For some of the best Stepvan Creations check out our

Transcription

For some of the best Stepvan Creations check out our
Check out these Great
Customer Vans!
Chassis
If you would like to be included in our on-line Customer’s
Van page, send a short story and pictures of your van to
'[email protected]'. Periodically we include a 'Truck
of the Month' in our bimonthly flyer. These are some of
our winners, your van could be the next!
Body
pgs 02 - 79
GM/Workhorse........................................... 8-45
Ford......................................................... 46-55
Freightliner............................................... 56-73
International..............................................74-75
pgs 80 - 92
Union City Body...................................... 80-81
Grumman / Morgan Olson....................... 82-85
Utilimaster................................................ 86-88
Door Hardware pgs 93 - 111
Windshields, Windows, & Parts................ 93-96
Side Door Hardware............................... 97-101
Rear Door Hardware............................ 102-108
Roll Up Door pgs 112 - 125
Seating
Order a Replacement Door.................. 112-116
Todco.................................................... 117-121
Whiting..................................................122-124
Dover & Diamond........................................125
pgs 126 - 130
Driver's Seating....................................126-127
Passenger Seating...............................128-130
Heating & A/C pgs 131 - 151
Grumman / Morgan Olson....................132-135
Union City Body...................................136-137
Utilimaster.............................................138-140
Parts by Type........................................142-149
Wiper
Mirrors
pgs 152 - 160
Grumman / Morgan Olson................... 152-153
Utilimaster............................................ 154-155
Union City Body..........................................156
pgs 161 - 167
West Coast..................................................161
Velvac Dual Head................................ 162-163
Front & Rear Crossview....................... 164-165
Lights
pgs 168 - 187
LED...................................................... 169-181
Incandescent........................................181-185
Fluorescent..................................................180
Electrical
pgs 188 - 201
Liftgate
pgs 202 - 204
Miscellaneous pgs 205 - 207
Keep Updated at MillSupply.com
Stepvan 2016.indb 1
7/21/2016 2:12:41 PM
REPLACEMENT PARTS that fi
2
800-888-5072 • MillSupply.com
FRONT BUMPERS
FRONT BUMPERS
Original Rib Style Bumper
Convert your Rib Style Bumper to
New Smooth Look Bumper
our Smooth Look Bumper
Our bumper mounting bracket 85-632 will allow you to convert your rib style
bumper with one of our new smooth surface bumpers.
9-5/8" Tall
"Be sure to measure the width of your current bumper
in a straight line! Do not follow curvatures!"
Smooth Look
Powder Coated White
85-537 - 86" Long
85-538 - 96" Long
All Bumpers
Made in USA
11" Tall
Mounting holes
must be drilled
Smooth Look
Powder Coated White
85-528 - 90" Long
7" Tall
Mounting holes
must be drilled
Original Rib Style
Powder Coated White
85-500 - 85" Long
85-537 - 86" Front Bumper
Fits Utilimaster with Ford chassis. Holes must be
drilled for mounting bumper to the frame. Bumper
can be shipped UPS.
85-538 - 96" Front Bumper
This bumper will fit Ford, Freightliner, and
Workhorse chassis. Holes must be drilled for
mounting bumper to the frame. Must ship by Freight.
Our new bracket and 'smooth look' bumpers are heavier
duty than the original rib bumper and offers a cleaner
look. Rib style bumper are still available, see below.
85-528 - 90" Front Bumper
Fits Utilimaster with Freightliner chassis. The
universal design can replace all styles with or
without center hole or plug hole. Holes must be
drilled to mount a plug and for mounting the bumper
to the frame. Use our 85-632 bumper bracket for
mounting. Bumper must be shipped freight.
85-500 - 85" Front Bumper
7 Gauge metal bumper fits Grumman and Utilimaster
with Freightliner and Ford chassis.
85-560 - 91.5" Front Bumper White
7 Gauge metal bumper is slightly angled and fits
Utilimaster with Ford chassis.
Mounting holes
must be drilled
7" Tall
85-632 1/4" steel bumper
bracket that fits Freightliner
chassis. Fits our bumpers
85-528, 85-537 & 85-538.
Original Rib Style
Powder Coated White
85-560 - 91-1/2" Long
85-563 - 96" Long
85-563 - 96" Front Bumper White
7 Gauge metal bumper is slightly angled and fits
Utilimaster with Freightliner chassis.
85-520 New Style 1/4" steel heavy duty
bumper bracket that fits Ford chassis.
Fits our bumpers; 85-500, 85-560 and
85-563. Replaces old "hat style" bracket.
29-355A - L & R Hood Holddown
Assembly, includes hardware, 1 pair
29-355 - L & R Hood Holddown
Bracket, Hardware Not Included, 1 pr
Fits ALL Utilimaster vehicles.
