Displacement sensors - Solartron Metrology

Transcription

Displacement sensors
including
A special kind of service
Contents
Capability, quality, technology and choice
4
World leading expertise
World
World
leaders
leaders
linear
in linear
measurement...
measurement...
World
leaders
ininlinear
measurement...
Solartron
Metrology
is
innovation
andand
manufacture
of of
Solartron
Solartron
Metrology
Metrology
is aaworld
world
is aleader
leader
worldinleader
inthe
the
innovation
in the innovation
manufacture
and manufacture
of
precision
digital and
analogue
displacement
sensors,
dimensional
gauging
precision
precision
digital
digital
analogue
and analogue
dimensional
dimensional
gauging
gauging
probes,probes,
displacement
displacement
probes,
optical
linearoptical
encoders
and
associated
instrumentation.
transducers,
transducers,
optical
linear
encoders
linear
encoders
and associated
and
associated
instrumentation.
instrumentation.
Markets and applications
10
Position measurement solutions
Over 60 years service to industry
Solartron Metrology’s origins go
back to 1946 with a UK company,
Farrol Research and through
successive aquisitions by
Sangamo Weston, Schlumberger,
management, Roxboro Group and
AMETEK. We have been known
as Sangamo Weston Controls,
SangamoTransducers, Schlumberger
Industries Transducer Division and
ultimately, Solartron Metrology.
5 mm to 300 mm
High performance sensors
5 mm to 150 mm
Rugged sensors for harsh environments
3 mm to 50 mm
Compact and accurate LVDTs
2 mm to 20 mm
Global
Global
clout.
clout.
LocalLocal
nous.nous.
Global
strength.
Miniature and fast LVDTs
Local support.
Headquartered
Headquartered
in the UK,
in the
with
UK,
sales
with sales
offices offices
in the Americas,
in the Americas,
EuropeEurope
WithAsia,
sales
offices
in Europe,
and
andand
Asia,
distributors
and
distributors
in
in
the Americas, and Asia, and
over 30over
countries
30 countries
worldwide,
worldwide,
distributors in over 30 countries
around
around
90%our
of90%
our
production
of our
production
worldwide,
global
network
isensures
exported.
is exported.
that wherever you are a
Solartron Metrology specialist is at hand
Quality
Quality
to
the
tocore...
the
to provide
local
service
andcore...
support.
Headquartered
in
the
UK,
around
90%offices
Headquartered
Headquartered
in the UK,
in the
with
UK,
sales
with
sales offices
of our production is exported.
in the Americas,
in the Americas,
EuropeEurope
and Asia,
andand
Asia, and
distributors
distributors
in over in
30over
countries
30 countries
worldwide,
worldwide,
aroundaround
90% of90%
our production
of our production
is exported.
is exported.
The inherent reliability of Solartron Metrology
precision
technologies
provides
consistently
accurate
Where
Where
specials
specials
come
come
as
standard...
as standard...
performance whilst reducing the cost of ownership.
Headquartered
Headquartered
in the UK,
ininthe
with
UK,
sales
withoffices
sales offices
in the in the
Continuous
investment
design
and
manufacturing
Americas,
Americas,
Europe
Europe
and sensors
Asia,
andand
Asia,
distributors
and to
distributors
in over
ensures
that
Solartron
continue
match
andin over
30often
countries
30 countries
worldwide,
worldwide,
around
90%
90%
our
production
of our production
exceed
the expectations
ofaround
usersofin
industry,
and aerospace.
isresearch
exported.
is exported.
19 mm
S series
12
19 mm
SR series
14
Optimum series
16
SM series
MD series
DF series
18
9.52 mm
from
6 mm
Sensor digital network
20
RS232, USB and ethernet interfaces
12 mm and 25 mm
Linear encoders wirh sub micron accuracy
LE series
23
SI 1000
SI 3000
24
±5 Vdc, 0-10 Vdc, 4-20 mA, TTL output
www.solartronmetrology.com
2 www.solartronmetrology.com
M
FU 6
LL x 1
T .0
0
.0
17
0
.0
16
5
.
±0
B
.
Other Solartron Metrology products
Gauging
Specialist gauging
Gemco series
32
Solartron
Solartron
Metrology
Metrology
is part
ofisAMETEK,
part of AMETEK,
a
a
Solartron
Metrology
is part
leading
global
leadingmanufacturer
manufacturer
of electronic
of electronic
of AMETEK,
aglobal
leading
global
instruments
instruments
and electric
andmotors
electricwith
motors
annual
with annual
manufacturer
of electronic
salesinstruments
of more
sales than
ofand
more
$2.1billion.
than motors.
$2.1billion.
AMETEKAMETEK
Inc has Inc has
electric
approximately
approximately
10,000 employees
10,000 employees
at plantsatand
plants and
operations
operations
in the United
in theStates
Unitedand
States
30 other
and 30 other
countries.
countries.
43
3
P
22
28
TI
Rest assured that wherever you are, whatever your application, we have the
technology, the commitment and the resources to help you make it better.
Dimensional drawings
00
measurement
solutions
associated
electronics,
some
of
Headquartered
Headquartered
in the UK,
inand
the
with
UK,
sales
withoffices
sales
offices
in the Americas,
in the capable
Americas,
withstanding
the
most
extreme
environments.
Our
plug
and
go
Orbit3
EuropeEurope
and Asia,
andand
Asia,
distributors
and distributors
in over in
30over
countries
30 countries
digital network is astonishingly simple to configure and use and with
worldwide,
worldwide,
aroundaround
90% of90%
our production
of our production
is exported.
is exported.
the introduction of our MyLVDT specials service, our commitment to
customer support extends further than any other manufacturer.
26
Ø8
.
Orbit
Orbit
3. The
3. digital
The digital
network
network
makes
that makes
Where
specials
come
asthat
standard.
perfect
perfect
sense.
sense.
Solartron
Metrology
offer a broad range of both analogue and digital
OD series
DRC, ATM
BICM
00
Precision high bandwidth signal conditioning modules
00
Single and dual channel, limits, I/O, data logger...
Ø6
.
Stand-alone displays and controllers
Ø 1
1 8 9 .0
.8 0
0
Quality to the core.
Performance products with a twist...
Configure our standard range to create the optimium
measurement solution for your application
CONTROL
To create the perfect package for
your application...
CONTROL
FEEDBACK
POSITION
...combine high performance
digital and analogue data
collection...
The culmination of Solartron‘s 50+ years of
experience manufacturing LVDT displacement
sensors is a deep understanding of the
need to match the performance of a sensor
precisely to the demands of the application
and environment. The cost and performance
advantage in matching the best sensor to the
requirement is clear, this can only be done with
a company that has both an extensive range
of sensors, accessories and electronics in
conjunction with a philosophy of designing “My
LVDT” to customers specific requirements.
...with powerful, flexible and
resilient data processing...
An extensive range of analogue and digital
sensors requires an equally extensive range of
electronics and signal conditioning. The ability
to transfer fast relaible data from a sensor even
in harsh environments is made possible by
Solartron‘s well proven Orbit3 Sensor Network.
Orbit3 introduces the abiity to network third party
sensors such as pressure, force, strain and
temperature using a common protocol.
POSITION
...for precision linear measurement
whatever your industry.
Solartron precision measurement solutions
perform vital tasks in a diverse range of
throughout industries including...
Aerospace, pharmaceutical, medical, power
generation, oil and gas, paper making,
civil engineering, tunneling, semiconductor
manufacturing, mining, glass making,
water treatment, chemical processing, steel
production...
The list is endless.
FEEDBACK
4
5
Measuring
range
At Solartron Metrology our vastly
experienced design team has for
many years, collaborated with
customers’ design teams to produce
successful and cost effective bespoke
measurement solutions.
1 mm to > 1 m
Drawing on this experience MyLVDT
formalises this approach and puts our
expertise in the spotlight.
Accuracy
Microns
Sensor
dimensions
Environmental
protection
Sub miniature
to long range
Temperature
Vibration
Shock
Hermetic
Submersible...
Your input...
Mechanical
Electrical
Carrier
Springs
Rod ends
Power supply
Internal electronics
External electronics
Output type
With a knowledge base of sensor,
electronics and software design
spanning decades, we can work with
you to identify, design, prototype and
manufacture a novel solution to fit
your application and your budget.
If you have a seemingly intractable
llinear measurement problem we
need to talk.
...our output.
MyLVDT: a special kind of service
Engineering
Coil design
Mathematical
modelling
3D CAD
Specials as
