Product Guide - Globalimageserver.com

Transcription

Product Guide
Effective October 2015
Gas and Electric Tank, Tankless Gas
and Electric, and Solar Water Heating Solutions
for America’s homes!
richmondwaterheaters.com
National Customer Service
Division Office.............................. 334-260-1500
Customer Service........................ 800-621-5622
Warranty, Parts............................ 800-219-6107
Fax................................................ 800-535-9538
Email................ [email protected]
Technical Service.........................800-HEATER3
(800-432-8373)
EcoNet Support........................... 800-255-2388
Website.................richmondwaterheaters.com
In keeping with its policy of continuous progress and product improvement,
Richmond reserves the right to make changes without notice.
Richmond Water Heaters • 101 Bell Road • Montgomery, AL 36117 • 1-800-621-5622
© Rheem Manufacturing Company
•
Printed in U.S.A.
• 10/15 WP
•
FORM NO. T-147F Rev. 35
richmondwaterheaters.com
Richmond Water Heaters
■ Miscellaneous
• FVIR System.........................................4
• EverKleen System................................5
• Lifeguard Electric Element....................6
• Lifeguard Electric Element....................6
• EcoNet..................................................6
■ Gas Tank-Type
Encore Models
• Encore High Efficiency
Condensing Power Direct Vent......... 8-9
•E
ncore XR90 Induced Draft.......... 10-11
• Encore Powered Damper............. 12-13
• Encore Atmospheric..................... 14-15
Essential Plus Models
• Essential Plus
Powered Damper.......................... 16-17
• Essential Plus Atmospheric.......... 18-19
• Essential Plus Heavy Duty ........... 20-21
• Essential Plus Heavy Duty
Power Direct Vent......................... 22-23
• Essential Plus Heavy Duty
Power Vent .................................. 24-25
Essential Plus Models
• Essential Plus Mid-Efficiency
Tankless........................................ 56-57
■ Electric Tank-Type
Encore Models
•E
ncore Hybrid Heat Pump............ 58-59
• Encore.......................................... 60-61
Essential Plus Model
• Essential Plus............................... 62-63
Essential Models
• Essential....................................... 64-65
• Essential Point-of-Use.................. 66-67
• Essential for Mfg. Housing........... 68-69
• Essential Table Top....................... 70-71
■ Solar
• SolPak Active System with
Electric Backup............................ 74-75
• Solaraide HE Tanks....................... 76-77
■ Marathon Models
• Marathon...................................... 78-79
• Marathon Heavy Duty................... 80-81
■ Thermal Expansion Tanks...............82
■ Tankless Electric
Essential Model
• Essential Tankless......................... 72-73
Table of Contents
■ ENERGY STAR ..................................7
®
Essential Models
•E
ssential Powered Damper.......... 26-27
• Essential Atmospheric.................. 28-29
• Essential Power Vent.................... 30-31
• Essential Power Direct Vent.......... 32-37
•E
ssential Direct Vent..................... 38-39
•E
ssential Atmospheric for
Mfg. Housing................................ 40-41
•E
ssential Direct Vent for
Mfg. Housing................................ 42-43
•E
ssential Direct Vent Co-Axial
for Mfg. Housing........................... 44-45
Ultra Low NOx Models
•P
owered Damper
Ultra Low NOx.............................. 46-47
•A
tmospheric Ultra Low NOx......... 48-49
•H
eavy Duty Ultra Low NOx........... 50-51
•P
ower Vent Ultra Low NOx........... 52-53
■ Tankless Gas
Encore Models
•E
ncore High Efficiency
Condensing Tankless.................... 54-55
2
Exceptional Performance and Value from The Water Heater Experts
Richmond Water Heaters are manufacturedby Rheem®, the company
that invented water heaters. We put the best materials and
workmanship into our Richmond brand to produce water heaters that
offer exceptional values.
Now, we provide you better value than ever, with our a
ll-new
Richmond water heater product line. Our comprehensive line has
been designed to meet all consumer needs, and re-engineered to
keep pace with consumer demands for more efficient, fast-recovery
water heaters.
Our electric, natural gas, and liquidpropane (LP) m
odels are available
in several warranties options — ranging from 6-year to 12-year, and
even lifetime for our Marathon™ models. And to meet your s pecialty
applications, we offer the Power Direct Vent, Direct Vent, Power Vent,
Mobile Home, Tankless and Point-Of-Use models, as well as our new
Heat Pump and Solar models.
And when you look at the value, quality, and features of Richmond
Water Heaters, no other brand comes close. Here are just a few of
the features that make Richmond Water Heaters the best product for
you and your family.
3
The Major Features of Richmond Flammable Vapor Ignition Resistant (FVIR) Product Designs
Flammable Vapor Ignition Resistance
We offer the best-in-class FVIR System that’s
engineered to exceed ANSI standards.
Flame Arrestor Plate
A specially-designed flame arrestor prevents ignition
of vapors outside the combustion chamber.
Superior Air Filtration
It prevents the flame arrestor from becoming
clogged by lint, dust and oil.
Standard Replacement Parts
We use standard gas valves and thermocouples –
easy to replace.
It’s Easy to Light
No matches are required with the Richmond FVIR System.
Plus…
• FVIR System models are high altitude compliant – some
models certified for applications up to 6,000 and 10,200
feet above sea level.
• Zero clearance to combustibles, rear and side.
• Energy efficient! Get more hot water at a lower
operating cost!
• Available on most Richmond gas water heater models.
Miscellaneous
Exclusive, Air Shut-Off System
It shuts off gas and air supplies – providing
double protection.
Maintenance-Free! No Filters to Clean!
Our products have no filters to service, replace or clean.
4
EverKleen™ System
EverKleen™ self-cleaning water
heating system fights harmful
sediment build-up with a high
velocity spiraling water stream
islodge this
The EverKleen™ system helps to d
s ediment by channeling water through a specially
developed inlet tube. This tube c
reates a high-
velocity spiralling water stream which strikes the
bottom of the water heater tank with sediment
busting force.
Miscellaneous
Sediment build-up in a water heater creates
layers of non-conducting m
aterial between
the water and the energy that heats the water.
This causes a reduction of heat transfer which
increases tank bottom temperatures and
decreases water temperatures. When this occurs,
the results are decreased water heater efficiency
and decreased tank life.
The spiraling effect
also creates better
mixing throughout
the water heater tank
which reduces the
effects of stacking.
Stacking occurs
when frequent small
draws of water c
reate
different temperatures
throughout the tank
resulting in increased
peak temperatures at
the top of the tank. The
EverKleen™ system
greatly reduces peak
temperatures, thus
increases first hour
deliverability.
Advantages
Water Heating System
• Fights sediment build-up
• Helps preserve operating e
fficiency
• Helps improve tank life
•P
rovides increased d
eliverability
5
EcoNet™
Lifeguard™ Electric Element
Introducing EcoNet™, the smart
home system for heating, cooling
and water heating developed
exclusively by Rheem.
Low watt density design delivers full watt-rated heating power to a larger
surface area, eliminating high heat concentrations and prolonging element life.*
*See Residential Warranty Certificate for complete information.
High density nichrome wire electric
heating filament; best grade A,
80/20 nichrome wire made…for top
performance and long-life operation.
The EcoNet™ WiFi Kits provide remote access to EcoNet™ Enabled Electric and Gas
Water Heaters from mobile apps and a mobile friendly web portal.
Contractor Benefits:
EcoNet™ makes it easier than ever for homeowners to save energy
and achieve that perfect temperature – all while giving you the
diagnostics you need to deliver that perfect level of service.
• Equipment Detection – EcoNet™ automatically detects all
connected equipment
•E
quipment Alerts – Help homeowners identify what part of
equipment requires attention before making service call
INCOLOY® 840 stainless steel
sheath, resists water chemical
corrosion and burn-out even in
air or sediment for long element
life, long life performance.
Miscellaneous
High-grade magnesium oxide
packing moves the heat quickly to
the element’s surface, protecting
the nichrome wire filament and
boosting efficiency.
•C
ontact Info – Contractor contact details stored in the
EcoNet™ app are automatically displayed when equipment
alerts occur
Steel screw-in
head provides
solid
construction
and ease of
maintenance.
WiFi broadband internet connection required, WiFi Kit sold separately
6
ENERGY STAR® Qualified Water Heaters
What is ENERGY STAR®?
Energy efficient choices can save families
about a third on their energy bill with s imilar
savings of greenhouse gas e
missions,
without sacrificing features, style or
comfort. ENERGY STAR® helps you
make the energy efficient choice.
Tankless
Models
Gas
Direct Vents
H RMTGH-84DVLN
H RMTGH-84DVLP
H RMTGH-95DVLN
H RMTGH-95DVLP
Outdoor
H RMTGH-84XLN
H RMTGH-84XLP
H RMTGH-95XLN
H RMTGH-95XLP
Tank Models
Gas
Induced Draft
H 12G30-60
H 6G30-60
Short Powered Damper
H 12G40S-40E2
H 12G40S-36PE2
H 12G50S-40E2
H 12G50S-36PE2
H 9G40S-40E2
H 9G40S-36PE2
H 9G50S-40E2
H 9G50S-36PE2
H 6G40S-40E2
H 6G40S-40PE2
H 6G50S-40E2
H 6G50S-36PE2
Tall Powered Damper
H 12G40-40E2
H 12G40-36PE2
H 12G50-40E2
H 12G50-36PE2
H 9G40-40E2
H 9G40-36PE2
H 9G50-40E2
H 9G50-36PE2
H 6G40-40E2
H 6G40-36PE2
H 6G50-40E2
H 6G50-36PE2
Tall Power Vent
H 6GR40PVE2-40
H 6GR40PVE2-36P
H 6GR50PVE2-42
H 6GR50PVE2-42P
Powered Damper
Ultra Low NOx
H 12G40-36NE2
H 12G50-36NE2
H 9G40-36NE2
H 9G50-36NE2
H 6G40-36NE2
H 6G50-36NE2
Power Direct Vent
H 6RHE40S
H 6RHE50
H 6G40PDV-40
H 6G40PDV-38
H 6G450PDV-40
H 6G50PDV-4
Short Power Vent
H 6GR40SPVE2-36
H 6GR40SPVE2-32P
H 6GR50SPVE2-36
H 6GR50SPVE2-32P
Electric
Power Vent Ultra Low NOx
H 6G40PV-36FN
H 6G40PV-38FN
ENERGY STAR®
ENERGY STAR® is a
joint program of the U.S.
Environmental Protection
Agency and the U.S.
Department of Energy
helping us all save money and protect
the environment through energy e
fficient
products and practices.
Hybrid Heat Pump
H 12E50-HP
H 12E80-HP
7
Encore® High Efficiency Condensing Power Direct Vent
Innovative Technology
Efficiency
• .82 EF
•E
NERGY STAR® rated
Performance
•F
HR: Up to 93 gallons for natural and LP gas
•R
ecovery: 43.6 to 48.5 GPH at a 90° F rise,
depending on model
• Integrated system control for easy installation
and service
•D
iagnostic system control can be replaced
without draining the water heater
Low Emissions
•E
co-friendly burner, low NOx design
Features
•P
ower direct vents are an ideal choice when
either indoor air quality or negative air pressure
are concerns
• Two-pipe system: one pipe pulls in outside
air for combustion and the other exhausts
combustion gases
• 120 VAC, 60Hz, induced draft blower
• New whisper quiet blower
Flammable Vapor Detection System
• FVIR compliant protective
• Control system that disables the heater in the
presence of flammable vapor a
ccumulation
Flexible Venting Options
• Long venting lengths up to 60 feet
• Use 2 or 3 inch diameter PVC, ABS, or CPVC
vent pipe options. (In Canada ULC S636 PVC
and CPVC must be used.)
• Vertical or horizontal termination
• Concentric vent kit available
Longer Life
• Dual anode rods protect the tank from corrosion
Plus…
• Enhanced-flow brass drain valve
• Temperature and pressure relief valve included
• Low lead compliant
• Durable silicon nitride igniter (HSI)
• Inlet tube with diffuser enhances heat transfer
• Front access to condensate trap and vent pipe
• Condensate neutralizer option
• Standard replacement parts
Gas Tank-Type
Self-Diagnostic System
• Proven center flue design with s ubmerged coil
type condensing heat exchanger
• Heat exchanger is porcelain coated inside and
out for increased product life
Warranty
•6
-Year limited tank and parts w
arranty*
*See Residential Warranty Certificate for complete
information
Units meet or exceed ANSI requirements and have been
tested according to D.O.E. procedures. Units meet or
exceed the energy efficiency requirements of NAECA,
ASHRAE standard 90, ICC Code and all state energy
efficiency performance criteria.
High Altitude Compliant
• Models are certified for applications up to 9,000
feet above sea level
LEED Points = 2
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
T
HT. TO
HT. TO
GAS INPUT IN RECOVERY IN FIRST HOUR
Y
TOP OF TOP OF
TANK
THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.
P GAL. MODEL
VENT AIR INLET
HT.
DIAM.
E
CAP.
NUMBER
NAT.LPNAT. LP NAT.LP A
B
C
D
Short 38
H 6RHE40S
Tall 48 H 6RHE50
8
HT. TO
GAS CONN.
E
ENERGY INFO.
WATER
HT. TO
WATER
FRONTESTIMATED
CONN.
SIDE T&P CONN.
TO
SHIP.
YEARLY
CNTR.
VALVE
SIZE BACK WT.ENERGYENERGY
F
G
H
I (LBS)FACTOR COST
40 36 48.543.6 74 74 60-3/860-1/8 51-1/1622-1/8 14-1/8
8
44-1/4 3/4 26-11/16220 0.82
$199
40 36 48.543.6 93 93 68-3/468-5/8 59-11/16
22-1/8 14-1/8
8
52-7/8 3/4 26-11/16250 0.82
$199
Estimated energy cost based on a national average fuel cost of $1.09/therm for natural gas and $2.41/gallon for LP. Energy Factor based on D.O.E. (Department of Energy) test p
rocedures.
H ENERGY STAR® compliant model.
Air-Inlet and Venting Information for 6RHE40S and 6RHE50
MODEL
NUMBER
VENT & COMBUSTION
AIR-INLET
PIPE DIAMETER
(INCHES)
MINIMUM ALLOWED
MAXIMUM ALLOWED
EQUIVALENT VENT & COMBUSTION EQUIVALENT VENT & COMBUSTION
AIR-INLET LENGTHS – AIR-INLET LENGTHS – EACH PIPE RUN (FT.)
EACH PIPE RUN (FT.)
From Sea Level Through 5,999 ft. Above Sea Level
6RHE40S
2
7
6RHE40S
3
7
6RHE50
2
7
6RHE50
3
7
From 6,000 ft. Above Sea Level Through 8,999 ft. Above Sea Level
6RHE40S
2
Not Allowed
6RHE40S
3
7
6RHE50
2
Not Allowed
6RHE50
3
7
30
60
30
60
Not Allowed
45
Not Allowed
45
T&P FITTING
3/4" NPT
VENT
AND COMBUSTION
AIR-INLET SYSTEM
TERMINATION(S)
90° ElbowsConcentric*
–
–
–
–
One 90° elbow is equivalent to 5 feet of straight pipe. One 45° elbow is equivalent to 2.5 feet of straight pipe. The vent and combustion air
inlet terminations are not included in the equivalency calculations.
