2015 Catalog - Renegade Armor

Transcription

2015 Catalog - Renegade Armor
PRODUCTS &
SERVICES / 2015
A
fter another successful year of business,
Renegade Armor would like to thank all
of our loyal customers and supporters.
This has been a busy one for us! We moved and
upgraded our production facility to better keep up
with increased demand, certified another three
ballistic packages, and we are in line to certify six
more in the following months.
The NOC is our newest concealable, and based
on the positive feedback has been well received
over this last year. Implementation of this ground
breaking product will continue to be a strong
focus for Renegade in 2015. We have designed an
entire line of NOC products to match any situation.
Our focus is to accommodate the customer in all
facets, and make the necessary changes along the
way to provide a more efficient product.
Building quality product that saves lives has
always driven us to new levels of execution. With
that in mind, we have turned our eye to reworking
all of our vest platforms. We need to lose weight,
become more user friendly, and keep our prices
reasonable. In a market that is stagnant, you will
see many more innovations from Renegade in the
months to come.
TABLE OF CONTENTS
Ballistic Options / 2
Soft Armor Inserts / 3
Concealable Vests / 4
Concealable Accessories / 10
NOC Platform / 14
Tactical Vests / 16
Tactical Accessories / 26
Pouches / 31
Helmets / 32
Helmet Accessories / 36
Correctional Armor / 38
Hard Armor / 39
BALLISTIC OPTIONS
SOFT ARMOR INSERTS
1.5
1.4
REN-3LCBP
REN-3LCBP-F
1.2
($)+
TT-FF-IIIA ($$)
REN-3XA ($$)
1.1
REN-3BFA ($$)
PRO1LII ($$)
1.0
WEIGHT lb/ft²
LEG1L3A ($$)
PRV3L3A ($)
1.3
REN-FRNR-3A-F
REN-FRNR-3A
REN-2BFA ($$)
.9
REN-2DP
REN-2DP-F
.8
($$$)
($)+
REN-BALCSINSRT / BALCS
REN-MBAVINSRT / MBAV
REN-SAPIINSRT / SAPI
(Body Armor Load Carriage System)
(Modular Body Armor Vest)
(Small Arms Protective Insert)
This is a standard U.S. Military cut
that is available in any of the armor
packages we offer. Available sizes are
S, M, L and XL.
This is another standard designation
for U.S. Military vests. MBAV panels
are available in S, M, L and XL
sizes in any of the armor packages
we produce.
SAPI cut inserts can be used alone or
in conjunction with hard armor plates.
SAPI cut panels are available in S, M,
L, XL sizes in any armor package
we offer.
REN-FURYINSRT / FURY
REN-NOCINSRT / NOC
REN-NOCRINSRT / NOC-R
Our Fury panel answers the call for
traditional cut concealable ballistics.
The Fury panel is available in custom
sizes in any of the armor packages
we produce.
The NOC panel system is the armor
inside the revolutionary NOC
concealable vest. NOC panels are
available in all NOC sizes and in any
armor package we produce.
The NOC-R panel system is
specifically cut for our female NOC
concealed vest and the DOOR NOC-R
outer carrier. NOC-R panels are
available in all NOC-R sizes and in
any armor packages we produce.
REN-BREACHINSRT / BREACH
REN-ASSAULTINSRT / ASSAULT
The largest armor cut offered by
Renegade. Available sizes are S, M, L
XL, XXL and XXXL.
Smaller than an entry vest, larger than
a plate carrier. Available sizes are S/M
and L/XL.
.7
.6
PRV1SP2 ($$)
REN-SP2 ($$)
.5
REN-SP1 ($$)
.4
.3
NIJ - Spike 1
NIJ - Spike 2
NIJ Level II
NIJ Level IIIA
SPIKE
Present
NIJ Level IIIA + IOTV Frag/DEA/FBI
BALLISTIC PERFORMANCE
Future
($) Low cost ($$) Mid range
($$$) High end
+ Low cost option
FEM = Female
PRIME NIJ THREAT ROUNDS
LEVEL IIA
2
LEVEL II
LEVEL IIIA
LEVEL III
LEVEL IV
Test Bullet
9 mm FMJ RN
40 S&W FMJ
9 mm FMJ RN
.357 Mag JSP
.357 Sig FN
.44 Mag SJHP
7.62 mm NATO FMJ
30 CAL M2 AP
Weight
124 gr
180 gr
124 gr
158 gr
125 gr
240 gr
147 gr
166 gr
Velocity
1225 ft/s
1155 ft/s
1305 ft/s
1430 ft/s
1470 ft/s
1430 ft/s
2780 ft/s
2880 ft/s
renegade-armor.com | 540.656.2851
3
NOC
FURY
SENTRY
ATHENA
TETON
ATLAS
HAVOC
STEALTH
CONCEALABLE VESTS
Concealable body armor is the most commonly worn armor in the United States. Recognizing this,
Renegade’s design team set out to reinvent the category. We worked directly with users at every
level of law enforcement and within the military to fully understand the demands of their work and
then integrate our armor solutions into these various missions. We sought to build the armor around
the mission and not the other way around. We think the results speak for themselves and we’re
confident you will as well.
4
RENEGADE ARMOR | Products & Services
renegade-armor.com | 540.656.2851
5
REN-NOC / NOC
REN-FURY / FURY
REN-SENTRY / SENTRY
REN-ATHENA / ATHENA
The NOC is the latest innovation from Renegade. The NOC
is everything a user could want it to be. Fully modular,
highly adaptable and most importantly comfortable.
This low visibility concealable carrier system excels at
operating in environments where discretion is necessary
but protection is needed. Utilizing fabric technology and
design to help maintain a cool temperature and reduce
odor for the wearer, the Fury is suited to adapt to the most
extreme environments for an extended period of time.
The Fury’s affordable counterpart, manufactured for cost
effectiveness w
ithout compromising protection, this
carrier has a customized fit and lightweight comfort.
The ultimate in concealed comfort, protection, and stateof-the-art ergonomic design allows 8 to 12 hours wear
without bulky darts or seams.
