docExhaust Tools - WALKER® COMMERCIAL VEHICLE
download 
Report Transcription
Exhaust Tools - WALKER® COMMERCIAL VEHICLE
GENERAL INFORMATION Exhaust Tools Available for Order Replacement chain for pipe cutter #35613. 35542 / 35613 35616 35890 This expander is designed to increase the pipe diameter with an impact wrench – tubing from 1-5/8" to 2-7/16". Lubricate the tool regularly with an anti-seize compound, such as PermaTex ® from Loctite ®. 35891 35961 Quickly reshapes pipe and bushing ends for accurate, leakless exhaust system fit. The smooth, friction-free forged steel cone permits expanding and rounding work on diameters of pipe. 35891 is for 2-3/4" to 4-1/2" diameter. 35961 is for 1" to 2-3/4" diameter. 35964 Heavy-duty saw has two-speed and variable speed controls. Comes in a convenient carrying case with a blade assortment. Also available: No. 35965 18 TPI 6" blades (10 per package) and No. 35967 18 TPI 6" stainless steel blades (5 per package). 35968 Easily cuts 1" to 3" O.D. pipes. Also available: No. 35969 cutting wheels (6 per carton) and No. 35970 axle pins (10 per carton). 35998 14" metal/steel cut-off saw blades (25 per carton). 35999 Work gloves (144 pair per bundle). 36312 This replacement three-way 7" cutting chisel is made of forged steel. 36361 2-3/8" to 3-1/4" pipe expander. Removes clamp grooves and rounds out pipes. Fits most pipes. Use with wrench or impact tool. 35890 35964 35891 / 35961 35968 35998 35999 36312 36361 For more information about our products, visit www.walkerexhaust.com For accurate, leak-free exhaust system fit ©2007 Tenneco Printed in USA HEAVY DUTY TRUCK GVW 7-8 35616 O.E. CROSS INDEX 35273 APPLICATION BY ENGINE Adjustable for pipes from 3" to 6" O.D. Adjustable for pipes from 3/4" to 3" O.D. Designed to easily cut pipes without gripping pressure. Simply hook the pin to the desired diameter, then tighten the chain by turning the knurled handle and swivel tool. No need to over-tighten the handle and exert excess pressure on the pipe. 35258 NOISE AND BACKPRESSURE DATA 35542 35613 35176 TRACTOR These three expanders help to swiftly remove clamp grooves and dents from pipes and muffler bushings, leaving smooth, rounded surfaces. All metal parts are rust-proofed. 35176 is ideal for import or compact vehicles with pipes 1-3/16" to 1-5/8" I.D. 35258 is for 1-5/8" to 2-1/4" pipes, and 35273 is for 2-1/8" to 3-7/16" pipes. MUFFLER SPECS 35176 35258 35273 MEDIUM DUTY TRUCK GVW 3-6 SCHOOL BUS TOOLS AND ACCESSORIES Ask your Walker ® representative for details. 13 EXHAUST TOOLS Muffler Cement & Sealing Compound 35958 35958 Consists of iron-reinforced material tested to 12000 F. Effective for sealing exhaust joints subject to elevated temperatures - such as catalytic converters. Available in 16 oz. tubes only. 35959 35959 Stops sound leaks and prevents dangerous exhaust gas leakage to 9000 F. Ideal for “out-of-round” muffler and pipe connections. Easy to apply. Available in 5 oz. tubes. Pipe Hooks 35729 - Up to 2¹⁄₂" Diameter. 35165 - For 2³⁄₄" to 4" Diameter. 35187 - For 5" to 6" Diameter. 35729 35165 35187 14 Packaged 50 to a box, these hooks provide an economical and easy method of storing exhaust and tail pipes. ACCESSORIES 3 — — 3¹⁄₄ — 3¹⁄₂ — 3³⁄₄ 4 4⁷⁄₁₆ 4¹⁄₂ 5 Non Chrome (50) Indiv. Part — — — — — — — 36145 — — Chrome Non Chrome Chrome Indiv. Indiv. Indiv. Part — — — — — — — — — — Part — — — — — — — — — — Part — — — — — — — — — — 36248 35304 — — — 36147 — — — 35786 — 35624 35444 35445 — — — 35787 — 35696* 35694* — 35788 35410 35373 — 35456 — — — 35799* — — — 35776 — — 35789 35457 35800* 35777 35794 33300 — — — — 35753 — — — — — — — — — — 35752 — 35424 — 33304c — — — 35772 36249 35760 35773 36482 — 35774 35758 — — — 35775h 33305c 35757 — 5¹⁄₂ 6 — h Longer U Bolt. — — — — — — — 35795 c Order in quantities of 25, standard carton. * Size Stainless Steel U-Clamps Heavy Duty Slotted GUILLOTINE CLAMP /₈" U Bolt 11 Gauge Saddle (50) Indiv. Part — — — — — — — — — — 35447* — 35409 35497 Order in quantities of 10, standard carton. 32112 — 32134 32178 32200 — 32214 32212 32300 — — 32215 — 32216 — 32217 32218 32219 g 50 per carton. AccuSeal™ Narrow Band One Bolt Clamp Size Aluminized Steel Part No. 36433 36434 ●36460 36435 36436 35227 35228 2¹⁄₄" 2¹⁄₂" 2³⁄₄" 3" 3¹⁄₂" 4" 5" 430 Bright Stainless Steel Part No. 36437 36438 ●36461 36439 36440 36441 36442 10 per Std. carton TOOLS AND ACCESSORIES 35446 — 35693* 35692* Zinc Plated. HEAVY DUTYg STAINLESS STEEL U-CLAMPSc w/Slotted U-Bolt Holes 11 T-304 Stainless Steel Gauge Saddle ³⁄₈" U-Bolt 11 Gauge Saddle ³⁄₈" U-Bolt 1¹⁄₂" 1⁵⁄₈" 1³⁄₄" 1⁷⁄₈" 2" 2¹⁄₈" 2¹⁄₄" 2¹⁄₂" 3" SCHOOL BUS — /₈" U Bolt 11 Gauge Saddle (50) (50) Indiv. Bulk. Pkg. Part — — — — — — 36509 33112 36510 — 35343 33134 35344 33178 35335 33200 35364 33218 35336 33214 35337 33212 35354h 35793 — FLAT STRAP U-BOLT CLAMP MEDIUM DUTY TRUCK GVW 3-6 34212 — HEAVY DUTY CLAMP HEAVY DUTY CLAMP W/WELDED SADDLE HEAVY DUTY TRUCK GVW 7-8 35414 2³⁄₄ APPLICATION BY ENGINE 2¹⁄₂ (Flat Strap U-Bolt) NOISE AND BACKPRESSURE DATA Size 1¹⁄₈ 1¹⁄₄ 1³⁄₈ 1¹⁄₂ 1⁵⁄₈ 1³⁄₄ 1⁷⁄₈ 2 2¹⁄₈ 2¹⁄₄ STANDARD DUTY CLAMP ⁵/₁₆" U Bolt 13 Gauge Saddle (50) (50) Indiv. Bulk. Part Pkg. 35322 35599c 35323 — 35324 — 35325 34112 35405 34158 35406 34134 35407 34178 35408 34200 35334 34218 35413 34214 (Guillotine) Size 1¹⁄₂" 1⁵⁄₈" 1³⁄₄" 1⁷⁄₈" 2" 2¹⁄₈" 2¹⁄₄" 2¹⁄₂" 3" TRACTOR (Heavy Duty w/ Welded Saddle) MUFFLER SPECS (Heavy Duty) c 10 per carton. Heavy Duty ¹⁄₄" Wire Ring Clamp Zinc Plated Size Range 2⁵⁄₁₆" to 2¹⁄₂" 2⁷⁄₁₆" to 2⁵⁄₈" 2⁹⁄₁₆" to 2³⁄₄" 3⁵⁄₁₆" to 3¹⁄₂" O.E. CROSS INDEX (Standard) GENERAL INFORMATION CLAMPS Part No. 35723 35731 35510 35279 TM AccuSeal is a registered trademark of Torca, Auburn Hills, Mi. ● New number. 15 ACCESSORIES BAND CLAMPS LAP JOINT BUTT JOINT Connects OD to ID Pipes Connects OD to OD or ID to ID Pipes Walker MEGA Clamps Walker MEGA Clamps Size Aluminized Stainless Size Size 2 2¹/₄ 33974 33975 33230 33231 2 2¹/₄ 2 2¹/₄ 2¹/₂ 2³/₄ 3 33976 33977 33284 33226 33227 33272 2¹/₂ 2³/₄ 3 3¹/₂ 4 4 4¹/₂ 5 5 6 33285 33286 33319* 33287 33288 33321* 33289 33273 33274 33260* 33275 33276 33262* 33277 3¹/₂ 4 4 4¹/₂ 5 5 6 Aluminized Stainless Size 33978 33979 33228 33229 2 2¹/₄ 2¹/₂ 2³/₄ 3 3¹/₂ 4 36148 36149 33310 33311 33312 33240 33241 33278 33279 33280 2¹/₂ 2³/₄ 3 3¹/₂ 4 4¹/₂ 5 6 33313 33314 33315 33281 33282 33283 4¹/₂ 5 6 SEAL CLAMP® FLAT BAND CLAMPS Size Aluminized Stainless 3 — 35934 3¹/₂ 35291 35936 4 35292 35937 5 6 35293 — 35938 35939 Seal Clamp® is a registered trademark of the Donaldson Company. * Packaged Bulk 10 per carton. h h EASY SEAL® ValuSeal® 300 Series Stainless Size Stainless 4 2 35620 36419 5 2¹/₄ 35621 36420 2¹/₂ 35979 2³/₄ 3 35622 35978 3¹/₄ — — 3¹/₂ 33968 33223 3¹/₄ 35415 3³/₄ — — 3¹/₂ 35977 4 33969 33224 3³/₄ 35416 4 33980h 33981h 4 35976 5 33970 33225 4¹/₂ 35423 5 6 35975 35980 5 6 33982h — 33983h 33271 Size ValuSeal® is a registered trademark of Torca. Easy Seal® is a registered trademark of Torca. 