professional water systems equipment

Transcription

www.franklin-electric.com
TABLE OF CONTENTS
Model Number Nomenclature...........................................2
Submersible Pumps:
4" Standard Capacity Pumps
Features & Ordering Information................................4
5 gpm.............................................................................8
7 gpm...........................................................................10
10 gpm.........................................................................12
15 gpm.........................................................................14
20 gpm.........................................................................18
Dimensions...................................................................22
4" High Capacity Pumps
Features & Ordering Information..............................24
30 gpm.........................................................................26
50 gpm.........................................................................28
85 gpm.........................................................................32
Features & Ordering Information..............................34
50 gpm.........................................................................36
75 gpm.........................................................................38
100 gpm.......................................................................40
125 gpm.......................................................................42
4" E-Series Environmental Pumps
Features.......................................................................44
Thermoplastic Ordering Information........................45
10 gpm.........................................................................46
20 gpm.........................................................................48
Stainless Steel Ordering Information.........................50
35 gpm.........................................................................52
45 gpm.........................................................................54
60 gpm.........................................................................56
90 gpm.........................................................................58
Submersible Pump Accessories....................................60
Horizontal Booster Pumps
WHB Series....................................................................73
Vertical Booster Pumps
V6 Series.......................................................................82
Motors, Drives and Controls:
Submersible Motors
4" Submersible Motors................................................86
6" Submersible Motors................................................97
Controls
Control Boxes............................................................107
Protection
Pumptec Family........................................................109
Three-Phase Panel....................................................111
SubMonitor.................................................................113
Accessories................................................................114
Drives
SubDrive / MonoDrive..............................................115
References:
Friction Loss....................................................................117
Pipe Fittings....................................................................120
Pressure Loss..................................................................121
Pressure Tank Sizing.......................................................123
Reference Tables..........................................................124
Conversions...................................................................125
Warranty Information:
Lost or Damaged Goods.............................................126
Limited Warranty...........................................................127
Non-Submersible Pumps:
Shallow Well Jet Pumps
WJS Series.....................................................................61
Convertible Jet Pumps
WJC Series...................................................................64
Jet Pump Accessories....................................................66
AQ80............................................................................67
Air Charger Kit.............................................................68
Self-Priming Sprinkler Pumps
WSP Series....................................................................69
End Suction Centrifugal Pumps
WCE Series...................................................................71
For the most up-to-date product information, visit water.franklin-electric.com
MODEL NUMBER NOMENCLATURE
Submersible Series Codes:
WA = Water Horse 4" Pump
WE = Water Horse Environmental
WH = Water Horse Brand
Non-Submersible Series Codes:
WJS = Shallow Well Jet
WJC = Convertible Well
WSP = Self-Priming Sprinkler Pump
WCE = End Suction Centrifugal
WHB = Horizontal Booster
WVB = Vertical Booster
Horsepower Codes:
hp
Code
1/3
1/2
3/4
11.5
2357 .5
10
15
20
0305071 152 3 5 7 101520
hp
Code
25303540506075100
125
150
175
200
25303540506075100
125
150
175
200
Material Codes:
CI = Cast Iron
P = Plastic
S = Stainless Steel
2
MODEL NUMBER NOMENCLATURE
4" 5-20 gpm Submersible Pump/Motors:
Pump info
Motor info
35 WA 15 S 4 - 3W 230
Voltage, 115, 230, 460, etc.
3W, 2W, or 3P
Pump size
P = Plastic, S = Stainless
Horsepower
Series
Gallons or Liters per Minute
Examples:
45WA1S4-2W230 = 45 gpm, Water Horse, Stainless Steel / 1 hp, 230V, 2-wire motor
35WA15SA-3W230 = 35 gpm, Water Horse, Stainless Steel / 1.5 hp, 230V, 3-wire motor
Pump End:
Pump info
90 WA 5 S 4 - PE
PE = Pump End,
PEX = 50 Hz Pump End,
PEXB = 50 Hz BSPP
Pump size
P = Plastic, S = Stainless
Horsepower
Series
Gallons or Liters per Minute
Examples:
85WA3S4-PE = 45 gpm, Water Horse High Capacity, 3 hp, Stainless Steel, Pump End
25WE1P4-PEXB = 25 gpm, Water Horse E-Series, 1 hp, Plastic, 50 Hz Pump End BSPP Threads
Jet Pumps:
W JC 05 CI
Material
Horsepower
Series
Brand
Examples:
WJC07CI = Water Horse, Convertible Jet, 3/4 hp, Cast Iron
WJS1CI - H = Water Horse, Shallow Well Jet, 1 hp, Cast Iron, High Head
3
SUBMERSIBLE PUMPS
5, 7, 10, 15, and 20 gpm Models
Features:
■■ 5 performance ranges - 5, 7, 10, 15 and 20 gpm.
■■ Available with thermoplastic or stainless steel discharge and
motor bracket.
■■ Celcon® disk allows for close tolerances for increased performance.
■■ Thermoplastic impellers and stages for maximum efficiency.
■■ Stainless steel upthrust washer prevents excessive wear in
severe applications.
■■ Built-in removable valve keeps water in your system at all times.
■■ Stainless steel shaft features high quality, premium materials at
a competitive price.
■■ Sintered stainless steel top bearing to provide years of
trouble-free service.
■■ Maximum water temperature with proper flow is 120 °F (49 °C),
consult factory for further details.
■■ Removable suction screen prevents debris from clogging impellers
and provides full flow performance.
■■ Hex rubber-top bearing has an extra large surface area to
assure shaft stability and multiple flow channels to keep small particulates away from bearing surfaces.
■■ Powered by Franklin corrosion-resistant submersible motors.
Celcon® is a registered trademark of the Celanese Corporation.
NRTL/C
CSA 108
UL 778
4
SUBMERSIBLE PUMPS
5-20 gpm Thermoplastic Units Ordering Information (See pgs. 2-3 for model number explanation)
1/2 - 1.5 HP Single-Phase Units
GPM
5
7
10
15
20
2-Wire
3-Wire
HP
Stages
Volts
Model No.
Order No.
Model No.
Order No.
1/2
13
115
5WA05P4-2W115
94320505
5WA05P4-3W115
94320525
1/2
13
230
5WA05P4-2W230
94320510
5WA05P4-3W230
94320530
3/4
18
230
5WA07P4-2W230
94320515
5WA07P4-3W230
94320535
1
21
230
5WA1P4-2W230
94320520
5WA1P4-3W230
94320540
1/2
9
115
7WA05P4-2W115
94320705
7WA05P4-3W115
94320730
1/2
9
230
7WA05P4-2W230
94320710
7WA05P4-3W230
94320735
3/4
12
230
7WA07P4-2W230
94320715
7WA07P4-3W230
94320740v
1
15
230
7WA1P4-2W230
94320720
7WA1P4-3W230
94320745
1.5
21
230
7WA15P4-2W230
94320725
7WA15P4-3W230
94320750
1/2
7
115
10WA05P4-2W115
94321005
10WA05P4-3W115
94321030
1/2
7
230
10WA05P4-2W230
94321010
10WA05P4-3W230
94321035
3/4
9
230
10WA07P4-2W230
94321015
10WA07P4-3W230
94321040
1
12
230
10WA1P4-2W230
94321020
10WA1P4-3W230
94321045
1.5
17
230
10WA15P4-2W230
94321025
10WA15P4-3W230
94321050
3/4
8
230
15WA07P4-2W230
94321505
15WA07P4-3W230
94320720
1
10
230
15WA1P4-2W230
94321510
15WA1P4-3W230
94320725
1.5
14
230
15WA15P4-2W230
94321515
15WA15P4-3W230
94320730
3/4
5
230
20WA07P4-2W230
94322005
20WA07P4-3W230
94322020
1
7
230
20WA1P4-2W230
94322010
20WA1P4-3W230
94322025
1.5
9
230
20WA15P4-2W230
94322015
20WA15P4-3W230
94322030
Notes: All listed above have 1-1/4" NPT discharge and feature our removable
Flomatic™
poppet assembly.
5
SUBMERSIBLE PUMPS
5-20 gpm Stainless Steel Units Ordering Information (See pgs. 2-3 for model number explanation)
GPM
5
7
10
15
20
2-Wire
3-Wire
HP
Stages
Volts
Model No.
Order No.
Model No.
Order No.
1/2
13
115
5WA05S4-2W115
94350505
5WA05S4-3W115
94350525
1/2
13
230
5WA05S4-2W230
94350510
5WA05S4-3W230
94350530
3/4
18
230
5WA07S4-2W230
94350515
5WA07S4-3W230
94350535
1
21
230
5WA1S4-2W230
94350520
5WA1S4-3W230
94350540
1/2
9
115
7WA05S4-2W115
94350705
7WA05S4-3W115
94350730
1/2
9
230
7WA05S4-2W230
94350710
7WA05S4-3W230
94350735
3/4
12
230
7WA07S4-2W230
94350715
7WA07S4-3W230
94350740
1
15
230
7WA1S4-2W230
94350720
7WA1S4-3W230
94350745
1.5
21
230
7WA15S4-2W230
94350725
7WA15S4-3W230
94350750
1/2
7
115
10WA05S4-2W115
94351005
10WA05S4-3W115
94351030
1/2
7
230
10WA05S4-2W230
94351010
10WA05S4-3W230
94351035
3/4
9
230
10WA07S4-2W230
94351015
10WA07S4-3W230
94351040
1
12
230
10WA1S4-2W230
94351020
10WA1S4-3W230
94351045
1.5
17
230
10WA15S4-2W230
94351025
10WA15S4-3W230
94351050
3/4
8
230
15WA07S4-2W230
94351505
15WA07S4-3W230
94351520
1
10
230
15WA1S4-2W230
94351510
15WA1S4-3W230
94351525
1.5
14
230
15WA15S4-2W230
94351515
15WA15S4-3W230
94351530
3/4
5
230
20WA07S4-2W230
94352005
20WA07S4-3W230
94352020
1
7
230
20WA1S4-2W230
94352010
20WA1S4-3W230
94352025
1.5
9
230
20WA15S4-2W230
94352015
20WA15S4-3W230
94352030
Notes: All listed above have 1-1/4" NPT discharge and feature our removable
6
Flomatic™
poppet assembly.
SUBMERSIBLE PUMPS
5-20 gpm Pump Ends Only Ordering Information (See pgs. 2-3 for model number explanation)
Stainless Steel 1/2 - 5 HP Pump Ends
Thermoplastic 1/2 - 1.5 HP Pump Ends
GPM
5
HP
Stages Model No. Order No.
1/2
13
5WA05P4-PE
94330505
3/4
18
5WA07P4-PE
94330510
1
21
5WA1P4-PE
94330515
1/2
9
7WA05P4-PE
94330705
3/4
12
7WA07P4-PE
94330710
1
15
7WA1P4-PE
94330715
1.5
21
7WA15P4-PE
94330720
1/2
7
10WA05P4-PE
94331005
3/4
9
10WA07P4-PE
94331010
1
12
10WA1P4-PE
94331015
1.5
17
10WA15P4-PE
94331020
GPM
5
7
7
10
10
15
20
3/4
8
15WA07P4-PE
94331505
1
10
15WA1P4-PE
94331510
1.5
14
15WA15P4-PE
94331515
3/4
5
20WA07P4-PE
94332005
1
7
20WA1P4-PE
94332010
1.5
9
20WA15P4-PE
94332015
15
20
HP
Stages Model No. Order No.
1/2
13
5WA05S4-PE
94360505
3/4
18
5WA07S4-PE
94360510
1
21
5WA1S4-PE
94360515
1.5
28
5WA15S4-PE
94360520
1/2
9
7WA05S4-PE
94360705
3/4
12
7WA07S4-PE
94360710
1
15
7WA1S4-PE
94360715
1.5
21
7WA15S4-PE
94360720
2
24
7WA2S4-PE
94360725
1/2
7
10WA05S4-PE
94361005
3/4
9
10WA07S4-PE
94361010
1
12
10WA1S4-PE
94361015
1.5
17
10WA15S4-PE
94361020
2
19
10WA2S4-PE
94361025
3
26
10WA3S4-PE
94361030
3/4
8
15WA07S4-PE
94361505
1
10
15WA1S4-PE
94361510
1.5
14
15WA15S4-PE
94361515
2
18
10WA2S4-PE
94361520
3
24
10WA3S4-PE
94361525
3/4
5
20WA07S4-PE
94362005
1
7
20WA1S4-PE
94362010
1.5
9
20WA15S4-PE
94362015
2
11
20WA2S4-PE
94362020
3
15
20WA3S4-PE
94362025
5
25
20WA5S4-PE
94362030
7
SUBMERSIBLE PUMPS
PUMP OPERATING RANGE
FEET
METERS
5 gpm Performance Curves
260
240
220
BEST EFFICIENCY RANGE
1.5 HP
800
700
200
180
1 HP
600
3/4 HP
160
500
140
120
400
1/2 HP
100
300
60
20 FT
80
200
0.2 GPM
40
100
20
0
0
0
0.0
8
1
0.2
2
0.4
3
0.6
4
0.8
5
1.0
1.2
6
1.4
7
1.6
8
GPM
1.8
M3PH
SUBMERSIBLE PUMPS
5 gpm Performance Charts
Capacities in U.S. Gallons per Minute
Depth to Pumping Water Level, or Lift, in Feet
Shaded Areas Indicate Most Efficient Performance
PSI
80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800
20
30
1/2
40
7.5
50
7.2
6.9
7.3
7.0
6.6
5.6
4.4
6.5
6.1
5.7
4.4
2.9
1.7
7.5
7.2
6.8
6.5
6.0
5.6
5.1
3.8
7.1
6.8
6.4
6.0
5.5
5.0
4.5
3.0
1.9
7.4
7.1
6.7
6.3
5.9
5.4
5.0
4.5
3.9
60
7.4
7.0
6.7
6.3
5.8
5.4
4.9
4.4
3.8
3.2
80
6.5
6.1
5.7
5.2
4.7
4.2
3.7
3.0
2.0
Shut-off PSI
160
152
143
134
126
117
108
100
91
0
20
7.4
30
3/4
40
7.4
50
60
7.5
7.3
7.2
2.7
Shut-off 390 ft
60
82
61
39
17
7.5
6.9
6.3
5.4
4.4
3.6
7.0
6.3
5.4
4.5
3.7
2.6
1.8
7.4
7.2
6.9
6.7
5.9
5.0
4.1
3.2
7.1
6.9
6.7
6.4
5.5
4.6
3.7
2.7
2.0
7.3
7.1
6.9
6.6
6.3
6.0
5.1
4.2
3.3
7.1
6.8
6.6
6.3
6.0
5.6
4.6
3.8
2.8
1.0
2.5
Shut-off 540 ft
40
80
7.5
7.2
7.0
6.8
6.5
6.2
5.8
5.5
5.1
4.7
3.8
2.9
Shut-off PSI
225
217
208
199
191
182
173
165
156
147
126
104
82
61
39
17
7.3
6.9
6.3
5.6
4.7
4.0
3.2
6.9
6.4
5.6
4.8
4.0
3.2
2.0
1.1
0
20
7.4
30
1
40
50
7.5
60
80
Shut-off PSI
262
253
7.3
7.3
7.2
6.7
6.0
5.2
4.4
3.7
2.8
7.3
7.1
7.0
6.4
5.7
4.9
4.1
3.3
2.2
7.1
6.9
6.7
6.1
5.3
4.5
3.7
2.9
1.3
2.3
7.5
7.3
7.1
6.9
6.7
6.5
5.7
4.9
4.1
3.4
7.4
7.2
7.0
6.8
6.6
6.4
6.1
5.8
5.0
4.2
3.4
2.4
245
236
227
219
210
201
193
184
162
141
119
97
76
54
32
11
7.5
7.0
6.6
6.1
5.5
5.0
0
1.5
1.9
Shut-off 625 ft
20
0
4.5
3.8
3.1
20
7.5
7.1
6.6
6.1
5.6
5.1
4.5
3.9
3.1
2.2
30
7.3
6.9
6.4
5.9
5.3
4.8
4.2
3.6
2.7
1.6
40
7.1
6.6
6.1
5.6
5.1
4.5
3.9
3.2
2.2
50
7.4
6.9
6.4
5.9
5.4
4.8
4.3
3.6
2.8
1.7
60
7.2
6.7
6.2
5.7
5.1
4.6
4.0
3.3
2.3
1.1
80
Shut-off PSI
359
351
342
333
325
316
307
299
7.4
7.2
6.7
6.2
5.7
5.2
4.6
4.0
3.3
2.4
1.2
290
281
260
238
217
195
173
152
130
108
87
65
43
2.1
Shut-off 850 ft
HP
22
Notes: 1. Performance shown does not include friction loss in the drop pipe.
2. All performance data is based on rated motor nameplate voltage.
9
SUBMERSIBLE PUMPS
220
200
180
FEET
METERS
2 HP
700
650
1.5 HP
600
550
160
500
140
450
120
400
1 HP
3/4 HP
350
100
300
60
40
1/2 HP
10 FT
80
250
0.2 GPM
200
150
100
20
0
50
0
0
0.0
10
1
2
0.5
3
4
5
1.0
6
7
1.5
8
9
2.0
10
11
12 GPM
2.5
M3PH
SUBMERSIBLE PUMPS
20
9.7
30
1/2
40
9.4
50
60
6.4
4.0
3.5
7.3
5.9
5.7
2.9
87
78
69
6.7
5.0
95
4.4
7.6
6.2
7.1
104
4.8
7.4
8.2
7.8
8.0
6.6
8.5
9.2
113
9.0
7.7
9.5
8.1
80
10.0
8.4
9.0
Shut-off PSI
8.7
61
52
43
35
9.8
9.1
0
20
30
3/4
40
50
60
80
Shut-off PSI
153
4.3
Shut-off 280 ft
60
13
9.0
6.9
7.1
3.4
9.7
9.0
8.3
5.8
9.6
8.9
8.2
7.3
3.8
9.5
8.8
8.0
7.2
6.0
9.4
8.7
7.9
7.0
5.8
4.2
84
75
9.9
9.2
8.5
7.7
6.7
5.4
3.6
145
136
127
119
110
101
93
54
0
20
9.3
30
1
60
80
Shut-off PSI
186
178
169
160
32
10
9.2
7.9
8.0
6.3
10.0
8.7
7.4
4.8
9.9
9.4
8.1
6.5
2.4
9.9
9.3
8.8
7.5
5.1
2.9
40
50
3.0
Shut-off 374 ft
40
0
9.8
9.2
8.7
8.2
6.7
9.6
9.0
8.5
8.0
7.5
6.8
3.4
152
143
134
126
117
108
87
65
43
22
9.6
8.4
7.2
5.7
9.7
8.5
7.3
5.8
3.3
0
20
9.2
8.0
6.7
4.8
40
9.8
8.6
7.4
5.9
3.5
50
9.2
8.1
6.8
5.0
3.8
30
1.5
6.1
Shut-off 450 ft
20
80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750
9.9
8.7
7.5
6.1
10.0
8.8
7.6
6.2
4.0
180
158
136
115
93
60
80
Shut-off PSI
258
249
240
232
223
214
206
197
188
0
2.0
3.0
Shut-off 615 ft
PSI
71
50
28
6
30
9
9.8
8.9
8.1
7.2
5.8
3.0
3.3
20
9.9
9.0
8.1
7.3
5.9
30
9.5
8.6
7.8
6.8
4.9
3.6
40
10.0
9.0
8.2
7.4
6.1
50
9.5
8.6
7.8
6.9
5.1
3.8
60
10.0
9.1
8.3
7.4
6.2
80
9.2
8.3
7.5
6.3
4.1
182
160
139
117
95
Shut-off PSI
303
294
286
277
268
260
251
242
234
225
204
74
52
30
Shut-off 720 ft
HP
9
11
SUBMERSIBLE PUMPS
Feet
Meters
10 gpm Performance Curves and Charts
300
3 HP
900
800
700
2 HP
200
600
150
1.5 HP
500
1 HP
400
100
20 FT
250
3/4 HP
300
1/2 HP
0.2 GPM
200
50
100
0
0
0
0.0
2
4
6
0.5
1.0
8
1.5
10
2.0
12
2.5
14
3.0
16 GPM
3.5
M3PH
HP
PSI
20
40
60
80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850
0
14.0 12.1 10.2 8.6
13.4 11.5 9.7
30
1/2
13.2 11.2 9.4
40
12.9 10.9 9.2
50
60
12.2 10.3 8.7
80
8.2
5.8
95
87
Shut-off PSI
12
12.6 10.6 9.0
78
7.5
7.2
3.0
61
52
7.8
8.1
5.5
Shut-off 240 ft
20
4.8
3.9
6.8
69
43
35
26
17
SUBMERSIBLE PUMPS
PSI
20
40
60
80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850
0
13.9 12.8 8.9
13.6 12.4 11.1 9.3
30
13.4 12.2 10.8 9.0
40
13.2 12.0 10.6 8.6
50
13.1 11.8 10.3 8.3
60
7.1
3.8
119
93
84
110 102
76
67
58
50
41
0
13.6 10.9 8.2
20
13.8 11.1 8.4
30
1
13.7 12.6 10.0 6.2
40
13.5 12.4 11.3 8.7
50
60
80
Shut-off PSI
19
13.3 12.2 11.2 10.2 6.7
13.2 12.1 11.0 10.0 8.9
13.9 12.8 11.7 10.7 9.7
162 154 145 136 128 119
8.5
6.8
3.6
110 102
93
84
63
41
0
1.5
Shut-off 395 ft
Shut-off PSI
12.5 11.2 9.4
5.5
4.9
19
13.7 11.9 10.0 7.4
20
13.8 12.1 10.1 7.7
30
13.1 11.2
9.1
6.0
40
13.9 12.2 10.3 7.9
3.7
50
13.2 11.4 9.3
6.3
12.4 10.5 8.1
4.1
60
80
Shut-off PSI
13.9 13.2 12.5 10.6 8.3
4.6
234 225 217 208 199 191 182 173 165 156 134 113
91
0
2.0
48
26
13.5 12.1 10.7 8.9
20
13.6 12.2 10.8 9.0
6.5
30
12.9 11.6 10.1 8.0
5.0
40
13.7 12.3 10.9 9.2
6.8
50
13.0 11.7 10.2 8.2
5.3
60
13.8 12.4 11.1
9.4
7.0
80
13.9 12.5 11.2 9.5
7.2
3.9
276 268 259 250 242 233 224 216 207 198 177 155 133 112
90
Shut-off PSI
0
6.3
3.0
3.3
3.6
68
47
25
13.6 12.4 11.3 10.1 8.8
20
3.0
69
3.2
Shut-off 560 ft
80
14.0 12.9 11.6 10.0 7.9
6.4
6.0
Shut-off 658 ft
3/4
Shut-off 295 ft
20
13.6 12.5 11.4 10.2 8.9
7.1
30
13.1 12.0 10.9 9.7
8.2
5.9
40
13.7 12.6 11.5 10.3 9.0
7.3
4.5
50
13.2 12.1 11.0 9.8
8.3
6.2
7.4
4.8
60
80
Shut-off PSI
13.8 12.7 11.6 10.4 9.1
13.9 12.8 11.7 10.5 9.2
7.6
3.9
5.0
372 364 355 346 338 329 320 312 303 294 273 251 229 208 186 165 143 121 100
6.9
4.2
Shut-off 880 ft
HP
78
56
35
13
13
SUBMERSIBLE PUMPS
200
180
FEET
METERS
3 HP
650
600
550
160
2 HP
500
140
120
450
400
1.5 HP
350
100
300
60
250
3/4 HP
200
10 FT
80
1 HP
150
40
0.5 GPM
100
20
0
50
0
0
0.0
14
3
0.5
6
1.0
1.5
9
2.0
12
2.5
15
3.0
3.5
18
4.0
21
4.5
24
5.0
GPM
M3PH
SUBMERSIBLE PUMPS
HP
PSI
20
40
60
80
100 120 140 160 180 200 250 300 350 400 450 500 550 600 650
0
10
19
20
30
20
40
15
14
11
10
18
16
14
18
16
13
10
9
20
18
16
13
17
15
13
7
60
17
15
12
6
70
14
11
80
11
69
61
12
Shut-off 220 ft
3/4
17
17
20
20
50
19
90
100
110
120
130
140
150
160
Shut-off PSI
87
78
52
43
35
26
0
18
12
18
16
7
19
18
15
13
20
50
60
1
20
19
17
15
12
8
17
15
12
7
6
20
19
17
14
11
18
16
14
10
5
10
4
78
69
70
20
18
16
13
80
18
16
13
9
8
90
15
12
100
12
8
110
7
19
Shut-off 280 ft
20
20
40
9
20
10
30
18
120
130
140
150
160
Shut-off PSI
113
104
95
87
61
52
43
35
13
15
SUBMERSIBLE PUMPS
PSI
20
40
60
80
100 120 140 160 180 200 250 300 350 400 450 500 550 600 650
0
19
15
10
17
13
10
20
30
20
40
50
60
19
70
1.5
80
20
19
20
19
15
19
17
13
20
18
17
15
10
20
18
17
15
13
5
18
16
15
13
11
6
19
18
16
15
13
11
17
16
14
13
10
5
9
4
99
91
90
20
19
17
16
14
12
100
19
17
15
14
12
9
8
110
17
15
14
12
120
15
13
11
7
130
13
11
7
140
10
6
150
5
9
Shut-off 369 ft
HP
160
Shut-off PSI
151
143
134
125
117
108
82
73
30
8
0
20
18
16
13
10
19
17
15
11
7
20
18
17
14
19
18
16
11
8
50
20
60
70
20
80
90
100
110
20
20
17
14
16
12
8
20
20
19
17
14
19
19
18
16
12
9
20
19
19
18
17
15
20
19
18
18
17
16
13
10
20
19
18
18
17
16
15
20
19
18
17
17
16
15
13
120
20
20
19
18
17
17
16
14
13
10
130
19
19
18
17
16
15
14
12
10
6
140
19
18
17
16
15
14
12
9
150
18
17
16
15
14
12
9
160
15
13
10
7
208
200
191
182
174
165
156
139
130
Shut-off PSI
19
18
148
109
16
87
66
6
Shut-off 501 ft
20
30
40
2
52
44
22
s
SUBMERSIBLE PUMPS
PSI
20
40
60
80
100 120 140 160 180 200 250 300 350 400 450 500 550 600 650
0
10
20
30
19
40
50
19
60
70
3
18
16
13
17
15
12
18
16
14
9
18
15
12
10
19
19
80
18
16
14
18
15
13
10
18
17
14
18
15
13
18
17
14
11
90
19
18
16
13
6
100
19
17
14
11
7
110
120
130
140
150
160
Shut-off PSI
277
19
18
16
13
19
19
17
15
12
8
19
19
18
16
13
19
19
18
17
15
12
14
9
178
156
19
18
18
17
16
19
19
18
18
17
16
15
14
13
269
260
251
243
234
225
217
208
199
134
113
91
69
8
Shut-off 660 ft
HP
48
26
5
17
SUBMERSIBLE PUMPS
240
FEET
METERS
800
5 HP
750
220
700
200
650
180
600
550
160
500
450
120
400
100
3 HP
2 HP
350
300
80
10 FT
140
1.5 HP
1 GPM
250
1 HP
60
40
200
3/4 HP
150
100
20
0
50
0
0
0.0
18
5
1.0
10
2.0
15
3.0
20
4.0
25
5.0
30
6.0
7.0
GPM
M3PH
SUBMERSIBLE PUMPS
HP
PSI
20
40
60
80
0
10
20
30
40
25
50
17
100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750
27
22
27
21
14
12
26
20
25
19
10
18
7
49
40
15
Shut-off 153 ft
60
70
3/4
80
90
100
110
120
130
140
150
160
Shut-off PSI
58
32
23
14
6
27
23
19
26
23
18
13
11
0
10
20
30
40
22
18
21
17
9
16
40
31
25
20
24
20
16
24
19
15
19
13
50
27
60
70
80
12
Shut-off 212 ft
1
26
25
14
90
100
110
120
130
140
150
160
Shut-off PSI
83
75
66
57
49
23
14
5
19
SUBMERSIBLE PUMPS
HP
PSI
20
40
60
80
100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750
0
27
25
23
15
27
25
23
20
7
27
25
22
19
16
9
10
20
30
50
60
26
24
22
19
15
26
24
21
18
14
7
14
52
43
26
24
21
18
27
26
23
20
17
13
12
70
25
23
20
17
1 1/2 80
22
19
16
11
9
90
19
15
100
15
8
110
6
Shut-off 280 ft
40
120
130
140
150
160
104
95
87
78
69
61
35
13
27
22
16
26
25
19
10
0
10
20
27
26
24
22
16
27
26
24
22
20
11
27
26
24
22
19
17
12
30
40
50
60
27
70
2
80
27
25
24
21
19
16
25
23
21
19
16
12
11
26
25
23
20
18
15
26
25
22
20
18
15
10
8
90
24
22
20
17
14
100
22
19
17
14
7
13
113
104
110
19
17
120
16
12
130
11
Shut-off 340 ft
Shut-off PSI 113
140
150
160
Shut-off PSI 139
130
121
95
87
78
69
61
39
17
20
SUBMERSIBLE PUMPS
20
40
60
80
100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750
0
10
20
30
40
70
3
27
80
27
5
10
26
22
18
27
25
20
15
11
26
23
18
26
25
21
16
27
26
25
23
19
12
26
24
23
21
16
27
26
24
22
21
19
13
25
24
22
20
19
17
7
26
25
24
22
20
18
16
14
8
110
27
26
25
23
22
20
18
16
13
26
25
23
21
20
18
16
13
7
130
24
23
21
19
18
15
12
140
23
21
19
17
15
11
150
21
19
17
14
10
160
13
8
175
167
158
132
123
184
15
27
120
Shut-off PSI 193
18
20
27
90
100
22
24
27
50
60
26
27
149
141
115
93
71
9
Shut-off 465 ft
PSI
50
28
6
0
27
26
24
22
19
15
10
27
25
23
21
17
13
20
27
26
25
22
19
16
10
30
27
25
24
21
18
14
7
25
22
20
16
11
8
40
27
26
50
27
25
24
21
18
14
60
26
25
23
20
16
11
8
70
27
26
24
21
18
14
80
26
25
23
20
17
12
9
90
27
26
24
22
19
15
100
26
25
23
20
17
12
9
110
120
27
130
140
150
27
26
24
22
19
15
26
25
23
21
17
13
10
27
27
26
26
24
22
19
15
27
27
26
26
25
23
21
17
13
10
27
27
26
26
25
25
22
19
16
160
27
26
26
25
25
24
23
22
21
18
14
7
Shut-off PSI 326
317
309
300
291
283
274
265
257
248
226
205
183
161
140
118
96
75
10
Shut-off 772 ft
HP
53
32
10
21
SUBMERSIBLE PUMPS
Dimensional Data
Plastic with 2-Wire Motors
GPM HP Stages
A
A
A
B
C
PE
WT.
