer
ACTIVE
TRILOY SERIES
SELF-PROPELLED
CC 46 SPB V
CC 46 SPBE V
CC 53 SPB V
CC 53 SPBE V
CC 53 SPB V
CC 53 SPBE V
950
950
Zinc-coated steel / aluminium
53 cm
53 cm
BOOSTED AIRFLOW
TECHNOLOGY
6 positions / central
28 - 92 mm
.................................
Standard
EXCELLENT BAGGING
AND MULCHING
PERFORMANCE
Standard
Standard
B&S 750 EX Series DOV,
Ready Start, 161 cm³
.................................
B&S 750 EX Series DOV,
Ready Start, 161 cm³
2,6 / 2800
2,6 / 2.800
Pull
Electric start
Rear drive / 6
.................................
ALUMINIUM FRONT AND
REAR END
LOW-VIBRATION HANDLE
SYSTEM
200 mm / 280 mm
.................................
POWERFUL BRIGGS &
STRATTON OHV ENGINE
Standard
Soft bag with hard top
.................................
80 l
Standard
Standard
BALL BEARING WHEELS
WITH SOFT RUBBER
TREAD AND HIGH REAR
WHEELS
.................................
Ergonomic, foldable, height adjustable
Standard
Mulching kit included
12BVQ56K603
SOLID, ZINC-COATED
STEEL DECK FOR
MAXIMUM DURABILITY
.................................
2,8 - 4,5 km/h
80 l
FEATURES
.................................
12BGQ56L603
GRASS BAG WITH
HARD TOP – EASY TO
EMPTY THROUGH
LARGE OPENING
.................................
BAG FULL INDICATOR
.................................
SOLID 3-POSITION
HANDLE HEIGHT
ADJUSTMENT
.................................
VARIABLE WHEEL DRIVE
SYSTEM
.................................
MODELS WITH E-START
AVAILABLE
.................................
cubcadet.eu
21
ACTIVE
MULCHING SERIES
PUSH
CC 53 MO
MULCHING MOWER
SELF-PROPELLED
NEW
CC 53 MSPO
FEATURES
.................................
EXCELLENT MULCHING
PERFORMANCE
PLUS THE ABILITY TO
CONVERT TO SIDE
DISCHARGE WITHIN
SECONDS WITHOUT THE
NEED FOR TOOLS
.................................
ERGONOMIC HANDLE
CLEVER AND
ENVIRONMENTALLY CONSCIOUS
Everyone who likes mowing and perfectly grooming his lawn should have a mulching mower as
mulching optimizes the nutrient cycle of the lawn. Our mulching mowers are perfect for the right
lawn care. The grass is cut several times and then equally distributed onto the ground. There it can
be used as a natural green fertilizer. You can save high amounts of fertilizers – this is good for the
environment and for your moneybag, too.
Another benefit of a mulching mower is that there is no collecting or disposal of the grass clippings
needed. You do not have to interrupt your work to empty the grass catcher. Thus, you will save time.
.................................
FULL BAIL LEVERS FOR
ENGINE AND DRIVE
SYSTEM
.................................
DOUBLE BALL BEARINGS
.................................
SIDE DISCHARGE
DEFLECTOR INCLUDED
.................................
FULLY FOLDABLE HANDLE
.................................
CC 53 MO
CC 53 MSPO
1000
Cutting deck (material)
Steel
Cutting width
53 cm
Cutting height adjustment
9 positions / two levers
Cutting height (min-max)
35 - 100 mm
Collecting
–
Mulching plug
Installed
Side discharge
Standard
Engine
Cub Cadet 55 OHV, 159 cm³
Rated power (kW / min-1)
2,5 / 2900
Pull
Yes, on front wheels / 1
Speed (max)
–
3,6 km/h
Wheels (F/R)
180 mm / 200 mm
200 mm / 200 mm
Handle
Drive
Push
Wheels
Starting
Comfort
Engine
Cutting system
Mowing area in m²/h
Drive / Number of speeds
Double ball bearings
Standard
Ergonomic, foldable, height adjustable
Accessory included
Model number
side discharge deflector
11A-A0KC603
EAN
Price*
– = not available
*Recommended retail price of the manufacturer
12A-A0KC603
ACTIVE
WIDE-AREA MOWER
WITH WHEEL DRIVE
WIDE-AREA MOWER
WIDE CUT E-START
POWER AND PERFORMANCE
FOR THE LONG RUN.
To tackle even large properties quickly and with ease – this is what the Cub Cadet Wide Cut E-Start
stands for. It is designed to be heavy-duty but easy to maneuver. With its strong Briggs & Stratton
OHV engine it has the right power for the long run. Supplemented by the wheel drive with four
forward gears and one reverse gear, mowing of even large properties is really fun.
O
Z
ER
FEATURES
.................................
RUGGED 84 CM STEEL
DECK WITH SUPERIOR
MULCHING ABILITY AND
VERY LOW NOISE LEVEL
.................................
INDIVIDUAL CLUTCH
LEVERS FOR CUTTING
DECK AND WHEEL DRIVE
Rugged steel deck
O - T U RN
.................................
LARGE FUEL TANK FOR
HOURS OF CONTINUOUS
OPERATION WITHOUT REFUELLING
.................................
PARKING BRAKE SYSTEM
ON REAR WHEELS
.................................
Comfort
Wheels
Drive
Engine
Cutting system
WIDE CUT E-START
Large fuel tank
4 FORWARD GEARS,
1 REVERSE GEAR
Mowing area in m²/h
2.000
.................................
Cutting deck (material)
Steel
Cutting width
84 cm
CENTRAL CUTTING
HEIGHT ADJUSTMENT
Cutting height adjustment
8 positions/ central
Cutting height (min-max)
25 - 100 mm
Collecting
–
Mulching plug
Standard
Side discharge
Standard
Engine
.................................
Height adjustment
Rated power (kW / min )
6,5 / 2.900
Starting
Electric start
Drive
Rear drive / 4 fwd. / 1 rev.
Speed (max)
1,8 - 5,7 km/h
Wheels (F/R)
200 mm / 400 mm
Double ball bearings
Standard
Washing nozzle
Standard
Handle
.................................
ELECTRIC START
.................................
REINFORCED HANDLE
SYSTEM
B&S 3105 Series OHV, 344 cm³
-1
SWIVEL FRONT WHEELS
AND PNEUMATIC REAR
WHEELS (400 MM)
.................................
Powerful engine
Ergonomic, foldable
Soft grip on the handle
Tank volume
Standard
Comfortable E-Start
7,5 l
Accessory included or optional
Mulch kit included
Model number
12AE764U603
EAN
Price*
– = not available
*Recommended retail price of the manufacturer
Solid handle design
cubcadet.eu
23
COMFORT
cubcadet.eu
FIND THE RIGHT LAWN TRACTOR OR RIDER
FOR YOUR GARDEN
HOW TO CHOOSE THE RIGHT TRACTOR OR RIDER?
..............................................................................................................................................................................................
LAWN SIZE
What is the right deck size for my lawn tractor?
Cub Cadet lawn tractor deck sizes range from 76 cm to 152 cm and the correct deck size greatly depends on the amount
of lawn to be mowed. The information below will help you to choose the right deck size for your needs.
Cutting size and cutting method matter! How many m² can you mow in 1 hour?
Collecting:
Example 1, with a cutting width of 76 cm you may mow 1.400 m² within 1 hour including
7-8 dumps of the grass catcher.
Mulching or Discharge:
Example 2, with a cutting width of 76 cm you may mow 2.000 m² in 1 hour.
Collecting & Dumping
Mulching or Discharge
1 hour
mowing time
THE DIFFERENT TYPES OF DRIVE SYSTEMS
TRANSMISSION
The Transmatic transmission allows shift-on-the-go speed control. Simply choose the driving
direction, set the desired basic speed with the speed shift lever on the dashboard and release
the brake/clutch pedal. Push the pedal to slow down or press it full way forward to stop. By
releasing the brake pedal, the tractor automatically resumes your preset speed.
TRANSMISSION
The AutoDrive™ transmission is maintenance free. It can be compared with the automatic
transmission of a car. The speed can simply be adjusted with the foot pedal. With the gear
selector lever you simply choose forward or reverse direction. You don’t have to bother with
clutching. Both hands remain on the steering wheel.
TRANSMISSION
700 Series
Side discharge
700 Series
Rear discharge
1000 Series
Side/rear discharge
The Hydrostatic transmission impresses by means of modern technology and luxury. Because of its self-lubricating hydro pump, it is of low maintenance and extremely sturdy.The
particular feature of the Hydrostatic transmission is that you can control velocity as well as the
forward and reverse speed continuously. No clutching or shifting is required. It offers a very
smooth and exact drive. The 1000 Series lawn tractors are foot-pedal controlled, the 700
Series lawn tractors have either hand control (side discharge) or a foot pedal (rear discharge).
25
MINI-RIDER
TRULY UNIQUE. TRULY COMPACT.
MOW YOUR LAWN WHILE SITTING IN COMFORT.
Modern design, versatility and comfortable mowing – just three of many assets of the Cub Cadet MINI-RIDER. The
compact and manoeuvrable Cub Cadet MINI-RIDER models with electric start are equipped with a powerful 420 cm³
Cub Cadet engine. Thanks to their space-saving design, these Cub Cadet MINI-RIDER models do not need much more
space in your garage than a conventional walk behind mower. If you want the grass clippings to be collected, discharged
or mulched, the Cub Cadet CC 114 TA will be your choice. If you are looking for an excellent mulching mower with the
oportunity to side-discharge the clippings the new CC 114 TD is the perfect choice.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
CUB CADET ADVANTAGE.
KEY FEATURES OF THE MINI-RIDERS
Transmatic transmission
The Transmatic transmission allows shift-on-the-go speed control. Simply choose the
driving direction, set the desired basic speed and start mowing. On the Cub Cadet
ride-on mower CC 114 TA, you have the choice of 6 forward and 6 reverse speeds.
76 cm mowing deck
You have the choice between collecting, mulching and discharge with model CC 114 TA. Choice between mulching and
side discharge with model CC 114 TD. Superior mulching, excellent collection and for spreading side discharge ability.
What- ever you choose, the MINI-RIDER can handle it.
420 cm³ Cub Cadet OHV engine
The powerful and reliable single cylinder Cub Cadet engine has more than enough reserves to provide you with sufficient
power under any condition. The overhead valve technology, cast iron cylinder, ball bearings on the crankshaft, electronic
ignition and many other state-of-the-art features make this engine a long-life and strong heart of the MINI-RIDER.
cubcadet.eu
Large tires
Telescoping
steering column
Gentle to your lawn and smoother on
uneven terrain.
The soft-grip steering wheel gives maximum comfort. The steering shaft is
height adjustable to suit operators of any
height.
Adjustable seat
Step-through frame
With the adjustable seat the MINI-RIDER
can be matched to your personal and
most convenient seating position.
with soft rubber foot pads, for easy access and comfortable foot rest.
4,9 l fuel tank
The large fuel tank with fuel indicator gives you the freedom to mow your lawn in
one full cycle without a tankstop.
Cutting height adjustment
& PTO clutch
The cutting height can easily be adjusted
in 5 positions from 38 mm to 95 mm and
with the individual deck clutch lever the
cutting deck can be switched on and off.
Both levers are located ergonomically on
the right side of the seat.
Narrow turning radius
46
for even better manoeuvrability
cm
200 l grass bag
with hard top (model CC 114 TA), grips
and fill indicator. It can be dumped from
the driver�s seat.
27
MINI-RIDER
Cutting deck
Mowing area in m²/h
CC 114 TD
CC 114 TA
> 1.200
> 1.000
Cutting width
76 cm
Cutting height
38 - 95 mm
Number of blades
1
Deck engagement
Manual lever control
Deck height positions
5
Wash nozzle
Standard
Mulching plug
Standard
Discharge system
Drive
Engine
Engine type
Cub Cadet OHV
Cylinders
single
Engine size
420 cm³
Rated power (kW / min-1)
8,2 / 2.900
Tank volume
4,9 l
Transmission
Transmatic
Speeds
6, shift-on-the-go
Control
Foot pedal control
Accessory (19A30014OEM) 115 l
200 l
Bag lever
Bag capacity
–
2 fixed grips
Hardtop
–
Standard
Bag full indicator
–
Standard
Grass deflector
Standard
Front axle
Steel
Frame
Front bumper
–
Standard
Turning radius
46 cm
Wheel size (front/rear)
13" x 5" / 16" x 6,5"
Wheel bearings
Sleeve bearings
Easy entry frame
Standard
Comfort
Seat type
Medium back
Seat adjustment
Screw
Steering wheel / steering column
Comfort / 3 step height adjustable
Battery charger
Accessory (196-967-678)
L x W x H (approx.)