FEATURES
FEATURES
FEATURES
• Slim design
• Reinforced, highly durable strapping to prevent sag
and rolling
• Modular side panels can be replaced with larger/smaller
panels if individual sizing changes or can be removed if
not necessary
• Moisture wicking anti-microbial fabric
• External plate pocket: holds special threat (Light Fighter)
plates and/or traditional soft trauma inserts
• Works as a replacement to traditional female concealed
armor (NOC-R): vest contours to female body shape
much better than traditional concealed vest
• Internal ballistic suspension system
• Independent side panel suspension
OPTIONS
FEATURES
• Custom Sizing
• Spacer Net Technology: moisture wicking interior
• Cool touch external microfiber fabric
• Internal hook loop suspension system
• Removable ballistic inserts
• External pocket and 5x8 soft trauma pack
• Fully adjustable suspension system
• Internal hook & loop suspension system
• Removable ballistic inserts
• External pocket and 5x8 Soft trauma pack
• Fully adjustable suspension system
• 4 point sizing adjustability
• Internal armor suspension system
• 5”X8” soft trauma pack
• Cool-to-the-touch micro-denier outer fabric
• Body-side wicking-cool mesh
• Adjustable 12 point removable closure system
• Body side-loading system
• Internal ballistic suspension system
OPTIONS
OPTIONS
• Special threat plate
• Fixed pocket outer carrier (1984)
• Mission specific MOLLE carrier (Helix)
• Shirt tails
• Special threat plates
• Shirt tails
OPTIONS
• Special threat plates
• Deluxe straps
• Laser engraved identification
• Shirt tails
• Laser engraved identification
• Deluxe straps
• Cordura nylon cover option
• Special threat plates
NOC CUT
AVAILABLE COLORS
Coyote
6
Navy
Black
RENEGADE ARMOR | Products & Services
White
FURY CUT
AVAILABLE COLORS
Coyote
Navy
Black
White
FURY CUT
AVAILABLE COLORS
Coyote
Navy
Black
White
FURY CUT
AVAILABLE COLORS
Coyote
Navy
Black
White
renegade-armor.com | 540.656.2851
7
REN-TETON / TETON
REN-ATLAS / ATLAS
REN-HAVOC / HAVOC
REN-STEALTH / STEALTH
Rip-stop nylon carrier that’s silent and smooth so it won’t
rub or create friction against outerwear. This two piece
vest uses hook and loop strapping to provide a snug and
secure fit with double strapping at the waist to create the
lowest profile when worn under garments.
The ultimate in concealed comfort, protection, and state-ofthe-art ergonomic design allows 8 to 12 hours wear.
The Havoc surveillance vest is designed for quick
donning for street crimes and counter drug surveillance
units. Light weight and fully adjustable, the Havoc can be
worn comfortably in a vehicle, or thrown on quickly as the
officer exits a vehicle.
Low visibility plate carrier system. This design excels at
operating in environments where you do not want to be
seen as an armored operator, but need rifle protection.
Whether it’s in an openly hostile environment or riding in
a security detail, the Stealth will ensure you are visually
and physically protected. The Stealth has also been
widely adopted by Combat Vehicle Crewman.
FEATURES
• Soft spandex shoulder straps
• Snag free nylon material
• Double waist strapping
FEATURES
• 5”X8” soft trauma pack
• Cool-to-the-touch micro-denier outer fabric
• Body-side wicking-cool mesh
• Adjustable 12 point removable closure system
• Front-loading self-healing zipper loading system
• Internal ballistic suspension system
OPTIONS
• Fixed pocket outer carrier (1984)
• Mission specific MOLLE carrier (Helix)
• Shirt tails
• Special threat plate
AVAILABLE COLORS
Coyote
8
Navy
RENEGADE ARMOR | Products & Services
White
Coyote
Navy
White
FURY CUT
AVAILABLE COLORS
Coyote
Ranger Green
FEATURES
• Very low visual profile
• Front and back hard armor plate pockets
• Use with or without soft armor inserts
OPTIONS
• Special threat plates
• Level III and Level IV plates
• ID placard
• Level III and Level IV plates
• ACE accessories
FURY CUT
Black
• Front to back wrap with overlap protection
• 4-point adjustable vest cover with comfortable mesh
• Heavy duty webbing shoulder strapping
• Bottom loading reinforced front and rear pockets,
for full size plates
• 360o MOLLE attachment points
OPTIONS
AVAILABLE COLORS
Black
FEATURES
Black
MultiCam®
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
renegade-armor.com | 540.656.2851
9
CONCEALABLE ACCESSORIES
SPECIAL THREAT PLATES
OUR NEWEST PARTNER
COMING SOON!
LIGHT FIGHTER SERIES
LEVEL IIIA+
TRUTH SERIES
LEVEL IIIA
Available Sizes:
• 5x8 Full Size, Multi-Curve
• 6x8 Full Size, Multi-Curve
• 7x9 Full Size, Multi-Curve
• Ultra lightweight design
• Semi-rigid to increase mobility
• Exceeds NIJ IIIA standards for multi-round protection
• Weatherproof and sweat proof
• Slim profile
• Stylized graphics
• Available sizes: 5x8, 7x9, 8x10, 8x10 Shooter’s cut
SPECIAL THREAT TESTING
REN-FIREARMS-RD /
FIREARMS INSTRUCTOR
REN-SOC / S
OC
Aimed at keeping firearms instructors safe on the range, this
versatile and fully adjustable MOLLE carrier is designed to
accept the Fury concealable soft armor panels for all-around
ballistic coverage. Plate pockets in front and back allow the
addition of 10” x 12” ballistic plates for the highest level of
protection possible. Constructed of 1000 Denier Nylon with a
mesh inner surface. The webbing accepts MOLLE compatible
attachments and the Velcro panels on the top sections of the
back and front hold ID patches.
The SOC offers an alternate to traditional concealable
carrier. This vest is a fully functional outer carrier with the
appearance of a uniform shirt. The base carrier comes with
two breast pockets. It is a completely customizable armor
carrier, offering options in relation to color, fabric
and features.
FEATURES
• Will accept both soft and hard armor
• MOLLE attachment system
• Fully adjustable for height and girth
• FN 5.7 mm x 28 mm 27 gr HP SS195LF
• FN 5.7 mm x 28 mm 40 gr Blue-Tip SS197SR
• Tokarev 7.62 mm x 25 mm 86 gr Steel Jacket
• Winchester .357 Cal SIG 100 gr Frangible SF
• Winchester 9 mm 127 gr SXT T-Series
• SPEER .357 Cal SIG 125 gr GDHP
• SPEER .357 Cal SIG 125 gr FMJ FN
• SPEER .44 Cal MAG 240 gr SJHP
• NIJ P1 Single-Edged Blade Level 2 E1 & E2
• NIJ S1 Double-Edged Blade Level 3 E1 & E2
NIJ STANDARD 0108.01 THREAT LEVEL PROTECTION
OPTIONS
• Multi-purpose front pockets
• Pepper spray pocket
• Radio pocket
• Handcuff pockets
• Baton pocket
• Badge slit
OPTIONS
• ID placard
• Level III and Level IV plates
AVAILABLE COLORS
Black
10
Red
RENEGADE ARMOR | Products & Services
FURY CUT
NOC CUT
AVAILABLE COLORS
Coyote
Navy
Black
White
renegade-armor.com | 540.656.2851
11
INDUSTRY EXCLUSIVE!
RECYCLE
PROGRAM
Fury side strap
Front
Renegade will issue a $1.00 credit per
lb of Aramid armor. Credits can be used
to purchase any Renegade Armor item.
Renegade will issue documentation of safe
vest destruction to Agency.
