P16 Sales Gresen

Transcription

P16 Sales Gresen

Series P16
Series Description
Page
P16 - Standard Pump ........................181 - 184
FEATURES:
• Available in various
configurations
TP16-2
- Tandem, 2 Place ............185 - 188
• Cast iron pumping sections for durability
TP16-3
- Tandem, 3 Place ............189 - 192
PVP16
- Priority Valve Gear ..........193 - 197
• Aluminum flanges and covers for
optimum power to weight ratio.
• Journal bearings for long life and
good over-hung load capability
• Buna-N Seals are standards for
petroleum and glycol based fluids
“Viton” seals are optional.
• Pressure balanced plates for greater
efficiency.
Series 20
CP16
- Clutch Option ......................199 - 202
DP16
- Dump Pump Option ............203 - 206
Series Description
GRESEN® SERIES
Gear Pumps & Motors
®
Page
20 - Standard Pump ............................207 - 209
FEATURES:
• Available in various
configurations
• Construction:
Aluminum - For excellent power to
weight ratio or Cast iron - for extra
durability.
• Journal bearings for long life and
good over-hung load capability
• Buna-N Seals are standards for
petroleum and glycol based fluids
“Viton” seals are optional.
• Pressure balanced plates for greater
efficiency.
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
R20
- Reversible Pump......................211 - 214
M20
- Motor ......................................215 - 217
TP20-2
- Tandem, 2 Place ............219 - 221
TP20-3
- Tandem, 3 Place ............223 - 226
NST20
- Flow Sensitive ..................227 - 230
NSD20
- Flow Sensitive..................231 - 234
NDS20
- Pressure Summation ......235 - 238
SPM20
- Two-Speed ......................239 - 241
SALES OFFICE HOURS
8 A.M. TO 8 P.M. EASTERN TIME
www.herculeshydraulics.com
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
157
GRESEN® SERIES
158
Gear Pumps & Motors
Pump and Motor Displacement Chart
UNIT
SIZE
P1-10
P1-15
P1-20
P1-25
(2)P1-30
DISPLACEMENT
U.S. GPR
CIR
LPR
.000886
.2047 .00335
.001330
.3072 .00503
.001773
.4096 .00671
.002216
.5119 .00838
.002955
.6826
.01119
1200
1.06
1.60
2.13
2.70
3.55
1800
1.59
2.39
3.19
3.99
5.32
DISPLACEMENT IN GPM AT SPEEDS INDICATED
1900
2000
2100
2200
2300
2400
1.68
1.77
1.86
1.95
2.04
2.13
2.53
2.66
2.79
2.93
3.06
3.19
3.37
3.55
3.72
3.90
4.08
4.25
4.21
4.43
4.65
4.87
5.10
5.32
5.61
5.91
6.21
6.50
6.80
7.09
2500
2.21
3.32
4.43
5.54
7.39
P12-17
P12-22
P12-28
P12-34
P12-40
P12-45
.0014
.0019
.0024
.0030
.0034
.0039
.333
.433
.554
.683
.794
.905
.0055
.0073
.0091
.0112
.0130
.0148
1000
1.40
1.90
2.40
3.00
3.40
3.90
1200
1.68
2.28
2.88
3.60
4.08
4.68
1800
2.52
3.42
4.32
5.40
6.12
7.02
2000
2.80
3.80
4.80
6.00
6.80
7.80
2200
3.08
4.18
5.28
6.60
7.48
8.58
2400
3.36
4.56
5.76
7.20
8.16
9.36
2600
3.64
4.94
6.24
7.80
8.84
10.14
2800
3.92
5.32
6.72
8.40
9.52
10.92
3000
4.20
5.70
7.20
9.00
10.20
11.70
P14-42
P14-59
P14-74
P14-91
P14-108
.0035
.0049
.0062
.0076
.0090
.808
1.132
1.432
1.756
2.079
.0132
.0185
.0235
.0288
.0341
3.50
4.90
6.20
7.60
9.00
4.20
5.88
7.44
9.12
10.80
6.30
8.82
11.16
13.68
16.20
7.00
9.80
12.40
15.20
18.00
7.70
10.78
13.64
16.72
19.80
8.40
11.76
14.88
18.24
21.60
9.10
12.74
16.12
19.76
23.40
9.80
13.72
17.36
21.28
25.20
10.50
14.70
18.60
22.80
27.00
P2-45
P2-65
P2-85
P2-95
(2)P2-105
P2-115
P2-150
P2-200
.00397
.00561
.00728
.00817
.00872
.0100
.01328
.0169
.918
1.296
1.681
1.887
2.014
2.31
3.090
3.904
.01503
.02123
.02755
.03092
.03301
.03785
.05026
.06396
1200
4.76
6.73
8.73
9.80
10.46
12.00
15.70
20.30
1800
7.15
10.10
13.10
14.70
15.70
18.00
23.60
30.40
1900
7.55
10.67
13.82
15.50
16.57
19.00
24.90
32.10
2000
7.95
11.22
14.57
16.34
17.44
20.00
26.20
33.80
2100
8.34
11.79
15.29
17.13
18.31
21.00
17.60
35.50
2200
8.74
12.35
16.00
17.95
19.18
22.00
28.80
37.20
2300
9.14
12.91
16.75
18.75
20.06
23.00
30.20
38.90
2400
9.54
13.47
17.48
19.60
20.93
24.00
31.50
40.50
2500
9.94
14.02
18.20
20.40
21.80
25.00
32.80
42.20
P16-45
P16-65
P16-85
P16-100
P16-115
P16-150
P16-180
P16-200
P16-250
.0038
.0055
.0072
.0085
.0097
.0127
.0152
.0169
.0211
.878
1.270
1.663
1.964
2.241
2.934
3.511
3.902
4.874
.0144
.0208
.0273
.0321
.0367
.0481
.0575
.0639
.0798
1000
3.80
5.55
7.20
8.50
9.70
12.70
15.20
16.69
21.10
1200
4.56
6.66
8.64
10.20
11.64
15.24
18.24
20.28
25.32
1800
6.84
9.90
12.96
15.30
17.46
22.86
27.36
30.42
37.98
2000
7.60
11.00
14.40
17.00
19.40
25.40
30.40
33.80
42.20
2200
8.36
12.10
15.84
18.70
21.34
27.94
33.44
37.18
46.42
2400
9.12
13.20
17.28
20.40
23.28
30.48
36.48
40.56
50.64
2600
9.88
14.30
18.72
22.10
25.22
33.02
(4)
(4)
(4)
2800
10.64
15.40
20.16
23.80
27.16
35.56
(4)
(4)
(4)
3000
11.40
16.50
21.60
25.50
29.10
(3)
(4)
(4)
(4)
P6-060
P6-080
P6-100
P6-120
P6-150
.0052
.0070
.0087
.0105
.0131
1.201
1.617
2.010
2.426
3.026
.01968
.02650
.03293
.03974
.04958
1200
6.24
8.40
10.49
12.60
15.72
1800
9.36
12.60
15.65
18.90
23.58
1900
9.88
13.30
16.53
19.95
24.89
2000
10.40
14.00
17.40
21.00
26.20
2100
10.92
14.70
18.27
22.05
27.51
2200
11.44
15.40
19.14
23.10
28.82
2300
11.96
16.10
20.01
24.15
30.13
2400
12.48
16.80
20.88
25.20
31.44
2500
13.00
17.50
21.75
26.25
32.75
PM23-13
PM23-16
PM23-19
PM23-22
PM23-25
PM23-28
PM23-31
.0109
.0137
.0164
.0192
.0219
.0247
.0274
2.518
3.165
3.788
4.435
5.059
5.706
6.329
.0413
.0519
.0621
.0727
.0829
.0935
.1037
1000
10.90
13.70
16.40
19.20
21.90
24.70
27.40
1200
13.08
16.44
19.68
23.04
26.28
29.64
32.88
1400
15.26
19.18
22.96
26.88
30.66
34.58
38.36
1600
17.44
21.92
26.24
30.72
35.04
39.52
43.84
1800
19.62
24.66
29.52
34.56
39.42
44.46
49.32
2000
21.80
27.40
32.80
38.40
43.80
49.40
54.80
2200
23.98
30.14
36.08
42.24
48.18
54.34
60.28
2400
26.16
32.88
39.36
46.08
52.56
59.28
65.76
2500
27.25
34.25
41.00
48.00
54.75
61.75
68.50
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
GRESEN® INFORMATION
Gear Pumps & Motors
GENERAL PRODUCT
AND SAFETY INFORMATION
INTENDED USE OF THESE PRODUCTS
!
WARNING
WARNING: The Pumps and motors in this catalog are designed for, and intended for use, only on mobile equipment hydraulic systems. Use of
these pumps and motors or other applications will void the warranty, as such use may also result in damage to the pump and motor, or to other
equipment in the system.
In some cases, use for unapproved applications could result in serious bodily injury from an equipment failure. In order to avoid property damage
or bodily injury, do not use these pumps and motors for other applications.
CONSIDERATIONS FOR MAXIMUM PRODUCT LIFE AND PERFORMANCE
Things to be considered include, but are not limited to:
■ fluid type and cleanliness.