157 cm x 98 cm x 112 cm,
width without deflector: 86 cm
Weight (approx.)
Model number
EAN
Price*
– = not available
*Recommended retail price of the manufacturer
225 cm x 86 cm x 112 cm,
length without bag: 157 cm
127 kg
145 kg
13B226JD603
13B226HD603
COMFORT
MINI-RIDER
SIDE DISCHARGE
CC 114 TD
REAR DISCHARGE
CC 114 TA
FEATURES
.................................
COMPACT AND
MANOEUVRABLE
.................................
200 L GRASS BAG WITH
HARD-TOP &
FILL INDICATOR
(MODEL CC 114 TA)
.................................
CHOICE BETWEEN
COLLECTING, DISCHARGE
AND MULCHING
.................................
STEP-THROUGH FRAME
.................................
LARGE GRASS-GENTLE
TIRES
.................................
FRONT BUMPER
.................................
46 CM TURNING RADIUS
ONLY
.................................
SHIFT-ON-THE-GO
TRANSMATIC
TRANSMISSION
.................................
FITS THROUGH GARDEN
DOORS AND EVEN FITS
ON SMALL TRAILERS WITH
100 CM WIDTH
.................................
SUSPENDED SEAT
.................................
cubcadet.eu
29
700 SERIES
SIDE DISCHARGE
ENJOYABLE EXPERIENCE.
PROGRESSIVE FEATURES.
Cub Cadet 700 Series lawn tractors with side discharge are extraordinary versatile. Their main feature is the ability to
quickly cover large areas. No stopping is needed to empty the grass catcher – quite the contrary – you can mow a large
area within a short time. Thanks to the easy-to-operate cutting height adjustment, Cub Cadet 700 Series lawn tractors
with side discharge will achieve optimum cutting results – even on difficult ground. Furthermore, it is easy to attach
accessories such as snow blades, lawn rollers or dump carts.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
CUB CADET ADVANTAGE.
RevTEK Technology
RevTEK – Reverse Mowing Technology. To mow in reverse, when no kids or animals are around.
This cares for more safety.
Pivoting one-piece hood
Comfort Steering wheel
The entire motor hood can be removed
within seconds without the need for
tools, for easy maintenance.
Pivoting steel or cast iron
front axle
This keeps all four wheels on the ground
also on uneven surface.
Step-through frame
The sturdy step-through frame allows
the user to mount or dismount the tractor with ease.
Cutting height adjustment
5-position height adjustment to easily
change the cutting height (30 - 95 mm).
A nice 3-spoke soft grip steering wheel is
standard on all our tractors.
Narrow turning radius
46
cm
For better manoeuvrability and having
the job done faster.
Steel frame
All tractor frames are made of fully welded and powder coated rugged steel.
Adjustable seat
For more convenience and comfort.
COMFORT
700 SERIES
SIDE DISCHARGE
CC 714 TF
CC 714 HF
CC 717 HG
Mowing area in m²/h
Cutting deck
Cutting width
CC 714 HF
CC 717 HG
> 1.500
> 1.500
> 2.000
96 cm
96 cm
107 cm
Cutting height
30 - 95 mm
Number of blades
2
Deck engagement
Manual lever control
Deck height positions
5
Deck wheels
2
Mulching plug
Engine type
Engine
CC 714 TF
Standard
Standard
Cub Cadet OHV
Cub Cadet OHV
B&S Intek
Cylinders
single
Engine size
Rated power (kW / min )
-1
420 cm³
420 cm³
500 cm³
7,8 / 2.800
7,8 / 2.800
9,5 / 2.800
3,8 l
Drive
Transmission
Discharge
system
2 CUTTING WIDTHS
AVAILABLE:
96 CM AND 107 CM
.................................
MODELS WITH
COMFORTABLE
HYDROSTATIC DRIVE
AVAILABLE
.................................
NARROW TURNING
RADIUS (46 CM)
Transmatic
Hydrostatic
Hydrostatic
Speeds
7, shift-on-the-go
Infinitely variable
Infinitely variable
Control
Foot-pedal control
Manual lever control
Manual lever control
–
Yes
Yes
.................................
Accessory (196-180A699)
Accessory (196-180A699)
Accessory (OEM-190-180A)
PIVOTING STEEL OR CAST
IRON FRONT AXLE
(DEPENDING ON MODEL)
Cruise control
Bag
Grass deflector
Standard
Front axle
Front bumper
Frame
REVTEK TECHNOLOGY
.................................
Accessory (OEM-190-116)
Tank volume
Steel
Cast-iron
Cast-iron
Accessory (OEM-196A603)
Standard
Standard
Turning radius
Wheel size (front/rear)
Sleeve bearings
Easy entry frame
Standard
Seat adjustment
LARGE GRASS-GENTLE
PNEUMATIC TIRES
SUSPENDED SEAT
High back
High back
Screw
Quick adjuster lever
Quick adjuster lever
.................................
EXCELLENT MULCHING
RESULTS
.................................
Comfort
Mow in Reverse (RevTEK)
.................................
.................................
Medium back
Steering wheel
POWDER COATED
STEEL FRAME
COMFORTABLE
STEERING WHEEL
15" x 6" / 20" x 8"
Wheel bearings
.................................
.................................
46 cm
Seat type
Comfort
FEATURES
.................................
Standard
Battery charger
Accessory (196-967-678)
L x W x H (approx.)
Weight (approx.)
Model number
170 cm x 107 cm x 100 cm,
width with deflector: 130 cm
170 cm x 107 cm x 100 cm,
width with deflector: 130 cm
170 cm x 115 cm x 100 cm,
width with deflector: 139 cm
150 kg
150 kg
175 kg
13H277DF603
13H279DF603
13HD79DG603
EAN
Price*
– = not available
*Recommended retail price of the manufacturer
cubcadet.eu
31
700 SERIES
REAR DISCHARGE
CUT AND COLLECT
FOR A CLEAN RESULT.
Whether on smooth, spacious lawns or smaller, uneven grounds – Cub Cadet 700 Series lawn tractors with rear discharge
ensure a clean and even cut. Features like the sturdy step-through frame which allows easily mounting or dismounting
the tractor, the ergonomically designed dash board and the comfortable steering wheel make mowing really convenient
and fun.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
CUB CADET ADVANTAGE.
Direct collect
All our rear discharge tractors are designed to transport
the grass clippings into the grass catcher in the shortest
way. All 700 SERIES rear discharge models feature a 240 L
grass catcher. They are made of durable fabric for flexibility
and for air passage to guarantee the air flow and perfect
collection. The hard top controls dust and reduces noise.
The convenient handle makes emptying from the operator
seat comfortable and easy.
Adjustable seat
RevTEK Technology
For more convenience and comfort.
RevTEK – Reverse Mowing Technology: To mow in reverse, when no kids or
animals are around. This cares for more
safety.
Comfort steering wheel
Pivoting one-piece hood
A nice 3-spoke soft grip steering wheel is
standard on all our tractors.
The entire motor hood can be removed
within seconds without the need for
tools, for easy maintenance.
Deck wash nozzle
Pivoting steel or cast iron
front axle
To clean the cutting deck from underneath comfortably without getting muddy (on selected models).
This keeps all four wheels on the ground
also on uneven surface.
Narrow turning radius
Step-through frame
The sturdy step-through frame allows
the user to mount or dismount the tractor with ease.
46
cm
For better manoeuvrability and having
the job done faster.
COMFORT
700 SERIES
REAR DISCHARGE
CC 714 TE
CC 714 HE
CC 714 TE
CC 714 HE
Cutting deck
Mowing area in m²/h
> 1.500
Cutting width
92 cm
Cutting height
30 - 95 mm
Number of blades
2
Deck engagement
Manual lever control
Deck height positions
5
Deck wheels
2
Wash nozzle
Standard
Mulching plug
Engine
Cylinders
Drive
.................................
single
Engine size
NARROW TURNING
RADIUS OF 46 CM ONLY
420 cm³
Rated power (kW / min-1)
7,8 / 2.800
7,3 / 2.600
3,8 l
.................................
POWDER COATED
STEEL FRAME
Transmatic
Hydrostatic
.................................
Speeds
7, shift-on-the-go
Infinitely variable
Control
Foot-pedal control
Dual direction foot-pedal control
PIVOTING STEEL OR CAST
IRON FRONT AXLE
(DEPENDING ON MODEL)
Transmission
Discharge system
1 MODEL WITH
COMFORTABLE
HYDROSTATIC DRIVE
AVAILABLE
Cub Cadet OHV
Tank volume
Bag capacity
.................................
240 l
Bag lever
Telescopic handle
Hardtop
LARGE GRASS-GENTLE
PNEUMATIC TIRES
Plastic
Anti clog system
Overflow
Grass deflector
Accessory (196-750-678)
Front axle
Front bumper
Frame
REVTEK TECHNOLOGY
.................................
Accessory (196-749-678)
Engine type
Accessory (OEM-196A603)
Standard
46 cm
Sleeve bearings
Easy entry frame
Standard
High back
Screw
Quick adjuster lever
Comfort
Mow in Reverse (RevTEK)
Standard
Battery charger
SUSPENDED SEAT
.................................
.................................
Medium back
Steering wheel
.................................
GRASS CATCHER CAN
BE DUMPED FROM THE
DRIVER’S SEAT
15" x 6" / 18" x 9,5"
Wheel bearings
Accessory (196-967-678)
225 cm x 99 cm x 103 cm,
length without bag: 195 cm
L x W x H (approx.)
Weight (approx.)
Model number
COMFORTABLE
STEERING WHEEL
Cast-iron
Wheel size (front/rear)
Seat adjustment
.................................
Steel
Turning radius
Seat type
Comfort
FEATURES
.................................
195 kg
13H277DE603
13H271DE603
EAN
Price*
*Recommended retail price of the manufacturer
cubcadet.eu
33
1000 SERIES
SIDE DISCHARGE
A CLASS OF ITS OWN.
EFFICIENCY MADE COMFORTABLE.
Nothing makes cutting grass as comfortable as the Cub Cadet 1000 Series lawn tractors. Many comfortable features – like
a storage place for your mobile phone, your garden gloves or a tool set, a cup holder for beverages, the cruise control or
the fact that the operating functions can be activated with minimum effort – make the work much easier. The professional
grade engines provide the power you need day in and day out. Sit down on the pillowy high back seat and grab the soft
grip steering wheel and you already feel the difference. No more hard garden work, this is fun to ride.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
Tighter turning radius
40
cm
Cub Cadet 1000 Series lawn tractors
have an ultra-tight turning radius of only
40 cm for remarkable manoeuvrability.
Seat adjustment
Comfortable 10-position seat adjustment lever on the left side for easy access. With 16,5 cm of seat travel these
tractors are industry leading in driver's
comfort.
Fully welded steel frame
The especially thick frame allows for
more stiffness and reduced vibrations.
Cleaner cut
The advanced cutting system features a
wide discharge chute and a deep deck
for optimal grass lift and mulching capability.
Deck engagement
The deck engagement lever next to the
cutting height adjustment lever care for
ergonomical handling. Selected models
even come with electro-magnetic clutch.
CUB CADET ADVANTAGE.
RevTEK Technology
RevTEK – Reverse Mowing Technology: To mow in reverse, when no kids or
animals are around. This cares for more
safety.
Pivoting one-piece hood
The entire motor hood can be removed
within seconds without the need for
tools, for easy maintenance.
12-position
height adjustment
with memory indicator. More freedom to
find the ideal cutting height perfectly suited to your demands.
Cruise control/
Parking brake
With this lever you can set a cruise
speed when driving and set the parking
brake when the tractor is not in motion.