NOC side strap
Shoulder strap
Back
CUSTOMIZATIONS
REN-TAILS / SHIRT TAILS
Concealable covers can be customized with laserengraved art provided by customers. Some examples
of previous customization include badges, patches, unit
designations and officer names.
Renegade Armor offers shirt tails that you can tuck in for
added secure vest alignment. The shirt tails are sewn directly
into the seam of your vest ensuring they will not separate
from the carrier even after years of use.
If you have special requirements or questions, please
contact us.
They are made out of the same moisture wicking, antimicrobial fabric that the outer carrier is made from.
RENEGADE ARMOR | Products & Services
Credits will be issued 45 days after receipt
of armor. Spectra and Dyneema weights will
be deducted from package weight, since it is
not recyclable (i.e. if a department sends in
1000 lbs of old vest and 25% of the old vest
is Dyneema, the department will be issued
credit for 750 lbs).
• Credits are good for 2 years
• Agency must ship old armor to Renegade
Laser-engraved pocket on the NOC concealable vest
12
Put all your outdated
armor panels to use for
your agency!
• Agency must coordinate trade in and
weights prior to shipment to Renegade
REN-DLXSTRAPS / DELUXE STRAPS
• Ultra low profile to reduce ‘printing’
• Padded Neoprene for comfort
• Retains elasticity for life of vest
• Wider shoulder straps to distribute weight
AVAILABLE FOR NOC, FURY AND NOC-R
renegade-armor.com | 540.656.2851
13
NOC PLATFORM
REN-DOORNOC /
DOOR NOC
Tactical outer carrier which accommodates
the NOC soft armor insert.
REN-NOC-R /
REN-DOORNOC-R /
NOC-R
DOOR NOC-R
Designed to provide
protection along
the curvature of the
female torso.
Tactical outer carrier
which accommodates the
NOC-R soft armor inserts.
REN-ROC /
ROC
ROC is our DOOR NOC
tactical outer carrier
fully outfitted with
collar, throat, bicep and
groin protection.
REN-NOC / NOC
The NOC is our newest concealable, and
based on positive feedback, has been well
received.We have designed an entire line
of NOC products to match any situation.
14
RENEGADE ARMOR | Products & Services
COMING SOON!
REN-SOC /
SOC
The SOC is our uniform
shirt carrier which
accommodates the four soft
armor inserts of the NOC.
renegade-armor.com | 540.656.2851
15
AGGRESSOR
BREACH
COLOSSUS
LEGION
ASSAULT
HELIX
1984
GSV
DOOR NOC
AEGIS SAPI & MBAV
BANSHEE
RESPONDER
TACTICAL VESTS
Tough situations call for tough solutions. Renegade Armor’s tactical line offers our war-fighters and
protectors the most modern and functional tactical equipment available today. Our tactical line was
developed by focused and constant communication with the operator so that the end result is what
you need to overcome any challenge. Regardless of your mission, our tactical line offers the stability,
scalability and protection you require. From plate carriers to full scale entry vest to solutions for
waterborne operations, Renegade has you covered.
16
RENEGADE ARMOR | Products & Services
renegade-armor.com | 540.656.2851
17
REN-AGGRESSOR / AGGRESSOR
This carrier was designed from the ground up with the
patrol officer or tactical operator in mind. Ideal to be
worn as an outer plate carrier/tactical vest with rifle
hard armor plates. The carrier has integrated front and
back interior adjustable plate pockets that accept Level III
and Level IV 10”x12” shooters cut plates and 10”x12”
rectangle plates.
FEATURES
• Material: 500 Cordura
• Upper left chest dual grommets to accommodate badges
• Easy/quick donning and doffing
• Ideal for law enforcement, SWAT and tactical operations
• Non-slip on shoulder area for secure weapon shouldering
• 2 inch Velcro strip across upper chest for name plate
or patch identifiers
• Front and back of carrier have MOLLE webbing
• 2 quick release buckles on each side
• 4 inch Velcro strip across upper back for identifiers
• Fully adjustable shoulders
• Front and back interior adjustable pockets to
accommodate 10”x12” rifle plates
• Integrated drag handle
18
Ranger Green
REN-COLOSSUS / COLOSSUS
The Breach is the law enforcement version of the USMC
Modular Tactical Vest (MTV) and provides full 360° load
bearing capability in a 2-point emergency release system.
The Colossus side-opening carrier is designed for
maximum coverage and mission versatility while
providing full torso and enhanced coverage.
FEATURES
FEATURES
Black
RENEGADE ARMOR | Products & Services
MultiCam®
• Front to back wrap around protection
• Internal cummerbund
• Over-lapping ballistic shoulder and side protection
• Durable high abrasion resistant fabric
• Front and back hard armor rifle plate pockets
• Side armor plate capability
• Diamond grip rifle retention fabric
• Shoulder wire/hydration guide channels
• 360o MOLLE attachment system
• Drag strap
• Front and back “ID” attachment points
• Lumbar support
• Internal cummerbund
• External cummerbund
• Front and back plate pockets (SAPI or 10”x12”)
• Fully removable ballistic inserts
• Drag straps
• MOLLE webbing
• Communication routing channels
• Front kangaroo pouch
OPTIONS
• ID placard
• MOLLE pouches
• Level III and Level IV plates
• Kangaroo pouch insert
• ACE accessories
OPTIONS
• ID placard
• Level III and Level IV plates
• ACE accessories
BREACH CUT
AVAILABLE COLORS
AVAILABLE COLORS
Coyote
REN-BREACH / BREACH
Coyote
Ranger Green
Black
MultiCam®
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
renegade-armor.com | 540.656.2851
19
REN-LEGION / LEGION
REN-ASSAULT / ASSAULT
REN-HELIX / HELIX
REN-1984 / 1984
The Legion is a fully integrated tactical carrier designed
for Direct Action Operations. The Legion quickly
integrates additional armor protection as the mission
dictates and provides 360° pocket attachment fields for
mission tailoring requirements. The vest can beremoved
without taking it off over the head for rapid access to
administrative pockets or medical treatment to the torso
at the left and right shoulders with the ITW G Hook.
This capability minimizes the risk of breaking the seal
on the user’s protective mask during decontamination
procedures in CBRNE environments.
Built for speed and comfort, the Assault performs where
other vests fail. Utilizing two-point release technology, the
operator is able to ditch this vest in seconds when the
need arises.Whatever your mission is, the Assault will not
let you down.
Convert your concealed vest into a high profile outer
garment with MOLLE attachment system.
Convert your concealed vest into a high profile outer
garment with general use pockets.