■ system flow and pressure requirements (including pressure spikes)
■ adequate port and plumbing sizes.
■ reservoir size and location.
■ operating temperature.
■ integrated system valving.
■ duty cycle.
■ operating speeds.
HYDRAULIC OIL REQUIREMENTS
To obtain maximum life of gresen pumps and motors, the hydraulic fluid must meet or exceed the specifications shown on page 142.
!
CAUTION
CAUTION: Failure to use fluids that meet these specifications can shorten the life of the pump and/or motor, and result in failure. A failure due to
the use of improper fluids, may in some instances result in damage to other items in the hydraulic circuit. Such failures will not be covered by
warranty.
Clean oil is important and we recommend at least a minimal 10 micron return filter, properly sized for the system and maintained on a regular
service schedule to a minimum ISO cleanliness level of 17/14.
Gresen pumps and motors work well on most fire resistant fluids, but because some of these fluids require special seals, these applications
should be approved in advance by Gresen Pump Engineering.
!
WARNING
!
WARNING
WARNING: Improperly installed or maintained pumps and motors, and their connections, could result in external leakage, which may cause
property damage or serious bodily injury. In order to avoid such damage or injury, you should carefully follow all installation and maintenance
instructions which accompany the product.
WARNING: When using those items that may require tapping into the vehicle air brake system (e.g., pneumatic controls for “air cylinders” on Dry
Valve Pumps or “air shifters” on Dump Pumps) a “Pressure Protection Valve” (our part number 16393) or the equivalent) should be used. In the
event of a failure in the air cylinder, air shifter, or their control lines, a Pressure Protection Valve will prevent the loss of air from the vehicle brake
circuit. Loss of air from the vehicle brake circuit could cause loss of control of the vehicle, which could result in serious injury or death.
BUILDERS AND REBUILDERS
!
CAUTION
CAUTION: For those who are authorized to build and rebuild Gresen gear pumps and motors, the tolerances on new parts require that a pump
or motor be assembled and “run-in” according to a specific procedure. This should be done on a test stand with proper filtration rather than on
the application, as the run-in procedure will generate metallic particles, which if not caught, may cause damage throughout the system.
If there are any questions or clarifications required, please contact:
Hercules Hydraulics Component Division
Phone Toll Free in the U.S. at 1-800-333-5617
160
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
Assembly Torque Values
Overhung Load Data
NOTES:
A
All torque values are based on a lubricated condition. If
capscrews and/or nuts are dirty, they must be washed,
blown dry, and re-oiled prior to installation. Al studs must
be washed and blown dry–DO NOT re-oil.
The following torque values are to be used in the assembly
of pumps and motors:
SERIES
SIZE
P1
P12
P14, FP14, TFP14
SSFP14
P2
P16, HP16
FPR16
FP16
TFP16
SSFP16
DP16
DP16 (valve)
FP17
20, M20, FP20
P6, FM6, TM6
25, M25, FP25
FP257, FPW257
HP7, HM7, FP7
SL7
HP8, HM8, FP8, SL8
PM23
DPH
HILLSDALE
HILLSDALE
T101/102
MGG/PGG (body)
MGG/PGG (flange)
5/16"
TORQUE
(FT.-LBS.)
20-25
20-25
30-35
80-90
30-35
70-75
80-90
160-175
160-175
160-175
70-75
30-35
18-20
80-90
80-90
160-175
160-175
240-250
160-175
240-250
180-190
180-190
40-45
50-55
195-200
21-24
46-54 (in.-lb.)
M10
3/8"
1/2"
3/8"
1/2"
1/2"
5/8"
5/8"
5/8"
1/2"
3/8"
5/16"
1/2"
1/2"
5/8"
5/8"
3/4"
5/8"
3/4"
5/8"
5/8"
3/8"
7/16"
5/8"
5/16"
#10
NOTES:
For “Mixed” Series, ie: TP25450-20200-P14-45A, use torque values corresponding to each section: 25 Series for the 25450 (160175), 20 Series for the 20200 (80-90), and P14 Series for the
P14-45 (30-35). Verify stud/capscrew sizes.
Torque value should be divided into two or three equal values, and
applied in stages. e.g. P16 should be first torqued to 35 ft. lbs.
then torqued to the final value of 70-75 ft. lbs.
While torquing the pump please follow pattern as shown below:
1
Dim. “A”
1.00"
”
”
”
”
”
1.00"
”
”
”
”
1.00"
”
”
”
”
”
”
”
1.50"
”
”
”
”
”
”
1.50"
”
”
”
”
1.50"
1.50"
Allowable
Load “L”
100 Lbs..
”
”
”
”
”
200 Lbs..
”
”
”
”
390 Lbs..
”
”
”
”
”
”
”
1050 Lbs..
”
”
”
”
”
”
1050 Lbs..
”
”
”
”
1300 Lbs..
1300 Lbs..
Allowable
Operating Pressure
2000 PSI
”
”
”
”
”
2000 PSI
”
”
”
”
2200 PSI
2200 PSI
2100 PSI
2100 PSI
2000 PSI
1800 PSI
1700 PSI
1600 PSI
2000 PSI
”
”
”
”
”
”
1800 PSI
1600 PSI
1350 PSI
1150 PSI
900 PSI
3000 PSI
2800 PSI
Allowable Load “L” must not be exceeded.
5
8
3
1
4
7
3
6
PUMP
SIZE
P12-17
-22
-28
-34
-40
-45
P14-42
-59
-74
-91
-108
P16-45
-65
-85
-100
-115
-150
-180
-200
20150
20200
20250
20300
20350
20400
20450
25500
25550
25600
25770
25950
HP7
HP8
GRESEN® SERIES
Gear Pumps & Motors
®
4
2
When Belt Drive is used, “L” must include both belt pre-tension and torque load.
2
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
161
ntertech Cylinders, Pumps & Motors / Custom Hoists / LHA
Accessories / Cylinders / Prince Cylinders & Pumps / Chief
Cylinders / Perfection Pumps / White Motors / Gresen®
Cylinders, Pumps, Motors & Valves / Commercial Intertech
Cylinders, Pumps & Motors / Custom Hoists / LHA Accessories
Cylinders / Prince Cylinders & Pumps / Chief Cylinders /
Perfection Pumps / White Motors / Gresen® Cylinders, Pumps,
Motors & Valves / Commercial Intertech Cylinders, Pumps &
Motors / Custom Hoists / LHA Accessories / Cylinders / Prince
Cylinders & Pumps / Chief Cylinders / Perfection Pumps / White
Motors / Gresen® Cylinders, Pumps, Motors & Valves /
Commercial Intertech Cylinders, Pumps & Motors / Custom
Hoists / LHA Accessories / Cylinders / Prince Cylinders &
Pumps / Chief Cylinders / Perfection Pumps / White Motors /
Gresen® Cylinders, Pumps, Motors & Valves / Commercial
®
Description. . . . . . . . . . . . . . . . . . . . . Gear Pumps
Flow Range . . . . . . . . . . . . . . . . . . . . TO 38 GPM
Displacements . . . . . . . . . . . . . . . TO 3.904 C.I.R.
GRESEN® - P16
Series P16
Maximum Pressure to . . . . . . . . . . . . . . . 3000 PSI
Maximum Speed to. . . . . . . . . . . . . . . . 3600 RPM
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . A or C
Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . Journal
Series P16
Construction . . . . . . . . . . Cast Iron Gear Plate with
Aluminum Flange and Cover Plate
Performance Data
DISPLACEMENT/REVOLUTION
(Theoretical)
PUMP
SIZES
MAXIMUM
PRESSURE
MAXIMUM
SPEED
US
Gallons
Cubic
Inches
Liters
Cubic
Centimeters
Imperial
Gallons
PSI
BAR
RPM
P16 - 45
.0038
.878
.0144
14.388
.0031
3000
207
3600
P16 - 65
.0055
1.270
.0208
20.812
.0045
3000
207
3600
P16 - 85
.0072
1.663
.0273
27.252
.0059
3000
207
3400
P16 - 100
.0085
1.964
.0321
32.184
.0070
3000
207
3300
P16 - 115
.0097
2.241
.0367
36.723
.0080
3000
207
3100
P16 - 150
.0127
2.934
.0481
48.080
.0105
3000
207
2800
P16 - 180
.0152
3.511
.0575
57.535
.0126
2200
152
2500
P16 - 200
.0169
3.902
.0639
63.942
.0140
2000
138
2200
All data based on SAE 10W oil at 150˚F.
Available with Viton Seals for use with phosphate ester base fluids.
How To Order
‘A’ denotes counterclockwise rotation
‘C’ denotes clockwise rotation
When viewed from drive shaft end
Rotation
Pump Size
Shaft
Flange
Cover Plate
Series
P16-115A - 2N3
Note: Add prefix ‘V’ to pump model number (VP16-) when ordering pumps with Viton Seals for use with phosphate ester base fluids.
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
181
GRESEN® - P16
Series P16
Shafts Available
1
5/8" Dia. 9 Tooth Spline
Flat Root Side Fit
2
Torque Limit 52 Lbs. Ft.
