Hilti Diamond Coring Brochure 2536.7kB

Hilti Diamond Coring Brochure 2536.7kB

Hilti Diamond Coring Systems
BRILLIANT
PERFORMANCE.
Hilti. Outperform. Outlast.
1
Hilti X-Change module
UNMATCHED FLEXIBILITY.
Three, two, done.
Re-tipping using Hilti’s innovative change module (X-CM) system makes used core bits as
good as new. With the removable Hilti X-Change Ring, re-tipping is simpler, faster, and more
efficient than ever before: just push, twist, click and re-tipping is done. A job that used to take
hours can now be done in just a few minutes. This means greater flexibility on the jobsite,
reduced downtime and the ability to get unstuck quickly, resulting in improved productivity.
Laser welded segments
Ultimate flexibility
Ultimate versatility
Keyless core bit changing
The diamond segments of the X-Change module
are laser welded to avoid breakage and 8mm in
height for added durability.
Choose the ring specification for your base
material:
• Light Masonry (LM)
• Light Concrete Life (LCL)
Choose your barrel length and diameter:
• Available in lengths: 320mm or 430mm
• Available in diameter range: 52mm - 162mm
High quality quick release connection end (BI+) for
easy operation. No tools involved.
(For use with DD 120, DD 130, DD 150-U)
Easy removal
The inner geometry of the ring allows easier
and faster core removal. In standard conditions,
concrete or masonry cores simply slip through the
tube without forceful aid of a hammer, thus greatly
preserving the round shape of the barrel and the
core bit’s lifetime.
Laser welded pins
The barrel’s connecting interface contains laser welded pins
and grooves preventing involuntary ring loss and stability to the
system during handheld drilling on masonry.
“T” shaped locking mechanism
User friendly locking mechanism makes the
X-Change module system easy to use.
Technical data
Hilti X-Change module
Specifications
LCL (Light Concrete Life) and
LM (Light Masonry)
Connection end
BI+
Available lengths
320 and 430 mm
Diameter range
2
52 – 162mm
COST EFFICIENT PERFORMANCE
FAST RE-TIPPING
GET UNSTUCK
ALL YOU NEED IN ONE BAG
The Hilti X-Change module provides
performance that outlasts at a lower cost
per hole, as each barrel can be re-used and
re-tipped up to three rings on average.
Thanks to its smart, geometric design and
removable Hilti X-Change module, re-tipping
is simpler, faster, and more efficient than ever
before. Remove the ring with a screwdriver,
push, twist, click and re-tipping is done!
With the Hilti X-Change module, removal
of stuck cores is easy and effortless – just
disengage the ring and slide the core out
of the barrel.
Say goodbye to bulk. The Hilti X-Change
module’s removable tip makes it possible
for you to pack multiple rings to meet your
specification needs for diameter and base
material in one small, portable bag.
3
Hilti diamond coring systems
Hilti universal vacuum cleaners
THE PERFECT
MATCH.
DD 150-U and
X-CM system.
THEY JUST GOT
EVEN BETTER.
The all new VC 20-U
and VC 40-U.
Versatile and powerful.
Simply one for all.
Power up.
Hand-guided or on the drill stand. Wet or dry. The Hilti
DD 150-U diamond coring system is clearly the ideal solution
for a wide range of drilling applications in concrete or masonry.
Combined with Hilti’s new innovative X-Change module
system and its capability to adapt to a variety of specifications
and base materials, this match in outstanding performance,
efficiency and versatility are simply unique.
Automatic start function
The VC 20-U and the VC 40-U are the ultimate universal
vacuum cleaners for dry and wet applications. Hilti
vacuum cleaners are ideal for collecting fine dust from
a range of applications including: diamond cutting,
grinding, and slitting as well as slurry from coring
tools and other wet cleaning applications.
Plug a tool into the vacuum and
activate the function. The vacuum
will start automatically when the
connected tool is started.
Soft start function
This feature enables a longer
lifetime of the VC 20-U and
VC 40-U, through a slow start
of the turbine.
Automatic cleaning
Fully automatic power filter
cleaning (every 15 sec), providing