16 TORCTITE® PREFORMED CLAMPS Size Aluminized Lap Joint Stainless Lap Joint 2¹/₂ 3 — 33967 33220 33222 h With Fiberglass Gasket. NOTE: All Clamps are Individual Packaged & Priced GENERAL INFORMATION ACCESSORIES V BAND CLAMPS Cross-Section Cummins Detroit Diesel Ford 3.13 4.00 5.00 3.00 3.00 5.00 2.75 2.75 4.00 4.00 4.00 4.00 3.50 3.50 4.00 4.25 4.00 5.00 2.75 3.00 3.50 3.50 4.25 4.00 5.00 3.00 2.75 3.00 3.50 3.50 4.00 4.00 4.00 4.00 5.00 5.00 5.00 2.50 2.75 2.75 2.75 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.50 3.50 3.50 3.50 3.50 4.00 4.00 3.40 4.25 5.25 3.40 3.40 5.25 2.92 2.92 4.12 4.12 4.25 4.25 3.63 3.94 4.12 4.12 4.19 5.32 2.92 3.32 3.69 3.94 4.12 4.19 5.32 3.26 3.82 3.47 3.75 3.94 4.12 4.25 4.32 4.97 5.25 5.25 5.33 3.26 2.92 2.92 3.82 Spec Spec 3.26 3.26 3.26 3.26 3.47 3.63 3.63 3.63 3.69 3.69 4.12 4.25 3.96 4.81 5.81 3.96 3.96 5.81 3.20 3.20 4.69 4.69 4.81 4.81 4.19 4.50 4.69 4.81 4.75 5.88 3.20 3.88 4.25 4.50 4.81 4.75 5.88 3.82 4.10 4.06 4.31 4.50 4.75 4.81 4.91 5.25 5.81 5.88 5.92 3.90 3.20 3.20 4.10 3.62 3.62 3.82 3.82 3.88 3.88 4.06 4.19 4.19 4.19 4.25 4.25 4.75 4.81 0.21 0.21 0.21 0.21 0.21 0.21 0.26 0.26 0.40 0.40 0.21 0.21 0.40 0.21 0.40 0.40 0.40 0.40 0.26 0.40 0.40 0.21 0.40 0.40 0.40 0.21 0.26 0.24 0.21 0.21 0.16 0.21 0.29 0.26 0.21 0.40 0.29 0.40 0.26 0.26 0.26 0.29 0.29 0.21 0.21 0.43 0.43 0.24 0.40 0.40 0.40 0.40 0.40 0.16 0.21 SCHOOL BUS 35449 35805 35500 35449 35449 35500 35636 35636 35131 35131 35805 35805 35520 35804 35131 35036 35290 35806 35636 35690 35496 35804 35036 35290 35806 35695 36225 35495 35494 35804 35499 35805 35641 35746 35500 35806 36213 36210 35636 35636 36225 35950 35950 35695 35695 35401 35401 35495 35520 35520 35520 35496 35496 35499 35805 Application Fits - OEM Mufflers Fits - Flared Connectors. Fits - Flared Connectors. Replaces #154977 4LF-TE0699 T-1899, TH08A64 Replaces Bluebird #1334226 1994-88 Bluebird TC2000 School Bus w/5.9L Replaces Bluebird #1250646 Bluebird All American w/Cat 3116 /Turbo Replaces Bluebird #0997791 1990-80 Bluebird School Bus w/8.2LT 3208T 3208T 3208T 3176T 3176T 3406, 3406B, 3176 6BT5.9L, 6BTA5.9L V555, V902, V903 VT555, VT-555 Manifold VT555 L10 L10 750, N, 88NT, NTC, VT 6V53, 6V71 MEDIUM DUTY TRUCK GVW 3-6 C HEAVY DUTY TRUCK GVW 7-8 B APPLICATION BY ENGINE Caterpillar A NOISE AND BACKPRESSURE DATA Bluebird Tube Unknown 4-53, 8V71, 8V92 8.2LT 6-71T, 8.2N, 8.2T, 12V71 6-71N 8V-71T, 16V-71, 6V-92T, 8V-92, 8V-92T, 16V-92T 8V-71T Series 60, 6-71T 8V-71T (End away from Turbo) Ford # E5HZ5A231B 1995-93 B600/700 w/5.9LT Replaces Ford #F3HZ5A281A Ford #E0HZ5A231B Replaces Ford #F1HZ5C210A, E9HZ5A231B 1995-89 Med/Truck/Bus w/370, 429 gas All Models w/DD 6V53, 6V71 All Models w/Cummins V555, V902 Ford D9HT-51210-DA 1988-79 Ford Med Truck/Bus w/370, 429 gas 8.2L NA Replaces Ford #E2HZ5A231A 1990-87 B600/700 School bus CF600/800 w/6.6LT Replaces Ford #E8HZ5A231E 1994-87 CF600/800, F600/800 w/7.8LT Replaces Ford #E7HZ5A231C Replaces Ford #E0HZ5A231C All Models w/DD 6-71T, 8.2N, 8.2T, 12V71 TRACTOR Airesearch Part MUFFLER SPECS Manufacturer A O.E. CROSS INDEX B TOOLS AND ACCESSORIES C 17 ACCESSORIES V BAND CLAMPS (Cont.) Manufacturer Freightliner GM Mack International/ Navistar Peterbilt Thomas 18 Part Tube A B C 35806 35806 35806 36225 35495 35495 35036 35036 35805 35804 35804 35498 35498 35805 35806 35695 36212 35496 35496 35496 35494 35494 36374 35804 35804 35804 35290 35290 35641 35641 35746 35746 35746 35806 35806 35806 35500 35520 35520 35131 35131 5.00 5.00 5.00 2.75 3.00 3.00 4.25 4.25 4.00 3.50 3.50 4.00 4.00 4.00 5.00 3.00 3.00 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 4.00 4.00 4.00 4.00 4.00 4.00 4.00 5.00 5.00 5.00 5.00 3.50 3.50 4.00 4.00 5.32 5.32 5.32 3.82 3.47 3.47 4.12 4.12 4.25 3.94 3.94 4.17 4.17 4.25 5.32 3.26 3.28 3.69 3.69 3.69 3.75 3.75 3.86 3.94 3.94 3.94 4.19 4.19 4.32 4.32 4.97 4.97 4.97 5.25 5.25 5.25 5.25 3.63 3.63 4.12 4.12 5.88 5.88 5.88 4.10 4.06 4.06 4.81 4.81 4.81 4.50 4.50 4.61 4.61 4.81 5.88 3.82 3.84 4.25 4.25 4.25 4.31 4.31 4.38 4.50 4.50 4.50 4.75 4.75 4.91 4.91 5.25 5.25 5.25 5.88 5.88 5.88 5.81 4.19 4.19 4.69 4.69 0.40 0.40 0.40 0.26 0.24 0.24 0.40 0.40 0.21 0.21 0.21 0.16 0.16 0.21 0.40 0.21 0.21 0.40 0.40 0.40 0.21 0.21 0.19 0.21 0.21 0.21 0.40 0.40 0.29 0.29 0.26 0.26 0.26 0.40 0.40 0.40 0.21 0.40 0.40 0.40 0.40 ● New Number. Application FLD Models w/DD Series 60, CAT 3406 FLD Models w/Cummins NTC, VT diesel Replaces Freightliner #0114596000 1990-80 GM Med Truck/Bus w/8.2L NA Replaces GM #2069773 Topkick/Kodiak w/6.6L Replaces GM# 15647159 All Models w/DD6-71T, 8.2N, 8.2T, 12V71 All Models w/DD 4-53, 8V71, 8V92, CAT 3208T All Models w/Cummins VT-555 Replaces Mack #48RU2341 DM/MR Models All Models w/DD 6-71T, 8.2N, 8.2T, 12V71 Replaces Mack #11ME241 Replaces Navistar #425624R91 Replaces Navistar #2033978C1 1989-86 Series S Truck/Bus w/DT360 Replaces Navistar #893944R92 Replaces International #3553803C2 Replaces Navistar #338614C1 1994-88 Series S Truck/Bus w/DT466 2001 Int’l Bus 3800 Series w/T444E Replaces Navistar #434252R91 All Models w/DD 4-53, 8V71, 8V92, CAT 3208T All Models w/Cummins VT-555 Replaces Navistar #893945R92 7.3L, DT-DTA 360, DT-DTA 466 Replaces Navistar #433192R91 All Models w/6-71N 9300 Series w/DD 8V71, 8V92 Replaces Navistar #5132650 Replaces Navistar #780067C91 2500/2600 Series w/Detroit 6-71T, Series 60, Cat 3406 Replaces Navistar #1672105C91 Replaces Navistar #390226C91 Peterbilt #14-11039 1990-84 Saf-t-liner Models w/3208T Replaces Thomas #61240207 1989-84 Thomas School Bus w/3208T Replaces Thomas #61240208 ACCESSORIES E Style A B C 41873 41645 D A 4.00 OD 3.00 ID 2.875 ID — 3.937 OD 3.78 3.50 3.00 20° 20° 41646 41659 41656 41662 41865 41862 41657 41647 41872 41864 41648 41649 35110 41860 41650 41651 41863 41652 41653 41688* C A C A A A C C C C A A A D C D C A A B 3.00 3.00 3.00 3.00 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.69 4.00 4.00 4.00 4.00 4.00 4.00 5.00 3.00 ID — 3.125 ID 3.00 ID — — 3.50 ID 3.58 ID 3.63 ID 3.63 ID — — — 3.75 OD 4.00 ID 3.50 ID 4.00 ID — — 4.50 OD 3.62 3.50 3.625 OD 3.90 OD 4.00 4.00 OD 4.00 OD 4.30 4.25 OD 4.25 OD 4.30 4.00 4.25 OD 4.25 OD 4.75 4.25 4.50 OD 4.80 4.50 5.15 OD 4.00 3.50 4.75 2.50 3.50 5.00 4.75 4.00 4.00 4.00 3.00 3.00 1.50 4.00 4.00 4.00 4.75 3.00 5.00 4.45 22° 45° 45° 20° 22° 45° 45° 20° 22° 22° 20° 45° 20° 22° 22° 20° 45° 20° 45° 20° 41654 41655 A A 5.00 OD 5.00 OD 5.50 5.72 5.00 3.00 45° 20° 41696 41689 41658 41875 35747 A A C D B 5.00 5.00 5.00 5.00 5.15 — — D Flare OD OD OD ID OD — — 5.00 ID 5.00 OD 4.55 OD 5.75 OD 5.875 5.50 OD 5.75 OD 4.81 OD 5.50 6.25 4.75 5.00 1.94 20° 20° 45° 20° 20° 41690 E 5.69 OD * With machined ring. 5.00 OD 5.00 OD 6.00 — TOOLS AND ACCESSORIES Style D Style C Part No. OD OD OD ID OD OD ID ID OD OD OD OD OD OD OD OD OD OD OD OD D D Style E Application Used w/ V-Band Clamp 35495 Ford Motor Co, Detroit Diesel 6V71, 