Integrating spheres - Pembroke Instruments

[email protected]
Introduction to UM Integrating Spheres
Modular Configurable Concept from Base Sphere
to Complete Test System
Gigahertz-Optik’s UM* series integrating spheres and
accessories (sphere components) offer one of the
most extensive integrating sphere and IS integrating
sphere system programs available. The modular design concept allows integrating spheres to be set-up
according to the customer’s own application specifications and budget requirements. Our integrating
spheres are built to order from stock standard components using an efficient cost effective production process. Custom modifications of standard components,
custom design components and complete system setups are offered.
* the Ulbrichtsche Kugel (Integrating Sphere) is named
for the designing engineer Richard Ulbricht (1849 to
1923). M stands for Modular concept
UMBB-150 in Custom Design Set-up
Modular Configurable Integrating Spheres
Gigahertz-Optik stocks a selection of hemispheres in different diameters to set up UM integrating spheres. The
two hemispheres form a UMB base integrating sphere. The base spheres are configured with sphere components
which mount onto the sphere. Once the UM sphere is configured port adapters and sphere accessories can be
mounted onto the port frame(s).
UMB Base Sphere
UMPF Port Frame
UMDP Detector Port
UMPB Port Baffle
UMSS Sphere Stand
UMPR Reducer, VL-1101 Detector
Set-up Criteria for Integrating Spheres
There are three main application groups for integrating spheres:
 Integrating Sphere Detectors (ISD)
 Integrating Sphere Sources (ISS)
 Integrating Spheres for Optical Properties of Materials (ISMP)
[email protected]
Set-up Criteria for Integrating Sphere Detectors (ISD)
Light measurement is the primary integrating sphere application. Light emitted in different directions or over a
wide dispersion angle is internally integrated within the sphere for detection. The port and baffle layout must be
designed so that no direct illumination of the light detector by the test sample or light entering the sphere
(calibration source) occurs.
Typical integrating sphere designs for total flux measurement of light sources include:
1. Integrating sphere for sources that emit light in all directions (4π) include a lamp holder for positioning and operating the test lamp in the center of the sphere. A post-mount baffle is set in front of the light detector to avoid
direct irradiation of the detector by the test source. A diffuse window with wide field-of-view is installed in front
of the detector for complete integration of reflected light from the total sphere surface. An auxiliary lamp supports the correction of any self-absorption (substitution) error due to the test sample lamp and its housing.
2. For collimated or low divergence spot (beam emitting) lamps, fiber light guide output and lasers the integrating
spheres are designed with an application port in the sphere wall enabling operation of the source outside the
sphere. A baffle is not needed if the detector is not directly illuminated by the test source. The light detector
must employ a diffuser window to reduce hot-spot detection effects by the collimated beam.
3. For integrating spheres measuring hemispherical emitting sources (2π), like LEDs without a lens, the light detector must be baffled against direct illumination by the test source from the application port. Also the diffuser
helps to completely integrate reflected light from the total sphere surface.
4)
4)
3)
4)
3)
5)
2)
2. Baffle
1)
1)
Collimated Beam Sources
4π Sources
3)
5)
5)
1)
1. Integrating Sphere
2)
3. Diffuser
4. Light Detector
2π Sources
5. Test Source
[email protected]
Set-up Criteria for Integrating Sphere Sources (ISS)
The second main application for integrating spheres are integrating sphere light sources offering a uniform light
output with a hemispherical emission characteristic. These spheres are also called Uniform Light Sources. One of
the main design criteria for integrating sphere light sources is the selection of the light source:
1. Integrating sphere sources that employ all directional lamps (4π) such as halogen lamps provide the highest
level light output when the lamp(s) are mounted inside the sphere. This is because all of the lamp’s flux is integrated by the sphere. Intensity control is achieved in steps by switching lamps on and off.
2. For variable intensity control of lamps that cannot be intensity controlled by adjustment of electrical power
(halogen lamps, arc lamps) the lamp needs to be externally mounted onto the sphere so that a variable aperture or hole pattern attenuator between sphere and lamp can be used to control the level of flux entering the
sphere. The flux level of 4π lamps entering the sphere can be increased using reflectors.
3. Integrating sphere sources employing LEDs offer intensity control in steps (on-off) and variable output intensities through electrical power control. Maximum achievable dynamic range is limited by junction temperature
and spectral drift due to temperature.
2)
4)
2)
2)
3)
5)
5)
3)
5)
2)
Internal Lamps
1. Integrating Sphere
2. Lamp
1)
1)
1)
External Lamp with Variable Aperture
3. Baffle
4. Variable Aperture
LED Source
5. Light Output Port
[email protected]
Set-up Criteria for Integrating Spheres for Optical Properties of Materials (ISMP)
The third main application of integrating spheres is the measurement of optical properties of materials such as
reflectance, transmittance, absorbance, fluorescence, photoluminescence and others. All of these types of measurements use light as the reference signal.
Typical Set-ups with collimated light sources are:
1. Reflectance: Integrating sphere with sample port and collimated light source for sample irradiation through the
sphere. Measurement of total reflectance or diffuse reflectance with open port for regular reflected light.
2. Transmittance: Integrating sphere with sample port and collimated light source for sample irradiation opposite
to the sample port. Measurement of total transmittance or diffuse transmittance with open port for regular
transmitted light.
3. Absorbance, Fluorescence: Integrating sphere with sample holder mounted in the sphere center. Through port
illumination of the test sample with collimated light source (or laser). Measurement of absorbance by calculating the ratio of signal with and without test sample. Measurement of fluorescence or photoluminescence of the
stimulated test sample
4)
2)
2)
4)
1)
1)
Transmittance
Reflectance
1. Integrating Sphere
2. Collimated Light Source
4)
2)
1)
Absorbance
3. Test Sample
Typical integrating sphere design with diffuse light sources are:
Integrating sphere with sample holder for the positioning of the test source in the center of sphere. Illumination of
the test sample with diffuse light. Measurement of absorbance by the ratio of signal with and without test sample.
2)
3)
4)
1)
Diffuse Sample Illumination
1. Integrating Sphere
2. Lamp
3. Baffle
4. Test Sample
[email protected]
1
Barium Sulfate Coated Integrating Spheres
UMBB
UMTB
UMSS
UMPF
UMPP
UMPR
UMDP
UMPB
Base Integrating Spheres
Base Integrating Spheres
Stands for Integrating Spheres
Port Frames
Port Plugs
Port Reducers
Detector Ports
Port Baffles
Base Integrating Spheres
UMBB and UMTB integrating spheres form the basis
of the modular construction system of GigahertzOptik’s modular integrating spheres. The sphere inner
UMBB Integrating Spheres in Custom Design Set-up
surface is coated with barium sulfate a highly diffuse
reflective coating. The spheres are stocked in semi-finished form in different sizes.
Sphere Diameters from 100 (4”) to 1000mm (20”)
Gigahertz-Optik supplies the UM base integrating spheres from 100mm up to 1000mm in diameter.
Barium Sulfate Coating
For larger size integrating spheres Barium Sulfate is the most cost effective coating. Gigahertz-Optik manufactures it’s own ODP97 coating which is characterized by wide angle diffuse reflection, uniform spectral reflection
and high reflectivity. The coating is applied in a process with several thin layers air sprayed. The ODP97 coating
is also available as stand alone product described in Optical Diffuse Material.
Wide Range of Integrating Sphere Components for Integrating Sphere Configuration
Gigahertz-Optik stocks a wide range of sphere components for assembly onto the base integrating sphere.
Sphere components supplied include post mount sockets, flange mounts, stands, port frames, port frame accessories, detector ports and port baffles.
Once the sphere layout is finalized it can be configured with additional accessories to complete the measurement
system. Port adapters, light sources, sample holder and other accessories are described in Light Measurement
System Components.
Integrating Sphere Detectors and Light Meters
One of the most common use of integrating spheres is in light measurement application. With Gigahertz-Optik’s
lightmeters integrating sphere detectors can be individually formed. Standard integrating sphere detectors and
light meters are described in Measurement of Light.
Integrating Sphere Light Sources
The second common use of integrating sphere is as integrating sphere light sources for uniformity calibration and
comparison of imaging systems. Gigahertz-Optik’s integrating sphere sources are described in Light Measurement Standards and Services.
Calibration Service
Complete calibration service is supplied by Gigahertz-Optik calibration laboratory for optical radiation measurement quantities. Please check Light Measurement Standard and Services for more information.
[email protected]
2
UMBB-100:100mm / 4” diameter Integrating Sphere
UMBB-100 Base Integrating Sphere
100mm / 4" diameter ODP97 coated basic sphere for
use with optional post mount socket, stand and other
Gigahertz-Optik accessory components.