standard
High speed
modular design
Manufacture
Advanced
machine shop
Precision coil
winding
Networked
solutions
Orbit®
Quality
systems
ISO 9000
ATEX
Global technical
support
Asia, Europe, USA
The path to measurement perfection
u u u u u
Consultation
6
u u u u u
Specification agreement
3D modelling
u u u u u u u u
Prototyping
u u u u u
Manufacture
u u u u u
Result: the precise
position sensing
package for your
exact application
7
Quality to the core
Core technology
Simplicity of operation is the main strength of an LVDT, but to
produce a reliable and stable sensor requires meticulous attention
to detail in its design and manufacture.
Principle of operation
Conventional LVDT
An LVDT Displacement Sensor works
by moving the core through the
body. The position of the core within
the body is detected by coils wound
on the bobbin.
When the core is in a central position, the coupling from the primary (VEXC) to each
secondary is equal, so VA=VB and the output V0UT= 0. As the core is displaced VA
differs from VB, and the output V0UT changes in magnitude and phase in proportion
to the movement.
p
Highly stable and clean signal
conditioning is essential to get the
best performance from an LVDT
sensor.
p
Electron beam welding on all
submersible sensors ensures that
there is no contamination within the
weld that can lead to corrosion.
p
Precision wound coils on highly stable
bobbins provide excellent linearity and
temperature coefficients.
p
Mu metal screening gives improved
protection against electromagnetic
fields on some models.
The coils are supplied with an ac
signal and return an ac signal.
This signal is then processed by
conditioning electronics to provide a
measure of the core position.
The body is normally mounted on the
static part of an element and the core
attached to the moving part.
Core benefits
Absolute positioning
p
Solartron‘s sensor bodies, core
carriers and end caps are made from
high grade stainless steel.
Does not lose position during a power
down and does not suffer from over
speeding like incremental sensors
making it ideal for closed loop control.
Linearity
Solartron LVDT
Solartron Metrology’s continuous development of precision bobbin mouldings
and multi chambered coil windings ensure excellent linearity and thermal stability
throughout the range.
Ruggedness
A universal truth: data is only of true value when
it is processed from a reliable source...
Tried, tested and
approved...
With good choice of materials and
design the Displacement Sensor is
perfect for harsh environments.
Infinite resolution
Integral electronics, high performance external electronics, single or multichannel
digital communication from absolute displacement sensors provide the ultimate in
system performance.
Ideal for detecting very small changes
of position when used with Solartron‘s
precision signal conditioning.
Repeatable
Sub micron repeatability provides
perfect limit or closeloop control.
Dynamic response
Free core sensors, fitted with low
mass cores provide excellent dynamic
response up to several kHz when
used with Solartron‘s precision signal
conditioning.
Flexibility
✓
RoHS
Linearity
Solartron Orbit3
digital sensors
Solartron Metrology digital sensors
are calibrated using a traceable
interferometer and are issued with
a calibration certificate. All digital
sensors are fitted with integrated
electronics, which store information
such as probe ID, range, calibration
error, etc. Digital sensors provide
superior performance compared
to traditional analogue sensors.
Performance figures quoted in this
catalogue include all mechanical
errors within the probe head together
with any errors in the electronics
interface modules.
Solartron‘s design engineers can
design sensors to fit your application.
(MyLVDT).
Compliant
8
9
Applications in industry
Applications in laboratory and test
Position feedback
Displacement measurement
CONTROL
POSITION
Energy
Transport
Test machines
Structures
Power generation
Wind turbine
Oil and gas
Aerospace
Rail
Off-highway
Automotive
Drones
Traction
Compression
Creep & Stress
Flexion
Fatigue
Building
Bridge
Barrage
Cracks
Soil
FEEDBACK
Data
Examples
Examples
uPosition feedback
uLevel measurement
uMachine alignment
uAssembly checking
uInjection monitoring
uClose loop control
uTool positioning
uMovement control
uLift position control
uDistance control
uCracks monitoring
uStructure monitoring
uAlignment measurement
uDeformation measurement
uExpansion displacement
uContraction displacement
uCrush displacement
uDeflection measurement
uResearch
Fluid power
Hydraulics
Servo valves
Pneumatics
Solenoids
Automation
Assemby
Robotics
Electronics
Mechatronics
Metal forming
Metrology
Hardness
CMM
Calibrators
Dimension
Bench test
Wood
Metal
Aerospace
Agronomy
Automotive
www.solartronmetrology.com 11
S series
Generic Sensor types
LVDT
Voltage Output (±DC Bipolar)
Voltage Output (DC Unipolar)
Current Output (4-20mA)
Digital Output (Orbit)
High performance displacement sensors
AS/2.5
VS/2.5
VS/5
IS/5
DS/5
AS/5
VS/5
VS/10
IS/10
DS/10
AS/7.5
VS/7.5
VS/15
IS/15
DS/15
AS/10
VS/10
VS/20
IS/20
DS/20
AS/15
VS/15
VS/30
IS/30
DS/30
AS/25
VS/25
VS/50
IS/50
DS/50
AS/50
VS/50
VS/100
IS/100
DS/100
AS/75
VS/75
VS/150
IS/150
DS/150
AS/100
VS/100
VS/200
IS/200
DS/200
AS/150
VS/150
VS/300
IS/300
DS/300
±2.5
±5
±7.5
±10
±15
±25
±50
±75
±100
±150
Measurement
u<0.2% Linearity
u19mm Stainless Steel body
uIP65 and IP67 option
uExcellent measuring range to body length
uMultiple output options with integrated electronics
uLarge bore to core clearance for ease of installation
uExcellent magnetic screening
uWide range of signal conditioning and instrumentation
Measurement Range (LVDT/±DC) (mm)
The S Series Displacement Sensor
is the cumulation of many years
experience gained from Solatron‘s
pedigree of a history of excellent
displacement sensors coupled with
attention to market feedback. The
result is a large range of sensors
both “off the shelf” and “customer
specials” that is better able to satisfy
today’s demanding manufacturing
and research applications.
Tip Force ±20% (Horizontal at middle of range) N
Measurement Range (4-20mA/DC/ORBIT) (mm)
5
10
15
20
30
50
100
150
200
300
Pre-travel ±0.5 mm (Guided Versions only)
2.0
3.0
1.6
3.1
6.7
6.9
4.9
5.0
8.8
16.2
Post Travel ±0.5 mm (Guided Versions only)
4.3
5.3
3.9
5.6
9.0
9.3
7.3
7.4
11.1
18.6
Resolution µm1
<0.1
<0.1
<0.1
<0.2
<0.2
<0.3
<0.5
<0.7
<1.0
<2.0
Temperature Coefficients (%FSO/°C) LVDT
<0.02
<0.01
<0.01
<0.01
<0.01
<0.01
<0.01
<0.015
<0.01
<0.01
Linearity (% FSO)
<0.20
Temperature Coefficients (%FSO/°C) DC/4-20mA
<0.25
< 0.01
Mechanical
Body diameter (mm)
19 (+0.0, -0.2)
Case material
300 Series Stainless Steel
Core material
Nickel Iron
1.1
1.0
1.0
1.1
1.2
Cable Type
2.1
1.9
2.3
2.6
F.E.P.
Standard cable Length (m)
3
Standard cable Style
B
Nominal Mass (g) LVDT
1.5
58
66
67
80
92
110
153
167
243
344
Nominal Mass (g) (4-20mA/DC)
72
80
81
94
106
124
167
181
257
358
Nominal Mass of Core (g)
2.6
5.0
5.8
7.2
6.4
6.6
9.0
9.0
9.0
9.0
Environment
The S base series has been
expanded to include the SR
(Rugged range).
Temperature (Standard LVDT) (°C)
-40 to +120
Temperature (HT LVDT)) (°C)
-40 to +200
Operating/Storage Temperature (4-20mA/DC) (°C)
0 to +65 / -20 to 85
Sealing
IP65 or IP67
Vibration Sinusoidal
Standard output options
Mechanical options
Connection options
Vibration Random
uLVDT
u±5V DC
u±10V DC
u0-5V DC
u5-0V DC
u0-10V DC
u10-0V DC
u4-20 mA
u20-4 mA
uSolartron Orbit (Digital)
uTTL
uFree Core
uFree Core /Carrier
uGuided Core
uTip
uSpring
uUniversal Joints
uCable (wire ends)
uCable + Connector
uAxial Connector
uPIE (Orbit digital only)
Shock
1 to 10g rms linear 10 to 50 Hz & 10g rms 50Hz to 1kHz
DO160F Curve D
Drop test from 1m onto hard surface
Electrical Interface (LVDT)
Energising Voltage
1-10 (Vrms)
Energising Current at 5kHz (mA/V)
1.0
2.6
2.2
0.7
1.5
0.5
0.6
2.5
1.65
1.83
Sensitivity at 5kHz ±10% mV/V/mm
144
178
121
76
60
21.5
15
10.5
6.9
3.9
Electrical Interface (4-20mA & DC)
Input
For non-standard sensors please contact your
local Solartron Sales Office or Distributor
(see back cover)
10 to 30 V or 4-20mA loop powered
Noise (DC Output) measured in 500Hz
<0.2 mV
Output Change with Power Supply Variation
<0.5 mV
Bandwidth (-3dB)
500Hz
Electrical Interface (Orbit)
Bandwidth
Output
Power (VDC)
Up to 460 Hz (selectable)
Solartron Orbit
5±0.25 @ 0.06A
Sealing
Weight (grams)
Probe Interface electronics
T connector (including DIN rail adaptor)
Also see...
Sensor dimensions/drawings
Page 28
u
