Wettstein Tool - JW Donchin CO.

Transcription

Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Wettstein Tool
Inches
TECHNOLOGIES
MM
™
Milling Accessories
No. A1–212
5C Air Collet Fixture
For use with standard Hardinge® 5C Collets.
Designed especially for high production applications. Their light weight and compact size permits
the use of several units on indexing tables for custom applications or used individually for fast
chucking of parts on milling machines and drill presses.
Air operation is double acting for “Power” opening and closing of the collet. The collet is locked
into position for positive depth location of work. These units operate efficiently and effectively on
air pressure up to 150 PSI with upward clamping pressure exceeding 7.5 times line pressure. All
bearings and moving parts are hardened and precision ground for accuracy and long life.
___________________________________________________________________________________Collet
________________________________________________Capacity
__________________________________________________Cat.
__________No.
_________________________
A1-212-5C
Air Collet Fixture
5C
11/16"
TECHNOLOGIES INC.
One Eagle Rock Drive
Bath, Pennsylvania
18014-9648
Manufacturers of Specialty
Tooling and Accessories since 1963
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
www.EagleRockONLINE.com
Metric Conversions
MM
x
Inches
x
Grams
x
Ounces x
0.03937 =
25.4
0.03527
Inches
=
MM
=
Ounces
28.349527 =
Wettstein Tool
TECHNOLOGIES
Grams
™
Milling Accessories
No. A1–212
5C Air Collet Fixture Kits
All you need is a collet and an air
compressor. The foot operated 4-way air
valve provides “hands free” operation of the
Air Collet Fixture. The valve locks in place in
either the clamped or unclamped position
without the need for constant foot pressure.
Available for Standard 5C collets and also for
the HARDINGE 5C 2" Step Collet with
1-1/4 depth (see page 5-4).
Kit includes our standard Air Collet Fixture, a
4-Way Foot Valve and [3] Air Hoses.
___________________________________________________________________________________Collet
________________________________________________Capacity
__________________________________________________Cat.
__________No.
_________________________
___1/__16
___"_____________________________________A1-212-5C-K
___________________________________
______Air
_______Collet
_____________Fixture
______________Kit
______________________________________________5C
__________________________________________________1
Air Collet Fixture Kit
5C Step Collet
2
A1-212-5CS-K
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Inches
TECHNOLOGIES
MM
Ounces
Grams
Wettstein Tool
Milling Accessories
No. A1–212
5C Air Collet Fixture
For use with HARDINGE® 2" 5C Step Collets with 11/4" Depth.
Designed especially for high production applications. Their light weight and compact size permits
the use of several units on indexing tables for custom applications or used individually for fast
chucking of parts of milling machines and drill presses.
By using the HARDINGE 2" 5C Step Collets with 11/4" depth, superior performance is insured due to
the collet taper being on the "head" of the collet. This exclusive feature of the HARDINGE Step
Collet allows for maximum rigidity and repeatability of the workpiece.
Air operation is double acting for “Power” opening and closing of the collet. The collet is locked
into position for positive depth location of work. These units operate efficiently and effectively on
air pressure up to 150 PSI with upward clamping pressure exceeding 7.5 times line pressure. All
bearings and moving parts are
hardened and precision ground
for accuracy and long life.
For the "kit" version of this
fixture, please see page 5-3.
_______________________________________________________________________________Collet
___________________________________________Capacity
______________________________Depth
______________________________Cat.
___________No.
_______________________
Air Collet Fixture
HARDINGE 5C Step Collet
2"
11/4
A1-212-5CS
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
Grams
x
Ounces x
0.03937
25.4
0.03527
=
Inches
=
MM
=
Ounces
28.349527 =
Wettstein Tool
TECHNOLOGIES
Grams
™
Milling Accessories
c r i b cs™
T o o l Classi
No. A1–210
5C Manual Collet Fixture
An indispensable fixture for your milling machines
and drill presses.
Solid cast construction for
maximum repeatability and
durability. Features camoperated sleeve for opening
and closing standard 5C
collets. The collet remains in a
fixed position for positive
depth control. The springloaded handle can be
indexed to any desired
position for safety and ease of
operation while mounted
vertically or horizontally.
Beige enamel paint finish.
____________________________________________________________________Collet
_________________________________________Capacity
____________________________________________Cat.
_________No.
_____________
A1-210-5C
Manual Collet Fixture
5C
11/16"
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Inches
TECHNOLOGIES
MM
Ounces
Grams
tm
No. R1–2S
REDMER™ Heavy Duty Air Chucks
The REDMER AIR CHUCK is a heavy duty
holding fixture that has many uses in second
operation work, such as drilling, milling,
threading, tapping, deburring, etc. It is also an
ideal fixture for use in assembly work.
The REDMER AIR COLLET CHUCK was
developed with one purpose in mind – to
provide a holding fixture that would give
ACCURACY – SPEED – ECONOMY.
Designed primarily for use with Brown & Sharp
type screw machine collets, ACCURACY is
maintained as the collet remains stationary,
thereby eliminating the possibility of depth
and center variance due to slight variations in
the diameter of the work.
SPEED is obtained by the ease of operation of the collet chuck. The operator’s hands are free to
load and unload, thus reducing fatigue and cutting unproductive time to a minimum. The built-in
part stop features an air/coolant ejection
system to improve part and chip removal.
Its low consumption of air and its simplicity
of construction, which eliminates
expensive repairs, gives the desired
ECONOMY. It can be used on many
different jobs merely by changing collet
