Cedar Millwork Products

Cedar Millwork Products
1
BUILD SOME CHARACTER
Edmund Allen’s Cedar millwork products will set your design apart
by adding the beauty, warmth, elegance of design, and functionality
only natural Western Red Cedar can provide.
Fine Cedar Detailing—It Shows!
2
Cedar
Millwork Products
Corbels
n Brackets
n Light Blocks
n Gable Vents
n Rafter Tails
n Decorative
n
Trusses
Use Our Designs or Yours
Our millwork operations are set up to perform custom work.
We invite you to send us your drawings or plans. Over a century
of experience and our vast array of modern millwork equipment
ensure that we are able to produce even the most challenging of
designs. We take pride in delivering a higher standard, and we’ll
work with you to accomplish your objectives on time and on
budget. Edmund Allen Cedar millwork products complement
your architecture, beautifully!
3
Cedar Millwork Products
CORBELS
CA
CB
CC
CA 4810 R
(3.5” x 8” x 10” Rough)
CB 4810 R
(3.5” x 8” x 10” Rough)
CC 4810 R
(3.5” x 8” x 10” Rough)
CA 41012 R
(3.5” x 10” x 12” Rough)
CB 41012 R
(3.5” x 10” x 12” Rough)
CC 41012 R
(3.5” x 10” x 12” Rough)
CA 41215 R
(3.5” x 12” x 15” Rough)
CB 41215 R
(3.5” x 12” x 15” Rough)
CC 41215 R
(3.5” x 12” x 15” Rough)
CA 4810 S
(3.5” x 8” x 10” Smooth)
CB 4810 S
(3.5” x 8” x 10” Smooth)
CC 4810 S
(3.5” x 8” x 10” Smooth)
CA 41012 S
(3.5” x 10” x 12” Smooth)
CB 41012 S
(3.5” x 10” x 12” Smooth)
CC 41012 S
(3.5” x 10” x 12” Smooth)
CA 41215 S
(3.5” x 12” x 15” Smooth)
CB 41215 S
(3.5” x 12” x 15” Smooth)
CC 41215 S
(3.5” x 12” x 15” Smooth)
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
Custom Sizes and
Designs Available
Factory Applied
Coatings Available
4
Edmund Allen Lumber Co.
•
p: 800.892.1884
•
X = Thickness
Available in 3.5”, 5.5” and 7.5”
Contact our sales department to
speak with one of our cedar design
representatives regarding your
project requirements.
f: 815.472.3976
•
CD
CD 488 R
(3.5” x 8” x 8” Rough)
CD 4810 R
(3.5” x 8” x 10” Rough)
CD 41012 R
(3.5” x 10” x 12” Rough)
CD 41215 R
(3.5” x 12” x 15” Rough)
CD 488 S
(3.5” x 8” x 8” Smooth)
CD 4810 S
(3.5” x 8” x 10” Smooth)
CD 41012 S
(3.5” x 10” x 12” Smooth)
CD 41215 S
(3.5” x 12” x 15” Smooth)
X = Thickness
Available in 3.5”, 5.5” and 7.5”
1-800-892-1884
View all of our products online at www.edmundallen.com
Cedar Millwork Products
CORBELS
CE
CF
CG
CH
CE 4810 R
(3.5” x 8” x 10” Rough)
CF 4810 R
(3.5” x 8” x 10” Rough)
CG 4810 R
(3.5” x 8” x 10” Rough)
CH 4810 R
(3.5” x 8” x 10” Rough)
CE 41012 R
(3.5” x 10” x 12” Rough)
CF 41012 R
(3.5” x 10” x 12” Rough)
CG 41012 R
(3.5” x 10” x 12” Rough)
CH 41012 R
(3.5” x 10” x 12” Rough)
CE 41215 R
(3.5” x 12” x 15” Rough)
CF 41215 R
(3.5” x 12” x 15” Rough)
CG 41215 R
(3.5” x 12” x 15” Rough)
CH 41215 R
(3.5” x 12” x 15” Rough)
CE 4810 S
(3.5” x 8” x 10” Smooth)
CF 4810 S
(3.5” x 8” x 10” Smooth)
CG 4810 S
(3.5” x 8” x 10” Smooth)
CH 4810 S
(3.5” x 8” x 10” Smooth)
CE 41012 S
(3.5” x 10” x 12” Smooth)
CF 41012 S
(3.5” x 10” x 12” Smooth)
CG 41012 S
(3.5” x 10” x 12” Smooth)
CH 41012 S
(3.5” x 10” x 12” Smooth)
CE 41215 S
(3.5” x 12” x 15” Smooth)
CF 41215 S
(3.5” x 12” x 15” Smooth)
CG 41215 S
(3.5” x 12” x 15” Smooth)
CH 41215 S
(3.5” x 12” x 15” Smooth)
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
Custom Sizes and
Designs Available
Factory Applied
Coatings Available
Edmund Allen Lumber Co.
•
p: 800.892.1884
•
f: 815.472.3976
X = Thickness
Available in 3.5”, 5.5” and 7.5”
Contact our sales department to
speak with one of our cedar design
representatives regarding your
project requirements.