FEATURES
FEATURES
• Low intensity special operations design
• Designed to accept Fury concealed ballistic panels
• Front and back MOLLE attachment system
• Hard armor rifle plate pockets front and back
• Durable high-abrasion resistant outer fabric
• Adjustable sides and shoulder closure system
• Body side ballistic panel loading with suspension system
• Internal cummerbund
• Outer carrier designed to accept Fury panels
• Versatile fixed equipment pockets (radio, side-arm
magazines, small general utility)
• Limited back MOLLE attachment points
• 5”x8” soft trauma pack compatible
• Durable high-abrasion resistant outer fabric
• Adjustable sides and shoulder closure system
• Body-side ballistic panel loading with suspension system
• Internal cummerbund
FEATURES
• BALCS cut ballistics
• External MOLLE cummerbund with integrated pouches
• Internal cummerbund
• Exterior bottom loading plate pockets
• Interior side plate pockets
• 3”x9” loop field for patches
• Full side overlap
• Front kangaroo pouch
FEATURES
• Fully adjustable side and shoulder adjustment
• Fully supported ballistic system
• Hard armor plate pockets (front and back)
• Side plate pockets integrated into cummerbund
• 360° MOLLE attachment system
• Adjustable lumbar support
• Two-point release system
• Integrated communication wire routing channels
OPTIONS
• ID placards
• Level III and Level IV plates
• ACE accessories
OPTIONS
OPTIONS
• ID placards
• MOLLE pouches
• Level III and Level IV plates
• Firearms instructor version
• ACE accessories
• Firearms Instructor model
• Standard and custom ID placards
OPTIONS
• ID placards
• Level III and Level IV plates
• ACE accessories
BREACH CUT
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
ASSAULT CUT
AVAILABLE COLORS
Coyote
OD Green
Black
MultiCam®
FURY CUT
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
FURY CUT
AVAILABLE COLORS
Coyote
Red
Black
Ranger Green
Red
20
RENEGADE ARMOR | Products & Services
renegade-armor.com | 540.656.2851
21
REN-GSV / GSV
REN-DOORNOC / DOOR NOC
REN-AEGIS-SAPI / AEGIS SAPI
The Renegade GSV (Global Service Vest) is designed
to meet global needs for a dual purpose vest which
accepts concealable soft armor, but can also be worn as
an external tactical vest. Threat level protection can be
upgraded in a matter of seconds by placing hard armor
plates in the front and rear pockets which are easily
accessible through flaps on the upper part of the vest.
The Door NOC is the overt tactical adaptation of our
revolutionary NOC concealment system. The Door
NOC cover allows users who are already issued a NOC
concealable vest to run the same armor in an overt
application. The Door NOC has MOLLE attachment
points to allow for tactical pocket attachment.
The Aegis SAPI plate carrier is a lightweight carrier
designed for SAPI/ESAPI/Shooter cut plates. It can be
worn with or without custom cut soft armor inserts. The
cummerbund on the Aegis contains 6 pockets that will
hold a range of items such as M4 and .308 magazines,
pistols, and radios.
FEATURES
FEATURES
FEATURES
• High mobility low signature tactical option for the
NOC Style vest
• 360° MOLLE attachment points
• Lightweight
• Can hold full size tactical hard armor
• Accepts side hard armor
• Design allows the use of SAPI/ESAPI/Shooter cut plates
• Lightweight Shoulder pads
• Foam inserts and mesh backing for comfort
• Reinforced bottom loading plate pockets
• 360° MOLLE attachment
• Drag strap
OPTIONS
OPTIONS
• MOLLE pocket system
• Front to back wrap with overlap protection • 4-point adjustable vest cover with comfort mesh • Heavy duty webbing shoulder strapping • Top loading reinforced front and rear pockets
• Heavy duty reinforced drag strap
OPTIONS
• ID placard
• Level III and Level IV plates
• ACE accessories
FURY CUT
AVAILABLE COLORS
Coyote
22
Ranger Green
• ID Placards
• Level III and Level IV plates
• Special threat plates
• Side plate pocket pouches
• ACE accessories
• ID placard
• Level III and Level IV plates
• ACE accessories
Black
RENEGADE ARMOR | Products & Services
MultiCam®
NOC CUT
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
SAPI CUT
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
renegade-armor.com | 540.656.2851
23
REN-BANSHEE / BANSHEE
REN-RESPONDER / RESPONDER
The Aegis MBAV plate carrier is a lightweight carrier
designed for added protection and utility. It’s design
affords the user more pocket attachment and ballistic
coverage. It can be worn with or without a soft armor
insert, allowing the use of stand-alone or ICW plates. The
cummerbund on the Aegis contains six pockets that will
hold a range of items such as M4 and .308 magazines,
pistols, and radios.
The Banshee rifle plate carrier is an ultra lightweight, low
profile, high quality plate carrier designed for protection,
utility, mobility in a compact lightweight design.
Designed for those first at the scene. The Responder is
a lightweight plate carrier built to accept SAPI/ESAPI or
10”x12” Shooter Cut plates. With the use of quick release
buckles, the Responder can be rapidly donned or doffed
in cases where an active shooter is involved. Foam inserts
and mesh backing provide comfort and ventilation.
FEATURES
• Will accept full size or SAPI/ESAPI plates
• Lightweight shoulder pads
• Foam inserts and mesh backing for comfort
• Reinforced bottom loading plate pockets
• 360o MOLLE attachment
• Drag strap
OPTIONS
Coyote
Ranger Green
Black
RENEGADE ARMOR | Products & Services
• 500D Cordura
• Lightweight shoulder pads included
• 360o MOLLE attachment system
• Fully adjustable padded front, back and shoulder areas
• Wire, antenna or hydration hose guides
• Removable cummerbund with interior and exterior
MOLLE for side plates
• Quick release buckle secondary securing system
• Drag handle
• Cummerbund sides that accept soft armor 6”x17”
• Will accept up to 10”x12” Level III and IV ESAPI or
similar plates
FEATURES
• Velcro for ID placard attachment
• MOLLE webbing for pouch attachment on back and sides
• Available in three sizes
• Available in all ballistic packages
• Two point leash attachment
• Two point grab handles
• Front and back placard attachment
• Fully adjustable shoulder and side straps
• Bottom loading plate pocket
OPTIONS
• ID placard
• Level III and Level IV plates
OPTIONS
• ID placards
• Cobra buckles
• ID placard
• ACE accessories
• MOLLE pouches
MBAV CUT
AVAILABLE COLORS
FEATURES
Tested and designed with input from Police K-9 handlers,
the K-9 Tactical Vest may be deployed for any mission.
It is available in 3 sizes, is fully adjustable and provides
protection for the chest, back, sides and abdomen while
still allowing mobility. Our K-9 vest is available in any of
our ballistic packages including Spike 1 and Spike 2.