6V73, Cummins V555, V902 Detroit Diesel 6V71 GMC Truck/Bus w/8.2N Cat 3208T Detroit Diesel Detroit Diesel 8V-71 Detroit Diesel 8V-71 Detroit Diesel 8V-71 Detroit Diesel 8V92, 4-53 Detroit Diesel Navistar Detroit Diesel 8V-71 Detroit Diesel 12V71 Detroit Diesel 8.2N, Cummins VT225 Detroit Diesel 6-71, 8.2N, 8.2T, Mack Cummins Detroit Diesel 8V-71T, 16V-71T, 6V-92T, 8V-92T Cummins Caterpillar Turbo, Cummins Turbo, Navistar Navistar T-50 Turbo Charger Detroit Diesel 8V-71T, 16V-71, 6V-92T, 8V-92T, 16V-92T Cummins Engines MEDIUM DUTY TRUCK GVW 3-6 Style B B A 35695 35695 35449 35495 35520 35494 35494 35804 35804 35804 35520 35494 — 35804 35641 35496 35805 35499 35805 35746 HEAVY DUTY TRUCK GVW 7-8 D C APPLICATION BY ENGINE Style A A C NOISE AND BACKPRESSURE DATA D B A 35500 35806 35806 35806 35500 — 35746 TRACTOR A B C 35806 MUFFLER SPECS C O.E. CROSS INDEX B A C SCHOOL BUS D GENERAL INFORMATION FLARED ADAPTERS 19 ACCESSORIES GASKET IDENTIFICATION CHARTS B B Figure 1 Gasket No. Figure 3 Figure 2 A B Gasket No. 31400c 2¹⁄₃₂ ¹⁹⁄₃₂ 31405c 2³⁄₈ ⁹⁄₁₆ 315081 2⁹⁄₁₆ ¹⁄₂ 31572 2⁹⁄₃₂ ⁹⁄₁₆ 31818 2¹⁄₂ ¹⁹⁄₃₂ 31821 2³⁄₄ ⁵⁄₈ c Shipped in lots of 10 - Std. Carton 1 Sintered Iron Material B A A A A B Gasket No. ¹⁷⁄₃₂ ²³⁄₃₂ 314171 2¹⁄₈ 315101 2⁵⁄₃₂ 1 Sintered Iron Material 31394 A B 2¹⁄₄ 2¹⁄₂ FLANGE IDENTIFICATION CHARTS B A B A Figure 1 Flange No. 31873 31887 Figure 2 A B 2¹¹⁄₃₂ 2¹⁹⁄₃₂ 3³⁄₄ 3³⁄₄ Flange No. A B Flange No. A B 31803 31850 31875 31883 2¹⁄₈ 2³⁄₈ 2⁷⁄₁₆ 2⁵⁄₈ 2³⁄₄ 3 3¹¹⁄₁₆ 3¹⁄₁₆ 31891 31923 31952 2¹⁄₈ 2¹¹⁄₁₆ 2⁵⁄₈ 2⁵⁄₈ 3 3¹⁄₄ SINGLE PIECE INSERTS 2.54" 3.05" .50" 1.50" 1.44" .53" 2.34" O.D. 1.88" O.D. 35597 Chevrolet/GMC Medium Truck/ Bus w/350 engine. 35490 Chevrolet/GMC Medium Truck/ Bus w/366, 427 engine. ALUMINIZED TILT CAB CONNECTORS BOTTOM TOP Part No. 41479 41539 20 A 5³/₄ OD 6³/₄ OD B 4 OD 5 OD C 2¹⁄₂ 3¹⁄₂ D 7 7³⁄₄ Part No. 41480 41540 A 4 ID 5 ID B 4¹⁄₂ 5¹⁄₄ ACCESSORIES I.D.-O.D. CONNECTOR TOOLS AND ACCESSORIES I.D.-I.D. CONNECTOR GENERAL INFORMATION CONNECTORS — REDUCERS Connects O.D.& I.D. pipes and/or tubing of the same size. 4¹⁄₂ 41951 2¹⁄₄-2¹⁄₄ 4 41902 41947 2-2 2-2 10 12 41957 2¹⁄₂-2¹⁄₂ 4 41967 2³⁄₄-2³⁄₄ 4 41812 3-3 4 41892 3-3 6 41954 41956 41965 41966 2¹⁄₄-2¹⁄₄ 2¹⁄₄-2¹⁄₄ 2¹⁄₂-2¹⁄₂ 2¹⁄₂-2¹⁄₂ 4¹⁄₂ 12 4¹⁄₂ 12 3¹⁄₂-3¹⁄₂ 4-4 4-4 5-5 6-6 6 4 8 8 8 42596 41811 41970 41976 2¹⁄₂-2¹⁄₂ 3-3 3-3 3-3 18 4 6 12 42606 41978 41983 42127 3-3 3¹⁄₂-3¹⁄₂ 3¹⁄₂-3¹⁄₂ 3¹⁄₂-3¹⁄₂ 18 6 12 18 41896 42891 42531 41780 41897 42126 4-4 4-4 4-4 4¹⁄₂-4¹⁄₂ 5-5 5-5 8 18 24 4³⁄₄ 8 18 42530 41889 5-5 6-6 24 8 4 41921 1⁵⁄₈-1⁵⁄₈ 4 41926 1³⁄₄-1³⁄₄ 4 41933 1⁷⁄₈-1⁷⁄₈ 4 41940 2-2 41948 O.D.-O.D. CONNECTOR Connects I.D. pipes and/or tubing of the same size. Also used on manifold outlet. REDUCING BUSHINGS Part No. 41945 41964 41971 41979 O.D. - O.D. 2-2 2¹⁄₂-2¹⁄₂ 3-3 3¹⁄₂-3¹⁄₂ Lgth. 4¹⁄₂ 4¹⁄₂ 6 6 41987 41992 4-4 5-5 8 8 Reduces the I.D. of a muffler inlet or outlet without increasing the muffler overall length. MUFFLER SPECS 41895 41899 41557 Part No. O.D. - I.D. 36275 35253 35254 1¹⁄₂-1³⁄₈ 2-1⁷⁄₈ 2¹⁄₈-2 O.E. CROSS INDEX 41893 ●51064 SCHOOL BUS 2-2 4 1¹⁄₂-1¹⁄₂ MEDIUM DUTY TRUCK GVW 3-6 41944 2¹⁄₈-2¹⁄₈ 41919 Lgth. 4 12 5 12 4 HEAVY DUTY TRUCK GVW 7-8 4 Lgth. APPLICATION BY ENGINE I.D. - O.D. 1¹⁄₂-1¹⁄₂ 1¹⁄₂-1¹⁄₂ 1³⁄₄-1³⁄₄ 1³⁄₄-1³⁄₄ 1⁷⁄₈-1⁷⁄₈ I.D. - I.D. NOISE AND BACKPRESSURE DATA Part No. 41810 41920 41882 41931 41759 Part No. TRACTOR Connects O.D. pipes and/or tubing of the same size. PACKED 6 BUSHINGS PER CARTON 21 ACCESSORIES CONNECTORS — REDUCERS I.D.-I.D. REDUCER I.D.-O.D. REDUCER Reduces O.D. Pipe and/or tubing of different size. Reduces larger O.D. pipe and/or tubing to smaller I.D. pipe. Also used as muffler bushing or manifold outlet. Part No. 41922 I.D. - I.D. 1⁵⁄₈-1¹⁄₂ Lgth. 4¹⁄₂ 41927 41929 41934 41886 1³⁄₄-1¹⁄₂ 1³⁄₄-1⁵⁄₈ 1⁷⁄₈-1³⁄₄ 2-1¹⁄₂ 4¹⁄₂ 4¹⁄₂ 4¹⁄₂ 4 41941 41943 41952 2-1³⁄₄ 2-1⁷⁄₈ 2¹⁄₄-2 4¹⁄₂ 4¹⁄₂ 4¹⁄₂ 41958 41961 41973 41687 41981 2¹⁄₂-2 2¹⁄₂-2¹⁄₄ 3-2¹⁄₂ 3-2³⁄₄ 3¹⁄₂-3 4¹⁄₂ 4¹⁄₂ 6 6 6 41989 41894 41898 41879 41998 4-3 4-3¹⁄₂ 5-4 5-4¹⁄₂ 6-5 6 6 8 6 6 Part No. 41855 41923 41928 41930 41932 41939 41942 41949 41888 41955 41854 41959 41962 41999 41974 41982 41563 41984 41909 41997 I.D. - O.D. 1¹⁄₂-1³⁄₈ 1⁵⁄₈-1¹⁄₂ 1³⁄₄-1¹⁄₂ 1³⁄₄-1⁵⁄₈ 1⁷⁄₈-1³⁄₄ 2-1³⁄₄ 2-1⁷⁄₈ 2¹⁄₈-2 2¹⁄₄-1⁷⁄₈ 2¹⁄₄-2 2¹⁄₄-2¹⁄₈ 2¹⁄₂-2 2¹⁄₂-2¹⁄₄ 2³⁄₄-2¹⁄₂ 3-2¹⁄₂ 3¹⁄₂-3 4-3 4-3¹⁄₂ 5-4 6-5 Lgth. 4 4¹⁄₂ 4¹⁄₂ 4¹⁄₂ 2⁵⁄₈ 2⁵⁄₈ 4¹⁄₂ 4¹⁄₂ 4 4¹⁄₂ 4 4¹⁄₂ 4¹⁄₂ 8 6 6 6 6 6 6 O.D.-I.D. REDUCER O.D.-O.D. REDUCER Reduces larger I.D. pipe and/or tubing to smaller O.D. pipe. Also used as muffler bushing or manifold outlet. Reduces I.D. pipe and/or tubing of different sizes. Part No. 41908 41937 41700 41917 41918 41890 41891 41845 41844 41515 22 O.D. - O.D. 2-1⁷⁄₈ 2-1¹³⁄₁₆ 2¹⁄₄-2 2¹⁄₂-2 2¹⁄₂-2¹⁄₄ 4-3 5-4 5-4¹⁄₂ 6-4 6-5 Lgth. 5¹⁄₄ 4¹⁄₂ 4¹⁄₂ 4¹⁄₂ 4¹⁄₂ 8 8 6 6 8 Part No. 41883 41924 41925 41885 41935 41946 41950 41400 41953 41960 41963 41968 41972 41975 41980 41988 41991 41994 41786 41514 O.D. - I.D. 1¹⁄₂-1³⁄₈ 1⁵⁄₈-1¹⁄₂ 1³⁄₄-1⁵⁄₈ 1⁷⁄₈-1¹⁄₂ 1⁷⁄₈-1³⁄₄ 2-1³⁄₄ 2¹⁄₈-2 2¹⁄₄-1³⁄₄ 2¹⁄₄-2 2¹⁄₂-2 2¹⁄₂-2¹⁄₄ 2³⁄₄-2¹⁄₂ 3-2¹⁄₂ 3-2³⁄₄ 3¹⁄₂-3 4-3 4-3¹⁄₂ 5-4 5-4¹⁄₂ 6-5 Lgth. 4 4¹⁄₂ 2⁵⁄₈ 4¹⁄₂ 4¹⁄₂ 5³⁄₈ 4¹⁄₂ 4¹⁄₂ 4¹⁄₂ 4¹⁄₂ 4¹⁄₂ 4¹⁄₂ 6 6 6 6 6 6 6 8 Walker Flex Pipe ® How to Order, Measure and Cut How to Measure: How to Cut: When you are ready to put Flex Pipe to use, follow these instructions for determining the length to cut the pipe. NOTE: All flexible metal tubing is measured fully extended. There are three ways to cut Flex Pipe. Select a method that suits your equipment. X" How to Order: Determine the length (X") of pipe needed for your application by measuring the gap between the two pipes you intend to connect. CHOP SAW: For best results, use a 1/16" wide blade. Make sure the Flex Pipe has the open side facing to the right. Align and secure pipe so the cut guide lines up with the Chop Saw blade, and cut. Length X" + 6" = Y" Allow a 3" overlap for each end (add 6" to the measurement from above). This is the length (Y") of Flex Pipe needed. Determine your usage needs. Flex Pipe is sold in a variety of lengths, including precut lengths. All lengths range from 1" to 6" in diameter. Refer to the chart on the reverse side to determine your desired part number. Order by part number, not by the foot. IMPORTANT: BAND SAW: For best results, use a no-set blade with 24/32 teeth/inch. Make sure Flex Pipe has the open side facing to the right. Align and secure pipe so the cut guide lines up with the Band Saw blade, and cut. Y" Open Measure distance needed from the far right side inward. Wrap area to be cut with duct tape. Use a marker to draw a cut guide on the tape. Flex Pipe is now ready to be cut. Cut through the tape. Remove tape from Flex Pipe before using. Closed When measuring and cutting, keep the open side of the Flex Pipe to your right. To determine the open end, turn the end of the pipe toward you and look for the rings to wrap on top. HACK SAW: For best results, use a no-set blade with 