Anti-scalping deck
wheels
to prevent damage to the turf especially
on tight turns
cubcadet.eu
Tool box with cover
To safely store your personal belongings
i.e. a cell phone, secateurs, gloves, sun
glasses, etc. (on selected models)
Individual foot pedals
for forward and reverse (on selected models).
Fuel tank and fuel window
The extra large 10 l fuel tank can easily
be filled from the side; there is no need
to open the hood. The angled fuel neck
prevents fuel spilling. Thanks to the fuel
window at the dashboard, you can comfortably control the fuel level from the
driver´s seat.
Step-through frame
to mount or dismount the tractor with
ease and comfort.
Front bumper
Prevents your investment from damages
and thanks to the Fast Attach™ system
you can replace the bumper with i.e. a
dozer blade within minutes with no tools
required.
Deck wash nozzle
The deck wash nozzle allows to easily
attach a hose lock type fitting directly to
the deck to flush water in. The fitting is
angled to ensure an even distribution of
water to fully clean the deck. (on selected models)
FURTHER FEATURES OF THE MODELS CC 1022 KHT AND CC 1224 KHP
New Kohler
7000 series engine
These tractors are equipped with powerful Kohler OHV twin-cylinder engines
with 725 cm³. Move torque and premium specs. They provide more torque
and professional grade features.
Comfortable E-PTO
deck engagement
The electro-magnetic fingertip deck engagement provides highest user comfort.
35
1000 SERIES
SIDE DISCHARGE
CC 1016 AF
CC 1019 HG
> 1.500
> 2.000
96 cm
107 cm
Number of blades
2
2
Deck engagement
Manual lever control
Manual lever control
Deck wheels
2 anti scalp
4 anti scalp
Wash nozzle
–
Standard
B&S Intek
B&S Intek
single
single
Mowing area in m²/h
Cutting width
Cutting deck
Cutting height
Deck height positions
Mulching plug
Engine
Engine type
Cylinders
Engine size
500 cm³
500 cm³
9,2 / 2.800
9,4 / 2.800
AutoDriveTM
Hydrostatic
Foot-pedal control
Dual direction foot-pedal control
Accessory (196-180A699)
Accessory (OEM-190-180A)
Standard
Standard
15" x 6" / 20" x 8"
15" x 6" / 20" x 8"
Sleeve bearings
Sleeve bearings
–/–
–/–
172 cm x 107 cm x 110 cm,
width with deflector: 130 cm
172 cm x 115 cm x 116 cm,
width with deflector: 139 cm
Rated power (kW / min-1)
Tank volume
Drive
Transmission
Speeds
Control
Discharge
system
Cruise control
Bag
Grass deflector
Front axle
Frame
Front bumper
Turning radius
Wheel size (front/rear)
Wheel bearings
Easy entry frame
Seat type
Comfort
Seat adjustment
Steering wheel
Tool box / 12 V plug
Mow in Reverse (RevTEK)
Battery charger
Hour meter & service minder
L x W x H (approx.)
Weight (approx.)
Model number
215 kg
225 kg
13BD90AF603
13BJ93AG603
EAN
Price*
– = not available
*Recommended retail price of the manufacturer
COMFORT
NEW
NEW
NEW
1000 SERIES
SIDE DISCHARGE
CC 1016 AF
CC 1019 HG
CC 1018 BHG
CC 1022 KHT
CC 1018 BHG
CC 1022 KHT
CC 1224 KHP
> 2.000
> 3.000
> 5.000
107 cm
117 cm
127 cm
2
2
3
Electro-magnetic
Electro-magnetic
Electro-magnetic
4 anti scalp
4 anti scalp
4 anti scalp
Standard
Standard
Standard
B&S Intek
Kohler 7000 Series
Kohler 7000 Series
V-Twin
V-Twin
V-Twin
656 cm³
725 cm³
725 cm³
10,5 / 2.500
14,1 / 2.400
16,9 / 3.000
Hydrostatic
Hydrostatic
Dual direction foot-pedal control
Dual direction foot-pedal control
CC 1224 KHP
30 - 90 mm
12
Standard
13 l
Hydrostatic
Infinitely variable
Dual direction foot-pedal control
FEATURES
.................................
96, 107 AND 117 CM
TWIN-BLADE DECKS AND
127 CM TRIPLE-BLADE
DECK AVAILABLE
.................................
HEAVY-DUTY
STEEL FRAME
.................................
LARGE FUEL TANK AND
FUEL WINDOW,
EASY FILLING – NO NEED
TO OPEN THE HOOD
.................................
PADDED FOOT RESTS
Standard
.................................
Accessory (OEM-190-180A)
Accessory (19A30003OEM)
Accessory (19A40002OEM)
CAST IRON FRONT AXLE
.................................
Standard
ANTI-SCALPING DECK
WHEELS
Cast-iron
Deluxe
Deluxe
Deluxe
15" x 6" / 20" x 8"
15" x 6" / 20" x 8"
16" x 6,5" / 23" x 10,5"
Ball bearings
Ball bearings
Ball bearings
40 cm
Standard
.................................
LARGE GRASS-GENTLE
PNEUMATIC TIRES
.................................
FULL LINE OF
ATTACHMENTS AND
ACCESSORIES AVAILABLE
High back
.................................
Quick adjuster lever
.................................
SUSPENDED SEAT
Comfort
Standard / –
Standard / –
Standard / –
Standard
FURTHER FEATURES
ON MODEL
CC 1224 KHP
.................................
Accessory (196-967-678)
Standard
172 cm x 115 cm x 116 cm,
width with deflector: 139 cm
172 cm x 124 cm x 116 cm,
width with deflector: 144 cm
194 cm x 136 cm x 114 cm,
width with deflector: 155 cm
225 kg
225 kg
235 kg
13HT93AG603
13HP93AT603
14HQ94AP603
LARGE 23" X 10,5" REAR
TIRES AND 16" X 6,5"
FRONT TIRES
.................................
POWERFUL 24 HP
KOHLER V-TWIN
OHV ENGINE
.................................
GARDEN TRACTOR FEATURES ON MODEL CC 1224 KHP
Large tires
Large 23" x 10,5" rear and
16" x 6,5" front wheels
give you the safety and
confidence you demand
from a real garden tractor.
Cutting system
Large 127 cm tripple blade
cutting deck with excellent
mulching function.
cubcadet.eu
37
1000 SERIES
REAR DISCHARGE
CUTTING IN ITS MOST
LUXURIOUS WAY.
When there are large areas to be mowed and long mowing times are needed, more convenience is desirable. Cub Cadet
1000 Series lawn tractors with rear discharge deliver unparalleled comfort and a premium cut every time. An easy handling
of the bag despite a large grass bag volume, an acoustic signal which sounds as soon as the bag is full and has to be
emptied, low vibration, quiet engines, large pneumatic tires, a high back luxury seat and soft grip steering wheel – these
are only a few of many benefits which make mowing much more comfortable and stressless.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
Tighter turning radius
40
cm
Cub Cadet 1000 Series lawn tractors
have an ultra-tight turning radius of only
40 cm for remarkable manoeuvrability.
Seat adjustment
Comfortable 10-position seat adjustment
lever on the left side for easy access and
quick adjustment. With 16,5 cm of seat
travel these tractors are industry leading
in driver's comfort.
Fully welded steel frame
The especially thick frame allows for
more stiffness and reduced vibrations.
Easy removal
of the grass bag
You only have to pull the knob on top of
the fender, and then the bag sinks softly
to the ground.
Luxury high back seat
The pillowy seat with its high back lets
you sit in highest comfort even on a long
run.
CUB CADET ADVANTAGE.
RevTEK Technology
RevTEK – Reverse Mowing Technology: To mow in reverse when no kids or
animals are around. This cares for more
safety.
Pivoting one-piece hood
The entire motor hood can be removed
within seconds without the need for
tools, for easy maintenance.
12-position
height adjustment
with memory indicator. More freedom to
find the ideal cutting height perfectly suited to your demands.
Cruise control/
Parking brake
With this lever you can set a cruise
speed when driving and set the parking
brake when the tractor is not in motion.
for setting constant travelling speed
Anti-scalping deck
wheels
to prevent damages to the turf especially
on tight turns
cubcadet.eu
Soft grip steering wheel
Standard on all models.
Front bumper
Prevents your investment from damages
and thanks to the Fast Attach™ system
you can replace the bumper with i.e. a
dozer blade within minutes with no tools
required.
Step-through frame
to mount or dismount the tractor with
ease and comfort.
Deck wash nozzle
The deck wash nozzle allows to easily
attach a hose lock type fitting directly to
the deck to flush water in. The fitting is
angled to ensure an even distribution of
water to fully clean the deck.
Fuel tank and fuel window
The extra large 10 l fuel tank can easily be filled from the side; there is no need to open the hood. The angled fuel neck
prevents fuel spilling. Thanks to the fuel window at the dashboard, you can comfortably control the fuel level from the
driver´s seat.
Clean out system
Pulling a lever on the right side of the seat, the chute opens in the
area of the deck and the clogged grass can fall out. The grass on
the rear plate and on the bag full indicator is pushed into the grass
bag. This clean out system can be operated while the blades are
running. It is also perfect in combination with the deck wash nozzle
as the grass will not end up in the bag. The overflow will be closed.
The result is a better collection of light debris and autumn leafs.
CLEAN OUT CLOSED
CLEAN OUT OPEN
FURTHER FEATURES OF MODELS CC 1018 BHE, CC 1020 BHN AND CC 1024 KHN
Acoustic bag full indicator
The acoustic bag full indicator sounds when the bag is full and needs to be emptied. This indicator can be adjusted according to changing grass conditions.
Tool box
Tool box with integrated 12 V power outlet.
Deluxe battery charger
These models have a deluxe battery
charger for winter trigger charging included.
EXTRA FEATURES OF MODEL CC 1024 KHN
New Kohler 7000 series engine
These tractors are equipped with powerful Kohler OHV twin-cylinder engines with 725 cm³.
Move torque and premium specs. They provide more torque and professional grade features.
Electric bag opener
Lift the grass catcher with the push of a button at the highest level of comfort.
39
1000 SERIES
REAR DISCHARGE
Mowing area in m²/h
Cutting width
CC 1016 AE
CC 1018 HE
CC 1018 AN
CC 1019 HN
> 1.500
> 1.500
> 2.000
> 2.000
92 cm
92 cm
105 cm
105 cm
B&S Intek
B&S Intek
B&S Intek
B&S Intek
single
single
single
single
Cutting deck
Cutting height
Number of blades
Deck engagement
Deck height positions
Deck wheels
Wash nozzle
Mulching plug
Engine
Engine type
Cylinders
Engine size
Rated power (kW / min-1)
500 cm³
500 cm³
500 cm³
500 cm³
8,3 / 2.400
8,4 / 2.400
8,4 / 2.400
8,5 / 2.400
AutoDriveTM
Hydrostatic
AutoDriveTM
Hydrostatic
Foot-pedal control
Dual direction foot-pedal control
Foot-pedal control
Dual direction foot-pedal control
Tank volume
Drive
Transmission
Speeds
Control
Cruise control
Discharge system
Bag capacity
Bag lever
280 l
280 l
350 l
350 l
Telescopic handle
Telescopic handle
Telescopic handle
Telescopic handle
–
–
–
–
Standard
Standard
Standard
Standard
Sleeve bearings
Sleeve bearings
Sleeve bearings
Sleeve bearings
–/–
–/–
–/–
–/–
Accessory (196-967-678)
Accessory (196-967-678)
Accessory (196-967-678)
Accessory (196-967-678)
242 cm x 99 cm x 112 cm,
length without bag: 193 cm
242 cm x 99 cm x 112 cm,
length without bag: 193 cm
250 cm x 111 cm x 112 cm,
length without bag: 193 cm
250 cm x 111 cm x 112 cm,
length without bag: 193 cm
Hardtop
Bag full indicator
Anti clog system
Grass deflector
Front axle
Frame
Front bumper
Turning radius
Wheel size (front/rear)
Wheel bearings
Easy entry frame
Seat type
Comfort
Seat adjustment
Steering wheel
Tool box / 12 V plug
Mow in Reverse (RevTEK)
Battery charger
Hour meter & service minder
L x W x H (approx.)
Weight (approx.)