Orbit interface dimensions/drawings
Page 41
u
IP43
52
46
Note 1: Resolution specification is only applicable to ORBIT digital sensors.
The resolution of LVDT sensors is effectively infinite and is only limited by the conditioning electronics.
Cable Style A comprises of individual twisted cores. Cable Style B comprises a sheathed and screened cable
SR series
Generic sensor Types
LVDT
Voltage Output (±DC Bipolar)
Voltage Output (DC Unipolar)
Current Output (4-20mA)
Digital Output (Orbit)
High performance rugged displacement sensors
RAS/2.5
RVS/2.5
RVS/5
RIS/5
RDS/5
RAS/5
RVS/5
RVS/10
RIS/10
RDS/10
RAS/7.5
RVS/7.5
RVS/15
RIS/15
RDS/15
RAS/10
RVS/10
RVS/20
RIS/20
RDS/20
RAS/15
RVS/15
RVS/30
RIS/30
RDS/30
RAS/25
RVS/25
RVS/50
RIS/50
RDS/50
RAS/50
RVS/50
RVS/100
RIS/100
RDS/100
RAS/75
RVS/75
RVS/150
RIS/150
RDS/150
±7.5
±10
±15
±25
±50
±75
Measurement
Measurement Range (LVDT/±DC) (mm)
uRugged construction for use in demanding environments
uPressure tested to 100 bar
u0.2% Linearity
u19mm Stainless Steel body
and core carrier
uIP68 with axial connector
uMultiple output options with integrated electronics
uScrew Mount Options
uExcellent magnetic screening
Measurement Range (4-20mA/DC/ORBIT) (mm)
±2.5
±5
5
10
15
20
30
50
100
150
Pre-travel ±0.5 mm (Guided Versions only)
1.5
2.7
2.5
3.4
6.4
6.6
4.6
4.7
Post Travel ±0.5 mm (Guided Versions only)
1.1
1.7
1.4
2
4.5
5.3
3.8
3.7
<0.1
<0.1
<0.1
<0.2
<0.2
<0.3
<0.5
<0.7
<0.022
<0.016
<0.032
<0.031
<0.013
<0.015
<0.025
<0.026
1.5
2.1
1.9
Linearity (% FSO)
Resolution µm1
Temperature Coefficients (%FSO/°C) LVDT
0.20
Temperature Coefficients (%FSO/°C) DC/4-20mA
<0.03
Mechanical
Body diameter (mm)
19 (+0.0, -0.2)
Case material
Solartrons well proven and popular
S Series provided the ideal platform
for the SR ruggedized sensor
range, specifically developed
for challenging environments in
lab & test and process control
applications.
1.0
0.9
1.0
Cable Type
Mounting options
Environmental ratings for the SR
series have been increased to IP68
or fully Hermetically sealed. Extra
high temperature versions are also
available in LVDT format and Orbit
Digital (sensor only).
1.1
1.2
Mineral Insulated + F.E.P.
3
TYPE MIL-C-26482 Series 1
Nominal Mass (g) LVDT
59
65
72
81
93
110
151
190
Nominal Mass (g) (4-20mA/DC)
76
87
95
101
121
136
176
216
Nominal Mass of Core (g)
2.6
5.0
5.8
7.2
6.4
6.6
9.0
9.0
Environment
Operating/Storage Temperature (LVDT) (°C)
Submersible SR
Available as both Screw or standard mount.
1 Metre of MI (mineral insulated) cable and
3 Metres of FEP cable is standard fit. Other
lengths are available on request.
-40 to +120 / -40 to +120
Operating/Storage Temperature (4-20mA/DC) (°C)
0 to +65 / -20 to 85
Sealing
IP68 with axial connector. Sealed up to 100 bar with MI cable
Vibration Sinusoidal
1 to 10g rms linear 10 to 50 Hz & 10g rms 50Hz to 1kHz
Vibration Random
DO160F Curve D
Shock
Drop test from 1m onto hard surface
Energising Voltage
Standard Mount
Screw Mount
1.0
2.6
2.2
0.7
1.5
0.5
0.6
2.5
Standard Mount sensors are available as Free
Core or Guided armature. Spring Return is
an optional extra with an external spring on
guided versions. Measuring ranges (total)
5mm to 300mm.
Screw Mount sensors have a Captive
Armature with an anti-rotation guide and an
internal spring. Measuring ranges (total) from
5mm to 150mm.
139
125
59.5
60
52.5
17.7
11.8
8.4
Standard output options
Mechanical options
Connection options
uLVDT
u±5V DC
u±10V DC
u0-5V DC
u5-0V DC
u0-10V DC
u10-0V DC
u4-20 mA
u20-4 mA
uSolartron Orbit (Digital)
uFree Core
uFree Core /Carrier
uGuided Core
uCaptive Guided Core
uTip
uSpring
uCable (wire ends)
uCable + Connector
uMI Cable
uAxial Connector
uPIE (Orbit digital only)
1-10 (Vrms)
For non-standard sensors please contact your
loca; Solartron Sales Office or Distributor
(see back cover)
Electrical Interface (4-20mA & DC)
Input
10 to 30 V or 4-20mA loop powered
Noise (DC Output) measured in 500Hz
<0.2 mV
Output Change with Power Supply Variation
<0.5 mV
Bandwidth (-3dB)
500Hz
Bandwidth
Output
Power (VDC)
Sealing
Weight (grams)
The resolution of LVDT sensors is effectively infinite and is only limited by the
conditioning electronics.
Solartron Orbit
5±0.25 @ 0.06A
IP43
52
46
Also see...
Page 32
u
Page 41
u
Optimum series
Narrow bodied high performance sensors
uGood measurement range to body length ratio
uSmall body diameter
uLarger radial bore clearance
uRugged Construction
The Optimum Series of LVDT
sensors is an ideal choice for
process control and research
applications. The free core variants
are designed for precise linear
positioning and measurement of
moving parts where zero friction
and hysteresis is required within a
restricted space.
The free core version is available
with an optional light weight
core for mounting on to small,
rapidly moving structures without
affecting their performance and
integrity - important in some control
applications.
The lightweight core has a 1.9mm
diameter which improves core to
bore clearance, making alignment
easier. A light titanium core carrier
can be supplied on request.
The Optimum is also available as a
guided product and with universal
joints either as an LVDT or Digital
product for use in applications where
it is not posible to mount the core
and carrier on the moving part.
Note: the Optimum can be wired as
either differential output or ratiometric
(except OP/10)
Sensor
LVDT Free Core
OP/1.5/F
OP/6/F
OP/10/F
OP/12.5/F
OP/25/F
LVDT Guided
OP/1.5/G
OP/6/G
OP/10/G
OP/12.5/G
OP/25/G
DO/3
DO/12
DO/20
DO/25
DO/50
ORBIT Digital Guided
Measurement
Measurement Range (LVDT/Digital) (mm)
±1.5 / 3
±6 / 12
±10 / 20
±12 / 24
±25 / 50
Total mechanical travel ±0.5 (mm)
3.6
15.2
23.2
29.8
TBA
Pre-travel (guided only) (mm)
1.78
1.53
1.53
2.33
TBA
<0.2
<0.4
93
TBA
Linearity (% FSO)
<0.25
Resolution µm1
<0.1
Temperature Coefficients (%FSO/°C)
<0.05%
Mechanical
Body diameter (mm)
9.52
Case Material
66
94
94
Cable Type
F.E.P.
5 (max)
A or B
Nominal Mass (g)
Nominal Mass of Moving Parts (g)
7
12
12
20
TBA
1.5
2.5
2.0
3.5
TBA
7
TBA
Environment
Operating Temperature (Sensor) (°C)
-40 to +150
Storage Temperature (Sensor) (°C)
-40 to +150
Sealing
IP65
Energising Voltage
1-10 (Vrms)
6
4.5
Frequency Response (-3db) Hz
3.2 at 20 kHz
Depends on Electronics and Sensor Configuration
108
78
85 at 20 kHz
69
TBA
Zero phase frequency (kHz)
13.1
24.1
>30
24.8
TBA
Bandwidth
Output
Solartron Orbit
Power (VDC)
5±0.25 @ 0.06A
Sealing
IP43
Weight (grams)
52
46
Cable Style A comprises of individual twisted cores Cable Style B comprises a sheathed and screened cable
Also see...
Page 37
u
Page 41
u
SM/MD/DF series
Miniature displacement sensors
SM
MD
DF
Sensor
LVDT with Free Core
SM1
Half Bridge (HB) with Free Core
SM3
-
M6D1
MD1
MD2.5
MD5
MD10
M6DH1
MD1H
MD2.5H
MD5H
MD10H
-
DC Output with Free Core
-
DF1
DF2.5
DF5
DC Output with Guided Core
-
DFg1
DFg2.5
DFg5
±1
±2.5
±5
Measurement
Measurement Range (mm)
±1
Linearity (% FSO)
Linearity (% Reading)
Resolution µm
±3
±1
±2.5
±5
±10
0.25
-
0.30
-
0.5
-
<0.1
1
Temperature Coefficients (%FSO/°C)
±1
<0.2
<0.03%
see Note 1
<0.01%
<0.025%
Mechanical
Body diameter (mm)
9.52
6h6
8h6
Case Material
uRugged construction
uShort body length
uGood performance
SM sensors cover two standard
types in two measurement
ranges ±1mm and ±3mm. They
are designed for measuring
displacement in applications where
infinite resolution and precise
repeatability is required in a very
small size.
The coils are wound on a PPS (40%
GL) former and housed in a stainless
steel case. The epoxy bonded
construction makes the device
suitable for operation in wet and oily
environments and in applications
with high levels of mechanical stress.
The core carrier assembly moves
friction free within the sensor, an
alternative option where the core
is provided threaded at both ends
is available allowing the user to
manufacture their own carrier
interface. Recommended carrier
material is titanium.
uSmall diameter
uRight angle cable outlet option
uLow core weight
uScreened cable
The small case diameter (6mm and
8mm) allows for easy installation
in confined spaces. A right angle
output facility is available as a retrofit
for the 8mm version.
The low core weight makes this
range ideal for use in low inertia
systems. Cross talk is prevented
by the screened cable, which also
allows for multiple use of these
sensors in close proximity.
uMeasurement range to 10mm
uHigh Output
uExcellent repeatability
uLow power
The DF dc miniature displacement
sensor has a friction-free core and
the DFg has a free guided core