PMA
WT.
5
1/2
3/4
1
13
18
21
17.54
21.51
22.27
9.51
10.64
11.73
27.05
32.15
34.00
8
10
11
26
29
33
7
1/2
3/4
1
1.5
9
12
15
21
14.30
16.65
19.00
23.70
9.51
10.64
11.73
15.10
23.81
27.29
30.73
38.90
4
7
8
10
24
28
33
42
10
1/2
3/4
1
1.5
7
9
12
17
12.73
14.30
16.65
20.57
9.51
10.64
11.73
15.10
22.49
24.94
28.38
35.67
6
7
8
12
24
28
31
38
15
3/4
1
1.5
8
10
14
16.12
18.34
21.66
10.64
11.73
15.10
26.76
30.07
36.76
7
7
10
28
31
40
20
3/4
1
1.5
5
7
9
12.79
15.01
17.23
10.64
11.73
15.10
23.43
26.74
32.33
6
7
8
27
30
40
C
C
Plastic with 3-Wire Motors
B
B
Notes: All lengths are in inches
All weights are in pounds
Maximum diameter with cable guard is 3.90"
22
GPM HP Stages
A
B
C
PE
WT.
PMA
WT.
5
1/2
3/4
1
13
18
21
17.54
21.51
22.27
9.51
10.64
11.73
27.05
32.15
34.00
8
10
10
25
30
34
7
1/2
3/4
1
1.5
9
12
15
21
14.30
16.65
19.00
23.70
9.51
10.64
11.73
13.60
23.81
27.29
30.73
37.30
4
7
8
10
24
28
33
42
10
1/2
3/4
1
1.5
7
9
12
17
12.73
14.30
16.65
20.57
9.51
10.64
11.73
13.60
22.49
24.94
28.38
34.17
6
7
8
12
24
28
32
39
15
3/4
1
1.5
8
10
14
16.12
18.34
21.66
10.64
11.73
13.60
26.76
30.07
35.26
7
7
10
27
30
39
20
3/4
1
1.5
5
7
9
12.79
15.01
17.23
10.64
11.73
13.60
23.43
26.74
30.83
6
7
8
27
33
39
SUBMERSIBLE PUMPS
Dimensional Data
Stainless Steel with 2-Wire Motors
GPM HP Stages
Stainless Steel with 3-Wire Motors
A
B
C
PE
WT.
PMA
WT.
5
1/2
3/4
1
1.5
13
18
21
28
17.95
21.91
24.29
31.92
9.51
10.64
11.73
15.10
27.46
32.55
36.02
47.02
9
11
12
14
26
29
33
43
7
1/2
3/4
1
1.5
9
12
15
21
14.62
16.97
19.32
24.03
9.51
10.64
11.73
15.10
24.13
26.61
31.05
39.13
5
8
9
11
24
28
33
42
10
1/2
3/4
1
1.5
7
9
12
17
13.05
14.62
16.97
20.89
9.51
10.64
11.73
15.10
22.66
25.26
28.70
35.99
7
8
9
13
24
28
31
38
15
3/4
1
1.5
8
10
14
16.44
18.66
21.98
10.64
11.73
15.10
27.08
30.39
37.08
8
8
11
28
31
40
20
3/4
1
1.5
5
7
9
13.11
15.33
17.55
10.64
11.73
15.10
23.75
27.06
32.65
7
8
9
27
30
40
GPM HP Stages
A
B
C
PE
WT.
PMA
WT.
5
1/2
3/4
1
1.5
13
18
21
28
17.95
21.91
24.29
31.92
9.51
10.64
11.73
13.60
27.46
32.55
36.02
45.52
9
11
12
14
25
30
34
44
7
1/2
3/4
1
1.5
2
9
12
15
21
24
14.62
16.97
19.32
24.03
26.38
9.51
10.64
11.73
13.60
15.10
24.13
26.61
31.05
37.63
41.48
5
8
9
11
13
24
28
33
42
N/A
10
1/2
3/4
1
1.5
2
3
7
9
12
17
19
26
13.05
14.62
16.97
20.89
22.46
30.03
9.51
10.64
11.73
13.60
15.10
19.04
22.66
25.26
28.70
34.49
37.56
49.07
7
8
9
13
15
22
24
28
32
39
N/A
N/A
15
3/4
1
1.5
2
3
8
10
13
18
24
16.44
18.66
21.98
27.53
30.76
10.64
11.73
13.60
15.10
19.04
27.08
30.39
35.58
42.63
49.80
8
8
11
13
16
27
30
39
N/A
N/A
20
3/4
1
1.5
2
3
5
5
7
9
11
15
25
13.11
15.33
17.55
19.77
24.20
37.38
10.64
11.73
13.60
15.10
19.04
29.19
23.75
27.06
31.15
34.87
43.24
66.57
7
8
9
10
12
19
27
33
39
N/A
N/A
N/A
Notes: PE - pump end only
PMA - pump and motor assembly
23
SUBMERSIBLE PUMPS
30, 50, and 85 gpm Models
Features:
■■ Stainless steel discharge head and motor bracket.
®
■■ High flow impellers and stages are glass-filled Noryl for
maximum efficiency.
■■ Ceramic shaft sleeve and rubber discharge bearing eliminates
sand wear.
■■ Intermediate bearing for increased shaft stability.
■■ Floating eye and hub seals for improved performance and efficiency.
■■ Stainless steel hex pump shaft, shell and shaft coupling.
■■ High capacity upthrust assembly for protection during start-up and
operation (50 and 85 gpm models).
■■ Powered by Franklin’s corrosion-resistant 4" submersible motors.
■■ 2" NPT discharge.
■■ Check valve must be ordered separately. See page 60.
Noryl ® is a registered trademark of G.E.
24
SUBMERSIBLE PUMPS
30-85 gpm Stainless Steel Units Ordering Information (See pgs. 2-3 for model number explanation)
GPM
HP
Stages
1 - 10 HP 4" Pump Ends
Ordering Info.
Model No.
Order No.
Dimensions
Pump End Only
Wt.
1
6
30WA1S4-PE
92203010
15.00
9
1.5
8
30WA15S4-PE
92203015
17.50
10
2
3
5
7.5
10
14
22
34
30WA2S4-PE
30WA3S4-PE
30WA5S4-PE
30WA7S4-PE
92203020
92203030
92203050
92203075
20.00
25.00
35.00
52.17
11
13
17
25
50
1.5
2
3
5
7.5
10
4
6
8
13
17
24
50WA15S4-PE
50WA2S4-PE
50WA3S4-PE
50WA5S4-PE
50WA7S4-PE
50WA10S4-PE
92205015
92205020
92205030
92205050
92205075
92205100
15.00
21.00
25.50
36.75
45.25
61.00
14
15
17
21
25
31
85
2
3
5
7.5
5
7
12
19
85WA2S4-PE
85WA3S4-PE
85WA5S4-PE
85WA7S4-PE
92208520
92208530
92208550
92208575
22.56
28.56
43.56
64.50
15
17
21
27
30
Notes: All lengths are in inches. Discharge is 2" NPT. Maximum diameter with cable guard is 3.90". All weights are in pounds.
25
SUBMERSIBLE PUMPS
FEET
60
1200
55
1100
50
350
300
1000
EFFICIENCY %
METERS
45
7.5 hp
900
250
800
700
200
5 hp
600
150
500
3 hp
400
100
2 hp
300
50
50 FT
1.5 hp
200
1 hp
2.5 GPM
100
0
0
5
0
1
HP
PSI
1
0
10
20
30
40
50
60
70
80
20
Shut-off PSI
26
43
37
30
24
14
65
10
15
2
40
43
38
31
25
16
57
3
20
4
25
5
30
6
7
35
40
8
9
45
10
55 GPM
50
11
12
M3PH
Depth to Pumping Water Level, or Lift, in Feet.
100 120 140 160 180 200 250 300 350 400 450 500 550 600
60
80
44
39
32
26
18
40
33
26
19
34
27
20
28
21
22
11
13
48
39
31
22
13
5
Shut-off 171 ft
0
SUBMERSIBLE PUMPS
Shut-off PSI
0
10
20
30
40
50
60
70
80
2
Shut-off PSI
0
10
20
30
40
50
60
70
80
3
Shut-off PSI
0
10
20
30
40
50
60
70
80
5
Shut-off PSI
44
42
39
35
31
27
116
44
43
40
38
163
45
268
60
80
45
42
38
34
29
24
18
43
39
34
30
25
19
40
35
30
26
20
10
36
31
26
21
12
31
27
22
14
27
23
15
23
16
18
81
72
63
55
46
37
29
20
11
45
42
39
35
31
28
24
107
45
43
39
36
32
28
24
20
99
45
43
40
36
32
29
25
21
14
90
43
40
37
33
29
25
21
15
41
37
33
30
26
22
16
38
34
30
26
22
17
34
31
27
23
18
10
31
27
24
19
11
28
24
20
12
19
11
81
73
64
55
47
38
16
45
44
42
39
37
34
31
28
128
45
44
42
40
37
34
31
28
25
120
44
42
40
37
34
32
29
26
23
111
42
40
38
35
32
29
26
23
19
102
41
38
35
32
29
27
24
20
15
94
38
36
33
30
27
24
21
15
32
29
27
24
20
14
28
23
19
13
18
12
85
63
42
20
45
44
43
42
40
39
37
207
45
44
43
42
40
39
37
36
198
45
44
43
42
41
39
38
36
34
190
43
42
40
39
37
36
34
32
31
168
40
39
37
35
34
32
31
29
27
146
37
35
34
32
30
29
27
25
23
125
45
42
38
33
29
24
17
44
43
41
38
35
154
45
44
259
45
43
41
39
36
33
145
45
44
43
250
45
43
41
39
36
33
30
137
45
44
43
42
242
45
44
43
42
41
233
45
44
44
42
41
40
224
45
45
44
43
41
40
38
216
Shut-off 226 ft
45
41
37
32
28
23
16
89
40
Shut-off 288 ft
20
Shut-off 396 ft
1.5
0
10
20
30
40
50
60
70
80
100 120 140 160 180 200 250 300 350 400 450 500 550 600
33
32
30
28
27
25
22
19
15
103
30
28
26
24
22
19
15
26
24
21
18
14
21
18
13
12
81
60
38
16
Shut-off 638 ft
PSI
HP
PSI 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
7.5
0
10
20
30
40
50
60
70
80
Shut-off PSI
45
373
45
45
364
45
44
355
45
44
43
347
45
44
43
43
338
45
44
43
43
42
41
316
45
44
43
42
42
41
40
39
295
44
43
42
41
41
40
39
38
37
274
42
41
40
40
39
38
37
36
35
251
40
39
39
38
37
36
35
34
33
230
38
38
37
36
35
34
33
32
31
208
36
36
35
34
33
32
30
29
28
186
34
33
32
31
30
29
28
26
25
165
32
31
30
29
27
25
24
23
21
143
30
29
27
26
24
22
20
18
15
121
27
26
24
22
20
18
15
12
24
22
20
17
14
11
19
17
14
11
13
10
100
78
56
35
Shut-off 980 ft
HP
27
SUBMERSIBLE PUMPS
FEET
60
240
10 hp
750
220
55
700
50
200
650
45
180
600
EFFICIENCY %
METERS
7.5 hp
550
160
500
140
450
120
400
100
5 hp
350
300
60
40
3 hp
250
200
2 hp
150
1.5 hp
100
20
0
28
25 FT
80
5 GPM
50
0
0
10
0
2
20
4
30
6
40
8
50
10
12
60
14
70
16
80
18
GPM
M3PH
SUBMERSIBLE PUMPS
Shut-off PSI
2
Shut-off PSI
3
Shut-off PSI
5
Shut-off PSI
0
10
20
30
40
50
60
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
80
90
100
40
66
57
42
67
58
44
20
56
47
71
62
51
38
22
76
72
67
61
54
106
71
68
65
61
58
54
175
63
52
40
24
67
73
68
62
55
46
97
72
69
65
62
58
54
49
167
60
69
59
47
24
61
49
28
51
31
34
38
30
21
12
66
56
43
28
57
45
30
47
33
65
54
41
26
58
69
63
56
48
37
89
72
69
66
62
59
55
50
45
158
50
69
64
57
49
39
28
80
69
66
63
59
55
51
45
39
149
Shut-off 149 ft
20
35
18
21
41
32
24
15
70
65
58
50
40
29
66
59
51
42
31
60
52
43
32
20
53
44
34
22
71
63
54
71
68
64
61
57
53
48
42
35
27
123
115
70
67
63
60
56
51
46
40
33
141
70
67
64
60
56
52
47
41
34
26
132
Shut-off 195 ft
1.5
0
10
20
30
40
50
60
80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650
46
35
24
37
25
45
37
28
68
65
61
57
53
48
43
36
28
20
65
62
58
54
49
43
37
30
21
62
59
54
50
44
38
31
23
54
49
43
37
29
21
42
36
28
20
27
106
97
76
54
32
Shut-off 265 ft
PSI
Shut-off 425 ft
HP
29
SUBMERSIBLE PUMPS
PSI
Depth to Pumping Water Level, or Lift, in Feet. Shaded Areas Indicate Most Efficient Performance
20
40
60
80
100 120 140 160 180 200 250 300 350 400 450 500 550 600 650
0
10
20
30
40
71
50
60
7.5
72
70
71
68
63
56
48
38
27
68
66
59
52
43
33
22
72
70
68
65
63
56
48
39
28
72
70
67
65
63
60
53
44
34
23
69
67
65
62
60
57
49
40
29
24
71
69
67
64
62
59
56
53
45
35
71
69
66
64
61
59
56
53
49
40
30
68
66
64
61
58
55
52
48
45
36
25
70
70
80
68
66
63
61
58
55
52
48
45
41
31
90
65
63
60
57
54
51
48
44
41
37
26
100
62
60
57
54
51
47
44
40
36
32
20
110
59
57
53
50
47
43
39
35
31
26
21
120
56
53
50
46
43
39
35
30
26
130
52
49
46
42
38
34
30
25
20
140
49
45
41
37
33
29
24
19
150
45
41
37
33
28
24
160
31
26
21
232
223
214
206
197
188
180
171
Shut-off PSI
162
154
132
30
110
Shut-off 555 ft
HP
89
67
45
SUBMERSIBLE PUMPS
PSI
Depth to Pumping Water Level, or Lift, in Feet. Shaded Areas Indicate Most Efficient Performance
20
40
60
80
100 120 140 160 180 200 250 300 350 400 450 500 550 600 650
0
10
71
20
30
40
50
60
80
65
61
57
51
45
39
31
67
63
59
54
49
42
35
27
23
72
71
69
66
61
57
52
46
39
31
72
71
69
68
64
59
55
49
43
36
28
24
72
70
69
67
66
62
57
52
46
40
32
72
70
69
67
66
64
60
55
50
43
36
28
72
70
68
67
65
64
62
58
53
47
40
33
24
71
70
68
67
65
64
62
60
55
50
44
37
29
20
71
70
68
66
65
63
62
60
58
53
47
41
33
25
21
70
10
69
90
71
69
68
66
65
63
61
60
58
56
51
44
37
29
100
69
68
66
64
63
61
59
57
56
53
48
41
34
26
22
110
67
66
64
62
61
59
57
55
53
51
45
38
30
120
65
64
62
61
59
57
55
53
51
48
42
34
26
130
64
62
60
58
57
55
52
51
48
45
39
31
22
140
62
60
58
56
54
52
50
48
45
42
35
27
150
60
58
56
54
52
50
47
45
42
39
31
23
160
53
51
48
46
43
41
38
35
31
28
326
317
308
300
291
282
274
265
256
248
226
204
Shut-off PSI
183
161
139
118
22
Shut-off 772 ft
HP
96
74
53
31
SUBMERSIBLE PUMPS
FEET
METERS
60
120
400
55
350
50
300 5 hp
45
100
80
60
EFFICIENCY %
7.5 hp
250
200
3 hp
150
2 hp
25 FT
40
100
5 GPM
20
50
0
32
0
0
10
0
2
20
4
30
6
40
8
10
50
12
60
14
70
80
16
18
90
20
100 110
22
24
26
120 130
28
GPM
30 M3PH
SUBMERSIBLE PUMPS
Shut-off PSI
3
0
10
20
30
40
50
60
Shut-off PSI
5
0
10
20
30
40
50
60
70
80
90
100
Shut-off PSI
7.5
Shut-off PSI
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
40
60
80
92
64
40
67
45
48
110
84
58
113
88
61
35
43
35
26
17
9
106
88
69
53
108
90
71
55
30
110
93
74
57
35
96
76
59
39
79
61
43
64
55
46
38
100
98
85
73
62
53
41
115
110
100
87
75
63
54
43
106
113
107
100
92
84
76
68
61
55
48
41
113
108
101
93
85
77
69
62
55
49
42
32
175
167
111
101
89
76
65
55
45
112
103
91
78
66
56
46
30
97
89
114
109
102
94
86
78
70
63
56
50
43
33
158
115
109
103
95
87
79
71
64
57
51
44
35
149
Shut-off 120 ft
20
64
46
49
Shut-off 167 ft
2
0
10
20
30
40
50
60
100 120 140 160 180 200 250 300 350 400 450 500 550
29
20
12
113
104
92
80
68
58
48
33
106
94
81
69
59
49
35
96
83
71
60
51
38
80
115
110
104
96
88
80
72
65
58
52
45
36
141
85
72
62
52
40
74
63
53
42
64
55
44
41
Shut-off 285 ft
PSI
71
63
54
45
37
15
116
111
105
98
90
81
73
66
59
53
46
38
112
108
99
91
82
74
67
60
53
47
39
107
100
92
83
75
68
61
54
48
40
101
93
85
76
69
61
55
49
41
31
94
86
77
70
62
56
50
42
33
76
68
61
55
49
41
31
60
54
47
40
46
38
132
123
115
106
97
76
54
32
Shut-off 425 ft
HP
33
SUBMERSIBLE PUMPS
50, 75, 100 and 125 gpm Models
Features:
■■ Heavy-duty stainless steel discharge head and motor bracket.
■■ Stainless steel shaft, shell, intake screen and cable shield for corrosion
resistance and longer life.
■■ Stainless steel wear ring and Urethane floating eye seal for improved
performance and efficiency.
■■ Glass-filled Noryl® impeller stage assemblies for incredible strength
and durability.
■■ Ceramic shaft sleeve and rubber discharge bearing minimizes
bearing wear and shaft misalignment without affecting
pump efficiency.
■■ 3" NPT heavy-duty stainless steel discharge head.
■■ Fastener kit supplied for both 4" and 6" motors. Enabling 5-10 hp
units to be mounted to either a 4" or 6" submersible motor.
■■ One year unconditional warranty against failure from sand locking
in abrasive well conditions.
34
SUBMERSIBLE PUMPS
Ordering Information (See pgs. 2-3 for model number explanation)
6" Pump Ends
Ordering Info.
Motor
Fit
Model No.
Order No.
Dimensions
Pump End Only
WT.
94985003
94985004
94985005
94985008
94985011
94985015
13.51
15.13
16.76
21.63
26.51
32.94
30
31
32
36
40
46
75WA3S6-PE
75WA5S6-PE
75WA7S6-PE
75WA10S6-PE
75WA15S6-PE
75WA20S6-PE
75WA25S6-PE
94987503
94987505
94987507
94987509
94987513
94987517
94987523
13.51
16.76
20.01
23.26
29.76
36.19
46.00
30
32
35
38
43
48
52
4" & 6"
4" & 6"
4" & 6"
6"
6"
6"
100WA5S6-PE
100WA7S6-PE
100WA10S6-PE
100WA15S6-PE
100WA20S6-PE
100WA25S6-PE
94980003
94980005
94980006
94980009
94980013
94980016
14.62
18.51
20.49
26.31
34.07
39.94
30
32
34
38
43
47
4" & 6"
4" & 6"
4" & 6"
6"
6"
6"
6"
6"
125WA5S6-PE
125WA7S6-PE
125WA10S6-PE
125WA15S6-PE
125WA20S6-PE
125WA25S6-PE
125WA30S6-PE
125WA40S6-PE
94982502
94982503
94982504
94982507
94982509
94982511
94982513
94982518
12.94
15.05
17.13
23.37
27.54
31.70
35.87
46.27
29
30
31
35
38
40
43
48
GPM
HP
Stages
50
1.5
2
3
5
7.5
10
3
4
5
8
11
15
4"
4"
4"
4" & 6"
4" & 6"
4" & 6"
50WA15S6-PE
50WA2S6-PE
50WA3S6-PE
50WA5S6-PE
50WA7S6-PE
50WA10S6-PE
75
3
5
7.5
10
15
20
25
3
5
7
9
13
17
23
4"
4" & 6"
4" & 6"
4" & 6"
6"
6"
6"
100
5
7.5
10
15
20
25
3
5
6
9
13
16
125
5
7.5
10
15
20
25
30
40
2
3
4
7
9
11
13
18
Notes: All lengths are in inches. Discharge is 3" NPT. Maximum diameter with cable guard is 5.5".
Pump and motor will be individually cartoned and require assembly. All weights are in pounds.
35
SUBMERSIBLE PUMPS
FEET
65
260
240
60
10 hp
800
55
220
700
50
600 7.5 hp
45
EFFICIENCY %
METERS
200
180
160
500
140
120
5 hp
400
100
300
3 hp
80
200
50 FT
2 hp
60
1.5 hp
2.5 GPM
40
100
20
0
0
0
0
36
5
10
2
15
20
4
25
6
30
35
8
40
45
10
50
55
12
60
14
65
70
16
75
80 GPM
3
18 M PH
SUBMERSIBLE PUMPS
2
0
20
30
40
50
60
Shut-off PSI
3
0
20
30
40
50
Shut-off PSI
5
0
20
30
40
50
60
Shut-off PSI
7.5
68
63
105
70
173
61
38
21
51
25
41
30
58
46
35
51
43
34
25
17
8
63
46
37
23
57
38
25
49
27
31
16
62
53
44
34
17
65
69
54
45
35
20
41
67
60
52
42
32
74
57
48
39
31
22
13
5
66
53
46
38
28
62
61
47
39
30
55
40
31
15
49
33
18
42
21
68
63
57
97
65
59
51
44
79
70
60
52
45
37
71
17
69
64
58
50
88
53
45
36
27
6
66
63
59
54
50
121
70
63
59
55
50
45
112
67
60
56
51
46
41
103
64
56
51
47
42
37
95
55
46
41
36
29
20
73
45
35
28
18
34
16
69
66
62
58
138
69
66
62
58
54
129
51
30
70
68
65
187
70
68
66
63
178
68
66
64
61
169
68
63
60
58
54
148
63
57
54
51
47
126
57
50
47
43
39
104
70
67
164
68
65
155
68
65
61
147
247
HP
PSI
10
0
20
30
40
50
60
239
230
221
213
69
204
70
67
195
Shut-off 158 ft
80
68
47
37
16
0
20
30
40
50
Shut-off PSI
Shut-off PSI
67
59
51
41
83
60
Shut-off 211 ft
Shut-off PSI
66
56
44
33
60
40
Shut-off 263 ft
20
Shut-off 418 ft
1.5
0
20
30
40
50
100 120 140 160 180 200 250 300 350 400 450 500 550
49
42
38
34
28
83
42
33
27
21
32
19
18
61
39
18
Shut-off 591 ft
PSI
100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750
306
298
289
281
70
272
70
68
263
70
68
66
65
242
68
66
64
62
60
220
68
64
62
60
58
56
198
64
60
57
55
53
50
177
59
55
52
50
47
45
155
54
50
47
44
41
38
133
49
44
41
38
34
31
112
43
37
34
30
26
21
90
37
29
25
20
28
19
18
68
47
25
Shut-off 808 ft
HP
Discharge 3" NPT
37
SUBMERSIBLE PUMPS
FEET
70
25 hp
1200
65
350
1100
300
60
1000
55
20 hp
900
250
EFFICIENCY %
METERS
50
800
15 hp
700
200
600
10 hp
500
7.5 hp
400
100
50
300
5 hp
200
3 hp
50 FT
150
5 GPM
100
0
38
0
0
10
0
2
20
4
30
6
40
8
50
10
12
60
14
70
80
16
18
90
20
100
22
110
24
26
120 GPM
M3PH
SUBMERSIBLE PUMPS
0
20
30
7.5
40
50
60
Shut-off PSI
113
205
114
109
196
64
26
44
35
27
18
9
1
105
99
91
81
73
86
116
100
92
82
74
67
77
106
93
84
75
68
56
69
102
85
76
69
58
24
60
96
77
70
61
31
88
71
63
37
51
108
103
99
93
87
124
116
104
99
94
88
81
116
109
100
95
88
82
76
107
108
104
101
97
92
153
112
105
101
98
93
88
144
112
106
102
97
142
114
109
106
187
113
109
254
113
109
107
245
114
110
107
105
237
0
20
30
40
50
60
PSI
114
107
103
98
92
133
115
110
106
103
179
116
111
107
104
100
170
111
107
104
100
96
161
450
500
550
Shut-off 162 ft
77
79
64
43
73
47
41
43
34
25
4
105
96
89
83
76
71
98
101
90
84
77
71
65
90
97
85
78
72
66
59
81
83
71
65
57
43
59
38
16
109
102
98
94
89
84
135
106
99
94
89
84
79
127
98
89
84
78
74
69
105
88
78
73
68
63
55
84
77
67
61
54
42
22
62
70
56
40
54
66
52
39
18
50
40
19
353
345
336
327
114
107
105
103
101
98
206
107
103
100
98
95
91
185
102
97
94
90
87
83
163
97
90
86
82
79
76
142
89
82
78
75
73
70
120
81
75
72
69
66
63
98
74
69
66
62
56
47
77
68
61
55
45
31
60
43
28
41
55
33
12
103
100
98
95
93
90
100
95
92
89
86
83
94
89
86
83
80
77
88
82
79
77
74
72
82
76
74
72
70
67
76
72
69
67
64
61
71
67
64
60
55
47
66
59
54
46
35
115
107
104
102
100
98
96
58
44
33
114
110
108
113
107
106
104
102
101
43
113
110
108
106
104
319
297
275
254
232
210
189
167
145
124
102
80
59
37
15
115
110
107
105
103
228
Shut-off 727 ft
112
263
Shut-off PSI
HP
111
106
102
150
89
57
120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950
0
20
30
15
40
50
60
Shut-off PSI
20
110
103
97
88
103
112
104
98
89
80
95
80
101
73
53
Shut-off 936 ft
PSI
98
83
70
40
53
111
105
159
0
20
30
10
40
50
60
Shut-off PSI
HP
106
96
81
68
61
60
108
85
72
47
Shut-off 259 ft
0
20
30
5
40
50
60
Shut-off PSI
40
Shut-off 387 ft
20
0
20
30
3
40
50
Shut-off PSI
100 120 140 160 180 200 250 300 350 400
Shut-off 493 ft
PSI
250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200
0
20
30
25
40
50
60
Shut-off PSI
114
113
412
116
114
112
111
110
391
116
112
111
109
108
107
369
112
109
108
107
106
105
347
109
107
106
104
103
102
326
107
104
103
101
100
98
304
104
101
100
98
96
94
283
101
98
96
94
92
90
261
97
93
91
89
87
85
239
93
89
87
85
83
80
218
89
84
82
80
78
76
196
84
80
78
75
73
71
174
79
75
73
71
69
66
153
75
70
68
66
63
60
131
70
65
63
60
56
52
109
65
59
56
51
47
41
88
59
51
46
40
33
24
66
50
39
31
23
38
21
19
44
23
1
Shut-off 1202 ft
HP
Discharge 3" NPT
39
SUBMERSIBLE PUMPS
70
25 hp
1000
65
900
60
20 hp
250
800
55
700
50
EFFICIENCY %
300
FEET
METERS
200
15 hp
600
500
10 hp
400
100
7.5 hp
300
50 FT
150
5 hp
200
50
5 GPM
100
0
0
0
0
40
10
20
5
30
40
10
50
60
70
15
80
90
20
100 110 120 130 140 150 GPM
25
30
M3PH
SUBMERSIBLE PUMPS
7.5
0
20
30
40
50
60
70
Shut-off PSI
10
0
20
30
40
50
50
70
Shut-off PSI
15
74
65
57
124
115
130
127
161
125
116
106
121
128
120
153
126
117
107
96
113
129
121
113
144
119
78
49
104
54
85
62
48
39
31
22
13
123
104
92
77
59
34
115
93
79
62
38
107
82
64
42
79
37
127
118
109
97
84
104
121
111
101
88
73
53
87
131
113
102
90
75
56
30
78
32
129
120
110
99
86
71
95
69
61
52
30
9
131
123
115
107
97
127
132
124
116
108
99
88
118
125
117
109
100
90
78
110
118
110
101
91
79
66
101
127
111
102
92
81
68
52
92
121
104
94
83
70
54
35
84
102
81
67
51
31
79
48
28
130
122
114
105
135
PSI
20
0
20
30
40
50
60
70
Shut-off PSI
238
229
221
130
212
131
126
204
Shut-off 191 ft
115
95
71
38
247
HP
Shut-off PSI
125
110
89
64
127
112
92
68
32
80
130
98
75
44
0
20
30
40
50
60
70
Shut-off PSI
25
60
132
127
122
195
132
128
123
118
186
128
124
119
113
178
129
124
119
114
109
169
Shut-off 320 ft
Shut-off PSI
40
45
Shut-off 393 ft
20
62
40
19
123
118
113
108
102
95
147
123
112
107
101
94
86
78
126
111
99
93
85
76
66
55
104
98
83
74
64
53
39
82
62
51
37
61
32
82
61
39
17
Shut-off 590 ft
5
0
20
30
40
50
60
70
100 120 140 160 180 200 250 300 350 400 450 500 550
200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000
132
280
132
128
125
258
0
20
30
40
50
60
70
359
338
131
128
124
121
117
236
131
128
316
127
124
120
117
113
109
215
127
120
116
112
109
105
101
193
119
112
108
104
100
96
91
172
111
104
99
95
90
85
80
150
103
94
89
84
79
72
65
128
94
83
78
71
64
56
47
107
82
70
63
55
45
35
69
53
44
33
52
31
85
63
42
130
128
125
123
294
130
128
125
122
119
117
273
130
124
122
119
116
113
110
251
124
118
116
112
109
106
102
229
118
112
109
105
102
98
94
208
111
105
101
97
94
90
85
186
104
97
93
89
85
80
75
164
96
88
84
79
75
69
64
143
87
79
74
68
63
57
50
121
Shut-off 846 ft
PSI
78
68
62
56
49
41
33
99
67
55
48
40
31
53
39
30
37
Shut-off 1030 ft
HP
Discharge 3" NPT
41
SUBMERSIBLE PUMPS
65
40 hp
1200
60
350
300
1100
55
1000
50
30 hp
900
250
EFFICIENCY %
FEET
METERS
800
25 hp
700
200
20 hp
600
500
150
15 hp
400
300
10 hp
7.5 hp
200
50
50 FT
100
5 hp
5 GPM
100
10
0
20
5
HP
PSI
5
0
20
30
40
20
Shut-off PSI
7.5
Shut-off PSI
42
30
0
20
30
40
50
60
70
126
82
48
147
127
101
60
77
40
50
10
40
60
131
88
94
39
30
150
130
105
67
133
109
73
69
60
60
70
80
15
90 100 110 120 130 140 150 160 170 GPM
20
25
30
35
M3PH
80 100 120 140 160 180 200 250 300 350 400 450 500 550
140
106
62
22
13
4
135
112
79
116
85
51
43
Shut-off
130 ft
0
141
90
122
48
99
64
34
25
17
8
Shut-off 198 ft
0
0
SUBMERSIBLE PUMPS
15
185
252
168
243 234 226
292 283
HP
PSI
30
0
20
30
40
50
60
70
71
147
159
53
148
141
150
149
142
133
142
217
208 200
129
88
47
114
54
45
45
36
27
6
145
137
128
117
106
116
135
126
116
104
89
72
94
143
134
125
133
150
191
144
136
126
116
124
145
182
146
140
174
Shut-off 263 ft
62
143
109
84
145
139
132
125
152
275
266
257
249
240
231
210
134
114
101
87
68
44
112
84
65
81
72
51
29
144
138
131
124
117
108
130
143
130
123
115
107
97
85
109
129
114
105
95
83
68
49
87
150
146
141
188
149
145
140
135
130
166
144
140
135
129
123
115
145
113
93
81
65
45
91
62
41
59
65
44
22
143
134
128
121
114
104
94
123
133
120
112
103
92
78
63
101
119
101
90
76
60
42
99
74
57
71
80
58
37
250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050
270
Shut-off PSI
Shut-off PSI
176
137
120
100
69
125
106
79
0
20
30
40
50
60
70
Shut-off PSI
40
149
135
118
97
63
79
139
122
103
74
0
20
30
40
50
60
70
Shut-off PSI
25
148
132
115
93
88
0
20
30
40
50
60
70
Shut-off PSI
20
146
130
112
97
60
Shut-off 467 ft
Shut-off PSI
144
128
105
40
Shut-off 601 ft
20
Shut-off 734 ft
10
0
20
30
40
50
60
70
80 100 120 140 160 180 200 250 300 350 400 450 500 550
150
248
149
145
141
226
149
145
141
136
132
205
144
140
136
132
127
122
183
0
20
30
40
50
60
70
409
387
365
344
322
143
135
131
126
122
116
110
161
149
300
134
126
121
115
109
102
95
140
125
114
108
101
93
84
74
118
113
100
92
83
72
60
47
96
99
81
70
58
45
79
56
43
54
75
53
31
148
145
143
279
150
148
145
142
139
137
257
150
145
142
139
136
133
130
235
144
139
136
133
130
127
123
214
138
132
129
126
123
119
115
192
132
126
122
118
114
110
105
170
Shut-off 873 ft
PSI
125
118
114
109
104
98
92
117
1108
103
97
91
84
76
107
96
90
83
75
66
55
95
82
73
64
53
42
80
62
52
40
Shut-off 1194 ft
HP
Discharge 3" NPT
43
SUBMERSIBLE PUMPS
High Head Filtered Effluent Pump
Applications:
n Filtered Effluent Service
n Aeration
n Ornamental Fountains
and Waterfalls
Features:
n Ideal for effluent pumping applications.