Model number
219 kg
227 kg
227 kg
240 kg
13HD90AE603
13HD91AE603
13HD90AN603
13HJ91AN603
EAN
Price*
– = not available
*Recommended retail price of the manufacturer
COMFORT
NEW
NEW
NEW
1000 SERIES
REAR DISCHARGE
CC 1016 AE
CC 1018 HE
CC 1018 AN
CC 1019 HN
CC 1018 BHE
CC 1020 BHN
CC 1018 BHE
CC 1020 BHN
CC 1024 KHN
> 1.500
> 2.000
> 2.000
92 cm
105 cm
105 cm
20 - 120 mm
FEATURES
2
.................................
Manual lever control
92 AND 105 CM
TWIN-BLADE DECKS
12
.................................
4 large wheels
HEAVY-DUTY FULLY
WELDED STEEL FRAME
Standard
.................................
Accessory (196-751-678)
B&S Intek
B&S Intek
Kohler 7000 Series
V-Twin
V-Twin
V-Twin
656 cm³
656 cm³
725 cm³
10,5 / 2.500
13,2 / 2.400
14,5 / 2.400
Hydrostatic
Hydrostatic
Dual direction foot-pedal control
Dual direction foot-pedal control
Infinitely variable
Dual direction foot-pedal control
280 l
350 l
350 l
Telescopic handle
Telescopic handle
Electric lift
Standard
Standard
Steel
Standard
Deluxe
Deluxe
40 cm
Ball bearings
Ball bearings
Standard
Quick adjuster lever
COMFORTABLE
10-POSITION SEAT
ADJUSTMENT
.................................
.................................
FURTHER
FEATURES OF
THE MODELS
WITH 2-CYLINDER
ENGINE
ELECTRIC BAG LIFTER
ON CC 1024 KHN
Comfort
Standard / Standard
Standard / Standard
Standard
Standard
Standard
Standard
242 cm x 99 cm x 112 cm,
length without bag: 193 cm
LARGE PNEUMATIC TIRES
.................................
.................................
High back
Standard
4 ANTI-SCALPING
DECK WHEELS
SUSPENDED SEAT
15" x 6" / 20" x 8"
Standard / Standard
CAST IRON FRONT AXLE
.................................
CRUISE CONTROL
Cast-iron
Ball bearings
DECK WASH SYSTEM
.................................
Accessory (196-972A678)
Deluxe
.................................
.................................
Standard
Standard
LARGE FUEL TANK AND
FUEL WINDOW, EASY
FILLING – NO NEED TO
OPEN THE HOOD
.................................
10 l
Hydrostatic
CC 1024 KHN
250 cm x 111 cm x 112 cm, length without 250 cm x 111 cm x 112 cm, length without
bag: 193 cm
bag: 193 cm
227 kg
240 kg
242 kg
13HT91AE603
13HT91AN603
13HQ91AN603
.................................
BATTERY CHARGER
(INCLUDED) FOR TRIGGER
CHARGE DURING WINTER
.................................
TOOL BOX WITH 12 VOLT
OUTLET
.................................
ACOUSTIC BAG FULL
INDICATOR
.................................
cubcadet.eu
41
1000 SERIES
HIGH GRASS MOWER
NEW
A SPECIAL TRACTOR
FOR SPECIAL NEEDS.
The Cub Cadet 1000 Series lawn tractor with high-grass cutting deck is made to mow even high grass like meadows and
extensive orchards. The infinitely variable hydrostatic transmission together with the cruise control allows for convenient
working.With the chevron style rear wheels you have a reliable traction even in muddy condition or on excessive slopes.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
High grass cutting deck
The particularly high grass cutting deck
is designed to mulch down high grass on
meadows and orchards with ease.
New Kohler
7000 series engine
These tractors are equipped with powerful Kohler OHV twin-cylinder engines
with 725 cm³. Move torque and premium specs. They provide more torque
and professional grade features.
Agricultural tires
Chevron style rear tires allow for better
grip on difficult mowing areas.
CUB CADET ADVANTAGE.
COMFORT
1000 SERIES
HIGH GRASS MOWER
CC 1022 KHI
Cutting deck
Mowing area in m²/h
Cutting width
92 cm
Cutting height
65 - 105 mm
Number of blades
2
Deck engagement
Manual lever control
Engine
8
Deck wheels
2
Engine type
Kohler 7000 Series
Cylinders
The Cub Cadet 1000 Series lawn tractor with
high-grass cutting deck has an ultra-tight turning radius of only 40 cm for remarkable manoeuvrability.
725 cm³
Rated power (kW / min-1)
14,1 / 2.400
Hydrostatic
Speeds
Infinitely variable
Control
Dual direction foot-pedal control
Cruise control
Standard
Front axle
Cast-iron
Front bumper
Deluxe
Turning radius
40 cm
Wheel size (front/rear)
FEATURES
.................................
10 l
Transmission
Drive
Tight turning radius
V-Twin
Engine size
Tank volume
Frame
CC 1022 KHI
> 1.500
Deck height positions
Tool box
Tool box with integrated 12 V power outlet
Ball bearings
Easy entry frame
Standard
Seat type
High back
Steering wheel
Tool box / 12 V plug
FABRICATED HIGH GRASS
MULCHING DECK
.................................
HEAVY-DUTY
STEEL FRAME
.................................
LARGE FUEL TANK AND
FUEL WINDOW, EASY
FILLING – NO OPENING OF
THE HOOD NEEDED
15" x 6" / 18" x 9,5", Agricultural tires
Wheel bearings
Seat adjustment
Comfort
40
cm
RevTEK Technology
RevTEK – Reverse Mowing Technology: To
mow in reverse when no kids or animals are
around. This cares for more safety.
Quick adjuster lever
.................................
PADDED FOOT RESTS
.................................
CAST IRON FRONT AXLE
.................................
COMFORTABLE
10-POSITION SEAT
ADJUSTMENT, LEVER ON
THE LEFT SIDE FOR EASY
ACCESS
Comfort
Standard / Standard
Mow in Reverse (RevTEK)
Standard
Battery charger
Standard
.................................
Hour meter & service minder
Standard
REVTEK, REVERSE
MOWING TECHNOLOGY
L x W x H (approx.)
Weight (approx.)
Model number
EAN
Price*
*Recommended retail price of the manufacturer
185 cm x 98 cm x 110 cm
240 kg
13HP91AI603
Fuel tank and fuel window
The extra large 10 l fuel tank can easily be filled
from the side; there is no need to open the
hood. The angled fuel neck prevents fuel spilling. Thanks to the fuel window at the dashboard, you can comfortably control the fuel
level from the driver´s seat.
.................................
BATTERY CHARGER FOR
FLOAT CHARGE DURING
WINTER
.................................
CHEVRON TIRES ON THE
REAR AXLE FOR MAXIMUM
TRACTION
.................................
SUSPENDED SEAT
.................................
cubcadet.eu
43
2000 SERIES
SIDE DISCHARGE
"Garden tractor
of the year 2012"
38
cm
Model shown with optional cutting deck.
MEET THE GARDEN TRACTOR
THAT TAKES A BEATING – WITHOUT RETURNING THE FAVOR.
The Cub Cadet 2000 Series works hard for those who demand more out of their equipment. You get more power from
the professional grade Kohler Command engine. More control and comfort available from electric power steering, an
adjustable steering wheel and a great seat. You even get more life out of your tractor with a fully welded steel frame, castiron transmission, cast-iron front axle and the legendary Cub Cadet direct shaft drive.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
CUB CADET ADVANTAGE.
Power shaft
Direct shaft drive gives the 2000 Series garden tractor the most efficient power transfer with no belts to slip or break. The
dual pedal foot-controlled hydrostatic transmission and cast-iron transaxle gives you maximum power to handle attachments and is the ultimate in durability and performance
Electronic power steering (EPS)
With electronic power steering and a very tight turning radius of 38 cm only, you'll be rewarded with nearly effortless operation and smooth control. Ask your dealer for more details.
High back seat with armrests
With the pillowy driver´s seat with extra high back and armrests there´s no more back-aching garden work. On this seat
it´s fun to ride.
Electro-mechanical deck lift
Lift the heavy duty cutting deck with just a push on the button. The 6-step deck positioner reliably stops the down travel
of the deck at your preferred cutting height.
2000 SERIES
GARDEN TRACTOR
GTX 2100
GTX 2100
Opttional cutting deck
Mowing area in m²/h
> 5.000
Cutting width
3 sizes available: 122 cm; 127 cm; 137 cm
Cutting height
38 - 116 mm
Number of blades
3
Deck engagement
Electro-magnetic
Deck height positions
2 wheels and front roller
Wash nozzle
Standard
Side discharge
Standard
Mulching plug
Accessory: 122 cm (19A70016100) / 127 cm
(OEM-190-193) / 137 cm (590-507-100)
Engine
Drive
Dual pedal forward/reverse control
Cylinders
122 CM, 127 CM AND
137 CM CUTTING DECKS
AVAILABLE AS
ACCESSORY
V-Twin horizontal shaft
Engine size
674 cm²
Rated power (kW / min )
.................................
15,9 / 3.000 (without cutting deck)
-1
Tank volume
17 l
Transmission
Hydrostatic, heavy-duty cast-iron
FEATURES
.................................
Kohler Command
DIRECT SHAFT DRIVE
.................................
Heavy-duty cast-iron transaxle
ELECTRIC POWER
STEERING
Speed
Infinitely variable
Control
Dual foot-pedal control
.................................
Standard
.................................
Cruise control
Front axle
Frame
Bright front lights
6 positions, electric lift
Deck wheels
Engine type
ELECTRIC DECK LIFT
Heavy-duty cast-iron with dual grease fittings
Front bumper
Heavy-duty steel
Turning radius
38 cm, tightest turn in its class
Wheel size (front/rear)
16" x 6,5"-8" / 23" x 10,5"-12"
Wheel bearings
Ball bearings
Easy entry frame
Standard
Seat type
DUAL PEDAL
FOOT-CONTROLLED
HYDROSTATIC
TRANSMISSION
.................................
Powerful KOHLER Command engine
SUSPENDED SEAT
Lever
Steering wheel / System
.................................
Comfort / Electric power steering
Tool box
Standard
Mow in Reverse (RevTEK)
Standard
Battery charger
Accessory (196-967-678)
Hour meter & service minder
Heavy duty front bumper
POWERED BY
THE LEGENDARY
KOHLER COMMAND
PROFESSIONAL GRADE
OHV V-TWIN ENGINE
.................................
Standard
L x W x H (approx.)
SERVICEABLE HEAVY
DUTY CAST-IRON
TRANSAXLE
.................................
High back with armrests
Seat adjustment
Comfort
or
2"
COMFORT
191 cm x 103 cm x 120 cm
Weight (approx.)
320 kg
Model number
14A-3GE-603
EAN
Price*
*Recommended retail price of the manufacturer
Anti-scalping deck wheels
Optional Cutting deck
You have the choice of 3 different side discharge cutting deck sizes, 122 cm, 127 cm or 137 cm.
The 122 cm deck is made of 2.8 mm thick fabricated steel and thus made for tougher jobs.
• 19A40015603
• 19A40013603
• 19A40014603
122 cm fabricated deck for model GTX 2100
127 cm stamped deck for model GTX 2100
137 cm stamped deck for model GTX 2100
cubcadet.eu
45
ACCESSORIES
..............................................................................................................................................................................................