incorporating Delrin bearings. All
types incorporate a linear variable
differential transformer (LVDT) as
the measuring source together
with oscillator, demodulator and
filter providing a self-contained unit
accepting a DC input and providing
a DC output relative to armature
position.
With high linearity and low mass
of moving parts, these are
ideally suited to applications in
civil, mechanical, chemical and
production engineering. Also, when
mounted in a suitable load-sensitive
member such as a proof ring or
diaphragm, they can provide load or
pressure measurement.
19.0
400 Stainless Steel
Cable Type
PU
0.5
2
3
A
B
Nominal Mass (g)
6.0
8.0
2.6
Nominal Mass of Moving Parts (g)
0.50
1.50
0.10
5.0
7.6
0.20
8.5
13.0
26.0
26.0
30.0
0.30
0.70
1.00
1.00
1.20
Environment
Operating Temperature (°C)
-40 to +85
-10 to + 80
-5 to +70
Storage Temperature (°C)
-40 to +100
-40 to +105
-10 to + 80
Sealing
Splash Proof
Electrical Interface
Energising Voltage
Energising (LVDT) Current at 5kHz (mA/V)
1-10 (Vrms)
3.8
Energising Current (HB) at 10kHz (mA/V)
1.8
-
3.0
1.8
2.0
1.0
0.6
-
1.2
1.0
-
1.2
-
-
Energising Current (DC) at 10V (mA)
-
frequency Response (-3db) Hz
142
Sensitivity (HB) at 10kHz ±10% mV/V/mm
10
13
Depends on Conditioning Electronics
50
75
-
75
54
Sensitivity at 10VDC ±10% mV/V/mm
17-24 (VDC)
136
269
210
150
105
33
-
88
83
82
51
33
-
-
Cable Style A comprises of individual twisted cores Cable Style B comprises a sheathed and screened cable
Also see...
Dimensions and drawings
Page 38
u
digital network
controllers and modules
Controllers
uUSB, RS232 and
ethernet interfaces
Controllers
The complete Orbit3 product
range is vast. For full
information refer to Solartron’s
Orbit3 catalogue or our
website.
USB Interface
Module (USBIM)
RS232 Interface
Module (RS232IM)
Ethernet Interface
Module (ETHIM))
USB 2.0 full speed
RS232 (up to 115.2 kB)
Ethernet
Computer Interface
Bus
Operating system
Microsoft Windows
Network Interface
Number of Orbit modules (with/without PSIM)
Baud rate
Measurement Modes
150/4
150/0
187.5 kB, 1.5 MB, 2.25 MB
187.5 kB, 1.5 MB
Standard and Dynamic
Typical reading rates (rdgs/sec)
Standard
Up to 3906
250
460
Power and Environment
Current at 4.75 V to 5.25 V DC (mA)
250
62
The Orbit3 Digital Network system
for single or multiple channels is
the solution to get fast and reliable
data from displacement sensors
and, for example, third party
pressure, temperature and rotary
sensors, quickly and easily into a
computer or PLC.
Orbit software
Solartron provide an Orbit library fully
compatibility with Windows 7 and all
64 bit Windows operating systems.
OrbMeasureLite is an out of the box
application for small networks which
includes seamless interfacing to
Excel.
Network components
Attached to the end of each sensor
is a hot swappable PIE (Probe
Interface Electronics) which clips into
a T-CON nertwork connector fitted
with a detachable 35 mm DIN rail
mount.
The completed module simply
pushes together with other modules
to form an integrated scaleable
network.
q
t
A power supply interface module
(PSIM), contoller modules and
interface modules complete the
package (see over for details).
t
Orbit3 modules
simply push
together to provide
a compact and
elegant digital
network
PIE
Strong light
weight body with
screening against
electrical
interference to
EN61000-6-2
Modules
uAIM: for third party sensors
uSGM: for strain gauges
and load cells
uEIM: for linear encoders
and line scales
uDIOM: for contol of
inputs and outputs
Modules
T-CON
Strong lightweight
construction
holding the sensor
address to enable
HOT SWAP facility.
Improved clamping
and IP65 option
Input Voltage (VDC)
Input Current (mA)
DIN Rail mount
as standard.
Removeable to
enable alternative
mounting options
Encoder Input
Module (EIM))
Strain Gauge
Module (SGM)
Digital input-output
Module (DIOM)
Voltage or Current
Incremental Encoder (TTL)
Strain Gauge
8 channel Input/Output
0-24, 0-10, 0-5, ±10, ±5
max. 30
-
0 to 30
4-20, 0-20, ±20
< 10
-
1 per Channel
5V AC
Up to 8, open drain up to
30 V @ 50 mA
0.02
-
Voltage Output
-
Network Interface
Measurement Modes
Linearity (%FSO)
t
Analogue Input
Module (AIM)
Inputs/Outputs
Input Type
t
Orbit measurement modes
Orbit supports a number of different
measurement modes for different
applications.
In Standard mode each module is
read as required whereas Dynamic
mode provides a means of rapidly
reading synchronised modules up to
3096 readings per second.
Indicator lamps
show power within
limits and data
transmission
active
0 to +60
Standard/Dynamic
0.05
Bandwidth (Hz)
460
-
49
42
Power and Environment
Current at 4.75 V to
5.25 V DC (mA)
Up to 154 depending
on type
0 to +60
digital probes
LE linear encoders
Solartron Metrology is the world‘s
largest manufacturer of ‘pencil’ style
electronic gauging probes.
Other methods of actuation include
pneumatic and vacuum retract with
LVDT, half bridge and Orbit variants.
Featured here are standard spring
push sensors from our Orbit digital
range.
Specialist gauging sensors are
also available - visit our web site for
details.
Standard spring actuated probes
Axial Cable Outlet
Radial Cable Outlet
DP/2/S
DP/5/S
DP/10/S
DP/12/S
DP/20/S
DP10/2/S
DPR/2/S
-
DPR/10/S
-
DPR/20/S
-
2
5
10
12
20
2
Body Diameter
Measurement Range (mm)
The Linear Encoder range of
measuring sensors uses a highly
stable and accurate optical sensor
in conjunction with precisely
manufactured bearings for use in
applications requiring consistent sub
micron measurement accuracy.
8h6
Pre-Travel (mm)
0.15
Over Travel (mm)
0.85
Accuracy (% reading)
0.05
8.85
0.06
Repeatability (µm)
-
0.07
0.05
0.7
< 0.01
< 0.05
Data Speed - user selectable
-
< 0.01
Sealing
Orbit
TTL
Orbit
Measurement range (mm)
12
25
13
26
±0.4
±0.5
0.5
depends on electronics
0.5
See table below
-5 to +80
Reference mark position (mm)
IP65
Maximum gauging speed (m/s)
An alternative interface method to
Orbit, the ATM provides a solution to
simple PLC interfacing for Solartron
sensors.
Resolution (x4 interpolation)
Repeatability
Solartron Gauging and Displacement Sensors
0.5 mm to 150 mm depending on sensor
Up to 0.15% reading depending on sensor
0.1 µm
<0.15 μm depending on sensor
Output Signal
Output frequency (kHz)
Bandwidth
EMC
Operating temperature (°C)
Storage temperature (°C)
+5 ±0.25 VDC @ 100 mA
A and B, /A and /B TTL square waves RS422 levels
50, 100, 125, 250, 360 & 500 (factory selectable)
See table below
-0.4 to -0.7
Quartz
Shaft material
Stainless Steel
Gaiter material
Viton
+10 to +50
-20 to +70
IP rating
Option 50/65 for spring actuation, 65 for pneumatic
Bandwidth
Solartron Orbit
Power (VDC)
5±0.25 @ 0.06A
Sealing
IP43
Weight (grams)
52
46
100 Hz
IP43 for ATM Module
TTL output gauging speeds
Emmisions: EN61000-6-3 Susceptibility: EN6100-6-2
Probe signal period
(µm)
Interpolation
Quad edge period
(µm)
0 to +60
0.4
X25
0.1
0.5
-20 to +70
0.2
X50
0.05
0.5
Also see...
0.1
X100
0.025
0.4
Page 39
u
0.05
X200
0.0125
0.2
Page 41
u
Refer to product manual 502724 for details of operation – contact sales office/web site
-0.35 to -0.5
Scale material
Environmental (electronics)
Sealing
0.5
0.1/0.6/0.5
Output
Electrical
Power
depends on electronics
Environment
Measurement
Accuracy (%FSO)
0.5
Mechanical
ATM TTL converter
Sensor types
±0.5
3 approximately from end stop
Temperature coefficient (µm/°C)
ATM analogue to TTL module
±0.4
0.1
Tip Force (N) Up/Down/Horizontal
uCompatible with all Solartron sensors
uWill not overspeed even at high resolution settings
uAbsolute position constantly accessible
uRange of resolution and frequency options
uStatus Indication lamps
TTL
Mechanical travel (mm)
Resolution (µm)
High grade polymer
Output
LE25
Repeatability ( µm)
Stainless steel
Gaiter
LE12
Accuracy (µm)
Up to 3906 readings per second
Case Material
Linear encoder
Measurement
< 0.15
Tip Force (N) at centre travel ±20%
Resolution (µm) - user selectable
uOrbit compatible
u12 and 25 mm measuring range
uSpring, free, pneumatic and
cable operation
u<0.4µm accuracy
u<0.02 resolution
uTTL output
Maximum gauging
speed (m/s)
SI 1000 series
SI 3000 series
Panel mount display / controllers
Twin axis display / controllers
u Red 7 digit display
u RS232 or RS485 Serial outputs
u VDC or 4-20 mA outputs
u Low, OK, High lamps and relays
u Peak Hold
u Intuitive menu
u 2 channel 7 digit colour displays
u 2 channel analogue colour displays
u Auto colour change for in/out range
u Auto course/fi ne resolution
u Peak hold facility
u Data logging facility
u RS232 output
u Discrete I/O