Configuration Remarks:
Max port frame size: UMPF-1.5 (38.1mm dia)
Max machined port size: UMMP-75 (75mm dia)
Specifications: 101146_UMBB-100.pdf
UMBB-100 Base Integrating Sphere
Purchasing Information:
Model
Item No.:
Description
UMBB-100
101146
Integrating sphere base model with 100mm diameter
UMSS-SM-14/M6
100891
Socket with M6 threaded hole
UMSS-SMT
100939
Mount set for integrating sphere (2 pieces)
UMSS-BT-100
101158
Bench-top Stand f UMBB-100
Options
UMBB-100-S25 Base Integrating Sphere with Post Socket
100mm / 4" diameter ODP97 coated basic sphere
with UMSS-SM-14/M6 post mount socket fixed at 25°
on the sphere frame (other positions can be specified)
Configuration Remarks:
Max port frame size: UMPF-1.5 (38.1mm dia)
Max machined port size: UMMP-75 (75mm dia)
Specifications: 101146-1_UMBB-100-S25.pdf
UMBB-100-S25 Base Integrating Sphere with Socket
Purchasing Information:
Model
Item No.:
Description
UMBB-100-S25
101146-1
Integrating sphere base model with 100mm diameter plus post mount socket at 25°
[email protected]
3
Base Integrating Sphere with Flange Mount
100mm / 4" diameter ODP97 coated base sphere with
assembled UMSS-SMT flange mount set
Configuration Remarks:
Max port frame size: UMPF-1.5 (38.1mm dia)
Max machined port size: UMMP-75 (75mm dia)
Specifications: 101146-2_UMBB-100-M.pdf
UMBB-100-M Base Integrating Sphere with Mount
Purchasing Information:
Model
Item No.:
Description
UMBB-100-M
101146-2
Integrating sphere base model with 100mm diameter plus UMSS-SMT
sphere mount set
UMBB-100-BT Base Integrating Sphere with Stand
100mm / 4" diameter ODP97 coated Base sphere with
UMSS-BT-100 bench top stand
Configuration Remarks:
Max port frame size: UMPF-1.5 (38.1mm dia)
Max machined port size: UMMP-75 (75mm dia)
Specifications: 101146-3_UMBB-100-BT.pdf
UMBB-100-BT Base Integrating Sphere with Stand
Purchasing Information:
Model
Item No.:
Description
UMBB-100-BT
101146-3
Integrating sphere base model with 100mm diameter and UMSS-BT-100
stand
[email protected]
4
UMBB-150: 150mm / 6” diameter Integrating Sphere
UMBB-150 Base Integrating Sphere
150mm / 6" diameter ODP97 coated basic sphere for
use with optional post mount socket, stand and other
Gigahertz-Optik accessory components.
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-100 (100mm dia)
Specifications: 100926_UMBB-150.pdf
UMBB-150 Base Integrating Sphere
Purchasing Information:
Model
Item No.:
Description
UMBB-150
100926
Integrating sphere base model with 150mm diameter
UMSS-SM-14/M6
100891
Socket with M6 threaded hole
UMSS-SMT
100939
Mount set for integrating sphere (2 pieces)
UMSS-BT-150
101001
Bench-top Stand for UMBB-150-M
Options
UMBB-150-S20 Base Integrating Sphere with Post Socket
150mm / 6" diameter ODP97 coated basic sphere
with UMSS-SM-14/M6 post mount socket fixed at 20°
on the sphere frame (other positions can be specified)
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-100 (100mm dia)
Specifications: 100926-1_UMBB-150-S20.pdf
UMBB-150-S20 Base Integrating Sphere with Socket
Purchasing Information:
Model
Item No.:
Description
UMBB-100-S20
100926-1
Integrating sphere base model with 150mm diameter plus post mount socket at 20°
[email protected]
5
UMBB-150-M Base Integrating Sphere with Flange Mount
150mm / 6" diameter ODP97 coated base sphere with
assembled UMSS-SMT flange mount set
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-100 (100mm dia)
Specifications: 100926-1_UMBB-150-M.pdf
UMBB-150-M Base Integrating Sphere with Mount
Purchasing Information:
Model
Item No.:
Description
UMBB-150-M
100926-2
Integrating sphere base model with 150mm diameter plus UMSS-SMT
sphere mount set
UMBB-150-BT Base Integrating Sphere with Stand
150mm / 6" diameter ODP97 coated Base sphere with
UMSS-BT-150 bench top stand
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-100 (100mm dia)
Specifications: 100926-3_UMBB-150-BT.pdf
UMBB-100-BT Base Integrating Sphere with Stand
Purchasing Information:
Model
Item No.:
Description
UMBB-150-BT
100926-3
Integrating sphere base model with 150mm diameter and UMSS-BT-150
stand
[email protected]
6
UMTB-170: 150mm / 43.2” Diameter Integrating Sphere
UMTB-170 Base Integrating Sphere
170mm / 6.7" inner diameter ODP97 coated basic integrating sphere with stand for use with optional accessory components.
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-100 (100mm dia)
Specifications:
102231_UMTB-170.pdf
101945_UMTB-Z01
UMTB-170 Base Integrating Sphere with and without
UMTB-Z01 base plate
Purchasing Information:
Model
Item No.:
Description
UMTB-170
102231
Integrating sphere base model with 150mm diameter
101945
Bottom plate for use with UMTB-170.
Options
UMTB-Z01
[email protected]
7
UMBB-210: 210mm / 8.2” diameter Integrating Sphere
UMBB-210 Base Integrating Sphere
210mm / 8.2" diameter ODP97 coated basic sphere
for use with optional post mount socket, stand and
other Gigahertz-Optik accessory components.
Configuration Remarks:
Max port frame size: UMPF-3.0 (76.2mm dia)
Max machined port size: UMMP-150 (150mm dia)
Specifications: 100922_UMBB-210.pdf
UMBB-210 Base Integrating Sphere
Purchasing Information:
Model
Item No.:
Description
UMBB-210
100922
Integrating sphere base model with 210mm diameter
UMSS-SM-14/M6
100891
Socket with M6 threaded hole
UMSS-SMT
100939
Mount set for integrating sphere (2 pieces)
UMSS-BT-210
100923
Bench-top Stand for UMBB-210-M
Options
UMBB-210-S15 Base Integrating Sphere with Post Socket
210mm / 8.2" diameter ODP97 coated basic sphere
with UMSS-SM-14/M6 post mount socket fixed at 15°
on the sphere frame (other positions can be specified)
Configuration Remarks:
Max port frame size: UMPF-3.0 (76.2mm dia)
Max machined port size: UMMP-150 (150mm dia)
Specifications: 100922-1_UMBB-210-S15.pdf
UMBB-210-S15 Base Integrating Sphere with Socket
Purchasing Information:
Model
Item No.:
Description
UMBB-210-S15
100922-1
Integrating sphere base model with 210mm diameter plus post mount socket at 15°
[email protected]
8
UMBB-210-M Base Integrating Sphere with Flange Mount
210mm / 8.2" diameter ODP97 coated base sphere
with assembled UMSS-SMT flange mount set
Configuration Remarks:
Max port frame size: UMPF-3.0 (76.2mm dia)
Max machined port size: UMMP-150 (150mm dia)
Specifications: 100922-2_UMBB-210-M.pdf
UMBB-210-M Base Integrating Sphere with Mount
Purchasing Information:
Model
Item No.:
Description
UMBB-210-M
100922-2
Integrating sphere base model with 210mm diameter plus UMSS-SMT
sphere mount set
UMBB-210-BT Base Integrating Sphere with Stand
210mm / 8.2" diameter ODP97 coated Base sphere
with UMSS-BT-210 bench top stand
Configuration Remarks:
Max port frame size: UMPF-3.0 (76.2mm dia)
Max machined port size: UMMP-150 (150mm dia)
Specifications: 100922-3_UMBB-210-BT.pdf
UMBB-210-BT Base Integrating Sphere with Stand
Purchasing Information:
Model
Item No.:
Description
UMBB-210-BT
100922-3
Integrating sphere base model with 210mm diameter and UMSS-BT-210
stand
[email protected]
9
UMBB-300: 300mm / 12” diameter Integrating Sphere
UMBB-300 Base Sphere
300mm / 12" diameter ODP97 coated basic sphere for
use with optional post mount socket, stand and other
Gigahertz-Optik accessory components.
Configuration Remarks:
Max port frame size: UMPF-5.0 (127mm dia)
Max machined port size: UMMP-200 (200mm dia)
Specifications: 100930_UMBB-300.pdf
UMBB-300 Base Integrating Sphere
Purchasing Information:
Model
Item No.:
Description
UMBB-300
100930
Integrating sphere base model with 300mm diameter
UMSS-SM-14/M6
100891
Socket with M6 threaded hole
UMSS-SMT
100939
Mount set for integrating sphere (2 pieces)
UMSS-BT-300
100977
Bench-top Stand for UMBB-300-M
Options
UMBB-300-S10 Base Sphere with Post Socket
300mm / 12" diameter ODP97 coated basic sphere
with UMSS-SM-14/M6 post mount socket fixed at 10°
on the sphere frame (other positions can be specified)
Configuration Remarks:
Max port frame size: UMPF-5.0 (127mm dia)
Max machined port size: UMMP-200 (200mm dia)
Specifications: 100930-1_UMBB-300-S10.pdf
UMBB-300-S10 Base Integrating Sphere with Socket
Purchasing Information:
Model
Item No.:
Description
UMBB-300-S10
100930-1
Integrating sphere base model with 300mm diameter plus post mount socket at 10°
[email protected]
10
UMBB-300-M Base Sphere with Flange Mount
300mm / 12" diameter ODP97 coated base sphere
with assembled UMSS-SMT flange mount set
Configuration Remarks:
Max port frame size: UMPF-5.0 (127mm dia)
Max machined port size: UMMP-200 (200mm dia)
Specifications: 100930-2_UMBB-300-M.pdf
UMBB-300-M Base Integrating Sphere with Mount
Purchasing Information:
Model
Item No.:
Description
UMBB-300-M
100930-2
Integrating sphere base model with 300mm diameter plus UMSS-SMT
sphere mount set
UMBB-300-BT Base Sphere with Stand
300mm / 12" diameter ODP97 coated Base sphere
with UMSS-BT-300 bench top stand
Configuration Remarks:
Max port frame size: UMPF-5.0 (127mm dia)
Max machined port size: UMMP-200 (200mm dia)
Specifications: 100930-3_UMBB-300-BT.pdf
UMBB-300-BT Base Integrating Sphere with Stand
Purchasing Information:
Model
Item No.:
Description
UMBB-300-BT
100930-3
Integrating sphere base model with 300mm diameter and UMSS-BT-300
stand
[email protected]
11
UMBB-300-HF Base Integrating Sphere with Hinge Frame Stand
300mm / 12" diameter ODP97 coated base sphere
with assembled UMSS-HF-300 hinge frame
Configuration Remarks:
Max port frame size: UMPF-5.0 (127mm dia)
Max machined port size: UMMP-200 (200mm dia)
Specifications: 100930-4_UMBB-300-HF.pdf
UMBB-300-HF Base Integrating Sphere with Stand.