FOR ALL CUB CADET RIDERS AND LAWN TRACTORS
Lawn tractor cover L / XL
• Size L: for small and medium sized lawn tractors
Mod. no.: 2024-U1-0003
Price:
*
• Size XL: for large sized and rear discharge lawn tractors
Mod. no.: 2024-U1-0004
Price:
*
Cub Cadet Tow behind sweeper
• Working width: 112 cm
Catcher capacity: 736 liter
Mod. no.: 196-543-000
Price:
*
Cub Cadet Tow behind broadcast spreader
• Spreading width: 370 cm
Container capacity: 87 kg
Mod. no.: 196-542-000
Price:
*
Cub Cadet Trailer
• Capacity: 544 kg
Volume: 425 liter
Mod. no.: 196-541-000
Price:
*
Spreader
• Tow broadcast spreader, volume 80 kg, poly
(measurements: approx. L 109,2 / W 96,52 / H 104,1 cm, weight: 26 kg)
Mod. no.: 196-036-000
Price:
*
• Tow broadcast spreader, volume 39 kg, poly
(measurements: approx. L 88,9 / W 55,9 / H 60,9 cm, weight: approx. 8 kg)
Mod. no.: 196-031-000
Price:
*
• Tow broadcast spreader, volume 45 kg, poly
(measurements: approx. L 67,3 / W 67,3 / H 36,8 cm, weight: approx. 15 kg)
Mod. no.: 190-525-000
Price:
*
Utility cart with poly bed
• Poly convertible push/tow cart , capacity max. 159 kg
(measurements: approx. L 142,2 / W 83,8 / H 76,2 cm)
Mod. no.: 190-236A000
Price:
*
Utility carts with steel bed
• Tow steel dump cart, capacity max. 227 kg
(measurements: approx. L 152,4 / W 83,8 / H 72 cm, weight: approx. 27 kg)
Mod. no.: 190-223B000
Price:
*
• Tow steel dump cart, capacity max. 340 kg, steel
(measurements: approx. L 177,8 / W 83,8 / H 73,7 cm, weight: approx. 70 kg)
Mod. no.: 196-507-000
Price:
*
Lawn sweeper
• Tow lawn sweeper, width 96 cm, 340 l, steel
(measurements: approx. L 182,9 / W 114,3 / H 58,4 cm, weight: approx. 30 kg)
Mod. no.: 190-145A000
Price:
*
cubcadet.eu
Lawn rollers
• Push / tow poly lawn roller, max. weight 114 kg when filled with water, 61 cm
(measurements: approx. L 127 / W 76,2 / H 45,6 cm)
Mod. no.: 190-228-000
Price:
*
• Tow poly lawn roller, max. weight 182 kg when filled with water, 91 cm
(measurements: approx. L 127 / W 106,7 / H 45,7 cm, weight 18 kg)
Mod. no.: 190-229-000
Price:
*
Sprayers
• Tow sprayer, 5,3 l/min, capacity 57 l, poly
(measurement: L 139,7 / W 61 / H 45,7 cm)
Mod. no.: 190-155-000
Price:
*
• Tow sprayer, large, 6,8 l/min, capacity 95 l, poly
(measurements: approx. L 139,7 / W 66 cm / H 50,8 cm)
Mod. no.: 190-537-000
Price:
*
Aerators / De-thatcher
• Tow tine de-thatcher 101,6 cm, 20 teeth (heat treated tines), steel
(measurements: approx. L 104 / W 101,6 / H 104 cm)
Mod. no.: 190-526-000
Price:
*
• Tow lawn aerator (spiker type) 101,6 cm, 12 spike wheels (spiker), steel
(measurem.: approx. L 104 / W 101,6 / H 104 cm, weight: approx. 14 kg)
Mod. no.: 190-224A000
Price:
*
Grass bags
• Twin bagger without blades, 200 litres, for 107 cm side discharge models
Mod. no.: OEM-190-180A
Price:
*
• Tripple bagger, 300 litres, with blades, for model CC 1224 KHP
Mod. no.: 19A40002OEM
Price:
*
• Twin bagger, 200 litres, without blades, for model CC 1022 KHT
Mod. no.: 19A30003OEM
Price:
*
• Twin bagger, 200 litres, for 96 cm side discharge models
Mod. no.: 196-180A699
Price:
*
• Twin bagger, 115 litres, without blades, for MINI-RIDER CC 114 TD
Mod. no.: 19A30014OEM
Price:
*
• Twin bagger, 200 litres, without blades, for Z-Force SZ-48
Mod. no.: 19A70040100
Price:
*
• Twin bagger, 200 litres, with blades, for RZT 50
Mod. no.: 19B70004100
Price:
*
• Tripple bagger, 300 litres,without blades, for RZT 54
Mod. no.: 19A70034100
Price:
*
Hitch
• Hitch for all RZT models
Mod. no.: 19A70025100
Price:
*
Cutting decks
• 122 cm fabricated deck for model GTX 2100
Mod. no.: 19A40015603
Price:
*
• 127 cm stamped deck for model GTX 2100
Mod. no.: 19A40013603
Price:
*
• 137 cm stamped deck for model GTX 2100
Mod. no.: 19A40014603
Price:
*
High grass cutting deck
• 92 cm fabricated high grass cutting deck. Fits all 1000 series
rear discharge models. No collecting possible.
*Recommended retail price of the manufacturer
Mod. no.: 196-806A678
Price:
*
47
ACCESSORIES
Deflectors
• Rear deflector for models CC 1016 AE, CC 1018 HE, CC 1018 BHE,
CC 1018 AN, CC 1019 HN, CC 1020 BHN and CC 1024 KHN
• Rear deflector for models CC 714 TE and CC 714 HE
Mod. no.: 196-972A678
Price:
*
Mod. no.: 196-750A678
Price:
*
Mulch kits
• Mulch kit (without blades) for models CC 1016 AE, CC 1018 HE, CC 1018 BHE,
CC 1018 AN, CC 1019 HN, CC 1020 BHN and CC 1024 KHN
Mod. no.: 196-751A678
Price:
*
• Mulch kit (without blades) for model CC 714 TF
Mod. no.: OEM-190A116
Price:
*
• Mulch kit (without blades) for models CC 714 TE and CC 714 HE
Mod. no.: 196-749A678
Price:
*
• Mulch kit for 122 cm fabricated deck for model GTX 2100 and for Z-Force SZ-48
Mod. no.: 19A70016100
Price:
*
• Mulch kit for 127 cm and 137 cm stamped deck for model GTX 2100
Mod. no.: OEM-190-193
Price:
*
Front bumper
• Front bumper kit - FastAttach™ fits all 700 & 1000 series lawn tractors
Mod. no.: OEM-196B603
Price:
*
Agricultural tires
• Chevron style rear wheels 18"x9,5". Set exists of 2 cpl. wheels.
Fits all tractors with either 18" or 20" rear wheels.
Mod. no.: 196-721-678
Price:
*
Front sweeper and collector
• Front sweeper - FastAttach™ for models CC 1016 AE, CC 1018 HE,
CC 1018 BHE, CC 1018 AN, CC 1019 HN 1020 BHN und CC 1024 KHN
Mod. no.: 196-226C678
Price:
*
• Front collector for front sweeper model 196-226C678
Mod. no.: 196-227A678
Price:
*
cubcadet.eu
Tractor shown with dozer blade, spreader & snow chains
Tire chains
• Tire chains 18" x 9,5" with adapter for models CC 714 TE and CC 714 HE
Mod. no.: 196-898-699
Price:
*
• Tire chains 20" x 8,0" with spacers for models CC 714 TF, CC 714 HF,
CC 717 HG, CC 1016 AF, CC 1019 HG, CC 1018 BHG, CC 1022 KHT,
CC 1016 AE, CC 1018 HE, CC 1018 BHE, CC 1018 AN, CC 1019 HN,
CC 1020 BHN and CC 1024 KHN
• Tire chains 23" x 9,5" for model GTX 2100 and CC 1224 KHP
Mod. no.: 196-658-699
Price:
*
Mod. no.: 196-964-678
Price:
*
Dozer blade & rubber lip
• 117 cm dozer blade for all models, except model GTX 2100
Mod. no.: OEM-190-833
Price:
*
• 117 cm dozer blade with remote control lever for model GTX 2100
Mod. no.: 19B40022100
Price:
*
• Rubber lip - universal - for all dozer blades
Mod. no.: 196-718-678
Price:
*
Snow thrower accessory
• 107 cm 2-stage snow thrower, front attachment for models CC 1016 AF,
CC 1019 HG, CC 1018 BHG, CC 1022 KHT, CC 1224 KHP, CC 1016 AE,
CC 1018 HE, CC 1018 BHE, CC 1018 AN, CC 1019 HN, CC 1020 BHN
and CC 1024 KHN
Mod. no.: OEM-190-032
Price:
*
Miscellaneous
• Electric battery charger with 12 V plug, 1000 mA for all tractor models,
with trigger charge function (for battery Winter maintenance)
Mod. no.: 196-967-678
Price:
*
Push spreaders
• Smart spreader, push, 59 kg tray capacity, solid pro construction
Mod. no.: 190-454A000
Price:
*
• Push spreader, 23 kg tray capacity, weight approx. 4 kg
Mod. no.: 190-701-000
Price:
*
*Recommended retail price of the manufacturer
49
TIME
EFFICIENT
cubcadet.eu
CUT DOWN YOUR MOWING TIME UP TO 50 %
FOUR DIFFERENT SERIES AT YOUR CHOICE
..............................................................................................................................................................................................
RZT-S
Residential Zero-Turn with steering wheel
O
Z
ER
TANK SZ
Commercial grade Zero-Turn with steering wheel
O - T U RN
Z-FORCE
Heavy duty Zero-Turn with steering wheel
RZT
Residential Zero-Turn with lap bars
SYNCRO-STEER TECHNOLOGY® - UNBEATABLE MANOEUVRABILITY AND UNMATCHED
CLIMBING ABILITY
The Cub Cadet Syncro-Steer® Technology is the next evolution of Zero-Turn technique. Our unique Zero-Turn riders with
a traditional steering wheel provide you with the amazing manoeuvrability of a conventional Zero-Turn but with full control
of the front wheels. Steering and drive are perfectly syncronized to ensure the exact speed and rotating direction of each
rear wheel at every position of the front wheels. This revolutionary technology is available on RZT-S, Z-FORCE and TANK
series.
51
RZT-S
O
Z
ER
O - T U RN
A QUANTUM LEAP
Generic model
IN ZERO-TURNS.
The RZT-S has a steering wheel so it’s easier to operate and control. They give you true Zero-Turn manoeuvrability with
steering wheel and four wheel control for remarkable stability even on hills. So your lawn can get that well groomed cut –
with half of the working time. Now that’s smart.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
SYNCHRO STEER® TECHNOLOGY
CUB CADET ADVANTAGE.
Innovative Synchro Steer® Technology, the steering wheel controls both the front wheels and
the independently controlled rear wheels for better control, better stability, better results. You’ll
be able to tackle tough terrain and steep hills quickly and easily with added traction and control
– without damaging your yard.
TIME
EFFICIENT
NEW
RZT-S SERIES
ZERO-TURN RIDERS
WITH STEERING WHEEL
RZT-S 42
Generic model
RZT-S 42
RZT-S 46
Mowing area in m²/h
> 2.000
> 3.000
Cutting width
107 cm
Cutting deck
38 - 100 mm
Number of blades
2
Deck engagement
Electro-magnetic
Deck height positions
2 wheels
4 wheels
Wash nozzle
Standard
Mulching plug
Standard
Drive
Engine
Engine type
Cylinders
.................................
603 cm³
Rated power (kW / min )
726 cm³
10,0 / 2.400
-1
12,0 / 2.400
Tank volume
10,5 l
Transmission
Dual Hydrostatic
Speeds
Infinitely variable
Control
Dual foot pedal control
DECK WASH SYSTEM
.................................
OPTIONAL ACCESSORIES
AVAILABLE
.................................
UNMATCHED CLIMBING
ABILITY
Standard
Front axle
.................................
Steel
CONVENIENT E-PTO
DECK ENGAGEMENT
Zero / Synchro Steer Technology
Turning radius/Steering system
®
Wheel size (front/rear)
.................................
13" x 5" / 18" x 8,5"
Wheel bearings
Sleeve bearings
Easy entry frame
Standard
Seat type
High back
Seat adjustment
..................................
.................................
Accessory (19B70020OEM)
Grass deflector
HIGH-BACK, SUSPENDED
ADJUSTABLE SEAT
DUAL HYDROSTATIC
TRANSMISSION
Standard
Bag
ZERO-TURN
MANOEUVRABILITY
STEERING WHEEL
CONTROL
V-Twin
Engine size
.................................
.................................
Kawasaki OHV
Cruise control
Discharge
system
FEATURES
8
Deck wheels
Frame
RZT-S 46
117 cm
Cutting height
Comfort
Generic model
SUPERIOR MULCHING
ABILITY
.................................
EASY ENTRY FRAME
.................................
Quick adjuster lever
LARGE PNEUMATIC
FRONT WHEELS
Steering wheel
Comfort
Tool box
Standard
.................................
Mow in Reverse (RevTEK)
Standard
MULCHING PLUG
INCLUDED
Battery charger
Accessory (196-967-678)
Hour meter & service minder
L x W x H (approx.)