* Use only Richmond 3 inch concentric termination kit SP20245.
H
HOT WATER
CONNECTION
H
COLD WATER
CONNECTION
COMBUSTION
AIR INLET
COMBUSTION
EXHAUST (VENT)
D
A BC
I
G
F
1/2"
E
9
Encore® XR90 Induced Draft
Efficiency
• .70 EF
•E
NERGY STAR® rated
•W
ell insulated for reduced stand-by heat loss
Performance
Compact Size
•S
mall foot print, 17-3/4 inch diameter
•F
ast one-man installation, compact and
light weight
Plus…
• 110 VAC draft inducer (includes 8-foot cord
with 3-prong plug)
• Standard atmospheric Category I, double-wall,
B-vent, 3” or 4” (4” adaptor included)
• Fan assisted draft inducer creates the proper
draft to expel the combustion gases
• Dual certified for both potable water and
space heating
• EverKleen™ patented system fights sediment
build-up
• Exclusive air/fuel shut-off device for double
protection
• Maintenance free – no filter to clean
• Disables the heater in the presence of
flammable vapor accumulation
Warranty
• 12-Year and 6-year limited tank and parts
warranties available*
Longer Life
information
Low Emissions
• Integrated self-diagnostic system control for
easy installation and service
•E
•M
eets 40 ng/J NOx requirements
Gas Tank-Type
•2
9-Gallon capacity with 90 gallon FHR
performance
•R
ecovery: 61 GPH at 90° F rise, exceeds
standard 50-gallon by up to 59%
Technology
• Premium grade anode rod provides long-lasting
tank protection
• Certified for applications up to 7,700 feet above
sea level
10
LEED Point = 1
DESCRIPTION
FEATURES
GAS INPUT IN
RECOVERY IN
FIRST HOUR
HT. TO
TANK
GAL. MODEL
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
VENT
HT.
DIAM.
CAP. NUMBER
NAT.
NAT.
NAT.
A
B
C
HT. TO
GAS
VENT CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
ENERGY INFO.
HT. TO
ESTIMATED
SIDE
WATER
SHIP.
YEARLY
T&P
CONN.
WT.
ENERGY
ENERGY
G
H
(LBS) FACTOR
COST
WARRANTY
YEARS
29
H 12G30-60
60
61
90
65-1/2
58-1/4 17-3/4
14
3 or 4
8
51-9/16
3/4
136
0.70
$233
12
29
H 6G30-60
60
61
90
65-1/2
58-1/4 17-3/4
14
3 or 4
8
51-9/16
3/4
136
0.70
$233
6
rocedures.
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
Footprint
omparison
C
Narrow 17-3/4
inch diameter fits
in a smaller space
than standard 40 or
50-gallon models.
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
XR90
50 Gal.
C
A B
1/2"
G
D
11
Encore® Powered Damper
Efficiency
Longer Life
Performance
• .67 - .69 EF
• ENERGY STAR® rated
tank protection
• Certified to 10,100 ft. above sea level (50-gallon
50K Btu/h model certified to 5,999 ft.)
Plus…
• EcoNet™ enabled WiFi-connected† technology
and free mobile app gives u
sers c
ontrol over
water s ystems, allowing for customizable
temperature, vacation settings, energy savings
and system monitoring at home or away.
Visit Rheem.com/EcoNetConnect
• Water sensor detects water outside of the unit
and sends an alert via the free EcoNet™ mobile
app to the h
omeowner
• Dual certified for both potable water and space
heating
• Electronic gas control for improved monitoring
and service
Low Emissions
• Eco-friendly burner, low NOx design
• Meets 40 ng/J NOx requirements
Technology
• 24 VAC flue damper, 110 VAC outlet required
• Includes 19-foot cord, 3-prong plug
•S
tandard Cat. I, double-wall, B-vent, 3”
(4” adaptor included)
• Exclusive air/fuel shut-off device
• 12-Year limited tank and parts w
arranty*
information
†
WiFi broadband internet connection required, WiFi Kit
sold separately
Tall 50 H 12G50-40E2
Tall 50 H 12G50-36PE2
Short 40
H 12G40S-40E2
Short 40
H 12G40S-36PE2
Short 50
H 12G50S-40E2
Short 50
H 12G50S-36PE2
H
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
1/2"
G
LEED Point = 1
D
DESCRIPTION
Tall 38 H 12G40-36PE2
ANODE ROD
H
HOT
WATER
CONNECTION
FEATURES
12
T
GAS INPUT IN
RECOVERY IN
Y
HT. TO
TANK
THOUS. BTU/H
G.P.H. 90° RISE
P GAL.MODEL
FIRST HOUR
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
LP
NAT.
LP
DEL. G.P.H.
A
B
C
Tall 38 H 12G40-40E2
Gas Tank-Type
• FHR: 68 - 89 gallons
• Recovery: Up to 40.4 GPH at a 90° F rise,
depending on model
Warranty
HT. TO
GAS VENT
CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
WATER
ESTIMATED
CONN.
SHIP.
YEARLY
SIZE
WT.
ENERGY ENERGY
H
(LBS)
FACTOR
COST
40
–
40.4
–
68
62-3/4 57-3/4 19-3/4
14
3 or 4
8
52-1/4
3/4
140
0.69
$237
–
36
–
36.4
68
62-3/4 57-3/4 19-3/4
14
3 or 4
8
52-1/4
3/4
140
0.69
$537
40
–
40.4
–
84
63
58
21-3/4
14
3 or 4
8
52-1/2
3/4
160
0.67
$244
–
36
–
36.4
84
63
58
21-3/4
14
3 or 4
8
52-1/2
3/4
160
0.67
$590
40
–
40.4
–
72
55-1/2 50-1/2 21-3/4
14
3 or 4
8
44
3/4
140
0.67
$244
–
36
–
36.4
72
55-1/2 50-1/2 21-3/4
14
3 or 4
8
44
3/4
140
0.67
$590
40
–
40.4
–
89
55-1/2 50-1/2 23-3/4
14
3 or 4
8
44
3/4
160
0.67
$244
–
36
–
36.4
89
55-1/2 50-1/2 23-3/4
14
3 or 4
8
44
3/4
160
0.67
$590
rocedures.
13
Encore® Atmospheric
Plus…
Efficiency
• .59 - 62 EF
• More hot water at a low operating cost
• Easy to light – no matches required
build-up
• Enhanced flow brass drain valve
Performance
FLUE
H
HOT
WATER
CONNECTION
Warranty
•E
xclusive air/fuel shut-off device
•M
aintenance free – no filter to clean
•D
isables the heater in the presence of
ANODE ROD
H
arranty*
F
E
information
Low Emissions
•E
•M
Longer Life
•P
remium grade anode rod provides long-lasting
tank protection
Gas Tank-Type
•F
HR: 68 to 103 gallons for natural gas
•R
ecovery: 36.4 to 51 GPH at a 90° F rise,
depending on model
LEED Point = 1
†
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
G
1/2"
D
14
DESCRIPTION
FEATURES
T
GAS INPUT IN
RECOVERY IN
Y
HT. TO TANK
THOUS. BTU/H
G.P.H. 90° RISE
P GAL.MODEL
FIRST HOUR
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
LP
NAT.
LP
DEL. G.P.H.
A
B
C
Tall4012GR40-40F3†
Tall4012GR40-36PF3†
Tall 50 12GR50-40F3†
Tall 50 12GR50-36PF3†
Tall 55 12G55-50F3
Tall 55 12G55-45PF3
Short 40
12GR40S-40F†
Short 40
12GR40S-36PF†
HT. TO
GAS VENT
CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
WATER
ESTIMATED
CONN.
SHIP.
YEARLY
SIZE
WT.
ENERGY ENERGY
H
(LBS)
FACTOR
COST
40
–
40.4
–
68
63-1/4
60
19-1/2
14
3 or 4
8
53-1/2
3/4
135
0.62
$263
–
36
–
36.4
68
63-1/4
60
19-1/2
14
3 or 4
8
53-1/2
3/4
135
0.62
$638
40
–
40.4
–
83
62-1/2 59-1/4 21-1/2
14
3 or 4
8
52-1/2
3/4
165
0.62
$263
–
36
–
36.4
83
62-1/2 59-1/4 21-1/2
14
3 or 4
8
52-1/2
3/4
165
0.62
$638
50
–
51
–
103
59-1/855-7/823-3/414-1/4
4
8
48-3/4
3/4
175
0.59
$277
–
45
–
46
103
59-1/855-7/823-3/414-1/4
4
8
48-3/4
3/4
175
0.59
$670
40
–
40.4
–
72
54
50-1/2
23
14
3 or 4
8
44
3/4
135
0.62
$263
–
36
–
36.4
72
54
50-1/2
23
14
3 or 4
8
44
3/4
135
0.62
$638
rocedures.
LEED Point = 1
†
15
Essential Plus Powered Damper
Efficiency
Longer Life
Performance
Plus…
• .67 - .69 EF
•E
NERGY STAR® rated
tank protection
50K Btu/h model certified to 5,999 feet above
sea level)
•E
lectronic gas control for improved monitoring
and service
heating
Low Emissions
•E
•M
F
E
information
•E
•M
•D
1/2"
Tall 50 H 9G50-40E2
Tall 50 H 9G50-36PE2
Short 40
H 9G40S-40E2
Short 40
H 9G40S-36PE2
Short 50
H 9G50S-40E2
Short 50
H 9G50S-36PE2
G
D
16
DESCRIPTION
Tall 38 H 9G40-40E2
3/4" N.P.T.
RELIEF
VALVE
OPENING
A B
FEATURES
T
GAS INPUT IN
RECOVERY IN
Y
HT. TO TANK
THOUS. BTU/H
G.P.H. 90° RISE
P GAL.MODEL
FIRST HOUR
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
LP
NAT.
LP
DEL. G.P.H.
A
B
C
COLD
WATER
CONNECTION
C
H
arranty*
•2
4 VAC flue damper, 110 VAC outlet required
• Standard Cat. I, double-wall, B-vent, 3”
ANODE ROD
H
HOT
WATER
CONNECTION
Warranty
Technology
Gas Tank-Type
•F
HR: 68 - 89 gallons
•R
depending on model
LEED Point = 1
HT. TO
GAS VENT
CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
WATER
ESTIMATED
CONN.
SHIP.
YEARLY
SIZE
WT.
ENERGY ENERGY
H
(LBS)
FACTOR
COST
40
–
40.4
–
68
62-3/4 57-3/4 19-3/4
14
3 or 4
8
52-1/4
3/4
140
0.69
$237
–
36
–
36.4
68
62-3/4 57-3/4 19-3/4
14
3 or 4
8
52-1/4
3/4
140
0.69
$573
40
–
40.4
–
84
63
58
21-3/4
14
3 or 4
8
52-1/2
3/4
160
0.67
$244
–
36
–
36.4
84
63
58
21-3/4
14
3 or 4
8
52-1/2
3/4
160
0.67
$590
40
–
40.4
–
72
55-1/2 50-1/2 21-3/4
14
3 or 4
8
44
3/4
140
0.67
$244
–
36
–
36.4
72
55-1/2 50-1/2 21-3/4
14
3 or 4
8
44
3/4
140
0.67
$590
40
–
40.4
–
89
55-1/2 50-1/2 23-3/4
14
3 or 4
8
44
3/4
160
0.67
$244
–
36
–
36.4
89
55-1/2 50-1/2 23-3/4
14
3 or 4
8
44
3/4
160
0.67
$590
rocedures.
17
Essential Plus Atmospheric
Efficiency
Plus…
• .60 - .62 EF
build-up
Performance
FLUE
arranty*
•E
•M
•D
H
HOT
WATER
CONNECTION
Warranty
ANODE ROD
H
F
E
information
Low Emissions
•E
•M
Longer Life
Gas Tank-Type
•F
HR: 73 to 93 gallons
•R
depending on model
LEED Point = 1
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
•P
tank protection
A B
G
1/2"
Altitude Certification
•A
ll models certified up to 5,999 ft. above sea
level, some certified up to 10,200
D
18
DESCRIPTION
FEATURES
T
GAS INPUT IN
RECOVERY IN
Y
HT. TO
TANK
THOUS. BTU/H
G.P.H. 90° RISE
P GAL.MODEL
FIRST HOUR
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
LP
NAT.
LP
DEL. G.P.H.
A
B
C
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
WATER
ESTIMATED
CONN.
SHIP.
YEARLY
SIZE
WT.
ENERGY ENERGY
H
(LBS)
FACTOR
COST
Tall
40 9G40-38F3
38
–
38.4
–
73
61-1/2 58-1/2
14-1/4
3 or 4
8
52-1/4
3/4
127
0.62
$263
Tall
50 9G50-38F3
38
–
38.4
–
93
61-1/4 58-3/8 20-1/2 14-1/4
3 or 4
8
51-3/8
3/4
150
0.60
$272
38
–
38.4
–
74
53-1/4 50-1/4 21-3/8 14-1/4
3 or 4
8
44
3/4
125
0.62
$263
–
35
–
35.4
74
53-1/4 50-1/4 21-3/8 14-1/4
3 or 4
8
44
3/4
125
0.62
$638
40
–
40.4
–
89
54-1/4 51-1/8 23-3/4 14-1/4
3 or 4
8
44
3/4
186
0.61
$268
–
36
–
36.4
89
54-1/4 51-1/8 23-3/4 14-1/4
3 or 4
8
44
3/4
186
0.61
$648
Short 40 9G40S-38F3
Short 40 9G40S-35PF3
Short 50 9G50S-40F3
Short 50 9G50S-36PF3
19
HT. TO
GAS VENT
CONN.
SIZE
D
E
rocedures.
19
Essential Plus Heavy Duty
Performance
•R
ecovery Capacity: 72.8 gallons per hour
(delivers approximately 113 g
allons of hot water
in the first hour for 75-gallon models and 115
gallons for 98-gallon models)**
Plus…
• Side water connections for space heating
applications
arranty*
information
Easy to Light
•P
iezo Ignitor - no matches required
Safety and Construction | Design certified by CSA: For
operation at 160 degrees; meets all safety and c onstruction
requirements of ANSI Z21.10.3; as an automatic s torage
or instantaneous water heater; as an automatic circulating
tank water heater; and for operation on combustible floors
and in alcove installations. All models are North Carolina
Code c ompliant. C
ertified for 150 PSI maximum working
pressure.
Gas Tank-Type
Warranty
•E
•M
•D
Efficiency | All models tested a ccording to ANSI test
procedures, and meet or exceed the thermal efficiency and
standby loss requirements of current ASHRAE standard
(EPact). Also exceeds energy efficiency codes of all states
including C
alifornia Energy Commission (CEC).
Low Emissions
•E
•M
Longer Life
•P
tank protection
20
DESCRIPTION
FEATURES
T
HT. TO
WATER
HT. TO
WATER
GAS INPUT IN
RECOVERY IN
Y
HT. TO
TANK
GAS VENT
CONN.
SIDE T&P
CONN.
SHIP.
THOUS. BTU/H
G.P.H. 100° RISE**
P GAL.MODEL
VENTHT. DIAM. CONN. SIZE CNTR. VALVE SIZEWT.