u 4-20mA or DC output
The Si 1000 series is a simple
to use, cost effective single
channel solution to a wide range
of laboratory and industrial linear
position monitoring and control
applications.
The versatile SI 1100 provides up to
0.1μ resolution when used with
Solartron’s LVDT Displacement and
Gauging sensors. A choice of VDC,
4-20 mA outputs and relays make
it easy to communicate with PLC’s.
RS232 and RS485 serial ports are
also standard.
Where long cable runs are required,
the SI 1300 is an obvious choice.
Two wire loop powered 4-20 mA
connection to Solartron’s S and
SR Series of rugged Displacement
Sensors completes a simple to
install system with impressive
performance. DC/DC operation
is also standard for use with DC
versions of the S and SR series.
The SI 1500 is a cost effective
yet versatile panel mount display
for use with Orbit® based Digital
Probes, Linear Encoders and
Modules.
Dimensions
Case size (incl. bezel)
H = 48mm x W = 96 x D = 137mm
Panel cut out
H = 44.5mm x W 93mm
Depth behind panel (inc. terminals)
135mm
Display
Display Type
7 digit red led
Display Update Rate
Up to 10 readings/second
Indicators
Low, OK and High warning lamps
Range
99.9999 to +99.9999
Resolution
1mm to 0.1um (user selectable)
Bandwidth/response time/sensor
reading rate
Up to 100 readings/second
Discrete Inputs
Zero, Peak(+Peak/-Peak/Difference), Hold
Outputs
Analogue
4-20 mA, -5V to +5V, -10V to +10V,
0V to +5V, 0V to +10V (selectable)
Discrete
Alarm Relay - Open Collector
Low, OK and High
Relay Response Time = 0.1-9.9 seconds (selectable)
Communications
Serial Port
RS232 or RS485 Configurable
Power
Specifically designed for use with
Solartron’s high performance Orbit®
network, the SI 3500 features an
intuitive, menu driven-twin axis display
which can be programmed to display
readings, set Limits/Alarms, Peak Hold,
Track, or act as a Data Logger for
inputs from one or two sensors.
LCD Display
Digital
2 x colour
Analogue
2 x colour horizontal bars
Update speed
40Hz
Display length (mm)
± xx.xxxxx (user selectable)
Display length (ins)
± x.xxxxxx (user selectable)
Resolution mm
Down to 0.05μm (user selectable)
Resolution ins
Down to 0.000005'' (user selectable)
Keypad
Membrane type with 9 keys
Print, Zero, Up, Down, Left, Right, Enter,
Peak Hold/Track, Menu
Measurement type
A, B, A+B, A-B, (A+B/2), (A-B/2), (B-A/a) X und Y
Data Logging
A, B, A+B, A-B, (A+B/2), (A-B/2), (B-A/a) X and Y
10,000 readings via switch or 1ms to 24hr time interval
Indications
mm/inch, Lower & Upper Limits, Out of Range,
Measurement Mode
Power requirement
+24 VDC ± 10%
External I/O
Serial
RS232 serial port (for printer or PC)
Discrete Output
2 x 3 isolated
Analogue Output
2 channels DC or 4-20mA
Environmental
Voltage
+24 VDC
Current
850 mA Max
Environmental
Front Panel
IP65
Case
IP51
Rear connection
IP51
EMC
Immunity: EN6100-6-2:2001
Emissions: EN61000-6-3:20011
Operating Temperature
10°C to 40°C
Storage Temperature
-10°C to 70°C
Electrical Immunity
EN6100-6-2:2007
-20 to +50
Electrical Emissions
EN61000-6-3:
0 to +50
Front Panel Sealing
IP65
Mechanical
Mounting
Bench top or panel mount
Dimensions WxHxD (mm)
Without bezel 134 x 65x160
With bezel 144 x 74 x 175
Signal conditioning modules
Module
OD2
OD4
OD5
DRC
BICM
13-42 VDC
10-30VDC
90-264VAC
10-30VDC
±15VDC
24VDC
140-50
250-100
160-70
±12
24
Power Requirement
Input Voltage
Input Current (mA)
<30
Frequency (Hz)
OD series
-
47-63
-
Sensor Excitation
Primary voltage (Vrms)
The OD series of conditioning
units is used to interface with
Solartron‘s sensors to provide
different functionality to suit different
applications.
0-9
Primary frequency (kHz)
3
5 or 13
2.5 or 5
1.2 - 21
-
5,10 or 13
5
Signal Input
Input Range
30-530mV/V1
55 to 5000mV LVDT full range
up to 3.5
Input Load (kΩ)
2
2, 10, 100
2, 100
100
The OD2 is a two wire 4-20mA
signal conditioner. It is designed for
long distance signal transmission
due to low noise susceptibility. A
cable break results in no current flow
indicating a fault.
Options
-
Forward and reverse polarity,
half bridge
see note 2
-
The OD4 (OD5 is a mains powered
equivalent) is a signal conditioning
unit powered from a single 1030VDC supply. The outputs are
fully adjustable allowing a range of
voltage and current outputs to be
selected.
Output Ripple
Signal Output
Voltage Output
-
Current Output
Up to ±10
4-20
Up to ±20 into 150Ω load
<38µA rms
<1 mV rms
Output Offset
-
<14
Up to 100% on maximum gain (coarse and fine adjustment)
Temperature Coefficient Gain (%FSO/°C)
<0.01
<0.03
Temperature Coefficient Offset (%FSO/°C)
<0.01
<0.02
Warm Up (minutes)
15 minutes
Linearity (%FSO)
<0.02
Bandwidth (-3dB) (Hz)
<0.1
25
500Hz, 1khz
250
-40 to +80
-20 to +80
-
Environmental
Storage Temperature
Operating Temperature
IP rating
0 to +60
65
-
40
None
IP40/67
IP40
Mechanical
Sensor connections
Terminals
DIN connector
-
Terminals
Solder tag or factory fit for IP67
Power connections
Terminals
-
IEC320 C14
-
-
Weight
Material
Mounting
Module
DRC DIN rail module
BICM in line module
ATM TTL converter
The DRC is a DIN rail mounted
version of the OD4 (see above).
The BICM provides a simple low
cost in line conditioning unit. This is
designed for use where the sensor is
in a harsh environment as the BICM
can be connected up to 10m from
the sensor. An IP67 variant of the
BICM is also available.
TTL RS 232 Differential Quadrature
is one of the most commonly used
methods of communication between
Linear Displacement Sensors and
Control or Data Acquisition Systems.
Its simplicity of Interfacing with
programmable systems also makes
Solartron‘s ATM one of the most cost
effective.
ABS
Painted Aluminium Box
Plastic
Plastic or Stainless Steel IP67
Holes
-
DIN rail
-
ATM TTL converter
Measurement
Sensor types
Accuracy (%FSO)
Resolution (x4 interpolation)
Repeatability
All Solartron Displacement Sensors
<0.25
0.1
sensor dependent
Electrical
Power
Output Signal
Output frequency (kHz)
Bandwidth
+5 ±0.25 VDC @ 100 mA
A and B, /A and /B TTL square waves RS422 levels
50, 100, 125, 250, & 500 (factory selectable)
100 Hz
Also see...
Environmental (electronics)
Sealing
Operating temperature (°C)
Storage temperature (°C)
Note 1: For sensors with sensitivity > 250mV/V,
an adjustable attenuator is required- contact
sales
Note 2: Sensor is connected via external screw
terminal user can therefore configure options
Note 3: For higher environmental levels(and other
custom options) contact sales office
IP43
Dimensions and drawings
Page 40
u
0 to +60
-20 to +70
Refer to product manual 502724 for details of operation – contact sales office/web site
S series
Dimensions (mm)
Guided Core, Spring Push and Universal Joints
Axial Connector / Guided Core
17.00
'C' ±0.5
17.00
'B' ±0.5
'F' ±0.5
M6 x 1.0-6g
(@ MID CALIBRATION/NULL POINT)
MATEABLE WITH
MIL-C-26482
SERIES 1 PLUG
Ø
'B' ±0.5
'A' ±0.5
'D' ±0.5
(FULLY EXTENDED)
'F' ±0.5
'D' ±0.5
(FULLY RETRACTED)
(FULLY EXTENDED)
Ø6.00
Ø6.00
(FULLY RETRACTED)
19.00
18.80
M6 x 1.0-6g
'A' ±0.5
Ø8.00
25.00
19.00
Ø18.80
32.00
Ø8.00
Ø2.20 MAX.
'C' ±0.5
M6 x 1.0-6g
M6 x 1.0-6g
S series
Dimensions (mm)
'E' ±0.5
(FULLY EXTENDED)
5.00
A = Body length
B = Carrier Protrusion From Front Face at Mid Range (null)
C = Null Point to End of Carrier at Mid Range
D = Carrier Protrusion From Front Face at Fully Out with Spring Fitted
E = Carrier Protrusion From Front Face at Fully Out with Tip Fitted
F = Carrier Protrusion From Front Face Fully Retracted
G = Distance from centre of UJ to front face at Mid Range
CF = Consult Solartron for this option
Range (mm)
LVDT
DC &
4-20mA
32.00
Ø6.00
28.75
'E' ±0.5
(FULLY EXTENDED)
9.00
44.75
A = Body length
D = Carrier Protrusion From Front Face Fully Extended
E = Carrier Protrusion From Front Face Fully Extended + Tip Fitted
F = Carrier Protrusion From Front Face Fully Retracted
CF = Consult Solartron for this option
'G' ±0.5
Guided Core, Spring Push and Universal Joints
LVDT
DC &
4-20mA
A
A
Range (mm)
All
B
C
D
LVDT
E
F
DC &
4-20mA
Axial Connector Guided Core
LVDT
DC &
4-20mA
All
A
A
B
C
D
E
F
5
68.4
101.4
32.6
64.8
40.0
55.1
27.6
87.4
118.4
40.0
82.0
51.0
66.1
30.5
G
±2.5
5
55.1
94.0
31.2
56.8
35.7
50.8
24.4
49.5
±2.5
±5
10
74.6
113.5
38.7
74.0
46.7
61.8
28.4
57.0
±5
10
±7.5
15
81.8
120.7
41.6
80.5
50.7
65.8
30.2
59.9
±7.5
15
94.4
127.9
42.9
88.5
55.0
70.1
32.4
20
109.4
142.4
49.8
102.5
66.0
81.1
35.0
124.4
156.4
59.3
119.3
84.0
99.1
36.1
±10
20
96.1
135.1
48.4
94.5
61.7
76.8
32.8
66.8
±10
±15
30
110.5
149.4
58.0
111.3
79.7
94.8
34.0
76.3
±15
30
±25
50
132.0
171.0
70.7
134.8
102.7
117.8
