Freestanding Lace Haunted House

Freestanding Lace Haunted House
#12480 / 15 Files / 1 Design
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.
Freestanding Lace Haunted House
#12480 / 15 Files / 1 Design
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design
integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
12480-01 Haunted Front Door
Wall Appliqué
12480-02 Haunted Right Wall
Appliqué
12480-03 Haunted Back Wall
Appliqué
12480-04 Haunted Inner Wall
Appliqué
12480-05 Haunted Roof 1
Appliqué
12480-06 Haunted Roof 2
Appliqué
12480-07 Haunted Front Wall
Appliqué
12480-08 Haunted Left Wall
Appliqué
12480-09 Haunted Back Door
Wall Appliqué
12480-10 Haunted Roof 3
Appliqué
12480-11 Haunted Roof 4
Appliqué
12480-12 Haunted Upper Room
Appliqué
2.86 X 6.98 in.
72.64 X 177.29 mm
23,167 St. zR L
6.65 X 4.43 in.
168.91 X 112.52 mm
29,072 St. zR L
4.74 X 4.17 in.
120.40 X 105.92 mm
22,041 St. zR
6.02 X 4.38 in.
152.91 X 111.25 mm
32,102 St. zR L
6.66 X 3.73 in.
169.16 X 94.74 mm
29,147 St. zR L
5.17 X 3.61 in.
131.32 X 91.69 mm
20,911 St. zR L
2.86 X 7.00 in.
72.64 X 177.80 mm
11,512 St. R L
4.76 X 4.37 in.
120.90 X 111.00 mm
28,236 St. zR
5.17 X 3.79 in.
131.32 X 96.27 mm
21,190 St. zR L
6.04 X 4.77 in.
153.42 X 121.16 mm
41,654 St. zR L
4.77 X 5.87 in.
121.16 X 149.10 mm
37,807 St. zR L
6.81 X 3.98 in.
172.97 X 101.09 mm
19,466 St. zR L
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.
Freestanding Lace Haunted House
#12480 / 15 Files / 1 Design
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design
integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
12480-13 Haunted Roof 5
Appliqué
2.44 X 4.85 in.
61.98 X 123.19 mm
21,482 St. zR
12480-14 Haunted Foundation 1
Appliqué
2.16 X 6.15 in.
54.86 X 156.21 mm
9,231 St. R L
12480-15 Haunted Foundation 2
4.53 X 4.53 in.
115.06 X 115.06 mm
12,076 St. R
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.
Freestanding Lace Haunted House
Instructions
Listings below indicate color sample, stitching order and suggested thread color number. “I” refers to Isacord Thread and “T” refers to Timeless. Colors beginning
with 20501 refer to YLI Fine Metallics, 7 refer to Yenmet Metallic, 8 refer to YLI Variations Variegated Thread and 9 refer to Isacord Multicolor Variegated.
I
T
12480-01 Haunted Front Door Wall Appliqué
n
n
n
n
n
n
n
1.Wall Placement Stitch................................... 0020
2.Wall Cut Line & Tackdown............................. 0020
3.Door Placement Stitch.................................. 0020
4.Door Cut Line & Tackdown............................ 0020
5.Windows Placement Stitch............................ 0020
6.Windows Cut Line & Tackdown..................... 0020
7.Lace.............................................................. 0020
12480-02 Haunted Right Wall Appliqué
n
n
n
n
n
n
n
1.Wall Placement Stitch................................... 0020
2.Wall Cut Line & Tackdown............................. 0020
3.Ghost Placement Stitch................................. 0020
4.Ghost Cut Line & Tackdown.......................... 0020
5.Windows Placement Stitch............................ 0020
6.Windows Cut Line & Tackdown..................... 0020
7.Lace.............................................................. 0020
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
12480-03 Haunted Back Wall Appliqué
n
n
n
1.Wall Placement Stitch................................... 0020 28151
2.Wall Cut Line & Tackdown............................. 0020 28151
3.Lace.............................................................. 0020 28151
12480-04 Haunted Inner Wall Appliqué
n
n
n
1.Wall Placement Stitch................................... 0020 28151
2.Wall Cut Line & Tackdown............................. 0020 28151
3.Lace.............................................................. 0020 28151
12480-05 Haunted Roof 1 Appliqué
n
n
n
1.Roof Placement Stitch................................... 0020 28151
2.Roof Cut Line & Tackdown............................ 0020 28151
3.Lace.............................................................. 0020 28151
12480-06 Haunted Roof 2 Appliqué
n
n
n
I
1.Roof Placement Stitch................................... 0020 28151