24/32 teeth/inch. Make sure Flex Pipe has the open side facing to the right. Align and secure pipe, and cut on the guide line. 23 ACCESSORIES FLEX TUBING 6 FOOT LENGTHSg I.D. Stain. Alz. Standard Thickness H.D. Thickness 10 FOOT LENGTHSg Galv. Standard Thickness Stain. H.D. Thickness Standard Thickness Alz. H.D. Thickness 25 FOOT LENGTHSg Galv. Standard Thickness Stain. H.D. Thickness Standard Thickness Alz. Galv. H.D. Thickness Standard Thickness H.D. Thickness 50001 1 — — — — — — — — — — 40000 1¹⁄₄ — — — — — — — — — — 40001 50002 1¹⁄₂ — — 46971✘ — — — — — — — 40002 50003 1⁵⁄₈ — — — — — — — — — — 40013 — 1³⁄₄ 2 — — — — 46972✘ 46973✘ — — — 49060 — — — 49042 — 49077 — — — — 40003 40005 50004 50005 2¹⁄₈ — — 56026✘ — — — — — — — 40014 — 2¹⁄₄ — — 46974✘ — 49061 — 49074 — — — 40006 50006 2¹⁄₂ — — 46975✘ — 49044 49081 49075 49078 40031 — 40007 40030 2³⁄₄ 3 — — — — — — — — — 49032 — 49105 49076 49089 49037 49028 — 40020 — 50010 — 40008 — 40009 3¹⁄₂ 4 5 6 — 46917 46918 — — 46915 46916 — — 46911 46912 — — 46913 46914 — 49033 49034 49035 49063 49106 49070 49071 — 49090 49091 49092 — 49029 49030 49031 49036 40021 40022 40023 50015 50011 50012 50013 — 40024 40025 40026 50009 40010 40011 40012 50008 ✘ g Fully Extended. Packed - 6 per carton, individually labeled. PRE-CUT FLEX HOSE I.D. Style ID - ID Length 12 18 24 36 Galv. — 42065 53089 54047 3" Dia. Alz. — — — — Stain. — 42492 — — Galv. — 42066 53090 54048 3¹⁄₂" Dia. Alz. — — — — Stain. — 42455 52435 53679 Length 12 18 24 36 48 Galv. 41692 42067 42069 43381 55006 4" Dia. Alz. — 52123 52128 — — Stain. 41691 42423 42338 43202 54049 Galv. 41694 42068 42070 43382 55007 5" Dia. Alz. — 52124 52129 — — Stain. 41693 42424 42339 43203 54050 O.D. I.D. Style ID - OD Length 18 Galv. 42175 Length 18 Galv. 42177 3" Dia. Alz. — 4" Dia. Alz. 52068 Stain. — Galv. 42176 3¹/₂" Dia. Alz. 52067 Stain. — Galv. 42317 5" Dia. Alz. — Stain. — Stain. — FLEX CONNECTOR Part No. 41756 24 41756 OAL 12 Inlet Dia. 4 ID Outlet Dia. 4 ID Use Clamp No. 35976 (2) GENERAL INFORMATION ACCESSORIES STANDARD STRAIGHT TUBING TOOLS AND ACCESSORIES Low Carbon Steel 10' 18 17 15 .042 0.054 0.065 1¹⁄₂ 49002 1⁵⁄₈ 49003 1³⁄₄ 49004 1⁷⁄₈ 2 49005 49006 Gauge 13 0.082 2¹⁄₈ 49013 14 0.069/0.075 Comparison of Gauge to Decimal Decimal 15 0.065 2¹⁄₂ 16 17 0.055/0.060 0.050/0.054 18 0.042 2³⁄₄ 3 3¹⁄₄ MEDIUM DUTY TRUCK GVW 3-6 2¹⁄₄ SCHOOL BUS Length Gauge Thickness OD 49058 3¹⁄₂ 4 4¹⁄₂ 5 49056 HEAVY DUTY TRUCK GVW 7-8 49015 5¹⁄₂ 6 49027 AIR INTAKE ALUMINUM TUBING APPLICATION BY ENGINE ALUMINIZED STEEL TUBING LENGTH NOISE AND BACKPRESSURE DATA 10' Size Part No. Length 4 5 49214 49215 10 10 Size Part No. 4 49200 5¹/₂ 6 7 49202 49203 49204 TRACTOR O.D. BOTH ENDS ONE END SWAGED & SLOTTED OTHER END - O.D. EXAMPLE: MUFFLER SPECS ORDER STRAIGHT TUBING BY THE PIECE: For (1) 10’ Stick, order (1) 49200 Part No. O.D. - O.D. 41987 4-4 8 44456 45339 4-4 4-4 48 60 O.E. CROSS INDEX O.D. - O.D. CONNECTING PIPE Length 25 ACCESSORIES STRAIGHT TUBING Bendable Aluminum Killed Draw Quality (AKDQ) Steel Tubing OD Low Carbon Length Gauge 7' 16 Aluminized 7' 6" 14 Thickness 0.060" 0.069" 10' 7' 6" 16 14 17 16 14 13 17 16 0.082" 0.050" 0.060" 10' 13' 14 13 17 16 14 13 14 0.060" 0.069" 0.050" 0.060" 0.075" 0.069" .082" 0.050" 0.060" 0.069" 1¹⁄₂ — — 47980 — — 49021 — — 47968 — — — 49045 49243 — — — 1³⁄₄ — — 47982 — — 49022 — — 47971 — — — 49046 49241 — — — 1⁷⁄₈ — — 47983 — — 49023 — — 47969 — — — 49057 49242 — — — 2 47993 — 47984 47989 49016 49024 49043 — — 47972 — 47960 — 49047 — 49069 — 2¹⁄₄ — 47995 — 47986 49007 — 49025 — — — 47973 47961 — — 49048 49068 — 2¹⁄₂ — 47996 — 47987 49008 — 49026 — — — 47974 47962 — — 49049 49067 — 2³⁄₄ — — — — 49009 — 49040 — — — — — — — 49195 — 49050 3 — — — — — 49010 49041 49066 — — 47963 47967 — — 49159 3¹⁄₂ — — — — — 49011 — — — — — — — ●49098 49160 — — 4 — — — — — 49012 — — — — — — — ●49099 49161 — 49052 5 — — — — — — — — — — — — — 49064 49162 — — 6 — — — — — — — — — — — — — — 49062 — — STAINLESS STEEL STRAIGHT TUBING Bendable 409 Stainless Steel Tubing Length Gauge 10’ 14 15 17 OD 2 — — 49184 2¹⁄₄ — — 49185 2¹⁄₂ — — 49186 3 49095 — — 3¹⁄₂ 49096 — — 4 49097 — — 5 — ●49263 — Note: Bending characteristics of stainless steel tubing are substantially different than low carbon steel tubing. Listed below are important factors in successfully bending stainless steel tubing. 1. 2. 3. 4. 5. 6. 26 ● New Number Wing die (back) pressure may need to be increased to prevent backwall collapse. The tube weld seam should be located 90° from the inside and outside of any severe bends. Wing dies must be in good condition and in alignment throughout the entire bending arc. Bends should be made in one continuous operation at a slow rate of speed. Bends should not be made tighter than two times pipe diameter. Equipment must be in proper operating condition. 0.082" 0.069" 49065 49051 GENERAL INFORMATION ACCESSORIES RUBBER GOODS 900 ELBOW TOOLS AND ACCESSORIES C DIMENSIONS D Part No. A B C D E F 4 36171 4 5³⁄₄ 5³⁄₄ 1¹⁄₂ 1¹⁄₂ ¹⁄₄ 5 36172 5 6 6 1¹⁄₂ 1¹⁄₂ ¹⁄₄ l5¹⁄₂ 36173 5¹⁄₂ 6¹⁄₂ 6¹⁄₂ 1³⁄₄ 1³⁄₄ ¹⁄₄ 6 36175 6 7 7 2 2 ¹⁄₄ 7 36178 7 7⁹⁄₁₆ 7⁹⁄₁₆ 2 2 ¹⁄₄ F 90° ELBOW B + SCHOOL BUS Size E A 900 SHORT RADIUS ELBOW C D F SHORT RADIUS 90° ELBOW DIMENSIONS Size Part No. A B C D E F 6 36176 6 5 5 ³⁄₄ ³⁄₄ ³⁄₄ HEAVY DUTY TRUCK GVW 7-8 B + E APPLICATION BY ENGINE A 900 REDUCER ELBOW D F DIMENSIONS Part No. A B C 6 X 5¹⁄₂ 36177 6 5¹⁄₂ 6³⁄₄ D E F G 6³⁄₄ 2 1³⁄₄ ¹⁄₄ REDUCER 90° ELBOW + NOISE AND BACKPRESSURE DATA Size B C MEDIUM DUTY TRUCK GVW 3-6 l Not recommended for use on Cummins 1710 engine. + E G TRACTOR A 450 ELBOW C DIMENSIONS Part No. A B 4 36164 4 45 ¹⁄₄ 1¹⁵⁄₃₂ 1¹⁵⁄₃₂ 36168 5¹⁄₂ 0 45 ¹⁄₄ 1¹¹⁄₁₆ 1¹¹⁄₁₆ 36166 6 450 ¹⁄₄ 1³⁄₄ 1³⁄₄ 6 0 D E B MUFFLER SPECS Size l5¹⁄₂ C D 45° ELBOW E O.E. CROSS INDEX A l Not recommended for use on Cummins 1710 engine. 27 ACCESSORIES RUBBER GOODS (Cont.) HUMP HOSE C DIMENSIONS A D B HUMP HOSE Size Part No. A B C D 4 36183 4 5¹⁄₄ 2 ¹⁄₄ 5¹⁄₂ 36185 5¹⁄₂ 6 2¹⁄₄ ¹⁄₄ 6 36186 6 7 2³⁄₄ ¹⁄₄ 7 36187 7 7 2¹⁄₂ ⁵⁄₁₆ REDUCER INSERT REDUCER INSERT C B DIMENSIONS A F E D Size Part No. A B C D E F G 5X4 36190 5¹⁄₂ 5 4 1³⁄₄ ¹⁄₄ ¹⁄₂ 450 5¹⁄₂ X 5 36193 6 5¹⁄₂ 5 1³⁄₄ ¹⁄₄ ¹⁄₄ 450 G AIR LINE CLAMPS 28 Size Part No. Size Part No. 3 36203 5¹⁄₂ 36201 3¹⁄₂ 4 5 36202 36204 36205 6 7 8 36206 36207 36208 ACCESSORIES 29120 29505 29700 29100 29205 29304 29416 29111 29206 29305 29408 29508 29600 29702 29800 29112 29207 29306 29409 29509 29603 29701 29801 29901 29118 — Angle ID Length ALZ. Chrome 3 OD 3¹⁄₂ OD 3¹⁄₂ OD 3¹⁄₂ OD 4 OD 4 OD 4 OD 4 OD 4 OD 4 OD 4 OD 4 OD 4 OD 5 OD 5 OD 5 OD 5 OD 5 OD 5 OD 5 OD 5 OD 5 OD 6 OD 6 OD 6 OD 48 24 36 48 18 24 36 48 60 69¹⁄₂ 72 84 96 18 24 36 48 60 69¹⁄₂ 72 84 96 18 36 48 44302 42132 — 44634 42129 42544 43718 44637 45726 46958 — — — 42130 42543 43719 44638 45727 46954 — — — 42594 — — — 29204 29302 29406 29101 29201 29307 29402 29502 — 29605 29704 29806 29102 29202 29308 29403 29503 — 29604 29705 