•
X = Thickness
Available in 3.5”, 5.5” and 7.5”
1-800-892-1884
View all of our products online at www.edmundallen.com
5
Cedar Millwork Products
CORBELS
CI
CJ
CK
CI 4810 R
(3.5” x 8” x 10” Rough)
CJ 4810 R
(3.5” x 8” x 10” Rough)
CK 4810 R
(3.5” x 8” x 10” Rough)
CL 4810 R
(3.5” x 8” x 10” Rough)
CI 41012 R
(3.5” x 10” x 12” Rough)
CJ 41012 R
(3.5” x 10” x 12” Rough)
CK 41012 R
(3.5” x 10” x 12” Rough)
CL 41012 R
(3.5” x 10” x 12” Rough)
CI 41215 R
(3.5” x 12” x 15” Rough)
CJ 41215 R
(3.5” x 12” x 15” Rough)
CK 41215 R
(3.5” x 12” x 15” Rough)
CL 41215 R
(3.5” x 12” x 15” Rough)
CI 4810 S
(3.5” x 8” x 10” Smooth)
CJ 4810 S
(3.5” x 8” x 10” Smooth)
CK 4810 S
(3.5” x 8” x 10” Smooth)
CL 4810 S
(3.5” x 8” x 10” Smooth)
CI 41012 S
(3.5” x 10” x 12” Smooth)
CJ 41012 S
(3.5” x 10” x 12” Smooth)
CK 41012 S
(3.5” x 10” x 12” Smooth)
CL 41012 S
(3.5” x 10” x 12” Smooth)
CI 41215 S
(3.5” x 12” x 15” Smooth)
CJ 41215 S
(3.5” x 12” x 15” Smooth)
CK 41215 S
(3.5” x 12” x 15” Smooth))
CL 41215 S
(3.5” x 12” x 15” Smooth)
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
Custom Sizes and
Designs Available
Factory Applied
Coatings Available
6
CL
Edmund Allen Lumber Co.
•
p: 800.892.1884
•
X = Thickness
Available in 3.5”, 5.5” and 7.5”
Contact our sales department to
speak with one of our cedar design
representatives regarding your
project requirements.
f: 815.472.3976
•
X = Thickness
Available in 3.5”, 5.5” and 7.5”
1-800-892-1884
View all of our products online at www.edmundallen.com
Cedar Millwork Products
BRACKETS
BA
BB
BC
BD
BA 4624 R
(3.5” x 6” x 24” Rough)
BB 4624 R
(3.5” x 6” x 24” Rough)
BC 4624 R
(3.5” x 6” x 24” Rough)
BD 4624 R
(3.5” x 6” x 24” Rough)
BA 6624 R
(5.5” x 6” x 24” Rough)
BB 6624 R
(5.5” x 6” x 24” Rough)
BC 6624 R
(5.5” x 6” x 24” Rough)
BD 6624 R
(5.5” x 6” x 24” Rough)
BA 8624 R
(7.5” x 6” x 24” Rough)
BB 8624 R
(7.5” x 6” x 24” Rough)
BC 8624 R
(7.5” x 6” x 24” Rough)
BD 8624 R
(7.5” x 6” x 24” Rough)
BA 4624 S
(3.5” x 6” x 24” Smooth)
BB 4624 S
(3.5” x 6” x 24” Smooth)
BC 4624 S
(3.5” x 6” x 24” Smooth)
BD 4624 S
(3.5” x 6” x 24” Smooth)
BA 6624 S
(5.5” x 6” x 24” Smooth)
BB 6624 S
(5.5” x 6” x 24” Smooth)
BC 6624 S
(5.5” x 6” x 24” Smooth)
BD 6624 S
(5.5” x 6” x 24” Smooth)
BA 8624 S
(7.5” x 6” x 24” Smooth)
BB 8624 S
(7.5” x 6” x 24” Smooth)
BC 8624 S
(7.5” x 6” x 24” Smooth)
BD 8624 S
(7.5” x 6” x 24” Smooth)
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
Custom Sizes and
Designs Available
Factory Applied
Coatings Available
Edmund Allen Lumber Co.
•
p: 800.892.1884
•
f: 815.472.3976
Contact our sales department to
speak with one of our cedar design
representatives regarding your
project requirements.