the best in class vacuum
performance.
Built-in supply socket
The VC 20-U and VC 40-U
vacuum cleaners are equipped
with a built-in electric supply
socket. Electric tools <1200W
can be connected to the electric
supply by plugging them directly
into the built-in supply socket.
Easy, versatile and durable
Easy access to the filter
compartment.
Available in two optimal sizes –
VC 20-U (20 litre) and VC 40-U (40
litre). Robust trolley and wheels to
tackle any jobsite.
De-activation of filter cleaning
Manually switch off the filter cleaning
and reduce noise emissions.
COMPLETE THE FAMILY
WITH THESE ACCESSORIES
DD 150-U and X-CM core bit starter kits
(see ordering information on p10 for details)
DD 150-U and X-CM Diamond Hand Held Anchor Kit 1*
3531553
DD 150-U and X-CM Diamond Hand Held Anchor Kit 2*
3538825
DD 150 and X-CM Penetration Kit 1 (52mm and 102mm)
3538826
DD 150-U and X-CM Penetration Kit 2 (77mm and 122mm)
3538827
*Fixed diamond ring. No X-Change module function.
4
Item number
Technical data
Weight
Size (L x W x H)
Capacity (Dust / Water)
Power
Power Socket
VC 20-U
VC 40-U
VC 40-U-Y
(Corded/Cordless hybrid)
13.5kg
500 x 380 x 515 mm
25kg / 21L
1200W
Yes
15kg
595 x 380 x 515 mm
40kg / 25L
1200W
Yes
16.9kg
530 x 380 x 670 mm
40kg / 25L
1200W
No
5
Application tool selector
Tool and application table
WE’VE GOT IT COVERED.
A solution for every application.
WE’VE GOT IT COVERED.
A solution for every application.
DD EC-1 diamond coring tool
DIAMETER
Standard core
bit lengths
(mm)
8
10 12 14 15 16 18 20 22 24 25 28 30 32 35 37 40 42 47 52 57 62 67 72 77 82 87 92 102 112 122 132 142 152 162 182 202 205 225 250 300 350 400 450 500 550 600
DD EC-1
150
300
320
DD 120 diamond coring tool
Wet drilling of through-holes in concrete for:
• Pipes for sanitary, heating and air conditioning
installations
• Water supply and waste water pipes
• Openings for cable trays
DD 150-U
320
DD 500-CA DD 350-CA DD 200
TOOL
DD 120
600
430
Drilling anchor holes for:
• Setting large-diameter anchors and
reinforcing bars
• Installing railings and barriers
430
430
DD 150-U diamond coring tool
(hand-guided or on stand)
430
= Optimal
• Drilling accurate anchor and through holes
(8-35mm diameter)
• Anchor setting with reduced noise level (renovation
work in hospitals, commercial and residential
buildings)
• The hand-held DD EC-1 is the fastest diamond drilling
tool of its kind
• Ideal for drilling work in inhabited buildings (clean,
no dust, no penetrating noise, no vibration)
= Capacity
FAST
SIMPLE
DD EC-1 diamond coring tool
DD 120 diamond coring tool
VERSATILE
DD 150-U diamond coring tool
• Penetrations for cables and cable trays
• Through-holes for plumbing, heating and ventilation
pipes or ducts
• Large-diameter anchors and post-installed rebar
• Installation of hand rails, railings or barriers
• Hand-guided dry coring in unreinforced masonry
• Through-holes for plumbing, heating and ventilation
pipes or ducts
DD 200 diamond coring tool
Technical data
Gears
Rated Input
Max drilling range
(hand-held/stand based)
Stand based or handheld
Weight (motor/with stand)
1
1450W
8-35mm/8-35mm
Both
5.7kgs/8kgs
Technical data
Technical data
Gears
2
Rated Input
1600W
Max drilling range
16 - 162mm
(stand based only)
(optimum 37 -122mm)
Stand based or handheld
Stand based
Weight (motor/with stand)
9.8kgs/10.5kgs
Gears
Rated Input
Max drilling range
3
2200W
12 – 162mm
(optimum 12 - 152mm)
Stand based or handheld
Both
Weight (motor/with stand)
8.2kgs/21.5kgs
POWERFUL
DD 200 diamond coring tool
DD 350-CA diamond coring tool
DD 500-CA diamond coring tool
• Drilling penetrations for plumbing and heating pipes or
ventilation ducts
• Drilling corner holes for wall sawing door and window
openings
• Large-diameter holes, e.g. for shafts
• Stitch drilling, e.g. creating openings for cable trays
• Angular drilling, e.g. for the installation of gas pipes
• Blind holes
DD 350-CA diamond coring tool
• Through-holes and penetrations
• Blind holes for setting anchors or post-installed rebar
• Corner holes for sawing
• Manhole openings
• Stitch coring for installing cable trays
• Large openings for drainage water pipes etc.