Major
Dia.
.75
.72
Flat Root Side Fit
Full Spine
.608
.603
Major
Dia.
Flg. Mtg.
Surface
1.25-'D'
1.12-'F'
1.32-'N'
1.56
1.44
1.69
1.64
Flanges
Spline Data
Diametral Pitch . . . . . . . 16/32
Pressure Angle . . . . . . . . . 30°
No. Of Teeth . . . . . . . . . . . . . 9
Minor Dia. . . . . . . . . .472-.483
Pressure Angle . . . . . . . . . 30°
No. Of Teeth . . . . . . . . . . . . 13
Minor Dia. . . . . . . . . .722-.733
6
1/4" x 1/4" x 1-1/2" Lg. Key
.875
.874
.982
Flange Mtg.
Surface
1.19 Full
1.16 Spline
7/8" Straight Shaft
7/8" Straight Shaft for
Piggy-Back
'D' Flange
'F' Flange
'J' 'E' & 'G' Flanges
'N' Flange
.8585
.8535
Spline Data
5
3
.06
1.19
.25
3/4" Straight Shaft
9
Flg Mtg
Surface
'N' Flange
1.89
7/8" Tapered Shaft
1/4" x 1/4" x 1-3/4" Lg. Key
5/32" x 5/8" Woodruff Key
.982
.875
.874
.25
.849
.829
3/16" x 3/16" x 1-1/4" Lg. Key
Dia.
.832 .749.Dia.
.748
.06
1.50
Flange
Mounting
Surface
2.38 'D' Flange
2.25 'F' Flange
2.50 'J' & 'E
.846
.836
1.62
1.81 'F' Flange
1.94 'D' Flange
2.01 'N' Flange
Flanges
2.45 'N' Flange
Gage Line
.6328
.6298
.875
.873
7°8'
Flange
Mounting
Surface
Flange
Mounting
Surface
2.30
Flanges Available
D
SAE ‘A’ 2-Bolt
1.43 R
F
7/16" Wide
Mounting
Slots
Pad Mount
1.43 R
1.65
1.65
3.250 Pilot
3.248 Dia.
2.00
1/2-13NC
Depth 1.00
2 Places
2.094
1.88 R
4.188
5.12
.875
1.750
Mounting
Surface
.62
1.13
For Gresen® Repair Parts See Pages 493 - 505
182
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
GRESEN® - P16
Series P16
Flanges Available
N
SAE ‘B’ 2-Bolt
S
P.T.O. Direct Mount
Available with No. 2 Shaft Only
2.626
Typ
2.622
9/16" Dia.
2 Holes
1.43 R
.125
1.65
4.000 Pilot
3.998 Dia.
2.875
.328
Dia.
2.38 R
1.312
CL PTO Pilot
5.750
6.88
T
2.750 Pilot
2.748 Dia.
.191
CL Shaft
Mounting
Surface
P.T.O. Direct Mount T19C Trans
2.626
2.622 Typ
Suction
Side
.125
2.750 Pilot
2.748 Dia.
.328
Dia.
1.312
.191
2.06
CL Shaft
CL PTO Pilot
.200
Mounting
Surface
Cover Plates Available
1
Rear Ported Straight Thread
2.75
2.62
2
Rear Ported NPT
7
Rear Ported BSPT
Side Ported SAE 4-Bolt
3
2.75
.875
1.188
.43
.59
7/16-14NC
Depth .88
2.62
3/8-16NC
Depth .88
1.38
1.38
4
Side Ported NPT
8
Side Ported BSPT
1" NPT
Suction
SAE 16
(1-5/16-12UN-2B)
Discharge
5
3/4" NPT
9
1" NPT
1.38
3/4" NPT
Discharge
Side Ported Straight Thread
SAE 12 Discharge
SAE 16 Discharge
SAE 12
(1-1/16-12UN-2B)
Discharge Side
1.38
Di
1.15
1-1/4" SAE
4-Bolt
Conn.
Discharge Side
Suction Side
SAE 4-Bolt NPT Connectors Are Available.
See Accessory Section
6
2.75
2.62
SAE 16
SAE 20*
(1-5/16-12UN-2B) (1-5/8-12UN-2B)
SAE 16
(1-5/16-12U N-2B)
Suction
Suction Side
Discharge Side
2.313
5
.62 Dia.
*
SAE 20
(1-5/8-12N-2B)
Suction
1.2
.93
a.
3/4" SAE
4-Bolt
Conn.
1.875
Discharge Side
1.38
1.38
SAE 12
(1-1/16-12UN-2B)
Discharge
Suction Side
5
*Suction Port Adaptor Fitting to Reduce SAE 20 to SAE 16 (1 /16–12UN–2B) Order Kit 15369
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
183
GRESEN® - P16
Series P16
Dimensional Data
Mounting Dimensions
FLANGE TYPE
PUMP
SIZES
D
A
P16 - 45
P16 - 65
P16 - 85
P16 - 100
P16 - 115
P16 - 150
P16 - 180
P16 - 200
IN
3.54
3.75
3.97
4.13
4.29
4.66
4.98
5.19
E
B
MM
89.9
95.3
100.9
104.9
108.9
118.4
126.5
131.8
IN
4.55
4.77
4.98
5.14
5.30
5.67
5.99
6.20
MM
115.6
121.2
126.5
130.6
134.6
144.1
152.2
157.5
A
IN
4.66
4.88
5.09
5.25
5.41
5.78
6.10
6.31
B
MM
118.4
123.6
129.3
133.3
137.4
146.8
154.9
160.3
SHIPPING
WEIGHTS
(Approx.)
F
IN
5.67
5.89
6.10
6.26
6.42
6.79
7.11
7.32
A
MM
144.1
149.6
154.9
159.0
163.1
172.5
180.6
185.9
IN
3.66
3.88
4.09
4.25
4.41
4.78
5.10
5.31
B
MM
92.9
98.6
103.6
107.9
112.0
121.4
129.5
134.9
IN
4.67
4.89
5.10
5.26
5.42
5.79
6.11
6.32
MM
118.6
124.2
129.5
133.6
137.7
147.1
155.2
160.5
lbs.
12
13
14
15
16
17
19
20
kgs.
5.5
5.9
6.4
6.8
7.3
7.7
8.6
9.1
Mounting Dimensions
FLANGE TYPE
PUMP
SIZES
G&J
A
P16 - 45
P16 - 65
P16 - 85
P16 - 100
P16 - 115
P16 - 150
P16 - 180
P16 - 200
IN
4.66
4.88
5.09
5.25
5.41
5.78
6.10
6.31
N
B
MM
118.4
123.6
129.3
133.3
137.4
146.8
154.9
160.3
IN
5.67
5.89
6.10
6.26
6.42
6.79
7.11
7.32
MM
144.1
149.6
154.9
159.0
163.1
172.5
180.6
185.9
A
IN
3.47
3.69
3.90
4.06
4.22
4.59
4.91
5.12
B
MM
88.1
93.7
99.1
103.1
107.2
116.6
124.7
130.1
Shaft Location
For 'A' Rotation
IN
4.48
4.70
4.91
5.07
5.23
5.60
5.92
6.13
A
MM
113.8
119.4
124.7
128.8
132.8
142.2
150.4
155.7
IN
5.22
5.44
5.65
5.81
5.97
6.34
6.66
6.87
B
MM
132.6
138.2
143.5
147.6
151.6
161.0
169.2
174.5
IN
6.23
6.45
6.66
6.82
6.98
7.35
7.67
7.88
MM
158.2
163.8
169.2
173.2
177.3
186.7
194.8
200.1
.82
5.35
4.12
.82
*
.45
A
lbs.
12
13
14
15
16
17
19
20
2.62
C Dimensions
*
C
SHIPPING
WEIGHTS
(Approx.)
S&T
FLANGE
TYPE
IN
MM
D
E
F
G
J
N
S
T
.250
.187
—
.250
.250
.375
.200
.200
6.35
4.74
—
6.35
6.35
9.52
5.08
5.08
kgs.
5.5
5.9
6.4
6.8
7.3
7.7
8.6
9.1
2.75
1.85 R
1.65
B ±.060
Mtg. Surface
184
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
*These dimensions locate
SALES OFFICE HOURS
CL of bolt pattern only.
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
Description . . . . . . . . . . . Gear Pumps (Two-place)
Flow Range . . . . . . . . . . . To 32 GPM Per Section
Displacements . . . . . . . . . . . . . . . . To 3.904 C.I.R.