E CAP. NUMBER
NAT.
LP
NAT.
LP
A
B
C
D
E
F
G
H
(LBS)
Tall
75
6G75-76F
Tall
75
6G75-76PF
75.1 –72.8– 64
60
26-1/4
14-3/4
4 1153-1/4
1320
– 75.1–72.864
60
26-1/4
14-3/4
4 1153-1/4
1320
Tall
98
5V100F-76N
75.1 –72.8–
67-7/8
64
28-1/4
14-7/8
4 11
57-3/16
1350
Tall
98
5V100F-76P
– 75.1–72.8
67-7/8
64
28-1/4
14-7/8
4 11
57-3/16
1350
**Recovery Capacity is based upon a 100° F water temperature rise and calculated per ANSI Z21.10.3 standards. First hour hot water delivery is based upon 77° water temperature rise.
• 160° F Max. temperature setting.
FLUE
ANODE ROD
H
H
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
F
E
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
G
SIDE TAPS
1/2"
D
21
Essential Plus Heavy Duty Power Direct Vent
Performance
•R
(delivers approximately 120 gallons of hot water
in the first hour)**
•E
and service
•E
Features
•T
wo pipe system: one pipe pulls in outside
combustion gases
•1
20 VAC powered blower
•N
ew whisper quiet blower
tank protection
Plus…
• Side taps for space heating a
pplications
build-up
Warranty
including C
Code c ompliant. C
pressure.
arranty*
COMBUSTION
AIR INLET
information
T&P FITTING
3/4" N.P.T.
•P
rotective control system that disables the
heater in the presence of fl ammable vapor
accumulation
BA C
1/2"
H
COLD
WATER
CONNECTION
F
G
22
FEATURES
Tall
75
6G75PDV-76
I
H
E
T
GAS INPUT IN
RECOVERY IN
Y
THOUS. BTU/H G.P.H. 100° RISE**
P GAL.MODEL
E CAP. NUMBER
NAT.
LP
NAT.
LP
Tall
75
6G75PDVP-76
SIDE TAPS
D
•L
ong venting lengths up to 100 feet
• 3” or 4” PVC, ABS, or CPVC vent pipe options
DESCRIPTION
COMBUSTION
EXHAUST
(VENT)
HOT
WATER
CONNECTION
Gas Tank-Type
Low Emissions
Longer Life
HT. TO
TOP OF
VENT
A
HT. TO
TOP OF
TANK
AIR INLET
HT.
DIAM.
B
C
D
HT. TO
GAS CONN.
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
WATER
FRONT
CONN.
TO
SHIP.
SIZEBACK WT.
H
I
(LBS)
75.1
–72.8
– 70-3/871-1/460-1/226-1/4 15
11
53
1 36-3/4 325
–
75.1–
72.870-3/871-1/460-1/226-1/4 15
11
53
1 36-3/4 325
Vent and Combusion Air-Inlet System Information
FROM SEA LEVEL THROUGH 2,000 FT. ABOVE SEA LEVEL
MODEL
6G75PDV-76
6G75PDV-76
6G75PDV-76
VENT & COMBUSTION AIR-INLET
SYSTEM DIAMETER (INCHES)
MIN. ALLOWED EQUIV. VENT & COMBUSTION
AIR-INLET LENGTHS – EACH PIPE RUN (FT.)
3
3
4
8
8
8
MAX. ALLOWED EQUIV. VENT & COMBUSTION
VENT AND COMBUSTION
AIR-INLET LENGTHS – EACH PIPE RUN (FT.) AIR-INLET SYSTEM TERMINATION(S)
50
40
100
90° Elbows
–
–
Concentric*
90° Elbows–
FROM 2,001 FT. ABOVE SEA LEVEL THROUGH 5,999 FT. ABOVE SEA LEVEL
MODEL
6G75PDV-76
6G75PDV-76
6G75PDV-76
3
3
4
8
8
8
VENT AND COMBUSTION
25
20
100
90° Elbows
–
–
Concentric*
90° Elbows–
MODEL
6G75PDV-76
4
8
VENT AND COMBUSTION
One 90° elbow is approximately equivalent to 5 feet of pipe. One 45° elbow is approximately equivalent to 2.5 feet of pipe.
50
90° Elbows
* Use only Richmond 3 inch concentric termination.
–
23
Essential Plus Heavy Duty Power Vent
Performance
Longer Life
• Recovery Capacity: 72.8 gallons per hour
(delivers approximately 120 gallons of hot water
in the first hour)**
Low Emissions
Plus…
•E
• Durable silicon nitride ignitor (HSI)
build-up
Features
•U
ses indoor air for combustion; blower
exhausts the flue gases
•S
tandard 110 VAC electrical connection
•N
•O
ffers larger capacities than the standard
Power Vent
Code c ompliant. C
pressure.
Warranty
arranty*
•E
•M
•D
tank protection
including C
Gas Tank-Type
•E
and service
• Long venting lengths up to 100 equivalent feet
• PVC, ABS, or CPVC vent pipe options
information
24
DESCRIPTION
FEATURES
T
HT. TO
HT. TO
WATER
HT. TO
WATER
GAS INPUT IN
RECOVERY IN
Y
TOP OF
TANK
GAS
CONN.
SIDE T&P
CONN.
SHIP.
THOUS. BTU/H
G.P.H. 100° RISE**
P GAL.MODEL
ASSEMBLYHT. DIAM. CONN. CNTR. VALVE SIZEWT.
E
CAP.
NUMBER
NAT.
LP
NAT.
LP AB CDE F G
(LBS)
Tall
75
6G75PV-76FW
Tall
75
6G75PV-76PFW
75.1 – 72.8–
7260-1/8
26-1/4
14-1/211 53-1/4 1 330
– 75.1 –72.8 7260-1/8
26-1/4
14-1/211 53-1/4 1 330
• 160° F Max. temperature setting.
• Features side water connections for space heating applications.
POWER VENT
ASSEMBLY
75-Gallon
G
HOT
WATER
CONNECTION
MODEL
ANODE ROD
G
Maximum and Minimum Vent Lengths for 3” and 4" Vents
VENT SYSTEM
DIAMETER
MIN. ALLOWED EQUIVALENT VENT
LENGTHS (EACH PIPE RUN)
MAX. ALLOWED EQUIVALENT VENT
LENGTHS (EACH PIPE RUN)
VENT SYSTEM
TERMINATION(S)
3 Inches
10 Feet
50 Feet
90° Elbow
4 Inches
10 Feet
100 Feet
90° Elbow
E
T&P FITTING
3/4" N.P.T.
C
For the 3" and 4" vent, one 90° elbow is approximately equal to 5 feet of pipe. One 45° elbow is approximately equal to 2.5 feet of pipe.
NOTICE: The mixing of 3" and 4" vent pipe is not recommended. If 4" pipe is used, a 3" to 4" reducer fitting is recommended at the
rubber coupling.
This water heater is supplied with a 3" Schedule 40 PVC 90° vent terminal. When venting with 4" pipe, a Schedule 40 PVC 90° vent terminal
must be used. Screens for both 3" and 4" vent terminals have been included.
COLD
WATER
CONNECTION
A B
F
1/2"
SIDE TAPS
(75 GAL.
MODEL
ONLY)
D
25
Essential Powered Damper
Efficiency
Longer Life
Performance
Plus…
• .67 - .69 EF
•E
NERGY STAR® rated
tank protection
50K Btu/h model certified to 5,999 feet above
sea level)
•E
and service
heating
Low Emissions
•E
•M
F
E
information
•E
•M
•D
DESCRIPTION
FEATURES
Tall 38 H 6G40-40E2
Tall 50 H 6G50-40E2
Short 40
H 6G40S-40E2
Short 40
H 6G40S-36PE2
Short 50
H 6G50S-40E2
Short 50
H 6G50S-36PE2
3/4" N.P.T.
RELIEF
VALVE
OPENING
A B
1/2"
G
D
26
T
GAS INPUT IN
RECOVERY IN
Y
HT. TO TANK
THOUS. BTU/H
G.P.H. 90° RISE
P GAL.MODEL
FIRST HOUR
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
LP
NAT.
LP
DEL. G.P.H.
A
B
C
COLD
WATER
CONNECTION
C
H
arranty*
•2
ANODE ROD
H
HOT
WATER
CONNECTION
Warranty
Technology
Gas Tank-Type
•F
HR: 68 - 89 gallons
•R
ecovery: Up to 40.4 GPH at a 90° F rise,
depending on model
LEED Point = 1
HT. TO
GAS VENT
CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
ENERGY INFO.
WATER
ESTIMATED
CONN.
SHIP.
YEARLY
SIZE
WT.
ENERGY ENERGY
H
(LBS)
FACTOR
COST
40
–
40.4
–
68
62-3/4 57-3/4 19-3/4
14
3 or 4
8
52-1/4
3/4
140
0.69
$237
–
36
–
36.4
68
62-3/4 57-3/4 19-3/4
14
3 or 4
8
52-1/4
3/4
140
0.69
$537
40
–
40.4
–
84
63
58
21-3/4
14
3 or 4
8
52-1/2
3/4
160
0.67
$244
–
36
–
36.4
84
63
58
21-3/4
14
3 or 4
8
52-1/2
3/4
160
0.67
$590
40
–
40.4
–
72
55-1/2 50-1/2 21-3/4
14
3 or 4
8
44
3/4
140
0.67
$244
–
36
–
36.4
72
55-1/2 50-1/2 21-3/4
14
3 or 4
8
44
3/4
140
0.67
$590
40
–
40.4
–
89
55-1/2 50-1/2 23-3/4
14
3 or 4
8
44
3/4
160
0.67
$244
–
36
–
36.4
89
55-1/2 50-1/2 23-3/4
14
3 or 4
8
44
3/4
160
0.67
$590
rocedures.
27
Essential Atmospheric
Efficiency
Plus…
• .59 - .63 EF
Performance
•E
•M
•D
H
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
G
1/2"
Warranty
arranty*
D
information
Low Emissions
ANODE ROD
H
HOT
WATER
CONNECTION
FLUE
ANODE ROD
H
•E
•M
Longer Life
•P
tank protection
Gas Tank-Type
•F
HR: 55 to 103 gallons
•R
ecovery: 30.3 to 61 GPH at a 90° F rise,
depending on model
FLUE
build-up
applications on the 48-gallon tall model**
H
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
F
E
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
G
•A
level, some certified up to 10,200
SIDE TAPS
**48-gallon tall
model with
side water
connections
1/2"
D
48-gallon tall**
†LEED Point = 1
DESCRIPTION
FEATURES
T
GAS INPUT IN
RECOVERY IN
Y
HT. TO
TANK
THOUS. BTU/H
G.P.H. 90° RISE
P GAL.MODEL
FIRST HOUR
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
LP
NAT.
LP
DEL. G.P.H.
A
B
C
Tall 29 6G30-32F3
Tall 29 6G30-30PF3
Tall 40 6G40-36F3†
Tall406G40-32PF3†
Tall 40 6GR40-40F3†
Tall 40 6GR40-36PF3†
Tall 48 6G50-60F3
Tall 48 6G50-54PF3
Tall 50 6GR50-40F3†
Tall 50 6GR50-36PF3†
Tall 50 6G50-38F3†
Tall 50 6G50-36PF3†
Tall 55 6G55-50F3
Tall 55 6G55-45PF3
Short 30 6G30S-30F3
Short 40 6G40S-34F3†
Short 40 6G40S-31PF3†
32
–
36
–
40
–
60
–
40
–
38
–
50
–
30
34
–
38
–
40
–
–
30
–
32
–
36
–
54
–
36
–
36
–
45
–
–
31
–
35
–
36
32.3
–
36.4
–
40.4
–
61
–
40.4
–
38.4
–
51
–
30.3
34.3
–
38.4
–
40.4
–
–
30.3
–
32.3
–
36.3
–
55
–
36.4
–
36.4
–
46
–
–
31.3
–
35.4
–
36.4
55
55
67
–
68
68
93
93
83
83
93
93
103
103
54
75
75
74
74
89
89
HT. TO
GAS VENT
CONN.
SIZE
D
E
59-3/4 56-7/8 16-1/2 14-1/4
59-3/4 56-7/8 16-1/2 14-1/4
61-1/2 58-1/2
19
14-1/4
61-1/2 58-1/2 18-1/2 14-1/4
63-1/4
60
19-1/2
14
63-1/4
60
19-1/2
14
61-3/458-1/221-3/414-3/8
61-3/458-1/221-3/414-3/8
62-1/2 59-1/4 21-1/2 14-1/2
62-1/2 59-1/4 21-1/2 14-1/2
61-1/4 58-3/8 20-1/2 14-1/4
61-1/4 58-3/8 20-1/2 14-1/4
59-1/855-7/823-3/414-1/4
59-1/855-7/823-3/414-1/4
49-7/8
47
19-3/4 14-1/4
52-1/8 49-1/4
21
14-1/4
52-1/8 49-1/4
21
14-1/4
53-1/4 50-1/4 21-3/8 14-1/4
53-1/4 50-1/4 21-3/8 14-1/4
54-1/4 51-1/8 23-3/4 14-1/4
54-1/4 51-1/8 23-3/4 14-1/4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
4
4
3 or 4
3 or 4
3 or 4
3 or 4
4
4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
WATER
CONN.
CNTR.
F
8
8
8
8
8
8
11
11
8
8
8
8
8
8
8
8
8
8
8
8
8
HT. TO
SIDE T&P
VALVE
G
50-3/4
50-3/4
52-1/4
52-1/4
53-1/2
53-1/2
51-7/8
51-7/8
52-1/2
52-1/2
51-3/8
51-3/8
48-3/4
48-3/4
40-3/8
42-3/4
42-3/4
44
44
44
44
28
ENERGY INFO.
WATER
ESTIMATED
CONN.
SHIP.
YEARLY
SIZE
WT.
ENERGY ENERGY
H
(LBS)
FACTOR
COST
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
110
110
127
125
135
135
150
150
165
165
150
150
175
175
112
120
120
125
125
186
186
rocedures.
0.63
$259
0.63
$628
0.62
$263
0.62
$638
0.62
$263
0.62
$638
0.60
$272
0.60
$659
0.62
$263
0.62
$638
0.60
$272
0.60
$659
0.59
$277
0.59$670
0.63
$259
0.62
$263
0.62
$638
0.62
$263
0.62
$638
0.61
$268
0.61
$648
29
Essential Power Vent
Efficiency
• .67 EF
•E
NERGY STAR® rated
• Long venting lengths up to 100 equivalent feet
• 2” or 3” PVC, ABS, or CPVC vent pipe options
Performance
Longer Life
•E
and service
• Tall models certified for applications up to 7,700
ft. above sea level and short models up to
5,999 feet above sea level
Low Emissions
Plus…
tank protection
•E
•U
ses indoor air for combustion; blower
exhausts the flue gases
•S
tandard 120 VAC electrical connection
•N
E
C
A B
F
1/2"
information
D
30
DESCRIPTION
FEATURES
T
GAS INPUT IN
RECOVERY IN
Y
THOUS. BTU/H
G.P.H. 90° RISE
P GAL.MODEL
FIRST HOUR
E CAP. NUMBER
NAT.