n Stainless steel or thermoplastic discharge and motor
bracket are tough and non-corrosive. Both materials
are highly resistant to damage by minerals, metals,
and other substances typically found in water.
n Heavy duty, 300V, 10' SJOOW motor leads.
n Ceramic bearing sleeve has time proven durability for
years of reliable service.
n Hex rubber bearing has extra large surface assuring
shaft stability and multiple flow channels keeping
particles away from bearing surfaces.
n Proven hydraulic staging allows close tolerances and
increased performance.
n Carbon phenolic up thrust washer prevents excessive
wear in severe applications.
n Removable built in check valve on 10-20 gpm pumps.
No built in check valve on high capacity pumps.
n Powered by Franklin Electric submersible motor.
44
SUBMERSIBLE PUMPS
Thermoplastic Units Ordering Information (See pgs. 2-3 for model number explanation)
4" Thermoplastic Units
GPM
10
20
HP
Volt
Wire
1/2
115
1/2
3/4
Ordering Info.
WT.
Model No.
Order No.
2
10WE05P4-2W115
94681005
25
230
2
10WE05P4-2W230
94681010
25
230
2
10WE07P4-2W230
94681015
29
1
230
2
10WE1P4-2W230
94681020
33
1.5
230
2
10WE15P4-2W230
94681025
41
1/2
115
2
20WE05P4-2W115
94682005
24
1/2
230
2
20WE05P4-2W230
94682010
24
3/4
230
2
20WE07P4-2W230
94682015
28
1
230
2
20WE1P4-2W230
94682020
31
1.5
230
2
20WE15P4-2W230
94682025
39
1/2 - 2 HP Pump Ends
GPM
HP
Volt
Wire
Model
Order No.
WT.
10
1/2
3/4
1
1.5
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
10WE05P4-PE
10WE07P4-PE
10WE1P4-PE
10WE15P4-PE
94691005
94691010
94691015
94691020
7
8
9
10
20
1/2
3/4
1
1.5
2
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
20WE05P4-PE
20WE07P4-PE
20WE1P4-PE
20WE15P4-PE
 20WE2P4-PE
94692005
94692010
94692015
94692020
94692025
6
6
7
8
9
Notes: Discharge is 1-1/4" NPT. Maximum diameter across cable guard is 3.90" on all models. All weights are in pounds.
45
SUBMERSIBLE PUMPS
200
180
FEET
METERS
650
1.5 hp
600
550
160
500
140
120
1 hp
450
400
350
3/4 hp
100
300
60
40
1/2 hp
250
200
150
25 FT
80
100
20
0
1 GPM
50
0
0
0.0
46
2
0.5
4
1.0
6
8
1.5
10
2.0
12
2.5
16 GPM
14
3.0
3.5
M3PH
SUBMERSIBLE PUMPS
0
20
30
40
3/4
50
60
70
80
Shut-off PSI
0
20
30
40
1
50
60
70
80
Shut-off PSI
0
20
30
40
1.5
50
60
70
80
Shut-off PSI
40
60
14
12
11
9
6
3
13
11
9
7
4
12
9
7
4
11
8
5
10
5
6
13
12
11
10
8
6
14
13
12
10
9
6
3
8
14
13
12
11
10
8
5
96
87
79
70
61
53
44
35
27
18
14
13
13
12
11
10
129
14
13
12
11
10
9
8
111
14
13
12
11
10
9
8
6
103
14
12
11
10
9
8
6
4
94
13
11
10
9
8
7
5
12
11
10
8
7
5
12
10
9
7
5
3
11
9
7
6
3
8
5
3
5
14
13
13
12
11
10
9
120
85
77
68
59
38
16
14
13
13
12
11
11
156
14
13
12
12
11
10
9
139
14
13
13
12
11
10
9
8
130
14
13
12
11
10
9
8
8
122
13
12
11
10
9
9
8
7
113
13
11
10
10
9
8
7
6
105
11
9
9
8
7
6
4
9
8
7
5
4
7
5
3
5
14
14
13
12
12
11
10
148
83
61
40
18
14
13
13
12
12
11
11
199
14
13
13
13
12
12
11
10
190
14
13
13
12
12
11
10
10
181
13
12
12
11
10
10
9
9
160
12
11
10
10
9
8
8
7
138
11
10
9
8
8
7
6
5
117
9
8
8
7
6
5
4
3
95
14
13
13
12
11
137
14
14
13
13
182
14
14
259
14
13
13
12
174
14
14
13
251
14
13
13
12
11
165
14
14
13
13
242
14
14
14
13
13
233
14
14
14
13
13
12
225
14
14
14
13
13
12
12
216
14
14
13
13
12
12
11
207
Shut-off 242 ft
20
Shut-off 337 ft
0
20
30
40
1/2
50
60
70
80
Shut-off PSI
80 100 120 140 160 180 200 250 300 350 400 450 500 550 600
Shut-off 441 ft
PSI
8
7
6
5
4
3
7
5
4
5
73
52
30
Shut-off 619 ft
HP
8
47
SUBMERSIBLE PUMPS
140
120
FEET
METERS
2 hp
450
400
1.5 hp
350
100
300
80
60
1 hp
250
3/4 hp
200
1/2 hp
150
40
10 FT
100
20
1 GPM
50
0
0
0
0.0
48
5
1.0
10
2.0
15
3.0
20
4.0
25
5.0
30
6.0
7.0
GPM
M3PH
SUBMERSIBLE PUMPS
74
0
20
30
40
50
60
70
80
Shut-off PSI
1.5
0
20
30
40
50
60
80
Shut-off PSI
2
Shut-off PSI
26
23
20
15
6
0
20
30
40
50
60
70
80
27
25
23
20
18
100
27
24
151
27
26
187
60
24
21
13
21
15
48
40
26
24
20
16
8
24
21
17
9
65
57
27
25
23
21
18
15
91
27
26
22
142
27
27
25
178
27
26
23
21
18
15
9
83
27
26
25
21
133
27
26
24
170
26
16
22
18
9
31
22
14
5
27
21
18
11
25
18
12
22
13
19
48
39
Shut-off 152 ft
40
15
7
Shut-off 191 ft
0
20
30
40
50
60
70
80
Shut-off PSI
1
24
20
12
57
Shut-off PSI
3/4
20
31
22
13
5
26
22
19
17
12
25
20
17
13
23
18
14
20
15
7
18
8
6
26
24
21
19
16
10
24
22
19
16
11
74
65
57
48
40
31
22
1
25
24
22
20
18
13
99
27
24
22
20
18
16
9
90
26
22
20
18
16
14
24
21
18
16
14
10
21
17
15
12
6
19
15
12
7
16
9
27
25
23
21
17
116
27
25
23
21
19
15
107
81
73
55
47
29
27
25
24
23
21
19
18
16
118
27
24
23
21
20
18
16
14
109
24
21
19
18
16
14
10
6
88
21
18
16
13
10
5
17
13
9
12
66
44
23
26
25
23
19
125
27
26
24
23
161
27
26
25
23
22
153
27
26
25
23
22
20
144
27
26
25
24
22
21
19
135
26
25
24
22
21
19
18
127
Shut-off 251 ft
1/2
0
20
30
40
50
60
70
80
80 100 120 140 160 180 200 250 300 350 400 450 500 550
Shut-off 368 ft
PSI
Shut-off 452 ft
HP
Discharge 3" NPT
49
SUBMERSIBLE PUMPS
Stainless Steel Units Ordering Information (See pgs. 2-3 for model number explanation)
GPM
35
45
60
90
HP
Volt
Wire
1/2
115
1/2
230
3/4
Ordering Info.
Order No.
2
35WE05S4-2W115
35WE05S4-2W230
230
2
35WE07S4-2W230
94683505
94683510
94683515
94683520
94683525
25
2
94684505
94684510
94684515
94684520
94684525
28
29
44
1
230
2
35WE1S4-2W230
1.5
230
2
35WE15S4-2W230
1/2
115
2
45WE05S4-2W115
1/2
230
2
45WE05S4-2W230
3/4
230
2
45WE07S4-2W230
1
230
2
45WE1S4-2W230
1.5
230
2
45WE15S4-2W230
1/2
115
2
60WE05S4-2W115
1/2
230
2
60WE05S4-2W230
3/4
230
2
60WE07S4-2W230
1
230
2
60WE1S4-2W230
1.5
230
2
60WE15S4-2W230
94686005
94686010
94686015
94686020
94686025
1.5
230
2
90WE15S4-2W230
94689025
Discharge tapping 2" FNPT with no built in check valve. Maximum diameter across cable guard is 3.90" on all models.
Notes: All weights are in pounds.
50
WT.
Model No.
25
29
33
39
28
33
36
44
29
33
37
45
SUBMERSIBLE PUMPS
Pump Ends Ordering Information (See pgs. 2-3 for model number explanation)
1/2 - 3 HP Pump Ends
GPM
35
45
60
90
HP
Ordering Info.
Model No.
Order No.
94693505
94693510
94693515
94693520
94693525
94693530
1/2
35WE05S4-PE
3/4
35WE07S4-PE
1
35WE1S4-PE
1.5
35WE15S4-PE
2
35WE2S4-PE
3
35WE3S4-PE
1/2
45WE05S4-PE
3/4
45WE07S4-PE
1
45WE1S4-PE
1.5
45WE15S4-PE
2
45WE2S4-PE
3
45WE3S4-PE
1/2
60WE05S4-PE
3/4
60WE07S4-PE
1
60WE1S4-PE
1.5
60WE15S4-PE
2
60WE2S4-PE
3
60WE3S4-PE
1.5
90WE15S4-PE
2
90WE2S4-PE
3
90WE3S4-PE
WT.
7
8
9
10
11
12
94694505
94694510
94694515
94694520
94694525
94694530
10
94696005
94696010
94696015
94696020
94696025
94696030
11
94699020
94699025
94699030
15
11
12
15
16
19
12
13
14
15
17
15
17
Discharge tapping 2" FNPT with no built in check valve. Maximum diameter across cable guard is 3.90" on all models.
51
SUBMERSIBLE PUMPS
120
FEET
METERS
3 hp
400
350
100
300
80
2 hp
250
1.5 hp
60
200
1 hp
150
40
100
25 FT
3/4 hp
1/2 hp
2.5 GPM
20
50
0
0
0
0
52
5
1
10
2
15
3
20
4
25
5
6
30
35
40
7
8
9
45
10
55 GPM
50
11
12
M3PH
SUBMERSIBLE PUMPS
40
0
10
20
30
40
50
60
Shut-off PSI
1.5
0
10
20
30
40
50
60
70
80
Shut-off PSI
2
0
10
20
30
40
50
60
70
80
Shut-off PSI
3
Shut-off PSI
0
10
20
30
40
50
60
70
80
43
37
30
24
14
65
45
41
37
32
28
23
16
89
44
42
38
35
31
27
116
44
43
40
38
163
30
11
15
21
12
3
42
35
25
36
27
11
28
14
32
Shut-off 88 ft
60
40
29
17
Shut-off 113 ft
42
33
24
40
23
14
6
44
39
32
26
17
40
33
26
19
34
27
20
28
21
22
11
13
57
48
39
31
22
13
5
45
42
38
33
28
24
17
42
38
34
29
24
18
43
39
34
30
25
19
40
35
30
26
20
10
36
31
26
21
12
31
27
22
13
27
23
15
23
16
81
72
63
55
46
37
29
20
11
45
42
39
36
32
28
24
20
99
45
43
40
36
32
29
25
21
14
90
43
40
37
33
29
25
21
15
41
37
33
30
26
22
16
38
34
30
26
22
17
34
31
27
23
18
10
31
27
24
19
11
28
24
20
12
19
11
81
73
64
55
47
38
16
45
44
42
39
36
34
31
28
128
45
44
42
39
37
34
31
28
26
119
44
42
40
37
34
32
29
26
23
111
42
40
38
35
32
29
26
23
19
102
40
38
35
32
30
27
24
20
15
94
38
36
33
30
27
24
21
15
32
29
27
24
20
14
26
23
19
13
18
12
85
63
42
20
43
38
31
25
16
45
42
39
35
31
28
24
107
45
43
41
38
35
154
45
43
41
38
36
33
145
45
43
41
39
36
33
30
137
Shut-off 171 ft
0
10
20
30
40
50
Shut-off PSI
1
38
27
29
Shut-off PSI
3/4
20
18
Shut-off 226 ft
1/2
0
10
20
30
40
50
80 100 120 140 160 180 200 250 300 350 400 450 500 550
Shut-off 288 ft
PSI
Shut-off 396 ft
HP
53
SUBMERSIBLE PUMPS
FEET
METERS
120
110
350
3 hp
100
90
300
80
2 hp
250
70
60
200
1.5 hp
1 hp
50
150
40
25 FT
30
3/4 hp
100
5 GPM
1/2 hp
20
50
10
0
0
0
0
54
10
2
20
4
30
6
40
8
50
10
60
12
14
GPM
M3PH
SUBMERSIBLE PUMPS
20
1
0
10
20
30
40
50
Shut-off PSI
1.5
0
10
20
30
40
50
60
Shut-off PSI
2
0
10
20
30
40
50
60
Shut-off PSI
3
Shut-off PSI
0
10
20
30
40
50
60
70
80
90
100
52
42
30
43
32
16
33
18
36
27
18
10
52
43
34
21
45
35
23
37
25
27
51
43
34
25
17
55
50
42
33
23
51
43
34
24
52
44
35
26
46
37
27
16
38
28
18
30
19
65
56
48
39
30
22
13
55
49
44
38
31
23
82
55
50
44
38
32
24
16
73
51
45
39
33
26
17
46
40
34
27
18
41
35
28
19
36
29
21
30
22
65
56
48
39
30
22
56
52
48
44
40
35
30
24
17
53
49
45
40
35
30
25
18
49
45
41
36
31
25
19
46
41
37
32
26
20
42
37
32
27
21
38
33
28
22
15
27
21
103
94
85
77
68
59
38
Shut-off 61 ft
36
49
41
31
17
60
55
49
41
32
22
74
53
48
42
36
99
54
50
46
42
37
32
27
137
9
51
42
32
20
54
49
43
37
30
91
54
51
47
42
38
33
27
21
129
55
51
47
43
38
33
28
22
16
120
55
52
48
44
39
34
29
23
16
111
21
Shut-off 122 ft
51
40
28
44
Shut-off PSI
80
Shut-off 158 ft
3/4
0
10
20
30
40
50
60
40
18
Shut-off PSI
40
21
Shut-off 190 ft
1/2
0
10
20
30
40
50
100 120 140 160 180 200 250 300 350 400 450 500 550
23
Shut-off 250 ft
PSI
Shut-off 337 ft
HP
55
SUBMERSIBLE PUMPS
FEET
METERS
90
275
3 hp
80
250
70
60
225
200
2 hp
175
50
1.5 hp
150
40
30
125
1 hp
100
3/4 hp
75
20
12.5 FT
1/2 hp
50
10
0
56
5 GPM
25
0
0
10
0
2
20
4
30
6
40
8
50
10
60
12
14
70
16
80
18
GPM
M3PH
SUBMERSIBLE PUMPS
0
10
20
30
40
50
0
10
20
30
40
50
Shut-off PSI
2
0
10
20
30
40
50
60
Shut-off PSI
3
Shut-off PSI
62
40
68
54
31
0
10
20
30
40
50
60
60
80
Shut-off 59 ft
8
41
Shut-off PSI
1.5
17
31
Shut-off PSI
1
44
64
43
47
22
14
70
56
35
58
39
42
32
23
15
69
59
47
24
61
49
27
51
31
34
30
21
13
66
56
43
28
57
45
30
47
32
34
21
41
32
24
15
70
64
58
50
41
29
65
59
51
42
31
60
52
43
33
20
53
45
34
22
46
36
24
37
25
72
63
54
46
37
28
Shut-off 92 ft
3/4
0
10
20
30
40
50
40
68
39
66
57
42
67
58
44
20
56
47
39
72
64
53
39
24
65
54
41
26
67
58
50
69
63
56
48
38
89
70
64
57
49
39
28
80
71
62
51
37
22
76
67
61
54
106
68
62
55
46
98
Shut-off 114 ft
Shut-off PSI
20
Shut-off 149 ft
1/2
0
10
20
30
40
50
100 120 140 160 180 200 250 300 350 400 450 500 550
Shut-off 195 ft
PSI
Shut-off 265 ft
HP
57
SUBMERSIBLE PUMPS
FEET
METERS
60
180
3 hp
50
160
140
40
2 hp
120
30
100
1.5 hp
80
60
10 FT
20
40
10
10 GPM
20
0
0
0
0
58
20
2
4
40
6
8
10
60
12
14
80
16
18
100
20
22
GPM
120
24
26
28
30
M3PH
SUBMERSIBLE PUMPS
Shut-off PSI
2
0
10
20
30
40
50
Shut-off PSI
3
Shut-off PSI
0
10
20
30
40
50
20
40
60
80
69
38
43
94
61
99
65
32
32
24
15
6
112
88
61
34
91
65
39
68
43
47
109
84
58
44
35
26
18
9
96
77
59
38
79
61
42
64
45
106
88
69
52
64
110
93
74
57
34
48
108
91
72
54
30
55
46
38
29
20
12
Shut-off 95 ft
1.5
0
10
20
30
40
50
100 120 140 160 180 200 250 300 350 400 450 500 550
Shut-off 121 ft
PSI
Shut-off 167 ft
HP
59
SUBMERSIBLE PUMPS
Submersible Pump Accessories
Ordering Information
Check Valves
Reducer Bushing
Poppet
T-Handle Poppet Wrench
Check Valves - Silicone Bronze
Description
Inlet
Outlet
Case Qty.
Order No.
Wt.
Flomatic™ 4221LEB
1-1/4" MNPT
1" FNPT
36
91980631
1.25
Flomatic™ 4242LEB
1-1/4" MNPT
1-1/4" FNPT
36
91980649
1.75
Check Valves - Stainless Steel
Description
Inlet
Outlet
Case Qty.
Order No.
Wt.
Flomatic™ 4221LSS2
1-1/4" MNPT
1" FNPT
49
91985317
1.4
Flomatic™ 4242SS2
1-1/4" MNPT
1-1/4" FNPT
49
91985309
1.5
Description
Inlet
Outlet
Carton Qty.
Order No.
Wt.
Simmons #658SB
2" MNPT
2" FNPT
1
91982157
3.5
Simmons #660SB
3" MNPT
3" FNPT
1
91981266
10
Simmons #661SB
4" MNPT
4" FNPT
1
91980334
21
Description
Order No.
Wt.
Flomatic™ Poppet with Removable Ring (Patent Pending)
91985259R
0.1
T-Handle Poppet Wrench
23498207
1
Check Valves - Ductile Iron
Flomatic™ Poppet with Removable Ring (Patent Pending)
Reducer Bushing
Description
Inlet
Outlet
PSI Rating
Order No.
Wt.
White PVC Bushing
1-1/4" MNPT
1" FNPT
200 PSI
31031008R
0.2
Notes: Flomatic™ is a trademark of the Danfoss Corporation. All weights are in pounds.
60
NON-SUBMERSIBLE PUMPS
WJS Series
Shallow Well Jet Pumps
Features:
n Cast iron casing and seal plate ensures durability
and long life.
n Precision engineered thermoplastic impeller, diffuser,
nozzle and venturi.
NRTL/C
CSA108
UL778
n A.O. Smith higher than standard Nema service factor
dual compartment motors.
1¼" NPT Suction
Priming Plug
½" NPT
n Dual voltage (115/230) stainless steel motor shaft, dual
ball bearing.
I
n Dual adjustment pressure switch preset at 30-50 psi for
today’s modern living conditions.
Gauge Tapping
¼" NPT
n Mechanical seal ensures years of leak free operation.
n Fully serviceable with two year over the counter warranty.
G
n Clean out plug to easily unclog nozzle.
H
Nozzle
Cleanout
¼" NPT
n Pressure gauge included on all models.
F
E
Air Volume
Control Tapping
¼" NPT
D
1" NPT Discharge
Drain Plug ¼" NPT
A
C
B
Dimensional Data
Series
HP
A
B
C
D
E
F
G
H
I
WJS05CI
1/2
9-3/8
17-5/16
3
6
9
4-55/64
8-29/32
4
3.5
WJS07CI
3/4
9-3/8
17-5/16
3
6
9
4-55/64
8-29/32
4
3.5
WJS1CI
1
9-3/8
17-5/16
3
6
9
4-55/64
8-29/32
4
3.5
WJS05CI-H
1/2
9-3/8
17-5/16
3
6
9
4-55/64
8-29/32
4
3.5
Notes: All lengths are in inches. All weights are in pounds. H = High Head
61
WJS Series
Model
HP
Suction x Discharge
Voltage
WJS05CI
WJS07CI
WJS1CI
WJS05CI-H
1/2
3/4
1
1/2
1-1/4” x 1”
1-1/4” x 1”
1-1/4” x 1”
1-1/4” x 1”
115/230
115/230
115/230
115/230
Pump Unit
Order No.
91360005
91360007
91360010
91361005
Wt.
36
37
38
36
Performance Charts
HPZ
1/2
3/4
1
1/2
High
Pressure
Total
Suction
Lift Ft.
Discharge Pressure - PSI
20
25
30
35
40
5
12.8
12.5
12.3
12.1
11.2
9.5
6.9
10
11.5
11.3
11.0
10.8
10.4
8.5
6.0
60
65
70
75
80
4.3
2.0
-
-
-
-
64.2
3.4
1.0
-
-
-
-
62.0
15
9.8
9.7
9.6
9.5
9.4
7.3
4.7
2.2
-
-
-
-
-
59.9
20
8.3
8.1
7.8
7.7
7.6
5.7
3.5
1.0
-
-
-
-
-
57.7
25
5.6
5.55
5.5
5.4
5.3
4.1
2.3
0.2
-
-
-
-
-
55.5
5
16.2
16.0
15.8
15.6
15.4
12.1
8.7
5.7
2.9
-
-
-
-
65.0
10
14.3
14.0
13.7
13.5
13.2
10.6
7.6
4.6
1.6
-
-
-
-
62.8
15
12.1
11.7
11.3
11.0
10.6
9.3
6.3
3.2
0.2
-
-
-
-
60.6
20
9.9
9.6
9.3
9.0
8.7
7.8
4.8
1.9
-
-
-
-
-
58.5
25
7.2
7.1
7.0
6.9
6.8
6.7
3.5
0.6
-
-
-
-
-
56.3
5
24.8
24.7
23.2
19.8
16.5
13.1
9.5
6.3
3.4
0.5
-
-
-
66.2
10
21.5
21.2
20.1
18.4
15.2
11.5
7.9
4.9
2.4
-
-
-
-
64.2
15
18.1
17.8
17.4
16.7
13.8
10.3
6.9
4.0
1.3
-
-
-
-
62.1
20
14.4
14.3
14.2
14.6
12.3
9.0
5.3
2.3
0.2
-
-
-
-
60.1
25
10.5
10.5
10.4
10.3
8.8
7.0
4.2
1.3
-
-
-
-
-
57.2
5
8.8
8.9
8.6
8.4
8.3
8.1
7.4
6.0
4.7
3.4
2.2
1.2
0.15
80.6
10
7.8
7.7
7.55
7.4
7.25
7.2
6.6
5.4
4.15
2.8
1.8
0.7
-
78.5
15
6.5
6.4
6.3
6.2
6.1
6.0
5.3
4.8
3.6
2.3
1.3
0.3
-
76.3
20
5.3
5.2
5.1
4.9
4.8
4.7
4.6
4.1
2.9
1.7
0.7
-
-
74.1
25
3.7
3.65
3.6
3.55
3.5
3.5
3.45
2.4
2.3
1.3
0.3
-
-
71.9
Notes: All lengths are in inches. All weights are in pounds.
62
45
50
55
Gallons per minute
Shut-off
Pressure
PSI
WJS Series
METERS
FEET
Performance Curves
60
200
180
50
160
140
40
120
30
100
80
20
1/2 hp
High Head
60
3/4 hp
1 hp
1/2 hp
40
10
20
0
0
0
0
10
2
20
4
GPM
30
6
8
M3PH
63
WJC Series
Convertible Jet Pumps
Features:
n Cast iron casing and seal plate ensures durability
and long life.
n Precision engineered thermoplastic impeller, diffuser,
nozzle and venturi.
CSA ENC 3
COF CSA 3
C
n A.O. Smith higher than standard Nema service factor
dual compartment motors.
n Dual voltage (115/230) stainless steel motor shaft, dual
ball bearing.
US
LR 80980
n Dual adjustment pressure switch preset at 30-50 psi for
today’s modern living conditions.
n Mechanical seal ensures years of leak free operation.
n Clean out plug to easily unclog nozzle.
n Pressure gauge included on all models.
G
E
A
B
E
Dimensional Data
Series
HP
A
B
C
D
E
WJC05CI
1/2
5.38
18.78
9.0
10.0
4.3
WJC07CI
3/4
5.38
19.58
9.0
10.0
4.3
WJC1CI
1
5.38
20.58
9.0
10.0
4.3
Notes: Dimensions will vary according to motor manufacturer.
64
Pump Unit
Order No.
Model
HP
Suction x
Discharge
Voltage
WJC05CI-C
WJC07CI-C
WJC1CI-C
WJC05 INJ KIT
WJC07/1 INJ KIT
1/2
1-1/4” x 1”
115/230
91370005
36
3/4
1-1/4” x 1”
115/230
91370007
37
1
1-1/4” x 1”
115/230
91370010
38
1/2
-
-
91370001
7
3/4 - 1
-
-
91370002
7
Wt.
WJC Series
Performance Charts
HP
Configuration
Total
Suction
Lift Ft.