One Hemisphere to open.
Purchasing Information:
Model
Item No.:
Description
UMBB-300-HF
100930-4
Integrating sphere base model with 300mm diameter plus UMSS-HF-300
hinge frame
[email protected]
12
UMBB-500: 500mm / 20” diameter Integrating Sphere
UMBB-500 Base Sphere
500mm / 20" diameter ODP97 coated basic sphere for
use with optional flange mount, stand and other Gigahertz-Optik accessory components.
Configuration Remarks:
Max port frame size: UMPF-6.0 (152.4mm dia)
Max machined port size: UMMP-300 (300mm dia)
Specifications: 100920_UMBB-500.pdf
UMBB-500 Base Integrating Sphere
Purchasing Information:
Model
Item No.:
Description
UMBB-500
100920
Integrating sphere base model with 500mm diameter
UMSS-SMT
100939
Mount set for integrating sphere (2 pieces)
UMSS-BT-500
100954
Bench-top Stand for UMBB-500-M
Options
UMBB-500-M Base Sphere with Flange Mount
500mm / 20" diameter ODP97 coated base sphere
with assembled UMSS-SMT flange mount set
Configuration Remarks:
Max port frame size: UMPF-6.0 (152.4mm dia)
Max machined port size: UMMP-300 (300mm dia)
Specifications: 100920-1_UMBB-500-M.pdf
UMBB-500-M Base Integrating Sphere with Mount
Purchasing Information:
Model
Item No.:
Description
UMBB-500-M
100920-1
Integrating sphere base model with 500mm diameter plus UMSS-SMT
sphere mount set
[email protected]
13
UMBB-500-BT Base Sphere with Stand
500mm / 20" diameter ODP97 coated Base sphere
with UMSS-BT-500 bench top stand
Configuration Remarks:
Max port frame size: UMPF-6.0 (152.4mm dia)
Max machined port size: UMMP-300 (300mm dia)
Specifications: 100920-2_UMBB-500-BT.pdf
UMBB-500-BT Base Integrating Sphere with Stand
Purchasing Information:
Model
Item No.:
Description
UMBB-500-BT
100920-2
Integrating sphere base model with 500mm diameter and UMSS-BT-500
stand
[email protected]
14
UMTB-500: 500mm / 20” diameter Integrating Sphere
UMTB-500-HF Base Sphere with Hinge Frame Stand
500mm / 20" diameter ODP97 coated base sphere
with hinge frame stand.
Configuration Remarks:
Max port frame size: UMPF-6.0 (152.4mm dia)
Max machined port size: UMMP-300 (300mm dia)
Optional UMSH-AP500 all purpose sample holder
Specifications: 102717_UMTB-500-HF.pdf
UMTB-500-HF Base Integrating Sphere with Stand.
One Hemisphere to open.
Purchasing Information:
Model
Item No.:
Description
UMTB-500-HF
102717
Integrating sphere base model with 500mm diameter with hinge frame
stand
UMSH-AP-500
102487
Height adjustable sample holder
[email protected]
15
UMTB-1000: 1000mm / 40” diameter Integrating Sphere
UMTB-1000 Base Sphere
1000mm / 40" diameter ODP97 coated basic sphere in
auxiliary frame
Configuration Remarks:
Max port frame size: UMPF-10 (254mm dia)
Max machined port size: UMMP-600 (600mm dia)
Specifications: 102578_UMTB-1000.pdf
UMTB-1000 Base Integrating Sphere
Purchasing Information:
Model
Item No.:
Description
UMTB-1000
102578
Integrating sphere base model with 1000mm diameter with auxiliary frame
[email protected]
16
UMTB-1000-HF Base Sphere with Hinge Frame Stand
1000mm / 40" diameter ODP97 coated base sphere
with hinge frame stand.
Configuration Remarks:
Max port frame size: UMPF-10 (254mm dia)
Max machined port size: UMMP-600 (600mm dia)
Specifications: 102721_UMTB-1000-HF.pdf
UMTB-1000-HF Base Integrating Sphere with Stand.
One Hemisphere to open
Purchasing Information:
Model
Item No.:
Description
UMTB-1000-HF
102721
Integrating sphere base model with 1000mm diameter with hinge frame
stand
UMSH-AP-1000
102499
Height adjustable sample holder
[email protected]
17
UMSS Sphere Stands
For the integration of UMB type integrating spheres
into measurement set-ups or for bench-top use Gigahertz-Optik GmbH supplies mounts and stands for its
UM series integrating spheres.
Sphere Socket for Post Mount
The UMSS-SM14/M6 socket enables Gigahertz-Optik
integrating spheres to mount onto post type stands
with M6 threaded stud, for example Gigahertz-Optik’s
PMS series. The post mount socket is not recommended for use with large size and heavy weighed
spheres.
Sphere Flange Set for Sphere Integration
UMSS-SM14/M6 Post Socket
For mounting UM type integrating spheres into a custom set-up or onto Gigahertz-Optik GmbH UMSS-BT
stands the UMSS-SMT flange set is available.
Bench-top Stand
In applications where the integrating sphere is used
free standing on a bench the UMSS-BT bench-top
stands are the best solution.
Custom made Stand Solution
Custom design stands can be supplied on request.
UMSS-SMT Flange Mount
UMSS-BT Bench-top Stand
[email protected]
18
Specifications and Purchasing Information:
Model
Item No. Description
UMBB-SM14/M6 100891
For Use With Specification
Socket with M6 threaded hole for use UMBB-100
with post mount stands
UMBB-150
UMBB-210
UMBB-300*
100891_UMSS-SM14-M6.pdf
*) Limited use in applications with
heavy load port adapters
UMSS-SMT
100939
Flange mount
UMBB-100
UMBB-150
UMBB-210
UMBB-300
UMBB-500
100939_UMSS-SMT.pdf
UMSS-BT-100
101158
Bench-top stand
UMBB-100
101158_UMSS-BT-100.pdf
UMSS-BT-150
101001
Bench-top stand**
UMBB-150
101001_UMSS-BT-150.pdf
UMSS-BT-210
100923
Bench-top stand**
UMBB-210
100923_UMSS-BT-210.pdf
UMSS-BT-300
100977
Bench-top stand**
UMBB-300
100977_UMSS-BT-300.pdf
UMSS-BT-500
100954
Bench-top stand**
UMBB-500
100954_UMSS-BT-500.pdf
** UMSS-SMT necessary
[email protected]
19
UMPF and UMPF-HL Port Frames
Port frames enable the assembly of port frame accessories such as port plugs and port adapters as well as
port adapters and light sources.
Port Frame with V-Groove Interface
The UMPF and UMPF-HL port frames feature a machined V-Groove to mount accessory parts to the
frame using set-screws.
Lightweight Port Frames
The UMPF port frame series is designed for mounting
of lightweight accessory parts with low moment of
torque onto the frame.
UMPF Port frames are available in different sizes
Heavyweight HL Port Frames
The UMPF-HL heavy load port frame series is designed for mounting heavier accessory parts onto the
frame.
Port Frames with Sample Holder
The UMPF-SH port frame series provides threaded
holes or set-screws on the front side for direct mounting of sample holder or adapters.
Custom Design Port Frames
Custom designed parts can be supplied on request.
UMPF Assembled on Integrating Sphere
[email protected]
20
Specifications and Purchasing Information:
Model
Item No. Description
Free Aperture
Specification
UMPF-0.5
100886
Port Frame
12.7mmØ/0.5inØ
100886_UMPF-0.5.pdf
UMPF-1.0
100887
Port Frame
25.4mmØ/1.0inØ
100887_UMPF-1.0.pdf
UMPF-1.0-HL
tbc.
Port Frame Heavy Load
25.4mmØ/1.0inØ
tbc.
UMPF-1.5
100881
Port Frame
38.1mmØ/1.5inØ
100881_UMPF-1.5.pdf
UMPF-1.5-HL
101693
Port Frame Heavy Load
38.1mmØ/1.5inØ
101693_UMPF-1.5-HL.pdf
UMPF-1.5-SH
tbc.
Port Frame Sample Holder
38.1mmØ/1.5inØ
tbc.
UMPF-2.0
100888
Port Frame
50.8mmØ/2.0inØ
100888_UMPF-2.0.pdf
UMPF-2.0-HL
102283
Port Frame Heavy Load
50.8mmØ/2.0inØ
tbc.
UMPF-2.0-SH
tbc.
Port Frame Sample Holder
50.8mmØ/2.0inØ
tbc.
UMPF-2.0/3.5
100890
Port Frame with Wide Ring
50.8mmØ/2.0inØ
tbc.
UMPF-2.5
100889
Port Frame
63.5mmØ/2.5inØ
100889_UMPF-2.5.pdf
UMPF-3.0
101292
Port Frame
76.2mmØ/3.0inØ
101292_UMPF-3.0.pdf
UMPF-3.0-SH
102433
Port Frame Sample Holder
76.2mmØ/3.0inØ
tbc.
UMPF-4.0
100938
Port Frame
101.6mmØ/4.0inØ
100938_UMPF-4.0.pdf
UMPF-5.0
100917
Port Frame
127mmØ/5.0inØ
100917_UMPF-5.0.pdf
UMPF-5.0-HL
102014
Port Frame Heavy Load
127mmØ/5.0inØ
tbc.
UMPF-5.0-SH
102539
Port Frame Sample Holder
127mmØ/5.0inØ
tbc.
UMPF-6.0
101173
Port Frame
152,4mmØ/6.0inØ
101173_UMPF-6.0.pdf
UMPF-6.0-SH
102500
Port Frame Sample Holder
152,4mmØ/6.0inØ
tbc.
UMPF-10.0
101132
Port Frame
254mmØ/10.0inØ
101132_UMPF-10.0.pdf
UMPF-12.0
tbc.
Port Frame
300mmØ/12.0inØ
tbc.