This old style Ford hat-bracket
is now replaced with 85-520.
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 2
7/21/2016 2:12:54 PM
REPLACEMENT PARTS that fit
800-888-5072 • MillSupply.com
10" Tall
FRONT BUMPERS
85-588 - 89" Long
4 Mounting holes on face: 30" x 5-1/2" apart
9" Tall
6 Mounting holes on face: center holes 25-1/2" x 6"
apart. End holes 20" from closest hole.
85-550 - 86" Long
85-591 - 91.5" Long
OE Mounting Brackets must be modified.
Black or White
GRIP
STRUT
SURFACE
Freshen up your bumper
with Your Choice of
Touch-Up Paint
85-588 - 89" Front Bumper
7 Gauge metal bumper that
fits Fedex Ground trucks with
International chassis. Bumper
can be shipped UPS.
85-550 - 86" Front Bumper
Fits Grumman, Utilimaster,
Union City Body with
Workhorse/GM chassis.
Bumper can be shipped UPS.
85-591 - 91.5" Front Bumper
Similar to 85-550 but 91.5" long
and not painted.
REAR STEP BUMPERS
Powder Coated
11 oz.
M-1662
M-1663
M-1664
M-1665
M-1666
M-1667
Dull Aluminum
Gloss White
Gloss Black
Ultra Flat Black
Gray Primer,
Sandable
Banner Red
Powder Coated Bumpers
All Bumpers
Made in USA
Built Tough with 1/4" steel side
plates and a 2" x 2" square tube
facing with 3/16" wall thickness to
stand up to the most severe beatings.
Large one foot deep 14 gauge
Grip-Strut Surface for sure foot
placement and safety while allowing
snow and other debris to fall through.
Strong Rubber Impact Strip protects
bumper and truck when backed into
docks.
One Man Installation... Our simple
mounting procedure requires only one
individual for installation.
3
FRONT & REAR BUMPERS
Part No.
Body
Width
Bumper Color
85-778..........78"............ Black
85-782..........82"............ Black
85-786..........86"............ Black
83-183..........86"............White
85-794....... 94-96"......... Black
83-194....... 94-96".........White
Fits Chassis:
• GM
• Workhorse
• Ford
• Freightliner
• International
Bumpers Include: (2) 24" Rubber impact strips
with installation hardware, Reflecti e tape, (2)
mounting brackets with hardware. Does not
include bumper mount plate, see below.
Fits all StepVan Frame
Widths from 35" to 45"
regardless of body width
Order your Bumper
by Body Width
78" - 82" - 86" - 94" - 96"
12"
Deep
Mill Supply bumpers are designed better, built tougher, easier
to install and are a better value for your dollar!
BUMPER MOUNT PLATE
TRU
CK F
TRUCK
RAM
FRAM
E
E
OUR BUMPER
PLATES WELD TO
THE TRUCK FRAME
M-1431-24 - Rubber Impact Strip
2-1/4”x1-3/8” x 24"
BP-1112 - Bumper Plate 11-1/2" Square with 8 holes.
Sold individually & not included with bumper.
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 3
7/21/2016 2:13:13 PM
4
REPLACEMENT
800-888-5072 • MillSupply.com
REAR SPRING BUMPERS
REAR BUMPERS WITH SIDE PLATES
All Bumpers
FOR SPRING MOUNTS
Made in USA
9-1/2"
Deep
Order springs
separately
GRIP
STRUT
SURFACE
86"
or 9
5.5"
Widt
h
Powder Coated
Black
Order springs
separately
86-881
Inner "C"
spring
86-501
Outer spring
86-882
Outer spring
86-502
Inner spring
86-883
Lower spring
mounting box
86-880
Hardware for
spring bumper
Includes:1 Bolt, 1 Nut,
2 Washers & 1 Bushing
(2 needed per vehicle)
2-1/4”x1-3/8”
Rubber Impact Strip
86-503
Mid spring
86-504
Lower mount
bracket
86-880 Bushing
Hardware Kit
Spring Hardware
Spring Hardware
86-882 - Outer spring
86-881 - Inner "C" spring
86-883 - Lower mount box
86-880 - Hardware Kit
86-501 - Outer spring
86-502 - Inner spring
86-503- Mid spring
86-504 - Lower Mount Bkt
86-880- Hardware Kit
(Order separately)
(Order separately)
Spring Mounted Bumpers
86-886 - 86'' Black Bumper with side plates
86-896 - 95.5" Black Bumper with side plates
• 1/4" Steel Side Plates and Spring Mount Surface
• 2" x 2" Square Tube Facing with 3/16" wall thickness
• 9-1/2" deep 14 gauge anti-slip Grip-Strut Surface
• Strong Rubber Impact Strip
• Bumper must be drilled to mount outer spring brackets
All lamps mount in
4-1/2" dia. hole.