203 cm x 116 cm x 118 cm,
width with deflector: 127 cm
203 cm x 126 cm x 118 cm,
width with deflector: 137 cm
234 kg
256 kg
17BICBDS603
17BICBDT603
Weight (approx.)
Model number
.................................
Standard
EAN
Price*
Dual hydrostatic
transmission
The dual hydrostatic transmission provides you with the highest manoeuvrability.
Comfortable E-PTO
deck engagement
The electro-magnetic fingertip deck engagement provides highest user comfort.
cubcadet.eu
*Recommended retail price of the manufacturer
53
Z-FORCE SZ
O
Z
ER
O - T U RN
A NEW LEVEL
Generic model
OF VERSATILITY.
The Z-Force SZ features a steering wheel instead of lap bars, so it’s easier to learn and use. And with SynchroSteer
technology, you get true zero-turn manoeuvrability and steering wheel control for greater stability on hills. All so you’ll
experience superior performance that makes your workday easier and your home more beautiful.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
Fabricated cutting deck
Every centimeter of the Z Force SZ’s
heavy-gauge, welded steel cutting deck
has been engineered to make sure you
get unsurpassed airflow, blade overlap,
and quality of cut. Every time.
CUB CADET ADVANTAGE.
Dual hydrostatic
transmission
The dual hydrostatic transmission provides you with the highest manoeuvrability.
Synchro Steer® Technology
Innovative Synchro Steer® technology, the steering wheel controls both the front wheels and the independently controlled
rear wheels for better control, better stability, better results. You’ll be able to tackle tough terrain and steep hills quickly and
easily with added traction and control – without damaging your turf.
TIME
EFFICIENT
Z-FORCE SERIES
ZERO-TURN RIDERS
WITH STEERING WHEEL
Z-FORCE SZ-48
"Ride-on mower
of the year 2012"
FEATURES
.................................
HEAVY-DUTY
PROFESSIONAL-GRADE
122 CM FABRICATED
CUTTING DECK
Cutting deck
Z-FORCE SZ-48
Mowing area in m²/h
> 4.000
Cutting width
122 cm
Cutting height
25 - 102 mm
Number of blades
3
Deck engagement
Electro-magnetic
Deck height positions
Deck wheels
2
Wash nozzle
Standard
Engine
Drive
Discharge
system
V-Twin
Engine size
726 cm³
Rated power (kW / min )
DECK WASH SYSTEM
.................................
STRONG 22 HP KAWASAKI
V-TWIN OHV ENGINE
.................................
Soft grip steering wheel
Tank volume
17 l
Transmission
Dual Hydrostatic
Speeds
Infinitely variable
Control
Dual foot pedal control
Bag
Accessory (19A70011100)
Grass deflector
Standard
Front axle
Cast-iron
Bumper
SUPERIOR MULCHING
ABILITY
.................................
12,3 / 2.750
-1
.................................
.................................
Kawasaki OHV
Cylinders
ADJUSTABLE STEERING
COLUMN
DUAL HYDROSTATIC
TRANSMISSION
Accessory (19A70016100)
Engine type
Frame
Adjustable steering column
15
Mulching plug
EASY ENTRY FRAME
.................................
LARGE PNEUMATIC
FRONT WHEELS
.................................
High back seat with armrests
SUSPENDED SEAT
.................................
Rear
Zero / Synchro Steer® Technology
Turning radius/Steering system
Wheel size (front/rear)
13" x 5" / 20" x 10"
Wheel bearings
Ball bearings
Easy entry frame
Standard
Seat type
Side deflector for wide distribution
High back with armrests and gel suspension
Seat adjustment
Comfort
.................................
Steering wheel/Steering column
Tool box
Lever
Comfort / tiltable column
Standard
Battery charger
Hour meter & service minder
L x W x H (approx.)
Weight (approx.)
Model number
Accessory (196-967-678)
Standard
Pneumatic front caster wheels
194 cm x 124 cm x 118 cm,
width with deflector: 134 cm
312 kg
17AIDGHB603
EAN
Price*
*Recommended retail price of the manufacturer
cubcadet.eu
Anti-scalping deck wheels
55
TANK SZ
NEW
O
Z
ER
O - T U RN
Generic model
IT'S NOT JUST A TOUGH COMMERCIAL ZERO-TURN.
IT'S THE SMARTEST.
Hills once considered impossible to mow on a zero-turn rider are no match for this commercial zero-turn. With steering
wheel control and four-wheel steering, the Cub Cadet TANK SZ offers truly unmatched stability on all types of terrain.
Whether you’re facing two acres or twenty, it easily delivers a professional-grade cut like never before. There’s truly
nothing else on earth like the TANK SZ.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
CUB CADET ADVANTAGE.
Incredible maneuverability and confidence
With unrivaled stability and precision control, there's no terrain the TANK SZ can't handle. Four-wheel steering gives more
control and confidence on hills than ever before. By delivering a quality cut at angles other riders can't handle, it's easy to
see what makes the TANK SZ the smartest choice in commercial zero-turns.
Unbeatable Corrosion Protection and Durability
Provides twice the protection against unforgiving environmental conditions while ensuring even the most complex parts
are thoroughly and evenly coated inside and out with an electronically-applied dual layer of eCoat and powder. Now that's
a smart investment.
More Power for Unmatched Results
Kawasaki® FX Series commercial-grade engines deliver higher horsepower and maximum torque for enhanced performance. Heavy-duty, remote canister air filtration system and premium cooling system provide a durable, long-life design.
Professional-Grade Comfort
A high-back elasticity vibration control (EVC) comfort seat with arm rests is the perfect place to spend hours of productive
mowing. With the quick adjustable steering column the soft grip steering wheel can be perfectly adjusted to your preferred
position and with the power steering it's a breeze to maneouver the TANK SZ even through the sharpest corners.
TIME
EFFICIENT
TANK SZ SERIES
ZERO-TURN RIDERS
WITH STEERING WHEEL
TANK SZ-60
DESIGNED FOR
PROFESSIONAL DAILY
USE ON CHALLENGING
TERRAIN.
FEATURES
.................................
ZERO-TURN WITH
STEERING WHEEL
CONTROL AND FOUR
WHEEL STEERING
.................................
POWER STEERING
Cutting deck
TANK SZ-60
Mowing area in m²/h
> 6000
Cutting width
152 cm
Cutting height
26 - 127 mm
Number of blades
3
Deck engagement
Electro-magnetic
Deck height positions
2 + roller
Mulching kit / Grass deflector
Drive
Engine
Engine type
COMMERCIAL GRADE
KAWASAKI FX-SERIES
ENGINE
.................................
Approved foldable ROPS bar
QUICK-ADJUST
STEERING COLUMN
.................................
OHV V-Twin
Engine size
PIVOTING FRONT AXLE
852 cm³
Rated power (kW / min )
Tank volume
68,0 l
Transmission
Dual Hydrostatic
Speeds
Infinitely variable
Control
Dual foot-pedal control
High back seat with armrests
NEEDLE BEARINGS ON
FRONT WHEELS
Zero / Synchro Steer Technology
.................................
16" x 6,5" / 24" x 12"
Wheel bearings
HD needle bearings
Easy entry frame
Standard
.................................
.................................
®
Wheel size (front/rear)
GREASABLE DECK
SPINDLES
GREASABLE NEEDLE
BEARINGS ON FRONT
CASTER SYSTEM
Heavy-duty rear bumper with hitch standard
Turning radius/Steering system
Seat type
.................................
16,7 / 2.600
-1
STRONG HEAVY DUTY
RAIL FRAME
.................................
Standard / Standard
Cylinders
60"/152 CM FABRICATED
COMMERCIAL GRADE
SLOPED NOSE DECK
.................................
Commerical grade Kawasaki FX Series
Rear bumper & hitch
Frame
Adjustable steering column
17
Deck wheels
Scratch pad for side protection
High back with armrests and gel suspension
Seat adjustment
Comfort
.................................
Steering wheel/Steering column
Tool box
Quick adjuster lever
Comfort / Adjustable steering column
Standard
Battery charger
Hour meter & service minder
L x W x H (approx.)
Weight (approx.)
Model number
Accessory (196-967-678)
Standard
Large pneumatic front wheels
220 cm x 170 cm x 188 cm,
width with deflector: 190 cm
590 kg
53AI2PUD603
EAN
Price*
*Recommended retail price of the manufacturer
cubcadet.eu
Anti-scalping deck wheels
57
RZT
O
Z
ER
O - T U RN
Generic model
THE INNOVATION YOU NEED
TO MAKE THE JOB EASIER.
If you want to save time, it’s time to get a RZT Zero-Turn Rider. Choose from three models that let you mow faster on
complex landscapes. For maximum power, check out the RZT 54 which features a powerful Kawasaki OHV twin engine
and 137 cm cutting deck. Its wider cutting width and triple blades help you cut grass faster, giving you more time to relax
and enjoy your lawn.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
CUB CADET ADVANTAGE.
Driving forward:
Slowly and evenly move both drive control levers forward. The mower will start to
move forward. As the control levers are pushed further forward, the speed of the mower will increase. To slow down the tractor
move the control levers rearward to attain
the desired speed or move the levers to the
neutral position to stop the mower.
Turning to the left:
Turning to the right:
To turn to the left, move the left drive
control lever rearward of the right
lever.
To turn to the right, move the right
drive control lever rearward of the left
lever. The greater the distance between the two levers, the sharper the
mower will turn.
Driving reverse:
Executing a zero-turn:
To drive the mower in reverse, slowly
and evenly move both drive control
levers rearwards.
To execute a zero-turn, move one
control lever forward while simultaneously moving the other control
lever rearward.
TIME
EFFICIENT
RZT SERIES
NEW
ZERO-TURN RIDERS
WITH LAP BARS
RZT 42
RZT 50
RZT 54
Generic model
Generic model
RZT 42
RZT 50
RZT 54
Mowing area in m²/h
> 2.000
> 3.500
> 5.000
Cutting width
107 cm
127 cm
137 cm
Cutting deck
Cutting height
38 - 100 mm
Number of blades
2
3
Deck engagement
8
Deck wheels
2
Engine
Drive
Discharge
system
8
8
2
4
Wash nozzle
Standard
Mulching plug
Standard
Cylinders
Rated power (kW / min-1)
726 cm³
10,0 / 2.400
12,0 / 2.400
12,5 / 3.100
Transmission
Dual Hydrostatic
Speeds
Infinitely variable
Control
Lap bars
Bag
.................................
726 cm³
11,4 l
Accessory(19C70020OEM))
Grass deflector
Accessory (19B70004100)
HYDROSTATIC DRIVE
Accessory (19A70008100)
EASY ENTRY FRAME
LARGE PNEUMATIC
FRONT CASTER WHEELS
13" x 5" / 18" x 9,5"
Wheel bearings
Ball bearings
Easy entry frame
Standard
Seat type
High back
High back with armrests
Seat adjustment
13" x 5" / 18" x 9,5"
.................................
High back with armrests
SUSPENDED SEAT
.................................
Standard
Battery charger
Accessory (196-967-678)
Hour meter & service minder
L x W x H (approx.)
SUPERIOR MULCHING
ABILITY
.................................
2-way adjustable lap bars with comfort grips
Tool box
.................................
MULCHING PLUG
INCLUDED
Quick adjuster lever
Steering wheel
ZERO-TURN ABILITY
.................................
.................................
Zero
11" x 4" / 18" x 8,5"
ELECTRIC PTO FOR
CONVENIENT DECK
ENGAGEMENT
.................................
Greasable, steel
Wheel size (front/rear)
DECK WASH SYSTEM
.................................
.................................
Standard
Turning radius
.................................
LAP BARS FEATURING
SUPER-SOFT GRIPS
603 cm³
Tank volume
107 CM TWIN-BLADE
DECK, 127 AND 137 CM
TRIPLE-BLADE DECKS
ANTI-SCALPING WHEELS
V-Twin
Engine size
FEATURES
.................................
.................................
Kawasaki OHV
Front axle
Frame
3
Electro-magnetic
Deck height positions
Engine type
Comfort
Generic model
Standard
203 cm x 116 cm x 92 cm,
width with deflector: 127 cm
Weight (approx.)