LP
NAT.
LP
DEL. G.P.H.
Tall40H 6GR40PVE2-40
Tall 40 H 6GR40PVE2-36P
Tall 50 H 6GR50PVE2-42
Tall 50 H 6GR50PVE2-42P
Short 40 H 6GR40SPVE2-36
Short 40 H 6GR40SPVE2-32P
Short 50 H 6GR50SPVE2-36
Short 50 H 6GR50SPVE2-32P
G
COLD
WATER
CONNECTION
T&P FITTING
3/4" N.P.T.
arranty*
•E
•M
•D
ANODE ROD
G
HOT
WATER
CONNECTION
Warranty
POWER VENT
ASSEMBLY
• Durable Silicon Nitride Ignitor (HSI)
build-up
Features
LEED Point = 1
Gas Tank-Type
•F
HR: Up to 87 gallons for 50-gallon models and
up to 73 gallons for 40-gallon models
•R
depending on model
40
–
42
–
36
–
36
–
–
36
–
42
–
32
–
32
40.4 –
– 36.4
42.4 –
– 42.4
36.4 –
– 32.4
36.4 –
– 32.4
HT. TO
TOP OF
TANK
ASSEMBLY
HT.
DIAM.
A
B
C
68
68
87
87
73
73
87
87
HT. TO
GAS
CONN.
D
67-3/85919-3/4
67-3/85919-3/4
66-3/85821-3/4
66-3/85821-3/4
62-1/2 51-1/421-3/4
62-1/2 51-1/421-3/4
62-1/2 51-1/423-3/4
62-1/2 51-1/423-3/4
WATER
CONN.
CNTR.
E
14
14
14
14
14
14
14
14
HT. TO
SIDE T&P
VALVE
F
ENERGY INFO.
WATER
ESTIMATED
CONN.
SHIP.
YEARLY
SIZE
WT.
ENERGY ENERGY
G
(LBS)
FACTOR
COST
8 53-1/23/4
8 53-1/23/4
8 52-1/23/4
8 52-1/23/4
8 44-1/4 3/4
8 44-1/4 3/4
8
44
3/4
8
44
3/4
140
140
170
170
155
155
175
175
0.67
0.67
0.67
0.67
0.67
0.67
0.67
0.67
$244
$590
$244
$590
$244
$590
$244
$590
rocedures.
Maximum and Minimum Vent Lengths for 2” Vents
NUMBER OF
90° ELBOWS
NUMBER
WITH VENT OF 45° TERMINAL
ELBOWS
MINIMUM PIPE LENGTH
REQ. (FT.)
MAXIMUM
PIPE LENGTH (FT.)
0’ - 2000’
MAXIMUM
PIPE
LENGTH (FT.)
2000’ - 7700’ *
One (1)
None
4.0
44.0
24.0
One (1)
One (1)
4.0
41.0
21.0
Two (2)
None
4.0
38.0
18.0
Two (2)
One (1)
4.0
35.0
Three (3)
None
4.0
32.0
For the 2” vent, one 90°
elbow is approximately
equal to 6 feet of pipe.
One 45° elbow is
approximately equal to
3 feet of pipe.
*2,000’ – 6,000’ for
short models.
NUMBER OF
90° ELBOWS
NUMBER
ELBOWS
MINIMUM PIPE LENGTH
REQ. (FT.)
MAXIMUM
PIPE LENGTH (FT.)
0’ - 2000’
MAXIMUM
PIPE
LENGTH (FT.)
2000’ - 7700’ *
One (1)
None
5.0
95.0
75.0
One (1)
One (1)
5.0
92.5
72.5
Two (2)
None
5.0
90.0
70.0
15.0
Two (2)
One (1)
5.0
87.5
67.5
12.0
Three (3)
None
5.0
85.0
65.0
For the 3” vent, one 90°
elbow is approximately
equal to 5 feet of pipe.
One 45° elbow is
approximately equal to
2.5 feet of pipe.
*2,000’ – 6,000’ for
short models.
31
Essential Power Direct Vent
Efficiency
• .62 - .67 EF
•E
NERGY STAR® rated on select models
Performance
Longer Life
tank protection
Gas Tank-Type
•F
HR: Up to 111 gallons for natural and LP gas
•R
depending on model
•E
and service
• Models are certified for applications up to 10,200
feet above sea level
Low Emissions
LEED Point = 1
Plus…
•E
COMBUSTION
AIR INLET
build-up
Features
•T
wo pipe system: one pipe pulls in outside
combustion gases
•1
20 VAC powered blower
•N
Warranty
•D
flammable vapors
arranty*
T&P FITTING
3/4" N.P.T.
I
H
HOT
WATER
CONNECTION
H
COLD
WATER
CONNECTION
D
BA C
information
COMBUSTION
EXHAUST
(VENT)
F
G
1/2"
E
32
DESCRIPTION
FEATURES
T
GAS INPUT IN
RECOVERY IN FIRST HOUR
Y
NATURAL GAS
THOUS. BTU/H G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
E CAP. NUMBER*
NAT.
LP
NAT.
LP
NAT.
LP
Tall 40 H 6G40PDV-40
Tall 40 H 6G40PDVP-38
Tall 50 H 6G50PDV-40
Tall 50 H 6G50PDVP-40
Tall 50 6G50PDV-65†
Tall 50 6G50PDVP-50†
40
–
40.4
–
–
38
–
38.4
73 –
40
–
40.4
–
–
40
–
40.4
65
–
65.7
–
111
–
–
47
–
47.5
–
92
HT. TO
TOP OF
VENT
A
HT. TO
TOP OF
TANK
AIR INLET
HT.
DIAM.
B
C
D
HT. TO
GAS CONN.
E
WATER
CONN.
CNTR.
F
ENERGY INFO.
HT. TO
WATER FRONT
ESTIMATED
SIDE T&P CONN.
TO
SHIP.
YEARLY
VALVE
SIZEBACKWT.ENERGY ENERGY
G
H
I
(LBS) FACTOR
COST
68-1/2
69-1/4 60-1/419-3/4 14
8
53-3/4
3/4 29-1/2 180
0.67
$244
– 73 68-1/2
69-1/4 60-1/419-3/4 14
8
53-3/4
3/4 29-1/2 180
0.67
$590
67-5/8
67-7/8 59-3/821-3/4 14
8
52-3/4
3/4 31-1/2 205
0.67
$244
– 93 67-5/8
67-7/8 59-3/821-3/4 14
8
52-3/4
3/4 31-1/2 205
0.67
$590
67-5/8
68-3/8 59-3/8 21-3/4
14
8
52-3/4
3/4 31-1/2 210
0.62
$263
67-5/8
68-3/8 59-3/8 21-3/4
14
8
52-3/4
3/4 31-1/2 210
0.62
$638
93 –
rocedures.
† These models feature side water connections for space heating applications.
Air-Inlet and Venting Information – See Next Page.
33
Air-Inlet and Venting Information
MODEL
2
3
3
2
3
3
7
7
7
7
7
7
6G40PDV
6G40PDV
6G40PDV
6G50PDV
6G50PDV
6G50PDV
VENT AND COMBUSTION
30
60
50
30
60
50
90° Elbows
90° Elbows
–
90° Elbows
90° Elbows
–
Concentric*
–
Concentric*
Concentric*
–
Concentric*
MODEL
2
2
3
3
2
3
3
7
7
7
7
7
7
7
6G40PDV
6G40PDV
6G40PDV
6G40PDV
6G50PDV
6G50PDV
6G50PDV
VENT AND COMBUSTION
15
30
60
50
15
60
50
90° Elbows
–
90° Elbows
–
–
90° Elbows
–
–
Concentric*
–
Concentric*
Concentric*
–
Concentric*
Gas Tank-Type
34
MODEL
6G40PDV
6G40PDV
6G40PDV
6G50PDV
6G50PDV
2
3
3
3
3
7
7
7
7
7
VENT AND COMBUSTION
15
60
50
60
50
–
90° Elbows
–
90° Elbows
–
Concentric*
–
Concentric*
–
Concentric*
35
MODEL
VENT AND COMBUSTION
3
7
50
90° Elbows
–
3
7
40
–
Concentric*
6G50PDV-65
4
7
100
90° Elbows
–
MODEL
VENT AND COMBUSTION
6G50PDV-65
3
7
50
90° Elbows
–
6G50PDV-65
3
7
40
–
Concentric*
6G50PDV-65
4
7
100
90° Elbows
–
Gas Tank-Type
6G50PDV-65
6G50PDV-65
36
MODEL
VENT AND COMBUSTION
6G50PDV-65
3
7
50
90° Elbows
–
6G50PDV-65
3
7
40
–
Concentric*
6G50PDV-65
4
7
100
90° Elbows
–
MODEL
6G50PDV-65
3
7
25
90° Elbows
–
6G50PDV-65
3
7
20
–
Concentric*
7
100
90° Elbows
–
6G50PDV-654
VENT AND COMBUSTION
37
Essential Direct Vent
Low Emissions
Efficiency
• .60 - .62 EF
•W
ell insulated for reduced stand-by heat loss
Longer Life
Performance
tank protection
•F
HR: 80 gallons for 50-gallon model and
66 gallons for 40-gallon model
•R
depending on model
Plus…
Technology
•A
djustable coaxial vent allows
flexibility of installation, can
swivel 360 degrees and uses
outside air for c
ombustion and
requires no electrical power
• Aluminum vent and cap base to prevent
staining of building exterior
Longer Venting
•U
p to 4 feet above the water heater and 4 feet
from an o
utside wall
•O
rder Horizontal Vent Kit: #SP20131
•O
rder Vertical Vent Kit: #SP20132
Gas Tank-Type
• Specially formulated glass lining prevents
corrosion and extends the life of the tank
• Heat saving flue baffle design
• Gas control and combination thermostat
• Piezo ignition
• High temperature silicone bands reduce venting
installation time
• Internal air tube for reduced footprint
build-up
Warranty
arranty*
information
•A
level
LEED Point = 1
DESCRIPTION
FEATURES
T
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
HT. TO
TANK
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
LP
NAT.
LP
NAT.
LP
A
B
C
Tall
40
6GDV40F3
Tall
40
6GDV40PF3
Tall
50 6GDV50F3
Tall
50 6GDV50PF3
38
HT. TO
GAS VENT
CONN.
SIZE
D
E
ENERGY INFO.
HT. TO
SIDE T&P
SHIP.
VALVE
WT.
ENERGY
F
(LBS)
FACTOR
ESTIMATED
YEARLY
ENERGY
COST
36 – 36.4– 66–68-1/460-7/819-3/414-1/4
6
51-5/8155 0.62 $263
– 30 –30.3–66
68-1/460-7/819-3/414-1/4
6
51-5/8155 0.62 $638
36
–
36.4
–
80
–
68
59-5/8
21-3/4
14-1/4
6
52-1/2
165
0.60
$272
–
33
–
33.3
–
80
68
59-5/8
21-3/4
14-1/4
6
52-1/2
165
0.60
$659
rocedures.
VENTING – ROUGHING IN DIMENSIONS (INCHES)
MODEL
4 FEET VENTING
TYPE NUMBER
AVAILABLE
SIDE VENTING (G) WITH
INCLUDED VENT KIT
SIDE VENTING (G) WITH
OPTIONAL VENT KIT
OPTIONAL HEIGHT (A)
MIN.
MAX.
WITH VENT KIT
MIN.
MAX.
Tall
6DV40F3
Horiz. & Vertical 9-1/8
19-1/8
9-1/8
48**
68-1/4 – 107-3/4†
Tall
6DV50F3
Horiz. & Vertical 8-1/8
18-1/8
8-1/8
48**
68 – 107†
**Horizontal Vent Kit #SP20131 for applications up to 2,000 ft. above sea level. Optional horizontal venting not
applicable for installations above 2,000 ft. Venting dimensions are approximate.
†
Vertical Vent Kit #SP20132. Venting dimensions are approximate.
E
G
10"
COLD WATER
CONNECTION
(G: SIDE VENTING
RANGE OF
ADJUSTMENT)
3/4" N.P.T.
RELIEF VALVE
OPENING
A
C
B
HOT WATER
CONNECTION
F
1/2"
D
EXTERIOR
WALL
39
Essential Atmospheric for Manufactured Housing
Efficiency
• .62 - .63 EF
Performance
Longer Life
•P
tank protection
•E
•M
•D
Flexibility
•F
ield convertible controls and burner
assembly for natural gas or LP operation
included
Low Emissions
• Eco-friendly burner, low NOx design
Plus…
• Certified for manufactured (HUD) and m
odular
construction
• Side inlet temperature and pressure relief valve
opening
• Factory installed temperature and pressure relief
valve – side location
• Two hole top for anode rod and hot water outlet
• Piezo ignition – easy light pilot, no matches
required
• Cold water inlet – side connection a
llows for
quick, e
conomical hook-up
• Optional leg kit for replacement units
build-up
Warranty
•6
-Year limited tank and parts w
arranty*
information
Gas Tank-Type
•F
HR: 59 gallons for 40-gallon model and 58
gallons for 29-gallon model
•R
depending on model
• Up to 8,400 ft. above sea level for the 40-gallon
model
• Up to 5,999 ft. above sea level for the 29-gallon
model
• High altitude models available for 29-gallon
Draft Diverter
Improved design p
rovides
efficient heating with
down-draft protection.
LEED Point = 1
DESCRIPTION
FEATURES
40
ENERGY INFO.
T
HT. TO
WATER
HT. TO
ESTIMATED
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
HT. TO
TANK
GAS
VENT
CONN. SIDE T&P
SHIP.
YEARLY
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
VENT HT. DIAM. CONN.SIZE CNTR.VALVE WT. ENERGY ENERGY
E CAP. NUMBER
NAT.
LP
NAT.
LP
NAT.
LP
A
B
C
D
E
F
G
(LBS)
FACTOR
COST
Tall
29 6V30FT3
32
30
32.3
30.3
58
58
59-5/8
56-7/8
16-1/2
14-3/8
3 or 4
8
50-7/8
110
0.63
$259 Nat
Tall
40 6V40FT3
34
32
34.3
32.3
59
59
61-1/2
58-1/2
18-1/2
14-3/8
3 or 4
8
52-1/4
125
0.62
$263 Nat
rocedures.
FLUE
3/4" N.P.T.
ROOF JACKS
PART NO.
ROOF OPENING
TO FLOOR DIM.
ROOF JACK
ADJ. RANGE
AP12118B*
98" Min./126" Max.
16" Min./32"Max.
AP12118C*
112" Min./154" Max.
30" Min./60" Max.
AP12118D*
130" Min./189" Max.
48" Min./95" Max.
AP12119B†
94" Min./106" Max.
12"
* Adjustable length roof jacks
†Fixed length roof jacks
Roof jack must be ordered separately with 29 and 40-gallon atmospheric m
odels
and must be in accordance with instructions furnished with the heater. Clamps
and secure strapping are packed in water heater carton.
ANODE ROD
HOT
WATER
CONNECTION
F
E
C
A B
1/2"
D
3/4" N.P.T.
RELIEF
VALVE
OPENING
COLD
WATER
CONN.
3/4"
N.P.T.