20
5
11.1
11.0
10.9
10.8
10.7
9.2
Shallow
15
8.1
8.0
7.9
7.8
7.7
7.3
25
4.8
4.8
4.7
4.7
4.6
4.5
1/2
Deep
Shallow
3/4
Deep
Shallow
1
Deep
25
30
35
40
45
55
60
Shut-off
Pressure
PSI
7.4
5.9
4.5
76.2
5.9
4.4
3.1
71.7
4.4
3.2
1.9
67.5
50
Gallons per minute
20
-
10.7
9.2
7.8
6.5
5.4
4.5
3.6
2.9
85.0
50
-
6.8
5.8
4.8
4.0
3.2
2.4
1.8
1.3
72.0
80
-
4.1
3.4
2.8
2.2
1.6
1.0
0.4
-
59.0
5
18.2
17.9
17.7
16.6
14.3
12.0
9.7
7.4
5.1
71.0
15
12.7
12.5
12.4
12.2
12.0
9.9
7.5
5.3
3.0
66.7
25
7.7
7.5
7.4
7.1
6.9
6.7
5.0
3.0
1.0
62.4
20
-
11.5
9.8
7.6
6.8
5.7
4.7
3.8
3.0
86.0
50
-
7.4
6.1
5.1
4.1
3.3
2.5
1.9
1.3
73.0
90
-
4.5
3.5
2.8
2.1
1.5
1.0
0.5
-
60.0
5
20.2
20.1
19.9
19.5
16.7
13.9
11.1
8.3
5.6
71.0
15
14.5
14.3
14.1
13.8
13.6
11.4
8.7
6.0
3.3
66.7
25
9.1
8.9
8.8
8.7
8.6
8.5
6.0
3.6
1.2
62.1
20
-
12.8
10.5
8.7
7.3
6.6
5.2
4.4
3.6
87.0
50
-
8.4
7.2
6.0
5.0
4.2
3.4
2.6
1.9
74.0
90
-
4.3
3.4
2.7
1.9
1.8
0.7
-
-
56.7
65
Jet Pump Accessories
Accessory Description
Order No.
Wt.
4-in-1 Foot Valve, 3/4” - 1-1/2”
21339
1
Cast Iron Horizontal Check Valve, Poppet Type
Bronze, 1-1/4” F x 1-1/4” M
91980680
4
Horizontal Check Valve
Description
Global Series
Furnas Pro Series
4-in-1 Foot Valve
Pressure Switches
PSI Setting
Order No.
Wt.
20/40
PRSW2040
1
30/50
PRSW3050
1
40/60
PRSW4060
1
20/40
69ES1AZ2040
1
30/50
69ES1AZ3050
1
40/60
69ES1AZ4060
1
Pressure Gauge, 0 - 100 psi, 1/4” b.m.
9193-4018
1
External Control Valve
9198-2538
2
Furnas Pressure Switch
66
Global Pressure Switch
Pressure Gauge
AQ80
Features:
n Constant pressure at flow rates of 1/2 gpm or higher,
eliminating the annoying pressure fluctuations common with
pump/tank systems.
n Pump runs continuously while service is needed, eliminating
short cycling, the major cause of motor wear and failure.
n Handles flow rates up to 20 gpm. For flow rates above 20 gpm,
AquaGenies may be connected in parallel to handle each 20
gpm increment.
n Retrofit to any existing pump and pressure tank system.
Components of Jet Pump Installation
Shown left is an example of a shallow
well application for your jet pump with
the constant pressure valve. Your
installation may be slightly different but
the application is basically the same.
Consult your dealer for assistance with
your particular application.
WATER SUPPLY
AQ80
Works at any flow rate above 1/2 gpm. Provides constant pressure at each specific flow rate
delivered by the pump. (Pressure will be slightly different for each flow rate.) A pressure tank
is recommended for optimum performance. Maximum operating pressure: 80 psi. (If installed
with a submersible pump that develops more than 80 psi at the inlet of the AQ80, use a pressure regulator to protect the AquaGenie from excessive pressure.)
Model
Preset Outlet
Pressure
Inlet
Outlet
Tank
Connection
Max. Inlet
Pressure
Order No.
Wt.
AQ80
None
1”
1”
1”
80 psi
91987321
2
67
Air Charger Kit
Features:
n Specifically designed to prevent water-logging typically associated
with a conventional galvanized pressure tank.
n Automatically maintains a proper balance of air and water volume
in the tank.
n Eliminates frequent starts and stops, thus extending motor life and
reducing power consumption.
n Eliminates tank draining normally required with water-logged tanks.
n Eliminates need for other costly equipment.
n Unit consists of air charger, reducer bushing, adapter nut,
1/4" polyethylene tubing and male connector.
Model
Ordering No.
Wt.
Air Charger
106594901
2
68
WSP Series
Self-Priming Sprinkler Pumps
Features:
n Reliable standard 5/8" rotating mechanical shaft seal.
n Precision molded glass-filled thermoplastic impeller.
Extra smooth for high efficiency and durability.
n Rugged pump case constructed with heavy-duty
cast iron ensures optimum durability, quiet operation,
and long life.
NRTL/C
CSA108
UL778
n Glass-filled thermoplastic replaceable diffuser can
be serviced easily and inexpensively to maintain
pump efficiency.
n Industry proven single phase motors are dual voltage,
set to run with either 115 or 230 V incoming power.
9.63”
2.00”
n Built-in drain plug for easy winterizing and servicing.
n Integral priming plug to facilitate rapid priming.
n 2" NPT suction, 1.5" NPT discharge.
2.59”
2.59”
Dimensional Data
2.95”
2.69”
10.03”
4.84”
HP
A
3/4
10.88
1
11.88
1.5
12.63
2
12.65
7.63”
Model
HP
Suction x
Discharge
Voltage
WSP07CI
3/4
2" x 1.5"
115/230
91380007
64
WSP1CI
1
2" x 1.5"
115/230
91380010
66
WSP15CI
1-1/2
2" x 1.5"
115/230
91380015
72
WSP2CI
2
2" x 1.5"
115/230
91380020
76
WSP2CI-H
2
2" x 1.5"
115/230
91381020
76
Pump Unit
Order No.
Wt.
69
WSP Series
40
FEET
METERS
Performance Curves and Charts
120
30
2 hp
100
1.5 hp
80
1 hp
20
60
3/4 hp
40
10
20
0
0
0
0
Model
3/4
1
1.5
2
2
20
2
6
8
60
10
12
20
30
Gallons per Minute
Suction
Lift Ft.
10
5
5
5
5
63
72
90
97
52
62
80
90
5
97
90
Notes: All lengths are in inches.
70
4
40
14
80
16
18
40
Shut-Off
Pressure
PSI
40
46
64
74
12
20
40
47
45
46
47
48
74
47
48
100
20
22
GPM
24
M3PH
WCE Series
End Suction Centrifugal Pumps
Features:
n Standard Buna with carbon ceramic mechanical seal.
n Enclosed glass filled Noryl® impeller with reinforced SS hub.
n Shaft flinger combined with large drain hole in adapter
prevents moisture from damaging bearings.
n 3600 RPM, single-phase square flange drip-proof motor
for easy service and reliability.
n Heavy duty cast gray iron, thick wall.
n Ports for air bleeding when priming for draining to
prevent frost damage.
NRTL/C
CSA108
UL778
E
SUCTION
D
DISCHARGE
F
G
H
7/16”
15/16”
3”
MOUNT
SURFACE
4.88”
B
C
3”
A
Dimensional Data
HP
Suct.
(NPT)
Disch.
(NPT)
A
B
C
D
E
F
G
H
1/2
3/4
1
1.5
2
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1.5"
1"
1"
1"
1"
1-1/4"
13-3/4"
14-5/64"
15-37/64"
15-29/32"
15-53/64"
2-5/8"
2-5/8"
2-5/8"
2-5/8"
2-7/8"
5-17/32"
5-17/32"
5-17/32"
5-17/32"
5-7/8"
4"
4"
4"
4"
4-23/32"
3-11/16"
3-11/16"
3-11/16"
3-11/16"
4-1/8"
4-29/32"
4-29/32"
4-29/32"
4-29/32"
6-5/16"
8-29/32"
8-29/32"
8-29/32"
8-29/32"
10-25/32"
4"
4"
4"
4"
4-15/32"
Suction x
Discharge
HP
WCE05CI
1/2
115/230
91390005
31
WCE07CI
3/4
115/230
91390007
32
WCE1CI
1
115/230
91390010
37
WCE15CI
1.5
115/230
91390015
42
WCE2CI
2
115/230
91390020
46
1-1/4" x 1"
1.5" x 1-1/4"
Voltage
Pump Unit
Order No.
Model No.
Wt.
71
WCE Series
45
FEET
METERS
Performance Curves and Charts
140
40
2 hp
120
1.5 hp
1 hp
30
100
3/4 hp
80 1/2 hp
20
60
40
10
20
0
0
0
0
HP
20
2
Suction x
Discharge
6
8
60
10
20
30
40
12
14
80
16
100
18
20
Capacities GPM
Total Head in Ft
50
60
70
22
GPM
24 M3PH
80
100
120
1/2
1-1/4" x 1"
46
38
32
24
115
-
-
-
-
3/4
1-1/4" x 1"
55
52
47
38
32
25
15
-
-
1
1-1/4" x 1"
60
57
54
49
44
39
32
12
-
1.5
1-1/4" x 1"
67
65
63
59
54
49
39
24
-
2
1.5" x 1-1/4"
104
97
92
88
81
75
66
48
15
Notes: All lengths are in inches.
72
4
40
MH Series
Horizontal Multi-Stage Centrifugal Pumps
The new Water Horse MH Series, Multi-Stage Booster
Pump is designed to meet your pressure boosting
needs. The stainless steel construction offers high
performance in a wide variety of applications. The MH
Series is offered in three flow rates and five different
horsepower sizes in 1-phase or 3-phase to make sure
you can have the right pump to fit your application.
Features:
n All 300 Series Stainless Steel wetted components
Applications:
n High Service Factor A.O. Smith motors
n
Pressure Boosting
n Available in 3 flow rates: 15, 30 and 45 gpm
n
Water Transfer
n 5 motor hp size options
n Turf Irrigation
n High pressure capabilities – 140 psi
n Residential Lawn Sprinkler Systems
n Able to pump fluids at temperatures up to 225 °F
n Wash Down Applications
n Can operate in suction lift installation up to 10 feet
n Commercial Water Features
n Certified for indoor and outdoor use
nFountains
nCisterns
C
4.0”
8.0”
A
2.0”
4.9”
B
7.0”
Single-Phase Dimensional Data
Three-Phase Dimensional Data
GPM
Stage
A
B
C
GPM
Stage
A
B
C
15
2
3
4
5
6
4.06
4.06
5.00
5.94
6.89
8.75
8.75
9.69
10.64
11.58
16.75
17.50
19.07
20.81
22.59
15
2
3
4
5
6
4.06
4.06
5.00
5.94
6.89
8.75
8.75
9.69
10.64
11.58
16.97
17.62
18.92
20.78
22.56
30
2
3
4
5
4.06
4.06
5.00
5.94
8.75
8.75
9.69
10.64
17.50
19.00
20.70
21.64
30
2
3
4
5
4.06
4.06
5.00
5.94
8.75
8.75
9.69
10.64
17.62
18.85
20.67
21.61
45
2
3
4.65
4.65
9.34
9.34
19.64
20.47
2
4.65
9.34
19.67
3
4.65
9.34
20.50
Note: Dimensions will vary according to motor manufacturer.
45
73
MH Series
Single-Phase
GPM
15
30
45
Suction x
Discharge
1-1/4" x 1"
1-1/4" x 1"
1-1/2" x 1-1/4"
HP
Stage
Voltage
Model No.
Order No.
Wt.
0.5
2
115/230
15WMH05S2
96081500
22
0.75
3
115/230
15WMH07S3
96081501
25
1
4
115/230
15WMH1S4
96081502
29
1.5
5
115/230
15WMH15S5
96081503
35
2
6
115/230
15WMH2S6
96081504
40
0.75
2
115/230
30WMH07S2
96083000
25
1
3
115/230
30WMH1S3
96083001
33
1.5
4
115/230
30WMH15S4
96083002
37
2
5
115/230
30WMH2S5
96083003
41
1.5
2
115/230
45WMH15S2
96084500
33
2
3
115/230
45WMH2S3
96084501
39
HP
Stage
Voltage
Model No.
Order No.
Wt.
Note: Weight in pounds.
Three-Phase
GPM
15
30
45
Suction x
Discharge
1-1/4" x 1"
1-1/4" x 1"
1-1/2" x 1-1/4"
Note: Weight in pounds.
74
0.5
2
208-230/460
15WMH05S2-T
96081510
24
0.75
3
208-230/460
15WMH07S3-T
96081511
24
1
4
208-230/460
15WMH1S4-T
96081512
29
1.5
5
208-230/460
15WMH15S5-T
96081513
34
2
6
208-230/460
15WMH2S6-T
96081514
42
0.75
2
208-230/460
30WMH07S2-T
96083010
24
1
3
208-230/460
30WMH1S3-T
96083011
33
1.5
4
208-230/460
30WMH15S4-T
96083012
36
2
5
208-230/460
30WMH2S5-T
96083013
43
1.5
2
208-230/460
45WMH15S2-T
96084510
32
2
3
208-230/460
45WMH2S3-T
96084511
41
MH Series
15 gpm Performance
8 GPM - 25 GPM OPERATING RANGE
350
30
20
300
15
NPSHR
25
2 hp
10
1.5 hp
HEAD - FEET
250
1 hp
200
3/4 hp
150
1/2 hp
10 FT
100
50
1.0 GPM
0
0
5
10
15
20
25
30
FLOW - GPM
HP
1/2
3/4
1
1.5
2
50
60
70
80
21
18
15
12
25
Capacities - GPM
Shut
Off
Total Head - Feet
Head
90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 (PSI)
8
1
44
23
21
19
18
16
14
12
9
6
1
26
25
24
23
21
20
18
17
15
14
12
10
8
5
1
66
27
26
25
25
24
23
22
21
20
19
18
16
15
14
12
10
9
6
4
27
26
25
25
24
23
22
21
21
20
19
18
17
16
15
14
12
88
111
11
10
135
75
MH Series
30 gpm Performance
300
30
2 hp
20
NPSHR
25
15
250
1.5 hp
HEAD - FEET
200
150
10 FT
100
50
1.0 GPM
0
0
5
10
15
20
25
30
35
40
45
50
FLOW - GPM
50
60
70
80
Capacities - GPM
Shut Off
Total Head - Feet
Head
(PSI)
90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240
37
33
30
25
19
10
43
41
40
37
35
32
29
26
22
17
11
44
43
42
41
39
38
36
35
33
31
28
26
23
19
15
10
3
44
44
43
42
41
40
39
38
37
35
34
32
30
28
26
24
HP
3/4
1
1.5
2
76
47
69
93
21
18
15
116
MH Series
45 gpm Performance
250
30
20
15
200
NPSHR
25
10
HEAD - FEET
2 hp
150
1.5 hp
10 FT
100
50
2.0 GPM
0
0
10
20
30
40
50
60
70
FLOW - GPM
HP
1.5
2
Capacities - GPM
Total Head - Feet
100
110
120
60
70
80
90
64
59
52
43
26
62
58
130
140
150
160
42
33
22
9
Shut Off
Head
(PSI)
47
54
48
71
77
WHB Series
Horizontal Booster Pumps
Cast Iron Features:
n Designed for boosting water pressure from a variety of
sources including municipal and private water systems.
n Stainless steel discharge head on all models.
n Cast iron motor bracket with a rugged support foot for
horizontal or vertical mounting, and a handle for portability
of the unit.
n 1-1/4” suction and 1” discharge are the same across the
entire line, simplifying installation and maintenance.
Applications:
n Boosting water pressure from either city
mains or private water systems.
n Pressure washing buildings and floors.
n Poultry houses.
n Spray cooling equipment.
n Lawn and crop irrigation.
n Evaporative cooling system/misters.
n Water circulation.
n General purpose pumping.
n Reverse osmosis - stainless steel WHB.
n Filtration - stainless steel WHB.
n The booster pump is built by Franklin Electric’s Patented
(U.S. Patent 7,290,984) Tri-Seal floating stage system, for
maximum efficiency, longevity, and performance.
n Assembled with the highest quality materials of
construction, such as Celcon® for impellers, Noryl® for
the diffusers, and 300 Series stainless steel for the hub,
eye seals, shaft and shell.
n Easily serviced through a back pull-out design, which
leaves all plumbing and the pump undisturbed in their
original location.
n Industry proven square flange motors from A.O. Smith.
n 1/2 through 2 hp motors are dual voltage, set to run with
either 115V or 230V incoming power; while 3 hp are 230V.
n Shut-off pressures up to 270 PSI, flow rates from 5 to 25
gpm, and temperatures up to 120 °F (49 °C).
Stainless Steel Features:
Include all of the Cast Iron features above plus:
n Stainless steel models industrial applications:
CSA ENC 3
COF CSA 3
C
US
LR 80980
Notes: 3 hp WHB pumps are for indoor
installations only. They are not rated for
outdoor installations.
78
Viton ® mechanical seal
●● 1/3 through 3 hp high service factor A.O. Smith motors.
●●
n Stainless steel motor bracket with a rugged support foot
for horizontal or vertical mounting, and a handle for
portability of the unit.
Celcon ® is a registered trademark of the Celanese Corporation.
Viton ® is a registered trademark of Dupont Dow Elastomers.
WHB Series
Stainless Steel (With Viton® mechincal seal and high service factor A.zO. Smith motor)
GPM
HP
Suction x
Discharge
Voltage
5
1/3
1/2
3/4
1
1" x 1"
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
115/230
7
1/2
3/4
1
1.5
1" x 1"
1" x 1"
1" x 1"
1" x 1"
10
1/2
3/4
1
1.5
2
15
20
Model No.
Order No.
Wt.
5WHBT03S4
5WHBT05S4
5WHBT07S4
5WHBT1S4
95900505
95900510
95900515
95900520
33
37
41
46
115/230
115/230
115/230
115/230
7WHBT05S4
7WHBT07S4
7WHBT1S4
7WHBT15S4
95900710
95900715
95900720
95900725
37
40
46
53
1" x 1"
1" x 1"
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
115/230
115/230
10WHBT05S4
10WHBT07S4
10WHBT1S4
10WHBT15S4
10WHBT2S4
95901010
95901015
95901020
95901025
95901030
37
39
45
52
56
3/4
1
1.5
2
1" x 1"
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
115/230
15WHBT07S4
15WHBT1S4
15WHBT15S4
15WHBT2S4
95901515
95901520
95901525
95901530
39
44
49
55
3/4
1
1.5
2
3
1" x 1"
1" x 1"
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
115/230
230
20WHBT07S4
20WHBT1S4
20WHBT15S4
20WHBT2S4
20WHBT3S4
95902015
95902020
95902025
95902030
95902035
39
44
51
55
67
1
1" x 1"
115/230
1.5
1" x 1"
115/230
25
2
1" x 1"
115/230
3
1" x 1"
230
Viton ® is a registered trademark of Dupont Dow Elastomers.
25WHBT1S4
25WHBT15S4
25WHBT2S4
25WHBT3S4
95902520
95902525
95902530
95902535
44
48
54
66
Cast Iron
GPM
HP
Suction x
Discharge
Voltage
Order No.
Wt.
5
1/2
3/4
1
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
5WHBT05C4
5WHBT07C4
5WHBT1C4
95910505
95910510
95910515
36
40
43
7
1/2
3/4
1
1.5
1" x 1"
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
115/230
7WHBT05C4
7WHBT07C4
7WHBT1C4
7WHBT15C4
95910705
95910710
95910715
95910720
36
40
43
48
10
1/2
3/4
1
1.5
2
1" x 1"
1" x 1"
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
115/230
115/230
10WHBT05C4
10WHBT07C4
10WHBT1C4
10WHBT15C4
10WHBT2C4
95911005
95911010
95911015
95911020
95911025
35
39
42
48
55
15
3/4
1
1.5
2
1" x 1"
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
115/230
15WHBT07C4
15WHBT1C4
15WHBT15C4
15WHBT2C4
95911510
95911515
95911520
95911525
39
41
47
52
20
3/4
1
1.5
2
3
1" x 1"
1" x 1"
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
115/230
230
20WHBT07C4
20WHBT1C4
20WHBT15C4
20WHBT2C4
20WHBT3C4
95912010
95912015
95912020
95912025
95912035
39
41
47
54
70
25
1
1.5
2
3
1" x 1"
1" x 1"
1" x 1"
1" x 1"
115/230
115/230
115/230
230
25WHBT1C4
95912515
41
25WHBT15C4
95912520
46
25WHBT2C4
95912525
51
25WHBT3C4
95912535
69
Model No.
79
WHB Series
FEET
METERS
700
200
180
5WHBT1S4 (1 hp)
600
160
500
5WHBT07S4 (3/4 hp)
5WHBT1C4 (1 hp)
140
120
400
5WHBT05S4 (1/2 hp)
5WHBT07C4 (3/4 hp)
100
300
5WHBT03S4 (1/3 hp)
5WHBT05C4 (1/2 hp)
60
50 FT
80
200
0.5 GPM
40
100
20
0
0
0
1
0
0.2
2
0.4
3
0.6
4
0.8
Stainless Steel Models
80
5
1.0
6
1.2
1.4
Cast Iron Models
7
1.6
8 GPM
1.8 M3PH
WHB Series
240
220
FEET
METERS
800
7WHBT15S4 (1.5 hp)
700
200
180
600
7WHBT1S4 (1 hp)
7WHBT15C4 (1.5 hp)
160
500
140
7WHBT07S4 (3/4 hp)
7WHBT1C4 (1 hp)
400
7WHBT05S4 (1/2 hp)
7WHBT07C4 (3/4 hp)
100
300
80
60
7WHBT05C4 (1/2 hp)
50 FT
120
200
0.5 GPM
40
100
20
0
0
0
0
1
2
0.5
3
4
5
1.0
6
7
1.5
8
9
2.0
10
11 GPM
M3PH
Cast Iron Models
81
WHB Series
240
220
FEET
METERS
800
700
10WHBT2S4 (2 hp)
200
180
600
10WHBT15S4 (1.5 hp)
10WHBT2C4 (2 hp)
160
500
140
120
10WHBT1S4 (1 hp)
10WHBT15C4 (1.5 hp)
400
100
10WHBT07S4 (3/4 hp)
10WHBT1C4 (1 hp)
300
60
50 FT
80
10WHBT05S4 (1/2 hp)
10WHBT07C4 (3/4 hp)
200
1 GPM
10WHBT05C4 (1/2 hp)
40
100
20
0
0
0
2
0
0.5
4
1.0
6
8
1.5
82
10
2.0
12
2.5
Cast Iron Models
14
3.0
16 GPM
3.5
M3PH
WHB Series
FEET
METERS
700
200
180
15WHBT2S4 (2 hp)
600
160
500
15WHBT15S4 (1.5 hp)
15WHBT2C4 (2 hp)
140
400
100
15WHBT1S4 (1 hp)
15WHBT15C4 (1.5 hp)
300
80
60
15WHBT07S4 (3/4 hp)
15WHBT1C4 (1 hp)
50 FT
120
200
1 GPM
15WHBT07C4 (3/4)
40
100
20
0
0
0
0
2
4
1.0
6
8
10
12
2.0
14
3.0
16
18
4.0
20
22
GPM
5.0
M3PH
Cast Iron Models
83
WHB Series
180
FEET
METERS
600
20WHBT3S4 (3 hp)
20WHBT3C4 (3 hp)
160
500
140
20WHBT2S4 (2 hp)
120
400
20WHBT15S4 (1.5 hp)
20WHBT2C4 (2 hp)
100
300
80
60
200
50 FT
20WHBT1S4 (1 hp)
20WHBT15C4 (1.5 hp)
20WHBT07S4 (3/4 hp)
20WHBT1C4 (1 hp)
40
2.5 GPM
20WHBT07C4 (3/4 hp)
100
20
0
0
0
0
5
1
10
2
15
3
84
20
4
25
5
Cast Iron Models
30
6
7
GPM
M3PH
WHB Series
FEET
METERS
500
140
120
25WHBT3S4 (3 hp)
25WHBT3C4 (3 hp)
400
25WHBT2S4 (2 hp)
100
25WHBT15S4 (1.5 hp)
25WHBT2C4 (2 hp)
300
80
25WHBT1S4 (1 hp)
25WHBT15C 4 (1.5 hp)
200
50 FT
60
25WHBT1C4 (1 hp)
2.5 GPM
40
100
20
0
0
0
0
5
10
2
15
20
4
25
30
6
35
40 GPM
8
M3PH
Cast Iron Models
85
WHB Series
6.54
4.04
Dimensional Data
B
9.04
A
C
3.27
3.77
6.50
1.75
Cast Iron
Stainless Steel
GPM
HP
Stage
A
B
C
5
1/2
3/4
1
7
9
12
9.63”
10.38”
11.00”
13.49”
15.14”
17.60”
23.12”
25.52”
28.60”
7
1/2
3/4
1
1.5
6
8
10
14
9.63”
10.38”
11.00”
11.88”
12.67”
14.31”
15.96”
19.24”
22.30”
24.69”
26.96”
31.12”
10
1/2
3/4
1
1.5
2.0
5
7
8
11
15
9.63”
10.38”
11.00”
11.88”
12.63”
12.27”
14.07”
14.98”
17.69”
21.31”
21.90”
24.45”
25.98”
29.57”
33.94”
15
3/4
1
1.5
2.0
5
6
8
12
10.38”
11.00”
11.88”
12.63”
12.27”
13.17”
14.98”
18.59”
22.65”
24.17”
26.86”
31.22”
20
3/4
1
1.5
2.0
3.0
4
5
7
10
15
10.38”
11.00”
11.88”
12.63”
13.18”
12.64”
13.87”
16.31”
19.99”
26.11”
23.02”
24.87”
28.19”
32.62”
39.29”
25
1
1.5
2.0
3.0
4
6
8
13
11.00”
11.88”
12.63”
13.18”
12.64”
15.09”
17.54”
23.66”
23.64”
26.97”
30.17”
36.84”
86
GPM
HP
Stage
A
B
C
5
1/2
3/4
1
9
12
15
10.38”
11.00”
11.88”
15.14”
17.60”
20.06”
25.52”
28.60”
31.94”
7
1/2
3/4
1
1.5
8
10
14
19
10.38”
11.00”
11.88”
12.63”
14.31”
15.96”
19.24”
23.35”
24.69”
26.69”
31.12”
35.98”
10
1/2
3/4
1
1.5
2.0
7
8
11
15
18
10.38”
11.00”
11.88”
12.63”
12.63”
14.07”
14.98”
17.69”
21.31”
24.02”
24.45”
25.98”
29.57”
33.94”
36.65”
15
3/4
1
1.5
2.0
6
8
12
15
11.00”
11.88”
12.63”
12.63”
13.17”
14.98”
18.59”
21.31”
24.17”
26.86”
31.22”
23.94”
20
3/4
1
1.5
2.0
3.0
5
7
10
12
15
11.00”
11.88”
12.63”
12.63”
13.18”
13.87”
16.31”
19.99”
22.43”
26.11”
24.87”
28.19”
32.62”
35.06”
39.29”
25
1
1.5
2.0
3.0
6
8
10
13
11.88”
12.63”
12.63”
13.18”
15.09”
17.54”
19.99”
23.66”
26.97”
30.17”
32.62”
36.84”
V6 Series
High Pressure Vertical Booster Pumps
The Water Horse V6 Booster Pump is ideal for industrial/commercial applications
where water pressure boosting is required. Designed with premium hydraulics
for reliability and excellent performance. The 50WVB is available in 1.5 hp
through 7.5 hp models. The 75WVB is available in 3 hp through 7.5 hp models.
Features:
n Heavy-duty cast iron discharge housing and motor bracket for long life.
n Stainless steel shell, shaft coupling and pump shaft for increased durability.
n Top access to mechanical seal for easy replacement of seal without
disturbing the plumbing or disassembling the pump.
n Standard thrust motors which are available through normal
distribution channels.
n High flow impellers and stages are glass-filled Noryl® for added durability
and strength.
n Unique design allowing rotation of either suction or discharge in 90 degree
increments for optimum installation flexibility.
n Tie-rod construction for easy disassembly and service to impeller stack.
n Maximum water temperature is 120 °F (49 °C).
n Maximum operating pressure is 150 psi.
2” NPT
DISCHARGE
n 2" NPT suction x 2" NPT discharge.
C
B
A
2” NPT
SUCTION
2-13/16”
9-3/16”
7-11/16”
BASE
FOOTPRINT
19/32”
50 GPM
HP
1.5
2
3
5
7.5
A
B
C
1-Phase
3-Phase
1-Phase
3-Phase
1-Phase
3-Phase
10.94
10.94
16.51
16.51
27.04
26.44
12.56
12.56
18.13
18.13
28.66
28.06
14.18
14.18
19.75
19.75
30.95
30.20
19.05
19.05
25.43
25.43
38.32
38.32
N/A
23.92
N/A
30.30
N/A
46.24
1-Phase
3-Phase
1-Phase
3-Phase
1-Phase
3-Phase
10.94
10.94
14.88
14.88
27.70
26.95
14.18
14.18
19.75
19.75
32.64
32.64
N/A
17.43
N/A
23.81
N/A
39.75
75 GPM
HP
3
5
7.5
A
B
C
Notes: Shaft turns counterclockwise if viewed from above motor.
87
V6 Series
GPM
50
WVB Vertical Booster Pumps with Open Drip Proof Motors
Single-phase
Three-phase - 208-230/460V
Model No.
Order No.
Wt.
Model No.
Order No.
Wt.
1.5
50WVB15C6
91333915
100
50WVB15C6-T
91334913
103
2
50WVB2C6
91333923
105
50WVB2C6-T
91333964
108
3
50WVB3C6
91333931
109
50WVB3C6-T
91333972
112
5
50WVB5C6
91334301
208
50WVB5C6-T
91334327
188
50WVB7C6-T
91334293
225
HP
7.5
75
Not Available in Single-Phase
3
75WVB3C6
91334244
106
75WVB3C6-T
91334251
108
5
75WVB5C6
91334350
208
75WVB5C6-T
91334368
182
75WVB7C6-T
91334269
222
7.5
Not Available in Single-Phase
Notes: Single-phase 1/3 - 2 hp motors rated 115/230 V.
