www.nsiindustries.com • Fax: 800.841.5566 • Phone: 1.800.321.5847

Transcription

— EFFECTIVE APRIL 2007 —
TM
www.nsiindustries.com • Fax: 800.841.5566 • Phone: 1.800.321.5847
The centerpiece of NSi’s incredible
product offering, Polaris in original
black is the insulated connector that
every other connector copies. Its
introduction marked the beginning
of a new age, providing the fastest,
safest, most professional connection
possible. In-line, wire entry from
either side, multi-cable, stacked – if
you have a need, there’s a Polaris
that works for you.
What’s better than the best insulated connector on the market?
The best insulated connector that
YOU configure, of course! Choose
your wire combination & quantity
of ports and we’ll custom engineer and fabricate your connector. Your custom connector will
even be UL rated! Whether Black,
Grey, or Blue, we’ll build the connector you specify based on your
project needs - and shipment is
made in only 3-4 days. Call us
at 800-321-5847 to discuss your
custom Polaris today.
Perfect for motors, Polaris Grey
provides the unique ability to connect or terminate fine stranded,
flexible, and ultra-flexible copper cable whenever maintenance
or repair are required. With an
integral sleeve that protects fine
strands and reduces stress on the
conductor, you can connect, disconnect, and reconnect with ease.
UL listed for use with fine stranded, flexible and ultra-flexible copper cables.
Finally, a Polaris for everything:
Polaris Blue is UL listed for direct
burial AND submersible applications. Its only limitation is the
cable’s limitation... so it goes
everywhere you need it to. And of
course, custom Polaris Blue is also
an option.
There simply isn’t an easier field
installation, where you can leave
your epoxies and heat shrink in
the truck!
• UL486D for Direct Burial/Below
grade use and submersible
Phone: 800.321.5847 • Fax: 800.841.5566 • www.nsiindustries.com
Table of
Contents
POLARIS™ INSUL-TAP CONNECTORS
FOR TWO WIRES
IT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
ISR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
POLARIS BLUE™
FOR IN-LINE DIRECT BURIAL
ISW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ITW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IPLW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
POLARIS GREY™
FOR FINE STRANDED/FLEXIBLE COPPER CONDUCTORS
Polaris Grey™ Series . . . . . . . . . . . . . . . . . . . . . . . . . 5
Replacement Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . 5
MULTI-CABLE CONNECTOR BLOCKS
IPL Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
IPLD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
IPLDH Series – Heavy Duty. . . . . . . . . . . . . . . . . . . . . 10
PLH Series – Uninsulated, Heavy Duty . . . . . . . . . . . . 10
WITH MOUNTING HOLES
IPLM Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
IPLMD Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PL Series – Uninsulated . . . . . . . . . . . . . . . . . . . . . . . 14
CUSTOM DESIGNED POLARIS
Offset Wire Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Stacked Wire Holes. . . . . . . . . . . . . . . . . . . . . . . . . . 16
Mounting Capability . . . . . . . . . . . . . . . . . . . . . . . . 16
Custom-Designed Polaris Grey . . . . . . . . . . . . . . . . . . 16
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Strip and Torque Charts . . . . . . . . . . . . . . . . . . . . . . 17
STACKED POLARIS CONNECTORS
IPLDS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
THE FINE PRINT
Alphanumeric Index . . . . . . . . . . . . . . . . . . . . . . . . . 19
How to Reach Us . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . 19
Polaris Connectors
INSUL-TAP CONNECTORS FOR TWO WIRES & IN-LINE SPLICERS/REDUCERS
IT SERIES
1
2
3
4
Insul-Tap connectors are suitable for connecting two wires. For sizes 3/0 AWG
and smaller, they are available in two styles – with wires being connected
from the same side of the connector (Figure1) or opposite sides of the
connector (Figure 2).
For sizes 250 MCM and larger, they are provided with open wire entry ports
on both sides of the connector (Figure 3), which allows for access from either
side. This style is supplied with removable access plugs to close the entry port
not being utilized.
Abrasion and chemical resistant. UV rated. Will not support combustion.
Cold temperature rated to -45°C. Dual rated for use with copper and/or
aluminum cables. 600 volts. 90°C. To receive the material in bags, add “-B”
to the catalog number.
Not recommended for fine-stranded, flexible wire. See Polaris Grey Series
page 3.
CATALOG
NO.
UPC
NO.
FIGURE
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
IT-4
ITO-4
IT-1/0
ITO-1/0
IT-3/0
ITO-3/0
IT-250
IT-350
IT-500
IT-600
IT-750*
ITH-750
95001
95002
95003
95004
95005
95006
95007
95008
95009
78944
95010
92640
1
2
1
2
1
2
3
3
3
3
3
4
4-14
4-14
1/0-14
1/0-14
3/0-6
3/0-6
250-6
350-6
500-4
600-6
750-250
750-250
1.07
1.07
1.62
1.62
1.84
1.84
2.12
2.47
2.87
3.24
3.48
3.48
1.50
1.50
1.75
1.75
1.87
1.87
2.13
2.44
2.94
3.05
3.50
3.50
1.12
1.25
1.62
1.75
1.75
1.87
2.31
2.50
2.81
2.94
3.50
4.50
Slotted
Slotted
3/16
3/16
1/4
1/4
5/16
5/16
5/16
5/16
3/8
5/16
12
12
6
6
6
6
6
4
4
4
2
2
.06
.06
.13
.13
.19
.19
.24
.39
.53
.80
.94
1.75
*Not UL Listed
ISR SERIES
1
ISR Series connectors are suitable for connecting two wires in-line. Insulated
with high dielectric strength plastisol and molded for precise fit. Supplied with
removable access plugs over the hex screw.
Abrasion and chemical resistant. UV rated. Will not support combustion.
Cold temperature rated to -45°C. Dual rated for use with copper and/or aluminum cables. 600 volts. 90°C.
Not recommended for use with extra-flexible cables.
See Polaris Grey Series page 3.
2
CATALOG
NO.
UPC
NO.
FIGURE
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
ISR-1/0
ISR-250
ISR-350
ISR-500
ISR-600
ISRH-750
95101
95102
95103
95104
78945
92645
1
1
1
1
1
2
1/0-14
250-6
350-6
500-4
600-6
750-250
3.25
4.00
4.47
4.62
5.83
7.25
1.48
1.90
2.20
3.00
3.05
3.25
.90
1.19
1.32
1.62
1.57
1.75
3/16
5/16
5/16
5/16
5/16
5/16
4
4
2
2
2
2
.15
.34
.51
.72
1.0
1.85
Effective April 2007
www.nsiindustries.com
E-mail: [email protected]
NSi 1
THERE IS NO BETTER METHOD FOR MAKING A DIRECT BURIAL OR SUBMERSIBLE CONNECTION.
This UL listed connector will do for direct burial and submersible applications what the original Polaris did for your standard installations. Remember split bolts? Reduce your risk. No taping. No guessing. No cutting to size in the field. Leave your epoxies and heat
shrink in the truck! Polaris Blue provides an installation you can be sure of. Like all members in the Polaris family, Polaris Blue will
save you time and money, while guaranteeing a perfect connection every time.
FASTER:
Strip the cable. Insert into Polaris Blue. Tighten the screw. That’s it. Requires no taping, compounds, heat shrink, cutting,
or set-up time.