36.4
89.1
±25
50
145.4
178.4
72.1
142.8
107.0
122.1
38.6
100
202.4
235.4
107.1
206.5
164.9
180.1
50.7
±50
100
±75
150
±100
200
±150
300
GUIDED CORE CARRIER - IP RATING = IP65/IP67
160.7
175.8
48.5
124.0
±50
DIMENSIONS ARE
NOMINAL AND
SPECIFIED IN 269.5
MILLIMETRES 231.7
239.7
278.7
151.6
246.8
69.2
169.9
±75
150
253.4
286.4
153.0
227.5
236.0
251.1
71.4
200
309.4
341.4
184.2
337.5
296.0
CF
73.9
300
424.4
456.3
292.8
503.5
462.0
CF
125.0
189.5
228.5
105.7
198.5
297.2
336.2a policy of continuous
182.9
329.5
Solartron pursues
development.
Specifications
be changed without
412.1in this document
449.9 may therefore
291.5
495.5 notice.
540002-699 ISS 2 EDCR 19933
291.7
CF
71.8
201.2
±100
458.7
CF
122.9
309.5
±150
AXIAL CONNECTOR / GUIDED CORE CARRIER
691
S series dimensions (mm)
S series dimensions (mm)
Free Core and Free Core with Carrier
Axial Connector / Free Core and Free Core with Carrier
M6 x 1.0-6g
M6 x 1.0-6g
17.00
17.00
Core carrier
Core carrier
'D' ±0.5
'D' ±0.5
'B'@ NULL ±0.5
'B'@ NULL ±0.5
Ø2.20 MAX
Ø9.65
MATEABLE WITH
MIL-C-26482
SERIES 1 PLUG
'C' ±0.5
DC &
4-20mA
M4 BOTH ENDS (*)
'C' ±0.5
A = Body length
C = Core Length
D = Null Point to End of Carrier at Mid Range
E = Bore Depth (minimum)
Free Core and Free Core with Carrier
LVDT
* FOR CORE LENGTH 16.50
THREAD LENGTH = 6.00mm
Ø6.35
(M4 x 0.7-6H)
M4 BOTH ENDS (*)
A = Body length
C = Core Length
12.00 BOTH ENDS (*)
Core
Ø6.35
(M4 x 0.7-6H)
Ø 19.00
18.80
'A' ±0.5
12.00 BOTH ENDS (*)
Core
Range (mm)
'E' ±0.5
Ø19.00
18.80
'A' ±0.5
25.00
LVDT
Ø8.50
DC &
4-20mA
Range (mm)
All
LVDT
DC &
4-20mA
Axial Connector Free Core and Free Core with Carrier
LVDT
DC &
4-20mA
All
A
A
B
C
D
A
A
B
C
D
E
±2.5
5
33.4
72.4
40.5
16.5
55.3
±2.5
5
60.4
93.4
39.0
16.5
63.3
41.4
±5
10
53.0
91.4
48.0
29.0
72.5
±5
10
79.4
110.4
47.0
29.0
80.5
62.0
±7.5
15
60.1
99.1
50.9
34.0
79.0
±7.5
15
86.4
119.9
49.0
34.0
57.0
69.1
±10
20
74.5
113.4
57.8
40.0
93.0
±10
20
101.4
134.4
56.0
40.0
101.0
83.5
±15
30
88.9
127.8
67.3
37.5
109.8
±15
30
116.4
148.4
66.0
37.5
117.3
97.9
±25
50
110.4
149.3
80.1
38.5
103.3
±25
50
137.4
170.4
79.0
38.5
141.3
119.4
±50
100
167.9
206.8
115.0
50.0
197.0
±50
100
194.4
227.4
114.0
50.0
205.0
176.8
±75
150
218.1
257.1
160.9
50.0
268.0
±75
150
245.4
278.4
159.0
50.0
276.0
229.4
±100
200
275.6
314.7
192.2
50.0
328.0
±100
200
301.4
333.4
191.0
50.0
336.0
284.6
±150
300
390.4
429.5
300.8 AC & DC 50.0
S-SERIES
294.0
±150
300
416.4
448.3
299.0
50.0
502.0
399.4
FREE CORE (CARRIER) - IP RATING = IP65/IP67
SR series dimensions (mm)
Axial Connector / Guided Core
Axial Connector / Free Core
M6 x 1.0-6g
'C' ±0.5
17.00
M6 x 1.0-6g
17.00
Core carrier
MATEABLE WITH
MIL-C-26482
SERIES 1 PLUG
'D' ±0.5
Ø
'B' ±0.5
'A' ±0.5
Ø8.50
M6 x 1.0-6g
'B'@ NULL ±0.5
19.00
18.80
MATEABLE WITH
MIL-C-26482
SERIES 1 PLUG
'E' ±0.5
(FULLY RETRACTED)
(FULLY EXTENDED)
'A' ±0.5
12.00 BOTH ENDS (*)
Core
Ø8.00
'D' ±0.5
Ø6.00
'F' ±0.5
Ø 19.00
18.80
Ø6.35
(M4 x 0.7-6H)
M4 BOTH ENDS (*)
'C' ±0.5
32.00
'E' ±0.5
(FULLY EXTENDED)
A = Body length
C = Core Length
E = Bore Depth
A = Body length
C = Core Length
E = Fully Extended + Tip Attached
F = Fully Retracted
Range (mm)
LVDT
Axial Connector Guided Core
DC &
4-20mA
LVDT
DC &
4-20mA
Range (mm)
All
LVDT
A
A
B
C
D
E
F
5
68.4
101.4
31.8
65.0
35.8
50.9
28.1
±2.5
±5
10
87.4
118.4
39.1
83.1
46.8
61.9
32.4
±7.5
15
94.4
127.9
40.8
88.4
50.8
65.9
±10
20
109.4
142.4
48.4
103.1
61.8
76.9
±15
30
120.4
156.4
58.4
120.4
79.8
94.9
±25
50
145.4
178.4
71.2
143.9
102.8
±50
100
202.4
235.4
106.2
207.6
160.8
±75
150
253.4
286.4
152.1
278.6
231.8
246.9
±2.5
Axial Connector Free Core
DC &
4-20mA
LVDT
DC &
4-20mA
All
A
A
B
C
D
E
5
60.4
93.4
37.2
16.75
63.4
44.2
±5
10
79.4
110.4
44.5
29.00
80.5
63.2
31.9
±7.5
15
86.4
119.9
46.2
31.50
85.8
70.2
36.4
±10
20
101.4
134.4
53.8
39.00
100.5
84.2
38.9
±15
30
112.4
148.4
63.8
37.50
117.8
98.2
117.9
40.9
±25
50
137.4
170.4
76.6
38.50
141.3
120.2
175.9
52.4
±50
100
194.4
227.4
111.6
50.00
205.0
178.2
73.4
±75
150
245.4
278.4
157.5
50.00
276.0
228.2
AXIAL CONNECTOR / GUIDED CORE CARRIER
691
'E'
FULLY RETRACTED
MI Cable / Guided Core
M6 x 1.0-6g
Axial Connector / Captive Guided Core
MI Cable / Captive Guided Core
MI cable
1M OF PU CABLE
20.00
17.00
'D'
FULLY EXTENDED
22.50
Axial
Ø19.00
18.80
20.00
19.00
Ø18.80
'B' ±0.5
'A' ±0.5
17.00
M6 x 1.0-6g
'B' ±0.5
1M OF PU CABLE
BALL TIP
M2.5 X 0.45-6H
'C' ±0.5
M10 x 1.0-6g
17.00
THREAD 1/2"-20 UNF-2A
22.50
MATEABLE WITH
MIL-C-26482
SERIES 1 PLUG
'D' ±0.5
Ø6.00
(FULLY EXTENDED)
4.00
'F'
'A' ±0.5
A = Body length
D = Fully Extended
E = Fully Retracted
F = Adaptor Length
Range (mm)
LVDT
32.00
'E' ±0.5
(FULLY EXTENDED)
Axial Connector Captive Guided Core
DC &
4-20mA
LVDT
DC &
4-20mA
A
A
B
C
D
E
F
All
±2.5
5
65.9
98.9
44.7
76.4
48.7
41.1
35.0
±5
10
84.9
115.9
48.0
89.5
56.2
41.3
35.0
±7.5
15
91.9
124.4
50.2
95.3
60.7
41.3
35.0
±10
20
106.9
139.9
94.3
146.5
106.2
82.3
76.0
±15
30
117.9
153.9
101.8
161.3
121.2
82.3
76.0
±25
50
142.9
175.9
112.5
182.3
140.2
82.3
76.0
A = Body length
D = Fully Extended + Spring Attached
E = Fully Extended + Tip Attached
Range (mm)
LVDT
LVDT
±2.5
AXIAL CONNECTOR & MI CABLE / CAPTIVE GUIDED CORE CARRIER
DC &
4-20mA
MI Cable Captive Guided Core
LVDT
DC &
4-20mA
693
MI Cable Guided Core
DC &
4-20mA
LVDT
DC &
4-20mA
All
A
A
B
C
D
E
5
63.5
101.5
32.4
66.0
35.8
50.9
82.5
120.5
40.3
83.1
46.8
61.9
SR-SERIES AC & DC
Range (mm)
Ø8.00
M10 x 1.0-6g
'C' ±0.5
±5
10
All
±7.5
15
90.0
128.0
41.6
88.4
50.8
65.9
20
104.5
142.5
49.1
103.1
61.8
76.9
30
118.5
156.5
59.5
120.4
79.8
94.9
A
A
B
C
D
E
F
±10
±2.5
5
61.0
99.0
45.3
76.4
48.7
41.0
35.0
±15
±5
10
80.0
118.0
49.2
89.5
56.2
41.0
35.0
±25
50
140.5
178.5
71.8
143.9
102.8
117.9
100
197.5
235.5
107.2
207.6
160.8
175.9
150
248.5
286.5
152.4
278.6
231.8
246.9
95.3
60.7
41.0
35.0
±50
95.0
146.5
106.2
82.0
76.0
±75
154.0
102.9
161.3
121.2
82.0
76.0
176.0
113.2
182.8
140.2
82.0
76.0
±7.5
15
87.5
±10
20
102.0
140.0
±15
30
116.0
±25
50
138.0
125.5
51.0 19933
540002-694
ISS 2 EDCR
Optimum series dimensions (mm)
MI Cable / Free Core
Ø2.60
Free core
M6 x 1.0-6g
Core carrier
Ø2.60
17.00
18-20
Ø8.50
Ø 19.00
18.80
Ø6.35
(M4 x 0.7-6H)
'C' ±0.5
M4 BOTH ENDS (*)
5.00
B
18-20
C
5.00
2.95
18-20
8.00
2.95
10-15
8.00
2.95
A
300
A
B
16.00
18.00
17.50 REF
A
A
B
C
D
5
55.6
93.4
37.8
16.75
63.4
±5
10
74.5
112.5
45.7
29.00
80.5
±7.5
15
82.0
120.0
47.0
31.50
85.8
±10
20
96.5
134.5
54.5
39.00
100.5
±15
30
110.5
148.5
64.9
37.50
117.8
±25
50
132.5
170.5
77.2
38.50
141.3
±50
100
189.5
225.2
112.6
50.00
205.0
±75
150
240.5
278.5
157.8
50.00
276.0
±2.5
692
Ø2.00
Ø9.00
All
Ø2.00
DC &
4-20mA
Ø9.00
LVDT
Type
A
B at null
OP1.5
20.60
14.10
OP6.0
46.50
21.00
OP12.5
83.50
31.70
9.512
9.450
Ø
9.512
9.450
Ø15.60
4.80
Universal joints
DC &
4-20mA
16.35
Ø
B
A = Body length
C = Core Length
LVDT
9.05
50.80
Ø2.75
10-15
300
MI Cable Free Core
28.40
83.50
5.00
2.95
Range (mm)
46.50
OP12.5
Ø2.75Ø 9.512
9.450
(BOTH ENDS)(BOTH ENDS)
22.50
OP6.0
C
Guided core
4.80
9.512
9.450
M2 x 0.4-6hM2 x 0.4-6h
20.00
Ø
Ø2.60
12.00 BOTH ENDS (*)
C at null
11.00
Ø3.15
A
B
5.00
Ø2.60
'A' ±0.5
Core
FREE CORE
A
CARRIER
(BOTH ENDS)(BOTH ENDS)
300
M2 x 0.4-6hM2 x 0.4-6h
'B'@ NULL ±0.5
17.00
B
20.60
10-15
300
1M OF PU CABLE
A
OP1.5
Ø3.15
18-20
'D' ±0.5
M10 x 1.0-6g
10-15
Type
16.00
18.00
17.50 REF
Ø15.60
4.80
10.00 REF
10.00 REF
33.00
33.00
7.30
25.00
7.60
19.50
17.00
17.00
14.50
5.25
5.25
7.60
8.50
8.50
5.25
5.25
Ø1.00
Ø1.00
M2 x 0.4-6g
M2 x 0.4-6g
3.50
3.50
17.30
17.30
150.00 FULLY EXTENDED
4.50
4.50
17.00
17.00
Ø1.90
Ø1.90
Ø3.50
Ø3.00
Ø3.00
25.00
47.00 FULLY RETRACTED
39.00
65.00
65.00
FULLY
FULLY
RETRACTED
RETRACTED
91.00
91.00
FULLY
FULLY
EXTENDED
EXTENDED
Ø3.50
Ø3.50 47.00 FULLY RETRACTED
Ø3.50
25.00
7.30
17.30
17.30 20.50
20.50
3.50
3.50
7.60
8.50
8.50
7.60
3.50
17.30
Ø3.50
20.50
39.00
19.50
14.50
14.50
4.50
17.0
91.00 FULLY EXT
39.00
19.50
33.00
Ø3.50
20.50
65.00 FULLY RETR
17.
3.50
17.30
Ø2.95
Ø2.95
E
E
E
Ø1.06
Ø1.06
Ø1.06
C
C
C
213.50
213.50
89.50
89.50
7.30
Ø3.00
Ø3.00
Ø3.50
Ø3.50
Ø3.50
Ø3.50
17.00
17.00
5.25
5.25
8.50
8.50
Ø3.50
Ø3.50
Ø3.50
33.00
33.00
17.00
17.00
Ø3.50
14.50
4.50
4.50
3.50
17.30
Ø3.50
19.00
Ø19.00
Ø18.90
18.90
Ø2.50
3.50
3.50
Ø3.50
Ø3.50
75.00
75.00
FULLY
FULLY
EXTENDED
EXTENDED
20.50
20.50
5.25
5.25
156.40
66.00
27.00
Ø3.00
66.00
27.00
27.00
LE/25/S and LE/25/P
LE/12/S and LE/12/P
49.00
49.00
FULLY
FULLY
RETRACTED
RETRACTED
3.50
3.50
Ø2.50
Ø1.00
M2 x 0.4-6g
Ø3.50
Ø3.50
8.50
8.50
Ø8h6
49.50
49.50
FULLY
FULLY
EXTENDED
EXTENDED
66.00
66.00
58.00
58.00
FULLY
FULLY
EXTENDED
EXTENDED
19.50
45.00
45.00
FULLY
FULLY
RETRACTED