Model number
203 cm x 150 cm x 92 cm,
width with deflector: 154 cm
203 cm x 145 cm x 92 cm,
width with deflector: 162 cm
228 kg
253 kg
265 kg
17BICACS603
17BICACP603
17BICACK603
EAN
Price*
Floating cutting deck
The floating deck follows the
contours of the ground for
superior cutting, providing a
smoother and more uniform
look.
*Recommended retail price of the manufacturer
Dual hydrostatic
transmission
The dual hydrostatic transmission provides you with
the highest manoeuvrability.
cubcadet.eu
59
UTV
"Utility vehicle
of the year 2012"
BIGGER. STRONGER. TOUGHER.
POWERFUL UTILITY.
EXTREME VERSATILITY.
The Cub Cadet 4 x 4 utility vehicle will fit your needs, be it a campus, institutional grounds, or large property. It was built
tough to traverse rough terrain, haul heavy loads and always be ready for whatever you’re up to.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
Strong diesel engine
Powered by a Yanmar Diesel engine, the
Cub Cadet 4 x 4 runs cleanly, quietly and
efficiently. The direct-injection engine
produces steady and constant horsepower no matter what the job. It has higher
torque reserve giving the operator more
power so that they can get more done.
Smoother ride
Independent dual A-arm suspension
with coil-over shocks provides 20 cm of
wheel travel for an unbelievably smooth
ride. You’ll cruise over the most challenging terrain for a remarkably comfortable
experience that you only get from the
best utility vehicles.
Higher capacity
Large tiltable bed with optional electric
cylinder. It fits a Euro palet and is suitable
for tough jobs.
CUB CADET ADVANTAGE.
Professional grade
driver´s seat
A professional grade fully suspended
driver´s seat provides you with highest
comfort.
HURST shifter
With the Hurst shifter you have the
choice of forward/neutral/reverse and
low speed forward gears.
Ergonomic dash board
The ergonomic dash board is free from
knick-knack and includes a tray for your
belongings.
cubcadet.eu
FEATURES OF THE UTILITY VEHICLE
Welded steel frame
with box frame construction provides
increased stiffness for stronger towing
capability and industry-leading payload
capacity.
Heavy-duty locking
rear differential
drives torque equally to both rear wheels,
supplying extra power, traction and
control in severe conditions.
"
CVT Transmission
4-wheel drive: Once you switched to
4 x 4, the UTV automatically turns into
4-wheel drive if more traction is needed –
you do not have to press a button or
operate a lever and can keep the 4 x 4
locked all time.
4-wheel hydraulic
20 cm disc brakes
with dual circuit master cylinder and
stainless steel brake lines both offer
exceptional control and stopping power.
Easy switch
to 4 x 4
With a rocker switch in the dash, you can
switch from 4 x 2 to 4 x 4 if required.
23 cm of
ground clearance
plus extra-wide wheel base and low
center of gravity ensure stability under
extreme conditions.
61
ACCESSORIES
Head rest
Electrical accessory harness
Soft cabin
Floor mat
Solid cabin with windshield and wiper.
Optional heating system and doors available.
Full size UV cover
Plastic bed liner, fits a full CE pallet
Rockinger hitch
183 cm wide dozer blade with electric lift kit
Electric winch with remote control
ACCESSORIES
ARTICLE NO.
Cabin for 4 x 4, roof, wiper and windshield
196-206-603
Cabin heating system (on dash assembly) connected to the engine cooling system
196-304-600
Doors incl. rear window made of safety glass for cabin
196-303-600
Beacon light for cabin
196-305-600
2 Working lights H3 front for cabin
196-306-600
1 Working light H3 rear for cabin
196-307-600
Windscreen wash system for cabin
196-308-600
Turf saving tires incl. rims, black (no road approval)
196-309-600
Tire chains front wheels
196-893-678
Tire chains rear wheels
196-966-678
Soft cabin (no road approval)
39B-201-100
Winch
39A70015100
Head rest kit (not with hard cabin) (no road approval)
39A-207-100
UV cover for 4 x 4
39A-211-100
Electric bed lift (requires accessory harness 39A-209-100)
39A-212-100
Floor mats for 4 x 4, rubber
39A-213-100
Snow blade 183 cm with electric lift and bracket (requires accessory harness 39A-209-100)
39A-229-100
Rockinger hitch
39A-242-600
Plastic bed liner
39A70001100
Electrical accessory harness. Installed when electrical accessories are used (e.g. electric bed lift, light bar,
working lights (front and rear)
39B-209-100
PRICES*
UTV
UTILITY VEHICLE
4 x 4 DIESEL
4 x 4 DIESEL
Engine
Yanmar Diesel, model 3TNV70
Engine
Cylinders
3 in line, mid mounted
Engine size
854 cm³
Rated power (kW / min )
16,3 / 3.600
Tank volume
21,5 l Diesel
-1
Engine cooling
Water cooled with large radiator out front
Max. engine torque
Drive
Electrical
system
.................................
TOP SPEED OF UP TO
40 KM/H
Differential lock
Manual lever
Speed (approx.)
0 - 40 km/h max.
.................................
Gear Box
Fully enclosed, oil bath
.................................
Selector
Hurst shifter (H-L-N-R)
Tires
All-terrain
Wheel size (F/R)
25" x 10" - 12" / 25" x 11" - 12", 4 PR
Electrical system
12 V, negative earth
Alternator rated power
12 V power outlet
Max. vertical load on
coupling point
HIGH BED CAPACITY
.................................
ADJUSTABLE COIL-OVER
SHOCKS
.................................
DUAL A-ARM, FULLY
INDEPENDENT 4-WHEEL
SUSPENSION
28°
.................................
1.269 / 1.358 mm
HYDRAULIC DISC BRAKES
WITH FLEX STEEL LINES
ON ALL 4 WHEELS
100 kg
Solid ROPS
Adjustable coil over shock on all 4-wheels
Spring travel
Brakes
Road approval kit included
In-dash
Track width min./max.
Wheel suspension
STEEL BOX FRAME
12 V - 65 A
Ramp angle
.................................
20 cm
20 cm diameter hydraulic disc on all 4-wheels
Brake lines
Stainless steel braided
Steering
Frame
FEATURES
.................................
3-CYLINDER YANMAR
DIESEL ENGINE
52 Nm / 2.600 min-1
4WD / CVT (Continuous Variable Transmission)
with on dash switch from 2 WD to 4 WD
Drive
Rack and pinion on front wheels
Towing capacity (max.)
Load platform
Payload capacity (max.)
Unbraked: 750 kg, braked: 1100 kg
Steel, L = 110 cm, W = 131 cm, H = 29 cm
Without cabin: 420 kg, with cabin: 297 kg
Wheelbase
198 cm
Ground clearance
(foot platform) (approx.)
23 cm
Ground clearance (bed)
(approx.)
27 cm
Max. turning angle of the
wheels
37° to the right & left
Min. turning radius
Comfort
4 wheel independent double
A-arm wheel suspension
Storage
4,05 m
Glove box
Road approval
L x W x H (approx.)
Weight (approx.) without
accessories
Model number
Front hitch with bolt
Large radiator
All components already installed for
homologation in EU countries
317 cm x 165 cm x 185 cm
727 kg
37AK466D603
EAN
Price*
*Recommended retail price of the manufacturer
Halogen headlights
cubcadet.eu
63
TILLER
UTV
SAVES TIME AND
IS EASY ON YOUR BACK.
Thanks to the Cub Cadet garden tiller RT 65, the strenuous and time-consuming work of digging and loosening the soil
by spade is a thing of the past.
Powerful and reliable, the tiller tackles any job – it breaks up even hard soil and facilitates seed preparation. It is ideal for
areas of up to 1000 m². Four self-sharpening, heat-treated, high-quality tine sets made of spring steel ensure excellent
work results at a tilling width of 46 cm. The adjustable depth bar gives the machine better stability and allows the working
speed and tilling depth to be controlled. The tiller has a forward and a reverse gear and is easy to maneuver. Acceleration,
transmission and working direction can be controlled from the operator's position. The handle which is freely adjustable
makes using the machine safe, comfortable and easy on your back.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
CUB CADET ADVANTAGE.
Dual tine direction – superior ground breaking
With 33 cm dual direction, self-sharpening tines, the Cub Cadet tiller provides fine cultivating and seedbed preparation in
any soil.
46
Covers more ground
Extra-wide 46 cm tilling width gives you more tilling area with each pass – so you can cover more ground at a time.
CM
Easy to use
Single-hand operation lets you stand to the side and steer the tiller with one hand.
TILLER
DUAL TINE DIRECTION
REAR TILLER
RT 65
RT 65
Handle
Drive
Engine
Tilling system
Tilling width
46 cm
4 (2 x 2) heat-treated, self-sharpening tines,
33 cm diameter
Tines
Tine direction
forward / reverse
Side shields
Standard
Rear shield
With rake
Counter balance weight at front
Standard
Engine type / Engine size
Cub Cadet OHV 65 H / 208 cm³
Rated power (kW / min-1)
3,9 / 3.600
Comfortable full bail handle with
soft grips
FEATURES
.................................
STRONG CUB CADET
OHV 65 H ENGINE
Start
Pull
.................................
Fuel tank capacity
2,2 l
1 FORWARD AND
1 REVERSE GEAR
Wheeldrive system with forward and
reverse gear
Transmission
Wheels
355 mm, pneumatic, agricultural
Handle
Continously height adjustable for ergonomical
and safe working
Clutch control
Full bail lever for lateral control. No side-to-side
adjustment of the handle neccessary!
Soft grip on the handle
Weight (approx.)
Model number
.................................
Fully covered tine set with 46 cm
working width
.................................
ADJUSTABLE DEPTH BAR
.................................
COUNTERBALANCE
FRONT WEIGHT
Standard
104 kg
.................................
21AB45M8603
FORWARD & REVERSE
TINE ROTATION
.................................
EAN
Price*
*Recommended retail price of the manufacturer
355 MM PNEUMATIC
WHEELS WITH
AGRICULTURAL TREAD
Adjustable depth stake
REAR PROTECTION
SHIELD WITH RAKE
FUNCTION FOR A
PERFECT FINISH
.................................
cubcadet.eu
65
LEAF VACUUM
MR. CLEAN ON WHEELS.
THE SPECIALIST FOR AUTUMN TASKS.
The Cub Cadet Leaf Vacuum/Shredder model CSV 060 turns aking manual autumn leaf collection into fun. Your garden
will be clean in next to no time. Driven by a powerful Cub Cadet 4-cycle engine, the CSV 060 is vacuuming leafs and grass
clippings with ease. With a vacuum volume of 34 m³/min the 61cm wide vacuum nozzle provides the right performance
for the entire garden cleaning.
SMARTER FEATURES FOR A BETTER EXPERIENCE. THAT’S THE
CUB CADET ADVANTAGE.
Vacuum hose
Alternatively the included 2 m long vacuum hose with long grip and nozzle can be used to clean areas which are hard to
reach. Simply flip the switch on the vac front nozzle to change from nozzle to hose function to clean under bushes or along
a wall fast and effective.
Shredder blades
Internal shredder blades are reducing the volume of leafs and small twigs in a relation of up to 10:1. After vacuuming and
shredding the material is automatically transferred into the felt catcher.
Separate chipper chute
Twigs and branches up to a max. diameter of 38mm can get chipped by feeding them into the separate chipper chute. Two
rotating hardened steel blades convert branches to fine mulch.
LEAF
VACUUM
PETROL
CSV 060
CSV 060
Working system
Working width
61 cm
Vacuum volume
34 m³ / min.
Separate chipper chute
Standard
Max. branch diameter
up to 38 mm, depending on the material
Vac nozzle adjustment
Individual (16 - 104 mm)
Engin
Reduction ratio
Cub Cadet OHV 55 / 159 cm³
Rated power (kW / min-1)
2,7 / 3.600
Start
Pull
Fuel tank capacity
1,0 l
Bagging
Wheels
Choke for easy starting
Wheel size (front/rear)
Wheel bearings
Standard
200 mm / 230 mm
Ball bearings
Catcher bag
Felt, for dust reduction
Bag capacity
60 l
Vacuum hose
On board, 2 m long
Handle
Handle /
Comfort
up to 10:1
Engine type / Engine size
Individual
height adjustment
The vacuum nozzle distance to
ground can be adjusted in 5 different
heights from 16 to 104 mm with an
adjustment lever at the front wheels.