[email protected]
21
UMPF-C Port Frame Caps
Port Frame Caps
Port frame cups are used to cover sphere ports during
transportation or while sphere is not in use. Port frame
caps are made by plastic material.
UMPF-C Port Frame Cap
Specifications and Purchasing Information:
Model
Item No.
Description
Inner Cap Dia
UMPF-0.5-C
102870
Port Frame Cap for UMPF-0.5
xx mm
UMPF-1.0-C
102871
Port Frame Cap for UMPF-1.0 and UMPF-1.0-HL
xx mm
UMPF-1.5-C
102872
Port Frame Cap for UMPF-1.5 and UMPF-1.5-HL
xx mm
UMPF-1.5-SH-C
102873
Port Frame Cap for UMPF-1.5-SH
xx mm
UMPF-2.0-C
102874
Port Frame Cap for UMPF-2.0 and UMPF-2.0-HL
xx mm
UMPF-2.0-SH-C
102875
Port Frame Cap for UMPF-2.0-SH
xx mm
UMPF-2.0/3.5-C
102876
Port Frame Cap for UMPF-2.0/3.5
xx mm
UMPF-2.5-C
102877
Port Frame Cap for UMPF-2.5
xx mm
UMPF-3.0-C
102878
Port Frame Cap for UMPF-3.0
xx mm
UMPF-3.0-SH-C
102879
Port Frame Cap for UMPF-3.0-SH
xx mm
UMPF-4.0-C
102880
Port Frame Cap for UMPF-4.0
xx mm
UMPF-5.0-C
102881
Port Frame Cap for UMPF-5.0 and UMPF-5.0-HL
xx mm
UMPF-5.0-SH-C
102882
Port Frame Cap for UMPF-5.0-SH
xx mm
UMPF-6.0-C
102883
Port Frame Cap for UMPF-6.0
xx mm
UMPF-6.0-SH-C
102884
Port Frame Cap for UMPF-6.0-SH
xx mm
UMPF-10.0-C
102885
Port Frame Cap for UMPF-10.0
xx mm
UMPF-12.0-C
102886
Port Frame Cap for UMPF-12.0
xx mm
[email protected]
22
UMPP and UMPP-HL Port Plugs
Port Plugs
Port plugs are used to close unused sphere ports.
The inner surface of UMPP ports plugs is coated with
barium sulfate ODP97 coating. Port plugs are fasten to
port frames.
Sphere Surface Level Port Plug
Port plugs supplied by Gigahertz-Optik GmbH close
the port at the surface level of the sphere to reduce
shadow effects.
Port Plugs for UMPF Port Frames
UMPP port plugs are designed for use with UMPF Port
Frames. They mount onto the frame with three setscrews.
UMPP-0.5 Port-plug
Port Plugs for UMPF-HL Port Frames
UMPP-HL port plugs are designed for use with UMPFHL Port Frames. They mount onto the frame with three
set-screws.
Barium Sulfate Coating
The inner surface of the Port Plugs is coated with Gigahertz-Optik’s ODP97 barium sulfate coating featuring high level diffuse reflection.
Custom Port-adapters
Port plugs can be machined to make custom design
port reducers or port adapters then coated with barium
sulfate.
Sphere Surface
Port Plug Surface
UMPP Close the Ports at Sphere Surface Level
[email protected]
23
Specifications and Purchasing Information:
Model
Item No. Description
Plug-Size
Specification
UMPP-0.5
100932
Port Plug for UMPF-0.5
12.7mmØ/0.5inØ
100932_UMPP-0.5.pdf
UMPP-1.0
100933
Port Plug for UMPF-1.0
25.4mmØ/1.0inØ
100933_UMPP-1.0.pdf
UMPP-1.0-HL
tbc.
Port Plug for UMPF-1.0-HL
25.4mmØ/1.0inØ
tbc.
UMPP-1.5
100934
Port Plug for UMPF-1.5
38.1mmØ/1.5inØ
100934_UMPP-1.5.pdf
UMPP-1.5-HL
102481
Port Plug for UMPF-1.5-HL
38.1mmØ/1.5inØ
tbc.
UMPP-1.5-SH
tbc.
Port Plug for UMPF-1.5-SH
38.1mmØ/1.5inØ
tbc.
UMPP-2.0
100935
Port Plug for UMPF-2.0
50.8mmØ/2.0inØ
100935_UMPP-2.0.pdf
UMPP-2.0-HL
102557
Port Plug for UMPF-2.0-HL
50.8mmØ/2.0inØ
tbc.
UMPP-2.0-SH
tbc.
Port Plug for UMPF-2.0-SH
50.8mmØ/2.0inØ
tbc.
UMPP-2.0/3.5
100951
Port Plug for UMPF-2.0/3.5
50.8mmØ/2.0inØ
tbc.
UMPP-2.5
100936
Port Plug for UMPF-2.5
63.5mmØ/2.5inØ
100936_UMPP-2.5.pdf
UMPP-3.0
101293
Port Plug for UMPF-3.0
76.2mmØ/3.0inØ
101936_UMPP-3.0.pdf
UMPP-3.0-SH
102434
Port Plug for UMPF-3.0-SH
76.2mmØ/3.0inØ
tbc.
UMPP-4.0
100937
Port Plug for UMPF-4.0
101.6mmØ/4.0inØ
100937_UMPP-4.0.pdf
UMPP-5.0
100896
Port Plug for UMPF-5.0
127mmØ/5.0inØ
tbc.
UMPP-5.0-HL
102815
Port Plug for UMPF-5.0-HL
127mmØ/5.0inØ
tbc.
UMPP-5.0-SH
102538
Port Plug for UMPF-5.0-SH
127mmØ/5.0inØ
tbc.
UMPP-6.0
101447
Port Plug for UMPF-6.0
152,4mmØ/6.0inØ
101447_UMPP-6.0.pdf
UMPP-6.0-SH
102501
Port Plug for UMPF-6.0-SH
152,4mmØ/6.0inØ
tbc.
UMPP-10.0
101133
Port Plug for UMPF-10.0
254mmØ/10.0inØ
101133_UMPF-10.0.pdf
[email protected]
24
UMPR Port Reducers
Port Reducers Reduce Port Aperture Size
Port Reducers are used to reduce port size to smaller
diameters than the free port.
Port Reducers Change Aperture Edge
Port Reducers aperture edge can be specified with
straight or knife edge.
Port Reducers Change Port Aperture Shape
Port Reducers are also used to change the port
shape. Most common are rectangular shapes but in
principal any machine able shape can be offered.
Port Reducers for UMPF Port Frames
ISS-15 Integrating Sphere Source with UMPR Port
Reducer mount to Standard Port Frame.
UMPR Port Reducers are designed for use with UMPF
port frames. They mount onto the frame with three setscrews. The reducers are machined out of UMPP Port
Plugs and are available for all port frame sizes.
Sphere Surface Level Port Reduction
The reflecting surface of the Port Reducers supplied
by Gigahertz-Optik GmbH reduce the port opening at
the surface level of the inner sphere to reduce shadow
effects.
Barium Sulfate ODP97 Coating
The inner surface of the Port Reducer is coated with
Gigahertz-Optik’s Barium Sulfate ODP97 coating featuring the same reflection characteristic than the ODP97 sphere coating.
Custom Size Aperture
ISS Light Source with Rectangular Aperture Reducer
Customers can specify the hole diameter in mm in 0.5
mm steps and the edge design. Different aperture
shapes than circular can be offered on request.
Knife Edge Style
Straight Edge Style
Two edge versions are offered for UMPR
[email protected]
25
Specifications and Purchasing Information:
Model
Item No. Description
Max Aperture Specification
Diameter
UMPR-0.5
100944
Port Reducer for UMPF-0.5
18mm
100932_UMPP-0.5-K.pdf
UMPR-1.0
100945
Port Reducer for UMPF-1.0
21mm
100933_UMPP-1.0.pdf
UMPR-1.0-HL
tbc.
Port Reducer for UMPF-1.0-HL
21mm
tbc.
UMPR-1.5
100946
Port Reducer for UMPF-1.5
34mm
100934_UMPP-1.5.pdf
UMPR-1.5-HL
102555
Port Reducer for UMPF-1.5-HL
34mm
tbc.
UMPR-1.5-SH
tbc.
Port Reducer for UMPF-1.5-SH
34mm
tbc.
UMPR-2.0
100947
Port Reducer for UMPF-2.0
46mm
100935_UMPP-2.0.pdf
UMPR-2.0-HL
102554
Port Reducer for UMPF-2.0-HL
46mm
tbc.
UMPR-2.0-SH
tbc.
Port Reducer for UMPF-2.0-SH
46mm
tbc.
UMPR-2.0/3.5
100951
Port Reducer for UMPF-2.0/3.5
46mm
tbc.
UMPR-2.5
100948
Port Reducer for UMPF-2.5
59mm
100936_UMPP-2.5.pdf
UMPR-3.0
101294
Port Reducer for UMPF-3.0
72mm
101293_UMPP-3.0.pdf
UMPR-3.0-SH
102435
Port Reducer for UMPF-3.0-SH
72mm
tbc.
UMPR-3.0-SH50-CIE127
102436
Port Reducer for UMPF-3.0.
50mm diameter CIE127 conform aperture for effective flux measurements
102436_UMPR-3.0-SH-50CIE127
UMPR-4.0
100949
Port Reducer for UMPF-4.0
97mm
100937_UMPP-4.0.pdf
UMPR-5.0
100895
Port Reducer for UMPF-5.0
123mm
100896_UMPP-5.0.pdf
UMPR-5.0-HL
102816
Port Reducer for UMPF-5.0-HL
123mm
tbc.
UMPR-5.0-SH-
102537
Port Reducer for UMPF-5.0-SH
123mm
tbc.
UMPR-6.0
101446
Port Reducer for UMPF-6.0
148mm
101447_UMPP-6.0.pdf
UMPR-6.0-SH
102502
Port Reducer for UMPF-6.0-SH
148mm
tbc.