SIMPLER INSTALLATION: All you need is a knife and a slotted screwdriver or allen head wrench. You don’t need to
search for a propane torch, or find out who has the compression tool. You don’t need the skills of a surgeon to properly trim parts or
the training of a scientist to mix chemicals to complete a successful connection.
EASIER: Most repairs to a damaged USE or URD cable are found by using a post hole digger. Not enough space to ensure a
good connection when using traditional methods such as heat shrink or rubber kits. Unless you dig a giant hole (time is money...), it’s
pretty difficult to get a heat gun under the heat shrink. Plus, you have the investment in tarps, rain gear and cold medicine while you
wait for ideal conditions. None of this is a problem for Polaris Blue!
MORE RELIABLE: There is less chance for error since there is little work performed in the field. The installation has been
applied in a controlled, quality environment. Eliminates time consuming, expensive call backs.
BETTER: Insulated with specially formulated, high-strength dielectric plastisol and molded for a precise fit. UL486D rated for direct
burial, below grade use and submersible applications. Cold temperature rated to -45° C. Suitable for use with copper or aluminum
conductors and abrasion and chemical resistant. The connector is even supplied complete with oxide inhibitor.
COST EFFECTIVE: Polaris Blue is less expensive than traditional rubber or epoxy kits right off the shelf – not even including the
connector – and then add the cost of installation! The RS Means Electrical Cost Data calculates that 1 electrician splicing cable from #6
to #1 AWG requires 2 man-hours per splice and for cable from 1/0 to 250 MCM, approximately 2.5 hours. Including overhead and
profit, the cost of the smaller splice should cost $211. Polaris Blue can be installed in minutes, and the total cost of the connector is less
than the cost of an electrician for an hour. Easily the most cost-effective way to solve direct burial and submersible connection problems.
FOR MORE INFORMATION ON POLARIS BLUE CALL 800.321.5847
2 NSi
Fax: 800.841.5566 Phone: 1.800.321.5847
Polaris Blue
™
IN-LINE – MULTI-CABLE – DIRECT BURIAL AND SUBMERSIBLE
ISW SERIES – DIRECT BURIAL AND SUBMERSIBLE IN-LINE SPLICER/REDUCERS
ISW Series connectors are suitable for connecting two wires in-line and are UL Listed for direct burial
and submersible applications (UL486D). Insulated with specially formulated high-strength dielectric
plastisol and molded for precise fit for a direct burial connection. Requires no taping, compounds,
heat shrink or cutting-to-size in the field. Supplied with removable access plugs over the hex screws.
Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to
-45°C. Suitable for use with aluminum and/or copper conductors. 600 volts. 90°C. Reusable.
CAT.
NO.
UPC
NO.
URD/USE THHN/XHHW*
WIRE RANGE
ISW-4
ISW-1
ISW-3/0
ISW-250
78925
78926
78927
78928
4-6 AWG
1-2 AWG
3/0-1/0 AWG
250-4/0 AWG
INSULATION
MIN DIA MAX DIA
0.244
0.352
0.462
0.618
0.412
0.582
0.720
0.895
HEX
SIZE
WEIGHT
LBS./EA
slotted
3/16
1/4
5/16
.12
.20
.25
.40
(INCHES)
LENGTH HEIGHT WIDTH
6.39
6.83
7.05
7.58
1.38
1.68
1.78
2.13
.75
.88
.94
1.13
STRIP
LENGTH
TIGHTENING
TORQUE
13/16
27/32
45
150
250
360
7/8
11/8
Approved for use with all conductors with insulation suitable for wet and/or damp locations. (Not recommended for use with extra flexible cable. See Polaris Grey, next page).
* Not suitable for direct burial with THHN/XHHW wire. For use in enclosures only. A properly installed connector will have no more than one conductor per port.
IPLW AND ITW MULTI-CABLE CONNECTORS
Suitable for connecting multiple wires and are UL Listed (UL486D) for direct burial and submersible applications. Insulated with specially formulated high-strength dielectric plastisol
and molded for precise fit for a direct burial connection. Requires no taping, compounds,
heat shrink or cutting-to-size in the field. Supplied with removable access plugs over the
hex screws. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold
temperature rated to -45°C. Suitable for use with aluminum and/or copper conductors. 600
volts. 90°C.
CAT.
NO.
ITW-4
IPLW4-3
IPLW4-4
IPLW4-5
IPLW4-6
ITW-1
IPLW1-3
IPLW1-4
IPLW1-5
IPLW1-6
ITW-3/0
IPLW3/0-3
IPLW3/0-4
IPLW3/0-5
IPLW3/0-6
ITW-250
IPLW250-3
IPLW250-4
IPLW250-5
IPLW250-6
UPC #OF
NO. PORTS
95123
95115
95116
78929
78930
95126
95121
95122
78931
78932
95124
95117
95118
78933
78934
95125
95119
95120
78935
78936
2
3
4
5
6
2
3
4
5
6
2
3
4
5
6
2
3
4
5
6
WIRE RANGE
INSULATION
URD/USE THHN/XHHW* MIN DIA MAX DIA
4-6 AWG
4-6 AWG
4-6 AWG
4-6 AWG
4-6 AWG
1-2 AWG
1-2 AWG
1-2 AWG
1-2 AWG
1-2 AWG
1-2 AWG
3/0-1/0 AWG
3/0-1/0 AWG
3/0-1/0 AWG
3/0-1/0 AWG
250-4/0 AWG
250-4/0 AWG
250-4/0 AWG
250-4/0 AWG
250-4/0 AWG
.244
.244
.244
.244
.244
.352
.352
.352
.352
.352
.462
.462
.462
.462
.462
.618
.618
.618
.618
.618
.412
.412
.412
.412
.412
.582
.582
.582
.582
.582
.720
.720
.720
.720
.720
.895
.895
.895
.895
.895
HEX
SIZE
WEIGHT
LBS./EA
LENGTH
slotted
slotted
slotted
slotted
slotted
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
.11
.19
.27
.35
.43
.19
.29
.39
.49
.59
.27
.54
.81
1.08
1.35
.40
.62
.84
1.06
1.28
1.68
2.64
3.61
4.57
5.54
1.87
2.80
3.72
4.65
5.57
2.37
3.57
4.77
5.97
7.17
2.57
3.81
5.11
6.41
7.71
(INCHES)
HEIGHT WIDTH
1.38
1.38
1.38
1.38
1.38
1.68
1.68
1.68
1.68
1.68
1.78
1.78
1.78
1.78
1.78
2.13
2.13
2.13
2.13
2.13
3.26
3.26
3.26
3.26
3.26
3.55
3.55
3.55
3.55
3.55
3.78
3.78
3.78
3.78
3.78
3.94
3.94
3.94
3.94
3.94
STRIP
LENGTH
TIGHTENING
TORQUE
3/16
45
45
45
45
45
150
150
150
150
150
250
250
250
250
250
360
360
360
360
360
3/16
3/16
3/16
3/16
27/32
27/32
27/32
27/32
27/32
7/8
7/8
7/8
7/8
7/8
11/8
11/8
11/8
11/8
11/8
Approved for use with all conductors with insulation suitable for wet and/or damp locations. (Not recommended for use with extra flexible cable. See Polaris Grey, next page).
A properly installed connector will have no more than one conductor per port.
