MODx Family Brochure

MOD X
™
www.litecontrol.com
MOD X
™
Litecontrol developed the original architectural slots more
than 3 decades ago. MOD™ delivered a cost-sensitive,
full-family solution to ambient lighting.
MOD™x represents a modernization of this timeless
form based on the original MOD™ value proposition: An
affordably priced, full featured offering with best-in-class
attention to detail.
Key Features
Variable
Intensity
Technology
2
3"
1
4"
MacAdam
Ellipse
Color
Variation
6"
2
VI TECHNOLOGY
Why Use VI® Technology?
VI® Technology provides verifiable wattage for compliance with programs, agencies, state and local codes.
1. Specify light output required to achieve desired illuminance
Driven by application need, not limited fixture options
2. Specify fixture wattage to meet power density requirements
Fixture labeled to your specification means no lost watts in your energy calculation
Standard Uplight Distribution
Low Peak Angle Uplight Distribution
STD INDIRECT OUTPUT RANGE
Lumen Output Efficacy
Max:
1200 lm/ft
117
Min:
300 lm/ft
128
LPA INDIRECT OUTPUT RANGE
Lumen Output Efficacy
Max:
1200 lm/ft
107
Min:
300 lm/ft
118
3. Specify a particular indirect/direct distribution for desired visual comfort*
Uplight and downlight are independently programmed for maximum fixture flexibility
*For I/D fixtures only
DIRECT OUTPUT RANGE
Lumen Output Efficacy
Max:
1100 lm/ft
94
Min:
300 lm/ft
102
Variable
Intensity
Technology
Litecontrol's VI® technology module allows specification of LED light output to meet precise needs.
Commercial Compliance Using COMcheck™
STEP 1: Choose
STEP 2: Specify
Choose lumen output
based on:
•Power density
•Light levels
•Ceiling brightness
3
LITECONTROL
SPECIFIER
STEP 3: Manufacturer
Specify based on the
published output range:
•In 50 lumen increments per
foot (ex: 500, 550, 600)
STEP 4: Verification
Litecontrol designs and
manufactures luminaire
to specifications.
Product arrives on
site with clear, precise
labeling, allowing wattage
calculations based on
actual versus highest
possible values.
4
Design Benefits
Diffuser Consistency
Light leaks are typical in slot products, as diffusers are often cut short to allow for thermal expansion over time. Litecontrol has eliminated
these architecturally unacceptable gaps through an innovative end cap design which provides for diffuser expansion while at the same time
eliminating light leaks.
Typical Competitor
Litecontrol Pendant
Litecontrol Recessed
Competitive products cut the diffuser
short, which results in source visibility.
Die-cast end caps overlap diffuser and
apply outward pressure on the extruded
side rails to eliminate light leaks.
Recessed end caps slide vertically into
place to eliminate risk of diffuser breakage
during installation and removal.
Lines of light are architecturally desirable;
however, they are very unforgiving.
Litecontrol's quality components
and clever design deliver exceptional
uniformity along the slot length.
End Cap Attachment
Attention to Detail
Litecontrol's installer-friendly magnetic
end caps are attached after the diffusers
are installed.
Precise wiring and white, low profile
connectors eliminate shadowing.
5
6
Design Benefits
LED Board Design
Slot products typically use LED boards designed for recessed
troffers, which result in board lengths of less than 24".
Litecontrol boards were designed for slot products and
result in precise 12" increments.
Installation Quality
Typical
Litecontrol
MOD™x ensures a quality installation through numerous features included to assure ease of contractor assembly.
X-Bracket Design
Joining
Captive Reflectors
MOD™ x's X-bracket design assists installers
by providing reliable fixture alignment.
Extruded screw channels ensure
tight seams.
Captive reflector assemblies allow safe
access to internal components.
3" Increments
Breakable-board technology allows specification of recessed
products to 3" increments for recessed MOD luminaires.
7
8
Additional Options
Ordering Guide
Fixture Apertures
3", 4", 6"
Fixture Lengths
2', 3', 4', 5', 6', 8'
Recessed available in 3" increments
Mounting Options
Pendant, recessed, surface or wall
mount options
Dust Cover
Clear. Magnetic attachment
Corners
90 degree pendant, recessed
inside and outside. Lit. 12" length
Dimming Options
10%, 1%, Lutron, DALI
Emergency
Emergency lota CP-Series; the MOD™x
family is also compatible with
Dual-Lite inverters
Sensors
Daylight and occupancy
Downlight Diffuser (SOF)
9
Regressed Diffuser (RGL)
Baffle (BWO)
10
Performance
Color Rendition
VI® Technology Standard (STD) Indirect Light Distribution
Color Characteristics
The scenarios below demonstrate how MOD™x can be specified to achieve comparable performance in different applications.