and stop. This, in most instances, eliminates
the designing or building of special fixtures
that are obsolete when parts are
changed. This also means the saving of
valuable production time and materials.
The REDMER AIR COLLET CHUCKS are indispensable where a holding fixture is required for round,
square or hexagon work. One fixture will eliminate the need for numerous jigs and fixtures that are
only adaptable to one particular job. It only requires the changing of the collet, and the adjusting
of the built-in stop rod to
change from operation to
another. These simple changes
can be accomplished in just a
few minutes.
Whether in short run applications that last for a few parts or
long run applications that seem
to run forever, the quality and
workmanship of the REDMER AIR
CHUCKS will provide a longlasting and accurate
performance.
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Inches
TECHNOLOGIES
MM
Ounces
Grams
tm
No. R1–000
REDMER "000" Heavy Duty Air Chuck
This compact model with 1/2" capacity was
designed especially for small work applications
were a limited amount of space is available.
Approximate Shipping
Weight: 4 lbs.
Collet
#00
3C
Capacity
3/8"
1/2"
Cat. No.
R1-000-00
R1-000-3C
Please call for other collet configurations
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Inches
TECHNOLOGIES
MM
Ounces
Grams
tm
No. R1–NC
REDMER "NC" Heavy Duty Air Chuck
Dual chamber piston provides powerful
holding of parts to 1 1/16”. Designed for
mounting vertically or horizontally. Narrow
profile allows for side-by-side stacking to fully
utilize table space. Ideal for CNC Machining
Centers and shuttle tables.
All "NC" Air Chucks include the
REDMER Collet Stop System with
built-in air/coolant ejection.
Weight: 15 lbs.
Collet
#11C
5C
Capacity
1"
1 1/16"
Cat. No.
R1-NC-11C
R1-NC-5C
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Inches
TECHNOLOGIES
MM
Ounces
Grams
tm
No. R1–2S
REDMER "2S" Heavy Duty Air Chuck
A real heavy-duty workhorse for the most
demanding applications. For parts up to 2”
diameter.
All "2S" Air Chucks include the
REDMER Collet Stop System with
built-in air/coolant ejection.
Weight: 38 lbs.
Collet
#22D
RC5
Capacity
1 5/8"
2"
Cat. No.
R1-2S-22D
R1-2S-RC5
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Inches
Wettstein Tool
No. A1–220
ANTI-BACKLASH™ Ring Set
TECHNOLOGIES
MM
™
Turning Accessories
c ri bassics™
l
o
o
T Cl
A valuable time saver for your Lathes and
Turning Centers. Every ring you will ever need
for boring out your soft jaws on one convenient
wooden rack.
The Standard Set [A1-220-00] includes the
complete set of 48 rings from 1" to 315/16" in 1/16"
increments on a wooden rack.
The Short Stack [A1-220-10] from the standard
set. Includes 16 rings from 1" to 115/16" in 1/16"
increments on a wooden rack.
_______________________________________________________________________________________________________________________________________________________________________________Cat.
__________No.
_____________
15
___________________Set
_______________________________________________48
______Rings,
___________1
___to
_____3____/_16
____in
____16th
_________increments
________________________________________________________A1-220-00
_______________________
______Standard
15
A1-220-10
Short Stack
16 Rings, 1 to 1 /16 in 16th increments
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Inches
TECHNOLOGIES
MM
Wettstein Tool
™
Turning Accessories
No. A1–33
BUSHETTE ® Collet Type Tool Holders
An excellent alternative to bushings. The BUSHETTE Tool Holders are
designed especially for CNC Lathes and Turning Centers where tools
must be practical and hard working to keep your machines
competitive in today’s tough market. Excellent for presetting backup
tooling and setting up for your next job.
All BUSHETTE's are fully hardened and precision ground.
Available for 5C, R8, 3C, 3AT, 2MT and 3J Collets.
Collet Stops are included with all 5C BUSHETTE's.
A great way to make use of the Collets lying
around the shop.
Type I Bushette
Unobstructed “Through Hole”
For 5C, 3C, 3AT and 3J Collets
The design of these collets allows
for an unobstructed through hole.
Tools can extend beyond the back
of the Bushette.
Type II Bushette
Obstructed “Through Hole”
For R8 and 2MT Collets
The design of these collets do not
allow tooling to extend beyond the
interior depth of the collet.
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Wettstein Tool
Inches
TECHNOLOGIES
MM
™
Turning Accessories
No. A1–33 [continued]
______Collet
______________Type
_____________________Dia.
______________________________a________________________b
_______________________c
_____________________d
______________________e____________________Cat.
__________No.
_________________________
________________________________
_____________2MT
________________________1"
__________________________3__1_/__4__________________2__1_/_4_________________1__1_/_8________________3_/__4_________________1_/_4_________________A1-33-2MT1000
________________________________
_____________2MT
________________________1
__1_/__4_"____________________3__1_/__4__________________2__1_/_4_________________1__1_/_8________________3_/__4_________________1_/_4_________________A1-33-2MT1250
________________________________
_____________2MT
________________________1
__1_/__2_"____________________3__1_/__4__________________2__1_/_4_________________1__5_/_8________________3_/__4_________________1_/_4_________________A1-33-2MT1500
3
1
3
3
3
7
________________________________
_____________2MT
________________________1
___/__4_"____________________3___/__4__________________2___/_4_________________1__/__8_________________/__4__________________/_4_________________A1-33-2MT1750
________________________2"
__________________________3___3/__4__________________2__3_/_4_________________2__1_/_8________________3_/__4_________________1_/_4_________________A1-33-2MT2000
________________________________
_____________2MT
________________________1"
__________________________3__1_/__4__________________2__1_/_4_________________1__1_/_8________________3_/__4_________________1_/_4_________________A1-33-3AT1000
________________________________
_____________3AT
___________________________1
___1/__4_"______________________3.35
__________________________2__1_/_4___________________1__3_/__8__________________3_/_4___________________.35
_____________________A1-33-3AT1250
____________________________________
______________3AT
3