29807 — 29327 29434 TOOLS AND ACCESSORIES 42262 — — 42263 — 53053 — 42715 42071 43320 44299 45233 46896 — — 42716 42072 43321 44300 45246 — — — — 42128 53054 Inlet Dia. SCHOOL BUS Chrome MEDIUM DUTY TRUCK GVW 3-6 18 60 84 18 24 36 48 18 24 36 48 60 72 84 96 18 24 36 48 60 72 84 96 108 18 36 ALZ. Angle OD Slant Cut ID Inlet Dia. 4 OD 5 OD 5 OD 5 OD 5 ID 6 OD 6 OD ID OD Slant Cut Length Chrome Style 36 36 48 60 96 36 48 29300 29301 29405 29511 29802 29325 29437 OD OD OD OD ID OD OD Monster Stacks Inlet Dia. 6-5 6-5 6-5 6-5 ID ID OD ID Length Chrome Style 96 108 96 96 29804 29902 29809 29805 OD OD OD ID O.E. CROSS INDEX Slant Cut OD MUFFLER SPECS TRACTOR NOISE AND BACKPRESSURE DATA 3 ID 3 ID 3 ID 3¹⁄₂ ID 3¹⁄₂ ID 3¹⁄₂ ID 3¹⁄₂ ID 4 ID 4 ID 4 ID 4 ID 4 ID 4 ID 4 ID 4 ID 5 ID 5 ID 5 ID 5 ID 5 ID 5 ID 5 ID 5 ID 5 ID 6 ID 6 ID Length APPLICATION BY ENGINE Inlet Dia. Angled (OD) HEAVY DUTY TRUCK GVW 7-8 Angled (ID) GENERAL INFORMATION STACK PIPES 29 ACCESSORIES STACK PIPES (Cont.) Square Cut (ID) Square Cut ID Inlet Dia. Length ALZ. Chrome 2¹⁄₂ ID 3 ID 3 ID 3 ID 3 ID 3¹⁄₂ ID 3¹⁄₂ ID 3¹⁄₂ ID 4 ID 4 ID 4 ID 4 ID 4 ID 4 ID 5 ID 5 ID 5 ID 5 ID 5 ID 6 ID 18 18 24 36 48 18 36 48 18 24 36 48 60 72 18 24 36 48 60 48 42596 42606 42178 43606 44301 42127 43366 44308 42891 42531 43319 44126 45066 46892 42126 42530 43582 44127 46778 44303 — — — — 29410 — — — — — 29314 29414 29506 — — 29213 29315 29415 29507 — Square Cut (OD)* Inlet Dia. Length ALZ. Chrome 4 OD 4 OD 4 OD 5 OD 36 48 60 36 — 44456 45339 53049 29309 — 29500 29310 5 OD 5 OD 6 OD 48 60 36 44457 45340 — 29401 29501 29326 6 OD 48 — 29433 Square Cut OD * For additional OD sizes and lengths use Straight Tubing. OTHER STACK PIPES B C C A B A 2 1 Inlet Dia. 30 Style A B C Length ALZ. Chrome Replaces OE No. 4 ID 1 6⁷/₈ 1¹/₂ 30¹/₂ 48¹/₂ 45320 — 532395C1 4 OD 1 11 10 29 51 45758 — — 5 OD 1 11 10 30 60 45800 — — 4 OD 2 8¹/₂ 12 22 30¹/₂ 43587 29208 — 5 OD 2 8 11 21¹/₂ 29¹/₂ 43588 29214 — ALZ Aluminized ACCESSORIES Style A (OD) TOOLS AND ACCESSORIES GENERAL INFORMATION TAIL SPOUTS CHROME STYLE A STYLE B 3 3 12 18 41095 — 42448 — 29135 — — 29120 3¹/₂ 3¹/₂ 4 12 18 12 41096 — 41097 42449 — 42447 — — 29139 29138 29100 29140 4 18 42129 42715 — 29111 5 5 6 18 20 18 42130 — 42594 42716 42377 42128 — — — 29112 — — STYLE B SILENT RAIN CAPS Chrome 1¹/₄ 35608 — 1¹/₂ 35225 — 1³/₄ 2 35226 35512 — — 2¹/₄ 35513 — 2¹/₂ 35514 — 2³/₄ 35617 — 3 35618 — 3¹/₂ 4 35619 35907 — 35931 4¹/₂ 35909 — 5 35910 35932 5¹/₂ 35164 — 5³/₄ 35393 — Size Chrome 4 5 36158 36160 MUFFLER SPECS Standard O.E. CROSS INDEX Size TRACTOR NOISE AND BACKPRESSURE DATA RAIN CAPS STYLE A MEDIUM DUTY TRUCK GVW 3-6 LENGTH HEAVY DUTY TRUCK GVW 7-8 DIA. APPLICATION BY ENGINE ALUMINIZED STEEL SCHOOL BUS Style B (ID) 31 ACCESSORIES 15° ELBOW Style OD-OD 20° ELBOW Style ID-OD Centerline Radius D. O. B A I.D. B A Centerline Radius O.D. Aluminized Part No. Dia. OD Length A-B Centerline Radius 4 5 2-2 4-4 8 8 41204 41217 S O.D. 30° ELBOW Style ID-OD D. O. ALZ. Dia. Style 1¹/₂ 1³/₄ ID-OD ID-OD 6-6 6-6 4 4 41813 41814 1⁷/₈ 2 2¹/₄ 2¹/₂ ID-OD ID-OD ID-OD ID-OD 6-6 6-6 6-6 6-6 4 4 4 4 41815 41816 41817 41818 30° ELBOW Style OD-OD Centerline Radius A-B Length Radius Centerline Radius D. O. O.D. I.D. B B A Dia. 3¹/₂ 4 5 Length A-B Radius 4-4 4-4 4-4 5 5 6 A ALZ. Dia. Length A-B Radius ALZ. 41618 41619 41620 3¹/₂ 4 5 4-4 4-4 4-4 5 5 6 41614 41615 41616 Chrome B 45° ELBOW Style ID-OD O.D. Centerline Radius A I.D. 32 ALZ Aluminized Style O Sty Dia. Style 1¹/₂ 1³/₄ 1⁷/₈ 2 2¹/₄ 2¹/₂ 2¹/₂ 2³/₄ 3 3¹/₂ 3¹/₂ 4 4 4 4 4 5 5 5 5 5 5 6 ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD ID-OD Length A-B Radius ALZ. 6-6 6-6 6-6 6-6 6-6 6-6 6-6 6-6 7-7 8-8 9¹/₄-9¹/₄ 5-5 6-6 9¹/₄-9¹/₄ 9⁵/₁₆-9⁵/₁₆ 12-12 6-6 7-7 8-8 12-12 12-12 15-15 7-7 4 4 4 4 4¹/₂ 4 5 5 6 7 7 4 6 5 8 6 5¹/₂ 8 10 8 10 8 10 41733 41734 41735 41187 41188 41437+ 41189 41439 42760+ 42761+ — 41639 41686 — 42758+ 42246+ 41640+ 42355+ 41477 42855+ 42453+ 53042 52053 — — — — — — — — — — — — — 29113 29126 29143+ — — 29220+ — 29200 — — ACCESSORIES GENERAL INFORMATION 45° ELBOWS D. O. Centerline Radius Radius ALZ. Chrome 6-6 6-6 4-4 7-7 8-8 6-6 8-8 8-8 12-12 8-8 8-8 8-8 15-15 7-7 4 5 3 6 7 6 5 8 6 5¹/₂ 8 10 8 10 41438+ 41440 41641+ 41428+ 41429+ 41632+ 41430+ 41475+ 42247+ 41612+ 41431 41476+ 42249 52134+ — — — — — — — — 29144+ — 29105+ — 29218 — OD-OD OD-OD OD-OD OD-OD OD-OD OD-OD OD-OD OD-OD OD-OD OD-OD OD-OD OD-OD OD-OD OD-OD 60° ELBOW Style ID-OD MEDIUM DUTY TRUCK GVW 3-6 2¹/₂ 2³/₄ 3 3 3¹/₂ 4 4 4 4 5 5 5 5 6 Length A-B HEAVY DUTY TRUCK GVW 7-8 Style SCHOOL BUS Style OD-OD B Dia. TOOLS AND ACCESSORIES A O.D. Centerline Radius Centerline Radius . .D APPLICATION BY ENGINE 60° ELBOW Style OD-OD D. O. O O.D. I.D. A ALZ. Dia. Length A-B 3¹/₂ 4 5 8-8 8-8 8-8 5 5 6 41626 41627 41628 3¹/₂ 4 5 8-8 8-8 8-8 5 5 6 41622 41623 41624 . D. Centerline Radius B B I.D. O.D. Dia. Length A-B Radius LCS ALZ. Chrome Dia. Length A-B Radius 5 7¹/₂-11 8 — 42856 29209 5 7¹/₂-11 8 LCS Low Carbon Steel + Mandrel Bent. O.E. CROSS INDEX A A ALZ Aluminized ALZ. 70° ELBOWS Style ID-OD O. Centerline Radius Radius TRACTOR Radius MUFFLER SPECS Length A-B O.D Dia. 67° ELBOWS Style OD-OD NOISE AND BACKPRESSURE DATA B B A ALZ. 42252 33 ACCESSORIES 90° ELBOWS B B O.D. Centerline Radius Centerline Radius A A I.D. O.D. Style ID-OD Dia. 1¹⁄₂ 1³⁄₄ 1⁷⁄₈ 2 2¹⁄₄ 2¹⁄₂ 2³⁄₄ 3 3¹⁄₂ 4 4¹⁄₂ 5 6 34 O.D. Centerline Length A-B Rad. ALZ. 6³⁄₈-6³⁄₈ 6³⁄₈-6³⁄₈ 6³⁄₈-6³⁄₈ 6³⁄₈-6³⁄₈ 7⁷⁄₈-6³⁄₈ 9-9 6-6 6¹⁄₄-6¹⁄₄ 12-12 6³⁄₈-6³⁄₈ 12-12 8-8 10-12 12-12 12¹⁄₂-12¹⁄₂ 14-14 14-14 6¹⁄₂-6¹⁄₂ 10¹⁄₄-10¹⁄₄ 9-9 16-16 6-6 8¹⁄₂-13 10-10 10-10 12-12 16-16 18-18 25-32 13-13 8¹⁄₂-8¹⁄₂ 9¹⁄₂-9¹⁄₂ 10-10 11¹⁄₂-26³⁄₄ 12-12 15-15 15-15 15¹⁄₂-15¹⁄₂ 16¹⁄₂-16¹⁄₂ 18-18 32-25 12-12 15-15 26-26 4 4 4 4 4 4¹⁄₂ 4 4 5 5 5 6 5 5 6 8 6 3¹⁄₂ 5 7 5 4 5 5 8 6 8 8 8 6 6 5¹⁄₂ 8 5¹⁄₂ 6 5¹⁄₂ 8 10 10 10 8 10 10 10 41231 41000 41230 41001 41154 41558+ 41098 41002 41441 41099 41442+ 41365+ 41535+ 41534+ — 42759+ 42445+ 41633+ 41768 41366+ 42185+ 41630+ 42085 41378+ 41367+ 41472 53094+ 42937+ 43168+ 42356+ 41769 42763+ — 43613 41532+ 42272+ 42858+ — 43348+ 42938+ 43438+ 52058 42944+ 44569+ ALZ Aluminized. Style OD-OD Chrome Stainless — — — — — — — — — — — 29145+ — — 29116 — — — — — — — — 29146+ — 29109 29211+ — — — — 29108+ 29212+ — 29210+ — 29147+ 29129 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 52059 — — — — — — — — — — — — — — — — — + Dia. 2 2¹⁄₄ 2¹⁄₂ 2³⁄₄ 3 3¹⁄₂ 4 5 6 Mandrel Bent. Centerline Length A-B Rad. ALZ Chrome 9-9 12-12 12-12 12-12 3-3 6-6 7-7 10-10 14-14 3¹⁄₂-3¹⁄₂ 6-6 6¹⁄₂-6¹⁄₂ 12-12 16-16 4-4 7-7 8-8 8¹⁄₄-10¹⁄₂ 9-16 10-10 10-13¹⁄₂ 12-12 12-12 16-16 18-18 22¹⁄₂-30 5-5 7¹⁄₂-7¹⁄₂ 7¹⁄₂-13¹⁄₂ 8¹⁄₂-8¹⁄₂ 9-11¹⁄₂ 8¹³⁄₃₂-12⁵⁄₈ 8³⁄₄-14¹⁄₄ 9¹⁄₂-9¹⁄₂ 10-16 11-16 12-12 15-15 12-12 15-15 17¹⁄₂-17¹⁄₂ 18-18 6¹⁄₂-6¹⁄₂ 10-10 12-12 15-15 4¹⁄₂ 5 5 5 3 3 3 6 8 3¹⁄₂ 3¹⁄₂ 3¹⁄₂ 7 8 4 5 4 4 5 6 6 5 6 8 8 8 5¹⁄₂ 6 5¹⁄₂ 6 5¹⁄₂ 6 5¹⁄₂ 6 6 5¹⁄₂ 6 5¹⁄₂ 8 8 10 10 6¹⁄₂ 10 10 10 41631 41762 41432+ 41433+ 41221+ 41685+ 41536+ 41434+ 42344+ 41222+ 41537+ 41637+ 41435 42288+ 41223+ 41256+ 41474+ 52138+ 42936+ 52119+ 42407+ 41638+ 41473+ 43698+ 42857 44112+ 41224+ 52135+ 42253+ 41538+ 53095 42081 42186 41832+ 42147+ 42125+ 41436+ 42274+ — 42939+ 43699+ 42940+ 41583+ 41559+ 41560+ 42562+ — — — — — — — — — — — — — — — 29103+ — — — 29127 — — — 29150 — — — — — — — — — 29151+ — — — — 29121+ — — — — — — — GENERAL INFORMATION ALUMINIZED EXHAUST COMPONENTS FORD Replaces FORD Part No. D5HZ-5246AC Inlet Pipe RH Replaces FORD Part No. D8HZ-5246M Inlet Pipe TOOLS AND ACCESSORIES L, LN, LNT, LT, LTS 8000 Series with Caterpillar 3208N Engines L, LN, LNT, LT 9000 Series with Cummins NTC Engines. 