DD 500-CA diamond coring tool
6
Technical data
Technical data
Technical data
Gears
3
Rated Input
2600W
Max drilling range
25-400mm
(stand based only)
(optimum 52-225mm)
Stand based or handheld
Stand based
Weight (motor/with stand) 13.9kgs/32.2kgs
Gears
10
Rated Input
3600W
Max drilling range
52-500mm
(stand based only)
(optimum 52-450mm)
Stand based or handheld
Stand based
Weight (motor/with stand) 14.4kgs/32.7kgs
Gears
10
Rated Input
5500W
Max drilling range
52-600mm
(stand based only)
(optimum 82-500mm)
Stand based or handheld
Stand based
Weight (motor/with stand) 16.6kgs/34.9kgs
• Through-holes and penetrations
• Blind holes for setting anchors or post-installed rebar
• Corner holes for sawing
• Manhole openings
• Stitch coring for installing cable trays
• Large openings for drainage water pipes etc.
• Ideal for > 500mm diameter coring
• 400V three-phase
7
Hilti diamond tile drilling
Hilti services
WAX NOT WATER.
Introducing the
DD-BH AT diamond
anchor tile.
INDUSTRY
INDUSTRY LEADING
LEADING
SERVICE
SERVICE OFFERING.
OFFERING.
Your
Your daily
daily needs
needs are
are
our
our business.
business.
Applications
• Bathroom accessories and furniture
installation (6mm)
• Bathroom furniture installation (6-14)
• Kitchen cabinet installation
Core removal solution
Optimised diameters
Easy core extraction with wax
refilling option (diameters >10mm).
6mm, 8mm, 10mm, 12mm, 14mm,
20mm for greater versatility.
Hilti Fleet Management.
Cut your administrative overheads.
Control your costs
All inclusive repairs
Fixed monthly cost
Theft coverage
No water needed
Fast drilling and long life
Dry drilling with wax saves time
and gives you a clean jobsite.
Improved productivity and
efficiency.
Cut administration
Streamlined processes
Get the job done faster
Tool upgrades
Know what you have
Tool inventory and labelling
Hilti Lifetime Service.
Anything but business as usual.
2 Years
up to
No Costs period*
Base Materials
Tool
8
6
No
No
Yes
Hex
8
No
No
Yes
Hex
10
12
14
20
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Hex
Hex
Hex
Hex
Tiles, ceramics, natural stone
(very hard materials, granite, marble)
Suitable for use with SFH 22-A, SFC 22-A and SFH 14-A
2 Years
NO
COSTS
Lifetime
REPAIR
COST LIMIT
MANUFACTURER’S
WARRANTY
up to
Lifetime Repair Cost Limit*
Technical data
Diameter (mm)
Cooling Wax re-filling
Core Removal hole
Starting Aid
Connection end
LIFETIME
SERVICE
Lifetime
N
o repair costs incurred for 2 years
from the date of purchase.
• Covers repair or replacement of defective
parts, even parts subject to wear and tear!
• Includes free pick-up and return transport
• Includes Li-Ion tools, batteries and chargers
Dedicated starting aid for dry drilling
on tiles
The all-in-one tile drilling kit includes a dedicated
starting aid for dry drilling on tiles. It is light and
easy to use (fixation, visibility and dust collection)
for precise and clean operation.
Protect your business
from hidden costs.
NO
COSTS
Lifetime
Lifetime
REPAIR
COST LIMIT
MANUFACTURER’S
WARRANTY
2 Years
At the end of the NO COSTS period,
the cost of each repair is capped for
the lifetime of the tool. PLUS paid repairs are
covered for a further 3 month NO COSTS period.
LIFETIME
SERVICE
Lifetime
REPAIR
COST LIMIT
NO
COSTS
Lifetime
MANUFACTURER’S
WARRANTY
up to
Lifetime Manufacturer’s warranty
LIFETIME
SERVICE
2 Years
Tools having faulty workmanship or
materials, are repaired or replaced free of charge for the lifetime of the tool.
LIFETIME
SERVICE
Lifetime
REPAIR
COST LIMIT
NO
COSTS
Lifetime
MANUFACTURER’S
WARRANTY
*Conditions apply. See general conditions and limitations at www.hilti.com.au
9
Hilti ordering information
DD 120 diamond coring tool
DD-BH AT diamond anchor tiles
Ordering designation
Package contents
Item number
DD-BH AT Diamond Anchor Tile for use with SFH 14-A, SFC 22-A and SFH 22-A
DD-BH 6/30 AT Diamond anchor tile
6mm 3 pack
3 x 6mm
DD-BH 8/40 AT Diamond anchor tile
8mm 3 pack
3 x 8mm
DD-BH 10/40 AT Diamond anchor tile
1 x 10mm
DD-BH 12/40 AT Diamond anchor tile
1 x 12mm
2107351
DD-BH 14/40 AT Diamond anchor tile
1 x 14mm
2107352
DD-BH 20/40 AT Diamond anchor tile
1 x 20mm
2107353