OPTIONS
• ID Placards
• Level III and LEVEL IV plates
• Special threat plates
• Side plate pocket pouches
• ACE Accessories
24
REN-K9 / K-9 VEST
REN-AEGIS-MBAV / AEGIS MBAV
MultiCam®
SAPI CUT
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
SAPI CUT
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
renegade-armor.com | 540.656.2851
25
TACTICAL ACCESSORIES
ACE (ARMOR COMPONENT ENSEMBLE) SYSTEM
BANSHEE CARRIER ESSENTIALS
REN-BR/ASLT-THROAT
THROAT
REN-BR/ASLT-COLLAR
COLLAR
REN-BANSHEE-SHLDRPD /
HOULDER PADS
S
REN-BANSHEE-QD-CMMRBND / QD CUMMERBUND
REN-BR/ASLT-GROIN
BICEPS
Based on the Modular Tactical Vest (MTV) system.
The ACE accessories can integrate all of the additional
components listed in any combination.
• Split rear collar (provides increased head movement)
• Throat guard
• Bicep protection (adjustable to fit individual user)
• Groin protection
All of the add on extremity armor components can be
quickly added or removed as the mission dictates.
AVAILABLE COLORS
Coyote
26
Ranger Green
REN-KANG-ZIP-POUCH/
KANGAROO ZIPPER POUCH
GROIN
REN-BR/ASLT-BICEP
Black
RENEGADE ARMOR | Products & Services
The ACE accessories are compatible with the
following carriers:
• Aegis MBAV
• Aegis SAPI
• Assault
• Banshee
• Breach
• Colossus
• Door NOC
• Door NOC-R
• GSV
• Havoc
• Helix
• Legion
REN-BANSHEE-CMMRBND /
UMMERBUND
C
REN-KANG-TEOMAG / TWO MAG KANGAROO POUCH
MultiCam®
renegade-armor.com | 540.656.2851
27
REN-BLANKET / BALLISTIC BLANKET
REN-SHIELD / BALLISTIC SHIELD
The Renegade Armor Ballistic Blanket provides a barrier
against fired projectiles as well as fragmentation. Our
Ballistic Blanket is available in a variety of sizes and
ballistic ratings to suit a wide range of user requirements.
Renegade can manufacture custom sizes upon request.
The Entry ballistic shield complies with N.I.J. Standard
0108.01 for a Threat Level IIIA rating.View port included.
OPTIONS
• MOLLE attachment system
• Additional handles
• Laser engraving
• ID placards
28
RENEGADE ARMOR | Products & Services
renegade-armor.com | 540.656.2851
29
POUCHES
Standard pouches are shown below, but many more are available. Feel free to contact us for any pouch requirements.
Our pouches are 100% made in the USA and Berry Compliant.
REN-MOLLE-SLEEVE /
REN-COBRA-DUTYBLT /
MOLLE BELT
COBRA BUCKLE DUTY BELT
Part No: ?
RADIO POUCH, MBITR
The MOLLE belt sleeve slides over any existing duty or
riggers belt. It features two rows of MOLLE webbing for
holster or pouch attachment. Integrated foam and mesh
provides all day comfort.
Sturdy and ideal to be used as a duty belt to
accommodate all of your duty gear. Ideal as a sturdy
range belt to carry your fully loaded sub loads. Features a
Cobra Buckle (AustriAlpin) which offers easy yet secure
fastening and adjustment without threading the belt
through every time it’s taken off and on.
AVAILABLE COLORS
AVAILABLE COLORS
Coyote
Ranger Green
Black
MultiCam®
Coyote
REN- P-MBITR/
Ranger Green
REN-P-MOTORDIO /
REN-P-CUFF /
SMALL RADIO POUCH
HANDCUFF POUCH
REN-P-GP /
REN-P-SOFMED /
ADMIN POUCH
GENERAL PURPOSE POCKET
REN-P-M4SR /
REN-P-PMPSR /
REN-P-ASP /
(Speed Reload, Single)
(Speed Reload, Single)
Black
REN-P-ADMIN /
SOF MED POUCH
CUSTOMIZATIONS
Tactical vests can be customized to include a
variety of placards. Placards can be made in
a range of colors and sizes. We can produce
standard vinyl transfer placards as well as lasercut placards with Glow, IR and a combination of
both for the letters.
IR
Glow
Standard Vinyl
If you have special requirements or questions,
please contact us.
M4 MAG POCKET
30
RENEGADE ARMOR | Products & Services
PISTOL MAG POCKET
ASP POCKET
renegade-armor.com | 540.656.2851
31
HELMETS
Our helmets are produced using advanced molding techniques that produce a more rigid yet
lightweight helmet with true threat level IIIA protection. The ACH line of helmets comes equipped
with a four-point harness system that is highly adjustable to insure user comfort and secure fit.
The Advanced Battle Helmet comes equipped with Team Wendy EPIC pads, Team Wendy BOA
CamFit retention system, OpsCore ACH ARC rails and Wilcox Industries L4 NVG Mount all preinstalled. We are able to provide customizations so contact us if your mission requires a specific
helmet configuration.
32
RENEGADE ARMOR | Products & Services
REN-HELMET-ABH / ABH
REN-HELMET-PASGT / PASGT
The ABH Level IIIA Helmet is manufactured with unique
processing techniques to provide enhanced shell
protection at a lower weight with improved comfort
and mobility.
The PASGT (US Personal Armor System Ground Troops)
helmet is designed to protect against fragments/shrapnel
and other ballistic threats; with improved comfort.
Used by Military, Special Forces, Police and SWAT teams.
FEATURES
FEATURES
• 4-point slide buckle, H-Nape adjustable Chin Strap
with Mil-Spec Padded Liner
• Sizes: S/M and L/XL
• Operator cut around the ears and brow for ease of
use with various communication systems, NVG’s and
weapon optics
• Increased Nape Protection over Maritime cut
• Weight: S/M - 2.9 lbs, L/XL - 3.3 lbs
• Can be fitted with a variety of NVG mounts, side mount
accessory rail systems, chin strap assemblies and
padded shell liners
• High ballistic performance with low weight, using high
tenacity ballistic Aramid fiber
• Threat Level IIIA
• Available with 3 different suspension systems. All have a
4 point chin cup
• Crown Mesh: Crown Mesh with cross straps; with plastic
chin cup
• Leather Ring: Shock Absorption harness, with leather
webbing and leather split chin strap
• Pad: 7 EVA foam pads; with webbing split chin strap
AVAILABLE COLORS
AVAILABLE COLORS
Tan
Ranger Green
Black
(Custom hydro graphic colors and patterns are available upon request)
Tan
Ranger Green
Black
(Custom hydro graphic colors and patterns are available upon request)
renegade-armor.com | 540.656.2851
33
HELMET SIZING
REN-HELMET-ACHI / ACH I
REN-HELMET-ACHII / ACH II
REN-HELMET-ACHIII / ACH III
The ACH I helmet, like the PASGT, provides true threat
level IIIA ballistic protection but eliminates the visor in
the front which allows for better mounting options for
NVG shrouds.
The ACH II has all the same features of the ACH I with the
exception of a slightly higher cut at the ears allowing for
better fit over a variety of communications equipment
This helmet is very popular with Special Forces due
to its greater comfort and higher flexibility in extreme
conditions.We use a 4-point harness with improved
comfort, balance and reduced fatigue. This helmet is
compatible with night vision equipment.