POLARIS BLUE CUSTOM CONNECTORS
Let us custom engineer and fabricate a UL Listed direct burial and submersible insulated connector for your next project. Choose any
combination and quantity of our standard Polaris Blue and we’ll build a connector to meet your exact requirements. Wire entry can
even be from either side of the connector, based on your specific project needs. UL486D for direct burial or below grade use and submersible applications.
NSi 3
FOR MORE INFORMATION ON POLARIS GREY CALL 800.321.5847
4 NSi
Fax: 800.841.5566 Phone 1.800.321.5847
Polaris Grey
™
INSULATED CONNECTOR FOR FINE-STRANDED FLEXIBLE COPPER CONDUCTORS
POLARIS GREY
• Safe: insulated with high dielectric strength
plastisol for tough mechanical protection;
• Factory applied insulation provides consistent
quality and protection;
• Abrasion and chemical resistant;
• Fast: eliminates the need for cover and taping –
supplied with removable access plugs over the
hex screws to protect against contamination;
• Easy: three sizes cover 14 to 3/0 AWG;
• UL Listed for all types of flexible, fine-stranded
wires, uniquely color-coded grey;
• Reusable: ideal for cabletrays, troughs, wireways, raceways, ducts and motor junction
boxes;
• Economical.
Polaris Grey can be used with virtually any kind
of copper conductor, but is specifically designed
for use with fine-stranded, flexible and extraflexible copper conductors. This includes DLO
cable and motor lead wire, which makes it
excellent for use in motor connect/disconnect
applications.
Polaris Grey combines all the exceptional
features of insulated Polaris, the original (black)
with a NEW feature which allows you to connect
or terminate fine-stranded cables easily, and,
most important of all, safely.
Polaris Grey is for use with copper cables only,
is abrasion and chemical resistant and will not
support combustion. It is cold temperature rated
to -45˚C, rated 600V, 90˚C.
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
ITG-6
ITOG-6
IPLG 6-3
IPLG 6-4
IPLG 6-6
ITG-1
ITOG-1
IPLG 1-3
IPLG 1-4
IPLG 1-6
ITG-3/0
ITOG-3/0
IPLG 3/0-3
IPLG 3/0-4
IPLG 3/0-6
95140
95141
95142
95143
95145
95146
95147
95149
95150
95152
95153
95154
95155
95156
95158
2
2
3
4
6
2
2
3
4
6
2
2
3
4
6
WIRE RANGE BY CLASSIFICATION
CLASS B, C, D
CLASS K, M, I
6-14 AWG
6-14 AWG
6-14 AWG
6-14 AWG
6-14 AWG
1-10 AWG
1-10 AWG
1-10 AWG
1-10 AWG
1-10 AWG
3/0-4 AWG
3/0-4 AWG
3/0-4 AWG
3/0-4 AWG
3/0-4 AWG
6-14 AWG
6-14 AWG
6-14 AWG
6-14 AWG
6-14 AWG
2-10 AWG
2-10 AWG
2-10 AWG
2-10 AWG
2-10 AWG
2/0-2 AWG
2/0-2 AWG
2/0-2 AWG
2/0-2 AWG
2/0-2 AWG
LENGTH
(INCHES)
HEIGHT
WIDTH
1.07
1.07
1.54
1.97
2.28
1.62
1.62
2.27
2.92
4.22
1.84
1.84
2.65
3.43
4.99
1.50
1.50
1.50
1.50
1.50
1.75
1.75
1.75
1.75
1.75
1.87
1.87
1.87
1.87
1.87
1.12
1.25
1.12
1.12
1.12
1.62
1.75
1.62
1.62
1.62
1.75
1.87
1.75
1.75
1.75
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
1/8
12
12
12
6
6
6
6
6
6
6
6
6
6
6
4
.06
.06
.08
.11
.16
.13
.13
.19
.26
.38
.19
.19
.28
.37
.56
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
For display bags with a mounting hole for hanging, add the suffix “-B” to the part number.
Protect those fine-stranded wires with
Polaris Grey.
Here’s our secret: Polaris Grey comes with an integral sleeve
which protects the fine strands and helps the conductor maintain
its shape during the tightening process. The sleeve eliminates
breakage of the strands and reduces stress on the conductor and
therefore the potential for hot-spots. Replacement sleeves can be
purchased separately.
Specially designed for connecting and terminat-ing fine-stranded,
flexible copper conductors. Polaris Grey combines the reliability
and safety of a compression connection with the ease, affordability
and flexibility of a mechanical connection.
Motor replacement is now really easy. Simply strip the cable,
insert it into Polaris Grey, tighten the hex head screw, replace the
cap.
POLARIS GREY REPLACEMENT SLEEVES
CATALOG
NO.
UPC
NO.
DESCRIPTION
FITS
SERIES
PACKAGE
QTY.
SITG-6
SITG-1
SITG-3/0
95160
95161
95162
Sleeves for Polaris Grey
ITG-6
ITG-1
ITG-3/0
10
10
10
NSi 5
Polaris Connectors
INSULATED MULTI-CABLE CONNECTOR BLOCKS – WIRE ENTRY FROM ONE SIDE
IPL SERIES
IPL Series connectors are insulated with high-dielectric
strength plastisol. Molded for precise fit and supplied with
removable access plugs over the hex screws. Wire entry ports
on one side only. Eliminates the need for cover and taping.
Abrasion and chemical resistant. UV rated. Will not support
combustion. Cold temperature rated to -45°C. Dual rated
for use with copper and/or aluminum cables. Rated 600 V,
90°C. Not recommended for fine-stranded, flexible wire. To
receive the material in bags, add “-B” to the part number.