Single-phase 3-5 hp motor rated 230V.
Three-phase motors rated 208-230/460V.
1.5 - 7.5 HP V6 Series Booster Pump Ends
GPM
50
75
HP
Pump Ends Only
Model No.
Order No.
Wt.
Three-phase - 575V
Model No.
Order No.
Wt.
1.5
50WVB15C6-PE
91334053
65
50WVB15C6-T5
91339019
103
2
50WVB2C6-PE
91334061
72
50WVB2C6-T5
91339020
108
3
50WVB3C6-PE
91334079
74
50WVB3C6-T5
91339021
112
5
50WVB5C6-PE
91334335
89
50WVB5C6-T5
91339034
188
7.5
50WVB7C6-PE
91334343
95
50WVB7C6-T5
91339035
225
3
75WVB3C6-PE
91334277
70
75WVB3C6-T5
91339036
108
5
75WVB5C6-PE
91334376
75
75WVB5C6-T5
91339037
182
7.5
75WVB7C6-PE
91334285
84
75WVB7C6-T5
91339038
222
88
WVB Booster Pump - 575V
V6 Series
250
7.5 hp
550
225
500
200
450
TOTAL HEAD - FEET
175
150
PSI
60
50
40
EFFICIENCY %
125
100
400
5 hp
350
300
250
3 hp
200
2 hp
150
50
1.5 hp
100
25
50
0
0
30
20
10
0
20
10
30
40
50
60
70
0
80
NPSHR
75
CAPACITY - GALLONS PER MINUTE
Discharge Pressure at Pump with No Lift (Capacities in Gallons per Minute)
HP
1.5
2
3
5
7.5
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230
82
70
56
34
80
72
62
50
35
78
72
65
57
47
35
18
79
75
71
67
63
60
54
48
42
35
25
10
79
77
74
71
68
65
62
59
55
Max
Pres.
(PSI)
46
69
95
165
51
47
43
38
31
25
17
238
Notes: 1. Total discharge pressure of 1.5 thru 7.5 hp. V6 Series units should not exceed 150 psi.
2. Total discharge pressure of 75VB6P50 units should not exceed 400 psi.
89
V6 Series
60
7.5 hp
350
150
50
40
325
300
125
75
50
275
TOTAL HEAD - FEET
PSI
100
EFFICIENCY %
250
5 hp
225
200
175
150
125
3 hp
100
75
50
25
20
0
10
0
0
10
20
30
40
50
60
70
80
90
100
NPSHR
25
0
110
CAPACITY - GALLONS PER MINUTE
HP
3
5
7.5
20
Discharge Pressure at Pump with No Lift (Capacities in Gallons per Minute)
30
35
40
50
60
70
80
90
100
110
120
130
100
82
70
50
108
104
Max Pres.
(PSI)
48
94
86
76
58
20
106
100
94
88
Notes: 1. Total discharge pressure of V6 Series units should not exceed 150 psi.
90
140
93
82
76
66
56
20
143
SubDrive Inline 1100
Constant Pressure Systems
Franklin Electric’s SubDrive Inline 1100 provides constant pressure
for both private wells and municipal/city water systems.
Features:
n
A complete and packaged system
- Pump, motor, drive and pressure switch in one box
n
Small and compact design
- Fits into small areas, even between floor joists
n
Stainless steel construction
- Made for years of operation
n
Simple and easy installation
- Step-by-step illustrated instructions
Applications:
n
Quiet and cool operation
- Integrated motor design allows water to flow around it
n Boosted and consistent water pressure from water
storage/cistern systems
n
NEMA 4 electronics enclosure
n Homes - both in private and minicipal applications
n
Multiple mounting configurations
- Lets you install the unit where you need it: horizontal,
vertical & even upside down
n Sprinkler systems
n
Product power rating: 1.2 hp, 0.9 kW
n Farming and commercial wash down systems
n
Shipping weight: 50 lbs, 22.7 kg
n
Built in system protections guard the Inline unit
from many common failure modes including: surge protection, voltage underload, locked pump,
open circuit, short circuit and overheated controller.
n General pressure boosting
Model Description
1
2
Order No.
Input Voltage
25SDIL1100N4 1
90401101
230
Input Phase
Single
Drive Assembly
305707901
230
Single
Pump Motor Assembly
305707902
230
Single
Mounting Feet
305707903
N/A
N/A
Pressure Switch
305707906
N/A
N/A
Pressure Tank (2-gallon)
305707910
N/A
N/A
Fastener Kit
305707904
N/A
N/A
Pressure Switch Cable
305707905
N/A
N/A
Overpressure Switch 2
305707909
N/A
N/A
Overpressure Switch Cable 2
305707908
N/A
N/A
Includes pump, motor, drive, pressure switch, pressure sensor and all cables.
Overpressure switch is sold as an accessory and is not required for normal operation.
91
Incremental Pressure Increase
Performance Curve
Recommended Operating Range
Flow
Note: Running outside of ‘Recommended Operating Range’ for short periods of time is permissible.
System Components
Water Flow
NEMA 4 Drive
Secure
Power Cord
1-1/4” NPT Inlet
Stainless
Steel Impellers
92
1-1/4” NPT Outlet
Sealed Motor
Typical Installation
5 feet or Less
2 Gallon
Tank
Power
Inline System
Pressure
Gauge
Ball
Valve
Pressure
Relief
Valve
Water Supply
*Check
Valve
Pressure
Sensor
To Home
Ball
Valve
Union
Coupling
Flow
Union
Coupling
Check
Valve
Pressure
Shut-off
Sensor
(Discharge into drain
rated for max pump
output at relief pressure)
(optional)
Optional Bypass
Ball
Valve
Check
Valve
*NOTICE: If system plumbing does not have a backflow prevention device, a check valve is required on the incoming water supply line.
NOTE: These optional components are shown in a typical installation diagram. They should be used at the installer’s discretion as required for particular applications.
Dimensions
1.50"
[ 38.1 ]
Input
Power
2.92"
[ 74.1 ]
1-1/4”
NPT
Outlet
6.65"
[ 168.9 ]
1-1/4”
NPT
Inlet
9.31"
[ 236.4 ]
18.84"
[ 478.5 ]
17.32"
[ 439.9 ]
10.43"
[ 265 ]
5.72"
[ 145.2 ]
7.00"
[ 177.8 ]
8.00"
[ 203.2 ]
3.45"
[ 87.7 ]
93
MOTORS, DRIVES AND CONTROLS
4" Submersible Motors
2-wire Models
Description
HP (kW)
1
⁄3 hp
0.25 kW
1
⁄2 hp
0.37 kW
W/PH
Construction
HZ
S.F.
115
115
230
230
115
230
60
60
60
60
60
60
1.75
1.75
1.75
1.75
1.75
1.75
115
115
220
230
230
115
230
60
60
50
60
60
60
60
1.60
1.60
1.00
1.60
1.60
1.60
1.60
220
230
230
50
60
60
1.00
1.50
1.50
POLLUTION
RECOVERY
230
60
1.50
244 507 09--S
WATER WELL
220
230
230
50
60
60
1.00
1.40
1.40
244 558 12--S
244 508 12--S
244 508 90--S
POLLUTION
RECOVERY
230
60
1.40
244 508 23--S
WATER WELL
220
230
230
50
60
60
1.00
1.30
1.30
244 359 12--S
244 309 12--S
244 309 90--S
230
60
1.30
2-WIRE
POLLUTION
RECOVERY
WATER WELL
2-WIRE
POLLUTION
RECOVERY
⁄4 hp
0.55 kW
1 hp
0.75 kW
1.5 hp
1.1 kW
Motor
Model
Volts
WATER WELL
3
Lead in
motor
WATER WELL
2-WIRE
2-WIRE
2-WIRE
POLLUTION
RECOVERY
YES
YES
YES
YES
YES
YES
YES
244 502 01--S
244 502 90--S
244 503 01--S
244 503 90--S
244 502 09--S
244 503 09--S
244 504 01--S
244 504 90--S
244 555 01--S
244 505 01--S
244 505 90--S
244 504 09--S
244 505 09--S
244 557 01--S
244 507 01--S
244 507 90--S
244 309 23--S
1.Pack Designation: --S = Single Pack, available in any quantity. All 3 hp motors are single-packed.
2. Contact factory for lead time for non-stocked items.
3.Pallet packs available but not shown. Please contact customer service for availability.
94
Stock
Status
Downward
Thrust
Rating
YES
YES
300 LBS
(1500 N)
YES
YES
300 LBS
(1500 N)
YES
300 LBS
(1500 N)
YES
650 LBS
(3000 N)
YES
650 LBS
(3000 N)
3-wire Models
Description
HP (KW)
1
⁄3 hp
0.25 kW
W/
PH
Construction
WATER WELL
3-WIRE
POLLUTION
RECOVERY
1
⁄2 hp
0.37 kW
WATER WELL
3-WIRE
POLLUTION
RECOVERY
⁄4 hp
WATER WELL
3
0.55 kW
1 hp
0.75 kW
1.5 hp
1.1 kW
2 hp
1.5 kW
3 hp
2.2 kW
3-WIRE
3-WIRE
3-WIRE
3-WIRE
3-WIRE
POLLUTION
RECOVERY
Volts
HZ
S.F.
115
115
220
230
230
115
230
60
60
50
60
60
60
60
1.75
1.75
1.00
1.75
1.75
1.75
1.75
115
115
220
230
230
115
230
60
60
50
60
60
60
60
1.60
1.60
1.00
1.60
1.60
1.60
1.60
220
230
230
50
60
60
1.00
1.50
1.50
230
60
1.50
SERIES 600M
230
60
1.50
WATER WELL
220
230
230
50
60
60
1.00
1.40
1.40
POLLUTION
RECOVERY
230
60
1.40
SERIES 600M
230
60
1.40
WATER WELL
220
230
230
50
60
60
1.00
1.30
1.30
POLLUTION
RECOVERY
230
60
1.30
SERIES 600M
230
60
1.30
WATER WELL
220
230
230
50
60
60
1.00
1.25
1.25
230
60
1.25
POLLUTION
RECOVERY
SERIES 600M
WATER WELL
SERIES 600M
Lead in
motor
YES
YES
YES
YES
YES
Motor
Model
Control
Stock
Box Model Status
214 502 44--S
214 502 90--S
214 553 41--S
214 503 44--S
214 503 90--S
214 502 49--S
214 503 49--S
280 102 49
280 102 49
280 353 01
280 103 49
280 103 49
280 102 49
280 103 49
214 504 44--S
214 504 90--S
214 555 41--S
214 505 44--S
214 505 90--S
214 504 49--S
214 505 49--S
280 104 49
280 104 49
280 355 01
280 105 49
280 105 49
280 104 49
280 105 49
214 557 41--S
214 507 44--S
214 507 90--S
280 357 01
280 107 49
280 107 49
214 507 49--S
280 107 49
YES
214 507 0600
YES
214 558 19--S
214 508 12--S
214 508 90--S
280 358 01
280 108 49
280 108 49
214 508 23--S
280 108 49
214 508 0610
YES
224 350 19--S
224 300 19--S
224 300 92--S
282 350 81
282 300 81
282 300 81
224 300 23--S
282 300 81
224 300 0610
YES
224 351 19--S
224 301 19--S
224 301 92--S
282 351 81
282 301 81
282 301 81
224 301 23--S
282 301 81
60
1.25
YES
224 301 0610
50
60
60
1.00
1.15
1.15
YES
224 352 25
224 302 25
224 302 26
230
60
1.15
YES
224 302 0620
YES
YES
YES
YES
300 LBS
(1500 N)
300 LBS
(1500 N)
YES
YES
300 LBS
(1500 N)
YES
YES
650 LBS
(3000 N)
YES
YES
230
YES
YES
YES
220
230
230
Downward
Thrust
Rating
YES
YES
YES
650 LBS
(3000 N)
YES
YES
YES
YES
650 LBS
(3000 N)
YES
282 352 81
282 302 81
282 302 81
YES
YES
900 LBS
(4000 N)
YES
95
Three-Phase Models
Description
HP (KW)
1
⁄2 hp
0.37 kW
W/PH
Construction
WATER WELL
3-PHASE
POLLUTION
RECOVERY
WATER WELL
⁄4 hp
3
0.55 kW
3-PHASE
POLLUTION
RECOVERY
SERIES 600M
WATER WELL
1 hp
0.75 kW
3-PHASE
POLLUTION
RECOVERY
SERIES 600M
Votls
HZ
S.F.
200
200
220
230
230
380/415
460
460
200
230
460
60
60
50
60
60
50
60
60
60
60
60
1.60
1.60
1.00
1.60
1.60
1.00
1.60
1.60
1.60
1.60
1.60
200
200
220
230
230
380/415
460
460
200
230
460
230
460
60
60
50
60
60
50
60
60
60
60
60
60
60
1.50
1.50
1.00
1.50
1.50
1.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
200
200
220
230
230
380/415
460
460
200
230
460
230
60
60
50
60
60
50
60
60
60
60
60
60
1.40
1.40
1.00
1.40
1.40
1.00
1.40
1.40
1.40
1.40
1.40
1.40
460
60
1.40
Lead in
Motor
YES
YES
YES
YES
YES
YES
YES
YES
Model
Stock
Status
Downward
Thrust
Rating
234 501 41--S
234 501 92--S
234 551 41--S
234 511 41--S
234 511 92--S
234 561 31--S
234 521 31--S
234 521 94--S
234 501 49--S
234 511 49--S
234 521 49--S
YES
300 LBS
(1500 N)
234 502 41--S
234 502 92--S
234 552 41--S
234 512 41--S
234 512 92--S
234 562 31--S
234 522 31--S
234 522 94--S
234 502 49--S
234 512 49--S
234 522 49--S
234 512 0600
234 522 0600
YES
234 503 19--S
234 503 92--S
234 553 41--S
234 513 19--S
234 513 92--S
234 563 31--S
234 523 16--S
234 523 94--S
234 503 23--S
234 513 23--S
234 523 23--S
234 513 0610
YES
234 523 0610
YES
YES
YES
96
YES
300 LBS
(1500 N)
YES
YES
YES
YES
YES
650 LBS
(3000 N)
Three-Phase Models
Description
HP (KW)
W/PH
Construction
WATER WELL
1.5 hp
1.1 kW
3-PHASE
POLLUTION
RECOVERY
SERIES 600M
WATER WELL
2 hp
1.5 kW
3-PHASE
POLLUTION
RECOVERY
SERIES 600M
3 hp
2.2 kW
WATER WELL
3-PHASE
SERIES 600M
Lead in
Motor
Model
Votls
HZ
S.F.
200
200
220
230
230
460/380
460/380
575
575
200
230
460/380
230
460/380
60
60
50
60
60
60/50
60/50
60
60
60
60
60/50
60
60
1.30
1.30
1.00
1.30
1.30
1.30/1.00
1.30/1.00
1.30
1.30
1.30
1.30
1.30/1.00
1.30
1.30/1.00
200
200
220
230
230
460/380
460/380
575
60
60
50
60
60
60/50
60/50
60
1.25
1.25
1.00
1.25
1.25
1.25/1.00
1.25/1.00
1.25
575
60
1.25
200
60
1.25
234 305 23--S
230
460/380
230
460/380
60
60/50
60
60
1.25
1.25/1.00
1.25
1.25/1.00
234 315 23--S
234 325 23--S
234 315 0610
234 325 0610
200
200
220
230
230
380
380
460/380
460/380
575
575
230
460/380
60
60
50
60
60
60
60
60/50
60/50
60
60
60
60
1.15
1.15
1.00
1.15
1.15
1.15
1.15
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.15/1.00
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
234 504 19--S
234 504 92--S
234 554 19--S
234 514 19--S
234 514 92--S
234 524 16--S
234 524 94--S
234 534 16--S
234 534 94--S
234 504 23--S
234 514 23--S
234 524 23--S
234 514 0610
234 524 0610
234 305 16--S
234 305 92--S
234 355 19--S
234 315 16--S
234 315 92--S
234 325 16--S
234 325 94--S
234 335 16--S
234 335 94--S
234 306 25--S
234 306 26--S
234 356 25--S
234 316 25--S
234 316 26--S
234 346 25--S
234 346 26--S
234 326 25--S
234 326 26--S
234 336 25--S
234 336 26--S
234 316 0620
234 326 0620
Stock
Status
Downward
Thrust
Rating
YES
YES
YES
650 LBS
(3000 N)
YES
YES
YES
YES
YES
YES
YES
650 LBS
(3000 N)
YES
YES
YES
YES
YES
900 LBS
(4000 N)
YES
YES
97
Super Stainless Models
4" Super Stainless Motor Specifications
Hz
Ph
Hp Range
kW Range
Poles
RPM
Max. Ambient
Temp.
Duty Rating
60
2-Wire
0.3 - 1.5
0.25 - 1.1
2
3450
86 °F/30 °C
Continuous
50
2-Wire
0.5 - 1.5
0.37 - 1.1
2
2875
86 °F/30 °C
Continuous
60
3-Wire
0.3 - 3
0.25 - 2.2
2
3450
86 °F/30 °C
Continuous*
50
3-Wire
0.3 - 3
0.25 - 2.2
2
2875
86 °F/30 °C
Continuous*
60
Three-Phase
0.5 - 3
0.37 - 2.2
2
3450
86 °F/30 °C
Continuous*
50
Three-Phase
0.5 - 3
0.37 - 2.2
2
2875
86 °F/30 °C
Continuous*
4" Pollution Recovery Motor Specifications
Hz
Ph
Hp Range
kW Range
Poles
RPM
Max. Ambient
Temp.
Duty Rating
60
2-Wire
0.3 - 1.5
0.25 - 1.1
2
3450
86 °F/30 °C
Continuous
50
2-Wire
0.5 - 1.5
0.37 - 1.1
2
2875
86 °F/30 °C
Continuous
60
3-Wire
0.3 - 2
0.25 - 1.5
2
3450
86 °F/30 °C
Continuous*
50
3-Wire
0.3 - 2
0.25 - 1.5
2
2875
86 °F/30 °C
Continuous*
60
Three-Phase
0.5 - 2
0.37 - 1.5
2
3450
86 °F/30 °C
Continuous*
50
Three-Phase
0.5 - 2
0.37 - 1.5
2
2875
86 °F/30 °C
Continuous*
*3 hp motors require 0.25 ft/sec flow past motor.
4" Construction Materials
Construction Type
Pollution Recovery
Component
Standard Water Well
Castings
304 SS over Iron
304 SS over Iron
Stator Shell
301 SS
301 SS
Shaft Extension
17-4 SS or 303 SS
303 SS
Fasteners
305 SS or 302 SS
316 SS
Seal Cover
Acetal
Tefzel ®
Seal
Nitrile Rubber Lip
Viton ®
Diaphragm
Nitrile Rubber
Viton ®
Slinger
Nitrile Rubber
Viton ®
Lead Wire (or Cable)
XLPE
Lead not furnished with motor
Lead Potting
Epoxy
Lead Jam Nut
303 SS
Specifications subject to change without notice.
Contact Franklin Electric if current material types are required for bid specifications.
Viton ® is a registered trademark of DuPont Dow Elastomers.
Tefzel ® is a registered trademark of E.I. du Pont Nemours and Company.
98
High Thrust Models
Description
HP (KW)
Construction
WATER WELL
1.5 hp
1.1 kW
316 SS
WATER WELL
2 hp
1.5 kW
SAND FIGHTER
316 SS
OIL STRIPPER
PH
Volts
HZ
S.F.
1P
3P
3P
3P
3P
1P
3P
3P
3P
3P
230
200
230
460/380
575
230
200
230
460/380
575
60
60
60
60/50
60
60
60
60
60/50
60
1.30
1.30
1.30
1.30/1.00
1.30
1.30
1.30
1.30
1.30/1.00
1.30
1P
3P
3P
3P
3P
1P
1P
3P
3P
3P
3P
1P
3P
3P
230
200
230
460/380
575
230
230
200
230
460/380
575
230
230
460/380
60
60
60
60/50
60
60
60
60
60
60/50
60
60
60
60/50
1.25
1.25
1.25
1.25/1.00
1.25
1.15
1.25
1.25
1.25
1.25/1.00
1.25
1.25
1.25
1.25/1.00
Lead in
Motor
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Model
Stock
Status
Downward
Thrust
Rating
224 300 8600
234 504 8600
234 514 8600
234 524 8600
234 534 8600
224 300 8502
234 504 8502
234 514 8502
234 524 8502
234 534 8502
1500 LBS
(6500 N)
224 301 8602
234 305 8600
234 315 8600
234 325 8600
234 335 8600
224 301 8802
224 301 8502
234 305 8502
234 315 8502
234 325 8502
234 335 8502
224 301 8702
234 315 8702
234 325 8702
1500 LBS
(6500 N)
99
High Thrust Models
Description
HP (KW)
Construction
WATER WELL
3 hp
COALBED
METHANE
2.2 kW
SAND FIGHTER
SERIES 600M
316 SS
OIL STRIPPER
4 hp
3 kW
100
WATER WELL
PH
Votls
HZ
S.F.
1P
1P
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
1P
3P
3P
220
230
230
200
200
220
230
230
380
380
460/380
460/380
575
575
200
230
460/380
575
380
230
200
230
50
60
60
60
60
50
60
60
60
60
60/50
60/50
60
60
60
60
60/50
60
60
60
60
60
1.00
1.15
1.15
1.15
1.15
1.00
1.15
1.15
1.15
1.15
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.15
1.15/1.00
1.15
1.15
1.15
1.15
1.15
3P
460/380
60/50
3P
3P
1P
3P
3P
1P
3P
3P
3P
3P
1P
3P
3P
575
380
230
230
460/380
230
200
230
460/380
575
230
230
460/380
3P
3P
Lead in
Motor
Model
YES
YES
YES
YES
YES
YES
YES
YES
YES
224 352 8600
224 302 8600
224 302 8602
234 306 8600
234 306 8602
234 356 8600
234 316 8600
234 316 8602
234 346 8600
234 346 8602
234 326 8600
234 326 8602
234 336 8600
234 336 8602
234 306 8902
234 316 8902
234 326 8902
234 336 8902
234 346 8902
224 302 8802
234 306 8802
234 316 8802
1.15/1.00
YES
234 326 8802
60
60
60
60
60
60
60
60
60/50
60
60
60
60/50
1.15
1.15
1.15
1.15
1.15/1.00
1.15
1.15
1.15
1.15/1.00
1.15
1.15
1.15
1.15/1.00
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
234 336 8802
234 346 8802
224 302 0630
234 316 0630
234 326 0630
224 302 8502
234 306 8502
234 316 8502
234 326 8502
234 336 8502
224 302 8702
234 316 8702
234 326 8702
460/415-380
60/50
1.15/1.00
460/415-380
60/50
1.15/1.00
YES
YES
YES
YES
YES
234 395 8600
YES
234 395 8602
Stock
Status
Downward
Thrust
Rating
YES
1500 LBS
(6500 N)
YES
YES
YES
YES
YES
1500 LBS
(6500 N)
High Thrust Models
Description
HP (KW)
Construction
WATER WELL
5 hp
COALBED
METHANE
3.7 kW
SAND FIGHTER
SERIES 600M
316 SS
OIL STRIPPER
5.5 hp
4 kW
PH
Votls
HZ
S.F.
1P
1P
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
1P
3P
3P
3P
3P
3P
1P
220
230
230
200
200
220
230
230
380
380
460/380
460/380
575
575
200
230
460/380
575
380
230
200
230
460/380
575
380
230
50
60
60
60
60
50
60
60
60
60
60/50
60/50
60
60
60
60
60/50
60
60
60
60
60
60/50
60
60
60
1.00
1.15
1.15
1.15
1.15
1.00
1.15
1.15
1.15
1.15
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.15
1.15/1.00
1.15
1.15
1.15
1.15
1.15
1.15/1.00
1.15
1.15
1.15
3P
230
60
39
1P
3P
3P
3P
3P
1P
3P
3P
460/380
230
200
230
460/380
575
230
230
460/380
3P
3P
Lead in
Motor
Model
Stock
Status
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
224 353 8600
224 303 8600
224 303 8602
234 307 8600
234 307 8602
234 357 8600
234 317 8600
234 317 8602
234 347 8600
234 347 8602
234 327 8600
234 327 8602
234 337 8600
234 337 8602
234 307 8902
234 317 8902
234 327 8902
234 337 8902
234 347 8902
224 303 8802
234 307 8802
234 317 8802
234 327 8802
234 337 8802
234 347 8802
224 303 0630
1.15
YES
234 317 0630
YES
60
60
60
60
60/50
60
60
60
60/50
1.15/1.00
1.15
1.15
1.15
1.15/1.00
1.15
1.15
1.15
1.15/1.00
YES
YES
YES
YES
YES
YES
YES
YES
YES
234 327 0630
224 303 8502
234 307 8502
234 317 8502
234 327 8502
234 337 8502
224 303 8702
234 317 8702
234 327 8702
460/380
60/50
1.15/1.00
460/380
60/50
1.15/1.00
YES
YES
YES
YES
YES
234 397 8600
WATER WELL
YES
234 397 8602
Downward
Thrust
Rating
YES
YES
YES
YES
YES
YES
YES
YES
1500 LBS
(6500 N)
YES
YES
YES
1500 LBS
(6500 N)
101
High Thrust Models
Description
HP (KW)
Construction
WATER WELL
7.5 hp
5.5 kW
COALBED
METHANE
SAND FIGHTER
316 SS
OIL STRIPPER
WATER WELL
10 hp
7.5 kW
COALBED
METHANE
SAND FIGHTER
102
Lead in
Motor
Model
PH
Volts
HZ
S.F.
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
200
200
220
230
230
380
380
460/380
460/380
575
575
200
230
460/380
575
380
200
230
460/380
575
380
200
230
460/380
575
230
460/380
60
60
50
60
60
60
60
60/50
60/50
60
60
60
60
60/50
60
60
60
60
60/50
60
60
60
60
60/50
60
60
60/50
1.15
1.15
1.00
1.15
1.15
1.15
1.15
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.15
1.15/1.00
1.15
1.15
1.15
1.15
1.15/1.00
1.15
1.15
1.15
1.15
1.15/1.00
1.15
1.15
1.15/1.00
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
234 308 8600
234 308 8602
234 358 8600
234 318 8600
234 318 8602
234 348 8600
234 348 8602
234 328 8600
234 328 8602
234 338 8600
234 338 8602
234 308 8904
234 318 8904
234 328 8904
234 338 8904
234 348 8904
234 308 8802
234 318 8802
234 328 8802
234 338 8802
234 348 8802
234 308 8502
234 318 8502
234 328 8502
234 338 8502
234 318 8702
234 328 8702
3P
3P
3P
3P
3P
3P
3P
3P
3P
380
460/380
575
380
460/380
575
380
460/380
575
60
60/50
60
60
60/50
60
60
60/50
60
1.15
1.15/1.00
1.15
1.15
1.15/1.00
1.15
1.15
1.15/1.00
1.15
YES
YES
YES
YES
YES
YES
YES
YES
YES
234 549 8602
234 595 8602
234 598 8602
234 549 8904
234 595 8904
234 598 8904
234 549 8802
234 595 8802
234 598 8802
YES
YES
YES
YES
Stock
Status
Downward
Thrust
Rating
YES
YES
YES
YES
YES
YES
1500 LBS
(6500 N)
YES
YES
YES
YES
YES
YES
1500 LBS
(6500 N)
High Thrust Models
4" High Thrust Motor Specifications
Hz
Ph
Hp
Range
kW
Range
Poles
RPM
Max. Ambient
Temp.
Duty Rating
60
1
1.5 - 5
1.1 - 3.7
2
3450
86 °F/30 °C
Continuous at 0.25 ft/sec flow past motor
50
1
1.5 - 5
1.1 - 3.7
2
2875
86 °F/30 °C
60
3
1.5 - 10
1.1 - 7.5
2
3450
86 °F/30 °C
50
3
1.5 - 10
1.1 - 7.5
2
2875
86 °F/30 °C
Note: Not all ratings available in all construction options.
4" High Thrust Construction Materials
Component
Standard Water Well
Construction Type
Coalbed Methane
Sand Fighter™
Top Castings
Bottom Castings
Stator Shell
Stator Ends
Shaft Extension
Fasteners
Seal Cover
Seal
Diaphragm
Diaphragm Cup
Diaphragm Spring
Diaphragm Cover
Slinger
Lead Wire
(or Cable)
Lead Potting
Lead Screws/
Clamp
Filter
303 SS
303 SS Over Painted Cast Iron
301 SS
Low Carbon Steel
17-4 SS
300 Series SS
Acetal
Nitrile Rubber Lip
Nitrile Rubber
316 SS
316 SS
Gray Iron
Nitrile Rubber
303 SS
301 SS
Low Carbon Steel
17-4 SS
300 series SS
Sintered Bronze
Sand Fighter™ SiC/ SiC Mech Seal
Nitrile Rubber
316 SS
316 SS
Gray Iron
Nitrile Rubber
303 SS
301 SS
Low Carbon Steel
17-4 SS
300 series SS
Sintered Bronze
Sand Fighter SiC/ SiC Mech Seal
Nitrile Rubber
316 SS
316 SS
304 SS
Nitrile Rubber
XLPE*
XLPE*
XLPE*
Epoxy
Epoxy
Epoxy
316 SS
316 SS
316 SS
Delrin & Polyester
Delrin & Polyester
Delrin & Polyester
Construction Type
Component
Chemical (316 STNLS)
Oil Stripper
Top Casting
Bottom Casting
Stator Shell
Stator Ends
Shaft Extension
Fasteners
Seal Cover
Seal
Diaphragm
Diaphragm Cup
Diaphragm Spring
Diaphragm Cover
Slinger
Lead Wire (or Cable)
Lead Potting
Lead Screws/Clamp
Filter
316 SS
316 SS
316 SS
316 SS
17-4 SS
316 SS
316 SS
Sand Fighter SiC Mech Seal
Nitrile Rubber
316 SS
316 SS
316 SS
Nitrile Rubber
XLPE*
Epoxy
316 SS
316 SS Plug
316 SS
316 SS
316 SS
316 SS
17-4 SS
316 SS
316 SS
Sand Fighter Viton ®
Viton ®
316 SS
316 SS
316 SS
Viton ®
XLPE*
Epoxy
316 SS
316 SS Plug
*Removable type, factory-installed in 60 Hz
and dual frequency rated water well motors.