FEATURES
• Threat Level IIIA
• Can be fitted with Ops-Core ACH ARC Rails
• Available with a variety of suspension systems
AVAILABLE COLORS
Tan
Ranger Green
FEATURES
• Threat Level IIIA
• Compatible with most communications equipment
• Can be fitted with NVG Shroud
• Can be fitted with Ops-Core ACH ARC Rails
• Available with a variety of suspension systems
AVAILABLE COLORS
Black
(Custom hydro graphic colors and patterns are available upon request)
34 6 RENEGADE ARMOR | Products & Services
Tan
Ranger Green
FEATURES
• Lightest of all ACH variants
• Threat Level IIIA
• Compatible with most communications equipment
• Can be fitted with NVG Shroud
• Available with a variety of suspension systems
AVAILABLE COLORS
Black
(Custom hydro graphic colors and patterns are available upon request)
Tan
Ranger Green
INCHES
HAT SIZE
CM
21 1/8
21 1/2
21 7/8
22 1/4
22 5/8
23
23 1/8
23 7/8
24 1/4
24 5/8
25
25 1/2
6 3/4
6 7/8
7
7 1/8
7 1/4
7 3/8
7 1/2
7 5/8
7 3/4
7 7/8
8
8 1/8
54
55
56
57
58
59
60
61
62
63
64
65
S/M
L/XL
XXL
(special order only)
BALLISTIC THREAT MATRIX
TEST BULLET
WEIGHT
VELOCITY
9 mm FMJ RN
124 gr
1225 ft/s
40 S&W FMJ
180 gr
1155 ft/s
9 mm FMJ RN
124 gr
1305 ft/s
.357 Mag JSP
158 gr
1430 ft/s
.357 Sig FN
125 gr
1470 ft/s
.44 Mag SJHP
240 gr
1430 ft/s
7.62 mm NATO FMJ
147 gr
2780 ft/s
30 CAL M2 AP
166 gr
2880 ft/s
CUSTOM HYDRO GRAPHIC PATTERNS:
Black
(Custom hydro graphic colors and patterns are available upon request)
• MultiCam
• Kryptek camouflage
• Digital camouflage
• A-TACS camouflage
renegade-armor.com | 540.656.2851
35
HELMET ACCESSORIES
REN-EPICL / HELMET PAD
REN-ACH-RAILKIT / ACH RAIL KIT
REN-ABH-HLMTCVR / HELMET COVER
REN-SHROUD-NVG3 / NVG MOUNT
Team Wendy’s EPIC™ (Enhanced Protection, Individual
Comfort) Helmet Liner System represents a revolution in
helmet pad protection and comfort.
This is the strongest, lowest profile accessory mounting
solution for helmets. It is an improved lower profile version
with added features for the attachment of accessories.
EPIC™ consists of a one-piece protective impact liner,
and 22 adjustable comfort pads provided in four shapes
(oblong, trapezoid, tapered trapezoid and triangle) and two
thicknesses (3/16 in “thin” and 3/8 in “thick”). The comfort
pad set also includes four Ultra Grip™ pads for added
stability and two sweat bands for moisture absorption.
EPIC™’s design offers a significant increase in protection at
high-G impacts without adversely affecting weight or heat
dissipation. EPIC™ employs the same Zorbium® foam proven
through years of service in Team Wendy’s standard ZAP™
products and fits all standard ground combat helmets. The
complete system includes an illustrated instruction manual
included. Velcro® coins not included.
Includes lower dove-tail slot for support of O2 mask,
goggle, and illuminator devices. Provides instant donning
and doffing of mandible and face protection solutions for
the ACH. Compatible with a Single Strap O2 Kit as well
as Double Strap O2 Kit. Snag free for HALO, HAHO and
static line. Uses existing chinstrap mounting holes and is
compatible with MSA and Ops-Core chinstraps. Fits most
ACH/MICH 2000 style helmets in size L. Fits some ACH/
MICH 2000 style helmets in size M. Does not fit any ACH/
MICH helmets in sizes XL or S. Does not fit MICH 2001 (high
ear cut) helmet. Kit includes: left rail, right rail, four 22 mm
screws, four T-nuts, two Picatinny adapters and two WingLoc adapters.
Individually sized and 100% fit tested this Helmet Cover is
designed to fit the ABH Ballistic Helmet from Renegade. A
stretch fit ensures that it remains in place during Free Fall
or Rotary Wing Operations and key areas of the cover have
been manufactured to allow access to night vision mounts
and rail accessories. Loop is positioned in other locations
for attachment of IFF capabilities. Perfect for changing your
helmet’s pattern, preserving its finish and dampening noise
during impact.
The Wilcox 3 hole shroud is the most stable NVG mounting
platform available. Machined aluminum frame where the
mount inserts, polymer outer frame. Compatible with all
modern NVG mounts such as the Wilcox G24, Norotos
AKA2 mount.
AVAILABLE COLORS
AVAILABLE COLORS
AVAILABLE COLORS
AVAILABLE COLORS
Coyote
36
Ranger Green
Black
RENEGADE ARMOR | Products & Services
Coyote
Ranger Green
Black
Coyote
Ranger Green
Black
MultiCam®
Coyote
Ranger Green
Black
renegade-armor.com | 540.656.2851
37
CORRECTIONAL ARMOR
Our Spike1 and Spike2 body armor is specifically designed to help protect corrections officers against hand-made
weapons such as spikes, shivs and shanks. In response to this threat, Renegade Armor offers Spike 1 and Spike 2 level
body armor in all our current vest configurations.
HARD ARMOR
LIGHT FIGHTER SERIES
Our Spike vests provide officers with the protection that they need to stay safe in this environment. The tighter weave of our
panels ensure that they are spike and stab resistant, ensuring that a blade or shiv cannot pass through.
Models Comply with NIJ Standard 0115.00.
CONFIGURATION: STAND-ALONE
THREAT LEVEL: 1 - PROTECTION CLASS: Spike
As a result of independent testing, the following vest
models were found to be in compliance with NIJ
Standard-0115.00 requiring protection against low energy
threats with a strike energy of 24 J (17.7 ft-lbf).
THREAT LEVEL: 2 - PROTECTION CLASS: Spike
As a result of independent testing, the following vest
models were found to be in compliance with NIJ
Standard-0115.00 requiring protection against medium
energy threats with a strike energy of 33 J (24.3 ft-lbf).