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
IPL 4-3
IPL 4-4
IPL 4-5
IPL 4-6
IPL 4-7
IPL 4-8
IPL 4-9
IPL 4-10
IPL 4-11
IPL 4-12
IPL 4-13
IPL 4-14
IPL 1/0-3
IPL 1/0-4
IPL 1/0-5
IPL 1/0-6
IPL 1/0-7
IPL 1/0-8
IPL 1/0-9
IPL 1/0-10
IPL 1/0-11
IPL 1/0-12
IPL 1/0-13
IPL 1/0-14
IPL 3/0-3
IPL 3/0-4
IPL 3/0-5
IPL 3/0-6
IPL 3/0-7
IPL 3/0-8
IPL 3/0-9
IPL 3/0-10
IPL 3/0-11
IPL 3/0-12
IPL 3/0-13
IPL 3/0-14
IPL 250-3
IPL 250-4
IPL 250-5
IPL 250-6
IPL 250-7
IPL 250-8
IPL 250-9
91001
91002
91003
91004
91005
91006
91007
91008
91009
91010
91011
91012
91101
91102
91103
91104
91105
91106
91107
91108
91109
91110
91111
91112
91201
91202
91203
91204
91205
91206
91207
91208
91209
91210
91211
91212
91301
91302
91303
91304
91305
91306
91307
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
4 -14
4 -14
4 -14
4 -14
4 -14
4 -14
4 -14
4 -14
4 -14
4 -14
4 -14
4 -14
1/0 - 14
1/0 - 14
1/0 - 14
1/0 - 14
1/0 - 14
1/0 - 14
1/0 - 14
1/0 - 14
1/0 - 14
1/0 - 14
1/0 - 14
1/0 - 14
3/0 - 6
3/0 - 6
3/0 - 6
3/0 - 6
3/0 - 6
3/0 - 6
3/0 - 6
3/0 - 6
3/0 - 6
3/0 - 6
3/0 - 6
3/0 - 6
250 - 6
250 - 6
250 - 6
250 - 6
250 - 6
250 - 6
250 - 6
1.54
1.97
2.39
2.82
3.32
3.65
4.07
4.50
4.92
5.10
5.76
6.18
2.27
2.92
3.57
4.22
4.87
5.52
6.17
6.82
7.47
8.12
8.77
9.42
2.65
3.43
4.21
4.99
5.77
6.56
7.33
8.11
8.89
9.67
10.45
11.23
2.99
3.85
4.71
5.57
6.43
7.29
8.16
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
2.13
2.13
2.13
2.13
2.13
2.13
2.13
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
2.19
2.19
2.19
2.19
2.19
2.19
2.19
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
12
6
6
6
4
4
4
4
3
3
2
2
12
6
6
6
4
4
4
4
3
3
2
2
6
6
4
4
3
3
3
2
2
1
1
1
6
6
4
4
3
3
3
.08
.11
.13
.16
.18
.21
.24
.26
.29
.31
.34
.36
.19
.26
.32
.38
.44
.51
.57
.63
.69
.76
.82
.88
.28
.37
.46
.56
.65
.74
.83
.92
1.02
1.11
1.20
1.29
.35
.47
.58
.70
.81
.93
1.04
6 NSi
Fax: 800.841.5566 Phone: 1.800.321.5847
Polaris Connectors
INSULATED MULTI-CABLE CONNECTOR BLOCKS – WIRE ENTRY FROM ONE SIDE
IPL SERIES CONTINUED
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
IPL 250-10
IPL 250-11
IPL 250-12
IPL 250-13
IPL 250-14
IPL 350-3
IPL 350-4
IPL 350-5
IPL 350-6
IPL 350-7
IPL 350-8
IPL 350-9
IPL 350-10
IPL 350-11
IPL 350-12
IPL 350-13
IPL 350-14
IPL 500-3
IPL 500-4
IPL 500-5
IPL 500-6
IPL 500-7
IPL 500-8
IPL 500-9
IPL 500-10
IPL 500-11
IPL 500-12
IPL 500-13
IPL 500-14
IPL 600-3
IPL 600-4
IPL 600-6
IPL 750-3*
IPL 750-4*
IPL 750-5*
IPL 750-6*
IPL 750-7*
IPL 750-8*
IPL 750-9*
IPL 750-10*
IPL 750-11*
IPL 750-12*
IPL 750-13*
IPL 750-14*
91308
91309
91310
91311
91312
91401
91402
91403
91404
91405
91406
91407
91408
91409
91410
91411
91412
91501
91502
91503
91504
91505
91506
91507
91508
91509
91510
91511
91512
78946
78947
78949
91601
91602
91603
91604
91605
91606
91607
91608
91609
91610
91611
91612
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
3
4
6
3
4
5
6
7
8
9
10
11
12
13
14
250-6
250-6
250-6
250-6
250-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
600-6
600-6
600-6
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
9.02
9.88
10.74
11.60
12.47
3.52
4.57
5.62
6.67
7.72
8.77
9.82
10.87
11.92
12.97
14.02
15.07
4.01
5.16
6.23
7.45
8.59
9.74
10.88
12.03
13.17
14.32
15.46
16.61
4.52
5.76
8.48
4.90
6.33
7.75
9.18
10.69
12.19
13.69
15.19
16.69
18.19
19.69
21.19
2.13
2.13
2.13
2.13
2.13
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
3.05
3.05
3.05
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
2.19
2.19
2.19
2.19
2.19
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.70
2.70
2.70
3.38
3.38
3.38
3.38
3.38
3.38
3.38
3.38
3.38
3.38
3.38
3.38
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
5/16
2
2
2
1
1
4
3
3
2
2
2
2
2
1
1
1
1
3
3
2
2
2
2
2
1
1
1
1
1
3
2
2
3
2
1
1
1
1
1
1
1
1
1
1
1.16
1.27
1.39
1.50
1.62
.59
.77
.96
1.14
1.32
1.50
1.68
1.86
2.04
2.22
2.40
2.58
.79
1.05
1.31
1.57
1.83
2.09
2.35
2.61
2.87
3.13
3.39
3.65
1.05
1.80
2.10
1.40
1.87
2.34
2.80
3.26
3.73
4.19
4.66
5.12
5.59
6.02
6.52
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
* 750 MCM not UL Listed
NSi 7
Polaris Connectors
INSULATED MULTI-CABLE CONNECTOR BLOCKS – WIRE ENTRY EITHER SIDE
IPLD SERIES
The IPLD Series connectors are insulated with high-dielectric strength plastisol.
Molded for precise fit and supplied with removable access plugs over the hex
screws. Wire entry ports on both sides of the connector allow for access from
either side. Supplied with removable plugs to close the entry port not being
utilized. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45°C.
Dual rated for use with copper and/or aluminum cables. Rated 600 V, 90°C.
Not recommended for fine-stranded, flexible wire. To receive the material in
bags, add “-B” to the part number.
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
IPLD 3/0-3
IPLD 3/0-4
IPLD 3/0-5
IPLD 3/0-6
IPLD 3/0-7
IPLD 3/0-8
IPLD 3/0-9
IPLD 3/0-10
IPLD 3/0-11
IPLD 3/0-12
IPLD 250-3
IPLD 250-4
IPLD 250-5
IPLD 250-6
IPLD 250-7
IPLD 250-8
IPLD 250-9
IPLD 250-10
IPLD 250-11
IPLD 250-12
IPLD 350-3
IPLD 350-4
IPLD 350-5
IPLD 350-6
IPLD 350-7
IPLD 350-8
IPLD 350-9
IPLD 350-10
IPLD 350-11
IPLD 350-12
IPLD 500-3
IPLD 500-4
IPLD 500-5
IPLD 500-6
IPLD 500-7
IPLD 500-8
IPLD 500-9
IPLD 500-10
IPLD 500-11
IPLD 500-12
IPLD 600-3
IPLD 600-4
IPLD 600-5
IPLD 600-6
IPLD 600-7
IPLD 600-8
92701
92702
92703
92704
92705
92706
92707
92708
92709
92710
92301
92302
92303
92304
92305
92306
92307
92308
92309
92310
92401
92402
92403
92404
92405
92406
92407
92408
92409
92410
92501
92502
92503
92504
92505
92506
92507
92508
92509
92510
78950
78951
78952
78953
78954
78955
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
250-6
250-6
250-6
250-6
250-6
250-6
250-6
250-6
250-6
250-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
600-6
600-6
600-6
600-6
600-6
600-6
2.63
3.38
4.13
4.94
5.75
6.50
7.25
8.00
8.88
9.63
2.99
3.85
4.71
5.57
6.43
7.29
8.16
9.02
9.88
10.74
3.52
4.57
5.62
6.67
7.72
8.77
9.82
10.87
11.92
12.97
4.01
5.16
6.23
7.45
8.59
9.74
10.88
12.03
13.17
14.32
4.72
5.96
7.20
8.38
9.68
10.92
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
2.13
2.13
2.13
2.13
2.13
2.13
2.13
2.13
2.13
2.13
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
3.05
3.05
3.05
3.05
3.05
3.05
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.81
2.81
2.81
2.81
2.81
2.81
2.81
2.81
2.81
2.81
2.95
2.95
2.94
2.94
2.95
2.95
8 NSi
Fax: 800.841.5566 Phone: 1.800.321.5847
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
1/4
6
6
4
4
3
3
3
2
2
2
6
6
4
4
3
3
3
2
2
2
4
3
3
3
2
2
2
2
1
1
3
3
2
2
2
2
2
1
1
1
3
3
2
2
2
2
.31
.41
.52
.62
.71
.81
.90
1.00
1.10
1.20
.35
.47
.58
.70
.81
.93
1.04
1.16
1.27
1.39
.59
.77
.96
1.14
1.32
1.50
1.68
1.86
2.04
2.22
.79
1.05
1.31
1.57
1.83
2.09
2.35
2.61
2.87
3.13
1.55
1.70
1.85
2.15
2.50
2.85
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
Polaris Connectors
INSULATED MULTI-CABLE CONNECTOR BLOCKS – WIRE ENTRY EITHER SIDE
IPLD SERIES CONTINUED
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
IPLD 600-9
IPLD 600-10
IPLD 600-12
IPLD 750-3*
IPLD 750-4*
IPLD 750-5*
IPLD 750-6*
IPLD 750-7*
IPLD 750-8*
IPLD 750-9*
IPLD 750-10*
IPLD 750-11*
IPLD 750-12*
78956
78957
78957
92601
92602
92603
92604
92605
92606
92607
92608
92609
92610
9
10
12
3
4
5
6
7
8
9
10
11
12
600-6
600-6
600-6
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
12.39
13.67
16.17
4.90
6.33
7.75
9.18
10.69
12.19
13.69
15.19
16.69
18.19
3.05
3.05
3.05
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
2.95
2.95
2.95
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
5/16
2
1
1
3
2
1
1
1
1
1
1
1
1
3.30
3.65
4.45
1.40
1,87
2.34
2.80
3.26
3.73
4.19
4.66
5.12
5.59
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
* 750 MCM not UL Listed.