MOD™x delivers architecturally appropriate color performance as measured by the latest industry-accepted metrics.
9' Ceiling Height
Ceiling Height
9'
Fixture AFF:
7.5'
Distance to Ceiling Plane
1.5'
Lumen Output Indirect
Lumen Output Direct
300 lm/ft
MAX
MIN
MAX/MIN
38
61
14
4.4
Ceiling
I030
D050
Energy usage: exceeds goal by 14%
12'
Workplane (40'x25')
AVG
500 lm/ft
AVG
MAX
MIN
MAX/MIN
24
58
6
9.6
LPD
.432
Fixture Layout: (3) 20' Rows
12'
14
21
29
31
25
21
21
25
32
32
26
21
21
25
31
30
21
14
18
28
41
43
33
25
26
33
44
45
33
26
26
33
43
42
28
18
21
34
50
51
39
30
30
39
53
53
39
30
30
39
51
50
34
21
23
37
54
56
42
32
33
43
58
58
43
33
33
42
56
54
37
23
24
38
56
58
44
34
34
45
60
60
45
34
34
44
58
56
38
24
24
39
57
59
45
35
35
45
61
61
45
35
35
45
59
57
39
24
24
39
57
58
45
35
35
45
61
61
45
35
35
45
58
57
39
24
23
38
55
57
43
33
34
44
59
59
44
34
34
44
57
56
38
23
22
36
53
54
41
31
32
42
56
56
42
32
32
41
54
53
36
22
20
32
47
48
36
28
28
37
50
50
37
28
28
36
48
47
32
20
16
25
36
38
29
24
24
30
39
39
30
24
24
30
38
36
26
16
Fixture Utilized: 4L-P-ID-STD-4-SOF-X-CX-35K-I030-D050
Color Data
Spectral Power Distribution
Fidelity
SPECTRAL POWER DISTRIBUTION COMPARISON
CCT
30K
35K
40K
Rf
83
82
82
Rg
96
96
96
CCT (K) 3009
3494
3975
Duv -0.0009 -0.0004 -0.0003
x
0.435 0.4052 0.3814
y
0.4012 0.3898 0.3768
CIE Ra
83
83
84
30K
30K
35K
40K
100%
80%
Rf-Rg Plot
140
Approx. limits for sources on
2
1
1 the Planckian locus.
Approx. limits for practical
2
light sources.
130
60%
40%
120
20%
0%
380
430
480
530
580
630
Wavelength (nm)
680
730
780
110
Gamut Index, Rg
Room Size: 40'x25'
Relative Power
Lighting Goals: Workplane: 2.5' FC: 35 Max LPD: .50 100
90
35K
40K
80
70
18' Ceiling Height
30K
35K
40K
Fixture Layout: (3) 20' Rows
60
Ceiling Height
18'
Fixture AFF:
7.5'
Distance to Ceiling Plane
16.5'
Lumen Output Indirect
I055
Lumen Output Direct
D050
Energy usage: exceeds goal by 6%
Workplane (40'x25')
550 lm/ft
AVG
MAX
MIN
MAX/MIN
38
57
16
3.6
Ceiling
500 lm/ft
AVG
MAX
MIN
MAX/MIN
26
33
16
2.1
LPD
.470
50
12'
12'
16
22
30
31
26
22
22
27
33
33
27
22
22
26
31
30
22
16
19
29
41
42
32
26
27
33
44
44
33
27
26
32
42
40
29
19
22
33
48
49
37
30
30
38
51
51
38
30
30
37
49
48
33
22
23
36
51
53
40
32
32
41
55
55
41
32
32
40
53
51
36
23
24
37
53
55
42
33
34
43
57
57
43
34
33
42
54
53
37
24
25
38
54
55
42
34
34
43
57
57
43
34
34
42
55
54
38
25
25
37
53
55
42
34
34
43
57
57
43
34
34
42
55
53
37
25
24
37
52
54
41
33
33
42
56
56
42
33
33
41
54
52
37
24
23
35
50
51
39
31
31
40
54
54
40
31
31
39
51
50
35
23
21
31
45
46
35
28
29
36
48
48
36
29
28
35
46
45
31
21
18
26
36
37
29
24
25
30
39
39
30
25
24
29
37
36
26
18
60
70
80
90
100
Fidelity Index, Rf
Fixture Utilized: 4L-P-ID-STD-4-SOF-X-CX-35K-I055-D050
Color Rendering