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . A or C
Series TP16
Construction . . . . . . . . . Cast Iron Gear Plates with
Aluminum Flange, Connector and Cover Plates
GRESEN® - P16 - 2 PLACE
Series TP16 - 2 Place
Performance Data
(Theoretical)
PUMP
SIZES
MAXIMUM
PRESSURE
MAXIMUM
SPEED (RPM)
US
Gallons
Cubic
Inches
Liters
Cubic
Centimeters
Imperial
Gallons
PSI
BAR
Single
Tandem
TP16 - 45
.0038
.878
.0144
14.388
.0031
3000
207
3600
3100
TP16 - 65
.0055
1.270
.0208
20.812
.0045
3000
207
3600
3000
TP16 - 85
.0072
1.663
.0273
27.252
.0059
3000
207
3400
2900
TP16 - 100
.0085
1.964
.0321
32.184
.0070
3000
207
3300
2800
TP16 - 115
.0097
2.241
.0367
36.723
.0080
3000
207
3100
2600
TP16 - 150
.0127
2.934
.0481
48.080
.0105
3000
207
2800
2400
TP16 - 180
.0152
3.511
.0575
57.535
.0126
2200
152
2500
2100
TP16 - 200
.0169
3.904
.0639
63.942
.0140
2000
138
2200
1900
Note: For best inlet conditions, place largest displacement section in the rear position and use both inlet ports.
How To Order
Shaft
Rotation
Pump Size—Rear Section
Pump Size—Front Section
Flange
Connector Plate
Series
Cover Plate
Tandem Pump
TP16 - 150 - 100A - 5N33
Note: Add prefix ‘V’ to pump model number (VTP16-) when ordering pumps with Viton Seals for use with phosphate ester base fluids.
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
185
Series TP16
- 2 Place
Shafts Available
2
7/8" Dia. 13 Tooth Spline Flat Root Side Fit.
5
7/8" Straight Shaft
1/4" x 1/4" x 1-3/4" Lg. Key
Major
Dia.
1.19 Full
1.16 Spline
Flange Mtg.
Surface
982
.8585
.8535
.875
.874
Dia.
.06
1.44
1.56
1.69
'F' Flange
'D' Flange
1.64
'N' Flange
.25
1.50
2.25 'F' Flange
2.38 'D' Flange
'E' 'J' Flanges
Flange
Mounting
Surface
2.50 'J' & 'E
Flanges
2.45 'N' Flange
Spline Data
Diametral Pitch . . . . . . . . . . . 16/32
Pressure Angle . . . . . . . . . . . . . 30°
No. Of Teeth . . . . . . . . . . . . . . . . 13
Minor Dia. . . . . . . . . . . . . .722-.733
Mounting Flanges Available
D
SAE ‘A’ 2-Bolt
Pad Mount
F
.44
(1,11) Wide
Mounting
Slots
1.65
(41,9)
1.65
(41,9)
3.250 (82,5) Pilot
3.248 (82,4) Dia.
2.09
(53,1)
2.00
(50,8)
.87
(22,2)
1/2-13NC
Depth 1.00
2 Places
1.88 R
(47,7)
1.75
(44,4)
Mounting Surface
4.18
(106,4)
1.13
(28,7)
.62
(15,7)
5.12
(130,0)
N
SAE ‘B’ 2-Bolt
S
.56
(14,2) Dia.
2 Holes
P.T.O. Direct Mount
2.626
2.622 Typ
.125
1.65
(41,9)
4.000 (101,6) Pilot
3.998 (101,5) Dia.
2.750 Pilot
2.748 Dia.
.328
Dia.
2.87
(123,0)
6.88
(174,7)
1.312
5.75
(146,0)
CL PTO Pilot
.191
CL Shaft
.200
.187
Mounting
Surface
3.31
186
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
- 2 Place
Discharge Ports for Connector Plate and Cover Plate
3
SAE 4-Bolt
.875
(22,0)
3/8-16UNC
Depth .81 (20,3)
* .43
(10,9)
4
NPT-Pipe Thread
8
BSPT-Pipe Thread
5
SAE 12 Straight Thread
9
.62 Dia.
(15,7)
1.87
(46,7)
.93 *
(23,3)
3/4" SAE 4-Bolt Conn.
3/4-14 PT
1-1/16-12UN-2B
1-5/16-12UN-2B
Series TP16
Dimensional Data
PD Factors
Flange Dimensions
The maximum size and number of sections of a tandem pump for a given
application is limited to the torque capability of the input drive shaft and
the spline coupling between the sections. To determine this capability, a
“PD Factor” is used:
F
IN
MM
IN
MM
D
E
F
J
N
S
.250
.187
—
.250
.375
.200
6.35
4.75
—
6.35
9.52
5.08
1.62
2.75
1.75
2.75
1.55
3.31
41.15
69.85
44.45
69.85
38.10
84.07
Maximum allowable PD for the 7/8" drive shaft is 53.
Maximum allowable PD for a coupling is also 53.
When:
E
FLANGE
TYPE
P = PSI (The relief valve setting of each individual section).
D = Displacement (In U.S. gallons per revolution of each
individual section).
Example: Assume a two-place pump TP16-150 — 150 with front
and rear sections on pressure at the same time at
2000 PSI:
A. Drive Shaft:
PD = (2000) (.0127) + (2000) (.0127) = 50.8 vs. 53.
Capability is OK
B. Coupling between front and center sections:
PD = (2000) (.0127) = 25.4 vs. 53. Capability is OK.
.82 *
(20,8)
A
C
1-1/2" SAE 4-Bolt Conn.
Common Suction
2.6
(66,0)
1.85 R
(46,9)
2.8
(71,1)
2.7
(68,5)
Conn.
Plate
Cover
Plate
This Suction Port Always
Closed with Plug or Plate
Shaft Location
for 'A' Rotation
.70
(17,8)
1.406
(35,7)
1/2-13NC
Depth .81 (20,5)
2.75
(69,8)
.82 *
(20,8)
.82*
(20,8)
Mtg. Surface
Drawn for Clockwise Rotation
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
E
F
1.37 *
(34,9)
1.62 Dia.
(41,1)
B
D ±.060
4.12
(104,6)
5.35
(135,8)
.75
(19,0)
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
187
188
Series TP16
- 2 Place
Dimensional Data
Mounting Dimensions
PUMP
SIZES
TP16-45-45
TP16-65-45
TP16-65-65
TP16-85-45
TP16-85-65
TP16-85-85
TP16-100-45
TP16-100-65
TP16-100-85
TP16-100-100
TP16-115-45
TP16-115-65
TP16-115-85
TP16-115-100
TP16-115-115
TP16-150-45
TP16-150-65
TP16-150-85
TP16-150-100
TP16-150-115
TP16-150-150
TP16-180-45
TP16-180-65
TP16-180-85
TP16-180-100
TP16-180-115
TP16-180-150
TP16-180-180
TP16-200-45
TP16-200-65
TP16-200-85
TP16-200-100
TP16-200-115
TP16-200-150
TP16-200-180
TP16-200-200
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
A
IN
1.89
2.11
2.11
2.32
2.32
2.32
2.48
2.48
2.48
2.48
2.64
2.64
2.64
2.64
2.64
3.01
3.01
3.01
3.01
3.01
3.01
3.33
3.33
3.33
3.33
3.33
3.33
3.33
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
B
MM
48.01
53.59
53.59
58.93
58.93
58.93
62.99
62.99
62.99
62.99
67.06
67.06
67.06
67.06
67.06
76.45
76.45
76.45
76.45
76.45
76.45
84.58
84.58
84.58
84.58
84.58
84.58
84.58
90.17
90.17
90.17
90.17
90.17
90.17
90.17
90.17
IN
2.42
2.64
2.64
2.85
2.85
2.85
3.01
3.01
3.01
3.01
3.17
3.17
3.17
3.17
3.17
3.54
3.54
3.54
3.54
3.54
3.54
3.86
3.86
3.86
3.86
3.86
3.86
3.86
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.08
C
MM
61.47
67.06
67.06
72.39
72.39
72.39
76.45
76.45
76.45
76.45
80.52
80.52
80.52
80.52
80.52
89.92
89.92
89.92
89.92
89.92
89.92
98.04
98.04
98.04
98.04
98.04
98.04
98.04
103.6
103.6
103.6
103.6
103.6
103.6
103.6
103.6
IN
5.90
6.11
6.33
6.33
6.54
6.76
6.49
6.70
6.92
7.08
6.65
6.86
7.08
7.24
7.40
7.02
7.23
7.45
7.61
7.77
8.14
7.34
7.55
7.77
7.93
8.09
8.46
8.78
7.55
7.76
7.98
8.14
8.30
8.67
8.99
9.20
SHIPPING
WEIGHTS
(Approx.)
D
MM
149.9
155.2
160.8
160.8
166.1
171.7
164.9
170.2
175.8
179.8
168.9
174.2
179.8
183.9
188.0
178.3
183.6
189.2
193.3
197.4
206.8
186.4
191.8
197.4
201.4
205.5
214.9
223.0
191.8
197.1
202.7
206.8
210.8
220.2
228.4
233.7
SALES OFFICE HOURS
IN
6.91
7.12
7.34
7.34
7.55
7.77
7.50
7.71
7.93
8.09
7.66
7.87
8.09
8.25
8.41
8.03
8.24
8.46
8.62
8.78
9.15
8.35
8.56
8.78
8.94
9.10
9.47
9.79
8.57
8.77
8.99
9.15
9.31
9.68
10.00
10.21
MM
175.5
180.9
186.4
186.4
191.8
197.4
190.5
195.8
201.4
205.5
194.6
199.9
205.5
209.6
213.6
204.0
209.3
214.9
219.0
223.0
232.4
212.1
217.4
223.0
227.1
231.1
240.5
248.7
217.7
222.8
228.4
232.4
236.5
245.9
254.0
259.3
lbs.