20° 5.75" O.D. x 20° Flare. 2.75" O.D. 3.25" O.D. x 45° Flare with 3 Hole Flange 5" O.D. SCHOOL BUS 90° Pyrometer Fitting 41603 Requires 35806 V-Clamp 42211 L, LT 9000 Series with Cummins NTC Engines L, LN, LNT, LT, LTS 8000 Series with Caterpillar 3208T Engines. 4" O.D. MEDIUM DUTY TRUCK GVW 3-6 Replaces FORD Part No. E0HZ-5A212G Extension Replaces FORD Part No. E2HZ-5246D Inlet Pipe 68° 80° 33° 70° 50° 5" O.D. 50° 4" O.D. 10° 90° 80° 5" O.D. 90° 4" O.D. 30° HEAVY DUTY TRUCK GVW 7-8 Replaces FORD Part No. E7HZ-5255D Extension 44335 Requires 35495 V-Clamp Replaces FORD Part No. D8HZ-5A212-BT Extension Pipe 45263 Replaces FORD Part No. E2HZ-5A212-F Extension Pipe Replaces FORD Part No. F2HZ-5A212-B Extension Pipe 5" OD 5" OD 60° 50° 40° 80° 4" OD 40° 90° 4" OD 80° 80° 90° TRACTOR 90° 5" OD 5" OD 54590 Replaces FORD Part No. E2HZ-5A212-C Extension Pipe Replaces FORD Part No. E0HZ-5A212-B Extension Pipe 54591 Replaces FORD Part No. E2HZ-51212-BA Extension Pipe 5" OD 50° 4" OD 5" OD 80° 80° 4" OD 80° 5" OD 90° 54594 O.E. CROSS INDEX 45° MUFFLER SPECS 54589 90° NOISE AND BACKPRESSURE DATA 42369 Requires 41691 Flex on Outlet End to replace OE APPLICATION BY ENGINE 3.5" O.D. x 20° Flare. 90° 5" OD 180° 90° 90° 55458 55459 ● New number. 35 ALUMINIZED EXHAUST COMPONENTS FREIGHTLINER Replaces FREIGHTLINER Part No. 04-09586-015 Elbow Replaces FREIGHTLINER Part No. 04-09657-015 Chrome Elbow Replaces FREIGHTLINER Part No. 04-09586-017 Elbow 5" O.D. 5" O.D. 5" OD 5" O.D. 5" O.D. 90° 90° 90° 5" OD 29252 42081 Replaces FREIGHTLINER Part No. 04-09833-006 Elbow 42186 Replaces FREIGHTLINER Part No. 04-11284-000 Elbow 5" O.D. Replaces FREIGHTLINER Part No. 04-15652-000 Extension Pipe 5" O.D. 5" ID 100° 90° 5" I.D. 60° 12° 5" OD 5" O.D. 43613 51037 Replaces FREIGHTLINER Part No. 04-15653-000 Extension Pipe 30° 52032 Replaces FREIGHTLINER Part No. 04-17094-012 Front Pipe 5.88" OD x 20° Flare Replaces FREIGHTLINER Part No. 04-15077-000 Intermediate Pipe 5" OD 5" O.D. 90° 90° 100° 90° 52369 Requires 35806 V-Clamp 52033 Replaces FREIGHTLINER Part No. 04-15077-003 Intermediate Pipe 52371 Replaces FREIGHTLINER Part No. 04-17094-013 Front Pipe 5.88" OD x 20° Flare 5" OD 36° 5" OD 5" O.D. Pyrometer Fitting Replaces FREIGHTLINER Part No. 04-14120-00 Front Pipe 5.75" OD x 20° Flare 5" OD 90° 90° 90° 90° 5" OD 36° 5" OD 52372 ● New number. 36 52373 Requires 35806 V-Clamp 5" ID 52374 Requires 35806 V-Clamp Replaces FREIGHTLINER Part No. 04-13110-032 Elbow GENERAL INFORMATION ALUMINIZED EXHAUST COMPONENTS FREIGHTLINER (Cont.) TOOLS AND ACCESSORIES Replaces FREIGHTLINER Part No. 04-09586-013 Elbow 5" O.D. 5" O.D. 5" O.D. 90° 5" O.D. 52375 53095 Replaces FREIGHTLINER Part No. 04-12399-000 Extension Pipe Replaces FREIGHTLINER Part No. 04-19025-000 Front Pipe MEDIUM DUTY TRUCK GVW 3-6 Replaces FREIGHTLINER Part No. 04-17094-014 Front Pipe 5.88" OD x 20° Flare SCHOOL BUS 90° 4⁵⁄₈" O.D. 5" OD 32° 90° 90° 5" OD 53570 Requires 35806 V-Clamp 4" O.D. ●53631 53593 HEAVY DUTY TRUCK GVW 7-8 31° 5" OD APPLICATION BY ENGINE 1988-90 Freightliner Conventional IE with Dual Exhaust, 40" Sleeper, and Caterpillar 3406B Engine #6 #5 #8 #8 #7 NOISE AND BACKPRESSURE DATA #7 #4 #3 #9 #1 - Exhaust Pipe Part No. N.A. Freightliner Part No. AO4-14120-000 #6 - Left Exhaust Pipe Part No. N.A. Freightliner Part No. 04-15077-003 #2 - Exhaust Pipe Part No. N.A. Freightliner Part No. AO4-13110-032 #7 - Exhaust Pipe Part No. 41833 Freightliner Part No. 04-13315-000 #3 Exhaust Pipe Part No. N.A. Freightliner Part No. AO4-13973-000 #8 - Flex Pipe 5" x 12" Part No. See Page 31. #4 - Y Exhaust Pipe Part No. 54046 Freightliner Part No. AO4-13974-000 #9 - Flex Pipe 5" I.D. x 14" Part No. See Page 31. (CUT TO LENGTH) MUFFLER SPECS System Requires Twelve (12) Lap Joint Clamps Part No. 33276 O.E. CROSS INDEX #1 TRACTOR #2 #5 - Right Exhaust Pipe Part No. N.A. Freightliner Part No. 04-15077-000 ● New number. 37 ALUMINIZED EXHAUST COMPONENTS GMC Replaces GMC Part No. 2353719 Tail Pipe Replaces GMC Part No. 2090694 3" O.D. Replaces GMC Part No. 2046594 Extension 4" O.D. 3.9" O.D. x 20° Flare. 4" O.D. x 90° Flare. 3" I.D. 4" O.D. 6" CLR 40358 Requires 35495 V-Clamp 41662 Requires 35495 V-Clamp 41097 KENWORTH Replaces KENWORTH Part No. K180-10742RCP Chrome Connector Pipe (Right Hand) Replaces KENWORTH Part No. K180-15593 Elbow Replaces KENWORTH Part No. K180-10742LCP Chrome Connector Pipe (Left Hand) 5" O.D. 5" OD 21° 5" ID 90° 90° 90° 5" ID 21° 5" O.D. 5" OD 29255 29256 41436 Replaces KENWORTH Part No. K180-8048 Replaces KENWORTH Part No. K16948-012 5" O.D. Replaces KENWORTH Part No. K180-14764R RH Extension Pipe 5" O.D. 50° 5" O.D. 5" I.D. 90° 5" I.D. 44° 90° 5" O.D. 42186 42855 53017 Replaces KENWORTH Part No. K180-14764L (See Kmex) Replaces KENWORTH Part No. K180-10742R Connector Pipe (Right Hand) Replaces KENWORTH Part No. K180-10742L Connector Pipe (Left Hand) 5" OD 5" I.D. 45° 21° 90° 5" O.D. 5" ID 90° 5" ID 90° 21° 5" OD 53018 38 53640 53642 GENERAL INFORMATION ALUMINIZED EXHAUST COMPONENTS KENWORTH (Cont.) SCHOOL BUS TOOLS AND ACCESSORIES Model T-800 - Mexico Kenworth (Kmex) #2 #1 MEDIUM DUTY TRUCK GVW 3-6 #5 #4 HEAVY DUTY TRUCK GVW 7-8 #3 APPLICATION BY ENGINE #4 #2 - Left Exhaust Pipe Part No. 53018 Kenworth Part No. K180-14764L #5 - Exhaust Pipe Part No. 54044 Kenworth Part No. K180-14766 #3 - Exhaust Pipe Part No. N.A. Kenworth Part No. K180-14122 #6 - Turbo Pipe Part No. N.A. MUFFLER SPECS #4 - Flex Pipe Part No. (SEE CUT TO LENGTH FLEX) O.E. CROSS INDEX #1 - Right Exhaust Pipe Part No. 53017 Kenworth Part No. K180-14764R TRACTOR NOISE AND BACKPRESSURE DATA #6 39 ALUMINIZED EXHAUST COMPONENTS MACK Replaces MACK Part No. 4ME21408 Stainless Steel Flexible Tubing Replaces MACK Part No. 4ME32603 R Model—Intermediate Pipe Replaces MACK Part No. 4ME21698 Cruiser Liner R Model—Front Pipe R & RD Models EM6-237, EM6-237R, ENDT675, END864 Engines with Frame Mounted Muffler R & RD Models EM6-237, EM6-237R, ENDT675, END864 Engines with Frame Mounted Muffler 4.437" O.D. x 90° Flare 4.75" O.D. x 20° Flare 4.75" O.D. x 20° Flare 40° 4" O.D. 10° 4" O.D. 4" I.D. 45° 15° Pyrometer Fitting 41508 42978 43362 Replaces MACK Part No. 4ME4658 Replaces MACK Part No. 4ME232612 R Model - Round Fuel Tanks 90° 65° 90° 15° 80° 10° 4" O.D. 75° 50° 4" O.D. 4" O.D. 4" O.D. 44203 44305 Replaces MACK Part No. 4ME31942PI DM 600 Series 4.44" O.D. x 90° Flare 4.75" O.D. x 70° Flare 4" O.D. 65° 90° 4.5" O.D. 54039 INTERNATIONAL/NAVISTAR Replaces INTERNATIONAL Part No. 503841C1 Elbow Replaces NAVISTAR Part No. 598-276-C1 Elbow Replaces NAVISTAR Part No. 449-814-C1 Turbo Connector 4" O.D. 5" O.D. 5" O.D. 5" O.D. 90° 5.74" O.D. x 20° Flare 90° 4" O.D. 41436 40 41638 41696 Requires 35806 V-Clamp Pyrometer Fitting Replaces INTERNATIONAL Part No. 582177C1 Turbo Down Pipe 4" O.D. 5" OD 20° Pyrometer Fitting 4" O.D. 5" OD TOOLS AND ACCESSORIES Replaces NAVISTAR Part No. 477-662-C1 Elbow Replaces INTERNATIONAL Part No. 1652937C1 Turbo Down Pipe GENERAL INFORMATION ALUMINIZED EXHAUST COMPONENTS INTERNATIONAL/NAVISTAR (Cont.) 90° 75° SCHOOL BUS 40° 5.75" OD x 20° Flare 5.75" OD x 20° Flare 52362 Requires 35806 V-Clamp 52138 Replaces INTERNATIONAL Part No. 167907C3 or 167390C1 Front Pipe Replaces INTERNATIONAL Part No. 500342C1 or 399322C1 Front Pipe 5.88" OD x 20° Flare Pyrometer Fitting Replaces INTERNATIONAL Part No. 582167C1 Turbo Pipe MEDIUM DUTY TRUCK GVW 3-6 51035 Requires 35806 V-Clamp Pyrometer Fitting 80° 5" OD 75° 5" OD 90° Pyrometer Fitting 5" OD 5.75" OD x 20° Flare 52380 Requires 35806 V-Clamp Replaces INTERNATIONAL Part No. 503845C1 Extension Pipe 53543 Requires 35408 V-Clamp Replaces INTERNATIONAL Part No. 582181C1 Turbo Pipe 5" OD APPLICATION BY ENGINE 52379 Requires 35806 V-Clamp Replaces INTERNATIONAL Part No. 447832C1 Rear Pipe Pyrometer Fitting 166° 5.75" OD x 20° Flare 113° 90° 90° 96° 5" OD 160° TRACTOR 5" OD 5" OD 53545 Requires 35806 V-Clamp 53546 Replaces INTERNATIONAL Part No. 437040C1 Extension Pipe Replaces INTERNATIONAL Part No. 1657101C2 or 1657101C1 Extension Pipe Replaces INTERNATIONAL Part No. 447835C1 Front Pipe MUFFLER SPECS 53544 5.75" OD x 20° Flare 5" OD NOISE AND BACKPRESSURE DATA 140° 62° 59° HEAVY DUTY TRUCK GVW 7-8 5.88" OD x 20° Flare 5" OD 40° 5" OD 5" OD 5" OD 82° 53581 53582 53584 Requires 35806 V-Clamp 41 O.E. CROSS INDEX 35° 90° ALUMINIZED EXHAUST COMPONENTS INTERNATIONAL/NAVISTAR (Cont.) Replaces INTERNATIONAL Part No. 1657118C2, 1657118C1 Extension Pipe Replaces INTERNATIONAL Part No. 475306C2 Turbo Pipe Replaces NAVISTAR Part No. 532397C1 Stack Pipe 5" OD 5.75" OD x 20° Flare 5" OD 90° 39° 44° 5" OD 7° 90° 7° 5" OD 53585 Requires 35806 V-Clamp 5" ID 54576 54577 Replaces INTERNATIONAL Part No. 532383C1 Extension Pipe Replaces INTERNATIONAL Part No. 35548324C1 Front Pipe 4¹⁄₈" OD w/Pyrometer Fitting 5" OD 90° 40° 3¹⁄₂" OD ●54652 ● New number. 42 5" OD 55451 GENERAL INFORMATION ALUMINIZED EXHAUST COMPONENTS PETERBILT TOOLS AND ACCESSORIES Replaces PETERBILT Part No. 14-04055 Replaces PETERBILT Part No. 14-13056C Chrome Elbow 5" O.D. 5" O.D. 90° 90° 57° 45° SCHOOL BUS 5" O.D. 5" O.D. 5" I.D. ●29261 40577 Replaces PETERBILT Part No. 14-13055 Y-Pipe 16 ga. MEDIUM DUTY TRUCK GVW 3-6 Replaces PETERBILT Part No. 14-10726 5" O.D. 22° 5" O.D. 5" O.D. 70° 40° HEAVY DUTY TRUCK GVW 7-8 5" O.D. 5" I.D. 42856 29209 (Chrome) 40590 Replaces PETERBILT Part No. 14-15353-0150 Part No. 14-13944-0150 Y-Pipe 5" O.D. 5" O.D. 5" O.D. 139° 90° 90° NOISE AND BACKPRESSURE DATA 90° APPLICATION BY ENGINE Replaces PETERBILT Part No. 14-08525 5" O.D. 5" O.D. ●50561 52135 TRACTOR Replaces PETERBILT Part No. 14-08527 4" O.D. 4" O.D. MUFFLER SPECS 90° O.E. CROSS INDEX 52138 ● New number. 43 ALUMINIZED EXHAUST COMPONENTS STERLING Replaces STERLING Part No. 04-19210-000 or 04-19734-000 Turbo Pipe Replaces STERLING Part No. 14-19734-000 Turbo Pipe Pyrometer Fitting 4.5" OD 5.75" OD or 20° Flare 40° 30° 4" OD 28° 40° 5" OD 52386 Requires 35806 V-Clamp 53596 Replaces STERLING Part No. 04-19752-000 Extension Pipe Replaces STERLING Part No. 04-19732-000 Turbo Pipe 4.5" OD 90° 50° 18° 99° 87° 4" OD 4" OD 14° 54592 54593 Replaces STERLING Part No. 04-19750-000 Extension Pipe 83° 32° 29° 5" OD 55453 44 5" OD 4" OD Replaces WESTERN STAR Part No. 23527-3440 Chrome Elbow 5" ID Replaces WESTERN STAR Part No. 23527-3438 Y Pipe 5" ID 40° 40° 5" OD 5" OD 90° 85° 90° 5" ID 5" OD 5" OD Replaces WESTERN STAR Part No. 23529-3444 Y Pipe 29253 40637 Replaces WESTERN STAR Part No. 23529-3542 Y Pipe Replaces WESTERN STAR Part No. 23517-3520 Front Pipe 5" OD 5" OD 5" OD 5.70" OD x 20° Flare 5" OD 90° 90° 90° Pyrometer Fitting 40° 40° 90° 5" OD 5" OD HEAVY DUTY TRUCK GVW 7-8 29152 MEDIUM DUTY TRUCK GVW 3-6 SCHOOL BUS 90° 40° TOOLS AND ACCESSORIES Replaces WESTERN STAR Part No. 23529-3540 Chrome Elbow GENERAL INFORMATION ALUMINIZED EXHAUST COMPONENTS WESTERN STAR 40638 40639 APPLICATION BY ENGINE 5" ID 52370 Replaces WESTERN STAR Part No. 23517-3525 Extension Pipe NOISE AND BACKPRESSURE DATA Replaces WESTERN STAR Part No. 23529-3478 5" OD 5" OD 5" OD 28° 80° 70° MUFFLER SPECS 54610 O.E. CROSS INDEX 53594 TRACTOR 5" OD 45 ACCESSORIES UNIVERSAL HEAVY DUTY HANGERS & BRACKET For use on 4"—5" OD Applications Part. No. Length 35530 35556 9¹⁄₄ 14 SWIVEL HANGERS Specially designed hanger, engineered to solve essentially any hanger problem. Hanger swings from 0° to ± 45° and also has complete 360° rotation Part. No. Length 35103 35898 9¹⁄₂ 17 SPLITTER “T” ADAPTER PIPE Converts a single system into a dual system on popular diesel engines. Part No. w/o Bracket Part No. w/Bracket A B C D 40221 — — — 40247 40364 4 OD 4 OD 5 OD 4 ID 4 ID 5 ID 12 11¹⁄₄ 15 20 18³⁄₄ 24³⁄₄ 40220 40223 — — 5 OD 5 OD 5 OD 5 ID 11 13¹⁄₂ 19 22 CONVENTIONAL “Y” PIPE O.E. replacement on various models of trucks. Can be used to convert dual to single exhaust. 46 Part No. A B C D 40219 4 ID 3 OD 8¹⁄₂ 14 40256 40257 4 ID 5 ID 4 OD 5 OD 11 11¹⁄₂ 16 16 GENERAL INFORMATION ACCESSORIES MUFFLER HANGERS Part No. Style Fits Body Diameter 35745 35854 35855 35338 35856 35972 35983 35733 35984 35899 36209 36448 B A A A A A A A A A C A 7—8³⁄₈ 6 7 8 8¹⁄₂ 9 10 8¹⁄₄ x 11¹⁄₂ 10 x 15 11¹⁄₈ 10 x 15 12 TOOLS AND ACCESSORIES Heavy Duty muffler body clamp and hanger strap. The strap can be bent and twisted to fit the installation. Use for horizontal or vertical mount. Use two for maximum rigidity. SCHOOL BUS Style A MEDIUM DUTY TRUCK GVW 3-6 Style B Style C HEAVY DUTY TRUCK GVW 7-8 PIPE HANGERS Clamp and hanger strap, made of heavy gauge steel to hold tail pipe and exhaust pipe in a rigid position. Fits Pipe Diameter Part No. Fits Pipe Diameter 35604 35605 35606 35852 2¹⁄₂ 2³⁄₄ 3 3¹⁄₂ 35853 35734 35855 4 5 7 12" APPLICATION BY ENGINE Part No. NOISE AND BACKPRESSURE DATA UNIVERSAL HANGER & BRACKET 35966 Fits 2³⁄₄" - 4¹⁄₂" O.D. TRACTOR 12" 35600 Fits 1¹⁄₂" to 2¹⁄₄" OD 35209 O.E. Type Hanger 35315 35517 ● New Number 35210 Universal Hanger 35209 35209 35315 35517 O.E. Type Hanger 35544 O.E. CROSS INDEX MUFFLER SPECS UNIVERSAL HANGERS 35544 Universal Hanger 35210 47 ACCESSORIES 1800 PIPE SHIELDS AND CLAMP KITS Part No. PIPE SHIELDS Specifications 29039 Aluminized 4"-5" x 48" Pipe Shield w/o Mtng. Clamps, Round Holes 29041 Stainless Steel 4"-5" x 48" Pipe Shield w/o Mtng. Clamps, Round Holes 29045 Stainless Steel 3¹⁄₂"-5" x 48" Pipe Shield w/o Mtng. Clamps w/Horizontal Slots 29047 Stainless Steel 6" x 48" Pipe Shield w/o Mtng. Clamps, Round Holes PIPE SHIELD CLAMP KIT (2 Clamps) Specifications Part No. 35884l Chrome Clamp Kit for 4" Diameter Pipe 35885l Chrome Clamp Kit for 5" Diameter Pipe 35348l Chrome Clamp Kit for 6" Diameter Pipe 35440l Zinc Plated Clamp Kit for 3¹⁄₂" Diameter Pipe 35441l Zinc Plated Clamp Kit for 4" Diameter Pipe 35442l Zinc Plated Clamp Kit for 5" Diameter Pipe 35372l Zinc Plated Clamp Kit for 6" Diameter Pipe l Kit contains two clamps. CHROME GRAB HANDLE Part No. Specifications 29110 18" Length 29219 24" Length Mounting Bolts included. 