Eliminate A Row Ceiling Height
Workplane (40'x25')
9'
Fixture AFF:
7.5'
Distance to Ceiling Plane
1.5'
Lumen Output Indirect
I075
Lumen Output Direct
D050
Energy usage: exceeds goal by 10%
750 lm/ft
AVG
MAX
MIN
MAX/MIN
36
72
14
5.5
500 lm/ft
Ceiling
AVG
MAX
MIN
MAX/MIN
34
86
9
9.5
LPD
.454
11
Fixture Layout: (2) 20' Rows
16'
13
18
26
34
38
31
23
18
16
16
18
22
29
37
36
28
20
15
16
22
33
47
52
41
29
22
18
18
21
27
38
50
50
36
25
17
18
26
39
56
62
48
34
25
21
20
23
31
44
60
60
43
29
20
19
28
42
61
68
53
37
27
22
22
25
34
48
65
65
47
31
21
20
30
44
63
70
55
39
28
23
23
27
35
51
68
67
49
33
23
21
30
45
65
72
56
39
29
24
23
27
36
51
69
68
50
33
23
21
30
45
64
71
56
39
29
24
23
27
36
51
69
68
50
33
23
20
29
44
62
69
54
38
28
23
23
26
35
50
67
66
48
32
22
19
27
41
59
66
51
36
26
22
21
25
33
47
63
63
46
30
21
17
24
37
52
58
46
32
24
20
19
22
29
42
56
56
40
27
19
15
21
30
42
46
37
27
20
17
17
19
25
34
44
44
33
23
16
Fixture Utilized: 4L-P-ID-LPA-4-SOF-X-CX-35K-I075-D050
CCT CRI
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R14
30K
83
81
91
97
81
82
89
84
62
13
79
79
69
84
99
35K
83
81
89
95
81
81
85
86
65
13
73
79
62
83
97
40K
84
82
90
94
82
82
85
87
68
17
74
80
60
84
97
Rated Life
•L70: 280,000 (calculated per TM-21 extrapolated curve)
•L70: >61,000 (reported per TM-21/LM80 6x's limitation)
Warranty
•L90: 72,000 (calculated per TM-21 extrapolated curve)
•L90: >61,000 (reported per TM-21/LM80 6x's limitation)
•5 years
12
Ordering Information
PENDANT, SURFACE, WALL
Feature
Series
Mounting
Fixture Distribution
Uplight Distribution
Row Length (in feet)
Max Length (in row)
Downlight Diffuser
Finish/Color
Color Temperature
Indirect Output/ft
Direct Output/ft
RECESSED
Options
3L
4L
6L
P
S
W
D
ID
STD
LPA
02
03
04
05
06
08
SOF
RGL
BWO
C1 (Matte White)
C2 (Textured Matte White)
C3 (Light Silver)
C4 (Machined Aluminum
C5 (Carbon Black)
C6 (Textured Camera Black)
CC (Custom)
30K
35K
40K
I030 (min)
I120 (max)
D030 (min)
D110 (max)
Feature
Series
Options
3L
4L
6L
R
D
Mounting
Fixture Distribution
Row Length (in feet)
Row Length Adder (in inches) /3
/6
/9
Max Length (in row)
02
03
04
05
06
08
Downlight Diffuser
SOF
RGL
BWO
Finish/Color
C1 (Matte White)
Color Temperature
30K
35K
40K
Direct Output/ft
D030 (min)
D110 (max)
NOTE: Additional options available. Review specification sheets for more details.
13
14
701 Millennium Blvd.
Greenville, SC 29607
hubbelllighting.com
ALERA LIGHTING
ARCHITECTURAL AREA LIGHTING
BEACON PRODUCTS
COLUMBIA LIGHTING
COMPASS
DUAL-LITE
HUBBELL CONTROL SOLUTIONS
HUBBELL INDUSTRIAL LIGHTING
HUBBELL OUTDOOR LIGHTING
KIM LIGHTING
KURT VERSEN
LITECONTROL
PRECISION-PARAGON [P2]
PRESCOLITE
PROGRESS LIGHTING
SPAULDING LIGHTING
SPORTSLITER SOLUTIONS
STERNER LIGHTING
WHITEWAY
LC-HLI1090 Rev 06/16