Existing Bumper with
Kidneys Built-in
New Bumper with Lights
in Body of Truck
Some older step vans have
lights built into kidneys
on the bumper. Our new
bumpers do not allow for this
but you can purchase lights
and install them directly to
the body of your truck. See
the lights on this page or go
to the lights section of this
catalog for a full selection.
See Lights Section
for full selection!
INCANDESCENT
40042RD......Red light w/grommet &
LED
plug. 3 year warranty
M42322R... LED Red S/T/T light, 9 LEDs
40002RD......Red light w/grommet &
M42323R... LED Red S/T/T w/flang , 9 LEDs
plug, 2 year warranty
M42347...... LED Clear back-up light only
413...............2-Wire red flange moun
9 LEDs
light w/black poly housing
M42324...... LED Clear back-up light only,
413S.............2-Wire red flange moun
grommet mount, 18 LED's
light w/S.S. housing
40700........ Black open back grommet
40004C.
.
.......Clear
back-up light with
94993........ PL3 Right angle plug
grommet
& plug
M-50905.... PL3 Plug with resistor to allow an
SS-4111-W...Stainless steel flang
LED light to use a standard
mount back-up light
flashe
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 4
7/21/2016 2:13:33 PM
800-888-5072 • MillSupply.com
REPLACEMENT
5
LICENSE BOXES & RUBBER BUMPERS
HOLLOW "D" SHAPE BUMPERS
RECESSED LICENSE PLATE BOXES/INSERTS
REPLACES GRUMMAN / MORGAN OLSON
Can be special ordered
in custom lengths with
desired hole pattern.
Height
Length
33-540 - Aluminum License Plate Box
Overall Dim: 18-1/2" x 10-3/8"
Fits in hole: 16-1/2" x 6-3/4"
License light hole size: 1-1/4" (Lights not included)
33-538 - Same as 33-540 with two Incandescent license lights.
33-531 - Aluminum License Plate Box
Overall Dim: 18-1/2" x 10-1/2"
Fits in hole: 16-1/4" x 6-7/8"
License light hole size: 1-3/4" (Lights not included)
33-527 - Plastic License Plate Box
Overall Dim: 17-3/8" x 10-3/16"
Fits in hole: 15-1/2" x 6-3/4"
License light hole size: 1-3/4" (Lights not included)
Replaces existing
rotted-out license
lights
33-553 - LED License light with rubber grommet
eyebrow to direct light to license plate. Includes a
6-1/8" x 2-1/2" aluminum side plate to repair rusted
area. Made for U.C.B.C. Powder coated white. Fits
either side, sold each.
Width
Part No.
Width
Height
Length Hole Centers
M-1258........ 4-1/2".....3-3/4"........12"........ 6"
M-1047......... 4-1/2".....3-3/4".... 13-1/2"..... 7"
M-1078......... 4-1/2".....3-3/4"........18"....... 12"
M-1169......... 3-5/8".....3-1/2"........14"........ 8"
M-1169X...... 3-5/8".....3-1/2"........14".... 10-1/4"
DOCK BUMPERS
671-1041
Dock bumper with 3 mounting
holes, at 6-1/2" centers.
Dim: 16"L x 2-1/2"W x 2"H
75-240
Dock bumper with 3" hole centers.
Dim: 6"L x 3"W x 3-1/2"H
RUBBER BUMPER IMPACT STRIP
Includes bar washer
Bar washer is not drilled,
only rubber is drilled
1111001 - Armored
license light with
bracket. All aluminum
construction, standard
on Grumman/Morgan
Olson.
66-438 - LED 2-wire chrome
license light with 2 screw mount.
Fits in 1-3/4" hole.
70-4817 - Incandescent chrome
1-wire license light.
26-338 - Incandescent chrome
2-wire license light.
263-3331 - This 2-wire license light has
a 2-1/2" x 1-3/4" aluminum flange that
surrounds the lamp. Popular on Utilimasters
with the hole rotted out around the original
light. Light can be snapped out of base to fit a
standard 1-1/4" hole.
SOLID "D" SHAPE
BUMPER
Rubber impact strips can
be special ordered to be cut
and drilled to any length in
quantities of 20 or more
M-1431-24 - 24" Rubber Impact Strip
M-1431-78 - 77-1/2" Rubber impact strip
M-1431-82 - 81-1/2" Rubber impact strip
M-1431-86 - 85-1/2" Rubber impact strip
M-1431-94 - 93-1/2" Rubber impact strip
M-1431-96 - 95-1/2" Rubber impact strip
SINGLE RETRACTABLE STEP
Retractable Step can be bolted or welded to the floor, bumper or
frame. Step is solid with a black powder coat finish.300 l . Wt. Limit.