2.Roof Cut Line & Tackdown............................ 0020 28151
3.Lace.............................................................. 0020 28151
12480-07 Haunted Front Wall Appliqué
n
n
n
n
n
1.Wall Placement Stitch................................... 0020
2.Wall Cut Line & Tackdown............................. 0020
3.Window Placement Stitch............................. 0020
4.Window Cut Line & Tackdown....................... 0020
5.Lace.............................................................. 0020
12480-08 Haunted Left Wall Appliqué
n
n
n
n
n
n
n
1.Wall Placement Stitch................................... 0020
2.Wall Cut Line & Tackdown............................. 0020
3.Door Placement Stitch.................................. 0020
4.Door Cut Line & Tackdown............................ 0020
5.Window Placement Stitch............................. 0020
6.Window Cut Line & Tackdown....................... 0020
7.Lace.............................................................. 0020
12480-09 Haunted Back Door Wall Appliqué
n
n
n
n
n
n
n
T
1.Wall Placement Stitch................................... 0020
2.Wall Cut Line & Tackdown............................. 0020
3.Door Placement Stitch.................................. 0020
4.Door Cut Line & Tackdown............................ 0020
5.Window Placement Stitch............................. 0020
6.Window Cut Line & Tackdown....................... 0020
7.Lace.............................................................. 0020
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
28151
12480-11 Haunted Roof 4 Appliqué
n
n
n
12480-12 Haunted Upper Room Appliqué
n
n
n
n
n
n
n
1.Tall Walls Placement Stitch........................... 0020
2.Tall Walls Cut Line & Tackdown.................... 0020
3.Short Walls Placement Stitch........................ 0020
4.Short Walls Cut Line & Tackdown................. 0020
5.Window Placement Stitch............................. 0020
6.Window Cut Line & Tackdown....................... 0020
7.Lace.............................................................. 0020
12480-13 Haunted Roof 5 Appliqué
n
n
n
n
1.Roof Placement Stitch................................... 0020
2.Long Side Cut Line & Tackdown................... 0020
3.Short Side Cut Line & Tackdown................... 0020
4.Lace.............................................................. 0020
n
n
n
12480-15 Haunted Foundation 2 Appliqué
n
n
n
1.Floor Placement Stitch.................................. 0020 28151
2.Floor Cut Line & Tackdown........................... 0020 28151
3.Lace.............................................................. 0020 28151
1.Roof Placement Stitch................................... 0020 28151
2.Roof Cut Line & Tackdown............................ 0020 28151
3.Lace.............................................................. 0020 28151
2
28151
28151
28151
28151
1.Floor Placement Stitch.................................. 0020 28151
2.Floor Cut Line & Tackdown........................... 0020 28151
3.Lace.............................................................. 0020 28151
Hoop your fabric and backing.
Sew the pattern/placement. PHOTO 1
Place a piece of appliqué fabric over the pattern/placement so that it is completely covered.
Sew the trim stitch/tackdown.
Carefully cut away the excess appliqué fabric.PHOTO 2
Sew the remainder of the design and repeat for any remaining pieces. PHOTO 3
1
28151
28151
28151
28151
28151
28151
28151
12480-14 Haunted Foundation 1 Appliqué
Cut in Place Appliqué Instructions
1.
2.
3.
4.
5.
6.
T
1.Roof Placement Stitch................................... 0020 28151
2.Roof Cut Line & Tackdown............................ 0020 28151
3.Lace.............................................................. 0020 28151
12480-10 Haunted Roof 3 Appliqué
n
n
n
I
3
It is a violation of Copyright law to make and distribute copies of instructions or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.
Freestanding Lace Haunted House
Instructions
GENERAL FREESTANDING LACE GUIDELINES
SUPPLIES:
Embroidery Thread:
HANDY HINTS:
• Use the same embroidery thread in the bobbin as the needle.