RETRACTED
Ø3.50
18.40
54.00
65.00Ø3.00
FULLY RETRACTED
33.00
21.20
39.40
3.50
49.00
10.00
17.30
Ø8h6
Ø3.00
Ø3.50
15.00
156.40
89.50
15.70
89.50
41.00
17.00
17.00
5.25
8.50
Ø8h6
5.25
8.50
17.00
8.85
Ø3.00
11.00
33.00
20.50
5.25
8.50
28.00
33.00
3.50
5.25
8.50
2.50
Ø8h6
2.50
MD1 / MD1H
27.00
39.40
39.40
10.00
10.00
Ø20g6
Ø20g6
Ø8h6
Ø8h6
2.50
2.50
Ø20g6
Ø20g6
Ø8h6
Ø8h6
Air inlet nozzle for
pneumatic (P) versions
30.00
39.40
39.40
6.00
6.00
54.00
Ø6h6
3.50
Ø3.50
17.00
24.40
68.00
Ø8h6
21.20
30.00
20.50
3.00
6.00
D at null
10.30
16.40
Ø1.90
29.00
15.70
49.00
89.50
3.50
Ø3.50
Ø1.90
54.00
C
11.00
8.40
Ø1.90
41.00
MD5 / MD5H
IP60 versions
39.40
39.40
Ø1.90
Ø2.20
Ø8h6
Ø8h6
Ø2.20
6.90
30.00
17.20
Ø2.20
15.00
18.40
MD2.5 / MD2.5H
3.50
Ø3.50
66.00
Ø2.20
Ø3.50
Ø8h6
11.00
30.00
30.00
17.20
17.20
30.00
30.00
LE/25/S
LE/12/S
66.00
8.85
28.00
MD10 / MD10H
Ø8h6
2.50
2.00
6.00
B
28.00
MD5 / MD5H
Ø1.60
MD1 / MD1H
17.20
2.50
36.50
36.50
FULLY
FULLY
RETRACTED
RETRACTED
C
39.40
39.40
39.40
39.40
Ø8h6
2.50
Lift for spring (S) versions
A
M6D1 / M6DH1
MD2.5 / MD2.5H
Ø1.95
Ø8h6
39.40
4.50
10.00
Ø8h6
45.00 FU
58.00 F
2.50
15.30
Ø8h6
Ø8h6
Type
Ø6h6
11.00
Ø8h6
CC
42.60
30.00
30.00
10.00
10.00
20.60
17.20
17.20
BB
34.90/35.05
10.00
10.00
DD
SM3
2.50
2.50
Ø3.00
Ø3.00
AA
10.30
Ø8h6
39.40A
17.20
30.00
17.20
D
28.00
FF F
12.70
Ø8h6
Ø8h6
89.50
M2 x 4 (BOTH ENDS)
89.50
89.50
Ø3.50
2.50
2.50
DF series dimensions (mm)
C
M6D1 / M6DH1
BB B
D at null
24.90
E39.40 F at null
B H/B
Type
2.50
Ø8h6
2.50
B LVDT
DD D
AA A
C
9.90
17.20
17.20
MD dimensions (mm)
B
15.10/15.25
2.50
2.50
B
66.00
66.00
D
A
SM1
IP50 versions
Type
54.00
17.20
17.20
* *
* *
* *
B
THREADED
CORE
ALTERNATIVE
9.51
Ø
9.45
A
LE Linear Encoders dimensions (mm)
SM series dimensions (mm)
Dimensions
Dimensions
(mm):
(mm):
Orbit
Orbit
interface
interface
components
components
Signal conditioning modules dimensions (mm)
Orbit® interface components dimensions (mm)
PIEPIE
(Probe
(Probe
Interface
Interface
Electronics)
Electronics)
74.00
OD series
OD4
72.00
9XXXXX-X
XXXA123YZZ
DP/XX/X
DP/XX/X
9XXXXX-X
XXXA123YZZ
112.00
120.00
OD5
39.00
39.00
56.00
17.70
OD2
56.50
77.50
56.50
72.00
77.50
50.00
112.00
65.00
17.70
65.00
80.00
120.00
108.00
120.00
49.00
1.75m
Ø3.20 x 8.00 deep holes in 4 positions
Ø4.00 mounting holes in 4 positions
23.00
ATM TTL converter
6.25
6.25
8.25
8.25
61.0061.00
138.00
138.00
31.00
31.00
124.00
124.00
4.004.00
16.4016.40
65.0065.00
111.00
22.50
8.00
34.35
8.00
34.35
46.00
46.00
Ø3.50
71.5071.50
Transducer
Ø 20.55
47.8047.80
19.9019.90
23.2023.20
2 OFF2 M4
OFFMOUNTING
M4 MOUNTING
POSITIONS
POSITIONS
IP67
BICM
30.60
30.60
VIEW VIEW
SHOWING
SHOWING
3 ASSEMBLIES
3 ASSEMBLIES
PLUGGED
PLUGGED
TOGETHER
TOGETHER
12.60
114.50
Output
T-CON
withwith
32 mm
DINDIN
raiseraise
connector
T-CON
32 mm
connector
73.00 MAX
Standard
BICM
Transducer
up to 90m
95.80
99.00
12.60
MOUNTING
MOUNTING
30 30
19.00
Gain offset
19.00
Ø3.50
BICM
19.0019.00
MOUNTING
MOUNTING
OUTPUT
95.80
23.2023.20
23.9023.90
19.0019.00
TRANSDUCER
19.9019.90
19.00
Ø 20.65
73.0 MAX.
Ø
-15V (nominal)
up to 300m
IP67
20.65
20.55
34.35
34.35
10.50
DRC DIN rail module
+15V (nominal)
Common (0V)
10V output
BICM
10.50
Transducer
6.00
6.00
7.00
7.00
6.25
6.25
8.50
8.50
LEDs
LEDs
Electrical connections
46.00
35.0035.00
35.0035.00
30.00
30.00
16.4016.40
46.00
60.25
60.25
65.0065.00
BICM in line module
IP40
66.0066.00
66.0066.00
19.00
Ø4.00
Ø4.00
Ø3.50
Ø3.50
T-CON
T-CON
Orbit
Orbit
network
network
connector
connector
VIEW VIEW
SHOWING
SHOWING
3 ASSEMBLIES
3 ASSEMBLIES
PLUGGED
PLUGGED
TOGETHER
TOGETHER
T-CON
withwith
mounting
feetfeet
option
T-CON
mounting
option
Dimensions
Dimensions (mm):
(mm): Specialist
Specialist gauge
gauge probes
probes
Other Solartron sensor solutions
Orbit® interface components dimensions (mm)
PSIM (Power Supply Interface Module)
PSIM (Power Supply Interface Module)
66.00
66.00
65.00
65.00
XXXA123YZZ
XXXA123YZZ
10.50
10.50
99.00
99.00
19.00 MOUNTING
19.00 MOUNTING
19.00
19.00
MOUNTING
MOUNTING
57.00
57.00
39.50
39.50
29.00
29.00
17.70
17.70
6.00 TYP
36.00
36.00
38.90
38.90
6.00 TYP
4 POSITIONS
4 POSITIONS
3D VIEW OF MOUNTING BRACKET
3D VIEW OF MOUNTING BRACKET
uMeasurement ranges from 0.5mm to 100mm
uAccuracy to 0.1% of reading (inductive) or 0.4μm for encoders
uResolution down to 0.01μm or better
uProbe diameters from 6mm
uLVDT or Half Bridge
uSpring push, Pneumatic push or Vacuum retract
uPrecision linear bearings
S955
u25.4 mm to 7620 mm measuring range
u<0.01% linearity
uVibration resistant up to 30G
66.00
uShock Resistant up to 1000G 66.00
65.00
uTricolour diagnostic LED
65.00
uAll standard current and voltage outputs
uRS, VP, CP and TP Digital outputs
uIP 68
uProtective housings for harsh environments
The S953 VMAX Linear Displacement Transducer is
the ideal solution for automation solutions requiring
accurate feedback of continuous position. It is especially
recommended in environments where vibrations, extreme
temperature and contaminants are present. The S953 is
an ideal solution when velocity and position need to be
incorporated into the automation control system process.
10.50
10.50
4.50
4.50
TYP
TYP
128.00
128.00
S953
4 POSITIONS
4 POSITIONS
152.00
152.00
Our extensive range includes Inductive and Optical
Encoder Probes and probes with integrated electronics.
GEMCO Series Magnetostrictive Displacement Sensors
VIEW SHOWING 3 ASSEMBLIES PLUGGED TOGETHER
VIEW SHOWING 3 ASSEMBLIES PLUGGED TOGETHER
PSIM transformer
PSIM transformer
Our Specialist Gauges make precision measurements of
miniature parts,bores and cavities a simple and reliable
process.
99.00
99.00
23.20
23.20
Specialist Gauging Sensors
uMeasurement ranges from 0.5mm to 10mm
uResolution down to 0.01μm
uRepeatability: <0.25μm
uIP65 protection
uLVDT and half bridge
uPneumatic or spring actuation
uRange of changeable tips
71.50
71.50
19.90
19.90
Gauging Sensors
105.00
105.00
105.00
105.00
DP/XX/X
DP/XX/X
9XXXXX-X
9XXXXX-X
17.70
17.70
u
100 mm to 4572 mm measuring range
2.00m OF Ø3.50mm CABLE
u
<0.05%
linearity
2.00m
OF Ø3.50mm
TO METAL
SHELLEDCABLE
9W
TO
METAL
SHELLED
9W
D-TYPE
SOCKET
CONNECTOR
u
Non-contact
applications
D-TYPE SOCKET CONNECTOR
u
Analogue voltage and current outputs
u
Analogue zero and span adjustable
u
Digital RS, VP and CP outputs
u
Quadrature outputs
u
Tricolour diagnostic LED
u
IP 67 (IP 68 optional)
Designed for OEMs as an alternative to limit switches,
proximity sensors or linear potentiometers, the S955 Brik
Linear Displacement Transducer is an economical solution
for monitoring continuous position. The sensing element
and electronics are housed in a streamlined anodized
aluminium extrusion. Position is determined by a magnet,
linearly guided over the sensing element.
Sales offices
Agents and distributors
UK
Argentina
ARO S.A.
Argentina
Tel:
+54 (0)11 4331 5766 / 4503
ARO+54
S.A. (0)11 4331 3572
Fax:
Tel: +54 (0)11 4331 5766 / 4503
Email: [email protected]
Fax: +54 (0)11 4331 3572
Web: www.aroline.com.ar
Australia
& New Zealand
Web: www.aroline.com.ar
QC
Systems
Pty Ltd
Australia
& New
Zealand
Tel:
398528222
QC +61
Systems
Pty Ltd
Fax:
+61
398528100
Tel: +61 (0)3 8488 8222
Email:
[email protected]
Fax: +61
(0)3 8488 8100
Web:
Email:www.qcsystems.com.au
[email protected]
Web: www.qcsystems.com.au
Austria
Sales offices
Solartron
Metrology
UK
Steyning
Bognor Regis
Solartron Way,
Metrology
West
Sussex,
9ST
Steyning
Way, PO22
Bognor
Regis
West Sussex, PO22 9ST
Sales
Sales
Tel:
+44 (0)1243 833333
Tel: +44
Fax:
+44(0)1243
(0)1243833333
833332
Fax: +44 (0)1243 833332
Reception
Reception
Tel:
+44 (0)1243
(0)1243 833300
833300
Tel: +44
Fax: +44 (0)1243 861244
861244
France
France
AMETEK SAS
Solartron
Metrology
Solartron
Metrology
Division
Rond
point
de l’épine
des champs
Rond point
deDl’épine des champs
Buroplus
Bat
Buroplus Bat D
Elancourt, 78990 France
Elancourt, 78990 France
Tel:
+33 (0)1
(0)1 30
30 68
68 89
89 50
50
Tel: +33
Fax:
+33 (0)1
(0)1 30
30 68
68 89
89 99
59
Fax: +33
[email protected]
Germany
Germany
AMETEK GmbH
AMETEK
GmbH
Solartron Metrology
Solartron
Metrology Division
Division
Rudolf-Diesel-Strasse 16
Rudolf-Diesel-Strasse
16
40670 Meerbusch
40670 Meerbusch
Tel: +49 (0) 2159 9136 500
Tel:
Fax:+49
+49(0)
(0)2159
21599136
9136500
505
Fax:
+49
(0) 2159 9136 505
Email:
[email protected]
Email:
China [email protected]
Ametek Commercial Enterprise (Shanghai) Co., Ltd
China
No.155 Puhui
Road Enterprise (Shanghai) Co., Ltd
Ametek
Commercial
Jui Ting
Economic
No.1
Ametek
RoadDevelopment Zone
Shanghai, 201615, China
Jiu Ting Economic Development Zone