Overall depth open: 14-1/2", Overall depth closed: 12"
Height closed: 5-1/4", Step depth: 8".
CLOSED
B-4000
8"L x 6"W x 3"H
Half round
dock bumper.
2-7/8"W x 5-3/8"L
hole centers
2-1/4"
66-443 - LED 2-Wire
License light. Snaps in
place and fits in 1-1/4" hole.
66-431 - Incandescent
1-Wire license light that
snaps in place. Fits in 1-1/4"
hole.
1-3/8"
83-920 - 24" Wide Retractable Step
83-934 - 28" Wide Retractable Step
OPEN
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 5
7/21/2016 2:14:16 PM
6
REPLACEMENT PARTS that fi
800-888-5072
RADIATOR & CONDENSER FANS
RADIATOR COOLANT FAN
• MillSupply.com
REVERSIBLE S-BLADE ELECTRIC COOLING FANS
MOUNTS TO RADIATORS AND CONDENSERS
• Lowest profile high-performance,
reversible fan on the market.
• 130/160 watt dust and water proof
sealed motor; can be sprayed and washed.
• Quiet, S-blade design - works as a puller
or pusher of air.
• All glass filled nylon construction.
• Includes mating locking quick disconnect
with 9" pigtail
• Includes (4) 90 degree mounting feet
with rubber spacers and pads.
•Increase Gas Mileage by up to 15%
•Increase Water Pump Life
•Reduce Engine Warm Up Time
•Reversible for push or pull applications
•Mounts on Condenser or Radiator
Measure the Condenser or Radiator
Before Installation and Use the Largest
Fan that will Easily Fit.
CFM and Ampere are shown at "0" static pressure. Tested at 13.5 volts.
Fan Part No.
Diameter
80-509
80-510
80-512
80-514
80-516
9"
10"
12"
14"
16"
Air Type
Current
Draw
790 CFM
950 CFM
1155 CFM
1555 CFM
1810 CFM
7.7 Amps
7.9 Amps
7.7 Amps
10.1 Amps
12.3 Amps
TO MOUNT HOLE
Part No.
80-509
80-510
80-512
80-514
80-516
A
8.11"
10.59"
12.52"
14.45"
15.75"
Fan Assy Dimension
B
C
D
9.72"
5.47" 5.47"
11.20" 5.59" 9.70"
13.23" 6.61" 11.46"
15.04" 7.51" 13.03"
16.30" 8.14" 14.12"
E
2.48"
2.48"
2.48"
2.87"
2.87"
80-501 - Adjustable temperature sensing relay
switch kit
Aluminum Billet Brackets fit
14" and 16" fans
80-539
80-536
80-536 -Billet aluminum universal fan brackets for 14" and 16" fans.
Kit includes: (2) Billet aluminum brackets with 4 adjustable side
angle brackets that attach to the side flange of radiator; (4) bolts,
washers and nylon lock nuts for mounting fan.
Mill Supply carries replacement condenser fans that
mount underneath air conditioned bus vans. These
fans are constantly exposed to road elements that
shorten their life span considerably. Mill Supply
stocks two popular sizes and styles that use a
universal mounting system for a quick replacement
in a variety of applications.
CONDENSER FANS
•12 Volt
•130 Watts
•730 Max CFM
Mount position of fans are shown on the
condenser section of the A/C unit positioned
underneath an E-450 Econoline.
80-539 - Universal metal bracket strips with mount bolts.
Brackets can be bent or trimmed to desired shape and
length. Fits all fans.
Kit includes: (4) 7-1/4" long strap brackets; (4) bolts,
washers and nylon lock nuts.
One fan will replace many existing units with its variety of
mounting positions built into the perimeter of the fan. Measure
your fan diameter before you order.
80-523 - 10" Low Profile
Condenser Fan
Our 10" low profile unit replaces Spal and R vcor fans.
Extends 2-3/8" from the body and uses S-curve blades.
Overall outside diameter is approximately 11". This unit
replaces 10" fans used on TransAir and some AC Carrier
units. Measure your fan diameter before you order.
•12 Volt
•225 Watts
•989 Max CFM
80-527
11" Condenser Fan
This 11" Fan fits C Carrier. This larger
fan extends 3-13/16" from the body and
uses straight blades as shown. Its overall
outside diameter is approx. 12".