1
1
5
____________________A1-33-3AT1500
________________________________
_____________3AT
________________________1
___/__2_"___________________3.35
________________________2___/_4_________________1___/_8_________________/__4________________.35
____________________A1-33-3AT1750
________________________________
_____________3AT
________________________1
___3/__4_"___________________3.35
________________________2__1_/_4_________________1__7/__8________________3_/__4________________.35
________________________2"
_________________________3.85
________________________2__3_/_4_________________2__1_/_8________________3_/__4________________.35
____________________A1-33-3AT2000
________________________________
_____________3AT
_______________________3"
___________________________4__7/_8___________________4__1_/_4_________________—
____________________—
____________________5_/_8_________________A1-33-3J3000
________________________________
______________3J
1
7
1
5
_______________________3
___/__2_"_____________________5__/_8___________________5___/_4_________________—
____________________—
_____________________/_8_________________A1-33-3J3500
________________________________
______________3J
_______________________1"
__________________________3__1_/__4__________________2__1_/_4_________________1__1_/_8________________3_/__4_________________1_/_4_________________A1-33-3C1000
________________________________
______________3C
__1_/__4_"___________________3.35
________________________2__1_/_4_________________1__3_/_8________________3_/__4________________.35
____________________A1-33-3C1250
________________________________
______________3C
_______________________1
__1_/__2_"___________________3.35
________________________2__1_/_4_________________1__5_/_8________________3_/__4________________.35
____________________A1-33-3C1500
________________________________
______________3C
_______________________1
3
3
1
7
___/__4_"___________________3.35
________________________2___/_4_________________1__/__8_________________/__4________________.35
____________________A1-33-3C1750
________________________________
______________3C
_______________________1
_________________________3.85
________________________2__3_/_4_________________2__1_/_8________________3_/__4________________.35
____________________A1-33-3C2000
________________________________
______________3C
_______________________2"
___1/__2_"_______________________4___1/__4______________________2_______________________2_____________________3_/_4____________________3/__4__________________A1-33-5C1500
____________________________________
_______________5C
__________________________1
___3/__4_"____________________4___1/__8__________________2__3_/_4__________________2___________________3_/__4_________________5_/_8_________________A1-33-5C1750
________________________________
______________5C
_______________________1
3
5
1
3
1
______________________________________2"
_________________________________________4
_____/__8_____________________________2_____/__4___________________________2____/___8___________________________/__4______________________________/__8__________________________A1-33-5C2000
____________________________________________________
______________________5C
_______________________2
__1_/__2_"____________________4___5/__8__________________3__1_/_4_________________2__5_/_8________________3_/__4_________________5_/_8_________________A1-33-5C2500
________________________________
______________5C
_______________________1
__1_/__2_"_____________________4__7/_8___________________3__1_/_2_________________1__3_/_4________________3_/__4_________________5_/_8_________________A1-33-R81500
________________________________
______________R8
_______________________1
___3/__4_"_____________________4__7/_8___________________3__1_/_2_________________1__7/__8________________3_/__4_________________5_/_8_________________A1-33-R81750
________________________________
______________R8
_____________________________4___7/__8____________________3__1_/_2___________________2__1_/__8__________________3_/_4____________________5/__8__________________A1-33-R82000
____________________________________
________________R8
_________________________2"
3
5
47/8
31/2
25/8
/4
/8
A1-33-R82500
R8
21/2"
All 5C BUSHETTE's include Collet Stops
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Wettstein Tool
Inches
TECHNOLOGIES
MM
Ounces
Grams
™
Turning Accessories
c r i bass ics™
l
o
o
T Cl
No. A1–51
5C Expanding Collets
The most effective and accurate means of internal chucking
for short runs to mass production. Features a solid, one piece
body for maximum rigidity and repeatability. Once seated in
the spindle and machined to size, these collets can hold
concentricity well within .0005". Applicable on any machine or
fixture with a 5C spindle. Machinable to any configuration
within their stock and minimum machinable diameters.
Collets with diameters 4" and larger feature our exclusive
lock ring for greater stability and accuracy while machining
to their specific application.
Extended 5C Expanding Collets —
Made for holding delicate or long and narrow
parts or where machine clearance is an issue.
Machinable to any dimension within their range,
only the front [1" long] expands.
No. A1-51-5C-0500-2000
No. A1-51-5C-0500-3000
No. A1-51-5C-1000-2000
No. A1-51-5C-1000-3000
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Wettstein Tool
Inches
TECHNOLOGIES
MM
™
Turning Accessories
No. A1–51 (continued)
a
b
Minimum
c
d
Minimum
______Dia.
__________________________Lgth.
_____________________Machinable
_______________________________Dia.
_______________Ext.
___________Dia
___________________Ext.
___________Lgth.
_________________________Ext.
__________Dia.
_________________________Cat.
____________No.
__________________________________________
1
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-0500-1000
__________________________________________
_______/_2__"__________________1"
_________________________.250"
1