•
1-800-892-1884
View all of our products online at www.edmundallen.com
7
Cedar Millwork Products
BRACKETS
BE
BF
BG
BH
BE 4624 R
(3.5” x 6” x 24” Rough)
BF 4624 R
(3.5” x 6” x 24” Rough)
BG 4624 R
(3.5” x 6” x 24” Rough)
BH 4624 R
(3.5” x 6” x 24” Rough)
BE 6624 R
(5.5” x 6” x 24” Rough)
BF 6624 R
(5.5” x 6” x 24” Rough)
BG 6624 R
(5.5” x 6” x 24” Rough)
BH 6624 R
(5.5” x 6” x 24” Rough)
BE 8624 R
(7.5” x 6” x 24” Rough)
BF 8624 R
(7.5” x 6” x 24” Rough)
BG 8624 R
(7.5” x 6” x 24” Rough)
BH 8624 R
(7.5” x 6” x 24” Rough)
BE 4624 S
(3.5” x 6” x 24” Smooth)
BF 4624 S
(3.5” x 6” x 24” Smooth)
BG 4624 S
(3.5” x 6” x 24” Smooth)
BH 4624 S
(3.5” x 6” x 24” Smooth)
BE 6624 S
(5.5” x 6” x 24” Smooth)
BF 6624 S
(5.5” x 6” x 24” Smooth)
BG 6624 S
(5.5” x 6” x 24” Smooth)
BH 6624 S
(5.5” x 6” x 24” Smooth)
BE 8624 S
(7.5” x 6” x 24” Smooth)
BF 8624 S
(7.5” x 6” x 24” Smooth)
BG 8624 S
(7.5” x 6” x 24” Smooth)
BH 8624 S
(7.5” x 6” x 24” Smooth)
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
Custom Sizes and
Designs Available
Factory Applied
Coatings Available
8
Edmund Allen Lumber Co.
•
p: 800.892.1884
•
Contact our sales department to
speak with one of our cedar design
representatives regarding your
project requirements.
f: 815.472.3976
•
1-800-892-1884
View all of our products online at www.edmundallen.com
Cedar Millwork Products
BRACKETS
BI
BJ
BK
BL
BI 4624 R
(3.5” x 6” x 24” Rough)
BJ 4624 R
(3.5” x 6” x 24” Rough)
BK 4624 R
(3.5” x 6” x 24” Rough)
BL 4624 R
(3.5” x 6” x 24” Rough)
BI 6624 R
(5.5” x 6” x 24” Rough)
BJ 6624 R
(5.5” x 6” x 24” Rough)
BK 6624 R
(5.5” x 6” x 24” Rough)
BL 6624 R
(5.5” x 6” x 24” Rough)
BI 8624 R
(7.5” x 6” x 24” Rough)
BJ 8624 R
(7.5” x 6” x 24” Rough)
BK 8624 R
(7.5” x 6” x 24” Rough)
BL 8624 R
(7.5” x 6” x 24” Rough)
BI 4624 S
(3.5” x 6” x 24” Smooth)
BJ 4624 S
(3.5” x 6” x 24” Smooth)
BK 4624 S
(3.5” x 6” x 24” Smooth)
BL 4624 S
(3.5” x 6” x 24” Smooth)
BI 6624 S
(5.5” x 6” x 24” Smooth)
BJ 6624 S
(5.5” x 6” x 24” Smooth)
BK 6624 S
(5.5” x 6” x 24” Smooth)
BL 6624 S
(5.5” x 6” x 24” Smooth)
BI 8624 S
(7.5” x 6” x 24” Smooth)
BJ 8624 S
(7.5” x 6” x 24” Smooth)
BK 8624 S
(7.5” x 6” x 24” Smooth)
BL 8624 S
(7.5” x 6” x 24” Smooth)
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
X = Thickness
Available in 3.5”, 5.5” and 7.5”
Custom Sizes and
Designs Available
Factory Applied
Coatings Available
Edmund Allen Lumber Co.
•
p: 800.892.1884
•
f: 815.472.3976
Contact our sales department to
speak with one of our cedar design
representatives regarding your
project requirements.
•
1-800-892-1884
View all of our products online at www.edmundallen.com
9
Cedar Millwork Products
RAFTER TAILS
Available in heights
up to 16”
and thicknesses
from 2” to 12”
Custom Sizes and
Designs Available
10
Edmund Allen Lumber Co.
Factory Applied
Coatings Available
•
p: 800.892.1884
•
Contact our sales department to
speak with one of our cedar design
representatives regarding your
project requirements.
f: 815.472.3976
•
1-800-892-1884
View all of our products online at www.edmundallen.com
Cedar Millwork Products
LIGHT BLOCKS
Light Blocks: 2” x 8” x 8” - 2” x 8” x 12” - 2” x 10” x 12” – 2” x 12” x 15”
Rough sawn, routed edges
Center Shapes: Round (Dryer Vent), Octagonal & Rectangular (Electrical) and No Cutout.
Custom – (Made to order. Provide your specifications.)
Actual thickness is 1 ¾” thick and all width and length are ¼” off of full 8” 10” 12” & 15”
Smooth available as special order.
GABLE VENTS
Gable Vents: Triangular, Square, Rectangular and Octagonal.
Custom – (Made to order. Provide your specifications.)
Custom Sizes and
Designs Available
Edmund Allen Lumber Co.
Factory Applied
Coatings Available
•
p: 800.892.1884
•
f: 815.472.3976
Contact our sales department to
speak with one of our cedar design
representatives regarding your
project requirements.
•
1-800-892-1884
View all of our products online at www.edmundallen.com
11
Edmund A. Allen Lumber Company
117 E. Industrial Drive
Momence, IL 60954
p: 800.892.1884 • f: 815.472.3976
www.edmundallen.com
12