TM
Take a close look.
• Insulated with high-dielectric strength plastisol
• Molded for precise fit and supplied with removable
access plugs over the hex screws
• Option with wire entry ports on both sides of the
connector allow for access from either side
• Supplied with removable plugs to close the entry
port not being utilized
• Eliminates the need for cover and taping
• Abrasion and chemical resistant
• UV rated
NSi 9
Polaris Connectors
WIRE ENTRY FROM EITHER SIDE
IPLDH SERIES – HEAVY DUTY
Heavy duty IPLDH Series connectors are
designed, built and tested to handle even the
most demanding applications from 250 MCM to
750 MCM. The connectors are insulated with highdielectric strength plastisol which is molded for
a precise fit. They are supplied with removable
access plugs to allow for cable entry from either
side of the connector. The connector block is double the size of the standard IPLD Series connector
and there are also two pressure
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
IPLDH750-3
IPLDH750-4
IPLDH750-5
IPLDH750-6
IPLDH750-7
IPLDH750-8
IPLDH750-9
IPLDH750-10
92650
92651
92652
92653
92654
92655
92656
92657
3
4
5
6
7
8
9
10
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
5.00
6.40
7.80
9.15
10.50
11.90
13.25
14.60
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
screws provided for each cable to ensure the best
connection possible. Eliminates the need for cover
and taping. Abrasion and chemical
resistant. UV rated. Will not support combustion.
Cold temperature rated to -45°C. Dual rated for
use with copper and/or aluminum cables. Rated
600 V, 90°C. Not recommended for fine-stranded,
flexible wire. To receive the material in bags, add
“-B” to the part number.
HEX
SIZE
CTN.
QTY.
5/16
2
2
1
1
1
1
1
1
5/16
5/16
5/16
5/16
5/16
5/16
5/16
WEIGHT
LBS./EA
2.52
3.37
4.21
4.95
5.87
6.60
7.54
8.20
PLH SERIES – HEAVY DUTY
Heavy duty PLH Series connectors are designed, built
and tested to handle even the most demanding applications from 250 MCM to 750 mcm. The uninsulated
connector block is double the size of the standard
PL Series connector and there are also two pressure
screws provided for each cable to ensure the best
connection possible. Dual rated for use with copper
and/or aluminum cables. Plated for corrosion resistance. Rated 600 V, 90°C. Not recommended for
fine-stranded, flexible wire.
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
PLH750-2
PLH750-3
PLH750-4
PLH750-5
PLH750-6
PLH750-7
PLH750-8
PLH750-9
PLH750-10
92670
92671
92672
92673
92674
92675
92676
92677
92678
2
3
4
5
6
7
8
9
10
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
750 - 250 MCM
3.16
4.56
6.00
7.36
8.76
10.16
11.55
12.90
14.30
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
10 NSi
Fax: 800.841.5566 Phone: 1.800.321.5847
HEX
SIZE
CTN.
QTY.
5/16
2
2
1
1
1
1
1
1
1
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
WEIGHT
LBS./EA
1.10
1.92
2.73
3.51
4.33
5.11
5.92
6.70
7.51
Polaris Connectors
WITH MOUNTING HOLES – WIRE ENTRY FROM ONE SIDE
IPLM SERIES
Dual rated for use with copper and/or aluminum
cables. Rated 600 V, 90°C. Mounting holes will
accept a 1/4” bolt. Not recommended for finestranded, flexible wire. To receive the material in
bags, add “-B” to the part number.
IPLM Series connectors are insulated with highdielectric strength plastisol. Molded for precise fit
and supplied with removable access plugs over
the hex screws. Wire entry ports on one side
only. The mounting holes at each end of the
connector allow for direct isolated mounting to
the trough, panel or wireway. Eliminates the
need for cover and taping. Abrasion and
chemical resistant. UV rated. Will not support
combustion. Cold temperature rated to -45°C.
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
IPLM 4-3
IPLM 4-4
IPLM 4-5
IPLM 4-6
IPLM 4-7
IPLM 4-8
IPLM 4-9
IPLM 4-10
IPLM 4-11
IPLM 4-12
IPLM 4-13
IPLM 4-14
IPLM 1/0-3
IPLM 1/0-4
IPLM 1/0-5
IPLM 1/0-6
IPLM 1/0-7
IPLM 1/0-8
IPLM 1/0-9
IPLM 1/0-10
IPLM 1/0-11
IPLM 1/0-12
IPLM 1/0-13
IPLM 1/0-14
93001
93002
93003
93004
93005
93006
93007
93008
93009
93010
93011
93012
93101
93102
93103
93104
93105
93106
93107
93108
93109
93110
93111
93112
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
3.54
3.97
4.39
4.82
5.32
5.65
6.07
6.50
6.92
7.10
7.76
8.18
4.27
4.92
5.57
6.22
6.87
7.52
8.17
8.82
9.47
10.12
10.77
11.42
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
6
6
4
4
4
4
3
3
3
2
2
2
6
6
4
4
4
4
3
3
3
2
2
2
.15
.19
.22
.26
.29
.32
.36
.39
.43
.45
.49
.52
.28
.36
.43
.50
.58
.66
.73
.81
.88
.96
1.03
1.11
NSi 11
Polaris Connectors
WITH MOUNTING HOLES – WIRE ENTRY FROM EITHER SIDE
IPLMD SERIES
IPLMD Series connectors are insulated with high-dielectric strength plastisol.
Molded for precise fit and supplied with removable access plugs over the hex
screws. Wire entry ports on both sides of the connector allow for access from
either side. Supplied with removable access plugs to close the entry port not being
used. The mounting holes at each end of the connector allow for direct isolated
mounting to the trough, panel or wireway. Eliminates the need for cover and
taping. Abrasion and chemical resistant. UV rated. Will not support combustion.