Tel: +86 21 5763 2509
Shanghai,
201615
Fax: +86 21
5866 0969 Ext. 261/262
Tel:
+86
21
5763 2509
Fax: +86 21 5866 0969 Ext. 261/262
USA
Email:
[email protected]
Solartron
Metrology
USA Central Sales Office
USA
915 N. New
Hope Road, Suite C
Solartron
Metrology
Gastonia,
NCSales
28054
USA
Central
Office
Tel: +1 800 873 5838
915 N.New Hope Road, Suite C
Gastonia, NC 28054
USA East
Tel: +1 800 873 5838
AL, CT, DE, DC, FL, GA, KY, ME, MD, MA, MS,
Email:
NH, NY,[email protected]
NC, PA, RI, SC, TN, VT, VA, WV
USA
East
Tel: +1
704 488 0384
Email:
AL,
CT,[email protected]
DE, DC, FL, GA, KY, ME, MD, MA, MS,
USA NJ,
Industrial
Belt
NH,
NY, NC,
PA, RI, SC, TN, VT, VA, WV
MI, Ohio
(North
170)
Tel:
+1 704
868of
4661
Tel: [email protected]
810 877 2394
Email:
USA Industrial Belt
USA Midwest/Northwest
MI,
Ohio
I70)MO, MT, NE, ND, OR, SD,
ID, IL,
IN,(North
IA, KS,ofMN,
Tel:
734 671
7830
Ohio+1
(South
of I70),
WA, WI, WY
Email:
Tel: [email protected]
248 390 0632
Email:
[email protected]
USA
Midwest/Northwest
USAIL,Southwest
ID,
IN, IA, KS, MN, MO, MT, NE, ND, OR, SD,
AZ, AR,
CA, CO,
LA,WA,
NV, NM,
OK, TX, UT, Mexico
Ohio
(South
of I70),
WI, WY
Tel: +1
Tel:
+1 281
847 216
458 3043
7667
Email:
[email protected]
USA Technical Support
USA
Southwest
Tel: +1 800 772 2702
AZ,
AR,[email protected]
CA, CO, LA, NV, NM, OK, TX, UT, Mexico
Email:
Tel: +1 281 531 5023
India
Email:
[email protected]
AMETEK
Instruments India Private Limited
USA
Technical
Support
1st Floor, Left Wing
Prestige
Featherlite
Tech Park
Tel:
+1 800
772 2702
Plot #148,
EPIP II Phase
Email:
[email protected]
Whitefield, Bengaluru 560066
Karnataka, India
Tel: +91 80 6782 3200
Fax: +91 80 6782 3232
SMREF: 502920
Agents and distributors
Israel
Austria Electronic Handel GmbH
Elsinger
Elsinger
Handel GmbH
Tel:
+43 Electronic
1 979 46 510
Tel: +43
10
Fax:
+4311979
979465
40 77
Fax: +43
1 979 4077
Email:
[email protected]
Email:www.elsinger.at
[email protected]
Web:
Web: www.elsinger.at
Benelux
Benelux
Dimed NV
Dimed NV
Tel: +32 3 236 64 65
Tel: +32 3 236 64 65
Fax:
+32 33 236
236 64
64 62
62
Fax: +32
Email:
[email protected]
Web:
www.dimed.be
Web: www.dimed.be
Brazil
Brazil
MG-EXIM Técnica Ltda
Tel: +55 (11)4337 1257
1257
Fax: +55 (11)4122 3458
3458
[email protected]
Web: www.mg-exim.com.br
www.mg-exim.com.br
Canada
Canada
Hoskin Scientific
Hoskin
Scientific Ltd
Ltd
Burlington
Burlington
Tel: +1
Tel:
+1 905
905 333
333 5510
5510
Fax: +1
Fax:
+1 905
905 333
333 4976
4976
Montreal
Montreal
Tel: +1 514 735 5267
Tel: +1 514 735 5267
Fax: +1 514 735 3454
Fax:
+1
514 735 3454
Email:
[email protected]
Vancouver
Vancouver
Tel: +1 604 872 7894
Tel:
Fax:+1
+1604
604872
8727894
0281
Fax:
+1
604 872 0281
Email:
[email protected]
Email:
[email protected]
Web: www.hoskin.ca
Web:
Czechwww.hoskin.ca
Republic
K-Pro soft,
spol. s.r.o.
Czech
Republic
Tel: +420
820
580
K-Pro
soft,417
spol.
s.r.o.
Fax:+420
+420417
417820
532580
515
Tel:
Email:
[email protected]
Fax:
+420
417 532 515
Web: www.kprosoft.cz
Email:
[email protected]
Finland
Web:
www.kprosoft.cz
Aseko Oy Electronics Division
Finland
Tel: +358 10 400 1012
Aseko Oy Electronics Division
Fax: +358 10 400 1200
Tel:
+358
10 400 1012
Email:
[email protected]
Fax:
10 400 1200
Web:+358
www.aseko.fi
Hungary
Web: www.aseko.fi
Adroni Bt.
Hungary
Tel: +36 1 214 64 28
Adroni
Bt.30 438 08 43
Fax: +36
Tel:
+36
1 214 6428
Email:
[email protected]
Web:+36
www.adroni.eu
Fax:
1 214 6428
Globus Technical Equipment Ltd
Israel
Tel:
+972 9 9560444
Globus
Technical
Equipment Ltd
Fax:
+972
9 9560202
Tel: +972 9 9560444
Fax: +972 9 9560202
Italy
Tecnosens
S.R.L.
Web: www.globus.co.il
Tel:
+39 030 3534144 / 3547435
Italy
Fax:
+39 030
3530815
Tecnosens
S.P
.A.
Email:
[email protected]
Tel: +39
030 3534144
Web:
www.tecnosens.it
Fax: +39 030 3530815
Japan
Web: www.tecnosens.it
Michell
Japan K.K.
Japan
Musashino
Centre Bld
YashimaNakacho,
Import & Export
Co. Ltd
1-19-18,
Musashino
Tel: +81
(0)3 3588 6463
Tokyo
180-0006
Fax:
+81
(0)3
Tel:
+81
422
503588
26006471
Email:
[email protected]
Fax:
+81
422 52 1700
Web: [email protected]
www. ybk.co.jp
Email:
Korea
Korea
Hanse Precision Ltd
Hanse Precision Ltd
Tel: +82 31 477 6400
Tel:
+82 31
Fax:+82
31477
4776400
6404
Fax:+82
31 477 6404
Email:
[email protected]
Web: www.hsps.co.kr
Web: www.amsys.co.kr
Malaysia
Malaysia
SciGate Automation (m) Sdn Bhd
SciGate
Tel: +03Automation
7804 7522 (m) Sdn Bhd
Tel:
+07
351
9806
Fax:
+03
7804
7422
Email:
[email protected]
Fax:
+07
351 9807
Web: www.
scigate.com.sg
Email:
[email protected]
Norway
Norway
SemitronicAS
AS
Semitronic
Tel:+47
+4721
2137
3787
8720
20
Tel:
Fax:+47
+4722
2291
9175
7501
01
Fax:
Email:[email protected]
[email protected]
Email:
Web: www.semitronic.no
Web: www.semitronic.no
Poland
Poland
Contact German office
Contact German office
Portugal
Portugal
Maio, Carmo & Martins, Lda.
Maio,
Carmo
Martins,
Tel: +351
227& 538
604 Lda.
Tel:
+351
227
538
Fax:
+351
227
538604/5
606
Fax:
+351
227 538 606
Email:
[email protected]
Email:
[email protected]
Web: www.mcm-electronics.com
Web:
www.mcm-electronics.com
Russia
OOO UNIPROM Ltd
Russia
Tel: +7 9312
UNIPROM
Ltd739792
Fax:+7
+79312
8312739792
739801
Tel:
Email:
Fax:
[email protected]
8312 739801
Web: www.uni-prom.ru
Email:
[email protected]
Singapore
Web:
www.uni-prom.ru
SciGate Automation (s) Pte Ltd
Singapore
Tel: +65 6561 0488
SciGate
Automation
Fax: +65
6562 0588(s) Pte Ltd
Tel:
[email protected]
6561 0488
Email:
Fax:
+65
6562 0588
Web:
www.scigate.com.sg
Web: www.scigate.com.sg
South Africa
Reef Diamond Techniques
South
Africa
Tel: +27
11 493 0991
Reef
Techniques
Fax:Diamond
+27 11 493
9044
Tel: +27 11 493 0991
Fax: +27 11 493 9044
[email protected]
Email:
Medel
Cadena SA
Web:
www.reefdiamond.co.za
Tel: +34 932 966 294
Spain
Fax: +34
934 315
Medel
Cadena
SA 697
Email:
Tel:
[email protected]
932 966 294
Web:
www.medelcadena.com
Fax:
+34
934 315 697
Email:
[email protected]
Sweden
Web:
www.medelcadena.com
Amtele
AB
Sweden
Tel: +46 8 5564 6600
Amtele
AB 8 5564 6610
Fax: +46
Tel:
[email protected]
(0)8 5564 6600
Email:
Fax:
+46
(0)8 5564 6610
Web:
www.amtele.se
Switzerland
Web:
www.amtele.se
QSS Quality Systems Solutions GmbH
Switzerland
Tel: +41 44 2420000
QSS Quality Systems Solutions GmbH
Fax: +41 44 2420 010
Tel: +41 44 2420 000
Fax: +41 44 2420 010
www.qss-solutions.ch
Email:
Web:
www.qss-solutions.ch
Taiwan
Zimmerman Scientific Co., Ltd
Taiwan
Tel: +886 2 Scientific
2752 7075
Zimmerman
Co., Ltd
Fax:
+886
2 2771
9415
Tel:
+886
2 2752
7075
Email:
[email protected]
Fax:
+886
2 2771 9415
Email:
[email protected]
Website:
www.zimmerman.com.tw
Website: www.zimmerman.com.tw
Thailand
Thailand
Katanya Supply Co. Ltd
Katanya
Co.3718
Ltd
Tel: +66Supply
(02) 334
Tel:
+66
(02)
334
3718
Fax:
+66
(02)
334
3719
Fax:
+66
(02) 334 3719
Email:
[email protected]
Email:
www.katanyagroup.com
Web: www.katanyagroup.com
Tunisia
Tunisia
Contact French office
Contact French office
Turkey
Turkey
BilginogluEndustri
EndustriMalzemeleri
Malzemeleri
Bilginoglu
Sanayive
TicaretA.S.
A.S.
Sanayi
ve Ticaret
Headquarters
Headquarters
Tel:+90
+ 90232
232433
433
(pbx)
Tel:
7272
3030
(pbx)
Fax: :+90
+ 90232
232457
457
Fax
3737
6969
IstanbulOffice
Officeand
andShowroom
Showroom
Istanbul
Tel:+90
+ 90212
212612
612
Tel:
5555
4545 (pbx)
Fax
6565
8585
Fax: :+90
+ 90212
212612
612
Email:
[email protected]
Office and Showroom
Web:
Tel: +www.bilginoglu-endustri.com.tr
90 224 443 43 80 (pbx)
Fax : + 90 224 443 43 84
Vietnam
Vecomtech
Tel:
+84
4 754 9061
Web:
www.bilginoglu-endustri.com.tr
Fax: +84 4 754 9063
Vietnam
Vecomtech
Web: www. vecomtech.com
Tel: +84 4 754 9061
Fax: +84 4 754 9063
India
Electronica Mechatronic Systems
(India) Private Limited
Tel: +91 (0)20 2422 4440
Fax: +91 (0)20 2422 1881
Web: electronicagroup.com
Iran
Behineh Sanj Co, Inc.
Tel: +98 311 3873998 / 3873999
Fax: +98 311 3873997
Mob: +98 9131153199 / 9131173104
Web: www.behsanj.com
Solartron Metrology
pursues a policy of
continuous development.
Specifications in this
document may therefore
be changed without notice.
Q 09540
OC2010/01/E
DC2012/01/E
Displacement sensors
including

Displacement sensors - Solartron Metrology

Transcription

Similar documents

Orbit3 - Solartron Metrology

OUR LOCATIONS - Kharafi National

7614f grain-vac - Krueger Grain Vacs

1445 with LEDs Watertight multipurpose luminaire

Welcome to - Serviced Office

Administrative Headquarters of Soto Zen Buddhism Head Temples

KeScan Nuctech XT2100 Data Sheet

Hotel Reservation Form

Download-Brochure

sawatdee - Town Planner

nuctech™ cx6550bi