2107157
DD-BH 6-10/40 AT Diamond anchor tile
starter kit
2 x 6mm, 2 x 8mm & 2 x 10mm
DD-BH AT All-in-one Diamond anchor
tile starter kit
Starter Kit includes; 2 x 6mm, 2 x 8mm, 2 x 10mm,
③
starting aid, dust collector chambers and wax
2107350

DD 120 Diamond coring tool
starter kit
DD 120 tool, drill stand, supply cord with PRCD and
operating instructions. Supplied in a Hilti tool case.
Plus vacuum baseplate, vacuum pump, anchor
mounting kit and water collection kit
DD-LR-VBP Vacuum baseplate
DD-LR-VBP Vacuum baseplate in cardboard box

361755
232991
2107354
DD150-U Diamond coring tool
DD 150-U Diamond coring tool, built-in PRCD and
operating instructions. Supplied in Hilti tool case

433327
2107314
DD150-U Diamond coring tool
essentials kit
DD 150-U Diamond coring tool, built-in PRCD, drill
stand, anchor mounting kit and operating
instructions. Supplied in Hilti tool case

3531116
DD 150-U and X-CM Diamond
Hand Held Anchor Kit 1*
DD 150-U Diamond coring tool, built-in PRCD,
16/320, 18/320, 20/320, 24/320 and soft Hilti
tool bag
3531553
DD 150-U and X-CM Diamond
Hand Held Anchor Kit 2*
DD 150-U Diamond coring tool, built-in PRCD,
18/320, 24/320, 28/320 and soft Hilti tool bag
3538825
DD 150-U and X-CM
Penetration Kit 1
DD 150-U Diamond coring tool, built-in PRCD, drill
stand, accessory kit, 1 x 102/430 barrel, 2 x 102 LCL
rings, 1 x 52/430 barrel, 2 x 52 LCL rings, tool bag,
screw driver & X-CM ring box
3538826
DD 150-U and X-CM
Penetration Kit 2
DD 150-U Diamond coring tool, built-in PRCD, drill
stand, accessory kit, 1 x 122/430 barrel, 2 x 122 LCL
rings, 1 x 77/430 barrel, 2 x 77 LCL rings, tool bag,
screw driver & X-CM ring box
3538827
SFH 14-A Hammer drill driver kit
SFH 14-A tool, 2 x 3.3Ah Li-Ion batteries, Li-Ion
compact charger. Supplied in Hilti tool case
③
Item number
SFC 22-A Compact drill driver kit
SFC 22-A tool, 2 x 3.3Ah Li-Ion batteries, Li-Ion
fast charger. Supplied in Hilti tool case
3517245
SFH 22-A Hammer drill driver kit
SFH 22-A tool, 2 x 3.3Ah Li-Ion batteries, Li-Ion
fast charger. Supplied in Hilti tool case
3511023
3520281

DD EC-1 diamond coring tool and accessories
Ordering designation
Package contents
DD EC-1 Diamond coring tool
DD EC-1 tool with water collector, 5m supply cord
with built-in PRCD, depth gauge, Hilti spray,

cleaning cloth & operating instructions. Supplied
in Hilti tool box
336743
DD- CR 1 Drilling stand
DD-CR 1 Drilling stand in cardboard box

376281
DD VP-U Vacuum pump
DD VP-U Vacuum pump in cardboard box
③
409000
DD REC-1 Water recycling unit
DD REC-1 Water recycling unit in cardboard box
④
336752
DD REC-1 Water recycling unit filter
REC-1 F Water recycling unit filter

3495382
Package contents
Package contents
Item number


Item number
DD-ST 150-U Drill stand supplied in cardboard box
435666
DD VP-U Vacuum pump supplied in cardboard box
409000


* Fixed diamond ring. No X-Change module.
Core removal, anchoring and water management accessories
(for use with DD EC-1, DD 120 and DD 150-U diamond coring tools)
③
④
377255
Core bits for use with DD EC-1 diamond coring tool
Ordering designation
Item number
Ordering designation
DD-C 8/70 T2 Diamond core bit
336885
DD-C 22/300 T4 Diamond core bit
336873
DD-C 10/150 T2 Diamond core bit *
336887
DD-C 24/300 T4 Diamond core bit
336875
DD-C 12/150 T2 Diamond core bit
336889
DD-C 25/300 T4 Diamond core bit
336876
DD-C 18/300 T2 Diamond core bit *
336900
DD-C 28/300 T4 Diamond core bit
336878
DD-C 22/300 T2 Diamond core bit *
336909
DD-C 30/300 T4 Diamond core bit
336880
DD-C 35/300 T2 Diamond core bit *
336920
DD-C 32/300 T4 Diamond core bit
336881
DD-C 14/150 T4 Diamond core bit
336855
DD-C 35/300 T4 Diamond core bit
336884
DD-C 15/150 T4 Diamond core bit *
336859
DD-C 18/600 T4 Diamond core bit *
301192
DD-C 16/150 T4 Diamond core bit
336861
DD-C 20/600 T4 Diamond core bit *
301194
DD-C 18/150 T4 Diamond core bit
336863
DD-C 22/600 T4 Diamond core bit *
301197
DD-C T4 Diamond core bit:
DD-C 20/150 T4 Diamond core bit *
336869
DD-C 24/600 T4 Diamond core bit
301198
DD-C 16/300 T4 Diamond core bit
336862
DD-C 28/600 T4 Diamond core bit
301201
DD-C 18/300 T4 Diamond core bit
336864
DD-C 30/600 T4 Diamond core bit *
301203
For concrete with mediumhard aggregates and medium
reinforcing content.
DD-C 20/300 T4 Diamond core bit
336870
DD-C 35/600 T4 Diamond core bit *
301207
Item number
Ordering designation
Item number
DD-CB 12 Core breaker
338346*
DD-CB 14 Core breaker
338348*
DD-CB 15 Core breaker
338350*
DD-CB 16 Core breaker
338351*
DD-CB 18 Core breaker
338352*
DD-CB 20 Core breaker
338355*
DD-CB 22 Core breaker
338357*
DD-CB 24 Core breaker
DD-C T2 Diamond core bit:
For concrete with softer
aggregates and low-medium
reinforcing content.