Consult catalog for additional leads.
Specifications subject to change without
notice. Contact Franklin Electric if current
material types are required for bid
specifications.
Viton ® is a registered trademark of DuPont
Dow Elastomers.
103
Leads & Cables
Red
Black
Black
Black
Bushing
Yellow
Black
Black
Yellow
Yellow
Red
Red
Green
Wire
2W
3W
Outer
Sleeve
Green
Lead Length
Construction
Material
Jam Nut
Material
INDIVIDUAL
NITRILE*
316 SS
48 in
INDIVIDUAL
NITRILE*
316 SS
100 in
IN / FT
Wire Size
Grounded
Model
1.2
AWG 14
NO
152 328 905
2.5
AWG 14
NO
152 328 906
M
INDIVIDUAL
XLPE
303 SS
48 in
1.2
AWG 14
YES
152 552 905
INDIVIDUAL
XLPE
303 SS
100 in
2.5
AWG 14
YES
152 552 906
INDIVIDUAL
XLPE
316 SS
48 in
1.2
AWG 14
YES
152 553 905
INDIVIDUAL
XLPE
316 SS
100 in
2.5
AWG 14
YES
152 553 906
INDIVIDUAL
NITRILE*
316 SS
48 in
1.2
AWG 14
NO
152 255 901
INDIVIDUAL
NITRILE*
316 SS
100 in
2.5
AWG 14
NO
152 255 902
INDIVIDUAL
NITRILE*
316 SS
160 in
4.0
AWG 14
NO
152 255 904
INDIVIDUAL
NITRILE*
316 SS
30 ft
9.1
AWG 14
NO
152 255 906
INDIVIDUAL
NITRILE*
316 SS
50 ft
15.2
AWG 14
NO
152 255 907
INDIVIDUAL
NITRILE*
316 SS
100 ft
30.5
AWG 14
NO
152 255 910
INDIVIDUAL
NITRILE*
316 SS
150 ft
45.7
AWG 14
NO
152 255 912
INDIV/DBL CONN
XLPE
316 SS
48 in
1.2
AWG 14
YES
152 570 901
INDIV/DBL CONN
XLPE
316 SS
100 in
2.5
AWG 14
YES
152 570 902
* Nitrile material not for use in potable water.
1. Refer to Franklin Application Installation Maintenance (AIM) Manual for accurate cable sizing.
2. MOTOR WARRANTY IS VOID if Franklin-supplied leads are not used.
104
Standard Models
Description
HP (KW)
Construction
WATER WELL
5 hp
3.7 kW
SAND FIGHTER
316 SS
S.F.
#
Leads
Wire Size
(AWG)
Model
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
226 110 90
236 650 90
236 680 90
236 670 90
236 600 90
236 720 90
236 660 90
236 780 90
236 690 90
236 610 90
PH
Volts
HZ
Subtrol Heat
Sensor
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
230
200-208
220
220
230
230
380
380
415
460/380-415
60
60
50
50
60
60
60
60
50
60/50
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
3P
460/380-415
60/50
Not Available
1.15/1.00
6-90 °
#10 w/GND
236 710 90
3P
1P
3P
3P
3P
3P
3P
575
230
200-208
220
220
230
230
60
60
60
50
50
60
60
Not Available
Not Available
YES
YES
YES
YES
YES
1.15
1.15
1.15
1.00
1.00
1.15
1.15
3
3
3
3
6-90 °
3
6-90 °
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
236 620 90
226 110 80
236 650 81
236 680 81
236 670 81
236 600 81
236 720 81
3P
380
60
YES
1.15
3
#10 w/GND
236 660 81
3P
3P
3P
3P
3P
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
380
415
460/380-415
460/380-415
575
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
60
50
60/50
60/50
60
60
60
50
50
60
60
60
60
50
60/50
60/50
60
YES
YES
YES
YES
YES
Not Available
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.15
1.15/1.00
1.15/1.00
1.15
6-90 °
3
3
6-90 °
3
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
6-90 °
3
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
236 780 81
236 690 81
236 610 81
236 710 81
236 620 81
226 110 39
236 650 40
236 680 40
236 670 40
236 600 40
236 720 40
236 660 40
236 780 40
236 690 40
236 610 40
236 710 40
236 620 40
Stock
Status
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
105
Standard Models
HP
(KW)
Construction
WATER WELL
7.5 hp
5.5 kW
SAND FIGHTER
316 SS
106
PH
Volts
HZ
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
60
60
50
50
60
60
60
60
50
60/50
60/50
60
60
60
50
50
60
60
60
60
50
60/50
60/50
60
60
60
50
50
60
60
60
60
50
60/50
60/50
60
Description
Subtrol Heat
Sensor
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Not Available
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
S.F.
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
#
Wire Size
Leads (AWG)
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
6-90 °
3
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
6-90 °
3
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
6-90 °
3
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
Model
226 111 90
236 651 90
236 681 90
236 671 90
236 601 90
236 721 90
236 661 90
236 781 90
236 691 90
236 611 90
236 711 90
236 621 90
226 111 80
236 651 81
236 681 81
236 671 81
236 601 81
236 721 81
236 661 81
236 781 81
236 691 81
236 611 81
236 711 81
236 621 81
226 111 39
236 651 40
236 681 40
236 671 40
236 601 40
236 721 40
236 661 40
236 781 40
236 691 81
236 611 40
236 711 40
236 621 40
Stock
Status
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Standard Models
HP
(KW)
Description
Construction
WATER WELL
10 hp
7.5 kW
SAND FIGHTER
316 SS
PH
Volts
HZ
Subtrol Heat
Sensor
S.F.
#
Leads
Wire Size
(AWG)
Model
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
60
60
50
50
60
60
60
60
50
60/50
60/50
60
60
60
50
50
60
60
60
60
50
60/50
60/50
60
60
60
50
50
60
60
60
60
50
60/50
60/50
60
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Not Available
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
3
3
3
6-90 °
3
6-90°
3
6-90 °
3
3
6-90 °
3
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
6-90 °
3
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
6-90 °
3
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
226 112 90
236 652 90
236 682 90
236 672 90
236 602 90
236 722 90
236 662 90
236 782 90
236 692 90
236 612 90
236 712 90
236 622 90
226 112 80
236 652 81
236 682 81
236 672 81
236 602 81
236 722 81
236 662 81
236 782 81
236 692 81
236 612 81
236 712 81
236 622 81
226 112 39
236 652 40
236 682 40
236 672 40
236 602 40
236 722 40
236 662 40
236 782 40
236 692 40
236 612 40
236 712 40
236 622 40
Stock
Status
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
107
Standard Models
HP
(KW)
Description
Construction
WATER WELL
15 hp
11 kW
SAND FIGHTER
316 SS
108
PH
Volts
HZ
Subtrol Heat
Sensor
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
1P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
230
200-208
220
220
230
230
380
380
415
460/380-415
460/380-415
575
60
60
50
50
60
60
60
60
50
60/50
60/50
60
60
60
50
50
60
60
60
60
50
60/50
60/50
60
60
60
50
50
60
60
60
60
50
60/50
60/50
60
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Not Available
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
S.F.
#
Leads
Wire Size
(AWG)
Model
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.00
1.15
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
6-90 °
3
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
6-90 °
3
3
3
3
6-90 °
3
6-90 °
3
6-90 °
3
3
6-90 °
3
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
#10 w/GND
226 113 90
236 653 90
236 683 90
236 673 90
236 603 90
236 723 90
236 663 90
236 783 90
236 693 90
236 613 90
236 713 90
236 623 90
226 113 80
236 653 81
236 683 81
236 673 81
236 603 81
236 723 81
236 663 81
236 783 81
236 693 81
236 613 81
236 713 81
236 623 81
226 113 39
236 653 40
236 683 40
236 673 40
236 603 40
236 723 40
236 663 40
236 783 40
236 693 40
236 613 40
236 713 40
236 623 40
Stock
Status
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Standard Models
HP
(KW)
Construction
WATER WELL
20 hp
15 kW
SAND FIGHTER
316 SS
Description
Subtrol
S.F.
Heat Sensor
Model
Stock
Status
#8 w/GND
236 654 90
YES
3
#8 w/GND
236 684 90
6-90 °
#10 w/GND
236 674 90
3
#8 w/GND
236 604 90
1.15
6-90 °
#10 w/GND
236 724 90
1.15
3
#10 w/GND
236 664 90
PH
Volts
HZ
3P
200-208
60
Not Available
1.15
3P
220
50
Not Available
1.00
3P
220
60
Not Available
1.15
3P
230
60
Not Available
1.15
3P
230
60
Not Available
3P
380
60
Not Available
#
Wire Size
Leads (AWG)
3
YES
YES
3P
380
60
Not Available
1.15
6-90 °
#10 w/GND
236 784 90
3P
415
50
Not Available
1.00
3
#10 w/GND
236 694 90
3P
460/380-415
60/50
Not Available
1.15/1.00
3
#10 w/GND
236 614 90
YES
3P
460/380-415
60/50
Not Available
1.15/1.00
6-90 °
#10 w/GND
236 714 90
YES
3P
575
60
Not Available
1.15
3
#10 w/GND
236 624 90
3P
200-208
60
YES
1.15
3
#8 w/GND
236 654 81
236 684 81
YES
3P
220
50
YES
1.00
3
#8 w/GND
3P
220
50
YES
1.00
6-90 °
#10 w/GND
236 674 81
3P
230
60
YES
1.15
3
#8 w/GND
236 604 81
YES
3P
230
60
YES
1.15
6-90 °
#10 w/GND
236 724 81
YES
3P
380
60
YES
1.15
3
#10 w/GND
236 664 81
3P
380
60
YES
1.15
6-90 °
#10 w/GND
236 784 81
3P
415
50
YES
1.00
3
#10 w/GND
236 694 81
3P
460/380-415
60/50
YES
1.15/1.00
3
#10 w/GND
236 614 81
3P
460/380-415
60/50
YES
1.15/1.00
6-90 °
#10 w/GND
236 714 81
3P
575
60
YES
1.15
3
#10 w/GND
236 624 81
3P
200-208
60
YES
1.15
3
#8 w/GND
236 654 40
236 684 40
3P
220
50
YES
1.00
3
#8 w/GND
3P
220
50
YES
1.00
6-90 °
#10 w/GND
236 674 40
3P
230
60
YES
1.15
3
#8 w/GND
236 604 40
3P
230
60
YES
1.15
6-90 °
#10 w/GND
236 724 40
3P
380
60
YES
1.15
3
#10 w/GND
236 664 40
3P
380
60
YES
1.15
6-90 °
#10 w/GND
236 784 40
3P
415
50
YES
1.00
3
#10 w/GND
236 694 40
3P
460/380-415
60/50
YES
1.15/1.00
3
#10 w/GND
236 614 40
3P
460/380-415
60/50
YES
1.15/1.00
6-90 °
#10 w/GND
236 714 40
3P
575
60
YES
1.15
3
#10 w/GND
236 624 40
YES
YES
YES
YES
109
Standard Models
Description
HP (KW) Construction
WATER WELL
25 hp
SAND FIGHTER
18.5 kW
316 SS
110
S.F.
#
Leads
Wire Size
(AWG)
Model
Stock
Status
YES
HZ
Subtrol Heat
Sensor
200-208
60
Not Available
1.15
3
#8 w/GND
236 655 90
220
50
Not Available
1.00
3
#8 w/GND
236 685 90
3P
220
50
Not Available
1.00
6-90 °
#10 w/GND
236 675 90
3P
230
60
Not Available
1.15
3
#8 w/GND
236 605 90
3P
230
60
Not Available
1.15
6-90 °
#10 w/GND
236 725 90
3P
380
60
Not Available
1.15
3
#10 w/GND
236 665 90
3P
380
60
Not Available
1.15
6-90 °
#10 w/GND
236 785 90
Not Available
1.00
236 695 90
PH
Volts
3P
3P
YES
YES
3P
415
50
3
#10 w/GND
3P
460/380-415
60/50
Not Available 1.15/1.00
3
#10 w/GND
236 615 90
YES
3P
460/380-415
60/50
Not Available 1.15/1.00
6-90 °
#10 w/GND
236 715 90
YES
3P
575
60
Not Available
1.15
3
#10 w/GND
236 625 90
3P
200-208
60
YES
1.15
3
#8 w/GND
236 655 81
3P
220
50
YES
1.00
3
#8 w/GND
236 685 81
3P
220
50
YES
1.00
6-90 °
#10 w/GND
236 675 81
3P
230
60
YES
1.15
3
#8 w/GND
236 605 81
YES
3P
230
60
YES
1.15
6-90 °
#10 w/GND
236 725 81
YES
3P
380
60
YES
1.15
3
#10 w/GND
236 665 81
3P
380
60
YES
1.15
6-90 °
#10 w/GND
236 785 81
3P
415
50
YES
1.00
3
#10 w/GND
236 695 81
3P
460/380-415
60/50
YES
1.15/1.00
3
#10 w/GND
236 615 81
3P
460/380-415
60/50
YES
1.15/1.00
6-90 °
#10 w/GND
236 715 81
3P
575
60
YES
1.15
3
#10 w/GND
236 625 81
3P
200-208
60
YES
1.15
3
#8 w/GND
236 655 40
3P
220
50
YES
1.00
3
#8 w/GND
236 685 40
3P
220
50
YES
1.00
6-90°
#10 w/GND
236 675 40
3P
230
60
YES
1.15
3
#8 w/GND
236 605 40
3P
230
60
YES
1.15
6-90 °
#10 w/GND
236 725 40
3P
380
60
YES
1.15
3
#10 w/GND
236 665 40
3P
380
60
YES
1.15
6-90 °
#10 w/GND
236 785 40
3P
415
50
YES
1.00
3
#10 w/GND
236 695 40
3P
460/380-415
60/50
YES
1.15/1.00
3
#10 w/GND
236 615 40
3P
460/380-415
60/50
YES
1.15/1.00
6-90 °
#10 w/GND
236 715 40
3P
575
60
YES
1.15
3
#10 w/GND
236 625 40
YES
YES
YES
YES
Standard Models
HP (KW)
Construction
WATER WELL
30 hp
22 kW
SAND FIGHTER
316 SS
HZ
Description
Subtrol Heat
S.F.
Sensor
Model
Stock
Status
#8 w/GND
236 656 90
YES
#8 w/GND
236 686 90
#
Wire Size
Leads (AWG)
PH
Volts
3P
200-208
60
Not Available
1.15
3
3P
220
50
Not Available
1.00
3
3P
220
50
Not Available
1.00
6-90 °
#10 w/GND
236 676 90
3P
230
60
Not Available
1.15
3
#8 w/GND
236 606 90
3P
230
60
Not Available
1.15
6-90 °
#10 w/GND
236 726 90
3P
380
60
Not Available
1.15
3
#10 w/GND
236 666 90
3P
380
60
Not Available
1.15
6-90 °
#10 w/GND
236 786 90
236 696 90
YES
YES
3P
415
50
Not Available
1.00
3
#10 w/GND
3P
460/380-415
60/50
Not Available
1.15/1.00
3
#10 w/GND
236 616 90
YES
3P
460/380-415
60/50
Not Available
1.15/1.00
6-90 °
#10 w/GND
236 716 90
YES
3P
575
60
Not Available
1.15
3
#10 w/GND
236 626 90
3P
200-208
60
YES
1.15
3
#8 w/GND
236 656 81
3P
220
50
YES
1.00
3
#8 w/GND
236 686 81
3P
220
50
YES
1.00
6-90 °
#10 w/GND
236 676 81
3P
230
60
YES
1.15
3
#8 w/GND
236 606 81
YES
3P
230
60
YES
1.15
6-90 °
#10 w/GND
236 726 81
YES
3P
380
60
YES
1.15
3
#10 w/GND
236 666 81
3P
380
60
YES
1.15
6-90 °
#10 w/GND
236 786 81
3P
415
50
YES
1.00
3
#10 w/GND
236 696 81
3P
460/380-415
60/50
YES
1.15/1.00
3
#10 w/GND
236 616 81
3P
460/380-415
60/50
YES
1.15/1.00
6-90 °
#10 w/GND
236 716 81
3P
575
60
YES
1.15
3
#10 w/GND
236 626 81
3P
200-208
60
YES
1.15
3
#8 w/GND
236 656 40
236 686 40
3P
220
50
YES
1.00
3
#8 w/GND
3P
220
50
YES
1.00
6-90 °
#10 w/GND
236 676 40
3P
230
60
YES
1.15
3
#8 w/GND
236 606 40
3P
230
60
YES
1.15
6-90 °
#10 w/GND
236 726 40
3P
380
60
YES
1.15
3
#10 w/GND
236 666 40
3P
380
60
YES
1.15
6-90 °
#10 w/GND
236 786 40
3P
415
50
YES
1.00
3
#10 w/GND
236 696 40
3P
460/380-415
60/50
YES
1.15/1.00
3
#10 w/GND
236 616 40
3P
460/380-415
60/50
YES
1.15/1.00
6-90 °
#10 w/GND
236 716 40
3P
575
60
YES
1.15
3
#10 w/GND
236 626 40
YES
YES
YES
YES
111
Standard Models
HP (KW)
Construction
WATER WELL
40 hp
30 kW
SAND FIGHTER
316 SS
WATER WELL
WITH
SAND FIGHTER
SEAL
50 hp
30 kW
316 SS
WATER WELL
WITH
SAND FIGHTER
SEAL
60 hp
45 kW
316 SS
Description
Subtrol Heat
S.F.
Sensor
Model
Volts
HZ
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
380
380
415
460/380-415
460/380-415
575
380
380
415
460/380-415
460/380-415
575
380
380
415
460/380-415
460/380-415
575
60
60
50
60/50
60/50
60
60
60
50
60/50
60/50
60
60
60
50
60/50
60/50
60
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
3
6-90 °
3
3
6-90 °
3
3
6-90 °
3
3
6-90 °
3
3
6-90 °
3
3
6-90 °
3
#8 w/GND
#10 w/GND
#8 w/GND
#8 w/GND
#10 w/GND
#8 w/GND
#8 w/GND
#10 w/GND
#8 w/GND
#8 w/GND
#10 w/GND
#8 w/GND
#8 w/GND
#10 w/GND
#8 w/GND
#8 w/GND
#10 w/GND
#8 w/GND
236 667 90
236 787 90
236 697 90
236 617 90
236 717 90
236 627 90
236 667 81
236 787 81
236 697 81
236 617 81
236 717 81
236 627 81
236 667 40
236 787 40
236 697 40
236 617 40
236 717 40
236 627 40
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
380
380
415
460/380-415
460/380-415
575
380
380
415
460/380-415
460/380-415
575
60
60
50
60/50
60/50
60
60
60
50
60/50
60/50
60
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
3
6-90 °
3
3
6-90 °
3
3
6-90 °
3
3
6-90 °
3
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
276 668 60
276 788 60
276 698 60
276 618 60
276 718 60
276 628 60
276 668 40
276 788 40
276 698 40
276 618 40
276 718 40
276 628 40
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
3P
380
380
415
460/380-415
460/380-415
575
380
380
415
460/380-415
460/380-415
575
60
60
50
60/50
60/50
60
60
60
50
60/50
60/50
60
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
1.15
1.15
1.00
1.15/1.00
1.15/1.00
1.15
3
6-90 °
3
3
6-90 °
3
3
6-90 °
3
3
6-90 °
3
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
#8 w/GND
276 669 60
276 789 60
276 699 60
276 619 60
276 719 60
276 629 60
276 669 40
276 789 40
276 699 40
276 619 40
276 719 40
276 629 40
1. Models designated above as Sand Fighter™ are water well construction.
2. All 316 SS and Ni-Resist models are equipped with Sand Fighter sealing system.
3. All models listed above include factory-installed leads (13 ft).
112
#
Wire Size
Leads (AWG)
PH
Stock
Status
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Standard Models
Standard 6" Motor Specifications
HZ
PH
HP
Range
kW
Range
Poles
RPM
Max. Ambient
Temp.
Duty Rating
60
50
1
1
5 - 15
5 - 15
3.7 - 11
3.7 - 11
2
2
3450
2875
86 °F/30 °C
86 °F/30 °C
6" Construction Materials
Construction Type
Component
Standard Water Well
Sand Fighter™
Corrosion Resistant
(316 SS)
UL Insulation Class Rating
Motor Ambient
Temperature Rating
Class F
86 °F/30 °C (5-40 hp)
122 °F/50 °C (50-60 hp)
FE Standard (5-40 hp)
FE Hi-Temp (50-60 hp)
Per Standard Water Well
FES91
Epoxy Coated Gray Iron
No (5-40 hp)
Yes (50-60 hp)
300 SS Series
Carbon Steel
300 SS Series (5-30 hp)
17-4 SS (40-60 hp)
Bronze
300 SS Series
Carbon Ceramic Seal (5-40 hp)
Sand Fighter™ Seal System
(50-60 hp)
Nitrile (5-40 hp)
Viton ® (50-60 hp)
Nitrile (5-40 hp)
Viton ® (50-60 hp)
300 SS Series
300 SS Series
Nitrile (5-40 hp)
Viton ® (50-60 hp)
XLPE
Epoxy
Brass
3500 lbs (5-30 hp)
6000 lbs (40-60 hp)
Ground Wire In Power
Lead Connector
316 SS
Yes
Yes
316 SS
316 SS
17-4 SS
316 SS
316 SS
Sand Fighter Seal System
Sand Fighter Seal System
316 SS
25-6 MO SS
Nitrile
316 SS
Stator Resin Type
Motor Fill Solution
(Water Soluble/Non-Toxic)
Top End Bell & Thrust Housing
On Winding SubTrol™
heat sensor
Stator Shell
Stator Ends
Shaft Extension
Bushing
Bushing Retainer
Shaft Mechanical Seal
Mechanical Seal
Rubber Components
Diaphragm Material
Diaphragm Plate
Diaphragm Spring
Shaft Slinger
Lead Wire
Lead Potting
Lead Jam Nut
Thrust Bearing Rating
(86 °F/30 °C)
Method Of Connecting System
Ground To Motor
Specifications subject to change without notice.
Contact Franklin Electric if current material types are required for bid specifications.
Viton ® is a registered trademark of DuPont Dow Elastomers.
113
6” Submersible Motors
Leads
374 bushing with raised circular sealing tab
Sleeve with tape
3 power conductors or
3 power conductors with ground
6" Lead Construction Material
Component
Material
Wire
Sleeve
Potting
Jam Nut
XLPE 125 °C
Brass or 316 SS
Epoxy
Brass or 316 SS
Specifications subject to change without notice. Contact Franklin
Electric if current material types are required for bid specifications.
Standard XLPE 125 °C Lead
Excellent resistance to ozone, abrasion, heat, and oxidizing chemicals.
Fits FE
Motor
Rating
All 6"
Ratings
5-30 hp
3.7-22
kW
FT
M
Wire
Size
(AWG)
Brass
13
4
#8
3 w/GND
152 671 901
305 517 901
Brass
26
8
#8
3 w/GND
152 671 902
305 517 902
316 SS
13
4
#8
3 w/GND
152 671 951
305 517 951
316 SS
26
8
#8
3 w/GND
152 671 952
305 517 952
316 SS
50
15
#10
3 w/GND
152 672 955
305 518 955
316 SS
75
23
#10
3 w/GND
152 672 957
305 518 957
316 SS
100
30
#10
3 w/GND
152 672 960
305 518 960
316 SS
125
38
#10
3 w/GND
152 672 962
305 518 962
316 SS
150
45
#10
3 w/GND
152 672 965
305 518 965
316 SS
50
15
#8
3 w/GND
152 671 955
305 517 955
316 SS
75
23
#8
3 w/GND
152 671 957
305 517 957
316 SS
100
30
#8
3 w/GND
152 671 960
305 517 960
316 SS
125
38
#8
3 w/GND
152 671 962
305 517 962
316 SS
150
45
#8
3 w/GND
152 671 965
305 517 965
Jam Nut
Material
Lead Length
Power Wires
FE Part
Number
Replacement Kit Number
Notes:
1. Refer to Franklin Application Installation Maintenance (AIM) Manual for accurate cable sizing.
2. Nitrile cable uses lead sleeve 1” longer than standard.
3. MOTOR WARRANTY IS VOID if Franklin-supplied leads are not used.
4. Replacement leads are available in 25 ft. increments up to 150 ft. Special-cut lengths may be available at an
additional charge. Consult factory for price and availability.
114
Submersible Motor Control Boxes
QD, Standard and Deluxe Control Boxes
Applications:
QUICK DISCONNECT (QD) & CAPACITOR
RUN CONTROL (CRC) – These control boxes
are designed for use with Franklin 3-wire
single-phase submersible motors through 1 hp.
STANDARD & DELUXE – These control boxes
are designed for use with Franklin 3-wire
single-phase submersible motors from 1
through 15 hp. Recommended for water
systems that use pressure switches, level
switches, or other pilot devices.
Deluxe boxes (only) contain magnetic line
contactors carefully matched to the motor
rating, eliminating the need for external
line contactors.
Basic Features – Standard & Deluxe Boxes
Basic Features – All Boxes
■■
Suitable for outdoor mounting
■■
Heavy duty box-type terminals accept up to AWG #2 wire
■■
Capacitor Start / Capacitor Run design
(except QD boxes)
■■
External access to overload resets
■■
Multiple-size knockouts
■■
UL Listed for US and Canada
(60 Hz models)
■■
User-friendly connection diagrams
■■
Easy access to grounding lugs
Single-Phase Control Box Specifications
Box Type
HP
KW
HZ
Range Range
Terminal Block
Enclosure
Terminals
Max
Wire
Mag
Contactor
Agency
Approvals
UL listed for US
and Canada
Quick Disconnect (QD)
60
1/3 - 1
0.25 - 0.75
NEMA 3R, IP23
5
AWG 10
No
Quick Disconnect (QD)
50
1/3 - 1
0.25 - 0.75
NEMA 3R, IP23
5
AWG 10
No
CSA Certified
Capacitor Run Control
(CRC)
60
1/2 - 1
0.37 - 0.75
NEMA 3R, IP23
5
AWG 10
No
Standard (S)
60
1 - 10
0.75 - 7.5
NEMA 3R, IP23
5
AWG 2
No
Standard (S)
50
1.5 - 5
0.75 - 3.7
NEMA 3R, IP23
5
AWG 2
No
CSA Certified
Deluxe (D)
60
2 - 15
1.5 - 11
NEMA 3R, IP23
6
AWG 2
Yes
UL listed for US
and Canada
Extra Large Deluxe (D-XL)
60
15
11
NEMA 3R, IP23
5
AWG 00
Yes
UL listed for US
and Canada
UL listed for US
and Canada
UL listed for US
and Canada
115
Submersible Motor Control Boxes
QD, Standard & Deluxe Control Boxes
HP (KW)
1
⁄3 hp (0.25 kW)
Description
PH
Volts
HZ
Type
Model
Stock
Status
YES
1P
115
60
Q
280 102 4915
1P
220
50
Q
280 353 0115
1P
230
60
Q
280 103 4915
YES
1P
115
60
Q
280 104 4915
YES
1P
220
50
Q
280 355 0115
YES
1P
230
60
Q
280 105 4915
YES
1P
230
60
CRC
282 405 5015
YES
1P
220
50
Q
280 357 0115
YES
1P
230
60
Q
280 107 4915
YES
1P
230
60
CRC
282 407 5015
YES
1P
220
50
Q
280 358 0115
YES
1P
230
60
Q
280 108 4915
YES
1P
230
60
CRC
282 408 5015
YES
1P
220
50
S
282 350 8110
YES
1P
230
60
S
282 300 8110
YES
1P
220
50
S
282 351 8110
YES
1P
230
60
S
282 301 8110
YES
1P
230
60
D
282 301 8310
YES
1P
220
50
S
282 352 8110
YES
1P
230
60
S
282 302 8110
YES
1P
230
60
D
282 302 8310
YES
1P
220
50
S
282 253 9010
YES
1P
230
60
S
282 113 8110
YES
1P
230
60
D
282 113 9310
YES
7.5 hp (5.5 kW)
1P
230
60
S
282 201 9210
YES
1P
230
60
D
282 201 9310
YES
10 hp (7.5 kW)
1P
230
60
S
282 202 9230
YES
1P
230
60
D
282 202 9330
YES
15 hp (11 kW)
1P
230
60
D
282 203 9330
YES
1P
230
60
D-XL
282 203 9621
/2 hp (0.37 kW)
1
⁄4 hp (0.55 kW)
3
1 hp (0.75 kW)
1.5 hp (1.1 kW)
2 hp (1.5 kW)
3 hp (2.2 kW)
5 hp (3.7 kW)
Q = Quick Disconnect Control Box
CRC = Capacitor Run Control Box
S = Standard Control Box
D = Deluxe Control Box
D-XL = Extra Large Deluxe Control Box
116
Submersible Motor Protection
Pumptec Family
Pumptec Single-Phase
Protection Devices
Applications
These protection devices are designed to protect
Franklin Electric single-phase motors from the
various conditions listed below.
QD Pumptec is
designed to easily plug
into any Franklin QD
Relay Control Box.
QD Pumptec
Pumptec
Pumptec-Plus
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Rapid Cycling
n
n
Water Logged Tank
n
n
n
n
Air or Gas Locked Pump (Cavitation)
Broken Shaft or Coupling
Clogged Well Screen
Drop in Water Level
Faulty Check Valve
High Voltage
Low Voltage
Low Yield Wells
Worn Pump Parts
n
n
n
n
QD Pumptec
Exclusively designed for Franklin QD Relay Control Boxes, QD Pumptec is a solid state sensing device that monitors
motor load and incoming power to automatically shut off a Franklin single-phase, 3-wire motor when related fault
conditions are detected. QD Pumptec easily plugs into 3-wire Franklin QD Control Boxes with no additional wiring or
tools required.
Pumptec
Pumptec is a microcomputer-based device that monitors motor load and power line conditions to provide protection
against dry well conditions, waterlogged tanks, and abnormal line voltage conditions. Pumptec interrupts power to
the motor whenever the load drops quickly or below a preset level. Indicator lights provide complete system status.
Pumptec-Plus
The Pumptec-Plus solid state pump protection system is designed for 1/2 to 5 hp single-phase submersible
pump motors. Pumptec-Plus protects against a variety of fault conditions. Run and fault lights make diagnosis quick and
easy. Push button Snap Shot™ calibration makes Pumptec-Plus simple to install and an effective troubleshooting tool.