THREAT LEVEL: 3 - PROTECTION CLASS: Spike
• NIJ Level 3 Spike/Edge compliant for the corrections,
medical and law enforcement
• Lightweight/thin
• Flexible threat defeating armor that conforms to wearer
• Unlimited coverage options
• Decreases back face trauma from ballistic threat,
ICW soft armor
• Conform to the female wearer
• Multi threat: knives, spikes, needles, razor
Multi-Curve
• Testing Standard: Independent Special Threat Testing
• Protection Type / Level: Special (Handgun / Edged Blade)
• Type of Protective Cover: Polyurea
SPECIAL THREAT TESTING:
Material: 100% Polyethylene
• FN 5.7 mm x 28 mm 27 gr HP SS195LF*
• FN 5.7 mm x 28 mm 40 gr Blue-Tip SS197SR*
• Tokarev 7.62 mm x 25 mm 86 gr Steel Jacket*
• Winchester .357 Cal SIG 100 gr Frangible SF*
• Winchester 9 mm 127 gr SXT T-Series*
• SPEER .357 Cal SIG 125 gr GDHP*
• SPEER .357 Cal SIG 125 gr FMJ FN*
• SPEER .44 Cal MAG 240 gr SJHP*
• NIJ P1 Single-Edged Blade Level 2 E1 & E2*
• NIJ S1 Double-Edged Blade Level 3 E1 & E2*
Thickness: .34" (8.64 mm)
FULL-SIZE*
(FS)
*side plate
SAPI/ESAPI
(SE)
SHOOTER
(SH)
*Special Threat Testing conducted in accordance with an
abbreviated and modified NIJ Standard 0101.06.
PROTECION CLASS
MODEL NAME
THREAT LEVEL
Spike 1
REN-SP1
Low energy threat: strike energy of 24 J
Spike 2
REN-SP2
Medium energy threat: strike energy of 33 J
Spike 3/Edge 3
DSX2-SEM01
High energy threat: strike energy of 65 J
PART #
SIZE
SHAPE
CUT
CURVATURE
WEIGHT
TESTING
REN-1200SA-5x8-FS
5"x8"
Full-Size
0.50"x0.50"
Multi-Curve
0.50 lbs
Independent
REN-1200SA-7x9-FS
7"x9"
Full-Size
0.50"x0.50"
Multi-Curve
0.82 lbs
Independent
REN-1200SA-8x10-SE
8"x10"
SAPI/ESAPI
1.81"x2.61"
Multi-Curve
0.90 lbs
Independent
REN-1200SA-10x12-SE
10"x12"
SAPI/ESAPI
2.33"x3.36"
Multi-Curve
1.26 lbs
Independent
REN-1200SA-10x12-SH
10"x12"
Shooters
2.22"x4.45"
Multi-Curve
1.28 lbs
Independent
Note: Thickness measurements are + / - .10 inches, and Weight measurements are + / - 3%
38
RENEGADE ARMOR | Products & Services
renegade-armor.com | 540.656.2851
39
DRAKKAR SERIES
STREET FIGHTER SERIES
CONFIGURATION: STAND-ALONE
CONFIGURATION: STAND-ALONE
• Testing Standard: NIJ 0101.06
(with the exception of 6x6)
• Protection Type / Level: NIJ III Plus
• Type of Protective Cover: Polyurea
Multi-Curve
• Testing Standard: NIJ 0101.06
(with the exception of 6x6)
• Protection Type / Level: NIJ III Plus
• Type of Protective Cover: Polyurea
Material: Ceramic
and Polyethylene
SPECIAL THREAT TESTING:
• 5.56 mm x 45 mm 62 gr Ball (M855)*
• 7.62 mm x 39 mm 123 gr PS Ball (Mild Steel Core)*
• 7.62 mm x 51 mm 149 gr FMJ (M80)*
Thickness: 1.25" (31.75 mm)
FULL-SIZE*
(FS)
*side plate
SAPI/ESAPI
(SE)
Material: 100% Polyethylene
Thickness: 1.25" (31.75 mm)
SHOOTER
(SH)
PART #
SIZE
SHAPE
CUT
CURVATURE
WEIGHT
TESTING
REN-3200SA-6x6-FS
6"x6"
Full-Size
0.50"x0.50"
Single-Curve
1.52 lbs
Independent
REN-3200SA-10x12-SH
10"x12"
Shooters
2.22"X4.45"
Multi-Curve
4.41 lbs
NIJ Compliant
REN-3200SA-SM-SE
8.75"x11.75"
SAPI/ESAPI
2.06"x3.06"
Multi-Curve
4.05 lbs
NIJ Compliant
REN-3200SA-MD-SE
9.50"x12.50"
SAPI/ESAPI
2.25"x3.25"
Multi-Curve
4.71 lbs
NIJ Compliant
REN-3200SA-LG-SE
10.25"x13.75"
SAPI/ESAPI
2.44"x3.44"
Multi-Curve
5.42 lbs
NIJ Compliant
REN-3200SA-XL-SE
11.00"x14.00"
SAPI/ESAPI
2.63"x3.63"
Multi-Curve
6.14 lbs
NIJ Compliant
Note: Thickness measurements are + / - .10 inches, and Weight measurements are + / - 3%
RENEGADE ARMOR | Products & Services
SPECIAL THREAT TESTING:
• 5.56 mm x 45 mm 55 gr Ball (M193)*
• 7.62 mm x 39 mm 123 gr PS Ball (Mild Steel Core)*
• 7.62 mm x 51 mm 149 gr M80 FMJ*
*Special Threat Testing conducted in accordance with an
abbreviated and modified NIJ Standard 0101.06.
*Special Threat Testing conducted in accordance with an
abbreviated and modified NIJ Standard 0101.06.
40
Multi-Curve
FULL-SIZE*
(FS)
*side plate
SAPI/ESAPI
(SE)
SHOOTER
(SH)
PART #
SIZE
SHAPE
CUT
CURVATURE
WEIGHT
TESTING
REN-3000SA-6x6-FS
6"x6"
Full-Size
0.50"x0.50"
Single-Curve
1.10 lbs
Independent
REN-3000SA-10x12-SH
10"x12"
Shooters
2.22"X4.45"
Multi-Curve
3.22 lbs
NIJ Compliant
REN-3000SA-SM-SE
8.75"x11.75"
SAPI/ESAPI
2.06"x3.06"
Multi-Curve
2.95 lbs
NIJ Compliant
REN-3000SA-MD-SE
9.50"x12.50"
SAPI/ESAPI
2.25"x3.25"
Multi-Curve
3.43 lbs
NIJ Compliant
REN-3000SA-LG-SE
10.25"x13.75"
SAPI/ESAPI
2.44"x3.44"
Multi-Curve
3.95 lbs
NIJ Compliant
REN-3000SA-XL-SE
11.00"x14.00"
SAPI/ESAPI
2.63"x3.63"
Multi-Curve
4.48 lbs
NIJ Compliant
Note: Thickness measurements are + / - .10 inches, and Weight measurements are + / - 3%
renegade-armor.com | 540.656.2851
41
ESAPI ICW SERIES
ROAD BLOCK SERIES
CONFIGURATION: IN-CONJUNCTION WITH IIIA
CONFIGURATION: STAND-ALONE
• Testing Standard: NIJ 0101.06
(with the exception of 6x6)
• Protection Type / Level: NIJ IV Plus (Single-Hit)
• Type of Protective Cover: Polyurea
Multi-Curve
• Testing Standard: Independent Special Threat Testing
• Protection Type / Level: Special (Military)
• Type of Protective Cover: Cordura
Multi-Curve
SPECIAL THREAT TESTING:
Material: Ceramic
and Composite
SPECIAL THREAT TESTING:
• 5.56 mm x 45 mm 62 gr Ball (M855)*
• 5.56 mm x 45 mm 62 gr Ball (M855A1)*
• 7.62 mm x 39 mm 121 gr Armor Piercing Incendiary (API)(BZ)*
• 7.62 mm x 51 mm 150 gr Armor Piercing (AP)(M61)*
• 7.62 mm x 54R mm 155 gr Armor Piercing Incendiary (API)(B32)*
• 7.62 mm x 63 mm 165 gr Armor Piercing (AP)(M2AP)*
*Special Threat Testing conducted in accordance with an
abbreviated and modified NIJ Standard 0101.06.