338359*
DD-CB 25 Core breaker
338360*
DD-CB 28 Core breaker
338362*
DD-CB 30 Core breaker
338364*
DD-CB 32 Core breaker
338365*
DD-CB 35 Core breaker
338368*
DD M12 S Anchor Accessory kit
(DD 120 only)
All in one system for anchor mounting
DD M12 L Anchor Accessory kit
(DD 150-U only)
All in one system for anchor mounting

333629
251830
Clamping Nut (DD120)
333477
Hand-held water collection system
(DD 150-U only)

Water collector holder, water dam - small and
medium, slurry hose (3m) and vacuum
connection piece. Supplied in Hilti tool case

409279
Jack screw M12 (DD150-U only)
Quick-locking nut (DD150-U)

409269
Jack screw (DD120)
DD-WMK-BI water collection system
kit (for DD 120/150-U)
10
Item number
Ordering designation
Ordering designation
* Subject to lead time
DD 120 Diamond coring tool
DD 120 tool, drill stand, supply cord with PRCD and
operating instructions. Supplied in a Hilti tool case
DD 150-U diamond coring tool
Drill drivers

Package contents

2107159

Ordering designation

251834
2040915
3495977
11
Hilti ordering information
X-Change module barrel components
Core removal, anchoring and water management accessories
(for use with DD EC-1, DD 120 and DD 150-U diamond coring tools)
Ordering designation
Ordering designation
Item number
Connecting piece
2040612
Slury hose 3m
④
⑤
47298
Water collector holder
2016633
Water dam (small 8-87mm)
④
Water dam (medium 25-162mm)
232204
232221
DWP 10 Water supply unit
⑤
365595
Item number
Ordering designation
Item number
Fixed Diamond Ring 320mm long (diameter 12-47mm)
DD-BI 12/320 LCL Diamond core bit
2097879
DD-BI 28/320 LCL Diamond core bit
2098122
DD-BI 14/320 LCL Diamond core bit
2098111
DD-BI 30/320 LCL Diamond core bit
2098124
DD-BI 16/320 LCL Diamond core bit
2098113
DD-BI 32/320 LCL Diamond core bit
2098125
DD-BI 18/320 LCL Diamond core bit
2098114
DD BI 35/320 LCL Diamond core bit
2098127
DD-BI 20/320 LCL Diamond core bit
2098116
DD BI 37/320 LCL Diamond core bit
2098128
DD-BI 22/320 LCL Diamond core bit
2098118
DD BI 40/320 LCL Diamond core bit
2098129
DD-BI 24/320 LCL Diamond core bit
2098119
DD BI 42/320 LCL Diamond core bit
2098130
DD-BI 25/320 LCL Diamond core bit
2098120
DD BI 47/320 LCL Diamond core bit
2098131
2098132
DD B 42/430+ LCL Diamond core bit
2098135
DD B 37/430+ LCL Diamond core bit
2098133
DD B 47/430+ LCL Diamond core bit
2098136
DD B 40/430+ LCL Diamond core bit
2098134
X-CM 52-162 Single Pack
(1 barrel + 1 ring)
X-CM 52-162 2 Pack
(2 barrel + 2 ring)
DD-BI 52/320 X-Change barrel
2088662
DD-BI 102/320 X-Change barrel
2088670
DD-BI 67/320 X-Change barrel
2088665
DD-BI 112/320 X-Change barrel
2088672
DD-BI 77/320 X-Change barrel
2088667
DD-BI 122/320 X-Change barrel
2088673
DD-BI 82/320 X-Change barrel
2088668
DD-BI 152/320 X-Change barrel
2088676
DD-BI 87/320 X-Change barrel
2096528
DD-BI 162/320 X-Change barrel
2088677
DD-BI 92/320 X-Change barrel
2088669
DD-BI 52/430 X-Change barrel
2088554
DD-BI 102/430 X-Change barrel
2088653
DD-BI 67/430 X-Change barrel
2088557
DD-BI 112/430 X-Change barrel
2088654
DD-BI 77/430 X-Change barrel
2088559
DD-BI 122/430 X-Change barrel
2088655
DD-BI 82/430 X-Change barrel
2088650
DD-BI 152/430 X-Change barrel
2088658
DD-BI 87/430 X-Change barrel
2088651
DD-BI 162/430 X-Change barrel
2088659
DD-BI 92/430 X-Change barrel
2088652
Ordering designation
Item number
320mm Light Concrete Life (LCL) Starter Packs for use with DD 120, DD 130 and DD 150-U Diamond Coring Tools
DD-X 52 LCL X-Change module
2088516
DD-X 92 LCL X-Change module
2088704
DD-X 67 LCL X-Change module
2088519
DD-X 102 LCL X-Change module
2088705
DD-X 77 LCL X-Change module
2088701
DD-X 112 LCL X-Change module
2088707
DD-X 82 LCL X-Change module
2088702