______________________________1"
_________________________1"
_______________________.750"
_________________________A1-51-5C-0500-2000
__________________________________________
_______/_2__"__________________2"
_________________________.250"
1
_________________________2"
_______________________.750"
_________________________A1-51-5C-0500-3000
__________________________________________
_______/_2__"__________________3"
_________________________.250"
______________________________1"
_________________________—
__________________________—
______________________A1-51-5C-1000-1000
__________________________________________
_______1"
_____________________1"
_________________________.437"
______________________________—
_________________________1"
_______________________.750"
_________________________A1-51-5C-1000-2000
__________________________________________
_______1"
_____________________2"
_________________________.437"
______________________________1"
_________________________2"
_______________________.750"
_________________________A1-51-5C-1000-3000
__________________________________________
_______1"
_____________________3"
_________________________.437"
______________________________1"
1
_________________________—
__________________________—
______________________A1-51-5C-1500-1000
__________________________________________
_____1
___/__2_"_________________1"
_________________________.750"
______________________________—
1
1
_________________________—
__________________________—
______________________A1-51-5C-1500-1500
__________________________________________
_____1
___/__2_"_______________1___/__2_"_____________________.750"
______________________________—
1
_________________________—
__________________________—
______________________A1-51-5C-1500-2000
__________________________________________
_____1
___/__2_"_________________2"
_________________________.750"
______________________________—
1
1
__________________________—
______________________A1-51-5C-1500-2500
__________________________________________
_____1
___/__2_"_______________2___/__2_"_____________________.750"
______________________________—
_________________________—
1
__________________________—
______________________A1-51-5C-1500-3000
__________________________________________
_____1
___/__2_"_________________3"
_________________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-2000-1000
__________________________________________
_______2"
_____________________1"
_________________________.750"
______________________________—
_________________________—
1
__________________________—
______________________A1-51-5C-2000-1500
__________________________________________
_______2"
___________________1___/__2_"_____________________.750"
______________________________—
_________________________—
_______2"
_____________________2"
_________________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-2000-2000
__________________________________________
1
___________________2___/__2_"_____________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-2000-2500
__________________________________________
_______2"
_________________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-2000-3000
__________________________________________
_______2"
_____________________3"
1
_________________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-2500-1000
__________________________________________
_____2___/__2_"_________________1"
1
1
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-2500-1500
__________________________________________
_____2___/__2_"_______________1___/__2_"_____________________.750"
1
_________________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-2500-2000
__________________________________________
_____2___/__2_"_________________2"
1
1
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-2500-2500
__________________________________________
_____2___/__2_"_______________2___/__2_"_____________________.750"
1
_________________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-2500-3000
__________________________________________
_____2___/__2_"_________________3"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-3000-1000
__________________________________________
_______3"
_____________________1"
_________________________.750"
1
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-3000-1500
__________________________________________
_______3"
___________________1___/__2_"_____________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-3000-2000
__________________________________________
_______3"
_____________________2"
_________________________.750"
1
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-3000-2500
__________________________________________
_______3"
___________________2___/__2_"_____________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-3000-3000
__________________________________________
_______3"
_____________________3"
_________________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-4000-1000
__________________________________________
_______4"
_____________________1"
_________________________.750"
1
_________________________—
__________________________—
______________________A1-51-5C-4000-1500
__________________________________________
_______4"
___________________1___/__2_"_____________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-4000-2000
__________________________________________
_______4"
_____________________2"
_________________________.750"
______________________________—
1
_________________________—
__________________________—
______________________A1-51-5C-4000-2500
__________________________________________
_______4"
___________________2___/__2_"_____________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-4000-3000
__________________________________________
_______4"
_____________________3"
_________________________.750"
______________________________—
_________________________—
__________________________—
______________________A1-51-5C-5000-2000
__________________________________________
_______5"
_____________________2"
_________________________.750"
______________________________—
6"
2"
.750"