26
28
30
31
33
35
34
36
38
39
39
41
43
44
46
44
47
49
50
52
54
52
54
56
57
59
61
63
60
62
64
65
67
69
71
73
kgs.
11.8
12.7
13.6
14.1
15.0
15.9
15.4
16.3
17.2
17.7
17.7
18.6
19.5
20.0
20.9
20.0
21.3
22.2
22.7
23.6
24.5
23.6
24.5
25.4
25.9
26.8
27.7
28.6
27.2
28.1
29.0
29.5
30.4
31.3
32.2
33.1
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
- 3 Place
Description . . . . . . . . . . Gear Pumps (Three-place)
Flow Range . . . . . . . . . . . To 32 GPM Per Section
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . A or C
Series TP16
Aluminum Flange, Connector and Cover Plates
Series TP16
Performance Data
(Theoretical)
PUMP
SIZES
MAXIMUM
PRESSURE
MAXIMUM
SPEED
US
Gallons
Cubic
Inches
Liters
Cubic
Centimeters
Imperial
Gallons
PSI
BAR
RPM
P16 - 45
.0038
.878
.0144
14.388
.0031
3000
207
3100
P16 - 65
.0055
1.270
.0208
20.812
.0045
3000
207
3000
P16 - 85
.0072
1.663
.0273
27.252
.0059
3000
207
2900
P16 - 100
.0085
1.964
.0321
32.184
.0070
3000
207
2800
P16 - 115
.0097
2.241
.0367
36.723
.0080
3000
207
2600
P16 - 150
.0127
2.934
.0481
48.080
.0105
3000
207
2400
P16 - 180
.0152
3.511
.0575
57.535
.0126
2200
152
2100
P16 - 200
.0169
3.904
.0639
63.942
.0140
2000
138
1900
Note: Three-place pumps assembled from maximum displacement size sections should be checked for operating inlet conditions. Inlet vacuum should not exceed 5" Hg. @
normal speed and temperature. If “PD Factor” is not exceeded, place the largest displacement section in the rear position and use all inlet ports.
How To Order
Rotation
Shaft
Pump Size—Rear Section
Pump Size—Middle Section
Pump Size—Front Section
Series
Flange
Connector Plate
Cover Plate
Tandem Pump
TP16 - 115 - 100 - 85A - 5N33
Note: The average shipping weight will range between 40 and 80 pounds (18.1-36.3 kgs.).
Note: Add prefix ‘V’ to pump model number (VTP16-) when ordering pumps with Viton Seals for use with phosphate ester base fluids.
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
189
Series TP16
- 3 Place
Shafts Available
2
7/8" Dia. 13 Tooth Spline Flat Root Side Fit
Torque Limit 184 Lbs./Ft.
5
7/8" Straight Shaft
Torque Limit 184 Lbs./Ft.
1/4" x 1/4" x 1-3/4" Lg. Key
Major
Dia.
1.19 Full
1.16 Spline
Flange Mtg.
Surface
.8585
.8535
.875
.874
Dia.
982
Spline Data
Diametral Pitch . . . . . . . . 16/32
Pressure Angle . . . . . . . . . 30°
No. Of Teeth . . . . . . . . . . . . . 13
Minor Dia. . . . . . . . . .722-.733
1.44
1.56
1.69
'F' Flange
'D' Flange
'E' 'J' Flanges
2.25 'F' Flange
1.64
'N' Flange
2.38 'D' Flange
.06
1.50
.25
Flange
Mounting
Surface
2.50 'J' & 'E
Flanges
2.45 'N' Flange
D
.44
(1,11) Wide
Mounting
Slots
SAE ‘A’ 2-Bolt
F
Pad Mount
1.65
(41,9)
1.65
(41,9)
3.250 (82,5) Pilot
3.248 (82,4) Dia.
2.09
(53,1)
2.00
(50,8)
1.88 R
(47,7)
.87
(22,2)
1/2-13NC
Depth 1.00
2 Places
4.18
(106,4)
1.75
(44,4)
Mounting Surface
5.12
(130,0)
N
SAE ‘B’ 2-Bolt
.56
(14,2) Dia.
2 Holes
1.65
(41,9)
S
1.13
(28,7)
.62
(15,7)
P.T.O. Direct Mount
Available with No. 2 Shaft Only SAE
‘B’ 4-Bolt
2.626
2.622 Typ
.125
4.000 (101,6) Pilot
3.998 (101,5) Dia.
2.750 Pilot
2.748 Dia.
.328
Dia.
2.87
(123,0)
6.88
(174,7)
1.312
5.75
(146,0)
CL PTO Pilot
.191
CL Shaft
.200
.187
Mounting
Surface
3.31
190
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
- 3 Place
Discharge Ports for Connector Plate and Cover Plate
SAE 4-Bolt
3
4
NPT-Pipe Thread
8
BSPT-Pipe Thread
.875
3/8-16UNC
Depth .81
.43
*
*
5
9
.62 Dia.
1.875
.93*
*
3/4" SAE 4-Bolt Conn.
3/4-14 PT
1-5/16-12UN-2B
1-1/16-12UN-2B
Series TP16
Dimensional Data
1.85
To Determine Overall Pump Length
Add together the dimensions that apply to the pump
you are considering
Flange Dimensions
1.6
Shaft Extension
B=
Flange Length
C=
Front Gear Plate Length
D=
3.12 in. Connector Plate Length
79.25 mm
3.12 in. Connector Plate Length
79.25 mm
G=
Rear Gear Plate Length
H=
2.06 in. Cover Plate Length
52.32 mm
J=
.75 in. Stud Extension
19.05 mm
Total = Overall Length
PUMP
SIZE
IN
MM
-45
-65
-85
-100
-115
-150
-180
-200
.86
1.07
1.29
1.45
1.61
1.98
2.30
2.51
21.84
27.18
32.77
36.83
40.89
50.29
58.42
63.75
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
Location of Drive Shaft for
Counterclockwise Rotation
.82*
1.04
J
H
(.75) (2.06)
1/2-13NC
Depth .81
Gear Plate Length
.250
.187
–
.250
.375
.200
Center Gear Plate Length
F=
‘K’
1.62
2.75
1.75
2.75
1.55
3.31
2.8
1.03
F
(3.12)
G
1.406
C
.70*
1.56
3.12
B
A
1/2-13UNC
Depth .81
1.406
1-1/2" SAE 4-Bolt
Conn. Suction
.82*
K
1.03
D
(3.12)
E
.70*
1
Di .62
a.
E=
2.6
‘B’
D
E
F
J
N
S
1-1/2" SAE 4-Bolt
Conn. Common
Suction
1
Di .62
a.
A=
FLANGE
TYPE
1.56
3.12
2.06
This Suction Port Always
Closed with Plug or Plate
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
191
Series TP16
- 3 Place
Dimensional Data
PD Factors
The maximum size and number of sections of a tandem pump for a given application is limited to the torque capability
of the input drive shaft and the spline coupling between the sections. To determine this capability, a “PD Factor” is used:
Maximum allowable PD for the 7/8" drive shaft is 53.
Maximum allowable PD for a coupling is also 53.
When:
P = PSI (The relief valve setting of each individual section).
D = Displacement (In U.S. gallons per revolution of each individual section).
Example:
Assume a three-place pump TP16-150–150–100 with front and center
sections on pressure at the same time at 2000 PSI, and with the rear section
on pressure at 1500 PSI but not at the same time as the front and center
sections:
A. Drive Shaft:
(1) PD = (2000) (.0127) + (2000) (.0127) = 50.8 vs. 53. Capability is OK
(2) PD = (1500) (.0085) = 12.7 vs. 53. Capability is OK.
B. Coupling between front and center sections:
C. Coupling between center and rear sections:
Note:
For purpose of illustration, assume all three pump sections to be on pressure at the
same time.
A. Drive Shaft:
PD = (2000) (.0127) + (2000) (.0127) + (1500) (.0085) = 63.5 vs. 53.
Capability is not OK
Because the PD Factor for the shaft is 53, operating all three sections at the same time (to relief valve pressure) would
exceed the torque capability of the drive shaft.
B.
Coupling between front and center sections:
PD = (2000) (.0127) + ( (1500) (.0085) = 35.1 vs. 53. Capability is OK
Remember also that the PD factor for the coupling is 53. If the center and rear sections are on pressure at the same
time, the coupling between the front and center sections must transmit the torque for the center and rear sections.