G
20-1/8"
41
Essential Direct Vent for Manufactured Housing
Plus…
Efficiency
• .62 - .63 EF
Performance
• FHR: 64 gallons for 40-gallon model and 49
gallons for 30-gallon model
• Recovery: 30.3 GPH at a 90° F rise
• Field convertible controls for natural gas or LP
operation included
• No external door is required
• Provides maximum design freedom since it can
be placed anywhere within the home
• Hot water outlet located at top
• Cold water inlet at side for fast, economical
hook-up
•A
level
Design allows a
djustment
to roof pitches of up to
5/12". Four roof
jacks available to
accommodate roof
thickness of 12" up to 95".
Warranty
Gas Tank-Type
Flexibility
Adjustable Roof
Jack Vent
odular
construction
• Piezo ignition – easy light pilot
• Factory installed temperature and pressure relief
valve – side location
build-up
Direct Combustion
Air Inlet
arranty*
Air is drawn directly into
combustion chamber
through air inlet fixed
to base; 1/2" screen for
rodent protection.
information
Longer Life
•P
tank protection
LEED Point = 1
DESCRIPTION
FEATURES
42
T
Y
GAS INPUT IN
RECOVERY IN FIRST HOUR
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H.
VENT
HT.
DIAM.
E CAP.NUMBER
NAT./LP
NAT./LP
NAT./LP
A
B
C
HT. TO
GAS
VENT
CONN.
SIZE
D
E
ENERGY INFO.
ROOF HT. TO
WATER
ESTIMATED
JACK
SIDE T&P CONN. SHIP.
YEARLY
VENT SIZE
VALVE
SIZEWT.ENERGY ENERGY
F
G
H
(LBS) FACTOR
COST
Tall
30 MVR30DV3
30
30.3
49
56-5/8
56-5/8 17-3/4 14-1/8
3
5
51-1/8
20
110
0.63
$259 Nat
Tall
40 MVR40DV3
30
30.3
64
57-3/8
57-3/8 19-3/4 14-1/8
3
5
51-1/8
20
125
0.62
$263 Nat
rocedures.
ADJUSTS TO PITCHES
OF UP TO 5/12"
ROOF JACKS
12" Non-Adjustable & Air Inlet 15-32" Adjustable & Air Inlet
30-60" Adjustable & Air Inlet
48-95" Adjustable & Air Inlet
AP12032E
AP12032B
AP12032C
AP12032D
AIR INLET
6" Non-Adjustable
11-22" Adjustable
AP12019B
AP12017B
EXTENSION PIPE KIT
Roof Jack Extension Pipe Kit
AP12021
oof jack and air inlet must be ordered separately with 30
R
and 40-gallon direct vent models and must be in accordance
with instructions furnished with the heater. No other roof jack
or air inlet assemblies are approved for installation with this
heater. Clamps and secure strapping are packed in water
heater carton.
F
24" MIN.
A
B
E
0" MIN.
WALL
CLEARANCE
C
RELIEF
VALVE
COLD
WATER
CONN.
G
1/2"
D
WATER CONNECTIONS
ALL 3/4" N.P.T.
2"
H
43
Essential Direct Vent Co-Axial for Manufactured Housing
Self Cleaning
Efficiency
TOP VIEW OF CLOSET
build-up
• .60 - .62 EF
Performance
Flexibility
•F
ield convertible controls and burner
assembly for natural gas or LP operation
included
•R
oof jack flange adjustment range available
up to 34° (8 - 12)
•N
ew smaller foot print – no external air tube
• Can be installed anywhere in the home
•3
/4” hot and cold top connections
•E
asily fits into a standard drain pan
•A
ll models certified up to 7,700 ft. above
sea level
Plus…
odular
construction
• Factory installed temperature and pressure
relief valve – side location
• Piezo ignition – easy light pilot, no matches
required
CONNECTIONS
CONNECTIONS
RELIEF
VALVE
GAS CONTROL
(THERMOSTAT)
Gas Tank-Type
•F
65 gallons for 40-gallon model
•R
depending on model
Warranty
arranty*
information
Longer Life
•P
tank protection
44
LEED Point = 1
DESCRIPTION
FEATURES
ENERGY INFO.
T
ESTIMATED
GAS INPUT IN
RECOVERY IN
FIRST HOUR
Y
TANK
VENT
SHIP.
YEARLY
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
P GAL.MODEL
DIAM. HT. SIZEWATER
WT. ENERGY
ENERGY
E CAP. NUMBER
NAT.
LP
NAT.
LP
NAT.
A
B
C
CONNECTION
(LBS)
FACTOR
COST
Tall
40 MV40FDVX3
36
30
36.4
30.3
65
19-3/4
60-1/2
5
3/4
155
0.62
$263 Nat
Tall
50 MV50FDVX3
36
32
36.4
32.3
80
21-3/4
59-5/8
5
3/4
165
0.60 $272 Nat
rocedures.
FRONT VIEW
Roof Jack
(Purchased Separately)
ADJUSTABLE TILT
ROOF FLANGE
Co-Axial Roof Jack Sizing Table
34° MAX. (8 – 12 PITCH)
ROOF JACK
KIT PART NO.
ROOF JACK
ADJUSTMENT
RANGE (SEE X)
AP14363A
24 - 37"
AP14363B
33 - 68"
AP14363C
45 - 97"
AP14363D
60 - 130"
AP14363E
72 - 160"
NOTE: 42° Max. adjustment roof jacks available. Roof Jacks
must be ordered separately with this direct vent water heater
and installed in accordance with the instructions furnished with
the heater. No other roof jack or vertical vent kit is approved for
installation with this heater.
Roof Jack
Adjustment Range
X
C
34° MAX.
(8 - 12 PITCH)
12"
Min
A
42° MAX. TILT IS
AVAILABLE WITH
OPTIONAL KIT
(10-3/4 - 12 PITCH)
B
45
Powered Damper Ultra Low NOx
Efficiency
• .68 EF
•E
NERGY STAR® rated
Performance
•E
and service
Low Emissions
•U
ltra low NOx 36,000 Btu/h burner
•M
• SCAQMD Rule 1121 compliant
Technology
•2
Longer Life
•P
tank protection
build-up, on 12 and 9-year models
Warranty
•1
2, 9 and 6-Year limited tank and parts
• Certified to 10,200 ft. above sea level
Plus…
sers c
ontrol over
app to the h
omeowner
heating
• Enhanced-flow brass drain valve on 12-year
models
information
†
sold separately
Gas Tank-Type
•F
71 gallons for 40-gallon
•R
ecovery: 36.4 GPH at a 90° F rise
• Exclusive air/fuel shut-off device
LEED Point = 1
46
DESCRIPTION
FEATURES
T
Y
GAS INPUT IN
RECOVERY IN
FIRST HOUR
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
NAT.
NAT.
A
B
C
HT. TO
GAS
VENT CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
ENERGY INFO.
HT. TO
ESTIMATED
SIDE
WATER
SHIP.
YEARLY
T&P
CONN.
WT.
ENERGY
ENERGY
G
H
(LBS) FACTOR
COST
WARRANTY
YEARS
Tall 40 H 12G40-36NE2
36
36.4
71
65
60
21
17-3/8 3 or 4
8
54
3/4
150
0.68
$240
12
Tall 50 H 12G50-36NE2
36
36.4
93
64-3/4
59-3/4
23
17-3/8 3 or 4
8
53-3/4
3/4
180
0.68
$240
12
Tall 40 H 9G40-36NE2
36
36.4
71
65
60
21
17-3/8 3 or 4
8
54
3/4
150
0.68
$240
9
36
36.4
93
64-3/4
59-3/4
23
17-3/8 3 or 4
8
53-3/4
3/4
180
0.68
$240
9
36
36.4
71
65
60
21
17-3/8 3 or 4
8
54
3/4
150
0.68
$240
6
36
36.4
93
64-3/4
59-3/4
23
17-3/8 3 or 4
8
53-3/4
3/4
180
0.68
$240
6
rocedures.
ANODE ROD
H
H
HOT
WATER
CONNECTION
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
A B
1/2"
G
D
47
Atmospheric Ultra Low NOx
Efficiency
• .59 - .63 EF
•M
ore hot water at a low operating cost
Performance
•E
xclusive air/fuel shut-off device for double
protection
Low Emissions
•U
ltra Low NOx radiant burner design
•S
tainless steel construction
Self-Cleaning
build-up
• Reduces fuel costs
• Provides more hot water
• No matches required
Longer Life
tank protection
• All models certified up to 5,999 ft. above sea
level
• 38-Gallon short model certified up to 8,400 ft.
above sea level
LEED Point = 1
FLUE
ANODE ROD
H
H
HOT
WATER
CONNECTION
Plus…
• Enhanced-flow brass drain valve on 12-year
models
•Specially formulated glass lining prevents
Gas Tank-Type
•F
HR: 53 - 104 gallons for natural gas
•R
ecovery: 30.3 to 45.5 GPH at a 90° rise,
depending on model
Easy to Light
F
E
COLD
WATER
CONNECTION
3/4" N.P.T.
RELIEF
VALVE
OPENING
C
Warranty
A B
• 12, 9 and 6-Year limited tank and parts
1/2"
information
G
D
48
DESCRIPTION
FEATURES
T
Y
GAS INPUT IN
RECOVERY IN
FIRST HOUR
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
VENT
HT.
DIAM.
E CAP. NUMBER
NAT.
NAT.
NAT.
A
B
C
19
HT. TO
GAS
VENT CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
ENERGY INFO.
HT. TO
ESTIMATED
SIDE
WATER
SHIP.
YEARLY
T&P
CONN.
WT.
ENERGY
ENERGY
G
H
(LBS) FACTOR
COST
WARRANTY
YEARS
Tall
38
12G40-38FN3
38
38.4
72
60-1/2
57-3/4
17-1/2 3 or 4
8
51-3/4
3/4
141
0.62
$263
12
Tall
48
12G50-40FN3
40
40.4
91
60-5/8
57-7/8 20-1/2 17-1/2 3 or 4
8
51-3/4
3/4
163
0.60
$272
12
Tall
55
1255-45FN
45
45.5
104 60-3/4
57-1/2 23-3/4 17-1/2
8
50-3/4
3/4
182
0.59
$277
12
Tall
38
9G40-38FN3
38
38.4
72
60-1/2
57-3/4
17-1/2 3 or 4
8
51-3/4
3/4
141
0.62
$263
9
Tall
48
9G50-40FN3
40
40.4
91
60-5/8
57-7/8 20-1/2 17-1/2 3 or 4
8
51-3/4
3/4
163
0.60
$272
9
19
Short 38
9G40S-36FN3
36
36.4
68
51-7/8
49-1/8
17-1/2 3 or 4
8
43
3/4
150
0.62
$263
9
Tall
6G30-30FN3
30
30.3
53
58-7/8
56-1/8 16-1/2 17-1/2 3 or 4
8
50-1/8
3/4
114
0.63
$259
6
28
21
4
Tall
38
6G40-38FN3
38
38.4
72
60-1/2
57-3/4
17-1/2 3 or 4
8
51-3/4
3/4
141
0.62
$263
6
Tall
48
6G50-40FN3
40
40.4
91
60-5/8
57-7/8 20-1/2 17-1/2 3 or 4
8
51-3/4
3/4
163
0.60
$272
6
Tall
55
6G55-45FN
45
45.5
104 60-3/4
57-1/2 23-3/4 17-1/2
8
50-3/4
3/4
182
0.59
$277
6
6G40S-36FN3
36
36.4
68
51-7/8
49-1/8
8
43
3/4
150
0.62
$263
6
Short 38
19
21
4
17-1/2 3 or 4
rocedures.
49
Heavy Duty Ultra Low NOx
Performance
•R
allons of hot water
in the first hour for 75-gallon models and 115
gallons for 98-gallon models)**
•A
ll models are certified for a
pplications up to
8,500 feet above sea level
• Integrated self diagnostic system control for
easy installation and service
• Eco-friendly burner, ultra low NOx design meets
14 ng/J NOx requirements
tank protection
applications
• Standard 110-volt electrical c
onnection
• Durable silcon nitride igniter – Hot Surface
Ignition (HSI)
including C
Code c ompliant. C
pressure.
Gas Tank-Type
•D
flammable vapors
•M
Plus…
Warranty
arranty*
information
50
DESCRIPTION
FEATURES
T
Y
GAS INPUT IN
RECOVERY IN
HT. TO
TANK
P GAL. MODEL
THOUS. BTU/H G.P.H. 100° RISE**
VENT
HT.
DIAM.
E CAP.NUMBER
NAT.
NAT.
A
B
C
HT. TO
GAS
VENT
CONN.
SIZE
D
E
WATER
CONN.
CNTR.
F
HT. TO
SIDE T&P
VALVE
G
WATER
FRONT
CONN.
TO
SHIP.
SIZEBACK WT.
H
I
(LBS)
Tall756G75-75UF
75.1
72.8
64-1/8
60-1/4
26-1/4
14-1/4
4
11
52-1/4
1
33-3/4
300
Tall 98 5V100UF
75.1
72.8
67-7/8
64
27-1/8
14-1/4
4
11
56-1/8
1
34-3/4
370
F
E
H
C
A B
G
SIDE
TAPS
3/4" N.P.T
HOT
WATER
CONNECTION
H
COLD
WATER
CONNECTION
I
D
51
Power Vent Ultra Low NOx
Efficiency
Performance
Longer Life
• .67 EF
•E
NERGY STAR® rated
•M
ore hot water at a low operating cost
•E
xclusive air/fuel shut-off device for double
protection
Low Emissions
tank protection
Gas Tank-Type
•F
HR: 72 - 94 gallons for natural gas
•R
depending on model
• Certified to 5,999 ft. above sea level
Plus…
• Whisper quiet blower
• Durable spark-to-pilot ignitor
Warranty
•U
ltra Low NOx radiant burner design
•S
tainless steel construction
arranty*
information
Self-Cleaning
build-up
• Reduces fuel costs
• Provides more hot water
LEED Point = 1
DESCRIPTION
FEATURES
52
T
Y
GAS INPUT IN
RECOVERY IN
FIRST HOUR
P GAL. MODEL
THOUS. BTU/H
G.P.H. 90° RISE
DEL. G.P.H.
E CAP.NUMBER
NAT.
NAT.
NAT.
HT. TO
TOP OF
TANK
ASSEMBLY
HT.
DIAM.
A
B
C
HT. TO
GAS
CONN.
D
WATER
CONN.
CNTR.
E
HT. TO
SIDE T&P
VALVE
F
ENERGY INFO.
WATER
ESTIMATED
CONN.
SHIP.
ENERGY YEARLY
SIZE
WT. FACTORENERGY
G
(LBS)
NAT.
COST
Tall 40 H 6G40PV-36FN
36
36.4
72
69-3/460 21 17-3/8 8
Tall 50 H 6G50PV-38FN
38
38.4
94
69-1/2
59-3/42317-3/8853-3/43/4 200 0.67 $244
54 3/4 170
0.67 $244
rocedures.
NUMBER OF
90° ELBOWS
NUMBER
ELBOWS
MINIMUM PIPE LENGTH
REQ. (FT.)
MAXIMUM
PIPE
LENGTH
(FT.)
NUMBER OF
90° ELBOWS
NUMBER
ELBOWS
MINIMUM PIPE LENGTH
REQ. (FT.)