—
—
—
A1-51-5C-6000-2000
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Wettstein Tool
No. A1–51
5C Expanding Collet Set
Includes one each of our most
popular 5C Expanding Collet sizes
in a convenient wooden stand.
Inches
TECHNOLOGIES
MM
™
Turning Accessories
c r i b cs™
T o o l Classi
________________________________________________________________________________________________________________________________________________________________________________________Cat.
___________No.
_____________________
5C Expanding Collet Set
A1-51-5C-001
________Set
_________includes
______________________one
___________each
_______________of
______the
__________following
________________________collets
_____________________________________________________________________________________________________________________________________________________
Minimum
______Diameter
______________________________________________________Length
______________________________________Machinable
________________________Dia.
_________________________________Cat.
__________No.
_________________________________
1
_____________________________________________.250"
_____________________________________________A1-51-5C-0500-1000
___________________________________________
_____________/_2_"__________________________________________________1"
_____________________________________________.437"
_____________________________________________A1-51-5C-1000-1000
___________________________________________
_____________1"
____________________________________________________1"
1
_____________________________________________.750"
_____________________________________________A1-51-5C-1500-1000
___________________________________________
___________1___/_2_"_________________________________________________1"
2"
1"
.750"
A1-51-5C-2000-1000
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
No. M1–93, M1–94
WAHLSTROM™ Fully Automatic
Drill Chucks
=
Inches
TECHNOLOGIES
MM
Ounces
Grams
c r i b cs™
T o o l Classi
Changing tools is a matter of seconds - it
is no longer necessary to stop the spindle.
One drill press with a WAHLSTROM
Automatic Drill Chuck does the work of
several. Multi-head drill press setups are
eliminated. You can spot drill, drill and ream
with one setup. No keys, collets or
wrenches are used. The grip increases with
the load. Save costly minutes in changing
tools.
WAHLSTROM Automatic Drill Chucks are not
limited to regular drill press work. They can
be used to great advantage on boring and
milling machines, on lathes for deburring
and filing and many special applications.
WAHLSTROM Automatic Drill
Chucks are rugged tools,
proven out in many years of
heavy production work. Simple
construction assures reliability
and ease of operation.
No keys, collets, or wrenches
needed. Save as much as 95%
of tool-changing down time.
No. M1-94
1/2" Capacity
No. M1-93
3/8" Capacity
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Inches
TECHNOLOGIES
MM
Ounces
Grams
Fast- paced uninterrupted production with
Wahlstrom quick change automatic chuck.
SPINDLE
NEVER
STOPS
1. Grip Sleeve. Pull down. Jaws open
automatically; drill is released.
2. Insert new drill. Push tapered part up.
Drill is locked in place.
For drill presses, boring mills, jig
bore, milling machines and other
special applications. The grip of
the jaws increase with the load.
Important Note: WAHLSTROM
Automatic Drill Chucks are for
manually operated drill presses
and milling machines only.
NOT FOR AUTOMATIC DRILL PRESS.
3/8" Capacity
1/2" Capacity
Shank Type
Cat. No.
Cat. No.
_____________________________________________________________________________________________________________________________________________
Morse taper shank # 1
M1-93-MT1
M1-94-MT1
_____________________________________________________________________________________________________________________________________________
M1-93-MT2
M1-94-MT2
_____________________________________________________________________________________________________________________________________________
––
M1-94-MT3
_____________________________________________________________________________________________________________________________________________
Jacobs female # 2
M1-93-JF2
M1-94-JF2
_____________________________________________________________________________________________________________________________________________
Jacobs female # 33
M1-93-JF33
M1-94-JF33
_____________________________________________________________________________________________________________________________________________
1/2" straight shank
M1-93-SS0500
M1-94-SS0500
_____________________________________________________________________________________________________________________________________________
3/4" straight shank
—
M1-94-SS0750
_____________________________________________________________________________________________________________________________________________
R8 shank
M1-93-R8
M1-94-R8
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Wettstein Tool
Inches
TECHNOLOGIES
MM
™
Grinding Accessories
™
ib
o o lc rClassics
T
Endmill and Shellmill Grinding Fixture
No. A1–205
The original WETTSTEIN TOOL grinding fixture
for regrinding Endmill and Shellmill faces on
your surface grinder. Uses standard 5C Collets.
The 5C spindle indexes to accurately position
the cutting edge to be ground. All angles are
built into the base. Available with 15° or 36°
indexing.
Primary End Relief
To grind primary end relief and
center relief, place end mill in
fixture and grind one flute.
Then index to grind opposite
flute. This will give a 5° primary
end relief angle.
Center Relief Angle
Shellmill arbors on page 5-6 are required for
grinding Shellmills.
This view illustrates position of
wheel at start of grinding
position and center relief
angle 2°.
Secondary End Clearance
To grind secondary end
clearance, tip fixture [as shown]
using same wheel position as
illustrated at left. This gives a
secondary end clearance of 30°.
The tool will index to allow
grinding opposite tip.