DD-X 122 LCL X-Change module
2088708
DD-X 87 LCL X-Change module
2088703
DD-X 152 LCL X-Change module
2088711
DD-X 52 LM X-Change module
2088375
DD-X 102 LM X-Change module
2088620
DD-X 67 LM X-Change module
2088376
DD-X 112 LM X-Change module
2088621
DD-X 77 LM X-Change module
2088377
DD-X 122 LM X-Change module
2088622
DD-X 82 LM X-Change module
2096596
DD-X 152 LM X-Change module
2088624
DD-X 87 LM X-Change module
2088378
DD-X 162 LM X-Change module
2088625
DD-X 92 LM X-Change module
2088379
DD-BI 52/320 LCL X- Change module
 2098820
 2098836
③ 2098852
DD-BI 67/320 LCL X- Change module
 2098823
 2098839
③ 2098855
DD-BI 77/320 LCL X- Change module
 2098825
 2098841
③ 2098857
DD-BI 82/320 LCL X- Change module
 2098826
 2098842
③ 2098858
DD-BI 87/320 LCL X- Change module
 3539122
 3539323
③ 3539324
DD-BI 92/320 LCL X- Change module
 2098827
 2098843
③ 2098859
DD-BI 102/320 LCL X- Change module
 2098828
 2098844
③ 2098860
X-Change module system accessories
DD-BI 112/320 LCL X- Change module
 2098830
 2098846
③ 2098862
Ordering designation
 2098831
 2098847
③ 2098863
DD-BI 152/320 LCL X- Change module
 2098834
 2098850
③ 2098902
DD-BI 162/320 LCL X- Change module
 2098835
 2098851
③ 2098903
430mm Light Concrete Life (LCL) Starter Packs for use with DD 120, DD130 and DD 150-U Diamond Coring Tools
DD-BI 52/430 LCL X- Change module
 2098526
 2098784
③ 2098802
DD-BI 67/430 LCL X- Change module
 2098529
 2098787
③ 2098805
DD-BI 77/430 LCL X- Change module
 2098771
 2098789
③ 2098807
DD-BI 82/430 LCL X- Change module
 2098772
 2098790
③ 2098808
DD-BI 87/430 LCL X- Change module
 2098773
 2098791
③ 2098809
DD-BI 92/430 LCL X- Change module
 2098774
 2098792
③ 2098810
DD-BI 102/430 LCL X- Change module
 2098775
 2098793
③ 2098811
DD-BI 112/430 LCL X- Change module
 2098776
 2098794
③ 2098812
DD-BI 122/430 LCL X- Change module
 2098777
 2098795
③ 2098813
DD-BI 152/430 LCL X- Change module
 2098780
 2098798
③ 2098816
DD-BI 162/430 LCL X- Change module
 2098781
 2098799
③ 2098817
12
Item number
Light Masonry (LM) Module Rings for use with DD 120, DD 130 and DD 150-U Diamond Coring Tools
X-CM 52-162 3 Pack
(3 barrel + 3 ring)
DD-BI 122/320 LCL X- Change module
Ordering designation
Light Concrete Life (LCL) Module Rings for use with DD 120, DD 130 and DD 150-U Diamond Coring Tools
X-Change modules
Ordering designation
Item number
X-Change module ring component (diameter 52mm-162mm)
Fixed Diamond Ring 430mm long (diameter 12-47mm)
DD B 35/430+ LCL Diamond core bit
Ordering designation
430mm Barrel Component (diameter 52mm-162mm)
for use with DD 120, DD 130 and DD 150-U Diamond Coring Tools
Core bits ( for use with DD 120 and DD 150-U diamond coring tools)
Ordering designation
Item number
320mm Barrel Component (diameter 52mm-162mm)
for use with DD 120, DD 130 and DD 150-U Diamond Coring Tools


③
DD-X-CM-BOX Bit box
Item number

S-SD SL4 Screw driver
Starting Aid DD-SA 52*
2116448

2039278

2069664
Starting Aid DD-SA 67*
2069667
Starting Aid DD-SA 77*
2069669
Starting Aid DD-SA 82*
2069900
Starting Aid DD-SA 87*
2069901
Starting Aid DD-SA 92*
2069902
Starting Aid DD-SA 102*
2069903
Starting Aid DD-SA 112*
2069904
Starting Aid DD-SA 122*
2069905
Starting Aid DD-SA 152*
2069908
Starting Aid DD-SA 162*
2069909

* For use with dry coring
13
Hilti ordering information
DD 200 diamond coring tool
Ordering designation
Package contents
DD 200 Diamond coring tool drive unit
with BL chuck
DD 200 tool only. Supplied in cardboard box
DD 200 Diamond coring tool starter kit
DD 200 tool, drill stand and anchor accessory kit
(M16). Supplied in cardboard box
Core bits – Heavy Concrete Speed (HCS)
for use with DD 200, DD 350-CA, DD 500-CA Diamond Coring Tools
Item number