Thickness: 1.20" (30.48 mm)
FULL-SIZE*
(FS)
*side plate
SAPI/ESAPI
(SE)
SHOOTER
(SH)
PART #
SIZE
SHAPE
CUT
CURVATURE
WEIGHT
TESTING
REN-4200SA-6x6-FS
6"x6"
Full-Size
0.50"x0.50"
Single-Curve
3.10 lbs
Independent
REN-4200SA-10x12-SH
10"x12"
Shooters
2.22"X4.45"
Multi-Curve
8.90 lbs
NIJ Compliant
REN-4200SA-SM-SE
8.75"x11.75"
SAPI/ESAPI
2.06"x3.06"
Multi-Curve
8.20 lbs
NIJ Compliant
REN-4200SA-MD-SE
9.50"x12.50"
SAPI/ESAPI
2.25"x3.25"
Multi-Curve
9.50 lbs
NIJ Compliant
REN-4200SA-LG-SE
10.25"x13.75"
SAPI/ESAPI
2.44"x3.44"
Multi-Curve
10.90 lbs
NIJ Compliant
REN-4200SA-XL-SE
11.00"x14.00"
SAPI/ESAPI
2.63"x3.63"
Multi-Curve
12.40 lbs
NIJ Compliant
Material: Ceramic
and Polyethylene
• 5.56 mm x 45 mm 61 gr Ball (M855)*
• 7.62 mm x 51 mm 149 gr M80 FMJ*
• 7.62 mm x 54R 148 gr Light Projectile Steel (LPS)
• 7.62 mm x 54R mm 160 gr Armor Piercing Incendiary
(API)(B32)*
• 7.62 mm x 63 mm 166 gr Armor Piercing (M2AP)*
Thickness: 1.20" (30.48 mm)
FULL-SIZE*
(FS)
*side plate
*Special Threat Testing conducted in accordance with an
abbreviated and modified NIJ Standard 0101.06.
SAPI/ESAPI
(SE)
PART #
SIZE
SHAPE
CUT
CURVATURE
WEIGHT
TESTING
REN-6200IC-6x6-FS
6"x6"
Full-Size
0.50"x0.50"
Single-Curve
1.87 lbs
Independent
REN-6200IC-SM-SE
8.75"x11.75"
SAPI/ESAPI
2.06"x3.06"
Multi-Curve
4.75 lbs
Independent
REN-6200IC-MD-SE
9.50"x12.50"
SAPI/ESAPI
2.25"x3.25"
Multi-Curve
5.45 lbs
Independent
REN-6200IC-LG-SE
10.25"x13.75"
SAPI/ESAPI
2.44"x3.44"
Multi-Curve
6.25 lbs
Independent
REN-6200IC-XL-SE
11.00"x14.00"
SAPI/ESAPI
2.63"x3.63"
Multi-Curve
7.10 lbs
Independent
Note: Thickness measurements are + / - .10 inches, and Weight measurements are + / - 3%
Note: Thickness measurements are + / - .10 inches, and Weight measurements are + / - 3%
42
RENEGADE ARMOR | Products & Services
renegade-armor.com | 540.656.2851
43
OUR PARTNERS
Renegade Armor is proud to work with these exceptional partners to ensure that our customers
receive the finest equipment and services available.
Mountain Defense Group
179 Mine Ln
Jacksboro, TN 37757
tel: 865.388.2994
mdg.us
Chesapeake Testing
4603 Compass Point Rd
Belcamp, MD 21017
tel: 410.297.8160
chesapeaketesting.com
Shellback Tactical
tel: 844.427.2478
shellbacktactical.com
Tex Tech
1 City Center 11th Floor
Portland, ME 04101
tel: 207.756.8606
textechindustries.com
Goldbelt Wolf
5500 Cherokee Ave
Alexandria, VA 22312
tel: 703.584.8889
goldbeltwolf.com
Propper
17 Research Park Drive
St. Charles, MO 63304
tel: 800.296.9690
propper.com
Beyond Clothing
6363 6th Ave South
Seattle, WA 98108
tel: 800.741.3369
beyondclothing.com
Team Wendy
17000 St. Clair Ave Bldg 1
Cleveland, OH 44110
tel: 216.738.2518
teamwendy.com
Barrday
1450 West Pointe Drive Unit C
Charlotte, North Carolina 28214
tel: 800.667.3725
barrday.com
Saati Americas Corp.
P.O. Box 440, Route 100
10589 Somers, New York
tel: 914.232.7781
saati.com
44
RENEGADE ARMOR | Products & Services
Dupont
1007 Market Street
Wilmington, DE 19898.
tel: 302.774.1000
dupont.com
DSM Dyneema LLC
1101 Highway 27 South
Stanley, NC 28164
tel: 800.883.7404
dyneema.com
Honeywell
tel: 877.841.2840
honeywell.com
Ronin Strategies
tel: 901.336.9906
roninstrategies.com
Wilcox Industries
25 Piscataqua Drive
Newington, NH 03801
tel: 603.431.1331
wilcoxind.com
Angel Armor
4557 Denrose Ct
Fort Collins, CO 80524
tel: 970.235.2961
angelintelligence.com
W
hen the shooting starts and the chips are down, we know that all of
the products you have viewed in this year’s catalog will perform under
pressure. We spend countless hours ensuring we are doing the right
thing for the actual Man or Woman who is wearing the gear. It is not always the
cheapest solution, it is always more costly to produce, but all of us at Renegade
sleep at night knowing our customers are in quality product!
We hope that you will find product in this catalog that will directly meet your
requirement. If there is a need for something to be custom built, keep in mind that
we can design or develop anything to meet your specific mission!
Skip Church & Marcus Treiber
Renegade Armor
10950 Pierson Drive, Suite 700
Fredericksburg, VA 22408
Tel: 540.656.2851
www.renegade-armor.com