Product Brochure
Transcription
Product Brochure
Certified and Approved -40 ˚C/˚F Certified, Approved Valves You Can Trust VCI - Industrial Ball Valves VCI - Steam Ball Valves VCI brand name products offer a line of specialty two and three-piece ball valves and automation packages. Valves are manufactured to sizes of up to 12” and are comprised of a selection of available materials including carbon steel, stainless steel & all exotic alloys. VCI products offer cost effective, reliable solutions through advanced engineering, design and production quality programs. Valves operate with pressures up to 6000 psig, and various available end connections such as; Flanged, NPT, BWE, SWE , BWO, TC and Hub style. Products include 2-way to 5-way, Steam Trap Testing and Blow-down valves, and a complete line of Hygienic, Cryogenic, Steam etc. service valves. Complete valve automation capabilities. Certifications of and with API-607 Fire Safe, ULC, CSA, FM Global for LP, LP Gas, Natural Gas, NH3 etc. combustible fuels: to better serve our customers. VCI brand steam service ball valves for the general industry. Available from ¼” to 12”. VCI - CSA & FM Global Certified: Automatic Emergency Safety Shut-Off units. VCI “better by design” brand of manual and fully actuated safety shut-off valves of ¼” to 8” sizes and in NPT, SW & RF Flanged connections. Products tested successfully certified with the temperature range of -40 Deg. C (-40 Deg. F ) to + 65 Deg. C (+149 Deg. F ) CSA Certified Products: Class 3371 03, 04, 10, 83, 84, 94 sizes of ¼” to 6” Applicable: CSA 6.5 & CSA 6.5a- 2001 ANSI Z 21.2 & 2a CSA 6.5b-2004 ANSI Z 21.21b & CSA 6.5-2005 ANSI Z21.21-2005 CAN / CGA -3.16-M88, ASME B16.33-2002 & B16.38-1990 CGA IR No. 60 & CGA 3.9-M94 FM Certified Products: Approval Standard Class # 7412 sizes of ¼” to 8” • Two, three and four way valves • Steam Trap Tester and Block & Bleed ¼ turn valves • Temperatures to +1,000 Deg. F. • Fire Safe Certified to API 607. • Industrial and High Purity Steam ball valves. • Connections available in NPT, SW, BW, BWO, TC & RF Flanged to ANSI Class 900 # Class. • Full automation available. Guide Valve Limited FACE - Butterfly Valves Face designs and builds a wide range of standard and customized valves to suit customer needs. Specializing in Butterfly Valves, Face also offers square or rectangular valves. Guillotine Dampers and Multi-Louver Dampers are available and valves are manufactured to sizes of up to 144” with temperatures of up to 2,000 Deg. F and pressures up to 2,500 psi. LOWE VALVE - VCI F200K - Metal Seated quarter turn valves Manufactured in North America the Lowe Valve was a patented valve product. This design offers a unique quarter turn rotary wedge action, metal–to-metal seated valve which provides bubble tight shut-off performance. Features such as non-lubricated, low torque, quarter turn operation, multiple wear compensation adjustments, back seating and economical quarter turn actuator compatibility are an integral part of this valve. The Lowe Valve is a highly competitive and proven high pressure, high temperature valve to +1,000 Deg. F. Available in Forged Carbon Steel and Stainless Steel construction with Threaded, Socket-Weld, Butt-Weld or Flanged Ends to ANSI class 900 # and to sizes of 2”. VCI-F200K Metal seated ball valve in ½” to 12” Class 150 & 300 # ANSI RF Flanged, Full ported, split body style with temperature to +600 Deg. F. VCI - Cryogenic Ball Valves SIRCA – Pneumatic Rack & Pinion Actuators SIRCA’s Series “S” Double & Spring Return, Pneumatic Rack & Pinion Actuators provide excellence in standards of safety, reliability, and value. Rack & Pinion Actuators are designed to operate “Quarter-Turn Valves”. The wide torque range capabilities ensure that our units are more than suitable for Ball, Plug, and Butterfly Valve applications. Upon review of our products’ standard-supplied features and benefits as well as design specifications you will find that the SIRCA Series “S” offers one of the best valve actuators in the industry. VCI brand cryogenic ball valves for the general industry. Two models available for -190 Deg. F & -320 Deg. F. Available in sizes of ¼” to 8” in NPT, SW, RF Flanged and in ANSI Class to 600 # ratings. Valves are available in full cryogenic stem extensions and also without stem extension for intermittent cryogenic service. Cryogenic installations requiring fail safe operation or automatic control: VCI has the pneumatic & electric controls for your requirements. We are the manufacturers of the name brand products of: GVS, VCI, LOWE & FACE E-mail: [email protected] • www.gvs-vci.com Toll Free in Canada & U.S.A.: 1-888-824-5693 09-2012 Product Brochure Guide Valve Limited Guide Valve Limited established in 1981 specializes in the manufacturing, representation and servicing of valves and valve actuators. Our