MAXIMUM
PIPE
LENGTH
(FT.)
One (1)
None
3.0
44.0
One (1)
None
3.0
95.0
One (1)
One (1)
3.0
41.0
One (1)
One (1)
3.0
92.5
Two (2)
None
3.0
38.0
Two (2)
None
3.0
90.0
Two (2)
One (1)
3.0
35.0
Two (2)
One (1)
3.0
87.5
Three (3)
None
3.0
32.0
For the 2” vent, one 90° elbow is approximately equal to 6 feet of pipe.
One 45° elbow is approximately equal to 3 feet of pipe.
Three (3)
None
3.0
85.0
Three (3)
One (1)
3.0
82.5
Four (4)
None
3.0
80.0
NOTICE: The mixing of 2” and 3” vent pipe is not recommended. If 3” pipe is used,
a 2” to 3” reducer fitting is recommended at the rubber coupling.
Four (4)
One (1)
3.0
77.5
Five (5)
None
3.0
75.0
This water heater is supplied with a 2” Schedule 40 PVC 45° vent t erminal.
When venting with 3” pipe, a Schedule 40 PVC 45° vent terminal must be used.
Screens for both 2” and 3” vent terminals have been included.
For the 3” vent, one 90° elbow is approximately equal to 5 feet of pipe.
One 45° elbow is approximately equal to 2.5 feet of pipe.
POWER VENT
ASSEMBLY
ANODE ROD
G
G
HOT
WATER
CONNECTION
E
COLD
WATER
CONNECTION
T&P FITTING
3/4" N.P.T.
C
A B
F
1/2"
D
53
Encore® High Efficiency Condensing Tankless
Efficiency
• .92 - .94 EF with stainless steel condensing heat
exchanger
•E
NERGY STAR® rated
• Intelligent electronic controls designed to increase
energy efficiency and safety
•T
hird party efficiency listed by AHRI
• Industry First! 0.26 GPM minimum flow rate,
0.40 GPM minimum activation flow rate
•S
CAQMD rule 1146.2 compliant
•R
MTGH-95 for 3 bathroom homes*– 9.5 gal./
min. at 35°F rise max., 8.4 gal./min. at 45°F rise
•R
MTGH-84 for 2-3 bathroom homes*– 8.4 gal./
*Based on simultaneous showers using 2.5 gallons per
minute. Flow rates vary depending on temperature of cold
water supply.
Compact Size
•C
ompact space saving design – about the size
of a medicine cabinet
• Self-diagnostic system for easy installation and service
• Digital display shows temperature setting and
maintenance codes
Technology
• Two-pipe direct vent system designed for PVC
pipe (up to 38 ft. of 3” PVC Pipe or 5 ft. of 2”
PVC Pipe). See instructions for details
• Hot start programming helps m
inimize fl uctuation
in water temperature, referred to as “cold water
sandwich,” during periods of frequent on/off
operation
• Built-in electric blower
• Exclusive! Guardian OFW™ overheat film wrap
• EZ-Link™ cable available for higher demand
applications to connect two tankless units to
operate as one
• Manifold up to six units with an o
ptional MIC-6
manifold control board
• Manifold up to 20 units with the optional
MIC-185 plus the MICS-180 manifold control
assembly
Indoor Direct Vent
• High-altitude capability – up to 9,840 ft.
elevation above sea level
Plus…
• Digital remote control and 10 ft. of thermostat
wire included
• Supplied with a 120 volt power cord
(indoor models only)
• Freeze protection to -30°F
• Required manual gas isolation valve included
Tankless Gas
Performance
Warranty
• 12-Year limited heat exchanger, 5-year limited
parts warranty*
arranty*
• 1-Year labor w
information
Outdoor
LEED Points = 2
DESCRIPTION
FEATURES
54
ENERGY INFO.
ESTIMATED
MIN. FLOW/ GPM @
GPM @
SHIP.
YEARLY
CONNECTION
MODEL INPUT
TEMP.
ACTIVATION 77° RISE 45° RISE MAX.
VENT
WEIGHT
ENERGY
RECOVERY ENERGY COST
NUMBER
BTU/H
TYPE
RANGE
GPM
MAX.
MAX.
GPM WATER GAS HEIGHT WIDTH DEPTH
DIAM.
(LBS.) FACTOR EFFICIENCY
NAT/LP
H RMTGH-95DVLN
11,000-
199,900
H RMTGH-95XLN
Indoor
Direct Vent
85° to
0.26/0.40
4.9
8.4
9.5
3/4
3/4 27-1/2 18-1/2 9-3/4 2” or 3”
140° F
PVC 2-Pipe
82
.94
94%
$174/$421
11,000-
Outdoor
199,900
85° to
0.26/0.40
4.9
8.4
9.5
3/4
3/4 27-1/2 18-1/2
140° F
82
.94
94%
$174/$421
H RMTGH-84DVLN
11,000-
157,000
85° to
0.26/0.40
3.9
6.6
8.4
3/4
3/4 27-1/2 18-1/2 9-3/4 2” or 3”
140° F
PVC 2-Pipe
82
.92
92%
$178/$430
H RMTGH-84XLN
11,000-
Outdoor
157,000
85° to
0.26/0.40
3.9
6.6
8.4
3/4
3/4 27-1/2 18-1/2
140° F
82
.92
92%
$178/$430
Indoor
Direct Vent
9-3/4
9-3/4
N/A
N/A
rocedures.
All models are available in Natural Gas and Propane (LP). For Propane replace “N” with “P” in model number. Example RMTGH-95DVLP.
• SCAQMD 1146.2 compliant.
• Factory set maximum temperature is 120° F. See Use and Care Manual for setting.
• Consult factory for information on sizing the application.
Vent Termination Kits are required for Direct Vent models. Contact your distributor for details.
Proper gas pressure must be ensured to supply tankless gas water heaters – up to 199,900 Btu/h for RMTGH-95 models, up to 180,000 Btu/h for RMTGH-90 models
and up to 157,000 Btu/h for RMTGH-84 models. (Consult your gas supplier)
• Approved for use with Centroitherm Polypropylene venting (U.S. and Canada).
55
Essential Plus Mid-Efficiency Tankless Ultra Low NOx
Efficiency
Technology
• .82 EF
• Intelligent electronic controls designed to
increase energy efficiency and safety
•T
hird party efficiency listed by AHRI
Performance
*Based on simultaneous showers using 2.5 gallons per
minute. Flow rates vary depending on temperature of
cold water supply.
•S
elf-diagnostic system for easy installation and
service
• Digital display shows temperature s etting and
maintenance codes
• 3”/5” concentric vent system with Integrated
condensate collector
• Hot start programming helps m
inimize
fluctuation in water temperature, referred to
as “cold water sandwich”, during periods of
frequent on/off operation
• Connects to Metal Fab. Inc., 3”/5” concentric
venting without an adapter
• Built-in electric blower
• Exclusive! Guardian OFW™ overheat film wrap
• EZ-Link™ cable available for higher demand
applications to connect two tankless units to
operate as one
• Manifold up to six units with an optional MIC-6
manifold control board
• Manifold up to 20 units with the optional
MIC-185 plus the MICS-180 manifold control
assembly
• High-altitude capability – up to 9,840 ft.
elevation above sea level
Plus…
• Digital remote control and 10 ft. of thermostat
wire included
• Supplied with a 120 volt power cord
(indoor models only)
• Freeze protection to -30°F
Tankless Gas
• Industry First! 0.26 GPM minimum flow rate,
0.40 GPM minimum activation flow rate
• RMTG-95 for 3 bathroom homes*– 9.5 gal./min.
at 35°F rise max., 8.4 gal./min. at 45°F rise
• RMTG-84 for 2-3 bathroom homes*– 8.4 gal./
• RMTG-64 for 1-2 bathroom homes*– 6.4 gal./
Indoor Direct Vent
Warranty
• 12-Year limited heat exchanger, 5-year limited
parts warranty*
arranty*
• 1-Year labor w
information
Low Emissions
• Environmentally friendly Ultra Low NOx burner
meets SCAQMD rule 1146.2 requirements
Outdoor
LEED Points = 2
DESCRIPTION
FEATURES
56
ENERGY INFO.
ESTIMATED
MIN. FLOW/ GPM @
GPM @
SHIP.
YEARLY
CONNECTION
MODEL INPUT
TEMP.
ACTIVATION 77° RISE 45° RISE MAX.
VENT
WEIGHT
ENERGY
RECOVERY ENERGY COST
NUMBER
BTU/H
TYPE
RANGE
GPM
MAX.
MAX.
GPM WATER GAS HEIGHT WIDTH DEPTH
DIAM.
(LBS.) FACTOR EFFICIENCY
NAT/LP
RMTG-95DVLN
11,000-
199,900
RMTG-95XLN
Indoor
Direct Vent
54
.82
84%
$199/$482
11,000-
Outdoor
85° to
0.26/0.40
4.3
7.4
9.5
3/4
3/4 23-5/8 13-7/8 8-7/8
N/A
199,900 140° F
54
.82
83%
$199/$482
RMTG-84DVLN
11,000-
180,000
54
.82
84%
$199/$482
RMTG-84XLN
11,000-
Outdoor
85° to
0.26/0.40
3.9
6.7
8.4
3/4
3/4 23-5/8 13-7/8 8-7/8
N/A
54
180,000 140° F
.82
83%
$199/$482
RMTG-64DVLN
11,000-
150,000
54
.82
84%
$199/$482
RMTG-64XLN
11,000-
Outdoor
85° to
0.26/0.40
3.3
5.6
6.4
3/4
3/4 23-5/8 13-7/8 8-7/8
N/A
150,000 140° F
54
.82
83%
$199/$482
Indoor
Direct Vent
Indoor
Direct Vent
85° to
0.26/0.40
4.3
7.4
9.5
3/4
3/4 25-5/8 13-7/8 9-7/8
3 by 5
140° F
Concentric
85° to
0.26/0.40
3.9
6.7
8.4
3/4
3/4 25-5/8 13-7/8 9-7/8
3 by 5
140° F
Concentric
85° to
0.26/0.40
3.3
5.6
6.4
3/4
3/4 25-5/8 13-7/8 9-7/8
3 by 5
140° F
Concentric
rocedures.
All models are available in Natural Gas and Propane (LP). For Propane replace “N” with “P” in model number. Example RMTG-95DVLP.
• SCAQMD 1146.2 compliant.
• Factory set maximum temperature is 120° F. See Use and Care Manual for setting.
• Consult factory for information on sizing the application.
Vent Termination Kits are required for Direct Vent models. Contact your distributor for details.
Proper gas pressure must be ensured to supply tankless gas water heaters – up to 199,900 Btu/h for RMTG-95 models, up to 180,000 Btu/h for RMTG-84 models and up to 150,000 Btu/h
for RMTG-64 models. (Consult your gas supplier)
57
Encore® Hybrid Heat Pump
Efficiency
Operation Modes
•H
igh 2.45 EF reduces operating cost $340
annually compared to a s tandard 50-gallon
electric model
• ENERGY STAR® rated
• Energy Saver
• Heat Pump Only
• High Demand
• Electric Heat Only
•V
acation: 2-28 days (or placed on hold indefinitely)
• D
elivers hot water faster than most standard
electric water heaters – 73 gallons first-hour
delivery for 50-gallon model and 86 gallons
FHD for 80-gallon model
•8
700 Btu/h compressor – the most powerful in
its class for quick recovery of hot water
•A
mbient operating range: 37-120° F is widest
in class, offering more days of HP operation
annually; designed to meet Northern Climate
Spec (Tier 1)
Easy Installation
•E
asy access side connections
•Q
uick access to electrical junction box
•E
asily replaces a standard electric water heater
Integration
• LCD
Screen with built-in water sensor alert with
audible alarm and service notifications
DESCRIPTION
Plus…
sers c
ontrol over
app to the h
omeowner
• Premium grade anode rod with resistor extends
the life of the tank
• 3/4” NPT water inlet and outlet;
3/8” condensate drain connections
• Incoloy stainless steel resistor elements
• Dry-fire protection
• Easy access, top mounted washable air filter
• 2-1/2” Non-CFC foam insulation
• Enhanced flow brass drain valve
FEATURES
Warranty
• 12-Year limited tank and component parts
warranty, 2-year limited labor warranty
information
†
sold separately
Electric Tank-Type
Performance
•T
emperature and pressure relief valve included
58
LEED Points = 3
ENERGY INFO.
T
ESTIMATED
Y
FIRST HOUR
RECOVERY
APPROX.
YEARLY
P GAL. MODEL
COMPRESSOR
RATING
IN G.P.H. HEIGHT
DIAMETER
UNIT
SHIP WT.
ENERGY
ENERGY
E CAP. NUMBER
BTU/H
G.P.H.
90° F RISE
A
B
WT. (LBS)
(LBS) SAVER
COST
Tall 50 H 12E50-HP
8700
73
26
61
22-1/4
185
198
2.45 EF
$215
Tall 80 H 12E80-HP
8700
86
26
74-1/2
24-1/4
230
271
2.45 EF
$215
Estimated energy cost based on a national average fuel rate electricity 12.00¢/kWh. Energy factor determined by the U.S. Department of Energy (DOE) test procedures.
B
A
26.17
59
Encore®
Efficiency
• .94 - .95 EF
• Isolated tank design reduces conductive
heat loss
• D
ual 5500 watt stainless steel heating elements
•F
HR: 58 - 68 gallons based on gallon capacity
• Recovery:
up to 25 GPH at a 90° F rise
Super Sentinel Diagnostic System
•S
imple easy to read diagnostics
•C
ontrols multiple operating modes
•D
igital thermostat setting
•B
uilt-in water sensor alert with audible alarm
and service notifications
Features
• High performance and lower operating cost
•C
ompliant with many electric utility incentive
programs
•P
tank protection
•E
lectric junction box located above heating
elements for easy installation
•O
ver-temperature protector cuts off power in
excess temperature s ituations
DESCRIPTION
sers c
ontrol over
app to the h
omeowner
• EverKleen™ self cleaning device fights harmful
sediment build-up with a high-velocity spiraling
water stream – helps operating e
fficiency by
saving energy, money and improving tank life
Electric Tank-Type
Performance
Plus…
Warranty
arranty*
information
†
sold separately
LEED Point = 1
FEATURES
60
ENERGY INFO.
T
ESTIMATED
Y
FIRST HOUR
RECOVERY
TANK
HEIGHT TO
APPROX.
YEARLY
P GAL. MODEL
RATING
IN G.P.H. HEIGHT
WATER CONN.
DIAMETER
SHIP WT.
ENERGY
ENERGY
E CAP. NUMBER
G.P.H.
90° F RISE
A
B
C
(LBS) FACTOR
COST
Tall
50
12E50-DEC
68 25 58-3/8
61-5/820-1/41210.95$555
Tall
55
12E55-DEC
71 21
Med.
40
12EM40-DEC
55 21 48-1/4
50-1/220-1/41060.95 $555
Med.
50
12EM50-DEC
65 21
57 59-3/422-1/41280.94$561
48 50-1/222-1/41320.95$555
Super Sentinel not available on single e
lement models, available on dual element models only. Super Sentinel not a
vailable in excess of 5 kW on 208 V models.