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 6
7/21/2016 2:14:31 PM
REPLACEMENT PARTS that fit
800-888-5072 • MillSupply.com
ENGINE & TRANSMISSION COOLERS
7
ENGINE AND TRANSMISSION COOLERS
80-944 Transmission oil
80-940 Engine
cooler. Replacement for
1999-2010 Workhorse
Step Vans.
oil cooler.
Replacement for
G.M. step vans.
Core Dim: 11" x 8-3/8" x 1-1/2"
Overall Dim: 20" x 10-1/2"
Cooler Inlet Size: 3/8-18 NPT
Quick Disconnect
Cooler Outlet Size: 3/8-18 NPT
Quick Disconnect
Dim: 8"x11"x1.5"
80-938 Transmission Oil
Cooler that fits 99-2004
Ford E350/E450. Comes
with mounting brackets and
hose fittings.
Dim: 6-1/8" x 13-1/2".
80-942 8"x11"x1.5"
Universal
transmission oil
cooler. Includes
installation kit.
COOLANT OVERFLOW TANKS
Convert "open" cooling systems or replace original equipment.
85-083 Overflow
reservoir with
screw-on cap attaches
directly to fender well or
other body member.
Kit includes: reservoir, cap,
overflow tubing, and mounting
hardware.
Overall Dim: 6"W x 8"H x 4-1/2"D
Coolant Recovery Tank
fits GM/Workhorse
85-090 Overflow
Reservoir for Radiator,
3 quart capacity
85-094
85-092
Front View
85-088
Plastic Surge Tank that
fits 6.5L Diesel GM
85-092 - Coolant recovery tank
(less bracket)
85-094 - Bracket for tank
Back View
85-093
Plastic surge tank for our
radiator 80-886. Fits Freightliner
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 7
7/21/2016 2:14:54 PM
74
REPLACEMENT PARTS that fi
800-888-5072 • MillSupply.com
INTERNATIONAL CHASSIS
PARTS that fifit INTERNATIONAL STEPVANS
60 GALLON CURBSIDE FUEL TANK
RADIATORS
53.5"
Ships
by
Freight
80-878 - Fits International w/ 444E
Oil cooler on grill side
Core: 30-5/8"H x 13-1/8"L x 2-1/4"D 3-Row
Hose Fittings:Inlet 2-1/2" UC
Outlet 2-1/4", lower left
90° bend, points to 5 o'clock
Replaces: 2505159C91, 3503905C92
23"
Fuel pickups are on
top of tank
Ships
by
Freight
14"
18.5"
k
f Truc
ar o
rd Re
Towa
Corsol® on the
Outside, Aluminized
on the Inside. See
page 61.
81-984 - CURBSIDE Tank, 60 Gallon, 53.5"L x 23"W x 14"H. Filler
tube centered 18.5" from front edge of tank. Fits International
Chassis. Popular on Fedex Ground Delivery vehicles.
Ships
by
Freight
Ships
by
Freight
80-875 - Fits International
Core: 31"H x 12-3/4"L x 2-1/4"D 3-Row
Hose Fittings:Inlet 2-1/2" UC
Outlet 2-1/2", lower right
Replaces: 1659054C91,1659054C92,
1659054C93, 2022892C92,
2505146C1
81-945 - 35-7/8" Fuel Tank Strap, Requires 3 per tank, Sold each.
80-870 - Fits International 6.9/7.3L Non-Turbo
Core: 31"H x 26"L x 2-1/4"D 3-Row
Hose Fittings:Inlet 2-1/2" UC
Outlet 2-1/2", lower left
Replaces: 493345C1, 493347C2, 493350C2
STEMCO KAISER QWIKKITTM &
PLUSKITTM KING PINS
Learn the difference
between a QuikKit &
PlusKit on page 68.
FUEL TANK STRAP
KAISER KING PIN SETS that fit
INTERNATIONAL 1652 STEPVAN
89-007 - QWIKKit King Pin, Dim: 1.359 x 7.97
89-089 - PLUSKit King Pin, Dim: 1.359 x 7.97
89-032 - Installation 'T' wrench for 89-007, recommended
89-094 - Lip Seal & Bushing Install tool for both, optional
that fit
fits FREIGHTLINER
AND INTERNATIONAL
89-232
19.5" x 6" Dual wheel,
6 lug
2 hand holes
89-231
19.5" x 6.75",
Dual wheel,
8 lug
4 hand holes
89-377
Wheel Simulator Set, 19.5" wheel,
6 Lug, use with 19.5" rims.
89-223
19.5" x 6" wheel,
5 lug front
10 lug rear
89-200 - 89-370
5 hand holes Valve Stem, Wheel Simulator Set, use with
1-5/8" Long 19.5" rims. Deep dish style
EXHAUST SYSTEM that fit
fits INTERNATIONAL
57-352
89-032
89-094
RIMS & WHEEL HARDWARE
57-344
57-344
Approx. 4' long (trim to fit multiple wheelbases)
57-429 - Muffler, 36.5" Long with 3.5"
Inlet and 4" Outlet. All welded seams
do not split, long lasting heavy-duty
aluminized steel. Popular on Fedex
Ground trucks with International
Chassis.
