File - Amphenol TCS

Transcription

File - Amphenol TCS

Amphenol-TCS
Connecting people and technology.
HD-Optyx™
Optical Interconnect Product Family
www.amphenol-tcs.com
Applications for HD-Optyx™

Board to board via backplane or front
access interconnect
• HD-Optyx blind mate connector for
daughtercard to backplane connection
• Backplane optical circuit
Discrete cables
Optical fiber shuffles and flex circuits
“Rigid” optical circuit packaging

Daughtercard jumper cables
• Connection between optical devices
and card edge
• Various combinations of single fiber
and ribbon interfaces
Backplane related cable interconnect
• Front panel and backplane access
• Interconnect within OEM’s system;
distributed applications can position
boxes remotely.
Ver 10 12/7/2005
© Amphenol, Corporation • All Rights Reserved
(2)
HD-Optyx™ Product Line Offering
Card to Card
(Parallel)
Interconnect
MT & SF 1.25
mm Ferrule
Carriers
Traditional Blind Mate Interconnect
Duplex Plug
Product
Bulkhead Products
Optional
electrical
tic
Ver
midplane
al c
Card to Card
(Orthogonal)
Interconnect
d
oar
it b
ircu
Midplane cutout
Vertical
connector
tal
on
riz
Ho
Ver 10 12/7/2005
(3)
cir
rd
oa
it b
cu
Horizontal
connector
Blind-mate Backplane Solution
duplex plug

scalable stiffener
guidance/latching

Modular approach.
Scalable 2 to 16+ carriers.
Highest density solution available
today.
Electrical backplane connectors
compatibility:
• Generous float
• Force management
scalable/interlocking
BP adapter
9 Rugged metal components.
9 1.25mm and MT ferrule support.
9 Leverage HD-Optyx™ ferrule and dust protection.
Ver 10 12/7/2005
(4)
Understanding
Force Management

Type 1
•
Spring-loaded connector rigidly held by external
latches or card screws
•
Force is always on the backplane
•
Simple to design
•
Very few parts
•
Requires no latching
•
Not generally a lot of float (but not always needed)
•
End-face force dependant on card position
3
2
1
Type 2
•
Spring-loaded connector rigidly held by
guidance/latch mechanisms
•
Force is still present on the backplane
•
Not generally a lot of float
•
End-face force dependant on card position
xf
x f-max
x w-max
Type 3 – HD-Optyx
•
Spring-loaded connector slidably mounted to a
housing
•
Force is relieved once the connection is made
•
Potentially complicated
•
Provides consistent optical endface force
•
Has a lot of float
Ver 10 12/7/2005
xw
kt
ks
kf
kw
xs
(5)
x s-max
Backplane Density Comparisons
HD-OptyxTM Backplane w/16 ferrules
1.75 fibers/mm (44.3 fibers/in)
Competition w/4 ferrules
1.02-1.18 fibers/mm (26-30 fibers/in)
*Comparison based on 12 fiber MT ferrule, higher and lower fiber count per ferrule available.
HD-Optyx™ backplane system is available in even numbers of ferrule
carriers: one MT or two 1.25mm ferrules per carrier
Ver 10 12/7/2005
(6)
Bulkhead Solution
Supports both snap and
screw attachment available
Intuitive push
button release
Supports both simplex
and duplex plugs

Duplex and simplex modules.

Tight pack configuration available for
even higher density.
9 Rugged metal components
9 1.25mm and MT ferrule support
Ver 10 12/7/2005
(7)
Bulkhead Density Comparisons
1.25mm ferrule based
MT* ferrule based
HD-OptyxTM duplex bulkhead TP
2.0 fibers/mm (51 fibers/in)
HD-OptyxTM duplex bulkhead TP
HD-OptyxTM duplex bulkhead
HD-OptyxTM duplex bulkhead
HD-OptyxTM simplex bulkhead TP
HD-OptyxTM simplex bulkhead TP
HD-OptyxTM simplex bulkhead
HD-OptyxTM simplex bulkhead
MTP/MPO quad
LC duplex
MTP/MPO simplex
LC simplex
*Comparison based on 12 fiber MT ferrule, higher
and lower fiber count per ferrule available.
Ver 10 12/7/2005
(8)
Parallel Board Blind Mate
Support for both parallel and
orthogonal (Matrix)
configurations.
Optional e
lectrical m
idplane
rd
boa
t
i
u
c
l cir
tica
r
e
V
Midplane cutout
Vertical
connector
tal
on
riz
o
H
rd
oa
it b
u
c
cir
9 1.25mm and MT ferrule support
Ver 10 12/7/2005
(9)
Horizontal
connector
HD-Optyx™ Duplex & Simplex Plug
9 1.25mm and MT ferrule support.
9 Unique eye safety, dust and ferrule protection.
9 Common to all HD-Optyx™ product line.
Duplex plug
2x MT’s or 4x 1.25mm, or 1x
MT and 2x 1.25mm ferrules
Simplex plug
1x MT or 2x
1.25mm ferrules
Ver 10 12/7/2005
(10)
Ver 10 12/7/2005
(11)
Fe
in rrul
ca isol es m
mb ate at
e
er d
Do
co ors
iso mpl ope
lat ete n
ed ly
ca in
mb
er
Do
aw ors
op ay f ope
ti c r o n
al m
su
r fa
ce
Pl
co ugs
re ntac mak
ma t,
e
in d o
se or
ale s
d
Shutter Door Sequence - Common to all solutions
Sequence
Ferrule Protection (Dramatic Illustration)
Plug door front after exposure to dust
No Shutter
With Shutter
• Fiber #12