UMPR-10.0
101134
Port Reducer for UMPF-10.0
250mm
101133_UMPF-10.0.pdf
[email protected]
26
UMPR-C Port Reducer Caps
Port Reducer Caps
Port reducer caps are used to cover sphere ports with
mounted port reducer during transportation or while
sphere is not in use. Port reducer caps are made by
plastic material.
UMPR-C Port Frame Cap
Specifications and Purchasing Information:
Model
Item No.
Description
Inner Cap Dia
UMPR-0.5-C
102887
Port Reducer Cap for UMPR-0.5
xx mm
UMPR-1.0-C
102888
Port Reducer Cap for UMPR-1.0 and UMPF-1.0-HL
xx mm
UMPR-1.5-C
102889
Port Reducer Cap for UMPR-1.5 and UMPF-1.5-HL
xx mm
UMPR-1.5-SH-C
102890
Port Reducer Cap for UMPR-1.5-SH
xx mm
UMPR-2.0-C
102891
Port Reducer Cap for UMPR-2.0 and UMPF-2.0-HL
xx mm
UMPR-2.0-SH-C
102892
Port Reducer Cap for UMPR-2.0-SH
xx mm
UMPR-2.0/3.5-C
102893
Port Reducer Cap for UMPR-2.0/3.5
xx mm
UMPR-2.5-C
102894
Port Reducer Cap for UMPR-2.5
xx mm
UMPR-3.0-C
102895
Port Reducer Cap for UMPR-3.0
xx mm
UMPR-3.0-SH-C
102896
Port Reducer Cap for UMPR-3.0-SH
xx mm
UMPR-4.0-C
102897
Port Reducer Cap for UMPR-4.0
xx mm
UMPR-5.0-C
102898
Port Reducer Cap for UMPR-5.0 and UMPF-5.0-HL
xx mm
UMPR-5.0-SH-C
102899
Port Reducer Cap for UMPR-5.0-SH
xx mm
UMPR-6.0-C
102900
Port Reducer Cap for UMPF-6.0
xx mm
UMPR-6.0-SH-C
102901
Port Reducer Cap for UMPF-6.0-SH
xx mm
UMPR-10.0-C
102902
Port Reducer Cap for UMPF-10.0
xx mm
[email protected]
27
UMMP Machined Ports
Low Profile Machined Ports
For applications where a standard port frame is not
useful because the height of the port frame is too high
machined ports may be an alternative. These ports are
machined directly into the UMB or UMT sphere housing forming a low profile stepped lip around the port
hole. Machined ports are custom made. Please contact the factory for personal assistance.
Machined Ports with Protective Cap
The machined port is designed with a internal step
which accepts a plastic cap to close the port when the
sphere is not in use.
Machined Ports with Knife Edge
Machining of UMMP Port for use with Protection Cap
Knife edge design ports prevent stray light from
bouncing off the port edge and entering the sphere.
The sharpest knife edge is achieved using machined
ports without an internal step. For shipment the port is
covered with a thin plate taped onto it.
UMMP with step for protection cap
UMMP with knife edge
[email protected]
28
Purchasing Information:
Model
Item No. Description
Specification
UMMP-xx
102036
Machined Port with Protection Cap. Diameter xx
needs to be specified
tbc.
UMMP-KE-xx
102903
Machined Port with Knife Edge. Without Protection tbc.
Cap. Diameter xx needs to be specified
[email protected]
29
UMDP Detector Ports
Detector Ports to Mount Light Detectors to the
Integrating Sphere
Gigahertz-Optik GmbH supplies detector ports to hold
the many different kinds of light detectors and light
meters it manufactures.
Detector Port for 11 type Detectors
Series 11 type detectors such as the PD-11, VL-11
and TD-11 are most commonly used on integrating
spheres for measurement and reference. The complete detector-port consists of a UMPF-0.5 port frame
and UMPA-0.5/11 port adapter. The port adapter can
be used with and without the UMPA-0.5/11-DR diffuser window (RADIN - RADiation INtegrator).
Detector Ports for 37 and 45 type Detectors
UMPF-0.5 plus UMPA-0.5/11
Gigahertz-Optik’s light detectors in 37 and 45 type
housing can be mounted to integrating spheres using
the UMDP-37 and UMDP-45 detector-ports.
Detector Port for BTS256-LED Tester
The UMDP-BTS256LED Detector Port offers a bayonet style mount for fast and simple mounting and removal of the BTS256-LED tester on the sphere.
Detector Port for Fiber Light Guides and Other
Detectors
Adapters are available to mount light guides or other
detector types to integrating spheres. These can be
found under “Port Adapter”. Please contact the factory
for personal assistance.
UMDP-BTS256 Detector Port
[email protected]
30
Specifications and Purchasing Information:
Specification
For Use With
Model
Item No. Description
UMPF-0.5
UMPA-0.5/11
UMPA-0.5/11-RD
100886
100924
101291
Detector port configuration
Port Frame
tbc.
Port Adapter
Optional Diffuser
PD-11
VL-11
TD-11
UFC-11
UMDP-37
100919
Detector Port
tbc.
37 type detectors
UMDP-45
100953
Detector Port
tbc.
45 type detectors
UMDP-BTS256LED 102684
Detector Port
tbc.
BTS256-LED
[email protected]
31
UMPB Port Baffles
Port Baffles Prohibit Direct Port Irradiation
Integrating spheres work through multiple internal diffuse reflection of the incoming light signal. The ports
should be arranged so that no light from any other port
or light source inside the sphere can reach the port
directly without multiple reflections. In practice this is
not always possible so baffles between ports and between light sources and ports are used to avoid direct
illumination.
Sphere Mount Baffles
UMPB-SM Sphere Mount Baffle
Sphere mount baffles are thin coated plates directly
mounted to the sphere housing. They are typically
used between two ports or to block a port from direct
view of a light source.
Post Mount Baffles
Post mount baffles are thin coated plates mounted on
a post to the sphere housing. They are typically used
to baffle center mounted lamps, light emitting or reflecting samples from directly irradiating a port.
In-Line Baffle
UMPB-PM Post Mount Baffle
In-line baffles are thin coated plates fixed onto posts
located between two ports that are180 degrees opposite each other.
Custom Baffle Design & Fabrication
UM series integrating spheres offer a lot of freedom in
configuration. Custom made baffles are available designed and fabricated based on end-user specifications assuming standard sphere principle guidelines
are followed.
UMPB-TD Two Directional Baffle
UMPB-IL In-Line Baffle
[email protected]
1
Synthetic Coated Integrating Spheres
UMBK Base Spheres
UMTK Base Spheres
UMSS Sphere Stands
UMPF Port Frames
UMPP Port Plugs
UMPR Port Reducers
UMDP Detector Ports
UMPB Port Baffles
Base Integrating Spheres
UMBK and UMTK integrating spheres form the basis
of the modular construction system of GigahertzOptik’s modular integrating spheres. The base
spheres inner surface is coated with a synthetic insert
machined out of Gigahertz-Optik’s ODM98 synthetic
material. Sphere components and semi-finished spheres are stocked in different sizes.
Synthetic Diffuse Reflecting Coating with High Reflection
The synthetic ODM98 coating is a nearly perfect diffuse reflective coating combine with high resistance against
high density UV to NIR optical radiation. Because of the light permeability of ODM98 optical radiation is reflected
within the material itself which requires a minimum thickness of the synthetic material for its high reflectance. The
thickness of the ODM98 coating of UMBK and UMTK integrating spheres is typically 10mm. The synthetic material ODM98 is also available as independent product as described in Optical Diffuse Material.
Sphere Diameters from 80mm (3.2”) to 280mm (20”)
Gigahertz-Optik supplies the UMBK and UMTK base integrating spheres from 80mm up to 280mm in diameter.
The base spheres can be configured with integrating sphere components which are stocked at Gigahertz-Optik.
Smaller size Integrating spheres with synthetic ODM98 coating are described in the datasheet UPK Series Precise Machined Integrating Spheres in our website.
Wide Range of Integrating Sphere Components for Integrating Sphere Configuration
Gigahertz-Optik stocks a wide range of sphere components for assembly onto the base integrating sphere.
Sphere components supplied include post mount sockets, flange mounts, stands, port frames, port frame accessories, detector ports and port baffles.
Once the sphere layout is finalized it can be configured with additional accessories to complete the measurement
system. Port adapters, light sources, sample holder and other accessories are described in Light Measurement
System Components.
Integrating Sphere Detectors and Light Meters
One of the most common use of integrating spheres is in light measurement application. With Gigahertz-Optik’s
lightmeters integrating sphere detectors can be individually formed. Standard integrating sphere detectors and
light meters are described in Measurement of Light.
Integrating Sphere Light Sources
The second common use of integrating sphere is as integrating sphere light sources for uniformity calibration and
comparison of imaging systems. Gigahertz-Optik’s integrating sphere sources are described in Light Measurement Standards and Services.
Calibration Service
Complete calibration service is supplied by Gigahertz-Optik calibration laboratory for optical radiation measurement quantities. Please check Light Measurement Standard and Services for more information.
[email protected]
2
UMTK-80: 80mm / 3.2” Diameter Integrating Sphere
UMTK-80 Base Integrating Sphere
80mm / 3.5" inner diameter ODM98 coated basic integrating sphere with auxiliary frame for use with optional accessory components.
Configuration Remarks:
Max port frame size: UMPF-1.0 (25.4mm dia)
Max machined port size: UMMP-40 (40mm dia)
Specifications: 102562_UMTK-80.pdf
UMTK-80 base integrating sphere
Purchasing Information:
Model
Item No.:
Description
UMTK-80
102562
Integrating sphere base model with 80mm diameter. Auxiliary Frame
-
-
Options
-
[email protected]
3
UMBK-130: 130mm / 5.1” Diameter Integrating Sphere
UMBK-130 Base Integrating Sphere
130mm / 5.1" inner diameter ODM98 coated basic
sphere for use with optional post mount socket, stand
and other accessory components.