Popular on Fedex
Ground Trucks
57-436 ­- Two piece exhaust pipe.
4" Diameter pipe utilizes factory
hangers. 16 gauge aluminized steel.
Cut in two to reduce shipping costs.
57-352 - 3-1/2" Muffler clamp. Double
saddle with welded sides.
57-344 - 4" Muffler clamp. Double
saddle with welded sides.
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 74
7/21/2016 2:33:03 PM
REPLACEMENT PARTS that fi
800-888-5072 • MillSupply.com
INTERNATIONAL CHASSIS
BRAKE HARDWARE that fit
fits INTERNATIONAL
75
Our calipers replace your original Dual Piston Bosch Calipers. These calipers look similar except for piston diameter.
Please note your 7-digit casting number on caliper.
FRONT
REAR
FRONT
REAR
CHECK YOUR CASTING
# BEFORE ORDERING
10-827 - LH or RH Front Dual
Piston Caliper. 2.60" Piston Dia.
(Casting # on caliper 4151733)
Uses pad D184.
D-184 - Severe-Duty Brake
Pad. One axle set
10-828 - LH or RH Rear Dual
Piston Caliper. 2.88" Piston Dia.
(Casting # on caliper 4150844)
Uses pad D225.
10-833 - LH or RH Front
Caliper - 66mm Piston
Dia. (Casting # on caliper
4153269) Uses pad D786.
D-225 - Severe-Duty Brake
Pad. One axle set
BRAKE HARDWARE KIT
(ONE AXLE SET)
FOR 10-827 & 10-828
10-834 - LH or RH Rear
Caliper - 73mm Piston
Dia. (Casting # on caliper
4153222) Uses pad D786A.
D-786A Front or Rear
Brake pads (thick pads)
one axle set
D-786 Front or Rear
Brake pads (thin pads)
one axle set
10-851 Brake Hardware Kit
(one axle set).
Includes:
(2) Support Springs
(2) Keys
(2) .025 Shims
(2) .045 Shims
(2) Caliper Bolts
BRAKE HARDWARE for 10-833 & 10-834
10-928
10-923
11-310 Brake & Clutch
Pedal Pad that fits
International;
4-1/2"W x 3"H
CHECK YOUR CASTING
# BEFORE ORDERING
EMERGENCY BRAKE HANDLE
10-970 - Parking Brake Handle with
closed end for cable. Handle turns
to adjust cable tension. May need
slight modification o mount.
10-927
10-924
10-922
10-925
10-928 Brake Pad Clip, sold each (4 needed per axle set)
10-927 Rubber Bushing for guide pin (4 needed per axle set)
10-925 Guide Pin Bolt Length: 1.48", Thread: M12x1.25, 18mm
hex head with 25mm washer (4 needed per axle set)
10-924 Bushing for 10-922 guide pin (2 needed per axle set)
10-923 Guide pin without groove. Sold each. 2 needed per axle
set. This guide pin and 10-922 are needed for each caliper.
10-922 Guide Pin with groove (use with bushing 10-924) (2 needed per axle set) Use 10-923 for other guide pin on same caliper.
