Large Loops Copper Bracelet
Transcription
Large Loops Copper Bracelet
Large Loops Copper Bracelet Tutorial Link hammered rings together with knurled chain links to create an open, airy bracelet. Step One • To turn the chain into jump rings use your chain nose pliers to gently open each chain link and remove it from the chain. Continue until you have created 28 jump rings. Supplies: * 5 hammered rings, antique copper, 33 mm Step Two • With your chain nose pliers open the square jump ring and thread it through the lobster claw and one hammered ring. Close jump ring securely. * 28 medium knurled antique copper jump rings (You can create these jump rings by opening links of the medium knurled antique copper chain, this project uses approximately 11 inches of chain to create 28 jump rings) * 1 lobster claw clasp, antique copper, 7 x 14 mm * 1 square jump ring, antique copper, ¼ inch Step Three • With your chain nose pliers loop one knurled jump ring around two hammered rings. Close securely. Repeat until you have 7 knurled jump rings closed around the two hammered rings. Repeat to attach all hammered rings. Close bracelet by hooking lobster claw around one hammered ring as shown in step two. Tutorial copyright 2010 © Bedizen Ornaments, Inc. Tools: *Chain nose pliers www.ornamentea.com
Similar documents
a printable version of this tutorial
Using your chain nose pliers open a 5 mm jump ring and thread it through one of the small puffed heart charms and around the 16 inch leather strand. Repeat to attach the remaining puffed heart char...
More information