Dramatic reduction in dust:
•

• Fiber #6
Experiment: exposed plugs to dust
inside standard chamber for 1 hr
then removed ferrules for inspection.
Results:
•
Reduced need for cleaning.
•
Reduced time for cleaning.
•
Reduced probability of surface
damage.
Ver 10 12/7/2005
• Fiber #1
(12)
MT Ferrule Carrier
•
Compatible with simplex and duplex
HD-Optyx™ plugs
•
Standard MT:
• MM, SM, SM low loss
• Up to 72 fiber possible

Crimp for
jacketed cable
Can use either bare or jacketed
ribbon
Rear dust protection
Ferrule type
Insertion loss
Return loss
1-12 fiber MM
≤0.75dB
≥25dB
24 fiber MM
≤1.0dB
≥25dB
1-12 fiber Standard SM
≤0.5dB
≥55dB
1-8 fiber High Performance SM
≤0.35dB
≥55dB
Ver 10 12/7/2005
(13)
Color identifier, 6
unique colors
SF (1.25 mm) Ferrule Carrier

Compatible with simplex and duplex HDOptyx™ plugs

Lower loss than MTs

900um and 1.6mm cable

Color identification
Ferrule type
Insertion loss
Return loss
Multimode
≤0.35dB
≥25dB
Singlemode
≤0.35dB
≥55dB
Tuned Singlemode
≤0.1dB
≥55dB
Ver 10 12/7/2005
(14)
General Accessories
9 Plug protectors
9 Dummy ferrule carriers
9 Modular BP adapter protectors
9 Installation and extraction
tooling
9 Cable directors
9 Carrier protectors
9 Manual cleaning kit
Cable guide
Ver 10 12/7/2005
(15)
Features & Benefits Summary

High Density, Low Cost Per Channel

MT and 1.25 Compatible

Best in Class Ferrule & Safety Protection

Robust, and Reliable

Force Isolation with Progressive Alignment
3
2

Flexible Configurations Reduce Time to Market

Testing & Qualification:
• Telcordia GR 1435
• GR 326
• Initial Mil Testing Underway
• Extreme Studies Demonstrate:
1
Force Sequencing on the Daughter Card

X & Y Float on Backplane, Z Float on
Daughter Card
Ability to Withstand Harsh Environments (i.e.
EMI/RFI isolation, shock, vibration, thermals,
contaminants)
Reliability beyond Specifications
A reduction in cleaning.
A reduction in ferrule damage.

Ver 10 12/7/2005

Arizona Road Dust
(16)
Additional Products
Ver 10 12/7/2005
(17)
Cabling
Connectors and Adapters
Patchcords and Pigtails
Ver 10 12/7/2005
Multi-fiber Cable Assemblies Fiber Management Systems
Node/Service Cables
(18)
Fiber Optic Attenuators
Cabling (Continued)
Connectorized Ribbon Arrays
Specialized Hybrid Adapters
Fiber Optic Couplers/Splitters
Ver 10 12/7/2005
(19)
Connector Types
A wide variety of standard optical connectors and cable assemblies
• SMA
• ST
• FC
• SC
• LC
• MT-RJ
• MTP
• LX.5
Ver 10 12/7/2005
(20)
Optical Flex Circuits

Cost effective means of managing
multiple fiber ribbons

Virtually any routing pattern can be
achieved

All materials are UL 94V-0 rated

Conforms to Telcordia GR-2866
Ver 10 12/7/2005
(21)
Ribbon Fiber Arrays

Fiber-to-optical chip interface

Pyrex or silicon V-Groove fiber array

1-48 Fiber Count on 250 or 127 micron pitch +/0.5 micron, 8 degree or flat polish

Ribbon fiber fan-out assembly

Designed into Telcordia GR-1221 approved
devices
Ver 10 12/7/2005
(22)
Military / Industrial
Ver 10 12/7/2005
(23)
For More Information Contact
Product Line Manager
Richard F. Roth
[email protected]
(603) 879-3294
Engineering Manager
John Lehman
[email protected]
(603) 879-3508
Ver 10 12/7/2005
(24)

File - Amphenol TCS

Transcription

Similar documents