unique diversification enables us to provide our client base with effective quality products. A summary of our product profile is detailed in the following pages…… GVS brand named products are based on the most advanced technologies and are used in all sectors from petro-chemical refining and processing to transportation and distribution of the end product. GVS valves are designed, manufactured & tested according to API 6 D & CSA Z 245.15. Our standard product design of series B1 & GB1 are of the Trunnion mounted, bolted body type ball valves of Double Piston Effect (DIB) with our unique Protector/Scraper double soft seat seal feature . SCHUCK: WELDED BODY BALL VALVES DELLA FOGLIA: LNG CRYOGENIC BALL VALVES Schuck all welded body trunnion mounted ball valve designs are suitable for use with various medias such as: Natural Gas, Acid Gas, Oil, Water etc. To serve an established, demanding industry, Schuck provides variance in both their ball valves designs and features. These fully welded body type ball valves are designed and manufactured in a range of sizes from ½” to 60” and with operating pressure capabilities of up to class 1500 # ANSI . Each valve is made to be maintenance free through sealing and bearing technologies, low weight for ease of installation and transport. Cryogenic valves are available in Floating and Trunnion Mounted designed for cryogenic applications, down to -196 Deg. C. These valves are equipped with an extended bonnet to allow for vapor space between the body cavity and stem seal, and specially engineered seals to ensure tightness throughout the whole operating range. The design of Della Foglia Cryogenic Valves allow for them to be manufactured in sizes from 1/2” to 60” and with pressure classes 150 to 2500 # ANSI in accordance with API 6D, ISO 17292, ASME B16.34, and ASME VII. Available are three advanced sealing systems for valves approved to operate within the temperature range of -60 Deg. C to +200 Deg. C. Fire Safe Certified This seat feature was developed to assure a superior seat to ball soft seat shut-off performance and longevity of in-service life. GVS series B1 & GB1 Available in sizes of 2” to 32” (36” regular ported) Soft Seated ANSI Class rating of 150 to 2500 #. Fire Safe Certified to: API 607 Fifth Edition API 6FA Edition 1999 BS 6755: Part. 2 SCHUCK: NOZZEL CHECK VALVE DELLA FOGLIA: METAL SEATED BALL VALVES Most commonly used with gas applications, Nozzel (Jet Control) Check Valves are used to stop a return of flow. Schuck’s design enables it to self-adjust itself to the flow speed allowing for an abundance of added benefits such as: trouble free and low-wear operation, low noise emission and avoidance of foreign debris deposits in the valve. For added safety and security, Schuck’s check valves use a sealing system of primarily metal-to-metal and secondarily soft seated. These valves can be mounted both horizontally and vertically and can have different trims and lengths. Available 1” to 48” sizes and in ANSI Class 150 to 2500 # ANSI. Metal Seated Valves are typically used in applications with abrasive/corrosive materials or exposure to very high temperatures. Della Foglia manufactures metal seated valves in both Trunnion Mounted and Floating Ball designs in sizes from ½” to 60”and pressure ranges from classes 150 to 2500 # ANSI. This high quality product is designed in accordance with ASME VIII or ASME B16.34 and is manufactured and tested to the standards of: API 6D, ISO 15848, and API 598. Available in sizes 2” to 16” Metal to Metal Seated & ANSI Class rating of 150 to 900 #. Fire Safe Certified LIVE FIRE SAFE TESTING MAX TEMP +220°C MAX TEMP +350°C SCHUCK: INSULATION, EXPANSION MONOLITHIC JOINTS / COMPENSATORS DELLA FOGLIA: OFFSHORE PLATFORM DOUBLE BALL VALVES & SUB SEA BALL VALVES Available in fully welded construction and from 1” to 48” sizes and up to ANSI class 1500 # ratings. The Schuck patented annular gap feature does not allow for the possibility of the danger for Carbonisation or burn off which a “point-type” design may cause to occur. Integrated OTB tested, patent annular breakdown voltage (Patent No. 389367) Double Ball Valves are available in Floating and Trunnion Mounted with options in body construction such as: one-piece forged body side entry (cartridge type), bolted body, and fully welded body. A center bleed port between the valves allows for valve performance testing and provides a “double block & bleed” feature with maximum safety. Standard features and options include designs in accordance with API 6D, ISO 17292 and ASME B16.34, sizes from ½” to 36”, ANSI classes 150 to 2500 #, anti-blow-out stem and antistatic design. Available in many exotic alloys. Temperature range: -45 Deg. C to +150 Deg. C. Internal and external coatings to clients specifications. Fire Safe Certified Fire Safe Certified