Cold temperature rated to -45°C. Dual rated for use with copper and/or aluminum
cables. Rated 600 V, 90°C. Not recommended for fine-stranded, flexible wire. To
receive the material in bags, add “-B” to the part number.
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
IPLMD 3/0-3
IPLMD 3/0-4
IPLMD 3/0-5
IPLMD 3/0-6
IPLMD 3/0-7
IPLMD 3/0-8
IPLMD 3/0-9
IPLMD 3/0-10
IPLMD 3/0-11
IPLMD 3/0-12
IPLMD 250-3
IPLMD 250-4
IPLMD 250-5
IPLMD 250-6
IPLMD 250-7
IPLMD 250-8
IPLMD 250-9
IPLMD 250-10
IPLMD 250-11
IPLMD 250-12
IPLMD 350-3
IPLMD 350-4
IPLMD 350-5
IPLMD 350-6
IPLMD 350-7
IPLMD 350-8
IPLMD 350-9
IPLMD 350-10
IPLMD 350-11
IPLMD 350-12
IPLMD 500-3
IPLMD 500-4
IPLMD 500-5
IPLMD 500-6
IPLMD 500-7
IPLMD 500-8
IPLMD 500-9
IPLMD 500-10
IPLMD 500-11
IPLMD 500-12
93221
93222
93223
93224
93225
93226
93227
93228
93229
93230
94301
94302
94303
94304
94305
94306
94307
94308
94309
94310
94401
94402
94403
94404
94405
94406
94407
94408
94409
94410
94501
94502
94503
94504
94505
94506
94507
94508
94509
94510
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
9
10
11
12
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
250-6
250-6
250-6
250-6
250-6
250-6
250-6
250-6
250-6
250-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
3.85
4.65
5.45
6.25
7.05
7.85
8.60
9.45
10.25
11.00
4.59
5.45
6.31
7.17
8.03
8.89
9.76
10.62
11.48
12.34
5.12
6.17
7.22
8.27
9.32
10.37
11.42
12.47
13.52
14.57
5.61
6.76
7.83
9.05
10.19
11.34
12.48
13.63
14.77
15.92
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.13
2.13
2.13
2.13
2.13
2.13
2.13
2.13
2.13
2.13
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.44
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
2.94
1.82
1.82
1.82
1.82
1.82
1.82
1.82
1.82
1.82
1.82
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.81
2.81
2.81
2.81
2.81
2.81
2.81
2.81
2.81
2.81
Note: Mounting holes will accept a 1/4” bolt for 3/0 AWG and a 5/16” bolt for 250 MCM and 350 MCM.
12 NSi
Fax: 800.841.5566 Phone: 1.800.321.5847
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
1/4
3
3
2
2
2
2
2
2
1
1
2
2
2
2
2
2
2
2
1
1
2
2
2
2
2
2
2
1
1
1
2
2
2
2
2
2
2
1
1
1
.37
.48
.59
.70
.80
.91
1.02
1.12
1.24
1.35
.59
.71
.81
.94
1.05
1.17
1.28
1.40
1.51
1.63
.95
1.13
1.32
1.50
1.68
1.86
2.04
2.22
2.40
2.58
1.29
1.55
1.81
2.07
2.33
2.59
2.85
3.11
3.37
3.63
1/4
1/4
/4
1/4
1
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
MAKING AN
EASY
CONNECTION
Connecting you to the products you need:
• Direct
Burial
• Submersible
• Multi-Cable Connectors
• Polaris Grey™
• Corrosion
Resistant PL series
• Polaris Blue™
• 2 Wire Connector IT series
• Custom Designed Polaris
Thousands of quality products that make
life in the field easier and safer.
YOUR REPRESENTATIVE:
NSi Industries LLC Huntersville, North Carolina USA
Fax: 800.841.5566
Phone Toll Free: 1.800.321.5847 www.nsiindustries.com
Polaris Connectors
WITH MOUNTING HOLES – WIRE ENTRY FROM EITHER SIDE
IPLMD SERIES CONTINUED
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
IPLMD 750-3*
IPLMD 750-4*
IPLMD 750-5*
IPLMD 750-6*
IPLMD 750-7*
IPLMD 750-8*
IPLMD 750-9*
IPLMD 750-10*
IPLMD 750-11*
IPLMD 750-12*
94601
94602
94603
94604
94605
94606
94607
94608
94609
94610
3
4
5
6
7
8
9
10
11
12
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
6.50
7.93
9.35
10.78
12.20
13.63
15.05
16.48
17.90
19.33
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
3/8
1
1
1
1
1
1
1
1
1
1
2.30
2.77
3.24
3.70
4.16
4.63
5.09
5.56
6.02
6.49
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
*750 MCM not UL Listed
Note: Mounting holes will accept a 5/16” bolt for 250 MCM and 350 MCM and a 3/8” bolt for 500 MCM and 750 MCM.
NSi 13
Polaris Connectors
UNINSULATED MULTI-CABLE CONNECTOR BLOCKS
PL SERIES
PL Series connectors are made from 6061-T6 aluminum alloy and are
plated for corrosion resistance. They are stocked in one hole increments,
up to 14 holes and are suitable for use on wire from #4 AWG to 750 MCM.
Dual rated for use with copper and/or aluminum cables. Rated 600 V,
90°C. Not recommended for fine-stranded, flexible wire.
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
PL 4-3
PL 4-4
PL 4-5
PL 4-6
PL 4-7
PL 4-8
PL 4-9
PL 4-10
PL 4-11
PL 4-12
PL 4-13
PL 4-14
PL 1/0-3
PL 1/0-4
PL 1/0-5
PL 1/0-6
PL 1/0-7
PL 1/0-8
PL 1/0-9
PL 1/0-10
PL 1/0-11
PL 1/0-12
PL 1/0-13
PL 1/0-14
PL 3/0-3
PL 3/0-4
PL 3/0-5
PL 3/0-6
PL 3/0-7
PL 3/0-8
PL 3/0-9
PL 3/0-10
PL 3/0-11
PL 3/0-12
PL 3/0-13
PL 3/0-14
PL 250-3
PL 250-4
PL 250-5
PL 250-6
PL 250-7
PL 250-8
90001
90002
90003
90004
90005
90006
90007
90008
90009
90010
90011
90012
90101
90102
90103
90104
90105
90106
90107
90108
90109
90110
90111
90112
90201
90202
90203
90204
90205
90206
90207
90208
90209
90210
90211
90212
90301
90302
90303
90304
90305
90306
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
4-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
1/0-14
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
3/0-6
250-6
250-6
250-6
250-6
250-6
250-6
1.30
1.73
2.15
2.57
2.99
3.41
3.84
4.26
4.68
5.10
5.52
5.95
2.01
2.66
3.31
3.96
4.61
5.26
5.91
6.56
7.21
7.86
8.51
9.16
2.37
3.15
3.93
4.71
5.49
6.27
7.05
7.83
8.61
9.39
10.17
10.95
2.69
3.55
4.41
5.27
6.14
7.00
.62
.62
.62
.62
.62
.62
.62
.62
.62
.62
.62
.62
.87
.87
.87
.87
.87
.87
.87
.87
.87
.87
.87
.87
.94
.94
.94
.94
.94
.94
.94
.94
.94
.94
.94
.94
1.12
1.12
1.12
1.12
1.12
1.12
.50
.50
.50
.50
.50
.50
.50
.50
.50
.50
.50
.50
.62
.62
.62
.62
.62
.62
.62
.62
.62
.62
.62
.62
.69
.69
.69
.69
.69
.69
.69
.69
.69
.69
.69
.69
.87
.87
.87
.87
.87
.87
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
Slotted
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
12
12
6
6
6
6
6
4
4
4
2
2
12
12
6
6
6
6
6
4
4
4
2
2
6
6
6
6
6
6
4
4
3
3
2
2
6
6
6
6
6
6
.04
.05
.06
.08
.09
.10
.11
.12
.14
.15
.16
.17
.10
.14
.17
.20
.24
.27
.30
.34
.37
.40
.44
.47
.15
.19
.24
.29
.33
.38
.43
.47
.52
.57
.61
.66
.18
.24
.30
.33
.42
.48
14 NSi
Fax: 800.841.5566 Phone: 1.800.321.5847
Polaris Connectors
UNINSULATED MULTI-CABLE CONNECTOR BLOCKS
PL SERIES CONTINUED
CATALOG
NO.