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
**Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W
= 21 GPH
2.42 x 90°
8"
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
RELIEF VALVE
CONNECTION
C
**Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.
ANODE
ROD
DIAMETER
A
B
WATER CONNECTIONS ALL 3/4" N.P.T.
61
Essential Plus
Efficiency
• .95 EF
heat loss
• Dual 4500 watt elements, stainless steel lower
element for longer life
•F
HR: 44 - 71 gallons, based on gallon capacity
•R
ecovery: 21 GPH at a 90° F rise
System Sentinel
•E
xclusive diagnostic system with glowing LEDs
that verify heating element operation. LEDs pin
point the exact location of functioning or nonfunctioning heating elements
Features
•H
igh performance and lower operating cost
•C
ompliant with many electric utility incentive
programs
•P
tank protection
•E
Plus…
fficiency by
Electric Tank-Type
Performance
• Over-temperature protector cuts off power in
excess temperature situations
• Automatic thermostat keeps water at desired
temperature
Warranty
arranty*
information
LEED Point = 1
DESCRIPTION
FEATURES
62
ENERGY INFO.
T
ESTIMATED
Y
FIRST HOUR
RECOVERY
TANK
HEIGHT TO
APPROX.
YEARLY
P GAL. MODEL
RATING
IN G.P.H. HEIGHT
WATER CONN.
DIAMETER
SHIP WT.
ENERGY
ENERGY
E CAP. NUMBER
G.P.H.
90° F RISE
A
B
C
(LBS) FACTOR
COST
Tall
50
9E50-DEL
67 21 58-5/8
61-5/820-3/81210.95 $555
Med.
40
9EM40-DEL
55 21 48-1/4
50-1/220-1/41060.95 $555
Med. 50
65
9EM50-DEL
21
48
50-1/2
23
132
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specificallyrequested.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
• All models equipped with heat traps.
Example: 4500W
= 21 GPH
2.42 x 90°
0.95
$555
8"
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
RELIEF VALVE
CONNECTION
C
ANODE
ROD
DIAMETER
A
B
63
Essential
Efficiency
• .95 EF
heat loss
• 4500 Watt resistored copper elements to
prolong anode rod and tank life
•F
HR: 42 - 71 gallons, based on gallon capacity
•R
Longer Life
•P
tank protection
Features
•E
•O
•A
utomatic thermostat keeps water at desired
temperature
fficiency by
Ask about
LEED Points
8"
Electric Tank-Type
Performance
Plus…
Warranty
arranty*
information
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
RELIEF VALVE
CONNECTION
C
ANODE
ROD
DIAMETER
A
B
DESCRIPTION
GAL. MODEL
TYPE CAP. NUMBER
Tall 30 6E30-D
Tall 40 6E40-D
Tall 50 6E50-D
Med. 30 6EM30-D
Med. 40 6EM40-D
Med. 50 6EM50-D
Short 28 6ES30-D
Short
30
6ESB30-2**
Short 36 6ES40-D
Short 38 6ESB40-2**
Short 47 6ESB50-2**
FEATURES
FIRST HOUR
RATING
G.P.H.
RECOVERY
IN G.P.H. 90° F RISE
48
57
67
44
55
65
42
42
45
45
55
TANK
HEIGHT
A
HEIGHT TO
WATER CONN.
DIAMETER
B
C
21
47-1/2
50-3/8
21
60-3/4
63-5/8
21
58-5/8
61-5/8
21
37-1/2
40-1/2
21
48-3/8
50-1/2
21
48
50-1/2
21
30
31-1/8
21 30-1/832
21
31-1/2
33
21
31-1/2
32-5/8
21
32
32
64
ENERGY INFO.
APPROX.
SHIP WT.
ENERGY
(LBS) FACTOR
ESTIMATED
YEARLY
ENERGY COST
19-3/4
920.95$555
19-1/4
109
0.95
$555
20-3/8
121
0.95
$555
20-1/4
92
0.95
$555
20-1/4
106
0.95
$555
23
132
0.95
$555
23
95
0.95
$555
19-3/4950.95
$555
24-1/4
118
0.95
$555
23
108
0.95
$555
26-1/4
149
0.95
$555
**Water heater dimensions prior to installing insulation blanket that is included with water heater
• Single element models available on special order (6000W max.). Substitute “1” for “2” in model number.
• All models equipped with heat traps.
Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W
= 21 GPH
2.42 x 90°
Recovery calculations used are based on 4500 watt elements used in non-simultaneous operation.
65
Essential Point-of-Use
Efficiency
• .95 EF for 30-gallon model
•O
Features
arranty*
information
Electric Tank-Type
•H
igh efficiency single 2000 watt resistored
heating element, except 6EP30-D which has
dual 4500 watt elements
•A
utomatic thermostat keeps water at desired
temperature
•W
all bracket for easy wall mount installations
and corrosion resistant 1/4 turn drain valve
included with 2.5 gallon model
Warranty
2.5-Gallon
Plus…
• Temperature and pressure relief valve
•S
pecially formulated glass lining prevents
•M
eets or exceeds National Appliance Energy
Conservation Act (NAECA) requirements
•T
hese units are U.L. listed and c
omply with
Underwriter’s Laboratories S
pecifications 174
• Enhanced-flow brass drain valve on
2.5-gallon model
DESCRIPTION
6, 10, 15, 19.9
and 30-Gallon
FEATURES
GAL.
HEIGHT
CAP.
MODEL NUMBER
A
HT. TO HOT
WATER OUTLET
DIAMETER
B
C
HT. TO SIDE
T&P VALVE
D
HT. TO COLD
WATER INLET
E
ENERGY INFO.
APPROX.
SHIP WT.
ENERGY
(LBS.)
FACTOR
ESTIMATED
YEARLY
ENERGY COST
2.5 6EP2-1
14
14
9-3/4
–
–
22
–
–
6 6EP6-1
15-1/4
12-1/2
15-3/4
11-1/2
4-1/4
36
–
–
10 6EP10-1
23
20-1/2
15-3/4
19-1/2
4-1/4
46
–
–
15 6EP15-1
24-1/4
22
17-3/4
21
4-1/2
54
–
–
19.9 6EP20-1
25-1/4
22-3/4
19-3/4
21-3/4
5
69
–
–
30 6EP30-S
31-7/8
23-1/8
22-1/4
23
3
91
0.95
$555
30 6EP30-D
31-7/8
23-1/8
22-1/4
23
3
91
0.95
$555
Estimated energy cost based on a national average fuel rate electricity 12.00¢/kWh.
Energy factor determined by the U.S. Department of Energy (DOE) test procedures.
Not available in 120 volt. Available with 2-wire (single phase) outlet only. (6000 watt max.).
• 2.5 gallon model: 1⁄2” N.P.T. inlet and outlet. Relief valve connection 3⁄4”.
Available with 120 or 240 volt AC single phase only, 120v (1440w) 240v (1500w)
Power cord supplied with 120 volt models only.
• 6 through 30 gallon models: 3⁄4” N.P.T. outlet, inlet, anode rod. T & P valve connections. Not available with 3 phase wiring.
Water heaters furnished standard with 120 volt AC, 2000 watt single element.
Special wiring options – a limited number of wiring options are available. Consult factory for price and availability.
CONSTRUCTION DETAILS: The cold water enters the tank a few inches from the bottom. Both hot and cold water lines may be
connected directly to the water heater without special nipples or tees. The relief valve simply screws into the opening provided.
66
3-1/2"
HOT WATER
CONNECTION
COLD WATER
CONNECTION
ANODE
ROD
HOT
WATER
OUTLET
RELIEF VALVE
CONNECTION
C
RELIEF VALVE
DIAMETER
A BD
A
B
C
COLD
WATER
INLET
E
RELIEF VALVE CONNECTIONS 3/4" N.P.T.
2-1/2 GALLON MODEL
6, 10, 15, 19.9 AND
30 GALLON MODELS
67
Essential for Manufactured Housing
Efficiency
•O
• Automatic thermostat keeps water at desired
temperature
• .95 EF
heat loss
• Dual 4500 watt heating elements for faster
recovery
Plus…
•F
HR: Up to 54 gallons, based on model
•R
ecovery: 17 GPH for 3500 watts and 21 GPH
for 4500 watts at a 90° F rise**
Longer Life
•P
tank protection
Features
•H
igh performance and lower operating cost
•C
ompliant with H.U.D., ASHRAE 90A-80 and
NAECA requirements
•S
ingle and double element models available.
High efficiency resistored heating element in
single element models.
•E
odular
construction
fficiency by
Electric Tank-Type
Performance
Warranty
arranty*
information
LEED Point = 1
DESCRIPTION
T
Y
P GAL.MODEL
E CAP.NUMBER
FEATURES
FIRST HOUR
RATING G.P.H.
3500 WATTS
4500 WATTS
RECOVERY
3500 WATTS
68
4500 WATTS
TANK
HEIGHT
A
HEIGHT TO
WATER CONN.
DIAMETER
B
C
ENERGY INFO.
APPROX.
SHIP WT.
ENERGY
(LBS) FACTOR
ESTIMATED
YEARLY
ENERGY COST
Tall
30
T2V30-D
2546 1721
47-3/4
39-1/2
19-1/492 0.95 $555
Tall
40
T2V40-D
3050 1721
48-1/2
40-1/8
21-1/8
106 0.95 $555
•Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 3500 watt or 4500 watt heating elements.
Example: 4500W
= 21 GPH
2.42 x 90°
RELIEF
VALVE
C
HOT
OUTLET
DOUBLE
ELEMENT
AVAILABLE
ON 30, 40
& 50 GAL.
ONLY
A B
ANODE
JUNCTION
BOX
COLD
INLET
3"
COLD
OUTLET
HOT
OUTLET
69
Essential Table Top
Table Top Features
Easy Installation & Service
•B
aked enamel counter top is acid and heat
resistant
•F
our inch high backsplash protects interior wall
from spills and stains
•R
ecessed base provides comfortable standing
area while working
•C
hannel at rear accommodates piping and
permits water heater to fit snugly against
back wall
• Table top surface is easily removed for
access to cold and hot water outlets at top
of tank, electrical connections and anode rod
replacement
• Patented magnesium anode rod with resistor
protects the tank from rust
Plus…
• Durable direct immersion resistored heating
element
Efficiency
• .88 EF
•W
ell insulated for reduced standby heat loss
Performance
Warranty
•F
HR: 45 gallons
•R
arranty*
Capacity & Dimensions
information
•4
0 Gallon model: 24 inch diameter:
25 inch depth and 36 inches high
DESCRIPTION
GAL.
MODEL
CAP.
NUMBER
40
8TV40-2
Electric Tank-Type
Longer Life
FEATURES
FIRST HOUR
RATING
G.P.H.
RECOVERY
IN G.P.H. HEIGHT
90° F RISE
A
70
HEIGHT TO
WATER CONN.
DIAMETER
DEPTH
B
C
D
ENERGY INFO.
APPROX.
SHIP WT.
ENERGY
(LBS) FACTOR
ESTIMATED
YEARLY
ENERGY COST
4521363324251560.88
$599
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be s
pecifically requested.
4"
C
ANODE
ROD
RELIEF
VALVE
4"
4"
COLD
A
HOT
D
C
71
Essential Tankless
Features
Efficiency
•M
odulating heat exchanger improves energy
efficiency
•N
o standby heat loss aids in energy
consumption
•N
o venting needed – eliminates greenhouse
gases
Easy Installation
•C
omplete install without removing
the cover
•E
asy water connections using
1/2-inch compression fittings
• Lightweight
Space Savings
RMTE 3 and RMTE 7
• No T&P valve required
• Compact size - fits
almost anywhere
• Ideal for fast, continuous hot water at a
single point-of-use faucet or other fixture
• RMTE 3 (3kW/120V) requires a d
edicated
30 AMP breaker
edicated
30 AMP breaker
Applications
• Homes
• Apartments
• Condos
• Hospitals
• Rest rooms
• Restaurants
• Offices
• Laboratories
• Anywhere hot water is needed
Typical Shower
RMTE 9
RMTE 13
RMTE 18
RMTE 27
72
RMTE 9 and RMTE 13
• Ideal for fast, continuous hot water at a
lavatory or sink
edicated
40 AMP breaker
edicated
60 AMP breaker
Warranty
RMTE 18 and RMTE 27
• 10-Year limited heat exchanger and
1-year limited parts w
arranty.*
• Designed for fast, continuous hot water in
a bathroom addition/renovation or single
shower
• RMTE 18 (18kW/240V) requires two
dedicated 40 AMP breakers
• RMTE 27 (27kW/240V) requires two
dedicated 60 AMP breakers
All come with an on-unit temperature control
with LED lights
information
FLOW RATE IN GPM
AT 60 PSI
APPLICATION
RMTE 3
RMTE 7
Tankless Electric
•C
ontinuous hot water on demand
• Industry leading low-flow activation
•E
xternal temperature control
•L
EDs indicate active element and standby
mode
•1
/2-Inch water connections
•R
ugged brass/copper heat exchanger
•P
re-wired 2-foot power supply cord(s) included
ELECTRICAL SPECIFICATIONS
2.0 GPM
MODEL
KW
VOLTS
RECOMMENDED
BREAKER SIZE
MAX POWER
(AMP)
AWG
WIRE
Typical Bath Tub Faucet
2.5 GPM
RMTE 3
3
120
30
29
10
Bathroom Vanity Sink Faucet
1.0 GPM
RMTE 7
7
240
30
29
10
Kitchen Sink Faucet
1.5 GPM
RMTE 9
9
240
40
38
8
Washer
2.0 GPM
RMTE 13
13
240
60
54
6
RMTE 18
18
240
(2) 40
75
(2) 8
RMTE 27
27
240
(2) 60
112
(2) 6
TEMPERATURE RISE AND GPM FLOW
MINIMUM
MAX.