192
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
Description . . . . . . . . . . Priority Valve Gear Pumps
Pump Flow Range . . . . . . . . . . . . . . . . To 38 GPM
Priority Flow Range . . . . . . 2 to 10 GPM Standard
GRESEN® - PVP16
Series PVP16
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . A or C
Series PVP16
Construction . . . . . . . . . . Cast Iron Gear Plate with
Aluminum Flange and Cover (Valve) Plate
Performance Data
(Theoretical)
PUMP
SIZES
US
Gallons
MAXIMUM
PRESSURE
MAXIMUM
SPEED
Cubic
Inches
Liters
Cubic
Centimeters
Imperial
Gallons
PSI
BAR
RPM
PVP16 - 45
.0038
.878
.0144
14.388
.0031
3000
207
3600
PVP16 - 65
.0055
1.270
.0208
20.812
.0045
3000
207
3600
PVP16 - 85
.0072
1.663
.0273
27.252
.0060
3000
207
3400
PVP16 - 100
.0085
1.964
.0321
32.184
.0070
3000
207
3300
PVP16 - 115
.0097
2.241
.0367
36.723
.0080
3000
207
3100
PVP16 - 150
.0127
2.934
.0481
48.080
.0105
3000
207
2800
PVP16 - 180
.0152
3.511
.0575
57.535
.0125
2200
152
2500
PVP16 - 200
.0169
3.904
.0639
63.942
.0140
2000
138
2500
How To Order
Rotation
Shaft
Flange
Cover Plate
Pump Size
Priority Flow*
In GPM (+1/-0 GPM)
Series
Priority Valve Pump
PVP16 - 115A - 2N3-3-13
Priority Flow
Relief Valve Setting in
100’s (+/- 100 PSI)
Example: 3.0 GPM—1300 PSI
*Consult factory for priority flows over 10 GPM.
Note: Add prefix ‘V’ to pump model number (VPVP16-) when ordering pumps with Viton Seals for use with phosphate ester base fluids.
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
193
GRESEN® - PVP16
Series PVP16
Shafts Available
Flat Root Side Fit
2
5
7/8" Straight Shaft
6
Torque limit 184 Lbs. Ft.
Major
Dia.
1.56
1.44
1.69
'D' Flange
'F' Flange
'J' 'G' & 'E' Flanges
1.635
'N' Flange
Available on –45 through –115
sizes only
3/16" x 3/16" x 1-1/4" Lg. Key
1/4" x 1/4" x 1-3/4" Lg. Key
.8585
.8535
987
982
1.19 Full
1.16 Spline
3/4" Straight Shaft
.832 .749
.Dia.
.827 .748
.875
.874
Flange Mtg.
Surface
Flg Mtg
Surface
'N' Flange
.06
1.50
2.38 'D' Flange
2.25 'F' Flange
2.50 'J' & 'E'
Flanges
2.45 'N' Flange
.25
Spline Data
Pressure Angle . . . . . . . . . 30°
No. Of Teeth . . . . . . . . . . . . 13
Minor Dia. . . . . . . . . .722-.733
1.62
1.81 'F' Flange
1.94 'D' Flange
2.06 'E' & 'J'
Flanges
2.01 'N' Flange
Flange
Mounting
Surface
D
SAE ‘A’ 2-Bolt
.44
(1,11) Wide
Mounting
Slots
1.65
(41,9)
Pad Mount
F
1.65
(41,9)
3.250 (82,5) Pilot
3.248 (82,4) Dia.
2.00
(50,8)
2.09
(53,1)
1.88 R
(47,7)
.87
(22,2)
1/2-13NC
Depth 1.00
2 Places
4.18
(106,4)
5.12
(130,0)
N
SAE ‘B’ 2-Bolt
S
.56
(14,2) Dia.
2 Holes
1.13
(28,7)
1.75
(44,4)
Mounting Surface
.62
(15,7)
P.T.O. Direct Mount
Available with No.2 Shaft Only
2.626
2.622 Typ
.125
1.65
(41,9)
4.000 (101,6) Pilot
3.998 (101,5) Dia.
2.750 Pilot
2.748 Dia.
328
Dia.
2.87
(123,0)
6.88
(174,7)
1.312
5.75
(146,0)
CL PTO Pilot
.191
CL Shaft
.200
.187
Mounting
Surface
3.31
194
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
GRESEN® - PVP16
Series PVP16
3
SAE 8
(3/4-16UNF-2B)
Priority Discharge
.75
Dia.
1 1/4" SAE
4-Bolt Conn.
Suction
7/16-14NC
Depth .88
*
.43
2.313
a.
*
1.2
5D
i
1.875
.93
3/8-16NC
Depth .88
3/4" SAE
4-Bolt Conn.
Secondary
Discharge
.875
*
1.15
*
.59
1.188
SAE 4-Bolt NPT Connectors Are Available. See Accessory Section
5
SAE 8
(3/4-16UNF-2B)
Priority Discharge
2.12
SAE 10
(7/8-14UNF-2B)
Secondary
Discharge
SAE 20
(1 5/8-12UN-2B)
Suction
1.31
3.44
6
CL of Drive Shaft for
Counterclockwise
Rotation
1.38
SAE 8
(3/4-16UNF-2B)
.56 Priority
Discharge
2.03
2.03
.82
1.65
.27
CL of Drive Shaft
for Clockwise
Rotation
2.79
SAE 20
(1-5/8-12UN-2B)
Suction
2.79
SAE 10
(7/8-14UNF-2B)
Secondary Discharge
CL of Drive Shaft
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
195
GRESEN® - PVP16
Series PVP16
Dimensional Data
Mounting Dimensions
SHIPPING
WEIGHTS
(Approx.)
FLANGE TYPE
PUMP
SIZES
D
A
3.79
4.00
4.22
4.38
4.54
4.91
5.23
5.44
PVP16 - 45
PVP16 - 65
PVP16 - 85
PVP16 - 100
PVP16 - 115
PVP16 - 150
PVP16 - 180
PVP16 - 200
B
4.60
4.81
5.03
5.19
5.35
5.72
6.04
6.25
E&J
C
5.92
6.13
6.35
6.51
6.67
7.04
7.36
7.57
A
4.92
5.13
5.35
5.51
5.67
6.04
6.36
6.57
B
5.73
5.94
6.16
6.32
6.48
6.85
7.17
7.38
F
C
7.05
7.26
7.48
7.64
7.80
8.17
8.49
8.70
A
3.92
4.13
4.35
4.51
4.67
5.04
5.36
5.57
B
4.73
4.94
5.16
5.32
5.48
5.85
6.17
6.38
C
6.05
6.26
6.48
6.64
6.80
7.17
7.49
7.70
lbs.
13
14
15
16
17
18
20
21
kgs.
5.9
6.4
6.8
7.3
7.7
8.2
9.1
9.5
Mounting Dimensions
SHIPPING
WEIGHTS
(Approx.)
FLANGE TYPE
PUMP
SIZES
N
PVP16 - 45
PVP16 - 65
PVP16 - 85
PVP16 - 100
PVP16 - 115
PVP16 - 150
PVP16 - 180
PVP16 - 200
A
3.67
3.88
4.10
4.26
4.42
4.79
5.11
5.32
B
4.48
4.69
4.91
5.07
5.23
5.60
5.92
6.13
S
C
5.80
6.01
6.23
6.39
6.55
6.92
7.24
7.45
A
5.48
5.69
5.91
6.07
6.23
6.60
6.92
7.13
B
6.29
6.50
6.72
6.88
7.04
7.41
7.73
7.94
C
7.61
7.82
8.04
8.20
8.36
8.73
9.05
9.26
lbs.
13
14
15
16
17
18
20
21
kgs.
5.9
6.4
6.8
7.3
7.7
8.2
9.1
9.5
D Dimensions
FLANGE
TYPE
Priority Flow
196
CAT. NO
CAT. NO
CAT. NO
CAT. NO
CAT. NO
CAT. NO
CAT. NO
CAT. NO
2
2 to 3
GPM
3
3 to 4
GPM
4
4 to 5
GPM
5
5 to 6
GPM
6
6 to 7
GPM
7
7 to 8
GPM
8
8 to 9
GPM
9
9 to 10
GPM
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
D
E
F
J
N
S
IN
MM
.250
.187
6.35
4.75
.250
.375
.250
6.35
9.52
6.35
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
GRESEN® - PVP16
Series PVP16
Dimensional Data
2.25
Priority Discharge
4.42
.56
3.47
2.03
2.03
1.65
.27 *
Secondary
Discharge
1.85R
B
2.75
2.75
Drawn for Counterclockwise Rotation
D
B
Relief Valve
Adjustment
CL of Priority
Discharge
Suction
5.12
3.68
3.68
1.38
.82*
CL of
Secondary
Discharge
A
C
CL of
Suction
±.060
* These dimensions locate CL of bolt pattern only.