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-80 (80mm dia)
Specifications: 101672_UMBK-130.pdf
UMBK-130 base integrating sphere
Purchasing Information:
Model
Item No.:
Description
UMBK-130
101672
Integrating sphere base model with 130mm diameter
UMSS-SM-14/M6
100891
Socket with M6 threaded hole
UMSS-SMT
100939
Mount set for integrating sphere (2 pieces)
UMSS-BT-150
101001
Bench-top Stand for UMBP-130 (UMSS-SMT necessary)
Options
UMBK-130-S25 Base Integrating Sphere with Post Socket
130mm / 5.1" inner diameter ODM98 coated basic
sphere with UMSS-SM-14/M6 post mount socket fixed
at 25° on the sphere frame for use with optional accessory components. Other post socket positions can
be specified.
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-80 (80mm dia)
Specifications: 101672-1_UMBK-130-S25.pdf
UMBK-130-S25 base integrating sphere with socket
Purchasing Information:
Model
Item No.:
Description
UMBK-135-S25
101672-1
Integrating sphere base model with 130mm diameter plus post mount socket at 25°
[email protected]
4
UMBK-130-M Base Integrating Sphere with Flange Mount
130mm / 5.1" inner diameter ODM98 coated base
sphere with assembled UMSS-SMT flange mount set
for use with optional accessory components.
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-80 (80mm dia)
Specifications: 101672-2_UMBK-130-M.pdf
UMBK-130-M base integrating sphere with mount
Purchasing Information:
Model
Item No.:
Description
UMBK-130-M
101672-2
Integrating sphere base model with 130mm diameter plus UMSS-SMT
sphere mount set
UMBK-130-BT Base Integrating Sphere with Stand
130mm / 5.1" inner diameter ODM98 coated base
sphere with UMSS-BT-150 bench top stand for use
with optional accessory components.
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-80 (80mm dia)
Specifications: 101672-3_UMBK-130-BT.pdf
UMBK-130-BT base integrating sphere with stand
Purchasing Information:
Model
Item No.:
Description
UMBK-130-BT
101672-3
Integrating sphere base model with 130mm diameter and UMSS-BT-150
stand
[email protected]
5
UMTK-150: 150mm / 43.2” Diameter Integrating Sphere (former UMBK-150)
UMTK-150 Base Integrating Sphere
150mm / 6" inner diameter ODM98 coated basic integrating sphere with stand for use with optional accessory components.
Configuration Remarks:
Max port frame size: UMPF-2.5 (63.5mm dia)
Max machined port size: UMMP-100 (100mm dia)
Specifications: 101422_UMTK-150.pdf
101945_UMT-Z01
UMTK-150 base integrating sphere with and without
UMT-Z01
Purchasing Information:
Model
Item No.:
Description
UMTK-150
101422
Integrating sphere base model with 150mm diameter
101945
Bottom plate to be mount to the stand of UMTP-150.
Options
UMT-Z01
[email protected]
6
UMBK-190: 190mm / 7.5” diameter Integrating Sphere
UMBK-190 Base Integrating Sphere
190mm / 7.5" inner diameter ODM98 coated basic
sphere for use with optional mount, stand and other
accessory components.
Configuration Remarks:
Max port frame size: UMPF-3.0 (76.2mm dia)
Max machined port size: UMMP-150 (150mm dia)
Specifications: 101002_UMBK-190.pdf
UMBK-190 base integrating sphere
Purchasing Information:
Model
Item No.:
Description
UMBK-190
101002
Integrating sphere base model with 190mm diameter
UMSS-SMT
100939
Mount set for integrating sphere (2 pieces)
UMSS-BT-210
100923
Bench-top Stand for UMBP-210 (UMSS-SMT necessary)
Options
UMBK-190-M Base Integrating Sphere with Flange Mount
190mm / 7.5" inner diameter ODM98 coated base
sphere with assembled UMSS-SMT flange mount set
for use with optional accessory components.
Configuration Remarks:
Max port frame size: UMPF-3.0 (76.2mm dia)
Max machined port size: UMMP-150 (150mm dia)
Specifications: 101002-1_UMBK-190-M
UMBK-190-M base integrating sphere with mount
Purchasing Information:
Model
Item No.:
Description
UMBK-190-M
101002-1
Integrating sphere base model with 190mm diameter plus UMSS-SMT
sphere mount set
[email protected]
7
UMBK-190-BT Base Integrating Sphere with Stand
190mm / 7.5" inner diameter ODM98 coated base
sphere with UMSS-BT-210 bench top stand for use
with optional accessory components.
Configuration Remarks:
Max port frame size: UMPF-3.0 (76.2mm dia)
Max machined port size: UMMP-150 (150mm dia)
Specifications: 101002-2_UMBK-190-BT.pdf
UMBK-190-BT base integrating sphere with stand
Purchasing Information:
Model
Item No.:
Description
UMBK-190-BT
101002-2
Integrating sphere base model with 190mm diameter and UMSS-BT-210
stand
[email protected]
8
UMBK-280: 280mm / 11” diameter Integrating Sphere
UMBK-280 Base Sphere
280mm / 11" inner diameter ODM98 coated basic
sphere for use with optional post mount socket, stand
and other Gigahertz-Optik accessory components.
Configuration Remarks:
Max port frame size: UMPF-5.0 (127mm dia)
Max machined port size: UMMP-200 (200mm dia)
Specifications: 101043_UMBK-280.pdf
UMBK-280 base integrating sphere
Purchasing Information:
Model
Item No.:
Description
UMBK-280
101043
Integrating sphere base model with 2800mm diameter
UMSS-SM-14/M6
100891
Socket with M6 threaded hole
UMSS-SMT
100939
Mount set for integrating sphere (2 pieces)
UMSS-BT-300
100977
Bench-top Stand for UMBP-300 (UMSS-SMT necessary)
Options
UMBK-280-M Base Sphere with Flange Mount
280mm / 11" inner diameter ODM98 coated base
sphere with assembled UMSS-SMT flange mount set
for use with optional accessory components.
Configuration Remarks:
Max port frame size: UMPF-5.0 (127mm dia)
Max machined port size: UMMP-200 (200mm dia)
Specifications: 101043-1_UMBK-280-M.pdf
UMBK-280-M base integrating sphere with mount
Purchasing Information:
Model
Item No.:
Description
UMBK-280-M
101043-1
Integrating sphere base model with 280mm diameter plus UMSS-SMT
sphere mount set
[email protected]
9
UMBK-280-BT Base Sphere with Stand
280mm / 11" inner diameter ODM98 coated base
sphere with UMSS-BT-300 bench top stand for use
with optional accessory components.
Configuration Remarks:
Max port frame size: UMPF-5.0 (127mm dia)
Max machined port size: UMMP-200 (200mm dia)
Specifications: 101043-2_UMBK-280-BT.pdf
UMBK-280-BT base integrating sphere with stand
Purchasing Information:
Model
Item No.:
Description
UMBK-280-BT
101043-2
Integrating sphere base model with 280mm inner diameter and UMSS-BT300 stand
[email protected]
10
UMSS Sphere Stands
For the integration of UMBK type integrating spheres
into measurement set-ups or for bench-top use Gigahertz-Optik GmbH supplies mounts and stands for its
UM series integrating spheres.
Sphere Socket for Post Mount
The UMSS-SM14/M6 socket enables Gigahertz-Optik
integrating spheres to mount onto post type stands
with M6 threaded stud, for example Gigahertz-Optik’s
PMS series. The post mount socket is not recommended for use with large size and heavy weighed
spheres.
Sphere Flange Set for Sphere Integration
UMSS-SM14/M6 post socket
For mounting UM type integrating spheres into a custom set-up or onto Gigahertz-Optik GmbH UMSS-BT
stands the UMSS-SMT flange set is available.
Bench-top Stand
In applications where the integrating sphere is used
free standing on a bench the UMSS-BT bench-top
stands are the best solution.
Custom made Stand Solution
Custom design stands can be supplied on request.
UMSS-SMT flange mount
UMSS-BT bench-top stand
[email protected]
11
Specifications and Purchasing Information:
Model
Item No. Description
UMSS-SM14/M6 100891
Socket with M6 threaded hole for use
with post mount stands
For Use With Specification
UMBK-130
UMBK-190*
100891_UMSS-SM14-M6.pdf
*) Limited use in applications with
heavy port adapters
UMSS-SMT
100939
Flange mount
UMBK-130
UMBK-190
UMBK-280
100939_UMSS-SMT.pdf
UMSS-BT-150
101001
Bench-top stand**
UMBK-130
101001_UMSS-BT-150.pdf
UMSS-BT-210
101001
Bench-top stand**
UMBK-190
100923_UMSS-BT-210.pdf
UMSS-BT-300
101001
Bench-top stand**
UMBK-280
100977_UMSS-BT-300.pdf
** UMSS-SMT necessary
[email protected]
12
UMPF and UMPF-HL Port Frames
Port frames enable the assembly of port frame accessories such as port plugs and port adapters as well as
port adapters and light sources.
Port Frame with V-Groove Interface
The UMPF port frames feature a machined V-groove
to mount accessory parts to the frame using setscrews.
Lightweight Port Frames
The UMPF port frame series is designed for mounting
of lightweight accessory parts with low moment of
torque onto the frame.
UMPF Port frames in different sizes
Heavyweight HL Port Frames
The UMPF-HL heavy load port frame series is designed for mounting heavier accessory parts onto the
frame.
Port Frames with Sample Holder
The UMPF-SH port frame series provides threaded
holes or set-screws on the front side for direct mounting of sample holder or adapters.
Custom Design Port Frames
Custom designed parts can be supplied on request.
UMPF assembled on integrating sphere
[email protected]
13
Specifications and Purchasing Information:
Model
Item No. Description
Free Aperture
Specification
UMPF-0.5
100886
Port Frame
12.7mmØ/0.5inØ
100886_UMPF-0.5.pdf
UMPF-1.0
100887
Port Frame
25.4mmØ/1.0inØ
100887_UMPF-1.0.pdf
UMPF-1.0-HL
tbc.
