Faux Mission Clay Tiles

BORAL ROOFING
Build something great™
Faux Mission Clay Tiles
INSTALLATION GUIDE
www.boralna.com
Faux Mission Installation Guide
16-1/2” Eave to First Chalk Line
1-1/2” Over Hang
11” On Center
16-1/2” Eave to First Chalk Line
11” On Center
1. C
halk the first horizontal pan line at 16 ½” from the
eave. Chalk each additional line using a maximum of
15” course spacing.
3. Install pans along eave line between birdstops by
aligning the top edge of the pans with the
horizontal chalk line marked at 16 1/2” for the eave.
2. M
ark the on center spacing for pans at a maximum
11” along eave line. Install the birdstops along eave
line between on center spacing for pans.
4. Do not exceed the 11” maximum on-center spacing.
5. C
ut off 3” booster piece along the factory “score”
line from each booster/starter tile.
8. M
ake a diagonal cut at upper left corner of the starter/
cover tile to match the diagonal cut of the 1-Piece
“S” Tile or Claylite® field tile being used for the second
course.
6. R
otate or reverse small booster tile so that factory
fired edge (or small tapered end) is visible along the
eave line.
7. A
lign booster tile with the lower exposed edge of the
pan. Fasten each small booster tile by means of a
tile nail with a butt hook, wire tie, or code approved
adhesive method.
1
9. Install the 15” starter/cover tile directly over the small
booster tiles along the eave line.
10. Install the 1-Piece “S” Tile or Claylite® tile directly over
the top edge of the 2-Piece Mission eave treatment.
Ensure that a minimum 3” headlap is maintained.
11. P
roceed with the remainder of the roof installation using
the 1-Piece “S” or Claylite® field tiles.
2
Corporate Office
Western Office
Customer Service
Boral Roofing Products
200 Mansell Court East, Suite 310
Roswell, GA 30076
Boral Roofing Products
7575 Irvine Center Drive, Ste. #100
Irvine, CA 92618
800 669 TILE (8453)
www.boralna.com
ABOUT BORAL ROOFING
Boral Roofing is a subsidiary of Boral USA, the country’s largest premium provider of
complete roofing and re-roofing solutions for architects as well as commercial and
residential builders. Boral Roofing operates 15 clay and concrete tile manufacturing
plants throughout the U.S. and Mexico.
ABOUT BORAL USA
Headquartered in Roswell, Georgia, Boral USA through its subsidiaries employs
approximately 1,500 individuals at more than 140 operating and distribution sites
across the United States. The U.S. operations include the country’s largest brick
manufacturer and the largest clay and concrete roof tile manufacturer.
Build something great™ with Boral®
Roof Tiles | Roof Accessories | Bricks | Pavers | Stone
Boral Roofing Sales Offices
Phoenix, ARIZONA
Rialto, CALIFORNIA
Kapolei, HAWAII
Corona, CALIFORNIA
Denver, COLORADO
Kansas City, MISSOURI
Gilroy, CALIFORNIA
Pompano Beach, FLORIDA
Henderson, NEVADA
Lathrop, CALIFORNIA
Lake Wales, FLORIDA
Katy, TEXAS
Stockton, CALIFORNIA
Atlanta, GEORGIA
Tacoma, WASHINGTON
The Boral Logo is a trademark
of Boral Limited or its affiliates
and may be registered in many
jurisdictions worldwide.
© 2012 Boral Roofing LLC BR066-2/12
Download a QR Code reader app
for your smartphone, then take a
photo to visit our website at
www.boralna.com