117
Pumptec Family
Single-Phase Electronic Protection Device Specifications
HP
Range
KW
Range
Volts
HZ
Reset Time
Agency
Approvals
Pumptec w/IR
Control
1/3 - 1.5
0.25 - 1.1
115/230
60/50
Adjustable (2-120 Minutes)
UL/cUL Listed
Pumptec-Plus
1/2 - 5.0
0.37 - 3.7
230
60
Adjustable
(1-240 Minutes or Manual)
UL/cUL Listed
Pumptec-Plus
1/2 - 5.0
0.37 - 3.7
220
50
Adjustable
(1-240 Minutes or Manual)
UL/cUL Listed
QD Pumptec
1/3 - 1.0
0.25 - 0.75
230
60
Adjustable (2-240 Minutes)
UL/cUL Listed
Product
Models
Description
Product
Pumptec w/IR Control
Pumptec-Plus
QD Pumptec
Model
Stock
Status
PH
HP
Volts
HZ
1P
1/3 - 1.5
115/230
60/50
580 002 0600
YES
1P
1/2 - 5.0
230
60
580 006 0100
YES
1P
1/2 - 5.0
220
50
580 006 0500
YES
1P
1/3 - 1.0
230
60
580 007 0600
YES
QD Pumptec
Single-Phase Protection Devices
Shipping Weight
Product
Pumptec W/IR Control
LBS
KG
Motor Carton Size
(in inches)
3
1.3
5.25 x 8.875 x 3.25
Pumptec-Plus
7
3.1
8.25 x 11.25 x 6.25
QD Pumptec
<1
<0.05
4.25 x 2.375 x 2.25
Pumptec IR
Front
2.99"
2.06"
8.03"
1.60"
Pumptec-Plus
1.19"
(W)
4.81"
Side
10.50"
(H)
8.41"
(D)
2.84"
118
Side
9.31"
Side
5.84"
3.29"
Three-Phase Control Panel
Three-Phase Panel
Applications
Franklin’s heavy duty three-phase panels are
optimized for water and irrigation applications.
The spacious layout makes installation and
maintenance simple and easy, so there’s no
need to spend time wrestling with wires, and
adding components is easy. With a Franklin
three-phase control panel, you can be
sure that your system is set-up according to
Franklin’s recommendations.
Franklin Electric three-phase control panels are
available from 3 to 200 hp, in ratings from
200 to 575 Volts.
Basic Features
■■
UL approved, heavy-duty NEMA 3R enclosure
■■
Class R fusible disconnect
■■
Service entrance rated
■■
Lightning arrestor
■■
Motor logic or Franklin SubMonitor protected
■■
NEMA contactor
■■
Door wind hinge
■■
Pilot device and alarm terminal block
■■
H-O-A switch
■■
Manual push-to-start switch
■■
Easy hook-up
Notes: For three-phase panel accessories,
see the Franklin Electric Motors,
Drives & Controls Catalog.
119
Three-Phase Control Panel
HP
Description Volts
MOTOR
LOGIC
3
SUBMONITOR
MOTOR
LOGIC
5
SUBMONITOR
MOTOR
LOGIC
7.5
SUBMONITOR
MOTOR
LOGIC
10
SUBMONITOR
MOTOR
LOGIC
15
SUBMONITOR
MOTOR
LOGIC
20
SUBMONITOR
Model
WT
200
HZ Amps
60
6-18
281 101 2203
56
230
60
6-18
281 101 3303
56
460
60
3-9
281 101 4402
56
575
60
3-9
281 101 5502
56
200
60
ALL
281 101 2200
59
230
60
ALL
281 101 3300
59
HP
MOTOR
LOGIC
25
SUBMONITOR
HZ Amps
Model
WT
200
60
30-90
281 206 2208
145
230
60
30-90
281 206 3308
145
460
60
15-45
281 104 4406
60
575
60
15-45
281 104 5506
60
200
60
ALL
281 206 2200
148
230
60
ALL
281 206 3300
148
63
460
60
ALL
281 101 4400
59
460
60
ALL
281 104 4400
575
60
ALL
281 101 5500
59
575
60
ALL
281 104 5500
63
200
60
9-27
281 101 2204
56
200
60
45-135
281 207 2209
147
230
60
9-27
281 104 3304
56
230
60
45-135
281 207 3309
147
460
60
3-9
281 101 4402
56
460
60
30-90
281 104 4407
145
145
575
60
3-9
281 101 5502
56
200
60
ALL
281 101 2200
59
230
60
ALL
281 101 3300
59
460
60
ALL
281 101 4400
59
575
60
ALL
281 101 5500
59
200
60
15-45
281 104 2206
60
230
60
15-45
281 104 3306
60
460
60
6-18
281 101 4403
56
575
60
6-18
281 101 5503
56
200
60
ALL
281 104 2200
63
230
60
ALL
281 104 3300
63
460
60
ALL
281 101 4400
59
575
60
ALL
281 101 5500
59
200
60
15-45
281 104 2206
60
230
60
15-45
281 104 3306
60
460
60
9-27
281 101 4404
56
575
60
6-18
281 101 5503
56
200
60
ALL
281 104 2200
63
230
60
ALL
281 104 3300
63
460
60
ALL
281 101 4400
59
575
60
ALL
281 101 5500
59
200
60
45-135
281 204 2208
147
230
60
30-90
281 204 3308
145
460
60
15-45
281 104 4406
60
575
60
15-45
281 104 5506
60
200
60
ALL
281 204 2200
150
230
60
ALL
281 204 3300
148
460
60
ALL
281 103 4400
63
575
60
ALL
281 104 5500
59
200
60
30-90
281 205 2208
145
230
60
30-90
281 205 3308
145
460
60
15-45
281 104 4406
60
575
60
15-45
281 104 5506
60
200
60
ALL
281 205 2200
148
230
60
ALL
281 205 3300
148
460
60
ALL
281 103 4400
63
575
60
ALL
281 104 5500
59
MOTOR
LOGIC
575
60
30-90
281 204 5507
200
60
ALL
281 207 2200
151
230
60
ALL
281 207 3300
151
460
60
ALL
281 106 4400
148
575
60
ALL
281 204 5500
148
MOTOR
LOGIC
460
60
30-90
281 205 4408
145
575
60
30-90
281 204 5507
145
SUBMONITOR
460
60
ALL
281 205 4400
148
575
60
ALL
281 204 5500
148
MOTOR
LOGIC
460
60
30-90
281 206 4408
145
575
60
30-90
281 205 5508
145
SUBMONITOR
460
60
ALL
281 206 4400
148
30
SUBMONITOR
40
50
60
75
100
125
150
175
200
120
Description Volts
575
60
ALL
281 205 5500
148
460
60
45-135
281 207 4409
147
575
60
45-135
281 307 5510
147
SUBMONITOR
460
60
ALL
281 207 4400
150
575
60
ALL
281 307 5500
150
MOTOR
LOGIC
460
60
45-135
281 207 4409
147
575
60
45-135
281 307 5510
147
SUBMONITOR
460
60
ALL
281 207 4400
150
575
60
ALL
281 307 5500
150
MOTOR
LOGIC
460
60
90-270
281 308 4411
390
575
60
45-135
281 307 5510
147
SUBMONITOR
460
60
ALL
281 308 4400
393
575
60
ALL
281 307 5500
150
MOTOR
LOGIC
460
60
90-270
281 309 4411
390
575
60
90-270
281 309 5511
390
SUBMONITOR
460
60
ALL
281 309 4400
393
575
60
ALL
281 309 5500
393
MOTOR
LOGIC
460
60
90-270
281 310 4412
390
575
60
90-270
281 309 5511
390
SUBMONITOR
460
60
ALL
281 310 4400
393
575
60
ALL
281 309 5500
393
MOTOR
LOGIC
460
60
90-270
2813104412
390
575
60
90-270
2813105512
390
SUBMONITOR
460
60
ALL
2813104400
393
575
60
ALL
2813105500
393
MOTOR
LOGIC
460
60
18-540
2813114413
660
575
60
90-270
2813105512
390
SUBMONITOR
460
60
ALL
2813114400
663
575
60
ALL
2813105500
393
MOTOR LOGIC
SubMonitor - Three-Phase Motor Protection
Applications
SubMonitor is designed to protect three-phase pumps
by monitoring current, voltage and motor temperature*
using three integrated current transformers. A face
mounted digital display provides real-time current and
voltage readings for all three legs and allows the user
to set up the SubMonitor quickly and easily.
Protects Against
■■
Under/Overload
■■
Under/Overvoltage
■■
Current Unbalance
■■
Overheated Motor (Subtrol-equipped)
■■
False Start (Chattering)
■■
Phase Reversal
Features
■■
Quick, menu-driven set-up
■■
■■
Digital display shows voltage and current on all
three legs at once
Stored fault, setting changes, and pump run-time
information easily accessed through display head
■■
■■
Fault messages in easily understandable text
Detachable NEMA 3R display unit easily mounted
on panel door
■■
Rated for 190 to 600 Volts
■■
Turn-and-push adjustment knob
■■
No need for additional turns around the CT or to
add external CTs
■■
Base unit can operate independent of
detachable head
■■
Password protection option
■■
UL and cUL listed
■■
DIN rail mounting option
Three-Phase Electronic Protection Device Specifications
Input Voltage.................................... 190 – 600 VAC
Frequency.................................................... 60/50 Hz
Motor Service Factor Amps............. 5 to 350 Amps
Maximum Conductor Size Through Sensors
Max Diameter.......................... 0.920 in. (23 mm)
Trip Response
Motor Under/Overload, Under/Overvoltage,
Overheat, Unbalance........................ 3 seconds
Control Circuit Rating......1.5 Amp AC, up to 600V
Signal Circuit Rating...............1 Amp AC, up to 250V
Wiring Terminals
Wire Gauge................................... #12 to #18 AWG
Tighten to................................................... 4.5 in-lbs
Weight (SubMonitor)............................... 3.3 lbs/1.5 kg
Carton Size (Std. Unit).............7.75 in x 11.5 in x 6.75 in
(19.7 cm x 29.2 cm x 17.1 cm)
Shipping Weight (Std. Unit)................... 3.5 lbs/1.5 kg
Agency Approval............................UL and cUL listed
* For motors equipped with a Subtrol heat sensor
121
Three-Phase Control Panel - Accessories
Models
Dimensions and Weights
Product
Description
Max Amps
PH
Volts
Range
HZ
Model
Stock
Status
SubMonitor Standard
3
5 - 350
190 - 600
60/50
586 000 5000
YES
SubMonitor Premium*
3
5 - 350
190 - 600
60/50
586 000 5100
YES
Display Only
N/A
N/A
N/A
N/A
225 190 902
YES
Base Only
N/A
N/A
N/A
N/A
225 210 902
YES
Shipping
Weight
LBS
KG
3.3
1.5
Motor Carton
Size (in inches)
7.75 x 11.5 x 6.75
*Includes lightning arrestor and 3-year warranty on SubMonitor and Subtrol-equipped motor
Front Base Unit
Top Base Unit
Detachable Display Unit
5.35”
5.7”
3”
4”
4.3”
7”
8”
8”
Display
■■
Real-time display of voltage and current
for each leg.
■■
Easy menu-driven setup and adjustment
of monitoring parameters.
SubMonitor Accessory
D3 Data Download Tool
D3 is a service tool that provides the capability to
download data from SubMonitor and transfer that
data to a PC.
Includes:
■■ D3 unit
585 001 1100
122
■■
Transfer software
■■
USB cable
Constant Pressure Drives
SubDrive/MonoDrive
Applications
Franklin Electric’s constant pressure controllers use state-of-the-art technology to provide constant
water pressure through variable speed control of submersible water well pumps.
Features - All Controllers
■■
Constant water pressure with a wide range of settings (25 to 80 psi)
■■
NEMA 3R (Outdoor), NEMA 4 (Outdoor) and NEMA 1 (Indoor) Enclosures
■■
Easy installation
■■
Soft start feature prevents water hammer and increases motor life
■■
Works with small pressure tanks or existing larger tanks
■■
Smart Reset ® technology allows well recovery before restarting the pump
■■
Single-phase input power with three-phase motor performance (SubDrive models)
■■
Excellent radio frequency interference shielding
■■
UL and cUL listed
■■
Built-in Diagnostics and Protection
Surge protection
Underload
●● Undervoltage
●● Locked pump
●● Open circuit
●● Short circuit
●● Overheated controller
●●
●●
123
SubDrive/MonoDrive
Features — MonoDrive & MonoDriveXT
■■
■■
■■
■■
■■
Selectable hp rating: MonoDrive (½, ¾, and 1 hp), MonoDriveXT (1.5 and 2 hp)
Easy installation – remove the 3-wire control box and install the MonoDrive
Can retrofit existing systems – no need to pull the pump
NEMA 4 & NEMA 1 enclosure
Single-phase, 3-wire Franklin Electric motor
Features — SubDrive2W
■■
■■
■■
■■
■■
Selectable hp rating: (½, ¾, and 1 hp)
Easy retrofit installation – remove the pressure switch and install the SubDrive2W
Can retrofit existing systems – no need to pull the pump or motor
NEMA 3R enclosure
Single-phase, 2-wire Franklin Electric motor
Constant Pressure Controls Specifications
MonoDrive
(N1) 587 020 3110
Model No.
(Enclosure*) (N4) 587 020 3114
MonoDriveXT
587 020 4110
587 020 4114
Max Amps (RMS)
Power Factor
190-260 V 1-Phase
60/50 Hz
5.7 A (½ hp),
8.7 A (¾ hp),
11 A (1 hp)
1 (Constant)
190-260 V 1-Phase
60/50 Hz
13 A (1.5 hp),
16 A (2 hp)
1 (Constant)
Max Amps (RMS)
Variable/1-Phase
Variable (30-60 Hz)
4.0 A (½ hp),
6.6 A (¾ hp),
9.0 A (1 hp)
Variable/1-Phase
Variable (30-60 Hz)
½, ¾ or 1 hp
(Selectable)
½, ¾ or 1 hp,
230 VAC (1-Phase)
1.5 or 2 hp
(Selectable)
1.5 or 2 hp,
230 VAC (1-Phase)
10 A (1.5 hp),
12 A (2 hp)
For Use With:
Pump Rating
Motor Rating
Pressure Sensor
External
(Included)
(N1) 15.00 lbs (6.80 kg)
Controller
Weight
(N4) 24.14 lbs (10.95 kg)
Carton Size
(H x W x D)
Shipping
Weight
External
17.50 lbs (7.94 kg)
28.32 lbs (12.84 kg)
161 ⁄2 x 12 3 ⁄8 x 9”
41.9 x 31.4 x 22.9 cm
171 ⁄2 x 16 3 ⁄8 x 113 ⁄8”
(N4)
44.5 x 41.6 x 28.9 cm
161 ⁄2 x 12 3 ⁄8 x 9”
41.9 x 31.4 x 22.9 cm
171 ⁄2 x 16 3 ⁄8 x 113 ⁄8”
44.5 x 41.6 x 28.9 cm
(N1) 19.23 lbs (8.72 kg)
(N4) 30.91 lbs (14.02 kg)
21.28 lbs (9.65 kg)
35.09 lbs (15.92 kg)
(N1)
*N1 = NEMA 1 (Indoors), N4 = NEMA 4 (Outdoors), N3R = NEMA 3R (Outdoors)
124
Voltage
Frequency
Max Amps (RMS)
Power Factor
207-253 V 1-Phase
60/50 Hz
<12 A
N/A
Output (To Motor)
Voltage
Output (To Motor)
Voltage
Frequency
(N3R) 587 020 3223
Input (From Power Source)
Voltage
Frequency
SubDrive2W
Model No.
(Enclosure*)
Frequency
Max Amps (RMS)
Variable/1-Phase/FE
Motor
Variable (30-60 Hz)
6.0 A (½ hp),
8.0 A (¾ hp),
9.8 A (1 hp)
For Use With:
Pump Rating
Motor Rating
Pressure Sensor
(Included)
Controller Weight
Carton Size
(H x W x D)
Shipping Weight
½, ¾ or 1 hp
(Selectable)
½, ¾ or 1 hp,
230 VAC (1-Phase), 60 Hz
External
15.00 lbs (6.80 kg)
121 ⁄4 x 161 ⁄2 x 9”
31.1 x 41.9 x 22.9 cm
18.00 lbs (8.2 kg)
SubDrive/MonoDrive
Features — SubDrive75, SubDrive100, SubDrive150 & SubDrive300
■■
Works with a standard three-phase Franklin Electric submersible motor
■■
NEMA 4 & NEMA 1 enclosure
■■
Three-phase performance with single-phase input
High starting torque
More efficient
●● Smooth running
●●
●●
Constant Pressure Controls Specifications
SubDrive75
Model No.
(Enclosure*)
SubDrive100
SubDrive150
SubDrive300
587 020 4100
587 020 4104
587 020 4150
587 020 4154
N/A
587 020 6300
190-260 V 1-Phase
60/50 Hz
11 A
1 (Constant)
190-260 V 1-Phase
60/50 Hz
19 A
1 (Constant)
190-260 V 1-Phase
60/50 Hz
23 A
1 (Constant)
190-260 V 1-Phase
60/50 Hz
36 A
1 (Constant)
Variable/3-Phase
Variable (30-80 Hz)
5.9 A
Variable/3-Phase
Variable (30-80 Hz)
8.1 A
Variable/3-Phase
Variable (30-80 Hz)
10.9 A
Variable/3-Phase
Variable (30-80 Hz)
17.8 A
¾, 1 or 1.5 hp
(Selectable)
1.5 hp, 230 VAC
(3-Phase)
1, 1.5 or 2 hp
(Selectable)
2 hp, 230 VAC
(3-Phase)
1.5, 2 or 3 hp
(Selectable)
3 hp, 230 VAC
(3-Phase)
3 or 5 hp
(Selectable)
5 hp, 230 VAC
(3-Phase)
External
External
External
17.50 lbs (7.94 kg)
28.32 lbs (12.84 kg)
17.50 lbs (7.94 kg)
28.32 lbs (12.84 kg)
N/A
35.15 lbs (15.94 kg)
161 ⁄2 x 12 3 ⁄8 x 9”
41.9 x 31.4 x 22.9 cm
171 ⁄2 x 16 3 ⁄8 x 113 ⁄8”
(N4)
44.5 x 41.6 x 28.9 cm
161 ⁄2 x 12 3 ⁄8 x 9”
41.9 x 31.4 x 22.9 cm
171 ⁄2 x 16 3 ⁄8 x 113 ⁄8”
44.5 x 41.6 x 28.9 cm
161 ⁄2 x 12 3 ⁄8 x 9”
41.9 x 31.4 x 22.9 cm
171 ⁄2 x 16 3 ⁄8 x 113 ⁄8”
44.5 x 41.6 x 28.9 cm
197 ⁄8 x 171 ⁄2 x 141 ⁄4”
50.5 x 44.5 x 36.2 cm
(N1) 19.23 lbs (8.72 kg)
(N4) 30.91 lbs (14.02 kg)
21.28 lbs (9.65 kg)
35.09 lbs (15.92 kg)
21.28 lbs (9.65 kg)
35.09 lbs (15.92 kg)
N/A
40.95 lbs (18.57 kg)
(N1) 587 020 3380
(N4) 587 020 3384
Voltage
Frequency
Max Amps (RMS)
Power Factor
Output (To Motor)
Voltage
Frequency
Max Amps (RMS)
For Use With:
Pump Rating
Motor Rating
Pressure Sensor
External
(Included)
(N1) 15.00 lbs (6.80 kg)
Controller
Weight
(N4) 24.14 lbs (10.95 kg)
Carton Size
(H x W x D)
Shipping
Weight
(N1)
N/A
*N1 = NEMA 1 (Indoors), N4 = NEMA 4 (Outdoors)
125
SubDrive/MonoDrive
SubDrive300
D
A
G
H
I
F
E
B
J
C
NEMA 4 Dimensions (approximate)
NEMA 4
A
B
C
D
E
F
G
H
8.75"
12"
6"
15.34"
14"
14.75"
1.37"
Dimension
(22.23 cm) (30.48 cm) (15.24 cm) (38.96 cm) (35.56 cm) (37.47 cm) (3.48 cm)
Conduit Size
1
C A
SubDrive2W
D
Status
État
Estado
C
D
F
B
E
G*
Status
État
Estado
F
G*
NEMA 3R Dimensions (approximate)
NEMA 3R
Dimension
Conduit Size
A
6.20"
(15.75 cm)
-
* Use knock-outs as required.
126
B
C
14.27"
9.91"
(36.25 cm) (25.71 cm)
-
J
1.71"
4.75"
(4.34 cm) (12.07 cm)
1¼
-
E
B
A
I
0.885"
(2.25 cm)
½
D
E
.44"
(1.12 cm)
-
11.87"
(30.15 cm)
-
F
G
5.5"
.88" / 1.13"
(13.97 cm) (2.24 cm) / (2.87 cm)
½/¾
SubDrive/MonoDrive
SubDrive75/100/150/MonoDrive/MonoDriveXT
A
H*
G*
B F
E
C
D
I*
NEMA 4
Dimension
Conduit Size
A
B
C
D
E
F
7.25"
12.6"
7"
13.6"
12.5"
14.8"
(18.42 cm) (32.0 cm) (17.78 cm) (34.5 cm) (31.75 cm) (37.6 cm)
-
-
-
-
-
G
H
I
0.875" / 1.100"
(0.22 cm) /
(2.80 cm)
1.100" / 1.375"
(2.8 cm) /
(3.50 cm)
closed / 0.473" / 0.875"
closed /
(1.20 cm) / (2.22 cm)
½/¾
¾/1
½
-
SubDrive75/100/150/MonoDrive/MonoDriveXT
A
G
B
E
F
H
C
D
NEMA 1
Dimension
Conduit Size
A
B
C
D
E
F
G
H
5.25"
(13.34 cm)
-
11.5"
(29.21 cm)
-
5.5"
(13.97 cm)
-
9.75"
(24.77 cm)
-
12.8"
(32.51 cm)
-
14"
(35.56 cm)
-
1.12"
(2.84 cm)
¾
0.5"
(1.27 cm)
-
* Use knock-outs as required.
127
Constant Pressure Controllers
SubDrive Accessories
SubDrive Duplex Alternator
The SubDrive Alternator allows a water system to alternate between two
parallel pumps controlled by separate SubDrives or MonoDrives. The userselected switching interval balances the run time of each pump system
to evenly disperse the workload. In addition, when demand exceeds
the capacity of one pumping system, the other system comes online to
supplement production. The SubDrive Alternator can be used with any
SubDrive or MonoDrive controller.
Franklin Part Number: 585 001 2000
Pressure Setting*
Approximate Controller Size (NEMA 4)
Voltage
115 VAC
Frequency
60 Hz
Factory Preset
50 psi
Adjustment Range
25-80 psi
Outer Dimensions
5.8 x 5.8 x 3.6” (14.7 x 14.7 x 9.1 cm)
Weight
1.3 lbs (0.59 kg)
* Pressure sensors must be set at least 3 psi apart.
SubDrive/MonoDrive Fan Kits
Installers can remove the fan and make an attempt to clean the fan by
removing any particles that may restrict movement. In applications where
the fan cannot be cleaned or freed from particles, or is damaged or
malfunctioning, the fan replacement kit is an easy and inexpensive fix.
NEMA 1
NEMA 4
Controller
Kit Part Number
MonoDrive
SubDrive75
225 635 901
MonoDriveXT
SubDrive100
SubDrive150
225 635 902
SubDrive300
External cooling fans
225 635 903
Internal stirring fan
225 635 904
NEMA 3R
128
Controller
Kit Part Number
SubDrive2W
225 635 910
Controller
Size
Kit Part Number
SubDrive75 and MonoDrive
3.15 in. (80 mm)*
225 635 905
SubDrive75 and MonoDrive
3.62 in. (92 mm)*
225 635 908
SubDrive100/150 and MonoDriveXT
3.15 in. (80 mm)*
225 635 907
SubDrive100/150 and MonoDriveXT
3.62 in. (92 mm)*
225 635 909
* Outside measurement of fan
Constant Pressure Controllers
SubDrive Accessories
Auxiliary Relay Communications Board
The Auxiliary Relay Communications Board is available for use with the
SubDrive/MonoDrive NEMA4 (excluding SubDrive300) constant pressure
controllers. The Auxiliary Relay Board provides run-indication relay contacts.
The relays can be used to communicate the state of the drive (running or idle)
to auxiliary equipment (water treatment) or to utilize multiple sensors (Tank
Drawdown Kit).
Franklin Part Number: 225755901
Tank Drawdown Kit
The Tank Drawdown Kit is available for use with the SubDrive2W, SubDrive300 and the SubDrive/MonoDrive
NEMA4 with an Auxiliary Relay Board installed utilizing the relay contacts. The kit is intended to allow the
SubDrive system to utilize water from a tank during low flow applications.
Heatsink Cover Kit
The heatsink cover kit is available for use with the SubDrive/MonoDrive Nema4 constant pressure controllers. The
kit is a grill to protect the top of the unit’s heat sink from intrusion from animials or debris when mounted outside.
Direct Burial Cable
The direct burial cable kits are for use with the SubDrive/MonoDrive constant pressure controllers as a connection to
the pressure sensors. The Direct Burial cable can be used for applications that require the sensor cable to be buried
and extends the allowable length of the pressure sensor connection from 100 ft (30.5 m) to 300 ft (91.5 m).
Description
Franklin Part Number
Direct Burial Kit - 10 ft (3 m)
225800901
Direct Burial Kit - 30 ft (9 m)
225800902
Direct Burial Kit - 100 ft (30.5 m)
225800903
129
REFERENCES
Friction Loss
PVC Schedule 80 IPS Plastic Pipe in Feet per 100 feet of pipe
Pipe
Size
GPM
1
2
3
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
125
150
175
1/2"
3/4"
1”
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
Head Vel Head Vel Head Vel Head Vel Head Vel Head Vel Head Vel Head Vel Head Vel
Loss (ft./s) Loss (ft./s) Loss (ft./s) Loss (ft./s) Loss (ft./s) Loss (ft./s) Loss (ft./s) Loss (ft./s) Loss (ft./s)
1.87
6.74
14.29
24.34
36.79
51.57
68.61
87.86
109.27
132.82
1.37
2.74
4.11
5.48
6.85
8.22
9.59
10.96
12.33
13.70
6" Pipe
0.03
0.62
0.03
0.68
0.04
0.74
0.04
0.80
0.05
0.86
0.06
0.92
0.07
0.98
0.07
1.05
0.08
1.11
0.09
1.17
0.01
1.23
0.15
1.54
0.21
1.85
0.28
2.15
0.42
1.52
3.21
5.47
8.27
11.59
15.43
19.75
24.57
29.86
35.63
41.86
55.69
71.31
88.69
107.80
0.74
1.48
2.23
2.97
3.71
4.45
5.19
5.94
6.68
7.42
8.16
8.90
10.39
11.87
13.36
14.84
0.12
0.44
0.93
1.59
2.40
3.36
4.47
5.73
7.12
8.66
10.33
12.14
16.15
20.68
25.72
31.26
37.29
43.81
50.81
58.29
66.23
0.45
0.89
1.34
1.78
2.23
2.68
3.12
3.57
4.01
4.46
4.91
5.35
6.24
7.14
8.03
8.92
9.81
10.70
11.60
12.49
13.38
0.03
0.25
0.01
0.11
0.50
0.05
0.23
0.75
0.10
0.39
1.00
0.18
0.59
1.25
0.27
0.82
1.50
0.38
1.09
1.75
0.50
1.40
2.00
0.64
1.74
2.25
0.80
2.12
2.50
0.97
2.53
2.75
1.16
2.97
3.00
1.36
3.95
3.50
1.81
5.06
4.00
2.32
6.30
4.50
2.89
7.65
5.00
3.51
9.13
5.50
4.19
10.72 6.00
4.92
12.44 6.50
5.71
14.27 7.00
6.55
16.21 7.50
7.44
21.57 8.75
9.89
27.62 10.00 12.67
0.18
0.36
0.54
0.73
0.91
1.09
1.27
1.45
1.63
1.82
2.00
2.18
2.54
2.90
3.27
3.63
3.99
4.36
4.72
5.08
5.45
6.35
7.26
0.01
0.03
0.05
0.08
0.11
0.14
0.18
0.23
0.28
0.33
0.39
0.52
0.67
0.83
1.01
1.20
1.41
1.64
1.88
2.13
2.84
3.63
0.22
0.33
0.43
0.54
0.65
0.76
0.87
0.98
1.09
1.20
1.30
1.52
1.74
1.96
2.17
2.39
2.61
2.83
3.04
3.26
3.80
4.35
0.01
0.02
0.03
0.04
0.06
0.08
0.01
0.12
0.14
0.16
0.22
0.28
0.34
0.42
0.50
0.59
0.68
0.78
0.89
1.18
1.51
0.23
0.30
0.38
0.45
0.53
0.61
0.68
0.76
0.83
0.91
1.06
1.21
1.36
1.51
1.67
1.82
1.97
2.12
2.27
2.65
3.03
0.01
0.02
0.02
0.03
0.03
0.04
0.05
0.06
0.07
0.09
0.12
0.14
0.17
0.20
0.23
0.26
0.30
0.40
0.51
0.24
0.29
0.34
0.39
0.44
0.49
0.53
0.58
0.68
0.78
0.87
0.97
1.07
1.17
1.26
1.36
1.46
1.70
1.94
0.04
0.04
0.05
0.06
0.07
0.08
0.10
0.13
0.56
0.61
0.67
0.73
0.78
0.84
0.98
1.12
34.36 11.25 15.76
8.17
4.52
4.89
1.88
3.41
0.64
2.19
0.17
1.26
5.49
6.55
7.70
8.93
10.24
11.64
13.12
14.68
16.32
18.03
19.83
29.98
42.02
5.44
2.28
3.78
5.98
2.72
4.16
6.52
3.20
4.54
7.07
3.71
4.92
7.61
4.25
5.30
8.15
4.83
5.68
8.70
5.45
6.06
9.24
6.09
6.43
9.78
6.77
6.81
10.33 7.49
7.19
10.87 8.23
7.57
13.59 12.45 9.46
16.31 17.45 11.35
23.21 13.25
0.77
0.92
1.09
1.26
1.45
1.64
1.85
2.07
2.30
2.54
2.80
4.23
5.93
7.89
2.43
2.67
2.91
3.16
3.40
3.64
3.89
4.13
4.37
4.61
4.86
6.07
7.29
8.50
0.20
0.24
0.28
0.33
0.38
0.43
0.48
0.54
0.60
0.66
0.73
1.01
1.54
2.05
1.40
1.53
1.67
1.81
1.95
2.09
2.23
2.37
2.51
2.65
2.79
3.49
4.19
4.88
41.76 12.51 19.16 9.08
49.82 13.76 22.85 9.99
58.53 15.01 26.85 10.89
31.14 11.80
35.72 12.71
40.59 13.62
45.74 14.52
51.18 15.43
56.89 16.34
62.88 17.25
69.15 18.16
Notes: Suction Velocities should not exceed 8 feet per second. Calculated using Williams and Hazen formula using C = 150.