Port Frame Heavy Load
25.4mmØ/1.0inØ
tbc.
UMPF-1.5
100881
Port Frame
38.1mmØ/1.5inØ
100881_UMPF-1.5.pdf
UMPF-1.5-HL
101693
Port Frame Heavy Load
38.1mmØ/1.5inØ
101693_UMPF-1.5-HL.pdf
UMPF-1.5-SH
tbc.
Port Frame Sample Holder
38.1mmØ/1.5inØ
tbc.
UMPF-2.0
100888
Port Frame
50.8mmØ/2.0inØ
100888_UMPF-2.0.pdf
UMPF-2.0-HL
102283
Port Frame Heavy Load
50.8mmØ/2.0inØ
tbc.
UMPF-2.0-SH
tbc.
Port Frame Sample Holder
50.8mmØ/2.0inØ
tbc.
UMPF-2.0/3.5
100890
Port Frame with Wide Ring
50.8mmØ/2.0inØ
tbc.
UMPF-2.5
100889
Port Frame
63.5mmØ/2.5inØ
100889_UMPF-2.5.pdf
UMPF-3.0
101292
Port Frame
76.2mmØ/3.0inØ
101292_UMPF-3.0.pdf
UMPF-3.0-SH
102433
Port Frame Sample Holder
76.2mmØ/3.0inØ
tbc.
UMPF-4.0
100938
Port Frame
101.6mmØ/4.0inØ
100938_UMPF-4.0.pdf
UMPF-5.0
100917
Port Frame
127mmØ/5.0inØ
100917_UMPF-5.0.pdf
UMPF-5.0-HL
102014
Port Frame Heavy Load
127mmØ/5.0inØ
tbc.
UMPF-5.0-SH
102539
Port Frame Sample Holder
127mmØ/5.0inØ
tbc.
[email protected]
14
UMPF-C Port Frame Caps
Port Frame Caps
Port frame caps are used to cover sphere ports during
transportation or while sphere is not in use. Port frame
caps are made by plastic material.
UMPF-C port frame cap
Specifications and Purchasing Information:
Model
Item No.
Description
Inner Cap Dia
UMPF-0.5-C
102870
Port Frame Cap for UMPF-0.5
xx mm
UMPF-1.0-C
102871
Port Frame Cap for UMPF-1.0 and UMPF-1.0-HL
xx mm
UMPF-1.5-C
102872
Port Frame Cap for UMPF-1.5 and UMPF-1.5-HL
xx mm
UMPF-1.5-SH-C
102873
Port Frame Cap for UMPF-1.5-SH
xx mm
UMPF-2.0-C
102874
Port Frame Cap for UMPF-2.0 and UMPF-2.0-HL
xx mm
UMPF-2.0-SH-C
102875
Port Frame Cap for UMPF-2.0-SH
xx mm
UMPF-2.0/3.5-C
102876
Port Frame Cap for UMPF-2.0/3.5
xx mm
UMPF-2.5-C
102877
Port Frame Cap for UMPF-2.5
xx mm
UMPF-3.0-C
102878
Port Frame Cap for UMPF-3.0
xx mm
UMPF-3.0-SH-C
102879
Port Frame Cap for UMPF-3.0-SH
xx mm
UMPF-4.0-C
102880
Port Frame Cap for UMPF-4.0
xx mm
UMPF-5.0-C
102881
Port Frame Cap for UMPF-5.0 and UMPF-5.0-HL
xx mm
UMPF-5.0-SH-C
102882
Port Frame Cap for UMPF-5.0-SH
xx mm
UMPF-6.0-C
102883
Port Frame Cap for UMPF-6.0
xx mm
UMPF-6.0-SH-C
102884
Port Frame Cap for UMPF-6.0-SH
xx mm
UMPF-10.0-C
102885
Port Frame Cap for UMPF-10.0
xx mm
UMPF-12.0-C
102886
Port Frame Cap for UMPF-12.0
xx mm
[email protected]
15
UMPP-K and UMPP-K-HL Port Plugs
Port Plugs
Port plugs are used to close unused sphere ports.
The inner surface of UMPP-K ports plugs is coated
with synthetic ODM98 material. Port plugs are fasten
to port frames.
Sphere Surface Level Port Plug
Port plugs supplied by Gigahertz-Optik GmbH close
the port at the inner surface level of the integrating
sphere to reduce shadow effects.
Port Plugs for UMPF Port Frames
UMPP-K port plugs are designed for use with UMPF
port frames. They mount onto the frame with three setscrews.
Port Plugs for UMPF-HL Port Frames
UMPP-K-HL port plugs are designed for use with
UMPF-HL port frames. They mount onto the frame
with three set-screws.
UMPP-K port plugs in different sizes
Sphere Surface
Plug Surface
Synthetic ODM98 Coating
The inner surface of the port plugs is coated with Gigahertz-Optik’s ODM98 material featuring same reflection characteristic than the UMBK and UMTK integrating spheres.
Custom Port-adapters
Port plugs can be machined to make custom design
port reducers or port adapters.
UMPP-K close the ports at sphere surface level
[email protected]
16
Specifications and Purchasing Information:
Model
Item No.
Port Plug for use with
Plug-Size
Specification
UMPP-0.5-K
100932-1
UMPF-0.5
12.7mmØ/0.5inØ
100932-1_UMPP-0.5.pdf
UMPP-1.0-K
100933-1
UMPF-1.0
25.4mmØ/1.0inØ
100933-1_UMPP-1.0.pdf
UMPP-1.0-HL-K
tbc.
UMPF-1.0-HL
25.4mmØ/1.0inØ
tbc.
UMPP-1.5-K
100934-1
UMPF-1.5
38.1mmØ/1.5inØ
100934-1_UMPP-1.5.pdf
UMPP-1.5-HL-K
102481-1
UMPF-1.5-HL
38.1mmØ/1.5inØ
102481-1_UMPP-1.5-HL.pdf
UMPP-1.5-SH-K
tbc.
UMPF-1.5-SH
38.1mmØ/1.5inØ
tbc.
UMPP-2.0-K
100935-1
UMPF-2.0
50.8mmØ/2.0inØ
100935-1_UMPP-2.0.pdf
UMPP-2.0-HL-K
102557-1
UMPF-2.0-HL
50.8mmØ/2.0inØ
102557-1_UMPP-2.0-HL.pdf
UMPP-2.0-SH-K
tbc.
UMPF-2.0-SH
50.8mmØ/2.0inØ
tbc.
UMPP-2.0/3.5-K
100951-1
UMPF-2.0/3.5
50.8mmØ/2.0inØ
100951-1_UMPP-2.0/3.5.pdf
UMPP-2.5-K
100936-1
UMPF-2.5
63.5mmØ/2.5inØ
100936-1_UMPP-2.5.pdf
UMPP-3.0-K
101293-1
UMPF-3.0
76.2mmØ/3.0inØ
101293-1_UMPP-3.0.pdf
UMPP-3.0-SH-K
102434-1
UMPF-3.0-SH
76.2mmØ/3.0inØ
102434-1_UMPP-3.0-SH.pdf
UMPP-4.0-K
100937-1
UMPF-4.0
101.6mmØ/4.0inØ
100937-1_UMPP-4.0.pdf
UMPP-5.0-K
100896-1
UMPF-5.0
127mmØ/5.0inØ
100896-1_UMPP-5.0.pdf
UMPP-5.0-HL-K
102815-1
UMPF-5.0-HL
127mmØ/5.0inØ
102815-1_UMPP-5.0-HL.pdf
UMPP-5.0-SH-K
102538-1
UMPF-5.0-SH
127mmØ/5.0inØ
102538-1_UMPP-5.0-SH.pdf
[email protected]
17
UMPR-K Port Reducers
Port Reducers Reduce Port Aperture Size
Port reducers are used to reduce port size to smaller
diameters than the free port.
Port Reducers Change Aperture Edge
Port reducers aperture edge can be specified with
straight or knife edge.
Port Reducers Change Port Aperture Shape
Port reducers are also used to change the port shape.
Most common are rectangular shapes but in principal
any machine able shape can be offered.
Port Reducers for UMPF Port Frames
UMPR-K port reducers are designed for use with
UMPF port frames. They mount onto the frame with
three set-screws. The reducers are machined out of
UMPP-K port plugs and are available for all port frame
sizes.
ISS-19P Integrating Sphere Source with UMPR-K Port
Reducer mount to Standard Port Frame.
Sphere Surface Level Port Reduction
The reflecting surface of the port reducers supplied by
Gigahertz-Optik GmbH reduce the port opening at the
surface level of the inner sphere to reduce shadow
effects.
Straight Edge Style
Knife Edge Style
Synthetic ODM98 Coating
Two edge versions are offered for UMPR-K
The inner surface of the port reducer is coated with
Gigahertz-Optik’s synthetic ODM98 material featuring
the same reflection characteristic than the ODM98
sphere coating.
Custom Size Aperture
Customers can specify the hole diameter in mm in 0.5
mm steps and the edge design. Different aperture
shapes than circular can be offered on request.
[email protected]
18
Specifications and Purchasing Information:
Model
Item No. Description
Max Aperture Specification
Diameter
UMPR-0.5-K
102904
Port Reducer for UMPF-0.5
8mm
100932-1_UMPP-0.5-K.pdf
UMPR-1.0-K
102905
Port Reducer for UMPF-1.0
21mm
102933-1_UMPP-1.0-K.pdf
UMPR-1.0-HL-K tbc.
Port Reducer for UMPF-1.0-HL
21mm
tbc.
UMPR-1.5-K
Port Reducer for UMPF-1.5
34mm
102934-1_UMPP-1.5-K.pdf
UMPR-1.5-HL-K 102908
Port Reducer for UMPF-1.5-HL
34mm
102481-1_UMPP-1.5-HL-K.pdf
UMPR-1.5-SH-K tbc.