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
197
®
Description . . . . . . . . . . . . . . . . . . . Clutch Pumps
Flow Range . . . . . . . . . . . . . . . . . . . . . To 38 GPM
GRESEN® - CP16
Series CP16
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . A or C
Series CP16
Aluminum Flange and Cover Plate
Performance Data
PUMP
SIZES
(Theoretical)
MAXIMUM PRESSURE
‘V’ BELT DRIVE
Clutch #1
Clutch #2
Clutch #3
PSI BAR
PSI BAR PSI BAR
MAXIMUM
FLAT
SPEED
RIBBED
Drive
PSI BAR RPM
US
Gallons
Cubic
Inches
Liters
Cubic
Centimeters
Imperial
Gallons
P16 - 45
.0038
.878
.0144
14.39
.0031
3000 207
3000 207
3000 207
3000 207
3600
P16 - 65
.0055
1.270
.0208
20.83
.0045
3000 207
3000 207
3000 207
3000 207
3600
P16 - 85
.0072
1.663
.0273
27.27
.0060
2800 193
3000 207
3000 207
3000 207
3400
P16 - 100
.0085
1.964
.0321
32.21
.0070
2400 165
3000 207
3000 207
3000 207
3300
P16 - 115
.0097
2.241
.0367
36.75
.0080
2000 138
2900 200
3000 207
2900 200
3100
P16 - 150
.0127
2.934
.0481
48.11
.0105
1500 103
2600 179
3000 207
2600 179
2800
P16 - 180
.0152
3.511
.0575
57.57
.0125
1200
83
2100 145
2200 152
2100 145
2500
P16 - 200
.0169
3.904
.0639
64.02
.0140
1100
76
1900 131
2000 138
1900 131
2200
Torque Ratings
Clutch Option
How To Order
Rotation
Pump Size
Rating
Clutch # 1
75 ft/lbs.
Clutch # 2
125 ft/lbs.
Clutch # 3
200 ft/lbs.
Clutch
Cover Plate
Series
Clutch Pump
S=With Switch Kit
O=Without Switch Kit
CP16 - 115A - 24-S
Note: Add prefix ‘V’ to pump model number (VCP16-) when ordering pumps with Viton Seals for use with phosphate ester base fluids.
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
199
2
Rear Ported NPTF
7
Rear Ported BSPT
3
.875
1.188
.43
2.75
2.62
*
.59
7/16-14NC
Depth .88
*
.93
1" NPT
Suction
1.38
3/4" NPT
Discharge
1.38
1.15
.62 Dia.
*
2.313
5
3/4" SAE
4-Bolt
Conn.
1.875
Di
a.
3/8-16NC
Depth .88
1.2
GRESEN® - CP16
Series CP16
1-1/4" SAE
4-Bolt
Conn.
Discharge Side
Suction Side
SAE 4-Bolt NPT Connectors Are Available. See Accessory Section
4
Rear Ported NPTF
8
Side Ported BSPT
6
5
SAE 12
(1-1/16-12UN-2B)
3/4" NPT
1" NPT
Discharge Side
Suction Side
Discharge Side
2.75
* These dimensions locate CL of bolt pattern
SAE 20
(1-5/8-12UN-2B)
SAE 16
(1-5/16-12UN-2B)
only Suction
Suction Side
2.62
1.38
SAE 12
(1-1/16-12UN-2B)
Discharge
1.38
Dimensional Data
Clutch No. 4
Flat Ribbed Belt Drive
Clutch No. 1 & 2 ‘V’ Belt Drive
Sheave Grooves for 'A' Section Belts Only
Suction for Clockwise Rotation – ‘C’
Discharge for Counterclockwise Rotation – ‘A’
1.85R
5.35
E
E
Dia.
Dia.
4.12
*
1.65
.82
2.00
C
D Max.
200
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
C
.62
D Max.
1/2 - 13NC
Depth 1.12 Min.
2 Holes
A*
B±.060
SALES OFFICE HOURS
.45
.875
1.750
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
Dimensional Data
Mounting Dimensions
PUMP
SIZES
P16-45
P16-65
P16-85
P16-100
P16-115
P16-150
P16-180
P16-200
WITH CLUTCH #1
A
B
IN
MM
2.53 64.3
2.74 69.6
2.96 75.2
3.12 79.3
3.28 83.3
3.65 92.7
3.97 100.8
4.18 106.2
IN
3.54
3.75
3.97
4.13
4.29
4.66
4.98
5.19
C
MM
89.9
95.3
100.8
104.9
109.0
118.4
126.5
131.8
IN
2.41
2.41
2.41
2.41
2.41
2.41
2.41
2.41
WITH CLUTCH #2
D
MM
61.2
61.2
61.2
61.2
61.2
61.2
61.2
61.2
IN
3.96
3.96
3.96
3.96
3.96
3.96
3.96
3.96
E
MM
100.6
100.6
100.6
100.6
100.6
100.6
100.6
100.6
IN
6.12
6.12
6.12
6.12
6.12
6.12
6.12
6.12
C
MM
155.5
155.5
155.5
155.5
155.5
155.5
155.5
155.5
IN
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
D
MM
60.5
60.5
60.5
60.5
60.5
60.5
60.5
60.5
IN
4.07
4.07
4.07
4.07
4.07
4.07
4.07
4.07
MM
103.4
103.4
103.4
103.4
103.4
103.4
103.4
103.4
E
IN
6.71
6.71
6.71
6.71
6.71
6.71
6.71
6.71
MM
170.4
170.4
170.4
170.4
170.4
170.4
170.4
170.4
GRESEN® - CP16
Series CP16
Mounting Dimensions
PUMP
SIZES
P16-45
P16-65
P16-85
P16-100
P16-115
P16-150
P16-180
P16-200
With Clutch #A
A
IN
MM
2.53 64.3
2.74 69.6
2.96 75.2
3.12 79.3
3.28 83.3
3.65 92.7
3.97 100.8
4.18 106.2
B
IN
3.54
3.75
3.97
4.13
4.29
4.66
4.98
5.19
Clutch No.3
Direct Drive
C
IN MM
3.05 77.5
3.05 77.5
3.05 77.5
3.05 77.5
3.05 77.5
3.05 77.5
3.05 77.5
3.05 77.5
MM
89.9
95.3
100.8
104.9
109.0
118.4
126.5
131.8
2.394
1.20
*
Shipping Weights (Approximate)
D
IN
4.07
4.07
4.07
4.07
4.07
4.07
4.07
4.07
MM
103.4
103.4
103.4
103.4
103.4
103.4
103.4
103.4
E
IN
5.75
5.75
5.75
5.75
5.75
5.75
5.75
5.75
MM
146.0
146.0
146.0
146.0
146.0
146.0
146.0
146.0
Clutch #1
Lbs. Kgs.
18.5 8.4
19.5 8.8
20.5 9.3
21.5 9.8
22.5 10.2
23.5 10.7
25.5 11.6
26.5 12.0
Clutch #2
Lbs. Kgs.
22.5 10.2
23.5 10.7
24.5 11.1
25.5 11.6
26.5 12.0
27.5 12.5
29.5 13.4
30.5 13.8
5.35
*
2379
2377
2.008
6.14 Dia.
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
4.12
.82
5.34 Max.
A*
B ±.060
Clutch #4
Lbs. Kgs.
22.5 10.2
23.5 10.7
24.5 11.1
25.5 11.6
26.5 12.0
27.5 12.5
29.5 13.4
30.5 13.8
3/8-24UNF
Depth
4 Holes
Use Spicer Yoke
No. 2-2-329
Pilot
Dia.
*
1.00
Clutch #3
Lbs. Kgs.
28.6 13.0
29.6 13.4
30.6 13.9
31.6 14.3
32.6 14.8
33.6 15.2
35.6 16.1
36.6 16.6
±.45
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
201
GRESEN® - CP16
Series CP16
Operating Notes
1. Detailed installation and operating instructions are included in each clutch-pump package. Consult those
SAE 20
instructions before installation and/or operation.
1-5/8-12UN-2B THREAD
2. Clutch Data:
Suction Port Adapter For No.5 Body.
Clutch No. 1 – 12 V.D.C.; 4.26 amps;
Order kit number 15369
2.82 ohms @ 20°C; 75 Lb. Ft.
SAE 16
2.75 ohms @ 20°C; 125 Lb. Ft.
1-5/16-12UN-2B THREAD
2.62 ohms @ 20°C; 200 Lb. Ft.
3. Burnishing: If full rated torque (or system pressure) is required at start-up, burnishing or cycling of the
clutch will be necessary. Burnishing of the clutch can be accomplished by running the engine between
2500 and 3000 RPM and cycling the clutch on and off against the system relief valve. The relief valve
should be set at 75% of the maximum pressure rating as shown in the chart on the front page of this
brochure. The clutch should be cycled 50 times at a rate of 10 to 15 cycles per minute.
4. Voltage: The torque capability of the clutch varies with the actual voltage measured at the clutch.
Do not operate at less than 11.5 volts.
5. For maximum clutch life: #1 & #2 should be mounted to run in ‘C’ rotation. #3 should be mounted to
run in ‘A’ rotation, (looking at the front of the clutch).
Electric Clutch Switch: Order Kit No. 33520
202
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
Description . . . . . . . . . . . . . . . . . . . Dump Pumps
Flow Range . . . . . . . . . . . . . . . . . . . . . To 38 GPM
GRESEN® - DP16
Series DP16
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . A or C
Construction . . . . . . . Aluminum Flange and Cover
Cast Iron Gear and Valve Housing
Series DP16
Performance Data
PUMP
SIZES
(Theoretical)
US
Gallons
MAXIMUM
PRESSURE
MAXIMUM
SPEED
Cubic
Inches
Liters
Cubic
Centimeters
Imperial
Gallons
PSI
BAR
RPM
DP16-45
.0038
.878
.0144
14.388
.003
3000
207
2500
DP16-65
.0055
1.270
.0208
20.812
.005
3000
207
2500
DP16-85
.0072
1.663
.0273
27.252
.006
3000
207
2500
DP16-100
.0085
1.964
.0321
32.184
.007
3000
207
2500
DP16-115
.0097
2.241
.0367
36.723
.008
3000
207
2500
DP16-150
.0127
2.934
.0481
48.080
.011
3000
207
2500
DP16-180
.0152
3.511
.0575
57.535
.013
3000
207
2500
All data based on SAE 10W oil at 150°F.