Needles:
• Use an Organ 80/12 Titanium needle for extended needle
life.
Stablilizer:
• Use water-soluable stabilizer or film water-soluble stabilizer.
GENERAL INSTRUCTIONS
• DO NOT RINSE away all of the stabilizer for a
“stiffer” lace. Note that the thread may appear a shade
darker if stabilizer is not removed completely.
• If you happen to wash too much out, easily re-stiffen
by diluting some stabilizer scraps in water and dipping
the item in the solution.
Drying Lace:
• Lay lace piece with right side down to dry. This will
minimize the tendancy for the lace to curl.
1.Hoop two layers of water-soluble stabilizer.
2.Attach the hoop to the machine and select the design of
your choice.
3.Stitch the design.
4.Remove the hoop from the machine and the design from the
hoop. Trim excess stabilizer from the design.
5.Rinse away remaining stabilizer and allow it to dry.
Handy tips:
• A pair of tweezers, hemostats, stiletto or a tiny crochet hook can be extremely helpful when inserting the buttonettes
into the eyelets. (Please see Diagram 1 for explanation of buttonette and eyelet and hinge line.)
• Insert the tip of the tweezers, hemostats or crochet hook into the eyelet, grasp the buttonette and pull through the
eyelet.
• A stiletto could be used to “push” the buttonette through the eyelet.
• The lace looks best when left to dry completely. Be sure to flatten the piece out entirely and allow ample time to dry.
• If item becomes too limp to work with, dissolve scrap pieces of water-soluble stabilizer in warm water and apply to the
item to re-stiffen.
• Alternatively you can iron the appliqué pieces on the wrong side while applying spray starch. After ironing, spray again
with starch and allow to dry completely. This will stiffen the lace pieces nicely and aid in construction.
Diagram 1
It is a violation of Copyright law to make and distribute copies of instructions or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.
Freestanding Lace Haunted House
Instructions
Haunted House - Summary
Requires 1 FSL Haunted Front Door Wall Appliqué - 12480-01
Requires 1 FSL Haunted Right Wall Appliqué - 12480-02
Requires 1 FSL Haunted Back Wall Appliqué - 12480-03
Requires 1 FSL Haunted Inner Wall Appliqué - 12480-04
Requires 1 FSL Haunted Roof 1 Appliqué - 12480-05
Requires 1 FSL Haunted Roof 2 Appliqué - 12480-06
Requires 1 FSL Haunted Front Wall Appliqué - 12480-07
Requires 1 FSL Haunted Left Wall Appliqué - 12480-08 Requires 1 FSL Haunted Back Door Wall Appliqué - 12480-09
Requires 1 FSL Haunted Roof 3 Appliqué - 12480-10
Requires 1 FSL Haunted Roof 4 Appliqué - 12480-11
Requires 1 FSL Haunted Upper Room Appliqué - 12480-12
Requires 1 FSL Haunted Roof 5 Appliqué - 12480-13
Requires 1 FSL Haunted Foundation 1 Appliqué - 12480-14
Requires 1 FSL Haunted Foundation 2 Appliqué - 12480-15
Supplies
• Embroidery thread
• Fabric for appliqué (We used: deep purple for the walls,
gold organza for the windows, light charcoal for roof &
light grey for the doors.)
• Embroidery machine
• Stabilizer
• Optional - tweezers, hemostats, stiletto or a tiny crochet hook
Instructions for Haunted House Construction
Note that the base of the building has a hole meant to contain a battery operated tea light candle.
Follow the General Freestanding Lace Guidelines and Cut In Place
Appliqué Instructions and stitch the fifteen pieces required as listed in
the summary above.
Photo 1
Photo 2
Build Upper Room Structure
1. Connect right wall of the Upper Room with the back wall of
the Upper Room. Photo 1
2. Attach Roof 5 to the Upper Room walls – attach long side of
roof to long slant on Upper Room and short side to the short
slant. Photo 2
Set aside built upper room structure
Photo 3
Build Left Roof Structure
3. Connect edge of Roof 3 to Roof 4. Photo 3
Connect Upper Room Structure to Left Roof Structure
4. Connect front of the upper room structure (with window) into the two eyelets on
Roof 3. Photo 4
It is a violation of Copyright law to make and distribute copies of instructions or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.