_______________________________________________________________________Flutes
____________________________________________Index
________________________________________Cat.
________No
____________
_____Endmill
_____________Grinding
_______________Fixture
______________________________________2-3-4-6-8-12
______________________________________________15°
______________________________________A1-205-00
____________________
Endmill Grinding Fixture
5-10
36°
A1-205-10
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Wettstein Tool
Inches
TECHNOLOGIES
MM
™
Turning Accessories
No. A1–52
Machinable Expanding Arbors
An effective and economical means for
internal chucking. Easy Machinability and
operation. Available individually or in
complete sets with wrenches.
Toolbo
x
oolbox
Basics™
Minimum
______Diameter
___________________________Machinable
________________________Dia.
____________________b
_______________________c_________________________d_______________________e
_________________________Cat.
__________No.
_______________
_________________________________3"
______________________1/__4_"______________________—
________________________—
_________________________A1-52-0250
_________________________
____________1_/_4__"____________________________.135"
_________________________________3_____________________1_/_2_______________________—
________________________—
_________________________A1-52-0375
_________________________
_____________3_/_8______________________________.200
_________________________________3_____________________1_/_2_______________________—
________________________—
_________________________A1-52-0500
_________________________
_____________1_/_2______________________________.200
_________________________________3______________________7/_8_______________________—
________________________—
_________________________A1-52-0625
_________________________
_____________5_/_8______________________________.250
3
7
_________________________________4______________________/_8_______________________—
________________________—
_________________________A1-52-0750
_________________________
______________/_4______________________________.250
_________________________________4____________________1__1_/_4______________________—
________________________—
_________________________A1-52-0875
_________________________
_____________7_/_8______________________________.360
____________________________________4_______________________1__1_/_4________________________—
__________________________—
____________________________A1-52-1000
___________________________
_______________1__________________________________.360
_________________________________4____________________1__1_/_4______________________1"
______________________1__1_/_2__"_____________________A1-52-1250
_________________________
____________1__1_/_4_____________________________.360
1
1
1
_________________________________4____________________1___/_4______________________1"
______________________1___/_2__"_____________________A1-52-1500
_________________________
____________1___/_2_____________________________.360
_________________________________4____________________1__1_/_4______________________1"
______________________1__1_/_2__"_____________________A1-52-1750
_________________________
____________1__3_/_4_____________________________.360
___________________________________________________4_______________________________1
____1_/__4_________________________________1"
__________________________________1___1__/__2__"_________________________________A1-52-2000
______________________________________
_____________________2________________________________________________.360
____________________________________4_______________________1__1_/_4________________________1"
________________________1
___1_/_2__"_______________________A1-52-2500
____________________________
_____________2___1/__2________________________________.360
1
1
1"
1 /2"
A1-52-3000
3
.360
4
1 /4
_____________________________________________________________________________________________________________________________________________________________________________________________Cat.
__________No.
_________________
______Expanding
________________________Arbor
_____________Set
_______1_/__8__-__1
___1_/__4__"__(8
_____pcs)
__________with
__________wooden
__________________stand
______________________________________________________________________________A1-52-0001
____________________________
A1-52-0002
Expanding Arbor Set 11/2, 13/4, 2" (3 pcs)
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Wettstein Tool
No. A1–213
HI–LO™
Wheel Dresser
Inches
TECHNOLOGIES
MM
Ounces
Grams
™
c r i b cs™
T o o l Classi
For Surface Grinders. Swings from 2" to 9"
instantly. Eliminates time consuming up
and down cranking of the spindle and
save wear on elevating screws. Includes
one premium 1/4 Karat Diamond.
____________________________________________________________________________________________________________________________________________________________________Cat.
_______________________No.
_____________________________
HI-LO Wheel Dresser
A1-213-00
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Wettstein Tool
Inches
TECHNOLOGIES
MM
™
No. A1–206
Milling Cutter Grinding Fixture
For use on your surface grinder. Fully adjustable to accommodate straight or
angle milling cutters up to 6" diameter and 1" width. A complete set of
bushings are included to accommodate 7/8", 1", 11/4", and 11/2" cutter bores.
______________________________________________________________________________________________________________________________________________________________________Cat.
______________________No.
____________________________
Milling Cutter Grinding Fixture
A1-206-00
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Wettstein Tool
Inches
TECHNOLOGIES
MM
Ounces
Grams
™
No. A1–247
RED FLASH™ Wheel Dresser
For dressing grinding wheels up to 21/2"
wide. Rack and gear design insures a
smooth and consistent movement on
even the widest wheels. Includes one
premium 1/4 Karat Diamond.
____________________________________________________________________________________________________________________________________________________________________Cat.
______________________No.
______________________________
RED FLASH Wheel Dresser
A1-247-00