Port Reducer for UMPF-1.5-SH
34mm
tbc.
UMPR-2.0-K
Port Reducer for UMPF-2.0
46mm
100935-1_UMPP-2.0-K.pdf
UMPR-2.0-HL-K 102911
Port Reducer for UMPF-2.0-HL
46mm
102557-1_UMPP-2.0-HL-K.pdf
UMPR-2.0-SH-K tbc.
Port Reducer for UMPF-2.0-SH
46mm
tbc.
UMPR-2.0/3.5-K 102913
Port Reducer for UMPF-2.0/3.5
46mm
100951-1_UMPP-2.0/3.5-K.pdf
UMPR-2.5-K
102914
Port Reducer for UMPF-2.5
59mm
100936-1_UMPP-2.5-K.pdf
UMPR-3.0-K
102915
Port Reducer for UMPF-3.0
72mm
101293-1_UMPP-3.0-K.pdf
UMPR-3.0-SH-K 102916
Port Reducer for UMPF-3.0-SH
72mm
102434-1_UMPP-3.0-SH-K.pdf
UMPR-3.0-SH50-CIE127
102436
Port Reducer for UMPF-3.0.
50mm diameter CIE127 conform
aperture for effective luminous flux
measurement
-
102436_UMPR-3.0-SH-50CIE127
UMPR-4.0-K
102917
Port Reducer for UMPF-4.0
97mm
100937-1_UMPP-4.0-K.pdf
UMPR-5.0-K
102918
Port Reducer for UMPF-5.0
123mm
100896_UMPP-5.0-K.pdf
UMPR-5.0-HL-K 102919
Port Reducer for UMPF-5.0-HL
123mm
102815-1_UMPP-5.0-HL-K.pdf
UMPR-5.0-SH-K 102920
Port Reducer for UMPF-5.0-SH
123mm
102538-1_UMPP-5.0-SH-K.pdf
102907
102910
[email protected]
19
UMPR-C Port Reducer Caps
Port Reducer Caps
Port reducer caps are used to cover sphere ports with
mounted port reducer during transportation or while
sphere is not in use. Port reducer caps are made by
plastic material.
UMPR-C port frame cap
Specifications and Purchasing Information:
Model
Item No.
Description
Inner Cap Dia
UMPR-0.5-C
102887
Port Reducer Cap for UMPR-0.5
xx mm
UMPR-1.0-C
102888
Port Reducer Cap for UMPR-1.0 and UMPF-1.0-HL
xx mm
UMPR-1.5-C
102889
Port Reducer Cap for UMPR-1.5 and UMPF-1.5-HL
xx mm
UMPR-1.5-SH-C
102890
Port Reducer Cap for UMPR-1.5-SH
xx mm
UMPR-2.0-C
102891
Port Reducer Cap for UMPR-2.0 and UMPF-2.0-HL
xx mm
UMPR-2.0-SH-C
102892
Port Reducer Cap for UMPR-2.0-SH
xx mm
UMPR-2.0/3.5-C
102893
Port Reducer Cap for UMPR-2.0/3.5
xx mm
UMPR-2.5-C
102894
Port Reducer Cap for UMPR-2.5
xx mm
UMPR-3.0-C
102895
Port Reducer Cap for UMPR-3.0
xx mm
UMPR-3.0-SH-C
102896
Port Reducer Cap for UMPR-3.0-SH
xx mm
UMPR-4.0-C
102897
Port Reducer Cap for UMPR-4.0
xx mm
UMPR-5.0-C
102898
Port Reducer Cap for UMPR-5.0 and UMPF-5.0-HL
xx mm
UMPR-5.0-SH-C
102899
Port Reducer Cap for UMPR-5.0-SH
xx mm
UMPR-6.0-C
102900
Port Reducer Cap for UMPF-6.0
xx mm
UMPR-6.0-SH-C
102901
Port Reducer Cap for UMPF-6.0-SH
xx mm
UMPR-10.0-C
102902
Port Reducer Cap for UMPF-10.0
xx mm
[email protected]
20
UMMP Machined Ports
Low Profile Machined Ports
For applications where a standard port frame is not
useful because the height of the port frame is too high
machined ports may be an alternative. These ports are
machined directly into the UMBK or UMTK sphere
housing forming a low profile stepped lip around the
port hole. Machined ports are custom made. Please
contact the factory for personal assistance.
Machined Ports with Protective Cap
The machined port is designed with a internal step
which accepts a plastic cap to close the port when the
sphere is not in use.
Machined Ports with Knife Edge
Machining of UMMP Port for use with Protection Cap
Knife edge design ports prevent stray light from
bouncing off the port edge and entering the sphere.
The sharpest knife edge is achieved using machined
ports without an internal step. The knife edge angle at
ODM98 coated spheres is limited by the ODM98 material thickness. For shipment the port is covered with
a thin plate taped onto it.
UMMP with step for protection cap
UMMP with knife edge
[email protected]
21
Purchasing Information:
Model
Item No. Description
Specification
UMMP-xx
102036
Machined Port with Protection Cap. Diameter xx
needs to be specified
tbc.
UMMP-KE-xx
102903
Machined Port with Knife Edge. Without Protection tbc.
Cap. Diameter xx needs to be specified
[email protected]
22
UMDP Detector Ports
Mount for Light Meters
Gigahertz-Optik GmbH supplies detector ports to hold
its different kinds of light detectors and light meters it
manufactures.
Detector Port for 11 type Detectors
Series 11 type detectors such as the PD-11, VL-11
and TD-11 are most commonly used on integrating
spheres for measurement and monitoring. The complete detector port consists of a UMPF-0.5 port frame
and UMPA-0.5/11 port adapter. The port adapter can
be used with and without the UMPA-0.5/11-DR diffuser window.
Detector Ports for 37 and 45 type Detectors
UMPF-0.5 plus UMPA-0.5/11
Gigahertz-Optik’s light detectors in 37 and 45 type
housing can be mounted to integrating spheres using
the UMDP-37 and UMDP-45 detector ports.
Detector Port for Fiber Bundles and Detectors
Adapters are available to mount light guides or other
manufactures detector types to integrating spheres.
These can be found under Port Adapter. Please contact the factory for personal assistance.
Detector Ports with Baffle
The freedom in design for ODM98 coated baffles is
limited by the light permeability of this material which
requires a minimum thickness for it’s high reflectance.
Because of that Gigahertz-Optik has developed a
unique sandwich port baffle design with metal shielding between the two ODM98 layers. The UMPB-ZB
port baffles are supplied with UMPF-0.5 and UMPF1.0 port frame interfaces allowing the mount of UMPA0.5 and UMPA-1.0 port adapters to mount light meters
and fiber bundles. Please check UMPB-ZB in this
datasheet for more information.
UMPB-ZB-0.5 with UMPF-0.5 mount
[email protected]
23
Specifications and Purchasing Information:
Specification
For Use With
Model
Item No. Description
UMPF-0.5
UMPA-0.5/11
UMPA-0.5/11-RD
100886
100924
101291
Detector port configuration
Port frame
100886_UMPF-0.5.pdf
Port adapter
100924_UMPA-0.5/11.pdf
Optional diffuser window
PD-11
VL-11
TD-11
UFC-11
UMPB-ZB-0.5
UMPA-0.5/11
102456
100924
Detector port configuration
Port frame
102456_UMPB-ZB-0.5.pdf
Port adapter
100924_UMPA-0.5/11.pdf
PD-11
VL-11
TD-11
UFC-11
UMDP-37
100919
Detector port
100919_UMDP-37.pdf
37 type detectors
UMDP-45
100953
Detector port
100953_UMDP-45.pdf
45 type detectors
[email protected]
24
UMPB-ZB Port Baffles
Port Baffles Prohibit Direct Port Irradiation
Integrating spheres work through multiple internal diffuse reflection of the incoming light signal. The ports
should be arranged so that no light from any other port
or light source inside the sphere can reach the port
directly without multiple reflections. In practice this is
not always possible so baffles between ports and between light sources and ports are used to avoid direct
illumination.
Port Baffles with Synthetic ODM98 Coating
The freedom in design for ODM98 coated baffles is
limited by the light permeability of this material which
requires a minimum thickness for it’s high reflectance.
Because of that Gigahertz-Optik has developed a
unique sandwich port baffle design with metal shielding between two ODM98 layers. The UMPB-ZB port
baffles are supplied with UMPF-0.5 and UMPF-1.0
port frame interfaces allowing the mount of UMPA-0.5
and UMPA-1.0 port adapters.
UMPB-ZB-0.5 port baffle
In-Line Baffles with Synthetic ODM98 Coating
In-line baffles are used to baffle two ports in-line (180°)
orientated to each other. In-line baffles are discs made
by the synthetic material ODM98. The discs are hold
by several pillars around the disc which form the common nickname Spider Baffle.
Custom Baffle Design & Fabrication
UM series integrating spheres offer a lot of freedom in
configuration. Custom made baffles are available designed and fabricated based on end-user specifications assuming standard sphere principle guidelines
are followed.
UMPB-ZB mount in integrated
UMPB-IL-K in-line baffle
[email protected]
25
Specifications and Purchasing Information:
Model
Item No. Description For Use With Specification
UMPB-ZB-0.5
102456
Port baffle *) UMBK-150
UMBK-190
UMBK-280
UMTK-150
102456_UMPB-ZB-0.5.pdf
UMPB-ZB-1.0
102471
Port baffle *) UMBK-150
UMBK-190
UMBK-280
UMTK-150
102471_UMPB-ZB-1.0.pdf
UMPB-ZB-UMPB-ZB-1.3/16-24 102457
Port baffle *) UMBK-150
UMBK-190
UMBK-280
UMTK-150
102457_UMPB-ZB-UMPB-ZB1.3/16-24
UMPB-IL-K
Port baffle *) UMBP
UMTP
tbc.
tbc.
*) can only be purchased together with integrating sphere