Photo 4
Freestanding Lace Haunted House
Instructions
5. Connect back of the upper room structure into the two eyelets on Roof 4.
Set aside built upper room & left roof structure
Build Right Room Structure
6. Connect left edge of Front Door Wall to the right edge of the
Inner Wall.
7. Connect right edge of Front Door Wall to the left edge of
Right Wall. Photo 5
8. Connect right edge of Back Wall to left edge of the Inner
Wall.
Set aside built right room structure
Photo 5
Photo 6
Build Right Roof Structure
9. Connect edge of Roof 1 to edge of Roof 2. Photo 6
Set aside built right roof structure
Photo 7
Photo 8
Build Left Room Structure
10. Connect left edge of Front Wall to right edge of Left Wall.
Photo 7
11. Connect left edge of Left Wall to right edge of Back Door
Wall. Photo 8
Attach Left Room Structure to Right Room Structure
12. Connect the right edge of Front Wall into the 3 holes
going down the right side interior of the Inner Wall.
Photo 9
13. Connect the left edge of the Back Door Wall into the 3
holes going down the left side interior of the Inner Wall.
Photo 10
Photo 9
Photo 10
Close Up Back Side of Right Room Structure
14. Connect right edge of Right Wall to left edge of Back
Wall.
Photo 11
Attach Right Roof Structure to Right Room Structure
15. Connect top buttonette on left side of Front Door Wall into eyelet at top right
interior of Roof 2.
16. Connect top buttonette on right side of Back Wall into eyelet at top left interior of
Roof 2.
17. Connect top edge of Inner Wall into eyelets at the bottom of Roof 2. Photo 11
18. Connect remaining buttonette on left side of Front Door Wall into eyelet on Roof 2.
19. Connect remaining buttonette on right side of Back Wall into eyelet on Roof 2.
It is a violation of Copyright law to make and distribute copies of instructions or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.
Freestanding Lace Haunted House
Instructions
Attach Left Roof Structure to Left Room Structure
20. Connect buttonette on top right of Front Wall into bottom
right eyelet on Roof 3. Photo 12
21. Connect buttonette on top left of Back Door Wall into
bottom left eyelet on Roof 4. Photo 13
22. Connect buttonettes on top right of Left Wall into eyelets
on Roof 3. Photo 14
23. Connect buttonettes on top left of Left Wall into eyelets on
Roof 4. Photo 15
24. Connect buttonette on top left of Front Wall into eyelet on
Roof 3.
25. Connect buttonette on top right of Back Door Wall into
eyelet on Roof 4.
Photo 12
Photo 13
Photo 14
Photo 15
Attach Left Roof Structure to Right Roof Structure
26. Connect buttonette on right edge of Roof 3 into eyelet on
Roof 2. Photo 16
27. Connect buttonette on left edge or Roof 4 into eyelet on
Roof 2.
Attach Roof 1 to Right Roof Structure
28. Connect buttonette on top right of Front Door Wall into top left eyelet of
Roof 1.
29. Connect buttonette on top left of Back Wall into top right eyelet of Roof 1.
30. Connect buttonettes on top edge of Right Wall into eyelets on the bottom of
Roof 1.
31. Connect remaining buttonette on right edge of Front Door Wall into eyelet on
Roof 1.
32. Connect remaining buttonette on left edge of Back Wall into eyelet on Roof 1.
Photo 16
Inserting Foundations
33. Appliqué side facing up – connect buttonettes on
Foundation 1 into eyelets of the right room structure
except for the connection to the Inner Wall. Photo 17
34. Appliqué side facing up and tea light hole towards the
center of the house – connect buttonettes of Foundation
2 into eyelets of the left room structure except for the
connection to the Inner Wall. Photo 18
35. Connect remaining buttonette on Foundation 1 into the
eyelet that is aligned on the Inner Wall.
36. Connect remaining buttonette on Foundation 2 into the
eyelet that is aligned on the Inner Wall.
Photo 17
Photo 18
It is a violation of Copyright law to make and distribute copies of instructions or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.