UPC
NO.
NO. OF
PORTS
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
PL 250-9
PL 250-10
PL 250-11
PL 250-12
PL 250-13
PL 250-14
PL 350-3
PL 350-4
PL 350-5
PL 350-6
PL 350-7
PL 350-8
PL 350-9
PL 350-10
PL 350-11
PL 350-12
PL 350-13
PL 350-14
PL 500-3
PL 500-4
PL 500-5
PL 500-6
PL 500-7
PL 500-8
PL 500-9
PL 500-10
PL 500-11
PL 500-12
PL 500-13
PL 500-14
PL 750-3*
PL 750-4*
PL 750-5*
PL 750-6*
PL 750-7*
PL 750-8*
PL 750-9*
PL 750-10*
PL 750-11*
PL 750-12*
PL 750-13*
PL 750-14*
90307
90308
90309
90310
90311
90312
90401
90402
90403
90404
90405
90406
90407
90408
90409
90410
90411
90412
90501
90502
90503
90504
90505
90506
90507
90508
90509
90510
90511
90512
90601
90602
90603
90604
90605
90606
90607
90608
90609
90610
90611
90612
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
3
4
5
6
7
8
9
10
11
12
13
14
250-6
250-6
250-6
250-6
250-6
250-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
350-6
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
500-4
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
750-250
7.86
8.72
9.58
10.45
11.31
12.17
3.22
4.27
5.32
6.37
7.42
8.47
9.52
10.57
11.62
12.67
13.72
14.77
3.70
4.85
5.99
7.14
8.28
9.43
10.57
11.72
12.86
14.01
15.15
16.30
4.57
6.00
7.42
8.85
10.27
11.70
13.12
14.55
15.97
17.40
18.82
20.25
1.12
1.12
1.12
1.12
1.12
1.12
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
1.62
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
.87
.87
.87
.87
.87
.87
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
5/16
4
4
3
3
2
2
6
6
6
6
4
4
2
2
2
1
1
1
4
4
4
3
3
3
2
2
1
1
1
1
3
3
2
2
2
1
1
1
1
1
1
1
.53
.59
.65
.71
.77
.83
.32
.44
.56
.67
.76
.84
.93
1.12
1.21
1.32
1.42
1.51
.46
.62
.77
.92
1.0
1.23
1.38
1.53
1.68
1.84
1.99
2.14
.51
.68
.85
1.02
1.18
1.35
1.52
1.69
1.86
2.03
2.19
2.36
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
*750 MCM not UL Listed
NSi 15
Polaris Connectors
CUSTOM-DESIGNED CONNECTOR BLOCKS
Let us custom engineer and fabricate a UL Listed insulated block system for your next project. Each connector
is made with exact hole size and number for the cable
runs being used. You may choose to order a customized version of our IPL Series or add one or more of the
options listed below. With the numerous configurations
and many options available, the combinations we can
create and produce are almost unlimited. Connector size
can be up to 22” long and is available with or without
insulation. Rated 600 V, 90°C.
We custom design a computer program from your
specifications and our engineering and production data
and put it in our computerized machining system. Your
blocks are then directly and precisely machined. We
then cover the block with our unique plastisol insulation
material/process. Shipment is made within 3 to 4 days!
Custom connectors are not returnable.
MOUNTING CAPABILITY
(Letter designation “M”)
Mounting holes can be added at each end of the connector block for situations where it must
be bolted in place. The mounting holes are provided in each end of the connector block and
are isolated from the block with insulated sleeves. When building a custom part number, add
the designation “M” to the prefix.
OFFSET WIRE ENTRY
(Letter designation “O”)
With this designation, the cable can enter either side of the connector block, based upon your
requirements. As shown here, the two primary cables enter from one direction, while the
secondary cables enter the opposite side from the opposite direction. This eliminates having to
bend the cable around the connector. Any combination of our eight basic sizes can be incorporated in these connectors. When building a custom part number, add the designation “O”
immediately prior to the ports that you want to enter from the opposite side.
STACKED WIRE HOLES
(Letter designation “S”)
Custom connector blocks can be supplied with one row of wire entry holes on top of the other.
This allows the block to be shorter in length and is ideal for use in small wire ways or panels.
When building a custom part number, add the designation “S” immediately prior to the ports
that you want stacked.
CUSTOM-DESIGNED POLARIS GREY
We can design a connector which will handle any combination and number of fine-stranded
wires between the sizes of 14 AWG and 3/0 AWG.
All wire ports can be on one side or opposing sides. The ports can be side by side, or
stacked on top of each other. Require mounting holes? Also no problem. Essentially, we can
do whatever you want, and ship it in three or four days! And best of all, your custom-designed
connector is UL Listed.
16 NSi
Fax: 800.841.5566 Phone: 1.800.321.5847
Polaris Connectors
CUSTOM-DESIGNED CONNECTOR BLOCKS
How to Build a Custom Catalog Number
Creating a custom catalog number may appear complex at first.
In fact, it’s quite simple, if you ask yourself the following questions and build your catalog number as you go.
1. Do you require an insulated block? If yes, start with the letter
“I”. If no, start with the letter “U”.
2. Do you require mounting capability? If yes, add the letter
“M”. If no, add nothing.
3. Now, you need to add the number of ports and size of wire
holes (using the letter designation for the wire size as listed
WIRE HOLE SIZES
below). You may add one size, i.e., 4F (4 ports of 500 MCM)
or many sizes, i.e., 4F6B2D (4 ports of 500 MCM, 6 ports of
1/0 and 2 ports of 250 MCM).
4. If you require any ports entering from the opposite direction,
group them at the end of the catalog number and use the
designation “O” immediately prior to the listing of these ports.
5. If you require any ports to be stacked, group them at the end
of the catalog number and use the designation “S” immediately prior to the listing of these ports.
ACCESSORIES
WIRE
RANGE
LETTER
DESIGNATION
CATALOG
NO.
UPC
NO.
DESCRIPTION
CONNECTOR
SIZE
CARTON
QTY.