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
=
Inches
TECHNOLOGIES
MM
Ounces
Grams
Wettstein Tool
™
Turning Accessories
c r i bassics™
l
o
o
T Cl
No. A1–248
SHAPLANE™ Radius Tool
A simple and accurate way to turn a radius on your manual lathe. Each unit features a rigid cast iron
construction for an accurate chatter-free operation and long life. The gearing is fully enclosed to
prevent the entrance of any chips or foreign matter. Setups are quick and easy. An extension handle
is included to keep your hands away from the hot chips while feeding the tool.
All tools use 1/4" square tool bits except for the No. A1-248-04 which uses a 3/8" square tool bit.
No. A1-248-04
No. A1-248-03
No. A1-248-01
The No. A1-248-07 SHAPLANE Radius Tool turning a concave radius.
_________________________________________________Range
____________________________________Shank
_____________[H
_____x___W
_____x___L]
____________________For
_______Lathes:
_________________________________Cat.
__________No.
______________
1
1
9
________________________________max.
___________2___/__2_"__dia.
_________ball
________________________1___/_4_"__x____/_16
___"__x__6"
________________________13"
______and
_________over
__________________________A1-248-01
________________________
______Convex
1
1
9
__________/__2_"__radius
_________________________________1___/_4_"__x____/_16
___"__x__6"
________________________13"
______and
_________over
__________________________A1-248-03
________________________
______Concave
____________________________________min.
13" and over
A1-248-04
Concave
min. 1" radius
11/4" x 9/16" x 6"
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces x
28.349527 =
25.4
Inches
=
TECHNOLOGIES
MM
Ounces
Grams
Wettstein Tool
™
Turning Accessories
No. A1–248 [Continued]
No. A1-248-07
No. A1-248-06
No. A1-248-05
The No. A1-248-05 SHAPLANE Radius Tool turning a convex [ball] radius.
_______________________________________________Range
______________________________________Shank
_____________[H
_____x___W
_____x____L]
__________________For
_______Lathes:
___________________________________Cat.
_________No.
______________
_____________________________max.
___________1___5/__8_"___dia.
________ball
_____________________________1"
____x___3_/_8__"__x__4"
_____________________________9"
____to
_____13"
______________________________A1-248-05
_______________________
______Convex
_________3/__8_"__radius
______________________________________1"
____x___3_/_8__"__x__4"
_____________________________9"
____to
_____13"
______________________________A1-248-06
_______________________
______Concave
__________________________________min.
1" x 3/8" x 4"
9" to 13"
A1-248-07
Concave
min. 3/4" radius
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Inches
TECHNOLOGIES
MM
Wettstein Tool
Milling Accessories
No. A1–36
Straight Shank Shellmill Arbors
Fully hardened and ground. Solid, onepiece shank, head and plug. Replaceable
cutter slot keys.
For use on standard milling applications or
for mounting Shellmills in our A1-205 Endmill
Grinding fixture found on page 6-1
__________a
______________________________b
________________________________________________________________________________________________________________________________________________________________________________
___________________________e
____________________________f___________________________Cat.
__________No.
____________________________
______Shank
______________________Shellmill
__________________Bore
______________________c____________________________d
1
1
___________________________3.450
_____________________________.625
____________________________A1-36-0500-0500
________________________________________
__________/__2_"___________________________/__2_"______________________.650
___________________________1.340
1
3
___________________________1.750
___________________________3.750
_____________________________.720
____________________________A1-36-0500-0750
________________________________________
__________/__2_"___________________________/__4_"______________________.885
3
3
___________________________1.750
___________________________3.750
_____________________________.720
____________________________A1-36-0750-0750
________________________________________
__________/_4__"___________________________/__4_"______________________.885
3
________________________1.187
____________________________2.125
___________________________4.110
_____________________________.720
____________________________A1-36-0750-1000
________________________________________
__________/_4__"___________________________1"
3
1
____________________________2.500
___________________________4.270
_____________________________.850
____________________________A1-36-0750-1250
________________________________________
__________/_4__"_________________________1___/__4_"____________________1.500
1"
1"
1.187
2.125
4.110
.720
A1-36-1000-1000
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Inches
TECHNOLOGIES
MM
c r i bassics™
l
o
o
T Cl
No. M1–89
WAHLSTROM™ Float Lock Vise for Band Saws
Ideal for fast setups on production pieces. With the WAHLSTROM
Float-Lock Band Saw Vise, you cut accurately and safely — all
shapes and thickness of material. Wide angle control [like steering
a motorcycle] makes intricate sawing easy. Grip or release work
with simple twist of handles. Hands never need to touch the work,
assuring safety.
For hard-to-hold pieces, vertical cutting,
automatic chain feed operation, irregular
shapes and compound angle cutting.
Allows intricate cutting while safely
keeping hands away from the material
and minimizing blade wear.
Difficult saw operations
become much easier
used on band saw with chain
feed option.
Deluxe jaw blocks feature Horizontal and
Vertical “V” grooves that align and grip
rounds securely. Parallel grooves make
easy alignment of parts.
Hands stay at a safe distance
from saw blade
Deluxe Jaw Blocks - can be
used for a variety of machining
and fixturing applications.
Float Lock Safety Vise for Band Saws
Capacity
10"
Overall Length
24"
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
Cat. No.
M1-89-14-10
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Inches