TEMPERATURE RISE CHART (F°)
ACTIVATION FLOW
AND FLOW RATES BY MODEL
MODEL
FLOW RATE
RATE
NUMBER (GPM) (GPM)20°30°40°50°60°
70°80°90°
100°
RMTE 3
0.4
1.5 1.090.730.550.44 –
RMTE 7
0.4
2.5 2.501.591.200.960.800.680.600.530.48
RMTE 9
–
–
–
–
0.4
3 3.002.051.541.231.020.880.770.680.61
RMTE 13 0.4
4 4.002.962.221.781.481.271.110.990.89
RMTE 18 0.4
5 5.004.103.072.462.051.761.541.371.23
RMTE 27 0.4
5 5.005.004.613.693.072.632.312.051.84
DIMENSIONS (INCHES/POUNDS)
MODEL/SKU
HEIGHT WIDTH DEPTHWEIGHT
RMTE 3
10-1/4
5-3/8
3-1/4
6
RMTE 7
10-1/4
5-3/8
3-1/4
6
RMTE 9
10
7-1/4
3-1/4
8
RMTE 13
10
7-1/4
3-1/4
8
RMTE 18
10-1/2
11-1/4
3-1/4
12
RMTE 27
10-1/2
11-1/4
3-1/4
12
• Plumbing connections: 1/2 NPT • Minimum flow rate: 1/2 gal. min
73
SolPak™ Active System with Electric Backup
System
• Closed loop system – glycol design
• Single and double collector systems
•S
ystem includes – Solaraide HE tank, collectors
and pump station
Heat Exchanger Tank
Warranty
• OG-100 certified by SRCC
• Available in three sizes
• Durable low iron tempered glass – improves
efficiency and heat transfer
• Integral mounting channel for easy installation
• Stainless steel fasteners
• Type-M copper riser tubes
• Black paint absorber coating
• 6-Year limited tank, 10-year limited collector
and 6-year limited pump station w
arranty.*
*See Residential and SolPak Warranty
Certificate for complete information
Pump Station
Solar
• 65, 80 and 120-Gallon capacities
• 4500 Watts
• Provides at least 40 gallons of stored hot water
•D
ouble wall, high efficiency solar heat
exchanger includes copper tubing wrapped
around the tank and secured within the jacket
for positive leak protection
•C
ollector feed and return fittings conveniently
located on front of tank for easy installation
• Cold water inlet brings cold water to tank
bottom to prevent mixing with heated water
orrosion and
• Rheemglas® tank lining resists c
prolongs tank life
• T&P Valve included
•A
utomatic temperature control and over heat
protection
Collector
• Pre-engineered assembly of q
uality
components in a neat, compact insulated
enclosure
• Simple, labor saving, attractive solution for
closed loop glycol solar systems
• Includes cast iron three speed pump, advanced
differential controller and b
alancing valve and
flow meter
System Certifications
• OG-300 certification by SRCC
74
SYSTEM INFORMATION
COLLECTOR INFORMATION
WATER HEATER INFO.
STORAGE
SYSTEMSOLAR
NUMBER OF
AREA
DRY
FLUID
DESIGN
MAX
MAX.
APPROX.
CAPACITY MODEL
ENERGY COLLECTOR ABSORBER
WIDTH
LENGTH
DEPTH
SQ. FT. WEIGHT CAPACITY FLOW RATE FLOW RATE OPERATING HEIGHT DIAMETER WEIGHT ELEMENT
(US GAL) NUMBER
FACTOR*
PANELS
COATING
(INCHES) (INCHES) (INCHES) (GROSS)
(LBS)
(US GAL)
(GPM)
(GPM)
PRESSURE (INCHES) (INCHES)
(LBS) WATTAGE
80
RS80-40BP
2.4
1
Black Paint
48-1/8
122-1/4
3-1/4
40.81
141
1.2
1.04
12
160
58-3/4
24-1/2
222
4500 W
80
RS80-48BP
2.6
2
Black Paint
36-1/8
98-1/4
3-1/4
24.61
80
.78
0.62
12
160
58-3/4
24-1/2
222
4500 W
120
RS120-64BP
3.2
2
Black Paint
48-1/8
98-1/4
3-1/4
32.79
106
1.0
0.83
12
160
62
28-1/4
380
4500 W
* As rated by the Solar Rating & Certification Corporation (SRCC)
Get a Federal Tax Credit up to 30% of the cost of equipment and installation with a Solar Water Heater.
Applies to existing or new residential construction. Tax credit a
vailable through Dec. 2016.
See your Tax Advisor for details.
2
HOT
PROPYLENE
GLYCOL
COOL PROPYLENE GLYCOL
HEATED POTABLE WATER
1 Heat Exchanger Tank
2 Collectors
3 Pump Station
3
4
1
4 Thermal Expansion Tank
POTABLE WATER SUPPLY
SOLARAIDE
HE
WATER HEATER
(NOT INCLUDED)
75
Solaraide™ HE Tanks
Features & Benefits
•D
ouble wall heat exchanger includes copper
tubing wrapped around the tank and secured
within the jacket for positive leak protection
•T
wo well insulated models to choose from…
a storage tank or a high efficiency 4500 Watt
backup electric water heater
• Electric backup model provides at least
40-gallons of stored hot water
•C
ollector feed and return fittings conveniently
located on front of tank for easy installation
•A
special 1/2” NPT opening is provided for
installation of a probe type” thermostat
•D
urable brass drain valve for easy maintenance
• Cold water inlet brings cold water to tank
bottom to prevent mixing with heated water
orrosion and
• Rheemglas® tank lining resists c
prolongs tank life
• Anode rod equalizes aggressive action for
prolonged tank life
• Electric backup model has automatic
temperature control and over heat protection
Warranty
Copper Heat Exchanger Coil
Type L Copper 5/8" I.D.
SOLARAIDE HE
TANK CAPACITY
COIL CAPACITY
GALLONS
65 Gallons
2.2
120
80 Gallons
2.2
120
120 Gallons
2.6
143
PRESSURE DROP THROUGH COIL (FEET OF H20)
arranty*
HEAD LOSS (FEET)
FLOW RATE
information
LENGTH OF TUBING
AROUND TANK (FT)
Solar
Easy Installation and M
aintenance
Tank Design & Construction
65 & 80-GALLON
120-GALLON
1 GPM
1.3
1.6
2 GPM
4.8
5.7
3 GPM
10.0
12.0
76
DESCRIPTION
ENERGY INFO.
T
Y P GAL.MODEL
E CAP.NUMBER
ELEMENTAPPROX
WATTAGE
HEIGHT
DIAMETER
SHIP WT.
APPROX.
UPPER
A
B
(LBS) R-FACTOR
Tall
65 82V65HE
4500 W*
59
21
170
R-17.3
Tall
80 81V80HE-1
4500 W*
58-3/4
24-1/2
222
R-17.3
Tall
80 81V80HE-T
Storage only
58-3/4
24-1/2
222
R-17.3
Tall 120 82V120HE-1
4500 W*
62
28-1/4
380
R-17.3
Tall 120 82V120HE-T
Storage only
62
28-1/4
380
R-17.3
*Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring and 4500 watt
heating element. If heating elements of different wattages than those shown are demanded by
zone requirements, they must be specifically requested.
To prevent corrosion, proper pH levels in transfer fluid must be maintained.
Solaraide models meet all current state requirements for solar storage tanks.
The tanks are Rheemglas lined and are designed to operate up to 150 PSI.
WATER CONNECTION NIPPLES
ALL 3/4" N.P.T.
B
8"
COLD
INLET
HOT
OUTLET
RELIEF
COLLECTOR
RETURN
HOT VALVE COLD
A
SENSOR
PROBE
PORT
COLLECTOR
FEED
7"
WATER CIRCULATOR
(REQUIRED FOR NONGRAVITY SYSTEMS)
LAR R
SO ECTO OR
F
R
LL
CO ABLE ATE E
W
SUITABLE PYLENION
T
T
PO D PROSOLU
AN COL
L
GY
77
Marathon®
Non-metallic Tank Features
Efficiency for 30 to 50-gallon models
• .95 EF
•W
•P
ipe wrap energy saving kit included to achieve
maximum energy savings
Performance for 30 to 50-gallon models
•F
HR: 42 - 61 gallons, depending on model
•R
ecovery: up to 21 GPH at a 90° F rise**
•M
arathon’s lightweight tank is easier to
maneuver and position
DESCRIPTION
T
Y
P GAL. MODEL
E CAP. NUMBER
• Bowl shaped tank bottom allows complete
sediment draining
• Water tight grommets keep out over-head
moisture and condensation
Plus…
• Thermally fused upper element provides
protection against dry-firing
• Titanium lower element for superior resistance
to lime build-up
• Full-flow, brass drain valve
Marathon
•S
eamless, blow-molded, polybutene tank –
impervious to rust and corrosion
•M
ultiple layers of filament wound fiberglass give
the tank unmatched strength
•P
olyurethane insulation helps reduce energy
consumption
•R
ecessed drain valve is out of the way brooms
and scrubbers
• High temperature polysulfone dip tube
•T
ough molded polyethylene outer shell resists
dents, scratches, and salt air
• All plastic tank eliminates the need for an
anode rod
C
A
B
Warranty
5-3/4"
• Residential Application: Lifetime limited warranty
on tank and 6-years on parts*
• Commercial Application: 5-year limited tank
warranty and 1-year on parts†
C
*Warranty is provided to original customer in a residential
application after online product registration is complete.
Registration must be completed within 90 days of
installation. See Warranty Certificate for complete
information
†
See Warranty Certificate for c
omplete information
A
B
3/4" NPT
5-3/4"
LEED Point = 1
†
FEATURES
FIRST HOUR
RATING
G.P.H.
RECOVERY
TANK
HEIGHT
A
Tall30MR30238†
42 12
Tall30MR30245† Tall 40 MR40245†
Tall 50 MR50245†
Short 50 MSR50245†
42
52
61
54
HEIGHT TO
WATER CONN.
DIAMETER
B
C
APPROX.
SHIP WT.
(LBS) 78
ENERGY INFO.
ENERGY
FACTOR
4949-1/2
21-5/875
0.95
20 4949-1/2
21-5/875
21 61-1/265-1/2 21-3/4 90
21 62-3/466-3/4 23-1/2 100
21 43-1/447-1/4 28-1/4 95
0.95
0.95
0.95
0.95
Point-of-Use Models
DESCRIPTION
FEATURES
T
Y
P GAL. MODEL
ELEMENT
E CAP. NUMBER
WATTAGE
VOLTAGE
POU 15 MR15120
POU 19.9 MR20120
POU 19.9 MR20230
2000
2000
3000
120
120
240
TANK
HEIGHT
A
31-3/4
30-1/2
30-1/2
HEIGHT TO
WATER CONN.
DIAMETER
B
C
35-3/4
34-1/2
34-1/2
21-3/4
23-1/2
23-1/2
ENERGY INFO.
APPROX.
SHIP WT.
(LBS) ENERGY
FACTOR
58
61
61
N/A
N/A
N/A
Energy Factor based on D.O.E. (Department of Energy) test procedures.
Water heaters furnished with standard 240 or 120 volt AC, single phase non-simultaneous wiring. If heating elements of different wattages than those shown
are demanded, they must be specifically requested. For height to top of T&P and heat traps add 3-1/2” to the height to water connection.
Maximum test pressure: 300 PSI. Maximum working pressure: 150 PSI.
Example: 4500W
= 21 GPH
2.42 x 90°
LEED Point = 1
†
79
Marathon® Heavy Duty
Non-metallic Tank Features
Efficiency
•W
•P
ipe wrap energy saving kit included to achieve
maximum energy savings
Performance
Warranty
• Marathon’s lightweight tank is easier to
maneuver and position
• Bowl shaped tank bottom allows complete
sediment draining
• Water tight grommets keep out over-head
moisture and condensation
• Residential Application: Lifetime limited warranty
on tank and 6-years on parts*
• Commercial Application: 5-year limited tank
warranty and 1-year on parts†
Plus…
• Thermally fused upper element provides
protection against dry-firing
• Titanium upper and lower elements for superior
resistance to lime build-up
• Full-flow, brass drain valve
• Temperature and pressure relief valve and
factory installed vacuum relief valve
*Warranty is provided to original customer in a residential
application after online product registration is complete.
Registration must be completed within 90 days of
installation. See Warranty Certificate for complete
information
†
See Warranty Certificate for c
omplete information
Marathon
•S
eamless, blow-molded, polybutene tank –
impervious to rust and corrosion
•M
ultiple layers of filament wound fiberglass give
the tank unmatched strength
•P
olyurethane insulation helps reduce energy
consumption
•R
ecessed drain valve is out of the way of
brooms and scrubbers
• High temperature polysulfone dip tube
•T
ough molded polyethylene outer shell resists
dents, scratches, and salt air
•R
allons of hot water
in the first hour for 75-gallon models, 91 gallons
for 85-gallon models and 104 gallons for
105-gallon models)**
• Thermostat capable of delivering water
temperature up to 180° F for high temperature
applications
80
DESCRIPTION
T
Y
P GAL. MODEL
E CAP. NUMBER
Tall 75 MHD75245
Tall 85 MHD85245
Tall 105 MHD105245
FEATURES
RECOVERY
IN G.P.H. 100° F RISE**
FIRST HOUR
DELiIVERY
G.P.H.
TANK
HEIGHT
A
18.2
18.2
18.2
78
91
104
58-5/8
66-1/4
66-3/4
HEIGHT TO
WATER CONN.
DIAMETER
B
C
62-5/8
70-1/4
70-3/4
APPROX.
SHIP WT.
(LBS) 28-1/4
28-1/4
30-1/4
122
134
152
• Water heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring; available in 3800 and 4500 watt double element configuration (85-gallon 3000 watt).
• For height to top of heat traps add 3-1/2" to the height to water connection.
• Maximum test pressure: 300 PSI; Maximum working pressure: 150 PSI
C
• 180° F Max. temperature setting
A
B
5-3/4"
81
Thermal Expansion Tanks
Features
A
A
• The safest and most cost e
ffective way to
eliminate problems associated with thermal
expansion in closed loop systems
• Protects water heater and p
lumbing fixtures
from premature failure
B
Warranty
B
arranty*
information
MODELS:
RRT-5
RRT-12
MODEL:
RRT-25
(RRT-5,
RRT-12
Liner only)
STANDARD
TOTAL
MAXIMUM
SYSTEM
FACTORY
MODEL
VOLUME
ACCEPTANCE OPERATING
WORKING
DIAMETER HEIGHT SHIP. CONNECTION PRE-CHARGE
DIAPHRAGM
NUMBER
(GALLONS)
(GALS.)
TEMPERATURE
PRESSURE (PSIG)
(A)
(B)
WT.
(BRASS)
(2.8 KG/CM2)MATERIAL
LINER
MATERIAL
RRT-5
2.0
.9
200°F (93°C)
150 (10.5kg/cm2)
8”
12-5/8”
5
3/4” NPTM
40 PSIG
Butyl Rubber
Polypropylene
RRT-12
4.4
3.2
200°F (93°C)
150 (10.5kg/cm2)
11”
15”
9
3/4” NPTM
40 PSIG
Butyl Rubber
Polypropylene
RRT-25
10.3
10.3
200°F (93°C)
150 (10.5kg/cm2)
15-3/8”
19-1/4”
23
1” NPTF
40 PSIG
Butyl Rubber
Polypropylene
Maximum Working Pressure: 150 PSI. All Models listed by NSF 61; Maximum Allowable Working Temperature: 200°F; Standard Factory Precharge: 40 PSIG
Thermal Expansion Tanks
•T
he Therm-X-Guard is designed to p
rovide
control of maximum pressures at a level below
the relief valve setting. Therefore, the relief valve
does not open and spillage is eliminated. It
also provides additional space in the system to
accommodate the increased volume of water
created by thermal expansion, returning it to the
system upon demand.
• Suitable with water heaters up to 120 gallon
capacity and s upply pressure to 80 P.S.I.
•E
asy to install – and are maintenance free
82

Product Guide - Globalimageserver.com

Transcription

Similar documents

Direct Vent Gas Water Heaters - A

AquaTel M107 Manual - RainHarvest Systems

The Next Necessity™ - InSinkErator Image Server

WeatherMaster® Vertical Window System

Dig Flyer - Terraquest Environmental Consultants, P.C.

preview your owner`s manual how to fill your water

A Valumax System Saves You Money and Time... Everyday!

Water Softeners Bimatic Series

SCIROCCO A THREE TIME CONSUMERS DIGEST BEST BUY