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 75
7/21/2016 2:33:41 PM
76
REPLACEMENT PARTS that fi
800-888-5072 • MillSupply.com
SPRINTER VANS
PARTS that fifit SPRINTER VANS
For Mirrors to fit your
Sprinter, see page 164
10-8052
Pulley, A/C
Bypass pulley
10-8043
Tail Lamp Circuit
Board, LH or RH
21
31 Outer Front Door
Bottom
Front Wheel
Arch Rear Area
31A Lower Front Door
Bottom
33 Sliding Door Bottom
51
Rear Wheel
arch
53 Lower Left Side Panel
55 Lower Front Quarter
57 Lower Rear Quarter
64 Panel Below Rear Doors
36L Left Rear Door Bottom
36R Right Rear Door Bottom
REPLACEMENT SHEETMETAL
Index# Description
Year
Mill Part#
21.........Front wheel lower rear section, between wheel & door............. 96-06...........285-03-21
31”H and extends 12” toward rocker, specify L or R
31.........Doorskin, front door, lower outer, 26”H, specify L or R.............. 96-06...........285-03-31
31A.......Doorskin, front door, lower outer, 12”H, specify L or R.............. 96-06........ 285-03-31A
33.........Doorskin, sliding side door, lower outer, universal L=R............. 96-06...........285-03-33
47”L x 15”H
36.........Doorskin, rear cargo door, lower outer, 31”L x 19”H.................. 96-06...........285-03-36
specify L or R
N.I.........Rocker panel, front door, 34”L, specify L or R........................... 96-06...........285-03-40
N.I.........Rocker panel, side sliding door, 47”L x 7”H............................... 96-06...........285-03-43
51.........Rear wheel arch area, 42”L x 28”H .......................................... 96-06...........285-03-51
53.........Lower Left side repair panel, 47”L x 19”H.................................. 96-06...........285-03-53
55.........Rear quarter, lower front section, LWB, 50”L x 17”H................. 96-06...........285-03-55
specify L or R
57.........Rear quarter, lower rear section, LWB, 42”L x 16”H.................. 96-06...........285-03-57
specify L or R
64.........Rear panel below rear doors, 56”W x 9-3/4”H........................... 96-06...........285-03-64
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 76
7/21/2016 2:33:45 PM
REPLACEMENT
800-888-5072 • MillSupply.com
FUEL LINE KIT
77
FUEL LINE REPLACEMENT KIT
From the Tank to the Engine - We've got you Covered!
Just thinking of replacing a fuel line will have you calling in sick for
the day. With our kit you can use quick disconnect couplers making
the job a breeze compared to replacing original steel lines. Plus you'll
be saving money too.
99-1200 - Fuel line replacement kit, 52 pieces total with 15ft of 5/16"
nylon line and 15ft of 3/8" nylon line. Convenient... Everything you
need in one kit. Cost effective saves up to 70% vs. OEM fuel lines.
Easy to use with no special insertion tools required. Made in USA
For Nylon to Steel Repair – Quickly secure nylon fuel line to quick connect at fuel sending unit
with seal clamps provided. Use the Nylon to Steel compression fitting to connect to a steel line.
Average connection time = 5 minutes.
Beginning at your sendiing unit snap in
the quick disconnect
Older fuel pumps have steel fittings – The kit supplies a Female to Nylon connector
eliminating your steel line for a quick fix. From there, your options are limitless allowing
you to continue with nylon line or convert it back to steel with fittings provided.
Crimp tool quickly
secures nylon hose
to fittings.
We have made a steel fuel line kit (81-801) that extends to the filter and replaces the original 5/16" and 3/8" line.
We used quick connect couplers to snap right on to the fuel pump. See page 40.
FUEL LINE KIT REPLACEMENT PARTS
1
2
3
4
5
6
9
7
10
8
11
1...... 99-4048.......3/8" line adaptor with nut, 6" L, 2 pc
1...... 99-4049.......5/16 line adaptor with nut, 6"L, 2 pc
2...... 99-4050.......3/8 Brass nylon to nylon push-on barb, 2 pc
2...... 99-4051.......5/16 Brass nylon to nylon push-on barb, 2 pc
3...... 99-4052.......3/8" Brass Female to nylon adaptor, 2 pc
3...... 99-4053.......5/16" Brass Female to nylon adaptor, 2 pc
4...... 99-4054.......3/8" Nylon to steel Compression fitting, 5 pc
4...... 99-4055.......5/16" Nylon to steel Compression fitting, 5 pc
5...... 99-4056.......3/8" - 3/8" Straight Steel to Nylon Quick Connect, 2 pcs
5...... 99-4057.......5/16 - 5/16" Straight Steel to Nylon Quick Connect, 2 pcs
5...... 99-4058.......3/8" - 5/16" Straight Steel to Nylon Quick Connect, 2 pcs
6...... 99-4060.......3/8" - 90 degree Steel to Nylon Quick Connect, 2 pcs
6...... 99-4061.......5/16" - 90 degree Steel to Nylon Quick Connect, 2 pcs
6...... 99-4062.......3/8" - 5/16" - 90 degree Steel to Nylon Quick Connect, 2 pcs
7...... 99-4064.......3/8" seal clamp, 10 pcs
7...... 99-4065.......5/16" seal clamp, 10 pcs
8...... 99-4066.......3/8" Nylon to nylon fuel line union, 2 pcs, not in kit
8...... 99-4067.......5/16" Nylon to nylon fuel line union, 2 pcs, not in kit
9...... 99-4070.......3/8" Nylon fuel line, 25 feet
9...... 99-4071.......5/16" Nylon fuel line, 25 feet
10.... 99-4080.......3/8" Fuel check valve kit, not in kit
11.... 99-4081.......5/16" fuel check valve kit, not in kit
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 77
7/21/2016 2:33:55 PM
78
REPLACEMENT
800-888-5072 • MillSupply.com
UNIVERSAL PARTS
UNIVERSAL FILLER NECKS
81-931 - 2" Diesel Fuel Filler Neck with 5/8" Vent & Cap, Round Flange
81-943 - 2" Diesel Fuel Filler Neck with 1" Vent & Cap, Round Flange
81-948 - 2" Unleaded Fuel Fill with 5/8" Vent & Cap, Round Flange
81-928 - 1-3/4" 90 Degree Fill Elbow
81-929 - 2" 90 Degree Fill Elbow
81-924 - 5/8" 90 Degree Vent Elbow
81-925 - 1" 90 Degree Vent Elbow
81-932 - 2" Diesel Fuel Filler Neck with 5/8" Vent with Cap, Angle Flange
81-944 - 2" Diesel Fuel Filler Neck with 1" Vent with Cap, Angle Flange
81-954 - 1-3/4" x 36" Flexible filler hose
81-998 - 2" x 36" Flexible filler Hose
81-858 - 5/8" I.D. x 36" Flexible vent hose
WHEEL NUT INDICATORS
Wheel Nut Indicators can identify a loose wheel nut with a simple visual inspection. After a wheel
is properly torqued the Wheel Nut Indicators are placed on the wheel nuts in a uniform direction.