TECHNOLOGIES
MM
No. M1–89
WAHLSTROM™ Float Lock Vise for Drill Presses
™
c r i b lassics
l
o
o
T
C
The Original WAHLSTROM Float-Lock Drill Press Vise
with screw adjustment and removable jaw blocks.
Vise can be turned over on three sides so that many
holes can be drilled safely and accurately without
removing the part. The adjustment screw shaft is
protected from chips and adjusts for the full capacity
of the vise.
Each drill press vise includes a “T” bolt mounting
clamp to mount the vise securely at any position on
the drill press table. The mounting clamp also allows
the vise to swing to the edge of the table for clamping
long parts. When the vise is not in use, the mounting
clamp can quickly swing the vise completely off the
table and out of the way, eliminating the time
consuming need of removal and storage.
Vises come complete with one set of Deluxe jaw
blocks and mounting clamp. Jaw pads feature
Horizontal and Vertical “V” grooves that align and
grip rounds securely. Parallel grooves make easy
alignment of jigs and fixtures.
Deluxe Jaw Blocks - can be used for a variety
of machining and fixturing applications.
Accomodates a wide
range of applications from
single parts, long shafts to
production work using jigs
and fixtures. When not in
use just swing the vise out
of the way.
Float Lock Safety Vise for Drill Presses
Corner Mounting Attachment
Capacity
8"
Overall Length
18"
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
No. M1-89-9
Corner Mounting
Attachment
Quickly attaches the vise
to any drill press table.
Eliminates the need to drill
a mounting hole in the
table and allows the vise to
be easily moved between
multiple drill presses.
Cat. No.
M1-89-15-8
M1-89-9
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Inches
TECHNOLOGIES
MM
c r i bassic s™
l
o
o
T Cl
WAHLSTROM™ Float Lock Vise for
No. M1–89
Drill Presses
Featuring a quick-acting ratchet adjustment for
faster setups and use. The thumb ring releases
the ratchet to move the ratchet jaw along the
vise shaft. Once the ratchet jaw is locked in
position, the locking jaw clamps down on the
part using the adjustment screw handle.
Easy to mount in minutes. Expand the capacity
of your machines and boost production in a
variety of setups. Work is tightly locked, or
completely released, by a quick turn of the
hinged handle which operates the vise jaw. Vise
turns on three sides, which permits drilling many
holes without removing work.
All Wahlstrom Float Lock Vises feature Jaw Pads
that are replaceable and can be machined to
accommodate specific applications. All vises can
be turned over on three sides so many holes can be
drilled without removing work.
The “T” bolt mounting clamp locks the vise
securely at any position on the table, making it
a dependable drill jig when large quantities of
the same part are to be drilled. The mounting
clamp also allows the vise to swing to the edge
of the table for clamping long parts. When the
vise is not in use the mounting clamp can
quickly swing the vise completely off the table
and out of the way eliminating the time
consuming need of removal and storage.
Vises come complete with one set of Deluxe
jaw blocks and mounting clamp. Jaw pads
feature Horizontal and Vertical “V” grooves that
align and grip rounds securely. Parallel grooves
make easy alignment of jigs and fixtures.
For Drill Press Vises, the optional Corner Mounting
Attachment (No. M1-89-9) eliminates the need to
drill a mounting hole in the table and also provides
the full advantage of the maximum jaw opening
on small tables.
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Inches
TECHNOLOGIES
MM
No. M1–89 [Continued]
No. M1-89-9
Corner Mounting
Attachment
Quickly attaches the vise
to any drill press table.
Eliminates the need to drill
a mounting hole in the
table and allows the vise to
be easily moved between
multiple drill presses.
Deluxe Jaw Blocks - can be used for a variety
of machining and fixturing applications.
Fine For Assembly Work. Holds work securely in any
position. Can be mounted on any workbench
surface. Lock in place over the workbench or over
the edge for long or large parts.
Corner Mounting Attachment
Capacity
9"
12"
-
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
Overall Length
20"
26"
-
Cat. No
M1-89-18-9
M1-89-24-12
M1-89-9
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
Grams
x
Ounces x
0.03937 =
25.4
0.03527
Inches
=
MM
=
Ounces
28.349527 =
Wettstein Tool
TECHNOLOGIES
Grams
™
Milling Accessories
No. A1–26
UNPARALLEL'sTM Vise Jaw Swivel Blocks
For improved holding of round or odd shaped
parts in your milling vices. Block and ball pad
swivel to accommodate irregular shapes for
improved holding pressure. Body and swivel
are solid steel construction for durability and
long life.
a
21/2
41/2
51/2
61/2
b
1 5/16
1 5/16
113/16
113/16
c
11/2"
11/2"
11/2"
11/2"
d
/8
21/4"
31/4"
5"
7
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
e
13 deg.
7 deg.
6 deg.
5 deg.
Cat. No.
A1-26-2500
A1-26-4500
A1-26-5500
A1-26-6500
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376
Metric Conversions
MM
x
Inches
x
0.03937 =
Grams
x
0.03527 =
Ounces
Ounces x
28.349527 =
Grams
25.4
=
Wettstein Tool
Inches
TECHNOLOGIES
MM
™
No. A1–204
Woodruff Cutter Grinding Fixture
A simple grinding fixture for regrinding
Woodruff Cutters with 1/2" shank. Spring
stop adjusts to accommodate various
cutter diameters and for the proper
positioning of the cutter flutes.
___________________________________________________________________________________________________________________________________________________________________________Cat.
___________________No.
__________________________
Woodruff Cutter Grinding Fixture
A1-204-00
TECHNOLOGIES INC.
Bath, Pennsylvania
18014-9648
1-610-759-5200 • Fax: 1-610-759-4340
1-800-EAGLEROCK • 1-800-324-5376

Wettstein Tool - JW Donchin CO.

Transcription

Similar documents

I load a good couple of calibres, and do a considerable amount of

Mazak VTC 250 - Northern Oil Tool INC.

MB-LS170 - MB Crusher

Measuring Weight in the Metric System

Bronica SQ-B Brochure

Reddi-Crate

marshmallow fruit dip

SiroFlex - Kennel Kelp

CAPANNOLI COMPANY PROFILE

Grade 5 FCAT 2.0 Mathematics Reference Sheet