4-14
1/0-14
3/0-6
250-6
350-6
500-4
750-250
1000-500
A
B
C
D
E
F
G
H
SP-4
SP-1/0
SP-3/0
SP-250
SP-350
SP-500
SP-750
CP-3/0
CP-250
CP-350
CP-500
CP-750
95201
95202
95203
95204
95205
95206
95207
95210
95211
95212
95213
95214
Set screw covers
Set screw covers
Set screw covers
Set screw covers
Set screw covers
Set screw covers
Set screw covers
Cable port plugs
Cable port plugs
Cable port plugs
Cable port plugs
Cable port plugs
4 AWG
1/0 AWG
3/0 AWG
250 MCM
350 MCM
500 MCM
750 MCM
3/0 AWG
250 MCM
350 MCM
500 MCM
750 MCM
15
15
15
12
10
8
6
15
10
8
6
4
Assembly of Connectors
Wire insulation must be stripped in accordance with the Strip
Chart below for Standard Connectors. The wire insulation on
a properly installed wire must be inside the insulated connector conductor port no less than 3/8 inch. Pressure screws must be
secured at the torque value corresponding to the wire size and
connector size shown to the right. The UL listing is for stranded
wire only. AL/CU 600 V max. for building wire and 1000 V
max. for signs or fixtures. When installing Mounting Connectors,
STRIP CHART FOR STANDARD CONNECTORS
use the Strip Chart below to select the appropriate mounting
bolt. Do not exceed 80 inch pounds.
When installing Custom Connectors, wire insulation must be
stripped such that when the wire is inserted into the conductor
port, there is a minimum of 1/4 inch insulation inside the conductor port. Insert the stripped wire until it stops against the back of
the connector.
TORQUE CHART
CONNECTOR
SIZE
STRIP
LENGTH
BOLT DIA.
FOR MOUNTING
WIRE
SIZE
750 H
ISRH 750
750 MCM
500 MCM
350 MCM
250 MCM
ISR 250
3/0 SWG
1/0 AWG
4 AWG
3.250
2.312
2.000
1.625
1.375
1.250
1.125
1.000
0.875
0.689
5/16
800-1000
600-750
500
400
350
250
4/0
3/0
2/0
1/0
#3-#1
#4-#6
#8
#10-#14
5/16
5/16
5/16
5/16
5/16
5/16
1/4
1/4
3/16
1000
550
550
450
750
500
550
450
425
400
360
450
425
400
360
250
250
180
180
150
110
CONNECTOR SIZE
350
250
3/0
1/0
#4
Tightening Torque
in inch/lbs.
400
360
250
250
180
180
150
110
360
250
250
180
180
150
110
250
180
180
150
110
180
150
110
75
35
45
40
35
NSi 17
Polaris Connectors
STACKED CONNECTORS
STACKED CONNECTORS
1
2
With Polaris Stacked 3Connectors you will4enjoy all the benefits 5of standard Polaris
6
connectors with an added space-saving bonus. Wire entry holes are stacked on top of
each other for the ultimate in compact design. Exceptional for use with large wire sizes,
especially in tight-fitting spaces, small wire ways and panels. The wire holes on the
bottom row allow for entry from either side of the connector for even greater versatility.
Supplied with removable plugs to close the entry port not being utilized. Abrasion and
chemical resistant. UV rated. Will not support combustion. Cold temperature rated to
-45°C. Dual rated for use with copper and/or aluminum cables. Rated 600 V, 90°C.
Not recommended for fine-stranded flexible wire.
CATALOG
NO.
UPC
NO.
NO. OF
PORTS•
WIRE
RANGE
LENGTH
(INCHES)
HEIGHT
WIDTH
IPLDS 350-6
IPLDS 350-8
IPLDS 350-10
IPLDS 350-12
IPLDS 500-6
IPLDS 500-8
IPLDS 500-10
IPLDS 500-12
IPLDS 750-6*
IPLDS 750-8*
IPLDS 750-10*
IPLDS 750-12*
95165
95166
95167
95168
95169
95170
95171
95172
95173
95174
95175
95176
6
8
10
12
6
8
10
12
6
8
10
12
350-6
350-6
350-6
350-6
500-4
500-4
500-4
500-4
750-250
750-250
750-250
750-250
3.52
4.57
5.62
6.67
4.01
5.16
6.23
7.45
4.90
6.33
7.75
9.18
3.50
3.50
3.50
3.50
4.32
4.32
4.32
4.32
5.00
5.00
5.00
5.00
4.00
4.00
4.00
4.00
4.69
4.69
4.69
4.69
5.06
5.06
5.06
5.06
• Refers to total number of ports, i.e. 8 ports would be 4 ports on bottom row and 4 ports on the top row.
* 750 MCM not UL Listed.
18 NSi
Fax: 800.841.5566 Phone: 1.800.321.5847
HEX
SIZE
CARTON
QTY.
WEIGHT
LBS./EA
5/16
2
2
1
1
2
2
1
1
1
1
1
1
2.01
2.64
3.27
3.89
2.91
3.76
4.62
5.46
3.93
5.10
6.26
7.42
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
Alphanumeric
Index
CATALOG NUMBER
PAGE
CP . . . . . . . . . .
17
IPL . . . . . . . . . . . 6-7
NSi Industries LLC
Vendor Number: 662381
9730 Northcross Center Ct.
Huntersville,
North Carolina USA
28078
IPLD . . . . . . . . . . 8-9
IPLDH . . . . . . . . . 10
IPLDS . . . . . . . . . 18
IPLG . . . . . . . . . . . 5
IPLM. . . . . . . . . . 11
IPLMD . . . . . . 12-13
Phone Toll Free:
800.321.5847
IPLW . . . . . . . . . . 3
ISR . . . . . . . . . . . . 1
ISRH. . . . . . . . . . . 1
ISW . . . . . . . . . . . 3
IT . . . . . . . . . . . . . 1
ITW . . . . . . . . . . . 3
ITG . . . . . . . . . . . 5
Terms of Sale
Fax Toll Free:
800.841.5566
ITH. . . . . . . . . . . . 1
ITO . . . . . . . . . . . 1
ITOG . . . . . . . . . . 5
1. Prices are F.O.B. our plant.
2. Prices do not include any sales tax.
3. Freight charges will be prepaid on all
orders $250.00 and over shipping
within continental USA using standard
shipping methods and service.
4. Minimum order – $100.00.
5. Claims for shortage, erroneous charges
or price corrections shall be deemed
waived unless made in writing, delivered to NSi within 30 days of invoice.
6. Terms of payment – 2% 10th prox. net
25th following.
7. Warranties – NSi guarantees all
products to be free of defects in material and workmanship for a period of
90 days from date of sale. Any claims
for defective material must be agreed
to in writing by NSi. Defective material
will be replaced on an F.O.B. – our
factory basis. NSi disclaims the implied
warranty of fitness for a particular
application.
PL . . . . . . . . . 14-15
PLH . . . . . . . . . . 10
SP . . . . . . . . . . . 17
SITG. . . . . . . . . . . 5
Email:
[email protected]
Other Products
Available
NSi can provide many other products for
special applications which are not listed in
this catalog. If you require an item which
you do not find listed, please contact
us. We would be pleased to provide a
quotation upon receipt of a drawing or a
sample.
Website:
Guarantee
It is our goal to provide extraordinary
products and service on a daily basis.
If our products or service do not meet
with your satisfaction, please let us know
immediately and we promise to make
every reasonable effort to remedy the
situation.

www.nsiindustries.com • Fax: 800.841.5566 • Phone: 1.800.321.5847

Transcription

Similar documents