283494

3538942
DD 350-CA diamond coring tool
Ordering designation
Package contents
Item number
Diamond coring tool DD 350-CA
DD 350-CA tool only. Supplied in cardboard box
DD 350-CA Diamond coring tool
starter kit
DD 350-CA tool, DD-HD 30 drill stand, anchor
accessory kit (M16). Supplied in cardboard box
3538953
DD 350-CA Diamond coring tool and
water management starter kit
DD 350-CA tool, DD-HD 30 drill stand, anchor
accessory kit (M16) and BL water collection
system. Supplied in cardboard box
3538954

2095238

Ordering designation
Item number
Ordering designation
Item number
DD-B 52/430 HCS Diamond core bit
3538805
DD-B 162/430 HCS Diamond core bit
3538820
DD-B 57/430 HCS Diamond core bit*
3538806
DD-B 182/430 HCS Diamond core bit
3538821
DD-B 62/430 HCS Diamond core bit
3538807
DD-B 202/430 HCS Diamond core bit
3538822
DD-B 67/430 HCS Diamond core bit*
3538808
DD-B 225/430 HCS Diamond core bit*
3538823
DD-B 72/430 HCS Diamond core bit*
3538809
DD-B 250/430 HCS Diamond core bit*
3538824
DD-B 77/430 HCS Diamond core bit
3538810
* Subject to lead time
Complete the diamond coring system
Ordering designation
Package contents
Item number
Tools
DD 500-CA diamond coring tool

VC 40-U Universal vacuum cleaner
VC 40-U tool, suction hose, universal filter
and dust bag. Supplied in cardboard box

2114601
* Subject to lead time
VC 20-U Universal vacuum cleaner
VC 20-U tool, suction hose, universal filter
and dust bag. Supplied in cardboard box

2114559
Anchoring and water management accessories*
for use with DD 200, DD 350-CA, DD 500-CA Diamond Coring Tools
DSH 900 Hand-held petrol saw
16" Petrol saw, universal blade and
consumable maintenance kit kit. Supplied in
cardboard box
③
3521381
DSH 700 Hand-held petrol saw
14" Petrol saw, universal blade and
consumable maintenance kit. Supplied in
cardboard box
④
3521380

2047174
Ordering designation
Package contents
Item number
Diamond coring tool DD 500-CA*
DD 500-CA tool only. Supplied in cardboard box
2095273
Ordering designation
Item number
DD-HD 30 Drilling stand

305534
DD-HD30-VBP Vacuum baseplate

305538
DD VP-U Vacuum pump
DD-HD30-SP Spacer


③
DD-WMK-BL Water collection system
305539
③
④
④
337378
Water collector holder (to suit DD-HD 30)
305536
Water dam (medium 25mm-162mm)
232221
DD-SW-77/87-M Sealing ring
⑤
VC 20/40 Adapter plate
409303
Jack screw M16
207322
DD-SW-122/132-M Sealing ring
207323
DD-SW-158/162-M Sealing ring
207325
Water dam (medium/ large 92mm-250mm)
232243
DD-SW-92/102-L Sealing ring
To position Hilti tool cases on top of vacuum
203866

2121564
Anti-static suction hose 36mm x 5m
⑤
VC 20-U Plastic bag (5 pack)
203854
VC40-U Plastic bag (5 pack)
203856
VC 20/40 Accessory set
VC 20/40 Dry filter
Suitable for wet and dry applications
2121387
207333
VC 20/40 PTFE Performance filter
Suitable for heavy duty concrete dust and wet
applications
436058
DD-SW-122/132-L Sealing ring
207335
VC 20/40 HEPA filter
203879
DD-SW-158/162-L Sealing ring
207337
Suitable for fine dust particles and wet
applications
DD-SW-225-L Sealing ring
207341
Quick-locking nut
251834
Replacement Starter Ropes (Five pack)
412230
Replacement poly-V belt for DSH 700/14”
359476
Replacement Self-tensioning belt 700/14”
* Contact Hilti for the complete diameter range
For DSH 700 with no self-tension window
2113710
Replacement poly-V belt for DSH 900/16”
Replacement Self-tensioning belt 900/16”
Item number
Ordering designation
Item number
3538596
DD-B 82/430 HCS Diamond core bit
3538811
DD-B 28/430 H2S Diamond core bit
3538597
DD-B 87/430 HCS Diamond core bit*
DD-B 30/430 H2S Diamond core bit
3538598
DD-B 92/430 HCS Diamond core bit*
DD-B 32/430 H2S Diamond core bit
3538599
DD-B 35/430 HCS Diamond core bit
3538600
DD-B 37/430 HCS Diamond core bit
Precisely positioned diamonds
provide a constant high drilling
performance on reinforcement
359477
For DSH 900 with no self-tension window
2113711
DC-D Cutting disc 350/25 universal performance
425783
DC-D Cutting disc 400/25 universal performance
425787
DC-D Cutting disc 350/25 concrete (reinforced) special performance
2030469
3538812
DC-D Cutting disc 400/25 concrete (reinforced) special performance
2030477
3538813
DC-D Cutting disc 350/3.2/25.4 asphalt, bitumen
DD-B 102/430 HCS Diamond core bit
3538814
DC-D Cutting disc 400/3.2/25.4 asphalt, bitumen
DD-B 112/430 HCS Diamond core bit
3538815
3538601
DD-B 122/430 HCS Diamond core bit
3538816
DD-B 40/430 HCS Diamond core bit*
3538602
DD-B 132/430 HCS Diamond core bit*
3538817
DD-B 42/430 HCS Diamond core bit
3538803
DD-B 142/430 HCS Diamond core bit*
3538818
DD-B 47/430 HCS Diamond core bit*
14
3538804
DD-B 152/430 HCS Diamond core bit
3538819
Specially Designed for
Powerful Applications
③
2044213
VC 20/40 Universal filter
DD-B 25/430 H2S Diamond core bit*