130
REFERENCES
Friction Loss
Water in Feet per 100 feet of Steel Pipe
GPM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
32
34
36
38
40
42
44
46
48
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
Pipe Size 1/2"
Pipe Size 3/4"
Pipe Size 1"
Pipe Size 1-1/4"
Pipe Size 1-1/2"
Actual size 0.622
Actual size 0.824
Actual size 1.049
Actual size 1.38
Actual size 1.61
Vel
Vel
Vel
Vel
Vel
Vel
Vel
Vel
Vel
Vel
Head Friction
Head Friction
Head Friction
Head
Friction
Head Friction
(ft/sec)
(ft/sec)
(ft/sec)
(ft/sec)
(ft/sec)
(ft)
(ft)
(ft)
(ft)
(ft)
2.099
7.577
16.056
27.354
41.352
57.961
77.112
98.747
122.817
149.280
178.099
209.241
242.675
278.376
316.317
1.056
2.112
3.168
4.223
5.279
6.335
7.391
8.447
9.503
10.559
11.615
12.670
13.726
14.782
15.838
0.017
0.069
0.156
0.277
0.433
0.624
0.849
1.109
1.404
1.733
2.097
2.495
2.928
3.396
3.899
0.534
1.929
4.087
6.962
10.525
14.753
19.628
25.134
31.261
37.997
45.332
53.259
61.769
70.856
80.513
90.735
101.517
112.852
124.738
137.168
150.140
163.649
177.691
192.263
207.363
222.985
239.128
255.789
272.965
290.652
0.602
1.203
1.805
2.407
3.008
3.610
4.211
4.813
5.415
6.016
6.618
7.220
7.821
8.423
9.025
9.626
10.228
10.829
11.431
12.033
12.634
13.236
13.838
14.439
15.041
15.643
16.244
16.846
17.448
18.049
0.006
0.023
0.051
0.090
0.141
0.203
0.276
0.360
0.456
0.563
0.681
0.810
0.951
1.103
1.266
1.440
1.626
1.823
2.031
2.250
2.481
2.723
2.976
3.241
3.516
3.803
4.101
4.411
4.731
5.063
0.165
0.596
1.263
2.151
3.252
4.558
6.064
7.765
9.657
11.738
14.004
16.453
19.082
21.889
24.873
28.031
31.362
34.863
38.535
42.375
46.383
50.556
54.894
59.396
64.061
68.887
73.874
79.021
84.327
89.791
101.191
113.215
125.857
139.112
152.975
167.442
182.507
198.168
214.420
231.259
275.904
324.147
375.943
431.249
490.027
552.241
617.860
686.852
759.190
834.846
0.371
0.742
1.114
1.485
1.856
2.227
2.599
2.970
3.341
3.712
4.083
4.455
4.826
5.197
5.568
5.940
6.311
6.682
7.053
7.425
7.796
8.167
8.538
8.909
9.281
9.652
10.023
10.394
10.766
11.137
11.879
12.622
13.364
14.107
14.849
15.592
16.334
17.076
17.819
18.561
20.417
22.274
24.130
25.986
27.842
29.698
31.554
33.410
35.267
37.123
0.002
0.009
0.019
0.034
0.054
0.077
0.105
0.137
0.173
0.214
0.259
0.308
0.362
0.420
0.482
0.548
0.619
0.694
0.773
0.857
0.945
1.037
1.133
1.234
1.339
1.448
1.561
1.679
1.801
1.928
2.193
2.476
2.776
3.093
3.427
3.778
4.147
4.532
4.935
5.355
6.479
7.711
9.049
10.495
12.048
13.708
15.475
17.349
19.331
21.419
0.043
0.157
0.332
0.566
0.856
1.200
1.597
2.045
2.543
3.091
3.688
4.333
5.025
5.764
6.550
7.381
8.258
9.181
10.148
11.159
12.214
13.313
14.455
15.641
16.869
18.140
19.453
20.809
22.206
23.645
26.647
29.813
33.142
36.633
40.283
44.093
48.060
52.184
56.463
60.898
72.654
85.358
98.997
113.561
129.039
145.422
162.701
180.869
199.918
219.840
262.281
308.142
357.380
409.955
465.831
0.215
0.429
0.644
0.858
1.073
1.287
1.502
1.716
1.931
2.145
2.360
2.574
2.789
3.003
3.218
3.432
3.647
3.861
4.076
4.290
4.505
4.719
4.934
5.148
5.363
5.577
5.792
6.006
6.221
6.435
6.864
7.293
7.722
8.151
8.580
9.009
9.438
9.867
10.296
10.725
11.798
12.870
13.943
15.015
16.088
17.160
18.233
19.305
20.378
21.450
23.595
25.740
27.885
30.030
32.175
0.001
0.003
0.006
0.011
0.018
0.026
0.035
0.046
0.058
0.072
0.087
0.103
0.121
0.140
0.161
0.183
0.207
0.232
0.258
0.286
0.315
0.346
0.378
0.412
0.447
0.483
0.521
0.561
0.601
0.644
0.732
0.827
0.927
1.033
1.144
1.261
1.384
1.513
1.648
1.788
2.163
2.574
3.021
3.504
4.023
4.577
5.167
5.793
6.454
7.151
8.653
10.298
12.086
14.016
16.090
0.021
0.074
0.157
0.268
0.404
0.567
0.754
0.966
1.201
1.460
1.742
2.047
2.374
2.723
3.094
3.487
3.901
4.337
4.793
5.271
5.769
6.288
6.828
7.388
7.968
8.569
9.189
9.829
10.489
11.169
12.587
14.082
15.655
17.304
19.028
20.827
22.701
24.649
26.671
28.765
34.319
40.319
46.762
53.641
60.952
68.691
76.853
85.435
94.433
103.843
123.890
145.553
168.811
193.645
220.039
0.158
0.315
0.473
0.630
0.788
0.946
1.103
1.261
1.418
1.576
1.734
1.891
2.049
2.206
2.364
2.521
2.679
2.837
2.994
3.152
3.309
3.467
3.625
3.782
3.940
4.097
4.255
4.413
4.570
4.728
5.043
5.358
5.673
5.989
6.304
6.619
6.934
7.249
7.564
7.880
8.668
9.456
10.244
11.032
11.820
12.607
13.395
14.183
14.971
15.759
17.335
18.911
20.487
22.063
23.639
0.000
0.002
0.003
0.006
0.001
0.014
0.019
0.025
0.031
0.039
0.047
0.056
0.065
0.076
0.087
0.099
0.112
0.125
0.139
0.154
0.170
0.187
0.204
0.222
0.241
0.261
0.281
0.303
0.325
0.347
0.395
0.446
0.500
0.557
0.618
0.681
0.747
0.817
0.889
0.965
1.168
1.390
1.631
1.891
2.171
2.470
2.789
3.127
3.484
3.860
4.671
5.559
6.524
7.566
8.685
Notes: Suction Velocities should not exceed 8 feet per second.
131
REFERENCES
Friction Loss
GPM
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
32
34
36
38
40
42
44
46
48
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
Pipe Size 2"
Pipe Size 2-1/2"
Pipe Size 3"
Pipe Size 3-1/2"
Actual size 2.067
Actual size 2.469
Actual size 3.068
Actual size 3.548
Vel
Vel Head
Vel
Vel Head
Vel
Vel Head
Vel
Vel Head
Friction
Friction
Friction
Friction
(ft/sec)
(ft)
(ft/sec)
(ft)
(ft/sec)
(ft)
(ft/sec)
(ft)
0.022
0.047
0.079
0.120
0.168
0.224
0.286
0.356
0.433
0.516
0.607
0.704
0.807
0.917
1.034
1.157
1.286
1.421
1.563
1.711
1.865
2.025
2.191
2.363
2.541
2.724
2.914
3.110
3.312
3.732
4.175
4.642
5.130
5.642
6.175
6.731
7.308
7.908
8.529
10.175
11.955
13.865
15.905
18.072
20.367
22.787
25.331
27.999
30.789
36.733
43.156
50.052
57.416
65.241
0.191
0.287
0.383
0.478
0.574
0.670
0.765
0.861
0.957
1.052
1.148
1.244
1.339
1.435
1.531
1.626
1.722
1.818
1.913
2.009
2.105
2.200
2.296
2.391
2.487
2.583
2.678
2.774
2.870
3.061
3.252
3.444
3.635
3.826
4.018
4.209
4.400
4.592
4.783
5.261
5.740
6.218
6.696
7.174
7.653
8.131
8.609
9.088
9.566
10.523
11.479
12.436
13.392
14.349
0.001
0.001
0.002
0.004
0.005
0.007
0.009
0.012
0.014
0.017
0.020
0.024
0.028
0.032
0.036
0.041
0.046
0.051
0.057
0.063
0.069
0.075
0.082
0.089
0.096
0.104
0.112
0.120
0.128
0.146
0.164
0.184
0.205
0.228
0.251
0.275
0.301
0.328
0.356
0.430
0.512
0.601
0.697
0.800
0.910
1.028
1.152
1.284
1.422
1.721
2.048
2.404
2.788
3.200
0.020
0.033
0.051
0.071
0.094
0.121
0.150
0.182
0.218
0.256
0.296
0.340
0.386
0.435
0.487
0.542
0.599
0.658
0.720
0.785
0.853
0.923
0.995
1.070
1.148
1.227
1.310
1.395
1.572
1.759
1.955
2.161
2.376
2.601
2.835
3.078
3.331
3.592
4.286
5.035
5.840
6.699
7.612
8.578
9.598
10.669
11.793
12.968
15.472
18.177
21.081
24.183
27.479
0.201
0.268
0.335
0.402
0.469
0.536
0.603
0.670
0.737
0.804
0.871
0.938
1.005
1.072
1.139
1.206
1.273
1.340
1.407
1.474
1.541
1.608
1.675
1.742
1.809
1.876
1.943
2.010
2.144
2.278
2.412
2.546
2.680
2.814
2.948
3.083
3.217
3.351
3.686
4.021
4.356
4.691
5.026
5.361
5.696
6.031
6.366
6.701
7.371
8.041
8.711
9.382
10.052
0.001
0.001
0.002
0.003
0.003
0.004
0.006
0.007
0.008
0.010
0.012
0.014
0.016
0.018
0.020
0.023
0.025
0.028
0.031
0.034
0.037
0.040
0.044
0.047
0.051
0.055
0.059
0.063
0.071
0.081
0.090
0.101
0.112
0.123
0.135
0.148
0.161
0.174
0.211
0.251
0.295
0.342
0.393
0.447
0.504
0.565
0.630
0.698
0.845
1.005
1.180
1.368
1.570
Notes: Suction Velocities should not exceed 8 feet per second.
132
0.018
0.025
0.033
0.042
0.052
0.063
0.076
0.089
0.103
0.118
0.134
0.151
0.169
0.188
0.208
0.229
0.250
0.273
0.296
0.321
0.346
0.372
0.399
0.427
0.455
0.485
0.546
0.611
0.679
0.751
0.826
0.904
0.985
1.070
1.158
1.248
1.490
1.750
2.030
2.328
2.646
2.981
3.336
3.708
4.099
4.507
5.377
6.317
7.327
8.405
9.550
0.217
0.260
0.304
0.347
0.391
0.434
0.477
0.521
0.564
0.608
0.651
0.694
0.738
0.781
0.825
0.868
0.911
0.955
0.998
1.042
1.085
1.128
1.172
1.215
1.259
1.302
1.389
1.476
1.562
1.649
1.736
1.823
1.910
1.996
2.083
2.170
2.387
2.604
2.821
3.038
3.255
3.472
3.689
3.906
4.123
4.340
4.774
5.208
5.642
6.076
6.510
0.001
0.001
0.001
0.002
0.002
0.003
0.004
0.004
0.005
0.006
0.007
0.007
0.008
0.009
0.011
0.012
0.013
0.014
0.015
0.017
0.018
0.020
0.021
0.023
0.025
0.026
0.030
0.034
0.038
0.042
0.047
0.052
0.057
0.062
0.067
0.073
0.089
0.105
0.124
0.143
0.165
0.187
0.212
0.237
0.264
0.293
0.354
0.422
0.495
0.574
0.659
0.009
0.012
0.016
0.021
0.026
0.031
0.037
0.044
0.051
0.058
0.066
0.075
0.083
0.093
0.103
0.113
0.123
0.135
0.146
0.158
0.171
0.183
0.197
0.210
0.224
0.239
0.269
0.301
0.335
0.370
0.407
0.446
0.486
0.527
0.571
0.616
0.734
0.863
1.001
1.148
1.304
1.470
1.644
1.828
2.021
2.222
2.651
3.114
3.612
4.144
4.708
0.162
0.195
0.227
0.260
0.292
0.325
0.357
0.389
0.422
0.454
0.487
0.519
0.552
0.584
0.617
0.649
0.681
0.714
0.746
0.779
0.811
0.844
0.876
0.909
0.941
0.974
1.038
1.103
1.168
1.233
1.298
1.363
1.428
1.493
1.558
1.623
1.785
1.947
2.109
2.272
2.434
2.596
2.758
2.921
3.083
3.245
3.570
3.894
4.219
4.543
4.868
0.000
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.003
0.003
0.004
0.004
0.005
0.005
0.006
0.007
0.007
0.008
0.009
0.009
0.010
0.011
0.012
0.013
0.014
0.015
0.017
0.019
0.021
0.024
0.026
0.029
0.032
0.035
0.038
0.041
0.050
0.059
0.069
0.080
0.092
0.105
0.118
0.133
0.148
0.164
0.198
0.236
0.277
0.321
0.368
REFERENCES
Pipe Fittings
Pipe Size
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
4-1/2"
5"
6"
Pipe Size
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
4-1/2"
5"
6"
Friction losses in terms of equivalent lengths of standard pipe
Standard 90 ° Elbow Long Radius Elbow
45 ° Elbow
Tee
1.5
2.2
2.7
3.7
4.3
5.5
6.5
8.1
9.5
11
12
14
16
1.1
1.4
1.7
2.4
2.8
3.5
4.2
5.1
6
7
7.9
8.9
11
0.77
1
1.3
1.6
2
2.5
3
3.8
4.4
5
5.6
6.1
7.7
3.4
4.5
5.8
7.8
9
11
14
17
19
22
24
27
33
Friction losses in terms of equivalent lengths of standard pipe
Gate Valve Open
Globe Valve Open
Angle Valve Open
0.35
0.47
0.6
0.8
0.95
1.2
1.4
1.7
2
2.3
2.6
2.9
3.5
16
22
27
37
44
57
66
85
99
110
130
140
160
Return Bend
8.4
12
15
18
22
28
33
42
50
58
61
70
83
3.8
5
6.1
8.5
10
13
15
18
21
24
27
31
37
Swing Check Valve
4
5
7
9
11
13
16
20
26
33
39
133
REFERENCES
Pressure Loss
Swing Check Valves
Flow
GPM
2
3
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
1/2"
0.2
.05
1.0
1.7
2.6
3.6
4.8
Pressure Loss (PSI)
Valve Size
3/4"
1"
1-1/4" 1-1/2"
0.3
0.5
0.8
1.1
1.5
2.0
2.4
3.0
3.5
4.1
4.8
0.3
0.5
0.6
0.9
1.0
1.2
1.4
1.7
2.0
2.2
2.5
2.9
3.2
3.6
3.9
4.3
4.7
0.4
0.5
0.6
0.7
0.8
0.9
1.1
1.2
1.3
1.5
1.6
1.7
1.9
0.4
0.5
0.5
0.6
0.6
0.7
0.8
0.8
0.9
1.0
Flow
GPM
2"
46
48
50
55
60
65
70
75
80
90
100
120
140
Pressure Loss (PSI)
Valve Size
1-1/4" 1-1/2"
2"
2-1/2"
3"
2.1
2.2
2.4
2.9
3.4
3.9
4.5
0.3
0.3
0.4
Bronze Gate Valves
Flow
GPM
1
2
5
8
10
15
20
30
40
50
60
80
100
120
140
160
134
1/2"
.01
.06
.16
.24
3/4"
.02
.05
.08
.17
.31
1"
.02
.03
.06
.11
.24
.43
.67
Pressure Loss (PSI)
Valve Size
1-1/4" 1-1/2"
2"
.01
.02
.03
.07
.13
.21
.30
.54
.01
.02
.04
.07
.11
.15
.28
.43
.62
.85
.01
.02
.04
.05
.10
.15
.22
.30
.40
2-1/2"
3"
.01
.02
.03
.05
.07
.10
.14
.18
.01
.02
.03
.04
.06
.07
4"
.02
.03
1.1
1.2
1.3
1.5
1.8
2.0
2.4
2.7
3.0
3.7
4.6
0.4
0.5
0.5
0.6
0.7
0.8
0.9
1.0
1.2
1.5
1.8
2.5
3.3
0.4
0.5
0.6
0.7
0.9
1.2
1.6
0.4
0.5
0.7
4"
REFERENCES
Pressure Loss
Water Meters - AWWA Standard
Flow
GPM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
90
100
110
120
130
140
150
5/8"
3/4"
0.2
0.3
0.4
0.6
0.9
1.3
1.8
2.3
3.0
3.7
4.4
5.1
6.1
7.2
8.3
9.4
10.7
12.0
13.4
15.0
0.1
0.2
0.3
0.5
0.6
0.7
0.8
1.0
1.3
1.6
1.9
2.2
2.6
3.1
3.6
4.1
4.6
5.2
5.8
6.5
7.9
9.5
11.2
13.0
15.0
1"
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.4
1.6
1.8
2.0
2.2
2.8
3.4
4.0
4.6
5.3
6.0
6.9
7.8
8.7
9.6
10.6
11.7
12.8
13.9
15.0
Pressure Loss
Normal Size
1-1/2"
0.4
0.5
0.6
0.7
0.8
1.0
1.2
1.4
1.6
1.8
2.1
2.4
2.7
3.0
3.3
3.6
3.9
4.2
4.5
4.9
5.3
5.7
6.2
6.7
7.2
8.3
9.8
11.3
12.8
16.1
20.0
2"
3"
4"
0.7
0.8
0.9
1.0
1.2
1.3
1.4
1.5
1.6
1.7
1.9
2.1
2.2
2.3
2.5
2.7
3.2
3.7
4.3
4.9
6.2
7.8
9.5
11.3
13.0
15.1
17.3
1.0
1.1
1.3
1.5
1.6
2.0
2.5
2.9
3.4
3.9
4.5
5.1
0.7
0.8
0.9
1.0
1.2
1.4
1.6
1.8
135
REFERENCES
Pressure Tank Sizing
Pressure Tank Selection Chart - Minimum tank volumes for proper system life
Pump
Capacity
Minimum
Drawdown
GPH
GPM
Gallons
A
20-40
B
C
240
300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
1560
1620
1680
1740
1800
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
4
5
6
7
8
9
10
12
13
15
17
19
20
23
25
27
30
33
36
38
41
44
47
50
53
57
60
10
15
15
20
20
25
30
35
35
40
45
50
55
6
70
75
80
90
100
105
110
120
130
135
145
155
165
15
15
20
20
25
25
30
35
40
45
50
55
55
65
70
75
85
90
100
105
115
120
130
140
145
160
165
25
30
40
45
50
60
65
80
85
100
110
125
160
150
160
175
195
215
235
345
365
385
305
325
345
370
390
Notes:
A - Bladder or Diaphragm Tank Design
B - Floating Wafer Tank Design
C - Plain Steel Tank Design
136
Total Tank Volume (Gallons)
Switch Setting (PSI)
30-50
A
B
C
15
15
20
35
35
30
30
40
40
50
55
60
65
75
80
85
95
105
115
125
135
140
150
160
170
185
195
15
20
20
25
25
30
35
40
45
50
55
65
65
75
85
90
100
110
120
125
135
145
155
165
175
185
195
40
50
60
70
80
90
100
120
130
150
170
190
200
230
250
270
300
330
360
380
410
440
470
500
530
570
600
A
40-60
B
C
15
20
20
25
30
35
40
45
50
55
65
70
75
85
95
100
110
125
135
140
155
165
175
185
200
215
225
15
20
25
30
30
35
40
45
50
60
65
75
75
90
95
105
115
125
135
145
155
165
180
190
200
215
225
55
70
85
100
110
125
140
165
180
210
235
265
280
320
350
375
415
460
500
530
570
610
655
700
735
790
835
REFERENCES
Reference Tables
Equivalent Values of Pressure
Inches of
Mercury
Feet of Water
PSI
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
29.929
1.13
2.26
3.39
4.52
5.65
6.78
7.91
9.04
10.17
11.3
12.45
13.57
14.7
15.82
16.96
18.09
19.22
20.35
21.75
22.6
23.78
24.88
26
27.15
26.26
29.4
30.52
31.65
32.8
33.947
0.49
0.98
1.47
1.95
2.44
2.93
3.42
3.91
4.4
4.89
5.39
5.87
6.37
6.86
7.35
7.84
8.33
8.82
9.31
9.8
10.3
10.8
11.28
11.75
12.25
12.73
13.23
13.73
14.22
14.697
Properties of Water
Temp. of
Water (ºF)
Pressure
(ft Water)
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
212
0.59
0.84
1.17
1.61
2.19
2.94
3.91
5.14
6.67
8.58
10.9
13.8
17.3
21.6
26.6
32.6
34
Atmospheric Pressure at Various Elevations
Altitude
Feet Above
Sea Level
Pounds per
Square Inch (PSI)
Atmospheric Pressure
Feet of
Water
Inches of
Mercury
Sea Level
500
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
14.7
14.4
14.2
13.7
13.2
12.7
12.2
11.8
11.3
10.9
10.5
10.1
33.8
33.3
32.6
31.4
30.3
29.2
28.2
27.1
26.1
25.1
24.2
23.2
29.9
29.4
28.8
27.8
26.8
25.8
24.9
24
23.1
22.2
21.4
20.6
137
REFERENCES
Conversions
To Convert From
PSI
PSI
Feet
Feet
Feet
Inches of Mercury
Meters
Kilograms per sq. in.
ATM
ATM
ATM
To Convert From
Gallons
Gallons
Gallons
Gallons
Liters
Barrel (Oil)
Cubic Feet
Cubic Feet
Acre Foot
Acre Foot
Acre Inch
Acre Inch
To Convert From
Gallons Per Minute
Gallons Per Minute
Gallons Per Minute
Gallons Per Minute
Gallons Per Minute
Cubic Meters/Hr.
Cubic Meters/Hr.
Cubic Feet/Sec.
Acre Foot
Acre Foot per Day
Acre Inch per Hour
Liter per Second
Miner’s Inch (ID,KS,NE,
NM,ND,SD,UT,WA)
Miner’s Inch
(AZ,CA,MT,NV,OR)
138
Head
To
Feet
Inches of Mercury
PSI
Meters
Inches of Mercury
Feet of Water
Feet
PSI
PSI
Feet of Water
Meters of Water
Volume
To
Liters
Cubic Inches
Cubic Feet
Cubic Meters
Gallons
Gallons
Gallons
Cubic Meters
Cubic Feet
Gallons
Cubic Feet
Gallons
Capacity
To
Multiply By
To Convert From
2.31
2.04
0.433
0.305
0.885
1.132
3.28
14.22
14.7
34
10.35
H.P.
H.P.
H.P.
Kilowatts
To Convert From
Inches
Meters
Miles
Rods
Multiply By
To Convert From
3.785
231
0.137
0.004
0.264
42
7.48
0.028
43560
325829
3630
27100
Gallons
Cubic Feet of Water
Kilograms
Multiply By
Liters/Sec.
Liters/Hr.
Cubic Meters/Hr.
Cubic Feet/Sec.
Pounds Per Hour
Gallons Per Minute
Liters/Sec.
Gallons Per Minute
Gallons
Gallons Per Minute
Gallons Per Minute
Gallons Per Minute
0.063
227.1
0.227
0.002
500
4.402
0.278
448.831
325.85
227
454
15.85
Gallons Per Minute
9
Gallons Per Minute
11.22
To Convert From
Fahrenheit
Celsius
Horsepower
To
Kilowatts
Ft. lbs. per minute
Ft. lbs. per second
H.P.
Length
To
Centimeters
Feet
Feet
Feet
Weight
To
Pounds
Pounds
Pounds
Temperature
To
Celsius
Fahrenheit
Multiply By
0.746
33000
550
1.341
Multiply By
2.54
3.28
5280
16.5
Multiply By
8.33
62.35
2.2
Multiply By
5/9 X (oF-32)
9/5 X (oC + 32)
1,000,000 US gal./day = 695 US gal./minute
WARRANTY INFORMATION
Lost or Damaged Goods
IMPORTANT
Every carrier used by Franklin Electric, Inc. is required to verify and sign for the condition of and the number of pieces
that are released to them for delivery. Our control and responsibility for any shipment ceases when the carrier signs
the Bill of Lading. When you sign the Bill of Lading, you legally assume responsibility of the shipment being delivered.
Please, thoroughly inspect each shipment immediately upon arrival.
If cartons, packages, or crates are received in short or damaged condition, it is important that you notify the driver
and insist on a notation of the loss or damage across the face of the freight bill. Failure to do this could negate any
opportunity you have to file a claim. Claims for short or damaged material must be filed in writing with the carrier
immediately after delivery.
If concealed loss or damage is discovered, notify the carrier at once and request an inspection. It is also important
that you do not discard the shipping carton or container. A concealed damage report should be made within ten
(10) days of delivery of the shipment. The carrier’s agent will make an inspection and usually will grant a concealed
damage notation. If you give the carrier a clear receipt for the goods that have been damaged in transit, you do so
at your own risk and expense.
We are willing to assist you to collect claims for loss or damage, but we are not responsible for collection of claims or
replacement of material (shortage or damage) if not noted on the Bill of Lading at the time of delivery.
Due to frequent damage of heavy UPS shipments, Franklin Electric, Inc. does not ship orders over 75 lbs. by UPS unless
customer agrees to take full responsibility.
FOR INFORMATION OR ASSISTANCE CONTACT:
Customer Service Department
800.269.0063
139
REFERENCES
Limited Warranty
THIS WARRANTY SETS FORTH THE COMPANY’S SOLE OBLIGATION AND PURCHASER’S EXCLUSIVE REMEDY FOR DEFECTIVE PRODUCT
Franklin Electric Company, Inc. and its subsidiaries (hereafter “the Company”) warrants that the products accompanied by
this warranty are free from defects in material or workmanship of the Company.
The Company has the right to inspect any product returned under warranty to confirm that the product contains a defect in
material or workmanship. The Company shall have the sole right to choose whether to repair or replace defective equipment,
parts, or components.
The buyer should return the product to the place of purchase for warranty consideration. Subject to the terms and conditions
listed below, the Company will repair or replace to the buyer any portion of this product which proves defective due to
materials or workmanship of the Company.
The Company will consider products for warranty for 12 months from the date of installation or for 24 months from the date
of manufacture, whichever occurs first.
The Company shall IN NO EVENT be responsible or liable for the cost of field labor or other charges incurred by any customer in
removing and/or affixing any product, part or component thereof.
The Company reserves the right to change or improve its products or any portions thereof without being obligated to provide
such change or improvement to previously sold products.
THIS WARRANTY DOES NOT APPLY TO products damaged by acts of God, including lightning, normal wear and tear, normal
maintenance services and the parts used in connection with such service, or any other conditions beyond the control of the
Company.
THIS WARRANTY WILL IMMEDIATELY VOID if any of the following conditions are found:
1. Product is used for purposes other than those for which it was designed and manufactured;
2. Product was not installed in accordance with applicable codes, ordinances and good trade practices;
3. Product was not installed by a Franklin Certified Contractor; or
4. Product was damaged as a result of negligence, abuse, accident, misapplication, tampering, alteration, improper installation, operation, maintenance or storage, nor to an excess of recommended maximums as set forth in the
product instructions.
NEITHER SELLER NOR THE COMPANY SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE, DIRECT, INCIDENTAL OR
CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES,
INJURY TO PERSON OR PROPERTY, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS), ARISING OUT OF THE USE OR THE
INABILITY TO USE THE PRODUCT, AND THE BUYER AGREES THAT NO OTHER REMEDY SHALL BE AVAILABLE TO IT.
THE WARRANTY AND REMEDY DESCRIBED IN THIS LIMITED WARRANTY IS AN EXCLUSIVE WARRANTY AND REMEDY AND IS IN LIEU
OF ANY OTHER WARRANTY OR REMEDY, EXPRESS OR IMPLIED, WHICH OTHER WARRANTIES AND REMEDIES ARE HEREBY EXPRESSLY
EXCLUDED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, TO THE EXTENT EITHER APPLIES TO A PRODUCT SHALL BE LIMITED IN DURATION TO THE PERIODS OF THE EXPRESSED
WARRANTIES GIVEN ABOVE.
DISCLAIMER: Any oral statements about the product made by the seller, the Company, the representatives or any other parties,
do not constitute warranties, shall not be relied upon by the buyer, and are not part of the contract for sale. Seller’s and the
Company’s only obligation, and buyer’s only remedy, shall be the replacement and/or repair by the Company of the product
as described above. Before using, the user shall determine the suitability of the product for his intended use, and user assumes
all risk and liability whatsoever in connection therewith.
Some states and countries do not allow the exclusion or limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages, so the above exclusion or limitations may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.
140
9255 Coverdale Road, Fort Wayne, Indiana 46809
PH: 260.824.2900 FAX: 260.824.2909
MH2009 01-14

professional water systems equipment

Transcription

Similar documents