This enables you to adapt the vacuum to individual conditions. A higher
adjustment can be of advantage on
gravel walkways while a lower adjustment would be preferred on solid
grounds.
Safety switch
Safety glasses
Standard
Weight (approx.)
Model number
EAN
44 kg
24A-06MP603
VACUUM VOLUME OF
34 M³/MIN AIR
.................................
61 CM WIDE VACUUM
NOZZLE
.................................
2M LONG VACUUM HOSE
INCLUDED
.................................
SEPARATE BRANCH
CHIPPER CHUTE
.................................
Straight, foldable
Engine does not start without collector
bag mounted
FEATURES
.................................
Safety glasses
60 LITER
COLLECTING FELT BAG
.................................
Your eyes should always be protected against injury, even when vacuuming leaf. This is why we pack by
safety glasses to every Cub Cadet
CSV 060 Shredder/Vacuum.
Price*
*Recommended retail price of the manufacturer
cubcadet.eu
67
SCARIFIER
PETROL
SCARIFIER
CC V 40 B
BEAUTY TREATMENT
FOR YOUR LAWN.
FEATURES
.................................
CUB CADET OHV ENGINE
.................................
17 FLAIL DOUBLE BLADES
AND 16 DOUBLE SPRINGS
Scarifying is an important part of the perfect lawn care. It helps to fight against the notorious thatch
which is formed in every lawn and is blocking the supply of air, water and nutrients to the roots.
Correct scarifying will let the lawn breathe again. The Cub Cadet scarifier CC V 40 B will bring the
right power to remove this thatch so that sunlight, air and water can reach again the soil and roots.
Above that, the CC V 40 B disposes of blades and springs. This allows for two functions in one
machine: aerating and scarifying.
.................................
CC V 40 B
CATCHER BAG INCLUDED
Engine
DOUBLE BALL BEARINGS
ON ALL WHEELS
Rated power (kW / min-1)
2,3 / 3.600
Starting
Pull
Wheels
Push
Wheels (F/R)
200 mm / 200 mm
Double ball bearings
Chassis (material)
Standard
Steel body with plastic cover
Working method
Working width
40 cm
Tine re-adjustment
Infinite / central
Adjustment range
0 to -15 mm
Transport position
Standard
Collecting
Standard
Rear discharge without collector
Standard
Aerating
Standard
Blade drive
Blades
.................................
Cub Cadet 35 H OHV, 123 cm³
Drive
Blades and springs
The CC V 40 B has 17 flail double blades and 16
double springs. This combination allows for two
functions in one machine – for aerating and scarifying. If you would like to aerate the soil of your
garden, use the higher position with a gentle touch
of the blades and springs on the surface of the soil.
If there is the need to scarify, use a deeper position
of the blades and springs which allows having a
more aggressive action on the surface.
Belt
Verticutter blades
34 (17 double)
Diameter of blades
Aerating springs
Bagging
CENTRAL DEPTH
ADJUSTMENT
163 mm
32 (16 double)
Grass catcher type
Soft bag
Grass catcher (capacity)
Handle type shape
Comfort
.................................
Engine
.................................
60 l
The working depth of the Cub Cadet scarifyer
CC V 40 B can easily be changed centrally.
Ergonomic
Foldable handle
Standard
Handle grip at the front end
Standard
Cub Cadet double action system
scarifying & dethaching
Accessory included or optional
Grass catcher included
Weight (approx.)
Model number
Working depth adjustment
36 kg
16BH8AMQ603
EAN
Price*
Remote transport position
With the lever on the handle you can switch from
transport to working position conveniently from
behind the unit.
Important lawn care information:
After scarifying your lawn, please don´t forget to reseed blank spots and to feed it with fertilizer and water. Your local dealer will be
happy to provide you with further information.
*Recommended retail price of the manufacturer
cubcadet.eu
EMISSION OVERVIEW
Sound level
Vibrations
Sound pressure level
measured LpA (dB)
Sound power level
LwA (dB)
Sound power level
guaranteed
LwAg (dB)
Vibration value
AHV Hand/Arm
(m/s²)
Uncertainty
Hand/Arm (m/s²)
(K Factor)
LAWNKEEPER 600
70
68
70
LAWNKEEPER 1800
70
72
74
LAWNKEEPER 3000
55
72
74
CC 42 PO
84
94
96
5,0
1,5
CC 42 SPO
84
94
96
5,0
1,5
CC 46 PO
84
94
96
5,0
1,5
CC 46 SPO
84
94
96
5,0
1,5
CC 46 SPOE
84
94
96
5,0
1,5
CC 53 SPO
86
96
98
5,0
1,5
CC 53 SPO W
86
96
98
5,0
1,5
CC 46 SPB V HW
84
94
96
5,0
1,5
CC 53 SPB V HW
86
96
98
5,0
1,5
CC 46 SPB V
84
94
96
5,0
1,5
CC 46 SPBE V
84
94
96
5,0
1,5
CC 53 SPB V
86
96
98
5,0
1,5
CC 53 SPBE V
86
96
98
5,0
1,5
CC 53 MO
84
94
96
5,0
1,5
CC 53 MSPO
86
96
98
5,0
1,5
WIDE CUT E-START
88
98
100
5,0
1,5
CC 114 TD
88
98
100
5,0
CC 114 TA
88
98
100
CC 714 TF
88
98
CC 714 HF
88
CC 717 HG
88
CC 714 TE
Vibration value
AHV Body (m/s²)
Uncertainty
Body (m/s²)
(K Factor)
1,5
1,0
0,5
5,0
1,5
1,0
1,5
100
5,0
1,5
1,0
0,5
98
100
5,0
1,5
1,0
0,5
98
100
5,0
1,5
1,0
0,5
88
98
100
5,0
1,5
1,0
0,5
CC 714 HE
88
98
100
5,0
1,5
1,0
0,5
CC 1016 AF
88
98
100
5,0
1,5
1,0
0,5
CC 1019 HG
88
98
100
5,0
1,5
1,0
0,5
CC 1018 BHG
88
98
100
5,0
1,5
1,0
0,5
CC 1022 KHT
88
98
100
5,0
1,5
1,0
0,5
CC 1224 KHP
93
103
105
5,0
1,5
1,0
0,5
CC 1016 AE
88
98
100
5,0
1,5
1,0
0,5
ROBOTIC MOWERS
LAWN MOWERS
MINIRIDER
LAWN TRACTORS
CC 1018 HE
88
98
100
5,0
1,5
1,0
0,5
CC 1018 AN
88
98
100
5,0
1,5
1,0
0,5
CC 1019 HN
88
98
100
5,0
1,5
1,0
0,5
CC 1018 BHE
88
98
100
5,0
1,5
1,0
0,5
CC 1020 BHN
88
98
100
5,0
1,5
1,0
0,5
CC 1024 KHN
88
98
100
5,0
1,5
1,0
0,5
CC 1022 KHI
88
98
100
5,0
1,5
1,0
0,5
t.b.d.
t.b.d.
t.b.d.
5,0
1,5
1,0
0,5
GTX 2100
69
EMISSION OVERVIEW
Sound level
Vibrations
Sound pressure level
measured LpA (dB)
Sound power level
LwA (dB)
Sound power level
guaranteed
LwAg (dB)
Vibration value
AHV Hand/Arm
(m/s²)
Uncertainty
Hand/Arm (m/s²)
(K Factor)
Vibration value
AHV Body (m/s²)
Uncertainty
Body (m/s²)
(K Factor)
RZT-S 42
88
98
100
5,0
1,5
1,0
1,5
RZT-S 46
88
98
100
5,0
1,5
1,0
1,5
Z-FORCE SZ-48
93
103
105
5,0
1,5
1,0
1,5
TANK SZ-60
93
103
105
5,0
1,5
1,0
1,5
RZT 42
88
98
100
5,0
1,5
1,0
1,5
RZT 50
93
103
105
5,0
1,5
1,0
1,5
RZT 54
93
103
105
5,0
1,5
1,0
1,5
98
108
110
5,0
2,5
98
108
110
5,0
1,5
86
96
98
t.b.d.
t.b.d.
ZERO-TURN RIDERS
TILLER
RT 65
LEAF VACUUM
CSV 060
SCARIFIER
CC V 40 B
Sound
Definition: mechanical vibration or compressional wave of an elastic medium. The unit of measurement is decibel (dB). The human
pain threshold is approx. 130 db. The hearing distance of a human ear is in the a frequency range between 16 - 16.000 Hz. (below:
infrasound / above: ultrasound)
Acoustic pressure
Acoustic pressure is the measure, periodic changes in air pressure referred to by the sound wave.
Body-Vibration
These are vibrations, caused by the machine, transferred to the body through the hands, feet or bottom. (e.g. Lawn tractors)
Hand-Arm-Vibration
Transferred to the body from a handheld or walk behind machine through the hand and/or arm. (e.g. Trimmer, Lawn mower, Tiller, etc.)
l im
i te
ds
upp
l em
e nt a
r y per
formance according to
wa r
ran
t
yc
on
dit
i on
s(
se
e
o
w
ty
MT
D
n
ra
ar
Pr
od
ts
,
AG
ur
dit i
of t
he
n
co
bcadet.eu)
*
ww . cu
*Manufacturer's
on w
warr
anty
on s
3 YEARS WARRANTY FOR
ALL CUB CADET PRODUCTS
uc
cubcadet.eu
Benefit from a 3-years warranty when buying a Cub Cadet product!
* Manufacturer's warranty of the MTD Products AG,
limited supplementary performance according to warranty conditions
(see our warranty conditions on www.cubcadet.eu)
PLEASE ASK YOUR DEALER FOR MORE INFORMATION
ABOUT OUR EXTENDED WARRANTY PROGRAM.
REPLACEMENT PARTS
Your parts specialist
Perfect match, high durability.
Since November 2011 ARNOLD offers a various range of
wearing parts and accessories for gardening, forestry and
landscaping use all over Europe.
Cub Cadet spare parts
Additional to our variety of spare parts for all common
brands ARNOLD is offering high quality workshop equipment
and various accessories.
Designed for your machine
Offer the best performance & reliability
Only original parts get your machine warranty
Rapid and sustained availability in Europe
Tested according to our highest standards
71
cubcadet.eu
SERVICE AND MORE
........................................................................................
Cub Cadet equipment is only available from an authorized
Cub Cadet dealer, who can offer you a wide range of products
and services. The dealer aims to provide fast, convenient
service for you, whether you are interested in a new piece of
equipment or simply need more information about a product
or service.
Delivery service:
Each Cub Cadet dealer's sales staff is specially trained
in selling lawn and garden equipment as well as snow
throwers. They have been advising customers for many
years and will help you choose the right piece of equipment.
Large pieces of equipment that you are unable to transport
yourself can be delivered right to your door by the Cub Cadet
dealer.
Demonstration:
Repair service:
Your Cub Cadet dealer offers you the chance to start up
the equipment and try it out yourself before you buy. At
Cub Cadet, you know what you’re getting!
If your equipment ever breaks down, your Cub Cadet dealer
won’t send it away but will repair it in his own workshop.
Cub Cadet dealers specialize in providing repairs and
replacement parts.
Professional assembly:
Financing:
Cub Cadet dealers fully assemble all equipment so you can
start using it right away. Only well-assembled equipment and
thorough instructions guarantee satisfaction.
Would you like to pay for your new equipment conveniently
over the next few years? No problem! Your Cub Cadet
dealer can offer you a suitable financing option.
Art.No. 196-979-603
Professional advice:
Further information about Cub Cadet products: www.cubcadet.eu
European Headquarters:
MTD Products Aktiengesellschaft • Industriestraße 23 • D-66129 Saarbrücken • Tel.: 0049 (0) 68 05 / 79-528
Fax: 0049 (0) 68 05 / 79-401 • www.mtdproducts.eu • e-mail: [email protected]
© 2015 MTD Products Aktiengesellschaft, Germany. All rights reserved. Cub Cadet and other product signs are registered trademarks of the MTD Products Group.
For more information please visit our website: www.cubcadet.eu. Amendments due to misprint or errors are reserved. All prices with VAT, as long stock lasts.
(Revision: January 2015)