203867
Big wheel set (VC40-U)
2121386
Ordering designation

2044211

Suitable for dry concrete dust and wood dust
Core bits – Heavy Concrete Speed (HCS)
for use with DD 200, DD 350-CA, DD 500-CA Diamond Coring Tools
④
2044214
Suction hose 36mm x 5m
207320
DD-SW-102/117-M Sealing ring
VC 40-U Push bar
VC 20-U Push bar
2040916
DD M16 Anchor accessory kit
③
Accessories
409000
For core bits >300mm (increments of 150mm)

360640
360641
DD-BL-ET 300mm Core bit extension
Minimum diameter 62mm (DD 120 - DD 150-U)
④
305903
DD-BI-ET 300mm Core bit extension
Minimum diameter 55mm (DD 200-DD 500-CA) ⑤
220929
Adapter BS/BL Core bit adaptor 1¼"
BS to BL
For using Hilti BL core bits on 1¼"
BS competitor chucks
⑥
284891
Adapter BS/BI Core bit adaptor 1¼"
BS to BI
For using Hilti BI core bits on 1¼"
BS competitor chucks
⑦
373422
④
⑤
⑥
⑦
15
Contacting Hilti
HOW TO GET IN TOUCH.
There are a number of ways
to contact Hilti.
Customer Service
Customer Service representatives are available Monday to Friday from 7:30am to
5:00pm. Our professionally trained team can help you with product advice, orders
and deliveries, as well as organising on-site product demonstrations.
Call: 131 292
Fax: 1300 135 042
Email: [email protected]
Hilti Centres
With stores located nationally, Hilti Centres are much more than display or sales
points for Hilti products. At a Hilti Centre, you can receive professional advice on
products and applications. You can also have hands-on demonstrations of Hilti
products. Take a look at our list of Hilti Centres for a location near you.
Visit: www.hilti.com.au
Hilti Online
7 days a week, 24 hours a day. Use the website at your own convenience during
and after office hours, with quick access to product information and pricing.
Register to order online, review your order history, see your tool list and more.
Take advantage of our free delivery for online ordering today!
Visit: www.hilti.com.au
Account Managers
Professionally trained Account Managers are readily available nationwide, to visit
your place of work, where and when you want. By arranging a visit to you, they
can help evaluate your job requirements and suggest ways to increase your
productivity and profitability.
Call: 131 292
Sydney – Lidcombe
35 Parramatta Road,
Lidcombe NSW 2141
Mon – Fri 7.00am – 5.00pm
Melbourne
203-205 Normanby Road,
South Melbourne VIC 3205
Mon – Fri 7.00am – 5.00pm
Townsville
Unit 8/264 Woolcock Street,
Currajong QLD 4812
Mon – Fri 7.30am – 4.30pm
Perth
150 Abernethy Road
Belmont WA 6104
Mon – Fri 7.00am – 5.00pm
Sydney – Annandale
245a Parramatta Road,
Annandale NSW 2038
Mon – Fri 7.00am – 4.00pm
Brisbane
718 Kingsford Smith Drive,
Hamilton QLD 4007
Mon – Fri 7.00am – 5.00pm
Cairns
29 Hannam Street,
Cairns QLD 4870
Mon – Fri 7.30am – 4.30pm
Hobart
56A Hopkins Street,
Moonah TAS 7009
Mon – Fri 7.30am – 4.30pm
Newcastle
70-72 Orlando Road,
Lambton NSW 2299
Mon – Fri 7.00am – 4.00pm
Gold Coast
Unit 4/45 Nind Street,
Southport QLD 4215
Mon – Fri 7.00am – 4.00pm
Adelaide
52 Richmond Road,
Keswick SA 5035
Mon – Fri 7.00am – 5.00pm
Darwin
32 Benison Road,
Winnellie NT 0820
Mon – Fri 7.30am – 4.30pm
Hilti. Outperform. Outlast.
Hilti (Aust.) Pty Ltd I Level 5, 1G Homebush Bay Drive I Rhodes I NSW 2138 I T 131 292 I F 1300 135 042 I www.hilti.com.au