How To Order
Pump Port
A=NPT, B=BSPT
Flange
Shaft
Rotation
Valve
Series
Shift
M=Manual, P=Pneumatic
Size
Valve Port
A=NPT, B=BSPT
Series
Relief Valve Setting
20=2000 PSI
25=2500 PSI
Dump Pump
DP 16-180A-2NA-V16M-A-20
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
203
GRESEN® - DP16
Series DP16
Shafts Available
2
7/8" Dia. 13 Tooth Spline Flat Root Side Fit
7/8" Straight Shaft
5
Available with ‘N’ & ‘S’ Flanges Only
Available with ‘F’ Flanges Only
1/4" x 1/4" x 1-3/4" Lg. Key
1.19
1.16
Major
Dia.
Flange Mtg.
Surface
Full
Spline
.8585
.8535
.875
.874
Dia.
982
'N' Flange
1.69
.06
1.50
.25
Spline Data
Flange
Mounting
Surface
2.25
Diametral Pitch . . . . . . . . 16/32
Pressure Angle . . . . . . . . . 30°
No. Of Teeth . . . . . . . . . . . . . 13
Minor Dia. . . . . . . . . .722-.733
Flanges Available with Manual Valve Operation
F
Pad Mount
SAE ‘B’ 2-Bolt
N
S
P.T.O. Direct Mount
[litres/min]
18,9
37,9
56,8
75,7
2500
172
2250
155
2000
138
1750
120
.328
Dia.
[bar]
4.000 Pilot
3.998 Dia.
1.65
PSI
2.626
2.622 Typ.
9/16" Dia.
2 Holes
1.43 R
6.88
2.750 Pilot
2.748 Dia.
1.312
.375
2.38 R
2.875
A
DP16-45 & DP-65
5.750
10
15
.191
CL PTO Pilot
.250
CL Shaft
A
B
DP16-85 Thru DP16-180
Mounting Surface
5
.125
A
Face of
Value
B
Mounting
Surface
20
Flanges Available with Air Valve Operation
F
Pad Mount
N
SAE ‘B’ 2-Bolt
S
Use Spicer Sleeve Yoke
No. 10-3-33X Only
1.43 R
Port '2'
(Air)
P.T.O. Direct Mount
Port
'2' (Air)
2.626
2.622 Typ.
9/16" Dia.
2 Holes
1.43 R
A
A
DP16-45 Thru
DP16-85
.125
1.65
1.65
2.750 Pilot
2.748 Dia.
4.000 Pilot
3.998 Dia.
.328
Dia.
2.00
1/2-13NC
Depth 1.00
2 Places
.875
A
Mounting Surface
204
1.13
1.750
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
2.38 R
2.875
6.88
1.312
.375
5.750
CL PTO Pilot
Mounting Surface
B
SALES OFFICE HOURS
B
.191
.250
DP16-100 Thru
CL Shaft DP16-180
Mounting
Surface
A
B
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
Dimensional Data for Pump with Manual Valve
Mounting Dimensions
FLANGE TYPE
MOTOR
SIZES
DP16-45
DP16-65
DP16-85
DP16-100
DP16-115
DP16-150
DP16-180
F
N
A
IN
.07
.14
.36
.52
.68
1.05
1.37
B
MM
1.78
3.56
9.15
13.21
17.28
26.68
34.81
IN
4.67
4.88
5.10
5.26
5.42
5.79
6.11
A
MM
118.7
124.0
129.5
133.7
137.7
147.1
155.3
B
IN
MM
.32 8.13
.11 2.79
.11 2.79
.27 6.86
.43 10.92
.80 20.32
1.12 28.45
SHIPPING
WEIGHTS
(Approx.)
S
IN
4.42
4.63
4.85
5.01
5.17
5.54
5.86
A
MM
112.3
117.6
123.2
127.3
131.3
140.7
148.8
IN
1.50
1.71
1.93
2.09
2.25
2.62
2.94
B
MM
38.10
43.43
49.02
53.09
57.15
66.55
74.68
IN
6.23
6.44
6.66
6.82
6.98
7.35
7.69
MM
158.3
163.6
169.2
173.3
177.3
186.7
195.3
lbs.
20.5
20.5
20.5
21.5
21.5
21.5
22.5
kgs.
9.2
9.2
9.2
9.7
9.7
9.7
10.1
GRESEN® - DP16
Series DP16
1.21
6.65
.34
.34
6.06
5.33
4.38
1.85R
Neutral
Lower
Neutral
Raise
Discharge
Port
2.77
2.96
5.92
.432
1.65
Optional Shift
From This End
.376 Hole Dia.
.373
2.38
A
Optional
3RD Line
Port
1.15
5.15
6.81
3.44
Face Of Valve
Flange Mounting
Surface
9.53
Front View
CL Of Drive Shaft For
Counterclockwise
Rotation
Suction Port
1" Pipe Thread
1.38
4.38
Discharge Port
3/4" Pipe Thread
2.00
1.65
.82
.82
2.00
CL Of Drive
Shaft For
Clockwise Rotation
B±.060
All Views Drawn With 'N' Flange And
For Clockwise Rotation
2.93
3.63
5.13
Optional
Third Line Port
3/4" Pipe Thread
Rear View
* These dimensions locate CL of bolt pattern only
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391
SALES OFFICE HOURS
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
205
GRESEN® - DP16
Series DP16
Dimensional Data for Pump with Air Valve
Mounting Dimensions
FLANGE TYPE
MOTOR
SIZES
DP16-45
DP16-65
DP16-85
DP16-100
DP16-115
DP16-150
DP16-180
F
N
A
IN
2.01
1.80
1.58
1.42
1.26
.89
.57
B
MM
51.07
45.74
40.15
36.08
32.02
22.61
14.48
IN
4.67
4.88
5.10
5.26
5.42
5.79
6.11
A
MM
118.7
124.0
129.6
133.7
137.7
147.1
155.3
IN
2.26
2.05
1.83
1.67
1.51
1.14
.82
MM
57.53
52.09
46.50
42.43
38.37
28.97
20.84
SHIPPING
WEIGHTS
(Approx.)
S
B
IN
4.42
4.63
4.85
5.01
5.17
5.54
5.86
A
MM
112.3
117.7
123.2
127.3
131.4
140.8
148.9
B
IN
MM
.44 11.18
.23 5.84
.01
.25
.15 3.81
.31 7.88
.68 17.28
1.00 25.41
IN
6.23
6.44
6.66
6.82
6.98
7.35
7.69
MM
158.3
163.6
169.2
173.3
177.6
186.8
195.4
lbs.
20.5
20.5
20.5
21.5
21.5
21.5
22.5
kgs.
9.2
9.2
9.2
9.7
9.7
9.7
10.1
9.32
8.00
Flg. Mtg.
Surface
Discharge
Port
4.38
1.85R
A
Port '2' (Air)
1/8-Pipe Thread
2.77
2.96
5.92
1.65
2.38
3.44
3.09
Optional
3RD Line
Port
7.09
9.53
8.75
Front View
CL Of Drive Shaft For
Counterclockwise
Rotation
Suction Port
1" Pipe Thread
1.38
4.38
Discharge Port
3/4" Pipe Thread
2.00
1.65
.82
.82
2.00
B±.060
All Views Drawn With 'N' Flange And
For Clockwise Rotation
CL Of Drive
Shaft For
Clockwise Rotation
2.93
3.63
5.13
Port '1' (Air)
1/8" Pipe
Thread
Optional
Third Line Port
3/4" Pipe Thread
Rear View
* These dimensions locate CL of bolt pattern only
NOTES:
1—Two-Line Operation:
As shipped, pumps are assembled for two-line operation, i.e., one suction line from the tank, one pressure line to the cylinder.
The two-line system is recommended for intermittent operation only.
2—Three-Line Operation:
Uses one suction line from the tank, one return line to the tank, and one pressure line to the cylinder. Use of a filter in the return line
requires a check valve between the pump and filter to prevent filter backwash. The three-line system is recommended for continuous
operation applications.
3—A minimum of 60 PSI air pressure is required to shift the spool full travel to either raise or lower operating position. Pressure at port
“1” (air) moves the spool to raise position. Pressure at port “2” (air) moves the spool to lower position. When vented to atmosphere,
ports “1” and “2” allow spring return of the spool to neutral from either raise or lower position.
206
WORLDWIDE
PHONE 1-727-796-1300
FAX 1-727-797-8849
SALES OFFICE HOURS
NORTH AMERICA
PHONE 1-800-333-5617
FAX 1-800-759-6391

P16 Sales Gresen

Transcription

Similar documents

eastern chart (northern area)

Blower Motor Resistor And Fuel Pressure Regulator