3600 ALUMINIZED PIPE SHIELD Part No. Fits Diameter 29030l 29031l 3" Pipe 4" Pipe Length of Guard 36" 36" l Clamps (2) included in box No. 35796 UNIVERSAL MOUNTING BRACKET Use for either cab or mast mount. Fits 4"—5" piping. 48 ACCESSORIES GENERAL INFORMATION ALUMINIZED AND STAINLESS STEEL MUFFLER AND PIPE SHIELDS (Cont.) SCHOOL BUS TOOLS AND ACCESSORIES 1800 MUFFLER SHIELDS AND CLAMP KITS 1800 MUFFLER SHIELDS 29052 Aluminized 8"-10" x 51" Muffler Shield w/o Mtng. Clamps, Round Holes 29043 Aluminized 8"-10" x 51" Muffler Shield w/o Mtng. Clamps, Round Holes 29036 Stainless Steel 8"-10" x 42" Muffler Shield w/o Mtng. Clamps, Round Holes 29042 Stainless Steel 8"-10¹⁄₂" x 51" Muffler Shield w/o Mtng. Clamps, Round Holes 29044 Stainless Steel 8"-10" x 51" Muffler Shield w/o Mtng. Clamps, w/Horizontal HEAVY DUTY TRUCK GVW 7-8 Aluminized 8"-10" x 42" Muffler Shield w/o Mtng. Clamps, Round Holes NOISE AND BACKPRESSURE DATA APPLICATION BY ENGINE 29029 MEDIUM DUTY TRUCK GVW 3-6 MUFFLER SHIELDS Specifications Part No. 1800 MUFFLER SHIELD CLAMP KITS Chrome Clamp Kit for 8" Diameter Muffler 35886l Chrome Clamp Kit for 8¹⁄₂" Diameter Muffler 35887l Chrome Clamp Kit for 9" Diameter Muffler 35933l Chrome Clamp Kit for 10" Diameter Muffler 35935l Chrome Clamp Kit for 10⁷⁄₁₆" Diameter Muffler 35790l Zinc Plated Clamp Kit for 9" Diameter Muffler 35791l Zinc Plated Clamp Kit for 10" Diameter Muffler 35792l Zinc Plated Clamp Kit for 10¹⁄₂" Diameter Muffler MUFFLER SPECS 36224l TRACTOR MUFFLER SHIELD CLAMP KITS (2 Clamps) Specifications O.E. CROSS INDEX Part No. l Kit contains two clamps. 49 ACCESSORIES ALUMINIZED AND STAINLESS STEEL MUFFLER AND PIPE SHIELDS 2700 MUFFLER SHIELDS AND CLAMP KITS Part No. MUFFLER SHIELDS Specifications 29050 Aluminized 6"-9" x 50" Muffler Shield w/Mtng. Clamps, Slotted Holes 29048 Aluminized 8¹⁄₂"-10¹⁄₂" x 48" Muffler Shield w/o Mtng. Clamps, Round Holes 29034c Aluminized 9"-10" x 32" Muffler Shield w/o Mtng. Clamps, Round Holes 29046i Stainless Steel 8¹⁄₂"-10¹⁄₂" x 48" Muffler Shield w/o Mtng. Clamps, Round Holes 29051 Stainless Steel 9"-10" x 51" Muffler Shield w/o Mtng. Clamps, Round Holes i c Shield only, requires (2) 35370 clamps and 29110 Grab Handle. Shield only, requires 35216 Clamp Kit for 9" Dia. Muffler & 35370 Clamp Kit for 10" Dia. Muffler. Part No. MUFFLER SHIELD CLAMP KIT (2 Clamps) Specifications 36227 Aluminized Clamp Kit for 9" Muffler 36226 35216 35370 Aluminized Clamp Kit for 10" Muffler Chrome Clamp Kit for 9" Muffler Chrome Clamp Kit for 10" Muffler Part No. 29032 UNIVERSAL MUFFLER SHIELD KIT Specifications Universal Stainless Steel Shield Kit for 8"-10" x 45" Mufflers, includes Grab Handles and Clamps 2700 PIPE SHIELDS AND CLAMP KITS Part No. 29033 Aluminized 4"-5" x 36" Pipe Shield w/o Mtng. Clamps, Round Holes 29055 Aluminized 4" x 48" Pipe Shield w/o Mtng. Clamps, Use (2) 35441 Clamps, Slotted Holes Part No. 50 PIPE SHIELDS Specifications PIPE SHIELD CLAMP KIT (2 Clamps) Specifications 35884 Chrome Plated Clamp Kit for 4" Diameter Pipe 35885 35441 35442 Chrome Plated Clamp Kit for 5" Diameter Pipe Zinc Plated Clamp Kit for 4" Diameter Pipe Zinc Plated Clamp Kit for 5" Diameter Pipe GENERAL INFORMATION ACCESSORIES GENERAL SERVICE MUFFLER SPECIFICATIONS Overall Length I.D. Outlet 22356 22355 21468 21470 21471 2¹⁄₂ 2³⁄₄ 3 3¹⁄₂ 4 6 6 6 7 7 30 29 21 30 27¹⁄₄ 38 37 30 38 36 2¹⁄₂ 2³⁄₄ 3 3¹⁄₂ 4 4 4 4 4 4 4 9 10 10 10 9 9 20 44 44 44 44 44 27 51 51 51 51 51 4 5 4 5 4 4 4 4 5 9 9 9 44 44 33¹⁄₂ 51 51 40 5 5 5 22938 5 5 5 5 5 9 10 10 10 10¹⁄₈ 44 44 44 44 60 51 51 51 51 66¹⁄₂ 5 5 5 5 5 22920 22940 22993n 22811 5 5 5 5 10 9 10 10 44 44 44 44 51 51 51 51 5 5 6 6 22572 n22966 n22969 22962 22936 22965 22941 n22970 22914 n22964 n22963 ■22980 ■c22981 SCHOOL BUS Shell Length MEDIUM DUTY TRUCK GVW 3-6 Shell Diameter HEAVY DUTY TRUCK GVW 7-8 I.D. Inlet APPLICATION BY ENGINE Muffler No. TOOLS AND ACCESSORIES Designed for horizontal or vertical installation. Straight-through flow for minimum backpressure. NOISE AND BACKPRESSURE DATA n MEGA FLOW MUFFLER ■ NOISE BRAKER MUFFLER c DUAL STACK APPLICATION Features Include: ALL ALUMINIZED SHELLS, TUBES AND HEADS TAPERED HEADS - DESIGNED TO SHED MOISTURE WHEN MOUNTED IN THE VERTICAL POSITION MUFFLER SPECS TRACTOR UNIVERSAL TYPE RESONATORS Part No. Inlet Diameter (ID) Outlet Diameter (ID) Shell Diameter Shell Length Overall Length 21146 22538 21467 21464 21835 3 3 7 12 20 3 3 9 11¹⁄₂ 16 3¹⁄₂ 3¹⁄₂ 7 12 20 4 4 7 12 20 5 5 9 12 20 O.E. CROSS INDEX Four popular sizes specially designed for use in combination with gas or diesel heavy duty mufflers. 51 ACCESSORIES SPARK ARRESTORS NOTE: INLET IS SLOTTED END SPARK ARRESTOR APPROVED UNDER USDA FOREST SERVICE STANDARD 5100-1a As indicated by this symbol i embossed on all unit shells. INLET E D C A B Tested and U.S. Forest Service approved for vertical or horizontal installations. All Spark arrestors 95% or greater efficiency on incendiary sparks - reduces fire hazard. Centrifugal force separates solids from exhaust gas. Aluminized construction with stainless steel critical parts. Part No. Body Diameter Inlet and Outlet Diameter Body Length Overall Length 35807 4¹⁄₄ 1¹⁄₂ ID - 1¹⁄₂ OD 3¹⁄₈ 6 21578 5⁵⁄₈ 2 ID - 2 ID 6³⁄₈ 11 21579 5⁵⁄₈ 2¹⁄₂ ID - 2¹⁄₂ ID 8⁵⁄₈ 12⁷⁄₈ 21580 6⁵⁄₈ 3 ID - 3¹⁄₈ OD 10³⁄₁₆ 14⁷⁄₈ 21581 7⁵⁄₈ 3¹⁄₂ ID - 3⁵⁄₈ OD 12 17⁵⁄₈ 21582 8¹⁄₂ 4 ID - 4¹⁄₈ OD 14⁵⁄₈ 21³⁄₁₆ 21584 9⁵⁄₈ 5 ID - 5¹⁄₈ OD 16 24 SELECTING A SPARK ARRESTOR Seven models of different sizes and capacities are currently being produced. Generally, if a spark arrestor will fit on the exhaust pipe of an engine, it will also have acceptable back pressure for that engine. In some cases, a larger size spark arrestor will be required to stay within back pressure limits and in those cases, adapters will have to be used. MUFFLER/SPARK ARRESTOR Outlet Designed for use on Onan Generator on Motor Home Applications. Inlet 21585 52 Muffler No. OD Inlet Shell Diameter Shell Length Overall Length OD Outlet 21585 1¹/₂ 4¹/₄ 18¹/₂ 21 1³/₈
Similar documents
Q1 - Navigators Insurance Company
PROPERTY AND CASUALTY COMPANIES —ASSOCIATION EDITION