At a glance the driver can see if the Wheel Nut Indicator has turned counter-clockwise showing
the nut loosened. Temperature-sensitive polymer detects bearing or brake overheating problems
by deforming at temperatures above 250°F. Our part number 10-229 has a temperature rating
of 450 degrees and is ideal for the garbage fleet and school buses that make frequent stops.
Provides a quick visual of a loose wheel nut.
•Reduce your risk of wheel detachment
accidents.
•Pays for itself in just one avoided re-torque
procedure.
•Quickly identify a hot wheel.
•Decrease equipment downtime.
•Facilitates official roadside inspections.
•Clearly visible at night and in bad weather.
•Easy to install.
•Costs only a few dollars per wheel.
Sizing Wheel Nuts
Measure
from flat
to flat.
Installation Procedures
1. Torque wheel nuts to proper specs
2. Ensure correct size by measuring
nut from flat to flat
3. Place wheel check over each nut
with collar toward wheel. (easier to
replace if necessary)
4. For disc wheel, point the point to
the center of following stud
5. For other wheel types, (spoke
pattern), point indicators toward
the hub
6. Inspect daily, if moved or deformed
replace with red identifier and
notify service dept.
Indicators shown in new position
One wheel nut
beginning to loosen
Our most Popular Sizes in shaded area
Mill No.
Dim "
Dim mm
OE No.
Stk Code
Typical Applications
Qty
10-203
13/16”
20.5
WCH15C 63076
Ford Courier Vans
100
10-207
27/32”
20.8
WCH16C 63078
Ford 450 & 550
100
10-208
7/8”
22.0
WCH04C
63058
Smaller courier & 100
GMC flanged cap of flat ut.
10-209
15/16”
23.8
WCH17C 63131
Dodge – 1 Ton. 100
10-211
1
25.0
WCH12C
63070
Curb-side courier units
100
10-216
1-1/16”
27.0
WCH05C
63060
School buses, courier units & 100 Ford tapered nut.
10-218
1-1/8”
28.0
WCH06C
63062
Inverted flange or school buses 100
& small transit buses.
10-220
1-1/4”
31.0
WCH07C
63064
Heavy duty trailers – spoke wheel. 100
10-227
1-5/16”
33.0
WCH03C
63141
Budd Uni-mount – 10 stud
100
hub-piloted wheel & GM Buses.
10-228
1-5/16”
33.0
WCH03
63056
Same size as 10-227 but 20 packaged 20 pcs per bag
10-229
1-5/16”
33.0
WCHT03
63136
Same size as 10-227 but
20
has 450o max temperature rating, 20 pcs per bag. Ideal for school
buses, garbage trucks and other vehicles that make frequent stops
10-234
1-1/2”
38.1
WCH02C
63054
Motor Wheel – 8 stud hub-
100
piloted wheel & cone locknut.
10-236
1-9/16”
40.5
WCH09C
63066
Hino and Isuzu trucks.
100
10-247 1-15/32”
37.5
WCH01C
63052
Budd stud piloted nuts.
100
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 78
7/21/2016 2:34:00 PM
Does Your Fleet Include
More Than Just Stepvans?
Other Catalogs Available!
Snow Plow
Parts
Medium Duty
Truck
Call Today for your Free Copy
216-518-2710 Ext: 2
or go to www.millsupply.com
Stepvan 2016.indb 79
7/21/2016 2:34:08 PM